| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| RSE7301 | TR REMOVAL TOOL | 3 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 006101 000 00 | EXTRACTION, REMOVAL & INSERTION TOOLS SIM MODULE EXTRACTION TOOL | 4 | |
| 00610100600 | EXTRACTION, REMOVAL & INSERTION TOOLS SIM | 4 | |
| 057-0289-00A | CONNECTOR REMOVAL / EXTRACTION TOOL | 3 | |
| 07540M | EXTRACTOR - REMOVAL TOOL 3/8 SQ. | 1 | |
| 08-0705-6000 | TOOL: PROP,TORQUE REMOVAL, TRONAIR | 6 | |
| 109-3130-55-117 | TOOL SET, TR PITCH CHANGE SLIDER REMOVAL | 1 | |
| 109-3130-58-101 | TOOL, TR HUB BUSHINGS REMOVAL | 1 | |
| 109-3130-70-101 | TOOL SET, TR DUPLEX BEARING REMOVAL | 1 | |
| 109-3130-82-101 | TOOL SET, TAIL ROTOR CONTROL ROD BUSHING REMOVAL/INSTALLATION/BREAKOUT CHECK. | 1 | |
| 109-3130-87-143 | TOOL KIT, TR HUB BUSHING REMOVAL/INSTALLATION | 1 | |
| 109-3131-02-101 | TOOL SET, TR BLADE ELASTOMERIC BUSHING REMOVAL/INSTALLATION | 1 | |
| 109-3401-64-101 | ENGINE TRANSMISSION DRIVE SHAFT REMOVAL/INSTALLATION TOOL | 1 | |
| 109-3401-64-105 | AGUSTA TOOL - ENGINE TO TRANS DRIVEHAFT REMOVAL/INSTL - COVERING | 1 | |
| 109-3401-64-107 | AGUSTA TOOL - ENGINE TO TRANS DRIVEHAFT REMOVAL/INSTL ASSY | 1 | |
| 109-3900-81-107 | TOOL KIT, ENGINE TO TRANSMISSION DRIVE SHAFT REMOVAL/ INSTALLATION | 1 | |
| 10ME65B00161-1 | TRUNNION REMOVAL TOOL - WING GEAR | 2 | |
| 10MIT65B00717 | FUSE PIN REMOVAL AND INSTALLATION TOOL - NACELLE STRUT DIAGONAL BRACE AND UPPER LINK | 1 | |
| 1107AT1 | STRAP REMOVAL TOOL | 1 | |
| 11â??4059 | Tool â Removal (Applies to ignition exciter) (Unison Industries â Bendix Corp.) | 10 | |
| 139W00-500-01 | REMOVAL TOOL FOR TRAY TABLE | 6 | |
| 139W00-50001 | REMOVAL TOOL RECARO FOODTRAY | 6 | |
| 18D12998-1 | REMOVAL TOOL, FUEL BOOST CARTRIDGE | 1 | |
| 206R2200-10 | 206TR BEARING REMOVAL TOOL KIT | 1 | |
| 2309-T006-001 | SOCKET- REMOVAL/INSTALLATION, LOCK NUTILLUSTRATED TOOLAND EQUIPMENT MANUAL | 14 | |
| 28-0-1827C | FIXATION TOOL (STAB CONTROL UNIT REMOVAL) | 3 | |
| 2C14678G01 | TOOL SET, REMOVAL ‐ RETAINER, LPTR BLADE | 1 | |
| 2C14678G02 | TOOL SET, STRAIGHTENING&REMOVAL, BLADE RETAINERS-LPT ROTOR | 2 | |
| 2C14733 | TOOL SET, REMOVAL-MAG. SEAL, N1 CONTROL ADAPT. | 2 | |
| 2C14733 REV C | TOOL SET, REMOVAL-MAG. SEAL, N1 CONTROL ADAPT. | 1 | |
| 2C6989G02 | TOOL - REMOVAL - LPTR SPACER RING | 1 | |
| 3008-550 | TOOL - SCREW REMOVAL (ALSO CALLED A "LESTER" TOOL) (USE WITH STANDARD 1/4" HEXAGON SCREW DRIVER BITS) (MAGNAVON INDUSTRIES INC) | 2 | |
| 313-3 | Skyscraper 3133 Amber Ultem Boeing Profile Seat Track Sealant Removal Tool | 2 | |
| 313-4 | Skyscraper 3134 Amber Ultem Boeing Profile Seat Track Sealant Removal Tool | 2 | |
