| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PWA 35925 | TOOL PLATE | 1 | |
| RBT103310-105 | TOOL PLATE | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 092E (SERIES) | TOOL BASE PLATE | 1 | |
| 109-0110-01-109E023A | TOOL ASSEMBLY, SWASHPLATE DUPLEX BEARING POSITIONING | 1 | |
| 109-3101-62-101 | TOOL, M/ROTOR GRIP PLATE SEAL INSTAL -109 (2 PZAS) | 1 | |
| 109-3110-07-1 | AGUSTA TOOL - RING, SWASHPLATE DUPLEX BEARING INSTL | 1 | |
| 109-3110-08-1 | AGUSTA TOOL - FIXTURE, SWASHPLATE SUPPORT | 1 | |
| 109-3130-01-121 | AGUSTA T/R - TOOL, TR, STATIC BALANCE - PLATE ASSY | 1 | |
| 109-3130-01-147 | TAIL ROTOR STATIC BALANCING TOOLS AND PLATE SUPPORT | 1 | |
| 109-3900-82-121 | SWASHPLATE TOOLSET - DIS-ASSY | 1 | |
| 109011001-109E023A | TOOL ASSY, SWASHPLATE DUPLEX BEARING POSITIONING | 1 | |
| 109011203103A561C | POSITIONING/ BONDING TOOL, METAL PLATES AND FIBERGLASS SHIMS BONDING PART | 1 | |
| 109G6220G03-101 | TOOL ASSY, SWASHPLATE DUPLEX BEARING POSITIONING | 1 | |
| 114-1000 | Tool that pushes the bushing out of or into the torque plate | 1 | |
| 114-1036 | TOOL THAT HOLDS THE TORQUE PLATE | 1 | |
| 114-1065 | Tool for removal/installation of torque plate bushing assembly | 2 | |
| 114-1101 | Holding tool for torque plate bushing removal/installation | 1 | |
| 114-1102 | Tool for Installation of Lock Plates on Bolts | 1 | |
| 114-1275 | PLATE INBD / OUTBD WHEEL TOOL | 3 | |
| 114-1560-1 | TOP PLATE - GREASE SEAL INSPECTION TOOL | 2 | |
| 114-1560-2 | BOTTOM PLATE - GREASE SEAL INSPECTION TOOL | 2 | |
| 114-1589-1 | TOP PLATE - TOOL FOR OUTER WHEEL GREASE SEAL INSPECTION | 2 | |
| 114-1589-2 | BOTTOM PLATE - TOOL FOR OUTER WHEEL GREASE SEAL INSPECTION | 2 | |
| 114-1597 | TOOL THAT HOLDS TORQUE PLATES (95A) WHEN BUSHINGS (90A) ARE INSTALLEDREMOVED | 1 | |
| 114-1598 | TOOL THAT PUSHES THE BUSHINGS (90A) OUT OF TORQUE PLATES (95A) | 1 | |
| 114-1610 | TOOL THAT HOLDS THE TORQUE PLATE WHEN THE BUSHING IS INSTALLED OR REMOVED | 1 | |
| 114-1611 | PUSHER TOOL FOR REMOVAL AND INSTALLATION OF THE BUSHING IN THE TORQUE PLATE | 2 | |
| 114-1611-AZL | PUSHER TOOL FOR REMOVAL AND INSTALLATION OF THE BUSHING IN THE TORQUE PLATE | 1 | |
| 114-1617 | TOP AND BOTTOM PLATES FOR THE GREASE SEAL INSPECTION TOOL | 1 | |
| 114-279 | TORQUE PLATE HOLDS TOOL BRAKE | 1 | |
| 114-369 | TOOL THAT PUSHES THE BUSHING IN OR OUT OF THE TORQUE PLATE | 1 | |
| 114-439 | TOOL, Cup installation plate | 1 | |
| 114-549 | TOOL FOR INSTALLATION OF LOCK PLATES ON BOLTS | 1 | |
| 114-802 | TOOL: CUP INSTALLATIONPLATE 145NW | 1 | |
| 139W00-542-00 | BENDING TOOL (FOR LOCKING PLATE OF ANTI-RATTLE NUT) | 1 | |
| 139W00-542-01 | HOLDING PLATE (FOR BENDING TOOL) | 1 | |
| 18193-10 | TOOL FOR THREADING HOLES NECESSARY FOR INSTALLATION OF HELICOIL INSERTS IN THE TORQUE PLATE | 3 | |
