| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| C55001-10 | TUBE PLUG | 1 | |
| F80080-29 | TUBE PLUG | 1 | |
| F80080-38 | TUBE PLUG | 1 | |
| F80080-49 | TUBE PLUG | 1 | |
| F80080-55 | TUBE PLUG | 1 | |
| G28009-15 | TUBE PLUG | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 286022-1 | BOROSOCOPE-IGNITOR PLUG GUIDE TUBE | 2 | |
| 286023-1 | BOROSOCOPE-IGNITOR PLUG GUIDE TUBE | 2 | |
| 6796641 | GAGE, PLUG, CROSSOVER TUBE | 2 | |
| 856A2945G01 | LOCATING PLUG - CENTER VENT TUBE | 4 | |
| 856A3101G01 | PLUG, LOCATING-CENTER VENT TUBE | 3 | |
| 856A3101G02 | Plug, Locating - Center Vent Tube (locating plug) | 9 | |
| 856A3104 | TUBE DUMMY LPT SHAFT PLUG | 1 | |
| 856A3104G03 | TUBE DUMMY LPT SHAFT PLUG | 1 | |
| 856A3430 | TOOL SET, REMOVAL - OIL TUBE AND PLUG, NO. 1 GEARSHAFT ASSEMBLY, AGB (REMOVAL TOOL SET) | 1 | |
| 9565K26 | TUBE FINISHING PLUG 1"1/2 SQUARE | 1 | |
| A501192 | Puller – Sun Gear Lube Tube Orifice Plug | 1 | |
| AN806-10 | Plug-flared tube | 1 | |
| AN806-10D | ALUM FLARED TUBE PLUG | 6 | |
| AN806-12 | Plug-flared tube | 1 | |
| AN806-14 | Plug-flared tube | 1 | |
| AN806-16 | Plug-flared tube | 1 | |
| AN806-2 | Plug-flared tube | 1 | |
| AN806-3 | Plug-flared tube | 1 | |
| AN806-4 | Plug-flared tube | 1 | |
| AN806-5 | Plug-flared tube | 1 | |
| AN806-6 | Plug-flared tube | 1 | |
| AN806-8 | Plug-flared tube | 1 | |
| AN806-8D | ALUM FLARED TUBE PLUG | 8 | |
| AS5168-06 | PLUG - FLARED TUBE - FUEL SHROUD TEST | 1 | |
| AS5168R06 | PLUG FLARED TUBE - FUEL SHROUD TEST | 1 | |
| AS5231J10 | PLUG - HYDRAULIC PRESSURE TUBE, 5/8 INCH LINE, CORROSION RESISTANT STEEL | 1 | |
| AS5231W06 | PLUG - FLARELESS TUBE (AS5231W06 OR SIMILAR) | 2 | |
| AS5231W08 | PLUG - HYDRAULIC RETURN TUBE, 1/2 INCH LINE, ALUMINUM | 1 | |
| B50-105 | AUGMENTER EXHAUST TUBE PLUGS (set of 4) | 1 | |
| BACP20AU10D | PLUG- FLARELESS TUBE | 4 | |
| BACP20AU10J | PLUG - HYDRAULIC PRESSURE TUBE, 5/8 INCH LINE, CORROSION RESISTANT STEEL | 1 | |
| BACP20AU5J | PLUG - CRES, FLARELESS TUBE | 2 | |
| BACP20AU8D | PLUG - HYDRAULIC RETURN TUBE, 1/2 INCH LINE, ALUMINUM | 1 | |
| BACP20AU8J | PLUG - HYDRAULIC RETURN TUBE, 1/2 INCH LINE, CORROSION RESISTANT STEEL | 3 | |
| C.36001-14 | FLORELESS TUBE END PLUG MS6 | 4 | |
| C.36001-15 | FLORELESS TUBE END PLUG MS4 | 3 | |
| C36001-14 | FLARE TUBE END PLUG MS6 | 4 | |
| C36001-15 | FLARE TUBE END PLUG MS4 | 3 | |
| CH1543-0042 | PRESSURE BLANKING PLUG FOR CONDUCTING TEST ON GUIDE TUBE ASSY (P/N CH1543A0011) | 1 | |
| DEN-101 | SMALL PLUGS SET (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet & Engine Mount NACA scoops) (set of 9) | 1 | |
| DEN-102 | SMALL PLUGS SET (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet) (set of 4) | 1 | |
| DEN-110 | SMALL PLUGS SET, 47E Next Gen Models (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet & Engine Mount NACA scoops) (set of 9) | 1 | |
| DEN-111 | SMALL PLUGS SET, 47E Next Gen Models (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet) (set of 4) | 1 | |
| EddyFi Ectane (E128RNMI) Base Unit | EddyFi Ectane (E128RNMI) Base Unit - Multi-technology for tube inspections: ECT, RFT, NFT, MFL, and array equivalents, and IRIS ultrasound technology, Plug-and-play connectivity | 1 | |
