| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| J32069-11 | TORSION | 1 | |
| J32069-12 | TORSION | 1 | |
| J32069-13 | TORSION | 1 | |
| J32069-14 | TORSION | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) J32054-117 | Retainer EQPT - MLG/NLG Torsion Link (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J32054-92 | Retainer EQPT - MLG/NLG Torsion Link (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K32020-1 | Retainer equipment - MLG/NLG Torsion Link (CALIBRATION) (CALIBRATION) | 1 | |
| 0U132102 | DUMMY TORSION BAR | 1 | |
| 1-04967A | SPRING, TORSION | 1 | |
| 109-8101-57-105 | SPRING,HELICAL,TORSION | 1 | |
| 129-0041-31-105 | TORSION TUBE ASSY | 1 | |
| 161A1215-1 | NUT-DAMPER,TORSIONLINK APEX,MLG | 1 | |
| 162A1313-1 | NLG TORSION LINK LOWER | 1 | |
| 1SF4237-32-11I | GO NO GO UPPER TORSION LINK | 1 | |
| 206-310-004-103 | TENSION TORSION STRAP | 3 | |
| 20MIT65B01201-1 | SPANNER WRENCH - TORSION LINK NUT, WING LANDING GEAR AND BODY LANDING GEAR | 1 | |
| 2550179 | Fixture – Torsion | 1 | |
| 08161115 | 1441 TN 15-TN15 TORSION POWER BIT | 1 | |
| 08161120 | 1442 TN 20-TN20 TORSION POWER BIT | 1 | |
| 08161125 | 1443 TN 25-TN25 TORSION POWER BIT | 1 | |
| 08161130 | 1445 TN 30-TN 30 TORSION POWER BIT | 1 | |
| 08161140 | 1446 TN 40-TN 40 TORSION POWER BIT | 1 | |
| 10037171 | HOSE REEL SETS 5/8" X 50M ANTI TORSION | 1 | |
| 294208-1 | PULLER TORSION SHAFT | 1 | |
| 2ME65B00162 | MECHANICAL EQUIPMENT - TORSION LINK SUPPORT | 6 | |
| 3200TC14975 | Bushing Removal Kit-Upper Torsion Link | 1 | |
| 331A | DISTORSION ANALYSER | 1 | |
| 332A | DISTORSION ANALYSER | 1 | |
| 3G6205G26551 | MAIN LOWER ANTI-TORSION ARM BEARING | 1 | |
| 51C1102 | TORSION SPRING | 1 | |
| 51C1102-1 | TORSION SPRING | 1 | |
| 609A071005-00 | ANTI-TORSION SAFETY BOLT | 1 | |
| 65-46288-13 | TORSION LINK AY UP/LOW NLG | 1 | |
| 65C37823-3 | TORSION LINK PIN | 1 | |
| 6F6711G00131 | BLOCKING TOOL TORSION TUBE | 1 | |
| 728A15 | TORSION SPRING MODEL G -30 CHERRY RIVET | 1 | |
| 750687-6 | TORSION LINK HOLDING TOOL | 1 | |
| 750687PK | TORSION LINK HOLDING TOOL | 3 | |
| 8ME65B01202-1 | TORSION LINK HOLDING TOOL | 2 | |
| 8ME65B01202-3 | STRAP HOLD TORSION LINK MLG | 6 | |
| 91035-2 | MAIN LOWER ANTI-TORSION ARM BOLT | 1 | |
| 956A7644P80 | SPRING, TORSION | 1 | |
| 956A7644P81 | SPRING, TORSION | 1 | |
| 98L53809017001 | INST SUPPORT TORSION BOX | 1 | |
| A32054-92 | RETAINER EQUIPMENT - MLG /NLG TORSION LINK | 1 | |
| A32096-45 | TORSION LINK SHIM | 1 | |
| A579421360001-AT | CELL TORSION REAR CARRIAGE ALIGN. TOOL | 1 | |
| ACS76059 | STRAP ASSY, TORSION PRE LOAD | 4 | |
| AJ65B82215 | TORSION BAR WINDING TOOL - FORCE LIMITER ASSEMBLY | 1 | |
| AT-74276 | Bullet, Torsion Spring Retainer Assy. | 1 | |
