| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 010-0055 | TOOL - CRIMP TOOL | 1 | |
| 576782 | TOOL - CRIMP TOOL | 12 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) A40199 | BAND-IT CRIMPING TOOL (CALIBRATION) | 1 | |
| (CALIB) DMC899-2 | CRIMPING TOOL KIT-KABLO TAMIR KITI (CALIBRATION) | 1 | |
| (CALIB) M22520-5-01 | CRIMPING TOOL - POSITIONER (CALIBRATION) | 1 | |
| 0229-039-00 | POSITIONER FOR 15500-20 CRIMPING TOOL | 1 | |
| 047011-000 | TE Connectivity 047011-000 AD-1522 Crimping Tool | 1 | |
| 069H | DIE - CRIMP TOOL | 1 | |
| 0U144134 | CRIMPING-TOOL | 2 | |
| 0U144665 | CRIMPING-TOOL | 2 | |
| 0U144666 | CRIMPING-TOOL | 2 | |
| 0U145859 | TOOL-UNCRIMPING | 1 | |
| 0U146007 | TOOL-UNCRIMPING | 2 | |
| 0U146147 | TOOL-UNCRIMPING | 2 | |
| 1-1579004-2 | CSV10 CRIMPING HANDTOOL SOLARLOK 4-6 | 1 | |
| 1-1901611-1 | CERTI-CRIMP HAND TOOL ASSEMBLY | 1 | |
| 1-539634-9 | DIE FOR CRIMPING TOOL 69710-1 | 2 | |
| 1001-10 | Special Purpose Crimp Tool for M39029/4-111 and M39029/5-116 Contacts 16 AWG | 2 | |
| 10692 | CRIMP TOOL W/3 POS.(MS3191-1) | 3 | |
| 10692-1 | CRIMPING-TOOL | 1 | |
| 11-01-0065 | Hand Crimp Tool for Board-In Terminal, 16-18 AWG | 1 | |
| 11-01-0068 | Hand Crimp Tool for Board-In Terminal, 18-24 AWG | 1 | |
| 11-01-0088 | Hand Crimp Tool for Board-In Terminal, 22-24 AWG | 1 | |
| 11-01-0097 | Hand Crimp Tool for 2.36mm Diameter, Standard .093" Pin and Socket Crimp Terminal, 22-24 AWG | 1 | |
| 11-4152 | TOOL - CRIMPING | 1 | |
| 11210 | CRIMP TOOL, (MS3191-A) LARGE | 4 | |
| 112108-0002 | CHT DLT 28-32 CRIMP TOOL | 1 | |
| 11234 | CRIMP TOOL W/2 POS.(MS3191-2) | 1 | |
| 11766 | DIE T&B 11766 - USE CRIMP TOOL 13642 | 1 | |
| 11921 | CRIMP TOOL, MS (ST2220-1-Y) | 1 | |
| 0111604 | TOOL-CRIMPING | 1 | |
| 1213803-1 | TE Connectivity 1213803-1 Battery Powered Crimping Tool | 1 | |
| 1343-1 | Special Purpose Crimp Tool for M39029 Contacts 10-12 AWG, BIN 527, 528, 618, 624, 637, 649, 643, 655, 668, 675 | 2 | |
| 146STTKITDMC94 | Crimp tool set - special to type | 1 | |
| 1490749-1 | TE Connectivity 1490749-1 HYP10 8-40 AWG Hand Crimping Tool | 4 | |
| 16-0987 | PNEUMATIC CRIMPING TOOL (ICORE 16-0987) | 1 | |
| 16-803 | ICORE 16-803, HYDRAULIC/PNEUMATIC CRIMPING TOOL | 1 | |
| 169994-1 | CERTI-CRIMP HAND TOOLS POS.LOCK (NO DIE REQUIRED) | 10 | |
| 1804700-1 | CRIMPING TOOL - HYDRAULIC (10,000 PSI) | 3 | |
| 1901600-1 | TE Connectivity 1901600-1 Long CERTI-Crimp Hand Tool Assembly - 18-16 AWG | 5 | |
| 1901600-2 | TE Connectivity 1901600-2 Short CERTI-Crimp Hand Tool Assembly - 18-16 AWG | 4 | |
| 1901611-2 | CERTI-CRIMP II HAND TOOL | 7 | |
| 19279-0001 | AT-200™ Hand Held Pneumatic Tool, Without Crimp Dies | 1 | |
| 19285-0050 | TOOL - HAND CRIMPING | 1 | |
| 19294-0008 | Manual tool for Crimping non-insulated 8AWG thru 4/0 Terminals | 1 | |
| 19600 | CRIMP TOOL - BOLSTER SET | 3 | |
| 2063760-1 | SDE CERTI-CRIMP II HAND TOOL | 5 | |
| 2063857-1 | Certi - Crimp Tool | 2 | |
| 213H | DIE - CRIMP TOOL | 1 | |
| 213HLS | DIE - CRIMP TOOL | 1 | |
| 220009-1 | CRIMP TOOL AMP 220009-1 O0103 | 1 | |
| 220015-1 | CRIMPING TOOL-AMP | 14 | |
| 220015-3 | CRIMP TOOL AMP 220015-3 O0106 | 1 | |
| 220045-2 | CRIMP TOOL AMP 220045-2 P0202 | 5 | |
| 220045-3 | CRIMP TOOL AMP 220045-3 O0106 | 1 | |
| 220045-3 | CRIMP TOOL - TE (D A H T INC) | 1 | |
| 220189-3 | TE Connectivity 220189-3 BNC Crimping Die for Comm Tool | 1 | |
| 22520-5-01 | CRIMPING TOOL - POSITIONER | 1 | |
| 231648-1 | CRIMP TOOL AMP 231648-1 | 1 | |
| 2390879-1 | CRIMPERS / CRIMPING TOOLS SDE F JR PWR TMR 0.5-1.0MM2 ASSY | 1 | |
| 255HLS | DIE - CRIMP TOOL | 1 | |
| 2613-1 | Special Purpose Crimp Tool for ICP SXC-10, PXC-12 D Series Subminiature | 2 | |
| 2745-1 | 2745-1 (SPECIAL HAND CRIMP TOOL) | 2 | |
| 312-6341 | Crimping tool for non-insulated terminal | 1 | |
| 3120 CT | TOOL - HAND CRIMPING | 2 | |
| 3120CT | TOOL - HAND CRIMPING | 2 | |
| 314270-1 | DIE FOR CRIMP TOOL 189721-1 TERMINAL LUG | 1 | |
| 314979-1 | CRIMP TOOL - POWER, PNEUMATIC | 6 | |
| 318451-1 | CRIMP TOOL - TE (PROCRIMP) | 1 | |
| 356303-1 | HOLDER FOR CRIMP TOOL 189721-1 TERMINAL LUG | 2 | |
| 359-8103-010 | CRIMP TOOL - COLLINS | 1 | |
| 372-8092-010 | CRIMPINGTOOL90202-1/91516-1 | 1 | |
| 39-000 | Miniature Adjustable Crimp Tool M22520/34-01 for MIL-DTL-28840 Tooling | 2 | |
| 400B-HD | CRIMP TOOL PICO 400B-HD | 5 | |
| 409777-1 | TE Connectivity 409777-1 DAHT Crimping Tool | 1 | |
| 45061-3 | DIE-FOR CRIMPING TOOL | 3 | |
| 45062-3 | DIE-FOR CRIMPING TOOL 59500 | 3 | |
| 45063-3 | DIE-FOR CRIMPING TOOL 59500 | 5 | |
| 45064-3 | DIE-FOR CRIMPING TOOL 59500 | 2 | |
| 45065-3 | DIE-FOR CRIMPING TOOL 59500 | 2 | |
| 45066-3 | DIE-FOR CRIMPING TOOL 59500 | 4 | |
| 45216 | TOOL - CRIMP PLIERS | 7 | |
| 45219-2 | TOOL - CRIMP PLIERES | 5 | |
| 45219-2-ND | CRIMP TOOL - AMP (D.A.H.T. CES ECV-ECN 18-10) | 1 | |
| 45238-2 | DIE-FOR CRIMPING TOOL 59500 | 3 | |
| 45239-2 | DIE-FOR CRIMPING TOOL 59500 | 1 | |
