| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| F65-7-50042 | Test Meter | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 01-0384-000 | ALTIMETER TEST SET | 1 | |
| (CALIB) 110-0430-100 | TEST SET - RADIO ALTIMETER (CALIBRATION) | 1 | |
| (CALIB) 1502C | REFLECTR REFLECTOMETER, CABLE TESTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 351118065372 | RADIO ALTIMETER TEST SET SIM815-16 | 1 | |
| (CALIB) 35677A | S-Parameter Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 522-4610-004 | RADIO ALTIMETER TEST SET (CALIBRATION) | 1 | |
| (CALIB) 6680-00-403-5991 | TACHOMETER TESTER. NATO STOCK NUMBER IS N-11-ECS MODEL 2B. (CALIBRATION) | 1 | |
| (CALIB) 85046A | S-Parameter Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 85047A | S-Parameter Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 901-14721 | TORQUE METER RUN-OUT TEST (CALIBRATION) | 1 | |
| (CALIB) 95-92082-0003 | POTENTIOMETER TEST BOX (CALIBRATION) | 1 | |
| (CALIB) 95-92082-0005 | POTENTIOMETER TEST BOX (CALIBRATION) | 1 | |
| (CALIB) 980N 1 | Altimeter Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ALT 52A | Altimeter Test Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ALT 8000 | Radio Altimeter Test Set (CALIBRATION) (CALIBRATION) | 5 | |
| (CALIB) ALT-51A | Radio Altimeter Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ALT-8000 | TESTSET RADIO ALTIMETER - AEROFLEX (CALIBRATION) | 5 | |
| (CALIB) ASI 175 | Altimeter Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C77002-20 | TEST BOX TACHOMETER SYSTEM (CALIBRATION) | 1 | |
| (CALIB) DRA 707 | Radio Altimeter Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRA707 | TEST SET - DIGITAL RADIO ALTIMETER (CALIBRATION) | 1 | |
| (CALIB) DRA707B1 | TEST SET - DIGITAL RADIO ALTIMETER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SIM530 | TEST SET - RADIO ALTIMETER (CALIBRATION) | 1 | |
| (CALIB) TQTP101 | TORQOMETER TEST RIG (0-1200 LB.IN.) (CALIBRATION) | 1 | |
| (CALIB) TQTP50 | TORQOMETER TEST RIG (0-600 LB.IN.) (CALIBRATION) | 1 | |
| (CALIB) 110-0430-100-02 | TEST SET - RADIO ALTIMETER (CALIBRATION) | 1 | |
| (CALIB) КПРВ-5 | RADIO ALTIMETER TESTER (CALIBRATION) | 1 | |
| 005M133 | KIT: METER,AMPERAGE,DIGITAL,TEST, W/SHUNT & CASE | 2 | |
| 01-0384-0 | RADIO ALTIMETER TEST SET | 1 | |
| 01-0384-00 | Test Set - Radio Altimeter (Collins) | 1 | |
| 01-0886-00 | TEST SET - RADIO ALTIMETER (ALA-52A) | 1 | |
| 1-30100-0221 | LUMINOMETER FUEL TEST EQUIPMENT | 2 | |
| 1006-603 | DIGITAL LOW RESISTANCE OHMMETER / TESTER | 1 | |
| 10090 | METER: TEST,ANALOG FW, | 1 | |
| 101-00562 | ADAPTER CABLE - FUEL QUANTITY INDICATING SYSTEM (FQIS) TESTER (USED ON AIRPLANES WITHOUT DENSITOMETERS) (BARFIELD INSTRUMENT CORP.) | 4 | |
| 1016200 | FLOWMETER TEST TOOL | 1 | |
| 110-0340-100-02 | TEST SET - DIGITAL RADIO ALTIMETER | 1 | |
| 110-0420-100-02 | Digital Radio Altimeter Test Set - DRA707 | 1 | |
| 110-0430-100 | DRA-707 DIGITAL RADIO ALTIMETER TEST SET | 3 | |
| 110-0430-100-02 | RADIO ALTIMETER TEST SET | 5 | |
| 110-0430-100-02 B1 | TEST SET-DIGITAL RADIO ALTIMETER | 1 | |
| 110-0440-101 | COM-1929 Test Cable - Radio Altimeter 737-600, -700, -800 | 4 | |
| 110-0460-10 | RADIO ALTIMETER TEST SET | 1 | |
| 110-0460-102 | Test Set - Analog Radio Altimeter ARA552 | 1 | |
| 110-0460-102-01 | RADIO ALTIMETER RAMP TEST ARA-552 | 3 | |
| 110-0460-102-05 | ARA-552 TEST SET W/ DC ALT BOARD (CE MARKED) RADIO ALTIMETER | 3 | |
| 110-0460-105 | TEST SET - RADIO ALTIMETER | 2 | |
| 110-430-100-02 | RADIO ALTIMETER TEST SET | 1 | |
| 11021 | LCR METER 100-10KHZ-1715 DIGIBRIDGE TESTER | 2 | |
| 110043010002 | TEST SET - DIGITAL RADIO ALTIMETER | 5 | |
| 1159GSE40536 | G-METER TEST SET | 1 | |
| 1159GSE40536-1 | G METER BREAKOUT / TEST BOX | 1 | |
| 1159GSE40536-5 | G-METER TEST HARNESS | 1 | |
| 1159GSE40536-5 | G-METER TEST SET | 1 | |
| 1159GSE40536-9 | G-METER TEST HARNESS | 1 | |
| 1159GSE50010-1 | FUEL DENSITOMETER TEST JUMPER | 1 | |
| 1159SEAV40236 | G-METER TEST SET | 1 | |
| 1159SEAV40236-1 | G METER BREAKOUT / TEST BOX | 1 | |
| 120616-62 | TESTO 545 - LUX METER - LIGHT METER | 1 | |
| 124-00007 | ALTIMETER - MILLIBAR 35,000 FT @ 1811D PITOT TEST | 1 | |
| 139942 | 139942;8800SX Radio Test Set with Internal Precision Power Meter | 1 | |
| 1502B | Metallic Time-Domain Reflectometer TDR Cable Tester | 2 | |
| 1502C | REFLECTR REFLECTOMETER, CABLE TESTER | 4 | |
| 1502TDR | Cable Tester Time Domain Reflectometer | 1 | |
| 1550B | MEGA OHMETER TESTER (MEGGER) | 1 | |
| 1587 | MULTIMETER DIGITAL INSULATION TESTER | 8 | |
| 1587-FC | TESTER: MEGOHMETER, | 3 | |
| 1587FC | TESTER: MEGOHMETER, | 3 | |
| 15NNF50-1.0B | TEST PORT EXTENSION CABLE ARMORED PHASE STABLE 1.0 METER DC TO 18 GHZ N(M) - N(F) 50 OHM | 1 | |
| 1701B | TESTER-MILLIOHM METER | 1 | |
| 170T07565-401 | TEST SET - RADIO ALTIMETER | 1 | |
| 1710 | LCR METER 100-10KHZ-1715 DIGIBRIDGE TESTER | 2 | |
| 17G913034-1 | TESTER,CABLE TENSIOMETER | 1 | |
| 1863-9700 | Meter - Insulation (Range: 1-1,000 VDC or equivalent, select meter per test requirements) | 6 | |
| 1864-9700 | METER - INSULATION (RANGE: 1-1,000 VDC OR EQUIVALENT, SELECT METER PER TEST REQUIREMENTS) | 9 | |
| 1865-00-CE | Meter - Insulation (Range: 1-1,000 VDC or equivalent, select meter per test requirements) | 1 | |
| 1865PLUS | Meter - Insulation (Range: 1-1,000 VDC or equivalent, select meter per test requirements) | 3 | |
| 1865PLUSCE | Meter - Insulation (Range: 1-1,000 VDC or equivalent, select meter per test requirements) | 1 | |
| 2.225.030 | MANOMETER OF BTS-E BRAKE TEST STAND (0-250 PSI) | 1 | |
| 2037028-5103 | Bendix King Altimeter Test Set | 2 | |
| 2041595-5201 | RADIO ALTIMETER TEST SET | 1 | |
| 2041595-5202 | TEST SET - BENDIX RADIO ALTIMETER (MODEL AMT52A - JCAIR) (AEROFLEX - JCAIR) | 1 | |
| 233 | MULTIMETER TESTER | 1 | |
| 253 | Test Set − TEGAM Megohmmeter | 1 | |
| 206880 | NDT SIGMATEST D ( CONDUCTIVITY METER ) | 1 | |
| 210700 | DIGITAL MEGGER TESTER (MEGOHM METER} | 1 | |
| 23002970 | TEST SET, TORQUEMETER RUNOUT | 1 | |
| 18903550000 | ALTIMETER SWITCHING UNIT TEST SET | 1 | |
| 18960550000 | ENCODING ALTIMETER TEST SET | 1 | |
| 221ZT01 | TORQUEMETER TEST SET | 1 | |
| 230020-4 | TACHOMETER TESTER | 1 | |
| 230440-2 | Tachometer Tester model 1921 | 1 | |
| 2371F | MEGOMETER TEST SET | 1 | |
| 2471F | TESTER: MEGOHMETER, | 8 | |
| 253/SP2598 | Test Set − TEGAM Megohmmeter | 1 | |
| 260-7P | MULTIMETER_-TEST | 1 | |
| 260-8XPI | MULTIMETER DIGITAL INSULATION TESTER | 8 | |
| 294036 | FLOWMETER TEST MALABAR | 1 | |
| 2550875 | Fixture – Leak Test, Metering Valve Sleeve Assembl | 1 | |
| 296609-1 | METERED PRESSURE TEST FITTING | 1 | |
| 2A365 | TORQUE METER TEST EQUIPMENT | 1 | |
| 2C6471 | TEST SET, EVM AND ACCELEROMETER SYSTEMS | 1 | |
| 3005A | METER - INSULATION (RANGE: 1-1,000 VDC OR EQUIVALENT, SELECT METER PER TEST REQUIREMENTS) | 1 | |
| 300ZT01 | TORQUEMETER TEST SET | 1 | |
| 300ZT01Y01 | TORQUEMETER TEST SET | 1 | |
| 308011 | METER TEST ASSY | 1 | |
| 323.000.035 | TOOL - FLOW METER, HYDRAULIC SYSTEM TEST | 1 | |
| 35-93030 | BUNDLE ASSEMBLY FOR ALTIMETER CODER TESTS | 1 | |
| 355M03190001 | TACHOMETER TESTER | 7 | |
| 35677A | S-Parameter Test Set | 1 | |
| 3607876 | METERED PRESSURE TEST FITTING | 1 | |
| 323000035 | FERR - FLOW METER AERO HYDR SIS TEST | 1 | |
| 368-770 | Holtest / ID micrometer | 1 | |
| 368-993 | MITUTOYO 368-993 3-POINT INTERNAL MICROMETER HOLTEST SET 50-100MM | 1 | |
| 368-994 | MITUTOYO 368-994 (0.005MM) ECONOMY 3-POINT INTERNAL MICROMETER HOLTEST SET 100-200MM | 1 | |
| 368-996 | DIGIMATIC HOLTEST THREE POINT INTERNAL MICROMETER (0,8-2") | 2 | |
| 3800 | TACHOMETER TESTER | 1 | |
| 3800-001-220 | TECHOMETER TESTER 220 V | 1 | |
| 38495K21 | HYGROMETER/ THERMOMETER TESTER | 1 | |
| 3D035C | QUAD AMMETER TEST SET | 1 | |
| 3DO35C | QUAD AMMETER TEST BOX | 1 | |
| 4010148-001 | TEST CABLE, CALORIMETER BE AEROSPACE | 1 | |
| 4010148-002 | TEST CABLE, CALORIMETER BE AEROSPACE | 1 | |
| 4010152 | TEST CABLE, CALORIMETER BE AEROSPACE | 1 | |
| 4010152-001 | TEST CABLE, CALORIMETER BE AEROSPACE | 1 | |
| 4010152-002 | TEST CABLE, CALORIMETER BE AEROSPACE | 1 | |
| 4010156-001 | TEST CABLE, CALORIMETER BE AEROSPACE | 1 | |
| 4010156-002 | TEST CABLE, CALORIMETER BE AEROSPACE | 1 | |
| 4010165-001 | TEST CABLE, CALORIMETER BE AEROSPACE | 1 | |
| 4010165-002 | TEST CABLE, CALORIMETER BE AEROSPACE | 1 | |
| 4010171-001 | TEST CABLE, CALORIMETER BE AEROSPACE | 1 | |
| 40127 | DIGITAL SOUND LEVEL METER FOR TESTING EMERGENCY SIGNALING DEVICES TO ENSURE THEY MEET SOUND OUTPUT REQUIREMENTS. | 1 | |
| 407-00001 | METER: REV,F, DC400A TEST SET | 2 | |
| 410DM-10AR | FLOWMETER - PDQ TEST H/M 849 | 1 | |
| 410DME10AR | HYD LEAK TEST FLOWMETER ON ROLL AROUND CART | 1 | |
| 4240-002 | WATT METER TEST LEADS | 1 | |
| 4240-012 | WATT METER TEST LEADS | 1 | |
| 4240-018 | WATT METER TEST LEADS | 1 | |
| 4240-025 | WATT METER TEST LEADS | 1 | |
| 4240-031 | WATT METER TEST LEADS | 1 | |
| 4240-050 | WATT METER TEST LEADS | 1 | |
| 4240-062 | WATT METER TEST LEADS | 1 | |
| 4240-063 | WATT METER TEST LEADS | 1 | |
| 4240-090 | WATT METER TEST LEADS | 1 | |
| 4240-100 | WATT METER TEST LEADS | 1 | |
| 4240-125 | WATT METER TEST LEADS | 1 | |
| 4240-132 | WATT METER TEST LEADS | 1 | |
| 4240-156 | WATT METER TEST LEADS | 1 | |
| 4240-179 | WATT METER TEST LEADS | 1 | |
| 4240-268 | WATT METER TEST LEADS | 3 | |
| 4240-278 | WATT METER TEST LEADS | 1 | |
| 4240-336 | WATT METER TEST LEADS | 1 | |
| 4423 | TESTER, CABLE TENSIONMETER | 1 | |
| 43222 | TORQUEMETER VERIFICATION TEST TOOL - TRUCHECK PLUS 350 NM (PN 43222) | 1 | |
| 44023 | TESTER, CABLE TENSIONMETER | 1 | |
| 4678322A | TEST CABLE-RADIO ALTIMETER THALES ERT-550 | 1 | |
| 468-280 | DIGIMATIC HOLTEST THREE POINT INTERNAL MICROMETER (10-11") | 2 | |
| 500-5645-105-1 | AILERON INCLINOMETER TEST CABLE | 1 | |
| 51 SERIES II | TESTER - FLUKE 51 II SINGLE INPUT DIGITAL THERMOMETER | 1 | |
| 51099-0101 | DYNAMOMETER TEST RIG | 1 | |
| 512-0317 | HOT WIRE ANEMOMETER TESTO 425 | 1 | |
| 5170 | GAUSS TEST METER | 7 | |
| 5120301 | TESTO 416 ANEMOMETER | 1 | |
| 522-4610-001 | TEST SET RADIO ALTIMETER (980N-1) | 1 | |
| 522-4610-003 | RADIO ALTIMETER TEST SET UNIT | 1 | |
| 522-4610-004 | Rockwell Collins Altimeter Test Set | 3 | |
| 5301-79-99ZZZ | TEST SET, RESISTIVITY OR MEGOHMETER MULTIRANGE | 1 | |
| 543-1 | SOUND METER TESTER | 8 | |
| 55-1000-30 | TEST SET,FLOW RATE INDICATING METER,FIELD TYPE | 1 | |
| 5953642-1 | PHOTOMETER PROBE TESTER | 6 | |
| 599-607-11902 | TEST SET - RADIO ALTIMETER | 1 | |
| 6037500 | DRIBBLE FLOW TEST FIXTURE USED ON THE LARGE NOZZLE METERING TIPS FOR DRIBBLE FLOW TEST. | 1 | |
| 6037501 | DRIBBLE FLOW TEST FIXTURE USED ON THE SMALL NOZZLE METERING TIPS FOR DRIBBLE FLOW. | 1 | |
| 60450E50111B | MULTIMETER, OPTICAL CONTINUITY TESTER | 1 | |
| 620A-4 | TESTER FAIL SAFE SAFETY OHMMETER - ATEQUIP | 1 | |
| 620A-4-NSN | IGNITER OHMMETER CIRCUIT TESTER, DIGITAL | 1 | |
| 620A-4R | IGNITER TESTER FAIL SAFE SAFETY OHMMETER - ATEQUIP | 2 | |
| 622350 | KIT: METER,AMPERAGE,DIGITAL,TEST, W/SHUNT & CASE | 2 | |
| 628989 | KIT: METER,AMPERAGE,DIGITAL,TEST, W/SHUNT & CASE | 1 | |
| 6625NL-63C/989 | HUMIDITY TESTER / HYGRO METER | 1 | |
| 6630-01-165-7133 | REFRACTOMETER TEST KIT FUEL | 1 | |