| 3170010-1 | AFT TRUNNION PIN REMOVAL TOOL | 1 | |
| 3170034-1 | REMOVAL TOOL, MAIN LANDING GEAR STRUT METERING PIN | 1 | |
| 3170034-6 | REMOVAL TOOL, MAIN LANDING GEAR STRUT METERING PIN | 1 | |
| 3402799-1 | TOOL SET, MLG TRACK SHOE INSTALL / REMOVAL | 1 | |
| 376088AT2 | POWER CONTROL UNIT (PCU) SIGHT GLASS REMOVAL TOOL | 1 | |
| 376088LAT2-1 | POWER CONTROL UNIT (PCU) SIGHT GLASS REMOVAL TOOL (ALTERNATE PART NUMBER) | 1 | |
| 3G6405G01831 | REMOVAL TOOL, TR HEAD | 1 | |
| 3P99-430 | TOOL - REMOVAL, DC PUMP CARTRIDGE | 1 | |
| 401-601000-1/917 | REMOVAL TOOL, TRIM ACTUATOR (4000 A/C) | 1 | |
| 407-240-016-101 | TOOL SET BEARING REMOVAL TR DRIVE | 1 | |
| 460004787 | 146 RETRACTION JACK PIN REMOVAL TOOL | 1 | |
| 500T05780 | Phenom DC Pump Cartridge Removal Tool | 1 | |
| 500T05780-001 | TOOL - REMOVAL, DC PUMP CARTRIDGE | 1 | |
| 5120-01-398-2868 | EXTRACTOR-FASTNER REMOVAL TOOL | 4 | |
| 53921T200 | STROKING PISTON INSTALLATION AND REMOVAL TOOL | 1 | |
| 558-1-30072A | TOOL - REMOVAL, TRANSFER & FEED PUMPS | 1 | |
| 5916803-1 | SLAT TRACK REMOVAL TOOL A320 | 8 | |
| 608996 | HEATING CARTRIDGE REMOVAL/INST. TOOL | 1 | |
| 608996-1 | HEATING CARTRIDGE REMOVAL/INST. TOOL | 1 | |
| 62100-9610 | Backplane Header Removal Tool for GbX-U™, I-Trac™, Impact™, or TinMan | 1 | |
| 6877026 | "COO WASHER ASSEMBLY/ DISASSEMBLY TOOL COMPRESSES SPRING IN CARTRIDGE VALVE FOR INSTALLATION/REMOVAL OF SLOTTED WASHER. | 1 | |
| 6897098 | EXTRACTION TOOL, CHECK VALVE ASSISTS REMOVAL OF CHECK VALVE FROM FUEL NOZZLE CHECK VALVE CAVITY. | 1 | |
| 6500043020628 | Removal Tool (CET20-11) - Matrix | 1 | |
| 6904A9000-01 | TRANSFER TUBE REMOVAL TOOL | 1 | |
| 809-088 | EXTRACTION REMOVAL TOOL | 7 | |
| 856A1303G01 | WRENCH TOOLREMOVAL MAINENG.CONTROL/FUELP | 1 | |
| 856A3429 | TOOL, REMOVAL/INSTALLATION - OIL RESTRICTORS, AGB (REMOVAL/INSTALLATION TOOL) | 1 | |
| 856A3429G01 | Tool, Removal/Installation - Oil Restrictors, AGB (removal/installation tool) | 2 | |
| 856A3551 | TOOL SET, REMOVAL/INSTALLATION - TRANSFER GEARBOX ADAPTER AND NIPPLE RESTRICTOR | 1 | |
| 856A3551G01 | TOOL SET, REMOVAL/INSTALLATION - TRANSFER GEARBOX ADAPTER AND NIPPLE rESTRICTOR | 6 | |
| 856A3562 G02 | Tool Set Removal/Installation ‐ Oil Distributor | 1 | |
| 856A5820G01 | TOOL REMOVAL/INSTALL DISTRIBUTOR | 1 | |
| 856A5822G01 | TOOL REMOVAL/INSTALL DISTRIBUTOR | 1 | |
| 856A5823G01 | TOOL REMOVAL/INSTALL DISTRIBUTOR | 1 | |
| 856A5824G01 | TOOL REMOVAL/INSTALL DISTRIBUTOR | 1 | |
| 856A5825G01 | TOOL REMOVAL/INSTALL DISTRIBUTOR | 1 | |
| 8819681000 | CENTRAL TIE BOLT NUT REMOVAL/INSTALLATION TOOL | 2 | |
| 8G6430G0331 | TR DUPLEX BEARING REMOVAL/INSTALLATION TOOL | 1 | |