| 45240-2 | DIE-FOR CRIMPING TOOL | 2 | |
| 45730 | TE Connectivity 45730 SADAHT PO INSUL STRATOTHERM Double-Action Hand Crimping Tool | 7 | |
| 460005224-4 | SWAGING-CRIMPING TOOL | 1 | |
| 46121 | TOOL HAND CRIMP PIDG 22-26 AWG TYCO | 9 | |
| 46447 | HAND CRIMPING TOOL/22-10 | 13 | |
| 46470 | TE Connectivity 46470 Single-Double Action Crimping Tool | 7 | |
| 46647 | CRIMP TOOL SIZE GAGE 16-22 | 1 | |
| 46673 | TOOL - CRIMP PLIERS | 13 | |
| 46673-1 | TE Connectivity 46673-1 STRATO-THERM Crimping Tool | 6 | |
| 46988 | CRIMP TOOL - LUG (INCLUDED IN CRIMP TOOL KIT G01P3, P/N 620175 (CT-4) CRIMP TOOL KIT DMC1264, P/N HX4. (TYCO ELECTRONICS CORP. (FORMERLY AMP, INC.)) | 20 | |
| 47043 | TOOL - CRIMP PLIERS | 1 | |
| 47386 | TE Connectivity 47386 CERTI-CRIMP Crimping Tool | 19 | |
| 47386-4 | CRIMP TOOL - RED | 3 | |
| 47820-21-22-23 | CRIMP DIES FOR 59974-1 TOOL | 1 | |
| 47907-1 | CRIMP TOOL AMP47907-1 | 8 | |
| 482930-1 | CRIMP TOOL AMP 482930-1 O0106 | 1 | |
| 484364-1 | AMP-HAND CRIMPING TOOL (67978.1) | 1 | |
| 500.620 | SINGLE-DIE, HEAVY-DUTY CRIMPING TOOL 16-120 MM2 6-4/0AWG | 1 | |
| 500.630 | Manual crimp tool f/power lugs, range 10 -150mm2 8AWG-250MCM | 1 | |
| 47387 | TOOL - CRIMP PLIERS (BLUE) | 13 | |
| 48087 | CRIMP TOOL - PURPLE | 1 | |
| 48183 | HEAD-CRIMPING PNEUMATIC TOOL | 3 | |
| 49935 | CRIMP TOOL - MOISTURE PROOF SPLICE | 14 | |
| 500D-1 | CRIMP TOOL PICO 500D-1 | 2 | |
| 543344-1 | CRIMP TOOL - TE (FERRULE CRIMPING TOOL) | 5 | |
| 571-2063857-1 | CRIMP TOOL 2063857-1 (656075-1) | 1 | |
| 571-69959 | HHHT AMPLI-BOND CRIMP TOOL | 1 | |
| 57118-5000 | Hand Crimp Tool, 20-24 AWG Wire | 1 | |
| 57119-5000 | Hand Crimp Tool, 18-22 AWG Wire | 1 | |
| 578001-5400 | Hand Crimp Tool - Straight Action | 1 | |
| 578016-5300 | Crimp Hand Tool - Straight Action | 1 | |
| 578021-5300 | Crimp Hand Tool - Straight Action | 1 | |
| 578021-5400 | Hand Crimp Tool - Straight Action | 1 | |
| 578034-5300 | Hand Crimp Tool - Straight Action | 1 | |
| 58006-00 | REMA CRIMPING TOOL, HP 50 DIE :69860-50 | 1 | |
| 58078-3 | CRIMP TOOL - AMP (TOOL FRAME W/OUT DIES) | 6 | |
| 58325-1 | CRIMP TOOL AMP 58325-1 O0105 | 1 | |
| 58433-3 | CRIMP TOOL - DINOSUAR AMP (PRO CR ASSY, RBY IS9252) | 6 | |
| 58433-3 | CRIMP TOOL - DINOSUAR AMP (PRO CR ASSY, RBY IS9252) | 6 | |
| 58495-1 | CRIMP TOOL - TE HT TYPE III | 5 | |
| 58517-3 | PRO-CRIMPER II TOOL W/DIE SET | 1 | |
| 58530-1 | AMP PRO-CRIMPER HAND TOOL II | 1 | |
| 58541-1 | PRO-CRIMPER HAND TOOL & DIE | 1 | |
| 58541-2 | PRO-CRIMPER HAND TOOL DIE | 1 | |
| 58548-1 | PRO-CRIMPER HAND TOOL & DIE | 1 | |
| 58551-1 | AMP PRO-CRIMPER HAND TOOL ASSY | 1 | |
| 58560-1 | PRO-CRIMP TOOL 10 POS MOD PLUG | 1 | |
| 58583–2 | HAND CRIMPING TOOL ASSEMBLY (PRO-CRIMPER LLL) | 1 | |
| 58603-1 | CRIMPING TOOL - HAND PLIER | 1 | |
| 58611-1 | PRO-CRIMP TOOL MQS REC | 1 | |
| 58612-1 | PRO-CRIMPER TOOL MT2 REC | 1 | |
| 58613-1 | PRO-CRIMP TOOL JPT REC | 1 | |
| 58649-2 | PRO-CRIMPER HAND TOOL & DIE | 1 | |
| 59239-4 | TOOL - CRIMP PLIERS YELLOW | 24 | |
| 8465 | CRIMPING-TOOL MS 3191-1L | 1 | |
| 59250 | CRIMPING TOOL AMP T-HEAD 59250 | 18 | |
| 59275 | CRIMP TOOL T-HEAD 26-22AWG | 13 | |
| 59294 | TERMINAL CRIMP TOOL-HI TEMP | 4 | |
| 59300 | TE Connectivity 59300 AMP Red-Blue-Yellow Terminal Crimp Tool Head | 1 | |
| 59461 | TERMINAL CRIMP TOOL-HI TEMP | 14 | |
| 169400 | AMP TOOL CRIMP Certi-lok inc 169404 | 8 | |
| 169404 | CRIMP TOOL DIE, FOR CERTI-LOK SERIES 169400 HAND CRIMP TOOL | 6 | |
| 300430 | CRIMP TOOL - NEST/ INSERT | 1 | |
| 316007 | CUTTING, CRIMPING AND SWAGING TOOL - 3 HOLE | 1 | |
| 525690 | TOOL - CRIMP PLIERS (RED) | 6 | |
| 525693 | TOOL - CRIMP PLIERS | 3 | |
| 575025 | CRIMP TOOL - RED | 1 | |
| 575091 | TOOL - CRIMPING TOOL | 3 | |
| 576778 | TOOL - CRIMP PLIERS | 9 | |
| 576779 | TOOL - CRIMP PLIERS | 13 | |
| 576780 | TOOL - CRIMP PLIERS | 10 | |
| 576781 | TE Connectivity 576781 PIDG STRATO-THERM Crimping Tool | 11 | |
| 576782 | TE Connectivity 576782 PIDG STRATO-THERM Crimping Tool | 12 | |
| 576783 | TE Connectivity 576783 PIDG STRATO-THERM Crimping Tool | 5 | |
| 576784 | TE Connectivity 576784 PIDG STRATO-THERM Crimping Tool | 12 | |
| 600850 | ROTO-CRIMP TOOL (ASI) | 1 | |
| 601075 | BANTAM ROTA-CRIMP TOOL | 4 | |
| 612179 | CRIMP TOOL, LARGE (MS3191-4) | 2 | |
| 612596 | CRIMP TOOL (MS3198-1)MINI 8STEP | 1 | |
| 612648 | CRIMP TOOL, CHS (M22910/7-1) | 2 | |
| 613214 | CRIMP TOOL, CHM POP-IN DIE | 1 | |
| 615708 | CRIMPING-TOOL | 1 | |
| 615709 | CRIMPING-TOOL | 1 | |
| 615717 | CRIMP TOOL (M22520/2-01) MINI | 1 | |
| 616336 | CRIMP TOOL (M22520/7-01) MINI | 1 | |
| 620175 | CRIMP TOOL (M22520/5-01) | 1 | |
| 620215 | CRIMP TOOL (M22520/10-01) | 1 | |
| 621122 | CRIMP TOOL,CHM,45-48221 W/621121 | 1 | |
| 621221 | CRIMP TOOL,NO RCHT-W/631017- OWENS ONLY | 1 | |
| 621375 | CRIMP TOOL, LARGE, MICRO-ADJ. QUAD IND | 1 | |
| 200181900 | TOOL HAND CRIMPER 26-32AWG SIDE | 1 | |
| 460005225 | SWAGING-CRIMPING TOOL | 1 | |
