| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| K15K | US probe | 1 | |
| PSR10H13 | US PROBE | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98F34103003000 | FLUSHING TOOL-PITOT PROBE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S53305006000 | HOUSING/HANDLING PROBE DEVICE | 1 | |
| 1 SET | FLAT BOTTOM ROTATING PROBES(FOR OLYMPUS MINI MITE) | 1 | |
| 10022626 | SONDICATOR PROBE (FOR ULTRASOUND) 1.25-IN SONDICATOR CONTACT PROBE WITH 1/2-IN SPACING REPLACEABLE TORLON PROBE TIPS, 2-PIECE PLASTIC ELEMENTS,AND ALARM INDICATING LIGHT FOR USE WITH S-21R & MIZ-21SR INSTRUMENTS. 8 FT CABLE LENGTH. (MADE BY ZETEC INC.) | 1 | |
| 10L16-4.96X2-A00-P-2.5-OM | STANDARD PHASED-ARRAY PROBE, 10 MHZ LINEAR ARRAY, 16 ELEMENTS, 0.012 IN. (0.31MM) PITCH (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| 10L16-A00 | STANDARD PHASED-ARRAY PROBE, 10 MHZ LINEAR ARRAY, 16 ELEMENTS, 0.012 IN. (0.31MM) PITCH (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| 10L64-19.8X5-A-P-2.5-OM | PA PROBE - CUSTOM PHASED ARRAY PROBE-U8330191 | 1 | |
| 1173T183-2 AND 1173T212 | HOWELL HEATER PROBE - USED TO TEST OVERHEAT SWITCH PART NUMBERS | 1 | |
| 1289950 | DEFECTOMETER SURFACE PROBE, STRAIGHT, 3" WITH .5" LONG TIP AND 2.5" HANDLE, SHIELDED, AUSTENITIC, 2M | 1 | |
| 170-09700-709-32H1 | PROBE ADJUSTMENT TOOL | 1 | |
| 178-360 | USB AIR PROBE TEMPERATURE STICK WITH INTERNAL THERMISTOR | 1 | |
| 2-069-69-0001 | FLEX 8 MM CONDUCTIVITY PROBE, 90° ADJUSTABLE HEAD (± 3,977.00 3,977.00 110°) 2.069.69-0001 | 1 | |
| 2-154-301 | PROBE-FE AUST FLAT TYPE FOR DEFECTOMETER | 1 | |
| 2-835-03-6902 | AIRBUS PROBE A330 57-54-02 FIG 603 PG 608 | 1 | |
| 2-835-07-6901 | PROBE NFE SHIELDED (AIRBUS) | 2 | |
| 2.070.69-0001 | 8MM CONDUCTIVITY FLEX PROBE ADJUSTABLE HEAD | 1 | |
| 2.835.01-2000 | Defectometer Surface Probe, Straight, 5", Shielded, Non-ferrous, Shielded | 1 | |
| 2.835.01.2100 | DEFECTOMETER SURFACE PROBE, 90°, .4" DROP, 7" LONG, .156" SHAFT, SHIELDED, NON-FERROUS, 25° BEND APP | 1 | |
| 2.835.01.3000 | DEFECTOMETER SURFACE PROBE, STRAIGHT, 3" WITH .5" LONG TIP AND 2.5" HANDLE, SHIELDED, AUSTENITIC, 2M | 1 | |
| 23 | Tesa 03230200 GTL 21 USB / USB Probes ± 2 mm, 4,3 mm range (GTL21USB) | 1 | |
| 2213052 | 8MM CONDUCTIVITY FLEX PROBE ADJUSTABLE HEAD | 1 | |
| 21110112 | STUD PROBE AIRBUS | 1 | |
| 21200200 | BEARING RADIUS INSP PROBE: PROBE 0.020 | 1 | |
| 27-1-3897A | PLATE ADJUSTEMENT BRUSH BLOCK AND PICK-UP PROBE 27.1.3897.01 | 1 | |
| 29P111 | PROBE-NONFERROUS SHIELDED | 1 | |
| 29P135 | PROBE FOR HOCKING LOCATOR UH SHIELDED FERROUS RIGHT | 1 | |
| 29P311 | PROBE NONFERROUS PENCIL FOR LOCATOR TYPE UH NEW P/N | 1 | |
| 29P331 | PROBE FOR HOCKING LOCATOR UH SHIELDED FERROUS | 1 | |
| 2P243 | PROBE NONFERROUS | 1 | |
| 30-801-1012 | Sylvac 30-801-1012 Transducer Probe P12D USB | 1 | |
| 30-801-1018 | Sylvac 30-801-1018 Transducer Probe P12D with USB Connector Low Force | 1 | |
| 30-801-2017 | Sylvac 30-801-2017 Transducer Probe P12D with USB Connector Low Force | 1 | |
| 30-804-1300 | Sylvac 30-804-1300 D300S Display Unit 2 Probes 6USB | 1 | |
| 30-804-1320 | Sylvac 30-804-1320 D300S Display Unit 4 Probes 6USB | 1 | |
| 310P34 | PROBE-NONFERROUS | 1 | |
| 314P44 | PENCIL PROBE NON FERROUS SHIELD | 1 | |
| 387-010-806 | PROBE SHOE FOR 0.19 INCH (4.83 MM) RADIUS PARTS | 1 | |
| 387-010-807 | PROBE SHOE FOR 0.12 INCH (3.05 MM) RADIUS PARTS | 1 | |
| 387-010-808 | PROBE SHOE FOR 0.064 INCH (1.63 MM) RADIUS PARTS | 1 | |
| 389-024-400 | UT PROBE FOR INSP USED | 1 | |
| 39DLP-EN-BASEKIT-XX | 39DL PLUS EVIDENT WITH SINGLE ELEMENT DELAY LINE AND DUAL ELEMENT PROBE | 1 | |
| 45-127-1 | Custom Probe Locating Bushing Tool Figure 1 Page 6 Item #1. Material 2024-T3 Aluminum. | 1 | |
| 45-127-2 | Custom Probe Locating Bushing Tool Figure 1 Page 6 Item #2. Material 2024-T3 Aluminum. | 1 | |
| 5031T68G01 | PROBE, PRESSURE-TURBINE EXHAUST GAS | 1 | |
| 51 2B | FLUKE 51 II WIRED DIGITAL THERMOMETER FOR INDUSTRIAL USE, E, J, K, T PROBE, 1 INPUT(S), +1372°C MAX, | 2 | |
| 53-20-165/2 | RADIUSED ULTRASONIC PROBE SHOE USED WITH K5K AND REFERENCE STANDARD 53-20-165/1 (BAe 146 Series) | 1 | |
| 53-20-167/2 | BAE PROBE RADIUSED SHOE, 146-RJ 53-238 53-20-21 PT 4 FIGURE 4&5 PAGE 519 & 512. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-171/2 | RADIUSED ULTRASONIC PROBE SHOE USED WITH K5K(AFC-525-7S) AND REFERENCE STANDARD 53-20-165/1 (BAe 146 Series). Includes Certificate of Conformance. | 1 | |
| 5L16-A00 | STANDARD PHASED-ARRAY PROBE, 5 MHZ LINEAR ARRAY, 16 ELEMENTS, 0.012 IN. (0.31 MM) PITCH (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| 620-546-008 | PROBE ROTATING 1/8 DIFFERENTIAL AJUSTAVEL - ESCAREADO. | 1 | |
| 67321-26-190, 67321-10-190, 67321-15-250 AND 67321-27-250 | HOWELL HEATER PROBE - USED TO TEST OVERHEAT SWITCH PART NUMBERS | 1 | |
| 6798143 | PLENUM – AIR INLET COMPRESSOR (USE WITH 6798142 PROBE) | 1 | |
| 7012000H01T502 | Probe - Paddle (For Use On NGS System) | 1 | |
| 7637987-19 | CUSTOM SPO-2664 SLIDING PROBE FIXTURE USED WITH DC-10 REFERENCE STANDARD 7637987-15 Includes Certificate of Conformance | 1 | |
| 80PK-3A | SURFACE PROBE (USE WITH 80T-K AND GSB2400001) | 6 | |
| 815P093 | REFLECTION SPOT PROBE, Ø.984" HIGH X .630" OD, 100-500HZ, ALUMINUM HOUSING, USED WITH 99F57204140000 | 1 | |
| 831368-1 | EXHAUST TAILPIPE (16 PROBES) | 1 | |
| 9117789 | BONDMASTER CABLE - SBM-CPM-P11 11 PIN TO 11 PIN CABLE USED ON PITCH CATCH AND MIA PROBES | 1 | |
| 9117790 | SBM-CR-P6: 11 PIN TO 6 - PIN CABLE (USE WITH RESONANCE PROBES | 1 | |
| 920700-1-1 | LVDT PROBE I/B ADJUSTMENT | 1 | |
| 920702-1-1 | LVDT PROBE 0/B ADJUSTMENT | 1 | |
| 9213013 | EDDY CURRENT PROBE OLYMPUS P/100KHZ-500KHZ/A/905/6 | 1 | |
| 9216153.01 | PROBE OLYMPUS 156 | 1 | |
| 9216154.01 | PROBE OLYMPUS 187 | 1 | |
| 9216156.01 | PROBE OLYMPUS 250 | 1 | |
| 9216158.01 | PROBE OLYMPUS 312 | 1 | |
| 9217153 | ROTATING PLASTIC PROBE 4.7 MM - 5.5 MM (0.187 IN. - 0.218 IN.)(OLYMPUS) | 1 | |
| 9217154 | ROTATING PLASTIC PROBE 5.5 MM - 6.5 MM (0.218 IN. - 0.250 IN.)(OLYMPUS) | 1 | |
| 9217155 | ROTATING PLASTIC PROBE 6.5 MM - 7.1 MM (0.250 IN. - 0.281 IN.)(OLYMPUS) | 1 | |
| 9217156 | ROTATING PLASTIC PROBE 7.1 MM - 7.9 MM(0.281 IN. - 0.312 IN.)(OLYMPUS) | 1 | |
| 9217157 | ROTATING PLASTIC PROBE 7.9 MM - 9.5 MM (0.312 IN. - 0.375 IN.)(OLYMPUS) | 1 | |
| 9219978 | ADJUSTABLE ROTARY PROBE | 1 | |
| 9219979 | OLYMPUS EDDY CURRENT PROBE | 1 | |
| 9219980 | ADJUSTABLE ROTARY PROBE | 1 | |
| 9219981 | ADJUSTABLE ROTARY PROBE | 1 | |
| 9219982 | ADJUSTABLE ROTARY PROBE | 1 | |
| 9219983 | ADJUSTABLE ROTARY PROBE | 1 | |
| 9219984 | ADJUSTABLE ROTARY PROBE | 1 | |
| 9222164 | OLYMPUS ML/100KHZ-500KHZ/A/90.5/6 PROBE | 3 | |
| 9222202 | OLYMPUS ML/100KHZ-500KHZ/A/0.0/4 PROBE | 2 | |
| 9222340 | OLYMPUS CONDUCTIVITY PROBE ITEM NO:U8690027 | 2 | |
| 9222340.1 | CONDUCTIVITY PROBE FOR USE WITH NORTEC 500C,500S,500D,1700,2000,3000 AND W/S INSTRUMENTS. #9222340.10 | 1 | |
| 9230061 | OLYMPUS UNIVERSAL ROTARY HOLE PROBE | 1 | |
| 9230078 | ROTATING PLASTIC PROBE 3.9 MM - 4.7 MM (0.156 IN. - 0.187 IN.) (OLYMPUS) | 1 | |
| 9230374 | 16-PIN LEMO TO DUAL MD FOR REFLECTION ADJUSTABLE SLIDING PROBES P/N 9230374, 1 MICRODOT OR BNC | 1 | |
| 9230531 | ADJUSTABLE ROTARY PROBE | 1 | |
| 9230784 | ROTATING PLASTIC PROBE 3.2 MM - 3.9 MM (0.125 IN. - 0.156 IN.)(OLYMPUS) | 1 | |
| 9230982 | PROBE ADJUSTABLE (2-SINGLE PIN MICRODOT) | 1 | |
| 9316874 | MIA PROBE HOUSING - BMM-H - 9316874 - (U8770417) | 1 | |
| 9317811 | RESONANCE PROBE S-PR-6 (OLYMPUS) | 1 | |
| 9322075 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 | |
| 9429M49G01 | FIXTURE, PULLER FOR EXHAUST GAS TEMPERATURE PROBE | 4 | |
| 9429M49P01 | FIXTURE, PULLER FOR EXHAUST TEMP PROBE | 1 | |
| 98A10001005000 | COVER – PROBE, PITOT (AIRBUS) | 30 | |
| 98D10103500001 | COVER-STATIC PROBE AIRBUS | 24 | |
| 98D10103501000 | COVER - ICE DETECTION PROBE ( THIS TOOL IS USED TO PROTECT THE TWO ICE DETECTION PROBES. ) | 23 | |
| 98F341 | FLUSHING TOOL-PITOT PROBE | 1 | |
| 98F34103003000 | FLUSHING TOOL-PITOT PROBE | 28 | |
| 98F34103003000(REV.B) | FLUSHING TOOL-PITOT PROBE | 1 | |
| 98F341030030000 | PITOT PROBE FLUSHING TOOL | 1 | |
| 98F341030030001 | FLUSHINGTOOL-PITOTPROBE | 1 | |
| 98S53305006-000 | HOUSING/HANDLING DEVICE FOR PKA 19-5 PROBE | 3 | |
| 98S53305006-001 | HOUSING/HANDLING DEVICE FOR PKA 19-5 PROBE | 1 | |
| 98S53305006000 | Probe Housing Handling | 3 | |
| 98S53305006001 | Probe Housing Handling | 1 | |
| 98S53305006200 | HOUSING/HANDLING PROBE DEVICE | 1 | |
| 98S53305006202 | HOUSING/HANDLING PROBE DEVICE | 1 | |
| 99A57004001286 | AIRBUS A300-600 PROBE HOLDER PART 4 57-21-79 PAGE 403 FIGURE 402. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57004001306 | AIRBUS A300-600 PROBE HOLDER PART 6 57-21-43 PAGE 605 FIGURE 602. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57204101000 | AIRBUS PROBE GUIDE A318/A319/A320/A321 Part 6 57-26-54 Page 605 Figure 603. Material: Delrin. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F54503000000 | CALIBRATION BLOCK SHAFT-ADJUSTABLE MINI ROTATING PROBE | 2 | |
| 99F57204118000 | AIRBUS PROBE GUIDE A340 PT 6 57-26-08. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57204122000 | AIRBUS PROBE GUIDE A340 PT 6 57-26-09. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57204125000 | AIRBUS PROBE GUIDE A330 Part 6 57-26-08-PB6 Page 6 Figure 57-26-08-991-017-A Sheet 1. Material: Delrin. Includes Test Report and Certificate of Conformance. | 2 | |
| 99L57203007000 | Airbus Standard A380 57-11-03 Probe Guide | 1 | |
| 99L57203008000 | Airbus Standard A380 57-11-03 Probe Guide | 1 | |
| A-5003-7676 | Renishaw A-5003-7676 STYLUS M6 DIA .125" ZI PROBE 0066 | 1 | |
| A-5003-7677 | Renishaw A-5003-7677 STYLUS M6 DIA .25" ZI PROBE 0068 | 1 | |
| A-5003-7678 | Renishaw A-5003-7678 STYLUS M6 DIA 3MM ZI PROBE 0065 | 1 | |
| A-5003-7679 | Renishaw A-5003-7679 STYLUS M6 DIA 6MM ZI PROBE 0067 | 1 | |
| A24404 | PROBE TIP FOR USE WI | 2 | |
| A5020 | SHEAR WAVE PROBE – OLYMPUS A5020(U8438003), 45 DEGREE ,5 MHZ | 2 | |
| A5020(U8438003) | SHEAR WAVE PROBE – OLYMPUS A5020(U8438003), 45 DEGREE ,5 MHZ OR EQUIVALENT | 1 | |
| A71049-1 | ADAPTER, PT2 PROBE - USE POST PW S/B 73-175 | 13 | |
| AB34001-D2Q | FLUSHING TOOL-PITOT PROBE | 1 | |
| ACL-125 | CUSTOM PROBE COLLAR, .125"Ø THRU HOLE, .500"Ø TIP OD, .750"Ø BODY OD. MATERIAL: BLACK DELRIN(ACETAL). 1823427 | 1 | |
| ACPK-HAWKER | Hawker Kit; nose/main standards and probes. *Customer to supply wheels. | 1 | |
| ACPK-MD11 | MD11 Kit; nose/main standards and probes. Customer to supply wheel. | 1 | |
| AF- 4120 | LOW FREQUENCY RING PROBE, 10KHZ-100KHZ, REFLECTION, .405"ID, .800"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. USED WITH REFERENCE STANDARD: NDT1102-100 TI | 1 | |
| AF-3014-.816 | MANUAL BOLT HOLE PROBE WITH COLLAR, DIFFERENTIAL 25 KHz, .814"Ø(20.7mm) OD, 5.25" LONG SUPPLIED WITH A TRIAX FISCHER / LEMO PUSH / PULL CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3014-UX.810 | ADJUSTABLE ROTARY UNIVERSAL ABSOLUTE/REFLECTION PROBE 25 KHZ 5.25" LONG, 0.810" (20.5mm) DIAMETER. 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3015-.880 | MANUAL BOLT HOLE PROBE WITH COLLAR, DIFFERENTIAL, 25 KHz, .880"Ø(22.3mm) OD, 5.25" LONG SUPPLIED WITH A TRIAX FISCHER / LEMO PUSH / PULL CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3016-.960 | MANUAL BOLT HOLE PROBE WITH COLLAR, DIFFERENTIAL, 25 KHz, .957"Ø(24.3mm) OD, 5.25" LONG SUPPLIED WITH A TRIAX FISCHER / LEMO PUSH / PULL CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3016-UX.960 | ADJUSTABLE ROTARY UNIVERSAL ABSOLUTE/REFLECTION PROBE 25 KHZ 5.25" LONG, 0.960" (24.3mm) DIAMETER. 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3017-1.120/1.240 | ADJUSTABLE MANUAL BOLT HOLE "X"-PROBE WITH A SLEEVE, 25-50KHz ABSOLUTE, 1.120"-1.240" OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3017-1.235/1.355 | ADJUSTABLE MANUAL BOLT HOLE "X"-PROBE WITH A SLEEVE, 25-50KHz ABSOLUTE, 1.235"-1.355" OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3017-1.565/1.685 | ADJUSTABLE MANUAL BOLT HOLE "X"-PROBE WITH A SLEEVE, 25-50KHz ABSOLUTE, 1.565"-1.685" OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3110-1.120/1.240/FX | ADJUSTABLE FLEXIBLE MANUAL BOLT HOLE "X"-PROBE WITH A COLLAR, 25-500KHz REFLECTION, 1.120"-1.240" OD, 9.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3110-1.565/1.685/FX | ADJUSTABLE FLEXIBLE MANUAL BOLT HOLE "X"-PROBE WITH A COLLAR, 25-500KHz REFLECTION, 1.565"-1.685" OD, 9.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4000/TI | LOW FREQUENCY REFLECTION PROBE 1-15K, ID.550 OD .900 HEIGHT 1.1 TI, RADIUS 1/8 TEST @1-1.5KHZ (NDT3225) Includes Test Report and Certificate of Conformance | 1 | |
| AF-4011 | LOW FREQUENCY REFLECTION SPOT PROBE 500HZ-100KHZ.400"OD, USE WITH NDT396 TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4039 | LOW FREQUENCY ADJUSTABLE SLIDING PROBE, REFLECTION, 2 SINGLE MICRODOT CONNECTORS, 100HZ-50KHZ(RM7). Includes Test Report and Certificate of Conformance. 9230982 | 1 | |
| AF-4039-1 | LOW FREQUENCY ADJUSTABLE SLIDING PROBE, REFLECTION, SUPPLIED WITH 2 SINGLE MICRODOT CONNECTORS, 100Hz-40KHz. SIZE DIMENSIONS: 1.75" LONG x 1.0" WIDE. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4041 | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .50" inches and diameter of .300" to .320" inches. Flat at the end. Used with ANDT3016-B reference standard. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4041/4F | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .50" inches and diameter of .300" to .320" inches, 4 Pin Fischer Connector. Flat at the end. Used with ANDT3016-B reference standard. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4052 | ROHMANN LOW FREQUENCY REFLECTION SPOT PROBE, 500Hz-250KHz, (23.0mm(.900" LONG x 20.0mm(.780") High) SUPPLIED WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. Reference: Airbus A318/A319/A320/A321 57-51-63-991-002-A | 1 | |
| AF-4052/4F | ROHMANN LOW FREQUENCY REFLECTION SPOT PROBE, 500Hz-250KHz, (23.0mm(.900" LONG x 20.0mm(.780") High) SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. Reference: Airbus A318/A319/A320/A321 57-51-63-991-002-A | 1 | |
| AF-4063 | LOW FREQUENCY REFLECTION PROBE, .570"Ø ID, .970"Ø OD WITH .200" RADIUS, 2-20KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4112 | LOW FREQUENCY REFLECTION SPOT PROBE .25"Ø(6.4MM) DIAMETER 2KHz-200KHz,(Olympus NDT) USED WITH NDT781 777 57-40-02 PAGE 1 FIGURE 2. IncludesTest Report and Certificate of Conformance. | 1 | |
| AF-4120 | LOW FREQUENCY RING PROBE, 10KHz-100KHz, REFLECTION, .405"ID, .800"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. USED WITH REFERENCE STANDARD: NDT1102-100 Ti | 1 | |
| AF-4124/300H | REFLECTION RING PROBE TRIAX FISHER CONNECTOR, 1.25"OD .75" ID(19.6mm) 300HZ-1KHZ. 737 PART 6 57-10-53, pg.2, USED WITH REFERENCE STANDARD NDT3168 AND NDT3176-X. Includes test report and Certificate of Conformance. | 1 | |
| AF-4125/100H | CUSTOM REFLECTION RING PROBE1.2"57-10-54 | 1 | |
| AF-4131/500H | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-1KHz, 1.35"Ø O.D.x.850"Ø I.D. WITH A TRIAX FISCHER CONNECTOR USED ON NDT3178G 737 PART 6 57-10-62, pg.2. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4144 | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .50" inches and diameter of .300" to .320" inches. 10 inches long Flat at the end. Used with ANDT3016-B reference standard. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4167 | LOW FREQUENCY REFLECTION SPOT PROBE .25"(6.4MM) DIAMETER 500Hz-50KHz,(EC/NDT) USED WITH NDT781 777 57-40-02 PAGE 1 FIGURE 2. IncludesTest Report and Certificate of Conformance. | 1 | |
| AF-4179 | LOW FREQUENCY ADJUSTABLE SLIDING PROBE, REFLECTION, 2 SINGLE MICRODOT CONNECTORS, 100Hz-20KHz (RM6). Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4183 | LOW FREQUENCY RING PROBE 100Hz-8 KHz, .850"Ø(18mm) OD x .400"Ø(7.6mm) ID x., WITH TRIAX FISCHER CONNECTOR. . Includes Test Report and Certificate of Conformance. Reference: USED WITH NDT732A, 777 Part 6 55-17-03 | 1 | |
| AF-4202 | LOW FREQUENCY REFLECTION RING PROBE, 500HZ-5KHZ, ID 0.325", OD 0.790" (MAX). 1.05" HEIGHT. TRIAX FISCHER CONNECTOR. USED WITH NDT6097 REFERENCE STANDARD Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4204G | V-SHAPED PROBE GUIDE FOR A 0.175" RADIUS CONVEX SURFACE INSPECTION. USED WITH AF-4204 SPOT PROBES | 1 | |
| AF-4237 | Detachable Surface Spot Probe, Reflection, diameter = .620"Ø in. (15.7 mm) and a operating frequency range of 100Hz -20kHz (equivalent to APG/16/S. SPO-2134), Supplied with a Triax Fischer/LEMO push/pull Connector. Includes Test Report and Certificate of | 1 | |
| AF-4240 | LOW FREQUENCY ADJUSTABLE SLIDING PROBE SUPPLIED WITH A .300" THICK SPACER, REFLECTION, 2 SINGLE MICRODOT CONNECTORS, 1KHz-20KHz(RM7). Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4241 | CUSTOM ROHMANN SURFACE PROBE, ABSOLUTE SHIELDED 90° DEGREE TIP BENT 25°, .500" DROP BENT 25°, .125"Ø, 6.55" LONG SUPPLIED WITH A MICRODOT CONNECTOR 3MHz WITH A CENTER FREQUENCY OF 500KHz, 31um Coil. IncludesTest Report and Certificate of Conformance. | 1 | |
| AF-4245 | LOW FREQUENCY ADJUSTABLE SLIDING PROBE, REFLECTION, SUPPLIED WITH 2 SINGLE MICRODOT CONNECTORS, 500Hz-10KHz. SIZE DIMENSIONS: 1.75"(44.5MM) LONG x 1.0"(25.4MM) WIDE. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4320 | VIASAT CUSTOM LOW FREQUENCY REFLECTION SPOT PROBE, 500Hz-10KHz, .500"Ø x .500" MAXIMUM HEIGHT, SUPPLIED WITH AN END MOUNTED TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4322 | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-5KHz .550" I.D. 1.0" O.D. 1.200"H TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance.....Note: Used with NDT7033 | 1 | |
| AF-4327 | CUSTOM ZETEC CONDUCTIVITY REFLECTION SPOT PROBE. 0.157 IN. (4MM) TIP. 3-100KHz WITH CENTER FREQUENCY 60KHZ. SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4335 | LOW FREQUENCY REFLECTION RING PROBE, 300Hz-1KHz .425"Ø ID SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance.....USED WITH 717-200 REFERENCE STANDARD P/N: 717RS10-C | 1 | |
| AF-5004L | HIGH FREQUENCY PENCIL PROBE, ABSOLUTE SHIELDED. LEFT HAND SIDE; NFE, 2MHZ, MICRODOT CONNECTOR. REFERENCE: AIRBUS A300-600 53-15-30. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5004R | HIGH FREQUENCY PENCIL PROBE, ABSOLUTE SHIELDED. RIGHT HAND SIDE; NFE, 2MHZ, MICRODOT CONNECTOR. REFERENCE: AIRBUS A300-600 53-15-30. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5007/10.0MSS | HIGH FREQUENCY FLEXIBLE STAINLESS STEEL ROTARY PROBE, 100KHZ-2MHZ , 10.0mmØ, 90mm WORKING LENGTH, 4-PIN FISHER CONNECTOR . Includes Test Report and Certificate of Conformance... Reference: Airbus A318.A319/A320/A321 53-31-50-PB6. | 1 | |
| AF-5007/10.4MSS | HIGH FREQUENCY FLEXIBLE STAINLESS STEEL ROTARY PROBE, 100KHZ-2MHZ , 10.4mmØ, 90mm WORKING LENGTH, 4-PIN FISHER CONNECTOR . Includes Test Report and Certificate of Conformance... Reference: Airbus A318.A319/A320/A321 53-31-50-PB6. | 1 | |
| AF-5007/10.8MSS | HIGH FREQUENCY FLEXIBLE STAINLESS STEEL ROTARY PROBE, 100KHZ-2MHZ , 10.8mmØ, 90mm WORKING LENGTH, 4-PIN FISHER CONNECTOR . Includes Test Report and Certificate of Conformance... Reference: Airbus A318.A319/A320/A321 53-31-50-PB6. | 1 | |
| AF-5007/11.0MSS | HIGH FREQUENCY FLEXIBLE STAINLESS STEEL ROTARY PROBE, 100KHZ-2MHZ , 11.0mmØ, 90mm WORKING LENGTH, 4-PIN FISHER CONNECTOR . Includes Test Report and Certificate of Conformance... Reference: Airbus A318.A319/A320/A321 53-31-50-PB6. | 1 | |
| AF-5007/6.1MSS | HIGH FREQUENCY FLEXIBLE STAINLESS STEEL ROTARY PROBE, 100KHZ-2MHZ , 6.1mmØ, 90mm WORKING LENGTH, 4-PIN FISHER CONNECTOR . Includes Test Report and Certificate of Conformance... Reference: Airbus A318.A319/A320/A321 53-31-50-PB6. | 1 | |
| AF-5007/6.25MM | HIGH FREQUENCY FLEXIBLE ROTARY PROBE 100KHz-2MHz , 6.25mmØ(.247") PLASTIC (DELRIN) TIP 90mm(3.54") WORKING LENGTH, SUPPLIED WITH A 4-PIN FISHER CONNECTOR. Includes Test Report and Certificate of conformance. Reference: Airbus A00-600 53-15-79-PB6 | 1 | |
| AF-5007/7.8MM | HIGH FREQUENCY FLEXIBLE ROTARY PROBE, 100KHZ-2MHZ , 7.8mmØ, 90mm WORKING LENGTH, 4-PIN FISHER CONNECTOR . Includes Test Report and Certificate of Conformance... Reference: Airbus A318.A319/A320/A321 53-31-50-PB6 | 1 | |
| AF-5007/7.8MSS | HIGH FREQUENCY FLEXIBLE STAINLESS STEEL ROTARY PROBE, 100KHZ-2MHZ , 7.8mmØ, 90mm WORKING LENGTH, 4-PIN FISHER CONNECTOR . Includes Test Report and Certificate of Conformance... Reference: Airbus A318.A319/A320/A321 53-31-50-PB6. | 1 | |
| AF-5007/9.0MSS | HIGH FREQUENCY FLEXIBLE STAINLESS STEEL ROTARY PROBE, 100KHZ-2MHZ , 9.0mmØ, 90mm WORKING LENGTH, 4-PIN FISHER CONNECTOR . Includes Test Report and Certificate of Conformance... Reference: Airbus A318.A319/A320/A321 53-31-50-PB6. | 1 | |
| AF-5007/9.3MSS | HIGH FREQUENCY FLEXIBLE STAINLESS STEEL ROTARY PROBE, 100KHZ-2MHZ , 9.3mmØ, 90mm WORKING LENGTH, 4-PIN FISHER CONNECTOR . Includes Test Report and Certificate of Conformance... Reference: Airbus A318.A319/A320/A321 53-31-50-PB6. | 1 | |
| AF-5007/9.4MSS | HIGH FREQUENCY FLEXIBLE STAINLESS STEEL ROTARY PROBE, 100KHZ-2MHZ , 9.4mmØ, 90mm WORKING LENGTH, 4-PIN FISHER CONNECTOR . Includes Test Report and Certificate of Conformance. Reference: Airbus A318.A319/A320/A321 53-31-50-PB6. | 1 | |
| AF-5007/9.8MSS | HIGH FREQUENCY FLEXIBLE STAINLESS STEEL ROTARY PROBE, 100KHZ-2MHZ , 9.8mmØ, 90mm WORKING LENGTH, 4-PIN FISHER CONNECTOR . Includes Test Report and Certificate of Conformance... Reference: Airbus A318.A319/A320/A321 53-31-50-PB6. | 1 | |
| AF-5008-1.120-1.240 | MANUAL ADJUSTABLE X-PROBE. 1.120"-1.240", 9.0" LONG WITH SLEEVE, TRIAX FISCHER CONNECTOR, DIFFERENTIAL 25KHz-500KHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5008-1.235-1.355 | MANUAL ADJUSTABLE X-PROBE. 1.565"-1.685", 9.0" LONG WITH SLEEVE, TRIAX FISCHER CONNECTOR, DIFFERENTIAL 25KHz-500KHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5008-1.565-1.685 | MANUAL ADJUSTABLE X-PROBE, ABSOLUTE REFLECTION, 1.565"-1.685", 9.0" LONG WITH SLEEVE, TRIAX FISCHER CONNECTOR, DIFFERENTIAL 25KHz-500KHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5011/1.120-1.240/FX | FLEXIBLE ROTARY ADJUSTABLE X-PROBE. 1.120"-1.240", 7.25" LONG, 4 PIN FISCHER CONNECTOR, REFLECTION, 25KHz-500KHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5011/1.120-1.240/FX-RA | FLEXIBLE ROTARY ADJUSTABLE X-PROBE. 1.120"-1.240", 7.25" LONG SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR, REFLECTION, 25KHz-500KHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5011/1.565-1.685/FX | FLEXIBLE ROTARY ADJUSTABLE X-PROBE. 1.565"-1.685", 7.25" LONG, 4 PIN FISCHER CONNECTOR, REFLECTION, 25KHz-500KHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5015-1.120 | ROTARY ADJUSTABLE X-PROBE. 1.120"-1.240", 6.1" WORKING LENGTH SUPPLIED WITHA 4 PIN STEP LEMO CONNECTOR, REFLECTION, 25KHz-500KHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5015-1.120/1.240 | ROTARY ADJUSTABLE X-PROBE. 1.120"-1.240", 6.1" WORKING LENGTH, 4 PIN FISCHER CONNECTOR, REFLECTION, 25KHz-500KHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5015-1.235/1.355 | ROTARY ADJUSTABLE X-PROBE. 1.235"-1.355", 6.1" WORKING LENGTH, 4 PIN FISCHER CONNECTOR, REFLECTION, 25KHz-500KHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5015-1.235/1.355-RA | ROTARY ADJUSTABLE X-PROBE. 1.235"-1.355", 6.1" WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR, REFLECTION, 25KHz-500KHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5015-1.565/1.685 | ROTARY ADJUSTABLE X-PROBE. 1.565"-1.685", 6.1" WORKING LENGTH, 4 PIN FISCHER CONNECTOR, REFLECTION, UNSHIELDED 25KHz-500KHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5019/4F | CUSTOM ROHMANN HIGH FREQUENCY PROBE,100KHz-500KHz SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. REFERENCE: AIRBUS A318/A319/A320/A321 CARGO DOOR. Includes Test Report and Certificate of Conformance | 1 | |
| AF-5019/TF | CUSTOM ROHMANN HIGH FREQUENCY PROBE,100KHz-500KHz SUPPLIED WITH A TRIAX FISCHER/LEMO PUSH/PULL CONNECTOR. REFERENCE: AIRBUS A318/A319/A320/A321 CARGO DOOR. Includes Test Report and Certificate of Conformance | 1 | |
| AF-5020 | HIGH FREQUENCY PROBE, 10-100KHz, DIFFERENTIAL, AL HOUSING, 1.00 HEIGHT .800"OD .330"ID, SUPPLIED WITH A TRIAX FISCHER. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5020-P | HIGH FREQUENCY PROBE, 10-100KHz, DIFFERENTIAL, PLASTIC HOUSING, 1.00 HEIGHT .800"OD .330"ID, SUPPLIED WITH A TRIAX FISCHER. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5021 | HIGH FREQUENCY PROBE, 10-100KHz, DIFFERENTIAL, PLASTIC HOUSING, .670 HEIGHT .793"OD .330"ID, SUPPLIED WITH A TRIAX FISCHER. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5023-1.375-1.5/5WL | HIGH FREQUENCY REFLECTION ROTARY PROBE, 5.0"WORKING LENGTH , EXPANDABLE FROM 1.375"-1.500", 25-500KHz USED WITH NDT618. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5024-P | HIGH FREQUENCY PROBE 10-100KHz, DIFFERENTIAL, PLASTIC HOUSING, 1.00HEIGHT .860"OD.390"ID, SUPPLIED WITH A MICRODOT. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5026-1.0/1.125/5WL | HIGH FREQUENCY ROTARY PROBE, REFLECTION, EXPANDABLE FROM 1.0"-1.125", 25-500KHz SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. USED WITH NDT617. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5026-1.0/1.125/5WL-RA | HIGH FREQUENCY ROTARY PROBE, REFLECTION, EXPANDABLE FROM 1.0"-1.125", 25-500KHz SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. USED WITH NDT617. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5027-.875-1.0/5WL | HIGH FREQUENCY ROTARY PROBE, REFLECTION, 25-500KHz, EXPANDABLE FROM .875" -1.0". SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. USED WITH NDT618A Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5027-.875-1.0/5WL-RA | HIGH FREQUENCY ROTARY PROBE, REFLECTION, 25-500KHz, EXPANDABLE FROM .875" -1.0". SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. USED WITH NDT618A Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5028 | CUSTOM HIGH FREQUENCY THREADED PROBE 500KHz-1MHz TRIAX FISCHER CONNECTOR. FOR 2.0-12 THREAD 15-5PH STEEL BOLT. | 1 | |
