| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| C21003-38 | Tube 6 | 1 | |
| C21003-39 | Tube 6 | 1 | |
| C21003-66 | TUBE 6 | 1 | |
| C21003-67 | Tube 6 | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) EKA320531290-1 | SLEEVE, FLARED, TUBE FITTING; CBS-8-1-N-16F SLEEVE (CALIBRATION) | 1 | |
| 04-364-03 | Lever Type Tube Benders (Type 1*: 1/8") (Radius to center of tube: 3/8") (Add to cart: This item is temporarily unavailable.) (Type 1*: 3/16") (Radius to center of tube: 7/16") (Add to cart: Add To Cart) | 1 | |
| 04-364-04 | Lever Type Tube Benders (Type 1*: 1/8") (Radius to center of tube: 3/8") (Add to cart: This item is temporarily unavailable.) (Type 1*: 3/16") (Radius to center of tube: 7/16") (Add to cart: Add To Cart) (Type 1*: 1/4") (Radius to center of tube: 9/16") ( | 1 | |
| 04-364-05 | Lever Type Tube Benders (Type 1*: 1/8") (Radius to center of tube: 3/8") (Add to cart: This item is temporarily unavailable.) (Type 1*: 3/16") (Radius to center of tube: 7/16") (Add to cart: Add To Cart) (Type 1*: 1/4") (Radius to center of tube: 9/16") ( | 1 | |
| 04-364-06 | Lever Type Tube Benders (Type 1*: 1/8") (Radius to center of tube: 3/8") (Add to cart: This item is temporarily unavailable.) (Type 1*: 3/16") (Radius to center of tube: 7/16") (Add to cart: Add To Cart) (Type 1*: 1/4") (Radius to center of tube: 9/16") ( | 1 | |
| 04-364-08 | Lever Type Tube Benders (Type 1*: 1/8") (Radius to center of tube: 3/8") (Add to cart: This item is temporarily unavailable.) (Type 1*: 3/16") (Radius to center of tube: 7/16") (Add to cart: Add To Cart) (Type 1*: 1/4") (Radius to center of tube: 9/16") ( | 1 | |
| 04-364-10 | Lever Type Tube Benders (Type 1*: 1/8") (Radius to center of tube: 3/8") (Add to cart: This item is temporarily unavailable.) (Type 1*: 3/16") (Radius to center of tube: 7/16") (Add to cart: Add To Cart) (Type 1*: 1/4") (Radius to center of tube: 9/16") ( | 1 | |
| 04-364-12 | Lever Type Tube Benders (Type 1*: 1/8") (Radius to center of tube: 3/8") (Add to cart: This item is temporarily unavailable.) (Type 1*: 3/16") (Radius to center of tube: 7/16") (Add to cart: Add To Cart) (Type 1*: 1/4") (Radius to center of tube: 9/16") ( | 1 | |
| 04-367-FH | 90° Triple Header Tube Benders (Capacity: 1/8", 3/16" & 1/4" O.D.) (Add to cart: Add To Cart) | 1 | |
| 04-368-FH | 90° Triple Header Tube Benders (Capacity: 1/8", 3/16" & 1/4" O.D.) (Add to cart: Add To Cart) (Capacity: 1/4", 5/16" & 3/8" O.D.) (Add to cart: Add To Cart) | 1 | |
| 11-01000-1 | HEAT SHRINK TUBE 3/16 BLACK 4'(HARNESS SHOP ONLY) | 1 | |
| 115-116 | Mitutoyo 115-116 Tube Micrometer 25-50mm | 1 | |
| 115-216 | Mitutoyo 115-216 Tube Micrometer 25-50mm | 1 | |
| 115-316 | Mitutoyo 115-316 Tube Micrometer 0-25mm, 8.2mm Dia. Cylindrical Tip | 1 | |
| 131.11 | BOURDON TUBE PRESSURE GAUGE STAINLESS STEEL COMPACT VERSION NS 40 (1 1/2"), 50 (2") AND 63 (2 1/2") | 1 | |
| 139-176 | Mitutoyo 139-176 Extension Tube Inside Micrometer 100-1700mm | 1 | |
| 139-179 | Mitutoyo 139-179 Extension Tube Inside Micrometer 4-36" | 1 | |
| 139-181 | Mitutoyo 139-181 Extension Tube Inside Micrometer 4-68" | 1 | |
| 140-160 | Mitutoyo 140-160 Extension Tube Inside Micrometer 1000-5000mm | 1 | |