| 8G6430G03331 | TR DUPLEX BEARING REMOVAL/INSTALLATION TOOL | 1 | |
| 8G6510G00131 | TR DRIVE SHAFT N.1 REMOVAL TOOL | 1 | |
| 8G651OGOO131 | TR DRIVE SHAFT N.1 REMOVAL TOOL | 1 | |
| 8MIT65B01211-1 | INSTALLATION AND REMOVAL TOOL - BULKHEAD, SHOCK STRUT, WING LANDING GEAR | 1 | |
| 900G2400201-101 | MR transmission removal tool | 1 | |
| 9099-7-0-0 | EXTRACTION, REMOVAL & INSERTION TOOL | 3 | |
| 91067-2 | PINREMOVAL/EXTRACTION TOOL | 10 | |
| 925312-1 | TOOL, FUELING AND TRANSFER VALVE REMOVAL AND INSTALLATION | 1 | |
| 98A27508006000 | REMOVAL/INSTALL.TOOLS SPRING-V.TR.2&4 | 2 | |
| 98A27508006040 | REMOVAL/INSTALL.TOOLS SPRING-V.TR.2 | 1 | |
| 98A27508006042 | REMOVAL/INSTALL.TOOLS SPRING-V.TR.4 | 1 | |
| 98A27508679000 | REMOVAL/INSTALLATION TOOLS SPRING VANE TRACK 2&4 | 1 | |
| 98A27508679040 | REMOVAL/INSTALLATION TOOLS SPRING VANE TRACK 2 | 1 | |
| 98A27508679042 | REMOVAL/INSTALLATION TOOLS SPRING VANE TRACK 4 | 1 | |
| 98A53003500 | EXTRACTOR REMOVAL TOOL | 1 | |
| 98A53003500000 | REMOVAL TOOL OF PHILLIPS TORQUE OR EXTRACTION, MA | 21 | |
| 98D27804014000 | SLAT TRACK REMOVAL TOOL - A320 | 12 | |
| 98D54003007001 | CANTILEVER REMOVAL / REINSTALLATION FOR CFM56-5B GEOMETRIC TOOL | 2 | |
| 98D54003014002 | CANTILEVER REMOVAL / REINSTALLATION FOR CFM56-5B GEOMETRIC TOOL | 1 | |
| 98S57205001-100 | ATR TANK PANEL REMOVAL TOOL | 1 | |
| A25009 | TOOL REMOVAL BALL TRANSFER UNIT | 1 | |
| A25009-2 | REMOVAL TOOL - BALL TRANSFER UNIT | 8 | |
| A54003-42 | STRUT REMOVAL TOOL | 13 | |
| AAB0026 | TROQUE SOCKET REMOVAL TOOLS | 1 | |
| AT 2054 | REMOVAL TOOL, STRAIGHT TIP | 1 | |
| AT265A | PINSTRIP REMOVAL TOOL | 1 | |
| ATRD 6289 | REMOVAL TOOL, PLIER, SIZE 8, STRAIGHT | 1 | |
| C32021-1 | ANTISKID TRANSDUCER REMOVAL TOOL SET | 25 | |
| C32077-1 | SPL-20563, REMOVAL TOOL ASSY - GLAND NUT, SHOCK STRUT, MLG | 5 | |
| C54008-1 | TOOL-REMOVAL/INSTALLATION, ENGINE STRUT AFT FAIRING | 6 | |
| C54008-28 | TOOL - REMOVAL/INSTALLATION, CFM56-7 ENGINE STRUT AFT FAIRING | 6 | |
| C54008-53 | TOOL - REMOVAL/INSTALLATION, ENGINE STRUT AFT FAIRING | 8 | |
| C54008-54 | TOOL - REMOVAL/INSTALLATION, ENGINE STRUT AFT FAIRING | 8 | |
| C54011-59 | TOOL - REMOVAL/INSTALLATION, ENGINE STRUT | 8 | |
| C54016-1 | TOOL - REMOVAL/INSTALLATION, ENGINE STRUT | 5 | |
| C54017-90 | TOOL - REMOVAL/INSTALLATION, ENGINE STRUT AFT FAIRING | 5 | |
| C71020-105 | 737-NG ENGINE REMOVAL/INSTALLATION TOOL - BOOTSTRAP | 11 | |
| CET-F80-16 | REMOVAL/EXTRACTION TOOL (ITT CANNON) | 1 | |
| CJMD 332-004 | NLG STRUT BEARING REMOVAL TOOL | 1 | |
| CJMD332-004 | NLG STRUT BEARING REMOVAL TOOL | 1 | |
| CJMD832-006 | MAIN LANDING GEAR TRUNNION BEARING REMOVAL TOOL | 2 | |