| AF-5034/.918-.964 | HIGH FREQUENCY DIFFERENTIAL ADJUSTABLE PROBE , 25KHZ, 4.325" WORKING LENGTH SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AF-5034/.964-1.034 | HIGH FREQUENCY BRIDGE DIFFERENTIAL ADJUSTABLE PROBE , 25KHZ, 4.325WL, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5035 | ROHMANN HIGH FREQUENCY ADJUSTABLE PROBE, 0° to 90°, 50KHz-3MHz, ABSOLUTE / REFLECTION, SHIELDED TRIAX FISCHER / LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5036G1 | PROBE GUIDE Material: Delrin. Diameter 0.430 ±0.025 (10.92mm ±0.064). Used in Boeing procedure 57-53-03 Part 6. Includes Certificate of Conformance. | 1 | |
| AF-5036G2 | PROBE GUIDE Material: Delrin. Diameter 0.515 ±0.025 (13.08mm ±0.064). Used in Boeing procedure 57-53-03 Part 6. Includes Certificate of Conformance. | 1 | |
| AF-5046 | HIGH FREQUENCY RING PROBE 10-100KHz, DIFFERENTIAL, .800"OD, .330"ID, 1.0" HEIGHT, 4 COILS, DELRIN HOUSING, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5062.250 | HIGH FREQUENCY ABSOLUTE PROBE 200KHZ, .250"Ø, 8"L, TRIAX CONNECTOR, (WITH THIN CENTRE SHAFT FOR USE ON LARGE Ø WHEELS) | 1 | |
| AF-5062.375 | HIGH FREQUENCY ABSOLUTE PROBE 200KHZ, .375"Ø, 8"L, TRIAX CONNECTOR, WITH THIN CENTRE SHAFT FOR USE ON LARGE Ø WHEELS) | 1 | |
| AF-5062.375/L500K | HIGH FREQUENCY ABSOLUTE PROBE 500KHZ, .375"Ø, 8"L, TRIAX CONNECTOR, WITH THIN CENTRE SHAFT FOR USE ON LARGE Ø WHEELS) | 1 | |
| AF-5063L | HOCKING HIGH FREQUENCY PROBE (LEFT) 50-500KHZ, .125"Ø TUBING,BENT 40°, RADIUS 20MM(.787"), 20° TIP, MICRODOT CONNECTOR. 8.5" LONG. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5063R | HOCKING HIGH FREQUENCY PROBE (RIGHT) 50-500KHZ, .125"Ø TUBING,BENT 40°, RADIUS 20MM(.787"), 20° TIP, MICRODOT CONNECTOR. 8.5" LONG. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5072-48/56 | HIGH FREQUENCY ADJUSTABLE MANUAL BOLT HOLE PROBE, 1-3MHz, ABSOLUTE/REFLECTION, .750"OD -.875"OD, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5072-56/64 | HIGH FREQUENCY ADJUSTABLE MANUAL BOLT HOLE PROBE, 1-3MHz, ABSOLUTE/REFLECTION, .875"OD -1.00"OD, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5072-64/72 | HIGH FREQUENCY ADJUSTABLE MANUAL BOLT HOLE PROBE, 1-3MHz, ABSOLUTE/REFLECTION, 1.00"OD -1.125"OD, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5083 | HIGH FREQUENCY PROBE, ABS SHIELDED, .093"Ø, .100" DROP, 50-500KHz, 135mm WORKING LENGTH SUPPLIED WITH A TRIAX FISCHER LEMO PUSH / PULL CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AF-5087 | CUSTOM EC-NDT SLIDING PROBE, DIFFERENTIAL SUPPLIED WITH A SIDE MOUNTED TRIAX FISCHER CONNECTOR. 50-500KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5087/4L | CUSTOM EC-NDT SLIDING PROBE, DIFFERENTIAL SUPPLIED WITH A SIDE MOUNTED 4 PIN LEMO CONNECTOR. FREQUENCY RANGE: 50-500KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5088 | CUSTOM ABSOLUTE EDDY CURRENT SLIDING PROBE, .375" RADIUS WITH .120" WIDE FIN FOR GROOVE INSPECTION, SUPPLIED WITH A TOP MOUNTED TRIAX FISCHER CONNECTOR 25-100KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5100L/2MHZ | CUSTOM EDDY CURRENT SURFACE PROBE LEFT HAND 1-3 MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5100R/2MHZ | CUSTOM EDDY CURRENT SURFACE PROBE RIGHT HAND 1-3 MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5104 | SPECIAL SPRING LOADED SURFACE PROBE, ABSOLUTE COIL 1-3MHz WITH MICRODOT CONNECTOR. PER AIRBUS SPECIFICATION A318/A319/A320/A321 57-20-40-991-002-A. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5112/7L | Detachable Pencil Probe 100-500KHz Unshielded with 7 pin Lemo connector. Tip diameter .187" with adjustable collar. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5113 | Custom Eddy Current Probe for clamp inspection grooves. Frequency 500KHz-1MHz. Triax Fischer connector, Reflection. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5115 | CUSTOM ROHMANN SURFACE PROBE ABSOLUTE STRAIGHT 75mm(2.95") LONG TRIAX FISCHER CONNECTOR 2.0mm TIP Ø DIA (.079") 10KHZ-800KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5115/4F | CUSTOM ROHMANN SURFACE PROBE ABSOLUTE STRAIGHT 75mm(2.95") LONG 4 PIN FISCHER CONNECTOR 2.0mm TIP Ø DIA (.079") 10KHZ-800KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5116/1MHZ | CUSTOM S-SHAPED FLEXIBLE SURFACE PROBE FOR LOWER SURFACE FLAP TRACK INSPECTION. 500KHz-2MHz, 7.0" LONG WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5123/4F | Custom Pivoting Eddy Current PROBE | 1 | |
| AF-5124/1MHZ | CUSTOM L-SHAPED FLEXIBLE SURFACE PROBE FOR LOWER SURFACE FLAP TRACK INSPECTION. 500KHz-2MHz, 7.0" LONG WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5125/1MHZ | CUSTOM J-SHAPED FLEXIBLE SURFACE PROBE FOR LOWER SURFACE FLAP TRACK INSPECTION. 500KHz-2MHz, 7.0" LONG WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5126 | Foerster Shielded NFe Straight Surface Probe 200KHz-6MHz, .500" (12.7mm) long, .125"Ø Tubing. 63mm overall length. MICRODOT CONNECTOR Use 500K Shield. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5126/L00 | Foerster Shielded NFe Straight Surface Probe 200KHz-6MHz, .500" (12.7mm) long, .125"Ø Tubing. 63mm overall length. LEMO 00 CONNECTOR Use 500K Shield. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5127-.750/.875 | HIGH FREQUENCY ADJUSTABLE MANUAL BOLT HOLE PROBE, 1-3MHz, ABSOLUTE/REFLECTION, .750"OD -.875"OD, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5127-.875/1.0 | HIGH FREQUENCY ADJUSTABLE MANUAL BOLT HOLE PROBE, 1-3MHz, ABSOLUTE/REFLECTION, .875"OD -1.00"OD, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5132 | CUSTOM FLEXIBLE SURFACE PROBE 5.O" LONG, 1.6" DROP, 1.3" LONG TOTHE RIGHT SIDE OF THE 1.6" DROP AND .200" FINAL DROP FROM THE 1.3" LEAD LENGTH. 1-3MHz, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5134L/2MHZ | SURFACE PROBE 90° DEGREES, .030" DROP .125" Ø TUBING, LEFT HAND, 15.50" LONG, 1.378" RADIUS WITH MICRODOT CONNECTOR 1-3MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5134R/2MHZ | SURFACE PROBE 90° DEGREES, .030" DROP .125" Ø TUBING, RIGHT HAND, 15.50" LONG, 1.378" RADIUS WITH MICRODOT CONNECTOR 1-3MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5135L/2MHZ | SURFACE PROBE 90° DEGREES, .030" DROP .125" Ø TUBING, LEFT HAND, 10.0" LONG, 1.535" RADIUS WITH MICRODOT CONNECTOR 1-3MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5135R/2MHZ | SURFACE PROBE 90° DEGREES, .030" DROP .125" Ø TUBING, RIGHT HAND, 10.0" LONG, 1.535" RADIUS WITH MICRODOT CONNECTOR 1-3MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5137 | Pencil Probe with Acrylic Adjustable Collar 100KHz-500KHz, ABS/Bridge Shielded Supplied with Triax Fischer Connector. Includes Test Report and Certifcate of Conformance. | 1 | |
| AF-5138 | CUSTOM THREADED BOLT PROBE FOR A286 STEEL BLOT 5/16-24 THREAD. FREQUENCY 500KHz-1MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5139 | CUSTOM ROTATING SCANNER PROBE 118-135 DEGREE DRILLED COUNTERSINK (.256"Ø)100KHZ-2MHZ. 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of conformance. | 1 | |
| AF-5140 | Custom Eddy Current Encirling Probe, .890"Ø ID, 500KHz-1MHz Differential, Triax Fischer Connector. Inspecting ASTM A513 Type 5 Steel Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5141/TF | CUSTOM EDDY CURRENT PENCIL PROBE(DELRIN - BLACK ACETAL), STRAIGHT SHAFT WITH THE COIL CENTERED AT THE TIP .250"Ø, 50-500KHz UNSHIELDED WITH TRIAX FISCHER CONNECTOR, 3.0: LONG. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5145 | Custom Rotary Probe for Radiused Hole Inspection100KHz-2MHz., .250"Ø 4 Pin Fischer Connector with 2.0: working Length. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5145/4F | ABSOLUTE SMALL SURFACE CRACK PROBE. 10KHZ-100KHZ. 76.5 x 12 mm (HxW). 4-PIN FISCHER CONNECTOR. PLASTIC PENCIL HOUSING. Includes test report. | 1 | |
| AF-5149/4F | CUSTOM ROHMANN SURFACE PROBE ABSOLUTE STRAIGHT 75mm(2.95") LONG 4 PIN FISCHER CONNECTOR 9.5MM Ø DIA (.374") 500KHZ-3MHZ PLASTIC HOUSING. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5150 | CUSTOM BOLT PROBE FOR A286 STEEL, HEAD-TO-SHANK "FILLET" INSPECTION. FREQUENCY 500KHz-1MHz. | 1 | |
| AF-5151 | CUSTOM BLADE PROBE, ABSOLUTE .030 THICK, UNSHIELDED, 6" LONG, STRAIGHT, 50-500KHZ, TRIAX FISCHER CONNECTOR. | 1 | |
| AF-5157-2.5 | CUSTOM WHEEL BEAD SEAT PROBE WITH A .125" RADIUS, UNSHIELDED 50-500KHz WITH A MICRODOT CONNECTOR, 2.50" INCHES LONG. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5157-3 | CUSTOM WHEEL BEAD SEAT PROBE WITH A .125" RADIUS, UNSHIELDED 50-500KHz WITH A MICRODOT CONNECTOR, 3.0" INCHES LONG. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5159 | CUSTOM STRAIGHT SHAFT SURFACE PROBE WITH DELRIN TIP 50-500KHz WITH MICRODOT CONNECTOR, 6.0" LONG. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5165 | CUSTOM DUAL COIL EDDY CURRENT PROBE FOR GROOVE INSPECTION, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. REFERENCE: SLS-CRES-60D-GRV. | 1 | |
| AF-5173 | Custom Eddy Current Encirling Probe, 10mm (.3937"Ø) ID, 200KHz-2MHz Differential Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5173/2.25mm | Custom eddy current encircling probe for 2.25mm tube (outer diameter), inner diameter of coil housing 2.5mm, 50kHz – 500kHz, bridge differential, triax connector, include test report and certificate of conformance. | 1 | |
| AF-5173/4MM | Custom Eddy Current Encirling Probe, 4mm tube (outer diameter), 50KHz-500kHz, bridge differential, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5173/7.5mm | Custom eddy current encircling probe for 7.25mm tube (outer diameter), inner diameter of coil housing 7.5mm, 50kHz – 500kHz, bridge differential, triax connector, include test report and certificate of conformance. | 1 | |
| AF-5212/7L | Detachable Pencil Probe 100-500KHz Shielded with 7 pin Lemo connector. Tip diameter .187" with adjustable collar. | 1 | |
| AF-5213/7L | Detachable Pencil Probe 500KHz-3MHz Unshielded Reflection, with 7 pin Lemo connector. Tip diameter .187" with adjustable collar. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5214/7L | Detachable Pencil Probe 500KHz-1MHz Absolute Shielded, with 7 pin Lemo connector. Tip diameter .187" with adjustable collar. IncludesTest Report and Certificate of conformance. | 1 | |
| AF-5215 | CUSTOM EDDY CURRENT EDGE HOLE PROBE, SPLIT END, 200KHz-500KHz, .213"Ø WITH A TRIAX FISCHER CONNECTOR, 4.0" WORKING LENGTH. | 1 | |
| AF-5221 | CUSTOM HIGH FREQUENCY EDDY CURRENT PROBE FOR EDGE DEFECT DETECTION FOR THE KC10 ARB SUPPORT FITTING. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5222 | FLEXIBLE ROTARY FLAT BOTTOM PROBE SPLIT END, EXPANDABLE FROM .187"-.205" WITH ADJUSTABLE COLLAR GUIDE BLOCK. 5.0" LONG STEEL 4 PIN FISCHER CONNECTOR 100KHz-2MHz. Includes Test Report and Certificate of Conformance | 1 | |
| AF-5222-1 | FLEXIBLE ROTARY FLAT BOTTOM PROBE SPLIT END, EXPANDABLE FROM .187"-.200" WITH ADJUSTABLE COLLAR GUIDE BLOCK. 5.0" LONG STEEL 4 PIN STEP LEMO CONNECTOR 100KHz-2MHz. Includes Test Report and Certificate of Conformance | 1 | |
| AF-5226 | CUSTOM MICRO INDEXING EDDY CURRENT SURFACE PROBE ASSEMBLY WITH 3 PROBE TIPS: 100KHz-300KHz, 500KHz, 1-3MHz. INCLUDES Includes Test Report and Certificate of Conformance. Reference: MD-11 Section 2-2 figure 2.7 PG.5. | 1 | |
| AF-5227 | CUSTOM BOBBIN PROBE, 100-500KHz, DIFFERENTIAL, .425"Ø 1.6" LONG WITH A 4 PIN FISCHER CONNECTOR. Used to inspect brass tubing I.D.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5227-1 | CUSTOM BOBBIN PROBE, 100-500KHz, DIFFERENTIAL, .425"Ø 1.6" LONG WITH A 1 METER LONG HARDWIRED CABLE ATTACHED TO A TRIAX FISCHER CONNECTOR. Used to inspect brass tubing I.D.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5233 | CUSTOM FLEXIBLE BLADE PROBE 90° DEGREES, .045" THICK 6.0" LONG SUPPLIED WITH A MICRODOT CONNECTOR, 50-500KHZ Includes Test Report and Certificate of Conformance. REFERENCE: Canadair 215/215T ATA 53-10, 57-30 Service Bulletin 215-A558 | 1 | |
| AF-5239 | Custom Eddy Current Pencil Probe with Plexiglass Collar, Absolute Bridge, Shielded, 1-2MHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance. | 1 | |
| AF-5252 | Custom Flexible Surface Probe, 90°, .125"Ø, Frequency 1-3MHz, .250" Drop, 1.0" long handle machined to .425"Ø. Probe total length of 11.0" supplied with a microdot connector. Includess Test Report and Certificate of Conformance. | 1 | |
| AF-5254 | Custom Nortec / Pratt & Whittney Eddy Current Probe, 2MHz, Dual "D'" Coil, .2.50mm, 5.6 UH Matching Inductance, Spring Loaded Tip, Differential / Bridge, Match phase angle and frequency as close as possible. Supplied with a Triax Fischer connector. | 1 | |
| AF-5257G | PROBE GUIDE Material: Lucite. Diameter 1.50" ±0.02 . Used in Boeing procedure 55-10-27 Part 6. Includes Test Report and Certificate of Conformance | 1 | |
| AF-5271 | CUSTOM FLEX SHAFT PROBE, 9.8mmØ(.386") 500KHz, 12.20"(310mm) LONG SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. Reference: Airbus A300-600 Part 6 57-10-35 page 606 Figure 604 | 1 | |
| AF-5272 | CUSTOM COUNTERBORE ROTARY ADJUSTABLE X STYLE PROBE WITH THE COIL LOCATED AT THE EDGE OF THE PROBE TIP, .936'-1.0" 2.0"WL, SUPPLIED WITH A 4 PIN FICHER CONNECTOR, 100 KHz-2MHz Includes Test Report and Certificate of Conformance REFERENCE STANDARD - NDT3117 | 1 | |
| AF-5278/TF | HIGH FREQUENCY SURFACE PROBE, Twin Coil Differential 50-500KHZ. 4.0" Long 0.375" Diameter with Triax Fischer connector. For use with Boeing Reference Standard 497 767 Part 6 53-00-04. IncludesTest Report and Certificate of conformance. | 1 | |
| AF-5283 | Custom Eddy Current Pencil Probe for SB 215-A476, .093"Ø Stainless Steel Shaft, Absolute Shielded, 3.0" Long Handle, 30° Crank Which Extends 3.0" from the Handle, 1.0" Drop, Frequency 100KHz-1MHz with an Operating Frequency of 100KHz, Supplied with a Mic | 1 | |
| AF-5292 | ABSOLUTE SHIELDED STRAIGHT PENCIL PROBE, .25"Ø (6.35mm)Ø with a Tip diameter of .180"Ø attached to a 6 foot cable with adjustable collar. Nortec 8 pin Burndy connector 2-4MHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5293 | ABSOLUTE UNSHIELDED STRAIGHT PENCIL PROBE, .25"Ø (6.35mm)Ø with a Tip diameter of .180"Ø attached to a 6 foot cable with adjustable collar. Nortec 8 pin Burndy connector 500KHz-1MHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5295/.437 | RECHII SCANNER PROBE 200KHz-500KHz SPLIT END,.437"-.500", SUPPLIED WITH A 4 PIN STEP LEMO USED WITH RA SCANNER, 2.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5295/.500 | RECHII SCANNER PROBE 200KHz-500KHz SPLIT END,.500"-.562", SUPPLIED WITH A 4 PIN STEP LEMO USED WITH RA SCANNER, 2.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5296 | CUSTOM BLADE PROBE, STRAIGHT, WITH A .045" THICK TIP WITH A 45° JOGGLE AT THE HANDLE, 4.0" LONG, 100-500KHz, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| AF-5322/1M | ABSOLUTE PENCIL PROBE .100" TIP OD ..10° TIP ,3.0" LONG DELRIN BODY UNSHEILDED 50KHZ-1.5MHZ MICRODOT CONNECTOR. USE ON TI/SS. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5331 | CUSTOM HIGH FREQUENCY THREAD PROBE, 1-3MHz, 1MM THREAD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR, MATERIAL INSPECTED 718 INCONEL. Includes Test Report and Certificate of Conformance | 1 | |
| AF-5440-1 | Adjustable Rotating Scanner Probe, Adjustable from .125"-.156", 100KHz-2MHz 1.5" Working Length Supplied with a 4 Pin Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5440-2 | Adjustable Rotating Scanner Probe, Adjustable from .156"-.187", 100KHz-2MHz 1.5" Working Length Supplied with a 4 Pin Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5444 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Absolute Bridge Unshielded, 100KHz-500KHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance...P/100KHZ-500KHZ/AU | 1 | |
| AF-5444-C/072 | Custom Plexiglass Collar For .072"Ø, tip Pencil Probes. Through Hole Tolerance = +0.005"/-0.000"... Includes Certificate of conformance. | 1 | |
| AF-5444-C/093 | Custom Plexiglass Collar For .093"Ø, tip Pencil Probes. Through Hole Tolerance = +0.005"/-0.000"... Includes Certificate of conformance. | 1 | |
| AF-5444-C/125 | Custom Plexiglass Collar For .125"Ø, tip Pencil Probes. Through Hole Tolerance = +0.005"/-0.000"... Includes Certificate of conformance. | 1 | |
| AF-5445 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Absolute Bridge Unshielded, 500KHz-1MHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance...P/500KHZ-1MHZ/AU | 1 | |
| AF-5446 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Differential Shielded, 4-6Mhz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance...P/100KHZ-500KHZ/AU | 1 | |
| AF-5447/4.7MSS | HIGH FREQUENCY FLEXIBLE STAINLESS STEEL ROTARY PROBE, 100KHz-2MHz , 6.2mmØ(.185"), 120mm(4.724") WORKING LENGTH SUPPLIED WITH A 4-PIN FISHER CONNECTOR . Includes Test Report and Certificate of Conformance... Reference: Airbus Figure 57-21-18-991-014-A... | 1 | |
| AF-5447/6.2MSS | HIGH FREQUENCY FLEXIBLE STAINLESS STEEL ROTARY PROBE, 100KHz-2MHz , 6.2mmØ(.244"), 120mm(4.724") WORKING LENGTH SUPPLIED WITH A 4-PIN FISHER CONNECTOR . Includes Test Report and Certificate of Conformance... Reference: Airbus Figure 57-21-18-991-014-A... | 1 | |
| AF-5447/7.8MSS | HIGH FREQUENCY FLEXIBLE STAINLESS STEEL ROTARY PROBE, 100KHz-2MHz , 7.8mmØ(.307"), 120mm(4.724") WORKING LENGTH SUPPLIED WITH A 4-PIN FISHER CONNECTOR . Includes Test Report and Certificate of Conformance... Reference: Airbus Figure 57-21-18-991-014-A... | 1 | |
| AF-5448 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Differential Shielded, 50KHz-100KHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance. P/50KHZ-100KHZ/AU | 1 | |
| AF-5451 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Reflection Unshielded, 100KHz-1MHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance.....PR/100KHZ-1MHZ/AU | 1 | |
| AF-5452 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Reflection Unshielded, 1MHz-3MHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance.....PR/1MHZ-3MHZ/AU | 1 | |
| AF-5454 | Boeing Custom Flexible Shaft Eddy Current Detachable surface Probe, Bent, Differential, 50-KHz-500KHz, Probe Body .200" Wide, .125" Radius with a Slight Rear Drop for Edge Support Positioning. 3.0" Working Length Supplied with a Triax Fischer / Lemo ... | 1 | |
| AF-5456 | Custom Boeing 727 Eddy Current Manual Bolt Hole Probe, 13KHz, .625"Ø, 2.0" Working Length Supplied with a 1.25" Max Collar Length. Supplied with a Triax Fischer whch has an Internal Balance Coil. Includes Test Report and Certificate of Conformance........ | 1 | |
| AF-5457 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Absolute Shielded, 100KHz-500KHz, Supplied with a Microdot Connector. Includes Test Report and Certificate of conformance. | 1 | |
| AF-5461 | CUSTOM DUAL COIL SURFACE PROBE, STRAIGHT, UNSHIEDED DIFFERENTIAL, 50-500KHz, 3.0" LONG SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-6001-A | ADJUSTABLE SLIDING PROBE, REFLECTION, 1KHZ-100KHZ, WITH 2 SINGLE MICRODOT | 1 | |
| AF-6005/150HZ | ADJUSTABLE SLIDING PROBE, REFLECTION, 50HZ-8KHZ, WITH 2 SINGLE MICRODOT CONNECTORS. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-6006 | SLIDING PROBE, REFLECTION, 1-40KHZ TRIAX FISHER CONNECTOR. REFERENCE STANDARD USED ( NDT1099) 757 PT. 6, 53-30-14. Includes Certification Report and COC. | 1 | |
| AF-6009 | ADJUSTABLE SLIDING PROBE, REFLECTION, 100HZ-20KHZ, WITH 2 SINGLE MICRODOT CONNECTORS. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-6010 | SLIDING PROBE 1-5KHZ, REFLECTION TRIAX FISCHER CONNECTOR USED WITH NDT3088 AND NDT3118 | 1 | |
| AF-6018 | ADJUSTABLE SLIDING PROBE, REFLECTION, 100HZ-500KHZ, WITH 2 SINGLE MICRODOT. Includes Test Report and Cerfificate of Conformance. | 1 | |
| AF-6019 | ADJUSTABLE SLIDING PROBE, REFLECTION, 100HZ-500HZ, WITH 2 SINGLE MICRODOT CONNECTORS. SIZE: 3.50"L x 1.312"W x 1.250"H. Includes Test Report and Cerfificate of Conformance. | 1 | |
| AF-6020 | ADJUSTABLE SLIDING PROBE, REFLECTION, 1KHZ-20KHZ, WITH 2 SINGLE MICRODOT CONNECTORS. .5" DIA. .100" spacers and .050" spacers. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-6020 SPACER SET | SET OF SPACERS AND SCREWS FOR USE WITH AF-6020 PROBE. TWO EACH OF 0.010, 0.025, 0.050, 0.100 WIDTH SPACERS AND 6 SCREWS. | 1 | |
| AF-6021 | ABOSLUTE SLIDING PROBE WITH SEPARATE DRIVER/RECEIVER COILS, REFLECTION. ALUMINUM HOUSING. 200HZ-100KHz. 4-Pin FISCHER CONNECTOR. Includes Test Report and Certificate of Conformation. | 1 | |
| AF-6022/4F | CUSTOM SLIDING PROBE, REFLECTION WITH A 4 PIN FISCHER CONNECTOR 50Hz-50KHz .905" WIDE x 1.18" HIGH x 1.77" LONG, INCLUDES PLEXIGLASS GUIDE. | 1 | |
| AF-6037 | ADJUSTABLE SLIDING PROBE, REFLECTION, 500HZ-10KHZ, WITH 2 SINGLE MICRODOT CONNECTORS. 1.0" Width. .100" spacers and .050" spacers. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-6038 | ADJUSTABLE SLIDING PROBE, REFLECTION, 5KHZ-100KHZ, WITH 2 SINGLE MICRODOT CONNECTORS. .750" Width. .100" spacers and .050" spacers. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-MBB403-7-1 | CUSTOM STAINLESS STEEL EDDY CURRENT ROTARY PROBE INCLUDING COLLAR, FREQUENCY 100KHz-2MHz WITH 4 PIN FISCHER CONNECTOR. REFERENCE: AIRBUS A300-600 FIGURE 603 PART 6 53-19-27 PAGE 604 PROCEDURE A. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-SPO-6450/5719 | CUSTOM NORTEC SPO-6450 STYLE MANUAL BOLT HOLE PROBE 500KHz-2MHz with SPO-5719 STYLE HOLDING FIXTURE W/ 1/16" PER rEVOLUTION THREAD. | 1 | |
| AFK-1017 | Custom Eddy Current Inspection Kit. Includes the following probes, Reference Standard and cables.AUR-.125SE/1.75WL-LF, AUR-.156SE/1.75WL-LF, AUR-.187SE/1.75WL-LF, AUR-.250SE/2.0WL-LF, AUR-.312SE/2.0WL-LF, AUR-.375SE/2.0WL-LF, AUR-.437SE/2.0WL-LF, AUR-... | 1 | |
| AFK-5300SE-7 | CUSTOM EDDY CURRENT FLEXIBLE SPRING SHAFT ROTARY PROBE KIT. .125"Ø to .500"Ø. INCLUDES THE FOLLOWING 7 PROBE PART NUMBERS. AF-5300-.125SE/1T-6L, AF-5300-.156SE/1T-6L, AF-5300-.187SE/1T-6L, AF-5300-.250SE/1T-6L, AF-5300-.312SE/1T-6L, AF-5300-.375SE/1T-6L, | 1 | |
| AFK-ARR.156-.500SE | RECHII ROTARY BOLT- HOLE PROBE KIT, 8 SPLIT END ROTARY PROBES SUPPLIED WITH A RECHII CONNECTOR(4 PIN STEP LEMO) FOR USE WITH THE OLYMPUS RA SCANNER. INCLUDES THE FOLLOWING BOLT-HOLE SIZE RANGES: .156"-.187", .187"-.218", .218"-.250", .250"-.281", .281"-.3 | 1 | |
| AFK-ARRY11 | Custom Rotary “Y” Probe for RA Scanner. Kit includes 11 probes in a waterproof storage case. One each of the following items: (ARRY-.156-.187), (ARRY-.187-.218), (ARRY-.218-.250), (ARRY-.250-.312), (ARRY-.312-.375), (ARRY-.375-.437), (ARRY-.437-.500), (AR | 1 | |
| AFK-ARRY13 | Custom Rotary “Y” Probe for RA Scanner. Kit includes 13 probes. One each of the following items: (ARRY-.125-.156), (ARRY-.156-.187), (ARRY-.187-.218), (ARRY-.218-.250), (ARRY-.250-.281), (ARRY-.281-.312), (ARRY-.312-.375), (ARRY-.375-.437), (ARRY-.437-.50 | 1 | |
| AFK-ARRY21 | Y Style Rotating scanner probe with 4 Pin Step Lemo(Rechii) Connector. Probe Kit for use with Mini scanners. Reflection D Coils. Contains 1 each of the following in a shipping / storage container, 21 Probes Total: ARRY-.125-.156/1.75WL, ARRY-.156-.187/1 | 1 | |
| AFK-RP09 | Custom Eddy Current Low Frequency Ring Probe Kit to include the following part numbers. ARP-1.40-.85-200H, ARP-1.35-.85-500H, ARP-1.25-.77-300H, ARP-1.0-.5-200H, ARP-.80/.40/200H, AF-4022, AF-4035,AF-4068, AF-4081, . Supplied with a waterproof kit box. I | 1 | |
| AFK-SLD4 | Custom Sliding Probe kit. Includes the following part numbers. AF-6012, AF-6004, AF-4031/TF, AF-4039 Supplied with a form fitted Waterproof Kit Box. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3560A | Corrosion Reference Standard used for verifying function of low frequency corrosion probes. It is 0.100” thick with simulated 5%, 10% and 20% material loss. Overall size: 7.50” x 3.50” (190 x 89 mm). Material: 2024-T3 Aluminum. Includes Certification. | 1 | |
| AFNDT-3560B | Corrosion Reference Standard used for verifying function of low frequency corrosion probes. It is 0.100” thick with simulated 5%, 10% and 20% material loss. Overall size: 7.50” x 3.50” (190 x 89 mm). Material: 7075-T6 Aluminum. Includes Certification. | 1 | |
| ALL12-L07-007-CON | ACCESSORY, LEAD, 12-WAY LEMO TO 7-WAY LEMO, 0.7M, CONDUCTIVITY (TO FIT AEROCHECK PLUS CONDUCTIVITY PROBE) | 1 | |