| 2-86160-807 | EMTEQ TEMPLATE TOOL | 1 | |
| 2586 | PLATE, SPECIAL TOOL | 1 | |
| 11654 | FNZ DRILL PLATE GUIDE TOOL | 1 | |
| 1901035 | DISENGAGEMENT PLATES ASSEMBLY TOOL | 1 | |
| 1901072 | EMP VALVE PLATE ALIGNMENT TOOL | 1 | |
| 2713629004-36 | POSITIONING TOOL, PLATE | 1 | |
| 287549-1 | POSITIONNING TOOL BUTTERFLY PLATE | 1 | |
| 2C6879P01 | Tool Template Fan Blade | 4 | |
| 2C90004G01 | SPECIAL TOOL - COOLING PLATE PULLER | 1 | |
| 2MIT2A264-0812-1 | ADAPTOR PLATE R&I TOOL, POTABLE WATER TANK | 5 | |
| 2MIT450Z3613 | 787 LOCATING TEMPLATE TOOL | 1 | |
| 330A93-2020-01 | TOOL,INSERTING BEARING SWASHPLATE | 1 | |
| 35-93346-0001 | DRILL HOLES TEMPLATE TOOL | 1 | |
| 350A93-3320-00 | BEARING SEAL/NON-ROTATING SWASHPLATE INSERTIONTOOL | 1 | |
| 350A93-3324-00 | NON-ROTATING SWASHPLATE /ROTATING SWASHPLATEINSERTION TOOL | 1 | |
| 350A93-3325-00 | BEARING SEAL/ NON-ROTATING SWASHPLATE EXTRACTIONTOOL | 1 | |
| 350A93-3710-00 | M/R Swashplate Bearing Tool | 3 | |
| 350A93-3712-00 | M/R Swashplate Bearing Tool | 2 | |
| 350A93-3713-00 | M/R Swashplate Bearing Tool | 2 | |
| 350A93-3714-00 | SWASH PLATE REMOVAL TOOL | 1 | |
| 350A93332300 | FITTING TOOL STAT./ROTAT PLATE | 1 | |
| 350A93332400 | EXTRACTOR TOOL STAT/ROTATING PLATE | 1 | |
| 350A93332500 | EXTRACTOR TOOL BEAR SEAL/STAT PLATE | 1 | |
| 350A94-2700-00 | FLIGHT CONTROL RIGGING TOOL -INCL. 7 DEGREE PLATE & PIN | 1 | |
| 350A94-2700-00/05 | Flight Control Rigging Tool-incl. 7 degree plate & pins | 1 | |
| 350A94-3700-00 | Swashplate Locking Tool Kit AS350 B3 | 1 | |
| 355A94-3745-01 | LOCKING TOOL, SWASPLATE | 1 | |
| 365A93-3111-01 | SWASH PLATE REMOVAL TOOL | 1 | |
| 369D29931 | TAIL ROTOR SWASHPLATE RIGGING TOOL | 1 | |
| 392254777528MD | MAIN ROTOR SWASHPLATE REGREASING TOOL | 1 | |
| 3A2983 | FLAPPER PLATE GASKET ASSEMBLY ALIGNMENT TOOL | 1 | |
| 3A2983-8 | ALIGMENT TOOL, FLAPPER PLATE GASKET ASSY | 1 | |
| 3A2983-9 | ALIGNMENT TOOL FLAPPER PLATE GASKET ASSY | 1 | |
| 3A5330G00131 | ANTI-TORQUE PLATE TOOL AND BUSHING SET | 1 | |
| 3G6200G01931 | AW139 SWASHPLATE ASSY TOOL KIT | 1 | |
| 3G6200G02031 | TOOL KIT, SWASHPLATE ASSEMBLY, CASE 1 | 1 | |
| 3G6205G11231 | TOOL KIT, SWASHPLATE ASSY ASSEMBLY | 1 | |
| 3G6205G13831 | TOOL KIT, SWASHPLATE | 1 | |
| 3G6205G15231 | TOOL KIT, SWASHPLATE ASSY | 1 | |
| 3G6205G15232 | TOOL KIT, SWASHPLATE ASSY, | 1 | |
| 3G633OA00532A005A | ANTI-TORQUE PLATE TOOL AND BUSHING SET | 1 | |
| 3G6705G06031 | AW139 SWASHPLATE ASSEMBLY TOOL KIT | 1 | |
| 40400TAAI3991320-21 | TEMPLATE TOOL | 1 | |
| 416-005 | NAMEPLATE SLEEVE EXPANSION TOOL | 1 | |
| 424630M0NT1-1 | SUPPORT PLATE TOOL | 1 | |
| 429-201-002-10 | SWASHPLATE RIGGING TOOL | 1 | |
| 429-201-002-101 | SWASHPLATE RIGGING TOOL | 1 | |
