| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 3SF3869 | THRUST REVERSER LOCK | 1 | |
| B78001-1 | THRUST REVERSER LOCK | 7 | |
| B78001-14 | Thrust Reverser Lock | 3 | |
| B78001-2 | THRUST REVERSER LOCK | 8 | |
| C78006-1 | THRUST REVERSER LOCK | 22 | |
| C78006-2 | THRUST REVERSER LOCK | 1 | |
| C78023-1 | THRUST REVERSER LOCK | 14 | |
| C80006-1 | THRUST REVERSER LOCK | 1 | |
| C8006-1 | THRUST REVERSER LOCK | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| ACS87021 | KIT − THRUST REVERSER LOCK−OUT | 2 | |
| (CALIB) B78009-26 | THRUST REVERSER LOCKING (CALIBRATION) | 2084 | |
| (CALIB)B78009-26 | THRUST REVERSER LOCKING (CALIBRATION) | 2084 | |
| -- | ACTUATOR LOCK ASSY-THRUST REVERSERACTUATOR CFM56-3 | 2084 | |
| 04Y0008-001 | TOOL-THRUST REVERSER PRIMARY LOCK DISENGAGEMENT | 4 | |
| 06ND78119-1 | LOCKOUT FITTING TO HOLD THRUST REVERSER IN STOWED POSITION | 1 | |
| 06ND78120-1 OR -7 | DEPLOY BLOCK TO HOLD THRUST REVERSER IN DEPLOYED | 1 | |
| 06ND78120-9 | DEPLOY BLOCK TO HOLD THRUST REVERSER IN DEPLOYED POSITION | 1 | |
| 08ND78430-3 | THRUST REVERSER DEPLOY BLOCK ASSY | 2084 | |
| 1159GSE111-1 | THRUST REVERSER GROUND LOCK | 2084 | |
| 1159GSE111-31 | THRUST REVERSER GROUND LOCK | 1 | |
| 1159GSE40219-1 | THRUST REVERSER GROUND LOCK | 2084 | |
| 1159GSE40219-3 | THRUST REVERSER GROUND LOCK | 2084 | |
| 13E163-01-0P | THRUST REVERSER LOCK ASSEMBLY - STOW | 1 | |
| 202-0053-501 | THRUST REVERSER LOCK OUT TOOL | 2084 | |
| 22H-CX7830501-11 | THRUST REVERSER BLOCK PIN | 1 | |
| 22H-CX7830501-13 | THRUST REVERSER MAINT BLOCK | 1 | |
| 266-0010-501 | THRUST REVERSER LOCKOUT DEVICE | 1 | |
| 2ME65B98300 | TURNBUCKLE - RIGGING AND LOCKOUT, TURBINE THRUST REVERSER | 1 | |
| 2MIT65B98000 | SECURING CLIP SET - BLOCKER DOOR DEACTIVATED TURBINE THRUST REVERSER | 1 | |
| 2MITRD00103012 | THRUST REVERSER PRIMARY LOCK HOLD OPEN TOOL | 2084 | |
| 2MITRD00103012-GSE | THRUST REVERSER PRIMARY LOCK HOLD OPEN TOOL | 2084 | |
| 315A2258-2 | LOCKPIN - EQUIPMENT, THRUST REVERSER ACTUATION MODULE LOCKOUT | 3 | |
| 347-3001-116SE | THRUSTREVERSER UNLOCK PINS | 1 | |
| 347-3001-11GSE | PINS, LOCKOUT-THRUST REVERSER | 1 | |
| 351-3000-11GSE | THRUST REVERSER C-DUCT STEP BLOCKS | 1 | |
| 3ME65B98300 | TURNBUCKLE - RIGGING AND LOCKOUT, TURBINE THRUST REVERSER | 1 | |
| 4576101005-005 | THRUST REVERSER LOCKOUT | 1 | |
| 53ND-78166-1 | LOCK OUT THRUST REVERSER TOOL (530A AND 535A ENGINES) | 1 | |
| 5837827-1 | STRUT,LOCK-THRUST REVERSER ACTUATOR | 3 | |
| 636-3000-28GSE | THRUST REVERSER ACTUATOR PRIMARY LOCK PIN | 2 | |
| 636-3000_28GSE | THRUST REVERSER LOCKING PIN | 2 | |
| 737/JT8 | 737/JT8 THRUST REVERSER LOCKOUT | 1 | |
| 78009-5 | THRUST REVERSER MAINTENANCE LOCK EQUIPMENT | 1 | |
| 90600F71115001000 | Thrust reverser locking flag | 1 | |
| 98D7830H028-000 | PIN-THRUST REVERSER ICU LOCK OUT | 1 | |
| 9912546-1 | LOCK OUT THRUST REVERSER TOOL (530A AND 535A ENGINES) | 1 | |