| 140-162 | Mitutoyo 140-162 Extension Tube Inside Micrometer 40-120" | 1 | |
| 140-163 | Mitutoyo 140-163 Extension Tube Inside Micrometer 40-160" | 1 | |
| 140-164 | Mitutoyo 140-164 Extension Tube Inside Micrometer 40-200" | 1 | |
| 15000 PSI Gauge | McDaniel Controls Inc Pressure 0 15000 PSI Gauge 316 SS Tube and socket | 1 | |
| 195-05 | WRENCH, TUBE RAPID ACTION RATCHET, 5/16 | 1 | |
| 1X8-12-CS | BOUCHON CONIQUE DE TUBE 1 DIA 8 12 BWG DIA MIN0680 DIA MAX0800 LONGUEUR3500 MATRIEL ACIER CARBONE 1018-1020 | 1 | |
| 2C6092G02 | WRENCH SPANER PRES TUBE;CF6-6/-50 | 1 | |
| 2C6948P06 | BOROSCOPE GUIDE TUBE 9.5MM (GTD-600) | 3 | |
| 2PRE65B94600 | PROTECTIVE SHIELD - COOLING TUBES, CF6-50 ENGINE TURBINE | 3 | |
| 35-92678-0001 | FLEXIBLE DRAIN TUBE 35-92677-0001 | 1 | |
| 364-FHA-10 | BENDER, TUBE HAND, .625” | 1 | |
| 367-FH | Lever Type Triple Header Tube Benders - (for 1/8", 3/16" and 1/4" tubing) | 1 | |
| 368-FH | Lever Type Triple Header Tube Benders - (for 1/4", 5/16" and 3/8" tubing) | 1 | |
| 370-FH | 180° Triple Header Tube Bender (Range: 11/16" (1/4"), 1-1/8" (3/8"),) (Radius to center of tube: 1-1/2" (1/2")) (Capacity: 1/4", 3/8"& 1/2" O.D.) (Add to cart: Add To Cart) | 2 | |
| 383C-9R-140 | RATCH TUBE WRENCH 9/16 - 140IN | 1 | |
| 395-362 | Mitutoyo 395-362 Digimatic Tube Micrometer 0-25mm / 0-1" | 1 | |
| 395-363 | Mitutoyo 395-363 Digimatic Tube Micrometer 0-25mm / 0-1" | 1 | |
| 395-364 | Mitutoyo 395-364 Digimatic Tube Micrometer 0-25mm / 0-1" | 1 | |
| 3G6305G00232 | TOOL,GIMBAL/TORQUE TUBE BUSHINGS REMOVAL (NSCM A0126) | 1 | |
| 3G6305G01232 | TOOL,GIMBAL/TORQUE TUBE BUSHINGS REMOVAL (NSCM A0126) | 1 | |
| 4062A | TUBE PLANAR TRIODE 16112 | 2 | |
| 460001682-36 | SPANNER - GLANDSEAL TUBE MLG (MV7632-5-09) | 1 | |
| 470-FH | 180° Triple Header Tube Bender (Range: 11/16" (1/4"), 1-1/8" (3/8"),) (Radius to center of tube: 1-1/2" (1/2")) (Capacity: 1/4", 3/8"& 1/2" O.D.) (Add to cart: Add To Cart) (Range: 7/16" (3/16"), 9/16" (1/4"),) (Radius to center of tube: 11/16" (5/16"), 1 | 3 | |
| 5.00 X 5 | NOSE TUBE(6 PLY) | 1 | |
| 5033K36 | PTFE TUBE 9/16 OD X 7/16 ID (PER FOOT) | 1 | |
| 506 TB | TUBE BENDING TOOL 3/8-15/16 | 1 | |
| 50J914 | TUBE TRANSFER SEAL RING (1.3075 X 1.600) | 1 | |
| 5100S157 | DEICER BOOT PRIMER KIT 5100S157 (4 GLASSTUBES OF 706075 PRIMER SOLUTION ) -PRIMER KIT | 1 | |
| 5120-01-137-3557 | OIL TUBE FIXTURE PACKAGING: D-LM-008-036/SF-000 QAC:C | 1 | |
| 573-661 | Mitutoyo 573-661 ABSOLUTE Digimatic Tube Thickness Caliper 0-150mm | 1 | |
| 573-761 | Mitutoyo 573-761 ABSOLUTE Digimatic Tube Thickness Caliper 0-150mm / 0-6" | 1 | |
| 63687-1 | ADAPTER, ORAL TUBE TEST //AIR CRUISERS V70167 | 2 | |
| 642-5515-509 | TUBE ASSY PRE SB RA32036-9 | 1 | |
| 6546K411 | TUBE 2 X 3 X 1/8 X 12" LG ALUMINIUM 6061-T6 | 1 | |
| 67220647-2 | PRESSURE DROP TUBE (P/O P/NO. 7416805-1) | 1 | |
| 703A95-0535-00 | FUEL DUMP TUBE [AS365 - EC155] | 2 | |
| 71006 | Valco Cincinnati 71006 Tube-Grip 2.5 Industrial Size Dispenser | 2 | |
| 79551 | (1) 6x8x.188 Tube Upper | 1 | |
| 173785 | CHARGING ADAPTER 5/16 TUBE | 9 | |
| 431252 | 679 MM EXTENSION TUBE | 1 | |