| CJMDL32-003 | TRUNNION PIN REMOVAL TOOL | 1 | |
| CJMDS32-001 | FORWARD MAIN LANDING GEAR TRUNNION PIN REMOVAL TOOL | 1 | |
| CJMDX32-004 | MAIN LANDING GEAR TRUNNION BEARING REMOVAL TOOL | 2 | |
| CS-235-AG112 | Trolley Removal/Installation MK-46MOD005 Tool | 1 | |
| DMC1436 | DMC1436 - Electrical Connector Installing and Removal Tool Kit | 2 | |
| DMC986 | AF8 Tool Kit with Single Position Head, Removal Tool & Wire Stripper | 2 | |
| DRK159 | REMOVAL TOOL DRK159 TRAIN | 2 | |
| DRK230 | REMOVAL TOOL DRK230 TRAIN | 8 | |
| DRK266J | EXTRACTION, REMOVAL & INSERTION TOOLS REMOVAL TOOL | 5 | |
| DRT68842 | BELLCRANK RESTRAINT,TOOL,REMOVAL OF THE TARGET | 9 | |
| E-2-10-1 | CARTRIDGE REMOVAL TOOL | 10 | |
| E2-10-1 | DC PUMP CARTRIDGE REMOVAL TOOL | 10 | |
| E2‐10‐1 | Dc Pump Catridge Removal Tool | 10 | |
| EMB-00068-001 | WHEEL SPEED TRANSDUCER REMOVAL TOOL GSE 077 EMB 120 | 8 | |
| ET-10-1 | CARTRIDGE REMOVAL TOOL | 2 | |
| ET-101 | CARTRIDGE REMOVAL TOOL | 2 | |
| F1402369 | TOOL, IESI REMOVAL -INSTRUMENT PANEL | 14 | |
| F2-10-1 | DC PUMP CARTRIGE REMOVAL TOOL | 1 | |
| FTI-FTMRK-AC10-1 | REMOVAL TOOLING TRAY | 1 | |
| FY5-07384W09-01 | TOOL REMOVAL FLAP TRUNNION | 1 | |
| G27043-208 | TOOL - REMOVAL / INSTALL - TRIM ACTUATOR - ALTERNATE PART NUMBER : OHME65B80713-1 (RENTAL) | 6 | |
| G601R273301-1 | ANGLE OF ATTACK (AOA) TRANSDUCER INSTALLATION/REMOVAL TOOL | 2 | |
| G601R273301−1 | Angle of Attack Transducer − Removal/Installation Tool | 2 | |
| G601R274202-1 | TOOL, REMOVAL (A.O.A. TRANSDUCER) | 8 | |
| GS15574-1 | EXTRACTOR (SEAL INSTALLATION AND REMOVAL TOOL) | 18 | |
| GS21294-1 | SPINNER REMOVAL TOOL - HAMILTON SUNDSTRAND | 12 | |
| GS23485-2 | Transfer Tube Removal Tool | 24 | |
| H3056 | ATR BOOSTER PUMP REMOVAL TOOL | 1 | |
| INSTALLATION REMOVAL LPT | INSTREMOVAL LPT BRAKET BEARING ASSY TOOL | 1 | |
| K28007-1 | REMOVAL AND INSTALLATION TOOL-FUEL BOOST PUMP EXTERNAL POWER CONTROL UNIT | 6 | |
| K28008-1 | Removal tool-ground strap，fuel quantity data concentrator（FQDC） | 4 | |
| K52034-1 | WEIGHT COMPENSATION TOOL - HOLD-UP ROD, REMOVAL/ INSTALLATION, PASSENGER ENTRY DOOR | 4 | |
| L32 | EXTENSION,SOCKET WRENCH;BOTH ENDS 0.750";1ST END INTERNAL SQUARE#2ND END EXTERNAL SQUARE; STEEL;RIGID;|2.90" MIN AND 4.12" MAX;1.000" MAX;MANUAL TOOL;PLASTICS REMOVAL IN THE MARINE ENVIRONMENT (PRIME) PRODUCT; CHROMIUM;PROFESSIONAL/INDUSTRI | 4 | |
| M81969-14-11 | INSTALLING -REMOVAL TOOL- PLASTIC (RED/WHITE EXTRACTOR) | 30 | |
| M81969-1401 | REMOVAL/ASSEMBLY TOOL FOR ELECTRICAL PINS | 40 | |
| M81969-1403 | REMOVAL/ASSEMBLY TOOL FOR ELECTRICAL PINS | 34 | |