| 999-3001-11GSE | THRUST REVERSER UNLOCK PIN FOR MANUAL TRANSLATION | 1 | |
| 999-3477-3 | THRUST REVERSER (TR) LOCKOUT PINS | 1 | |
| A78015-1 | REWORK JIG - HINGE, BLOCKER DOORS, THRUST REVERSER (PRATT AND WHITNEY) | 1 | |
| A78023-121 | BLOCK SUPPORT SET - PW4000 THRUST REVERSER | 2084 | |
| AB78001-LG1 | LOCKOUT PIN - THRUST REVERSER | 1 | |
| AB78001-LG2 | LOCKOUT PIN - THRUST REVERSER | 1 | |
| AB78001-LG3 | SET OF LOCKOUT PINS - THRUST REVERSER | 1 | |
| ACS87021 | Kit − Thrust Reverser Lock−out | 2 | |
| ACS87021-301 | KIT, LOCK OUT THRUST REVERSER | 2 | |
| ACS87021−301 | Kit − Thrust Reverser Lock−out | 2 | |
| ACS87022 | Lock−out Pin − Thrust Reverser Actuator (60 mm) | 2 | |
| ACS87023 | THRUST REVERSER COWL LOCK LOCK-OUT PIN ASSEMBLY | 1 | |
| ACS87023-201 | PIN, LOCK-OUT-THRUST REVERSER ACTUATOR | 4 | |
| ACS87023−201 | Lock−out Pin − Thrust Reverser Actuator (5 in.) | 4 | |
| AE1N20010 | LOCKOUT PIN - THRUST REVERSER | 1 | |
| AT-092776 | THRUST REVERSER LOCKING SYSTEM OPS CHECKS AMM 78-32-00-710-801 -A (AND MANUAL EXTENTION/RETRACTIONS CHECKS) | 2 | |
| B71020-75 | LOCK HOLD OPEN THRUST REVERSER | 2 | |
| B78001 | LOCK THRUST REVERSER ISOLATION VALVE | 1 | |
| B78001-1 | LOCK - THRUST REVERSER ISOLATION VALVE (GROUND, FLYAWAY AND DISPATCH) | 7 | |
| B78001-14 | LOCK - THRUST REVERSER ISOLATION VALVE (GROUND AND FLYAWAY) | 3 | |
| B78001-2 | LOCK - THRUST REVERSER ISOLATION VALVE (GROUND, FLYAWAY AND DISPATCH) | 8 | |
| B78001-24 | LOCK - THRUST REVERSER ISOLATION VALVE (GROUND, FLYAWAY AND DISPATCH) | 2 | |
| B78001-24 | LOCK - THRUST REVERSER | 2 | |
| B78001-43 | LOCK - THRUST REVERSER ISOLATION VALVE (GROUND, FLYAWAY AND DISPATCH) | 1 | |
| B78001-5 | LOCK - THRUST REVERSER ISOLATION VALVE (GROUND AND FLYAWAY) | 1 | |
| B78001-8 | LOCK - THRUST REVERSER ISOLATION VALVE (GROUND AND FLYAWAY) | 3 | |
| B78008-19 | TEST FIXTURE - ROD END AND STROKE STOP, LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR | 3 | |
| B78009-21 | Lock Equipment - Thrust Reverser Maintenance | 6 | |
| B78009-26 | Lock Equipment - Thrust Reverser Maintenance | 13 | |
| B78010-28 | Stand - Functional Test Equipment, Locking and Non-Locking Thrust Reverser Actuator | 3 | |
| B78010-9 | Stand - Functional Test Equipment, Locking and Non-Locking Thrust Reverser Actuator | 2 | |
| B78011-1 | Torque Fixture - Locking and Non-Locking Thrust Reverser Actuator | 1 | |
| B78011-25 | TORQUE FIXTURE - LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR ASSEMBLY | 2 | |
| B78013-1 | Overhaul Equipment - Thrust Reverser Locking Actuator Assembly | 3 | |
| B78013-2 | OVERHAUL EQUIPMENT - THRUST REVERSER LOCKING ACTUATOR ASSEMBLY | 1 | |
| B78014-1 | Test Fixture - Locking and Non-Locking Thrust Reverser Actuator | 1 | |
| B78014-29 | Test Fixture - Rod End and Stroke Stop, Locking and Non-locking Thrust Reverser Actuator | 2 | |
| B78014-37 | Test Fixture - Rod End and Stroke Stop, Locking and Non-locking Thrust Reverser Actuator | 2 | |