| 0000811046 | TUBE RISLAN 6 X4 LG 10M | 1 | |
| 1083693 | TUBE VENT #6 BEARING | 1 | |
| 2000468 | G200 towbar head for Gulfstream G150/G200/G250/G280/Galaxy/Dornier 328/Envoy 3. 60" aluminum extension tube with head attachment. Extension allows sufficient clearance under nose of aircraft to use with standard length towbar, eliminating the need for a | 1 | |
| 2001371 | Helicopter Towbar for BELL UH-1, AH-1, 205, 212 AND 412 TYPES and Eurocopters (except AS-365 & EC-155)-Skid tube diameter: 3 1/4" to 4 1/2"-Length: 140", legs can be split into 4 pcs. of 5 1/2 ft. for easier transport-Skid spread: 25" to 120"-Weight: 155 | 1 | |
| 2001372 | Helicopter REAR Towbar for BELL UH-1, AH-1, 205, 212 AND 412 TYPES and Eurocopters (except AS-365 & EC-155)-Skid tube diameter: 3 1/4" to 4 1/2"-Length: 140", legs can be split into 4 pcs. of 5 1/2 ft. for easier transport-Skid spread: 25" to 120"-Weight: | 1 | |
| 2001384 | towbar designed to fit the Bell 206, OH-58 and MD500 types with skid tube aft of cross tube for hook up. his tow bar can also be used for pulling from the front and is very similar to 002090 with the exception it is longer and pulls the tail down to get | 1 | |
| 2001385 | Helicopter REAR towbar designed to fit the Bell 206, OH-58 and MD500 types with skid tube aft of cross tube for hook up. his tow bar can also be used for pulling from the front and is very similar to 002090 with the exception it is longer and pulls the t | 1 | |
| 2001522 | F-16 Fighter Jet Towbar: Specifically designed to tow the Lockheed F-16. Consists of an TB125-2R 20' and head assembly.*The wheels can be positioned on the tow bar tube so the head pins are at the axle height when the front caster wheels are on the groun | 1 | |
| 2002755 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 3" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002756 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 8" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002758 | Oxygen Charge Adapter Combo- 2500 PSI Max- 1/4 Male NPT Inlet connection- Male NPT Inlet connection- 9/16-18UNF male inlet connected by 1" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2003315 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 1" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2404210 | SHRINK TUBE,WHITE , 3/16 IN | 1 | |
| 5305427 | ADAPTER ASSY OF TUBE TO BOSS,OIL SUPPLY #5-6 BEARING | 1 | |
| 7007752 | FLEX & STAY GUIDE TUBE: PART NO.7007752 FOR 6MM DIAMETER FLEXIBLE SCOPE, 4M FOR TURBINE APPLICATIONS | 1 | |
| 057840099 | Schrader 5784 High Pressure Strut Coupler - 716-20 thread for 14 tube - 5,000 PSIG | 2 | |
| 400630686 | SPANNER - TUBE (MV7632-5-36) | 1 | |
| 460007271 | 460007271(SPANNER-TUBE) -A320 | 9 | |
| 710800766 | TUBECLEANGSYST.1/4" 6X0,8" | 1 | |
| 856A1310P02 | BOROSCOPE GUIDE TUBE CF6 GE90 | 13 | |
| 856A1351P0 | CUSTOM GUIDE TUBE FOR CFM56 | 1 | |
| 856A1351P01 | CUSTOM GUIDE TUBE FOR CFM56 | 14 | |
| 89965K52 | TUBE ALLOY 6061 1/2"ODX.035WALL -72"LG | 1 | |
| 89965K62 | TUBE 6061-T6 ALUM 3/4 OD X 0.035 WALL X 6' FLAREABLE | 1 | |
| 9013192802 | EN-Z2CN1810 TUBE 16X14 | 1 | |
| 91/263 | 91/16 WINDING MECHANISM WITH FIXED TUBE | 1 | |