| 526389815 | Crimp Tool - (PN: M8ND) | 1 | |
| 2947020620 | TOOL - CLIP CRIMP | 1 | |
| 4611025503 | CRIMPING-TOOL | 1 | |
| 59824-1 | TOOL-CRIMPING | 6 | |
| 59973-1 | CRIMP TOOL AMP 59973-1 | 8 | |
| 59974-1 | TE Connectivity 59974-1 Hydraulic Hand Crimping Tool | 13 | |
| 6-1579014-1 | ERGOCRIMP HAND TOOL MCON 0;75-1;0 SWS | 1 | |
| 6-1579014-2 | ERGOCRIMP HAND TOOL MCON 1;5-2;5 SWS | 1 | |
| 600850-1 | ROTA-CRIMP TOOL | 1 | |
| 601075-1 | BANTAM ROTA-CRIMP TOOL (ASI) | 1 | |
| 601966-1 | CRIMPING TOOL M22520/2-01 | 1 | |
| 601967-1 | CRIMPING TOOL M22520/1-01 | 1 | |
| 615466-3 | CRIMP TOOL, AN, CIRCULAR (.038-.039) | 1 | |
| 620329-20 | CRIMP TOOL (=10-589504-20) | 1 | |
| 620329-24P | CRIMP TOOL (=10-589504-24P) | 1 | |
| 620329-24S | CRIMP TOOL (=10-589504-24S) | 1 | |
| 620329-72P | CRIMP TOOL (=10-589504-72P) | 1 | |
| 620329-72S | CRIMP TOOL (=10-589504-72S) | 1 | |
| 620330-12 | CRIMP TOOL (=10-589503-12) | 1 | |
| 620330-13 | CRIMP TOOL (=10-589503-13) | 1 | |
| 620330-16 | CRIMP TOOL (=10-589503-16) | 1 | |
| 620330-20 | CRIMP TOOL (=10-589503-20) | 1 | |
| 621045SS | CRIMP TOOL, MFT EXT. ADJ (QUAD), D-2 | 1 | |
| 621267SS | CRIMP TOOL, LG. MICRO ADJ, SINGLE, D-2 | 1 | |
| 621379SS | CRIMP TOOL, LARGE MICRO-ADJUST, D-2 | 1 | |
| 621408SS | CRIMP TOOL, AN (D-2 QUAD) | 1 | |
| 62200-4400 | EVC MicroCross Ferrule Crimp Tool Kit for the 11-31-6356 Molex Arbor Press | 1 | |
| 62200-8900 | Manual Press for Micro-D Backshell Crimp Tool Kit, 9 Circuits | 1 | |
| 62200-9000 | Micro-D Backshell Crimp Tool Kit, 9 Circuits | 1 | |
| 622008900 | MANUAL PRESS FOR MICRO-D BACKSHELL CRIMP TOOL KIT, 9 CIRCUITS | 1 | |
| 62201-8000 | DVI MicroCross Ferule Crimp Tool Kit for the 11-31-6356 Molex Arbor Press | 1 | |
| 62201-9800 | Manual Press for Micro-D Backshell Crimp Tool Kit, 15 Circuits | 1 | |
| 62201-9900 | Micro-D Backshell Crimp Tool Kit, 15 Circuits | 1 | |
| 62202-0000 | Manual Press for Micro-D Backshell Crimp Tool Kit, 25 Circuits | 1 | |
| 62202-0100 | Micro-D Backshell Crimp Tool Kit, 25 Circuits | 1 | |
| 63811-1000 | Molex 63811-1000 Ratchet Crimping Tool | 2 | |
| 63811-2400 | Hand Crimp Tool, 14-16AWG | 1 | |
| 63811-2600 | Hand Crimp Tool, 18-22AWG | 1 | |
| 63811-2800 | CRIMP TOOL - MOLEX | 2 | |
| 63811-5900 | Hand Crimp Tool, 14-16AWG | 1 | |
| 63811-6000 | Hand Crimp Tool, 18-22AWG | 1 | |
| 63811-6900 | Hand Crimp Tool for Right Angle Board-In Crimp Terminals | 1 | |
| 63811-8700 | HAND CRIMP TOOL+Ã-Ã | 4 | |
| 63811-9700 | Hand Crimp Tool for CP 2.8 Receptacle 14-16 AWG Type TXL Wire and>1.00-2.00mm² Type ID & ID Wire with 2.80mm, CMC Wire Seal Receptacle | 1 | |
| 63811-9800 | Hand Crimp Tool for CP 2.8 Receptacle for 2.50-3.00mm Type ID and IR Wire with 2.80mm², CMC Wire Seal Receptacle | 1 | |
| 63811-9900 | Hand Crimp Tool for CP 2.8 Receptacle 12-10 AWG Type TXL Wire and>3.00-5.00mm² Type ID & ID Wire with 2.80mm², CMC Wire Seal Receptacle | 1 | |
| 63813-3200 | Extraction Tool for Compact Robot Connector Crimp Female Terminal for 18-28 AWG Wire | 1 | |
| 63813-3400 | Extractor Tool for 1.25mm Pitch Wire-to-Board Crimp Terminal | 1 | |
| 63813-3600 | Extractor Tool for Crimp Terminals for PT Bulb Socket 0.5-0.85mm² AWG and 2.00mm Bulb-Socket Earth Terminal | 1 | |
| 63813-3700 | Extractor Tool for 1.50mm Pitch Wire-to-Board Crimp Terminal | 1 | |
| 63819-0000 | Molex 63819-0000 Open Barrel Ratchet Crimping Tool | 10 | |
| 63819-0300 | Hand Crimp Tool for 1.25mm Pitch Crimp Terminals, 26-32 AWG Wire | 1 | |
| 63819-0400 | Hand Crimp Tool for 1.25mm Pitch Crimp Terminals, 26-32 AWG Wire | 1 | |
| 63819-0500 | Hand Crimp Tool for 2.00mm Pitch Terminal, 24-30 AWG | 1 | |
| 63819-0600 | Hand Crimp Tool for 1.80mm-Wide Crimp Terminals | 1 | |
| 63819-0700 | Hand Crimp Tool for 1.80mm-Wide Crimp Terminals | 1 | |
| 63819-0900 | Hand Crimp Tool for Male and Female Crimp Terminals, 16-24 AWG Wire | 2 | |
| 63819-1300 | Hand Crimp Tool for Standard 1.57mm Pin and Socket Crimp Terminals, 18-24 AWG | 9 | |
| 63819-1500 | Hand Crimp Tool for 1.00mm Wire-to-Board Crimp Terminal, 28-32 AWG Wire | 1 | |
| 63819-1700 | Hand Crimp Tool for 3.96mm Humpback with Anti-Fish Hook Crimp Terminals, 18 AWG Wire | 1 | |
| 63819-1800 | Hand Crimp Tool for Male and Female Crimp Terminals, 18-20 AWG Wire | 1 | |
| 63819-2200 | Hand Tool for Power Crimp Pin, 14-18 AWG Wire | 1 | |
| 63819-2300 | Hand Crimp Tool for 2.00mm Pitch Wire-to-Board Terminals | 1 | |
| 63819-2500 | Hand Crimp Tool for 2.00mm Crimp Terminals, 26-28 AWG | 1 | |
| 63819-2600 | Hand Crimp Tool for 2.00mm Crimp Terminals, 26-28 AWG | 1 | |
| 63819-2800 | Hand Crimp Tool for 2.00mm Pitch Wire-to-Board Crimp Terminals, 22-26 AWG Wire | 1 | |
| 63819-3400 | Hand Crimp Tool for CP 2.8 Receptacle 18-20 AWG Type TXL Wire and 0.50-0.75mm² Type ID & ID Wire with 2.80mm, CMC Wire Seal Receptacle | 1 | |
| 63819-3600 | Hand Tool for 3.96mm Crimp Terminals, 18-20 AWG Wire | 1 | |