| AMH-12.5ML00SE/76MWL | ADJUSTABLE MANUAL BOLT HOLE PROBE WITH COLLAR, 200KHz, .472"(12.0mm)-.551"(14.0mm)OD, 76mm WORKING LENGTH, SUPPLIED WITH A 00 LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AMH-19.0ML00SE/76MWL | ADJUSTABLE MANUAL BOLT HOLE PROBE WITH COLLAR, 200KHz, .748"(19.0mm)-.807"(20.5mm)OD, 76mm WORKING LENGTH, SUPPLIED WITH A 00 LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AMH-22ML00SE/76MWL | ADJUSTABLE MANUAL BOLT HOLE PROBE WITH COLLAR, 200KHz, .866"(22.0mm)-.925"(23.5mm)OD, 76mm WORKING LENGTH, SUPPLIED WITH A 00 LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AMH-23.5ML00/76MWL | ADJUSTABLE MANUAL BOLT HOLE PROBE WITH COLLAR, 200KHz, .925"(23.5mm)-.984"(25.0mm)OD, 76mm WORKING LENGTH, SUPPLIED WITH A 00 LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AMH-4.5ML00SE/76MWL | ADJUSTABLE MANUAL BOLT HOLE PROBE WITH COLLAR, 200KHz, .177"(4.5mm)-.216"(5.5mm)OD, 76mm WORKING LENGTH, SUPPLIED WITH A 00 LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AMH-6.0ML00SE/76MWL | ADJUSTABLE MANUAL BOLT HOLE PROBE WITH COLLAR, 200KHz, .236"(6.0mm)-.275"(7.0mm)OD, 76mm WORKING LENGTH, SUPPLIED WITH A 00 LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AMH-6.4M/2MHZ | ADJUSTABLE MANUAL BOLT HOLE PROBE WITH COLLAR, 1-3MHz, .252"(6.4mm)OD, 2.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AMH-7.5ML00SE/76MWL | ADJUSTABLE MANUAL BOLT HOLE PROBE WITH COLLAR, 200KHz, .295"(7.5mm)-.354"(9.0mm)OD, 76mm WORKING LENGTH, SUPPLIED WITH A 00 LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AMH-9.5ML00/76MWL | ADJUSTABLE MANUAL BOLT HOLE PROBE WITH COLLAR, 200KHz, .374"(9.5mm)-.433"(11.0mm)OD, 76mm WORKING LENGTH, SUPPLIED WITH A 00 LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AMH.156SE | ADJUSTABLE MANUAL BOLT HOLE PROBE WITH COLLAR, 50-500KHz, .156"-.187"OD, 1.1" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AMH.187/6FX | FLEXIBLE ADJUSTABLE MANUAL BOLT HOLE PROBE WITH COLLAR, 50-500KHz, .187"-.250"OD, 6.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AMH.187SE | ADJUSTABLE MANUAL BOLT HOLE PROBE WITH COLLAR, 50-500KHz, .187"-.250"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AMH.250SE | ADJUSTABLE MANUAL BOLT HOLE PROBE WITH COLLAR, 50-500KHz, .250"-.281"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AMH4.5-5.5MM/200KHZ | ADJUSTABLE MANUAL BOLT HOLE PROBE WITH COLLAR, 200KHz, .177"(4.5mm)-.216"(5.5mm)OD, 2.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF.750 | MANUAL BOLT HOLE PROBE FERRITE SHIELDED 50-500KHz, .750(3/4")"Ø x 4.0" OVERALL LENGTH WITH ADJUSTABLE COLLAR. SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF.891 | MANUAL BOLT HOLE PROBE FERRITE SHIELDED 50-500KHz, .891(57/64")"Ø x 4.0" OVERALL LENGTH WITH ADJUSTABLE COLLAR. SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHX-.156-.187 | ADJUSTABLE X MANUAL BOLT-HOLE PROBE. EXPANDABLE FROM: .156"-.187" 3.0" OVERALL LENGTH SUPPLIED WITH A MICRODOT CONNECTOR, 50-500KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHX-.187-.250 | ADJUSTABLE X MANUAL BOLT-HOLE PROBE 3" OVERALL LENGTH, WITH MICRODOT CONNECTOR, 50-500KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHX-.250-.312 | ADJUSTABLE "X" MANUAL BOLT-HOLE PROBE WITH COLLAR .250".312". 3.0" OVERALL LENGTH, ,MICRODOT CONNECTOR, 50-500KHZ. Includes Test Report and Certificate of Conformance | 1 | |
| AMHX-.312-.375 | ADJUSTABLE "X" MANUAL BOLT-HOLE PROBE WITH COLLAR .312".375". 3.0" OVERALL LENGTH, ,MICRODOT CONNECTOR, 50-500KHZ. Includes Test Report and Certificate of Conformance | 1 | |
| AMHX-.437-.500 | ADJUSTABLE "X" MANUAL BOLT-HOLE PROBE WITH COLLAR .437".500". 3.0" OVERALL LENGTH, ,MICRODOT CONNECTOR, 50-500KHZ. Includes Test Report and Certificate of Conformance | 1 | |
| AMHX-.500-.625 | ADJUSTABLE "X" MANUAL BOLT-HOLE PROBE WITH COLLAR .500".625". 3.0" OVERALL LENGTH, ,MICRODOT CONNECTOR, 50-500KHZ. Includes Test Report and Certificate of Conformance | 1 | |
| AMHX-.625-.750 | ADJUSTABLE "X" MANUAL BOLT-HOLE PROBE WITH COLLAR .625".750". 3.0" OVERALL LENGTH, ,MICRODOT CONNECTOR, 50-500KHZ. Includes Test Report and Certificate of Conformance | 1 | |
| AMHX-.875-1.00 | ADJUSTABLE "X" MANUAL BOLT-HOLE PROBE WITH COLLAR .875"-1.00" WITH A 3.0" OVERALL LENGTH SUPPLIED WITH A MICRODOT CONNECTOR, 50-500KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHX-1.0-1.125 | ADJUSTABLE "X" MANUAL BOLT-HOLE PROBE WITH COLLAR 1.0"-1.125". 3.0" OVERALL LENGTH, ,MICRODOT CONNECTOR, 50-500KHZ. Includes Test Report and Certificate of Conformance | 1 | |
| AMHX-1.125-1.250 | ADJUSTABLE "X" MANUAL BOLT-HOLE PROBE WITH COLLAR 1.125"-1.250". 3.0" OVERALL LENGTH, ,MICRODOT CONNECTOR, 50-500KHZ. Includes Test Report and Certificate of Conformance | 1 | |
| AMHX-1.250-1.375 | ADJUSTABLE "X" MANUAL BOLT-HOLE PROBE WITH COLLAR 1.250"-1.375". 3.0" OVERALL LENGTH, ,MICRODOT CONNECTOR, 50-500KHZ. Includes Test Report and Certificate of Conformance | 1 | |
| AMHX-10M-12M | ADJUSTABLE "X" MANUAL BOLT-HOLE PROBE WITH COLLAR .393"-.472(10mm-12mm). 3.0" OVERALL LENGTH, ,MICRODOT CONNECTOR, 50-500KHZ. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.156-.187 | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 50-500KHz, .156"-.187"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.156-.187/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .156"-.187"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.187-.218/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .187"-.218"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.218-.250/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .218"-.250"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.250-.281/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .250"-.281"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.250-.312/500K | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 500KHz-1MHz, .250"-.312"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.281-.312/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .281"-.312"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.312-.343/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .312"-.343"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.312-.375/500K | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 500KHz-1MHz, .312"-.375"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.343-.375/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .343"-.375"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.375-.437 | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 50-500KHz, .375"-.437"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.375-.437/500K | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 500KHz-1MHz, .375"-.437"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.406-.437/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .406"-.437"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.437-.468/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .437"-.468"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.437-.500/500K | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 500KHz-1MHz, .437"-.500"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.468-.500/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .468"-.500"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.500-.531/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .500"-.531"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.500-.625/500K | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 500KHz-1MHz, .500"-.625"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.531-562/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .531"-.562"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.562-591/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .562"-.591"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.591-.625/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .591"-.625"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.625-.656/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .625"-.656"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.656-.687/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .656"-.687"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.687-.718/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .687"-.718"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.718-.750/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .718"-.750"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY-.750-.781/3WL | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 300KHz-1MHz, .750"-.781"OD. 3.0" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY.125-.156 | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 50-500KHz, .125"-.156"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY.125-.156/2MHZ | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 1-3MHz, .125"-.156"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY.125-.156/500K | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 500KHz-1MHz, .125"-.156"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY.156-.187 | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 50-500KHz, .156"-.187"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY.156-.187/2MHZ | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 1-3MHz, .156"-.187"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY.156-.187/500K | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 500KHz-1MHz, .156"-.187"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY.187-.250/2MHZ | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 1-3MHz, .187"-.250"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY.187-.250/500K | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 500KHz-1MHz, .187"-.250"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY.250-.312/2MHZ | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 1-3MHz, .250"-.312"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY.312-.375/2MHZ | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 1-3MHz, .312"-.375"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY.375-.437/2MHZ | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 1-3MHz, .375"-.437"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AMHY.500-.625 | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 50-500KHz, .500"-.625"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| ARP- 1.0/.50/200H | LOW FREQUENCY REFLECTION RING PROBE .500"Ø ID X 1.0"Ø OD 200HZ-3KHZ WITH A TRIAX FISCHER CONNECTOR. 737 PART 6 57-10-60, PG.2 USED WITH NDT3157. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| ARP-.53-.90 | CUSTOM RING PROBE REFLECTION TRIAX FISHER CONNECTOR,...900"Ø OD x .530"Ø ID .900" TALL, 50Hz-5KHz. Includes Test Report and Certificate of Conformance. 737 PART 6 57-10-62, pg.2.. | 1 | |
| ARP-.80/.40/200H | LOW FREQUENCY RING PROBE REFLECTION .400" ID .800"OD TRIAX FISCHER CONNECTOR 100HZ-10KHZ . REFERENCE: 737 PART 6 57-10-60, pg.2. USED WITH (NDT3156, 57, 59, 61, 62, 63, 64). Includes test report and Certificate of Conformance. | 1 | |
| ARP-1.0/.50/200H | LOW FREQUENCY REFLECTION RING PROBE .500"Ø ID x 1.0"Ø OD 200Hz-3KHz WITH A TRIAX FISCHER CONNECTOR. 737 PART 6 57-10-60, pg.2 USED WITH NDT3157. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0/100H-6 | CUSTOM LOW FREQUENCY RING PROBE 100Hz-5KHz REFLECTION WITH TRIAX FISHER CONNECTOR737 PART 6 57-10-55, pg.2 USED WITH NDT3152-X SERIES. Includes test report and Certificate of Conformance... | 1 | |
| ARP-1.2/100H-7 | LOW FREQUENCY REFLECTION RING PROBE 1.2" OD, .605" ID, 50Hz-3KHz TRIAX FISHER CONNECTOR. 737 PART 6 57-10-58, pg.2. and 737 PART 6 57-10-54, pg.2 USED WITH NDT3153-X AND 3167-X SERIES REFERENCE STANDARDS. Includes Test Report and Certificate of ... | 1 | |
| ARP-1.25-.75-300H | REFLECTION RING PROBE TRIAX FISHER CONNECTOR, 1.25"OD .75" ID(19.6mm) 300HZ-1KHZ. 737 PART 6 57-10-53, pg.2, USED WITH REFERENCE STANDARD NDT3168 AND NDT3176-X. Includes test report and Certificate of Conformance... | 1 | |
| ARP-1.35-.85-500H | LOW FREQUENCY RING PROBE, REFLECTION 100Hz-1KHz, 1.35" O.D.x.850"I.D. TRIAX FISCHER CONNECTOR USED ON NDT3178G 737 PART 6 57-10-62, pg.2. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-31.8M/19.6M-100H | CUSTOM RING PROBE REFLECTION TRIAX FISHER CONNECTOR,1.25"OD(31.8mm) .77" ID(19.6mm) 100HZ-1.5KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-34.3M/21.6M-100H | CUSTOM RING PROBE REFLECTION TRIAX FISHER CONNECTOR,1.35"OD(34.3mm) .77" ID(22.4mm) 100HZ-1.5KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR | ROTATING PLASTIC PROBE 4.7 MM - 5.5 MM (0.187 IN. - 0.218 IN.)(OLYMPUS) | 1 | |
| ARR-.125 | OLYMPUS NDT / NDT ENGINEERING CORP. ROTARY PROBE FOR RA2000 SCANNER 100KHz-2MHz 4 PIN STEP LEMO, 1/8"(.125") OD, 1.1" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.156SE/1.5WL | RECHII BOLT HOLE PROBE 100KHz-2MHz,. SPLIT END .156"-.187"Ø 1.5" WORKING LENGTH 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER. Includes Test Report and Certificate of Conformance. SPO-3564 | 1 | |
| ARR-.187SE/1.1WL | RECHII BOLT HOLE PROBE 500KHz-3MHz, SPLIT END 187"-.218"Ø , 1.1" WORKING LENGTH 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER.Includes Test Report and Certificate of Conformance. SPO-3564 | 1 | |
| ARR-.187SE/1.5WL | RECHII BOLT HOLE PROBE 200KHz-3MHz, SPLIT END 187"-.218"Ø , 1.5" WORKING LENGTH 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER.Includes Test Report and Certificate of Conformance. SPO-3564 | 1 | |
| ARR-.218SE/1.1WL | RECHII BOLT HOLE PROBE 500KHz-3MHz, SPLIT END 218"-.250"Ø , 1.1" WORKING LENGTH 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER. Includes Test Report and Certificate of Confromance. SPO-3564 | 1 | |
| ARR-.218SE/1.5WL | RECHII BOLT HOLE PROBE 200KHz-3MHz, SPLIT END 218"-.250"Ø , 1.5" WORKING LENGTH 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER.Includes Test Report and Certificate of Conformance. SPO-3564 | 1 | |
| ARR-.250SE/1.1WL | RECHII BOLT HOLE PROBE 200KHz-3MHz, SPLIT END 250"-.281"Ø , 1.1" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER. Includes Test Report and Certificate of Conformance. SPO-3564 | 1 | |
| ARR-.250SE/1.5WL | RECHII BOLT HOLE PROBE 500KHz-3MHz, SPLIT END .218"-.250"Ø , 1.5" WORKING LENGTH 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER.Includes Test Report and Certificate of Conformance. SPO-3564 | 1 | |
| ARR-.281SE/1.5WL | RECHII BOLT HOLE PROBE 500KHz-3MHz, SPLIT END 281"-.312"Ø, 1.5" WORKING LENGTH 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER. Includes Test Report and Certificate of Conformance. SPO-3564 | 1 | |
| ARR-.305/52WL | RECHII ROTARY PROBE FOR RA2000/ MINI MITE SCANNER USED WITH THE NORTEC 600. 100KHz-2MHz. 4 PIN STEP LEMO. 305"Ø OD, 52.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.312SE/1.5WL | RECHII BOLT HOLE PROBE 500KHz-3MHz,. SPLIT END .312"-.375"Ø 1.5" WORKING LENGTH 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER. Includes Test Report and Certificate of Conformance. SPO-3564 | 1 | |
| ARR-.312SE/2WL | RECHII BOLT HOLE PROBE 200KHz-3MHz, SPLIT END .312"-.375"Ø , 2.0" WORKING LENGTH 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER.Includes Test Report and Certificate of Conformance. SPO-3564 | 1 | |
| ARR-.375SE/1.5WL | RECHII BOLT HOLE PROBE 500KHz-3MHz,. SPLIT END .375"-.437"Ø, 1.5"WORKING LENGTH 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER. Includes Test Report and Certificate of Confromance.. SPO-3564 | 1 | |
| ARR-.375SE/2.0WL | RECHII SCANNER PROBE 100KHz-2MHz 4 PIN STEP LEMO USED WITH RA SCANNER 3.0" OVERALL LENGTH SPLIT END .375"-.437", 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance | 1 | |
| ARR-.375SE/2WL | RECHII BOLT HOLE PROBE 200KHz-3MHz, SPLIT END .375"-.437"Ø , 2.0" WORKING LENGTH 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER.Includes Test Report and Certificate of Conformance. SPO-3564 | 1 | |
| ARR-.406SS/1.5WL | STAINLESS STEEL ROTATING SCANNER PROBE,.406"Ø, 100KHZ-2MHZ SHIELDED, 1.5" WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. USED WITH THE OLYMPUS RECHII RA SCANNER. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.437/8L | RECHII BOLT HOLE PROBE, 100KHz-2MHz., EXPANDABLE FROM .437"-.500", SPLIT END USED WITH RA SCANNER, 8.0" OVERALL LENGTH WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.437SE/1.5WL | RECHII BOLT HOLE PROBE 500KHZ-3MHZ, SPLIT END 437-.500", 1.5"WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER. Includes Test Report and Certificate of Conformance. SPO-3564 | 1 | |
| ARR-.437SE/2WL | RECHII SCANNER PROBE 200KHz-3MHz 4 PIN STEP LEMO USED WITH RA SCANNER 3.0" OVERALL LENGTH SPLIT END .437"-.500", 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance | 1 | |
| ARR-.500SE/1.5WL | RECHII BOLT HOLE PROBE 500KHz-3MHz, SPLIT END, 1.5" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER, 500"-.562". Includes Test Report and Certificate of Conformance. SPO-3564 | 1 | |
| ARR-.500SE/2.0WL | RECHII SCANNER PROBE 100KHz-2MHz 4 PIN STEP LEMO USED WITH RA SCANNER 3.0" OVERALL LENGTH SPLIT END .500"-.562", 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.500SE/2WL | RECHII SCANNER PROBE 200KHz-3MHz 4 PIN STEP LEMO USED WITH RA SCANNER 2.0" OVERALL LENGTH SPLIT END .500"-.625", 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.625SE/1.5WL | RECHII BOLT HOLE PROBE 200KHz-1MHz, SPLIT END, 1.5" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER, 625"-.687". Includes Test Report and Certificate of Conformance. SPO-3564 | 1 | |
| ARR-.625SE/2WL | RECHII SCANNER PROBE 200KHz-3MHz 4 PIN STEP LEMO USED WITH RA SCANNER 2.0" OVERALL LENGTH SPLIT END .625"-.750", 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance.ER THIS P/N | 1 | |
| ARR-.687SE/1.5WL | RECHII BOLT HOLE PROBE 500KHz-3MHz, SPLITEND.687"-.750",1.5"WORKING..LENGTH, 4 PIN STEP LEMO CONNECTOR. USED WITH RA SCANNER. Includes Test Report and Certificate of Conformance. SPO-3564 | 1 | |
| ARR-.750SE/2WL | RECHII SCANNER PROBE 200KHz-3MHz 4 PIN STEP LEMO USED WITH RA SCANNER 2.0" OVERALL LENGTH SPLIT END .750"-.875", 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.875SE/2WL | RECHII SCANNER PROBE 200KHz-3MHz 4 PIN STEP LEMO USED WITH RA SCANNER 2.0" OVERALL LENGTH SPLIT END .875"- 1.0", 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.125SS | RECHII STAINLESS STEEL ROTATING SCANNER PROBE, .125"Ø USED WITH RA 2000 SCANNER. 1.1" WOIRKING LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.156SS | RECHII STAINLESS STEEL ROTATING SCANNER PROBE, .156"Ø USED WITH RA 2000 SCANNER. 1.1" WOIRKING LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.218SS | RECHII STAINLESS STEEL ROTATING SCANNER PROBE, .218"Ø USED WITH RA 2000 SCANNER. 1.1" WOIRKING LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. of Conformance | 1 | |
| ARR.250SS | RECHII STAINLESS STEEL ROTATING SCANNER PROBE, .250"Ø USED WITH RA 2000 SCANNER. 1.1" WOIRKING LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.312 | RECHII STAINLESS STEEL ROTATING SCANNER PROBE, .312"Ø USED WITH RA 2000 SCANNER. 3.0" OVERALL LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.375SS | RECHII STAINLESS STEEL ROTATING SCANNER PROBE, .312"Ø USED WITH RA 2000 SCANNER. 3.0" OVERALL LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.437SS/3WL | RECHII STAINLESS STEEL ROTATING SCANNER PROBE, .437"Ø USED WITH RA 2000 SCANNER. 3.0" OVERALL LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.500SS | RECHII STAINLESS STEEL ROTATING SCANNER PROBE, .500"Ø USED WITH RA 2000 SCANNER. 3.0" OVERALL LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-.375SS/1.5WL | FLAT BOTTOM STAINLESS STEEL ROTARY PROBE WITH A 30° COIL ANGLE, .375"Ø USED WITH RA 2000 SCANNER. 1.5" WOIRKING LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-.437SS/1.5WL | FLAT BOTTOM STAINLESS STEEL ROTARY PROBE WITH A 30° COIL ANGLE, .437"Ø USED WITH RA 2000 SCANNER. 1.5" WOIRKING LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-.500SS/1.5WL | FLAT BOTTOM STAINLESS STEEL ROTARY PROBE WITH A 30° COIL ANGLE, .500"Ø USED WITH RA 2000 SCANNER. 1.5" WOIRKING LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARRX-.187-.250 | RECHII ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, .187"-.250"OD, 2.0" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRX-.250-.312 | RECHII ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, .250"-.312"OD, 2.0" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRX-.312-.375 | RECHII ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, .312"-.375"OD, 2.0" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRX-.500-.625 | RECHII ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, .500"-.625"OD, 2.0" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRX-.625-.750 | RECHII ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, .625"-.750"OD, 2.0" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRX-.750-.875/3WL | RECHII ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, .750"-.875"OD, 3.0" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRX-.770/4.5WL | RECHII ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, .770"OD, 4.5" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRX-.850/4.5WL | RECHII ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, .850"OD, 4.5" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRX-.936-1.0 | RECHII ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, .936"-1.00"OD, 2.0" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRX-1.10/4.5WL | RECHII ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, 1.10"OD, 4.5" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRX-1.125-1.250/3WL | RECHII ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, 1.125"-1.250"OD, 3.0" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRX-1.125-1.500/3WL | RECHII ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, 1.125"-1.500"OD, 3.0" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRX-2.20-2.325 | RECHII ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, 2.20"-2.325"OD, 2.0" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRX-2.31/2.435 | RECHII ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, 2.310"-2.435"OD, 2.0" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRX-2.56-2.685 | RECHII ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, 2.560"-2.685"OD, 2.0" WORKING LENGTH, 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRY-5.5-7M/50MWL | ADJUSTABLE "Y" ROTATING SCANNER PROBE 100KHz-2MHz SUPPLIED 4 PIN STEP LEMO CONNECTOR 50mm WORKING LENGTH. EXPANDABLE FROM 5.5-7.0mmØ. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRY-7-8.5M/50MWL | ADJUSTABLE "Y" ROTATING SCANNER PROBE 100KHz-2MHz SUPPLIED 4 PIN STEP LEMO CONNECTOR 50mm WORKING LENGTH. EXPANDABLE FROM 7.0-8.5mmØ. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRY-8.5-10M/50MWL | ADJUSTABLE "Y" ROTATING SCANNER PROBE 100KHz-2MHz SUPPLIED 4 PIN STEP LEMO CONNECTOR 50mm WORKING LENGTH. EXPANDABLE FROM 8.5-10.0mmØ. Includes Test Report and Certificate of Conformance. | 1 | |
| ARTPX-008 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.375in (10mm); Tube ID: 0.375-0.437in (9.53-11.1mm); Coil: 1000= 100-2000 kHz; Poly ... | 1 | |
| ARTPX-029 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.750in (19mm); Tube ID: 0.750-0.875in (19.05-22.23mm); Coil: 1000= 100-2000 kHz; Pol... | 1 | |
| ARTPX-030 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.875in (22mm); Tube ID: 0.875-1.000in (22.23-25.4mm); Coil: 1000= 100-2000 kHz; Poly... | 1 | |
| AS101 | SPECIAL NONFERROUS PENCIL PROBE FOR HALEC ALTERNATIV | 1 | |
| ASDP-.620 | SURFACE PROBE STANDARD BRIDGE .620" DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 300Hz-10KHz. Includes Test Report and Certificate of conformance. Olympus P/N: 9213011 | 1 | |
| ASLD-100H-10K | Adjustable Sliding Probe, 100HZ-10KHZ, Dual Microdot | 1 | |
| ASLD-100H-50K | Adjustable Sliding Probe, 100HZ-50KHZ, Dual Microdot | 2 | |
| ASLD-100H-A | Adjustable Sliding Probe, 100HZ-20KHZ, Dual Microdot, with Thumbscrew Adjustment | 1 | |
| ASLD-50H | Adjustable Sliding Probe, 50HZ-10KHZ, Dual Microdot, with manual spacers | 1 | |
| ASLD-50H-A | Adjustable Sliding Probe, 50HZ-10KHZ, Dual Microdot, with Thumbscrew Adjustment | 1 | |
| ASLD2.3-400H-1 | Adjustable Sliding Probe, 100Hz-40KHZ, Dual microdots | 1 | |
| AT120D | TIP ADAPTOR FOR 6-MM DIA PROBE UNIT (OLYVPUS) | 1 | |
| ATBL09-1.2R-6 | BLADE PROBE 50-500KHz, .090" THICK, 1.2 RADIUS, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATPN-95-6 | EDDY CURRENT PROBE OLYMPUS P/100KHZ-500KHZ/A/905/6 | 1 | |
| AUR-.156SE | Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe..0.156 in. (3.97 mm) diameter, Self Expanding 1.75 in. (44.4 mm) working length.Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflectiondifferential coil configuration. In... | 1 | |
| AUR-.187SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.187 INCH (4.75MM) DIAMETER, 1.1 INCH (2.79CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| AUR-.250SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.250 INCH (6.35MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| AUR-.312SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.312 INCH (7.92MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| AUR-.375SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.375 INCH (9.53MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| AUR-.500SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.500 INCH (12.7MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| AURCS100-.187/4WL | UNIVERSAL ROTARY 100 DEGREE COUNTERSINK HOLE PROBE WITH PLASTIC HOUSING. 0.187 INCH (4.76MM) DIAMETER PILOT | 1 | |
| AURFBFX-.375SS/100MWL | STAINLESS STEEL FLEXIBLE ROTARY FLAT BOTTOM PROBE 100mm WORKING LENGTH, 9.525mmØ(.375") HEAD .750" LONG TIP, 4 PIN FISCHER CONNECTOR 100KHZ-2MHZ ( TAPERED END OF THE PROBE WITH 30° COIL ANGLE) per Airbus NTM 51-10-18. Includes Test Report and Certificate | 1 | |
