| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 23055812 | TUBES | 3 | |
| PWC37771B | TUBES | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 04-83 | Line Clamp Pliers (For use with: Clamps or studs anchored on) (Add to cart: Add To Cart) (For use with: Tubes or wires clamped togethe) (Add to cart: Add To Cart) | 1 | |
| 18C1612 | TUBES SET, GUIDE – INSPECTION | 1 | |
| 1C6208G03 | FIX SET-POS TUBES TMF | 1 | |
| 2001380 | Helicopter towbar for helicopters up to 3200 lbs. with 2" to 3-1/4" skid tubes. | 1 | |
| 2001381 | Helicopter towbar is designed to fit the 2" rings on the skid tubes on Bell 212, 412, 429, UH-1, AH-1 | 1 | |
| 2001382 | Military/civilian helicopter towbar for BELL UH-1, 205, 212, 412 Types.Designed for one man operation. This tow bar is designed for the Bell Helicopters with the 4" skid tubes and 2" tow rings. This towbar eliminates the need for a man on the stinger. Th | 1 | |
| 2001396 | Hydraulic helicopter ground handling wheels for Bell 214ST and other military aircraft.The 002105 are caster wheels for helicopters with fitting on the forward ends of the skid tubes.Specifications: Bell 214ST and other military aircraft Skid tube dia. 4. | 1 | |
| 23005027 | FIXTURE, COMBUSTION CROSSOVER TUBES & IGNITION FERRULE REWORK | 1 | |
| 201522267 | SLIDING TUBES | 1 | |
| 201522281 | SLIDING TUBES | 1 | |
| 2024444-2 | TRANSFER TUBE PULLER (REMOVES TRANSFER TUBES FROM LUBE PUMP) | 1 | |
| 2024444-3 | TRANSFER TUBE PULLER (ASSIST REMOVAL OF TRANSFER TUBES FROM GENERATOR FILTER) | 1 | |
| 204-021 | ENGINE AREA/MID-CABIN COVER, extends down to crosstubes | 3 | |
| 204-024 | INSULATED ENGINE AREA/MID-CABIN COVER, extends down to crosstubes | 1 | |
| 212-102 | ENGINE AREA/MID-CABIN COVER, extended down to cross tubes | 1 | |
| 269-48030-0000L | ATR WING TANK BORESCOPE KIT (INCL GUIDE TUBES) | 1 | |
| 2C14718G02 | PULLER/PUSHER, AIR TUBES ‐ STAGE 2 HPT | 2 | |
| 2C14856G01 | WRENCH SET, SPANNER - EXTERNAL TUBES | 6 | |
| 2C6081G02 | WRENCH SET-R/I FUEL MANIFOLD TUBES | 1 | |
| 2C6352G02 | WRENCH SET, EXT TUBES | 2 | |
| 2C6352G06 | WRNCH SET EXT TUBES | 4 | |
| 2C6623 | PULLER - AIR TUBES | 1 | |
| 2PRE65B94600 | PROTECTIVE SHIELD - COOLING TUBES, CF6-50 ENGINE TURBINE | 3 | |
| 316S.S | GAUGE FOR NITROGEN TUBES TROLLEYS (SEMMCO). | 1 | |
| 35-92052-0003 | GUIDE TUBES | 1 | |
| 3862148-1 | Transfer Tubes | 1 | |
| 3862149-1 | TRANSFER TUBES | 6 | |
| 4013272-804P03 | GUIDE TUBES | 1 | |
| 412-102 | ENGINE AREA/MID-CABIN COVER, extend down to cross tubes | 1 | |
| 412-103 | INSULATED ENGINE AREA/MID-CABIN COVER, extends down to cross tubes | 1 | |
| 458481 | KIT - SMOKE TUBE, VENTILATION (KIT INCLUDES SIX TUBES) (MINE SAFETY APPLIANCES CO.) | 7 | |
| 5100S157 | DEICER BOOT PRIMER KIT 5100S157 (4 GLASSTUBES OF 706075 PRIMER SOLUTION ) -PRIMER KIT | 1 | |
| 642-5658-505 | DUCTS TUBES HOSES | 1 | |
| 67020X | EXTENSION TUBES | 1 | |
| 6799708 | Fixture â Alignment, Inner Combustion Chamber Oil Tubes | 2 | |
