| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| TR STAND FAS | TR STAND | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 200934-CA | STAND-PROPELLER Same as P/N ATRSH21 | 1 | |
| (CALIB) 98S53305004000 | SKIN STRINGER CALIBRATION STANDARD-9635A3 | 1 | |
| (CALIB) 98S53305005000 | SKIN STRINGER CALIBRATION STANDARD-9635A4 | 1 | |
| (CALIB) 9C6025P02 | Up-Lift Propulsor Air/Truck Shipping Stand (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FTR-7060-5 | FUEL CONTROL TEST STAND (CALIBRATION) | 1 | |
| (CALIB) PTS-2 | Precision Transfer Standard (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA211430 | STAND, TRANSPORT (CALIBRATION) (CALIBRATION) | 1 | |
| 00460-062-000 | STANDARD ADAPTER FOR TRIPOD JACK | 1 | |
| 0053-0000 | TRENT 700 STAND | 1 | |
| 01-0507-0000 | TRONAIR ATA-9 Standard Towbar Head, 20-1/2 in L, 10-5/8 in W, 4 in H, Steel, Blue | 2 | |
| 01-0515-0000 | TRONAIR ATA-9 Standard Towbar Head, 16-3/16 in L, 6-1/4 in W, 4 in H, Steel, Blue | 5 | |
| 01-0545-0011 | TRONAIR ATA-9 Standard Towbar Head, 23-3/4 in L, 29.6 in W, 4 in H, Steel, Blue | 5 | |
| 01-0546-0000 | TRONAIR ATA-9 Standard Towbar Head, 26-1/4 in L, 37-1/8 in W, Steel, Powder-Coated | 4 | |
| 01-0556-0000 | TRONAIR ATA-9 Standard Towbar Head, 27-3/4 in L, 24.8 in W, 6 in H, Steel, Blue | 2 | |
| 01-0558-0000 | TRONAIR ATA-9 Standard Towbar Head, 3.74 in L, 20.64 in W, 4.27 in H, Steel, Blue | 6 | |
| 01-0576-0000 | TRONAIR ATA-9 Standard Towbar Head, 13-5/8 in L, 6-1/4 in W, 4 in H, Steel, Blue | 6 | |
| 01-0577-0010 | TRONAIR ATA-9 Standard Towbar Head, 28-1/4 in L, 29-5/8 in W, 7-3/8 in H, Steel, Blue | 1 | |
| 01-0577-0020 | TRONAIR ATA-9 Standard Towbar Head, 28-1/4 in L, 29-5/8 in W, 7-3/8 in H, Steel, Blue | 2 | |
| 01-0590-0000 | TRONAIR ATA-9 Standard Towbar Head, 20-1/4 in L, 9.06 in W, 4 in H, Steel, Blue | 9 | |
| 01-0599-0010 | TRONAIR ATA-9 Standard Towbar Head, 31 in L, 31 in W, 4 in H, Steel, Powder-Coated | 2 | |
| 01-0601-0000 | TRONAIR ATA-9 Standard Towbar Head, 23-1/4 in L, 6-1/4 in W, 4 in H, Steel, Blue | 3 | |
| 01-0602-0000 | TRONAIR ATA-9 Standard Towbar Head, 24-15/16 in L, 8-7/8 in W, 4-5/8 in H, Steel, Blue | 3 | |
| 01-0605-0000 | TRONAIR ATA-9 Standard Towbar Head, 27-1/16 in L, 31-1/2 in W, 6-1/16 in H, Steel | 4 | |
| 01-0612-0000 | TRONAIR ATA-9 Standard Towbar Head, 23-1/2 in L, 8 in W, 4-1/2 in H, Steel, Blue | 3 | |
| 01-1201-0010 | TRONAIR ATA-9 Standard Multi-Head Towbar, 4 in Tube Dia, 127 in L, 22 in W, 7-3/4 in H | 14 | |
| 01-1202-0000 | TRONAIR ATA-9 Standard Multi-Head Towbar, 3-1/2 in Tube Dia, 127 in L, 22 in W, Blue | 13 | |
| 012568 | C-130 WING AND HORIZONTAL STAB “TRIPOD” STYLE SUPPORT STANDS | 1 | |
| 01A1201-0010 | TRONAIR ATA-9 Standard Multi-Head Towbar, 4 in Tube Dia, 127 in L, 22 in W, 7-3/4 in H | 2 | |
| 02-441FBACR15FT | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) | 1 | |
| 02-441FBACR15FT-1 | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") | 1 | |
| 02-441SBACR15FT | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") | 1 | |
| 02-441SBACR15FT-1 | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") | 1 | |
| 02A7845C0120 | TRONAIR TRIPOD JACK STANDS | 8 | |
| 03-5802-0000 | Tronair 03-5802-0000 Tail Stand | 4 | |
| 03-5804-0010 | TRONAIR Stabilizer Jack Stand | 3 | |
| 03-5809-0000 | Stand Tail Tronair | 4 | |
| 03-5815C0000 | TAIL STAND: TRIPOD,CE, CITATION JET | 1 | |
| 03-5851-0000 | TAILSTAND: TRIPOD JACK, HONDAJET | 1 | |
| 03-8016-0010 | TAIL STAND (TRONAIR) | 1 | |
| 03A5800C0010 | TAILSTAND: TRIPOD JACK,W/ALARM, THIS PRODUCT CAN ONLY BE SHIPPED VIA LTL CARRIERS, FREIGHT METHODS WILL BE RESTRICTED. | 4 | |
| 03A5802C0000 | TRONAIR Stabilizer Jack Stand, 39 in Closed Height x, 67 in Extended Height | 5 | |
| 03A5804C0010 | TRONAIR Stabilizing Stand, 43 in H Closed, 66 in H Extended, For Hawker Beechcraft King Air | 6 | |
| 03A5809C0000 | TAILSTAND: TRIPOD JACK,W/ALARM, | 5 | |
| 03A5822C0000 | TAIL STAND: TRIPOD JACK, STOCKED AT 1041 | 4 | |
| 03A5829C0000 | TAIL STAND: TRIPOD,JACK | 5 | |
| 03A5840C0000 | Tronair 03A5840C0000 Dassault Falcon 7X Stabilizing Stand with Alarm (CE) | 2 | |
| 03A5845C0000 | TRONAIR TAILSTAND W/ALARM LEGACY 500 | 2 | |
| 04-531 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) | 1 | |
| 04-532 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) (Holding capacity: 620 lbs) (Jaw gap: 0 - 1-1/2" (38 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Sta | 1 | |
| 04-533 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) (Holding capacity: 620 lbs) (Jaw gap: 0 - 1-1/2" (38 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Sta | 1 | |
| 04-543 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) (Holding capacity: 620 lbs) (Jaw gap: 0 - 1-1/2" (38 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Sta | 1 | |
| 04-544 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) (Holding capacity: 620 lbs) (Jaw gap: 0 - 1-1/2" (38 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Sta | 1 | |
| 04-545 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) (Holding capacity: 620 lbs) (Jaw gap: 0 - 1-1/2" (38 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Sta | 1 | |
| 044 A3 | CENTRIFUGE TUPE STAND | 1 | |
| 044 A3:D19C004 | CENTRIFUGE TUPE STAND | 1 | |
| 044C004 | CENTRIFUGE TUBE STAND | 1 | |
| 04Y 0005-001 | PARKING TRANSPORTATION STAND/TROLLEY | 2 | |
| 04Y 0005−001 | PARKING TRANSPORTATION STAND/TROLLEY | 2 | |
| 04Y0004-001 | TRANSPORTATION STAND, TRU | 1 | |
| 04Y0005-001 | PARKING TRANSPORTATION STAND/TROLLEY | 2 | |
| 08-2001-0000 | ENGINE STAND TFE73 (TEXTRON WC) | 5 | |
| 08-2014-0000 | ENGINE TRANSPORT STAND | 9 | |
| 08-2016-0000 | DHC-8 PROP TRANSPORT/BUILD UP STAND WITH PROP HUB ADAPTOR | 8 | |
| 08-2029-0000 | ENGINE STAND (TRON AIR) | 5 | |
| 1/N-02-384 | Nomad Series N22 & N24 Reference Standard. for the inspection of Wing Strut Upper Fittings, Figure 27 Page 51. Includes Test Report and Certificate of Conformance. | 1 | |
| 10,005,092 | TRANSFER STAND 300MM 519-109-10 | 1 | |
| 10059-501 | STAND - ENGINE TRANSPORT | 1 | |
| 101-04230 | MASTER COMPASS COMPLETE WITH TRIPOD STAND | 1 | |
| 101198-100 | TEST STAND, AIRCRAFT HYDRAULIC SYSTEM ELECTRIC MOTOR DRIVEN | 1 | |
| 104307 | OH KIT FOR HAND PUMPS FOR A320 ENGINE TRANSPORT STAND | 1 | |
| 106ETMAMY | Set, Socket Driver, Metric, Hex, Standard, 2 to 6 mm (6 pcs.) | 1 | |
| 10RS.55-1 | BOEING KC10 ET REFERENCE STANDARD. INCLUDES: -3 SKIN, -53 TEAR STRAP, -63 SHEAR CLIP. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 10RS.55-3 | BOEING KC10 ET REFERENCE STANDARD. INCLUDES: -3 SKIN, -53 TEAR STRAP, -163 SHEAR CLIP. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 10RS.55-5 | BOEING KC10 ET REFERENCE STANDARD. INCLUDES: -3 SKIN, -53 TEAR STRAP, -363 SHEAR CLIP. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 10RS.55-7 | BOEING KC10 ET REFERENCE STANDARD. INCLUDES: -103 SKIN, -53 TEAR STRAP, -563 SHEAR CLIP. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 110059-501 | STAND-ENGINE TRANSPORT | 3 | |
| 110350 | STAND ENGINE TRANSPORT | 1 | |
| 110350-501 | STAND ENGINE TRANSPORT | 2 | |
| 110701-1 | STAND ENG TRAN/ INST | 4 | |
| 111502-1 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (STANLEY) | 1 | |
| 111515-1 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (STANLEY) | 1 | |
| 1123000-550 | STRETCHER - STANDARD 787 MODEL | 1 | |
| 114701-1 | COM-6277 STAND - TRANSPORTATION, ENGINE, CFM56-7 114701-1, SUPPLIER: 9M323 | 2 | |
| 114702-1 | STAND - TRANSPORTATION, ENGINE, CFM56-7 | 2 | |
| 1151952-19 | CONTROL-STANDBY POWER | 1 | |
| 115950000-1 DOL | ENGINE TRANSIT STAND | 1 | |
| 115950000-1DOL3 | ENGINE TRANSIT STAND | 1 | |
| 1159P41460-01-02 DOL | TRANSPORTATION STAND | 1 | |
| 1159P41460-1-2 DOL | TRANSPORTATION STAND | 1 | |
| 1159SST05 | ULTRASONIC REFERENCE STANDARD | 1 | |
| 116-1 | HYDRAULIC TEST STAND, ELECTRIC MOTOR DRIVEN | 1 | |
| 11C3186 | STAND-HP COMPR RTR VERT (DOLLY) | 1 | |
| 11C3506 | STAND - BUILD UP/TRANSPORT/STORAGE-LPT MODULE | 1 | |
| 11C3516 | BRACKET SET - ROLL-OVER STAND - TRF (BRACKET SET) | 1 | |
| 12-21476 | MEYER UNIVERSAL JACK SET WITH TRAIL STAND | 1 | |
| 121G830077-001 | TAIL ROTOR TRANSMISSION ASSEMBLY STAND PLATE | 1 | |
| 12245-004-001 | ULTRASONIC CALIBRATION STANDARD, MIDSPAR | 1 | |
| 12245-011-001 | ULTRASONIC CALIB.STANDARD LEAR 45 NTM 57-30-05 | 1 | |
| 12245-062-001 | ULTRASONIC REFERENCE STANDARD, AILERON DRIVE SUPPO | 1 | |
| 12245-062-005 | ULTRASONIC REFERENCE STANDARD | 1 | |
| 1230.4 | ELECTRONIC SOLDERING IRON + STAND RANGE FROM 25W-40W | 1 | |
| 1230B.25 | ELECTRONIC SOLDERING IRON + STAND RANGE FROM 25W-40W | 1 | |
| 12445-002-004 | TOOL-ULTRASONIC CALIBRATION STANDARD | 1 | |
| 129254 | PROBE, TRANSVERSE, STANDARD, RIGID GLASS EPOXY STEM | 1 | |
| 1256728 | CONTROLL BOX ,HYDRAULIC SYSTEM COMPONENTS TEST STAND | 1 | |
| 12S1283-02 | DOCTO® ADJUSTABLE DEPTH CONTROL SAWS STANDARD MODE | 2 | |
| 13-03652 | Bowers 13-03652 Electronic Stand for Digitel Force Gauge | 1 | |
| 13-3022 | Bowers 13-3022 Standard Tracer SH Smallest Bore Dia 8mm Max. Measuring Depth 27mm Included in the Delivery | 1 | |
| 13-3030 | Bowers 13-3030 Standard Tracer Extension 100mm | 1 | |
| 13-6603-6000 | TRONAIR 13-6603-6000 TRONAIR 13-6603-6000 GROUND HYD. POWER STAND | 4 | |
| 131681AJ14-9 | WIRE,ELECTRICAL, STANDARD 14 AWG WIRE | 1 | |
| 140159-5 | STAND-ENGINE TRANSPORT | 1 | |
| 14701-1 | STAND, TRANSPORTATION | 1 | |
| 15-5 PH | CALIBRATION REFERENCE STANDARD, 15-5 PH STAINLESS STEEL, CONTAINING 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES, (MHIRJ OR EQUIVALENT) | 1 | |
| 150-830 | TRAVEL COVER, Light Weight Travel Canopy/Engine Cover (standard canopy cover type) | 1 | |
| 15F2697 | ENTRY DOOR STAND | 1 | |
| 15−5 PH | Calibration reference standard 15−5 PH stainless steel containing 0.008 in. (0.20 mm)0.020 in. (0.51 mm) and 0.040 in. (1.02 mm) deep electrical discharge machined notches (Bombardier Inc. or equivalent) | 1 | |
| 16A12036-1 | STAND CANOPY/TRANSPORT | 1 | |
| 171T17969-401 | CALIBRATION STANDARD - CALIBRATE EDY CURRENT INSTR | 3 | |
| 171T17973-401 | CALIBRATION STANDARD - CALIBRATE EDY CURRENT INSTR | 4 | |
| 17P9M2007 | Douglas Reference Standard Assembly For the Ultrasonic Calibration of Upper Wing Skin to common Stringer, Figure24-4 sheets 253. Material: 7075 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 180059-4 | AIR/TRUCK STAND PW4098_[180059-4] | 1 | |
| 1837A | ALUMINUM CENTRIFUGE STAND. | 3 | |
| 188A | PROTRUDING-HEAD FASTENER REFERENCE STANDARD | 5 | |
| 190100 | ROLLOVER STAND FOR TRENT 800 | 1 | |
| 190100-3 | Trent 800 Air & Truck Shipping Stand | 1 | |
| 198055 | PATRON STANDARS CON DEFECTOS | 1 | |
| 1AE5R18762 | STAND, TRANSPORT | 1 | |
| 1AE5R18762 REV NC | STAND, TRANSPORT | 1 | |
| 1C5830 | STAND, R/W&STORE-LTR VERT | 1 | |
| 1C6345 | CLEARANCE GAGE - TRAN(STANDARD) | 1 | |
| 1C6839 | BRACKET TRF TO SUB - ASSEMBLY STAND | 1 | |
| 1C6840 | STAND, SUB-ASSEMBLY - TRF | 1 | |
| 1J12019 | STAND, TRANSPORT | 1 | |
| 1J12410 | STAND, TRANSPORT | 1 | |
| 1R19463 | Surgical Strike Stand | 1 | |
| 1TD1133D07001-2001 | Seyer Industries reference standard. Material: 2024-T351 Aluminum...Chamfer EDM Notch Size: .030" x .030" x .005" +/- .002"...Bore EDM Notch Size: .030" x .030" x .005" +/- .002". Includes Test Report and Certificate of Conformance. Part Serial Number:... | 1 | |
| 2-1522 | Pin Protrusion Gauges (Type: Hi-Lok Standard) (Add to cart: Add To Cart) | 2 | |
| 2-1522-B | Pin Protrusion Gauges (Type: Hi-Lok Standard) (Add to cart: Add To Cart) (Type: Hi-Lok Aerospace 'B') (Add to cart: Add To Cart) | 1 | |
| 2-1522-B-2 | Pin Protrusion Gauges (Type: Hi-Lok Standard) (Add to cart: Add To Cart) (Type: Hi-Lok Aerospace 'B') (Add to cart: Add To Cart) (Type: Hi-Lok Large Diameter) (Add to cart: Contact us to order) | 1 | |
| 2-1522HLM | Pin Protrusion Gauges (Type: Hi-Lok Standard) (Add to cart: Add To Cart) (Type: Hi-Lok Aerospace 'B') (Add to cart: Add To Cart) (Type: Hi-Lok Large Diameter) (Add to cart: Contact us to order) (Type: Hi-Lok/Hi-Tigue Metric) (Add to cart: Add To Cart) | 1 | |
| 2-1522HST | Pin Protrusion Gauges (Type: Hi-Lok Standard) (Add to cart: Add To Cart) (Type: Hi-Lok Aerospace 'B') (Add to cart: Add To Cart) (Type: Hi-Lok Large Diameter) (Add to cart: Contact us to order) (Type: Hi-Lok/Hi-Tigue Metric) (Add to cart: Add To Cart) (Ty | 1 | |
| 2-1522HST-2 | Pin Protrusion Gauges (Type: Hi-Lok Standard) (Add to cart: Add To Cart) (Type: Hi-Lok Aerospace 'B') (Add to cart: Add To Cart) (Type: Hi-Lok Large Diameter) (Add to cart: Contact us to order) (Type: Hi-Lok/Hi-Tigue Metric) (Add to cart: Add To Cart) (Ty | 1 | |
| 2-1522HST-B | Pin Protrusion Gauges (Type: Hi-Lok Standard) (Add to cart: Add To Cart) (Type: Hi-Lok Aerospace 'B') (Add to cart: Add To Cart) (Type: Hi-Lok Large Diameter) (Add to cart: Contact us to order) (Type: Hi-Lok/Hi-Tigue Metric) (Add to cart: Add To Cart) (Ty | 1 | |
| 2-1522HSTM | Pin Protrusion Gauges (Type: Hi-Lok Standard) (Add to cart: Add To Cart) (Type: Hi-Lok Aerospace 'B') (Add to cart: Add To Cart) (Type: Hi-Lok Large Diameter) (Add to cart: Contact us to order) (Type: Hi-Lok/Hi-Tigue Metric) (Add to cart: Add To Cart) (Ty | 1 | |
| 20-19-2623-100 | STAND ENGINE TRAININ | 1 | |
| 2000468 | G200 towbar head for Gulfstream G150/G200/G250/G280/Galaxy/Dornier 328/Envoy 3. 60" aluminum extension tube with head attachment. Extension allows sufficient clearance under nose of aircraft to use with standard length towbar, eliminating the need for a | 1 | |
| 2002441 | LC100E Galvanized Low Profile Lav Cart. Includes all hoses & couplers required to service aircraft. 68-gallon waste, 36-gallon fill. 12-volt electric pump kit (4.5gpm @ 40psi) with onboard charging system, backup hand pump, flow meter included as standar | 1 | |
| 200934-CA | STAND-PROPELLER ATR | 2 | |
| 200934CA | STAND-PROPELLER ATR | 2 | |
| 20131 | ENTRY STAND | 2 | |
| 2000194 | G200S "Short" towbar head for Gulfstream G150/G200/G250/G280/Galaxy/Dornier 328/Envoy 3. Nose gear attachment is mounted to a standard -2R shank with radial/linear shear protection incorporated. Compatible towbar(s): TB1, TB2.5, TB3 (w/Reducer), TB125 (w | 1 | |
| 2000412 | ATR42/72 towbar head for all ATR42/72 aircraft. Designed with w/radial & linear shear protection to protect nose gear. TB3 shank is standard. Compatible towbar(s): TB3, TB125. | 1 | |
| 2001182 | Specialties low-level twin folding maintenance stand provides safe and easy transport access for aircraft maintenance and rolling stock inspection. Featuring an incredibly versatile folding design, the locking top portion of the stand can be folded up, ac | 1 | |
| 2010789 | Fueling Stand: Towable mobile platform services A318-21, ATR 42/72, BAE ATP/146/RJ190 and others. Dual servicing platform heights of 50" and 70" (inches). *Fuel Lift Assemblies Not Included | 1 | |
| 2010790 | AERO Fueling Stand: Towable mobile platform services A300, A310, B757-200/300, B767-200/200ER/300/300ER/400ER, L1011 TRI-STAR, DC-10, MD-11. Platform Heights of 92" and 112". *Fuel Lift Assemblies Not Included | 1 | |
| 12298097 | STAND ENG. / TRANS. | 1 | |
| 201198-00 | HYDRAULIC TEST STAND ELECTRIC | 1 | |
| 2017837 | NB & WB Adjustable Fuel Stand. Provides a working height range of 112" to 209". Sturdy structural steel construction is powder coated for durability. Full bumpers on platform railings protect underwing of aircraft. High quality hydraulic lift allows easy | 1 | |
| 2020965 | Portapump 3 Metre (10ft) inlet / outlet hoses bundle. Include: Hose bag, carton, inlet stand pipe and outlet nozzle with valve. | 1 | |
| 2020966 | Portapump 5 Metre (16.4ft) inlet / outlet hoses bundle. Include: Hose bag, carton, inlet stand pipe and outlet nozzle with valve. | 1 | |
| 2050S-19 | MITUTOYO DIAL INDICATOR 20*0.01MM METRICS STANDARD | 1 | |
| 208 FRONT SPAR | CESSNA / TEXTRON AVIATION EDDY CURRENT REFERENCE STANDARD 208 FRONT SPAR LOWER CAP. Drawing NO. 2683201 | 1 | |
| 208 REAR SPAR | CESSNA / TEXTRON AVIATION EDDY CURRENT REFERENCE STANDARD 208 REAR SPAR LOWER CAP. Drawing NO. 2683202 | 1 | |
| 208EFTABMY | Set, Socket Driver, Metric, Ball Hex, Standard, 1/4"-3/8" Drive, 3 to 10mm (8 pcs.) | 1 | |
| 210EFTAMY | DRIVE METRIC STANDARD HEX BIT SOCKET SET | 1 | |
| 211EFAMY | Set, Socket Driver, Metric, Hex, Standard, 4 to 14 mm (11 pcs.) | 1 | |
| 21C2780G001 | TEST STAND,ELECTRIC AND HYDRAULIC SYSTEM COMPONENTS | 1 | |
| 21C7082G02 | ADAPTER TRANSPORT (ENGINE STAND) | 3 | |
| 21C7726G01 | INLET SCREEN, TEST STAND, SMALL TRAILER | 1 | |
| 2285/90.02 | 2285/90.02;Standard Stereo Headset with Volume Control | 1 | |
| 23 | Tesa 03210904 GT 21 / Standard probes, ± 1 mm, 4,3 mm travel (GT21) | 1 | |
| 27004 | HYDRAULIC TEST STAND (ELECTRIC) | 1 | |
| 23054395 | TRANSPORT STAND | 2 | |
| 27-1-4282 | STAND, QECU TRANSPORTATION | 1 | |
| 27-1-5333 | STAND, PROPELLER TRANSPORT | 1 | |
| 27-95031-001 | Fairchild METRO 23, Model SA227-CC, METRO 23, Model SA227-DC,Reference standard for inspection of the MLG and NLG Yoke Assembly. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 27400001-001 | CONTROL SURFACE BALANCE STANDS | 1 | |
| 289542-1 | ADAPTER TEST STAND FUEL CONTROL | 1 | |
| 294889-1 | FUEL CONTROL TEST STAND ADAPTER | 1 | |
| 2C14048G03 | STAND, REWORK AND STORAGE, HPTR | 3 | |
| 2C14222 | STAND,INSTL/RMV-HP TRBRTR SHFT SLS;G01 | 1 | |
| 2C14222 REV D | STAND, INSTALL/REMOVE-HP TURB RTR SHAFT SEALS & BRG RACE | 1 | |
| 2C14222G01 | STAND, INSTALL/REMOVE-HP TURB RTR | 4 | |
| 2C14653G01 | BRACKET, TRF TO ASSEMBLY STAND | 1 | |
| 2C6061 | STAND, REWORK & STORAGE HIGH PRESSURE TURBINE ROTR | 1 | |
| 2C6217F2 | TRF FIXTURE & STAND | 1 | |
| 2C6223G01TK | BRACKET SET, TRF TO SUBASSY. STAND | 1 | |
| 2C81004G01 | STAND, ENGINE TRANSPORT AND MAINTENANCE | 1 | |
| 2C81004G02 | STAND, ENGINE TRANSPORT | 1 | |
| 2C81005G01 | TRUNNION, ENGINE TRANSPORTATION STAND | 1 | |
| 2C81033G01 | STAND, TRANSPORT - ENGINE / FULL EBU | 3 | |
| 2C91056 | TRANSPORT STAND | 1 | |
| 2C91353 | TRANSPORT STAND | 1 | |
| 2KEX-120 | INTAKE/EXHAUST COVERS, Standard Design Strap Type (set of 4) | 1 | |
| 30-820-2460 | Sylvac Support Stand for Protractor | 1 | |
| 3008-550 | TOOL - SCREW REMOVAL (ALSO CALLED A "LESTER" TOOL) (USE WITH STANDARD 1/4" HEXAGON SCREW DRIVER BITS) (MAGNAVON INDUSTRIES INC) | 2 | |
| 307ESAMY | SOCKET DRIVER SET, METRIC, HEX, STANDARD, 6 TO 19 MM, 7 PCS, MAKE: SNAP ON | 1 | |
| 310089 | Lift Up Stand Kit for MDC Controller | 1 | |
| 310203 | Vertical Stand for ECD & ECTD Controller | 1 | |
| 3170014-1 | NOSE GEAR STRUT STAND | 1 | |
| 32-0492-002 | Standard, Cylinder, Landing Gear, B757/767, .375" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 32-0492-004 | Standard, Cylinder, Landing Gear, B757/767, .400" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 32-0492-006 | Standard, Cylinder, Landing Gear, B757/767, .425" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 32-0492-008 | Standard, Cylinder, Landing Gear, B757/767, .450" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 32-0492-010 | Standard, Cylinder, Landing Gear, B757/767, .475" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 32-0492-012 | Standard, Cylinder, Landing Gear, B757/767, .500" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 3223-01 | ENGINE TRANSPORT STAND | 1 | |
| 3225A | ENGINE STAND TRANSPORTATION CFM56-5C4 / BOOTSTRAP KIT | 1 | |
| 3225C-01 | ENGINE STAND TRANSPORTATION CFM56-5C4 / BOOTSTRAP KIT | 1 | |
| 33-725 | 25' POWERLOCK TAPE MEASURE WITH BOTH STANDARD AND METRIC MARKINGS. | 1 | |
| 34033340 | TAPE TRANSPORT STAND | 1 | |
| 342100-1 | STAND,TRANSPORT-POWER PLANT (SPLIT SHIP) | 1 | |
| 3464 | TRANSPORT STAND BASE | 1 | |
| 3464A-01 | ENGINE STAND TRANSPORTATION CFM56-5C4 / BOOTSTRAP KIT | 1 | |
| 3464B-01 | ENGINE STAND TRANSPORTATION CFM56-5C4 / BOOTSTRAP KIT | 1 | |
| 35-92133-0001 | ENGINE AND STRUCTURE STANDARD TOOL KIT | 1 | |
| 350A91-3381-00 | TRH SUPPORT STAND | 1 | |
| 350A91-3381-00/PHP | TRH SUPPORT STAND | 1 | |
| 3600-25 | ULTRA LIGHT AIR HOSE ( INNER DIAMETER: 1/4" )( MAXIMUM WORKING PRESSURE: 300 PSI )( OUTER DIAMETER: .472" )( OVERALL LENGTH: 25' (7.6 M) )( TYPE: STANDARD HOSE ) | 1 | |
| 3600-50 | ULTRA LIGHT AIR HOSE ( INNER DIAMETER: 1/4" )( MAXIMUM WORKING PRESSURE: 300 PSI )( OUTER DIAMETER: .472" )( OVERALL LENGTH: 50' (15.2 M) )( TYPE: STANDARD HOSE ) | 1 | |
