| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| C21003-36 | TUBE 5 | 1 | |
| C21003-37 | Tube 5 | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 01-1274-0030 | TRONAIR ATA-9 Custom Aircraft Towbar, 4-1/2 in Tube Dia, 144 in L, 35-3/8 in W, Blue | 3 | |
| 02-123R | Compact Tube Cutter (Cartridge capacity: 1/8" to 5/8" O.D.) (Add to cart: Add To Cart) | 1 | |
| 034-1519 | FUSE,CARTRIDGE;TUBE TYPE;2.0;250.0 AC;NORMAL INSTANTANEOUS;VISIBLE EL;35.0;NONRENEWABLE FUSIBLE EL;|20.0 MM;5.2 MM;NICKEL;5.1 MM;5.2 MM;FUSIBLE 2A 5X20 RAPIDE;F1780_P090518: CONDITIONNEMENT TOUT CONVIENT. F1780_P090518P: CONDITIONNEMENT 50; | 1 | |
| 04-368-FH | 90° Triple Header Tube Benders (Capacity: 1/8", 3/16" & 1/4" O.D.) (Add to cart: Add To Cart) (Capacity: 1/4", 5/16" & 3/8" O.D.) (Add to cart: Add To Cart) | 1 | |
| 044C003 | CENRIFUGE TUBE TO ASTME 707-80 FOR VISIBLE INK 0-15M | 1 | |
| 057840099 | Schrader 5784 High Pressure Strut Coupler - 716-20 thread for 14 tube - 5,000 PSIG | 2 | |
| 0851HL-ST-1 | 0851HLPITOT TUBE TEST ADAPTER | 1 | |
| 10FNU-S | Ferulok Tube End Cap 58 Steel | 1 | |
| 115-115 | Mitutoyo 115-115 Tube Micrometer 0-25mm | 1 | |
| 115-116 | Mitutoyo 115-116 Tube Micrometer 25-50mm | 1 | |
| 115-117 | Mitutoyo 115-117 Tube Micrometer 50-75mm | 1 | |
| 115-118 | Mitutoyo 115-118 Tube Micrometer 75-100mm | 1 | |
| 115-153 | Mitutoyo 115-153 Tube Micrometer 0-1" | 1 | |
| 115-215 | Mitutoyo 115-215 Tube Micrometer 0-25mm | 1 | |
| 115-216 | Mitutoyo 115-216 Tube Micrometer 25-50mm | 1 | |
| 115-217 | Mitutoyo 115-217 Tube Micrometer 50-75mm | 1 | |
| 115-218 | Mitutoyo 115-218 Tube Micrometer 75-100mm | 1 | |
| 115-242 | Mitutoyo 115-242 Tube Micrometer 1-2" | 1 | |
| 115-243 | Mitutoyo 115-243 Tube Micrometer 2-3" | 1 | |
| 115-253 | Mitutoyo 115-253 Tube Micrometer 0-1" | 1 | |
| 115-303 | Mitutoyo 115-303 Tube Micrometer 25-50mm | 1 | |
| 115-305 | Mitutoyo 115-305 Tube Micrometer 0-1", 2mm Dia. Pin Tip | 1 | |
| 115-308 | Mitutoyo 115-308 Tube Micrometer 0-25mm | 1 | |
| 115-313 | Mitutoyo 115-313 Tube Micrometer 0-1" | 1 | |
| 115-314 | Mitutoyo 115-314 Tube Micrometer 0-1" | 1 | |
| 115-315 | Mitutoyo 115-315 Tube Micrometer 0-25mm | 1 | |
| 115-316 | Mitutoyo 115-316 Tube Micrometer 0-25mm, 8.2mm Dia. Cylindrical Tip | 1 | |
| 1177-511 | 1177-511 TUBE ALIGNMENT PIN | 1 | |
| 131.11 | BOURDON TUBE PRESSURE GAUGE STAINLESS STEEL COMPACT VERSION NS 40 (1 1/2"), 50 (2") AND 63 (2 1/2") | 1 | |
| 139-001 | Mitutoyo 139-001 Extension Tube Inside Micrometer 100-125mm | 1 | |
| 139-002 | Mitutoyo 139-002 Extension Tube Inside Micrometer 4-5" | 1 | |
| 139-173 | Mitutoyo 139-173 Extension Tube Inside Micrometer 100-500mm | 1 | |
| 139-175 | Mitutoyo 139-175 Extension Tube Inside Micrometer 100-1300mm | 1 | |
| 139-180 | Mitutoyo 139-180 Extension Tube Inside Micrometer 4-52" | 1 | |
| 140-158 | Mitutoyo 140-158 Extension Tube Inside Micrometer 1000-3000mm | 1 | |
| 140-159 | Mitutoyo 140-159 Extension Tube Inside Micrometer 1000-4000mm | 1 | |
| 140-160 | Mitutoyo 140-160 Extension Tube Inside Micrometer 1000-5000mm | 1 | |
| 15000 PSI Gauge | McDaniel Controls Inc Pressure 0 15000 PSI Gauge 316 SS Tube and socket | 1 | |
| 15L16835 | 15 Foot Tow Bar Tube | 1 | |
| 173785 | CHARGING ADAPTER 5/16 TUBE | 9 | |
| 18821-3 | H145 PITOT TUBE ADAPTER | 4 | |
| 195-05 | WRENCH, TUBE RAPID ACTION RATCHET, 5/16 | 1 | |
| 1C6344 | TORQUE ADAPTER SET AIR TUBE COUPLING FMF LM2500 | 1 | |
| 1C6952 | WRENCH, SPANNER - OIL TUBE NO.5 BRG. | 1 | |
| 1C6952 REV A | WRENCH, SPANNER - OIL TUBE NO.5 BRG. | 1 | |
| 1C6952P01 | WRENCH,SPANNER-OIL TUBE-NO 5 BRG | 1 | |
| 1C6953 | PULLER, OIL TUBE- NO 5 BRG | 1 | |
| 1C6953G02 | Puller, Oil Tube No. 5 Bearing | 1 | |
| 1X8-12-CS | BOUCHON CONIQUE DE TUBE 1 DIA 8 12 BWG DIA MIN0680 DIA MAX0800 LONGUEUR3500 MATRIEL ACIER CARBONE 1018-1020 | 1 | |
| 2000468 | G200 towbar head for Gulfstream G150/G200/G250/G280/Galaxy/Dornier 328/Envoy 3. 60" aluminum extension tube with head attachment. Extension allows sufficient clearance under nose of aircraft to use with standard length towbar, eliminating the need for a | 1 | |
| 2001153 | Rx towbar for Lockheed Martin C-130 Series aircraft family. Heavy duty steel towbar features linear & radial shear protection, hydraulic lift kit, road speed rated wheels-hubs and bearing. 15 foot long towbar ships fully assembled except for tube haves | 1 | |