| 63819-4200 | Hand Crimp Tool for Quick Disconnect, High Reliability Crimp Terminals (HRT), Female for 1.00-2.50mm² | 1 | |
| 63819-4300 | Hand Crimp Tool for Wire-to-Board Terminal, 28-30 AWG Wire for Loose Parts Only | 1 | |
| 63819-4400 | Hand Tool for 1.25mm Wire-to-Board Crimp Terminal, 26-28 AWG Wire | 2 | |
| 63819-4500 | Hand Crimp Tool for 1.75mm Wire-to-Board Crimp Terminal, 24-28 AWG | 1 | |
| 63819-4600 | Hand Crimp Tool for Wire-to-Board Terminal, 24-28 AWG Wire | 1 | |
| 63819-4700 | Hand Crimp Tool for OBD II 1.52mm Crimp Terminal, 0.30-0.50mm² and 20-22 AWG | 1 | |
| 63819-5200 | Hand Crimp Tool for 2.28mm Slip-On Receptacle | 1 | |
| 63819-5500 | Hand Crimp Tool for 14-18 AWG Male and Female Power Contact Terminals | 1 | |
| 63819-5600 | Hand Crimp Tool for 8-12 AWG Female Power Contact Terminals | 1 | |
| 63819-6900 | Hand Crimp Tool for Industry standard 1.78mm Tab Terminals, 24-26 AWG Wire | 1 | |
| 63819-7300 | Hand Crimp Tool for 6.35mm Tab Slip-On Receptacle Terminals | 1 | |
| 63819-7500 | Hand Crimp Tool for Wire-to-Wire and Wire-to-Board Terminals | 1 | |
| 63819-7600 | Hand Crimp Tool for Wire-to-Wire and Wire-to-Board Terminals | 1 | |
| 63819-7700 | Hand Crimp Tool for Wire-to-Wire and Wire-to-Board Terminals | 1 | |
| 63819-9900 | Hand Tool for Power Crimp Sockets, 14-18 AWG Wire | 1 | |
| 638190500D | HAND CRIMP TOOL FOR 2.00MM PITCH TERMINAL, 24-30A WG | 1 | |
| 63823-0900 | Hand Crimp Tool for 1.00mm Wire-to-Board Crimp Terminals | 1 | |
| 63823-3400 | Hand Crimp Tool for Wire-to-Board Terminals | 1 | |
| 63823-4800 | Hand Crimp Tool for 2.00mm Pitch Board-In Male Crimp Terminal | 1 | |
| 63823-4900 | Hand Crimp Tool for 2.00mm Pitch Board-In Crimp Terminals | 1 | |
| 63823-5100 | Hand Crimp Tool for 2.00mm Pitch Wire-to-Board Crimp Terminal | 2 | |
| 63823-5200 | Hand Crimp Tool for 2.50mm / 3.00mm Pitch Wire-to-Board Female Crimp Terminal | 1 | |
| 63823-5300 | Hand Crimp Tool for Wire-to-Wire and Wire-to-Board Terminals | 1 | |
| 63823-5400 | Hand Crimp Tool for Wire-to-Wire and Wire-to-Board Terminals | 1 | |
| 63823-5900 | Hand Crimp Tool for Wire-to-Board Crimp Terminals | 1 | |
| 63823-6100 | Hand Crimp Tool for Board-In Crimp Terminals | 1 | |
| 63823-6600 | Hand Crimp Tool for Board-In Crimp Terminals | 1 | |
| 63823-6800 | Hand Crimp Tool For 2.50mm Board-In Connector, Mini. Crimp Pin | 1 | |
| 63823-7500 | Hand Crimp Tool for 2.50mm Wire-to-Board Crimp Terminals | 1 | |
| 63823-7900 | Hand Crimp Tool for 2.50mm Board-In Crimp Terminals | 1 | |
| 63823-8200 | Hand Crimp Tool for Slip-on Female Crimp Terminals | 1 | |
| 63823-8270 | Modular Crimp Head for Hand Crimp Tool for Slip-on Female Crimp Terminals | 1 | |
| 63823-8300 | Hand Crimp Tool for 6.35mm Tab Slip-on Male Crimp Terminals | 1 | |
| 63823-8370 | Modular Crimp Head for Hand Crimp Tool for 6.35mm Tab Slip-on Male Crimp Terminals | 1 | |
| 63823-8400 | Hand Crimp Tool: for 2.79mm Slip-In Tab Quick Disconnect Terminal | 1 | |
| 63823-8500 | Hand Crimp Tool: for 2.79mm Slip-On Quick Disconnect Receptacle | 1 | |
| 63823-8700 | Hand Crimp Tool For 3.50 Wire-to-Wire Connector, Crimp Pin | 1 | |
| 63823-8800 | Hand Crimp Tool For 3.50 Wire-to-Wire Connector, Crimp Pin | 1 | |
| 63823-9800 | Hand Crimp Tool for 2.00mm Pitch Wire-to-Board Crimp Terminal | 1 | |
| 63825-1200 | Hand Crimp Tool for 1.50mm (.059") Pitch CLICK-Mate™ Wire-to-Board Crimp Terminal | 2 | |
| 63825-2500 | Hand Crimp Tool for 1.25mm (.049”) / 2.00mm (.078”) Wire-to-Board Crimp Terminal | 1 | |
| 63825-3300 | Hand Crimp Tool 1.25mm (.049”) / 2.00 (.078”) Wire-to-Board Crimp Terminal | 1 | |
| 63825-5000 | Hand Crimp Tool for 2.50mm Pitch Floating Wire-to-Board Plug Crimp Terminal | 1 | |
| 63825-5200 | Hand Crimp Tool for Board-In Crimp Terminals | 1 | |
| 63825-6900 | Hand Crimp Tool for Board-In Crimp Terminals | 1 | |
| 63825-7100 | Hand Crimp Tool for Mega-Fit™ Crimp Terminals | 1 | |
| 63825-7475 | Hand Crimp Tool for 250 Slip-in Receptacle Terminals | 1 | |
| 63825-8100 | Hand Crimp Tool For C-Grid III™ Female Crimp Terminals, 22-24AWG | 1 | |
| 63825-8200 | Hand Crimp Tool For C-Grid III™ Female Crimp Terminals, 26-28AWG | 1 | |
| 63825-9500 | Hand Crimp Tool .090" (23mm) Slip-on Receptacle Terminal | 1 | |
| 63825-9700 | Hand Crimp Tool for 1.50mm (.059") Pico-SPOX™ Crimp Terminals | 1 | |
| 63827-0800 | Hand Crimp Tool for 1.50mm Pitch Pico-Lock™ Crimp Terminals | 1 | |
| 63827-0900 | Hand Crimp Tool for Wire-to-Board Crimp Terminals | 1 | |
| 63827-1000 | Hand Crimp Tool for IllumiMate™ 1.25mm Wire-to-Board Crimp Terminals | 1 | |
| 63827-1300 | Hand Crimp Tool for Board-In Crimp Terminals | 1 | |
| 63827-1600 | Hand Tool for Super-Sabre Crimp Terminals | 1 | |
| 63827-1700 | Hand Tool for Super-Sabre Crimp Terminals | 1 | |
| 63827-2300 | Hand Crimp Tool for IllumiMate™ 1.25mm Wire-to-Board Crimp Terminals | 1 | |
| 63827-3000 | Hand Crimp Tool for SolderRight™ Board-In Terminals | 1 | |
| 63827-3100 | Hand Crimp Tool for SolderRight™ Board-In Terminals | 1 | |