| 37-11 | USATCO Rivet Squeezer Floor Stands (Includes: Stand & Foot Control) (Height: 45" (114 cm)) (Add to cart: Add To Cart) | 1 | |
| 37-12 | USATCO Rivet Squeezer Floor Stands (Includes: Stand & Foot Control) (Height: 45" (114 cm)) (Add to cart: Add To Cart) (Includes: Stand, Foot Control & Conversion Head) (Height: 40" (102 cm)) (Add to cart: Add To Cart) | 1 | |
| 37-13 | USATCO Rivet Squeezer Floor Stands (Includes: Stand & Foot Control) (Height: 45" (114 cm)) (Add to cart: Add To Cart) (Includes: Stand, Foot Control & Conversion Head) (Height: 40" (102 cm)) (Add to cart: Add To Cart) (Includes: Bench Mount, Foot Control | 1 | |
| 37-18 | USATCO Rivet Squeezer Stand For Ultralite® Riveters (Includes: Floor Stand & Hands Free Foot Control-Height 40") (Add to cart: Add To Cart) | 3 | |
| 37-20 | USATCO Rivet Squeezer Stand For Ultralite® Riveters (Includes: Floor Stand & Hands Free Foot Control-Height 40") (Add to cart: Add To Cart) (Includes: Hands Free Foot Control Only (portable)) (Add to cart: Add To Cart) | 1 | |
| 37-70127 | USATCO DUAL HEAD SHRINKER & STRETCHER STAND | 1 | |
| 39DLP | "DIGITAL ULTRASONIC THICKNESS GAGE WITH WAVEFORM VERIFICATION AND INTERNAL DATALOGGER. STANDARD KIT INCLUDES: CARRYING CASE, USB MANUAL, GAGEVIEW INTERFACE PROGRAM, USB CABLE, LITHIUMION RECHARGEABLE BATTERY " | 1 | |
| 3G6200G00131 | STAND MR AND TR BLADES STORAGE | 1 | |
| 3G6205G11532 | TRANSPORTABLE STAND, SWASHPLATE SUPPORT | 1 | |
| 3G7105G00132 | ENGINE TRANSPORT STAND | 1 | |
| 4-125STD | GROUND POWER UNIT - STANDARD, ELECTRICAL - 125 KVA, 400 HZ - DIESEL POWERED - NBPT MODULE AVAILABLE | 1 | |
| 4-90STD | GROUND POWER UNIT - STANDARD - ELECTRICAL - 90 KVA, 400 HZ - DIESEL POWERED - NBPT MODULE AVAILABLE | 1 | |
| 402027 | CUBO ESTANDAR DE 15/16-IN CON ENTRADA DE 3/8 | 1 | |
| 412B5MHZ35R80FE | CUSTOM 5MHz 35° TRANSVERSE WAVE TRANSDUCER WITH END MOUNT MICRODOT CONNECTOR WIT A 80mm RADIUS. USED WITH AIRBUS REFERENCE STANDARD PART NUMBER 98A54003096 Includes Test Report and Certificate of Conformance. REFERENCE: AIRBUS A300-600 PART 4 54-50-20 | 1 | |
| 412B5MHZ40R75FE | CUSTOM 5MHz 40° TRANSVERSE WAVE TRANSDUCER WITH END MOUNT MICRODOT CONNECTOR WIT A 75mm RADIUS. USED WITH AIRBUS REFERENCE STANDARD PART NUMBER 98A54003069 Includes Test Report and Certificate of Conformance. REFERENCE: AIRBUS A300-600 PART 4 54-50-20 | 1 | |
| 412E5MHZ60FE | CUSTOM 5MHz 60° IN FE TRANSVERSE WAVE BACKSHOOTING TRANSDUCER WITH A SIDE MOUNTED MICRODOT CONNECTOR. CASE SIZE: .690" x .354" x .354 Includes Test Report and Certificate of Conformance. REFERENCE STANDARD: 98A54003077 | 1 | |
| 42277-808 | ASSY TRANS STAND, AI | 1 | |
| 4340-5-0050 | STANDARD REFERENCE BLOCKS FOR ULTRASONICS – DISTANCE AMPLITUDE, 5/64" FLAT-BOTTOM HOLES, 4340 STEEL, IN ACCORDANCE WITH ASTM E127 | 1 | |
| 4340-5-0100 | STANDARD REFERENCE BLOCKS FOR ULTRASONICS – DISTANCE AMPLITUDE, 5/64" FLAT-BOTTOM HOLES, 4340 STEEL, IN ACCORDANCE WITH ASTM E127 | 1 | |
| 4340-5-0175 | STANDARD REFERENCE BLOCKS FOR ULTRASONICS – DISTANCE AMPLITUDE, 5/64" FLAT-BOTTOM HOLES, 4340 STEEL, IN ACCORDANCE WITH ASTM E127 | 1 | |
| 4400-0001-000 | STAND - ALL PURPOSE (APS) ENGINE TRANSPORTATION, ROAD & AIR FREIGHT | 1 | |
| 4402-0001-000 | BASIC TRANSPORTATION STAND | 1 | |
| 4408-0001-000 | ENGINE STAND TRENT 7000 | 1 | |
| 4408-3001-000 | STAND TRENT ALL PURPOSE | 1 | |
| 45-403 | Ringer Cable Stripper Standard No Blade | 5 | |
| 45808 | CUBO ESTANDAR DE 5/16-IN CON ENTRADA DE 1/4-IN 12PT | 1 | |
| 45809 | CUBO ESTANDAR DE 11/32 CON ENTRADA DE ¼ | 1 | |
| 478554 | Henkel 984261 LOCTITE Standard Cartridge to Nozzle Adapter for 300 mL Cartridges | 1 | |
| 4920-15-1989841 | HYDRAULIC TEST STAND, ELECTRIC MOTOR DRIVEN | 1 | |
| 4920-99-212-4485 | TRANSPORTATION STAND | 1 | |
| 506 | REERENCE STANDARD FOR B757 TRAILING EDGE | 4 | |
| 51-60-00-AL2024-.040 | Airbus Standard, A330 PT6 53-21-36:PG637 FIG620, ATR72 PT6 51-60-00 PG 631 FG 617, .040 2024-T3 | 1 | |
| 51-60-00-AL2024-.063 | Airbus Standard, A330 PT6 53-21-36:PG637 FIG620, ATR72 PT6 51-60-00 PG 631 FG 617, .063 2024-T3 | 1 | |
| 51-60-00-AL2024-.083 | Airbus Standard, A330 PT6 53-21-36:PG637 FIG620, ATR72 PT6 51-60-00 PG 631 FG 617, .083 2024-T3 | 1 | |
| 51-60-00-AL2024-.120 | Airbus Standard, A330 PT6 53-21-36:PG637 FIG620, ATR72 PT6 51-60-00 PG 631 FG 617, .120 2024-T3 | 1 | |
| 51-60-00-AL2024-.160 | Airbus Standard, A330 PT6 53-21-36:PG637 FIG620, ATR72 PT6 51-60-00 PG 631 FG 617, .160 2024-T3 | 1 | |
| 51-60-00-AL2024-.200 | Airbus Standard, A330 PT6 53-21-36:PG637 FIG620, ATR72 PT6 51-60-00 PG 631 FG 617, .200 2024-T3 | 1 | |
| 5163A42 | WRENCH:COMBINATION STANDARD SET IN METRIC TOOLS - HAND / POWER :10 PIECE INCH WRENCH SET 1/4" - 3/4" ORDER PN 5163A43 FROM MCMASTER- CARR MANUFACTURER PART NUMBER (M) - 5163A42; MANUFACTURER (MA) - ARMSTRONG; VENDOR/SUPPLIER PART NUMBER (VN) - 5163A42 | 1 | |
| 519-109-10 | Mitutoyo 519-109-10 Transfer Stand | 1 | |
| 53-20-165/2 | RADIUSED ULTRASONIC PROBE SHOE USED WITH K5K AND REFERENCE STANDARD 53-20-165/1 (BAe 146 Series) | 1 | |
| 53-20-171/2 | RADIUSED ULTRASONIC PROBE SHOE USED WITH K5K(AFC-525-7S) AND REFERENCE STANDARD 53-20-165/1 (BAe 146 Series). Includes Certificate of Conformance. | 1 | |
| 531195T01R00 | TOOLKIT STANDARD-STRUCTURAL REPAIR | 1 | |
| 55-1987 | Ergo-Elite Stripmaster Standard, 16-26 AWG. | 3 | |
| 55-36-01 | UT CALIBRATION REFERENCE STANDARD , STEP WEDGE, 7000 SERIES ALUMINUM, GENERIC AS PER ATR 72 NTM 55-36-01 | 1 | |
| 57-12-501 | RIGHT AND LEFT WING REAR BEAM AT BL 35.8 — EDDY CURRENT INSPECTION CALIBRATION STANDARD, 1159W40007-1NDT (GULFSTREAM) | 1 | |
| 57-12-502 | RIGHT AND LEFT WING REAR BEAM AT RBS 103.3 — EDDY CURRENT INSPECTION PROBE :SPO 5053 PROBE :SPO 5054 CALIBRATION STANDARD, 1159W40005-1NDT (GULFSTREAM | 1 | |
| 57-12-504 | RIGHT AND LEFT WING REAR BEAM AT RBS 230.1 — EDDY CURRENT INSPECTION CALIBRATION STANDARD, 1159W40063-1NDT (GULFSTREAM | 1 | |
| 57-54-103C-POS | CUSTOM TRANSDUCER POSITIONER FOR 57-54-103C REFERENCE STANDARD | 1 | |
| 574121-11 | STAND (TO HOLD ECCENTRIC SETTING DURING ASSEMBLY | 1 | |
| 576714 | STANDARD STRAIGHT ACTION HAND CRIMP TOOL | 4 | |
| 57949A0000-01 | STAND, NLG MAINTENANCE/TRANSPORTATION | 2 | |
| 5826522 | APU TRANSPORTATION STAND 131-9A APU | 1 | |
| 5826619 | TRANSPORT STAND FOR APU 331-500 | 1 | |
| 5826622 | APU TRANSPORTATION STAND + BOX | 1 | |
| 5837818-2 | ENGINE TRANSPORT STAND | 2 | |
| 5837818-3 | STAND TROLLEY,EN-GINE | 1 | |
| 5837818-3 | STAND TROLLEY,ENGINE | 1 | |
| 5838217-1 | TRANSPORT/SHIPPING STAND | 2 | |
| 5838217−1 | TRANSPORT/SHIPPING STAND | 2 | |
| 61-0072-01 | Q400 PROP ASSEMBLY TRUCK TRANSPORT STAND | 1 | |
| 63819-6800 | Hand Crimp Tool for Industry standard 1.78mm Terminals | 1 | |
| 63819-6900 | Hand Crimp Tool for Industry standard 1.78mm Tab Terminals, 24-26 AWG Wire | 1 | |
| 64ME65B00713 | SHIPPING FXTR, ENG STAND JT9D & ACC | 1 | |
| 6583102-1 | BLOQUE PATRON CESSNA REFERENCE STANDARD | 1 | |
| 700 | TRENT 700 ENGINE STAND | 1 | |
| 7300 | DINITROL ACS, STANDARD KIT | 1 | |
| 6791045 | STAND - TURB ROTOR TRANS & TURNOVER | 1 | |
| 6796003 | STAND - TRANSPORTATION & STORAGE, REDUCTION GEAR ASSY | 2 | |
| 6796129 | STAND,COMPRESSOR ROTOR TRANSPORTATION | 3 | |
| 6796177 | STAND - ENGINE TRANSPORTATION | 1 | |
| 6796539 | Stand â Transportation and Turnover, Turbine Rotor | 2 | |
| 6796539-202 | TRANSPORTATION AND TURNOVER STAND - AVIALL | 1 | |
| 6796832 | STAND - TRANSPORTATION AND STORAGE, REDUCTION GEAR ASSEMBLY | 2 | |
| 6796878 | STAND - TRANS & STORAGE | 1 | |
| 6797097 | STAND - COMP ROTOR TRANSPORTATION | 1 | |
| 6798033 | Test Stand â Can Be Combined For Testing Gas Turbine Fuel Control And Fuel Pump | 2 | |
| 6799523 | ADAPTER - TRUNION, TURBINE ROTOR STAND | 2 | |
| 6893372 | STAND - TEST, FUEL CONTROL | 1 | |
| 460002880 | TRANSPORT STAND | 1 | |
| 537200140 | In house trans standLHT Dwg No.(537200140) | 1 | |
| 537220232 | Fan frame transport stand LHT typeLHT Dwg No.(537220232) | 1 | |
| 6F7100G00232 | ENGINE TROLLEY / STAND | 1 | |
| 6G6205G11532 | TRANSPORTABLE STAND, SWASHPLATE SUPPORT | 1 | |
| 6SF6811-501 | BOOTSTRAP STAND ADAPTER | 1 | |
| 6SME65B00713 | SHIPPING FXTR, ENG STAND JT9D & ACC | 1 | |
| 703A95-0030-10 | ELECTRICIAN'S STANDARD CASE | 1 | |
| 714AAFLZ | OUTSIDE MICROMETERS / STARRETT ELECTRONIC DIGITAL INTERCHANGEABLE ANVIL (WITH OUTPUT) WITH STANDARD INCH GRADUATIONS ON SHELL AND THIMBLE STARRETT CATALOG NO 714AAFLZ APPROX INCH.0-4_. 0-101 MM EDP NO. 64427 | 1 | |
| 717RS10-C | 717-200 REFERENCE STANDARD FOR THE LOWER CENTER WING SKIN PANELS AT STRINGER 16 &18. PAGES 1-11. MATERIAL: 2024-T3, 7075-T6 &7075-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 7772B-60 | TRENT 7772B-60 ENGINE STAND | 1 | |
| 80-0055 | GROUND COMPASS TRIPOD STAND | 1 | |
| 8000CSA 12 1/2 X 3 | RIVETER/INSERTION TOOL, COMPLETE WITH FOOT CONTROL, HOSES, CONNECTORS, STANDARD ACCESSORIES GROUP AND HARDWARE. READY TO OPERATE. NOTE: DOES NOT INCLUDE PEDESTAL STAND. | 1 | |
| 8000CSA 12 1/2 x 3 | Riveter/Insertion tool, complete with foot control, hoses, connectors, standard accessories group and hardware. Ready to operate. NOTE: Does NOT include pedestal stand. | 1 | |
| 8000CSA 24 1/2 x 3 | Riveter/Insertion tool, complete with foot control, hoses, connectors, standard accessories group and hardware. Ready to operate. NOTE: Does NOT include pedestal stand. | 1 | |
| 8000CSA 9 1/2 x 3 | Riveter/Insertion tool, complete with foot control, hoses, connectors, standard accessories group and hardware. Ready to operate. NOTE: Does NOT include pedestal stand. | 1 | |
| 80RS10 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS14 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS15 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS18 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS19 | Ultrasonic Inspection Reference standard MD-80 | 1 | |
| 80RS21 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS22 | Ultrasonic Inspection Reference standard MD-80 | 3 | |
| 80RS24 | BOEING REFERENCE STANDARD. MATERIALS: -3 DETAIL ALUMINUM SKIN 2024-T351, -5 DETAIL ALUMINUM STRINGER 2024-t351, -7 DETAIL ALUMINUM 7075-T6511, -9 DETAIL ALUMINUM 7075-T73 and -11 DETAIL ALUMINUM 7075-T73. Includes Test Report and Certificate of Conformanc | 1 | |
| 80RS25 | BOEING REFERENCE STANDARD. MATERIALS: -3 DETAIL ALUMINUM SKIN 2024-T351, -5 DETAIL ALUMINUM STRINGER 7075-T6511, -7 DETAIL ALUMINUM 7075-T73. FASTENERS: S4932869-6-6 (8 EA. ), S4932869-8-6 (12 EA. ), S4932869-8-7 (16 EA. ). COLLARS: NAS 1080-06 (8 EA... | 1 | |
| 80RS4 | Ultrasonic Inspection Reference standard MD-80 | 1 | |
| 80RS6 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS7 | Ultrasonic Inspection Reference standard MD-80 | 1 | |
| 81602-FH385-1005 | REFERENCE STANDAR ULTRASONIC | 1 | |
| 833663-1 | CDU ACTUATOR PNEUMATIC CONTROL STAND | 1 | |
| 834273-1 | FUEL CONTROL TEST STAND ADAPTOR | 1 | |
| 834411-1 | FUEL CONTROL STAND ASSEMBLY | 1 | |
| 834612-1 | FUEL CONTROL STAND ASSEMBLY | 1 | |
| 8493 | CENTRIFUGE TUBE WITH STAND | 4 | |
| 82553 | 82553;Tripod; Dolly; Stand | 1 | |
| 8546607 | ADAPTOR ASSY, REAR TRANSPORTATION STAND | 3 | |
| 8547010 | STAND, ENGINE TRANSPORT | 5 | |
| 8547213 | TRANSIT / DRESSING STAND FRONT TRUNNION | 4 | |
| 856A1016 | STAND, COMPRESSOR ROTOR AND HPTR VERTICAL (STAND) | 1 | |
| 856A1016G04 | STAND, COMPRESSOR ROTOR AND HPTR VERTICAL (STAND) | 1 | |
| 856A1016G05 | Stand Vert HPCR/HPTR | 10 | |
| 856A1301G01 | STAND HPCR/HPTR&BAL MASTERS | 1 | |
| 856A1301G02 | STAND HPCR/HPTR&BAL MASTERS | 1 | |
| 856A2523 | TRANSPORTATION STAND | 1 | |
| 856A2528 G01 | Stand Storage and Transportation | 7 | |
| 856A2528G01 | STAND STORAGE & TRANSP. | 7 | |
| 856A2544 G02 | TRF STAND | 7 | |
| 856A2647 | STAND, MOBILE HORIZONTAL MAJOR MODEULE 3 STORAGE AND TRANSPORTATION BATIMOBILE. TURBINE BP | 1 | |
| 856A2647G01 | STAND, TRANSPORTATİON/STORE, MAJOR MODULE 3 | 2 | |
| 856A2647G02 | STAND TRANS/STORE | 12 | |
| 856A3111G07 | DOLLY, TRUNNION - FAN FRAME MODULE (STAND) G04 | 1 | |
| 866-0205-101 | STANDBY FLIGHT INSTRUMENT SENSOR (SFIS) | 1 | |
| 8784B-NB | US DOT STANDARD 3600PSI NITROGEN BOTTLE FOR PART # 8784B | 1 | |
| 8800-R-SILVER | 8800-R-SILVER;1yr. Renewal Standard Full Maintenance Contract 8800SX Existing Equipment | 1 | |
| 8843050S00 | GULFSTREAM 280 BUSINESS JET - ENGINE STAND | 1 | |
| 895-3900-06-101 | BOX ELECTRO-AVIONICS STANDART TOOLS | 1 | |
| 8C3128 | STAND - ROLL-OVER SUB ASSEMBLY - FHF/TRF MODULE | 1 | |
| 8C3405 | STAND - TROLLEY - AGBX | 1 | |
| 8C3483 | STAND - TROLLEY - AGBX - ADAPTERS | 1 | |
| 8C3505 | STAND - TROLLEY - TGBX | 1 | |
| 90-LS1004 | Bowers Lead standard for straight threads, NPS threads | 1 | |
| 90-LS5003M | Bowers Lead standard for metric threads | 1 | |
| 90-LS5004M | Bowers Metric Lead Standard 1, 1.5, 2,3 & 4mm | 1 | |
| 9043 | Dill Air Controls 9043 Standard Bore High Pressure Strut Coupler - .375-24 Hose Connector - 3,000 PSIG | 3 | |
| 90676 | 90676;390XOPT611 TETRA MS; MTP-850; AutoTest Incl Opt054 standard; Req Opt110;115 | 1 | |
| 91-509 | APU-TROLLEY, CRADLE-STAND BASE | 2 | |
| 920716-1-1 | ELECTRICAL TEST STAND ACTUATOR AILERON | 1 | |
| 932 01 | STAND ENGINE / POWER PLANT TRANSPORTATION (AL | 1 | |
| 932-01 | STAND, ENGINE/POWER PLANT TRANSPORTATION | 1 | |
| 932−01 | Stand − Engine / Power Plant Transportation (Alternate Procurement P/N G601R− 710004−161). | 1 | |
| 94126 | Cordless Electric Scissor Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Standard Blade Assembly) (Add to cart: Contact us to order) | 1 | |
| 94128 | Cordless Electric Scissor Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Standard Blade Assembly) (Add to cart: Contact us to order) (Description: Blade Assembly with Shoe) (Add to cart: Contact us to order) | 1 | |
| 95-92134-0001 | ELECTRIC AND/OR ELECTRONIC STANDARD TOOL KIT | 1 | |
| 956A1245 | ADAPTER - STRONGBACK - CORE BUILD STAND | 1 | |
| 956A7544G02 | Engine Stand- Transportation LEAP | 1 | |
| 956A7644G03 | LEAP-1A ENGINE TRANSPORTATION STAND | 4 | |
| 956A7644G04 | LEAP-1A ENGINE TRANSPORTATION STAND | 1 | |
| 956A8600G04 | LEAP-1B ENGINE TRANSPORT RACK/STAND, SHIPPING-ENGINE ASSEMBLY | 3 | |
| 98A52003000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A52003001 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A52003002 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A52003003 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 98A52003004 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A53003003 | Ultrasonic Inspection reference standard A300 | 1 | |
| 98A53803016 | Ultrasonic Inspection reference standard A300 | 1 | |
| 98A53803018000 | Ultrasonic Inspection Reference Standard A300-600 | 2 | |
| 98A53803019000 | Ultrasonic Inspection Reference standard A300 | 3 | |
| 98A53803020000 | Ultrasonic Inspection Reference standard A300 | 3 | |
| 98A54003069 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A54003098000 | Ultrasonic Inspection Reference standard A300-600 | 1 | |
| 98A57103016 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A57103016001 | Ultrasonic Inspection Reference standard A300-600 | 2 | |
| 98A57103020000 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 98A57103023000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98D49207527000 | SUPPORT FRAME FOR APU WITH TROLLEY (MAINT STAND ) | 31 | |
| 98D71203022001 | IDG STAND TROLLEY | 5 | |
| 98F54003006000 | PYLON TRANSPORT STAND | 1 | |
| 98F54003009000 | TROLLEY STAND FOR RR TRANT 700 PYLON | 6 | |
| 98S51605000-202 | ATR NDT REFERENCE STANDARD | 1 | |
| 98S51605000-204 | ATR NDT REFERENCE STANDARD | 1 | |
| 98S51605000-206 | ATR NDT REFERENCE STANDARD | 1 | |
| 98S51605000-208 | ATR NDT REFERENCE STANDARD | 1 | |
| 98S51605000-210 | ATR NDT REFERENCE STANDARD | 1 | |
| 98S51605001-200 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 2024T3 | 4 | |
| 98S51605001-202 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 15-5PH | 3 | |
| 98S51605001-204 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 TA6V | 3 | |
| 98S51605001-206 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 | 3 | |
| 98S51605001-208 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 | 3 | |
| 98S51605001-212 | AR Standard, ATR72 PT6 51-60-00:PG629 FIG616 SHT1 2024T3 | 4 | |
| 98S51605001-214 | ATR Standard, ATR72 PT6 51-60-00:PG629 FIG616 SHT1 15-5PH | 4 | |
| 98S51605001-216 | ATR Standard, ATR72 PT6 51-60-00:PG629 FIG616 SHT1 TA6V | 3 | |
| 98S51605001-218 | ATR Standard, ATR72 PT6 51-60-00:PG629 FIG616 SHT1 2024T3 | 3 | |
| 98S51605001-218-5 | ATR Standard, ATR72 PT6 51-60-00:PG629 FIG616 SHT1 2024T3, .375 thru .625, no countersink | 1 | |
| 98S51605001-219 | ATR Standard, ATR72 PT6 51-60-00:PG629 FIG616 SHT1 | 1 | |
| 98S51605001-220 | ATR Standard, ATR72 PT6 51-60-00:PG629 FIG616 SHT1 15-5PH | 4 | |
| 98S51605001-222 | ATR Standard, ATR72 PT6 51-60-00:PG629 FIG616 SHT1 TA6V | 3 | |
| 98S51605001-224 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 2024T3 | 4 | |
| 98S51605001-226 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 15-5PH | 3 | |
| 98S51605001-228 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 TA6V | 3 | |
| 98S51605001-230 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 2024T3 | 4 | |
| 98S51605001-232 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 15-5PH | 3 | |
| 98S51605001-234 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 TA6V | 3 | |
| 98S520305008-200 | ATR72 REFERENCE STANDARD PT 6 52-31-04 PAGE 603 FIGURE 601. Material: 2024-T62. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S52305005-000 | Calibration Standard, ATR42 PT4 52-31-04:PG404 FIG401 | 4 | |
| 98S52305005-002 | Calibration Standard, ATR72 PT4 52-31-04:PG411 FIG402 | 1 | |
| 98S52305008-200 | Calibration Standard, ATR42-400/500 PT6 52-31-04:PG603 FIG601 | 2 | |
| 98S523104-ATR72/42 | Calibration Standard, ATR72 PT6 52-31-04: PG603 FIG601, SB52-1057 or SB52-1058 | 1 | |
| 98S53005005 | Calibration Standard, ATR42 PT6 53-61-03:PG607 FIG601 SHT2 | 1 | |
| 98S53005005-000 | Calibration Standard, ATR42 PT6 53-31-01:PG606 FIG601 SHT1 | 3 | |
| 98S53005006-000 | Calibration Standard, ATR42 PT6 53-31-01:PG606 FIG601 SHT1 | 3 | |
| 98S53005007-000 | Calibration Standard, ATR42 PT6 53-31-04:PG606 FIG601 SHT1 | 2 | |
| 98S53005008-000 | Calibration Standard, ATR42 PT6 53-31-21:PG608 FIG601 SHT1 | 3 | |
| 98S53005009-000 | Calibration Standard, ATR42 PT6 53-51-02:PG608 FIG601 | 3 | |
| 98S53005010-000 | Calibration Standard, ATR42 PT6 53-51-03:PG606 FIG601 | 3 | |
| 98S53005011-000 | Calibration Standard, ATR42 PT6 53-61-01:PG606 FIG601 SHT1 | 3 | |
| 98S53005012 | Calibration Standard, ATR42 PT6 53-61-03:PG606 FIG601 | 1 | |
| 98S53005012-000 | ATR Standard, ATR42 PT6 53-81-14:PG606 FIG601 SHT1 | 3 | |
| 98S53005013-000 | ATR Standard, ATR42 PT6 53-81-14:PG607 FIG601 SHT2 | 3 | |
| 98S53005014-000 | Calibration Standard, ATR42 PT4 53-56-52:PG405-408 FIG402 | 3 | |
| 98S53005014-000A | Calibration Standard, ATR42 PT4 53-56-52:PG406 FIG402 SHT2 | 1 | |
| 98S53005014-000B | Calibration Standard, ATR42 PT4 53-56-52:PG407 FIG402 SHT3 | 1 | |
| 98S53005014-000C | Calibration Standard, ATR42 PT4 53-56-52:PG408 FIG402 SHT4 | 1 | |
| 98S53005014-000D | Calibration Standard, ATR42 PT4 53-56-52:PG408 FIG402 SHT4 | 1 | |
| 98S53005015-000 | Calibration Standard, ATR42 PT6 53-51-01:PG608 FIG601 | 3 | |
| 98S53005016-000 | ATR Standard ATR42 PT4 53-51-20 PG 407/408 FG 402 | 3 | |
| 98S53005017-000 | Calibration Standard, ATR42 PT6 53-81-16:PG606 FIG601 | 3 | |
| 98S53005018-000 | Calibration Standard, ATR42 PT6 53-81-16:PG607 FIG601 | 3 | |
| 98S53005020-000 | Calibration Standard, ATR72 PT6 53-00-01:PAGE 608 FIG 601, Includes P1 thru P8 | 4 | |
| 98S53005020-000/1 | ATR CALIBRATION STANDARD ATR72 Part 6 53-00-01 Page 608 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S53005020-000/2 | ATR CALIBRATION STANDARD ATR72 Part 6 53-00-01 Page 609 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S53005020-200 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-202 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-204 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-206 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-208 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005020-210 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-212 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-214 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-216 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005021-000 | ATR72 Calibration Standard Drawing PT6 53-51-01 PG 608, Figure 601 | 3 | |