| 4920-99-665-7317 | SEAL PLATE REMOVAL/ INSTALLATION TOOLS | 1 | |
| 5163A43 | WRENCH SET:COMBINATION TYPE:RATCHETING BOX SIZE:3/8 INCH - 3/4 INCH OPEN SIZE:3/8INCH - 3/4INCH STYLE:12- POINT MATL:CHROME PLATED NUMBER OF PIECES:10 PIECES CONT:PLASTIC WRENCH:COMBINATION STANDARD SET IN INCHES TOOLS - HAND / POWER :STANDARD SET IN INCH | 1 | |
| 535-10 | TOOL FOR INSTALLATION OF HELICOIL INSERTS IN THE TORQUE PLATE | 2 | |
| 535-9 | TOOL FOR INSTALLATION OF HELICAL-COIL INSERTS IN THE TORQUE PLATE | 3 | |
| 558-1-05785 | NAMEPLATE CLAMPING TOOL | 1 | |
| 601R31-020K90 | KIT, DCU DUMMY PLATE TOOL | 1 | |
| 620-880-595-0 | TIGHTENING TOOL FOR IDENTIFICATION PLATE | 1 | |
| 650 | TOOL TO REMOVE LOCK PLATES | 5 | |
| 68101L9291110103 | CUTTING TEMPLATE TOOL | 1 | |
| 6F6230G05231 | TOOL KIT, SWASHPLATE ASSY | 1 | |
| 815526-1 | PLATE AFT TOOL | 1 | |
| 82700011-001-138 | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| 906 | Lock Plate Installation Tool | 4 | |
| 8546645 | IMMOBILIZER/INDEX PLATE, ANTI ROTATION TOOL | 1 | |
| 369029931 | TAIL ROTOR SWASHPLATE RIGGING TOOL | 1 | |
| 8007885100 | TOOL - TEMPLATE, CHECKING ASSEMBLY,BLADE EROSION | 1 | |
| 85517021-001-138 | TOOL-LEFT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 4 | |
| 85517021-002-138 | TOOL-RIGHT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 4 | |
| 856A2413G01 | TOOL,TEMPLATE FAN | 2 | |
| 856A2801 | TOOL: TOOL,BASEPLATE R/I | 5 | |
| 856A2801G03 | TOOL: TOOL,BASEPLATE R/I | 7 | |
| 856A3728G01 | TOOL - ENG SEALING PLATE & LOCK ADAP | 12 | |
| 85740007-S901-138 | TOOL-AILERON TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 85740007-S903-138 | TOOL-L/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| 85740007-S904-138 | TOOL-R/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| 85740009-S903-138 | TOOL-TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 85741000-001-138 | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 85741000-003-138 | TOOL-LEFT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 85741000-004-138 | TOOL-RIGHT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 87804014-101-76 | TRIMMING TEMPLATE TOOL | 1 | |
| 881-7-083-000 | SEAL PLATE REMOVAL/ INSTALLATION TOOLS | 1 | |
| 895-3101-19-101 | TOOL, M/ROTOR BLADE LAP PLATE BONDING | 1 | |
| 8G6230G01331 | TOOL KIT, SWASHPLATE ASSY ASSEMBLY | 1 | |
| 92700-10354-041 | MAIN ROTOR SWASHPLATE SUPPORT TOOL | 1 | |
| 9523467 | GRIP DRIVE TOOL AND BASE PLATE | 1 | |
| 98A54403024000 | ADAPTOR PLATE TOOL | 8 | |
| 98D32603000000 | SIMULATOR PLATE TOOL | 26 | |
| 98D52003002000 | TOOL-COVER PLATE PRE-CRUSHING | 15 | |
| 98F32304001000 | SIM. PLATE TOOL | 6 | |
| 98L57703000000 | TOOL SET,BRIDGE PLATE BEARING | 1 | |
| 98S76000006000 | TEMPLATE - HMU ADJUSTING TOOL | 3 | |