| 959-61-81-175 | TUBE(6.00-6) | 1 | |
| 96-321000-607 | TUBE, DE-ICE ASSY. W/ 2H30-6 VALAVE | 1 | |
| 98A27608017102 | TUBE DIA 20 X 3,5 X 680 DIN 2391 | 1 | |
| 9C3138G01 | TWO PIECE GUIDE TUBE EXTENSION (TUBE EXTENSION GUIDE) WHEN PERFORMING Q/T IN A 9C6025 STAND, ALTERNATIVE TOOL TO 9C3138G02 | 1 | |
| 9C3138G02 | ONE PIECE GUIDE TUBE EXTENSION (TUBE EXTENSION GUIDE) WHEN REWORKING IN 9C6025 STAND | 1 | |
| AC 20-1005P-02L-600# | commercial pressure gauge, 2.5in dial, black ABS case, bronze tube, 1/4in NPT lower connection, 0-600PSI range | 1 | |
| AC 25-1001TH-01B-XUC-160# | panel pressure gauge, 2.5in dial, steel case, bronze tube, 1/8in NPT back connection, U clamp, 0-160PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-60# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-60PSI range | 1 | |
| AC 25-1009SW-02L-X6BC4LL-4000#/BR | 2.5in dial, 304SS case, 316SS Bourdon tube & socket, 1/4in MNPT lower connection, cleaned for gaseous oxygen, calibration cert, Plus! performance option, 0-4,000PSI/Bar range" | 1 | |
| AC 25-1009SW-02L-XC4LL-100# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, Plus! option, 0-100PSI range | 1 | |
| AC 25-1009SW-02L-XC4LL-10000# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, Plus! option, 0-10,000PSI range | 1 | |
| AC 25-1009SW-02L-XC4LL-3000# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 30-1084S-02L-XC4-100# | test pressure gauge, 3in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, 0-100PSI range | 1 | |
| AC 30-1084S-02L-XC4-60# | test pressure gauge, 3in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, 0-60PSI range | 1 | |
| AC 35-1009SW-02B-XC4LL-5000# | pressure gauge, 3.5in dial, SS case, 316SS tube, 1/4in NPT lower back connection, calibration cert, Plus! option, 0-5,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-10000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-3000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-4000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-4,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-5000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-4,000PSI range | 1 | |
| AC 45-1279SS-04L-XLL-5000# | 4.5IN Phenol Case316SS 1.0 Tube & Socket, 1/2in NPT Lower Connection, Plus! Performance Option, 0-5000PSI Range, Upc: 723259263407 | 1 | |
| AC 50-1008S-02L-600# | pressure gauge, 50mm (2in) dial, SS case, 316SS tube, 1/4in NPT lower connection, 0-600PSI range | 1 | |
| AC 63-1008A-02L-30# | pressure gauge, 63mm dial, SS case, bronze tube, 1/4in NPT lower connection, 0-30PSI range | 1 | |
| AGE-03902-401 | NEEDLE VALVE AND DRIP TUBE, GSE-468 | 4 | |
| AN929-3 | FLARED TUBE CAP 3 16 | 8 | |
| AN929-5J | CORROSION RESISTANT STEEL, 5/16", TUBE CAP | 12 | |
| APN-93-6/7L | SURFACE PROBE SHIELDED 1/8" DIA TUBE 90 DEGREE, .300" DROP, 6.0" LONG 7 PIN LEMO CONNECTOR 50-500KHZ Includes Test Report and Certificate of Conformance | 1 | |
| ARP-.250/1.1-500HZ-5K | Handheld Detachable Probe w/o Cable; Model: RNG = Detachable Ring Probe with Reflection (Driver Pick-up Coils) ; Item Diameter: 0.250in (6.4mm); Tube ID: ; Coil: #= Special; Poly Type: None; Length: No cable; Connector: 1 Pin Female Triaxial Connecto... | 1 | |