| 63827-3200 | Hand Crimp Tool for SolderRight™ In-Board Terminals | 1 | |
| 63827-3300 | Hand Crimp Tool for SolderRight™ Board-In Terminals | 1 | |
| 63827-4600 | Hand Crimp Tool for 2.00mm (.079") Pitch Wire-to-Board Crimp Terminal | 1 | |
| 63827-4900 | Hand Crimp Tool for Mega-Fit™ Crimp Terminals | 2 | |
| 63827-5770 | TOOL HAND CRIMPER 28-30AWG SIDE | 1 | |
| 64001-7500 | Hand Crimp Tool for Butt Splice 10-12 AWG Wire | 1 | |
| 64003-7300 | Right Hand Crimp Tool for Female Non-Insulated Standard Quick Disconnects, 12-16 AWG Wire | 1 | |
| 64005-0100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0185 | Special Crimp Head Locator for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0190 | Special Crimp Head Locator for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0200 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0300 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0400 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0500 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0600 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0800 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0900 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-1100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-1800 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-1900 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-2100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-2300 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-2400 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-2500 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-2600 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-2800 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-3400 | Crimp Head for the AT-200™ Pneumatic Hand Tool, Crimp from Top | 1 | |
| 64005-3500 | Crimp Head for the AT-200™ Pneumatic Hand Tool, Crimp from Top | 1 | |
| 64005-3600 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-4100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-4300 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-4500 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-4600 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-4700 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-4900 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-5000 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-5100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-5200 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-5400 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-5500 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-5900 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-6300 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-6400 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-6600 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-6700 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-6800 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-0100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-0200 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-0400 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-0500 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-0800 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-1100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-1200 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-1300 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-3000 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-3100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-4300 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-4400 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-7100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-7200 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64016-0037 | ServiceGrade™ Hand Crimp Tool - Ratchet | 2 | |
| 64016-0038 | ServiceGrade™ Hand Crimp Tool - Ratchet | 1 | |
| 64016-0041 | ServiceGrade™ Hand Crimp Tool - Ratchet | 1 | |
| 64016-0042 | ServiceGrade™ Hand Crimp Tool - Ratchet | 1 | |
| 64016-0044 | ServiceGrade™ Hand Crimp Tool - Ratchet | 1 | |
| 654-BT-A-6185-BK | SPECIAL PURPOSE CRIMP TOOL FOR M39029 CONTACTS 10-12 AWG, BIN 527, 528, 618, 624, 637, 649, 643, 655 | 1 | |
| 654174-1 | CRIMPING TOOL - HAND PLIER | 8 | |
| 69066 | ASSEMBLY - HEAD/CYLINDER, CRIMPING TOOL (TYCO ELECTRONICS CORP. (FORMERLY AMP, INC.)) | 5 | |
| 660037 | GAGE-FOR A810-1 CRIMP TOOL | 1 | |
| 66380220 | CRIMP TOOL AWG 26-20, 20-16, 16-12 | 1 | |
| 681-01FD678-120 | BALL-END CRIMPING TOOL | 1 | |
| 69008-0956 | CRIMP TOOL - MOLEX | 2 | |
| 69008-1050 | Mini Reel Handtool-Ominigrid Contact Crimp Tool | 1 | |
| 69008-1051 | Mini Reel Handtool-Ominigrid Contact Crimp Tool | 1 | |
| 69061 | TE CONNECTIVITY 59974-1 HYDRAULIC HAND CRIMPING TOOL | 8 | |
| 69064 | CRIMP TOOL - POWER, PNEUMATIC | 2 | |
| 69120-2 | 220-230 VAC 50/60 HZ PORTABLE HYDRAULIC CRIMP TOOL | 5 | |