| 98S53005024-000 | ATR CALIBRATION STANDARD 53-61-03 PT6 PG 606 | 2 | |
| 98S53005025-000 | ATR CALIBRATION STANDARD 53-61-02 PT 6 PG 606 | 2 | |
| 98S53005026-000 | ATR CALIBRATION STANDARD 53-61-01-PT6 PG 606 | 2 | |
| 98S53005027-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-61-01 FIGURE 606 SHEET 1. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005028-000 | ATR CALIBRATION STANDARD 53-31-04 PT 6 PG 606 | 2 | |
| 98S53005029-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-31-01 FIGURE 601 SHEET 1. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005030-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-31-21 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005031-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-31-04 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005032-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-61-01 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005033-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-61-02 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53105000-200 | Calibration Standard, ATR42 PT6 53-11-23:PG612 FIG603 | 2 | |
| 98S53305002-200 | CALIBRATION STANDARD - ATR72 | 4 | |
| 98S53305002-200/19MM | ATR Standard w/ 19mm Lug Hole, ATR72 PT4 53-37-06:PG405 FIG401 SHEET2, 2024T3, .685 thick | 1 | |
| 98S53305002-200/23MM | ATR Standard w/ 23mm Lug Hole, ATR72 PT4 53-37-06:PG405 FIG401 SHEET2, 2024T3, .685 Thick | 1 | |
| 98S53305004-000 | Calibration Standard, Bonded, ATR72 PT4 53-31-01:PG404 FIG401 | 5 | |
| 98S53305004000 | CALIBRATION STANDARD, BONDED WITH FLAT STRINGER, ATR72 PT4 53-31-01:PG404 FIG401 | 5 | |
| 98S53305005-000 | Calibration Standard, Bonded, ATR72 PT4 53-31-21:PG404 FIG401 | 5 | |
| 98S53305005000 | SKIN STRINGER CALIBRATION STANDARD (ULTRASON) | 5 | |
| 98S53505003-200 | Calibration Standard, ATR72 PT4 53-56-0: PG405 FIG 402 | 4 | |
| 98S53505004000 | SKIN CALIBRATION STANDARD STRG;11 AND STRG;17 | 1 | |
| 98S53505005000 | SKIN CALIBRATION STANDARD STRG.4 | 1 | |
| 98S53505006-000 | Calibration Standard, ATR72 PT4 53-51-23:PG408 FIG 403 | 4 | |
| 98S53605002000 | CALIBRATION STANDARD STR.3, 11ET17 | 1 | |
| 98S53805002-000 | Calibration Standard, ATR42 PT6 53-61-18:PG609 FIG603 | 6 | |
| 98S53805003000 | SKIN CALIBRATION STANDARD STR.4 AND 17 | 1 | |
| 98S54305001-200 | Calibration Standard, ATR42 PT4 54-31-70 PG403 FIG 401 | 4 | |
| 98S54305001-202 | Calibration Standard, ATR42 PT4 54-31-70 PG409 FIG 401 | 4 | |
| 98S54305002-200 | ATR REFERENCE STANDA | 5 | |
| 98S57105003-200 | Calibration Standard, ATR42 PT4 57-15-21:PG404 FIG401 | 4 | |
| 98S57105004-200 | Calibration Standard, ATR72 PT4 57-15-21 PG403 FIG 401 | 4 | |
| 98S57105005-200 | Calibration Standard, ATR42 PT4 57-12-11:PG404 FIG401 | 4 | |
| 98S57105006-200 | Calibration Standard, ATR72 PT4 57-12-11 PG404 Figure 401 | 3 | |
| 98S57105007-200 | Calibration Standard, ATR42 PT4 57-14-03:PG403 FIG401 | 3 | |
| 98S57105009-200 | Calibration Standard, ATR42 PT4 57-15-10:PG403 FIG401 | 3 | |
| 98S57105010-200 | Calibration Standard, ATR72 57-15-10 PT4:PG404 FIG402 | 3 | |
| 98S57105011-200 | Calibration Standard, ATR42 PT4 57-15-11:PG403 FIG401 | 3 | |
| 98S57105012-200 | Calibration Standard, ATR72 PT4 57-15-11 PG403 FIG 401 | 3 | |
| 98S57105015-200 | ATR REFERENCE STANDARD ATR72 Part 4 57-14-03 Page 403 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105016-200 | ATR CALIBRATION STANDARD Part 6 57-14-04 Page 603 Figure 601. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105019-200 | ATR CALIBRATION STANDARD Part 6 57-14-01 Page 603 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105019200 | Calibration Standard, ATR42 PT6 57-14-01 PG603 FIG 601 | 3 | |
| 98S57105030-200 | Calibration Standard. ATR42 PT4 57-12-12:PG404 FIG401 | 4 | |
| 98S57105031-200 | ATR REFERENCE STANDARD ATR42-400/500 Part 4 57-12-12 Page 404 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S57105032-200 | ATR72 Calibration Standard Drawing PT4 57-12-12 PG 404, Figure 401 | 3 | |
| 98S57105032-202 | ATR72 Calibration Standard Drawing PT4 57-12-12 PG 405, Figure 402 | 3 | |
| 98S57105033-200 | ATR REFERENCE STANDARD ATR42-400/500 Part 4 57-12-11 Page 404 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S57105034-200 | ATR REFERENCE STANDARD ATR42-400/500 Part 4 57-14-03 Page 403 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S57105037-000 | Calibration Standard. ATR42 PT4 57-14-00:PG403 FIG401 | 1 | |
| 98S571400 | Calibration Standard, ATR42 PT6 52-14-00:PG603 FIG601 | 1 | |
| 98S57205024-200 | ATR Standard, ATR42 PT4 57-24-09:PG403 FIG401 | 3 | |
| 98S57205025-200 | ATR Standard, ATR42 PT4 57-24-10:PG403 FIG401 | 3 | |
| 98S57205026-200 | ATR Standard, ATR42 PT4 57-24-12:PG403 FIG401 | 3 | |
| 98S57205027-200 | ATR Standard, ATR42 PT4 57-24-15:PG403 FIG401 | 3 | |
| 98S57205027-202 | ATR Standard, ATR42 PT4 57-24-15:PG404 FIG402 | 3 | |
| 98S57205030-004 | COMPOSITE LIGHTNING REFERENCE STANDARD..FOR ATR72 PT 4 51-40-00: REFERENCE DRAWING | 5 | |
| 98S57205030.001 | COMPOSITE LIGHTNING REFERENCE STANDARD..FOR ATR72 PT 4 51-40-00: REFERENCE DRAWING | 4 | |
| 98S57205030.001-.005 | ATR72 REFERENCE STANDARD SET OF 5 PT 4 51-40-00 | 1 | |
| 98S57205030.004 | COMPOSITE LIGHTNING REFERENCE STANDARD..FOR ATR72 PT 4 51-40-00: REFERENCE DRAWING | 5 | |
| 98S57205030.005 | ATR72 REFERENCE STANDARD SET OF 5 | 2 | |
| 98S57205030001 | CALIBRATION STANDARD, ATR72, DRAWING REF: 22S57213396 | 4 | |
| 98S57205030003 | CALIBRATION STANDARD, ATR72, DRAWING REF: 22S5721 | 2 | |
| 98S57205030004 | CALIBRATION STANDARD, ATR72, DRAWING REF: 22S57213396 | 5 | |
| 98V55308854000 | Stand supportrudder | 4 | |
| 99A53003002000 | Ultrasonic Inspection Reference standard A310 | 1 | |
| 99A53107251000 | Ultrasonic Inspection Reference standard A310 | 2 | |
| 99A53307274000 | Ultrasonic Inspection Reference standard A318-312-320-321 | 5 | |
| 99A53803009000 | Ultrasonic Inspection Reference standard A300 | 2 | |
| 99A54403002000 | Ultrasonic Inspection Reference standard A300 | 3 | |
| 99A54403003000 | Ultrasonic Inspection Reference standard A300-600 | 2 | |
| 99A55107288000 | Ultrasonic Inspection Reference standard A300-600 | 2 | |
| 99A55107289000 | Ultrasonic Inspection Reference standard A300-600 | 2 | |
| 99A55109003000 | Ultrasonic Inspection Reference standard A300-600 | 1 | |
| 99A55109005000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 99A55507222000 | Ultrasonic Inspection Reference standard A300-600 | 1 | |
| 99A55507240000 | Ultrasonic Inspection Reference standard A300-600 | 1 | |
| 99A55507253000 | Ultrasonic Inspection Reference standard A300-600 | 1 | |
| 99A57004001285 | Ultrasonic Inspection Reference standard A300 | 2 | |
| 99A57004001320 | Ultrasonic Inspection Reference Standard A310 | 2 | |
| 99A57004009000 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 99A57004010000 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 99A57004012000 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 99A57103000 | Ultrasonic Inspection Reference standard A310 | 1 | |
| 99A57103001000 | Ultrasonic Inspection Reference Standard A310 | 1 | |
| 99A57103003000 | Ultrasonic Inspection Reference Standard A310 | 1 | |
| 99A57103005002 | Ultrasonic Inspection Reference standard A310 | 3 | |
| 99A57103007000 | Ultrasonic Inspection Reference Standard A300-600 | 2 | |
| 99A57103009000 | Ultrasonic Inspection Reference standard | 2 | |
| 99A57103010000 | Ultrasonic Inspection Reference Standard A300-600 | 2 | |
| 99A57103011000 | Ultrasonic Inspection Reference Standard A300 | 2 | |
| 99A57103012000 | Ultrasonic Inspection Reference Standard A300 | 2 | |
| 99A57103025001 | Ultrasonic Inspection Reference Standard A300 | 3 | |
| 99A57103028000 | Ultrasonic Inspection Reference Standard A300-600 | 3 | |
| 99A57103029000 | Ultrasonic Inspection Reference Standard A300 | 4 | |
| 99A57103030000 | Ultrasonic Inspection Reference standard A300 | 4 | |
| 99A57103031000 | Ultrasonic Inspection Reference Standard A300-600 | 2 | |
| 99A57103033000 | Ultrasonic Inspection Reference Standard A310 | 2 | |
| 99A57103036000 | Ultrasonic Inspection Reference standard A310 | 2 | |
| 99A57103037000 | Ultrasonic Inspection Reference standard A310 | 1 | |
| 99A57103038000 | Ultrasonic Inspection Reference Standard A310 | 2 | |
| 99A57103041000 | Ultrasonic Inspection Reference Standard A300-600 | 3 | |
| 99A57103042000 | Ultrasonic Inspection Reference Standard A300-600 | 2 | |
| 99A57103043000 | Ultrasonic Inspection Reference Standard A300-600 | 2 | |
| 99A57103044000 | Ultrasonic Inspection Reference Standard A300-600 | 2 | |
| 99A57104331000 | Ultrasonic Inspection Ultrasonic Reference standard A300 | 1 | |
| 99A57104332000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 99A57104333000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 99A57104334000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 99A57104335000 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 99A57104336000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 99A57104337000 | Ultrasonic Inspection Reference standard A300 | 2 | |
| 99A57104338000 | Ultrasonic Inspection Reference standard A300 | 2 | |
| 99A57104340000 | Ultrasonic Inspection Reference standard A300 | 2 | |
| 99A57104359000 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 99A57104361000 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 99A57204360000 | Ultrasonic Inspection Reference standard A300 | 2 | |
| 99A57204375000 | Ultrasonic Inspection Reference Standard A300 | 2 | |
| 99A57204379000 | Ultrasonic Inspection Reference Standard A300 | 2 | |
| 99A57204387000 | Ultrasonic Inspection Reference standard A310 | 3 | |
| 99A57204390000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 99A57204390001 | Ultrasonic Inspection Reference Standard A300-600 | 1 | |
| 99A57204392000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 99A57204394000 | Ultrasonic Inspection Reference standard A310 | 4 | |
| 99A57204400000 | Ultrasonic Inspection Reference Standard A310 | 1 | |
| 99A57204401000 | Ultrasonic Inspection Reference standard A310 | 3 | |
| 99A57204402000 | Ultrasonic Inspection Reference Standard A310 | 2 | |
| 99A57204403001 | Ultrasonic Inspection Reference standard A310 | 5 | |
| 99A57204406000 | Ultrasonic Inspection Reference Standard A300 | 2 | |
| 99A57204408000 | Ultrasonic Inspection Reference Standard A300 | 2 | |
| 99A57204409000 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 99A57204410000 | Ultrasonic Inspection Reference standard | 2 | |
| 99A57204425000 | Ultrasonic Inspection Reference Standard A300-60 | 2 | |
| 99A57703000000 | Ultrasonic Inspection Reference Standard A310 | 2 | |
| 99D51107295000 | Ultrasonic Inspection Reference Standard A310 | 5 | |
| 99D51407291001 | ELECTRICAL STANDARDS | 7 | |
| 99D52103001000 | Ultrasonic Inspection Reference standard A318-319-320-321 | 3 | |
| 99D53103000000 | Ultrasonic Inspection Reference standard A318-319-320-321 | 5 | |
| 99D53207304000 | Ultrasonic Inspection Reference standard A318-319-320-321 | 5 | |
| 99D54403000004 | Ultrasonic Inspection Reference standard A318-319-320-321 | 7 | |
| 99D54403002000 | Ultrasonic Inspection Reference standard A318-319-320-321 | 4 | |
| 99D54403003000 | Ultrasonic Inspection Reference standard A318-319-320-321 | 4 | |
| 99D57103002000 | Ultrasonic Inspection Reference Standard A300 | 3 | |
| 99D57103002001 | Ultrasonic Inspection Reference standard A318-319-320-321 | 5 | |
| 99D57103004000 | Ultrasonic Inspection Reference Standard Ultrasonic Inspection A318-319-320-321 | 4 | |
| 99D57103005001 | Ultrasonic Inspection Reference standard A318-319-320-321 | 5 | |
| 99D57103008000 | Ultrasonic Inspection Reference Standard A318-319-320-321 | 6 | |
| 99D57103009000 | Ultrasonic Inspection Reference Standard A318-319-320-321 | 4 | |
| 99D57103010000 | Ultrasonic Inspection Reference Standard A318-319-320-321 | 5 | |
| 99D57103011000 | Ultrasonic Reference standard A318-319-320-321 | 5 | |
| 99D57103013000 | Ultrasonic Reference standard A318-319-320-321 | 6 | |
| 99D57103014000 | Ultrasonic Reference standard A318-319-320-321 | 5 | |
| 99D57103017000 | Ultrasonic Reference standard A318-319-320-321 | 5 | |
| 99D57103018000 | Ultrasonic Reference standard A318-319-320-321 | 4 | |
| 99D57103019000 | Ultrasonic Reference standard A318-319-320-321 | 4 | |
| 99D57204107000 | Ultrasonic Inspection Reference Standard A318-319-320-321 | 6 | |
| 99D57504109000 | Ultrasonic Inspection Reference Standard A318-319-320-321 | 3 | |
| 99F53303015000 | ULTRASONIC TEST STANDARD | 2 | |
| 99F53303020000 | Ultrasonic Inspection Reference standard A300 | 3 | |
| 99F53303105000 | AIRBUS A330 REFERENCE STANDARD. 53-30-30-991-003-A , PAGE 6. FUSELAGE LONGITUDINAL BUTT JOINT ATSTR 30, FROM 38 TO FR 40, LH/RH. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303115000 | AIRBUS REFERENCE STANDARD A330 53-30-54 PAGE 6. US INSPECTION OF FUSELAGE INTERNAL STRUCTURE, SKIN PANEL JUNCTION WITH FR53.2 BULKHEAD FWD FACE BETWEEN STR39 AND STR42. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F53307305001 | AIRBUS REFERENCE STANDARD A330 51-31-80 PB6 PAGE 12. A340 53-31-81 PB6 PAGES 609-610. Includes Certification Report traceable to NIST and Certificate of Conformance. | 5 | |
| 99F54403000001 | ULTRASONIC TEST STANDARD | 1 | |
| 99F57204106000 | ULTRASONIC TEST STANDARD | 4 | |
| 99F57204135000 | ULTRASONIC TEST STANDARD | 4 | |
| 99F57204136000 | ULTRASONIC TEST STANDARD | 4 | |
| 99F57204137000 | ULTRASONIC TEST STANDARD | 4 | |
| 99F57204138001 | ULTRASONIC TEST STANDAR | 4 | |
| 9C6001 | GO5 BASIC TRANSPORTATION STAND GE90 ENGINE | 1 | |
| 9C6001G05 | BASIC TRANSPORTATION STAND | 2 | |
| 9C6001G07 | TRANSPORTATION STAND | 3 | |
| 9C6017G01 | STAND - TRANSFER, FAN STATOR CASE, GE90-70/80/90 | 1 | |
| 9C6017G02 | STAND - TRANSFER, FAN STATOR CASE, GE90-70/80/90 | 1 | |
| 9C6017G03 | STAND - TRANSFER, FAN STATOR CASE, GE90-70/80/90 | 1 | |
| 9C6025 | TRANSPORT STAND (FOR GE90-115B ) | 1 | |
| 9C6025P-03 | GE90-94B AND -115B ENGINE TRANSPORT STAND | 1 | |
| 9C6025P01 | STAND ENG TRANSPORTA | 2 | |
| 9C6025P02 | STAND ENG TRANSPORTA | 1 | |
| 9C6025P02-PPK | ENGINE SHIPPING TRANSPORT STAND | 1 | |
| 9C6025P03 | STAND ENG TRANSPORTA | 1 | |
| 9C6025P04 | STAND - SHIPPING, DELUXE AIR/TRUCK, ENGINE CRADLE AND TRANSPORT | 1 | |
| 9C6025P05 | STAND - SHIPPING, DELUXE AIR/TRUCK, ENGINE CRADLE AND TRANSPORT | 1 | |
| 9C6030 | STAND - TRANSFER, FAN STATOR CASE, GE90-70/80/90 AND -100 SERIES ENGINES | 1 | |
| 9C6030P01 | STAND - TRANSFER, FAN STATOR CASE, GE90-70/80/90 AND -100 SERIES ENGINES | 2 | |
| 9C9716F5A391 | MLG STRUT STAND | 1 | |
| 9RS12 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 9RS17 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 9RS22 | Ultrasonic Inspection Reference standard MD-80 | 1 | |
| 9SME65B00713 | SHIPPING FXTR, ENG STAND JT9D & ACC | 1 | |
| 9С6017G02 | CARRIAGE, TRANSFER - FAN STATOR CASE IF STAND 9C6025P02 USED | 1 | |
| A0BA5525 | STAND - TRANSPORTATION | 1 | |
| A0BA6052 | STAND - TRANSPORTATION | 1 | |
| A1-300.04 | TRIPOD JACKS SET WITH CONTROL STAND | 1 | |
| A1-300.04 & A1-1200.01 | HYDRO TRIPOD JACKS SET WITH CONTROL STAND | 1 | |
| A1-300.04 - x2 (WINGS) - 120t A1-1200.01 - x1 (NOSE) - 30t | HYDRO tripod jack set wide body with control stand A300/A310 /A330/A340 with Automatic Safety Nut Lock Manufacturer: LFT Lukassen (now Hydro)- MFD:1990 | 1 | |
| A2482FG701 | 8TJ141 TRANSFER STANDARD FIXTURE | 1 | |
| A27081-1 | Readout and Control Equipment - Functional Test Stands | 3 | |
| A27081-2 | READOUT AND CONTROL EQUIPMENT - FUNCTIONAL TEST STANDS | 1 | |
| A30199 | MECHANICAL PLIERS. THIS TOOL IS USED FOR ELECTRICAL STANDARD PRACTICES. | 8 | |
| A32057-1 | STAND BUILD-UP STRUT NLG | 2 | |
| A32068-7 | TEST STAND - TRUCK POSITIONER, MAIN LANDING GEAR (MLG) | 1 | |
| A32119-1 | TEST STAND ASSEMBLY - TRUCK POSITIONER, MAIN LANDING GEAR (MLG) | 1 | |
| A341-800 | TRAVEL COVER, Light Weight Travel Bubble Cover, STANDARD CABIN | 1 | |
| A523-71020-010W8200-01 | TRANSPORTATION STAND MDCD | 1 | |
| A523-72010-016W8100-01 | TRANSPORTATION STAND LOWER CARGO DOOR | 1 | |
| A523-72010-016W8100-01A00 | TRANSPORTATION STAND LOWER CARGO DOOR | 1 | |
| A76001-1 | TEST FIXTURE - THRUST LEVER, CONTROL STAND | 1 | |
| AB71001-H07 | STAND TRANSPORT & SHIPPINGLEASE | 1 | |
| AB71001-H08 | STAND TRANSPORT & SHIPPINGLEASE | 1 | |
| AB71001-YD9 | CRADLE WITH TRANSPORTATION STAND V2500ENGINESTANDS24 | 1 | |
| AB71003-P5X | STAND TRANSPORT & SHIPPINGBASE MAINTENANCE | 1 | |
| ACS28005 | STAND-LOWER FORWARD COWL SUPPORT/TRANSPORT | 4 | |
| ACS87009 | SUPPORT / TRANSPORT STAND, FAN COWLS | 2 | |
| ACWM-ATR72 | Wheel Standard, ATR72 Main | 1 | |
| AE3007 | TRANSPORT STAND | 1 | |
| AE3007 TRANSPORTATION STAND | AE3007 ENGINE TRANSPORTATION STAND | 1 | |
| AF- 4120 | LOW FREQUENCY RING PROBE, 10KHZ-100KHZ, REFLECTION, .405"ID, .800"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. USED WITH REFERENCE STANDARD: NDT1102-100 TI | 1 | |
| AF-4084 | LOW FREQUENCY REFLECTION RING PROBE, 800HZ-10KHZ, .320"Ø ID,.600"Ø OD x .700"H, WITH TRIAX FISCHER CONNECTOR. REFERENCE: 767 PART 6 53-10-22, NDT6075 REFERENCE STANDARD. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4092 | LOW FREQUENCT RING PROBE, 500Hz-3KHz. REFLECTION, 1.00" OD, .510" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4101 | LOW FREQUENCT RING PROBE, 1-10KHz. REFLECTION, .700" OD, .350" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4102 | LOW FREQUENCT RING PROBE, 50Hz-5KHz. REFLECTION, .700" OD, .350" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4105/TF | Surface Probe, Standard Bridge Detachable Surface Probe with a diameter of .31 in. (7.9 mm) and a operating range of 1 kHz - 50 kHz (equivalent to SPO-1284, SPO-1596), Triax Fischer/ LEMO Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4120 | LOW FREQUENCY RING PROBE, 10KHz-100KHz, REFLECTION, .405"ID, .800"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. USED WITH REFERENCE STANDARD: NDT1102-100 Ti | 1 | |
| AF-4124/300H | REFLECTION RING PROBE TRIAX FISHER CONNECTOR, 1.25"OD .75" ID(19.6mm) 300HZ-1KHZ. 737 PART 6 57-10-53, pg.2, USED WITH REFERENCE STANDARD NDT3168 AND NDT3176-X. Includes test report and Certificate of Conformance. | 1 | |
| AF-4125/100H | CUSTOM REFLECTION RING PROBE 1.2" OD, .605" ID, 50Hz-3KHz TRIAX FISHER CONNECTOR. 737 PART 6 57-10-58, pg.2. and 737 PART 6 57-10-54, pg.2 USED WITH NDT3153-X AND 3167-X SERIES REFERENCE STANDARDS. Includes Test Report and Certificate of Conform... | 1 | |
| AF-4153/TI | LOW FREQUENCY RING PROBE 1-15KHz, REFLECTION, ID.565" OD.910",SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT 3225. | 1 | |
| AF-4202 | LOW FREQUENCY REFLECTION RING PROBE, 500HZ-5KHZ, ID 0.325", OD 0.790" (MAX). 1.05" HEIGHT. TRIAX FISCHER CONNECTOR. USED WITH NDT6097 REFERENCE STANDARD Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4334 | Low Frequency Reflection Ring Probe, 40Hz-500Hz. 1.3"Ø I.D. 2.0"Ø O.D., supplied with a Triax Fischer Connector. REFERENCE STANDARD: NDT7035. Includes test report and Certificate of Conformance. | 1 | |
| AF-4335 | LOW FREQUENCY REFLECTION RING PROBE, 300Hz-1KHz .425"Ø ID SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance.....USED WITH 717-200 REFERENCE STANDARD P/N: 717RS10-C | 1 | |
| AF-5278/TF | HIGH FREQUENCY SURFACE PROBE, Twin Coil Differential 50-500KHZ. 4.0" Long 0.375" Diameter with Triax Fischer connector. For use with Boeing Reference Standard 497 767 Part 6 53-00-04. IncludesTest Report and Certificate of conformance. | 1 | |
| AF-6006 | SLIDING PROBE, REFLECTION, 1-40KHZ TRIAX FISHER CONNECTOR. REFERENCE STANDARD USED ( NDT1099) 757 PT. 6, 53-30-14. Includes Certification Report and COC. | 1 | |
| AFC-169 | BOEING REFERENCE STANDARD TRANSDUCER POSITIONER TRANSDUCER POSITIONER TRANSDUCER POSITIONER CONTACT TRANSDUCER | 1 | |