| AURFBFX-.500SS/100MWL | STAINLESS STEEL FLEXIBLE ROTARY FLAT BOTTOM PROBE 100mm WORKING LENGTH, 12.7mmØ(.500") HEAD .750" LONG TIP, 4 PIN FISCHER CONNECTOR 100KHZ-2MHZ ( TAPERED END OF THE PROBE WITH 30° COIL ANGLE) per Airbus NTM 51-10-18. Includes Test Report and Certificate | 1 | |
| AURFX-.218SE/.5T/4WL | ADJUSTABLE FLEX SHAFT ROTARY PROBE, SPLIT END, .218"-.250", 0.500" LONG TIP, 4.0" WORKING LENGTH ( NO SLEEVE). 4 PIN FISCHER CONNECTOR 100KHz-2MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFX-.562SE/6WL | UNIVERSAL FLEXIBLE ROTARY PROBE 100KHZ-2MHZ ,4-PIN FISCHER CONNECTOR, INCLUDES SLEEVE. 6.0" WORKING LENGTH. .750" TIP LENGTH SPLIT END, EXPANDABLE FROM .562"-.625"Ø. Compatible with Olympus Minimite Part Number 9020266. Includes Test Report and Certif... | 1 | |
| AURFX-.625SE/6WL | UNIVERSAL FLEXIBLE ROTARY PROBE 100KHZ-2MHZ ,4-PIN FISCHER CONNECTOR, INCLUDES SLEEVE. 6.0" WORKING LENGTH. .750" TIP LENGTH SPLIT END, EXPANDABLE FROM .625"-.687"Ø. Compatible with Olympus Minimite Part Number 9020266. Includes Test Report and Certif... | 1 | |
| AURFX-.687SE/6WL | UNIVERSAL FLEXIBLE ROTARY PROBE 100KHZ-2MHZ ,4-PIN FISCHER CONNECTOR, INCLUDES SLEEVE. 6.0" WORKING LENGTH. .750" TIP LENGTH SPLIT END, EXPANDABLE FROM .687"-.750"Ø. Compatible with Olympus Minimite Part Number 9020266. Includes Test Report and Certif... | 1 | |
| AURFX-.750SE/6WL | UNIVERSAL FLEXIBLE ROTARY PROBE 100KHZ-2MHZ ,4-PIN FISCHER CONNECTOR, INCLUDES SLEEVE. 6.0" WORKING LENGTH. .750" TIP LENGTH SPLIT END, EXPANDABLE FROM .750"-.812"Ø. Compatible with Olympus Minimite Part Number 9020266. Includes Test Report and Certif... | 1 | |
| AURX-.187-.250 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .187"-.250"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.250-.312 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .250"-.312"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.312-.375 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .312"-.375"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.375-.437 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .375"-.437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.375-.437/5WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .375"-.437"OD, 5.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.437-.500 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .437"-.500"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.437-.500/4WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .437"-.500"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.500-.625 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .500"-.625"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.500-.625/4WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .500"-.625"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.625-.687 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .625"-.687"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.625-.750 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .625"-.750"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.625-.750/4WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .625"-.750"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.687-.750 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .687"-.750"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.725-.875 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .725"-.875"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.750-.875 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .750"-.875"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.750-.875/4WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .750"-.875"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.770/4.5WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .770"OD, 4.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.811-.875 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .811"-.875"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.850/4.5WL | ADJUSTABLE ROTARY X-PROBE, 50-200KHz, SPILT END, .850"OD, 4.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.875-.937 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .875"-.937"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-.875-1.0 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .875"-1.000"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-1.0-1.060 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .1.000"-1.060"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-1.0-1.125/2WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .1.000"-1.125"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-1.00-1.250 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .1.000"-1.250"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-1.10/4.5WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 1.10"OD, 4.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-1.125-1.250/2WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 1.125"-1.250"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-1.186-1.217 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 1.187"-1.217"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-1.250-1.375/2WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 1.250"-1.375"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-1.310-1.435/2.0WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 1.310"-1.435"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-1.375-1.500/2WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 1.375"-1.500"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-1.436-1.467 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 1.436"-1.467"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-1.460-1.560 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 1.460"-1.560"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-1.567/5WL/2MHZ | ADJUSTABLE ROTARY X-PROBE, 1-3MHz, SPILT END, 1.5670"OD, 5.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-1.725-1.825 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 1.725"-1.825"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-1.750-1.875/2.0WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 1.725"-1.825"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-1.875-2.000/500K | ADJUSTABLE ROTARY X-PROBE, 100KHz-1MHz, SPILT END, 1.875"-2.000"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-10-12MM/80MWL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .394"(10.0mm)-.472"(12.0mm)OD, 80mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-11-13MM/80MWL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .433"(11.0mm)-.512"(13.0mm)OD, 80mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-15-17MM/80MWL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .590"(15.0mm)-.669"(17.0mm)OD, 80mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-2.000-2.125/500K | ADJUSTABLE ROTARY X-PROBE, 100KHz-1MHz, SPILT END, 2.000"-2.125"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-2.20-2.325 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 2.000"-2.325"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-2.31-2.435 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 2.310"-2.435"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-2.56-2.685 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 2.560"-2.685"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-2.625-2.750/500K | ADJUSTABLE ROTARY X-PROBE, 100KHz-1MHz, SPILT END, 2.625"-2.750"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-2.750-2.875/500K | ADJUSTABLE ROTARY X-PROBE, 100KHz-1MHz, SPILT END, 2.750"-2.875"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-3.07-3.19/3.5WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 3.070"-3.190"OD, 3.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-3.17-3.29/2WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 3.170"-3.290"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-3.375-3.500/500K | ADJUSTABLE ROTARY X-PROBE, 100KHz-1MHz, SPILT END, 3.375"-3.500"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-3.500-3.625/500K | ADJUSTABLE ROTARY X-PROBE, 100KHz-1MHz, SPILT END, 3.500"-3.625"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-3.625-3.750/500K | ADJUSTABLE ROTARY X-PROBE, 100KHz-1MHz, SPILT END, 3.625"-3.750"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-3.750-3.875/500K | ADJUSTABLE ROTARY X-PROBE, 100KHz-1MHz, SPILT END, 3.750"-3.875"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-4.750-4.875/500K | ADJUSTABLE ROTARY X-PROBE, 100KHz-1MHz, SPILT END, 4.750"-4.875"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-4.875-5.000/500K | ADJUSTABLE ROTARY X-PROBE, 100KHz-1MHz, SPILT END, 4.875"-5.000"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-5-7MM/80MWL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .197"(5.0)mm-.275"(7.0mm)OD, 80mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-5.0-6.0M/30MWL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .197"(5.0)mm-.236"(6.0mm)OD, 30mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-6-8MM/80MWL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .236"(6.0)mm-.315"(8.0mm)OD, 80mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-7-9MM/80MWL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .275"(7.0)mm-.354"(9.0mm)OD, 80mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-8-10MM/80MWL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .315"(8.0)mm-.394"(10.0mm)OD, 80mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-9-11MM/80MWL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .354"(9.0)mm-.433"(11.0mm)OD, 80mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-_187-_250 | ADJUSTABLE ROTARY X-PROBE, 100KHZ-2MHZ, SPILT END, .187"-.250"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AURX-_750-_875/4WL | ADJUSTABLE ROTARY X-PROBE, 100KHZ-2MHZ, SPILT END, .750"-.875"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AURX.187-.250/12"WL | ADJUSTABLE ROTARY X-PROBE, 1-2MHz, SPILT END, .187"-.250"OD, 12.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX.250-.312/12"WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .250"-.312"OD, 12.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX1.000-1.125 | ADJUSTABLE ROTARY X-PROBE, 1-2MHz, SPILT END, 1.000"-1.125"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX1.125-1.250 | ADJUSTABLE ROTARY X-PROBE, 1-2MHz, SPILT END, 1.125"-1.250"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX1.250-1.375 | ADJUSTABLE ROTARY X-PROBE, 1-2MHz, SPILT END, 1.250"-1.375"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX1.360-1.420/3WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 1.360"-1.420"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX1.375-1.500 | ADJUSTABLE ROTARY X-PROBE, 1-2MHz, SPILT END, 1.375"-1.500"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX1.800-1.860/3WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 1.800"-1.860"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX1.920-1.980/3WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 1.920"-1.980"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX10-12MM | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .394"(10.0mm)-.472"(12.0mm)OD, 2.75" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX10-14MM | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .394"(10.0mm)-.552"(14.0mm)OD, 2.75" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX2.00-2.125 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 2.000"-2.125"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX2.000-2.060/3WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 2.000"-2.060"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX2.150-2.250 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 2.150"-2.250"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX2.215-2.275/3WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 2.215"-2.275"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX2.328-2.388/4WL | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 2.328"-2.388"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX2.375-2.500 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, 2.375"-2.500"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURXF-.312-.375 | ADJUSTABLE ROTARY X-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .312"-.375"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURXFX-.500/6L | FLEXIBLE ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .500"-.625"OD, 6.0" OVERALL LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.125-.156 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .125"-.156"OD, 1.3" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.125-.156/1.5WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .125"-.156"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.125-.156/1.75WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .125"-.156"OD, 1.75" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.125-.156/3.0WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .125"-.156"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.125-.156/3.5OAL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .125"-.156"OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.125-.156SS/2.0WL | STAINLESS STEEL UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .125"-.156"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.156-.187 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .156"-.187"OD, 1.3" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.156-.187/1.5WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .156"-.187"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.156-.187/1.75WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .156"-.187"OD, 1.75" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.156-.187/2M | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 1-3MHz, SPILT END, .156"-.187"OD, 1.3" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.156-.187/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .156"-.187"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.156-.187/3.5OAL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .156"-.187"OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.156-.187/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .156"-.187"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.156-.187/4WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .156"-.187"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.156-.187SS/2.0WL | STAINLESS STEEL UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .156"-.187"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.171-.218 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .171"-.218"OD, 1.3" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.187-.218 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .187"-.218"OD, 1.3" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.187-.218/1.5WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .187"-.218"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.187-.218/1.75WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .187"-.218"OD, 1.75" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.187-.218/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .187"-.218"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.187-.218/3.5OAL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .187"-.218"OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.187-.218/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .187"-.218"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.187-.218/6WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .187"-.218"OD, 6.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.187-.250 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .187"-.250"OD, 1.3" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.187-.250/1.5WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .187"-.250"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.187-.250/2M | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 1-3MHz, SPILT END, .187"-.250"OD, 1.3" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.187-.250/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .187"-.250"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.187-.250/3.5OAL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .187"-.250"OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.187-.250SS/2.0WL | STAINLESS STEEL UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .187"-.250"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.215-.250/1.5WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .215"-.250"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.218-.250 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .218"-.250"OD, 1.3" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.218-.250/1.5WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .218"-.250"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.218-.250/2.0WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .218"-.250"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.218-.250/3.5OAL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .218"-.250"OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.218-.250/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .218"-.250"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.247-.312/1.5WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .247"-.312"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.250-.281 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .250"-.281"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.250-.312 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .250"-.312"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.250-.312/1.5WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .250"-.312"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.250-.312/2M | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 1-3MHz, SPILT END, .250"-.312"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.250-.312/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .250"-.312"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.250-.312/3.5OAL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .250"-.312"OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.250-.312/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .250"-.312"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.250-.312SS/2.0WL | STAINLESS STEEL UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .250"-.312"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.250-.312SS/2WL | STAINLESS STEEL UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .250"-.312"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. **Ask for more Sizes and Pricing** | 1 | |
| AURY-.281-.312 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .281"-.312"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.281-.375 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .281"-.375"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.312-.343 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .312"-.343"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.312-.375 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .312"-.375"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.312-.375/1.5WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .312"-.375"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.312-.375/12.0WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .312"-.375"OD, 12.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.312-.375/2M | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 1-3MHz, SPILT END, .312"-.375"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.312-.375/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .312"-.375"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.312-.375/3.5OAL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .312"-.375"OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.312-.375/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .312"-.375"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.312-.375/4WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .312"-.375"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.312-.375SS/2.0WL | STAINLESS STEEL UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .312"-.375"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.340-.400/12.0WL-C | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .340"-.400"OD, 12.0" WORKING LENGTH WITH A GUIDE COLLAR ON THE SHAFT, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.343-.375 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .343"-.375"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.375-.437 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .375"-.437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.375-.437/1.5WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .375"-.437"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.375-.437/2MHZ | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 1-3MHz, SPILT END, .375"-.437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.375-.437/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .375"-.437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.375-.437/3.5OAL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .375"-.437"OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.375-.437/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .375"-.437"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.375-.437/4WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .375"-.437"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.375-.437SS/2.0WL | STAINLESS STEEL UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .375"-.437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.406-.437 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .406"-.437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.437-.500 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .437"-.500"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.437-.500/1.5WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .437"-.500"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.437-.500/2M | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 1-3MHz, SPILT END, .437"-.500"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.437-.500/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .437"-.500"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.437-.500/3.5OAL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .437"-.500"OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.437-.500/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .437"-.500"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.437-.500/4WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .437"-.500"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.437-.500SS/2.0WL | STAINLESS STEEL UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .437"-.500"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.468-.500 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .468"-.500"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.500-.562 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .500"-.562"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.500-.562/4WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .500"-.562"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.500-.562/6WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .500"-.562"OD, 6.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.500-.562SS/2.0WL | STAINLESS STEEL UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .500"-.562"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.500-.563/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .500"-.563"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.500-.625 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .500"-.625"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.500-.625/2M | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 1-3MHz, SPILT END, .500"-.625"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.500-.625/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .500"-.625"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.500-.625/3.5OAL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .500"-.625"OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.500-.625/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .500"-.625"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.500-.625/4WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .500"-.625"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.530-.590/12.0WL-C | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .530"-.590"OD, 12.0" WORKING LENGTH WITH A GUIDE COLLAR ON THE SHAFT, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.531-.562 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .531"-.562"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.562-.625 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .562"-.625"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.562-.625/6WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .562"-.625"OD, 6.