| 2001371 | Helicopter Towbar for BELL UH-1, AH-1, 205, 212 AND 412 TYPES and Eurocopters (except AS-365 & EC-155)-Skid tube diameter: 3 1/4" to 4 1/2"-Length: 140", legs can be split into 4 pcs. of 5 1/2 ft. for easier transport-Skid spread: 25" to 120"-Weight: 155 | 1 | |
| 2001372 | Helicopter REAR Towbar for BELL UH-1, AH-1, 205, 212 AND 412 TYPES and Eurocopters (except AS-365 & EC-155)-Skid tube diameter: 3 1/4" to 4 1/2"-Length: 140", legs can be split into 4 pcs. of 5 1/2 ft. for easier transport-Skid spread: 25" to 120"-Weight: | 1 | |
| 2001382 | Military/civilian helicopter towbar for BELL UH-1, 205, 212, 412 Types.Designed for one man operation. This tow bar is designed for the Bell Helicopters with the 4" skid tubes and 2" tow rings. This towbar eliminates the need for a man on the stinger. Th | 1 | |
| 2001384 | towbar designed to fit the Bell 206, OH-58 and MD500 types with skid tube aft of cross tube for hook up. his tow bar can also be used for pulling from the front and is very similar to 002090 with the exception it is longer and pulls the tail down to get | 1 | |
| 2001385 | Helicopter REAR towbar designed to fit the Bell 206, OH-58 and MD500 types with skid tube aft of cross tube for hook up. his tow bar can also be used for pulling from the front and is very similar to 002090 with the exception it is longer and pulls the t | 1 | |
| 2001396 | Hydraulic helicopter ground handling wheels for Bell 214ST and other military aircraft.The 002105 are caster wheels for helicopters with fitting on the forward ends of the skid tubes.Specifications: Bell 214ST and other military aircraft Skid tube dia. 4. | 1 | |
| 2001522 | F-16 Fighter Jet Towbar: Specifically designed to tow the Lockheed F-16. Consists of an TB125-2R 20' and head assembly.*The wheels can be positioned on the tow bar tube so the head pins are at the axle height when the front caster wheels are on the groun | 1 | |
| 2002755 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 3" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002756 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 8" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002758 | Oxygen Charge Adapter Combo- 2500 PSI Max- 1/4 Male NPT Inlet connection- Male NPT Inlet connection- 9/16-18UNF male inlet connected by 1" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2003315 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 1" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2024875-1000 | PRESSURE DROP TUBE (P/O P/NO. 2024875-1) | 1 | |
| 2024875-1001 | PRESSURE DROP TUBE (P/O P/NO. 2024875-1) | 1 | |
| 20662155 | DU-Full Color Display Unit FCD55 Cathodic Tube | 6 | |
| 28044TB-P | TUBE: TIRE,2.80X250, | 2 | |
| 28044TBP | TUBE: TIRE,2.80X250, | 2 | |
| 2A1212 | TUBE — TRANSFER, PACKING, NO. 5 BRG | 1 | |
| 2A2210 | TUBE, ELBOW, NO.5 BEARING | 1 | |
| 2A2231-01 | TUBE - PRESS, NO.5BRG, ASSY OF | 1 | |
| 2A3091-01 | TUBE — PRESS, NO. 5 BRG, ASSY OF | 1 | |
| 2C6058 | WRENCH, SPANNER - OIL TUBE, BRG 5 | 1 | |
| 2C6058G04 | WRENCH, SPANNER - OIL TUBE, BRG 5 | 1 | |
| 2C6084G04 | LIFT FIXTURE - NO.#5 RET. NUT/OIL TUBE | 1 | |
| 2C6092G02 | WRENCH SPANER PRES TUBE;CF6-6/-50 | 1 | |
| 2C6948P06 | BOROSCOPE GUIDE TUBE 9.5MM (GTD-600) | 3 | |
| 2PRE65B94600 | PROTECTIVE SHIELD - COOLING TUBES, CF6-50 ENGINE TURBINE | 3 | |
| 35-92678-0001 | FLEXIBLE DRAIN TUBE 35-92677-0001 | 1 | |
| 364-FHA-04 | BENDER, TUBE HAND, .25” | 1 | |
| 364-FHA-06 | BENDER, TUBE HAND, .375” | 1 | |
| 364-FHA-10 | BENDER, TUBE HAND, .625” | 1 | |
| 364-FHA-12 | BENDER, TUBE HAND, .75” | 1 | |
| 368-FH | Lever Type Triple Header Tube Benders - (for 1/4", 5/16" and 3/8" tubing) | 1 | |
| 383C-20R-450 | RATCH TUBE WRENCH 1-1/4 -450IN | 1 | |
| 3929 | 757 APU BOROSCOPE GUIDE TUBE TOOL | 1 | |
| 30651.00 | ONE HANDED GREASE GUN, 400/500CCM, WITH PISTON, 1/8 BSP CONNECTIONS, RIGID ANGLED TUBE CONNECTOR 180 | 2 | |
| 3065000 | ONE HANDED GREASE GUN, 400/500CCM, WITH PISTON, 1/8 BSP CONNECTIONS, RIGID ANGLED TUBE CONNECTOR 180 | 1 | |
| 3065100 | ONE HANDED GREASE GUN, 400/500CCM, WITH PISTON, 1/8 BSP CONNECTIONS, RIGID ANGLED TUBE CONNECTOR 180 | 2 | |
| 395-351 | Mitutoyo 395-351 Digimatic Tube Micrometer 0-25mm / 0-1" | 1 | |
| 395-352 | Mitutoyo 395-352 Digimatic Tube Micrometer 25-50mm / 1-2" | 1 | |
| 395-353 | Mitutoyo 395-353 Digimatic Tube Micrometer 50-75mm / 2-3" | 1 | |
| 395-354 | Mitutoyo 395-354 Digimatic Tube Micrometer 75-100mm / 3-4" | 1 | |