| AFK-1014 | Custom Ultrasonic Kit, PART 4 53-10-13 for the WING REAR SPAR - STA 663.75 REAR SPAR BULKHEAD SIDE FRAME FITTING FAIL SAFE STRAP. Kit includes 1 of each AFM-560AT & AFS-0541 Transducers, 1 NDT3312 Reference Standard and 1 ABNC-MD6. Supplied with a waterpr | 1 | |
| AFK-1030 | Cusom Ultrasonic Inspection Kit for Boeing 787. Kit contents include: NDT815 reference standard. Transducer part numbers: AFS-0570-1R, AFS-0570-1L, AFS-0570-2R, AFS-0570-2L, AFS-0570-3R, AFS-0570-3L, AFS-0570-4R, AFS-0570-4L, AFS-0570-5R, AFS-0570-5L | 1 | |
| AFK-1031UT | NDT STANDARDS AND TRANSDUCERS KIT | 1 | |
| AFK-AUR9 | Scanner Probe kit, ""SUB"" scanner series:9 probes with standard working lengths. Probes "SUB-8-10, SUB-10-12, SUB-12-14, SUB-14-16, SUB-16-18, SUB-18-20, SUB-20-24, SUB-24-28, SUB-28-32. Includes shipping/ transport kit capable of storing scanner cable a | 1 | |
| AFNDT-3071 | Custom designed eddy current multi-layer aircraft aluminum skin test specimen, drawing 2, sheets 1-4. reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3072 | Custom designed eddy current aircraft calibration standard, Drawing 3, Sheets 1-3, for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 1 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 2 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 3 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3129CS | BOEING ALL AIRCRAFT MODELS 51-00-17 PT 6 FIG 3. MULTIHOLE STANDARD WITH 11 HOLES SIZES: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.00". EDM NOTCHES: .030 x .030 .005" +/-0.002. MATERIAL: 4340 STEEL. Includes Test Report Traceab... | 1 | |
| AFNDT-3157 | Liquid Penetrant Standard. Meets the ASME Boiler Pressure Code, Section V & III, and MIL-I-23135-C. The cracked aluminum block is made from 2024 aluminum and is 3” x 2” x 3/8” thick. A 1/8" wide groove separates the blocks two sides to facilitate side-... | 1 | |
| AFNDT-3164AL | Custom NDI standard for F-15C/D inspection. Material: 2124-T8 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3252AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3252CS | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 4340 or 4130 Carbon Steel.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and | 1 | |
| AFNDT-3252TI | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 6AL-4V TITANIUM. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3291AL | BOMBARDIER 15 HOLE METRIC REFERENCE STANDARD. CL-215T PART 6 PAGE 8 FIGURE 5 GENERAL. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: 4MM, 5MM, 6MM, 7MM, 8MM, 9MM, 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM, 18MM diameters. Includes 15 Thru EDM Notches 0.040 | 1 | |
| AFNDT-3291CS | BOMBARDIER 15 HOLE METRIC REFERENCE STANDARD. CL-215T PART 6 PAGE 8 FIGURE 5 GENERAL. MATERIAL: 4340 CARBON STEEL. HOLE SIZES: 4MM, 5MM, 6MM, 7MM, 8MM, 9MM, 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM, 18MM diameters. Includes 15 Thru EDM Notches 0.040 | 1 | |
| AFNDT-3305AL | Custom 2 Hole Standard. Material: 7075-T6 Aluminum, Block Size: ..250" x 2.0" x 4.0" . HOLE SIZES:.098" and .188" Diameter with Type A% EDM Notch: .035" x .035" x .004" W ±.001". Includes Test Report and Certificate of Conformance Traceable to NIST. | 1 | |
| AFNDT-3306/2024T3 | EDDY CURRENT SURFACE REFERENCE STANDARD, METRIC NOTCHE SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: 2024-T3 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3306/7075T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, METRIC NOTCHE SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3306/MAG | EDDY CURRENT METRIC SURFACE REFERENCE STANDARD. EDM NOTCH SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: MAGNESIUM ZK60A-T5 PER ASTM-B107. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3307 | Custom 8 Hole Standard Manufactured to the Specifications of ATR Part Number 98S51605001-218, Part 6 51-60-00 Figure 616 Sheet 1. Material: 2024-T3 Aluminum, Block Size: .390" x 4.4" x 4.4"(10mm x 111.8mm x 111.8mm) . HOLE SIZES: 2.5mm and 3.2mm. Include | 1 | |
| AFNDT-3308AL | Eddy Current Calibration Standard 3/8” diameter hole standard. Material: 2024-T3 standard with a .030”x .030" corner notch. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3387AL | 6 Hole Metric reference standard. Material: 7075-T6 Aluminum. Hole Sizes: 20mm, 21mm, 22mm, 23mm, 24mm and 25mm. Corner EDM Notches: 1mm x 1mm x .15mm(.039" x .039" x .006"±.001"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3398AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .020", .030", .040", .050", .060", .070", .080", .090", .100" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3402AL | Metric Aluminum multi-hole reference standard. Contains 11 hole sizes; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, and 20mm hole diameters. EDM notch = 0.5mm x 0.5mm deep corner EDM notch in each of the Countersink Holes, 1mm x 1mm corner | 1 | |
| AFNDT-3402AL-1 | Metric Aluminum multi-hole reference standard. Contains 11 hole sizes; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, and 20mm hole diameters. EDM notch = 0.5mm x 0.5mm deep corner EDM notch in each of the Countersink Holes, 1mm x 1mm corner | 1 | |
| AFNDT-3402TI | Metric Aluminum multi-hole reference standard. Contains 11 hole sizes; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, and 20mm hole diameters. EDM notch = 0.5mm x 0.5mm deep corner EDM notch in each of the Countersink Holes, 1mm x 1mm corner | 1 | |
| AFNDT-3430-1 | CUSTOM METRIC HOLE STANDARD, 2024-T3 or 7075-T6 ALUMINUM 1/2" PLATE. Holes diameters: 4 mm, 5 mm, 6 mm, 7 mm.. 1st row - holes without defects. 2nd row - holes with Corner notch - 0.5 mm. 3d row - holes with Full length thru notch - 0.5 mm depth. 4th row | 1 | |
| AFNDT-3470/17-4 | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCH .020"(0.5mm), (.004"W +/- .002), 17-4PH STEEL. SIZE: 1.0"W x 3.0"L x .25".Includes certification Report Traceable to NIST and Certificate of Conformance(COC). | 1 | |
| AFNDT-3481AL | Metric Aluminum Multi-hole reference standard. Material: 2024-T3 Aluminum. Contains 28 holes; 3.6mm, 4.0mm, 4.4mm, 4.8mm, 5.2mm, 5.6mm, 6.0mm, 6.4mm, 6.8mm, 7.2mm, 7.6mm, 8.0mm, 8.4mm, 8.8mm, 9.2mm, 9.6mm, 10.0mm, 10.4mm, 10.8mm, 11.0mm, 11.4mm, 11.8mm... | 1 | |
| AFNDT-3512AL | MISTRAS 3 HOLE EDDY CURRENT TEST STANDARD, HOLE SIZES: .250", .375", .500" DIAMETERS, EDM CORNER NOTCH: .025" x .025" x .005 ± .002", MID-WALL NOTCH:.080" x .025" DEEP +/-.002" per BSS7048. 1 SURFACE EDM NOTCH .150" LONG x .030" DEEP. ALL NOTCHES TO B... | 1 | |
| AFNDT-VL769-1A | TITANIUM VERTICAL(INBOARD LUG) ULTRASONIC REFERENCE STANDARD(.800"THICK, 3.56" OUTSIDE RADIUS WITH A 1.312" BORE DIAMETER. COPPER BERYLLIUM NON FLANGED BUSHING WITH A 1.128 BORE DIA. ( 2 EACH .100" x .100" CORNER NOTCHES) | 1 | |
| AFNDT-VL769-2A | TITANIUM VERTICAL(INBOARD LUG) ULTRASONIC REFERENCE STANDARD(1.500" THICK, 3.56" OUTSIDE RADIUS WITH A 1.312" BORE DIAMETER. COPPER BERYLLIUM NON FLANGED BUSHING WITH A 1.128 BORE DIA. ( 2 EACH .100" x .100" CORNER NOTCHES) | 1 | |
| AFP-1012 | 10 MHZ .125" dia focused Straight shaft pencil transducer with a .080" Replaceable tip. Standard microdot connector | 1 | |
| AFP-1012/90 | 10 MHZ 90° .125"Ø diameter focused pencil transducer with a .060" Replaceable tip. Standard microdot connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFP-1512 | 15 MHZ .125" dia focused Straight shaft pencil transducer with a .080" Replaceable tip. Standard microdot connector | 1 | |
| AFP-1512/90 | 15 MHZ 90° SHAFT .125" dia focused pencil transducer with a .060" Replaceable tip. Standard microdot connector | 1 | |
| AFP-7512 | 7.5MHZ .125" dia. High Resolution focused Straight shaft pencil transducer with a .080" Replaceable tip. Standard microdot connector. ( K-PEN style ) | 1 | |
| AFP-7512/90 | 7.5MHZ 90° angle head. High Resolution .125" dia focused pencil transducer with a .080" Replaceable tip. Standard microdot connector. K-PEN Style | 1 | |
| AFS-0524 | 5 MHz shear wave transducer .25" x .25" square element. 1.025 radius top mount connector. used with NDT3238 ref. standard | 1 | |
| AFS-0539 | Custom 5MHz 45 degree shearweave ring transducer which features both right and left scanning directions. Ref. Standard NDT796 | 1 | |
| AFS-0570-1L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR ( .328" )DIAMETER FASTENER HOLE'S (0.430" ) STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-1R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .328" )DIAMETER FASTENER HOLE'S (0.430" ) STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-2L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.438" & 0.500") DIAMETER FASTENER HOLE'S (0.430" & 0.590") STEPS OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-2R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.438" & 0.500") DIAMETER FASTENER HOLE'S (0.430" & 0.590") STEPS OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-3L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.642") DIAMETER FASTENER HOLE IN (0.570") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-3R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.642") DIAMETER FASTENER HOLE IN (0.570") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-4L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.438") DIAMETER FASTENER HOLE (0.710") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-4R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.438") DIAMETER FASTENER HOLE (0.710") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-5L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.625") DIAMETER FASTENER HOLE IN (0.850") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-5R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.625") DIAMETER FASTENER HOLE IN (0.850") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0572-1L | CUSTOM 45° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.340" ) STEP OF REFERENCE STANDARD NDT6091. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-1R | CUSTOM 45° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.340" ) STEP OF REFERENCE STANDARD NDT6091. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-2L | CUSTOM 50° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.240" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-2R | CUSTOM 50° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.240" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-3L | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-3R | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-4L | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .412" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-4R | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .412" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1032SS | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 45 degree shearwave in Steel, Side Microdot Connector. | 1 | |
| AFS-1033SS | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 60 degree shearwave in Steel, Side Microdot Connector. | 1 | |
| AFS-1034SS | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 70 degree shearwave in Steel, Side Microdot Connector. | 1 | |
| AFS-1160 | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 45 degree shearwave in Aluminum, Right Angle Microdot Connector. | 1 | |
| AFS-1161 | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 60 degree shearwave in Aluminum, Right Angle Microdot Connector. | 1 | |
| AFS-1175 | 70°. ANGLE BEAM TRANSDUCER in ALUMINUM, SIDE MOUNT MICRODOT CONNECTOR, .187" x .187" ELEMENT. CASE SIZE: .67'L x .26"W x .33"H. Includes Test Report and Certificate of Conformance. Reference: B767 Part 4 53-50-05. Standard Part number NDT679 | 1 | |
| AFS-1175T | 70°. ANGLE BEAM TRANSDUCER in ALUMINUM, .187" x .187" ELEMENT, TOP MOUNTED MICRODOT CONNECTOR. CASE SIZE: .67'L x .26"W x .33"H. Includes Test Report and Certificate of Conformance. Reference: B767 Part 4 53-50-05. Standard Part number NDT679 | 1 | |
| AFS-1225S | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 60 degree shearwave in Aluminum, Right Angle Microdot Connector. | 1 | |
| AFS-1225T | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 60 degree shearwave in Aluminum, Top Microdot Connector. Case Size: .375"L x .425"H x .325"W | 1 | |
| AFS-1346 | CUSTOM 2 ELEMENT RING TRANSDUCER FOR BORE HOLE INSPECTION WITH BOEING REFERENCE STANDARD 55-10-13 PAGE 9 FIGURE 2. TWO MICRODOT CONNECTORS "A" and "B" | 1 | |
| AFS-1394 | CARGOLUX CUSTOM 5MHz .187", 40° IN ALUMINUM SHEAR WAVE TRANSDUCER WITH A 1.00" RADIUS FOR THE BOEING REFERENCE STANDARD LUG 1B7- FITTING-SEQUENCE CARRIAGE ATTACHMENT INBOARD TRAILING EDGE FLAP. CASE SIZE: .500"L x .270"W x .350". Includes Test Report... | 1 | |
| AFS-2034SS | Sub Miniature Integral Angle Beam Transducers, Standard Series, 2.25 MHz, 0.120 inch x 0.250 inch; 70 degree shear in Steel, Right microdot Connector | 1 | |
| AFS-5825 | Custom 5MHz 22° shear wave transducer .375" element. 1.90"(51mm) radius. Case Size: .75"L x .50"W x .25"H. Used with reference standard NDT3195. | 1 | |
| AFS-5826 | Custpm 5MHz 31° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3196. | 1 | |
| AFS-5827 | Custpm 5MHz 33° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3197. | 1 | |
| AFS-5828 | Custpm 5MHz 26° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3197. | 1 | |
| AFW-45/1.83R | 45° IN ALUMINUM LUCITE (PLEXIGLASS) WEDGE, 3/8-32 THREAD WITH A 1.83" RADIUS USED WITH A .25"Ø DIAMETER TRANSDUCER AFC-0520(ABT-0504). Includes Certificate of Conformance...Used with Fairchild Reference Standard part number 27-95031-001. | 1 | |
| AGE-00217-801 | CONTROL STAND MICROSWITCH TEST SET | 1 | |
| AGE-00552-401 | CONTROL STAND | 5 | |
| AGE-00708-401 | HOLDER - CONTROL STAND | 6 | |
| AGE-00852-403 | STAND,STABILIZING,CENTRAL FUSELAGE | 3 | |
| AGE-01824-401 | APU TRANSIT STAND | 1 | |
| AGE-04248-401 | TEST SET - CONTROL STAND MICROSWITCHES | 1 | |
| AGE-04268-401 | TEST SET - CONTROL STAND MICROSWITCHES | 2 | |
| AGE-04900-401 | EDDY CURRENT INSTRUMENT - IMPEDANCEPLANE DISPLAY OR SIMILAR REFERENCE STANDARD, NDI, ALUMINUM7050-T7451 | 4 | |
| AGE00708-401 | HOLDER CONTROL STAND | 6 | |
| AGEâ?00552â?401 | CONTROL STAND MOCROWITCH TEST SET | 5 | |
| AGSE -EO82- 008 | ENGINE STAND TRENT 700 | 1 | |
| AGSE- E079-G02 / AGSE-E082-G09 | TRENT 700 ENGINE TRANSPORTATION STAND AND CRADLE | 1 | |
| AGSE-E0075 | TROLLEY -T700 ENGINE MULTI-PURPOSE STAND | 1 | |
| AGSE-E0079 | TROLLEY -T700 ENGINE MULTI-PURPOSE STAND | 1 | |
| AGSE-E074 | MULTI-PUROSE STAND - TRENT 500 / 700 ADAPTABLE | 2 | |
| AGSE-E075 | Trent 500 Truck Stand | 1 | |
| AGSE-E075-G02 | TRENT700 CREDLE AND ENGINE STAND | 1 | |
| AGSE-E079 | Trent 500 Air/Truck Stand | 1 | |
| AGSE-E079-G02 | RR TRENT 500 AIRFREIGHT STAND BASE | 2 | |
| AGSE-E082 | MULTI-PUROSE STAND - AIR & TRUCK | 1 | |
| AGSE-E082-G01 | ENGINE STAND TRENT 500 | 1 | |
| AGSE-E082-G03 | ENGINE STAND TRENT 500 | 1 | |
| AGSE-E082-G07 | TRENT700 CREDLE AND ENGINE STAND | 1 | |
| AGSE-E082-G08 | STAND FOR TRENT 700 ENGINE | 1 | |
| AGSE-E082-G09 | TRENT 700 ENGINE TRANSPORTATION STAND AND CRADLE | 2 | |
| AGSE-E262-G01 | ENGINE TRANSPORTATION STAND PW1130G | 1 | |
| AGSE-E262-G02 | TRANSPORTATION STAND FOR PW1100G & PW1400G ENGINES | 1 | |
| AGSE-E262-G03 | ENGINE TRANSPORT STAND | 1 | |
| AGSE-E277-G01 | STAND TRANSPORT | 1 | |
| AGSEE074 | STAND-TRANSPORTATION | 2 | |
| AGSEE143G01 | ENGINE TRANSPORTATION STAND | 1 | |
| AH1100/11A-AF1 | ULTRA STABLE CAPACITANCE STANDARD | 1 | |
| AHS29-C2-A1 | CUSTOM 29 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM WITH 0.015" THRU EDM NOTCH AND 0.030X0.030 CORNER NOTCH. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AJ65B08027 | WORK STAND - CARRIAGE ASSEMBLY, OUTBOARD TRAILING EDGE FLAP | 1 | |
| AJ65B08027 | WORK STAND - CARRIAGE ASSEMBLY, OUTBOARD TRAILING EDGE FLAP | 1 | |
| AJ65B10187 | WORK STAND - INBOARD TRAILING EDGE FLAP CARRIAGE ASSEMBLY | 1 | |
| AJ65B82640-1 | ASSEMBLY JIG - MICROSWITCH ASSY., THROTTLE CONTROL STAND | 1 | |
| AL29-32 | CALIBRATION REFERENCE STANDARD, BLOCK, 2024-T3 ALUMINUM ALLOY, CONDUCTIVITY BETWEEN 29% AND 32% IACS, CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP SURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ OR EQUIVALENT) | 6 | |
| AL35-45 | CALIBRATION REFERENCE STANDARD (CRS), BLOCK, ALUMINUM ALLOY, WITH CONDUCTIVITY BETWEEN 35% AND 45% IACS (20.3 MS/M TO 26.1 MS/M), THAT CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED NOTCHES, ( | 8 | |
| ALT71000006 | STAND - TRANSPORT | 1 | |
| AM-1928-155 | STAND-ENGINE TRANSPORT | 5 | |
| AM-2228-A1 | V2500 TRANSPORTATION STAND | 2 | |
| AM-2228-A1/B1 | TRANSPORT STAND, V25 | 3 | |
| AM-2228-B1 | TRANSPORT STAND, V2500-A1/A5 | 1 | |
| AM-22281/B1 | Engine Transport Stand | 1 | |
| AM-237106-P07 | AGSE, PW4158 ENGINE STAND BOOTSTRAP ADAPTERS FORB747/767 | 1 | |
| AM-2372 | STAND-ENGINE TRANSPORT TO SUPPORT PW4062. | 3 | |
| AM-2372R-400 | STAND ENGINE TRANSPORT | 1 | |
| AM-2387/2563 | Bootstrap Capable Engine Shipping Stand *OEM APPROVED* | 1 | |
| AM-2563-200 | ENG TRANS STAND BASE | 9 | |
| AM-2563-227 | CFM56 TRANSPORT STAND BASE | 7 | |
| AM-2700 | TRANSPORTATION STAND FOR PW4168 ENGINE | 1 | |
| AM-2701 | TRANSPORTATION STAND FOR PW4168 ENGINE | 2 | |
| AM-2809 | Trent 800 Truck Stand- Top Level | 1 | |
| AM-2809-3400 | TRENT 800 ENGINE STAND | 1 | |
| AM-2811-4800 | CFM56-7B TRANSPORTATION STAND (BASE + CRADLE) | 9 | |
| AM1928-156 | CF6-80C2B/F ENGINE TRANSPORTATION STAND, WITH FITTINGS FOR BOOTSTRAP | 7 | |
| AM2398 | lightweight transport stand | 1 | |
| AM2563 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (AGSE) | 2 | |
| AM2563-200 | -5C TRANS STAND BASE | 9 | |
| AM2563-227 | CFM56-7B TRANSPORTATION STAND (BASE + CRADLE) | 7 | |
| AM27118 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (AGSE) | 1 | |
| AM2809-3400 | ENGINE TRANSPORT STAND -TRENT 800 | 1 | |
| AMS2630C Custom | Custom Reference Standard Per SAE AMS2630C. material: Titanium Alloy, Ti6Al4V per AMS-4928R Annealed. Includes 2 EDM Flaws per customer supplied Drawing. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AN670-55-31-102 | CALIBRATION REFERENCE STANDARD (CRS), MADE OF ALUMINUM WITH MULTIPLE LAYERS CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| AN670-55-31-110 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| APB-NDT001 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-02 Page 6 Frigure 2. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes | 1 | |
| APB-NDT003 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-02 Page 9-10 Figure 5. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Include | 1 | |
| APB-NDT004 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-01 Page 5-6 Figure 2. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Include | 1 | |
| APB-NDT005 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-02 Page 13-14. Figure 7. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Inclu | 1 | |
| APB-NDT006 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-53 Page 5-6 Figure 2. Material: 7075-T7 (40-44% IACS), 2324-T3 (29.5-33.5% IACS), and 2224-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Inclu | 2 | |
| APB-NDT007 | BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 7-8 Figure 2. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | 1 | |
| APB-NDT008 | BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 1-2 Figure 4. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | 1 | |
| APB-NDT009 | BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 5-6 Figure 6.Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certif | 1 | |
| APB-NDT010 | BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 8-9 Figure 8. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | 1 | |
| APB-NDT011A | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 8-9 Figure 3. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT011B | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 11-12 Figure 5. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT011C | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 14-15 Figure 7. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT011D | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 17-18 Figure 9. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT015 | BOEING AVIATION PARTNERS REFERENCE STANDARD 767 Part 6 57-20-09 Page 21-22 Figure 10. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Ce | 1 | |