| 9R3422G01 | TEMPLATE, FORWARD FAN CASE (AXIAL MARKING TOOL) | 1 | |
| A1569-00 | PULL OUT TOOLING PLATE | 1 | |
| A24006-1 | B767 BATTERY HOIST PLATE TOOL | 5 | |
| A27117-1 | ANGLE ASSY PLATE / SPLINE DRIVE TOOL | 8 | |
| A300-SCUFF-PLATE | A300 SCUFF PLATE JIG TOOL | 1 | |
| A5794213400-ATK | PLATE AASSY SIDE ALIGN. TOOL KIT (8 IT) | 1 | |
| AC21826000-1 | RIVETING TOOL (PRESSURE PLATE) | 5 | |
| AC21866000 | TOOL FOR REMOVAL/INSTALLATION OF TORQUE PLATE BUSH | 3 | |
| AGE-03183-401 | TOOL, PLATE, ASSY | 1 | |
| AGE-03183-403 | TOOL, PLATE, ASSY | 1 | |
| AT55722 | Orifice nut and plate assembly tool | 1 | |
| AWM 1 LOCK | METRIC SET( ZINC PLATED) 11 TOOLS | 1 | |
| B49001-36 | B767 APU CONVERTER PLATES TOOL | 1 | |
| C00814100-LJIG02-0001 | TOOL - TEMPLATE, DOUBLER LOCATION | 1 | |
| C26942100-219 | TOOLING TOWER LOCATION PLATE | 1 | |
| C36008-2 | TOOL - BLANKING PLATES CFM SERIES | 6 | |
| C57007 | DISPATCH TOOL - COVER PLATE, WINGLET LOWER BLADE | 1 | |
| C57007 | Dispatch Tool - Cover Plate. Winglet Lower Blade | 1 | |
| C57007-1 | DISPATCH TOOL - COVER PLATE, WINGLET LOWER BLADE | 2 | |
| C57007-25 | DISPATCH TOOL - COVER PLATE, WINGLET LOWER BLADE | 5 | |
| C57007-36 | DISPATCH TOOL - COVER PLATE, WINGLET LOWER BLADE | 3 | |
| C623G6001101 | FIXING TOOL CYCLIC SWASHPLATE | 1 | |
| C632G3013101 | INSERTION TOOL FOR SWASHPLATE GUIDE SEAL | 1 | |
| C632G3031101 | INSERTION TOOL FOR SWASHPLATE GUIDE SEAL | 1 | |
| CABIN_ALT.SW-ADAPTOR | ALT SWITCH & ADAPTOR PLATE TOOL | 1 | |
| CDKB737-400 | AET737-11 FLOOR BEAM SUPPORT TOOLING,-12 CARGO DOOR LOWER JAMB TOOLING,-13 CARGO DOOR UPPER JAMB TOOLING, -14 CARGO DOOR LATCH JIG, -51 CDK DRILL TEMPLATE KIT | 1 | |
| CJMDX34-004 | TOOL KIT STATIC PLATE | 1 | |
| CJMDX34-004A | TOOL STATIC PLATE ADJSTMNT L | 4 | |
| CJMDX34-004B | TOOL STATIC PLATE ADJSTMNT R | 2 | |
| CSTL19725-4 | STATIC PLATE TOOL | 4 | |
| D-700-366HL | RIVETLESS NUTPLATE INSTALLATION TOOL | 1 | |
| D44-1426-1 | TOOL, ADAPTER PLATE HEIGHT | 1 | |
| D44-1426-1 (1400999-121) | 737 2KU Adapter Plate Inst Tool (gogo) (Set of 3) | 1 | |
| D44-1426-5 | (ADAPTER PLATE INSTALLATION TOOL) | 1 | |
| D97E00-606 | PLATE LOCKING TOOL | 1 | |
| DAH602622 | DOOR SELECTOR PLATE TOOL | 8 | |
| DCBN86130-02 | RIVETLESS NUTPLATE TOOLING | 1 | |
| DT1893AY | TOOL KIT RIVETLESS NUTPLATE INSTALLATION | 1 | |
| F26515000-1 | TOOL USED TO RIVET THE TORQUE BUTTONS AND THE END PLATE TO THE TORQUE PLATE | 3 | |
| F27294000 | STOP PLATE REMOVAL/INSTALLATION TOOL | 2 | |
| F27492000 | TOOL-PLATE | 1 | |
| F47116 | TOOL FOR SECURING THE LOCK PLATES OF THE JET LOCK-NUL | 1 | |
| Figure 512 | Torque Tube Backing Plate Out-Of-Flatness Check Tool | 1 | |
| G704B | TOOL - TO REMOVE RIVETLESS NUTPLATE PART NUMBER ABS1295K3-2B02. | 10 | |