| 6799450 | NIIN 000709637TORQUE METER TEST SET | 1 | |
| 6799876 | TEST SET - TORQUEMETER RUNOUT | 1 | |
| 6799877 | ADAPTER CABLE - TORQUEMETER RUNOUT TEST SET | 1 | |
| 6799878 | ADAPTER CABLE, TORQUEMETER RUNOUT TEST | 1 | |
| 6877021 | SEAL FIXTURE, SECONDARY ORIFICE (WITH INLET SIMULTANEOUSLY CONNECTS METERING AND EXIT HOSE) TIP AND INLET OF FUEL NOZZLE ASSEMBLY TO PRESSURE SOURCE FOR PROOF TESTING. | 1 | |
| 6893546 | TEST SET - TORQUEMETER RUNOUT | 1 | |
| 6897103 | HOLDING FIXTURE, TIP SEAL HOLDS METERING SET SEAL FIXTURES ON FUEL NOZZLE FOR PRESSURE TESTING. | 1 | |
| 70067490 | TESTSET RADIO ALTIMETER - AEROFLEX | 1 | |
| 6630001122180 | HUMIDITY TESTER HYGRO METER | 1 | |
| 703A97-6701-00 | POTENTIOMETER TEST CASE | 1 | |
| 703A97-7210-00 | ANEMOMETER ADDITIONAL TEST UNIT | 1 | |
| 7138-10(M-10) | TESTER-PORTABLE TACHOMETER | 1 | |
| 7205-0151A | AIR FLOW METER TO UNISON IGNITION TEST SYSTEM | 1 | |
| 7295-1 | Unitized Torquemeter Indicator Test stand | 1 | |
| 790-618 | TEST BENCH POTENTIOMETER | 1 | |
| 791000 | TACHOMETER TEST BENCH | 1 | |
| 79T78 | PIEZOMETER TEST FIXTURE | 1 | |
| 8010 | SINGLE CHANNEL DESKTOP GAUSS METER ISO 17025 CAL CERT & TEST DATA | 1 | |
| 8020A | MULTI-METER – SELCAL ADJ/TEST | 1 | |
| 807-100-000-021 | VIBROMETER TESTER | 5 | |
| 80N-1A | JCAIR RADIO ALTIMETER TEST SET | 1 | |
| 80N1A | TEST SET, RADIO ALTIMETER | 1 | |
| 82305 | AIRSPEED/ALTIMETER SIMULATOR TEST | 1 | |
| 8384A | ANEMOMETER TESTER | 2 | |
| 8401-B | TEST SET,IND-GENERATOR, TACHOMETER | 1 | |
| 8401B | TEST SET,TACHOMETER | 1 | |
| 87340-TS-ENC | 87340-TS-ENC;ALT-8000 Radio Altimeter Test Set - Encore | 1 | |
| 878B | METER - LCR (INDUCTANCE, CAPACITANCE, RESISTANCE; USE COM-20443 FOR OH BLEED LOOP TESTING) | 13 | |
| 880 | METER - LCR (INDUCTANCE, CAPACITANCE, RESISTANCE; USE COM-20443 FOR OH BLEED LOOP TESTING) | 2 | |
| 8692 | TEST TOOL, TEMPERATURE POTENTIOMETER | 1 | |
| 8845A | MULTI TESTER FLUKE MULTI METER | 1 | |
| 906-10247-1 | BONDING METER LOOP RESISTANCE TESTER | 1 | |
| 9064 | Test box - setting dual potmeter | 4 | |
| 90W3060-TIR | TEST HARNESS AIRWORTHINES, FLOWMETER P | 1 | |
| 9109 | CASA POTENTIOMETER TEST BOX1 | 1 | |
| 87340 | Viavi / Aeroflex Radio Altimeter Flightline Test Set | 3 | |
| 912834-1-1 | MOTOR TEST DYNAMOMETER | 1 | |
| 912834-2-1 | MOTOR TEST DYNAMOMETER | 1 | |
| 92-92082-0005 | POTENTIOMETER TEST BOX | 1 | |
| 94-8136 | SUMP DRAIN EQUIPMENT - FUEL TESTER - PYROMETER THERMOMETER - HAND HELD, -112 TO 1400 DEGREE F (-80 TO 760 DEGREE C) RANGE | 20 | |
| 95-92082-000 | POTENTIOMETER TEST BOX | 1 | |
| 95-92082-0001 | POTENTIOMETER TEST BOX | 1 | |
| 95-92082-0003 | POTENTIOMETER TEST BOX | 1 | |
| 95-92082-0005 | POTENTIOMETER TEST BOX | 1 | |
| 95-92082-003 | POTENTIOMETER TEST BOX | 1 | |
| 95-92208-0001 | RADIO ALTIMETER TEST CABLE | 1 | |
| 95-92209-0001 | RADIO ALTIMETER TEST CABLE | 1 | |
| 9535 | ANEMOMETER TESTER | 7 | |
| 9535-A | ANEMOMETER TESTER AI | 4 | |
| 9565A | ANEMOMETER TESTER | 4 | |
| 9599-607-11512 | RADIO ALTIMETER RAMP TESTER | 7 | |
| 9599-607-15901 | TEST SET, RADIO ALTIMETER | 1 | |
| 9599-607-15902 | RADIO ALTIMETER TEST SET | 7 | |
| 9599-607-19103 | RADIO ALTIMETER AHV TEST CASE | 1 | |
| 97F92003500000 | TESTER MILLIOHMMETER | 14 | |
| 980 N-1 | SET, RADIO ALTIMETER TEST | 8 | |
| 980N-1 | TESTER, RADIO ALTIMETER | 8 | |
| 980N-1 / ASI-203 | Altimeter Test Set | 1 | |
| 980N-1A | TEST SET, RADIO ALTIMETER | 1 | |
| 980N1 | RADIO ALTIMETER TEST SET | 8 | |
| 980N1A | TEST SET, RADIO ALTIMETER | 1 | |
| 99A31303005000 | ENGINE-PARAMETER TEST SET | 1 | |
| 99A34301101400 | ADAPTOR BOX-TEST SET, RADIO ALTIMETER TRT SIM530 | 1 | |
| ??110-0430-100-02 | TEST SET - RADIO ALTIMETER COM-1922 | 5 | |
| A26003-12 | TEST EQUIPMENT - REGULATOR MANOMETER | 1 | |
| A543S-SM | ANGLE BEAM TRANSDUCER, 5 MHZ, 0.25" ELEMENT DIAMETER, MINIATURE SCREW-IN CASE STYLE, STRAIGHT MICRODOT CONNECTOR, W/TEST FORM CERT. (S/N: 345199, 345201) | 1 | |
| A77004-18 | TEST BOX - TACHOMETER SYSTEM | 1 | |
| A77004-19 | TEST BOX - TACHOMETER SYSTEM | 1 | |
| ACSMF100-.156/1M | MANUAL COUNTER SINK PROBE 100° DEGREES 200KHz - 1MHz WITH A CENTER FREQUENCY OF 500KHz, SHIELDED, WITH MICRODOT CONNECTOR .156"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ACSMF100-.187/1M | MANUAL COUNTER SINK PROBE 100° DEGREES 200KHz - 1MHz WITH A CENTER FREQUENCY OF 500KHz, SHIELDED, WITH MICRODOT CONNECTOR .187"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ACSMF100-.218/1M | MANUAL COUNTER SINK PROBE 100° DEGREES 200KHz - 1MHz WITH A CENTER FREQUENCY OF 500KHz, SHIELDED, WITH MICRODOT CONNECTOR .187"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ACSMF100-.250/1M | MANUAL COUNTER SINK PROBE 100° DEGREES 200KHz - 1MHz WITH A CENTER FREQUENCY OF 500KHz, SHIELDED, WITH MICRODOT CONNECTOR .250"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ACSMF100-.250/500K | MANUAL COUNTER SINK PROBE 100° DEGREES 200KHz - 1MHz, SHIELDED, WITH MICRODOT CONNECTOR .250"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| AEMC 6527 | BONDING TESTER MEGA OHMETER | 1 | |
| AF-3007-1.0 | MANUAL BOLT HOLE PROBE DIFFERENTIAL WITH COLLAR 25 KHZ 6.0" LONG, 1.0" (25.4mm) DIAMETER. TRIAX FISCHER FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3007-1.0/RA | ROTARY BOLT HOLE PROBE RA 2000 SCANNER, 25 KHZ ABSOLUTE REFLECTION. 6.0" LONG, 1.0" (25.4mm) DIAMETER. 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance..... | 1 | |
| AF-3014-.816/RA | ROTARY BOLT HOLE PROBE RA2000 SCANNER 25 KHZ ABSOLUTE REFLECTION 5.25" LONG. .816" (20.7mm) DIAMETER. 4 PIN STEP LEMO CONNECTOR FOR RA SCANNER. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3014-UX.810 | ADJUSTABLE ROTARY UNIVERSAL ABSOLUTE/REFLECTION PROBE 25 KHZ 5.25" LONG, 0.810" (20.5mm) DIAMETER. 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3015-.880/RA | ROTARY BOLT HOLE PROBE RA 2000 SCANNER 25 KHZ ABSOLUTE REFLECTION, 5.25" LONG, 0.880" (22.3mm) DIAMETER. 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3016-.960/RA | ROTARY BOLT HOLE PROBE RA2000 SCANNER, 25 KHZ ABSOLUTE REFLECTION 5.25" LONG, 0.960" (24.3mm) DIAMETER. 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3016-UX.960 | ADJUSTABLE ROTARY UNIVERSAL ABSOLUTE/REFLECTION PROBE 25 KHZ 5.25" LONG, 0.960" (24.3mm) DIAMETER. 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4041 | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .50" inches and diameter of .300" to .320" inches. Flat at the end. Used with ANDT3016-B reference standard. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4041-1 | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .400" inches and diameter of .300"Ø to .320"Ø inches. Flat at the end. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4041/4F | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .50" inches and diameter of .300" to .320" inches, 4 Pin Fischer Connector. Flat at the end. Used with ANDT3016-B reference standard. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4041/4L | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .50" inch and diameter of .300" to .320" inches. Supplied with a 4 pin Lemo connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4047 | LOW FREQUENCY REFLECTION SPOT PROBE 1KHz-40KHz, SUPPLIED WITH A TRIAX FISCHER CONNECTOR, .500"Ø DIAMETER Includes Test Report and Certificate of Conformance | 1 | |
| AF-4065 | LOW FREQUENCY REFLECTION RING PROBE, TRIAX FISCHER CONNECTOR, 50-500HZ, .600" INSIDE DIAMETER, 1.550" OUTSIDE DIAMETER. B777-200/300 57-20-01 PART 6 PAGE 2. Includes Test Report and Certificate of Conformance... | 1 | |
| AF-4105/4L | Detachable Surface Spot Probe,bridge, diameter of .310"Ø in. (7.9 mm) and a operating Frequency range of 1 kHz - 50 kHz, Supplied with a 4-pin LEMO Connector Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4105/7L | Detachable Surface Spot Probe,bridge diameter of .310 in. (7.9 mm) and a operating Frequency range of 1 kHz - 50 kHz (equivalent to SPO-1284, SPO-1598), 7-pin LEMO Powerlink Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4105/TF | Surface Probe, Standard Bridge Detachable Surface Probe with a diameter of .31 in. (7.9 mm) and a operating range of 1 kHz - 50 kHz (equivalent to SPO-1284, SPO-1596), Triax Fischer/ LEMO Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4112 | LOW FREQUENCY REFLECTION SPOT PROBE .25"Ø(6.4MM) DIAMETER 2KHz-200KHz,(Olympus NDT) USED WITH NDT781 777 57-40-02 PAGE 1 FIGURE 2. IncludesTest Report and Certificate of Conformance. | 1 | |
| AF-4144 | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .50" inches and diameter of .300" to .320" inches. 10 inches long Flat at the end. Used with ANDT3016-B reference standard. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4167 | LOW FREQUENCY REFLECTION SPOT PROBE .25"(6.4MM) DIAMETER 500Hz-50KHz,(EC/NDT) USED WITH NDT781 777 57-40-02 PAGE 1 FIGURE 2. IncludesTest Report and Certificate of Conformance. | 1 | |
| AF-4193 | LOW FREQUENCY REFLECTION SPOT PROBE. TIP DIAMETER OF.500"Ø(12.7mm), BODY DIAMETER OF (14.80mmØ, ), 1.600 "(41.0mm) HIGH, 1-30KHz, 90° DEGREES (RIGHT ANGLE) TRIAX FISHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4193/4F | LOW FREQUENCY REFLECTION SPOT PROBE. TIP DIAMETER OF.500"Ø(12.7mm), BODY DIAMETER OF (14.80mmØ, ), 1.600 "(41.0mm) HIGH, 1-30KHz, 90° DEGREES (RIGHT ANGLE) 4 PIN FISHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4198 | LOW FREQUENCY REFLECTION SURFACE PROBE 90° .400" DROP BENT, .187" DIAMETER, 5.0" LONG 1-50KHz , SHIELDED, 416 STAINLESS STEEL, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4205 | LOW FREQUENCY REFLECTION RING PROBE, 50HZ-3KHZ, ID 0.500"(12.7mm)Ø, OD 0.690" (17.5mm)Ø. OVERALL HEIGHT = 1.56"(39.5mm) x OVERALL DIAMETER = .787"(20mm) Ø, WITH A TRIAX FISCHER CONNECTOR.Supplie with probe guide Figure 6 27-1-6023. Includes Test Report | 1 | |
| AF-4237 | Detachable Surface Spot Probe, Reflection, diameter = .620"Ø in. (15.7 mm) and a operating frequency range of 100Hz -20kHz (equivalent to APG/16/S. SPO-2134), Supplied with a Triax Fischer/LEMO push/pull Connector. Includes Test Report and Certificate of | 1 | |
| AF-4316 | LOW FREQUENCY BRIDGE/DIFFERENTIAL SPOT PROBE, .500"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 5-50KHz, .440"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4317 | LOW FREQUENCY BRIDGE/DIFFERENTIAL SPOT PROBE, .625"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 400HZ - 30KHz, .50"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4318 | LOW FREQUENCY BRIDGE/DIFFERENTIAL SPOT PROBE, .875"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 100HZ - 2 KHz, .750"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4330 | Low Frequency Spot probe with a diameter of 0.25inches (6.35) and a operating frequency range of 100kHz - 500kHz. Bridge coil configuration, triax Fischer/LEMO Connector. Includes Test Report and Certificate of Conformance. Model:S/100KHZ-500KHZ/.25 | 1 | |
| AF-5024 | RIGID SURFACE PROBE ABSOLUTE SHIELDED 1-3MHZ, 90°, .50" DROP BENT 30° 1.0" FROM THE TIP, 0.125" DIAMETER SHAFT, 7.0 " LONG WITH MICRODOT CONNECTOR. Includes Test Report ancd Certificate of Conformance. | 1 | |