| APB-NDT016 | BOEING AVIATION PARTNERS REFERENCE STANDARD 767 Part 6 57-50-09 Page 24-25. Figure 12 Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Ce | 1 | |
| APB-NDT3301 | AVIATION PARTNERS BOEING REFERENCE STANDARD 737 Part 6 57-20-34 Page 7-8 Figure 2. Material: 2024-T3 (28.5-32% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5203 | AVIATION PARTNERS REFERENCE STANDARD 737 Part 6 57-20-02 Page 7-8 Figure 2. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate | 2 | |
| APB-NDT5204 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-02 Page 11-12 Figure 4. Material: 2224-T3 and 2324-T3 or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 2 | |
| APB-NDT5205 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-02 Page 15-16 Figure 6. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Cer | 2 | |
| APB-NDT5206 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 8-9 Figure 2. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | 2 | |
| APB-NDT5207 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 12-13 Figure 4. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Cer | 2 | |
| APB-NDT5208 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 16-17 Figure 6. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Cer | 2 | |
| APB-NDT5301 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 15-16 Figure 6. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5302 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 11-12 Figure 4. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5303 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 7-8 Figure 2. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APM452ID-A | WINCH STRAP WITH HOOK (STANDARD LENGTH158 ”) | 1 | |
| APS2300 APU STAND | APS2300 APU TRANSPORTATION STAND | 1 | |
| APS2300 T | TRANSPORT STAND | 1 | |
| ARP-.385/.720 | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-5KHz.385"Ø ID .720"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. FOR REFERENCE STANDARD APB-3302. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.75-1.25/300Hz | REFLECTION RING PROBE, 1.25"OD .75" ID(19.6mm) TRIAX FISHER CONNECTOR 300HZ-1KHZ. REFERENCE STANDARD NDT3176-X 737 PT 6 57-10-59, 737 PART 6 57-10-53 NDT3168. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.85/1.40-200Hz | LOW FREQUENCY REFLECTION RING PROBE .85" I.D. 1.40" O.D. TRIAX CONNECTOR 100Hz-500Hz. REFERENCE STANDARD NDT3176-X 737 PT 6 57-10-59. Includes test report and Certificate of Conformance. | 1 | |
| ARP-1.2/100H-7 | LOW FREQUENCY REFLECTION RING PROBE 1.2" OD, .605" ID, 50Hz-3KHz TRIAX FISHER CONNECTOR. 737 PART 6 57-10-58, pg.2. and 737 PART 6 57-10-54, pg.2 USED WITH NDT3153-X AND 3167-X SERIES REFERENCE STANDARDS. Includes Test Report and Certificate of ... | 1 | |
| ARP-1.25-.75-300H | REFLECTION RING PROBE TRIAX FISHER CONNECTOR, 1.25"OD .75" ID(19.6mm) 300HZ-1KHZ. 737 PART 6 57-10-53, pg.2, USED WITH REFERENCE STANDARD NDT3168 AND NDT3176-X. Includes test report and Certificate of Conformance... | 1 | |
| ARP-1.40/.85-200Hz | LOW FREQUENCY REFLECTION RING PROBE .85" I.D. 1.40" O.D. TRIAX FISCHER CONNECTOR 100Hz-500Hz. REFERENCE STANDARD NDT3176-X 737 PT 6 57-10-59. Includes test report and Certificate of Conformance. | 1 | |
| ARS-1S | Surface reference standard, 4340 or 4130 steel, with EDM notch depth of 0.010" x .005" wide Reference standard overall dImensions 1.0" X 3.0" X 0.25" inches .007" W MAX. Includes Certification traceable to NIST. | 1 | |
| AS56-3 | CFM 56-3 transport'n/installation stand | 1 | |
| ASDP-.25/2-200K | STANDARD REFLECTION SPOT PROBE. 0.25 IN. (6.3MM). 2-200KHz SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.25/TF/1-100K | STANDARD SIDE MOUNT REFLECTION SPOT PROBE. 0.25 IN. (6.3MM). 1Kz-100KHz. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.31/TF | STANDARD REFLECTION SPOT PROBE(STRAIGHT). 0.31"Ø (7.9MM) DIAMETER. 1KHz-50KHz. SUPPLIED WITH A TRIAX FISCHER / LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.45/1KHZ | SURFACE SPOT PROBE, STANDARD BRIDGE .45"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 1KHZ -5KHZ. Includes Test Report and Certificate of conformance. | 1 | |
| ASDP-.5/400HZ-30K | SURFACE SPOT PROBE, STANDARD BRIDGE .500"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 400Hz-30KHz. Includes Test Report and Certificate of conformance. 9213548 | 1 | |
| ASDP-.55/500HZ | SURFACE SPOT PROBE, STANDARD BRIDGE .55"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 500Hz-5KHz. Includes Test Report and Certificate of conformance. | 1 | |
| ASDP-.620 | SURFACE PROBE STANDARD BRIDGE .620" DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 300Hz-10KHz. Includes Test Report and Certificate of conformance. Olympus P/N: 9213011 | 1 | |
| ASDP-1.0/300HZ | SURFACE SPOT PROBE, STANDARD BRIDGE 1.0"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 300HZ. Includes Test Report and Certificate of conformance. | 1 | |
| ASGHU55280HU55281 | TRENT 700 ENGINE SHIPPING STAND - COMPLETE | 1 | |
| ASGHU55324-6-STD | TRENT 800 ENGINE STAND - COMPLETE | 1 | |
| AT55729 | Vertical dressing stand used for testing electrical and bonding | 1 | |
| ATR-3080 | WYVERN MODEL ATR 3080 PISTON ENGINE ALTERNATOR AND STARTER MOTOR TEST STAND | 1 | |
| ATR3080 | ALTERNATOR & STRTER TEST STAND LYCOMING ENGINE | 1 | |
| ATR42V100A | ATR 42&72 DIGITAL AIR/HYDRAULIC TOOL KIT (Standard MILH5606) | 5 | |
| ATRSH21 | STAND PROPELLER N/P ATRSH21 PESO:190KS S/N 105028-01 | 2 | |
| ATRSM20 | ATR72-600 ENGINE STAND | 6 | |
| ATR 3080 | ATR 3080 ALTERNATOR & STARTER TEST STAND | 1 | |
| B-1 | TRANSIENT TAIL MAINTENANCE STAND | 6 | |
| B-300 | TRACTOR - TOW - 25,000 LB DPB - PERKINS T4.236 STANDARD DIESEL ENGINE | 1 | |
| B-500 | TRACTOR - TOW - 40,000 LB DBP - DETROIT DIESEL - STANDARD ENGINE | 1 | |
| B105-005 | BUBBLE COVER, STANDARD MODEL (with Wire Strike) | 1 | |
| B105-800 | TRAVEL COVER, Light Weight Travel Bubble Cover, STANDARD MODEL | 1 | |
| B105-810 | TRAVEL COVER, Light Weight Travel Bubble Cover, STANDARD MODEL (with Wire Strike) | 1 | |
| B49002 | STAND-AUX. PWR UNIT, MAINT. & TRANS. | 1 | |
| B49002 REV C | STAND-AUX. PWR UNIT, MAINT. & TRANS. | 1 | |
| B49002-1 | APU STAND TRANSPORT AND MAINTANCE | 1 | |
| B49002-64 | MAINTENANCE/TRANSPORTATION STAND - AUXILIARY POWER UNIT (APU) | 14 | |
| B632P0001101 | MAIN TRANSMISSION STAND | 1 | |
| B71007-83 | Engine Transport Stand RB211 | 1 | |
| B78010-28 | Stand-Functional TE, Locking & Non-Locking TRA | 12 | |
| BAT-VDG17 | V-DrillGuide® - Drill Straight - Every Time! Standard Model - 17 Fractional Sizes | 1 | |
| BH03-1429-7 | STRAIGHT STAND | 1 | |
| BH7475-T7351 | CALIBRATION REFERENCE STANDARD, ALUMINUM ALLOY, CONDUCTIVITY VALUE OF 35% TO 45% IACS THAT CONTAINS VARIOUS HOLE SIZES WITH 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ OR EQUIVALENT) | 4 | |
| C02683A | PAUT ULTRASONIC CALIBRATION STANDARD, HY-100, NICKELPLATED 3.250'' TALL X 1.250" WIDE X 15.50" LONG UT SCANNING SURFACE PHONOGRAPHIC FINISH TO 125 RA | 1 | |
| C02699A | PAUT ULTRASONIC CALIBRATION STANDARD, HY-100, NICKELPLATED 6.250'' TALL X 1.250" WIDE X 24.00" LONG UT SCANNING SURFACE PHONOGRAPHIC FINISH TO 125 RA | 1 | |
| C130-OW-016 | LOCKHEED C-130 CALIBRATION STANDARD FIGURE 9-4 No.1 and No. 4 Truss Mount Upper Lugs. Material: 7075-T6 Aluminum Sulfuric Acid Anodized Per MIL-A-8625 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| C16221GDO4 | INTEGRATED STANDBY INSTRUMENT | 1 | |
| C16769KA01 | INSTRUMENT STANDBY | 1 | |
| C21013-1 | TEST EQUIPMENT - STANDBY TEMPERATURE CONTROL VALVE (STCV) | 2 | |
| C32004-43 | STAND-OFF ELECTRICAL | 1 | |
| C642G3006101 | TRH SUPPORT STAND | 1 | |
| C71008-1 | CFD Transportation Stand CFM56-3 | 1 | |
| C75002-26 | HAND TOOL SET- CONTROL STAND, DISASSEMBLY/ASSEMBLY | 1 | |
| C76002 | HAND TOOL SET-CONTROL STAND,DISASSEMBLY/ASSEMBLY | 1 | |
| C76002-1 | UNIT CONTROLSTANDEFIS DISMANTLE/ASSEMBLE | 3 | |
| C76002-14 | Control Stand Equipment (6ea/kit) | 1 | |
| C76002-20 | Control Stand Equipment | 4 | |
| C76002-24 | Hand Tool Set - Control Stand, Disassembly/Assembly | 6 | |
| C76002-25 | Hand Tool Set - Control Stand, Disassembly/Assembly | 6 | |
| C76002-26 | Hand Tool Set - Control Stand, Disassembly/Assembly | 13 | |
| C76002-35 | HAND TOOL SET - CONTROL STAND, DISASSEMBLY/ASSEMBLY | 1 | |
| C78011-78 | HYD STAND-TR | 9 | |
| CASE-10064-X600 | STANDARD RUGGED TRANSPORT CASE FOR THE 600 SERIES FLAW DETECTORS | 1 | |
| CDP502F | FLOOR STANDING INDUSTRIAL DRILL PRESS | 1 | |
| CE1617528 | CALIBRATION STANDARD, BOMBARDIER TEST REFERENCE ULTRA SONIC NDI. MATERIAL: 7475-T7351 and 7040-T7451 ALUMINUM. MS90254U0805D FASTENERS. Includes Test Report and Certificate of Conformance. | 1 | |
| CE1617529 | CALIBRATION STANDARD, BOMBARDIER TEST REFERENCE ULTRA SONIC NDI. MATERIAL: 7475-T7351 and 7040-T7451 ALUMINUM. MS90254U0805D FASTENERS. Includes Test Report and Certificate of Conformance. | 1 | |
| CES757 | CARGO ENTRY STAND 757 | 1 | |
| CF34-3 TRANSPORTATION STAND | CF34-3 TRANSPORTATION STAND | 1 | |
| CF6-80 C2 STAND | CF6-80 C2 STAND WITH BOOTSTRAP CAPABILITY | 6 | |
| CF6-80 ENGINE STAND | ENGINE TRANSPORT STANDS CF-80 | 1 | |
| CF6-80 Engine Stand | Engine transport Stands CF-80 | 1 | |
| CF6-80E ENGINE STAND | ENGINE TRANSPORT STANDS CF-80E | 1 | |
| CFM-110 | QEC OFF-LINK ENGINE SHIPPER/TRANSPORT, LONG-TERM STORAGE COVER "BAG" or "ENVELOPE", CFM-56-5A/5B w/ Exhaust Cone, Fully enclosed under belly, Stanley Stand P/N: 150502-2 | 1 | |
| CFM56 BUCK STAND ENGINE STAND | ENGINE REMOVAL AND TRANSPORT STAND | 1 | |
| CFM56-3 ENGINE STAND | CFM56-3 ENGINE STAND FOR SHIPPING / TRANSPORTATION | 10 | |
| CFM56-5A/B | CFM56-5A TROLLEY & CRADLE ASSY (ENGINE STAND) | 2 | |
| CFM56-5A/B/C | ENGINE TRANSPORTATION STAND | 1 | |
| CFM56-5B ENGINE STAND | CFM56-5B ENGINE STAND (TRANSPORTATION) | 5 | |
| CFM56-7B ENGINE STAND | CFM56-7B ENGINE TRANSPORTATION STAND | 3 | |
| CFM56-7B STAND | CFM56-7B TRANSPORTATION STAND | 2 | |
| CFM56-7B Stand | CFM56-7B Transportation Stand & Cradle (NON-OEM) | 2 | |
| CFM56-7B TRANSPORT STAND | TRANSPORTATION STAND | 1 | |
| CFM56-7BE LPT MODULE STAND | CFM56-7BE LPT MODULE STAND FOR TRANSPORTATIONSTORAGE | 1 | |
| CFM56-7BSTAND | CFM56-7B TRANSPORTATION STAND | 2 | |
| CFM56ENGINE DROP STAND/TRANSPO | A320 ENGINE DROP STAND/TRANSPORTATION STAND CFM 56 | 1 | |
| COUPON 12 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-3. 05-30-10 PG.193. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 2 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-4. 05-30-10 PG.190. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 25 | PEMCO LOW FREQUENCY EDDY CURRENT STANDARD FOR INSPECTION UJ-1. 05-30-10 PAGE 194. EDM NOTCH: .030 MAX WIDTH x .240" LONG. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 29 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-3 and ED-4. 05-30-10 PG.195. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 3 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-3. 05-30-10 PG.191. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 31 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-5. 05-30-10 PG.196. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 6 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-5. 05-30-10 PG.192. Includes Certification Report Tracable to NIST. | 1 | |
| CP 30609 | SLING - ENGINE AND TRANSIT STAND | 1 | |
| CP12611/2 | ENGINE TRANSPORTATION STAND | 1 | |
| CP17050/6A | TURNOVER STAND/PARKING TROLLEY | 1 | |
| CP30000-17 | STAND - MULTIPURPOSE, RB211-524 ENGINE TRANSPORT | 1 | |
| CP30000/14 | STAND - MULTIPURPOSE, ENGINE TRANSPORTATION (RB211-524D4) | 1 | |
| CP30000/17 | STAND - MULTIPURPOSE, RB211-524 ENGINE TRANSPORT | 1 | |
| CP30011 | TRANSPORTATION STAND | 1 | |
| CP30123 | TRANSPORTATION STAND IP COMPRESSOR MODULE 02 | 1 | |
| CP30162 | TRANSIT STAND FOR ENGINE / ECU-ROAD TRANSPORT (HAWK RAF) | 1 | |
| CP30162-3 | ENGINE TRANSPORT STAND | 1 | |
| CP30162/2 | TRANSPORTATION STAND | 1 | |
| CP30162/3 | TRANSPORTATION STAND | 1 | |
| CP30295/9 | TRANSPORTATION STAND WITH COVER HP SYS | 1 | |
| CP30379 | Trunion Mount Build Stand | 1 | |
| CP30402-1 | TRANSPORTATION STAND IP/LP TURBINE 05 MODULE - RB211-535 | 1 | |
| CP30402/1 | TRANSPORTATION STAND IP/LP TURBINE 05 MODULE - RB211-535 | 1 | |
| CP30421-1 | ROTOR SUPPORT - IP COMPRESSOR MODULE TRANSPORTATION STAND | 1 | |
| CP30421/1 | ROTOR SUPPORT - IP COMPRESSOR MODULE TRANSPORTATION STAND | 1 | |
| CP30428-1 | JACK ASSEMBLY - TRANSIT STAND RB211-535 | 1 | |
| CP30428/1 | JACK ASSEMBLY - TRANSIT STAND RB211-535 | 1 | |
| CP30459-1 | TRANSLATING SLEEVE INST/REM STAND | 3 | |
| CP30469 | TRANSPORTATION STAND | 1 | |
| CP30469-2 | TRANSPORTATION STAND CONTAINER FOR HS GEAR BOX | 1 | |
| CP30469/2 | TRANSPORTATION STAND CONTAINER FOR HS GEAR BOX | 1 | |
| CP30473 | GUARD - FRONT ASSY - ENGINE TRANSIT STAND - RB211-535 | 1 | |
| CP30502 | Trunion Mount Build Stand | 1 | |
| CP30503/2 | STAND - ENGINE TRANSPORTATION - RB211-535 ENGINES | 1 | |
| CP30558/1 | TRANSIT STAND ENGINE REMOVAL SLING | 1 | |
| CP30596-2 | ENGINE TRANSPORTATION STAND TAY 620 EN | 1 | |
| CP30596-4 | STAND - ENGINE TRANSPORT TAY | 4 | |
| CP30596-5 | TRANSIT STAND - TAY 610-8 , 611-8 , 620-15 , 650-15 , 651-54 , 611-8C | 1 | |
| CP30596/2 | ENGINE TRANSPORTATION STAND (SUPPLIED WITH RENTAL ENGINE) | 1 | |
| CP30596/4 | ENGINE TRANSIT STAND (SUPPLIED WITH RENTAL ENGINE) | 4 | |
| CP30596/5 | TRANSIT STAND - TAY 610-8 , 611-8 , 620-15 , 650-15 , 651-54 , 611-8C | 1 | |
| CP30599-2 | ENGINE REAR SUPPORT TRANSIT STAND - TAY | 4 | |
| CP30599/2 | ENGINE REAR SUPPORT TRANSIT STAND - TAY | 4 | |
| CP30600- | TRUNNION ASSY TRANSIT STAND - TAY | 1 | |
| CP30600-1 | TRUNNION ASSY TRANSIT STAND | 2 | |
| CP30600-2 | TRUNNION ASSY TRANSIT STAND - TAY | 1 | |
| CP30600/1 | TRUNNION ASSY TRANSIT STAND - TAY | 2 | |
| CP30604 | SLING - TOP FRAME OF TAY TRANSIT STAND - TAY 610-8 , 620-15 | 1 | |
| CP30626 | ADAPTOR SET ENGINE TRANSIT STAND - QECU - TAY 610-8 & 620-15 | 1 | |
| CP30628 | FREIGHT GUARD TRANSIT STAND ENGINE/NOSE COWL/THRUST REVERSER REAR | 1 | |
| CP30728-4 | TRANSPORTATION STAND FOR HP COMPRESSOR MODULE - V2500 | 1 | |
| CP30728/4 | TRANSPORTATION STAND FOR HP COMPRESSOR MODULE - V2500 | 1 | |
| CP30860 | STAND - MULTIPURPOSE, RB211-524 ENGINE TRANSPORT | 1 | |
| CP30860-1 | ENGINE TRANSP. STAND RB211-22-524 | 1 | |
| CP30860-2 | ENGINE TRANSPORTATION STAND (MULTI PURPOSE) - RB211-22-524 | 1 | |
| CP30860/2 | ENGINE TRANSPORTATION STAND (MULTI PURPOSE) - RB211-22-524 | 1 | |
| CP30863 | ENGINE TRANSIT STAND SLING | 2 | |
| CP30867-1 | TRANSIT STAND | 1 | |
| CP30869 | FREIGHT GUARD TRANSIT STAND ENGINE/NOSE COWL/THRUST REVERSER FRONT | 1 | |
| CP30956-4 | STAND - ENGINE TRANSPORTATION TAY | 1 | |
| CP9280-5 | SPEY ENGINE, TRANSPORTATION STAND | 1 | |
| CPSCH2839 | MVP BAG FOR RB211 INTER CASING MODULE IN TRANSPORT STAND CP SCH 2666 | 1 | |
| CT780049 | Bearing Blk, Trunnion, C N A Workstand | 1 | |
| CTR5618-3E | TEST STAND FORACTUATOR ASSY RETRACTION | 1 | |
| CX100-R-SILVER | CX100-R-SILVER;1yr. Renewal Standard Full Maintenance Contract CX100 Existing Equipment | 1 | |
| CX300-R-SILVER | CX300-R-SILVER;1yr. Renewal Standard Full Maintenance Contract CX300 Existing Equipment | 1 | |
| D-5905P | GAUSSMETER (10-0-10) WITH CERTIFICATE TRACEABLE TO NIST STANDARD | 1 | |
| D01-0016 D01 | STAND, MLG MAINTENANCE / TRANSPORTATION | 3 | |
| D01-0016-D01 | STAND,MLG MAINTENANCE / TRANSPORTATION | 3 | |
| D01-0016D01 | STAND,MLG MAINT/TRANSPORT | 3 | |
| D02540K2D1E01B0 | HYDRO Standard B787 Nose Tripod Jack | 2 | |
| D04020K3D1E01B0 | HYDRO Standard B787 Tail Tripod Jack | 2 | |
| D08504K3D1E01B0 | HYDRO Standard A330 /A340-200/-300 Wing Tripod Jack | 2 | |
| D08505K3D1E01B0 | HYDRO Standard B787 Wing Tripod Jack | 2 | |
| D19C004 | CENTRIFUGE TUPE STAND | 1 | |
| D71CRA00004G09 | CFM56-5A TROLLEY & CRADLE ASSY (ENGINE STAND) | 1 | |
| D71CRA00019G01 | ENGINE STAND TRENT700 + CRADLE | 1 | |
| D71STA00004G04 | STAND-ENGINE TRANSPORT | 5 | |
| D71STA00004G05 | Engine StandV2500 & CFM56-5A5B(AIR-Transportable) | 5 | |
| D71STA00005G02 | Engine Transportation Stand CFM56-7 | 1 | |
| D71STA0000G04 | V2500-A5 ENGINE STAND WITH TRANSPORTATION | 1 | |
| D71STA00022G03 | ENGINE STAND-TRANSPORT (NEO) | 1 | |
| D71TRO00005G01 | V2500 TRANSPORTATION STAND | 1 | |
| DAE 3595 | PW127 ENGINE TRANSPORTATION STAND | 1 | |
| DAE3225-01 | CFM56-5A TROLLEY & CRADLE ASSY (ENGINE STAND) | 1 | |
| DAPT60-0081-00 | STAND-BUILD (HORIZONTAL) NOT TRANSPORTABLE | 2 | |
| DAPT60-0165-00 | STAND TRANSPORT/BUILD (1 PROPELLER VERTICAL) | 5 | |
| DAPT65-0050-00 | STAND TRANSPORT/BUILD PORTABLE (HORIZONTAL) | 1 | |
| DCM1511 | ENGINE TRANSPORTATION STAND GE CF34-8E | 1 | |
| DLH-1 | STANDARD DELAY. POLYSTYRENE 1/4 IN. DIAMETER, 10 MICROSECOND DELAY(0.45IN LONG), FITS 0.25 IN. REPLACEABLE DELAY LINE TRANSDUCERS | 1 | |
| DLH-2 | STANDARD DELAY. POLYSTYRENE 1/2 IN. DIAMETER, 11 MICROSECOND DELAY, FITS 0.50 IN. REPLACEABLE DELAY LINE TRANSDUCERS | 1 | |
| DLT.187-P | Persplex(Lucite) Delay Tip(Standoff) for MRD-1501-HR Transducer. | 1 | |
| DMC1264 | KIT, CRIMP TOOL - ELECTRICAL CONNECTOR REF FOUND IN STANDARD WIRE PRACTICES MANUAL (SWPM). (DANIELS MANUFACTURING CORPORATION) | 6 | |
| DT1407K3D1E01B0 | HYDRO Standard A330 / A340-200/-300 Nose Tripod Jack | 2 | |
| DT780066 | Bracket, Trunnion, C N A Work Stand | 1 | |
| DT7830200BA3001 | Trent700 Thrust Reverser Workshop Stand | 1 | |
| E1417-E1417M-16PDF | STANDAR PRACTICE FOR LIQUID PENETRANT TESTING | 1 | |
| E190/CF34-10E | ENGINE TRANSPORTATION STAND FOR CF34-10E ENGINE. | 1 | |
| E2J65089 | STRIP STAND (I.P.& L.P) | 1 | |
| E400089-ENC | CONFIRM FROM NDT FOR STANDARD,ECA PROBE,ECA PROBE P/N E400089 -ENC, 14 CHANNELS, 300 KHZ OF CENTRAL FREQUENCY, 26 MM (1 IN.)OF COVERAGE. ENCODER KIT INCLUDED | 1 | |
| E53-002A | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .031"..Doubler = .040"..Filler = .031"..Stringer = .063" | 1 | |
| E53-002B | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .047"..Doubler = .050"..Filler = .047"..Stringer = .063" | 1 | |
| E53-002C | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .055"..Doubler = .063"..Filler = .055"..Stringer = .063" | 1 | |
| E53-002D | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .071"..Doubler = .080"..Filler = .071"..Stringer = .063" | 1 | |
| E53-002E | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .080"..Doubler = .098"..Filler = .080"..Stringer = .063" | 1 | |
| E53-002F | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .098"..Doubler = .110"..Filler = .098"..Stringer = .063" | 1 | |
| EBTOR-HW-STDW | EBTOR-HW-STDW;STANDARD HW WARRANTY OF 3 YEARS EXTRATED FROM OUR HW PRICE - BTOR | 1 | |
| EBTOR-HW-STDW1 | EBTOR-HW-STDW1;STANDARD HW WARRANTY OF 1 YEAR EXTRATED FROM OUR HW PRICE - BTOR ONLY | 1 | |
| EO13829.001/1 | Aeronautical Engineers Australia Reference Standard Fig.2 Page 5 DOC NO: MMS13829.001/1 and REF EO: EO13829.001/1 | 1 | |
| ES 767 FAS | STAND, ENTRY | 1 | |
| EX601R51093 | Calibration reference standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EX604-60024 | CALIBRATION REFERENCE STANDARD MULTI-LAYERED ALUMINUM ALLOY FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 2 | |
| EX604−60024 | Calibration reference standard multi−layered aluminum alloy fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 2 | |
| EXBC670-59045 | CALIBRATION REFERENCE STANDARD ASSEMBLY ALUMINUM ALLOY CONTAINS 0.250 IN. (6.35 MM) LONG ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59046 | CALIBRATION REFERENCE STANDARD ASSEMBLY ALUMINUM ALLOY CONTAINS 0.250 IN. (6.35 MM) LONG ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59066−001 | CALIBRATION REFERENCE STANDARD CONTAINS 0.250 IN (6.35 MM) LONG0.005 IN. (0.127 MM) WIDE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59089-001 | CALIBRATION REFERENCE STANDARD SIMILAR IN MATERIAL AS THE INSPECTION AREA CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ) | 1 | |