| B78015-17 | Overhaul Set - Thrust Reverser Locking Actuator Assembly | 1 | |
| B78015-23 | Overhaul Set - Thrust Reverser Locking Actuator Assembly | 3 | |
| B78015-39 | OVERHAUL SET - THRUST REVERSER LOCKING ACTUATOR ASSEMBLY | 2 | |
| B78016-1 | Overhaul Set - Thrust Reverser Locking and Non-Locking Actuator Assembly | 3 | |
| B78016-13 | Overhaul Set - Thrust Reverser Locking and Non-Locking Actuator Assembly | 1 | |
| B78017-1 | Installation Equipment - Bearing - Lead Screw, Thrust Reverser Non-Locking Actuator Assembly | 4 | |
| B78020¬1 | RETAINING PIN SET ¬ THRUST REVERSER (SYNC¬LOCK) ¬ RB211¬535E4 | 2084 | |
| C-78023-1 | B737 NG THRUST REVERSER ACTUATOR LOCK | 2084 | |
| C78004 | LOCKPIN EQPT-THRUST REVERSER TRANSLATING SLEEVE,CFM56-3ENG | 1 | |
| C78004-1 | Lockpin Equipment - Thrust Reverser Actuation Module Lockout | 16 | |
| C78004-2 | THRUST REVERSER LOCK EQPT. | 15 | |
| C78006 | ACTUATOR LOCK ASSY THRUST REVERSER ACTUATOR CFM56-3 | 1 | |
| C78006-1 | TOOL - THRUST REVERSER ACTUATOR LOCK | 22 | |
| C78006-2 | THRUST REVERSER ACTUATOR LOCK | 1 | |
| C78023 | LOCK ASSY THRUST REVERSER ACTUATOR CFM56-7 | 1 | |
| C78023-1 | Lock Assembly - Thrust Reverser Actuator, CFM56-7 | 14 | |
| C78023-1 | LOCK THRUST REVERSER ACTUATOR | 14 | |
| C78023-13 | LOCK ASSEMBLY - THRUST REVERSER ACTUATOR, CFM56-7 | 1 | |
| C78023-1 | ASSEMBLY – LOCK , THRUST REVERSER ACTUATOR , CFM56-7 ( CONTAINS 2 LOCKS ) | 14 | |
| C78023-2 | COLLAR ASSY - LOCKING THRUST REVERSER ACTUATOR | 6 | |
| C78027-1 | Torque Fixture - Locking and Non-Locking Thrust Reverser Actuator Assembly | 3 | |
| C78030-1 | Gap Measurement Gauge - Thrust Reverser Actuator System Locking Actuator | 4 | |
| C78030-10 | Gap Measurement Gauge - Thrust Reverser Actuator System Locking Actuator | 1 | |
| C78030-18 | GAP MEASUREMENT GAUGE - THRUST REVERSER ACTUATOR SYSTEM LOCKING ACTUATOR | 1 | |
| C78035-1 | LOCK EQUIPMENT - THRUST REVERSER OPENING ACTUATORS, CFM LEAP-1B ENGINE (CE) | 1 | |
| C78035-14 | LOCK EQUIPMENT - THRUST REVERSER OPENING ACTUATORS, CFM LEAP-1B ENGINE (CE) | 1 | |
| C78035-1 | LOCK - THRUST REVERSER OPENING ACTUATOR, FULLY EXTENDED, LEAP-1B | 2084 | |
| C78035-2 | LOCK EQUIPMENT - THRUST REVERSER OPENING ACTUATORS, CFM LEAP-1B ENGINE | 1 | |
| C78035-3 | LOCK EQUIPMENT - THRUST REVERSER OPENING ACTUATORS, CFM LEAP-1B ENGINE | 1 | |
| C78040-1 | DRIVE SOCKET – THRUST REVERSER SYNC LOCK, MANUAL DRIVE | 1 | |
| C78040-10 | DRIVE SOCKET - THRUST REVERSER SYNC LOCK, MANUAL DR | 1 | |
| C78040-11 | DRIVE SOCKET - THRUST REVERSER SYNC LOCK, MANUAL DR | 1 | |
| C78041-1 | GUIDE PIN - LOCKSLEEVE, THRUST REVERSER ACTUATOR | 1 | |
| C78042-17 | GAUGE - FREE PLAY CHECK, THRUST REVERSER LOCKING ACTUATOR | 1 | |
| C78042-23 | FREE PLAY CHECK, THRUST REVERSER (TR) LOCKING ACTUATOR | 1 | |
| CH2091A0004-1 | BLANKET, THRUST REVERSER BLOCKER DOOR | 2084 | |
| CH78/0001 | THRUST REVERSER LOCK CFM56-5 | 1 | |