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.562-.625SS/2.0WL | STAINLESS STEEL UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .562"-.625"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.563-.626/2M | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 1-3MHz, SPILT END, .562"-.626"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.563-.626/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .562"-.626"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.593-.625 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .593"-.625"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.625-.687 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .625"-.687"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.625-.687/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .625"-.687"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.625-.687/4WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .625"-.687"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.625-.687/6WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .625"-.687"OD, 6.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.625-.687SS/2.0WL | STAINLESS STEEL UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .625"-.687"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.625-.750 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .625"-.750"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.625-.750/2M | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 1-3MHz, SPILT END, .625"-.750"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.625-.750/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .625"-.750"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.625-.750/4WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .625"-.750"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.626-.689/2M | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 1-3MHz, SPILT END, .626"-.689"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.626-.689/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .626"-.689"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.656-.687 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .656"-.687"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.687-.750 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .687"-.750"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.687-.750/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .687"-.750"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.687-.750/4WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .687"-.750"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.687-.750/6WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .687"-.750"OD, 6.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.687-.750SS/2.0WL | STAINLESS STEEL UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .687"-.750"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.689-.752/2M | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 1-3MHz, SPILT END, .689"-.752"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.689-.752/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .689"-.752"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.718-.750 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .718"-.750"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.725-.850/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .725"-.850"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.750-.812 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .750"-.812"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.750-.812SS/2.0WL | STAINLESS STEEL UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .750"-.812"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.750-.875 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .750"-.875"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.750-.875/2M | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 1-3MHz, SPILT END, .750"-.875"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.750-.875/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .750"-.875"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.750-.875/4WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .750"-.875"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.750-.875/6WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .750"-.875"OD, 6.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.752-.815/2M | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 1-3MHz, SPILT END, .752"-.815"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.752-.815/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .752"-.815"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.796-.890/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .796"-.890"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.812-.875 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .812"-.875"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.812-.875SS/2.0WL | STAINLESS STEEL UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .812"-.875"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.815-.878/2M | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 1-3MHz, SPILT END, .815"-.878"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.815-.878/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .815"-.878"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.875-.937 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .875"-.937"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.875-.937/6WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .875"-.937"OD, 6.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.875-.938 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .875"-.938"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.875-.984/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .875"-.984"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.875-1.0 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .875"-1.0"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.875-1.0/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .875"-1.0"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.875-1.0/4WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .875"-1.0"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.878-.941/2M | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 1-3MHz, SPILT END, .878"-.941"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.878-.941/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .878"-.984"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.890-.984/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .890"-.984"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.890-1.0/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .890"-1.00"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.937-1.0 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .937"-1.00"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.937-1.0/6WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .937"-1.00"OD, 6.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.938-1.0 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .938"-1.00"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.953-1.04/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .953"-1.04"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-1.0-1.125/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 1.00"-1.125"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-1.0-1.125/4WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 1.00"-1.125"OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-1.00-1.063 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 1.00"-1.063"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-1.00-1.125 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 1.00"-1.125"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-1.125-1.250 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 1.125"-1.250"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-1.125-1.250/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 1.125"-1.250"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-1.250-1.375 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 1.250"-1.375"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-1.250-1.375/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 1.250"-1.375"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-1.375-1.500/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 1.375"-1.500"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-1.50-1.625 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 1.500"-1.625"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-1.500-1.625/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 1.500"-1.625"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-1.625-1.750/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 1.625"-1.750"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-1.750-1.875/3WL | UNIVERSAL ROTARY "Y" PROBE, WITH ADJUSTABLE SLEEVE,100KHz-2MHz SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 3.0" WORKING LENGTH. EXPANDABLE FROM: 1.750"Ø-1.875"Ø. Includes Test Report and Certificate of Conformance | 1 | |
| AURY-1.875-2.00/3WL | UNIVERSAL ROTARY "Y" PROBE, WITH ADJUSTABLE SLEEVE,100KHz-2MHz SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 3.0" WORKING LENGTH. EXPANDABLE FROM: 1.875"Ø-2.00"Ø. Includes Test Report and Certificate of Conformance | 1 | |
| AURY-10-12.5MM/70MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .394"(10.0mm)-.492"(12.5mm)OD, 70mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-10-12M/51MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .394"(10.0mm)-.472"(12.0mm)OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-10-12MM/70MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .394"(10.0mm)-.472"(12.0mm)OD, 70mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-11-13M/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .433"(11.0mm)-.512"(13.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-11-13MM/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .433"(11.0mm)-.512"(13.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-12-15M/51MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .472"(12.0mm)-.590"(15.0mm)OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-12-15MM/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .472"(12.0mm)-.590"(15.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-13-15MM//51MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .512"(13.0mm)-.590"(15.0mm)OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-13-16M/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .512"(13.0mm)-.630"(16.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-15-17MM/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .590"(15.0mm)-.669"(17.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-15-18M/51MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .669"(15.0mm)-.708"(18.0mm)OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-15-20MM/110MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .669"(15.0mm)-.787"(20.0mm)OD, 110mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-15M-20M | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .669"(15.0mm)-.787"(20.0mm)OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-16-19M/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .630"(16.0mm)-.748"(19.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-17-19MM/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .669"(17.0mm)-.748"(19.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-18-21M/51MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .708"(18.0mm)-.748"(19.0mm)OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-19-22M/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .748"(19.0mm)-.866"(22.0mm)OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-2.25-2.375/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 2.250"-2.375"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-2.5-2.625/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 2.500"-2.625"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-2.750-2.812/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 2.750"-2.812"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-2.812-2.862/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 2.812"-2.862"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-20-25MM/110MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .787"(20.0mm)-.984"(25.0mm)OD, 110mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-20M-22M/4WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .787"(20.0mm)-.866"(22.0mm)OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-20M-25M | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .787"(20.0mm)-.984"(25.0mm)OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-22-25M/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .866"(22.0mm)-.984"(25.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-22M-25M/4WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .866"(22.0mm)-.984"(25.0mm)OD, 4.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-25-30MM/110MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .984"(25.0mm)-1.181"(30.0mm)OD, 110mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-27-29MM/51MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 1.063"(27.0mm)-1.142"(29.0mm)OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-3-4M/38WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .118"(3.0mm)-.157"(4.0mm)OD, 38mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-3.0-4.0M/51MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .118"(3.0mm)-.157"(4.0mm)OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-3.0-5.0MM/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .118"(3.0mm)-.197"(5.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-3.9-4.5M/45MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .154"(3.9mm)-.177"(4.2mm)OD, 45mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-31-32M/200MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 1.220"(31.0mm)-1.260"(32.0mm)OD, 200mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-31-33MM/51MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 1.220"(31.0mm)-1.299"(33.0mm)OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-4-5M/38MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .157"(4.0mm)-.197"(5.0mm)OD, 38mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-4.0-4.5MM/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .157"(4.0mm)-.177"(4.5mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-4.0-4.8M/45MWL | Adjustable "y" rotating scanner probe | 1 | |
| AURY-4.0-5.0M/51MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .157"(4.0mm)-.197"(5.0mm)OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-4.0-5.0MM/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .157"(4.0mm)-.197"(5.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-4.5-5.0/60MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .177"(4.5mm)-.197"(5.0mm)OD, 60mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-4.5-5.0MM/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .177"(4.5mm)-.197"(5.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-4.6-6.3M/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .181"(4.6mm)-.248"(6.3mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-4.8-5.5M/45MWL | Adjustable Y Rotating Scanner Probe | 1 | |
| AURY-5-6.5M/38MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .197"(5.0mm)-.256"(6.5mm)OD, 38mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-5-6M/30MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .197"(5.0mm)-.236"(6.0mm)OD, 30mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-5-6M/35MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .197"(5.0mm)-.236"(6.0mm)OD, 35mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-5-6MM/30MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .197"(5.0mm)-.236"(6.0mm)OD, 30mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-5.0-6.0MM/60MWL | ADJUSTABLE ROTATING SCANNER PROBE 100KHz-2MHz, EXPANDABLE FROM 5.0-6.0mmØ, 60mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-5.0-6.5M/51MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .197"(5.0mm)-.256"(6.5mm)OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-5.0-7.0MM/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .197"(5.0mm)-.276"(7.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-5.5-7M/50MWL | ADJUSTABLE "Y" ROTATING SCANNER PROBE 100KHz-2MHz SUPPLIED 4 PIN FISCHER CONNECTOR 50mm WORKING LENGTH. EXPANDABLE FROM 5.5-7.0mmØ. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-5.5M/45MWL | ADJUSTABLE ROTATING SCANNER YPROBE | 1 | |
| AURY-6-7M | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .236"(6.0mm)-.275"(7.0mm)OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-6-7MM/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .236"(6.0mm)-.275"(7.0mm)OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-6-7MM/45MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .236"(6.0mm)-.275"(7.0mm)OD, 45mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-6-8M/51MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .236"(6.0mm)-.279"(8.0mm)OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-6.0-6.5/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .236"(6.0mm)-.256"(6.5mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-6.0-7.0M/45MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .236"(6.0mm)-.275"(7.0mm)OD, 45mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-6.0-7.0MM/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .236"(6.0mm)-.275"(7.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-6.0-7.0MM/60MWL | ADJUSTABLE ROTATING SCANNER PROBE 100KHz-2MHz, EXPANDABLE FROM 6.0-7.0mmØ, 60mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-6.0-8.0M/51MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .236"(6.0mm)-.315"(8.0mm)OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-6.3-7.1M/45MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .248"(6.3mm)-.279"(7.1mm)OD, 45mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-6.3-8.0M/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .248"(6.3mm)-.279"(8.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-6.5-8M/38MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .256"(6.5mm)-.279"(8.0mm)OD, 38mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-7-8.5M/50MWL | ADJUSTABLE "Y" ROTATING SCANNER PROBE 100KHz-2MHz SUPPLIED 4 PIN FISCHER CONNECTOR 50mm WORKING LENGTH. EXPANDABLE FROM 7.0-8.5mmØ. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-7-8.5MM/55MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .275"(7.0mm)-.335"(8.5mm)OD, 55mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-7.0-8.5MM/55MWL | ADJUSTABLE ROTATING SCANNER PROBE 100KHz-2MHz, EXPANDABLE FROM 7.0-8.5mmØ, 55mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-7.0-9.0MM/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .275"(7.0mm)-.354"(9.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-7.8-9.5M/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .307"(7.8mm)-.374"(9.5mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-8-10M/51MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .315"(8.0mm)-.394"(10.0mm)OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-8-9.5M/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .315"(8.0mm)-.374"(9.5mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-8.0-9.0MM/51MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .315"(8.0mm)-.354"(9.0mm)OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-8.0-9.5M/51MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .315"(8.0mm)-.374"(9.5mm)OD, 51mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-8.5-10.5MM/60MWL | ADJUSTABLE ROTATING SCANNER PROBE 100KHz-2MHz, EXPANDABLE FROM 8.5-10.5mmØ, 60mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-8.5-10M/50MWL | ADJUSTABLE "Y" ROTATING SCANNER PROBE 100KHz-2MHz SUPPLIED 4 PIN FISCHER CONNECTOR 50mm WORKING LENGTH. EXPANDABLE FROM 8.5-10.0mmØ. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-9.0-11MM/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .354"(9.0mm)-.433"(11.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-9.5-11M/50MWL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .374"(9.5mm)-.433"(11.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYF-.156-.187/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .156"-.187"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYF-.187-.218 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .187"-.218"OD, 1.3" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYF-.187-.218/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .187"-.218"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYF-.187-.250/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .187"-.250"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYF-.218-.250 | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .218"-.250"OD, 1.3" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYF-.250-.281/1.6WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .250"-.281"OD, 1.6" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYF-.250-.312/1WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .250"-.312"OD, 1.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYF-.250-.312/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .250"-.312"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYF-.312-.375/1WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .312"-.375"OD, 1.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYF-.312-.375/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .312"-.375"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYF-.312-.375/7WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .312"-.375"OD, 7.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYF-.375-.437/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .375"-.437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYF-.375-.437/7WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .375"-.437"OD, 7.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYF-.437-.500/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .437"-.500"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYF-.437-.500/7WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .437"-.500"OD, 7.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYF-.500-.625/2WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .500"-.625"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB-.187-.218/2WL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .187"-.218"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB-.218-.250/2WL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .218"-.250"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB-.250-.312/2WL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .250"-.312"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB-.312-.375/2WL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .312"-.375"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB-.375-.437/2WL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .375"-.437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB-.437-.500/2WL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .437"-.500"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB-.812-.875/2WL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .812"-.875"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB-10.0-12.5M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .394"(10.0mm)-.492"(12.5mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB-12.5-15.0M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .492"(12.5mm)-.591"(15.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB-15.0-17.5M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .591"(15.0mm)-.689(17.5mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB-17.5-20.0M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .689"(17.5mm)-.787"(20.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB-250-.281/1.5WL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .250"-.281"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB-7.5-10.0M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .295"(7.5mm)-.394"(10.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB30-.393-.492/50MWL | ADJUSTABLE EXPANDABLE UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30° DEGREES .039"DIA), (2.0") 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz.. PROBE EXPANDABLE FROM .393"Ø - .492"mm Ø. Includes Test Report and Certi... | 1 | |
| AURYFB30-.492-.590/50MWL | ADJUSTABLE EXPANDABLE UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30° DEGREES .039"DIA), (2.0") 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz.. PROBE EXPANDABLE FROM .492"Ø - .590"mm Ø. Includes Test Report and Certi... | 1 | |
| AURYFB30-.590-.688/50MWL | ADJUSTABLE EXPANDABLE UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30° DEGREES .039"DIA), (2.0") 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz.. PROBE EXPANDABLE FROM .590"Ø - .688"mm Ø. Includes Test Report and Certi... | 1 | |
| AURYFB30-.688-.787/50MWL | ADJUSTABLE EXPANDABLE UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30° DEGREES .039"DIA), (2.0") 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz.. PROBE EXPANDABLE FROM .688"Ø - .787"mm Ø. Includes Test Report and Certi... | 1 | |
| AURYFB30-.787-.885/50MWL | ADJUSTABLE EXPANDABLE UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30° DEGREES .039"DIA), (2.0") 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz.. PROBE EXPANDABLE FROM .787"Ø - .885"mm Ø. Includes Test Report and Certi... | 1 | |