| EXBC670-59089−001 | CALIBRATION REFERENCE STANDARD SIMILAR IN MATERIAL AS THE INSPECTION AREA CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59133 | CALIBRATION REFERENCE STANDARD MADE FROM ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59141 | CALIBRATION REFERENCE STANDARD MULTI LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59142 | CALIBRATION REFERENCE STANDARD MADE FROM ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59143-001 | CALIBRATION REFERENCE STANDARD, ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES. (MHIRJ) | 1 | |
| EXBC670-59145 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59148 | CALIBRATION REFERENCE STANDARD (CRS) MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670-59156 | CALIBRATION REFERENCE STANDARD MADE FROM MULTIPLE ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59157-003 | CALIBRATION REFERENCE STANDARD, MULTIPLE LAYERED FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXBC670-59158 | CALIBRATION REFERENCE STANDARD (CRS) MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.). | 1 | |
| EXBC670-59159 | CALIBRATION REFERENCE STANDARD(CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM)NOTCHES (MHIRJ). | 1 | |
| EXBC670-59160 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERED FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EXBC670-59161 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59162 | CALIBRATION REFERENCE STANDARD, ALUMINUM ALLOY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCH. (MHIRJ OR EQUIVALENT) | 1 | |
| EXBC670-59163 | CALIBRATION REFERENCE STANDARD TITANIUM ALLOY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCH. (BOMBARDIER INC.EQUIVALENT) | 1 | |
| EXBC670-59164 | CALIBRATION REFERENCE STANDARD MULTIPLE LAYERS ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59174 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59176 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59177 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59178 | CALIBRATION REFERENCE STANDARD, MULTIPLE LAYER FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXBC670-59179 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 1 | |
| EXBC670-59180 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59181 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670-59182 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 1 | |
| EXBC670-59183-001 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) TRANSDUCER - ANGLE BEAM, 5.0 MHZ, 0.375 IN. (9.53 MM) H X | 1 | |
| EXBC670-59185 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EXBC670−59044 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59045 | Calibration reference standard assembly aluminum alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59046 | Calibration reference standard assembly aluminum alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59065 | Calibration reference standard assembly aluminum and steel alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier inc.) | 1 | |
| EXBC670−59066−001 | Calibration reference standard contains 0.250 in (6.35 mm) long0.005 in. (0.127 mm) wide electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59068 | Calibration reference standard multiple layered assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59089−001 | Calibration reference standard similar in material as the inspection area containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59094 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59098 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59099 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59101 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59125 | Calibration reference standard assembly contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59133 | Calibration reference standard made from aluminum alloy containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59134 | Calibration reference standard aluminum alloy that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59139−001 | Calibration reference standard made from aluminum alloy that contains electrical discharge machined notches (Bombardier inc.) | 1 | |
| EXBC670−59141 | Calibration reference standard multi layers fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59142 | Calibration Reference Standard made from aluminum alloy containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59143 | Calibration Reference Standard assembly that contains electrical discharge machined notches. (Bombardier Inc.) | 1 | |
| EXBC670−59145 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59148 | Calibration Reference Standard (CRS) multiple layers fastened assembly that contains electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59153 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59154 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59156 | Calibration Reference Standard made from multiple aluminum alloy containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59157 | Calibration reference standard multiple layered fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59158 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | 1 | |
| EXBC670−59159 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | 1 | |
| EXBC670−59161 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59162 | Calibration Reference Standard aluminum alloy that contains electrical discharge machined notch. (Bombardier Inc. or equivalent) | 1 | |
| EXBC670−59163 | Calibration Reference Standard titanium alloy that contains electrical discharge machined notch. (Bombardier Inc. or equivalent) | 1 | |
| EXBC670−59164 | Calibration Reference Standard multiple layers assembly that contains electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59174 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59176 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59177 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59178 | Calibration reference standard multiple layer fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59180 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59181 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBD 400-50040 | CALIBRATION TEST STANDARD FOR ULTRASONIC INSPECTION, P/N EXBD 400-50040 | 1 | |
| EXBD 400−50040 (1) | CALIBRATION TEST STANDARD FOR ULTRASONIC INSPECTION | 1 | |
| EXBD400-50040 | CALIBRATION TEST STANDARD FOR ULTRASONIC INSPECTION (DHC) | 1 | |
| EXBD400-50040-001 | CALIBRATION TEST STANDARD FOR ULTRASONIC INSPECTION | 3 | |
| EXSH670-31001-1 | CALIBRATION REFERENCE STANDARD, STGR15R BUTT JOINT, CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ) | 1 | |
| EXSH670-31001−1 | CALIBRATION REFERENCE STANDARD STGR15R BUTT JOINT CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH670-31002-1 | CALIBRATION REFERENCE STANDARD STGR1L AND STGR20L BUTT JOINTS CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH670-31011−1 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH670-35910-1 | CALIBRATION REFERENCE STANDARD, ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES | 1 | |
| EXSH670-35910−1 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES | 1 | |
| EXSH670−31001−1 | Calibration reference standard STGR15R butt joint contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH670−31002−1 | Calibration reference standard STGR1L and STGR20L butt joints contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH670−31011−1 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH670−31014−1 | Calibration reference standard pressure bulkhead machined frames FS693.00 and FS847.00 contains subsurface electrical discharge machined notches. (Bombardier Inc.) | 1 | |
| EXSH670−35910−1 | Calibration Reference Standard assembly that contains electrical discharge machined notches | 1 | |
| EXSH690-31003−11 | CALIBRATION REFERENCE STANDARD EMERGENCY EXIT DOOR SURROUND STRUCTURE CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH690-31023-1 | CALIBRATION REFERENCE STANDARD, CIRCUMFERENTIAL SKIN JOINT STGR7 TEST PIECE, CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXSH690-31023−1 | CALIBRATION REFERENCE STANDARD CIRCUMFERENTIAL SKIN JOINT STGR7 TEST PIECE CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH690−31003−11 | Calibration reference standard emergency exit door surround structure contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH690−31023−1 | Calibration reference standard circumferential skin joint STGR7 test piece contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| F70207-109 | DOWEL SET - THRUST LEVER, CONTROL STAND | 26 | |
| F70249 | APU ADAPTER STAND AND TRANS. CART THE F70249-1 | 1 | |
| F70330-1 | -4 BALANCE JIG STAND - CONTROL SURFACES | 5 | |
| F70330-1 -4 | BALANCE JIG STAND - CONTROL SURFACES | 2 | |
| F70330-14 | BALANCE JIG STAND - CONTROL SURFACES | 2 | |
| F70330-4 | BALANCE JIG STAND - CONTROL SURFACES | 12 | |
| F71292-17 | PROTRACTOR STAND | 8 | |
| F72950-1 | STAND - APU TRANSPORT. B727 | 2 | |
| F80135-10 | CABLE FOR STANDBY SYST. ELECTRIC MOTOR PUMPS | 4 | |
| F80195-1 | Dowel Set - Thrust Lever Control Stand | 14 | |
| FAM5E | 3/8" DRIVE METRIC 5MM STANDARD HEX BIT SOCKET DRIV | 1 | |
| FB70-010-1B | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (FRANK BROWN) | 3 | |
| FB70-077-200 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (FRANK BROWN) | 7 | |
| FB70000-1 | CFM56-3 ENGINE STAND TRANSPORTATION DOLLY | 4 | |
| FB70000-1-FB70077-200 | CFM56-3 ENGINE STAND TRANSPORTATION DOLLY | 1 | |
| FB70000-2 | COM-4954 Stand - Transportation, Engine, CFM56-7 Part #: FB70077-200 | 4 | |
| FB70010-1V250 | STAND, ENGINE TRANSP | 4 | |
| FB70010-2V250 | STAND TRANSPORT & SHIPPING | 5 | |
| FB70020-200 | TOOL: STAND,TRANSPORT SHPG | 3 | |
| FB70023-1 | 90"RAIL SHOCK MOUNTED TRANSP.STAND C/W | 3 | |
| FB7007-200 | UNIVERSAL LOW PROFILE TRANS/SHIPPING STAND CFM56-3/5A/5B/7/7B ENGINES | 1 | |
| FB70077-100ISSB | CFM56-7B TRANSPORTATION STAND | 3 | |
| FB70077-200 | STAND TRANSPORT & SHIPPING | 7 | |
| FB70077-200-S | UNIVERSAL TRANS/SHIP STAND STACKING | 1 | |
| FC-TS-1 | Tree Stand for FC-C915-1 and -2 | 1 | |
| FC-TS-2 | Tree Stand for FC-C1530-1 and -2 | 1 | |
| FDI-C7009 | FLOW TRANSFER STANDARD | 1 | |
| FEN06 | STANDARD TRIPOD-JACK SET A320 FAMILY INCL. NEO - TAIL | 1 | |
| FEN06A21 | HYDRO Standard A320 Family Tail Tripod Jack | 2 | |
| FEN10 | STANDARD TRIPOD-JACK SET A320 FAMILY INCL. NEO - NOSE | 1 | |
| FEN10A21 | HYDRO Standard A320 Family Nose Tripod Jack | 2 | |
| FEN121 | STANDARD B737 TAIL TRIPOD JACK | 1 | |
| FEN121A2 | HYDRO STANDARD B737 TAIL TRIPOD JACK | 1 | |
| FEN121A21 | HYDRO Standard B737 Tail Tripod Jack | 2 | |
| FEN122A21 | HYDRO Standard B737 Nose Tripod Jack | 2 | |
| FEN351 | STANDARD TRIPOD-JACK SET A320 FAMILY INCL. NEO - WING | 1 | |
| FEN351A21 | HYDRO Standard A320 Family Wing Tripod Jack | 2 | |
| FEN352A21 | HYDRO Standard B737 Wing Tripod Jack | 2 | |
| FME5-71799 | Balance Jig Stand -Control Surfaces | 1 | |
| FME65B80713-1 | STAND – ASSEMBLY, HORIZ STAB TRIM ACTUATOR, FORKLIFTABLE | 3 | |
| FRDH141 | ATR STANDARD TORQUE ADAPTER | 12 | |
| FRLKS | STAND AIR CONTROL | 1 | |
| FTH5K-1625M-16-AC-19-S | FTH5K-1625M-16-AC-19-S;Package FTH5K; 1625nm M; 16p LCAPC; AC-Rear Tray; 19in; USB adp; Standalone | 1 | |
| FTH5K-1650M-16-AC-19-S | FTH5K-1650M-16-AC-19-S;Package FTH5K; 1650nm M; 16p LCAPC; AC-Rear Tray; 19in; USB adp; Standalone | 1 | |
| FTR 7060-5 | FUEL INJECTOR TESTER(FUEL CONTROL TESTER STAND) | 1 | |
| FTR-7060-5 | FUEL CONTROL TEST STAND | 1 | |
| FTR08-35-51000 | PROPELLER TRANSPORT STAND / DOLLY | 1 | |
| FTR7060-5 | FUEL CONTROL TESTER STAND | 1 | |
| FULL-STD-1 | FULL-STD-1;1yr. Renewal Standard Full Maintenance Contract Existing Equipment | 1 | |
| FZES3021 | CFM56-5A/5B ENGINE R/I & TRANSPORTATION STAND | 1 | |
| FZES3051 | V2500-A1/A5 ENGINE R / I & TRANSPORTATION STAND (BASE + CRADLE) | 1 | |
| FZES3081 | Trent 500/700 ENGINE STAND BASE (Alternate to AGSE-E079, HU55280-3 / HU55281-4) | 1 | |
| FZES3082 | Trent 700 ENGINE STAND | 1 | |
| FZES3083 | Trent 500 ENGINE STAND | 1 | |
| G01J3P3 | KIT, CRIMP TOOL - ELECTRICAL CONNECTOR REF FOUND IN STANDARD WIRE PRACTICES MANUAL (SWPM) (GRAPHIC DATAKITS INTERNATIONAL (6495 CORP.)) | 1 | |
| G27080-1 | WORKSTAND - CARRIAGE ASSEMBLY, OUTBOARD TRAILING EDGE FLAP | 1 | |
| G27081-1 | WORKSTAND - CARRIAGE ASSEMBLY, INBOARD TRAILING EDGE FLAP | 1 | |
| G4-201 | PITOT COVER SET, heat resistant type (includes 3rd "standby" pitot on left side), equivalent to Gulfstream p/n PC155-89SB (set of 3) | 1 | |
| G600-710004-101 | ENGINE TRANSPORT STAND | 1 | |
| G601-710004-101 | STAND—ENGINE POWER PLANT TRANSPORTATION (932-01) | 1 | |
| G601-710004-161 | Stand - Engine/Power Plant Transportation # 932-01 | 1 | |
| G601710004−161 | Stand, engine/power plant transportation | 1 | |
| G601R-710004-461 | STAND, ENGINE/POWER PLANT TRANSPORTATION | 1 | |
| G704B | G704B CHERRYMAX® POWER RIVETER STANDARD MODEL-RIVETER ONLY ( STROKE: .510" )( PULLING FORCE: 3,100 LBS (1,406 KGS) )( DESCRIPTION: RIVETER ONLY ) | 10 | |
| G76003 | TEST FIXTURE -0 CONTROL STAND MICRO SWITCH PACK | 1 | |
| G76003-1 | TEST FIXTURE - CONTROL STAND MICROSWITCH PACK ASSEMBLY | 1 | |
| G76003-23 | TEST FIXTURE CONTROL STAND SWITCH PACK ASSEMBLY | 1 | |
| G76004 | JIG ASSEMBLY -0 MICROSWITCH, CONTROL STAND | 1 | |
| G76004-1 | JIG ASSEMBLY - MICROSWITCH, CONTROL STAND THROTTLE | 1 | |
| G76005-1 | ASSEMBLY JIG - MICROSWITCH ASSEMBLY, THROTTLE CONTROL STAND | 1 | |
| G76006-1 | MICROSWITCH ASSEMBLY JIG, THROTTLE CONTROL STAND | 1 | |
| G78010-1 | Stand -Transportation/Work. Thrust Reverser. Genx-2B | 1 | |
| G78010-87 | STAND - TRANSPORTATION/WORK, THRUST REVERSER, GEnx-2B | 3 | |
| GA0002859-NH | NITROGEN HOSE 8M WITH STANDARD CONNECTOR | 1 | |
| GE-105 | QEC OFF-LINK SHIPPING/TRANSPORT ENGINE COVER, GE90-115 Propulsor, fully enclosed (Boeing 777). AGSE Stand P/N: 9C6019P0Z | 1 | |
| GM00002378 | TRIPOD LIGHT STAND | 1 | |
| GNSSRK | REPEATER KIT; INCLUDES GA30-V AMPLIFIER MODULE, S440 GNSS ANTENNA, N-JK-G ARRESTER, GRA10-NF INDOOR ANTENNA, LMR/KSR240 L=20MTR (NM-NM) INDOOR CABLE SET, RG8 L=30MTR (NM-TM) OUTDOOR CABLE SET, OUTDOOR ANTENNA MOUNTING STAND AND POWER ADAPTER MANUFACTURER: | 1 | |
| GS12755-3 | TEST STAND OIL TEMPERATURE CONTROL VALVE | 2 | |
| GS20863-1 | STAND, LIQUID NITROGEN CONTAINER | 1 | |
| GS20875-1 | PROPELLER TRANSPORT STAND / DOLLY | 4 | |
| GS23015-1 | STAND-PROPELLER ATR | 5 | |
| GS24067-1 | ULTRASONIC REFERENCE STANDARD | 1 | |
| GSB2840008C | SET - HARNESS ADAPTER Q100, 200, 300, METRIC, STANDARD RANGE | 2 | |
| GSB5411004 | STAND-LOWER FORWARD COWL SUPPORT/TRANSPORT | 1 | |
| GSB6110008 | STAND-PROPELLER TRANSPORT AND BUILD | 2 | |
| GSB6110008-IAS | DHC-8 PROP TRANSPORT/BUILD UP STAND WITH PROP HUB ADAPTOR | 1 | |
| GSB7100019 | STAND-ENGINE TRANSPORT | 1 | |
| GSE7100010 | ENGINE TRANSIT STAND | 1 | |
| GSE7100019 | FRONT TRUNNION FOR ENGINE DRESSING / PARKING STAND | 1 | |
| GSE7120401 | ENGINE TRANSPORTATION STAND | 1 | |
| GSE7120402 | TRANSPORTATION STAND - GUARD RAIL (REAR) | 1 | |
| GSE7120403 | TRANSPORTATION STAND - GUARD RAIL (FRONT) | 1 | |
| GSE7120404 | TRANSPORTATION STAND REAR ADAPTER (LEFT LOWER LUG) | 1 | |
| GSE7120405 | TRANSPORTATION STAND REAR ADAPTER (RIGHT LOWER LUG) | 1 | |
| GSE7120407 | TRANSPORTATION STAND FRONT ADAPTER (TRUNNION) | 1 | |
| GSE7120408 | TRANSPORTATION STAND FRONT ADAPTER (LOWER LUG) | 1 | |
| GST 120-9 | TRIPOD/STAND FOR HORN | 1 | |
| GT110 | TRACTOR - TOW - 72,000 DRAWBAR PULL - 90,000 GVW STANDARD (THE "STANDARD" IS NOT RECOMMENDED) - THE OPTIONAL 78,000 DRAWBAR PULL IS RECOMMENDED - 78,000 DRAW BAR PULL IS AVAILABLE AT 100K, 110K AND 120K GVW. 81.5" CAB HEIGHT | 1 | |
| H1000-116 | PITOT COVERS/AOA STRAP, heat resistant type (includes standby pitot tube) (set of 3) | 1 | |
| H103D29337 | TEST STAND, AIRCRAFT HYD. SYS. ELECTRIC MOTOR DRIVEN (AM27) | 1 | |
| HC130H0268-000 | Stand APU Sundstrand (alternative to HC130H0269-000) | 1 | |
| HC130H0269-000 | Stand APU Mobile (layby) Sundstrand | 1 | |
| HDS 3.5/30-4 | KARCHER STEAM CLEANER - HDS 3.5/30-4 EA STANDARD HOT WATER PRESSURE WASHER, DIESEL/ELECTRIC, 3000 PSI, 3.5 GPM | 1 | |
| HFSTIN-20PC | 20 Piece Hole Finder (Strap Duplicator) Kit! Includes all five sizes in 8-1/2" & 13-1/2" in Standard and Inverted Styles! | 1 | |
| HIP-E-10SS-2Z-HPU | TEST STAND, HYDRAULIC, PORTABLE ELECTRIC DRIVEN | 1 | |
| HIX 3007-0G | EXTENSION/RETRACTION STAND | 2 | |
| HIX 3007−0G | EXTENSION/RETRACTION STAND | 2 | |
| HIX3001 | WORK STAND TR | 11 | |
| HIX3007 | EXTENSION/RETRACTION STAND- HYDRAULIC ACTUATOR RODX | 12 | |
| HIX3007 REV A | EXTENSION/RETRACTION STAND- HYDRAULIC ACTUATOR ROD | 1 | |
| HLA4424-NM | Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting | 1 | |
| HLA4424-NM-PS | Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting with Safety | 1 | |
| HLA5854-P-D | Inflation Handle with Two Flexible Extensions (One with Standard Fitting and One with High Flow Fitting) in Transport Cases | 1 | |
| HLA5854-PS-GS | Inflation Handle with Two Flexible Extensions (One with Standard Fitting with Safety and One with High Flow Fitting with Safety) in Transport Cases | 1 | |
| HLA6427A-PD | Precision Pressure Controller for Standard Valve (with Case) | 1 | |
| HLA6599 | Digital Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting | 1 | |
| HLA6599-PS | Digital Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting with Safety | 1 | |
| HMGT1A | STAND, STRUT SERVICE | 1 | |
| HPPE303K-S4 | TEST STAND - HYDRAULIC, PORTABLE ELECTRIC DRIVEN, 30 GPM, 3000 PSI. WHEN ORDERING, SUPPLY THE LOCAL ELECTRICAL, HOSE L (AMERICAN LAB & SYSTEMS) | 1 | |
| HPPE503K-S4 | TEST STAND, HYDRAULIC, PORTABLE ELECTRIC DRIVEN | 1 | |
| HS8201 | STAND - CONTROL ASSEMBLY | 1 | |
| HST915180 | STAND, TRANSPORT | 1 | |
| HT2000-1E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 55 kW | 3 | |
| HT2000-1E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 55 kW | 3 | |
| HT2000-1E1S2X350 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 110 kW | 2 | |
| HT2000-1E1SX350 | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 10 m Hose, 380/420 V, 250 A | 5 | |
| HTC12E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTC12E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC12E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC12E1S2HT | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC12E1S2T | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC12E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC12E1SHT | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTC12E1ST | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC30E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 9 m Hose, 380/420 V, 105 A | 2 | |
| HTC30E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 37 kW | 2 | |
| HTC30E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 37 kW | 2 | |
| HTC30E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 37 kW | 2 | |
| HTC3E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC3E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC3E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC3E1S2HT | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC3E1S2T | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC3E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC3E1SHT | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC3E1ST | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC6E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC6E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC6E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC6E1S2HT | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC6E1S2T | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC6E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC6E1SHT | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 16 A | 2 | |
| HTC6E1ST | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 16 A | 2 | |
| HTC8E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTC8E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC8E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC8E1S2HT | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC8E1S2T | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC8E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTC8E1SHT | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTC8E1ST | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTLP-2 | Ullman® All-Angle Magnetic Retrievers (Type: Rotating Head*) (Extension: 6-3/4" to 27-3/4") (Add to cart: Add To Cart) (Type: Standard) (Extension: 8" to 32-3/4") (Add to cart: Add To Cart) | 1 | |