| AF-5112/7L | Detachable Pencil Probe 100-500KHz Unshielded with 7 pin Lemo connector. Tip diameter .187" with adjustable collar. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5129 | RIGID SURFACE PROBE .118"Ø DIAMETER TUBING, 20° DEGREES, 1.0" DROP 500KHz-1MHz WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5136 | SURFACE PROBE 90° 2" FROM THE HANDLE 1" AFTER THE 90°, .250 DROP .125" DIAMETER TIP, 100KHZ - 3 MHZ, 4.50" LONG TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5154 | LOW FREQUENCY SURFACE PROBE. DIFFERENTIAL. .375 DROP. .312 TIP DIAMETER. 6.0" LONG. 1-20KHZ. TRIAX FISCHER CONNECTOR. Includes test report. ....CONDUCTIVITY REFLECTION PROBE. RIGHT ANGLE. 200HZ-100KHZ. CENTER FREQUENCY 60KHZ. TRIAX FISCHER CONNECTOR.... | 1 | |
| AF-5155 | LOW FREQUENCY SURFACE PROBE. REFLECTION. .500 DROP. .312 TIP DIAMETER. 6.0" LONG. 1-20KHZ. TRIAX FISCHER CONNECTOR. Includes test report. ....CONDUCTIVITY REFLECTION PROBE. RIGHT ANGLE. 200HZ-100KHZ. CENTER FREQUENCY 60KHZ. TRIAX FISCHER CONNECTOR. I... | 1 | |
| AF-5156 | RIGHT ANGLE CONDUCTIVITY PROBE. CENTER FREQUENCY 60 KHZ. 200HZ-100KHZ FREQUENCY. TRIAX FISCHER CONNECTOR. .420 DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5173/2.25mm | Custom eddy current encircling probe for 2.25mm tube (outer diameter), inner diameter of coil housing 2.5mm, 50kHz – 500kHz, bridge differential, triax connector, include test report and certificate of conformance. | 1 | |
| AF-5173/4MM | Custom Eddy Current Encirling Probe, 4mm tube (outer diameter), 50KHz-500kHz, bridge differential, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5173/7.5mm | Custom eddy current encircling probe for 7.25mm tube (outer diameter), inner diameter of coil housing 7.5mm, 50kHz – 500kHz, bridge differential, triax connector, include test report and certificate of conformance. | 1 | |
| AF-5180/.750 | Rotary Hole Probe 0.750 inch (19.0 mm) to 0.812 inch (20.6 mm) diameter, Self Expanding 10 inch (254 mm) working length, Differential, Operating frequency 100 kHz - 2MHz 4 pin MIZ connector, Includes Test Report and Certificate of Conformance | 1 | |
| AF-5184 | HOCKING LOCATOR SURFACE PROBE, FE / NFE, 0.187"Ø TIP DIAMETER, .500" DROP, BENT, 200KHz, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5213/7L | Detachable Pencil Probe 500KHz-3MHz Unshielded Reflection, with 7 pin Lemo connector. Tip diameter .187" with adjustable collar. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5214/7L | Detachable Pencil Probe 500KHz-1MHz Absolute Shielded, with 7 pin Lemo connector. Tip diameter .187" with adjustable collar. IncludesTest Report and Certificate of conformance. | 1 | |
| AF-5227-1 | CUSTOM BOBBIN PROBE, 100-500KHz, DIFFERENTIAL, .425"Ø 1.6" LONG WITH A 1 METER LONG HARDWIRED CABLE ATTACHED TO A TRIAX FISCHER CONNECTOR. Used to inspect brass tubing I.D.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5243 | SURFACE PROBE WITH .050" DIAMETER TUBING. 35 DEGREES .500" DROP SHAFT 5.0" LONG TRIAX FISCHER CONNECTOR. .5” TIP. 50-500KHz. Includes Test Report and Certificate of Conformance | 1 | |
| AF-5257 | 90 DEGREE LOW FREQUENCY SURFACE PROBE, REFLECTION, .250" DIAMETER TIP .750" DROP 6.5" LONG 1-20KHz TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance | 1 | |
| AF-5257G | PROBE GUIDE Material: Lucite. Diameter 1.50" ±0.02 . Used in Boeing procedure 55-10-27 Part 6. Includes Test Report and Certificate of Conformance | 1 | |
| AF-5258 | LOW FREQUENCY BOLT HOLE PROBE, Absolute Shielded. 13KHZ, 0.625" Diameter, 2.0" Working Length WITH COLLAR TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance | 1 | |
| AF-5273 | RIGID STRAIGHT SURFACE PROBE, ABS SHIELDED, .125"Ø , .100"Ø COIL DIAMETER, 1-3MHz WITH A 2MHz CENTER FREQUENCY, ,700"( 17.788mm ) DROP, 90° JOGGLE, SUPPLIED WITH A TRIAX FISCHER CONNECTOR, 4.0" (101.6mm) LONG. Includes Test Report and Certificate of Confo | 1 | |
| AF-5274 | RIGID STRAIGHT SURFACE PROBE, ABS SHIELDED, .125"Ø , .100"Ø COIL DIAMETER, 1-3MHz WITH A 2MHz CENTER FREQUENCY, ,700"( 17.788mm ) DROP, 30° JOGGLE, SUPPLIED WITH A TRIAX FISCHER CONNECTOR, 12.0" (304.8mm) LONG. Includes Test Report and Certificate of Conf | 1 | |
| AF-5278/TF | HIGH FREQUENCY SURFACE PROBE, Twin Coil Differential 50-500KHZ. 4.0" Long 0.375" Diameter with Triax Fischer connector. For use with Boeing Reference Standard 497 767 Part 6 53-00-04. IncludesTest Report and Certificate of conformance. | 1 | |
| AF-5279 | Low Frequency Pencil Probe, Shielded 100KHz-500KHz, 90°, .100" Drop, .150"Ø Tubing diameter, 12.0" Long with a 4.0" Long handle supplied with a Triax Fischer / Lemo Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5292 | ABSOLUTE SHIELDED STRAIGHT PENCIL PROBE, .25"Ø (6.35mm)Ø with a Tip diameter of .180"Ø attached to a 6 foot cable with adjustable collar. Nortec 8 pin Burndy connector 2-4MHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5293 | ABSOLUTE UNSHIELDED STRAIGHT PENCIL PROBE, .25"Ø (6.35mm)Ø with a Tip diameter of .180"Ø attached to a 6 foot cable with adjustable collar. Nortec 8 pin Burndy connector 500KHz-1MHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5336/2MHZ-1 | Fixed Diameter Solid Rotating Scanner Probe, Differential Reflection coil Configuration,1/8"Ø, 1-3MHz with a 2MHz Center Frequency, Unshielded, 1.75" Working Length Supplied with a 4 Pin Fischer Connector. Includes Test Report and Certificate of Conforman | 1 | |
| AF-5347 | Low Frequency Reflection Eddy Current Probe, 1-20 khz, 90°, 5/16"(.312") Diameter Tip, .500" Drop, 6" Long Supplied with a Triax Fischer Triaxial Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5442 | SOLID ROTATING SCANNER PROBE 3.0"Ø DIAMETER,100KHz-2MHz , 2.0" WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5453 | Surface Probe, 90° right angle, 50-500 kHz frequency, NFe/Fe, absolute, shielded, 0.063 in (1.6mm) diameter Tip, 0.787 in (20.0 mm) drop, 4.500 in (114.30 mm) length with a 50mm working length supplied with a microdot connector. Includes Test Report a... | 1 | |
| AFC-0512-4L | 5MHz High Damped straight beam transducer skewed 4° to the left attached to a 2.0" inch handle with a total length of 4.0" .125" element with a case diameter of .187"Ø and a case height .500". Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-0512-4R | 5MHz High Damped straight beam transducer skewed 4° to the right attached to a 2.0" inch handle with a total length of 4.0" .125" element with a case diameter of .187"Ø and a case height .500". Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-0517-4L | 10MHz High Damped straight beam transducer skewed 4° to the left attached to a 2.0" inch handle with a total length of 4.0" .125" element with a case diameter of .187"Ø and a case height .500". Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-0517-4R | 10MHz High Damped straight beam transducer skewed 4° to the right attached to a 2.0" inch handle with a total length of 4.0" .125" element with a case diameter of .187"Ø and a case height .500". Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-0531 | 10MHz High Damped pancake transducer attached to a 1.5 inch handle, 3.5" Total Length. .25"Ø element with a max case height .25", Case Diameter .375"Ø Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-1012HT | High Damped High Resolution Contact Transducer, 10 MHz, 0.125 in. Element Diameter, .25"Ø Fingertip Case Style, top Mount Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-1018-1 | 10MHZ LONGITUDINAL BEAM TRANSDUCER .187"Ø DIAMETER ELEMENT, .25"Ø HOUSING 1.0" LONG WITH TOP MOUNTED MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-1025H32 | Quick fit Screw in Type straight beam transducer, 10MHz .250"Ø Diameter, Top Mounted Microdot Connector, MSW Style, 3/8-32 thread. Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-1025HS | High Damped Contact Transducer, 10 MHz, 0.25 in. Element Diameter, Fingertip Case Style, Right (Side) Microdot Connector (.500" H x .390"OD). Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-1025S | Contact Transducer, 10 MHz, 0.25 in. Element Diameter, Fingertip Case Style, Right Microdot Connector, (.500" H x .375"OD). Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-1025SH32 | Quick fit Screw in Type straight beam transducer, 10MHz .250"Ø Diameter, Side Mounted Microdot Connector, MSW Style, 3/8-32 thread. Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-1525S | Contact Transducer, 15 MHz, 0.25 in. Element Diameter, Fingertip Case Style, Right Microdot Connector, (.500" H x .375"OD). Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-2012HS | Contact Transducer, 20 MHz, 0.125 in. Element Diameter, Fingertip Case Style, Side Mount Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-2012HT | Contact Transducer, 20 MHz, 0.125 in. Element Diameter, Fingertip Case Style, Top Mount Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-3022HS | SINGLE ELEMENT FINGER TIP CONTACT TRANSDUCER, KNURLED CASE, 2.25MHZ, .25"Ø, .300"Ø DIAMETER by .600" LONG HOUSING. WITH SIDE MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-525 | Contact Transducer, 5 MHz, 0.25 in. Element Diameter, Fingertip Case Style, Right Microdot Connector..(.500" H x .375"OD). Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-525H32 | Quick fit Screw in Type straight beam transducer, 5MHz .250"Ø Diameter, Top Mounted Microdot Connector, MSW Style, 3/8-32 thread. Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-525S | Contact Transducer, 5 MHz, 0.25 in. Element Diameter, Fingertip Case Style, Right Microdot Connector, .500" H x .375"OD). Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-525SH32 | Quick fit Screw in Type straight beam transducer, 5MHz .250"Ø Diameter, Side Mounted Microdot Connector, MSW Style, 3/8-32 thread. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-032/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1002-1 | CUSTOM 3 HOLE STANDARD, MATERIAL: 7075-T6 ALUMINUM, .030x.030" CORNER EDM NOTCH IN EACH HOLE. HOLE SIZES 7/16"(.437"), .1/2"(.500"), 11/16"( .687") DIAMETERS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1017AL | Custom Eddy Current Hole Standard 7075-T7 Aluminum ( Equivalent substitute for 7010 Aluminum). Hole Sizes 1.77" and 0.58" diameter. EDM flaw size: 0.5mm(.020") x 0.1mm (0.004") +/- .002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1035/7075 | 5 hole reference standard sizes; 1/4", 5/16", 3/8", 7/16" and1/2" inch diameters.( .030" X .030" x .005" +/-.001" corner EDM notch. 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2003-1AL | Contains 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters.( .030X.030 CORNER NOTCH and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) 7075-T6 ALUMINUM. Includes Test Report and Certificate of C | 1 | |
| AFNDT-2003-1S | Contains 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030X.030 CORNER NOTCH and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) 4340 STEEL. Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-2003-1S-1 | 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 Thru EDM notches .005"(+/- .001") and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) 4340 Steel. Includes Test Report and Certificate... | 1 | |