| AURYFB30-.885-.984/50MWL | ADJUSTABLE EXPANDABLE UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30° DEGREES .039"DIA), (2.0") 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz.. PROBE EXPANDABLE FROM .885"Ø - .984"mm Ø. Includes Test Report and Certi... | 1 | |
| AURYFB30-10.0-12.5M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, (COIL ANGLE 30° DEGREES .039"DIA), 100KHz-2MHz, SPILT END, .394"(10.0mm)-.492"(12.5mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB30-11.1-13.3M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, (COIL ANGLE 30° DEGREES .039"DIA), 100KHz-2MHz, SPILT END, .437"(11.1mm)-.524"(13.3mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB30-12.5-15.0M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, (COIL ANGLE 30° DEGREES .039"DIA), 100KHz-2MHz, SPILT END, .492"(12.5mm)-.591"(15.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB30-15.0-17.5M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, (COIL ANGLE 30° DEGREES .039"DIA), 100KHz-2MHz, SPILT END, .591"(15.0mm)-.689"(17.5mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB30-16.0-17.5M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, (COIL ANGLE 30° DEGREES .039"DIA), 100KHz-2MHz, SPILT END, .630"(16.0mm)-.689"(17.5mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB30-20.0-22.5M/50MWL | ADJUSTABLE EXPANDABLE UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30° DEGREES .039"DIA), 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz.. PROBE EXPANDABLE FROM 20.0mmØ -22.5mm Ø. Includes Test Report and Certificate of C | 1 | |
| AURYFB30-22.5-25.0M/50MWL | ADJUSTABLE EXPANDABLE UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30° DEGREES .039"DIA), 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz.. PROBE EXPANDABLE FROM 22.5mmØ -25.0mm Ø. Includes Test Report and Certificate of C | 1 | |
| AURYFB30-9.5-11.1M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, (COIL ANGLE 30° DEGREES .039"DIA), 100KHz-2MHz, SPILT END, .374"(9.5mm)-.437"(11.1mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBF-.187-.218/2WL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .187"-.218"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBF-.218-.250/2WL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .218"-.250"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBF-.250-.312/2WL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .250"-.312"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBF-.312-.375/2WL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .312"-.375"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBF-.375-.437/2WL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .375"-.437"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBF-.437-.500/2WL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .437"-.500"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBF-.500-.562/2WL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .500"-.562"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBF-.562-.625/2WL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, FERRITE SHIELDED, 100KHz-2MHz, SPILT END, .562"-.625"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBU-.125-.156 | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, UNSHIELDED, 100KHz-2MHz, SPILT END, .125"-.156"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBU-.156-.187 | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, UNSHIELDED, 100KHz-2MHz, SPILT END, .156"-.187"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBU-.187-.250 | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, UNSHIELDED, 100KHz-2MHz, SPILT END, .187"-.250"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBU-.250-.312 | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, UNSHIELDED, 100KHz-2MHz, SPILT END, .250"-.312"OD, 1.5" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBU-.312-.375 | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, UNSHIELDED, 100KHz-2MHz, SPILT END, .312"-.375"OD, 2.0 WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBU-.375-.437 | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, UNSHIELDED, 100KHz-2MHz, SPILT END, .375"-.437"OD, 2.0 WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBU-.437-.500 | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, UNSHIELDED, 100KHz-2MHz, SPILT END, .437"-.500"OD, 2.0 WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBU-.500-.562 | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, UNSHIELDED, 100KHz-2MHz, SPILT END, .500"-.562"OD, 2.0 WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBU-.562-.625 | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, UNSHIELDED, 100KHz-2MHz, SPILT END, .562"-.625"OD, 2.0 WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBU-.625-.687 | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, UNSHIELDED, 100KHz-2MHz, SPILT END, .625"-.687"OD, 2.0 WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFBU-.687-.750 | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, UNSHIELDED, 100KHz-2MHz, SPILT END, .687"-.750"OD, 2.0 WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| BH14130 | HOWELL HEATER PROBE - USED TO TEST OVERHEAT SWITCH PART NUMBERS | 4 | |
| BH17336A | HOWELL HEATER PROBE - USED TO TEST OVERHEAT SWITCH PART NUMBERS | 4 | |
| BH24944 | TEMPCAL PROBE KIT (USED ON BOEING 737-300/-500 A/C) | 9 | |
| BH3884-40 | PROBE HEATER..(USED | 5 | |
| BPU-12-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.187 INCH (4.75MM) DIAMETER, 1.1 INCH (2.79CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BPU-16-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.250 INCH (6.35MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BPU-20-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.312 INCH (7.92MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BPU-24-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.375 INCH (9.53MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BPU-32-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.500 INCH (12.7MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BPU-8-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.125 INCH (3.18MM) DIAMETER, 1.1 INCH (2.79CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BPUF-10 | BOLT-HOLE PROBE - 100 KHZ-2.0 MHZ FREQUENCY, SHIELDED, 0.156 IN. (3.96 MM) DIAMETER (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| BPUF-32 | PROBE, ROTARY, 100KHZ-2MHZ FREQUENCY, SHIELDED, 0.500 IN. (12.70 MM) DIAMETER (OLYMPUS NDT OR EQUIVALENT). | 1 | |
| BXM-10/12 | ADJUSTABLE BOLT HOLE PROBE | 1 | |
| BXM-10M-12M | ADJUSTABLE BOLT HOLE PROBE | 1 | |
| BXM-12/16 | ADJUSTABLE MANUAL X HOLE PROBE, .187" - .250", 50-500KHZ, 2" WL | 1 | |
| BXM-16/20 | ADJUSTABLE MANUAL X HOLE PROBE, .250" - .312", 50-500KHZ, 2" WL | 1 | |
| BXU-12-16-2WL | SCANNER PROBE ADJUSTABLE X TYPE, 4.7 MM - 6.5 MM (0.187 IN. - 0.250 IN.), WORKING LENGTH 50.8 MM (2.00 IN.) | 1 | |
| BXU-12/16 | ADJUSTABLE PROBE | 1 | |
| BXU-16-20 | SCANNER PROBES ADJUSTABLE X TYPE, 6.5 MM - 7.9 MM (0.250 IN. - 0.312 IN.), WORKING LENGTH 50.8 MM (2.00 IN.) | 1 | |
| BXU-16/20 | ADJUSTABLE PROBE | 1 | |
| BYMH 3/16-1/4 | ADJUSTABLE BOLT-HOLE PROBE NDT ENGINEERING CORPORATION | 1 | |
| BYU-12/16 | ADJUSTABLE BOLT-HOLE PROBE NDT ENGINEERING CORPORATION | 1 | |
| BYU-16/20 | NDT ADJUSTABLE ROTOPROBE | 1 | |
| C-130 FIXTURE | Custom C-130 Blade Inside Bushing Probe Fixture per Drawing No. 201757983. Material: ABS Plastic machined not 3D Printed. | 1 | |
| C2-100 | USA CONTACT PROBE | 1 | |
| C2-50 | USA CONTACT PROBE | 1 | |
| C2-75 | USA CONTACT PROBE | 1 | |
| C34012-21 | BOX, TEST - TOTAL AIR TEMPERATURE PROBE, AIR DATA SYSTEM (USED ON ROSEMOUNT TAT 102JE2FG. USE WITH DECADE RESISTANCE BO (THE BOEING COMPANY) | 2 | |
| C5-100 | USA CONTACT PROBE | 1 | |
| C5-50 | USA CONTACT PROBE | 1 | |
| C5-75 | USA CONTACT PROBE | 1 | |
| CARB0101 | BEARING RADIUS INSP PROBE: PROBE 0.005" | 1 | |
| CD2-10 | DUAL FOCUS T/R PROBE | 1 | |
| CD5-10 | DUAL FOCUS T/R PROBE | 1 | |
| CSU100-12-4.0WL | UNIVERSAL ROTARY 100 DEGREE COUNTERSINK HOLE PROBE WITH PLASTIC HOUSING. 0.187 INCH (4.76MM) DIAMETER PILOT | 1 | |
| CT4447-1 | TEST PROBES DIFFERENTIAL PROBE KIT, 30MHZ, 700V, 10X/100X, CTUVUS LIST | 1 | |
| D-2069 | SIGMATEST (D2-069) PROBE FOR SIGMATEST (2-069US9068074) | 1 | |
| D790 | 5MHZ ULTRASONIC PROBE AND ITS CABLE COMPATIBLE WITH OLYMPUS ULTRASONIC DIGITAL GAUGE 45 MG | 1 | |
| D7906-SM | 5MHZ ULTRASONIC PROBE AND ITS CABLE COMPATIBLE WITH OLYMPUS ULTRASONIC DIGITAL GAUGE 45 MG | 1 | |
| D794 | 5MHZ ULTRASONIC PROBE AND ITS CABLE COMPATIBLE WITH OLYMPUS ULTRASONIC DIGITAL GAUGE 45 MG | 1 | |
| DAK99-0 | Probe #0 - Pin/Socket - Use with DRK100-1 | 2 | |
| DHC29381-001 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| DO7010-28/1 | 2 WIRE PROBE, 4 PINS MALE PLUG , PARALLEL TIPS, LENGTH - 180MM. REMOTE CONTROL PUSH BUTTON | 1 | |
| DSN-50 | ABSOLUTE SHIELDED METAL SHAFT MICRODOT DETACHABLE PROBE PENCIL FOR USE OF FERROUS & NON FERROUS | 1 | |
| E55647 | OUTBOARD LVTD PROBE ADJUSTMENT | 1 | |
| EC-RO-EK-2-120-2 | EK-2-120-2 PROBE CABLE, POWERLINK OLYMPUS PROBE 7 PIN LEMO 0B TO 8 PIN FISCHER 8M104 2M LONG | 1 | |
| EMFLXY.187-.250 | Probe, Adjustable "Y" type for Rohmann Scanner, Flex Shaft, Ø.187" to .250" x 3.7" from scanner face, 100KHz-2MHz | 1 | |
| EMRX 10/12 | Adjustable X Type probe for Elotest Mini Rotor, .10-12mm 100KHz-2MHz | 1 | |
| EMRX.187-.250 | Adjustable X Type probe for Elotest Mini Rotor, .187"-.250" 100KHz-2MHz | 1 | |
| EMRX.187-.250/2WL | Adjustable X Type probe for Elotest Mini Rotor, .187"-.250" 100KHz-2MHz, 2" WL | 1 | |
| EMRX.250-.312 | Adjustable X Type probe for Elotest Mini Rotor, .250"-.312" 100KHz-2MHz | 1 | |
| EMRX.312-.375 | Adjustable X Type probe for Elotest Mini Rotor, .312"-.375" 100KHz-2MHz | 1 | |
| EMRX.375-.437 | Adjustable X Type probe for Elotest Mini Rotor, .375"-.437" 100KHz-2MHz | 1 | |
| EMRX.437-.500 | Adjustable X Type probe for Elotest Mini Rotor, .437"-.500" 100KHz-2MHz | 1 | |
| EMRX.500-.625 | Adjustable X Type probe for Elotest Mini Rotor, .500"-.625" 100KHz-2MHz | 1 | |
| EMRX.625-.750 | Adjustable X Type probe for Elotest Mini Rotor, .625"-.750" 100KHz-2MHz | 1 | |
| EMRX.750-.875 | Adjustable X Type probe for Elotest Mini Rotor, .750"-.875" 100KHz-2MHz | 1 | |
| EMRX.875-1.0 | Adjustable X Type probe for Elotest Mini Rotor, .875"-1.0" 100KHz-2MHz | 1 | |
| EMRX1.0-1.125 | Adjustable X Type probe for Elotest Mini Rotor, 1.0"-1.125" 100KHz-2MHz | 1 | |
| EMRY.125-.156 | Adjustable Y Type probe for Elotest Mini Rotor, .125"-.156" 100KHz-2MHz | 1 | |
| EMRY.125-.156/3WL | Adjustable Y Type probe for Elotest Mini Rotor, .125"-.156" 100KHz-2MHz, 3"WL | 1 | |
| EMRY.125-.156SS | Adjustable Y Type probe for Elotest Mini Rotor, .125"-.156" 100KHz-2MHz, Stainless Steel | 1 | |
| EMRY.125-.160 | Adjustable Y Type probe for Elotest Mini Rotor, .125"-.160" 100KHz-2MHz | 1 | |
| EMRY.156-.187 | Adjustable Y Type probe for Elotest Mini Rotor, .156"-.187" 100KHz-2MHz | 1 | |
| EMRY.156-.187/3WL | Adjustable Y Type probe for Elotest Mini Rotor, .156"-.187" 100KHz-2MHz, 3"WL | 1 | |
| EMRY.156-.187SS | Adjustable Y Type probe for Elotest Mini Rotor, .156"-.187" 100KHz-2MHz, Stainless Steel | 1 | |
| EMRY.187-.250 | Adjustable Y Type probe for Elotest Mini Rotor, .187"-.250" 100KHz-2MHz | 1 | |
| EMRY.187-.250/2WL | Adjustable Y Type probe for Elotest Mini Rotor, .187"-.250" 100KHz-2MH. 2"WL | 1 | |
| EMRY.187-.250/3WL | Adjustable Y Type probe for Elotest Mini Rotor, .187"-.250" 100KHz-2MHz, 3"WL | 1 | |
| EMRY.187-.250SS | Adjustable Y Type probe for Elotest Mini Rotor, .187"-.250" 100KHz-2MHz, Stainless Steel | 1 | |
| EMRY.250-.312 | Adjustable Y Type probe for Elotest Mini Rotor, .250"-.312" 100KHz-2MHz | 1 | |
| EMRY.250-.312/2WL | Adjustable Y Type probe for Elotest Mini Rotor, .250"-.312" 100KHz-2MHz, 2"WL | 1 | |
| EMRY.312-.375 | Adjustable Y Type probe for Elotest Mini Rotor, .312"-.375" 100KHz-2MHz | 1 | |
| EMRY.375-.437 | Adjustable Y Type probe for Elotest Mini Rotor, .375"-.437" 100KHz-2MHz | 1 | |
| EMRY.437-.500 | Adjustable Y Type probe for Elotest Mini Rotor, .437"-.500" 100KHz-2MHz | 1 | |
| EMRY.500-.625 | Adjustable Y Type probe for Elotest Mini Rotor, .500"-.625" 100KHz-2MHz | 1 | |
| EMRY.625-.750 | Adjustable Y Type probe for Elotest Mini Rotor, .625"-.750" 100KHz-2MHz | 1 | |
| EMRY.750-.875 | Adjustable Y Type probe for Elotest Mini Rotor, .750"-.875" 100KHz-2MHz | 1 | |
| EMRY.875-1.0 | Adjustable Y Type probe for Elotest Mini Rotor, .875"-1.0" 100KHz-2MHz | 1 | |
| EMRY1.0-1.125 | Adjustable Y Type probe for Elotest Mini Rotor, 1.0"-1.125" 100KHz-2MHz | 1 | |
| EMRY1.375-1.500 | Adjustable Y Type probe for Elotest Mini Rotor, 1.375"-1.5" 100KHz-2MHz | 1 | |
| EOBS-CRTU | EOBS-CRTU;Observer Expert Console - No Local Probe - Right To Use license | 1 | |
| ESRX.187-.250 | Adjustable X Type probe for Rohmann Standard Rotor, .187"-.250", 100KHz-2MHz | 1 | |
| ESRX.250-.312 | Adjustable X Type probe for Rohmann Standard Rotor, .250"-.312", 100KHz-2MHz | 1 | |
| ESRX.312-.375 | Adjustable X Type probe for Rohmann Standard Rotor, .312"-.375", 100KHz-2MHz | 1 | |
| ESRX.375-.437 | Adjustable X Type probe for Rohmann Standard Rotor, .375"-.437", 100KHz-2MHz | 1 | |
| ESRX.437-.500 | Adjustable X Type probe for Rohmann Standard Rotor, .437"-.500", 100KHz-2MHz | 1 | |
| ESRX.500-.625 | Adjustable X Type probe for Rohmann Standard Rotor, .500"-.625", 100KHz-2MHz | 1 | |
| ESRX.625-.750 | Adjustable X Type probe for Rohmann Standard Rotor, .625"-.750", 100KHz-2MHz | 1 | |
| ESRX.750-.875 | Adjustable X Type probe for Rohmann Standard Rotor, .750"-.875", 100KHz-2MHz | 1 | |
| ESRX.875-1.0 | Adjustable X Type probe for Rohmann Standard Rotor, .875"-1.0", 100KHz-2MHz | 1 | |
| ESRX1.0-1.125 | Adjustable X Type probe for Rohmann Standard Rotor, 1.0"-1.125", 100KHz-2MHz | 1 | |
| ESRX1.125-1.25 | Adjustable X Type probe for Rohmann Standard Rotor, 1.125"-1.25", 100KHz-2MHz | 1 | |
| ESRX1.250-1.375 | Adjustable X Type probe for Rohmann Standard Rotor, 1.250-1.375", 100KHz-2MHz | 1 | |
| ESRX12-15M/60WL | Adjustable X Type probe for Rohmann Standard Rotor, 12-15mm, 60mm WL, 100KHz-1MHz | 1 | |
| ESRY 30-35M | Elotest Std Rotor Probe, Adjustable Ø30-35mm x 50mm WL, 100KHz-2MHz | 1 | |
| ESRY 35-40M | Elotest Std Rotor Probe, Adjustable Ø35-40mm x 50mm WL, 100KHz-2MHz | 1 | |
| ESRY 40-45M | Elotest Std Rotor Probe, Adjustable Ø40-45mm x 50mm WL, 100KHz-2MHz | 1 | |
| EXBD40-50013-011 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| EXBD400-50013-013 | CTS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| EXBD400-50013−011 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| EXBD400-50013−013 | CTS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| EXBD400−50013−011 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| EXBD400−50013−013 | CTS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| F28318000 | CONTOUR PROBE KIT(CONNECTING CABLE FOR OLYMPUS NORTEC 600D ECI MACHINE) | 1 | |
| FBP-P5000I | FBP-P5000I;Digital Analysis Probe USB2.0 Incl. Fibercheckpro SW | 1 | |
| FBP-P5000I-ENC | FBP-P5000I-ENC;FBP-P5000i USB Probe Microscope | 1 | |
| FBP-P5000I-NAVY | FBP-P5000I-NAVY;Navy Digital Analysis Probe USB2.0 Incl. Fibercheckpro SW | 1 | |
| FBP-P5000N | FBP-P5000N;USB 2.0 Inspection Probe No PASS/FAIL Analysis | 1 | |
| FBP-SD01 | INSPECTION PROBE - FIBER OPTIC (USED WITH LAPTOP COMPUTER AS SCREEN DISPLAY) | 1 | |
| FBP-SD101 | INSPECTION PROBE - FIBER OPTIC (USED WITH LAPTOP COMPUTER AS SCREEN DISPLAY) | 2 | |
| FBPT-GHD | FBPT-GHD;Tip, Glenair GHD Inspection, Used with GHD Test Probes | 1 | |
| FCLT-MIL2-CPA | FCLT-MIL2-CPA;CleanBlast Tip for Use with Glenair 38999 Test Probe Adapter | 1 | |
| FF-IV96G | TIP ADAPTOR FOR 6-MM DIA PROBE UNIT (OLYVPUS) | 1 | |
| FPAS-3 | DEFECTOMETER SURFACE PROBE, STRAIGHT, 3" WITH .5" LONG TIP AND 2.5" HANDLE, SHIELDED, AUSTENITIC, 2M | 1 | |
| FPF95-6B | Defectometer Surface Probe, 90° x .5" drop x 6" Long, Ferrous, 30° bent handle | 1 | |
| FPN-10 | Defectometer Surface Probe, STRAIGHT 10" LONG, Unshielded, Non-ferrous | 1 | |
| FPN-3 | Defectometer Surface Probe, STRAIGHT 3" LONG, Unshielded, Non-ferrous | 1 | |
| FPN-4 | Defectometer Surface Probe, STRAIGHT 4" LONG, Unshielded, Non-ferrous | 1 | |
| FPN-5 | Defectometer Surface Probe, STRAIGHT 5" LONG, Unshielded, Non-ferrous | 1 | |
| FPN-6 | Defectometer Surface Probe, STRAIGHT 6" LONG, Unshielded, Non-ferrous | 1 | |
| FPN-7 | Defectometer Surface Probe, STRAIGHT 7" LONG, Unshielded, Non-ferrous | 1 | |
| FPN-8 | Defectometer Surface Probe, STRAIGHT 8" LONG, Unshielded, Non-ferrous | 1 | |
| FPN-9 | Defectometer Surface Probe, STRAIGHT 8" LONG, Unshielded, Non-ferrous | 1 | |
| FPN44-4 | Defectometer Surface Probe, 45deg, .4" drop, 4"long, .156" Shaft, Unshielded, Non-ferrous | 1 | |
| FPN95-10 | Defectometer Surface Probe, 90deg, .5" drop, 10", Unshielded, Non-ferrous | 1 | |
| FPN95-3 | Defectometer Surface Probe, 90deg, .5" drop, 3", Unshielded, Non-ferrous | 1 | |
| FPN95-4 | Defectometer Surface Probe, 90deg, .5" drop, 4", Unshielded, Non-ferrous | 1 | |
| FPN95-5 | Defectometer Surface Probe, 90deg, .5" drop, 5", Unshielded, Non-ferrous | 1 | |
| FPN95-6 | Defectometer Surface Probe, 90deg, .5" drop, 6", Unshielded, Non-ferrous | 1 | |
| FPN95-7 | Defectometer Surface Probe, 90deg, .5" drop,7", Unshielded, Non-ferrous | 1 | |
| FPN95-8 | Defectometer Surface Probe, 90deg, .5" drop, 8", Unshielded, Non-ferrous | 1 | |
| FPN95-9 | Defectometer Surface Probe, 90deg, .5" drop, 9", Unshielded, Non-ferrous | 1 | |
| FPNS-3 | Defectometer Surface Probe, Straight, 3" with .5" long tip and 2.5" handle, Shielded, Non-ferrous, 2Mhz, Microdot connector | 1 | |
| FPNS-3L00 | Defectometer Surface Probe, Straight, 3" with .5" long tip and 2.5" handle, Shielded, Non-ferrous, 2Mhz, Lemo connector | 1 | |
| FPNS-7 | Defectometer Surface Probe, Straight, 7" Long, Shielded, Non-ferrous, 2Mhz, Microdot connector | 1 | |
| FPNS44-4/L00 | Defectometer Surface Probe, 45deg, .4" drop, 4"long, .156" Shaft, Shielded, Non-ferrous, L00 Connector | 1 | |
| FPNS82-4 | Defectometer Surface Probe, 80 Deg, 4", Shielded, Non-ferrous | 1 | |
| FPNS94-4 | Defectometer Surface Probe, 90deg, .4" drop, 4"long, .156" Shaft, Shielded, Non-ferrous | 1 | |
| FPNS94-7 | Defectometer Surface Probe, °90 x .4" drop, 7" with 3" handle and 4" shaft, Shielded, Non-ferrous | 1 | |
| FPNS95-9 | Defectometer Surface Probe, 90° x .5" drop, 9" with 3" handle and 6" shaft, Shielded, Non-ferrous, Microdot Connector | 1 | |
| GE XLGO 6160+ system (6m) | GE XLGO 6160+ system (6m) - 6.1mm/6m Videoprobe + Stereo Measurement, XpertSuite enhances the probability of detecting and identifying flaws using precise steering, superior visibility and easier viewing | 1 | |
| GE-XL GO PLUS | GE-XL GO PLUS VIDEO PROBE | 1 | |
| GS21429-3 | TEST DIFFUSER (WITH SPEED PICKUP AND DISPLACEMENT PROBE) | 1 | |
| HB-2344 | TGB BEVEL GEAR - OLYMPUS TEST PROBE /ULTRA SONIC | 1 | |
| HB2344 | TGB BEVEL GEAR - OLYMPUS TEST PROBE /ULTRA SONIC | 1 | |
| HHGA-7 | 4 GAS EXHAUST PROBE | 1 | |
| HHGA-9 | 5 GAS EXHAUST PROBE | 1 | |
| HRX.187-.250 | Adjustable Scanner Probe, X type for Hocking Mini, .187"-250" Diameter, 100KHZ-2MHZ | 1 | |
| HRX.187-.250/2M | Adjustable Scanner Probe, X type for Hocking Mini, .187"-250" Diameter, 1-3MHz | 1 | |
| HRX.250-.312 | Adjustable Scanner Probe, X type for Hocking Mini, .250"-312" Diameter, 100KHZ-2MHZ | 1 | |
| HRX.250-.312/2M | Adjustable Scanner Probe, X type for Hocking Mini, .187"-250" Diameter,1-3Mhz | 1 | |
| HRX.312-.375 | Adjustable Scanner Probe, X type for Hocking Mini, .312"-375" Diameter, 100KHZ-2MHZ | 1 | |
| HRX.312-.375/2M | Adjustable Scanner Probe, X type for Hocking Mini, .312"-375" Diameter, 1-3MHz | 1 | |
| HRX.375-.437 | Adjustable Scanner Probe, X type for Hocking Mini, .375"-437" Diameter, 100KHZ-2MHZ | 1 | |
| HRX.375-.437/2M | Adjustable Scanner Probe, X type for Hocking Mini, .375"-437" Diameter, 1-3MHz | 1 | |
| HRX.437-.500 | Adjustable Scanner Probe, X type for Hocking Mini, .437"-500" Diameter, 100KHz-2MHz | 1 | |
| HRX.500-.625 | Adjustable Scanner Probe, X type for Hocking Mini, .500"-625" Diameter, 100KHz-2MHz | 1 | |
| HRX.500-.625/3WL | Adjustable Scanner Probe, X type for Hocking Mini, .500"-625" Diameter, 100KHz-2MHz, 3"WL | 1 | |
| HRX.625-.750 | Adjustable Scanner Probe, X type for Hocking Mini, .625"-750" Diameter, 100KHz-2MHz | 1 | |
| HRX.750-.875 | Adjustable Scanner Probe, X type for Hocking Mini, .750"-.875" Diameter, 100KHz-2MHz | 1 | |
| HRX.875-1.0 | ADJUSTABLE SCANNER PROBE | 1 | |
| HRX.875-1.0/4WL | Adjustable Scanner Probe, X type for Hocking Mini, .875"-1.0" Diameter, 100KHz-2MHz, 4"WL | 1 | |
| HRX.875-1.000 | Adjustable Scanner Probe, X type for Hocking Mini, .875"-1.0" Diameter, 100KHz-2MHz | 1 | |
| HRX1.0-1.125 | Adjustable Scanner Probe, X type for Hocking Mini, 1.0"-1.125" Diameter, 100KHz-2MHz | 1 | |
| HRX2.0-2.125 | Adjustable Scanner Probe, X type for Hocking Mini, 2.0"-2.125" Diameter, 100KHz-2MHz | 1 | |
| HRX2.125-2.25 | Adjustable Scanner Probe, X type for Hocking Mini, 2.125"-2.25" Diameter, 100KHz-2MHz | 1 | |
| HRX2.25-2.375 | Adjustable Scanner Probe, X type for Hocking Mini, 2.25"-2.375" Diameter, 100KHz-2MHz | 1 | |
| HRX2.375-2.5 | Adjustable Scanner Probe, X type for Hocking Mini, 2.375"-2.5" Diameter, 100KHz-2MHz | 1 | |
| HRY-.500-.625 | ADJUSTABLE HOLE PROBE, Y TYPE, HOCKING SCANNER, Ø.500" TO .625", 2"WL, 100KHZ TO 2MHZ | 1 | |
| HRY-312-375 | ADJUSTABLE HOLE PROBE, Y TYPE, .312"Ø TO .375"Ø, 2"WL, 100KHZ TO 2MHZ | 1 | |
| HRY.125-.156 | Adjustable Hole Probe, Y Type, .125"Ø to .156"Ø, 1.5"WL, 100KHz to 2MHz | 1 | |
| HRY.125-.156/2M | Adjustable Hole Probe, Y Type, .125"Ø to .156"Ø, 1.5"WL, 1-3Mhz | 1 | |
| HRY.125-.156/4WL | Adjustable Hole Probe, Y Type, .125"Ø to .156"Ø, 4"WL, 100KHz to 2MHz | 1 | |
| HRY.125-.156SS | Adjustable Hole Probe, Y Type, .125"Ø to .156"Ø, 1.5"WL, 100KHz to 2MHz, Stainless Steel | 1 | |
| HRY.125-.187 | Adjustable Scanner Probe, Y type for Hocking Mini, 100KHZ-2MHZ | 1 | |
| HRY.156-.187 | Adjustable Hole Probe, Y Type, .156"Ø to .187"Ø, 1.5"WL, 100KHz to 2MHz | 1 | |
| HRY.156-.187/2M | Adjustable Hole Probe, Y Type, .156"Ø to .187"Ø, 1.5"WL, 1-3MHz | 1 | |
| HRY.156-.187/2WL | Adjustable Hole Probe, Y Type, .156"Ø to .187"Ø, 2"WL, 100KHz to 2MHz | 1 | |
| HRY.156-.187/4WL | Adjustable Hole Probe, Y Type, .156"Ø to .187"Ø, 4"WL, 100KHz to 2MHz | 1 | |
| HRY.156-.187SS | Adjustable Hole Probe, Y Type, .156"Ø to .187"Ø, 1.5"WL, 100KHz to 2MHz, Stainless Steel | 1 | |
| HRY.187-.250 | Adjustable Hole Probe, Y Type, .187"Ø to .250"Ø, 1.5"WL, 100KHz to 2MHz | 1 | |
| HRY.187-.250/2WL | Adjustable Hole Probe, Y Type, .187"Ø to .250"Ø, 2"WL, 100KHz to 2MHz | 1 | |
| HRY.187-.250/4WL | Adjustable Hole Probe, Y Type, .187"Ø to .250"Ø, 4"WL, 100KHz to 2MHz | 1 | |
| HRY.187-.250SS | Adjustable Hole Probe, Y Type, .187"Ø to .250"Ø, 1.5"WL, 100KHz to 2MHz, Stainless Steel | 1 | |
| HRY.187-.250T | Adjustable Hole Probe, Y Type, .187"Ø to .250"Ø, 1.5"WL, 100KHz to 2MHz, Titanium Tip | 1 | |
| HRY.250-.281SS | Adjustable Hole Probe, Y Type, .250"Ø to .281"Ø, 100KHz to 2MHz, Stainless Steel 1.5"WL | 1 | |
| HRY.250-.312 | Adjustable Hole Probe, Y Type, Hocking Scanner, Ø.250" to .312", 1.5"WL, 100KHz to 2MHz | 1 | |
| HRY.250-.312/4WL | Adjustable Hole Probe, Y Type, .250"Ø to .312"Ø, 4"WL, 100KHz to 2MHz | 1 | |
| HRY.250-.312SS | Adjustable Hole Probe, Y Type, .250"Ø to .312"Ø, 1.5"WL, 100KHz to 2MHz, Stainless Steel | 1 | |
| HRY.312-.375 | Adjustable Hole Probe, Y Type, .312"Ø to .375"Ø, 2"WL, 100KHz to 2MHz | 1 | |
| HRY.312-.375/4WL | Adjustable Hole Probe, Y Type, .312"Ø to .375"Ø, 4"WL, 100KHz to 2MHz | 1 | |
| HRY.312-.375SS | Adjustable Hole Probe, Y Type, .312"Ø to .375"Ø, 2"WL, 100KHz to 2MHz, Stainless Steel | 1 | |
| HRY.312-.375T | Adjustable Hole Probe, Y Type, .312"Ø to .375"Ø, 2"WL, 100KHz to 2MHz, Ti Potting | 1 | |
| HRY.375-.437 | Adjustable Hole Probe, Y Type, Hocking Scanner, Ø.375" to .437", 2"WL, 100KHz- 2MHz | 1 | |
| HRY.375-.437/4WL | Adjustable Hole Probe, Y Type, .374"Ø to .437"Ø, 4"WL, 100KHz to 2MHz | 1 | |
| HRY.375-.437SS | Adjustable Hole Probe, Y Type, .375"Ø to .437"Ø, 2"WL, 100KHz- 2MHz, Stainless Steel | 1 | |
| HRY.437-.500 | Adjustable Hole Probe, Y Type, Hocking Scanner, Ø.437" to .500", 2"WL, 100KHz to 2MHz | 1 | |
| HRY.437-.500/4WL | Adjustable Hole Probe, Y Type, .437"Ø to .500"Ø, 4"WL, 100KHz to 2MHz | 1 | |
| HRY.437-.500SS | Adjustable Hole Probe, Y Type, .437"Ø to .500"Ø, 2"WL, 100KHz to 2MHz, Stainless Steel | 1 | |
| HRY.500-.562SS | Adjustable Hole Probe, Y Type, Hocking Scanner, Ø.500" to .562", 2"WL, 100KHz to 2MHz, Stainless | 1 | |
| HRY.500-.625 | Adjustable Hole Probe, Y Type, Hocking Scanner, Ø.500" to .625", 2"WL, 100KHz to 2MHz | 1 | |
| HRY.500-.625/2WL | Adjustable Hole Probe, Y Type, Hocking Scanner, Ø.500" to .625", 2"WL, 100KHz to 2MHz | 1 | |
| HRY.500-.625/4WL | Adjustable Hole Probe, Y Type, .500"Ø to .625"Ø, 4"WL, 100KHz to 2MHz | 1 | |
| HRY.562-.625SS | Adjustable Hole Probe, Y Type, Hocking Scanner, Ø.562" to .625", 2"WL, 100KHz to 2MHz, Stainless | 1 | |
| HRY.625-.687SS | Adjustable Hole Probe, Y Type, Hocking Scanner, Ø.625" to .687", 2"WL, 100KHz to 2MHz, Stainless | 1 | |