| HTM12E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM12E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM12E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM12E1S2HT | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM12E1S2T | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM12E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTM12E1SHT | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM12E1ST | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM30E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 9 m Hose, 380/420 V, 105 A | 2 | |
| HTM30E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 37 kW | 2 | |
| HTM30E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 37 kW | 2 | |
| HTM30E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 37 kW | 2 | |
| HTM3E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM3E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM3E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM3E1S2HT | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM3E1S2T | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM3E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 16 A | 2 | |
| HTM3E1SHT | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 16 A | 2 | |
| HTM3E1ST | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM6E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 16 A | 2 | |
| HTM6E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM6E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM6E1S2HT | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM6E1S2T | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM6E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 16 A | 2 | |
| HTM6E1SHT | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM6E1ST | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM8E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTM8E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM8E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM8E1S2HT | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM8E1S2T | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM8E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM8E1SHT | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTM8E1ST | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HU28621 | IP/LP Module Transport Stand Ring, bolts to HU28618 | 1 | |
| HU35522 | TRANSPORT STAND | 1 | |
| HU35829-1 | TRANSPORTATION STAND | 1 | |
| HU44932 | SPACER - PACKER TO INCREASE GROUND CLEARANCE ON TRANSPORTATION STAND HU55280-3 | 1 | |
| HU505091-1 | STAND - TRANSIT, FAN DISC AND BLADE ASSEMBLY | 1 | |
| HU55061-2 | BUILD STAND – TRENT 700 | 1 | |
| HU55061-5 | BUILD STAND – TRENT 700 | 1 | |
| HU55083-5 | TRENT 700 IDG STAND | 10 | |
| HU55091-1 | TOOL: STAND TRANSIT FAN | 1 | |
| HU55091-4 | STAND - TRANSIT, FAN DISC AND BLADE ASSY | 1 | |
| HU55106-1 | SLING - POWERPLANT PLUS TRANSPORTATION STAND AND BASE | 7 | |
| HU55118-1 | TRANSPORTATION STAND | 1 | |
| HU55119-1 | TRANSPORTATION STAND | 1 | |
| HU55119-2 | TRANSPORTATION STAND | 1 | |
| HU55119-3 | STAND TRAN | 1 | |
| HU55134-1 | TOOL: STAND-TRANSPORTATION | 1 | |
| HU55280 | STAND ENG TRANSPORTA | 4 | |
| HU55280-2 | TRANSPORTATION STAND | 5 | |
| HU55280-3 | ENGINE STAND TROLLEY T700 | 8 | |
| HU55281-3 | STAND - MULTI PURPOSE TRENT 700 ENG CR | 3 | |
| HU55281-4 | CRADLE- MULTI PURPOSE STAND TRENT 700 | 8 | |
| HU55314 | TOOL: STAND-TRANSPORTATION | 1 | |
| HU55317 | TRANSPORTATION STAND | 1 | |
| HU55323-2 | STAND MULTIPURPOSE, ENGINE TRENT 800 | 1 | |
| HU55323-3 | BASE - MULTIPURPOSE STAND TRENT 800 | 1 | |
| HU55323-4 | BASE - MULTIPURPOSE STAND TRENT 800 | 1 | |
| HU55324-1 | CRADLE - M/PURPOSE STAND ENG. TRENT 80 | 1 | |
| HU55324-3 | CRADLE-MULTIPURPOSE STAND TRENT 800 | 1 | |
| HU55324-6 | STAND - MULTIPURPOSE, ENGINE HANDLING, TRENT 800 ENGINE | 3 | |
| HU55325 | TOWBAR - TRENT 800 M/PURPOSE STAND ENG | 1 | |
| HU55326 | STAND - MULTIPURPOSE, ENGINE HANDLING, TRENT 800 ENGINE | 1 | |
| HU55326-2 | CASTOR ASSY - MULTIPURPOSE STAND TRENT | 1 | |
| HU55331 | STAND - ENGINE, ROAD TRANSPORTATION. FIXED SUSPENSION | 1 | |
| HU55347- | TRANSPORTATION STAND | 1 | |
| HU55347-1 | TRANSPORTATION STAND | 1 | |
| HU55347-3 | STAND TRAN | 1 | |
| HU55366-2 | STAND - ENGINE CHANGE, REMOTE STATION, TRENT 800 ENGINE | 3 | |
| HU55418-2 | TRENT 800 OEM ROLLOVER STAND | 1 | |
| HU55418-5 | T800 ENGINE TRANSPORTATION STAND | 1 | |
| HU55511 | TRENT ROLLOVER STAND AXLE SET | 1 | |
| HU55634-4 | ENGINE STAND FOR TRENT 700 (A330 ENGINE) | 1 | |
| HU55761 | BOOTSTRAP/STAND ADAPTOR A330/A340 | 14 | |
| HU55770 | TOOL: STAND-TRANSPORTATION | 1 | |
| HU55771-1 | TOOL: STAND-TRANSPORTATION | 1 | |
| HU56185 | STAND,TRANSIT FAN ASSEMBLY | 1 | |
| HU56185-3 | STAND,TRANSIT FAN ASSEMBLY | 1 | |
| HU56185-6 | STAND TRANSIT FAN ASSY - T900 | 1 | |
| HU56421 | TOOL: TRANSPORTATION STAND | 1 | |
| HU56427 | PALLET FOR T800 ENGINE TRANS STAND/B747 | 1 | |
| HU56436 | TROLLEY PARKING-BUILD STAND LIFTING BEAM | 1 | |
| HU56436-1 | TROLLEY PARKING-BUILD STAND LIFTING BEAM | 1 | |
| HU87103 | BATI DE TRANSPORT ROUTE,AIR ROAD TRANSPORTATION STAND | 1 | |
| HU87529 | STAND, TRANSPORTATION, LH OR RH TRU | 1 | |
| HU87541 | STAND, TRANSPORTATION, LH OR RH TRU | 1 | |
| HU88000-1 | TRENT FAN COWL STAND | 6 | |
| HU88000‐1 | TRENT FAN COWL STAND | 6 | |
| HU88001 | STAND-PARKING, SHOP TRANSPORT HINGED COWLS | 8 | |
| HW93718 | HYDRAULIC TRANSMISSION JACK (IDG STAND) | 14 | |
| HX0314 | RR TRENT 700 STAND | 1 | |
| IAE1J12019 | STAND - TRANSPORT | 9 | |
| IAE1J12211 | STAND TRANSPORT STORAGE ENGINE ASSY NO1 BRG-LPC STUB SHAFT INTERMEDIATE | 1 | |
| IAE1J12212 | STAND TRANSPORT STORAGE ENGINE ASSY LP TURBINE SHAFT | 1 | |
| IAE1J12410 | STAND TRANS.LPC BAL FIXT. | 1 | |
| IAE1N20005 | DOLLY WORKSTAND TR LH | 9 | |
| IAE1N20006 | DOLLY WORKSTAND TR RH | 8 | |
| IAE1N20007 | RH TR DOLLY-WORKSTAND | 10 | |
| IAE1R19464 | SURGICAL STRIKE STAND | 1 | |
| IAE2R19878 | STAND-ENGINE TRANSPORT | 2 | |
| IAE5R18762 | STAND, TRANSPORT | 1 | |
| IAE5R18926 | STAND-ENGINE TRANSPORT | 1 | |
| IAE6F10000 | STAND - ENGINE TRANSPORT | 1 | |
| IAE6R18889 | STAND-ENGINE TRANSPORT | 1 | |
| IAE6R18897 | STAND-ENGINE TRANSPORT | 1 | |
| IAER18889 | ENGINE TRANSPORTATION STAND | 1 | |
| IAER1889 | STAND-ENGINE TRANSPORT | 1 | |
| ITS-375 | Immersion Transducer, Standard Case, 5MHz, .375" ES, UHF Connector | 1 | |
| J22002-1 | Spline Wrench - Gearbox, Autothrottle Control Stand | 2 | |
| J27157-1 | Flap lever lockout-control stand | 1 | |
| J27157-15 | FLAP LEVER LOCKOUT - CONTROL STAND | 1 | |
| J49007-29 | STAND-TRANSPORTATION, APU | 11 | |
| J4900729 | STAND-TRANSPORTATION,APU | 11 | |
| J4902A | SOCKET SET, HEX BIT, 3/8" DRIVE STANDARD: 1/4", 1/8", 3/16", 3/8", 5/16" 5/32", 7/32", METRIC: 4, 5, 6, 7, 8, 10MM, SOCKET BARS 6-1/4", 9", SOCKET CLIP 3/8" DR, 13 PIECE, MAKE: PROTO | 1 | |
| J71038-1 | STAND - STORAGE, INLET ASSEMBLY, TRENT 800 ENGINE 777-200ER, -300 | 5 | |
| J76001-1 | TEST FIXTURE - THRUST LEVER CONTROL STAND | 1 | |
| J76002-1 | WRENCH - SPANNER, THRUST LEVER CONTROL STAND SHAFT ASSEMBLY | 5 | |
| J78019-1 | STAND-TRANSPORT/WORK | 1 | |
| J78019-72 | TRANSPORTATION/WORK STAND - | 1 | |
| J78019-85 | STAND - TRANSPORTATION/WORK, RR TRENT 800 THRUST REVERSER | 6 | |
| J78023-1 | STAND - TRANSPORT TR | 1 | |
| J78023-102 | STAND - TRANSPORTATION, PW FAN THRUST REVERSER | 2 | |
| J78031 | STAND - TRANSPORTATION/WORK GE90 THRUST REVERSER | 1 | |
| J78031-140 | Stand -transportaion/work GE90 thrust reverser | 3 | |
| J78031-146 | STAND - TRANSPORTATION/WORK, GE90 THRUST REVERSER | 4 | |
| J78031-147 | SPARE PARTS, TRANSPORTATION STAND | 1 | |
| J78031-148 | TRANSPORTATION STAND | 1 | |
| J78031-152 | SPARE APRTS, TRANSPORTATION STAND | 1 | |
| J78031-81 | TRANSPORTATION STAND | 1 | |
| J78031-85 | STAND - TRANSPORTATION/WORK GE90 THRUST REVERSER | 7 | |
| J78032-102 | TRANSPORTATION STAND | 1 | |
| J78038-1 | Transportation/work stand-thrust reverser | 1 | |
| JT8D-17A | ENGINE TRANSPORTATION STAND | 4 | |
| JT8D-200 TRANSPORT STAND | JT8D-200 TRANSPORT STAND | 1 | |
| JXHKGB-1760 | CFM56-7 ENGINE TRANSPORT STAND | 1 | |
| K 780 | K 780;Mains Cable Straight Line UK Standard Plug | 1 | |
| K-2115 | ADAPTER (PT6A - PT6A-28), USE WITH 08-2001-0000 STAND (TRONAIR) | 7 | |
| K12003-1 | FILL TOOL – HYDRAULIC STRUT, SEMI LEVER GEAR STANDARD PRACTICES – AIRFRAME | 4 | |
| K71010-2 | STAND ASSEMBLY - STORAGE, INLET ASSEMBLY, TRENT 1000 | 1 | |
| K71010-88 | STAND ASSEMBLY - STORAGE, INLET ASSEMBLY, TRENT 1000 | 3 | |
| K78008 | STAND-TRANSPORTATION | 1 | |
| K78008-1 | STAND - TRANSPORTATION/WORK GENERAL ELECTRIC GEnx THRUST REVERSER | 7 | |
| K78010 | STAND-TRANSPORTATION | 1 | |
| K78010-72 | TRANSPORTATION/WORK STAND - THRUST REVERSER, ROLLS-ROYCE TRENT 1000 | 5 | |
| KC10-7025-3 ASSEMBLY | CUSTOM MANUFACTURED BOEING REFERENCE STANDARD FOR ULTRASONIC INSPECTION 101/201 | 1 | |
| LCLPD-78-5 | THICKNESS METER CABLE FOR OLYMPUS 38DL PLUS CABLE PART # LCLPD-78-5 – FOR USE WITH MTD705 TRANSDUCER, STANDARD TYPE, DUAL LEMO MOLDED PLUG TO LEPRA/CON. 5 FT. RG178 MAKE: EVIDENT (OLYMPUS) – USA | 1 | |
| LCM-74-3 | THICKNESS METER CABLE FOR OLYMPUS 38DL PLUS CABLE: CABLE PART # LCM-74-3 – FOR USE WITH M1016 TRANSDUCER, STANDARD TYPE, STANDARD LEMO TO MICRODOT. 3 FT. RG-174 MAKE: EVIDENT (OLYMPUS) – USA | 2 | |
| LOT26426 | TRANSPORTATION STAND | 1 | |
| LOT26783 | TRANSPORTATION STAND | 1 | |
| M103-SB | CONTACT TRANSDUCER, 1 MHZ, 0.50" ELEMENT DIAMETER, STANDARD CASE STYLE, STRAIGHT BNC CONNECTOR | 1 | |
| M90 | ULTRASONIC KIT ( TYPE M90) REFLECTROSCOPE WITH STANDARD PULSER/RECEIVER | 1 | |
| MA40-13 | TRACTOR - CARGO - 4000 DRAW BAR PULL - DIESEL POWERED - STANDARD HEIGHT (FOR LOW PROFILE USE M1A SERIES) | 1 | |
| MA40-24 | TRACTOR - CARGO - 4000 DRAW BAR PULL - DIESEL POWERED - STANDARD HEIGHT (FOR LOW PROFILE USE M1A SERIES) | 1 | |
| MC280002-2 | STAND-LOADER-TRANSPORT EQUIPMENT | 1 | |
| MD11-04-210 | McDONNELL DOUGLAS ULTRASONIC REFERENCE STANDARD (MDC-K225) FIGURE 1.29, PG.1 SECTION 2-1. Includes Test Report and Certificate of Conformance. | 1 | |
| MD11-04-325 | McDONNELL DOUGLAS ULTRASONIC REFERENCE STANDARD (MDC-K5225 FIGURE 1.30, PG.1 SECTION 2-1. Includes Test Report and Certificate of Conformance. | 1 | |
| MD11-04-400 | McDONNELL DOUGLAS ULTRASONIC REFERENCE STANDARD (MDC-K225) FIGURE 1.31, PG.1 SECTION 2-1. Includes Test Report and Certificate of Conformance. | 1 | |
| MD11-10 | McDONNELL DOUGLAS ULTRASONIC REFERENCE STANDARD (MDC-K5225 SECTION 2-1 PG.1 FIG.1.23.. 2024-T3 ALUMINUM | 1 | |
| MD11-11 | McDONNELL DOUGLAS ULTRASONIC REFERENCE STANDARD (MDC-K5225 FIGURE 1.27 SHEETS 1-6, PG.1-6 SECTION 2-1 | 1 | |
| MD90 UPPER TR STANDS | MD 90 UPPER TR STANDS | 1 | |
| MG-410 | CENTRIFUGE TUBE WITH STAND | 1 | |
| MG0010G00131 | BOX ELECTROAVIONIC, STANDARD TOOLS | 1 | |
| MHS-12-1A-2 | ALUMINUM (7075-T6) MULTI-HOLE REFERENCE STANDARD WITH CERTIFICATE TRACEABLE TO NIST | 1 | |
| MM00013840 | CENTRE STAND item 3 | 1 | |
| MPI-WS15-2 | WING ACCESS STAND 1)WATER PROOF LIGHTING 2) ELECTRICLA CONNETORS PER STAND 3)PNUEMATIC CONNETION | 1 | |
| MRC005574 | INDICATOR/REGISTER - MOISTURE, RADOME (MODEL A8AF) (115 V) (CONSISTS OF ELECTRODE GUN, METER, BATTERY, CHARGER/CALIBRATION STANDARD AND 3 FOOT CABLE) | 3 | |
| MRC006507 | INDICATOR/REGISTER - MOISTURE, RADOME (MODEL A8AF) (230 V) (CONSISTS OF ELECTRODE GUN, METER, BATTERY, CHARGER/CALIBRATION STANDARD AND 3 FOOT CABLE) | 5 | |
| MS3160-20 | Military Standard MS3160-20 Inserter & Remover, Electrical Connector | 1 | |
| MT-MX-1837A | ALUMINUM CENTRIFUGE STAND. | 1 | |
| MTSESBCFM56-3-5-7 | ENGINE WORK TRANSPORT STAND CFM56 | 1 | |
| MTSESCRB211 | RB211-535 TRANSPORT STAND | 1 | |
| MTSGSE-0006-0000 | CRADLE WITH TRANSPORTATION STAND V2500 | 1 | |
| N/A | COWLING TRANSPORTATION STAND | 5 | |
| NAS1756-24 | National Aerospace Standard NAS1756-24 Red-White 24" Remove Before Flight Streamer | 23 | |
| NAS1756-36 | National Aerospace Standard NAS1756-36 Red-White 36' Remove Before Flight Streamer | 20 | |
| NCS67011 | PARKING STAND, ALTERNATE FOR TROLLEY-NCS67011 | 1 | |
| NCU 9230B | TRANSPORTATION STAND | 1 | |
| NCU9240 | INTERCASE TRANSIT AND PARKING STAND | 1 | |
| NDT 7005 | ULTRASONIC CALIBRATION STANDARD) | 2 | |
| NDT 7015B | ULTRASONIC CALIBRATION REFERENCE STANDARD | 1 | |
| NDT 7078 | ULTRASONIC CALIBRATION REFERENCE STANDARD | 1 | |
| NDT3023 | BOEING REFERENCE STANDARD TRANSDUCER POSITIONER TRANSDUCER POSITIONER TRANSDUCER POSITIONER CONTACT TRANSDUCER | 4 | |
| NDT3023P1 | BOEING REFERENCE STANDARD TRANSDUCER POSITIONER TRANSDUCER POSITIONER TRANSDUCER POSITIONER CONTACT TRANSDUCER | 4 | |
| NDT3023P2 | BOEING REFERENCE STANDARD TRANSDUCER POSITIONER TRANSDUCER POSITIONER TRANSDUCER POSITIONER CONTACT TRANSDUCER | 4 | |
| NDT3023P3 | BOEING REFERENCE STANDARD TRANSDUCER POSITIONER TRANSDUCER POSITIONER TRANSDUCER POSITIONER CONTACT TRANSDUCER | 4 | |
| NDT3038 | ULTRASONIC REFERENCE STANDARD | 4 | |
| NDT3312 | NDT - ULTRASONIC REFERENCE STANDARD | 2 | |
| NDT3316 | NDT - ULTRASONIC REFERENCE STANDARD | 2 | |
| NDT4232 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 2, Page 6. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4233 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 3, Page 7. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4234 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 4, Page 8. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4235 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 5, Page 9. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4236 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4237 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4238 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4239 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4243 | BOEING REFERENCE STANDARD 747 Part 6 57-10-31 Page 4 Figure 1. Material: 2024-T3 or An Airplane Quality with an Electrical Conductivity of 28-43% IACS. Fasteners: Non-Magetic Fastener. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT518 | Ultrasonic Inspection Reference standard 757 | 1 | |
| NDT6045-SC1 | Boeing Transducer Guide. Material: Delrin ( Black Acetal). Used with NDT6045 Reference Standard. 767 PART 4 54-50-08 PAGE 15 FIGURE 3 | 1 | |
| NDT6045-SC2 | Boeing Transducer Guide. Material: Delrin ( Black Acetal). Used with NDT6045 Reference Standard. 767 PART 4 54-50-08 PAGE 15 FIGURE 3 | 1 | |
| NDT6052 | BOEING REFERENCE STANDARD 767 P4, 57-50-27. UT INSPECTION OF MAIN LANDING GEAR FORWARD TRUNNION SUPPORT SIDE LOAD FITTING | 1 | |
| NDT6076 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6077 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6078 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6079 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6091G1 | NDT6091 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 26 FIGURE 2. | 1 | |
| NDT6091G2 | NDT6091 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 26 FIGURE 2. | 1 | |
| NDT6092G1 | NDT6092 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 27 FIGURE 3 | 1 | |
| NDT6092G2 | NDT6092 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 27 FIGURE 3 | 1 | |
| NDT6102 | BOEING REFERENCE STANDARD. MATERIAL: 6AL-4V TITANIUM. Includes Test Report Traceable to NIST. | 1 | |
| NDT6104 | BOEING REFERENCE STANDARD. MATERIAL: 6AL-4V TITANIUM. Includes Test Report Traceable to NIST. | 1 | |
| NDT655G | Boeing Standard, 767 PT4 54-50-03:PG9 FIG4 Tranducer Guides | 1 | |
| NDT656G | Boeing Standard, 767 PT4 54-50-03:PG9 FIG4 Tranducer Guides | 1 | |
| NDT676 | BOEING REFERENCE STANDARD FOR PW4000 and JT9D-7R4D/E STRUTS FIGURE 2 Part 4 54-50-07 page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT7001P | BOEING LUCITE WEDGE WITH A .315"Ø FLAT BOTTOM HOLE, 2.010" RADIUS FOR A .25"Ø STRAIGHT BEAM TRANSDUCER. USED WITH REFERENCE STANDARD NDT7001. | 1 | |
| NDT773-G1 | TRANSDUCER GUIDE THE TRANSDUCER GUIDE IS USED WITH REFERENCE STANDARD NDT773 ONLY | 2 | |
| NDT776 | Boeing Reference Standard 777 PT4 54-51-03 PG 7 FG 2 *make part out of 2024-T3, heat treat to 2024-T8 | 2 | |
| NDT815-G1 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NDT815-G2 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815. | 1 | |
| NDT815-G3 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815. | 1 | |
| NDT815-G4 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NDT815-G5 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NDT815-G6 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NEC-6153 | AIR TRACTOR: NDT ENGENEERING REFERENCE STANDARD | 1 | |
| NEK-9030 | KIT, INSPECTION, ULTRASONIC (STANDARD) | 1 | |
| NEK-9030-9030FB | KIT, INSPECTION, ULTRASONIC (STANDARD) | 1 | |
| NGCF68200 | ENGINE TRANSPORT STANDS CF-80E | 2 | |
| NGT5100 | TRENT 500 TRUCK STAND | 1 | |
| NGT7100 | TRENT 700 TRUCK STAND | 1 | |
| NGT8100 | TRENT 800 TRUCK STAND (MPS) | 1 | |
| NGT8R100 | TRENT 800 ROLLOVER STAND | 1 | |
| NGT8RA100 | TRENT 800 ENGINE STAND | 1 | |
| NGTAS5100 | TRENT 500 AIR/TRUCK STAND | 1 | |
| NGTAS7100 | TRENT 700 AIR/TRUCK STAND | 2 | |
| NGTAY611-8 | STAND - ENGINE TRANSPORT TAY | 1 | |
| NPN-011 | TRIANGLE STAB STAND-01 | 1 | |
| OM2-1522 | HI-LOK® STANDARD PROTRUSION GUAGES | 1 | |
| OM2-1522 HST | HI-LOK® STANDARD PROTRUSION GUAGES | 1 | |
| OMG33020 | 2 TON TRIPOD STAND | 1 | |
| OMK-WLS-STD | OMK-WLS-STD;OMK Wireless Contractor Standard Package | 1 | |
| P60507 | ENGINE, FULL, STANDARD AIR/TRUCK COVER | 1 | |
| PDL 1030J | HERCULES C-130 UT CALIBRATION STANDARD FIGURE 17 SHEETS 1&2 20-40-00. FASTENER (HL18PB6-8, HL18PB6-6, HL70-6). Includes Test Report Traceable to NIST and Certificate of Conformance. | 2 | |
| PDL 1214J | CALIBRATION STANDARD, AS ILLUSTRATED IN CHAPTER-SECTION 20-40-00. | 2 | |
| PDL 1254J | HERCULES C-130 UT CALIBRATION STANDARD FIGURE 21 SHEETS 1-4 20-40-00. FASTENER (HLT116 HI-LOCK FASTENERS WITH SELF LOCKING NUTS). Includes Test Report Traceable to NIST and Certificate of Conformance. | 2 | |
| PDL-419 | CALIBRATING STANDARDS (AS ILLUSTRATED SP-96) | 1 | |
| PHS-A2647-TMC-WRI | LPT MODULE TRANSPORTATION STAND | 1 | |
| PK1935 | BRACKET FOR MOTORSTAND ATR | 2 | |
| PK2164 | BRACKET FOR MOTORSTAND ATR | 1 | |
| PK5080 | TRANSPORT STAND FOR A PRATT 127 ENGINE WITH SHOCK MOUNTS | 2 | |
| PM70967 | MLG/NLG REM/INSTALL STAND (NO TRANS.) | 1 | |
| PS-COTS-QSG | PS-COTS-QSG;One-day Onsite Standard QuickStart Services Training for Observer COTS | 1 | |
| PS-STANDARD-QUICKSTART-3 | PS-STANDARD-QUICKSTART-3;Three-Day Onsite Standard QuickStart Services Training | 1 | |
| PSP 396 | BOMBARDIER CALIBRATION STANDARD, CL-215T PART 6 FIGURE 5 PAGE 8. A TOTAL OF 15 HOLE SIZES: 4mm THRU 18mm MATERIAL: 2024T3 ALUMINUM. Includes Certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| PT6-114 | TRANSPORTATION STAND | 1 | |
| PTS-1 | 853;PTS-1 Precision Transfer Standard | 1 | |
| PTS-3 | PTS-3;PTS-3 Calibration Transfer Standard | 1 | |
| PW-120 | PW JT9D Series QEC OFF-LINK ENGINE SHIPPER/TRANSPORT, LONG-TERM STORAGE COVER "BAG" or "ENVELOPE", Fully Enclosed, JT9D-7R4 model, STANG Engine Stand | 1 | |
| PW120ENGINESTAND | PW120 / ATR ENGINE STAND | 1 | |
| PW127 TRANSPORTATION STAND | PW127 ENGINE TRANSPORTATION STAND | 1 | |
| PW150AM0BILEECKIT | ENGINE TRANSPORT STAND PW150A | 1 | |
| PW4000-ENGINE-STAND | PW4000 ENGINE TRANSPORTATION STAND | 9 | |
| PWA 211430 | STAND, TRANSPORT | 4 | |
| PWA 80626 | STAND, TRANSPORT | 1 | |
| PWA 86604 | STAND, TRANSPORT | 1 | |
| PWA 87078 | STAND, STORAGE/TRANSPORT | 1 | |
| PWA 88233 | STAND & CRADLE - TRANSPORTATION / BOOTSTRAP | 1 | |
| PWA10125 | Truck Stand | 3 | |
| PWA101556 | STAND-LOW PROFILE TRANSPORT | 1 | |
| PWA105621 | STAND-BUILD AND TRANSPORT,FAN CASE MODULE(VERTICAL) | 1 | |
| PWA106390 | STAND,TRANSPORTATION | 1 | |
| PWA106473 | ADAPTERS SET AFT - ENGINE TO TRANSPORT STAND | 1 | |
| PWA107001 | STAND,TRANSPORTATION SAFETY PLATFORM | 1 | |
| PWA107295 | TRANSPORTATION STAND PRUPULSOR | 1 | |
| PWA107715 | ADAPTERS SET AFT - ENGINE TO TRANSPORT STAND | 1 | |
| PWA111065 | BUILD AND TRANSPORT STAND | 1 | |
| PWA115185 | ENGINE TRANSPORT STAND | 2 | |
| PWA115468 | STAND, TRANSPORT - ENGINE | 1 | |
| PWA211314 | STAND, TRANSPORT | 2 | |
| PWA211330 | STAND, TRANSPORT - ENGINE ASSEMBLY | 1 | |