| 460007271 | TUBESPAN | 9 | |
| 856A1022G03 | WRENCH AIR TUBES | 13 | |
| 856A1351P01 | GUIDE TUBES | 15 | |
| 856A1380G01 | Puller, Outer Air Tubes-LPTN Assy | 7 | |
| 856A2388G02 | Rings,assy/disassy-lpt air cooling tubes and manifolds | 1 | |
| 856A2397G01 | TOOLCHECKING, AXIAL POSITION - CENTER VENT TUBESUPPÖRTS (CHECKING TOOL) | 4 | |
| 856A2754G01 | PINS, GUIDE - NO. 1 AND NO. 2 BEARING TUBES (GUIDE PINS) | 11 | |
| 856A2909G01 | GUIDE PINS - N1/2 BRG TUBES | 3 | |
| 856A2921G01 | Template, Locating - No. 1 and No. 2 Bearings Oil Supply Tubes (locating template) | 7 | |
| 856A2940G01 | RINGS, ASSY/DISASSY - LPT AIR COOLING TUBES AND MANIFOLDS | 2 | |
| 856A3330G01 | SEAL FITTING AGB TGB OIL NIPPLES & TUBES | 12 | |
| 856A3754G01 | RINGS, ASSY/DISASSY - LPT AIR COOLING TUBES AND MANIFOLDS | 4 | |
| 856A5611 | FIXT WELD OIL TUBES OF TRF | 1 | |
| 856A5611G02 | FIXTURE WELDING OIL TUBES OF TURBINE FRAME | 2 | |
| 856A6748G01 | FIXT WELD OIL TUBES OF TRF | 1 | |
| 8813152000 | WRENCH FOR THE REAR BEARING TUBES | 2 | |
| 8C2612 | GUIDE TUBES - BORESCOPE INS | 1 | |
| 956A1603 | GUIDE TUBES, BORESCOPE | 1 | |
| 956A1603G01 | GUIDE TUBES, BORESCOPE | 5 | |
| 956A1603G03 | GUIDETUBES - BORESCOPE | 1 | |
| 956A3092 | FIXTURE - ALIGNMENT - OIL TUBES | 1 | |
| 956A3092G02 | Fixture,alignment-oil tubes | 1 | |
| 956A6330G01 | Rings assy disassy lpt air cooling tubes and manifolds | 1 | |
| 956A6845 | FIXTURE - POSTIONNING - TUBES BEARING SUPPORT 1/2 | 1 | |
| 956A6845G01 | Fixture,Postionning Of Tubes-Bearing Support 1/2 Gabarit Positionement Destubes | 1 | |
| 956A7647 | SET - TORQUE - TURBINE REAR FRAME OIL TUBES | 1 | |
| 956A8080G01 | BORESCOPE GUIDE TUBES | 2 | |
| 956A8528 | PROTECTOR - TUBES - LPT REAR FRAME | 1 | |
| 956A8528G01 | Protector-tubes,lpt rear frame | 1 | |
| 956A8839 | FIXTURE - POSITIONING - TUBES - 1 & 2 BEARING SUPPORT | 1 | |
| 956A8839G01 | Fixture positioning tubes 1&2 bearing support | 1 | |
| ATC4 | MEYER HYDRAULICS ATC-4 Extension Tube Cap, For A6 Jack and Tubes | 2 | |
| B0R0SC0PEGUIDE1 | PW120 SERIES ENGINE GUIDE TUBES | 1 | |
| B0R0SC0PEKIT5PARTB | TUBES & VIDEO GOGGLES USE WITH PARTA | 1 | |
| B0RESC0PEGUIDEKIT | CFM56-7B BORESCOPE HPT GUIDE TUBES | 1 | |
| BCIT-500 | PITOT COVER (tubes from strut, not in wing) | 1 | |
| BCIT-501 | PITOT COVER (CARD STYLE, tubes from strut, not in wing) | 1 | |
| BLEEDTUBES | BRAKE BLEED TUBES TOOL | 1 | |
| BORESCOPEGUIDE5 | PW 120 ENGINE GUIDE TUBES | 1 | |
| BORESCOPEKIT5PARTB | TUBES AND VIDEO GOGGLES FOR USE WITH PART A | 1 | |
| BR2-PLUS | GREASE, M-PURPOSE E.P. - IN TUBES | 1 | |
| C130-187 | PITOT COVERS (Large Pitot Tubes) (one each side) (set of 2) | 1 | |
| C27022-1 | CLAMP SET TE FLAP TORQUE TUBES | 16 | |
| C680-010 | COCKPIT/NOSE COVER, doesn't cover Pitot tubes | 1 | |
| C680-020 | COCKPIT/NOSE COVER, also covers Pitot tubes | 1 | |
| C680-030 | EXTENDED COCKPIT/NOSE/DOOR COVER, covers Pitot tubes | 1 | |