| AFNDT-2065 | Olympus Aluminum multi-hole reference standard. Contains 5 hole sizes; 7/16, 1/2, 9/16, 3/4 and 1.0" inch hole diameters.( .030" x.030" corner EDM notch in each hole). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2108 | CUSTOM DEPTH METER BASE, BOTH PARTS PER SPEC. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2108-1 | CUSTOM DEPTH METER BASE, PER FL TECHNICS SPEC.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2108-2 | CUSTOM DEPTH METER BASE, PER FL TECHNICS SPEC.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.201 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.201" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.500D | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.500" DIAMETER HOLE D SHAPE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.812 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.812" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.950 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.950" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-1.06 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (1.06" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3001 | Embraer 170 reference standard with a .473" diameter hole. Per NDTM PT1 51-00-00-916-802-A , 1.4mm x 1.4mm +/-.05mm long x 0.1mm +/-.05 wide corner EDM notch. Material: 7050-T7 Aluminum. Block size 2.0" x 2.0" x .375". Includes Test Report and Certifica | 1 | |
| AFNDT-3004S | Contains 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .020 THRU NOTCH and 3 SURFACE NOTCHES .020", .030", .040" DEEP x .750" LONG.) 4340 STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3016-2024T3 | Contains 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030 Corner EDM Notch and 3 Surface EDM Notches .010", .020", .040" Deep x .750" Long.) Material: 2024-T3 Aluminum. Includes Test Report | 1 | |
| AFNDT-3019S | CUSTOM AIR FORCE EDDY CURRENT BOLT HOLE STANDARD PER CUSTOMER SUPPLIED DRAWING, 1/4" 8630 STEEL PLATE (4130 EQUIVALENT ALTERNATIVE). EDM: 0.030 x 0.030 CORNER NOTCH. HOLE DIAMETER= 0.437Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3024SS | 304 STAINLESS STEEL AWS RESOLUTION BLOCK 1.0" x 3.0" x 6.0". WITH A QUANTITY OF (9) .062" DIAMETER HOLES.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3112 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2024-T3 Aluminum. Plate Size: 2.0" x 4.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3112/2014-T6 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2014-T6 Aluminum. Plate Size: 2.0" x 5.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3112/2024-T6 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2024-T6 Aluminum. Plate Size: 2.0" x 5.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3113 | Custom Bolt hole Standard, Hole Size; 5/8"Ø inch diameter Hole. .020" Thru EDM notch .005" Wide(+/- .001"). Material: 7075-T6 Aluminum. Plate Size: 2.0" x 2.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3171AL | 17 HOLE REFERENCE STANDARD 7075-T6 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 11/16 and 3/4 diameters. Includes 15 Thru EDM Notches .040" +/- 10% x .005" +/- .001" Wide. Includes Test Report and Certificate ... | 1 | |
| AFNDT-3171CS | 17 HOLE REFERENCE STANDARD 4130/4340 Carbon Steel, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 11/16 and 3/4 diameters. Includes 15 Thru EDM Notches .040" +/- 10% x .005" +/- .001" Wide. Includes Test Report ... | 1 | |
| AFNDT-3171SS | 17 HOLE REFERENCE STANDARD 304 Stainless Steel, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 11/16 and 3/4 diameters. Includes 15 Thru EDM Notches .040" +/- 10% x .005" +/- .001" Wide. Includes Test Report and... | 1 | |
| AFNDT-3178AL | Contains 12 hole sizes: 3mm, 5mm, 7mm, 9mm, 11mm, 13mm, 14mm,15mm, 16mm 17mm,18mm and 19mm diameters. (1mm x 1mm x 0.15mm ± 0.03mm) Corner EDM Notches. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3178AL-1 | Contains 12 hole sizes: 3mm, 5mm, 7mm, 9mm, 11mm, 13mm, 14mm,15mm, 16mm 17mm,18mm and 19mm diameters. (1mm x 1mm x 0.15mm ± 0.03mm) Corner EDM Notches. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3179AL | 100° Countersink Multi Hole Standard. Contains 12 hole sizes: 3mm, 5mm, 7mm, 9mm, 11mm, 13mm, 14mm,15mm, 16mm 17mm,18mm and 19mm diameters. (1mm x 1mm x 0.15mm ± 0.03mm) Corner EDM Notches. Material: 2024-T3 Aluminum. Includes Test Report and Certificat | 1 | |
| AFNDT-3201A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 11.3mm(.445")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3202A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 14.3mm(.563")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3203A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.1mm(.594")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3204A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.9mm(.626")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3205A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.0mm(.630")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3206A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.3mm(.642")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3207A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.7mm(.657")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3208A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 17.5mm(.689")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3209A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 19.3mm(.760")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3213AL | 2024-T3 Aluminum hole standard, hole diameter 5/32", notch type .030 x .030" Coner Notch". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3230A | Custom Bolt Hole Calibration Block, 2024-T3 Aluminum. Hole Diameter 5/16" (.312")Ø Contains one EDM Corner Notch .050" x .050" +/- .001", and one EDM Surface Notch .750" long x .020 deep +/- .001 . Block Size = 2.0" x 2.0" x .25". Includes Test Rep... | 1 | |
| AFNDT-3238AL | Contains 13 hole sizes; 1/8, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. EDM: ( .030 X .030 X .005 +/- .002) CORNER NOTCH and ( .020 X .005 +/- .002) THRU NOTCH. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report a | 1 | |
| AFNDT-3240AL | Aluminum multi-hole reference standard. Contains 5 hole sizes; 1/8, 5/32, 3/16, 7/32 and 1/4" inch hole diameters.( .030" x.030" corner EDM notch in each hole). Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3254AL | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameters = 2 Holes 22.23mm(.875")Ø, and 25.4mm(1.0")Ø. EDM Flaws:.030" x .030" x .005" +/- .001" Corner EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Con | 1 | |
| AFNDT-3264 | Custom Reference Standard for the Boeing Lead Screw inspection, equivalent to 7903385. Material: 4150 Alloy Steel, 1.5 Outside Diameter and 1.069" Inside Diameter with 3 EDM Flaws per BSS 7048 page 2 Table 1. Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3296/316L | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters, .020 x .005" ± .002" Thru EDM Notches in each Hole. Material: 316L Stainless Steel. Includes Test Report and Certificate of Co | 1 | |
| AFNDT-3305AL | Custom 2 Hole Standard. Material: 7075-T6 Aluminum, Block Size: ..250" x 2.0" x 4.0" . HOLE SIZES:.098" and .188" Diameter with Type A% EDM Notch: .035" x .035" x .004" W ±.001". Includes Test Report and Certificate of Conformance Traceable to NIST. | 1 | |
| AFNDT-3386/7075T6 | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters, .040 x .005 ±.002" Through EDM Notches in each Hole. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3426 | Custom Eddy Current Hole Standard. Hole Diameters: 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm, 9.5 mm, 10.0 mm, 10.5 mm, 11.0 mm, 11.5 mm, 12.0 mm. Material: Aluminium 7050-T74. Includes Test Report and Certific | 1 | |
| AFNDT-3453 | Custom Calibration Block, 7050-T7 Aluminum. Hole Diameter .310 Ø Contains one EDM Corner Notch .020" x .020" +/- .002", and one EDM Surface Notch .030 deep x .015" wide +/- .002 . Block Size = 3.75" x 1.0" x .25". Includes Test Report and Certificate | 1 | |
| AFNDT-3459AL | Calibration standard, Aluminium alloy 2024-T3, rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1. | 1 | |
| AFNDT-3459TI | Calibration standard, 6Al-4v Titanium , rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1.1/8 in | 1 | |
| AFNDT-3484AL | Eddy Current Bolt Hole Calibration standard, 5 Hole Sizes. Material: 7075-T6 Aluminium, Hole diameters: .750", .875",1.00" 1.125" 1.187", .030" x .030" x .005" ± .001" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3485AL | Eddy Current Bolt Hole Calibration standard, 3 Hole Sizes. Material: 7075-T6 Aluminium, Hole diameters: 1.250" 1.375", 1.500", .030" x .030" x .005" ± .001" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3512AL | MISTRAS 3 HOLE EDDY CURRENT TEST STANDARD, HOLE SIZES: .250", .375", .500" DIAMETERS, EDM CORNER NOTCH: .025" x .025" x .005 ± .002", MID-WALL NOTCH:.080" x .025" DEEP +/-.002" per BSS7048. 1 SURFACE EDM NOTCH .150" LONG x .030" DEEP. ALL NOTCHES TO B... | 1 | |
| AFNDT-3549 | Custom 4 hole standard. Material 17-4PH or 17-7PH Stainless. Size: 6.0" x 4.65" x .375" Thick. Hole Diameters: 1.125",1.190",1.250", and..1.3750" EDM Corner Notch .030" x .030" x .005" ± .001" in each hole. Includes Test Report and Certificate of C... | 1 | |
| AFNDT-3669-1043 | BOEING COUNTERSINK REFERENCE STANDARD 737 PT6 51-00-00 PROCEDURE 19, 0.375” DIAMETER 100° COUNTERSINK HOLE. MATERIAL: 43404340M STEEL. SIZE: 2.0" X .375" THICK( ROUNDSQUARE. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AFNDT-IIW-01AL | ALUM. IIW TYPE 1 TEST BLOCK.. Aluminum Ultrasonic IIW Type 1 Test Block 7075-T6 Aluminum. 1 "x 4"x 12". Contains 2" diameter hole and 4" radius. Also, 1/8" x 1" radius alternate reflector and 1/16" deep on echo side. Meets ASTM-E-164, MIL-STD-2154 a... | 1 | |
| AFNDT-IIW-01CS | IIW TYPE 1 TEST BLOCK.. Aluminum Ultrasonic IIW Type 1 Test Block 1018 Carbon Steel. 1 "x 4"x 12". Contains 2" diameter hole and 4" radius. Also, 1/8" x 1" radius alternate reflector and 1/16" deep on echo side. Meets ASTM-E-164, MIL-STD-2154 and AW... | 1 | |
| AFP-1012/90 | 10 MHZ 90° .125"Ø diameter focused pencil transducer with a .060" Replaceable tip. Standard microdot connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-1L | CUSTOM 45° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.340" ) STEP OF REFERENCE STANDARD NDT6091. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-1R | CUSTOM 45° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.340" ) STEP OF REFERENCE STANDARD NDT6091. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-2L | CUSTOM 50° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.240" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-2R | CUSTOM 50° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.240" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-3L | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-3R | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-4L | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .412" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-4R | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .412" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AGE-01158-401 | RADIO ALTIMETER TEST HARNESS | 3 | |
| AGE-01612-401 | TEST SET - RADIO ALTIMETER | 1 | |
| AGE-04270-401 | TEST SET - RADIO ALTIMETER | 4 | |
| AGE04270-401 | TEST SET-RADIO ALTIMETER | 4 | |