| AS21902J5 | UNION, FLARELESS TUBE(BT)TC/36-008-01-01 | 1 | |
| AS21902J6 | UNION, FLARELESS TUBE(BT)TC/36-008-01-01 | 1 | |
| AS5231W06 | PLUG - FLARELESS TUBE (AS5231W06 OR SIMILAR) | 2 | |
| AT33454 | MEYER HYDRAULICS Special Slide Tube, For A334B, A334C 34 to 60 in Range Extension Aircraft Jacks | 2 | |
| AT33460 | MEYER HYDRAULICS Special Slide Tube, For A334B, A334C 34 to 60 in Range Extension Aircraft Jacks | 2 | |
| AT42222 | TUBE: SLIDE,JACK,22IN TO 36IN, FOR A422 JACK | 2 | |
| AT62222 | MEYER HYDRAULICS AT62222 Inner Slide Tube | 2 | |
| AT62234 | MEYER HYDRAULICS AT62234 Inner Slide Tube | 2 | |
| AT63448 | MEYER HYDRAULICS AT63448 Inner Slide Tube | 2 | |
| ATC4 | MEYER HYDRAULICS ATC-4 Extension Tube Cap, For A6 Jack and Tubes | 2 | |
| ATEC01 | MEYER HYDRAULICS Slide Tube, For A519, A627 or A427 28 to 47 in Range Aircraft Jacks | 2 | |
| ATI560CF36 | 36IN LONG EXTENSION FLEX TUBE | 1 | |
| ATI560MF-36 | MINA-VAC-METAL W/36IN FL TUBE | 1 | |
| ATI560R10 | 12IN RIGID TUBE-USED W/ATI560C | 1 | |
| ATP-VJ-69-1500 ADV | VIDEOSCOPE VJ-ADV 6.9 MM (1.5 MTR TUBE) | 2 | |
| ATP-VJ-69-3000 ADV | VIDEOSCOPE VJ-ADV 6.9 MM (3.0 MTR TUBE) | 2 | |
| ATP-VJ-69-5000 ADV | VIDEOSCOPE VJ-ADV 6.9 MM (5.0 MTR TUBE) | 3 | |
| ATPNR-903-6 | Handheld Detachable Pencil Tip Probe 90° Degrees, ABS Shielded, Reflection, Diameter: 0.125in (3mm); Tube ID, 0.030" inch (0.8mm) Drop, Frequency: 50-500 kHz, 6.0in (152mm); Supplied with a Triaxial Fischer Connector. Includes Test Report and Certifica | 1 | |
| B-4-HC-A-40 1 | TUBE ADAPTER (0.250 IN. (6,35 MM)) | 1 | |
| B0RESC0PEGUIDEKIT | CFM56-7B BORESCOPE HPT GUIDE TUBES | 1 | |
| B6700 | 60" QUAD TUBE LIGHT | 1 | |
| BACC14AD06 | CAP ASSEMBLY - PRESSURE SEAL, FLARELESS TUBE, STD-6640 | 2 | |
| BOE-001 | BOELUBE Drilling Lubricant - Push-Up Tube 1.6oz | 1 | |
| C.36001-14 | FLORELESS TUBE END PLUG MS6 | 4 | |
| C0004 | LOCK - INTERMEDIATE TORQUE TUBE (MV7627-5-13) | 1 | |
| C0006A | TOOL - TORQUE TUBE RIGGING ELEV. SYST (MV7627-5-14) | 1 | |
| C21003-37 | TUBE 5 (OPP -36) | 1 | |
| C21003-65 | TUBE 4 (OPP -64) | 1 | |
| C21003-67 | TUBE 6 (OPP -66) | 1 | |
| C36001-12 | FLARE TUBE END CAP AN4 (SUBCOMPONENT OF C36001-63) | 8 | |
| C36001-13 | FLARELESS TUBE END CAP MS4 (BELONGS TO TOOL C36001-63) | 4 | |
| C36001-14 | FLARE TUBE END PLUG MS6 | 4 | |
| C36001-15 | FLARE TUBE END PLUG (SUBCOMPONENT OF C36001-63)I | 3 | |
| C36001-66 | Flareless Tube End Cap MS6 | 1 | |
| C36001-68 | FLARELESS TUBE END CAP WITH 0.020-INCH HOLE MS4 (BELONGS TO TOOL C36001-63) | 1 | |
| C36001-69 | Flareless Tube End Cap with 0.032 Inch Hole MS6 | 1 | |
| C6X-S | #8 C6XS TRIPLE-LOK® 37° FLARE JIC TUBE FITTINGS AND ADAPTERS | 1 | |
| CDI497003802 | TUBE LASER MARK 600# | 1 | |
| CGGA885014KT | 16 OZ GREASE TUBE ASSEMBLY KIT | 1 | |
| D12530-001 | SMALL TUBE CUTTER DEUTSCH -03 THRU-06 | 12 | |
| D12530-01 | TUBE CUTTER 3/16 TO 3/8" | 1 | |
| D12530-109 | TUBE CUTTER 3/16" TO 3/8", REPLACEMENT CUTTING WHEEL | 3 | |
| DAT08AEFKT5001 | KIT, SWAGING -04 THRU -20 TUBE (COM-8946) | 5 | |
| DC062 | Starrett 569AXP TUBE MIC | 1 | |
| DC068 | Starrett 569BXP TUBE MIC | 1 | |