| HRY.625-.750 | Adjustable Hole Probe, Y Type, Hocking Scanner, Ø.625" to .750", 2"WL, 100KHz-2Mhz | 1 | |
| HRY.687-.750SS | Adjustable Hole Probe, Y Type, Hocking Scanner, Ø.687" to .750", 2"WL, 100KHz to 2MHz, Stainless | 1 | |
| HRY.750-.812SS | Adjustable Hole Probe, Y Type, Hocking Scanner, Ø.750" to .812", 2"WL, 100KHz to 2MHz, Stainless | 1 | |
| HRY.750-.875 | Adjustable Scanner Probe, Y type for Hocking Mini, 100KHZ-2MHZ | 1 | |
| HRY.750-875 | ADJUSTABLE SCANNER PROBE, Y TYPE FOR HOCKING MINI, 100KHZ-2MHZ | 1 | |
| HRY.812-.875SS | Adjustable Hole Probe, Y Type, Hocking Scanner, Ø.812" to .875", 2"WL, 100KHz to 2MHz, Stainless | 1 | |
| HRY.875-.937SS | Adjustable Hole Probe, Y Type, Hocking Scanner, Ø.875" to .937", 2"WL, 100KHz to 2MHz, Stainless | 1 | |
| HRY.875-1.0 | ADJUSTABLE SCANNER PROBE, Y TYPE FOR HOCKING MINI, 100KHZ-2MHZ, 2WL | 1 | |
| HRY.875-1.0/2WL | Adjustable Scanner Probe, Y type for Hocking Mini, 100KHZ-2MHZ, 2WL | 1 | |
| HRY.875-1.0/4WL | Adjustable Scanner Probe, Y type for Hocking Mini, 100KHZ-2MHZ, 4WL | 1 | |
| HRY.875-1.000 | Adjustable Scanner Probe, Y type for Hocking Mini, 100KHZ-2MHZ | 1 | |
| HRY.937-1.0SS | Adjustable Hole Probe, Y Type, Hocking Scanner, Ø.937" to 1.0", 2"WL, 100KHz to 2MHz, Stainless | 1 | |
| HRY1.0-0.125 | ADJUSTABLE SCANNER PROBE, Y TYPE FOR HOCKING MINI, 100KHZ-2MHZ | 1 | |
| HRY1.0-1.125 | Adjustable Scanner Probe, Y type for Hocking Mini, 100KHZ-2MHZ | 1 | |
| HRY1.0-1.125/2WL | Adjustable Scanner Probe, Y type for Hocking Mini, 100KHZ-2MHZ, 2WL | 1 | |
| HRY1.0-1.125/4WL | Adjustable Scanner Probe, Y type for Hocking Mini, 100KHZ-2MHZ, 4WL | 1 | |
| HRY1.000-1.125 | Adjustable Scanner Probe, Y type for Hocking Mini, 500KHZ-2MHZ | 1 | |
| HRY1.125-1.250 | Adjustable Scanner Probe, Y type for Hocking Mini, 500KHZ-2MHZ | 1 | |
| HRY1.250-1.375 | Adjustable Scanner Probe, Y type for Hocking Mini, 500KHZ-2MHZ | 1 | |
| HRY1.375-1.500 | Adjustable Scanner Probe, Y type for Hocking Mini, 500KHZ-2MHZ | 1 | |
| HRY1.500-1.625 | Adjustable Scanner Probe, Y type for Hocking Mini, 500KHZ-2MHZ | 1 | |
| HRY1.625-1.750 | Adjustable Scanner Probe, Y type for Hocking Mini, 500KHZ-2MHZ | 1 | |
| HRY1.750-1.875 | Adjustable Scanner Probe, Y type for Hocking Mini, 500KHZ-2MHZ | 1 | |
| HRY1.875-2.000 | Adjustable Scanner Probe, Y type for Hocking Mini, 500KHZ-2MHZ | 1 | |
| I30 | PROBE, CLAMP-ON - CURRENT,AC/DC, NO NEED ANOTHER METHOD USED | 6 | |
| IAE2R18901 | ACOUSTIC EMISSION PROBE | 7 | |
| IV9420GL | INDUSTRIAL VIDEOSCOPE IPLEX G LITE-PROBE 4MM - ELECTRIC TOOL | 1 | |
| IV9435N | OLYMPUS IPLEX NX VIDEOPROBE | 1 | |
| JMP/CF34-3A1/D/6850 | Engine Probe Bombardier CRJ100, Bombardier Challenger 604 CF34-3A1 (Long Probes, Thrust Reversers closed) | 1 | |
| JMP/CF34-8C5/D/6844 | Engine Probe Bombardier CRJ700, 900 CF34-8C5 (Long Probes Thrust Reversers closed) | 1 | |
| JMP/CF34-8E/D/6940 | Engine Probe Embraer 170 & 175 CF34-8E (Long Probes Thrust Reversers closed) | 1 | |
| JMP/CF34/D/6932 | Engine Probe Embraer 190 & 195 CF34-10E (Long Probes Thrust Reversers closed) | 1 | |
| JMP/CF6/D/4247 | Engine Probe Boeing 767, Airbus A310 CF6-80A2/A3 | 1 | |
| JMP/CF6/D/4702 | ENGINE PROBE AIRBUS A330 TRENT 772 | 1 | |
| JMP/CF6/D/4947 | Engine Probe Airbus A330 CF6-80E1 | 3 | |
| JMP/CF6/D/6418 | Engine Probe (MDC)MD-11, Airbus A300, A310 CF6-80C2 D1F/A5F/A5/A3 | 1 | |
| JMP/CF6/D/6511 | Engine Probe Boeing 747/767, Airbus A330-200, (MDC)MD-11, Airbus A300-600F, Airbus A310-200F CF6-80C2, CF6-80E1, CF6-80C2 D1F, CF6-80C2 A5F, CF6-80C2 A3 | 1 | |
| JMP/CFM56/D/4435 | Engine Probe Airbus A320, RE-Engined DC8, AWACS CFM56-2 & 5A | 2 | |
| JMP/CFM56/D/4462 | CFM: SET (PORT & STARBOARD) CFM56-7 SHORT ENGINE PROBES, PER SET THRUST REVERSERS OPEN | 5 | |
| JMP/CFM56/D/4605 | Engine Probe Airbus A320, A340 CFM56-5B/C | 3 | |
| JMP/CFM56/D/6527 | Engine Probe Airbus A321 CFM56-5B (Long Probes Thrust Reversers closed) 89” | 2 | |
| JMP/CFM56/D/6645 | Engine Probe Boeing 737-700/800 CFM56-7B (Long Probes Thrust Reversers closed) | 2 | |
| JMP/CFM56/D/6987 | Engine Probe Boeing 737-300-400 CFM56-3 (Long Probes Thrust Reversers closed) | 1 | |
| JMP/GE90-115B/D/4948 | Engine Probe Boeing 777-300ER GE90-115B (Long Probes Thrust Reversers closed)135” | 1 | |
| JMP/GE90/D/4599 | Engine Probe Boeing 777 GE90 (Long Probes Thrust Reversers closed) 127 1⁄2” | 1 | |
| JMP/GP7200/D/6836 | Engine Probe Airbus A380 GP7200 (Long Probes Thrust Reversers closed) | 1 | |
| JMP/GP7200/D/7035 | Engine Probe Airbus A380 GP7200 | 1 | |
| JMP/JT8D/D/6627 | Engine Probe (MDC)MD-83 P & W JT8D-219 (Long Probes Thrust Reversers closed) 201” | 1 | |
| JMP/LEAP/D/7028 | Engine Probe Airbus A320 Neo, Boeing 737 Max LEAP | 2 | |
| JMP/PASSPORT/D/7010 | Engine Probe GE Passport (Long Probes Thrust Reversers closed) | 1 | |
| JMP/PERM/D/6581 | Engine Probe Ilyushin IL96 PERM PS-90A 185” | 1 | |
| JMP/PW2000/D/6846 | Engine Probe Boeing 757 P & W 2000 (Long Probes Thrust Reversers closed) | 1 | |
| JMP/PW4000/D/4856 | Engine Probe Boeing 767-200/300, Airbus A300/A310,(MDC)MD-11 P & W 4000-94” Fan (PW 4152/4158/4462) | 1 | |
| JMP/PW4000/D/6216 | Engine Probe Airbus A330/200/300 P & W 4000-100” Fan | 1 | |
| JMP/PW4000/D/6601 | Engine Probe Boeing 767-300, Airbus A300/A310,(MDC)MD-11, Boeing 747-400 P & W 4000-94” Fan (Long Probes Thrust Reversers closed) 85” | 1 | |
| JMP/PW4000/D/6728 | Engine Probe Boeing 777-200 P & W 4000-112” Fan (Long Probes Thrust Reversers closed) | 1 | |
| JMP/RB211/D/4249 | Engine Probe Boeing 747-400 RB211-524 G&H (Long Probes Thrust Reversers closed)178” | 1 | |
| JMP/RB211/D/6984 | Engine Probe Boeing 757 RB211-535E4 (Long Probes Thrust Reversers closed) | 1 | |
| JMP/TRENT-XWB/D/6834 | Engine Probe Airbus A350 TRENT XWB (Long Probes Thrust Reversers closed) | 1 | |
| JMP/TRENT-XWB/D/6834/01A | Engine Probe Airbus A350 TRENT XWB/900 (Long Probes, hook only) | 1 | |
| JMP/TRENT/D/4702 | Engine Probe Airbus A330 TRENT 772 | 4 | |
| JMP/TRENT/D/6188 | Engine Probe Airbus A340-600 TRENT 500 | 1 | |
| JMP/TRENT/D/6592 | Engine Probe Airbus A330 TRENT 772 (Long Probes Thrust Reversers closed)185” | 1 | |
| JMP/TRENT/D/6615 | Engine Probe Airbus A340-600 TRENT 500 (Long Probes Thrust Reversers closed) | 1 | |
| JMP/TRENT/D/6754 | Engine Probe Boeing 787 TRENT 1000 (Long Probes Thrust Reversers closed) | 1 | |
| JMP/TRENT/D/6776 | Engine Probe Airbus A380-800/900 TRENT 900 (Long Probes Thrust Reversers closed)133” | 1 | |
| JMP/TRENT/D/6935 | Engine Probe Boeing 777-200ER TRENT 800 (Long Probes Thrust Reversers closed) | 1 | |
| JMP/TRENT/D/7015 | Engine Probe Boeing 787 TRENT 1000 (Long Probes Thrust Reversers closed -*test cell) | 1 | |
| JMP/V2500/D/4040 | Engine Probe Airbus A320 V2500 | 2 | |
| JMP/V2500/D/6561 | Engine Probe Airbus A320 V2500 (Long Probes Thrust Reversers closed)160” | 2 | |
| JMP/V2500/D/6562/MD | Engine Probe (MDC)MD-90 V2525 D5 (Long Probes Thrust Reversers closed) | 1 | |
| KAPS 330-1E | Custom Design Parametric Probe | 1 | |
| KAS42-5E | SPECIAL PROBE, 500HZ-250KHZ, REFLECTION, CUSTOMER SPECIFY CONNECTOR | 3 | |
| KPC3-775-625 | Sesame Technologies KPC3-775-625 Pitot Probe Cover, Kevlar, Use KPC3-775-625=05 | 15 | |
| KPC4-480-325 | AIRBUS PITOT PROBE C | 9 | |
| KT-8M-08F3B | HANDLE WITH VARIOUS DELRIN PROBES | 1 | |
| LAN98F34103003000 | PITOT PROBE FLUSHING TOOL | 1 | |
| LEMO FLA.00 | USM GO PROBE LEAD CABLE | 1 | |
| LT 82-1E | Hand Held Probe Assembly for Airbus Manh | 1 | |
| LTCT25565-01 | Probe Assembly, Combustor Housing Pressure | 1 | |
| MARP-RUK -2-6-7-45 | PROBE ADJUSTABLE ROTORY DIA 6-7MM | 1 | |
| MARP-RUK-2-10-12-70 | Probe adjustable rotory dia 10-12mm | 1 | |
| MARP-RUK-2-15-20-110 | Probe adjustable rotory dia 15-20mm | 1 | |
| MARP-RUK-2-5-6-30 | Probe adjustable rotory dia 5-6mm | 1 | |
| MARP-RUK-2-6-7-45 | Probe adjustable rotory dia 6-7mm | 1 | |
| MARP-RUK-2-7-8.5-55 | Probe adjustable rotory dia 7-8mm | 1 | |
| MARP-RUK-2-8.5-10-60 | Probe adjustable rotory dia 8.5mm-10mm | 1 | |
| MHX.125-.156 | Adjustable Manual X Hole Probe, .125"Ø to .156"Ø, 50-500K | 1 | |
| MHX.156-.187 | Adjustable Manual X Hole Probe, ..156"-.187", 50-500K | 1 | |
| MHX.187-.250 | Adjustable Manual X Hole Probe, .187" - .250", 50-500KHz | 1 | |
| MHX.250-.312 | Adjustable Manual X Hole Probe, .250" - .312", 50-500KHz | 1 | |
| MHX.250-.312/500K/3WL | Adjustable Manual X Hole Probe, .250"Ø to .312"Ø, 500KHz, 3" WL | 1 | |
| MHX.312-.375 | Adjustable Manual X Hole Probe, .312" - .375", 50-500KHz | 1 | |
| MHX.312-.375/500K/3WL | Adjustable Manual X Hole Probe, .312"Ø to .375"Ø, 500KHz, 3" WL | 1 | |
| MHX.375-.437 | Adjustable Manual X Hole Probe, .375" - .437", 50-500KHz | 1 | |
| MHX.375-.437/2M | Adjustable Manual X Hole Probe, .375" - .437", 1-3MHZ | 1 | |
| MHX.375-.437/500K/3WL | Adjustable Manual X Hole Probe, .375"Ø to .437"Ø, 500KHz, 3" WL | 1 | |
| MHX.437-.500 | Adjustable Manual X Hole Probe, .437" - .500", 50-500KHz | 1 | |
| MHX.437-.500/2M | Adjustable Manual X Hole Probe, .437-.500 500KHz-1MHz | 1 | |
| MHX.437-.500/500K/3WL | Adjustable Manual X Hole Probe, .437"Ø to .500"Ø, 500KHz, 3" WL | 1 | |
| MHX.437-.500/5WL | Adjustable Manual X Hole Probe, .437" - .500", 5" WL, 50-500KHz | 1 | |
| MHX.500-.625/5WL | Adjustable Manual X Hole Probe, .500" - .625", 5" WL, 50-500KHz | 1 | |
| MHX.562-.625 | Adjustable Manual X Hole Probe, .562 - .625", 50-500KHz | 1 | |
| MHX.625-.750 | Adjustable Manual X Hole Probe, .625" - .750", 50-500KHz | 1 | |
| MHX.625-.750/2M | Adjustable Manual X Hole Probe, .625" - .750", 1-3 MHz | 1 | |
| MHX.750-.875 | Adjustable Manual X Hole Probe, .750" - .875", 50-500KHz | 1 | |
| MHX.875-1.0 | Adjustable Manual X Hole Probe, .875" - 1.0", 50-500KHz | 1 | |
| MHX1.0-1.125/4WL | Manual Hole Probe, Adjustable "X" Type, 1.0" - 1.125" | 1 | |
| MHXF.187-.250 | Adjustable Manual X Hole Probe, .187" - .250", 50-500KHz | 1 | |
| MHXF.250-.312 | Adjustable Manual X Hole Probe, .250" - .312", 50-500KHz | 1 | |
| MHXF.312-.375 | Adjustable Manual X Hole Probe, .312" - .375", 50-500KHz | 1 | |
| MHXF.375-.437 | Adjustable Manual X Hole Probe, .375" - .437", 50-500KHz | 1 | |
| MHXF.437-.500 | Adjustable Manual X Hole Probe, .437" - .500", 50-500KHz | 1 | |
| MHXF.437-.500/6WL | Adjustable Manual X Hole Probe, .437" - .500", 50-500KHz 6WL | 1 | |
| MHXF.500-.625 | Adjustable Manual X Hole Probe, .500" - .625", 50-500KHz | 1 | |
| MHXF.625-.750 | Adjustable Manual X Hole Probe, .625" - .750", 50-500KHz | 1 | |
| MHXF.750-.875 | Adjustable Manual X Hole Probe, .750" - .875", 50-500KHz | 1 | |
| MHXF.875-1.0 | Adjustable Manual X Hole Probe, .875" - 1.0", 50-500KHz | 1 | |
| MINIMITE 9744738 | ROTATING BOLTHOLE SCANNER (OLYMPUS NDT OR EQUIVALENT) SLIDING PROBE, REFLECTION, SHIELDED, 400 HZ TO 50 KHZ FREQUENCY, 0.800 IN. (20.32 MM) WIDE BY 2.000 IN. (50.80 MM) LONG, 4 PINS LEMO CONNECTOR (GEIT OR EQUIVALENT) | 1 | |
| MMP-455-60FX ((MICRODOT TYPE - FREQUENCY 50 TO 500KHZ - ANGLE 45 DEGREE) | PROBE(CONNECTING CABLE FOR OLYMPUS NORTEC 600D ECI MACHINE) | 1 | |
| MP905-80FX | FLEXIBLE COPPER SHAFT PROBE - SURFACE, 90 DEGREE, 500 KHZ FREQUENCY, NFE, ABSOLUTE, SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 8.0 IN. (203.2 MM) LONG, 0.50 IN. (12.7 MM) TIP LENGTH, (OLYMPUS OR EQUIVALENT) | 1 | |
| MRRP-RUK-1-10.3-50 | mini probe for use with MR3 hand rotor | 1 | |
| MRRP-RUK-1-11.1-50 | mini probe for use with MR3 hand rotor | 1 | |
| MRRP-RUK-1-11.5-50 | mini probe for use with MR3 hand rotor | 1 | |
| MRRP-RUK-1-11.9-50 | mini probe for use with MR3 hand rotor | 1 | |
| MRRP-RUK-1-12.7-50 | mini probe for use with MR3 hand rotor | 1 | |
| MRRP-RUK-1-16.6-75 | mini probe for use with MR3 hand rotor | 1 | |
| MRRP-RUK-1-17.4-75 | mini probe for use with MR3 hand rotor | 1 | |
| MRRP-RUK-1-17.8-75 | mini probe for use with MR3 hand rotor | 1 | |
| MRRP-RUK-1-18.2-75 | mini probe for use with MR3 hand rotor | 1 | |
| MRRP-RUK-1-19.0-75 | mini probe for use with MR3 hand rotor | 1 | |
| MRRP-RUK-1-19.4-75 | mini probe for use with MR3 hand rotor | 1 | |
| MRRP-RUK-1-19.8-75 | mini probe for use with MR3 hand rotor | 1 | |
| MRRP-RUK-1-20.6-75 | mini probe for use with MR3 hand rotor | 1 | |
| MRRP-RUK-1-21.0-75 | mini probe for use with MR3 hand rotor | 1 | |
| MRRP-RUK-1-21.4-75 | mini probe for use with MR3 hand rotor | 1 | |
| MRRP-RUK-1-22.2-75 | mini probe for use with MR3 hand rotor | 1 | |
| MTF 905-60-B | SURFACE PENCIL PROBE, 90 DEGREES DROP ANGLE, 50-500 KHZ FREQUENCY, CRANKED, ABSOLUTE, SHIELDED, 0.125 IN. (3.18 MM) DIAMETER, 6.00 IN. (152.4 MM) LENGTH, 30 DEGREE BENT SHAFT ANGLE (AT THE HANDLE), 0.500 IN. (12.70 MM) TIP LENGTH, (OLYMPUS OR EQUIVALENT) | 1 | |
| MVIQAP6145-A | MVIQ HANDSET WITH DUAL CONTROLLER USER INTERFACE 3 MVIQAP6145-A MENTOR VISUAL IQ QUICK CHANGE INTERCHANGE VIDEO PROBE ARTICULATING GUIDE TUBE | 1 | |
| MWUX1214A | MWUX1214 WEDGE WEDGE FOR LEADING GEAR INSPECTION 7 DEGREE FOR A1 PROBE CASING RADIUS 159MM. | 1 | |
| N1263500 | KIT OF RIGIDIZING SLEEVE FOR PROBE, OLYMPUS | 3 | |
| N4147100-BX | BORESCOPE, EXTENSIONPROBE DIAMETER: DE 6MM, PROBE LENGTH: 3500 MM, FIELD OF VIEW: 120°, FOCUS: 17 MM AT INFINITY, MAX. PROBE: 100°C; | 1 | |
| N4147200 | OLYMPUS IPLEX NX VIDEOPROBE | 1 | |
| N4149400 | EA LENS FOR PROBE, OLYMPUS, DIRECT VISION, 6 MM PROBE DIAMETER, 120° VISUAL RANGE, FOCAL DEPTH: 7 - 250 MM, INCLUDE O SEAL AND PROTECTOR CASE | 2 | |
| N4149500 | LENS FOR PROBE, OLYMPUS, DIRECT VISION, 6 MM PROBE DIAMETER, 120° VISUAL RANGE, FOCAL DEPTH: 19 - ∞ MM, INCLUDE O SEAL AND PROTECTOR CASE | 3 | |
| N4149700 | LENS FOR PROBE, OLYMPUS, LATERAL VISION, 6 MM PROBE DIAMETER, 120° VISUAL RANGE, FOCAL DEPTH: 20 - ∞ MM, INCLUDE O SEAL AND PROTECTOR CASE | 2 | |
| NDT1087-P1 | PROBE GUIDE USED WITH NDT1087 SERIES REFERENCE STANDARDS. BOEING 737 PART 6 53-30-00 and 777 PART 6 53-00-09 PAGE 9 FIGURE 3 | 3 | |
| NEC-1084 | PROBE (OLYMPUS) | 1 | |
| NEC-3109-1.120/1.240/FX | ADJUSTABLE ROTARY HOLE PROBE, 9" LENGTH, Ø1.120-Ø1.240, FLEXIBLE, 25-50KHZ, 4-PIN FISCHE | 1 | |
| NEC-3109-1.240/1.565/FX | Adjustable Hole Probe, 9" LENGTH, Ø1.240-Ø1.565, Flexible, 50-500KHz | 1 | |
| NEC-3111-1.120/1.240 | ADJUSTABLE ROTARY HOLE PROBE, Ø1.120-Ø1.240, 6" WL, 25-50KHZ, 4-PIN FISCHER | 1 | |
| NEC-4083 | LOW FREQUENCY ADJUSTABLE SLIDING PROBE, REFLECTION, 100HZ-20KHZ, MICRODOT CONNECTOR | 1 | |
| OLYMPUS IPLEX FX (4MM X 3.5M) | OLYMPUS IPLEX FX (4MM X 3.5M) - 4MM/3.5M VIDEOPROBE WITH STEREO MEASUREMENT, INTERCHANGEABLE PROBES, TEMPERATURE RESISTANCE (TO 100OC) | 1 | |
| OLYMPUS IPLEX LT 3.5M 6MM | OLYMPUS IPLEX LT 3.5M 6MM - 3.5MM/6M VIDEOPROBE, WEIGHS ONLY 2.7KG, UP TO 2 HOURS BATTERY LIFE, INTUITIVE ICON-BASED MENU SYSTEM | 1 | |
| OLYMPUS IPLEX LX 4MM 3.5M | OLYMPUS IPLEX LX 4MM 3.5M - 4MM/3.5M VIDEOPROBE WITH STEREO MEASUREMENT, 1.2 M (3.9 FT) DROP SURVIVABILITY, TIP ARTICULATION | 1 | |
| OLYMPUS IPLEX LX 6MM 3.5M | OLYMPUS IPLEX LX 6MM 3.5M - 6MM/3.5M VIDEOPROBE WITH STEREO MEASUREMENT, 1.2 M (3.9 FT) DROP SURVIVABILITY, TIP ARTICULATION | 1 | |
| OLYMPUS IPLEX NX SCOPE 4MM 3.5M | OLYMPUS IPLEX NX SCOPE 4MM 3.5M - 4MM/3.5M VIDEOPROBE WITH WIDE FIELD STEREO MEASUREMENT, TIP ARTICULATION, RUGGED AND DURABLE, DETACHABLE SCREEN | 1 | |
| OLYMPUS IPLEX TX 1.2M (2.4MM) | OLYMPUS IPLEX TX 1.2M (2.4MM) - 4MM/2M VIDEOPROBE WITH STEREO MEASUREMENT, TIP ARTICULATION, RUGGED AND DURABLE, LARGE 6.5 INCH SCREEN | 1 | |
| OLYMPUS IPLEX UL 3.5M 4MM | OLYMPUS IPLEX UL 3.5M 4MM - 3.5MM/4M VIDEOPROBE, WEIGHS ONLY 700G, UP TO 90 MINUTES BATTERY LIFE, INTUITIVE ICON-BASED MENU SYSTEM | 1 | |
| Olympus Chain Scanner | Olympus Chain Scanner - TOFD, phased array, or pulse-echo, Pipe range outside diameters: 45mm to 965mm, Spring-loaded probe holders ensure good probe contact | 1 | |
| Olympus HSMT-Flex Manual Scanner | Olympus HSMT-Flex Manual Scanner - ToFD & PA Scanner, Folding frame to optimise probe contact, Supports up to 4 probes on pipes, Supports up to 8 probes on flat surface | 1 | |
| Olympus IPLEX FX (4mm X 3.5m) | Olympus IPLEX FX (4mm X 3.5m) - 4mm/3.5m Videoprobe with Stereo Measurement, Interchangeable probes, Temperature resistance (to +100oC) | 1 | |
| Olympus IPLEX NX Scope 4mm 3.5m | Olympus IPLEX NX Scope 4mm 3.5m - 4mm/3.5m Videoprobe with wide field Stereo Measurement, Tip articulation, Rugged and durable, Detachable screen | 1 | |
| Olympus Iplex LT 3.5m 6mm | Olympus Iplex LT 3.5m 6mm - 3.5mm/6m Videoprobe, Weighs only 2.7kg, Up to 2 hours battery life, Intuitive icon-based menu system | 1 | |
| Olympus Iplex LX 4mm 3.5m | Olympus Iplex LX 4mm 3.5m - 4mm/3.5m Videoprobe with Stereo Measurement, 1.2 m (3.9 ft) drop survivability, Tip articulation | 1 | |
| Olympus Iplex LX 6mm 3.5m | Olympus Iplex LX 6mm 3.5m - 6mm/3.5m Videoprobe with Stereo Measurement, 1.2 m (3.9 ft) drop survivability, Tip articulation | 1 | |
| Olympus Iplex RT 7.5m (6mm) | Olympus Iplex RT 7.5m (6mm) - 6mm/7.5m Videoprobe, Tip articulation, Captures images and videos, Built in illumination system | 1 | |
| Olympus Iplex RX 2m (4mm) | Olympus Iplex RX 2m (4mm) - 4mm/2m Videoprobe with Stereo Measurement, Tip articulation, Rugged and durable, Large 6.5 inch screen | 1 | |
| Olympus Iplex TX 1.2m (2.4mm) | Olympus Iplex TX 1.2m (2.4mm) - 4mm/2m Videoprobe with Stereo Measurement, Tip articulation, Rugged and durable, Large 6.5 inch screen | 1 | |
| Olympus Iplex UL 3.5m 4mm | Olympus Iplex UL 3.5m 4mm - 3.5mm/4m Videoprobe, Weighs only 700g, Up to 90 minutes battery life, Intuitive icon-based menu system | 1 | |
| Olympus Omniscan MX2-PA2 16:128 | Olympus Omniscan MX2-PA2 16:128 - Multi-channel ToFD/UT & ToFD/PA – up to 8 groups simultaneously, Compatible with a range of scanners and probes, Up to 7 hours battery life | 1 | |
| Olympus Omniscan SX-PA 16:64 PR | Olympus Omniscan SX-PA 16:64 PR - Single ToFD or PA group, 33% lighter and 50% smaller than MX2 model, Compatible with a range of scanners and probes, Up to 6 hours battery life | 1 | |
| Olympus Phased Array Weld Inspection Kit | Olympus Phased Array Weld Inspection Kit - he kit contains the following items:, qty 2 A12 5L64 PA probes with 5m cable., qty 2 SA12 N55S Standard Wedge with Removable IHC Ring, qty 1 ‘Y’ Splitter 64/64, for Omniscan MX2, 5m split conduit, Irrigation Tubi | 1 | |
| Olympus RexoFORM Scanner | Olympus RexoFORM Scanner - Corrosion mapping, Can be used on pipes of different diameters with no need for multiple curved wedges, Compatible with the A12 and A14 probes | 1 | |
| Olympus ToFD (HST Lite) Scanner | Olympus ToFD (HST Lite) Scanner - ToFD scanner, Circumferential scans performed with two TOFD probes on pipes 4.5 in. (114.3 mm) OD, Light aluminium frame | 1 | |
| P5000I | PROBE (USB) | 1 | |
| P75701-4C | TOOL, FLUSHING PITOT PROBE | 13 | |
| PCON001 | PROBE, CONDUCTIVITY, 60KHZ, DIA 13.00MM, STRAIGHT, LEMO 7-WAY (AEROCHECK PLUS) | 1 | |
| PEN95-4C | 90° Surface Probe, .125"Ø x .500" Drop x 4"Long, 50-500KHz, Microdot, Customer to specify to curve angle | 1 | |
| PENFLX95-8 | FLEXIBLE COPPER SHAFT PROBE - SURFACE, 90 DEGREE, 500 KHZ FREQUENCY, NFE, ABSOLUTE, SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 8.0 IN. (203.2 MM) LONG, 0.50 IN. (12.7 MM) TIP LENGTH, (OLYMPUS OR EQUIVALENT) | 1 | |
| PEUPRTU | PEUPRTU;Advanced Expert Probe Upgrade RTU from any previous version Expert Probe | 1 | |
| PKA-27H1359 | PROBE - MUST HAVE A MICRODOT CONNECTION | 3 | |
| PKA195 | CYLINDRICAL PROBE-ABSOLUTE, FOCUSED DIAMETER PROBE = 9.5 MM (0.374 IN.) FREQUENCY RANGE 100 HZ-10 KHZ | 3 | |
| PKA27H1359 | PROBE - MUST HAVE A MICRODOT CONNECTION | 3 | |
| PLA32-16 | HAND-HELD ABSOLUTE PROBE IN CYLINDER HOUSING WITH | 1 | |
| POSITECTOR 6000 NS1 | STANDARD BODY, NON FERROUS PROBE, 0-1500UM | 2 | |
| POSITECTOR 6000 NS3 | ADVANCED BODY, NON FERROUS PROBE, 0-1500UM | 2 | |
| POSITECTOR6000-NS1 | COATING THICKNESS GAUGE (STANDARD BODY, NON FERROUS PROBE, 0-1500UM) | 2 | |
| PWA86299 | PROBE USI FAN BLADE | 1 | |
| Phoenix ISL Caliper ToFD Scanner | Phoenix ISL Caliper ToFD Scanner - ToFD Scanner, For surfaces from 3” OD and up, Fully adjustable probe centre separation (PCS) from 28mm to 160mm | 1 | |
| Q2500395 | OLYMPUS CONTOUR PROBE | 1 | |
| Q2500396 | OLYMPUS CONTOUR PROBE | 1 | |
| QC6857-2R19441 | ANNULUS FILLER PROBE NDT V2500 TOOL | 1 | |
| QCT-161-6M-DBS | E/C Radius Probe | 1 | |
| RADIUS PROBE | RADIUS PROBE SET OF 0.030, 0.020, 0.015 AND 0.005 | 1 | |
| RB211-72-C545 | ANNULUS FILLER PROBE | 1 | |
| RCSM70-4 | US PROBE–METALSCAN 70°-4 MHZ USE FOR MASTERSCAN330 | 1 | |
| RDP.6-.33/500H | RING DONUT PROBE, 500 HZ TO 20 KHZ FREQUENCY, REFLECTION ABSOLUTE, SHIELDED, 0.335 IN (8.51 MM) INTERNAL DIAMETER AND 0.600 IN (15.24 MM) EXTERNAL DIAMETER (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| RDP.6-500H-1-TI | Reflection Ring Probe, Ø.600"OD, 500Hz, Triax Connector, 1"useable height working, as Titanium. | 1 | |
| RDP.78-500H-1-TI | Reflection Ring probe, Ø.78" OD, 500Hz, Triax Connector, Reflection Triax connector, 1" useable height working, as Titanium. | 1 | |
| RDP.8-.35/2K | Reflection Ring Probe, .8" OD, .35" ID, Height 1" useable at 2K going thru AL | 1 | |
| RDP1.1/.6-500HTI | Reflection Ring Probe, Ø.600 OD, 500Hz, , 1" Useable Height Working on Titanium. | 1 | |
| RDP1.1/.78-500H-TI:RDP1.3/.78-500HTI | Reflection Ring Probe, Ø.78" OD, 500Hz, , 1" Useable Height Working on Titanium | 1 | |
| RDP1.45-.960/500H | Reflection Ring Probe, 1.45 OD, .960 ID, 1.0" Height, 100Hz-1KHz, .400 Thick AL No Radius | 1 | |
| RDP1.57-1.07/500H | Reflection Ring Probe, 1.57 OD, 1.07 ID, Height 1.0", 100Hz-1 KHz, .450 Thick AL Radius .250 | 1 | |
| RPD1.0/.5-200H | LOW FREQUENCY REFLECTION RING PROBE .500"Ø ID X 1.0"Ø OD 200HZ-3KHZ WITH A TRIAX FISCHER CONNECTOR. 737 PART 6 57-10-60, PG.2 USED WITH NDT3157. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| RR207-1 | RING DONUT PROBE, 500 HZ TO 20 KHZ FREQUENCY, REFLECTION ABSOLUTE, SHIELDED, 0.335 IN (8.51 MM) INTERNAL DIAMETER AND 0.600 IN (15.24 MM) EXTERNAL DIAMETER (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| RR30MSE | ADJUSTABLE ROTARY PROBE 30MM - 34.8MM ROTATING PROBE ( PN: SPO3564) | 1 | |
| RRFLX.240-.312/8WL | Rechii Flexible probe .240-.312, 8 WL Airbus 53-31-20PB6 100KHz - 2MHz | 1 | |
| RRX.187-.250 | Rechii Adjustable Probe, .187" to .250" 100KHz - 2MHz | 1 | |
| RRX.250-.312 | Rechii Adjustable Probe, .250" to .312" 100KHz - 2MHz | 1 | |
| RRX.312-.375 | Rechii Adjustable Probe, .312" to .375" 100KHz - 2MHz | 1 | |
| RRX.375-.437 | Rechii Adjustable Probe, .375" to .437" 100KHz - 2MHz | 1 | |
| RRX1.5-1.625 | Rechii Adjustable Probe, 1.5-1.625, 100KHz - 2MHz | 1 | |
| RRX1.625-1.750 | Rechii Adjustable Probe, 1.625-1.750, 100KHz - 2MHz | 1 | |
| RRX1.750-1.875 | Rechii Adjustable Probe, 1.750-1.875, 100KHz - 2MHz | 1 | |
| RRX1.875-2.0 | Rechii Adjustable Probe, 1.875-2.0, 100KHz - 2MHz | 1 | |
| RRX2.0-2.125 | Rechii Adjustable Probe, 2.0-2.125, 100KHz - 2MHz | 1 | |
| RRYKIT-109 | Rechhi Y-Type Adjustable, 9 RRY probes, Ø.125" to Ø.750", 100KHz-2MHz, Pelican Case | 1 | |
| RS016-5 | REFLECTION SPOT PROBE, Ø.60"OD, Ø.67" CASE, 50HZ-3KHZ, TRIAX FISCHER CONNECTOR, ALUMINUM HOUSING | 1 | |
| RS1005-2/TF | OLYMPUS REFLECTION LFEC PROBE (1KHZ~40KHZ, 0.50 INCH DIA) | 2 | |
| RS204-2/TF | REFLECTION SPOT PROBE, Ø.40" OD, 800HZ-20KHZ, TRIAX CONNECTOR, ALUMINUM HOUSING | 1 | |
| RS50/6.4 | ROTARY PROBE FOR USE WITH SR1 & SR2 | 2 | |
| RSK50/5/12/6.4/100 | ROTARY COUNTERSINK PROBE FOR USE WITH SR1 & SR2 | 1 | |
| RSM4-7-35 | OLYMPUS ROTATING PROBE (RSM4-7-35), DIAMETER OF 4.7 MM (0.185 IN) X 35 MM (1.378 IN) IN LENGTH. | 1 | |
| RSM6-3-35 | OLYMPUS ROTATING PROBE (RSM6-3-35), DIAMETER OF 6.3 MM (0.248 IN) X 35 MM (1.378 IN) IN LENGTH. | 1 | |
| RSMV/S 12-15X80 | Adjustable Rotary Probe to fit to mini r | 1 | |
| RSMV/S 8.5-10X60 | Adjustable Rotary Probe to fit to mini r | 1 | |
| RSMV/S-SL | Adjustable Flat Bottom Probe 15 - 20 mm | 1 | |
| RSMV/S-SL20-25 | Adjustable Flat Bottom Probe 20-25 mm | 1 | |
| RSMV/S-SL25-30 | Adjustable Flat Bottom Probe 25 - 30 mm | 1 | |
| RSMV/S-SL30-35 | Adjustable Flat Bottom Probe 30 - 35 mm | 1 | |
| RSMVS12-15 | SHAFT-ADJUSTABLE MINI ROTATING PROBE | 1 | |
| RSMVS20-25-110 | ROTARY PROBE SHAFT ADJUST,20-25MMX110MM | 1 | |
| S-PC-P14 | BONDMASTER OLYMPUS PITCH-CATCH PROBE | 1 | |
| S-PC-P16 | BONDMASTER OLYMPUS PITCH-CATCH PROBE | 1 | |
| S-PR-4 | PROBE (OLYMPUS) | 1 | |
| S-PR-6 | RESONANCE PROBE - OLYMPUS S-PR-6 | 1 | |
| S53305006-000 | HOUSING/HANDLING DEVICE FOR PKA 19-5 PROBE | 1 | |
| S53305006-001 | HOUSING/HANDLING DEVICE FOR PKA 19-5 PROBE | 1 | |
| SA3-N55S-IHC | CUSTOM WEDGE FOR ANGLE BEAM PHASED-ARRAY PROBE A3 55 | 1 | |
| SBM-CPM-P11 | BONDMASTER 600 CABLE, 11 PIN TO 11 PIN CABLE USED ON PITCH CATCH AND MIA PROBES | 1 | |
| SDP.40-200H-4L | REFLECTION SPOT PROBE, 0.40 INCH (10.16 MM) OD, 50HZ TO 2KHZ, 4-PIN LEMO CONNECTOR, ALUMINUM HOUSING (TECHNA NDT OR EQUIVALENT). | 1 | |
| SDP.400-1.5K | Reflection Spot Probe, 500 Hz to 60KHz using at 1.5KHz .800 height .400 width .430 | 1 | |
| SDP.60-50H-3K | REFLECTION SPOT PROBE, Ø.60"OD, Ø.67" CASE, 50HZ-3KHZ, TRIAX FISCHER CONNECTOR, ALUMINUM HOUSING | 1 | |
| SDP.98-100H | Reflection Spot Probe, Ø.984" High x .630" OD, 100-500Hz, Used with 99F57204140000 see thru .315 thick Aluminum | 1 | |
| SMARTID_PLUS_1PC | SMARTID_PLUS_1PC;SMARTID PLUS Individual Probe | 1 | |