| AT-74276 | Bullet, Torsion Spring Retainer Assembly | 1 | |
| AT55771 | GUIDE-BULLET, UPPER TORSION LINK | 1 | |
| AT55775 | GUIDE-BULLET, LOWER TORSION LINK | 1 | |
| AT55776 | GUIDE-BULLET, TORSION LINK APEX PIN | 1 | |
| AT55870 | TORQUE REACTOR, LOWER TORSION LINK | 1 | |
| C27072-191 | 5K Torsion Rod | 1 | |
| C27076-1 | ADAPTER - TORSION ROD INSTALLATION LE SLAT | 1 | |
| C27076-9 | Adapter -Torsion Rod Installation. Leading Edge Slat | 4 | |
| C32034-62 | Torsion Eube | 1 | |
| C642G3003101 | EXCHANGE LAMINATED TORSION BAR | 1 | |
| CH1057-078 | TORSION BAR UNLOADING EQUIPMENT | 1 | |
| CHA1057-078 | TORSION BAR UNLOAD EQUIPT | 1 | |
| CHA1057-078-1 | TORSION BAR UNLOADING EQUIPMENT | 1 | |
| CHA698-133 | TORSION BAR UNLOADING EQUIPMENT | 1 | |
| CHA700-366 | TORSION BAR UNLOADING TOOL | 1 | |
| CTS401R59-11 | Gauge - aileron torsion bar setting 12' (rigging) | 2 | |
| CTS401R59-9 | Gauge - aileron torsion bar setting 14' (rigging) | 1 | |
| D5757059100200 | SUPPORT ASSY-TORSION LH | 1 | |
| DX4739110 | SPRING, TORSION | 1 | |
| E-C642G3003101 | PULLER T/R TORSION STAR | 1 | |
| ETB1650A11 | TORSION SPRING | 1 | |
| F70312-36 | TORSION LINK APEX NUT,MLG | 4 | |
| F70312-45 | WRENCH - CROWFOOT, TORSION LINK APEX NUT | 5 | |
| F70319 | CLAMP SET -0 TORSION BAR, OUTBD COVE LIP DOORS | 1 | |
| F70319-1 | CLAMP SET, TORSION BAR, OUTBOARD COVE LIP DOOR | 1 | |
| F70322 | CLAMP SET -0 TORSION BAR, INBD COVE LIP DOOR TO | 1 | |
| F70322-1 | Clamp set torsion bar，inbd cove lip door | 2 | |
| F70322-1 | CLAMP SET, TORSION BAR, INBOARD COVE LIP DOOR | 2 | |
| F80192-1 | ADAPTER-TORSION TEST | 3 | |
| FB70-025-45226FB | Torsion Shear Pin | 1 | |
| FJ175-509 | TORSION SPRING KIT | 1 | |
| G32022 | TEST EQUIPMENT -0 TORSION LINE FREE PLAY CHECK, | 1 | |
| G32022-1 | TEST EQUIPMENT - TORSION LINK FREE PLAY CHECK, NOSE LANDING GEAR | 10 | |
| G32056-1 | STRAP HOLD TORSION LINK MLG | 8 | |
| G700-521114-1 | DOOR KIT PR LOAD TORSION TOOL | 2 | |
| GSE55999 | CONE-GUIDE,TORSION LINK WLG | 1 | |
| GSE56142 | GUIDE BULLET PIN,UPPER & LWR TORSION LINKS BODY LANDING GEAR | 2 | |
| GSE56143 | BULLET -GUIDE, TORSION LINK APEX PIN BLG | 2 | |
| HR26-12 | TORSION SPRING | 1 | |
| HS9147 | FIXTURE PRELOAD TORSION SPRING | 1 | |
| IN15EL | TORSION SPRING TESTER | 1 | |
| J32015-3 | CLAMP AROUND TORSION LINK | 1 | |
| J32048 | HANDLING EQPT. MLG TORSION LINKS | 1 | |
| J32048-1 | EQUIP.-HANDLING MLG TORSION LINKS | 1 | |
| J32048-25 | Handling Equipment - MLG Torsion Links | 1 | |
| J32048-27 | HANDLING MLG TORSION | 1 | |
| J32048-52 | HANDLING EQUIPMENT - MLG TORSION LINKS (CE) | 5 | |
| J32048-53 | HANDLING EQUIPMENT - MLG TORSION LINKS (CE) | 10 | |
| J32052 | BAR TORSION NLG | 1 | |
| J32052-1 | BAR - TORSION, NLG STEERING | 13 | |