| 395-362 | Mitutoyo 395-362 Digimatic Tube Micrometer 0-25mm / 0-1" | 1 | |
| 395-363 | Mitutoyo 395-363 Digimatic Tube Micrometer 0-25mm / 0-1" | 1 | |
| 395-364 | Mitutoyo 395-364 Digimatic Tube Micrometer 0-25mm / 0-1" | 1 | |
| 395-371 | Mitutoyo 395-371 Digimatic Tube Micrometer 0-25mm / 0-1" | 1 | |
| 395-372 | Mitutoyo 395-372 Digimatic Tube Micrometer 25-50mm / 1-2" | 1 | |
| 395-373 | Mitutoyo 395-373 Digimatic Tube Micrometer 50-75mm / 2-3" | 1 | |
| 395-374 | Mitutoyo 395-374 Digimatic Tube Micrometer 75-100mm / 3-4" | 1 | |
| 400630686 | SPANNER - TUBE (MV7632-5-36) | 1 | |
| 40555-102K-22 | LOWER HANDRAIL TUBE FOR 18500 | 1 | |
| 41-101 | Extension Tube - for 42-500 | 2 | |
| 416M90 | NORTON TUBE BRUSH: NYLON BRISTLE, 1.25 IN BRUSH DIA, 1/2 IN BRUSH LG | 1 | |
| 42/674 | A350 NLG SLIDING TUBE R/I HOIST | 1 | |
| 43/1123 - K1425 | 43/1123 - K1425 (297 M/M 180° OFFSET EXTENSION TUBE) | 1 | |
| 458481 | GENERATOR-FOG_KIT-SMOKE TUBE_[458481] | 6 | |
| 460001682-36 | SPANNER - GLANDSEAL TUBE MLG (MV7632-5-09) | 1 | |
| 460007026-2 | REACTOR-TUBE - DIA.114 X 578 MM | 4 | |
| 470-FH | 180° Triple Header Tube Bender (Range: 11/16" (1/4"), 1-1/8" (3/8"),) (Radius to center of tube: 1-1/2" (1/2")) (Capacity: 1/4", 3/8"& 1/2" O.D.) (Add to cart: Add To Cart) (Range: 7/16" (3/16"), 9/16" (1/4"),) (Radius to center of tube: 11/16" (5/16"), 1 | 3 | |
| 50415K175 | METRIC TUBE 10MM OD X 9MM ID X .5 METERS STAINLESS STEEL | 1 | |
| 506 TB | TUBE BENDING TOOL 3/8-15/16 | 1 | |
| 50J914 | TUBE TRANSFER SEAL RING (1.3075 X 1.600) | 1 | |
| 5100S157 | DEICER BOOT PRIMER KIT 5100S157 (4 GLASSTUBES OF 706075 PRIMER SOLUTION ) -PRIMER KIT | 1 | |
| 5175 | KIT - HAND SWAGING, PORTABLE (1/4 , 3/8, 1/2 INCH TUBE CAPACITIES), USE P/N 5720, FOR 5/8 THRU 1 1/2 TUBE DIAMETERS. (STANLEY HARRISON CORP.) | 1 | |
| 5175K-200 | KIT - HAND SWAGING, PORTABLE (1/4 , 3/8, 1/2 INCH TUBE CAPACITIES), USE P/N 5720K-200, FOR 5/8 THRU 1 1/2 TUBE DIAMETERS. | 2 | |
| 5305427 | ADAPTER ASSY OF TUBE TO BOSS,OIL SUPPLY #5-6 BEARING | 1 | |
| 5642-1035 | DRAWBOLT .250 TUBE OD | 1 | |
| 5645-1049 | DRAWBOLT .500 TUBE OD | 1 | |
| 5647-1035 | DRAWBOLT .750 TUBE OD | 1 | |
| 5720K-200 | KIT - HAND SWAGING, PORTABLE (5/8 TO 1-1/2 TUBE SIZE) | 1 | |
| 573-661 | Mitutoyo 573-661 ABSOLUTE Digimatic Tube Thickness Caliper 0-150mm | 1 | |
| 573-761 | Mitutoyo 573-761 ABSOLUTE Digimatic Tube Thickness Caliper 0-150mm / 0-6" | 1 | |
| 5902-1020 | DRAWBOLT .375 TUBE O.D | 1 | |
| 600-F | BENDER, TUBE HAND, .25” - .75” | 1 | |
| 67220647-2 | PRESSURE DROP TUBE (P/O P/NO. 7416805-1) | 1 | |
| 703A95-0535-00 | FUEL DUMP TUBE [AS365 - EC155] | 2 | |
| 71006 | Valco Cincinnati 71006 Tube-Grip 2.5 Industrial Size Dispenser | 2 | |
| 7007752 | FLEX & STAY GUIDE TUBE: PART NO.7007752 FOR 6MM DIAMETER FLEXIBLE SCOPE, 4M FOR TURBINE APPLICATIONS | 1 | |
| 70200-40 | BOELUBE 3.5 OZ PUSH TUBE (SOLID) | 1 | |
| 754900-35 | DEAD-BLOW MALLET WITH STEEL TUBE HANDLE 35MM | 1 | |
| 757-MAIN-FLAP-DOLLY | 757 MAIN FLAP TORQUE TUBE TOOL | 1 | |
| 856A1351P0 | CUSTOM GUIDE TUBE FOR CFM56 | 1 | |
| 856A1351P01 | CUSTOM GUIDE TUBE FOR CFM56 | 14 | |
| 856A1612 | ADAPTER SET, SPANNER AIRTUBE NUTS ( 5 WRENCH SET) | 1 | |
| 856A1612 REV D | ADAPTER SET, SPANNER AIRTUBE NUTS ( 5 WRENCH SET) | 1 | |
| 856A3793G02 | FIXTURE - PUSHER/PULLER TUBE CENTRE VENT CFM-5B-5B | 15 | |
| 8777 | SEMI-AUTOMATIC ROLLER SWAGE MACHINE (1/4" TO 5.0" TUBE SIZE) | 1 | |
| 8817027000 | TUBE FOR OIL PRESSURE TAPPING FROM MODULE 05 (REAR CHECK POINT) | 1 | |
| 89965K52 | TUBE ALLOY 6061 1/2"ODX.035WALL -72"LG | 1 | |
| 89965K62 | TUBE 6061-T6 ALUM 3/4 OD X 0.035 WALL X 6' FLAREABLE | 1 | |
| 906-5819 | Flashtube lamp 35S for Strobex 135M | 1 | |
| 98A27608017102 | TUBE DIA 20 X 3,5 X 680 DIN 2391 | 1 | |
| 98D26203001046 | BOUCHON φ15.9 TUBE | 1 | |
| 9C3138G01 | TWO PIECE GUIDE TUBE EXTENSION (TUBE EXTENSION GUIDE) WHEN PERFORMING Q/T IN A 9C6025 STAND, ALTERNATIVE TOOL TO 9C3138G02 | 1 | |
| 9C3138G02 | ONE PIECE GUIDE TUBE EXTENSION (TUBE EXTENSION GUIDE) WHEN REWORKING IN 9C6025 STAND | 1 | |
| A158068-501 | KIT BLEED AIR TUBE EMB195 | 5 | |
| AA72 | Meyer Hydraulic AA72 Extension Inner Slide Tube (51 to 72) for ATS Tail Stand | 1 | |
| AB 30651.00 | ONE HANDED GREASE GUN, 400/500CCM, WITH PISTON, 1/8 BSP CONNECTIONS, RIGID ANGLED TUBE CONNECTOR 180 | 1 | |