| PWA211421 | ENGINE FLIGHT MOUNTS TRANSPORT SUPPORT BEAM: NEEDS TO BE EQUAL TO STAND | 3 | |
| PWA211430 | STAND, TRANSPORT | 4 | |
| PWA211430A | STAND, TRANSPORT - ENGINE ASSEMBLY | 1 | |
| PWA211815 | STAND, TRANSPORT - ENGINE | 2 | |
| PWA25030 | STAND - FAN ROTOR STORE & TRANSPT_[PWA25030] | 1 | |
| PWA25096 | STAND - LPT TRANSPORTATION & STORAGE_3315X1549X1384MM/480KG_[PWA25096] | 2 | |
| PWA29167 | STAND, STORAGE & TRANSP - FAN ROTOR_[PWA29167] | 2 | |
| PWA80626 | STAND, TRANSPORT | 1 | |
| PWA85267 | STAND STORAGETRANSPORT | 1 | |
| PWA85269 | STAND STORAGETRANSPORT | 1 | |
| PWA85270 | STAND STORAGETRANSPORT | 1 | |
| PWA85271 | STAND STORAGETRANSPORT | 1 | |
| PWA85272 | STAND STORAGETRANSPORT | 1 | |
| PWA85273 | STAND STORAGETRANSPORT | 1 | |
| PWA85274 | STAND STORAGETRANSPORT | 1 | |
| PWA85415 | SLEEVE SUPPORT. ENGINE ASSY.LPT TRANSPORT STAND | 1 | |
| PWA85416 | SLEEVE SUPPORT. ENGINE ASSY.LPT TRANSPORT STAND | 1 | |
| PWA85417 | SLEEVE SUPPORT. ENGINE ASSY.LPT TRANSPORT STAND | 1 | |
| PWA85418 | SLEEVE SUPPORT. ENGINE ASSY.LPT TRANSPORT STAND | 1 | |
| PWA85419 | SLEEVE SUPPORT. ENGINE ASSY.LPT TRANSPORT STAND | 1 | |
| PWA86520 | STAND TRANSPORT & BUILD | 1 | |
| PWA88233 | LOW PROFILE-TRANSPORT STAND | 1 | |
| PWA88794 | TRANSPORTATION STAND FOR PW4168 ENGINE | 1 | |
| PWC34300 | STAND FOR ATR72-600 ENGINE PW127M | 8 | |
| PWC41300 | Transport stand | 1 | |
| PWC48125 | TRUNNION-BUILD STAND | 1 | |
| PWC56978 | TRANSPORTATION STAND | 1 | |
| PWC58587 | Transport stand | 1 | |
| PWC62090 | TRANSPORT STAND-INTERMEDIATE | 1 | |
| PWC64429 | Transport stand | 1 | |
| R1010 | TEST RIG INCLUDE INSTRUMENT1499 BRAKE STANDR1076 | 1 | |
| R537-B1300-000W6400-02-00 | TRANSPORTATION STAND STIFFENING DEVICE C20 - C33 | 1 | |
| R537-B1301-000W8200-01 | TRANSPORTATION STAND UPPER FRAME SHELL | 1 | |
| R537-B1302-000W8200-01 | TRANSPORTATION STAND LOWER FRAME SHELL | 1 | |
| R857ELSV60 | BORESCOPE - RIGID (MEETS GENERAL ELECTRIC OR CFM STANDARD PRACTICES MANUAL SPECIFICATION SUCH AS: MODEL R857ELSV60) STD-10719 | 1 | |
| RATCHET, SEALED HEAD (HIGH STRENGTH), STANDARD HANDLE, 4 7/16" | RATCHET, SEALED HEAD (HIGH STRENGTH), STANDARD HANDLE, 4 7/16" | 1 | |
| RB T101612 | BUILD UP TRANSMISSION STAND | 2 | |
| RB T101753 | COMBINING GEARBOX ASSEMBLY & TRANSPORT STAND | 2 | |
| RB T101970 | Main Transmission Adapter Assembly Build Up Stand | 1 | |
| RB211 | RB211 535 E4 BOOT STRAP CAPABLE ENGINE STAND | 1 | |
| RB211-524 | SPL-5320 STAND - MULTIPURPOSE, RB211-524 ENGINE TRANSPORT | 1 | |
| RBI8000T | HELIBOX TROLLEY CASE WITH TOOLS – IMPERIAL (SAE / STANDARD)/METRIC KIT, INCLUDES 236 TOOLS | 1 | |
| RBI9400T | MECHANIC HAND TROLLEY CASE WITH TOOLS – IMPERIAL (SAE / STANDARD) KIT (161 TOOLS) | 1 | |
| RBW6205G11532- 3G | TRANSPORTABLE STAND, SWASHPLATE SUPPORT | 3 | |
| RBW7105G00131-3G | ENGINE TRANSPORT STAND | 2 | |
| RFENGSTDCF680ACX1 | CF6-80A Transportation Stand | 1 | |
| RFENGSTDCF680AEX1 | CF6-80E TRANSPORTATION STAND | 1 | |
| RFENGSTDCFM3 | CFM56 Transportation Stand | 1 | |
| RFENGSTDCFM5BCX01 | CFM56-5 Transportation Stand | 1 | |
| RFENGSTDCFM7B | CFM56-7 Transportation Stand | 1 | |
| RFENGSTDIAE010 | V2500 Transportation Stand | 1 | |
| RFENGSTDIAECFM2 | V2500-A1/A5 & CFM56-5A/B Engine Transportation Stand | 1 | |
| RFENGSTDJT9PW94XY1 | PW4000-94 Engine Transportation Stand | 1 | |
| RFENGSTDPW40X1 | PW4000 Transportation Stand | 1 | |
| RFENGSTDT700X02 | TRENT700 Stand | 1 | |
| RH12-T40-7075T6 | CALIBRATION REFERENCE STANDARD (CRS), ALUMINUM ALLOY, CONDUCTIVITY VALUE OF 35 TO 45 IACS THAT CONTAINS VARIOUS HOLE SIZES WITH 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (TECHNA NDTEQUIVALENT) | 1 | |
| RM200-T40-T6AL4V | CALIBRATION REFERENCE STANDARD, TITANIUM ALLOY, CONDUCTIVITY 1.1 % IACS, CONTAINS 0.010 IN. (0.25 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP SURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES, AND VARIOUS SIZE HOLES WITH 0.040-IN (1.02 MM) EDM NOTC | 1 | |
| ROBOMULE 5000 | TRONAIR 13-6603-6000 TRONAIR 13-6603-6000 GROUND HYD. POWER STAND | 1 | |
| RRT027632 | TRANSPORTATION STAND | 1 | |
| RRT029080 | SUPPORT - CENTRE SECTION OF HP BUILD STAND RRT025821 | 1 | |
| RRT044500 | ENGINE TRANSPORTATION STAND | 1 | |
| RRT044502 | TRANSPORTATION STAND FRONT ADAPTER (TRUNNION) | 1 | |
| RRT044503 | TRANSPORTATION STAND FRONT ADAPTER (LOWER LUG) | 1 | |
| RRT044504 | TRANSPORTATION STAND REAR ADAPTER (LEFT LOWER LUG) | 1 | |
| RRT044505 | TRANSPORTATION STAND REAR ADAPTER (RIGHT LOWER LUG) | 1 | |
| RRT044506 | TRANSPORTATION STAND - GUARD RAIL (REAR) | 1 | |
| RRT044507 | TRANSPORTATION STAND - GUARD RAIL (FRONT) | 1 | |
| RRT050387 | TURNOVER STAND - LIFT & TURNOVER HP/IP SUPPORT STRUCTURE | 1 | |
| RRT058180 | TROLLEY - ENGINE BUILD STAND SLING | 1 | |
| RRT059646 | TRANSPORTATION STAND Mod 05- T1000, T900, T700 | 1 | |
| RRT059878 | STAND, TRANSIT, FAN ASSY | 1 | |
| RRT061134-3-DET9 | TRENT XWB CORE STAND PART | 1 | |
| RRT075000 | Trent 1000 Engine Stand- Basic transportation stand B787 | 1 | |
| RRT076147-2 | Trent 1000 Max spare engine MVP bag for APS stand | 1 | |
| RRT089139 | TRENT XWB BASIC STAND | 1 | |
| RRT095052 | Engine Stand Trent 7000 - All Purpose Check before quoting !!!!!!!! | 1 | |
| RRT095052-3 | APS ENGINE STAND TRENT 7000 | 1 | |
| RRT096413 | PYLON TRANSPORTATION STAND | 1 | |
| RRT099349 | TRANSPORT STAND | 1 | |
| RRT102554 | Trent XWB Engine Stand | 3 | |
| RRT104060 | FAN TRANSPORTATION STAND CASTOR IMMOBILISER | 1 | |
| RRT105698 | TRENT XWB STAND | 2 | |
| RRT110718 | TRENT 700 IDG STAND | 4 | |
| RS-502 | ASTRA G100 REFERENCE STANDARD, PG.613: 04-00-00 FIG.605 | 1 | |
| RS-502-C | ASTRA G100 REFERENCE STANDARD, 2 EDM FATIGUE CRACKS 2.4mm X 1.2mm (PG.613: 04-00-00 FIG.605) | 1 | |
| RS05115M-304 | Surface Standard (metric), 304 stainless, with .5, 1 and 1.5 mm deep notches | 1 | |
| RS051246M-304 | Surface Standard, Metric, 304 Stainless | 1 | |
| RS0512M-2024T3 | Surface Standard (Metric), .5mm, 1mm, 2mm, 2024-T3 aluminum | 1 | |
| RS0512M-2024T3-1 | Surface Standard (metric), 2024-T3 aluminum .5mm, 1mm and 2mm notches..80mm long x 35mm wide x 7mm thick, Width .1 +/- .05 | 1 | |
| RS0512M-304 | Surface Standard (Metric), .5mm, 1mm, 2mm, 304 Stainless | 1 | |
| RS0512M-304L | Surface Standard (Metric), .5mm, 1mm, 2mm, 304L Stainless | 1 | |
| RS0512M-4340 | Surface Standard (Metric), .5mm, 1mm, 2mm, 4340 | 1 | |
| RS0512M-6061-T4 | Surface Standard (Metric), .5mm, 1mm, 2mm, 6061-T4 | 1 | |
| RS0512M-6AL4V | Surface Standard (Metric), .5mm, 1mm, 2mm, 6AL4V Titanium | 1 | |
| RS0512M-7075T6 | Surface Standard (Metric), .5mm, 1mm, 2mm, 7075-T6 aluminum | 1 | |
| RS0512M-I600 | Surface Standard (Metric), .5mm, 1mm, 2mm, Inconel 600 | 1 | |
| RS0512M-MAG | Surface Standard (Metric), .5mm, 1mm, 2mm, Magnesium | 1 | |
| RS0824-316 | SURFACE REFERENCE STANDARD WITH CERTIFICATE TRACEABLE TO NIST. STAINLESS STEEL (316) WITH EDM NOTCH DEPTHS OF 0.008, 0.020 AND 0.040 INCHES, BLOCK OVERALL DIMENSIONS 1 X 4 0.25 INCHES. | 1 | |
| RS0824-4340/HT | Surface Standard, .008"-.020"-.040" deep notches, 4340 Steel, Heat Treat to 180-200KSI | 1 | |
| S-17-1 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 1, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-2 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 2, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-3 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 3, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-4 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 4, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-5 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 5, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-6 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 6, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-7 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 7, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-8 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 8, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S/343502 | STANDOFF,MULTIPLE TRANSDUCER | 1 | |
| S3S20776085 | TOWBAR, FOR TRANSPORT STAND CP30162/3 | 1 | |
| SB09550023-17 | Douglas Reference Standard Assembly 55-23 Figure1 sheets 1-5, Pages 31-35. Material: 2024-T3 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 2 | |
| SB09570184-7 | Ultrasonic Inspection Reference standard | 1 | |
| SB10270203-5 | Douglas Reference Standard Inboard Slat Drive Arm. Bulletin A27-203. Figure1 sheet 11, Pages 31-35. Material: HY-TUF or 4000 Series Steel CAD Plated. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| SCA-1289.00 | HYDRO STANDARD B737 TAIL TRIPOD JACK | 1 | |
| SCA-N2-KIT-DIN477 | DIN 477 NITROGEN REGULATOR BRACKET KIT (OTHER NATIONAL STANDARDS ON STOCK ALSO) | 1 | |
| SK215T-10001 | CALIBRATION STANDARD NACELLE SUPPORT - FORK END & STRUT | 1 | |
| SK601R-30008A | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERED FASTENED ASSEMBLY, EQUIVALENT IN MATERIAL AND THICKNESS AS THE INSPECTION AREA CONTAINING SUBSURFACE ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 6 | |
| SK601R-30039 | ULTRASONIC REF STANDARD TOOL | 2 | |
| SLS-123456-SS304 | BOEING REFERENCE STANDARD PER DRAWING STD-1. MATERIAL: 304 STAINLESS STEEL. CHEMICAL CONVERSION COATING PER MIL-DTL-5541, CLASS 1A. Includes Certification Traceable to NIST and Material Certs. | 1 | |
| SN05-6489 | ULTRASONIC ANGLE BEAM STANDARD | 1 | |
| SPC1377 | STAND - TRANSPORTATION, GEARBOX | 1 | |
| SPL-1468 | STAND ENGINE TRANSPORT | 1 | |
| SRS-0824S-4340 | EC Reference. Wing to fuselage lateral attachement. Use to calibrate standard SRS-0824S to calibrate the instrument. | 1 | |
| SRS-0824SS-316 | SURFACE REFERENCE STANDARD WITH CERTIFICATE TRACEABLE TO NIST. STAINLESS STEEL (316) WITH EDM NOTCH DEPTHS OF 0.008, | 1 | |
| SS-MT-SVRUPLD-SUPP-1YR | SS-MT-SVRUPLD-SUPP-1YR;Support for standard MTA Test Result Server upload feature - 1YR/INSTR | 1 | |
| ST1257B | 4 FLUTE SOLID CARBIDE STRAIGHT REAMER "DREAMER" UNDER BOEING STANDARD TOOL P/N: ST1257B SIZE: STRAIGHT SHANK, DIAMETER 0.1285", LENGTH 6" | 1 | |
| ST1257B1900-600-1 | 4 FLUTE SOLID CARBIDE STRAIGHT REAMER "DREAMER" UNDER BOEING STANDARD TOOL P/N: ST1257B SIZE: STRAIGHT SHANK, DIAMETER 0.190" LENGTH 6" | 1 | |
| ST1864P | Standard Tool Reamer - Carbide, Straight Flute, Piloted | 1 | |
| ST1864R | STANDARD TOOL - REAMER, CARBIDE, MULTI-STEP, STRAIGHT FLUTE | 1 | |
| ST2580-436B | STANDARD TOOL TORQUE WRENCH BOX END FOR BACC63CP ELECTROCAL CONNECTOR | 1 | |
| ST2598C | STANDARD TOOL - HOLDER TOOL FOR WALTER KIDDE ELECTRICAL CONNECTOR | 2 | |
| ST2598C-1 | Standard tool-holder tool for walter kidde electrical connector | 5 | |
| ST2598C-201 | Standard tool-holder tool for walter kidde electrical connector | 3 | |
| ST4130 | CALIBRATION REFERENCE STANDARD, CARBON STEEL 4130 ALLOY, CONTAINING 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ OR COMMERCIALLY AVAILABLE). | 1 | |
| ST42-020 | CONTROL STAND FOR JACKS | 1 | |
| ST4340 | CALIBRATION REFERENCE STANDARD BLOCK - MADE FROM 4340 STEEL, MIL-S-5000, CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ OR COMMERCIALLY AVAILABLE). | 5 | |
| ST6396 | TEST STAND-TE FLAP TRANSMISSION | 1 | |
| ST6760 | STANDARD TOOL - ULTRASONIC LEAK PROBE TOOL | 1 | |
| ST6760A | STANDARD TOOL - ULTRASONIC LEAK PROBE TOOL | 2 | |
| ST7217J | STANDARD TOOL - ALIGNMENT PIN WITH WARNING STREAMER | 1 | |
| ST8711J | STANDARD TOOL - GAUGE PROTRUSION, HEX DRIVE BOLT WITH LOCKBOLT COLLARS | 1 | |
| ST8711J-6 | Standard Tool - Gage Protrusion, Hex Drive Bolt | 1 | |
| ST8744 | Standard tool leak tracking inb'd wing assy | 2 | |
| ST895A-2 | STAND-OFF ELECTRICAL | 1 | |
| ST921MB | STANDARD TOOL - STRAIGHT SLEEVE | 1 | |
| ST9999ART | Standard tool-aerostrip removal tool | 3 | |
| STANDARD-C | MIL-STD-2154A, STANDARD ULTRASONIC TEST BLOCK FOR AGNLE BEAM EXAMINATION, 7075-t6 | 1 | |
| STD-00107021 | Avcon Industries LFEC Calibration Reference Standard. BNC Document: 00107021, Rev. B Figure 7 Page 22. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| STD-1--AL | Custom Radius Channel Standard Material: 7075-T651 ALUMINUM. Standard to include a total of 62 EDM flaws identified as A, B,C, D, E, and F in the drawing. Includes test report traceable to NIST standards which comply with MIL-Q-9858A, Mil-4-45208A. | 1 | |
| STD-1-TI | Custom Radius Channel Standard Material: 6AL-4V Titanium. Standard to include a total of 62 EDM flaws identified as A, B,C, D, E, and F in the drawing. Includes test report traceable to NIST standards which comply with MIL-Q-9858A, Mil-4-45208A. | 1 | |
| STD-CAL-1 | STD-CAL-1;1yr. Renewal Standard Term Calibration Contract - Existing Equipment | 1 | |
| STD400WHT | STAND-OFF LED ELECTR | 1 | |
| STI3218 | STANDARD TOOLS BOX ELECTROAVIONIC | 1 | |
| SUC-169 | STANDARD CONTACT TRANSDUCER | 2 | |
| SUC169 | STANDARD CONTACT TRA | 2 | |
| SW1-800 | TRAVEL COVER, Light Weight Canopy Cover (STANDARD CANOPY) | 1 | |
| SWE 13875 | MAINTENANCE TRANSPORTATION STAND | 2 | |
| SWE-13875 | MAINTENANCE TRANSPORTATION STAND | 2 | |
| SWE13875 | XMSN/ENG MAINTENANCE TRANSPORT STAND | 2 | |
| SWE13875-60 | TRANSMISSION ADAPTER MAIN STAND | 1 | |
| T-710-DIA-UPS | HAND TRUCK; STANDARD PLATFORM 1000 LB. CAPACITY | 1 | |
| T101612 | BUILD UP TRANSMISSION STAND | 1 | |
| T3B1 | STRETCH JAW ASSEMBLY STANDARD | 1 | |
| T700ENGINESTAND | TRENT 700 ENGINE STAND | 2 | |
| T72 | RATCHET, SEALED HEAD (HIGH STRENGTH), STANDARD HANDLE, 4 7/16" | 2 | |
| T936 | RATCHED,SEALED HEAD(HIGH STRENGTH),STANDART HANDLE,4 7/16IN | 1 | |
| TC4 | STANDARD CONTACT TRANSDUCER | 1 | |
| TC4-255S | STANDARD CONTACT TRA | 2 | |
| TEC/HYD/1423-2 | TRENT 1000 MAX SPARE ENGINE VP BAG FOR APS STAND | 1 | |
| TEC/RR/1106 | STAND COVER TRENT 1000 | 1 | |
| TEK-1504-5/4L | LENGTH, (TECHNA NDT OR EQUIVALENT) SLIDING PROBE WITH ADJUSTABLE STAND-OFF FOR PROTRUDING FASTENER, 100 HZ TO 20 KHZ FREQUENCY, REFLECTION, 0.594 IN. (15.09 MM) WIDTH, 1.469 IN. (37.31 MM) LENGTH, 1.125 IN. (25.58 MM) HEIGHT. (TECHNA NDT OR EQUIVALENT) | 1 | |
| TEK-1538-ECRS | C-130 Main Landing Gear Torque Strut, Standard | 1 | |
| TEK-3038 | Special Hole Probe, 25KHz, Counterbore Interface Centered Coil, For 737 Strut Lower Chord Standard | 1 | |
| TEK-5050-767 | Transducer Kit includes TEK-5050-1 Thru -6 for NDT6025-1 thru -6 standards | 1 | |
| TEK-5154 | CUSTOM 2 ELEMENT RING TRANSDUCER FOR BORE HOLE INSPECTION WITH BOEING REFERENCE STANDARD 55-10-13 PAGE 9 FIGURE 2. TWO MICRODOT CONNECTORS "A" AND "B" | 1 | |
| TEK-9087L | 5 MHZ SURFACEWAVE TRANSDUCER, REFERENCE STANDARD NDT3310, LEFT SOUND DIRECTION | 1 | |
| TEK-9087R | 5 MHZ SURFACEWAVE TRANSDUCER, REFERENCE STANDARD NDT3310, RIGHT SOUND DIRECTION | 1 | |
| TEKIT-5050-767 | TRANSDUCER KIT INCLUDES TEK-5050-1 THRU -6 FOR NDT6025-1 THRU -6 STANDARDS | 1 | |
| TEk-5838 | Transducer for standard 787-9-HS-9 | 1 | |
| TI-6AL-6V-2SN | CALIBRATION REFERENCE STANDARD, NO.TI-6AL-6V-2SN, MADE FROM TITANIUM ALLOY (1.1% IACS), CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED NOTCHES, (BOMBARDIER INC. OR EQUIVALENT) | 3 | |
| TK-2368/939 | CONTROL BOX HYDRAULIC SYSTEM COMPONENTS TEST STAND | 1 | |
| TM2594G001 | ENGINE TRANSPORT STAND | 1 | |
| TM30645-1 | PARKING STAND (TRENT 900) | 1 | |
| TMAM3E | 1/4" DRIVE METRIC 3 MM STANDARD HEX BIT SOCKET DRIVER | 1 | |
| TMH EC37-00-00 | Engine Transport Stand / Cradle - Trent 500 / Trent 700 | 1 | |
| TMH-EC03-00-00 | ENGINE TRANSPORTATION STAND | 3 | |
| TMHEC17-50-00 | RR TRENT 700 SERIERS ENGINE STAND | 4 | |
| TMHSD25-10-00 | HYD JACK TRIPOD STAND (777) | 1 | |
| TPA-CFM56 | THRUST REVERSER COWLING STAND TROLLEY | 1 | |
| TPA-CFM56 & IAE-V2500 | A320 THRUST REVERSER COWLING STAND TROLLEY | 1 | |
| TRANSPORTBOX ARC | COWLING TRANSPORTATION STAND | 1 | |
| TRDS-25-.450 | STANDARD DELAY. POLYSTYRENE 1/4 IN. DIAMETER, 10 MICROSECOND DELAY(0.45IN LONG), FITS 0.25 IN. REPLACEABLE DELAY LINE TRANSDUCERS | 1 | |
| TRENT 500 ENGINE STAND | TRENT 500 ENGINE STAND | 1 | |
| TRENT 700 | TRENT 700 ENGINE STAND | 1 | |
| TRENT 700 (OEM) | TRENT 700 (OEM) ENGINE STAND | 1 | |
| TRENT 700 (OEM) ENGINE STAND | TRENT 700 (OEM) ENGINE STAND | 1 | |
| TRENT 700 ENGINE STAND | TRENT 700 ENGINE TRANSPORTATION STAND | 4 | |
| TRENT 772B-60 STAND | TRENT 772B-60 STAND | 1 | |
| TRENT 800 ENGINE STAND | TRENT 800 ENGINE STAND | 1 | |
| TRENT 800 ENGINE STANDS | TRENT 800 ENGINE STANDS | 1 | |
| TRENT 800 ROLLOVER TRANSPORTAT | TRENT 800 ROLLOVER TRANSPORTATION STAND | 1 | |
| TRENT700ENGINESTAND | TRENT 700 ENGINE TRANSPORTATION STAND | 4 | |
| TRIPOD/STAND FOR EMCO 3115 | TRIPOD/STAND FOR HORN | 1 | |
| TYPE LS-2 | GENERAL ELECTRIC HALOGEN LEAK TEST STANDARD | 1 | |
| TZ72 | Ratchet Sealed Head (High Strength), Standard Handle, 4 7/16" | 1 | |
| Transportation Stand | Transportation Stand | 1 | |
| Trent 700 (OEM) | Trent 700 (OEM) Engine Stand | 1 | |
| Trent 700 (OEM) Engine Stand | Trent 700 (OEM) Engine Stand | 1 | |
| U55418-5 | ROLLOVER STAND FOR TRENT 800 | 1 | |
| U8860407 | ALUMINUM (7075-T6) MULTI-HOLE REFERENCE STANDARD WITH CERTIFICATE TRACEABLE TO NIST | 1 | |
| UK-1 | STANDARD U KIT (ULTRASONIC TESTING) | 1 | |
| UT-RC-5S-CASE | 5 -STEP CALIBRATION BLOCK, WOOD CASE FOR STANDARD INCH VERSION, CUSTOM INCH VERSION C2 AND METRIC A | 1 | |
| UVU2003025A | ADPTR KIT GAS STANDARD REVISED | 1 | |
| V1-IIW-CS | V-1 (A-2) IIW Angle Beam Calibration Block (Metric). Made to British Standard: BS-2704, German Standard: DIN 54-120, Australian Standard AS 2803 and ISO 2400. Material: A36/1018 Carbon Steel. Thickness of 1" / 25 mm, Height of 4" / 100 mm for straight bea | 1 | |
| V2500ENGINE DROP STAND/TRANSPO | A320 ENGINE DROP STAND/TRANSPORTATION STAND V2500 | 1 | |
| VOM1011B | WRENCH OPEN END STANDARD METRIC 10X11MM | 1 | |
| VOM1213B | WRENCH OPEN END STANDARD METRIC 12X13MM | 1 | |
| VOM1415B | WRENCH OPEN END STANDARD METRIC 14X15MM | 1 | |
| VOM1618B | WRENCH OPEN END STANDARD METRIC 16X18MM | 1 | |
| VOM1719B | WRENCH OPEN END STANDARD METRIC 17X19MM | 1 | |
| VOM1922B | WRENCH METRIC, OPEN END, STANDARD LENGTH, 19-22MM | 1 | |
| VOM2224B | WRENCH OPEN END STANDARD METRIC 22X24MM | 1 | |
| VOM2730B | WRENCH OPEN END STANDARD METRIC 27X30MM | 1 | |
| VOM3032B | WRENCH OPEN END STANDARD METRIC 30X32MMMM | 2 | |
| VOM67B | WRENCH OPEN END STANDARD METRIC 6X7MM | 1 | |
| VOM89B | WRENCH OPEN END STANDARD METRIC 8X9MM | 1 | |
| W-87 REF STD IBD | BOEING REFERENCE STANDARD. W-87 INBOARD 360 REFERENCE STANDARD. Materials: 2024-T351 and 7075-T651 Aluminum. Includes Test Report Traceable to NIST. | 1 | |
| W-87 REF STD OBD | BOEING REFERENCE STANDARD. W-87 OUTBOARD 360 REFERENCE STANDARD. Materials: 2024-T351 and 7075-T651 Aluminum. Includes Test Report Traceable to NIST. | 1 | |
| W-HV400/62 | Bowers W-HV400/62 Test Stand for HV400 Ultramatic Probe | 1 | |
| W-TS-100 | Bowers W-TS-100 Standard Tracer for TR200 | 1 | |
| W-TT300 | Bowers W-TT300 Ultrasonic Thickness Gauge 0.01mm Reading (5MHz) Probe Standard | 1 | |
| WP632- CALIBRATI ON | TRACEABLE CALIBRATION OF WOODPECKER WP-632AM-R HANDPIECE TO NATIONAL STANDARDS | 1 | |
| WP632- CALIBRATION | TRACEABLE CALIBRATION OF WOODPECKER WP-632AM-R HANDPIECE TO NATIONAL STANDARDS | 1 | |
| XBM1011A | WRENCH BOX OFFSET STANDARD METRIC 10X11MM | 1 | |
| XBM1012A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 10-12 MM, 12 POINT | 1 | |
| XBM1214A | WRENCH BOX OFFSET STANDARD METRIC12X14MM | 1 | |
| XBM1315A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 13-15 MM, 12 POINT | 1 | |
| XBM1415A | WRENCH BOX OFFSET STANDARD METRIC 13X15MM | 1 | |
| XBM1417A | WRENCH BOX OFFSET STANDARD METRIC 14X17MM | 1 | |
| XBM1618A | WRENCH BOX OFFSET STANDARD METRIC 16X18MM | 1 | |
| XBM1719A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 17-19 MM, 12 POINT | 1 | |
| XBM1821A | WRENCH BOX OFFSET STANDARD METRIX 18X21MM | 1 | |
| XBM2224A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 22-24 MM, 12 POINT | 1 | |
| XPT-HOSTED-BASE | XPT-HOSTED-BASE;Annual hosting fee for one standard instance of XPERTrak hosted products | 1 | |
| XW80530 | TRANSPORT STAND | 1 | |
| ZHP-200 | HI-LOK COLLAR REMOVAL PLIERS (STANDARD) (ZEPHTR) | 1 | |
| lAE5Rl8762 | STAND, TRANSPORT | 1 | |
| 5838217-1 | TRANSPORT/SHIPPING STAND | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