| J32052-4 | BAR-EXTENSION-NLG-STEERING-TORSION-BAR | 1 | |
| J32054 | RETAINER EQPT. MLG/NLG TORSION LINK | 1 | |
| J32054-11 | RETAINER EQUIPMENT, MLG/NLG TORSION LINK | 1 | |
| J32054-116 | RETAINER EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR TORSION LINK | 7 | |
| J32054-117 | RETAINER EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR TORSION LINK | 7 | |
| J32054-50 | RETAINER EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR TORSION LINK | 7 | |
| J32054-51 | RETAINER EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR TORSION LINK | 11 | |
| J32054-52 | RETAINER EQUIPT-MLG/NLG TORSION LINK | 1 | |
| J32054-53 | RETAINER EQPT-MLG/NLG TORSION LINK | 1 | |
| J32054-61 | Retainer Assy - MLG/NLG Torsion Link | 4 | |
| J32054-9 | RETAINER EQUIPMENT, MLG/NLG TORSION LINK | 3 | |
| J32054-91 | RETAINER EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR TORSION LINK | 9 | |
| J32054-92 | RETAINER EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR TORSION LINK | 12 | |
| J32069-11 | TORSION LINK ASSEMBLY | 1 | |
| J32069-12 | TORSION LINK ASSEMBLY (OPPOSITE J32069-11) | 1 | |
| J32069-13 | TORSION LINK ASSEMBLY | 1 | |
| J32069-136 | TORSION LINK ASSEMBLY (OPPOSITE J32069-136) | 1 | |
| J32069-137 | Torsion link assy | 1 | |
| J32069-14 | TORSION LINK ASSEMBLY (OPPOSITE J32069-13 | 1 | |
| J32102-1 | Support assembly-mlg torsion link | 1 | |
| J47565 | NLG TORSION LINK WASHER EXTRACTOR | 16 | |
| K32020 | RETAINER EQUIPMENT - MLG / NLG TORSION LINK | 1 | |
| K32020-1 | RETAINER EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR TORSION LINK | 9 | |
| K32020-29 | RETAINER EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR TORSION LINK | 9 | |
| K530013-1 | TORSION SPRING LOCK- PRESSURE RELIEF DOOR | 1 | |
| K53013-1 | TORSION SPRING LOCK - PRESSURE RELIEF DOOR | 1 | |
| LORD204-310-101101 | TENSION TORSION STRAP ASSEMBLY | 2 | |
| MA280066-1 | TORSION SPRING PRELOAD KIT | 1 | |
| ME1C15 | SPRING, TORSION | 1 | |
| ME1C27 | DOUBLE TORSION SPRING | 1 | |
| ME1C38 | TORSION SPRING,LEFT | 1 | |
| ME1C39 | TORSION SPRING, RIGHT | 1 | |
| MIT65B13962 | ÚTIL TENSOR BARRA TORSIÓN TREN ALA A VIGA SUJECIÓN | 1 | |
| NAS77B4-028 | LOWER TORSION LINK ASSY BUSHING | 1 | |
| OTCCH-48809 | TORSION BAR TOOL | 1 | |
| QD1R200A | LLAVE DE TORSION | 2 | |
| R21820000 | SPRING TORSION TOOL | 6 | |
| RHR2-12 | TORSION SPRING | 1 | |
| SNX2LTJ15 | TORSION SPRING 1PC | 1 | |
| SPL-1853 | RETAINER EQUIPMENT, MLG/NLG TORSION LINK | 1 | |
| T307817 | TORSION BAR CLAMP FIXTURE | 1 | |
| UNK_201 | TORQUE DRIVER-TORSION 10 CM-KG | 1 | |
| WANCE MODEL ETT-502 | TORSION TESTING MACHINE | 1 | |
| WANCE MODEL HDT-T | SERVO HYDRAULIC TENSION TORSION | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