| GALLEYTEMPLATE | GALLEY TEMPLATE TOOL | 1 | |
| GS20965-1 | TOOL PROP MOUNT ADAPTER PLATE | 5 | |
| GSB2712002 | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2712003 | TOOL-AILERON TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2712004 | TOOL-TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 3 | |
| GSB2712005 | TOOL-TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2712005| | TOOL-TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2712006 | TOOL-L/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2712007 | TOOL-R/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2715001 | TOOL-LEFT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 3 | |
| GSB2715002 | TOOL-RIGHT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| GSB2715003 | TOOL-LEFT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| GSB2715004 | TOOL-RIGHT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2715005 | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 4 | |
| GSB2733003 | AOA VANE TOOL - MYLAR TEMPLATE | 3 | |
| H21942 | REMOVAL TOOL FOR FRONT END PLATE SPSD BY H21984000 | 1 | |
| H21968 | REMOVAL TOOL FOR FRONT END PLATE SPSD BY | 12 | |
| H21984000 | REMOVAL TOOL FOR FRONT END PLATE | 2 | |
| HA-369-SPRG | Swahsplate Re-grease Tools | 1 | |
| HU45346 | LOCKPLATE INSTALLATION OR REMOVAL TOOL | 1 | |
| HU87112-1 | FIXTURE # CENTRALISING TOOLT RVT (LOCATOR-CENTRALIZE PLATE PIVOT DOOR) | 8 | |
| JACK-PLATE | JACK PLATE TOOL | 1 | |
| LMT−13444−1 | Rework Tools − Nut Plate & Washer | 1 | |
| M0NT27473 | TOOL FIXING PLATE | 1 | |
| M46196-100 | MOUNTING PLATE TOOL | 8 | |
| M46214-1000 | ADJUSTMENT TOOL WITH THE TEMPLATES (M46214-1, S47789 AND S47790) | 9 | |
| ME5102 | TOOL BASE PLATE | 1 | |
| O104463 | TOOL FOR RIVETING IDENTIFICATION PLATE | 1 | |
| PC26942100-219 | TOOLING TOWER LOCATING PLATE | 1 | |
| PER27452 | TOOL FOR COUNTERBORING SQUARE BRACKETS AND PLATE | 1 | |
| PWA 25574 | PLATE TOOL | 1 | |
| PWA 26120 | PLATESTG 2HPT TOOL | 2 | |
| PWA 26289 | PLATE TOOL | 2 | |
| PWA8642 | TOOL, ADAPTER PLATE | 1 | |
| PWC38268 | TEMPLATE VEDI TOOL P/N 98S76000004000 | 11 | |
| PWC66926 | TOOL PLATE COVER | 4 | |
| R721-4-60 | RIVETLESS NUT PLATE REMOVAL TOOL | 1 | |
| RB 92700-10354-041 | MAIN ROTOR SWASHPLATE SUPPORT TOOL | 2 | |
| RB T101291-103 | Swashplate Rigging Tool | 2 | |
| RB T103262-101 | RIGGING TOOL SWASHPLATE | 2 | |
| RB T103288-101 | Swashplate Rig Tool | 2 | |
| RB T103314-101 | Plate Lift Tool | 2 | |
| RB T103344-101 | Plate Set Tool | 2 | |
| RB92700-10354-041 | MAIN ROTOR SWASHPLATE SUPPORT TOOL | 2 | |
| RBD25148-80901 | Output Shaft Bearing Removal Tool (Plate Only) | 1 | |
| RBE350A93-3710-00 | Main Rotor Swashplate Bearing Tool | 2 | |
| RBE350A93-3712-00 | Main Rotor Swashplate Bearing Tool | 2 | |