| M81969/1-01 | EXTRACTION, REMOVAL & INSERTION TOOLS INSERTION/EXTRAСTION SIZE 22 | 23 | |
| M81969/1-02 | PINREMOVAL/EXTRACTION TOOL | 30 | |
| M81969/14-03 | REMOVAL / INSTALLING M81969/14-03 ASTRO TOOL CORP | | 34 | |
| M81969/19-09 | EXTRACTION, REMOVAL & INSERTION TOOLS REMOVAL TOOL M81969/19-09 | 5 | |
| M81969/46 12 | INSERTION/EXT. TOOL/REMOVAL (STRAIGHT) TOOL | 1 | |
| ME65B18231 | TOOL - INSTALLATION/REMOVAL, BULKHEAD AND RESTRICTOR, BODY LANDING GEAR STRUT | 1 | |
| ME65B18231-1 | Tool-instl/removal bulkhd & restrictor BLG strut | 1 | |
| ME65B18260 | TOOL INSTALLATION/REMOVAL - UPPER BULKHEAD, WING LANDING GEAR STRUT | 1 | |
| MIT161T1120MLG | MISC TOOL 767-200/-300 ONLY (FOR C-CHEK) - BUSHING REMOVAL/INSTALL/HONING MLG INNER CYL FORK AND TRUCK BEAM | 1 | |
| MIT65B05315 | TOOL - INSTALLATION/REMOVAL UPPER BULKHEAD, WING LANDING GEAR STRUT | 1 | |
| MIT65B60146 | TOOL - REMOVAL, BALL TRANSFER | 5 | |
| MITSM112T5435 | MISCELLANEOUS TOOL STRUT BUSHING INSTALLATION AND REMOVAL TOOLING | 1 | |
| MS81969/1-2 | PINREMOVAL/EXTRACTION TOOL | 1 | |
| MS90456-0 | REMOVAL TOOL DRK56-0 TRAIN | 2 | |
| PBFT20 | HD WIDE TRIM REMOVAL PRY TOOL | 1 | |
| PWC31260 | Removal tool Extractor | 1 | |
| RABT-2B | Trim Pad Removal Tool | 1 | |
| RABT-6U | Door Upholstry Removal Tool | 1 | |
| RB T101731 | Bearing Install Or Removal Lower Plntry Assembly Tool Set | 1 | |
| RB T103106 | Main Transmission Bearing Install/Removal Tool | 1 | |
| RB T103266-101 | Transmission Assembly Bearing Removal/Install Tool | 1 | |
| RBE2-10-1 | Fuel System Cartridge Removal Tool | 2 | |
| RBT18591 | Tail Rotor Trunnion Housing Removal And Install Tool | 2 | |
| RBT18805 | Tail Rotor Transmission Input Bearing Removal Tool | 1 | |
| RBW109-3401-64-107 | Engine To Transmission Drive Shaft Install/Removal Tool | 1 | |
| RBW6430G03331-8G | TR DUPLEX BEARING REMOVAL/INSTALLATION TOOL | 2 | |
| S/DEM1.0060 | REMOVAL TOOL (HYPERTRONICS) | 3 | |
| SBTR | STRETCH FIT REMOVAL TOOL | 1 | |
| SRM1015R | REMOVAL TOOL (MCKINNON INDUSTRIES) | 1 | |
| ST2220-3-14 | REMOVAL - WIRE / CONTACTS (16 GAGE) (ASTRO TOOL CORPORATION) | 1 | |
| ST921MB | STRAIGHT SLEEVE REMOVAL TOOL | 1 | |
| ST921MB-201-8 | TOOL, REMOVAL,SLEEVE,STR | 1 | |
| ST9999ART | AEROSTRIP REMOVAL TOOL | 3 | |
| T-7-5012-06/ AF | SLEEVE REMOVAL TOOL (PHOENIX CONTROLS AC) | 1 | |
| T101750-101 | FLAPPING BEARING REMOVAL TOOL SET TRM | 1 | |
| TM1040G002 | CENTRAL TIE BOLT NUT REMOVAL/INSTALLATION TOOL | 2 | |
| TM4735G001 | ENGINE FREE WHEEL MAGNETIC SEAL - MAGNETIC SEAL STRICT REMOVAL INSTALLATION TOOL | 3 | |
| DRT68842 | BELLCRANK RESTRAINT,TOOL,REMOVAL OF THE | 9 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