| 69272-1 | CRIMP TOOL - AMP (SAHT SPARE WIRE CAP .036 - .138) | 8 | |
| 69325-3 | CRIMP TOOL - POWER, PNEUMATIC | 1 | |
| 69363 | TOOL - CRIMPING TOOL | 8 | |
| 69646-0 | CRIMP TOOL - TE (HHHT COAXICON) | 1 | |
| 69692-1 | CRIMP TOOL AMP 69692-1 | 4 | |
| 69692-1-ND | TOOL HAND CRIMPER 20-26AWG SIDE | 1 | |
| 69693-1 | TOOL - CRIMPING PLIERS | 7 | |
| 69693-1-ND | TOOL HAND CRIMPER 14-18AWG SIDE | 1 | |
| 69710-1 | CRIMP TOOL - AMP (SAHT W/OUT DIES) | 13 | |
| 69710-1-E | CRIMP TOOL AMP 69710-1-E | 1 | |
| 69959 | HHHT AMPLI-BOND CRIMP TOOL | 4 | |
| 7-1197423-9 | TE Connectivity AD-1377-S Crimping Tool | 1 | |
| 734790-1 | CRIMPING TOOL - HAND PLIER | 1 | |
| 753898-1 | Crimping tool, DAHT 187 pos. lock MK-2 | 3 | |
| 782-1343 | CERTI-CRIMP II HAND RATCHETING CRIMP TOOL FOR MULTIMATE TYPE III+ CONTACTS, 0.2 → 1.25MM² WIRE | 1 | |
| 7821343 | TE CONNECTIVITY CERTI-CRIMP II HAND RATCHETING CRIMP TOOL FOR MULTIMATE TYPE III+ CONTACTS, 0.2 → 1. | 1 | |
| 817-325 | AMP CERTI-LOK CRIMP TOOL | 1 | |
| 8500000461 | CRIMPING TOOL CASE AWG 24-12 W/OUT | 1 | |
| 8500000561 | A350/380 AIRLINE SERVICE KIT - RENNSTEIG TOOLS (CRIMPING TOOL) | 1 | |
| 856A2404 | CRIMPING TOOL - DRAIN TUBE | 1 | |
| 856A3322G03 | TOOL CRIMPING-NO.5 BEARING NUT | 8 | |
| 90067-4 | CRIMP TOOL - TE (ASSY STR AHT) | 1 | |
| 90067-5 | CRIMP TOOL - TE (ASSY SAHT) | 1 | |
| 90131-4 | CRIMP TOOL AMP 90131-4 P0202 | 1 | |
| 90185-1 | CRIMP TOOL - PIDG FASTON | 3 | |
| 90204-4 | CRIMP TOOL - TE (SAHT F CRP 24-20) | 5 | |
| 90205-2 | CRIMP TOOL - TE (SAHT F CRP 28-26) | 1 | |
| 90277-1 | CRIMP TOOL - TE (HT TYPE III) | 1 | |
| 90296-2 | CRIMP TOOL - TE (S.A.H.T. ASSEMBLY) | 1 | |
| 90300-2 | CRIMP TOOL - TE (S.A.H.T. ASSEMBLY) | 5 | |
| 90302-1 | CRIMP TOOL - TE (SAHT AMPLIMITE 28-20) | 1 | |
| 90310-2 | CRIMP TOOL - TE (SAHT F CRIMP) | 1 | |
| 90314-1 | CRIMP TOOL - TE (SAHT) | 4 | |
| 90384-1 | TE Connectivity 90384-1 CPC-CERTI Crimping Tool | 1 | |
| 90390-3 | CRIMP TOOL AMP 90390-3 | 3 | |
| 90546-1 | TOOL - CRIMPING PLIERS | 6 | |
| 90800-1 | CRIMP TOOL AMP 90800-1 (FRAME 354940-1) | 2 | |
| 90869-1 | CRIMP TOOL - AMP (PROCRMP TL W/DIE COMM .062 P/S) | 1 | |
| 91387-1 | PRO-CRIMPER TOOL & DIE | 1 | |
| 91388-1 | PRO-CRIMPER TOOL & DIE | 1 | |
| 91504-1 | TE Connectivity 91504-1 CERTA-CRIMP Crimping Tool | 4 | |
| 91505-1 | TE Connectivity 91505-1 Type III Crimping Tool | 1 | |
| 91506-1 | TE Connectivity 91506-1 CERTICRIMP 2 SAHT UMNL Crimping Tool - 16-14 AWG | 1 | |
| 91507-1 | CRIMP TOOL 20-24AWG | 4 | |
| 91510-1 | CRIMP TOOL AMP 91510-1 (TRA - CX2053AV) | 5 | |
| 91522-1 | TOOL CRIMP 18-22WAG MINI UMNL | 11 | |
| 91523-1 | CRIMP TOOL - TE ASSY SAHT | 2 | |
| 947679-1 | CRIMP TOOL HE13/14 CRIMP-ON & SNAP-IN CONTACTS, 28 → 24 AWG WIRE SIZE | 1 | |
| 98A55309002000 | MILLER AND CRIMPER - TOOL | 1 | |
| 98D27508564000 | TOOL - MILLING/CRIMPING, FLAP BEARING | 1 | |
| 992008-000 | TE Connectivity 992008-000 AD-1377-S Crimping Tool | 2 | |
| A0010 | CRIMP TOOL NOSE TIE-DEX BAND | 1 | |
| A100 | CRIMP TOOL, 20-24 AWG | 3 | |
| A11078 | TOOL-CRIMPING | 1 | |
| A1122 | CRIMP TOOL, 22-26 AWG. | 1 | |
| A118 | CRIMP TOOL, SPECIAL PURPOSE, 22-24 AWG | 1 | |
| A125 | CRIMP TOOL, 20-24 AWG | 1 | |
| A126 | CRIMP TOOL, SPECIAL PURPOSE 16-20 AWG | 1 | |
| A150 | CRIMP TOOL, SPECIAL PURPOSE, 16-20 AWG | 1 | |
| A300 | CRIMP TOOL, SPECIAL PURPOSE 20-24 AWG | 1 | |
| A30498ND | TOOL TO CRIMP CONTACTS 794608-3 | 1 | |
| A320 | CRIMP TOOL, 20-24 AWG. | 1 | |
| A322-1 | CRIMP TOOL, 22-26 GAGE | 1 | |
| A40199 | BAND-IT CRIMPING TOOL | 6 | |
| A420M2 | CRIMP TOOL, 20-24 AWG. | 1 | |
| A422 | CRIMP TOOL, 22-26 AWG. | 1 | |
| A516 | CRIMP TOOL, 14-18 AWG | 1 | |
| A750-25 | CRIMP TOOL, 22-26 AWG. | 1 | |
| A785-2 | CRIMP TOOL, 28-32 AWG | 1 | |
| A810-3 | CRIMP TOOL, 30 AWG.-MICRODOT | 1 | |
| A824 | CRIMP TOOL, 24-28 GA. | 1 | |
| A826-1 | CRIMP TOOL, 7/38 AWG-MICRODOT | 1 | |
| AB20001-H47 | CRIMPING TOOL AMP 576778HEAVY HD HT, STRATO #24-#22 | 1 | |
| ABOT0501 | BATTERY POWERED CRIMP TOOL (M/5-01) | 1 | |
| ABOT0501-230 | BATTERY POWERED CRIMP TOOL (M/5-01) | 1 | |
| ABOT2026 | BATTERYCRIMP TOOL, INSUL TERM, 20-26 | 1 | |
| ABOT4001 | BATT PWRD CRIMP TOOL M/40-1-SEE NOTES | 1 | |
| ABOT4001-230 | BATTERY POWERED CRIMP TOOL (/40-01) | 1 | |
| ABOT4001-NB | BATTERY POWERED CRIMP TOOL M22440/40-1 | 1 | |
| ACT-LY | CRIMPING TOOL WITH QUICK-RELEASE JAWS (CRIMPER) | 1 | |
| AD-1377 | CRIMP TOOL - TE (MINISEAL CRIMP TOOL) | 16 | |
| AD-1377-S | (DMC ALT. PN: GMT232 M22520/37-01) CRIMP TOOL FOR AWG 26-20, AWG 20-16, AWG 16-12. | 4 | |
| AD-1520-1-CRIMP-TOOL-ASSY | AD-1520-1-CRIMP-TOOL-ASSY | 1 | |
| AD1377 | TE CONNECTIVITY 992008-000 AD-1377-S CRIMPING TOOL | 16 | |
| AF0449003 | CRIMPING TOOL AMP T-HEAD 59250 | 1 | |
| AF8 | CRIMP TOOL (M22520-1 | 14 | |
| AF8-TH1A | CRIMP TOOL WITH M22520/1-02 TURRET HEAD INCLUDED | 3 | |
| AFM-10 | Crimp Tool - 12 indents | 2 | |
| AFM10 | CRIMP TOOL DANIELS - AFM10 | 2 | |
| AFM8 | CRIMP TOOL - M22520/ | 14 | |