| AC 20-1005P-02L-600# | commercial pressure gauge, 2.5in dial, black ABS case, bronze tube, 1/4in NPT lower connection, 0-600PSI range | 1 | |
| AC 25-1001TH-01B-XUC-160# | panel pressure gauge, 2.5in dial, steel case, bronze tube, 1/8in NPT back connection, U clamp, 0-160PSI range | 1 | |
| AC 25-1009AW-02L-XC4-300# | DURALIFE TYPE 1009 GAUGE 1.0 2.5in Dial, SS Case & Tube, Bronze Socket (Dry), 1/4in NPT lower Conn., Individual Certified Calibration Chart, 0-300PSI Range" | 1 | |
| AC 25-1009AW-02L-XC4LL-1000# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in lower connection, calibration cert, Plus! option, 0-1000PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-30# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-30PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-300# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-300PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-60# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-60PSI range | 1 | |
| AC 25-1009SW-02L-X6BC4LL-4000#/BR | 2.5in dial, 304SS case, 316SS Bourdon tube & socket, 1/4in MNPT lower connection, cleaned for gaseous oxygen, calibration cert, Plus! performance option, 0-4,000PSI/Bar range" | 1 | |
| AC 25-1009SW-02L-XC4LL-100# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, Plus! option, 0-100PSI range | 1 | |
| AC 25-1009SW-02L-XC4LL-10000# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, Plus! option, 0-10,000PSI range | 1 | |
| AC 25-1009SW-02L-XC4LL-3000# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 35-1009SW-02B-XC4LL-5000# | pressure gauge, 3.5in dial, SS case, 316SS tube, 1/4in NPT lower back connection, calibration cert, Plus! option, 0-5,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-10000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-3000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-4000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-4,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-5000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-4,000PSI range | 1 | |
| AC 45-1279SS-04L-XLL-5000# | 4.5IN Phenol Case316SS 1.0 Tube & Socket, 1/2in NPT Lower Connection, Plus! Performance Option, 0-5000PSI Range, Upc: 723259263407 | 1 | |
| AC 50-1008S-02L-600# | pressure gauge, 50mm (2in) dial, SS case, 316SS tube, 1/4in NPT lower connection, 0-600PSI range | 1 | |
| ADA00029 | TUBE 3/8x 5/8 | 1 | |
| ADAEH101-945 | PITOT TUBE BENCH EQUIPMENT P/N ADAEH101-945 FOR SH-101A HELICOPTERS | 2 | |
| ADTS405-4203 | PITOT TUBE BENCH P/N ADTS405-4203 FOR SH-101A HELICOPTERS | 1 | |
| AF-5173/2.25mm | Custom eddy current encircling probe for 2.25mm tube (outer diameter), inner diameter of coil housing 2.5mm, 50kHz – 500kHz, bridge differential, triax connector, include test report and certificate of conformance. | 1 | |
| AF-5173/4MM | Custom Eddy Current Encirling Probe, 4mm tube (outer diameter), 50KHz-500kHz, bridge differential, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5173/7.5mm | Custom eddy current encircling probe for 7.25mm tube (outer diameter), inner diameter of coil housing 7.5mm, 50kHz – 500kHz, bridge differential, triax connector, include test report and certificate of conformance. | 1 | |
| AGE70476 | APS5000 2ND STG BORESCOPE GUIDE TUBE | 3 | |
| AN815-4C | FLARED TUBE UNION (5 REQUIRED) | 1 | |
| AN929-4 | CAP ASSY-.25 TUBE-PRESS. SEAL | 10 | |
| AN929-5J | CORROSION RESISTANT STEEL, 5/16", TUBE CAP | 12 | |
| APN-93-6/7L | SURFACE PROBE SHIELDED 1/8" DIA TUBE 90 DEGREE, .300" DROP, 6.0" LONG 7 PIN LEMO CONNECTOR 50-500KHZ Includes Test Report and Certificate of Conformance | 1 | |
| ARP-.250/1.1-500HZ-5K | Handheld Detachable Probe w/o Cable; Model: RNG = Detachable Ring Probe with Reflection (Driver Pick-up Coils) ; Item Diameter: 0.250in (6.4mm); Tube ID: ; Coil: #= Special; Poly Type: None; Length: No cable; Connector: 1 Pin Female Triaxial Connecto... | 1 | |
| ARTPX-008 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.375in (10mm); Tube ID: 0.375-0.437in (9.53-11.1mm); Coil: 1000= 100-2000 kHz; Poly ... | 1 | |
| ARTPX-029 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.750in (19mm); Tube ID: 0.750-0.875in (19.05-22.23mm); Coil: 1000= 100-2000 kHz; Pol... | 1 | |
| ARTPX-030 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.875in (22mm); Tube ID: 0.875-1.000in (22.23-25.4mm); Coil: 1000= 100-2000 kHz; Poly... | 1 | |