| C680-805 | TRAVEL COVER, Light Weight Travel Cockpit/Nose Cover, doesn't cover Pitot tubes | 1 | |
| C680-810 | TRAVEL COVER, Light Weight Travel Cockpit/Nose/Door Cover, also covers Pitot Tubes | 1 | |
| C680A-010 | COCKPIT/NOSE COVER, doesn't cover Pitot tubes | 1 | |
| C680A-020 | COCKPIT/NOSE COVER, also covers Pitot tubes | 1 | |
| C680A-030 | EXTENDED COCKPIT/NOSE/DOOR COVER, covers Pitot tubes | 1 | |
| CH31801 | SHORT-TERM DETECTION TUBES | 1 | |
| CITX-010 | COCKPIT/NOSE COVER, covers Pitot tubes | 1 | |
| CITX-800 | TRAVEL COVER, Light Weight Travel Cockpit/Nose Cover, covers Pitot tubes | 1 | |
| CJ3-030 | COCKPIT/NOSE COVER doesn't cover nose pitot tubes | 1 | |
| CJ3-031 | COCKPIT/NOSE COVER covers nose pitot tubes | 1 | |
| CJ3-800 | TRAVEL COVER, Light Weight Travel Cockpit/Nose Cover, doesn't cover nose pitot tubes | 1 | |
| CXL-010 | COCKPIT/NOSE COVER, also covers Pitot tubes | 1 | |
| CXL-805 | TRAVEL COVER, Light Weight Travel Cockpit/Nose Cover, also covers Pitot tubes | 1 | |
| DPN75002 | KIT REPAIR OUTLET TUBES,EAPS | 1 | |
| F70300-1 | ADAPTOR FLAPDRIVEFLAPTORQUETUBESPLINEMAN | 25 | |
| G52018 | DRILL JIG EQPT -0 DOOR LATCH TORQUE TUBES | 1 | |
| G52018-1 | DRILL JIG EQUIPMENT - DOOR LATCH TORQUE TUBES | 1 | |
| GS23444-1 | TRANSFERTUBESEALEXPANDER | 9 | |
| GS23445-1 | TRANSFERTUBESEAL-SPLITRING | 10 | |
| HU43992 | SPANNER-HYDR TUBES FAN CASE | 1 | |
| HU43993 | SPANNER-HYDR TUBES FAN CASE | 1 | |
| IAE1M14084 | FIXTURE, SUPPORT - ENGINE ASSY, LPT ACC PIPING UPPER/LOWER CONECTOR TUBES. | 5 | |
| IAE2F10397 | ADAPTER, LEAK TEST OIL SCAV TUBES | 1 | |
| IAE2F10400 | ADAPTER, LEAK TEST OIL SCAV TUBES | 1 | |
| JMP/CF34/D/6553/TUBES | (Port & Starboard) CF34-8C/E Engine Probe Tubes Only | 1 | |
| JMP/CF6/D/4037/TUBES | (Port & Starboard) CF6-80C2 Engine Probe Tubes Only | 1 | |
| JMP/CF6/D/4947/TUBES | (Port & Starboard) CF6-80E1 Engine Probe Tubes Only | 1 | |
| JMP/CFM56/D/4435/TUBES | (Port & Starboard) CFM56-2 & 5A Engine Probe Tubes Only | 1 | |
| JMP/CFM56/D/4462/TUBES | (Port & Starboard) CFM56-7 Engine Probe Tubes Only | 1 | |
| JMP/CFM56/D/4538/TUBES | (Port & Starboard) CFM56-3 Engine Probe Tubes Only | 1 | |
| JMP/CFM56/D/4605/TUBES | (Port & Starboard) CFM56-5B/C Engine Probe Tubes Only | 1 | |
| JMP/GE90-115B/D/4949/TUBES | (Port & Starboard) GE90-115b Engine Probe Tubes Only | 1 | |
| JMP/GE90/D/4081/TUBES | (Port & Starboard) GE90 Engine Probe Tubes Only | 1 | |
| JMP/GENX/D/6783/TUBES | (Port & Starboard) GEnx Engine Probe Tubes Only | 1 | |
| JMP/GP7200/D/7035/TUBES | (Port & Starboard) GP7200 Engine Probe Tubes Only | 1 | |
| JMP/LEAP/D/7028/TUBES | (Port & Starboard) LEAP 1A/B/C Short Engine Probe Tubes Only | 1 | |
| JMP/RB211/D/4153/TUBES | (Port & Starboard) RB211-535E4 Short Engine Probe Tubes Only | 1 | |
| JMP/TRENT/D/4702/TUBES | (Port & Starboard) Trent 772 Short Engine Probe Tubes Only | 1 | |
| JMP/TRENT/D/6188/TUBES | (Port & Starboard) Trent 500 Short Engine Probe Tubes Only | 1 | |