| AFMSP-10 | Special Purpose Crimp Tool - 300545-09# | 1 | |
| AFMSP-21 | Special Purpose Crimp Tool - 300545-07# | 1 | |
| AFMSP-6 | Special Purpose Crimp Tool - 300545-04# | 1 | |
| AFMSP-8 | Special Purpose Crimp Tool - 300545-03# | 1 | |
| AFMSP-9 | Special Purpose Crimp Tool - 300545-06# | 1 | |
| AMP20-18 | TOOL-CRIMPING | 1 | |
| AMT1701 | CRIMP TOOL (M22520/17-01) | 1 | |
| AMT1702 | CRIMP TOOL (M22520/17-02) | 1 | |
| AMT23B | CRIMP TOOL,PNEU.(M22440/23-1) | 1 | |
| AMT4001 | CRIMP TOOL - RED/BLUE DMC | 6 | |
| ASL439SS | CRIMP TOOL, SS, SLOTTED, LRG MICRO-ADJ | 1 | |
| ASL841SS | CRIMP TOOL, SS, SLOTTED, MINI MICRO-ADJ | 1 | |
| ASR12 | CRIMPING TOOL - B767 MLG | 1 | |
| ATS-18E | Stride Tool Milbar 18E Multi-Purpose Crimping Tool, Terminal, Hand | 1 | |
| ATT-16-00 | HAND CRIMP TOOL - SIZE 16 14-16 AWG | 1 | |
| BAT20-12T1651 | BATTERY-OPERATED 12-TON CRIMPER KIT OEM KLEIN TOOL | 1 | |
| BM327 | CRIMP TOOL - PYLE NATIONAL | 5 | |
| CAT-HT-281-2430-13 | SAMTEC CAT-HT-281-2430-13 HAND RATCHETING CRIMP TOOL FOR CC03M CONTACTS, CC03R CONTACTS | 1 | |
| CCTDM | CRIMPING TOOL (070051-0000) | 1 | |
| CMS-787 | KIT-CRIMP TOOL | 2 | |
| CMS787 | KIT - CRIMP TOOL | 2 | |
| CRIMPING TOOL - POSITIONER | CRIMPING TOOL - POSITIONER | 1 | |
| CT-1 | CRIMP TOOL (615717 M22520/2-01) | 3 | |
| CT-2 | CRIMP TOOL (615708 M22520/1-01) | 1 | |
| CT-72 | CRIMP TOOL (616336 M22520/7-01) | 1 | |
| CT100A | TOOL TERMINAL CRIMP 10-22AWG | 2 | |
| CT150-4C-MX19 | HAND CRIMP TOOL /20-22 AWG RECTANGULAR CONTACTS MX SERIES | 2 | |
| CT3224 | TOOL-CRIMPING | 1 | |
| CTL-1 | CRIMP TOOL - AMP (WITH DIE SET) | 2 | |
| DA76080 | Klenk Tools DA76080 Black Handle 6 Electrical Model Two-in-One Wire StripperCrimper Tool | 1 | |
| DANAF8 | CRIMP TOOL - M22520/1-01 | 1 | |
| DANAFM8 | CRIMP TOOL M22520/2-01 | 1 | |
| DBS-2100 | CRIMPING TOOL - DMC | 5 | |
| DCT4-101 | CRIMP TOOL - DMC | 4 | |
| DCT4-102 | Commercial Crimp Tool - R-B-Y INSUL. | 2 | |
| DCT4-104 | Commercial Crimp Tool - R/B/Y HEAT-N-SEAL | 2 | |
| DCT4-105 | Commercial Crimp Tool - NON-Insulated Terminals | 2 | |
| DCT4-106 | Commercial Crimp Tool - .042" Square / .128" Hex / .178" Hex | 2 | |
| DCT4-107 | Commercial Crimp Tool - .068" Hex / .178" Hex / .324" HEX | 2 | |
| DCT4-108 | Commercial Crimp Tool - .068" Hex / .213" Hex / .255" HEX | 2 | |
| DCT4-109 | Commercial Crimp Tool - .105" Hex / .128" Hex / .213" HEX | 2 | |
| DCT4-111 | Commercial Crimp Tool - .128 Hex | 2 | |
| DCT4-117 | Commercial Crimp Tool -.128" Hex / .178" Hex / .213" Hex / .255" Hex | 2 | |
| DCT4-119 | Commercial Crimp Tool - C / R / B - Terminals | 2 | |
| DCT4-120 | Commercial Crimp Tool - .255" Hex / .359" Hex | 2 | |
| DCT4-122 | Commercial Crimp Tool - B / R / SM Y Terminals | 2 | |
| DCT4-128 | Commercial Crimp Tool - Equivalent to Y322 | 2 | |
| DCT4-129 | Commercial Crimp Tool - Equivalent to Y516 | 2 | |
| DCT4-138 | Commercial Crimp Tool - .161" Hex / .264" Hex | 2 | |
| DCT4-142 | Commercial Crimp Tool - .079" Hex / .112" Hex / .142" Hex | 2 | |
| DCT4-144 | Commercial Crimp Tool - .290" Hex / .359" Hex | 2 | |
| DCT4-147 | Commercial Crimp Tool - .068" Hex / .100" Hex / .429" Hex | 2 | |
| DCT4-148 | Commercial Crimp Tool - .177" Hex / .268" Hex | 2 | |
| DCT4-151 | Commercial Crimp Tool - D-Subminiature | 2 | |
| DCT4-166 | Crimp Tool - Equivalent to Amphenol CTL-15 | 2 | |
| DCT4-169 | Crimp Tool - Equivalent to Amphenol CTL-8 | 2 | |
| DCT4-176 | Crimp Tool - .368 Hex - Equivalent to Y498 | 2 | |
| DCT4-183 | Commercial Crimp Tool - .339" HEX | 2 | |
| DCT4-187 | Commercial Crimp Tool - .215" Hex / .225" Hex / .235" Hex | 2 | |
| DCT4-191 | Crimp Tool - Based On TE 91909-1 | 2 | |
| DCTE4B | 1.5 Ton Battery-Powered Crimp Tool, 110VAC | 2 | |
| DCTE4C | 1.5 Ton Battery-Powered Crimp Tool, 110VAC | 1 | |
| DHCRF15 | TOOL - CRIMP PLIERS | 1 | |
| DLTFRPSKT3038 | PERMASWAGE KIT / CRIMPING TOOL (GF-01-00) | 6 | |
| DMC-M310 | CRIMP TOOL FOR PIN & SOCKET CONTACTS 8-16 AWG | 1 | |
| DMC1247 | DMC1247 - Hydraulic 5.5 Ton Crimping Tool Kit for Insulated Terminals & Splices | 2 | |
| DMC1264 | Kit - Crimp Tool, 737NG | 7 | |
| DMC1264-LT | CRIMP TOOL KIT - LES | 1 | |
| DMC1386 | AFM8 (M22520/2-01) Crimp Tool with Mil-Spec Positioners M22520/2-02 thru M22520/2-18 | 2 | |
| DMC1550 | DMC1550 - WA23 & Accessories Tool Kit for Terminal Crimping Size 8 through 0 AWG | 2 | |
| DMC502 | KIT - CRIMP TOOL, ELECTRICAL CONNECTORS - 757 | 6 | |
| DMC567 | KIT - CRIMP TOOL, ELECTRICAL CONNECTORS - 757 | 2 | |
| DMC67 | MIL-T-83507/17-01 CRIMP TOOL KIT | 3 | |
| DMC769 | DMC - WIRING SYSTEM MAMINTENANCE KIT - REPAIR SET - CRIMPING TOOL SET | 7 | |
| DMC820 | KIT-CRIMP TOOL, ELECTRICAL CONNECTORS | 1 | |
| DMC94 | CRIMP TOOL SET - SPECIAL TO TYPE | 1 | |
| DMC977 | KIT - CRIMP TOOL, ELECTRICAL/ELECTRONIC | 4 | |
| DNL HX4-501 | CRIMPING TOOL TERMINAL HAND W/Y5-01 DIE | 1 | |
| DRK105 | REMOVAL TOOL - CRIMP PIN | 7 | |
| ERE5067 | TOOL - CRIMPING, EXTEND-PROXIMITY SWITCH SENSOR | 1 | |