| AS5231J10 | PLUG - HYDRAULIC PRESSURE TUBE, 5/8 INCH LINE, CORROSION RESISTANT STEEL | 1 | |
| AS5231W06 | PLUG - FLARELESS TUBE (AS5231W06 OR SIMILAR) | 2 | |
| ASAPTC58 | ASA Pitot Tube Cover 5/8" Dia. Bright Red/White Plastic ASAPTC58 | 1 | |
| AT32533 | TUBE: JACK EXTENSION,SLIDE, FOR JACK MODEL# A325B | 2 | |
| AT42734 | TUBE: SLIDE,JACK,34IN TO 53IN, FOR A427 JACK | 2 | |
| AT43434 | TUBE: SLIDE,JACK,34IN TO 58IN, FOR A434 JACK | 2 | |
| AT43454 | TUBE: SLIDE,JACK,54IN TO 78IN, FOR A434 JACK | 2 | |
| ATEC01 | MEYER HYDRAULICS Slide Tube, For A519, A627 or A427 28 to 47 in Range Aircraft Jacks | 2 | |
| ATI560R10 | 12IN RIGID TUBE-USED W/ATI560C | 1 | |
| ATP-VJ-69-1500 ADV | VIDEOSCOPE VJ-ADV 6.9 MM (1.5 MTR TUBE) | 2 | |
| ATP-VJ-69-5000 ADV | VIDEOSCOPE VJ-ADV 6.9 MM (5.0 MTR TUBE) | 3 | |
| ATPNR-903-6 | Handheld Detachable Pencil Tip Probe 90° Degrees, ABS Shielded, Reflection, Diameter: 0.125in (3mm); Tube ID, 0.030" inch (0.8mm) Drop, Frequency: 50-500 kHz, 6.0in (152mm); Supplied with a Triaxial Fischer Connector. Includes Test Report and Certifica | 1 | |
| B-4-HC-A-40 1 | TUBE ADAPTER (0.250 IN. (6,35 MM)) | 1 | |
| B-4-HC-A-401 | TUBE ADAPTER (0,250 IN.) | 1 | |
| B-400-1-2 | O-SEAL PIPE THREAD CONNECTOR (0250IN. TUBE X -.125 IN. – 27 ANTP THREAD) | 3 | |
| B-400-1-2-OR | O-SEAL PIPE THREAD CONNECTOR (INTERNAL LEAKAGE TEST) (0.250 IN. TUBE X 0.125 IN. – 27 ANPT THREAD) | 1 | |
| B0RESC0PEGUIDEKIT | CFM56-7B BORESCOPE HPT GUIDE TUBES | 1 | |
| BACC14AD-04 | ASSEMBLY - CAP, PRESSURE SEAL, FLARELESS TUBE (STANDARD MS9513-04 OR BACC14AD-04) | 1 | |
| BACP20AU10D | PLUG - FIRE BOTTLE DISCHARGE TUBE, 5/8 INCH LINE, ALUMINIUM | 4 | |
| BACP20AU10J | PLUG - HYDRAULIC PRESSURE TUBE, 5/8 INCH LINE, CORROSION RESISTANT STEEL | 1 | |
| C0004 | LOCK - INTERMEDIATE TORQUE TUBE (MV7627-5-13) | 1 | |
| C0006A | TOOL - TORQUE TUBE RIGGING ELEV. SYST (MV7627-5-14) | 1 | |
| C21003-37 | TUBE 5 (OPP -36) | 1 | |
| C27022-1 | SET, CLAMP TRAILING EDGE FLAP TORQUE TUBE / MFC: 81205 | 16 | |
| C32042-61 | SPL-9505, EQUIPMENT - REMOVAL/INSTALLATION, MLG ORIFICE TUBE AND METERING PIN | 12 | |
| C32051-13 | 5/8 Hydr Tube Adptr Assy | 1 | |
| CDI96820401S | HAND STAMP TUBE FOR QD3R250 | 1 | |
| CH1543-0040 | SEAL GUIDE FOR O-RING INSTALLATION OF GUIDE TUBE ASSY (P/N CH1543A0011) | 1 | |
| CH1543-0042 | PRESSURE BLANKING PLUG FOR CONDUCTING TEST ON GUIDE TUBE ASSY (P/N CH1543A0011) | 1 | |
| CP828 | Chicago Pneumatic® Ratchet Wrenches (Tube outer diameter: 10-50 ft-lbs) (Rpm: 150) (Overall length: 10" (254 mm)) (Square drive: 3/8") (Add to cart: Add To Cart) | 1 | |
| CP828H | Chicago Pneumatic® Ratchet Wrenches (Tube outer diameter: 10-50 ft-lbs) (Rpm: 150) (Overall length: 10" (254 mm)) (Square drive: 3/8") (Add to cart: Add To Cart) (Tube outer diameter: 10-50 ft-lbs) (Rpm: 150) (Overall length: 10" (254 mm)) (Square drive: | 1 | |
| D-74955-118000 | IAI-STD-TUBE HEAD FROOVE-5IN-2 NOTCH-STL | 1 | |
| D12530-001 | TUBE CUTTER ASSY - SMALL (0.250 IN. - 0.375 IN.) | 12 | |
| D12531-001 | TUBE CUTTER ASSY - SMALL (0.500 IN. - 0.750 IN.) | 11 | |
| D12532-001 | TUBE CUTTER ASSY - LARGE 1.000 IN. - 1.500 IN. | 10 | |
| DAT08AEFKT5001 | KIT - AXIAL SWAGE TUBE REPAIR WITH PUMP, 5000 PSI | 5 | |
| DC062 | Starrett 569AXP TUBE MIC | 1 | |
| DC068 | Starrett 569BXP TUBE MIC | 1 | |
| DC082 | Starrett 569MAXP TUBE MIC | 1 | |
| DC092 | Starrett 569MBXP TUBE MIC | 1 | |
| DLT05PSTU3004 | TUBE 0.250 X 0.020 X 12 | 1 | |
| DLT30PSTU3012 | TUBE 0.750 X 0.039 X 12 | 1 | |
| DLT30PSTU3016 | TUBE 1.00 X 0.052 X 12 | 1 | |
| DLTFRPSKT3001 | 5KIT REPAIR TUBE HYD | 13 | |
| DM417 | Starrett 769MEAXFL-25 TUBE MIC | 1 | |
| EAA0304G69A | MANI REV TUBELS INFLTR 4025382 | 1 | |
| EEDF50310 | M14X1.5 BANJO W/YELLOW TUBE | 1 | |
| EEDF5038 | M12X1.5 BANJO W/YELLOW TUBE | 1 | |
| EEDF5039 | M12X1.5 BANJO W/TUBE SIDE PORT | 1 | |
| FEDREX 140 | YXLON X-RAY TUBE - FEDREX 140, HAVING A FOCAL SPOT SIZE OF 0.059 IN X 0.059 IN (1.5 MM X 1.5 MM) AND A KV RANGE OF 50 TO 140 KVP AT 5MA MAXIMUM. | 1 | |
| GFD165/80 | NDT X-RAY TUBE GFD165/80 | 1 | |
| GFD165/80. | NDT X-RAY TUBE GFD165/80 | 1 | |
| GS23413-1 | OIL TRANSFER TUBE ATR 42-500 | 17 | |
| GS23423-1 | COMPRESSER TRANSFER TUBE SEAL ATR 42 -500 | 1 | |
| GUIDETUBE134279 | REPLACEMENT PLASTIC GUIDE TUBE FOR KIT 856A1310G01 | 1 | |
| H150E-1000-19 | H150E HELIPORTER - ALL POCKET (CROSSTUBE LIFT) | 1 | |
| H150E-1000-20 | H150E HELIPORTER - ALL POCKET W/ POWER STEERING (CROSSTUBE LIFT) | 1 | |