| DC082 | Starrett 569MAXP TUBE MIC | 1 | |
| DC092 | Starrett 569MBXP TUBE MIC | 1 | |
| DLT40MADA0001 | 3/16" TO 3/8" TUBE CUTTER | 2 | |
| DM412 | Starrett 769AXFL-1 TUBE MIC | 1 | |
| DM417 | Starrett 769MEAXFL-25 TUBE MIC | 1 | |
| DMCD12530-001 | FROM KIT P/N DLTFRPSKT3002 TUBE CUTTER, SIZE 3-6 QTY 1 | 1 | |
| ECFLED68-1 | ECFLED68 PC TUBE | 1 | |
| ECUB168-4 | ECUB168 PC TUBE | 1 | |
| EEFI5CL-2 | 6.2 IN PICK UP TUBE | 1 | |
| EKA320531290-1 | SLEEVE, FLARED, TUBE FITTING; CBS-8-1-N-16F SLEEVE | 2 | |
| F70300-1 | ADAPTER - DRIVE, FLAP TORQUE TUBE SPL-1679 | 24 | |
| FT1787-10B | TUBE FITTING 90° ELBOW HYDRAFLOW 24964 | 1 | |
| GFD165/80 | NDT X-RAY TUBE GFD165/80 | 1 | |
| GFD165/80. | NDT X-RAY TUBE GFD165/80 | 1 | |
| GS23413-1 | COMPRESSER TRANSFER TUBE SEAL ATR 72 (586F) | 17 | |
| GTD-800 | GUIDE TUBE SUPPORTS 6.1, 6.2 & 8.4MM Ø VIDEOPROBES | 1 | |
| GTN-430 | NON-ARTICULATING GUIDE TUBE VIDEOPROBE ACCESSORIE 3.0M (118.11”) 6.1MM (0.240”) | 1 | |
| GTR-601 | TUBE GUIDE 6 INCHES | 1 | |
| GTR6 | GTR6 RIGID TUBE KIT | 1 | |
| GUIDETUBE134279 | REPLACEMENT PLASTIC GUIDE TUBE FOR KIT 856A1310G01 | 1 | |
| HCS2044-30-01-120 | HEAT LAMPS, QUARTZ TUBE, 1600W, 120V, 13.33 AMP, METAL STAND WITH CASTERS AND GAS SPRING ARM | 1 | |
| HP-5000-6.5 | SADDLE TUBE 6.5 IN | 1 | |
| HP-5000-6.75 | SADDLE TUBE 6.75IN | 1 | |
| HRR683-2 | FORD GM FUEL DISCON 5/16 TUBE | 1 | |
| IAG-226-01 | CF6-50 HPC OIL TUBE PULLER | 1 | |
| IMP700F | 700-F PRECISION GEAR TUBE BENDER1/4”, 5/16”, 3/8”, 1/2”, 5/8” AND 3/4” O.D. TUBING" | 1 | |
| IV9620G | VIDEOSCOPE: IPLEX G SERIES INDUSTRIAL VIDEOSCOPE SCOPE UNIT FEATURES: · HIGHLY DURABLE CRUSH AND ABRASION RESISTANT TUNGSTEN BRAIDED INSERTION TUBE · DIAMETER: 6.00MM | LENGTH: 2.0M | SCOPE FLEXIBILITY: TAPERED FLEX · MAX ARTICULATION ANGLE: 150º UP/DOWN/ | 1 | |
| J382P06 | COUPLING TUBE WELDING 0.5625-18DIAMETER UNJF-3A THREADS/MATERIAL AMS 5645 | 1 | |
| JET20670 | Suction Tube H/D 670mm | 1 | |
| JMP/CF6/D/4037/TUBES | (Port & Starboard) CF6-80C2 Engine Probe Tubes Only | 1 | |
| JMP/CF6/D/4947/TUBES | (Port & Starboard) CF6-80E1 Engine Probe Tubes Only | 1 | |
| JMP/CFM56/D/4435/TUBES | (Port & Starboard) CFM56-2 & 5A Engine Probe Tubes Only | 1 | |
| JMP/CFM56/D/4462/TUBES | (Port & Starboard) CFM56-7 Engine Probe Tubes Only | 1 | |
| JMP/CFM56/D/4538/TUBES | (Port & Starboard) CFM56-3 Engine Probe Tubes Only | 1 | |
| JMP/CFM56/D/4605/TUBES | (Port & Starboard) CFM56-5B/C Engine Probe Tubes Only | 1 | |
| KB160-4 | ERESCO ISOVOLT 160, BERYLLIUM WINDOW TUBE, 160KV | 1 | |
| LTCT7202-01 | OIL TUBE FIXTURE PACKAGING: D-LM-008-036/SF-000 QAC:C | 1 | |
| MECHGTUBE-8832 | MECHANICAL GUIDE TUBE VIDEOPROBE ACCESSORIE 6MM (0.236”) X 12M (472.44”), W/WC | 1 | |
| MODEL 884FY-24 | ADAPTER KIT, 856NM 1/2 PITOT-STATIC TUBE PRESSURE TEST | 1 | |
| MS-ST-500 | SWAGELOK PRE-SWAGING TOOL, 5/16" TUBE OD | 1 | |
| MS21913D6 | PLUG - FLARELESS TUBE (AS5231W06 OR SIMILAR) | 19 | |
| MVIQAP6145-A | MVIQ HANDSET WITH DUAL CONTROLLER USER INTERFACE 3 MVIQAP6145-A MENTOR VISUAL IQ QUICK CHANGE INTERCHANGE VIDEO PROBE ARTICULATING GUIDE TUBE | 1 | |
| OTC314299 | TUBE (3.62 OD X 3.25 ID) | 1 | |