| ALA-51A | RADIO ALTIMETER TEST SET (GROUND TEST/TROUBLESHOOTING) | 1 | |
| ALA-52A | TEST SET - RADIO ALTIMETER | 1 | |
| ALT -8000 | RADIO ALTIMETER FLIGHTLINE TEST SET | 9 | |
| ALT 8000 | RADIO ALTIMETER TEST SET | 9 | |
| ALT-8000 | Radio Altimeter Flightline Test Set | 9 | |
| ALT-8015 | Military Radio Altimeter Flightline Test Set | 2 | |
| ALT-87340 | TEST SET - RADIO ALTIMETER (ALA-52A) | 1 | |
| ALT-9000 | ALT-9000;ALT-9000 Radio Altimeter Test Kit | 1 | |
| ALT8000 | Radio Altimeter Test Set | 9 | |
| AMH.562SE | Manual hole probe, Split-end, Expandable from 0.562 inch (14.27mm) diameter to .625 inch (15.9mm) with a 2.0 inch (5.08cm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificic | 1 | |
| AMHF-.156/.5WL | Manual hole probe, ferrite shielded, 0.156 inch (3.96mm) diameter and .500" inch (27.9mm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.187/.5WL | Manual hole probe, ferrite shielded, 0.187 inch (4.76mm) diameter and .500" inch (27.9mm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.187/2.4WL | Manual hole probe, ferrite shielded, 0.187 inch (4.75mm) diameter and 2.5 inch (61.0mm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.187/200K-1M | Manual hole probe, ferrite shielded, 0.187 inch (4.76mm) diameter and 1.1 inch (27.9mm) working length, frequency 200kHz -1MHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.218 | Manual hole probe, ferrite shielded, 0.218 inch (5.5mm) diameter and 1.1 inch (27.9mm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.250/200K-1M | Manual hole probe, ferrite shielded, 0.250 inch (6.35mm) diameter and 1.1 inch (27.9mm) working length, frequency 200kHz -1MHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.375/.75WL | Manual hole probe, ferrite shielded, 0.375 inch (9.52mm) diameter and .750" inch (50.8mm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHR.750 | Manual hole probe, 0.750 inch (19.05mm) diameter and 2.0 inch (50.8mm) working length, frequency 50kHz -500kHz, microdot connector, reflection coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMT-51A | Altimeter Test Set | 3 | |
| APN-45-5/L 500K | RIGID SURFACE PROBE SHIELDED, .125"Ø TIP DIAMETER, .500" DROP, CRANKED 45° DEGREES, 5.0" LONG WITH MICRODOT CONNECTOR. (LOCATOR 500KHZ ,47UH). Includes Test Report and Certificate of Conformance. | 1 | |
| APN-475-4.5/L500K | Surface Probe, 45 degrees, 500kHz frequency, Fe/NFe, absolute, shielded, 0.13 in (3.30 mm) diameter, 4.50 in (114.30 mm) length, 0.75 in (19.05 mm).Includes Test Report and Certificate of Conformance. | 1 | |
| APN-5FX/2M | Flexible Surface Pencil Probe, absolute shielded, frequency: 1-3MHz with the center frequency 2MHz. Measurement head diameter tubing 0.125"Ø inch (3.18mm). Total length: 5 inches (12.7cm) supplied with a.microdot connector. Includes Test Report and Ce... | 1 | |
| APN-975-4.5/L500K | Surface Probe, 90° right angle, 500 kHz frequency, NFe/Fe, absolute, shielded, 0.130 in (3.30 mm) diameter, 4.500 in (114.30 mm) length, 0.750 in (19.05 mm) tip length 500KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| APQ95-6/1-20K | LOW FREQUENCY SURFACE PROBE 90° DIFFERENTIAL, .500" DROP .25"Ø DIAMETER, 1-20KHz 6.0" LONG SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| ARA-552 | Radio Altimeter Test Set | 4 | |
| ARG7076-5511 | Metering Valve Test / Holding Fixture | 2 | |
| ARP-.330-.750 | LOW FREQUENCY RING PROBE, REFLECTION, 1-10KHZ TRIAX FISCHER CONNECTOR, .330" INSIDE DIAMETER, .750" OUTSIDE DIAMETER. B777-200/300 PART 6 57-20-03 PAGE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.187SS/2.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN STEP LEMO CONNECTOR..HEAD DIAMETER: .187"(4.75mm), 2.0"(51mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.250SS/2.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN STEP LEMO CONNECTOR. HEAD DIAMETER: .250"(7.14mm), 2.0"(51mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.562/12.5WL | ROTARY PROBE 4 PIN STEP LEMO (STAVELY MINI MITE) 0.562" DIAMETER, 12.5" WORKING LENGTH 100KHZ-2MHZ Includes Test Report and Certificate of Conformance | 1 | |
| ARR-.562/6.5WL | ROTARY PROBE 4 PIN STEP LEMO (STAVELY MINI MITE) 0.562" DIAMETER, 6.5" WORKING LENGTH 100KHZ-2MHZ Includes Test Report and Certificate of Conformance | 1 | |
| ARR-1.0/10.5WL | ROTARY PROBE 4 PIN STEP LEMO (STAVELY MINI MITE) 1.00" DIAMETER, 10.5" WORKING LENGTH 100KHZ-2MHZ Includes Test Report and Certificate of Conformance | 1 | |
| ARR-1.343SE/2WL | Universal Rotary Hole Probe 1.343 inch to 1.375 inch diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 kHz - 2MHz, supplied with a 4 pin step lemo connector. Includes Test Report and Certificate of Conformance | 1 | |
| ARR-1.375SE/2WL | Universal Rotary Hole Probe 1.375 inch to 1.4375 inch diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 kHz - 2MHz, supplied with a 4 pin step lemo connector. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-1.4375SE/2WL | Universal Rotary Hole Probe 1.4375 inch to 1.50 inch diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 kHz - 2MHz, supplied with a 4 pin step lemo connector. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-1.50/10.5WL | ROTARY PROBE 4 PIN STEP LEMO (STAVELY MINI MITE) 1.50" DIAMETER, 10.5" WORKING LENGTH 100KHZ-2MHZ Includes Test Report and Certificate of Conformance | 1 | |
| ARR.150 | RECHII FIXED DIAMETER ROTARY PROBE, .150"Ø FOR RA2000 SERIES SCANNER, 100KHz-2MHz, SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.160 | RECHII FIXED DIAMETER ROTARY PROBE, .160"Ø FOR RA2000 SERIES SCANNER, 100KHz-2MHz, SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.170 | RECHII FIXED DIAMETER ROTARY PROBE, .170"Ø FOR RA2000 SERIES SCANNER, 100KHz-2MHz, SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.180 | RECHII FIXED DIAMETER ROTARY PROBE, .180"Ø FOR RA2000 SERIES SCANNER, 100KHz-2MHz, SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARS-1018NAV | NAVSHIPS Test Block - 1018 Carbon Steel, 1 1/4" x 3" x 12", Contains six 3/64" diameter drilled holes at distances of 1/8" thru 2 3/4", With Case. | 1 | |
| ASDP-.25/7L | DETACHABLE STANDARD REFLECTION SPOT PROBE. 0.25 IN. (6.3MM) DIAMETER. 5kHZ-100KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.31/7L | STANDARD REFLECTION SPOT PROBE. 0.31 IN. (7.9MM) DIAMETER. 700HZ-80KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.31/TF | STANDARD REFLECTION SPOT PROBE(STRAIGHT). 0.31"Ø (7.9MM) DIAMETER. 1KHz-50KHz. SUPPLIED WITH A TRIAX FISCHER / LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.312/1-20K | REFLECTION SPOT PROBE .312"Ø(7.85mm) TIP DIAMETER, .425"Ø(10.8mm) BODY DIAMETER. 1KHz-20KHz WITH TOP MOUNTED TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.312/2K | LOW FREQUENCY REFLECTION SPOT PROBE .312"Ø(7.85mm) TIP DIAMETER, 800Hz-20KHz WITH SIDE MOUNTED TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.312/50-500KHZ | HIGH FREQUENCY SPOT PROBE. REFLECTION .312" OD DIAMETER. 50K-500KHz, .200"Ø coil OD. TRIAX FISCHER CONNECTOR. Includes Certificate of Conformance and Test Report. | 1 | |
| ASDP-.312/500KHZ-1MHZ | HIGH FREQUENCY SPOT PROBE. REFLECTION .312" OD DIAMETER. 500KHz-1MHz, .200"Ø coil OD TRIAX FISCHER CONNECTOR. Includes Certificate of Conformance and Test Report. | 1 | |
| ASDP-.4-50H/4L | LOW FREQUENCY REFLECTION SPOT PROBE, .40"Ø DIAMETER SIDE MOUNT 4 PIN LEMO CONNECTOR 50Hz-2KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.44/7L | STANDARD REFLECTION SPOT PROBE. 0.44 IN. (11.2MM) DIAMETER. 400HZ-60KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.45/1KHZ | SURFACE SPOT PROBE, STANDARD BRIDGE .45"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 1KHZ -5KHZ. Includes Test Report and Certificate of conformance. | 1 | |
| ASDP-.470 | LOW FREQUENCY REFLECTION SPOT PROBE, .470"Ø DIAMETER SIDE MOUNT TRIAX FISCHER CONNECTOR 500Hz-30KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.5/400HZ-30K | SURFACE SPOT PROBE, STANDARD BRIDGE .500"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 400Hz-30KHz. Includes Test Report and Certificate of conformance. 9213548 | 1 | |
| ASDP-.5/7L | STANDARD REFLECTION SPOT PROBE. 0.50 IN. (12.7MM) DIAMETER. 300HZ-40KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.500/100HZ-1KHZ | LOW FREQUENCY REFLECTION SPOT PROBE, .500"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR, 100Hz-1KHz, .440"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.500/5-50Khz | LOW FREQUENCY REFLECTION SPOT PROBE, .500"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 5-50KHz, .440"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.500/550Hz-5KHz | LOW FREQUENCY REFLECTION SPOT PROBE, .500"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR, 550Hz-5KHz, .440"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.55/500HZ | SURFACE SPOT PROBE, STANDARD BRIDGE .55"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 500Hz-5KHz. Includes Test Report and Certificate of conformance. | 1 | |
| ASDP-.620 | SURFACE PROBE STANDARD BRIDGE .620" DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 300Hz-10KHz. Includes Test Report and Certificate of conformance. Olympus P/N: 9213011 | 1 | |
| ASDP-.625 | LOW FREQUENCY REFLECTION SPOT PROBE, COIL O.D. .500"Ø, OVERALL PROBE DIAMETER .625"Ø(OD) WITH TOP MOUNT TRIAX FISCHER CONNECTOR. FREQUENCY: 300HZ-10KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.625/10K | LOW FREQUENCY REFLECTION SPOT PROBE, COIL O.D. .500"Ø, OVERALL PROBE DIAMETER .625"Ø(OD) WITH TOP MOUNT TRIAX FISCHER CONNECTOR. FREQUENCY: 5KHz-20KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.625/300HZ-10K | LOW FREQUENCY REFLECTION SPOT PROBE, COIL O.D. .500"Ø, OVERALL PROBE DIAMETER .625"Ø(OD) WITH TOP MOUNT TRIAX FISCHER CONNECTOR. FREQUENCY: 300HZ-10KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.75/2K | Low Frequency Surface Spot probe, bridge, with a diameter of .75 inch (19.0 mm) and a operating range of 100 Hz - 2 kHz Supplied with a Top Mounted Triax Fischer / LEMO Connector. Model: SL/100HZ-2KHZ/.75". Test Report and Certificate of Conformance... | 1 | |
| ASDP-.75/2K-7L | Low Frequency Surface Spot probe, bridge, with a diameter of .75 inch (19.0 mm) and a operating range of 100 Hz - 2 kHz Supplied with a Top Mounted 7-pin LEMO Connector. Model: SL/100HZ-2KHZ/.75". Test Report and Certificate of Conformance provided... | 1 | |
| ASDP-.980/100HZ | LOW FREQUENCY SPOT PROBE REFLECTION .980" DIAMETER(OD) TOP MOUNTED TRIAX FISCHER CONNECTOR. FREQUENCY: 100HZ-500HZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-1.0/300HZ | SURFACE SPOT PROBE, STANDARD BRIDGE 1.0"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 300HZ. Includes Test Report and Certificate of conformance. | 1 | |
| ASDP-1.2/100HZ | LOW FREQUENCY SPOT PROBE REFLECTION 1.200"Ø DIAMETER WITH SIDE MOUNTED TRIAX FISCHER CONNECTOR. FREQUENCY: 100HZ-700HZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-1.250/100HZ | LOW FREQUENCY SPOT PROBE REFLECTION 1.200"Ø DIAMETER WITH SIDE MOUNTED TRIAX FISCHER CONNECTOR. FREQUENCY: 100HZ-700HZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-6.746M/20-40K | LOW FREQUENCY SPOT PROBE REFLECTION 6.746 MM DIAMETER(OD) TOP MOUNT 7 PIN LEMO CONNECTOR. FREQUENCY: 20-40KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-9.128M | LOW FREQUENCY SPOT PROBE REFLECTION 9.128 MM DIAMETER(OD) TOP MOUNT 7 PIN LEMO CONNECTOR. FREQUENCY: 1-4KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ASI-203 | Altimeter Test Set | 2 | |