| SONDE SR2 | RADOME TEST PROBES - AIRBUS | 1 | |
| SP01958 | PROBE OLYMPUS NDT UK LTD | 1 | |
| SP03564 | ADJUSTABLE ROTARY PROBE 30MM - 34.8MM ROTATING PROBE ( PN: SPO3564) | 1 | |
| SP3L | SONDICATOR PROBE (FOR ULTRASOUND) 1.25-IN SONDICATOR CONTACT PROBE WITH 1/2-IN SPACING REPLACEABLE TORLON PROBE TIPS, 2-PIECE PLASTIC ELEMENTS,AND ALARM INDICATING LIGHT FOR USE WITH S-21R & MIZ-21SR INSTRUMENTS. 8 FT CABLE LENGTH. (MADE BY ZETEC INC.) | 1 | |
| SPO 9565 KIT | BOLT HOLE PROBE KIT (FISCHER) VARIOUS SIZE | 1 | |
| SPO-1958 | Adjustable Sliding Probe, 100HZ-50KHZ | 1 | |
| SPO-2210 | Adjustable Sliding Probe 100-100KHz | 1 | |
| SPO-3932 | SLIDING PROBE CRACK STANDARD 2ND LAYER ALUMINUM - 1916915 -OLYMPUS | 1 | |
| SPO-5327 | OLYMPUS REFLECTION LFEC PROBE (700HZ~80KHZ, 0.31 INCH DIA) | 2 | |
| SPO-5328 | OLYMPUS REFLECTION LFEC PROBE (500HZ~60KHZ, 0.44 INCH DIA) | 2 | |
| SPO-5330 | OLYMPUS REFLECTION LFEC PROBE (100HZ~20KHZ, 0.62 INCH DIA) | 1 | |
| SPT HRY.187-.250/2WL | Adjustable Y probe for Hockingi Mini Rotor, .187-.250, 100KHz-2MHz, 4-pin Fischer 2.0"WL | 1 | |
| SPT RRY.187-.250/2WL | Adjustable Y probe for Rechii Mini Rotor, .187-.250, 100KHz-2MHz, 4-pin LEMO (2 male/2 female | 1 | |
| SPT-4032 | Surface Probe, 10mm dia, Shielded, 500Hz-1KHz, Straight Housing, 7 Pin Fischer Socket. | 1 | |
| SPT-U4040SS18-22/6WL | SPTech Dual Coil Hole Probe for Stavely Spitfire, Stainless Steel Shaft to Universal, Adjustable from 18 to 22mm OD, 6" WL, 50 to 500KHz, Diff | 1 | |
| SPT/UX/22-25M | Probe, adjustable diameter 22-25mm, X-Type | 1 | |
| SPT/UY/22-25M | Adjustable Hole Probe | 1 | |
| ST895A-3 | PROBE - RESISTIVITY MEASUREMENT, SURFACE NOTE: OPTIONAL TOOL / LOW USE TOOL - ONLY USE FOR OPTIONAL ST895A-3 TEST METHOD WHICH IS NOT CURRENTLY USED IN 737NG AMM -51-21- 71 - SEE REFERENCED BAC5639 PSD 6-14, PAGES 11 - 13 | 6 | |
| ST91172 | PROBE, EXHAUST GAS TEMPERATURE | 1 | |
| SUB-28-32 | SELF-ADJUSTING UNIVERSAL WITH BELL BACKSHELL ROTARY HOLE PROBE 0.437 IN. (11.11 MM) DIAMETER | 1 | |
| T456CFNF1S | THICKNESS PROBE FOR FERROUS AND NON-FERROUS METAL SUBSTRATES | 1 | |
| T786532 | LVDT PROBE ADJUSTMENT TOOL | 1 | |
| T827867 | Probe, Temperature, Diffuser | 1 | |
| TBL09-1.2R-6 | .090" Blade Probe, 1.2" Radius, Triax, 50-500KHz | 1 | |
| TC 5/10SF | T/R PROBE (5MHZ) TYPE: TWIN CRYSTAL, CONNECTOR TYPE: LEMO 00, CRYSTAL DIAMETER: 10 MM TWIN, NOMINAL FOCUS: 8MM MFG: POENIX PN: TC 5/10SF | 1 | |
| TE001U2158-4 | PROBE KIT USED WITH DWYER SERIES 475 MARK III MANO METER | 2 | |
| TEK-1504-4/4L | ADJUSTABLE DUAL- FREQUENCY SLIDING PROBE, 100 HZ TO 20 KHZ, 4 PINS LEMO CONNECTOR (TECHNA NDT OR EQUIVALENT) | 1 | |
| TEK-1504-5/4L | LENGTH, (TECHNA NDT OR EQUIVALENT) SLIDING PROBE WITH ADJUSTABLE STAND-OFF FOR PROTRUDING FASTENER, 100 HZ TO 20 KHZ FREQUENCY, REFLECTION, 0.594 IN. (15.09 MM) WIDTH, 1.469 IN. (37.31 MM) LENGTH, 1.125 IN. (25.58 MM) HEIGHT. (TECHNA NDT OR EQUIVALENT) | 1 | |
| TEK-1533 | Sliding Probe 1.5-5KHz, Reflection, 747 PT6 53-30-17 used on NDT1088 | 1 | |
| TEK-2015 | Airbus Surface Probe, Part 6, 57-70-00, Figure 603 | 1 | |
| TEK-2104 | Eddy Current Probe Airbus A330 57-44-04 PG1, 500Khz *ASK CUSTOMER FOR CONNECTOR INFO* | 1 | |
| TEK-2105 | Airbus Probe A330 57-54-02 PG 608 FG 603 | 1 | |
| TEK-3009-1.12/1.24 | Adjustable Hole Probe, 9" LENGTH, Ø1.120-Ø1.240, Flexible, 25-50KHz | 1 | |
| TEK-3009-1.12/1.24/200K | Adjustable Hole Probe, 9" LENGTH, Ø1.120-Ø1.240, Flexible, 200-500KHz | 1 | |
| TEK-3009-1.235/1.355 | Adjustable Hole Probe, 9" LENGTH, Ø1.235-Ø1.355, Flexible, 25-50KHz | 1 | |
| TEK-3009-1.28/1.417 | Adjustable Hole Probe, 9" LENGTH, Ø1.280-Ø1.417, Flexible, 25-50KHz | 1 | |
| TEK-3009-1.565/1.685 | Adjustable Hole Probe, 9" LENGTH, Ø1.565-Ø1.685, Flexible, 25-50KHz | 1 | |
| TEK-3009-1.565/1.685/200K | Adjustable Hole Probe, 9" LENGTH, Ø1.565-Ø1.685, Flexible, 200-500KHz | 1 | |
| TEK-3011-1.12/1.24 | Adjustable Hole Probe, Ø1.120-Ø1.240, 6" WL, 25-50KHz | 1 | |
| TEK-3011-1.12/1.24/200K | Adjustable Hole Probe, Ø1.120-Ø1.240, 6" WL, 200-500KHz | 1 | |
| TEK-3011-1.235/1.355 | Adjustable Hole Probe, Ø1.235-Ø1.355, 6" WL, 25-50KHz | 1 | |
| TEK-3011-1.235/1.355/200K | Adjustable Hole Probe, Ø1.235-Ø1.355, 6" WL, 200-500KHz | 1 | |
| TEK-3011-1.565/1.685 | Adjustable Hole Probe, Ø1.565-Ø1.685, 6" WL, 25-50KHz | 1 | |
| TEK-3011-1.565/1.685/200K | Adjustable Hole Probe, Ø1.565-Ø1.685, 6" WL, 200-500KHz | 1 | |
| TEK-3016-.73 | Adjustable Diameter Hole Probe, .730"-.790", TF Connector, 25KHz | 1 | |
| TEK-3016-.86 | Adjustable Diameter Hole Probe, .860"-.910", TF Connector, 25KHz | 1 | |
| TEK-3021 | Adjustable Diameter Hole Probe, 1.0" - 1.125", 25KHz | 1 | |
| TEK-3021-RR | Adjustable Diameter Hole Probe, 1.0" - 1.125", Rechii Connector, 25KHz | 1 | |
| TEK-3023 | Adjustable Diameter Hole Probe, 1.375" - 1.5", 25KHz | 1 | |
| TEK-3026 | Special Adjustable Manual Hole Probe, Triax Connector, Unshielded, .938" to 1.125" dia, 25kHz, 4.5" OAL | 1 | |
| TEK-3031-2.2/2.325-RA | Special Adjustable Hole Probe, 100KHz-2MHz, Rechii RA Scanner | 1 | |
| TEK-3031-2.2/2.325-U | Special Adjustable Hole Probe, 100KHz-2MHz, Universal connector | 1 | |
| TEK-3031-2.31/2.435-RA | Special Adjustable Hole Probe, 100KHz-2MHz, Rechii RA Scanner | 1 | |
| TEK-3031-2.31/2.435-U | Special Adjustable Hole Probe, 100KHz-2MHz, Universal connector | 1 | |
| TEK-3031-2.56/2.685-RA | Special Adjustable Hole Probe, 100KHz-2MHz, Rechii RA Scanner | 1 | |
| TEK-3031-2.56/2.685-U | Special Adjustable Hole Probe, 100KHz-2MHz, Universal connector | 1 | |
| TEK-3100 | Countersink Probe 3.6-4.8mm, Airbus Type per A380 FIG1 51-62-03-991-001-A | 1 | |
| TEK-3100-1 | Countersink Probe 4.8-8mm, Airbus Type per A380 FIG1 51-62-03-991-001-A | 1 | |
| TEK-3100-2 | Countersink Probe 7.5-9.5mm, Airbus Type per A380 FIG1 51-62-03-991-001-A | 1 | |
| TEK-3100-3 | Countersink Probe 9-11.1mm, Airbus Type per A380 FIG1 51-62-03-991-001-A | 1 | |
| TEK-3100-4 | Countersink Probe 11-12.7mm, Airbus Type per A380 FIG1 51-62-03-991-001-A | 1 | |
| TEK-3100-5 | Countersink Probe 12.5-14.3mm, Airbus Type per A380 FIG1 51-62-03-991-001-A | 1 | |
| TEK-3103 | spring drive probe with guide Handel .500" dia by .750" WL Universal Connectors USE BELLOS FOR SPRING | 1 | |
| TEK-4027 | CYLINDRICAL PROBE-ABSOLUTE, FOCUSED DIAMETER PROBE = 9.5 MM (0.374 IN.) FREQUENCY RANGE 100 HZ-10 KHZ | 1 | |
| TEK-4042 | Sliding Probe 40Hz-50KHz, Reflection, 747 PT6 53-30-17 used on NDT1088 | 1 | |
| TEK-4074 | LF Sliding Probe, Reflection, 100Hz-40kHz, Aluminum Housing, 4pin Fischer, A330, 53-21-56 | 1 | |
| TEK-4075 | LF Spot Probe, Reflection, 20Hz-10kHz, 39mm diameter, 30mm active areaAnodized Aluminum Housing, 4pin Fischer | 1 | |
| TEK-4084 | Probe, Rohmann Type, 4-pin Fischer, Bridge, Radius Probe A320 PT6 28-28-03 PG 616 FIG 603 *Same probe as TEK-4085* | 1 | |
| TEK-4085 | Probe, Rohmann Type, 4-pin Fischer, Bridge, Radius Probe A320 PT6 28-28-03 PG 616 FIG 603 | 1 | |
| TEK-5158 | Probe Wedge, 33deg, 80mm radius, per A330, 53-51-09 *DO NOT USE* TCW-33A-80R is the correct part number | 1 | |
| TEK-KD 29-H 1124-4L | Bridge Spot Probe 100Khz-1.5 Mhz, Stainless Steel Housing, 4 pin Lemo Connector | 1 | |
| TMH.156SE | PROBE OLYMPUS 156 | 1 | |
| TMH.187SE | PROBE OLYMPUS 187 | 1 | |
| TMH.250SE | PROBE OLYMPUS 250 | 1 | |
| TMH.312SE | PROBE OLYMPUS 312 | 1 | |
| TMHX.625-.750 | Adjustable Manual X Hole Probe, .625" - .750", 50-500KHz, Triax Connector | 1 | |
| TMHXD.187-.250/500K | Adjustable Manual X Hole Probe, .187" - .250", 500KHz, Triax connector | 1 | |
| TMHXD.250-.312/500K | Adjustable Manual X Hole Probe, .250" - .312", 500KHz, Triax connector | 1 | |
| TMHXD.312-.375/500K | Adjustable Manual X Hole Probe, .312" - .375", 500KHz, Triax connector | 1 | |
| TPEN94-6/2M | PROBE NONFERROUS PENCIL FOR LOCATOR TYPE UH NEW P/N | 1 | |
| TPEN95-6/100-500K | EDDY CURRENT PROBE OLYMPUS P/100KHZ-500KHZ/A/905/6 | 1 | |
| TPEN95-6B | SURFACE PENCIL PROBE, 90 DEGREES DROP ANGLE, 50-500 KHZ FREQUENCY, CRANKED, ABSOLUTE, SHIELDED, 0.125 IN. (3.18 MM) DIAMETER, 6.00 IN. (152.4 MM) LENGTH, 30 DEGREE BENT SHAFT ANGLE (AT THE HANDLE), 0.500 IN. (12.70 MM) TIP LENGTH, (OLYMPUS OR EQUIVALENT) | 1 | |
| TSPEN90-3 | .072" 90° Surface Probe, 50-500KHZ, Flush at probe tip, 3" Long Triax Connector | 1 | |
| U8503143 | TGB BEVEL GEAR - OLYMPUS TEST PROBE /ULTRA SO | 1 | |
| U8600488 | SELF-ADJUSTING UNIVERSAL WITH BELL BACKSHELL ROTARY HOLE PROBE 0.437 IN. (11.11 MM) DIAMETER | 1 | |
| U8610626 | MP.90.045-60BL SURFACE PROBE OLYMPUS | 1 | |
| U8629180 | PROBE ADJUSTABLE (2-SINGLE PIN MICRODOT) | 1 | |
| U8770335 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 | |
| U8770417 | PROBE HOUSING | 1 | |
| U8770472 | PROBE HOUSING | 1 | |
| U8800058 | BONDMASTER CABLE - SBM-CPM-P11 11 PIN TO 11 PIN CABLE USED ON PITCH CATCH AND MIA PROBES | 1 | |
| UR.125SS/1.1WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.125 INCH (3.18MM) DIAMETER, 1.1 INCH (2.79CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| UR.187SS/1.1WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.187 INCH (4.75MM) DIAMETER, 1.1 INCH (2.79CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| UR.250SS/2WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.250 INCH (6.35MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| UR.312SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.312 INCH (7.92MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| UR.375SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.375 INCH (9.53MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| UR.500SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.500 INCH (12.7MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| URX.187-.250/2WL | SCANNER PROBE ADJUSTABLE X TYPE, 4.7 MM - 6.5 MM (0.187 IN. - 0.250 IN.), WORKING LENGTH 50.8 MM (2.00 IN.) | 1 | |
| URY 10-11.5M | Universal Hole Probe, Adjustable Diameter, Ø10-11.5mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 10-12M | Universal Hole Probe, Adjustable Diameter, Ø10-12mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 11-13M | Universal Hole Probe, Adjustable Diameter, Ø11-13mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 11-13M/SS | Universal Hole Probe, Adjustable Diameter, Ø11-13mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 11-13M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø11-13mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL, Unshielded | 1 | |
| URY 11-13M/U | Universal Hole Probe, Adjustable Diameter, Ø11-13mm x 50mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 11.5-13M | Universal Hole Probe, Adjustable Diameter, Ø11.5-13mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 12-15M | Universal Hole Probe, Adjustable Diameter, Ø12-15mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 13-14.5M | Universal Hole Probe, Adjustable Diameter, Ø13-14.5mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 13-14.5M/SS | Universal Hole Probe, Adjustable Diameter, Ø13-14.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 13-14.5M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø13-14.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL Unshielded | 1 | |
| URY 13-16M | Universal Hole Probe, Adjustable Diameter, Ø13-16mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 13-16M/SS | Universal Hole Probe, Adjustable Diameter, Ø13-16mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL *Won't spread this far, use two probes 13mm-14.5mm & 14.5mm-16mm | 1 | |
| URY 13-16M/U | Universal Hole Probe, Adjustable Diameter, Ø13-16mm x 50mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 14.5-16M | Universal Hole Probe, Adjustable Diameter, Ø14.5-16mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 14.5-16M/SS | Universal Hole Probe, Adjustable Diameter, Ø14.5-16mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 14.5-16M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø14.5-16mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL Unshielded | 1 | |
| URY 15-18M | Universal Hole Probe, Adjustable Diameter, Ø15-18mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 16-17.5M/SS | Universal Hole Probe, Adjustable Diameter, Ø16-17.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 16-18M | Universal Hole Probe, Adjustable Diameter, Ø16-18mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 16-19M | Universal Hole Probe, Adjustable Diameter, Ø16-19mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 16-19M/U | Universal Hole Probe, Adjustable Diameter, Ø16-19mm x 50mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 17.5-19M/SS | Universal Hole Probe, Adjustable Diameter, Ø17.5-19mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 18-20M | Universal Hole Probe, Adjustable Diameter, Ø18-20mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 18-21M | Universal Hole Probe, Adjustable Diameter, Ø18-21mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 19-20.5M/SS | Universal Hole Probe, Adjustable Diameter, Ø19-20.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 19-22M | Universal Hole Probe, Adjustable Diameter, Ø19-22mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 19-22M/SS | Universal Hole Probe, Adjustable Diameter, Ø19-22mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL *Won't spread this far, use two probes 19mm-20.5mm & 20.5mm-22mm | 1 | |
| URY 19-22M/U | Universal Hole Probe, Adjustable Diameter, Ø19-22mm x 50mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 19-27M | Universal Hole Probe, Adjustable Diameter, Ø19-27mm x 50mm WL, 100KHz-2MHz *Do Not Use* Use URY 19-22M, URY 22-25, URY 25-28M | 1 | |
| URY 20-23M | Universal Hole Probe, Adjustable Diameter, Ø20-23mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 20-25M/110WL | ROTARY PROBE SHAFT ADJUST,20-25MMX110MM | 1 | |
| URY 20.5-22M/SS | Universal Hole Probe, Adjustable Diameter, Ø20.5-22mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 21-24M | Universal Hole Probe, Adjustable Diameter, Ø21-24mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 22-23.5M/SS | Universal Hole Probe, Adjustable Diameter, Ø22-23.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 22-25M | Universal Hole Probe, Adjustable Diameter, Ø22-25mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 22-25M/SS | Universal Hole Probe, Adjustable Diameter, Ø22-25mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL *Won't spread this far, use two probes 22mm-23.5mm & 23.5mm-25mm | 1 | |
| URY 22-25M/U | Universal Hole Probe, Adjustable Diameter, Ø22-25mm x 50mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 23-26M | Universal Hole Probe, Adjustable Diameter, Ø23-26mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 23.5-25M/SS | Universal Hole Probe, Adjustable Diameter, Ø23.5-25mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 25-26.5M/SS | Universal Hole Probe, Adjustable Diameter, Ø25-26.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 25-28M | Universal Hole Probe, Adjustable Diameter, Ø25-28mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 25-28M/U | Universal Hole Probe, Adjustable Diameter, Ø25-28mm x 50mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 26-29M | Universal Hole Probe, Adjustable Diameter, Ø26-29mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 26.5-28M/SS | Universal Hole Probe, Adjustable Diameter, Ø26.5-28mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 28-30M/SS | Universal Hole Probe, Adjustable Diameter, Ø28-30mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 29-31M | Universal Hole Probe, Adjustable Diameter, Ø29-31mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 3-4M | Universal Hole Probe, Adjustable Diameter, Ø3.0-4.0mm x 38mm WL, 100KHz-2MHz | 1 | |
| URY 3-4M/90WL | Universal Hole Probe, Adjustable Diameter, Ø3.0-4.0mm x 90mm WL, 100KHz-2MHz | 1 | |
| URY 3-4M/SS | Universal Hole Probe, Adjustable Diameter, Ø3.0-4.0mm x 38mm WL, 100KHz-2MHz Stainless Steel | 1 | |
| URY 3-4M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø3.0-4.0mm x 38mm WL, 100KHz-2MHz Stainless Steel Unshielded | 1 | |
| URY 3-4M/U | Universal Hole Probe, Adjustable Diameter, Ø3.0-4.0mm x 38mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 30-32M/SS | Universal Hole Probe, Adjustable Diameter, Ø30-32mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 32-33M/SS | Universal Hole Probe, Adjustable Diameter, Ø32-33mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 33.5-35M/SS | Universal Hole Probe, Adjustable Diameter, Ø33.5-35mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 4-5M | Universal Hole Probe, Adjustable Diameter, Ø4.0-5.0mm x 38mm WL, 100KHz-2MHz | 1 | |
| URY 4-5M/90WL | Universal Hole Probe, Adjustable Diameter, Ø4.0-5.0mm x 90mm WL, 100KHz-2MHz | 1 | |
| URY 4-5M/SS | Universal Hole Probe, Adjustable Diameter, Ø4.0-5.0mm x 38mm WL, 100KHz-2MHz stainless steel | 1 | |
| URY 4-5M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø4.0-5.0mm x 38mm WL, 100KHz-2MHz stainless steel, Unshielded | 1 | |
| URY 4-5M/U | Universal Hole Probe, Adjustable Diameter, Ø4.0-5.0mm x 38mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 5-6.5M | Universal Hole Probe, Adjustable Diameter, Ø5.0-6.5mm x 38mm WL, 100KHz-2MHz | 1 | |
| URY 5-6.5M/SS | Universal Hole Probe, Adjustable Diameter, Ø5.0-6.5mm x 38mm WL, 100KHz-2MHz Stainless Steel | 1 | |
| URY 5-6.5M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø5.0-6.5mm x 38mm WL, 100KHz-2MHz Stainless Steel, Unshielded | 1 | |
| URY 5-6.5M/U | Universal Hole Probe, Adjustable Diameter, Ø5.0-6.5mm x 38mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 5-6M | Universal Hole Probe, Adjustable Diameter, 5.0-6mm x 38mm WL, 100khz-2mhz | 1 | |
| URY 6-7M | Universal Hole Probe, Adjustable Diameter, Ø6-7mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 6-8M | Universal Hole Probe, Adjustable Diameter, Ø6-8mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 6.5-8M | Universal Hole Probe, Adjustable Diameter, Ø6.5-8mm x 38mm WL, 100KHz-2MHz | 1 | |
| URY 6.5-8M/SS | Universal Hole Probe, Adjustable Diameter, Ø6.5-8mm x 38mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 6.5-8M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø6.5-8mm x 38mm WL, 100KHz-2MHz STAINLESS STEEL, Unshielded | 1 | |
| URY 6.5-8M/U | Universal Hole Probe, Adjustable Diameter, Ø6.5-8mm x 38mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 7-8M | Universal Hole Probe, Adjustable Diameter, Ø7-8mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 8-9.5M | Universal Hole Probe, Adjustable Diameter, Ø8-9.5mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 8-9.5M/SS | Universal Hole Probe, Adjustable Diameter, Ø8-9.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 8-9.5M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø8-9.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL, Unshielded | 1 | |
| URY 8-9.5M/U | Universal Hole Probe, Adjustable Diameter, Ø8-9.5mm x 50mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 8-9M | Universal Hole Probe, Adjustable Diameter, Ø8-9mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 9-10M | Universal Hole Probe, Adjustable Diameter, Ø9-10mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 9.5-11M | Universal Hole Probe, Adjustable Diameter, Ø9.5-11mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 9.5-11M/SS | Universal Hole Probe, Adjustable Diameter, Ø9.5-11mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 9.5-11M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø9.5-11mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL Unshielded | 1 | |
| URY 9.5-11M/U | Universal Hole Probe, Adjustable Diameter, Ø9.5-11mm x 50mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY-.250-.312/1.5WL/A | Probe made to customer Spec. | 1 | |
| URY.156-.187 | ROTARY BOLT-HOLE PROBE, ADJUSTABLE FROM 0.156 IN (3.96 MM) TO 0.187 IN (4.75 MM) DIAMETER, 100 KHZ-2 MHZ FREQUENCY RANGE, DIFFERENTIAL, SHIELDED, PLASTIC ROTATING BOLT-HOLE PROBE (TECHNANDT OR EQUIVALENT) | 1 | |
| URY.250-.312 | NDT ADJUSTABLE ROTOPROBE | 1 | |
| URY.312-.375 | PROBE, ROTARY BOLT-HOLE, ADJUSTABLE FROM 0.312 IN. (7.92 MM) TO 0.375 IN. (9.52 MM) DIAMETER, 100 KHZ TO 2.0 MHZ FREQUENCY RANGE, DIFFERENTIAL, SHIELDED, PLASTIC ROTATING BOLTHOLE PROBE (TECHNA NDT OR EQUIVALENT) | 1 | |
| URY.325-.437 | Unirotor (universal) Y probe .325-.437 Customized probe 100KHz-2MHZ | 1 | |
| URY.500-.625SS | Unirotor (Universal) Y Probe, 1/2"-9/16" Diameter, 100KHz-2MHz, Stainless Steel *won't spread this far, use two probes .500-.562 & .562-.625 | 1 | |
| URY.625-.750 | UNIROTOR ADJUSTABLE DIAMETER PROBE | 1 | |
| URY.625-.750SS | Unirotor (Universal) Y Probe, .625"-.750" Diameter, 1-2MHZ, Stainless Steel *won't spread this far, use two probes .625-.687 & .687-.750 | 1 | |
| URY.750-.875 | UNIROTOR ADJUSTABLE DIAMETER PROBE | 1 | |
| URY.875-1.0 | UNIROTOR ADJUSTABLE DIAMETER PROBE | 1 | |
| URY1.0-1.125SS | Unirotor (Universal) Y Probe, 1.0"-1.125" Diameter, 100KHz to 2MHz Stainless Steel *Spread Won't Work, Use 1.0-1.062SS & 1.062-1.125SS* | 1 | |
| URYFB 11-13M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø11-13mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 13-14.5M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø13-14.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 14.5-16M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø14.5-16mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 16-17.5M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø16-17.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 17.5-19M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø17.5-19mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 19-20.5M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø19-20.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 20.5-22M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø20.5-22mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 22-23.5M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø22-23.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 23.5-25M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø23.5-25mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 3-4M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø3.0-4.0mm x 38mm WL, 100KHz-2MHz Stainless Steel | 1 | |
| URYFB 4-5M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø4.0-5.0mm x 38mm WL, 100KHz-2MHz stainless steel | 1 | |
| URYFB 5-6.5M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø5.0-6.5mm x 38mm WL, 100KHz-2MHz Stainless Steel | 1 | |
| URYFB 6.5-8M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø6.5-8mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 8-9.5M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø8-9.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 9.5-11M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø9.5-11mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB0.375-0.437 | Probe Flat bottom addjust 0.375-0.437 | 1 | |
| URYFB0.437-0.500 | Probe Flat bottom addjust 0.437-0.500 | 1 | |
| URYFB0.500-0.562 | Probe Flat bottom addjust 0.500-0.562 | 1 | |
| URYFB0.562-0.625 | Probe Flat bottom addjust 0.562-0.625 | 1 | |
| URYKIT-107 | Unirotor Kit Y-Type Adjustable, 7 URY probes, Ø.125" to Ø.500", 100KHz-2MHz, Pelican Case | 1 | |
| URYKIT-109 | Unirotor Kit Y-Type Adjustable, 9 URY probes,URY.125-.156, ..156-.187, .187-.250, .250-.312, .312-.375, .375-.437, .437-.500, .500-.625, .625-.750, 100KHz-2MHz, Pelican Case | 1 | |
| URYKIT-110 | Unirotor Kit Y-Type Adjustable, 9 URY probes, Ø.125" to Ø.875", 100KHz-2MHz | 1 | |
| UR_156 | BOLT-HOLE PROBE - 100 KHZ-2.0 MHZ FREQUENCY, SHIELDED, 0.156 IN. (3.96 MM) DIAMETER (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| VM202RA-1/2X6 | PROBE (OLYMPUS) | 1 | |
| VM202RA-1/4X5 | PROBE (OLYMPUS) | 1 | |
| WS 100 | PROBE SHOE FOR 0.10 INCH (2.5 MM) RADIUS PARTS | 1 | |
| WS 150 | PROBE SHOE FOR 0.15 INCH (3.8 MM) RADIUS PARTS | 1 | |
| XBD400-50013-013 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| Y102 | ACOUSTIC EMIISION PROBE NO:2 | 2 | |
| ZRAY.156-.187 | Adjustable Probe, Y Type, .156"-.187", Absolute 50-500KHZ | 1 | |
| ZRAY.187-.250 | Adjustable Probe, Y Type, .187"-.250", Absolute 50-500KHZ | 1 | |
| ZRAY.250-.312 | Adjustable Probe, Y Type, .250"-.312", Absolute 50-500KHZ | 1 | |
| ZRDX.250-.312 | Adjustable Probe, X Type, .250"-.312", Differential 500KHZ | 1 | |
| ZRDY.156-.187SS | Adjustable probe, Y type, .156-.187, Didderential, Stainless Steel | 1 | |
| ZRDY.187-.250 | Adjustable Probe, Y Type, .187"-.250", Differential 500KHZ | 1 | |
| ZRDY.187-.250SS | Adjustable Probe, Y type, .187-.250, differential, Stainless Steel | 1 | |
| ZRDY.250-.312 | Adjustable Probe, Y Type, .250"-.312", Differential 500KHZ | 1 | |
| ZRDY.250-.312SS | Adjustable Probe, Y type, .250-.312, differential, Stainless Steel | 1 | |
| ZRDY.312-.375 | Adjustable, Probe, Y Type, .312"-.375", Differential 500KHZ | 1 | |
| ZRDY.312-.375SS | Adjustable Probe, Y type, .312-.375 differential, Stainless Steel | 1 | |
| ZRDY.375-.437 | Adjustable Probe, Y type, .375-.437, differential | 1 | |
| ZRDY.375-.437SS | Adjustable Probe, Y type, .375-.437, differential, Stainless Steel | 1 | |
| ZRDY.437-.500SS | Adjustable Probe, Y type, .437-.500, differential, Stainless Steel | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