| DZZ7900-1 | THRUST REVERSER ACTUATOR LOCK | 1 | |
| F10A5B20236-5 | THRUST REVERSER (STOWED) LOCK PIN | 2084 | |
| F10A5C20236-1 | THRUST REVERSER (DEPLOYED) LOCK PIN | 2084 | |
| F2MA581800-13 | SAFETY BLOCKS TO HOLD THRUST REVERSER IN DEPLOYED POSITION | 1 | |
| F2MA581800047 | THRUST REVERSER DEPLOY BLOCK | 1 | |
| F2MB912100-3 | LOCKOUT PIN TO HOLD THRUST REVERSER IN STOWED POSITION | 1 | |
| F80109-3 | LOCK -0 THRUST REVERSER ISOLATION VALVE | 9 | |
| F80109-3 -9 | Lock Assembly -Thrust Reverser Isolation Valve | 1 | |
| F80109-9 | Lock Assy - Thrust Reverser Isolation Valve | 2 | |
| G601-780013-1 | THRUST REVERSER SLIDER BLOCKTING TOOL | 1 | |
| G78009 | GAUGE - WEAR MEASUREMENT, THRUST REVERSER BLOCKER DOOR | 1 | |
| G78009-1 | Gauge - Wear Measurement, Thrust Reverser Blocker Door | 2 | |
| G78009-35 | GAUGE - WEAR MEASUREMENT, THRUST REVERSER BLOCKER DOOR | 2084 | |
| HIX3008 | Thrust Reverser Lock Pin | 15 | |
| HIX3008-0G | PIN LOCKOUT THRUST REVERSER CFM56-5 | 2 | |
| HU87113-1 | LOCK - THRUST REVERSER HOLD OPEN | 6 | |
| IAE1N20010 | LOCKOUT PIN - THRUST REVERSER | 15 | |
| J78047-1 | COLLARS - HINGE LOCK, THRUST REVERSER | 2084 | |
| JAEIN20010 | LOCKOUT PINTHRUST REVERSER | 1 | |
| K78006-1 | LOCK - THRUST REVERSER ISOLATION VALVE (GROUND) | 3 | |
| K78006-1 | LOCK-THRUST REVERSER ISOLATIONVALVE | 3 | |
| K78006-2 | THRUST REVERSER LOCK PIN ASSEMBLY | 1 | |
| LJ7830206-1 | BLOCKASSY,THRUST REVERSER LOCKOUT | 2084 | |
| MIT315A2057-1 | THRUST REVERSER LOCK HANDLE GAUGE GO-NO | 1 | |
| MITRD00103013 | THRUST REVERSER DEPLOYED GROUND [SAFETY SLEEVE] LOCK | 2084 | |
| MT-T-A-0289 | THRUST REVERSER LOCK ASSEMBLY TOOL | 1 | |
| NAS1303-38H | PIN, THRUST REVERSER LOCK | 1 | |
| PWA88012 | PIN, LOCK - THRUST REVERSER, DIRECT CTL VALVE | 3 | |
| PWA88013 | PIN, UNLOCK - THRUST REVERSER ACTUATOR | 1 | |
| PWA88014 | PIN, LOCK - THRUST REVERSER ACTUATOR | 1 | |
| R78001-1 | PLATFORM - ACCESS, THRUST REVERSER, BLOCKER DOOR | 1 | |
| R78001-2 | PLATFORM - ACCESS, THRUST REVERSER, BLOCKER DOOR | 1 | |
| R78001-3 | PLATFORM - ACCESS, THRUST REVERSER, BLOCKER DOOR | 1 | |
| R78001-58 | PLATFORM - ACCESS, THRUST REVERSER, BLOCKER DOOR | 1 | |
| R78003 | PLATFORM - ACCESS, THRUST REVERSER BLOCKER DOOR | 1 | |
| R78005-1 | PLATFORM - ACCESS, THRUST REVERSER BLOCKER DOOR | 1 | |
| SPL-14993 | LOCK - THRUST REVERSER OPENING ACTUATOR, 15 DEGREE | 1 | |
| SPL-2418 | LOCKPIN - EQUIPMENT, THRUST REVERSER ACTUATION MODULE LOCKOUT | 1 | |
| SPL-2431 | LOCK, THRUST REVERSER ACTUATOR | 1 | |
| TMHBS13-00-00 | THRUST REVERSER LOCKS | 2 | |
| UT1271 | BLOCKER - THRUST REVERSER DEPLOYMENT | 1 | |
| UT1271/1 | LWR THRUST REVERSER BLOCKER | 2084 | |
| UT1271/1 | SPL-5574 BLOCKER - THRUST REVERSER DEPLOYMENT | 1 | |
| C78023-13 | LOCK EQUIPMENT, THRUST REVERSER | 2084 | |
| IAE1N20010 | LOCKOUT PIN - THRUST REVERSER | 2084 | |
| В78009-26 | LOCK EQUIPMENT - THRUST REVERSER MAINTENANCE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