| P40951M-4 | Pitot tube adapter for Hawker HS125-600/700 & 800 | 1 | |
| PM70687-15 | PERSPEX TUBE 150MM DIA. 6MM WALL | 1 | |
| PROHEAT1-12 | 93609 TUBE BP 1/4" FL | 1 | |
| PROHEAT1-4 | 93610 TUBE BP 1/4" FL | 1 | |
| PROHEAT1-5 | 93612 TUBE BP 1/4" FL | 1 | |
| PWA102963 | TUBE GUIDE_330X51X25MM/.5KG_[PWA102963] | 1 | |
| PWA111085 | ENGINE ASSY, TEC, #5/6 BRG SCAVENGE TUBE | 1 | |
| PWA25406 | PULLER - IMC #1 BRG TRANSFER TUBE_[PWA25406] | 2 | |
| PWA27500 | PUSHER,PULLER - CSD TRANSFER TUBE_155X80X65MM/0.68KG_[PWA27500] | 4 | |
| PWA28462 | GAGE,POSITION - MGB CSD TRANSFER TUBE_[PWA28462] | 3 | |
| PWA86411 | PWA86411 GUIDE TUBE, AP-8 PORT | 11 | |
| PWC32271 | WASH TUBE FOR PT6-114 | 12 | |
| PWC34910-200 | Pratt & Whitney PWC34910-200 PT6 Engine Borescope Guide Tube | 12 | |
| PWC34910-400 | Pratt & Whitney PWC34910-400 PT6 Engine Borescope Guide Tube | 6 | |
| PWC34910-600 | Pratt & Whitney PWC34910-600 PT6 Engine Borescope Guide Tube | 10 | |
| PWC34910-802 | GUIDE TUBE T6 PORT / FLEXSIBLE | 11 | |
| PWC34910-804 | Pratt & Whitney PWC34910-804 PT6 Engine Borescope Guide Tube | 17 | |
| PWC47133 | PW617F-E SECONDARY FUEL TUBE, MODIFIED | 1 | |
| PWC54246 | PULLER/PUSHER, TUBES (ALTERNATIVE TO PWC32366) | 7 | |
| PWC56502-01 | GUIDE TUBE PWC56502-01 REV. B | 1 | |
| PWC7083 | TUBE WASHING TURBINE ASSY, PT6C-67C | 1 | |
| PWC72230 | WASH TUBE FOR PT6-140 | 5 | |
| RB072610-H-B | BELL 206L,407 SKIDTUBE ATTACHMENT | 2 | |
| RBW6305G01232-3G | TOOL,GIMBAL/TORQUE TUBE BUSHINGS REMOVAL (NSCM A0126) | 2 | |
| RIG36092 | TUBE BENDER 5/16 8MM | 1 | |
| RTWH36J | INT RATCH TUBE TQR ADAPT 9/16 | 1 | |
| RTWHM16J | INT RATCH TUBE TQR ADAPT 16MM | 1 | |
| S3160050106 | LASER MARKED TUBE CTECH4R600A | 1 | |
| S3160050107 | TUBE LASER CTECH4Z600A | 1 | |
| S3160050108 | LASER MARKED TUBE, ATECH4RS600 | 1 | |
| S3160050202 | LASER MARKED TUBE CTLNK4Z600 | 1 | |
| S3200003057 | TUBE ASSY SPP1906 DEMO | 1 | |
| S61725006 | TUBE- LASER MARK QD1RN6B | 1 | |
| S61833901 | TUBE LASER MARKED QD1RN6A | 1 | |
| S96820416 | TUBE LASER MARKED QD3R1600A | 1 | |
| SS-400-P | 316 STAINLESS STEEL PLUG FOR 1/4 IN. SWAGELOK TUBE FITTING | 1 | |
| SS400P | 316 STAINLESS STEEL PLUG FOR 1/4 IN. SWAGELOK TUBE FITTING | 1 | |
| ST009 | PIPING PLIER (TEFLON TUBE D6) | 1 | |
| ST2599A11140 | RATCH TUBE WRCH 9/16" BOEING | 1 | |
| ST2599A23170 | RATCH TUBE WRNCH 11/16 | 1 | |
| ST2599A26270 | RATCH TUBE WRNCH 11/16"BOEING | 1 | |
| ST878D | Kit - Preset Tube Fitting, "Sleeve Set", (Not For Titanium Tubing) (Set Of 25 Ea. Dies, Mandrels, & Clamps) (ST878D-3-020, ST878D-3-035, ST878D-4-020, ST878D-4-035, ST878D-5-020, ST878D-5-035, ST878D-6-020, ST878D-6-035, ST878D-8-028, ST878D-8-035, ST878 | 8 | |
| STD-1318 | HOSE - VACUUM, 1/4 INCH INSIDE DIAMETER (ID) PLASTIC TUBE (TYGON-B44-30PT, UNIFLEX 650SIMILAR) | 1 | |
| T-127A-A | TEEPIPETOTUBE3/16Tx1/8M&F-1PC | 1 | |
| T-181A-3 | NUT TUBE COUPLING 3/16 OD-6PCS | 1 | |
| T-181A-4 | NUT TUBE COUPLING 1/4 OD-6PCS | 1 | |
| T-35250 | BENDER TUBE 5/16IN | 1 | |
| T-35260 | BENDER TUBE 7/16IN | 1 | |
| T-41IS-3 | INVERTEDNUT TUBESTEEL3/16-5PCS | 1 | |
| T-41IS-5 | INVERTEDNUT TUBESTEEL5/16-5PCS | 1 | |
| T-48I-4A | ADAPTSTRTPIPETUBE1/4Tx1/8M-6PC | 1 | |