| ASPN-475-6/6MHZ | RIGID SURFACE PROBE 45° DEGREES .750 CRANK, 6.0" LONG .092" Ø DIAMETER SHAFT, ABSOLUTE SHIELDED 6MHz SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.125 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .125"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.156 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .156"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.187 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .187"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.375 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .375"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.437 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .437"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.500 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .500"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.562 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .562"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.625 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .625"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.687 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .687"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.750 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .750"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATI520CTK | PULL TESTER, CABLE TERMINAL (1/16 THRU ¼ INCH DIAMETER CABLES) | 5 | |
| ATI520HTK | PULL TESTER, CABLE TERMINAL (1/4 THRU 3/8 INCH DIAMETER CABLES) | 5 | |
| ATPN-45-8 | RIGID SURFACE PROBE, 45° .125" DIAMETER .500" DROP TRIAX FISCHER CONNECTOR 50-500KHZ.8.0" LONG Includes Test Report and Certificate of Conformance .. | 1 | |
| ATPNR-903-6 | Handheld Detachable Pencil Tip Probe 90° Degrees, ABS Shielded, Reflection, Diameter: 0.125in (3mm); Tube ID, 0.030" inch (0.8mm) Drop, Frequency: 50-500 kHz, 6.0in (152mm); Supplied with a Triaxial Fischer Connector. Includes Test Report and Certifica | 1 | |
| AUR-.083SS/3.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .083"(2.11mm)Ø, 76.2mm(3.0") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.093SS/55MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, HEAD DIAMETER = .093"Ø(2.36mm), (2.16")55mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AUR-.099SS/3.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .099"(2.51mm)Ø, 76.2mm(3.0") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.115SS/3.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .115"(2.92mm)Ø, 76.2mm(3.0") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.125SS/1.1WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .125"(3.175mm)Ø, 27.94mm(1.1") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.156SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .156"(3.96mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.171SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .1719"(4.37mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.185SS/15MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED. HEAD DIAMETER: .185"Ø(4.70mm), 15mm(.591") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.187SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .187"(4.75mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.203SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .203"(5.16mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.218SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .21875"(5.54mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.234SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .234"(5.94mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.247SS/15MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED. HEAD DIAMETER: .247"Ø(6.27mm), 15mm(.591") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.250SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .250"(6.35mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.281SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .281"(7.14mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.312SS/3WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .312"Ø(7.92mm), (3.0")76.2mm WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.312SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .312"(7.92mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.562SS/65MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .562"(14.27mm) 65mm WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.625SS/65MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, 4 PIN FISCHER CONNECTOR. PROBE DIAMETER: .625"Ø (5/8")(15.90mm) WITH A 2.56"(65mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.687SS/75MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .687" (11/16") 2.95"(75mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-1.75SE/2.0WL | Universal Rotary Hole Probe 1.75 inch (44.45 mm) to 1.812 inch (46.12 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3MHz Fischer 4 pin connector, reflection differential coil configuration Includes Test Repor... | 1 | |
| AUR-10.2MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 10.2mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance | 1 | |
| AUR-10.7MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 10.7mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance | 1 | |
| AUR-11.7MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .461"Ø(11.7mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-12.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .472"Ø(12.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-12.0MSS/82MWL-1 | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 50KHz-2.5MHz SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .472"Ø(12.00mm), 3.22"(82mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-12.6MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, 12.6mmØ DIAMETER, 35mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-12.9MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, 12.9mmØ DIAMETER, 35mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-13.0MSS/35MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .512"Ø(13.0mm), 1.38"(35mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-13.0MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .512"Ø(13.0mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-13.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .512"Ø(13.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-13.1MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 13.1mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance | 1 | |
| AUR-13.3MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, 13.3mmØ(.524") DIAMETER, 35mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-13.4MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .528"Ø(13.4mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-13.5MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 13.5mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance | 1 | |
| AUR-13.8MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .543"Ø(13.8mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-13.9MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 13.9mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance | 1 | |
| AUR-14.0MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .551"Ø(14.0mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-14.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .551"Ø(14.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-14.2MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, 14.2mmØ DIAMETER, 35mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-14.4MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .567"Ø(14.4mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-14.6MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 14.6mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-15.0MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .591"Ø(15.0mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-15.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .591"Ø(15.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-15.1MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 15.1mmØ(.594") DIAMETER, 35mm(1.38") WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-15.1MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 15.1mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-15.4MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .606"Ø(15.4mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-15.5MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 15.5mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-15.6MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .614"Ø(15.6mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-15.8MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 15.8mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-16.0MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .630"Ø(16.0mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-16.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .630"Ø(16.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-16.1MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .634"Ø(16.1mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-16.2MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 16.2mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-16.3MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .642"Ø(16.3mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-16.6MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE, 16.6mmØ DIAMETER, 100KHz-2MHz, 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-16.9MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .665"Ø(16.9mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-17.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .669"Ø(17.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-18.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .709"Ø(18.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-19.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .748"Ø(19.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-2.00SE/2.0WL | Universal Rotary Hole Probe 2.00 inch (50.80 mm) to 2.062 inch (52.37 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3MHz Fischer 4 pin connector, reflection differential coil configuration Includes Test Repor... | 1 | |
| AUR-20.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .787"Ø(20.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-21.0MSS/35MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .827"Ø(21.00mm), 1.38"(35mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-21.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .827"Ø(21.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-22.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .866"Ø(22.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-22.6MSS/51MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR.57/64"Ø (22.61mm) DIAMETER HEAD.Includes Test Report and Certificate of Conformance... | 1 | |