| H250E-1000-3 | H250E HELIPORTER - ALL POCKET (CROSSTUBE LIFT) | 1 | |
| HP-5000-11.5 | SADDLE TUBE 11.5 IN | 1 | |
| HP-5000-12.25 | SADDLE TUBE 12.25 IN | 1 | |
| HP-5000-13.875 | SADDLE TUBE 13.875 IN | 1 | |
| HP-5000-3.5 | SADDLE TUBE 3.5IN | 1 | |
| HP-5000-4.5 | SADDLE TUBE 4.5" | 1 | |
| HP-5000-5 | SADDLE TUBE 5 IN | 1 | |
| HP-5000-5.5 | SADDLE TUBE 5.5 IN | 1 | |
| HP-5000-5.75 | SADDLE TUBE 5.75 IN | 1 | |
| HP-5000-6.5 | SADDLE TUBE 6.5 IN | 1 | |
| HP-5000-6.75 | SADDLE TUBE 6.75IN | 1 | |
| HP-5000-8.5 | SADDLE TUBE 8.5 IN | 1 | |
| HP-5000-9.125 | SADDLE TUBE 9.125 IN | 1 | |
| HP-5000-9.25 | SADDLE TUBE, 9.25 IN | 1 | |
| HP-5000-9.5 | SADDLE TUBE 9.5IN | 1 | |
| HRR683-2 | FORD GM FUEL DISCON 5/16 TUBE | 1 | |
| HTE29671 | PRESSURE TEST FIXTURE FOR CONDUCTING TEST ON GUIDE TUBE ASSY (P/N CH1543A0011) | 1 | |
| HU28856-1 | Shaft - Drawbar & Guide, LP Compressor Shaft Oil Tube - RB211-535E4 Engine | 1 | |
| HU28858 | Installer, Cupwasher & Retaining Nut, Center Oil Tube - RB211-535E4 | 1 | |
| HU28859 | Spanner - Retaining Nut, Center Oil/Signal Tube - RB211-535E4 Engine | 1 | |
| HU38837 | SPL-2352 PLIERS - CRIMPING, SEALING WASHER AND NOZZLE FEED TUBE | 10 | |
| IAE1R18593-1 | V2500 TUBE REPAIR KIT PRESSURE TOOLING KEY AUDIT PURPOSE | 1 | |
| IAE2J12030 | (GUIDE TUBE LPC 1.5 BOROSCOPE) | 10 | |
| IAE2P16024 | TUBE, BOROSCOPE GUIDELHT Dwg No.(537250001) | 1 | |
| IAE2P16204 | TUBE, BORESCOPE GUIDELHT Dwg No.(537250001) | 13 | |
| IAE4J12034 | TUBE WATER WASH V2500 | 15 | |
| IAG-226-01 | CF6-50 HPC OIL TUBE PULLER | 1 | |
| IMP700F | 700-F PRECISION GEAR TUBE BENDER1/4”, 5/16”, 3/8”, 1/2”, 5/8” AND 3/4” O.D. TUBING" | 1 | |
| IV9620G | VIDEOSCOPE: IPLEX G SERIES INDUSTRIAL VIDEOSCOPE SCOPE UNIT FEATURES: · HIGHLY DURABLE CRUSH AND ABRASION RESISTANT TUNGSTEN BRAIDED INSERTION TUBE · DIAMETER: 6.00MM | LENGTH: 2.0M | SCOPE FLEXIBILITY: TAPERED FLEX · MAX ARTICULATION ANGLE: 150º UP/DOWN/ | 1 | |
| Isovolt Titan 225 | X−ray instrument unipolar tube 225 kv maximum tube voltage (GE) | 1 | |
| J1701501 | 50.1 GREASE PUMP 480mm TUBE | 1 | |
| J1701502 | 50.1 GREASE PUMP 730mm TUBE | 1 | |
| J27027-130 | TUBE CUTTER ASSY - SMALL (0.250 IN. - 0.375 IN.) | 3 | |
| J27074-1 | SPANNER WRENCH-TORQUE TUBE_DIA 5.890 INCH_13.5X8X0.5_5 LBS_[J27074-1] | 10 | |
| J382P06 | COUPLING TUBE WELDING 0.5625-18DIAMETER UNJF-3A THREADS/MATERIAL AMS 5645 | 1 | |
| J500/DRUM PUMP | 5:1 AIR OPERATED DRUM PUMP/940mm TUBE | 1 | |
| JHW43603 | MINI TUBE CUTTER 5/8 CAPACITY | 1 | |
| JMP/CFM56/D/4435/TUBES | (Port & Starboard) CFM56-2 & 5A Engine Probe Tubes Only | 1 | |
| JMP/CFM56/D/4462/TUBES | (Port & Starboard) CFM56-7 Engine Probe Tubes Only | 1 | |
| JMP/CFM56/D/4538/TUBES | (Port & Starboard) CFM56-3 Engine Probe Tubes Only | 1 | |
| JMP/CFM56/D/4605/TUBES | (Port & Starboard) CFM56-5B/C Engine Probe Tubes Only | 1 | |
| JMP/GE90-115B/D/4949/TUBES | (Port & Starboard) GE90-115b Engine Probe Tubes Only | 1 | |
| JMP/RB211/D/4153/TUBES | (Port & Starboard) RB211-535E4 Short Engine Probe Tubes Only | 1 | |
| JMP/TRENT/D/6188/TUBES | (Port & Starboard) Trent 500 Short Engine Probe Tubes Only | 1 | |
| JMP/V2500/D/4040/TUBES | (Port & Starboard) V2500 Engine Probe Tubes Only | 1 | |
| KXR-0003-0 | XRAY TUBE - KXR-0003-0 ΜGEMX-200 KIT (50-200 KV) | 1 | |
| LIL71820 | TUBE 4.3 X 25MM | 1 | |
| LIL71830 | TUBE 3.75 X 25MM | 1 | |
| LIL71840 | TUBE 3.0 X 25MM | 1 | |
| LTCT7202-01 | FIXTURE, HOLDING NO. 4 AND 5 BEARING OIL TUBE | 1 | |
| M444000 | PW125 AND PW127 GUIDE TUBES SET | 1 | |
| MAJ-1737 | SET OF STRIGHT GUIDE TUBES FOR IV9435G. | 1 | |
| MODEL 884FY-24 | ADAPTER KIT, 856NM 1/2 PITOT-STATIC TUBE PRESSURE TEST | 1 | |
| MS-ST-500 | SWAGELOK PRE-SWAGING TOOL, 5/16" TUBE OD | 1 | |
| MS21913D6 | PLUG - FLARELESS TUBE (AS5231W06 OR SIMILAR) | 19 | |
| MT-B-3 | EXTENSION TUBE (1.5" LENGTH) | 1 | |
| MT-B-5 | EXTENSION TUBE (2.5" LENGTH) | 1 | |
| MT-D-XX | Extension Tube (dia. = 1.57) | 1 | |
| MVIQAP6145-A | MVIQ HANDSET WITH DUAL CONTROLLER USER INTERFACE 3 MVIQAP6145-A MENTOR VISUAL IQ QUICK CHANGE INTERCHANGE VIDEO PROBE ARTICULATING GUIDE TUBE | 1 | |
| MW255-01 | Moore & Wright MW255-01 External Tube Mictometer Range 0-25mm Resolution 0.01mm | 1 | |
| MW255-01DDL | Moore & Wright MW255-01DDL Digital External Tube Mictometer Range 0-25mm/0-1" Resolution 0.001mm/0.00005" | 1 | |
