| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 252-181 | TORQUE BAR | 4 | |
| 252-183-1 | TORQUE BAR | 1 | |
| 252-218 | TORQUE BAR | 1 | |
| A35229 | TORQUE BAR | 1 | |
| A37019 | TORQUE BAR | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 00432-700-000 | SHEAR PIN TORQUE TOW BAR (HYDRO) | 2 | |
| 101-00212 | TORQUE SYSTEM PRESSURE TESTER (WITH 0-100 INSP. GAGE) BARFIELD MODEL 2311-F | 9 | |
| 114-1252-AZL | TOOL FOR REMOVAL OF A BUSHING FROM A TORQUE BAR HOLE | 1 | |
| 114-1366 | TOOL FOR INSTALLATION AND REMOVAL OF A BUSHING IN A TORQUE BAR HOLE | 1 | |
| 114-1392 | TOOL FOR TORQUE BAR BUSHING INSTALLATION IN A TORQUE BAR HOLE | 1 | |
| 114-1668 | TORQUE BAR HOLE BUSHING REMOVAL AND INSTALLATION TOOL | 1 | |
| 114-1730 | TOOL TORQUE BAR GUIDE | 1 | |
| 114-221 | TORQUE BAR HOLE INSTALL AND REPAIR TOOL | 1 | |
| 114-332 | TOOL FOR INSTALLATIN OF A TORQUE BAR HOLE REPAIR BUSHING | 3 | |
| 13002 | WRENCH TORQUE, NORBAR, MODEL 5, 10-50 LBF-IN, 1/4 INCH DV FEMALE HEX | 3 | |
| 13438 | NORBAR TORQUE WRENCH 8-35 FT.LBF | 1 | |
| 13445 | NORBAR TORQUE WRENCH 45-220 FT.LBF | 1 | |
| 15003 | NORBAR TORQUE WRENCH 3/8 SD20-100NM | 1 | |
| 16092 | TORQUE MULTIPLIER HT 6/25 WITH AWUR VENDOR:NORBAR | 5 | |
| 21023 | TOOL-TORQUE TESTER (NORBAR 500) | 2 | |
| 130101 | Norbar 130101 - TW NORTORQUE MDL 60 3/8" SQ. DR. N.m/lbf.ft | 2 | |
| 130103 | Norbar 130103 - TW NORTORQUE MDL 100 1/2" SQ. DR. N.m/lbf.ft | 3 | |
| 130104 | Norbar 130104 - TW NORTORQUE MDL 200 1/2" SQ. DR. N.m/lbf.ft | 3 | |
| 130105 | Norbar 130105 - TW NORTORQUE MDL 300 1/2" SQ. DR. N.m/lbf.ft | 3 | |
| 130106 | Norbar 130106 - TW NORTORQUE MDL 340 1/2" SQ. DR. N.m/lbf.ft | 4 | |
| 130111 | Norbar 130111 - TW NORTORQUE MDL 60 3/8" SQ. DR. N.m ONLY | 1 | |
| 130113 | Norbar 130113 - TW NORTORQUE MDL 100 1/2" SQ. DR. N.m ONLY | 1 | |
| 130114 | Norbar 130114 - TW NORTORQUE MDL 200 1/2" SQ. DR. N.m ONLY | 1 | |
| 130115 | Norbar 130115 - TW NORTORQUE MDL 300 1/2" SQ. DR. N.m ONLY | 1 | |
| 130116 | Norbar 130116 - TW NORTORQUE MDL 340 1/2" SQ. DR. N.m ONLY | 1 | |
| 130121 | Norbar 130121 - TW NORTORQUE MDL 60 9X12 FEMALE END N.m/lbf.ft | 1 | |
| 130123 | Norbar 130123 - TW NORTORQUE MDL 100 9X12 FEMALE END N.m/lbf.ft | 1 | |
| 130125 | Norbar 130125 - TW NORTORQUE MDL 200 9X12 FEM. END N.m/lbf.ft | 1 | |
| 130126 | Norbar 130126 - TW NORTORQUE MDL 200 14X18 FEM. END N.m/lbf.ft | 1 | |
| 130127 | Norbar 130127 - TW NORTORQUE MDL 300 14X18 FEM. END N.m/lbf.ft | 1 | |
| 130128 | Norbar 130128 - TW NORTORQUE MDL 340 14X18 FEM. END N.m/lbf.ft | 1 | |
| 130131 | Norbar 130131 - TW NORTORQUE MDL 60 9X12 FEMALE END N.m ONLY | 1 | |
| 130133 | Norbar 130133 - TW NORTORQUE MDL 100 9X12 FEMALE END N.m ONLY | 1 | |
| 130135 | Norbar 130135 - TW NORTORQUE MDL 200 9X12 FEM. END N.m ONLY | 1 | |
| 130136 | Norbar 130136 - TW NORTORQUE MDL 200 14X18 FEM. END N.m ONLY | 1 | |
| 130137 | Norbar 130137 - TW NORTORQUE MDL 300 14X18 FEM. END N.m ONLY | 1 | |
| 130138 | Norbar 130138 - TW NORTORQUE MDL 340 14X18 FEM. END N.m ONLY | 1 | |
| 130141 | Norbar 130141 - TH NORTORQUE MDL 60 16mm SPIGOT N.m/lbf.ft | 1 | |
| 130142 | Norbar 130142 - TH NORTORQUE MDL 100 16mm SPIGOT N.m/lbf.ft | 1 | |
| 130143 | Norbar 130143 - TH NORTORQUE MDL 200 16mm SPIGOT N.m/lbf.ft | 1 | |