| F1276386 | VISE FIXTURE FOR TUBE PLUG | 1 | |
| F65-0-50376 | Tube Test Plug | 1 | |
| F80080-29 | Plug Assy Cross Over Vent Tube | 1 | |
| F80080-49 | TUBE PLUG ASSY | 1 | |
| F80080-55 | Plug assy surge Tank Drain Tube | 1 | |
| G36009 | PLUG EQUIPMENT -0 DUCT/TUBE PRESSURE TEST | 1 | |
| G36009-1 | PLUG EQUIPMENT - DUCT/TUBE PRESSURE TEST | 1 | |
| G36009-2 | PLUG EQUIPMENT - DUCT/TUBE PRESSURE TEST | 1 | |
| G36009-3 | PLUG EQUIPMENT - DUCT/TUBE PRESSURE TEST | 1 | |
| MS21913 | PLUG-ALUMINUM,FLARELESS TUBE SIZES 2 THRU 32 | 1 | |
| MS21913-10 | Plug，flareless tube | 15 | |
| MS21913-12 | Plug，flareless tube | 13 | |
| MS21913-14 | PLUG,FLARELESS TUBE | 1 | |
| MS21913-16 | PLUG TUBE FLL | 11 | |
| MS21913-2 | Plug，flareless tube | 6 | |
| MS21913-20 | Plug，flareless tube | 2 | |
| MS21913-24 | Plug，flareless tube | 3 | |
| MS21913-3 | Plug，flareless tube | 11 | |
| MS21913-32 | Plug，flareless tube | 1 | |
| MS21913-4 | Plug，flareless tube | 19 | |
| MS21913-5 | Plug，flareless tube | 15 | |
| MS21913-6 | Plug，flareless tube | 18 | |
| MS21913-8 | PLUG-FLARELESS TUBE | 21 | |
| MS21913D12 | PLUG-FLARELESS TUBE | 9 | |
| MS21913D4 | PLUG-FLARELESS TUBE | 13 | |
| MS21913D6 | PLUG: FLARELESS TUBE | 19 | |
| MS21913E-10 | PLUG FLARELESS TUBE | 1 | |
| MS21913E-4 | FLARELESS PLUG TUBE | 1 | |
| MS21913E-5 | FLARELSS PLUG TUBE | 1 | |
| MS21913J6 | PLUG, FLARELESS TUBE | 5 | |
| MS21913W4 | Plug，flareless tube | 1 | |
| MS21913W5 | Plug，flareless tube | 2 | |
| MS21913W8 | PLUG - HYDRAULIC RETURN TUBE, 1/2 INCH LINE, ALUMINUM | 1 | |
| MS21914-5J | PLUG,TUBE FITTING,THREADED | 1 | |
| MS21914M-4 | FLARELESS PLUG TUBE | 1 | |
| MS219213J6 | PLUG TUBE 3/8" | 1 | |
| MS21921H-10 | FLARELESS PLUG TUBE | 1 | |
| PC12-101 | SMALL PLUGS SET (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet & Engine Mount NACA scoops) (set of 9) | 1 | |
| PC12-102 | SMALL PLUGS SET (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet) (set of 4) | 1 | |
| PC12-110 | SMALL PLUGS SET, 47E Next Gen Models (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet & Engine Mount NACA scoops) (set of 9) | 1 | |
| PC12-111 | SMALL PLUGS SET, 47E Next Gen Models (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet) (set of 4) | 1 | |
| PWA104438 | PLUG TUBE | 1 | |
| PWA86081 | PULLER - KNOCKER, LPT BORESCOPE PLUG TUBE - GUIDE, ENGINE FIRST STAGE NOZZLE GUIDE VANES BORESCOPE | 7 | |
| PWA86411 | PULLER - KNOCKER, LPT BORESCOPE PLUG TUBE - GUIDE, ENGINE FIRST STAGE NOZZLE GUIDE VANES BORESCOPE | 11 | |
| PWC30128-07 | PULLER;OIL FILLER TUBE BLANKING PLUG | 1 | |
| PWC50781 | PULLER, PLUG ON/OFF RESTRICTOR TUBE | 9 | |
| PWC66475 | Puller LP Oil Tube Plug | 2 | |
| SS-400-P | 316 STAINLESS STEEL PLUG FOR 1/4 IN. SWAGELOK TUBE FITTING | 1 | |
| SS400P | 316 STAINLESS STEEL PLUG FOR 1/4 IN. SWAGELOK TUBE FITTING | 1 | |
| STD-1131 | PLUG - PROTECTIVE, FLARELESS TUBE, 1/2-20 THREAD | 1 | |
| T34-150 | AUGMENTOR TUBE PLUGS (set of 2) | 1 | |
| VIK-150 | SONOBUOY TUBES PLUG SET (set of 16) | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