| JMP/V2500/D/4040/TUBES | (Port & Starboard) V2500 Engine Probe Tubes Only | 1 | |
| KB16222 | RING SEAL FOR FUEL TUBES AND MANIFOLDS | 1 | |
| KPC3-640--35 | PITOT TUBES COVER | 11 | |
| KPC3-640-35 | COVER-PITOT TUBES VERT STAB | 11 | |
| LMT917 LMT918 | GUIDE TUBES. | 1 | |
| LTCT12970-02 | Kit, Borescope (Guide Tubes Only) | 1 | |
| M444000 | PW125 AND PW127 GUIDE TUBES SET | 1 | |
| MAJ-1737 | SET OF STRIGHT GUIDE TUBES FOR IV9435G. | 1 | |
| MD900-001 | FORWARD BUBBLE COVER (twin pitot tubes) | 1 | |
| MD900-015 | FORWARD BUBBLE COVER w/ Wire Strike, twin pitot tubes | 1 | |
| MD900-815 | TRAVEL COVER, Light Weight Travel Forward Bubble Cover (Twin Pitot Tubes) | 1 | |
| MD900-840 | TRAVEL COVER, Light Weight Travel Forward Bubble Cover W/ Wire Strike, Twin Pitot Tubes | 1 | |
| MECHGTUBE-8538 | MECHANICAL GUIDE TUBES | 1 | |
| MU2-005 | EXTENDED COCKPIT COVER (forward over pitot tubes) | 1 | |
| P60375 | COVER, SHIPPING (OIL TUBES) | 1 | |
| PWA 45256 | INLET PRESSURE PROBES WITH TUBES | 1 | |
| PWA 87482 | EXPANDER 9TH STAGE BLEED TUBES | 2 | |
| PWA115120 | GUIDE GUIDE TUBES, BORESCOPE | 1 | |
| PWA45256 | INLET PRESSURE PROBES WITH TUBES | 1 | |
| PWA45363 | REGULATOR ASSY AIR PRESSURE 4 BRG OIL TUBES | 1 | |
| PWC30128-05 | PULLER, GAS GENERATOR CASE DRAIN TUBES | 5 | |
| PWC30128-06 | PULLER, NO.4 BEARING PRESSURE/SCAVENGE OIL TUBES | 7 | |
| PWC31272 | PULLER, CABIN BLEED AIR TUBES (REPLACES PWC30128-08) | 2 | |
| PWC32366 | Pusher Tubes | 12 | |
| PWC34910-200 | GUIDE TUBES | 12 | |
| PWC34910-400 | GUIDE TUBES | 6 | |
| PWC34910-600 | BORESCOPE AND GUIDE TUBES | 10 | |
| PWC34910-800 | GUIDE TUBES | 10 | |
| PWC34910-804 | BORESCOPE TUBES | 17 | |
| PWC37093 | CRIMPER GASKET FOR OIL TUBES | 9 | |
| PWC37771 | TUBES, TURBINE WASHING | 11 | |
| PWC37771B | TUBES, TURBINE WASHING | 1 | |
| PWC54028 | PUSHER/PULLER, FUEL MANIFOLD TRAN TUBES | 2 | |
| PWC54246 | PULLER/PUSHER, TUBES (ALTERNATIVE TO PWC32366) | 7 | |
| PWC54254 | PUSHER/PULLER, FUEL MANIFOLD TRANSFER TUBES | 16 | |
| PWC54255 | PUSHER/PULLER, FUEL MANIFOLD TRANSFER TUBES | 13 | |
| PWC57392 | FORK TRANSFER TUBES | 6 | |
| PWС37771B | TUBES, TURBINE WASHING | 1 | |
| QR10934 | KIT REPAIR OUTLET TUBES,EAPS | 1 | |
| RCSK8-02-001 | TOOL KIT - REPAIRING, HYDRAULIC TUBES | 1 | |
| SAG23210 | DBLE WALL ADHESIVE SHRNK TUBES | 1 | |
| SAM20080 | BRAKE BLEED TUBES | 3 | |
| SPL-14907 | BORESCOPE GUIDE TUBES | 1 | |
| STD-7390 | CAPS - FOR INLET TUBES OF THE DETECTORS | 1 | |
| TM7934G001 | INTERDUCT TUBES PROTECTOR | 1 | |
| TPAA4C0C0C0A0 | COBRA FORK TUBES | 1 | |
| TUBES GUIDE FOR CFM65-5B | TUBES GUIDE FOR CFM65-5B | 1 | |
| TUBES GUIDE FOR V2500-A5 | TUBES GUIDE FOR V2500-A5 | 1 | |
| VIK-150 | SONOBUOY TUBES PLUG SET (set of 16) | 1 | |
| W114133A | PISTOL GRIP GREASE GUN SET, WITH 18INCH FLEXIBLE HOSE, 2 FIXED TUBES, 3 NOZZLES INCLUDED, 14OZ LOAD,4000 PSI | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