| 130144 | Norbar 130144 - TH NORTORQUE MDL 300 16mm SPIGOT N.m/lbf.ft | 1 | |
| 130161 | Norbar 130161 - TH NORTORQUE MDL 60 16mm SPIGOT N.m ONLY | 1 | |
| 130162 | Norbar 130162 - TH NORTORQUE MDL 100 16mm SPIGOT N.m ONLY | 1 | |
| 130163 | Norbar 130163 - TH NORTORQUE MDL 200 16mm SPIGOT N.m ONLY | 1 | |
| 130164 | Norbar 130164 - TH NORTORQUE MDL 300 16mm SPIGOT N.m ONLY | 1 | |
| 130178 | Norbar 130178 - TW TETHERED N'TORQUE MDL 100 1/2" SQ DR N.m/lbf.ft | 1 | |
| 130179 | Norbar 130179 - TW TETHERED N'TORQUE MDL 200 1/2" SQ DR N.m/lbf.ft | 1 | |
| 130180 | Norbar 130180 - TW TETHERED N'TORQUE MDL 300 1/2" SQ DR N.m/lbf.ft | 1 | |
| 14-1366 | TOOL FOR INSTALLATION AND REMOVAL OF A BUSHING IN A TORQUE BAR HOLE | 1 | |
| 215028 | Reaction Bar for MTM Torque Multiplier (380mm) | 1 | |
| 215031 | Reaction Bar for MTM Torque Multiplier (90 degree) | 1 | |
| 2311F | 4 ENGINE TORQUE CALIBRATION (BARFIELD) | 4 | |
| 2311FA | TORQUE SYSTEM PRESSURE TESTER (BARFIELD INC.) | 7 | |
| 252-181 | BAR TORQUE | 4 | |
| 252-181-1 | BAR TORQUE | 1 | |
| 252-218 | BAR TORQUE | 1 | |
| 3170018-1 | UPPER CABIN DOOR TORQUE BAR TOOL | 1 | |
| 4952434-501 | Adapter, Torque, Barrel Guide | 1 | |
| 4AR | Norbar Torque Wrench | 1 | |
| 5R | Norbar torque Wrench | 1 | |
| 6020NM | TORQUE WRENCH (NORBAR - RANGE (120.0-800.0) NM/(103.0-605.0) FT.1BS) | 1 | |
| 63-522 | TORQUE BAR NUT | 1 | |
| 6MIT65B82591 | TORQUE ADAPTER - BARREL NUT, NOSE GEAR STEERING ACTUATOR | 2 | |
| 7-362300019-601 | ADAPTER, TORQUE BARREL SUPPORT, 30MM | 1 | |
| 834745-2 | WRENCH , TORQUE BAR | 1 | |
| 834834-5 | TORQUE ADAPTER BAR | 1 | |
| 881600AT6 | BARRIER TORQUE BOCKET | 1 | |
| 98A28104029104 | TORQUE BAR ASSY | 1 | |
| A35228 | SPACER / TORQUE BAR | 1 | |
| C32020-1 | EXTENSION BAR, STEERING TEST - TORQUE | 15 | |
| C71040-37 | TORQUE EQUIPMENT, BREAKER BAR | 1 | |
| CS-295-AG137-C01-05 | C95 TOWBAR TORQUE SHEAR PIN | 1 | |
| G32066-6 | Torque Reaction Bar Assembly | 1 | |
| GA-185 | TORQUE MULTIPLIER X4 GEARED HEAD BAR REACTION 100 | 2 | |
| GA184A | TORQUE MULTIPLIER X4 GEARED HEAD, BAR REACTION, 1000 FT. LB. OUTPUT | 3 | |
| GA185 | TORQUE MULTIPLIER X4 GEARED HEAD BAR REACTION 100 | 2 | |
| M-1 | BLADE TORQUE BAR | 5 | |
| MODEL 2311FA | TORQUE SYSTEM PRESSURE TESTER (BARFIELD INC.) | 1 | |
| MTMB740 | TORQUE MULTIPLIER, 1/2" SQUARE INPUT,3/4" SQUARE OUTPUT, 740 FT-LB BAR | 2 | |
| NDB-555-1235E | TORQUE WRENCH NORBAR 200 | 1 | |
| NOR-15032 | NORBAR PRO 50 AUTOMOTIVE REVERSIBLE RATCHET TORQUE WRENCH 3/8" 90-440 | 1 | |
| NOR-15033 | NORBAR PRO 50 AUTOMOTIVE REVERSIBLE RATCHET TORQUE WRENCH 1/2" 90-440 | 1 | |
| PWC 37515-06 | TORQUEING BAR | 4 | |
| PWC37515-06 | TORQUE WRENCH BAR. | 4 | |
| PWC64231 | BAR TORQUE WRENCH | 3 | |
| Q46632 | TOOL FOR INSTALLATION OF A TORQUE BAR HOLE REPAIR BUSHING. | 5 | |
| QD4R600 | TORQUE WRENCH 3/4" DR, BREAKER BAR HEAD | 9 | |
| R46217 | TOOL - TORQUE BAR HOLE REPAIR BUSHING | 4 | |
| SPL-27 | Adapter - Torque, Hydralic Reservoir Barrel Guide | 1 | |
| T-71023 | Torque Adapter - Barrel gland nut | 1 | |
| T-71038 | Torque Adapter - Barrel gland nut | 1 | |
| T48942 | TOOL FOR INSTALLATION OF A TORQUE BAR HOLE REPAIR BUSHING | 1 | |
| YA391 | Torque Multiplier Geared Head Bar Reaction 1200 ft | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