| OTC314299 | TUBE (3.62 OD X 3.25 ID) | 1 | |
| OTC314300 | TUBE 4.00OD X 3.75 ID | 1 | |
| P40951M-4 | Pitot tube adapter for Hawker HS125-600/700 & 800 | 1 | |
| PM70687-15 | PERSPEX TUBE 150MM DIA. 6MM WALL | 1 | |
| POLYOLEFIN RT102-3-32/SW | SHRINK TUBE 12.0-4.0X075 MM (0.472-0.157 - 0.157 X 0.0295 IN.) | 1 | |
| PS58PTP0508 | COVER: PITOT TUBE,5/8IN, | 1 | |
| PSS99451HT-3-4-4 | GULFSTREAM G5, G500 HIGH TEMP PITOT TUBE ADAPTER | 5 | |
| PWA102963 | TUBE GUIDE_330X51X25MM/.5KG_[PWA102963] | 1 | |
| PWA103684 | TURBINE EXHAUST CASE, NO.5 BEARING PRESSURE TUBE | 2 | |
| PWA107865 | TUBE-GUIDE TEC/LPT 5TH STAGE DISK | 1 | |
| PWA110092 | BORESCOPE GUIDE TUBE - COMBUSTOR, EXIT GUIDE 458MMX229MM X127MM | 4 | |
| PWA111085 | ENGINE ASSY, TEC, #5/6 BRG SCAVENGE TUBE | 1 | |
| PWA25406 | PULLER - IMC #1 BRG TRANSFER TUBE_[PWA25406] | 2 | |
| PWA27500 | PUSHER,PULLER - CSD TRANSFER TUBE_155X80X65MM/0.68KG_[PWA27500] | 4 | |
| PWC34910 | M444000( PW125 & PW127 GUIDE TUBE SET) | 2 | |
| PWC54760 | PULLER, P2.5/P3 TRANSFER TUBE | 4 | |
| PWC55694 | PW150 SERIES ENGINE GUIDE TUBE | 2 | |
| PWC56502-01 | GUIDE TUBE PWC56502-01 REV. B | 1 | |
| PWC57320 | PW150 SERIES ENGINE GUIDE TUBE | 10 | |
| PWC57533 | PW150 BOROSCOPE GUIDE TUBE | 5 | |
| PWC64731 | Collector drain .37Y5 TUBE | 1 | |
| QDS61325010 | TUBE QD2RN25 | 1 | |
| RB072610-H-A | AS350 / AS355 & EC120 SKIDTUBE ATTACHMENT | 2 | |
| RC5109 | TOOL, SCRAPER - SCAVENGE TUBE (SCRAPER TOOL)_[RC5109] | 1 | |
| RCLK5C01S020 | KIT - AXIAL SWAGE TUBE REPAIR WITH PUMP, 5000 PSI | 2 | |
| RDTA0-01-02 | TUBE DEBURR SET 0.75" | 1 | |
| RIG36092 | TUBE BENDER 5/16 8MM | 1 | |
| ROC5.5SSTUBE | 5-1/2 IN SS TUBE | 1 | |
| RTWH104Y | INT RATCH TUBE TQR ADAPT 1-5/8 | 1 | |
| RTWH40J | INT RATCH TUBE TQR ADAPT 5/8 J | 1 | |
| S216711605 | TUBE ASSY LASER MARK QD5RN1500 | 1 | |
| S3100050114 | LASER MARKED TUBE ATECH3FS250 | 1 | |
| S3200003053 | TUBE ASSY ATECH2FR125B | 1 | |
| S3200003054 | TUBE ASSY ATECH2F125RB | 1 | |
| S3200003055 | TUBE ASSY ATECH2F125OB | 1 | |
| S3200003056 | TUBE ASSY ATECH2F125GB | 1 | |
| S3200003058 | TUBE ASSY ATECH2F125BN | 1 | |
| S3200003059 | TUBE ASSY, ATECH2N125BG, SPARE | 1 | |
| S3200003060 | TUBE ASSY, ATECH2N125BO, SPARE | 1 | |
| S3200003061 | TUBE ASSY, ATECH2N125BR, SPARE | 1 | |
| S3200003062 | TUBE ASSY ATECH2F125HB | 1 | |
| S3200003063 | TUBE ASSY, ATECH2N125BH, SPARE | 1 | |
| S3200003064 | TUBE ASSY, ATECH2F125VR | 1 | |
| S3200003065 | TUBE ASSY, ATECH2F125VO | 1 | |
| S3200003066 | TUBE ASSY, ATECH2F125VG | 1 | |
| S3200003067 | TUBE ASSY, ATECH2F125VH | 1 | |
| S3200003068 | TUBE ASSY, ATECH2F125VK | 1 | |
| S3200003070 | TUBE ASSY, ATECH2F125VA, SPARE | 1 | |
| S3200003071 | TUBE ASSY, ATECH2F125BV, SPARE | 1 | |
| S3200003072 | TUBE ASSY, ATECH2N125VA, SPARE | 1 | |
| S3200003081 | TUBE ASSY, ATECH2F125VB, SPARE | 1 | |
| S3200003082 | TUBE ASSY, ATECH2N125MB, SPARE | 1 | |
| S3200003083 | TUBE ASSY, ATECH2N125VR, SPARE | 1 | |
| S3200003084 | TUBE ASSY, ATECH2N125VK, SPARE | 1 | |
| S3200003085 | TUBE ASSY, ATECH2N125VP, SPARE | 1 | |
| S3225003021 | TUBE ASSY, 250 FT LB SPARE | 1 | |
| S3225003022 | TUBE ASSY, BLK PVD ATECH3F250V | 1 | |
| S3225003023 | TUBE ASSY,BLK PVD ATECH3F250VO | 1 | |
| S3225003024 | TUBE ASSY,BLK PVD ATECH3F250VR | 1 | |
| S3225003027 | TUBE ASSY, ATECH3N250VG, SPARE | 1 | |
| S3225003028 | TUBE ASSY, ATECH3N250VO, SPARE | 1 | |
| S3225003029 | TUBE ASSY, ATECH3N250VR, SPARE | 1 | |
| S3225003031 | TUBE ASSY,CHR NM ATECH3F250BN | 1 | |
| S3225003035 | TUBE ASSY,BLK PVD ATECH3F250HV | 1 | |
| S3225003038 | TUBE ASSY, ATECH3N250VH, SPARE | 1 | |
| S3225003039 | TUBE ASSY, ATECH3N250HV, SPARE | 1 | |
| S3225003042 | TUBE ASSY, ATECH3N250BR, SPARE | 1 | |
| S3225003043 | TUBE ASSY, ATECH3N250BO, SPARE | 1 | |
| S3225003044 | TUBE ASSY, ATECH3N250BG, SPARE | 1 | |
| S3225003045 | TUBE ASSY,BLK PVD ATECH3F250VB | 1 | |
| S3225003046 | TUBE ASSMBLY ATECH3F250VT,SPAR | 1 | |
| S3225003048 | TUBE ASSMBLY ATECH3N250VB,SPAR | 1 | |
| S3225003049 | TUBE ASSY,CHR ATECH3F250RB | 1 | |
| S3225003050 | TUBE ASSY,CHR ATECH3F250OB | 1 | |
| S3225003051 | TUBE ASSY,CHR ATECH3F250GB | 1 | |
| S3230003044 | TUBE ASSY, ATECH3F125VB, SPARE | 1 | |
| S397003804 | TUBE LASER 250LB TQ ORG | 1 | |
| S397003805 | TUBE LASER 250LB TQ GRN | 1 | |
| S397003806 | TUBE LASER 250LB TQ HV | 1 | |
| S61325301 | TUBE,LASER MARK QD1RN25A | 1 | |
| S61325303 | TUBE QD2RN25A | 1 | |