| T-49I-3A | ELBOW90PIPETUBE3/16Tx1/8MP-6PC | 1 | |
| T-49I-5A | ELBOW90PIPETUBE5/16Tx1/8MP-2PC | 1 | |
| T-60A-3 | SLEEVE COMP TUBE 3/16 OD-20PCS | 1 | |
| T-60A-5 | SLEEVE COMP TUBE 5/16 OD-24PCS | 1 | |
| T-61A-3 | NUT TUBE COUPLING 3/16 OD-6PCS | 1 | |
| T-61A-5 | NUT TUBE COUPLING 5/16OD-12PCS | 1 | |
| T-62A-33 | NIPPLE TUBE 3/16 OD-1PC | 1 | |
| T-62A-55 | NIPPLE TUBE 5/16 OD-1 PC | 1 | |
| T-64A-33 | TEE TUBE 3/16 OD-2PCS | 1 | |
| T-69A-3A | ELBOW90PIPETUBE3/16Tx1/8MP-2PC | 1 | |
| T-69A-4A | ELBOW90PIPETUBE1/4Tx1/8MP-6PCS | 1 | |
| T-69A-4B | ELBOW90PIPETUBE1/4Tx1/4MP-6PCS | 1 | |
| T-69A-5A | ELBOW90PIPETUBE5/16Tx1/8MP-6PC | 1 | |
| T-69A-5B | ELBOW90PIPETUBE5/16Tx1/4MP-4PC | 1 | |
| T-E1-5A | ELBOW90PIPETUBE5/16Tx1/8MP-2PC | 1 | |
| T-E1-5B | ELBOW90PIPETUBE5/16Tx1/4MP-1PC | 1 | |
| T-N1-5-161A | NUT TUBE COUPLING 5/16 OD-6PCS | 1 | |
| T-N1-6-161A | NUT TUBE COUPLING 3/8 OD-6PCS | 1 | |
| T-U1-4A | ADAPTSTRTPIPETUBE1/4Tx1/8M-6PC | 1 | |
| T-U1-4B | ADAPTSTRTPIPETUBE1/4Tx1/4M-6PC | 1 | |
| T-U1-6B | ADAPTSTRTPIPETUBE3/8Tx1/4M-6PC | 1 | |
| T-U2-4 | NIPPLE TUBE 1/4 OD-6PCS | 1 | |
| T-U2-5 | NIPPLE TUBE 5/16 OD-6PCS | 1 | |
| T300-112A | TKS T300-112A (FOR 3/16 IN. O/D TUBE) | 4 | |
| TEFLON 3/16ODX1/8ID | TUBE TPTFE 3/16ODX1/8ID | 1 | |
| TKS T300-112A | TKS T300-112A (FOR 3/16 IN. O/D TUBE) | 1 | |
| TM8X6 | METRIC CARBON STEEL TUBE 8MM OD X 6MM ID (PER FOOT) | 1 | |
| TM8X6-Z | HYDRAULIC TUBE M8X6 - ZINC | 1 | |
| TMH BRC21-52-02REP4 | TUBE 6.5ÕÕOD X 5ÕÕID 4140 ANN | 1 | |
| TMHBRC21-52-02REP4 | TUBE 65OD X 5ID 4140 ANN | 1 | |
| TQSG4R600-2 | TUBE, LASER MARK, TQSG4R600 | 1 | |
| TUBE-DRILL-JIG2 | TUBE DRILL JIG 3/16">3/8" | 1 | 3/8\"','Pa283','has been added to your tool request. Feel free to search for more tools before submitting your Tool Request. After you have added all of your tools, click on "Tool Request" in the main menu at the top of the page.','has already been added to your tool request. To update the quantity please go to the Tool Request page by clicking on "Tool Request" in the main menu at the top of the page. Otherwise, please feel free to search for more tools before continuing on to the Tool Request.');"> |
| TUBE1"1/4ODX1/4WX12"-6061T6 | TUBE 1"1/4 OD X 1/4 W X 12" ALUMINIUM 6061T6 | 1 | |
| TUBE3/8-TEFLON | TUBE TEFLON 3/8IDX7/16ODX 6MLG (19.73FT) | 1 | |
| TUBE5/8X16GA | TUBE ¿5/8Ó EXT X 16 Gauge x .6Ó lg | 1 | |
| TUBEMEC1026-6"ODX1/2"WALL | TUBE MEC 1026 6"OD X 1/2" WALL (PER INCH) | 1 | |
| TUBES GUIDE FOR CFM65-5B | TUBES GUIDE FOR CFM65-5B | 1 | |
| USA1000J-6-5000 | VIDEOSCOPE VJ-ADV 6.9 MM (5.0 MTR TUBE) | 1 | |
| VIC64A-60 | CONDUCTOR TUBE 60 | 1 | |
| VIK-150 | SONOBUOY TUBES PLUG SET (set of 16) | 1 | |
| W410X6TB | TUBE: TIRE,6IN,RUBBER, PSI-80,TREAD-SAWTOOTH PATTERN | 2 | |
| W5-30-8TB | TUBE: TIRE, USE W53066TB=3A | 1 | |
| WCI-EKA320531290-1 | SLEEVE, FLARED, TUBE FITTING; CBS-8-1-N-16F SLEEVE | 1 | |
| WINS430 | TUBE INSERTION 5/16IN 4IN L | 1 | |
| WINS830 | TUBE INSERTION 5/16IN 8IN L | 1 | |
| YA771B12 | 6IN RIDGED TUBE W COUPLER | 1 | |
| ZRISER | Suction Tube Telescopic(604mm to 1020mm) | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