| RBE350A94-3700- | SWASHPLATE IMMOBILIZING TOOLS ADJUSTMENT BRACE | 1 | |
| RBE350A94-3700-00 | Swashplate Immobilizing Tools | 2 | |
| RBE350A94-3700-A | Swashplate Immobilizing Tools Long Brace & Parts | 2 | |
| RBE350A94-3700-B | Swashplate Immobilizing Tool, Short Brace Assembly | 2 | |
| RBE350A94-3700-C | Swashplate Immobilizing Tools Adjustable Brace | 1 | |
| RBIR7028 | Swashplate Bearing Install and Removal Tool | 2 | |
| RBT 18013 | SWASHPLATE SUPPORT TOOL | 2 | |
| RBT18600 | Main Rotor Swashplate ReGreasing Tool | 1 | |
| RBT18601 | Main Rotor Swashplate ReGreasing Tool | 3 | |
| RBT18604 | Tail Rotor Swashplate Bearing ReGrease Tool | 3 | |
| RBT400227 | Swashplate Rigging Tool (407-201-300-101) | 2 | |
| RBT400354 | ALIGNMENT TOOLS SWASHPLATE | 3 | |
| RBW109-3110-10-101 | Swashplate Positioning Tool | 1 | |
| RBW6205G11231-3G | AW139 Swashplate Assembly Tool Kit | 2 | |
| RBW6205G11331-3G | Tool Swashplate Friction Checking | 2 | |
| RBW6205G13831-3G | TOOL KIT, SWASHPLATE | 2 | |
| RBW6205G15231-3G | TOOL KIT, SWASHPLATE ASSY | 2 | |
| RBW6205G15231-3G-3G | TOOL KIT, SWASHPLATE ASSY ASSEMBLY | 1 | |
| RRT051205 | LOADING TOOL - RETAIN RIM COVERPLATE LOCKING RING | 1 | |
| RRT051208 | LIFT TOOL- LIFT SEALPLATE TO HP TURBINE DISC | 1 | |
| RRT063161 | CUTTING TOOL - LOCK PLATES | 1 | |
| S-PLATE | SURFACE PLATE TOOL | 1 | |
| SK34477-101 | TOOL NET POCKET FRAME HOLE TEMPLATE | 1 | |
| SK34477-103 | TOOL NET POCKET FRAME HOLE TEMPLATE | 1 | |
| SLS-200-013-001 | SWASHPLATE RIGGING TOOL | 1 | |
| ST62885 | TEMPLATE (SUNDSTRAND TOOL) | 1 | |
| SURFACE-TABLE | SURFACE PLATE TOOL | 1 | |
| T-0054 | SWASHPLATE DOGLEG ALIGNMENT TOOL | 1 | |
| T-4148-2 | PLATES FOR TOOL GS25565-1 | 1 | |
| T-TANK-ADAPTOR-PLATE | TOILET TANK ADAPTOR PLATE TOOL | 1 | |
| T101291-102 | SWASHPLATE RIGGING TOOL | 1 | |
| T101291-103 | SWASHPLATE RIGGING TOOL | 1 | |
| T103262-101 | RIGGING TOOL SWASHPLATE | 1 | |
| T103288-101 | SWASHPLATE RIG TOOL | 1 | |
| T103310-103 | Plate Tool | 1 | |
| T103314-101 | PLATE LIFT TOOL | 1 | |
| T103344-101 | PLATE SET TOOL | 1 | |
| TOILETTANK | TOILET TANK CLEANING PLATE TOOL | 1 | |
| U8800581 | SPECIAL TOOLS (1) USE A NONCONDUCTIVE STRAIGHTEDGE DURING CALIBRATION AND THE INSPECTION (FOR SCAN ROWS 1 AND 4). (2) USE A CIRCLE TEMPLATE DURING THE INSPECTION TO DO SEMICIRCULAR SCANS AROUND THE RIVETS (FOR SCAN ROWS 2 AND 3). (S.NO: MGAT/NDT/001) | 1 | |
| USAG29 | NUT PLATE RIVET TOOL | 1 | |
| V2 | PH TOOL V2 (A4) CALIBRATION BLOCK, 12.5MM, 1018 STEEL, NICKEL PLATED | 2 | |
| WASTE-PLATE | A320/1 WASTE PLATE TOOL | 1 | |
| Z0104464 | Tool for riveting the bonding plate | 1 | |
| page 530 | Torque Tube Backing Plate Out-Of-Flatnessn check tool | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