| S61725001 | TUBE- LASER MARK QD1R50A | 1 | |
| S61725002 | TUBE- LASER MARK QD150A | 1 | |
| S61725007 | TUBE, LASER MARK QD1RN25B | 1 | |
| S61725008 | TUBE- LASER MARK QD2RN25B | 1 | |
| S61725031 | TUBE- LASER MARK QE1R50 | 1 | |
| S96720810 | TUBE QD2RN50A | 1 | |
| S96720813 | TUBE LASER MARKED QD3RN350A | 1 | |
| S96820201 | TUBE,LASER MARKED QC2175 | 1 | |
| S96820413 | TUBE QD3R250A | 1 | |
| S96820414 | TUBE LASER MARKED QD3R150A | 1 | |
| S96820415 | TUBE LASER MARKED QD3R2500A | 1 | |
| S96820421 | TUBE LASER MARKED QD275A | 1 | |
| S96820423 | TUBE LASER MARKED QD32500A | 1 | |
| S96820424 | TUBE LASER MARKED QD3150A | 1 | |
| S96820602 | TUBE LASER MARK QE2R250 | 1 | |
| S96820614 | TUBE LASER MARK QE3R250HV | 1 | |
| S96820615 | TUBE LASER MARK QE3R250O | 1 | |
| S96820616 | TUBE LASER MARK QE2FR75HV | 1 | |
| S96820617 | TUBE LASER MARK QE2FR75O | 1 | |
| ST2599A4712K | ST2599-47-1200 RATCHET TUBE WR | 1 | |
| ST2599C-14A | RATCH TUBE WRN CHRM 1-1/8"-350 | 1 | |
| ST2599C-3A | RATCH TUBE WRN BOEING 5/8IN | 1 | |
| ST2599C-4A | RATCH TUBE WRN 5/8" CHROME | 1 | |
| ST878D | KIT - PRESET TUBE FITTING, "SLEEVE SET", FOR PRESETTING BACS13AP FLARELESS TUBE FITTING (NOT FOR TITANIUM TUBING) (SET OF 25 EA. DIES, MANDRELS, & CLAMPS) | 8 | |
| ST879A | Kit - Preset Tube Fitting, "Sleeve Set", (Not For Titanium Tubing) (Set Of 25 Ea. Dies, Mandrels, & Clamps) | 8 | |
| ST879A-1 | KIT - PRESET TUBE FITTING, "SLEEVE SET", (NOT FOR TITANIUM TUBING) (SET OF 25 EA. DIES, MANDRELS, & CLAMPS) | 1 | |
| STD-1318 | HOSE - VACUUM, 1/4 INCH INSIDE DIAMETER (ID) PLASTIC TUBE (TYGON-B44-30PT, UNIFLEX 650SIMILAR) | 1 | |
| STD-3900 | ADAPTER STRAIGHT,TUBE MEETS AS5180D04 SPEC | 1 | |
| T-34543-16 | TUBE HANDLE FOR 40543 | 1 | |
| T-35250 | BENDER TUBE 5/16IN | 1 | |
| T-35270 | BENDER TUBE 5/8 IN | 1 | |
| T-41IS-3 | INVERTEDNUT TUBESTEEL3/16-5PCS | 1 | |
| T-41IS-4 | INVERTEDNUT TUBESTEEL 1/4-5PCS | 1 | |
| T-41IS-5 | INVERTEDNUT TUBESTEEL5/16-5PCS | 1 | |
| T-49I-5A | ELBOW90PIPETUBE5/16Tx1/8MP-2PC | 1 | |
| T-60A-2 | SLEEVE COMP TUBE 1/8 OD-15PCS | 1 | |
| T-60A-5 | SLEEVE COMP TUBE 5/16 OD-24PCS | 1 | |
| T-61A-2 | NUT TUBE COUPLING 1/8 OD-5PCS | 1 | |
| T-61A-5 | NUT TUBE COUPLING 5/16OD-12PCS | 1 | |
| T-62A-55 | NIPPLE TUBE 5/16 OD-1 PC | 1 | |
| T-69A-5A | ELBOW90PIPETUBE5/16Tx1/8MP-6PC | 1 | |
| T-69A-5B | ELBOW90PIPETUBE5/16Tx1/4MP-4PC | 1 | |
| T-E1-5A | ELBOW90PIPETUBE5/16Tx1/8MP-2PC | 1 | |
| T-E1-5B | ELBOW90PIPETUBE5/16Tx1/4MP-1PC | 1 | |
| T-N1-5-161A | NUT TUBE COUPLING 5/16 OD-6PCS | 1 | |
| T-U2-5 | NIPPLE TUBE 5/16 OD-6PCS | 1 | |
| T009753 | 3/5 FLAP TORQ TUBE MEA (SET OF 2) | 1 | |
| TM8X5-Z | HYDRAULIC TUBE M8X5 - ZINC | 1 | |
| TMH BRC21-52-02REP4 | TUBE 6.5ÕÕOD X 5ÕÕID 4140 ANN | 1 | |
| TMHBRC21-52-02REP4 | TUBE 65OD X 5ID 4140 ANN | 1 | |
| TQFR50C38 | TUBE LASER MARK TQFR50C | 1 | |
| TQSG3F250-2 | TUBE, LASER MARK, TQSG3F250 | 1 | |
| TQSG3F250DKT-2 | TUBE LASER MARK TQSG3F250DKT | 1 | |
| TQSG3F250G-2 | TUBE LASER MARK TQSG3F250G | 1 | |
| TQSG3F250HV-2 | TUBE LASER MARK TQSG3F250HV | 1 | |
| TQSG3F250MB-2 | TUBE LASER MARK TQSG3F250MB | 1 | |
| TQSG3F250O-2 | TUBE LASER MARK TQSG3F250O | 1 | |
| TQSG3FN350-2 | TUBE, LASER MARK, TQSG3FN350 | 1 | |
| TQSG3R250-2 | TUBE, LASER MARK, TQSG3R250 | 1 | |
| TT1209 | 3.75MM X 13MM TUBE TERMINAL TL | 1 | |
| TUBE3/8X.035SS304 | TUBE EN ACIER INOX 304 3/8ÕÕ O.D. X .035ÕÕ WALL | 1 | |
| TUBE5/8X16GA | TUBE ¿5/8Ó EXT X 16 Gauge x .6Ó lg | 1 | |
| TUBES GUIDE FOR CFM65-5B | TUBES GUIDE FOR CFM65-5B | 1 | |
| TUBES GUIDE FOR V2500-A5 | TUBES GUIDE FOR V2500-A5 | 1 | |
| TYTB125-15 | BAC Multi-Link Towbar, 4 in Tube Dia, 15 ft L, Aluminum, Powder-Coated, Yellow | 2 | |
| TYTB75-15 | BAC Multi-Link Towbar, 3 in Tube Dia, 15 ft L, Aluminum, Powder-Coated, Yellow | 3 | |
| USA1000J-6-5000 | VIDEOSCOPE VJ-ADV 6.9 MM (5.0 MTR TUBE) | 1 | |
| W004163A | 582 PCS CRIMP TERMINALS WIRE CONNECTORS HEAT SHRINK TUBE ELECTRICAL REPAIR KIT WITH WIRE CUTTER STRIPPER | 1 | |
| W5-00X5TB | TUBE: TIRE - W5.00X5TB, | 3 | |
| W5-30-8TB | TUBE: TIRE, USE W53066TB=3A | 1 | |
| WINS430 | TUBE INSERTION 5/16IN 4IN L | 1 | |
| WINS830 | TUBE INSERTION 5/16IN 8IN L | 1 | |
| lC6344 | TORQUE ADAPTER SET AIR TUBE COUPLING FMF LM2500 | 1 | |
| lC6952 | WRENCH, SPANNER - OIL TUBE NO.5 BRG. | 1 | |
| lC6953 | PULLER, OIL TUBE- NO 5 BRG | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