| AUR-4.0MSS/35MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .157"Ø(4.00mm), 1.38"(35mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-4.2MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .165"Ø(4.20mm), 50mm WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-4.9MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .192"Ø(4.90mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-5.0MSS/82MWL-1 | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 50KHz-2.5MHz SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: 5.00mm (.197"Ø), 82mm (3.22") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-5.6MSS/51MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .220"Ø(5.60mm), 2.0"(51mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 or Ether ARD002 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-7.0MSS/35MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .276"Ø(7.00mm), 1.38"(35mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificat... | 1 | |
| AUR-9.9MSS/35MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .390"Ø(9.9mm), 35mm(1.38") WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-9.9MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .390"Ø(9.9mm), 50mm WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate of Conformance. | 1 | |
| AURF-.156SS/2.25WL | Stainless Steel Universal Rotary Bolt Hole Probe, Shielded,. -.156" diameter. 2.25" Working Legth. Operating Frequency: 200 KHz - 3 MHz Supplied with a. 4 Pin Fischer connector. Includes Test Report and Certificate of Conformance | 1 | |
| AURF-.375SS/2.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 200KHz-2MHz FERRITE SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .375"(9.5mm)Ø, 2.0"(51mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB-.324SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING SCANNER PROBE, .324"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.343SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .343"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.406SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .406"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.437SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .437"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.468SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .468"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.500SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .500"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.531SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .531"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.562SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .562"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFBSE-5.5M/40MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 40mm(1.57") WORKING LENGTH 100KHZ-2MHZ. EXPANDABLE PROBE HEAD DIAMETER= 5.5mm(0.2165Ø - APPROXIMATELY 6.91mmØ 0.272"Ø. Includes Test Report and C... | 1 | |
| AURFBSE-6.0M/51MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 51mm(2.0") WORKING LENGTH 100KHz-2MHz. EXPANDABLE PROBE HEAD DIAMETER= 8.0mm(0.236"Ø) - 10.0mmØ(.315"Ø). Includes Test Report and Certificate of Con | 1 | |
| AURFBSE-8.0M/51MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 51mm(2.0") WORKING LENGTH 100KHz-2MHz. EXPANDABLE PROBE HEAD DIAMETER= 8.0mm(0.315"Ø) - 10.0mmØ(.394"Ø). Includes Test Report and Certificate of Con | 1 | |
| AURFX-.187-.75FT/4WL | UNIVERSAL FLEXIBLE ROTARY PROBE 100KHz-2MHz, 3/16"(.187")Ø FIXED DIAMETER TIP SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 4.0" WORKING LENGTH WITH A .75" LONG TIP LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFX-.218-.75FT/4WL | UNIVERSAL FLEXIBLE ROTARY PROBE 100KHz-2MHz, 7/32"(.218")Ø FIXED DIAMETER TIP SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 4.0" WORKING LENGTH WITH A .75" LONG TIP LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFX-.250-.75FT/4WL | UNIVERSAL FLEXIBLE ROTARY PROBE 100KHz-2MHz, 1/4"(.250")Ø FIXED DIAMETER TIP SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 4.0" WORKING LENGTH WITH A .75" LONG TIP LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFX-.250/.75T/4WL | FIXED DIAMETER FLEX SHAFT ROTARY PROBE,.250"Ø, 100KHz-2MHz, .750" LONG TIP, 4.0" WORKING LENGTH ( NO SLEEVE) SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFX-.375-.75FT/4WL | UNIVERSAL FLEXIBLE ROTARY PROBE 100KHz-2MHz, 3/8"(.375")Ø FIXED DIAMETER TIP SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 4.0" WORKING LENGTH WITH A .75" LONG TIP LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AX 6000 | Milliohmmeter - Bonding Tester | 3 | |
| AX5PN45-2/2M | RIGID SURFACE PROBE, 1-3MHz, 45°, .050"Ø TIP DIAMETER, .500" DROP, 2.0" LONG SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AX6000 | MILLIOHMMETER - BONDING TESTER | 3 | |
| AXPN-475-4.5/2MHZ | RIGID SURFACE PROBE 45° DEGREES .750 CRANK, 4.5" LONG .072" Ø DIAMETER TIP, ABS SHIELDED, 1-3MHz(2MHz CENTER FREQUENCY) SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AY969-00666-001 | TEST CABLE - RADIO ALTIMETER | 6 | |
| AY969-00666-002 | COM-1929 Test Cable - Radio Altimeter 737-600, -700, -800 | 2 | |
| AY969-00667-001 | COM-1929 Test Cable - Radio Altimeter 737-600, -700, -800 | 3 | |
| AY969-00668-001 | COM-1929 Test Cable - Radio Altimeter 737-600, -700, -800 | 8 | |
| AY969-00999-001 | TEST CABLE - RADIO ALTIMETER | 1 | |
| Alt-8000 | TESTSET RADIO ALTIMETER | 9 | |
| B07GXFQ52J | MULTIMETER TEST LEAD | 1 | |
| BCE14/15 | TACHOMETER TESTER | 1 | |
| BENDIX-AMT-51A | ALTIMETER TEST SET | 1 | |
| BRAKE METERING VALVE TEST UNIT | BRAKE METERING VALVE TEST UNIT, EMB-120 | 1 | |
| BT-700I | MILLIOHMETER (BONDING TESTING AND LOW RESISTANCE MEASUREMENT) | 1 | |
| BT51 | Low Resistance Ohmmeter or Bond Tester | 8 | |
| C0M1922 | TEST SET RADIO ALTIMETER | 1 | |
| C0M1929 | TEST CABLE RADIO ALTIMETER | 1 | |
| C24007-1 | TEST BOX - ELECTRIC METERS, BATTERY AND GALLEY MOD | 1 | |
| C26006-70 | RADIO ALTEMETER TEST CABLE | 12 | |
| C34005-1 | TEST CABLE - RADIO ALTIMETER | 6 | |
| C34005-16 | TEST CABLE - RADIO ALTIMETER | 10 | |
| C36001-3 | MANOMETER FOR TEST EQUIPMENT | 3 | |
| C36001-44 | MANOMETER ENG. BLEED AIR SYS. TESTER | 10 | |
| C36001-45-F | MANOMETER FOR TEST EQUIPMENT | 1 | |
| C77002 | TEST-TACHOMETER SYSTEM | 1 | |
| C77002-20 | TACHOMETER SYSTEM TESTER | 18 | |
| C77002-21 | TEST BOX-TACHOMETER SYS. | 1 | |
| CA6240 | MICRO OHMMETER INCLUDING TEST | 1 | |
| CA6524 | MEGOHMMETER (INSULATION AND CONTINUITY TESTER) | 2 | |
| CAL | TEST CABLE TENSIOMETER 3/8" | 1 | |
| CEL99-22-10-00 | RADIO-ALTIMETER SIMULATOR TEST CASE CEL99-22-10-00 | 1 | |
| CJMDX35-001 | OXYGEN FLOW METER TEST KIT | 1 | |
| COM-1922 | TEST SET - RADIO ALTIMETER | 1 | |
| COM-1929 | TEST CABLE - RADIO ALTIMETER | 1 | |
| COM-9837 | RADIO ALTIMETER TEST SET | 1 | |
| CORAS MODEL CRRC | RESISTIVITY CONTINUITY METER (BONDING TEST ) | 1 | |
| CS-300 | DIGITAL MULTIMETERCAPACITANCE TEST BOX | 1 | |
| Commercial | De-insulation Tester & Ohm Meter | 1 | |
| DL-100LB | BAOSHISHAN 100LB PUSH PULL FORCE GAUGE FORCE TEST METER FOR AIRBUS FLEET | 1 | |
| DLRO-10 | Digital Low Resistance Ohmmeter / Tester | 8 | |
| DLRO-10 HD | DIGITAL LOW RESISTANCE OHMMETER / TESTER | 2 | |
| DLRO10 | DIGITAL LOW RESISTANCE OHMMETER / TESTER | 8 | |
| DLRO10HD | DIGITAL LOW RESISTANCE OHMMETER / TESTER | 2 | |
| DPM80/2 | DIGITAL TEST METER | 1 | |
| DPS450 | RADIO ALTIMETER TEST SET | 9 | |
| DRA 707 | Radio altimeter test set | 10 | |
| DRA 707BA | TEST SET RADIO ALTIMETER | 1 | |
| DRA-707 | RADIO ALTIMETER TEST SET | 10 | |
| DRA-707(110-430-100) | TESTSET - RADIO ALTIMETER DRA-707 | 1 | |
| DRA-707B1 | TEST SET-DIGITAL RADIO ALTIMETER | 3 | |
| DRA707 | TEST SET - DIGITAL RADIO ALTIMETER | 10 | |
| DRA707B1 | TEST SET-DIGITAL RADIO ALTIMETER | 3 | |
| De-insulation Tester & Ohm Meter | De-insulation Tester & Ohm Meter | 1 | |
| E20/20 | TDR Time Domain Reflectometer Cable Tester | 1 | |
| EA 315 | TESTER LIQUIDOMETER TYPE 0-1 | 1 | |
| EEDM650C | MULTIMETER INSULATION TESTER | 1 | |
| EOPT-PRO-M-APC | EOPT-PRO-M-APC;Optimeter Fiber Tester PRO Kit F1650nm - APC | 1 | |
| ES125030-1 | ENCODING ALTIMETER/ALERTER ALYZER TEST SET | 1 | |
| ESRY 40-55M | ELOTEST Standard Rotor Y Probe, 40-55mm Diameter, 100Khz-2Mhz | 1 | |
| ESRY 5-6.5M | ELOTEST Standard Rotor Y Probe, 5-6.5mm Diameter, 100Khz-2Mhz | 1 | |
| ESRY.125-.187 | ELOTEST Standard Rotor Y Probe, .125-.187 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.156-.187 | ELOTEST Standard Rotor Y Probe, .156-.187 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.187-.250 | ELOTEST Standard Rotor Y Probe, .187-.250 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.250-.312 | ELOTEST Standard Rotor Y Probe, .250-.312 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.312-.375 | ELOTEST Standard Rotor Y Probe, .312-.375 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.375-.437 | ELOTEST Standard Rotor Y Probe, .375-.437 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.437-.500 | ELOTEST Standard Rotor Y Probe, .437-.500 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.500-.625 | ELOTEST Standard Rotor Y Probe, .500-.625 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.625-.750 | ELOTEST Standard Rotor Y Probe, .625-.750 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.750-.875 | ELOTEST Standard Rotor Y Probe, .750-.875 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.875-1.0 | ELOTEST Standard Rotor Y Probe, .875-1.0 Diameter, 100Khz-2Mhz | 1 | |
| ESRY1.0-1.125 | ELOTEST Standard Rotor Y Probe,1.0-1.125 Diameter, 100Khz-2Mhz | 1 | |
| ESRY1.500-1.625 | ELOTEST Standard Rotor Y Probe, 1.500- 1.625 Diameter, Shielded..100Khz-2Mhz | 1 | |
| ESRY1.625-1.750 | ELOTEST Standard Rotor Y Probe, 1.625- 1.750 Diameter, Shielded..100Khz-2Mhz | 1 | |
| F-112S-A-12-11N | MASS FLOW METER 0.01～0.10 PPM STATIC TEST CON | 1 | |
| F.W BELL 5170 | GAUSS TEST METER | 2 | |
| F27767000 | ELECTRONIC TEST BOX HARNESS CONTAINING A CONTROL POTENTIOMETER | 2 | |
| F65-0-3311 | ADAPTER - TEST, NOSE WHEEL STEERING METERING VALVE (SPL-5281) | 2 | |
| F70303-1 | TESTER TACHOMETER RE | 2 | |
| F72951 | WATER MANOMETER-TEST EQUIPMENT | 1 | |
| F72951-1 | Water Manometer - Test Equipment | 17 | |
| F72951–1 | WATER MANOMETER - TEST EQUIPMENT | 17 | |
| F80223-1 | TEST ASSEMBLY-RADIO ALTIMETER | 3 | |
| F80223-1, -2, -3 | TEST ASSEMBLY - RADIO ALTIMETER | 1 | |
| F80223-2 | TEST ASSEMBLY-RADIO ALTIMETER | 2 | |
| F80223-3 | TEST ASSEMBLY-RADIO ALTIMETER | 1 | |
| FD7030T-117 | WATER MANOMETER - TEST EQUIPMENT | 1 | |
| FLUKE | MULTIMETER TESTER DIGITAL | 1 | |
| FLUKE 1507 | TESTER MEGOHMMETER | 10 | |
| FLUKE 175 | DIGITAL MULTIMETER WITH TEST LEADS | 8 | |
| FLUKE 27 II | MULTIMETER - DIGITAL/ANALOG (OR EQUIVALENT METER MEETS TASK REQUIREMENTS) BREAKOUT BOX - TEST, THRUST REVERSER (FOR MIL-C-5015 AND MIL-C- 26500 TYPE CIRCULAR CONNECTOR) | 4 | |
| FLUKE 754 | TEST SET,ELECTRICAL METER | 1 | |
| FLUKE 87V | MULTIMETER TESTER | 13 | |
| FLUKE I410 | TESTER AMPMETER CLAMP-ON AC/DC AMP | 2 | |
| FLUKE-1587 FC | MEGOHMMETER INSULATION TESTER 250/1000V | 5 | |
| FLUKE-77-4 | MULTIMETER - DIGITAL/ANALOG (OR EQUIVALENT METER MEETS TASK REQUIREMENTS) BREAKOUT BOX - TEST, THRUST REVERSER (FOR MIL-C-5015 AND MIL-C- 26500 TYPE CIRCULAR CONNECTOR) | 4 | |
| FLUKE114 | MULTI-METER – SELCAL ADJ/TEST | 2 | |
| FLUKE1507 | INSULATION TESTERS - MEGOMETER | 10 | |
| FLUKE27II | TEST SET,MULTIMETER | 4 | |
| FLUKE8020A | MULTI-METER – SELCAL ADJ/TEST | 1 | |
| FLUKE87 | MULTIMETER TESTER (FLUKE) 87V | 5 | |
| FLUKE87V | MULTIMETER TESTER | 13 | |
| FOPT-PRO-M-APC | FOPT-PRO-M-APC;Optimeter Fiber Tester PRO Kit F1650nm - APC | 1 | |
| FOPT-PRO-M-APC-DEMO | FOPT-PRO-M-APC-DEMO;Optimeter Fiber Tester PRO Demo Kit F1650nm - APC | 1 | |
| FOPT-PRO-MN-APC | FOPT-PRO-MN-APC;MetroNet Optimeter Fiber Tester PRO Kit F1650nm - APC | 1 | |
| FOPT-PRO-MOB | FOPT-PRO-MOB;Optimeter Fiber Tester PRO Kit F1650nm - MOBILITY | 1 | |
| FSNHYSMA3000 | TEST HOSE FOR MANOMETER-800MM | 1 | |
| G22001 | TEST EQUIP -0 LOW RANGE RADIO ALTIMETER SYSTEM | 1 | |
| G22001-166 | TEST EQUIPMENT - LOW RANGE RADIO ALTIMETER (LRRA) SYSTEM | 1 | |
| G22001-167 | TEST EQUIPMENT - LOW RANGE RADIO ALTIMETER (LRRA) SYSTEM | 1 | |
| G22001-168 | TEST EQUIPMENT - LOW RANGE RADIO ALTIMETER (LRRA) SYSTEM | 1 | |
| G22001-199 | TEST EQUIPMENT - LOW RANGE RADIO ALTIMETER (LRRA) SYSTEM | 1 | |
| G26008 | TEST EQPT- NON-METERED DISCHARGE TUBING, CARGO | 1 | |
| G26008-13 | TEST EQUIPMENT - NON-METERED DISCHARGE TUBING, CARGO FIRE EXTINGUISHER | 1 | |
| GM07 | GAUSSMETER ULTRASONIC TEST SET | 1 | |
| GP20005 | RADIO ALTIMETER TEST SET | 1 | |
| GS47537 | ELECTRONIC TEST BOX HARNESS CONTAINING A CONTROL POTENTIOMETER | 1 | |
| GSB2400012 | TESTER INSULATION RESISTANCE (OHM- METER 250/1000VDC) | 1 | |
| GSB2527002 | MANOMETER TEST SET | 1 | |
| GSB3444001 | COLLINS ALTIMETER 4000 TEST CABLES | 2 | |
| GSE-361 | RADIO ALTIMETER TEST HARNESS, | 1 | |
| GSE3100430 | G-METER TEST SET | 1 | |
| GSE3400729 | TEST SET, ELECTRONIC ALTIMETER | 1 | |
| GSE361 | RADIO ALTEMETER TEST HARNESS | 1 | |
| H-1000-TYPE-A | REX GAUGE MINI-DIAL HARDNESS TESTER/DUROMETER TYPE A | 1 | |
| H1000-A | DUROMETER (HARDNESS TESTER) | 1 | |
| H21944 | TACHOMETER TEST BENCH | 1 | |
| H310A | HI-POT TESTER AND MEGOHMETER FOR TESTING | 1 | |
| H337 | HOWEELL H337 ENGINE TEST SET - ROTOR AND GASPRODUSER TACHOMETER | 1 | |
| H395 | TESTER - PYROMETER AND THERMOCOUPLE | 2 | |
| HDV2A | TEST SET – MILLI VOLTMETER | 1 | |
| HFM-D-300 | MASS FLOWMETER REFERENCED TO 21.1 °C @ 760 MMHG CALIBRATED FOR OXYGEN (0 - 6 LPM) - REGULATOR FLOW ACCURACY TESTING AND ADJUSTMENT | 1 | |
| HI-1501 | METER, MICROWAVE OVEN LEAK TEST | 1 | |
| HP85047A | S PARAMETER TEST SET | 1 | |
| HPT-200B | Tensile Tester - Portable 200# Load Cell - New Meter | 2 | |
| HSK6263-1 | TEST KIT (MANOMETER) | 35 | |
| HXA-13806-1 | MLG WHEEL TACHOMETER DRIVING TOOL (ANTI SKID TEST) | 1 | |
| IG08R3 | AIR FLOW METER TO UNISON IGNITION TEST SYSTEM | 1 | |
| IPA9107B | BRAKE FORCE METER W TRL TEST | 1 | |
| IR4056-20 | MEGOHMETER-INSULATION TESTER | 1 | |
| JND-007 | SURFACE RESISTANCE METER RESISTIVITY TESTER | 1 | |
| K28006-1 | TESTER METER LED KIT | 4 | |
| KTRD 1105 | TESTER - PYROMETER | 1 | |
| Keithly Model 580 | Micro-ohmmeter (resistance tests) | 1 | |
| LHT-5502026A00 | RADIO ALTIMETER TEST CABLE KIT | 1 | |
| LR2065-HDCC | Test Leads 10 meter long with Heavy Duty Crocodile Clip | 1 | |
| LRA-2 | Radar Altimeter and Indicator Test Panel | 1 | |
| M1 | MILLIOHMETER, BONDING TESTER | 5 | |
| M227G | TESTER MILLIOHMMETER | 1 | |
| MCSP-004 | MANUAL COUNTER SINK PROBE 100° DEGREES 500KHz-2MHz WITH TRIAX FISCHER CONNECTOR .125"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| METRA HIT 27I | MILLIOHMETER (BONDING TESTING AND LOW RESISTANCE MEASUREMENT) | 1 | |
| MIC4B | MICROMETER TEST GAUGE | 1 | |
| MIT40X-EN | MEGOHMMETER / INSULATION RESISTANCE TESTERS | 1 | |
| MIT420/2 | MEGOHMMETER / INSULATION RESISTANCE TESTERS | 3 | |
| MODEL 36 | TESTER AMPMETER CLAMP-ON | 1 | |
| MODEL 3800 | TACHOMETER TESTER | 1 | |
| MODEL 43 | METER - RF POWER MODEL 43P , 43PENVOY TEST TOOL | 12 | |
| MODEL 885 | LCR/ESR METER TESTER | 2 | |
| MODEL3800 | MODEL 3800 TACHOMETER TESTER | 1 | |
| MS2026A | TOOL ALTIMETERS TEST | 2 | |
| MS2026AMS2025BMS2026C | TOOL ALTIMETERS TEST | 1 | |
| MS2026C | TOOL ALTIMETERS TEST | 1 | |
| MV8027-5-02T | DOWTY ROTEL 9146 POTENTIOMETER TEST BOX (TYPE 9146) | 1 | |
| Megger Model BM312 | Mego-ohmmeter (resistance tests) | 1 | |
| NAV-401L | RADIO ALTIMETER TESTER NAV/VOR/ILS/GS/MKR RAMP TESTER | 13 | |
| NAV-402 | NAV-402 RADIO ALTIMETER TESTER | 1 | |
| NDT1041 | BOEING REFERENCE STANDARD 737 PT6 51-00-00 PROCEDURE 19, 0.250” DIAMETER. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1042 | BOEING REFERENCE STANDARD 737 PT6 51-00-00 PROCEDURE 19, 0.313” DIAMETER. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1043 | BOEING REFERENCE STANDARD 737 PT6 51-00-00 PROCEDURE 19, 0.375” DIAMETER. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1043CS | BOEING COUNTERSINK REFERENCE STANDARD 737 PT6 51-00-00 PROCEDURE 19, 0.375” DIAMETER 100° COUNTERSINK HOLE. MATERIAL: 43404340M STEEL. SIZE: 2.0" X .375" THICK( ROUNDSQUARE. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT1044 | BOEING REFERENCE STANDARD 737 PT6 51-00-00 PROCEDURE 19, 0.438” DIAMETER. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1045 | BOEING REFERENCE STANDARD 737 PT6 51-00-00 PROCEDURE 19, 0.500” DIAMETER. Includes Test Report and Certificate of Conformance. | 2 | |
| NOTE: DRA707B1 includes the DRA and some cables *see additional note* | TEST SET-DIGITAL RADIO ALTIMETER | 1 | |
| P15589M1-3 | TESTER- VIBRO METER | 6 | |
| PJ6301 | HIGH ACCURACY TESTER BTMU THERMOMETER CALIBRATOR | 1 | |
| PM6303A | TOOL: TESTER,RCL METER 1KH | 3 | |
| PM81185 | 1 OFF RADIO ALTIMETER TEST SYSTEM CABLE | 1 | |
| PSD60-2R | FUEL METERING SYSTEM TESTER | 27 | |
| PSD747-2-01 | 768;PSD747-2-01 FQ/DENSITOMETER TESTE | 1 | |
| PT.24 | SUFACE PROBE 90° DEGREES .063" DROP .100"Ø SHAFT DIAMETER BENT 15° DEGREES, 10.0" LONG WITH TRIAX FISCHER CONNECTOR. FREQUENCY 500KHz-2MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| PT.53 | LOW FREQUENCY REFLECTION SPOT PROBE .750"Ø DIAMETER, 2.0" TALL WITH TRIAX FISCHER CONNECTOR. 100Hz-10KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| PWA 32935 | FUEL FLOW METER (TEST DOMMY) | 1 | |
| PWA6507 | FLOWMETER, LEAK TEST | 1 | |
| PWA85703 | ACCELEROMETER & LEAD ASSEMBLY - "A" FLANGE & "P" FLANGE PICKUP ENGINE TEST | 1 | |
| Q21955020 | ELECTRONIC TEST BOX HARNESS CONTAINING A CONTROL POTENTIOMETER | 1 | |
| QB18 | TEST SET STATIC DISCHARGER (MEGOHMMETER) | 5 | |
| QCT-1000-10M/130WL | Equivalent to SPO-5000-10mm. Includes test report. 10mm diameter, Absolute coil. *130mm working length*. | 1 | |
| RADIO ALTIMETER TEST SET PART | RADIO ALTIMETER TEST SET 110-0430-100-02 | 1 | |
| RADIO ALTIMETER TEST SET PART NUMBER 110-0430-100-02 | RADIO ALTIMETER TEST SET 110-0430-100-02 | 1 | |
| RLP-UR101GT-.187-0.218 | ROTATING PROBE FOR HFEC TESTING ON RIVET HOLE DIAMETER 0.187"-0.218" | 1 | |
| RLP-UR101GT-.312-0.375 | ROTATING PROBE FOR HFEC TESTING ON RIVET HOLE DIAMETER 0.312"-0.375" | 1 | |
| ROTOL 9064 | POTENTIOMETER SETTING TEST BOX ( DOWTY - ROTOL 9064) | 1 | |
| S820E | TEST TOOL RADIO ALTIMETER | 2 | |
| SIM-530 | RADIO ALTIMETER TEST SET | 4 | |
| SIM530 | TEST SET - RADIO ALTIMETER | 4 | |
| SS193507 | S AND T METER / TEST TIP CARDS | 1 | |
| STD-1179 | TESTER - PYROMETER | 1 | |
| STS-170-3001 | POTENTIOMETER TEST BOX | 1 | |
| STS170301 | POTENTIOMETER TEST BOX | 1 | |
| T-27321 | TEST SET, TORQUE METER GEAR TRAIN | 1 | |
| T-30C | RADIO ALTIMETER TESTER NAV/VOR/ILS/GS/MKR RAMP TESTER | 6 | |
| T1351956100000 | ENGINE PARAMETER TEST SET | 1 | |
| T27321 | Test set, Torque Meter Gear Train | 1 | |
| T3022296 | METER TEST SET | 1 | |
| T4289 | Test Fixture Potentiometer | 1 | |
| T477W | BONDING METER TESTER W/PISTOL | 12 | |
| T5-2002-105-00 | CABLE TENSIOMETER - TEST | 4 | |
| T5-8005-110-00 | TESTER, CABLE TENSIOMETER | 15 | |
| T91787 | Test Stand-Tachometer | 1 | |
| TDR1000/3 | Metallic Time-Domain Reflectometer TDR Cable Tester | 1 | |
| TDS-3 | PORTABLE TDS-3 METER WATER QUALITY PURITY TESTER DIGITAL PPM, BATTERY INCLUDED. | 3 | |
| TE28/1 | 3 METER CABLE AND TEST PROBE | 3 | |
| TE34-6594 | ADC POTENTIOMETER TESTER | 1 | |
| TE65B88745 | TEST SET - FLOWMETER HYDRAULIC SYSTEM LEAKAGE | 1 | |
| TE9/JE | 3 METER CABLE BIPOLAR TIPS TEST PROBE 3 PINS JAEGGER CONNECTOR TO THE RCP2A | 1 | |
| TEEQ01-9599-607-11511 | RADIO ALTIMETER TEST SET.CIVILIAN | 1 | |
| TEK-3005EM-6.1M | Flexible Shaft Scanner Probe, 6.1mm Diameter, A320 PT6 53-31-50 PG623, Elotest Mini, 100KHz-2MHz | 1 | |
| TEK-3005EM-6.1M/SS | Flexible Shaft Scanner Probe, 6.1mm Diameter, A320 PT6 53-31-50 PG623, Elotest Mini Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005EM-7.8M | Flexible Shaft Scanner Probe, 7.8mm Diameter, A320 PT6 53-31-50 PG623, Elotest Mini, 100KHz-2MHz | 1 | |
| TEK-3005EM-7.8M/SS | Flexible Shaft Scanner Probe, 7.8mm Diameter, A320 PT6 53-31-50 PG623, Elotest Min Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005EM-9.3M/SS | Flexible Shaft Scanner Probe, 9.3mm Diameter, A320 PT6 53-31-50 PG623, Elotest Min Stainless Steel, 100KHz-2MHz | 1 | |
| TES9225 | RADIO ALTIMETER TEST SET | 1 | |
| TEST0608H1 | TERMO HYGROMETER - TESTO 608-H1 | 3 | |
| TESTER REFLECTUM | REFLECTOMETER TEST | 1 | |
| TESTO 845 | INFRARED THERMOMETER, TESTO 845 | 1 | |
| TK−16DS | Kit − Fiber Optic Test Meter | 1 | |
| TL71 | TEST LEAD FOR MULTIMETER | 2 | |
| TL80A-1 | MULTIMETER TEST LEAD SET | 1 | |
| TLK35BA | 1 OFF ALTERMETER TEST SET | 1 | |
| TP38 | TEST PROBE - MULTIMETER, INSULATED SLIM REACH | 4 | |
| TPI126 | METER-TEST LEADS MANUAL | 1 | |
| TRT SIM-530 | RADIO ALTIMETER TEST SET | 1 | |
| TSF31T-31001-4 | TEST SUPPORT FIXTURE - ACCELEROMETER 3 AXIS SIMULATOR | 1 | |
| TT-ONXDSL-MULTI-SP | TT-ONXDSL-MULTI-SP;Self-Paced - ONX-580 Multimeter Testing Overview - 13 minutes | 1 | |
| TTC2600 | TENSIOMETER TESTING KIT | 1 | |
| TTU-27/E | TACHOMETER INDICATOR GENERATOR TEST SET | 1 | |
| TTU-27E | TACHOMETER INDICATOR GENERATOR TEST SET | 1 | |
| UT801-4 | TEST SET EVM AND ACCELEROMETER SYSTEMS | 1 | |
| W-WH100 | Bowers W-WH100 Webster Type Portable Hardness Tester Aluminium Alloy Thickness Max 6 Diameter Min 10mm | 1 | |
| W-WH110 | Bowers W-WH110 Webster Type Portable Hardness Tester Aluminium Alloy Thickness Max 13 Diameter Min 10mm | 1 | |
| W-WH120 | Bowers W-WH120 Webster Type Portable Hardness Tester Aluminium Alloy Thickness Max 8 Diameter Min 6mm | 1 | |
| W-WH140 | Bowers W-WH140 Webster Type Portable Hardness Tester Brass in Hard/Half Hard State Super-Hard Aluminium Alloy Thickness Max 8 Diameter Min 6mm | 1 | |
| W-WH160 | Bowers W-WH160 Webster Type Portable Hardness Tester Soft Brass Pure Copper Thickness Max 8 Diameter Min 6mm | 1 | |
| W-WH170 | Bowers W-WH170 Webster Type Portable Hardness Tester Cold-Rolled Steel Sheet Stainless Steel Thickness Max 8 Diameter Min 6mm | 1 | |
| W0046 | Ionic Systems TDS 999 Test Meter | 2 | |
| WS200-U1 | FUEL METERING TEST STAND | 1 | |
| X11-P001 | MANOMETER TO TEST HYDRAULIC PRESSURE | 1 | |
| X11-P002 | MANOMETER TO TEST PRESSURE ON THE ACCUMULATOR | 1 | |
| YEH-100 | MANOMETER VACUUM TOILET-LEAK TESTER | 1 | |
| 110-0430-100-02 | TEST SET - RADIO ALTIMETER (COM-1922) | 5 | |
| ALT8000 | DIGITAL RADIO ALTIMETER TEST SET | 9 | |
| H306B-A | HIPOT TESTER & MEGOHMMETER | 1 | |
| AN2179 | NEEDLE FOR MULTIMETER TEST PROBE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