| ERG4001 | Sta-Kon ERG4001 RA, RB, RC Insulated Terminal Ergonomic Hand Crimping Tool | 1 | |
| F27446000 | TOOL-CRIMPING | 1 | |
| F27447000 | TOOL-TO CRIMP THE FUEL ASSY,MAINTAINING | 1 | |
| F27477000 | TOOL-FUSE ASSY CRIMPING | 1 | |
| FT8 | CRIMP TOOL - FT8 | 3 | |
| G01J3P3 | KIT, CRIMP TOOL - ELECTRICAL CONNECTOR REF FOUND IN STANDARD WIRE PRACTICES MANUAL (SWPM) (GRAPHIC DATAKITS INTERNATIONAL (6495 CORP.)) | 1 | |
| G01P3 | KIT, CRIMP TOOL - 737NG | 1 | |
| G01P3A | KIT, CRIMP TOOL - 737NG | 1 | |
| G01P3 | KIT - CRIMP TOOL, 737 | 1 | |
| G125 | GO-NO-GO TEST FOR CRIMP TOOL | 10 | |
| GMT 232 | AD-1377 CRIMP TOOL RAYCHEM | 15 | |
| GMT1005 | CRIMP TOOL - DMC | 4 | |
| GMT1006 | Commercial Crimp Tool - Comp. to TE 46447 | 2 | |
| GMT1090 | General Purpose Crimp Tool - Cold Applied Splice Tool | 2 | |
| GMT201 | Commercial Crimp Tool- Equiv to Molex HTR1031 | 2 | |
| GMT202 | Commercial Crimp Tool - Comp. to Molex HTR1719 | 2 | |
| GMT203 | Commercial Crimp Tool - Comp. to Molex HTR2445 | 2 | |
| GMT204 | Commercial Crimp Tool - Comp. to Molex HTR-2262 | 2 | |
| GMT206 | Commercial Crimp Tool - Comp. to ITT Cannon CCT-DL | 3 | |
| GMT208 | CRIMP TOOL-COMM | 4 | |
| GMT209 | Commercial Crimp Tool - Comp. to Elco 06-7852-01 | 2 | |
| GMT211 | GMT211 Commercial Crimp Tool - Comp. to Tyco 90131-2, 90204-1 | 2 | |
| GMT220 | GMT220 Commercial Crimp Tool - Comp. to AMP 90223, 90260 | 2 | |
| GMT221 | CRIMPING-TOOL | 6 | |
| GMT225 | Commercial Crimp Tool - Comp. to Tyco 90202 | 2 | |
| GMT226 | GMT226 Commercial Crimp Tool - Comp. to TE 58448-2 | 2 | |
| GMT230 | Commercial Crimp Tool - Comp. to Tyco 90340 | 2 | |
| GMT232 | CRIMP TOOL - M22520/ | 15 | |
| GMT241 | Commercial Crimp Tool - Tyco 90265-1 | 2 | |
| GMT245 | Commercial Crimp Tool - Tyco 90123/90124 | 2 | |
| GMT247 | Commercial Crimp Tool - Comp. to ITT Cannon CCT-D*C-1 | 2 | |
| GMT260 | Commercial Crimp Tool - Comp. to ITT Cannon CCT-DL3 | 2 | |
| GMT262 | Commercial Crimp Tool - Comp. to Tyco 90090-3 | 3 | |
| GMT263 | Commercial Crimp Tool - Comp. to Teradyne 600-0026-000 | 2 | |
| GMT277 | General Purpose Crimp Tool - M22520/38-01 | 2 | |
| GMT287 | Commercial Crimp Tool - ITT Cannon CCT-D*C-4 | 2 | |
| GMT295 | Commercial Crimp Tool - Comp. to Tyco 90289-1, 91533-1 | 2 | |
| GMT296 | Commercial Crimp Tool - Berg 47712-001 | 2 | |
| GMT302 | General Purpose Crimp Tool - ITT Cannon CCT-UBC | 2 | |
| GMT309 | General Purpose Crimp Tool - Amp Tyco Tool 144969-2 | 2 | |
| GMT337 | GMT337 General Purpose Crimp Tool - Insulation | 2 | |
| GMTE1005C | Battery Powered Crimp Tool for SOLISTRAND™ terminals and splices - Comp. to TE 49935 | 2 | |
| GMTE1006C | Battery-Powered General Purpose Crimp Tool for Strato-Therm Uninsulated Terminals - Comp. to TE 46447 | 2 | |
| GMTE232C | Battery Powered Crimp Tool for M81824 Series Environmental Splices - Comp. to Tyco AD1377 | 2 | |
| GMTE263C | Battery Powered Crimp Tool - Comp. to Teradyne 600-0026-000 | 2 | |
| GS100-1 | CRIMP TOOL - DMC | 5 | |
| GS200-1 | Circular Indent Crimp Tool - M22520/31-01 | 5 | |
| GS206 | Crimp Tool for Outer Shield Termination 0.258-0.262" | 2 | |
| GS208 | Crimp Tool for Outer Shield Termination 0.197-0.201" | 2 | |
| GS210 | Crimp Tool for Outer Shield Termination 0.042-0.046" | 2 | |
| GS212 | Crimp Tool for Outer Shield Termination 0.080-0.084" | 2 | |
| GS221 | Crimp Tool for Outer Shield Termination 0.093-0.097" | 5 | |
| GS222 | Crimp Tool for Outer Shield Termination 0.096-0.100" | 2 | |
| GS223 | Crimp Tool for Outer Shield Termination 0.124-0.128" | 2 | |
| GS225 | Crimp Tool for Outer Shield Termination 0.086-0.090" | 2 | |
| H-6E-B | CRIMP TOOL - HOLLINGSWORTH (12-10 Gauge Crimps FIT - FIIG) | 1 | |
| H20N | FEMALE NON-INUSLATED DIE SET – THIS IS A HOLLINGSWORTH CRIMP TOOL | 1 | |
| H621398 | 8 STEP CRIMP TOOL (HARTING M22520/2-01) | 1 | |
| HC136 | Manual Hydraulic Crimp Tool - 4 Point Die Less | 2 | |
| HCE136B | Battery Powered Hydraulic Crimp Tool - 4 Point Die Less | 1 | |
| HCE136C | Battery-Powered Hydraulic Crimp Tool - 4 Point Die Less | 2 | |
| HD120 | SINGLE-DIE, HEAVY-DUTY CRIMPING TOOL 16-120 MM2 6-4/0AWG | 2 | |
| HD23 | Manual Hydraulic 4 Indent Crimp Tool for 8-4/0 AWG | 2 | |
| HD36 | HYDRAULIC CRIMP TOOL - D36 DIES | 3 | |
| HDE23C | Battery-Powered Large Gauge 4 Indent Crimp Tool | 2 | |
| HDE36B | Battery Powered Crimp Tool - 4 Ton | 2 | |
| HDE36C | 4 Ton Battery-Powered Crimp Tool for Use with HD36 Dies | 1 | |
| HDE51C | 5.5 Ton Battery-Powered Form Crimp Tool for Use with HD51 Dies | 2 | |
| HDP-400 | CRIMP TOOL PICO 400B-HD | 1 | |
| HE13 | CRIMP TOOL HE13/14 CRIMP-ON & SNAP-IN CONTACTS, 28 → 24 AWG WIRE SIZE | 1 | |
| HTR1719C | TOOL - CRIMPING TOOL | 4 | |
| HU41447 & HU41448 | Fuel Crimp Tool....FEC 2030-1 & FEC 2030-2 | 1 | |
| HX-4 | CRIMPING TOOL - POSITIONER | 13 | |
| HX23 | Pneumatic Open Frame Crimp Tool - HX4 Equivalent | 2 | |
| HX3 | CRIMP TOOL - DMC (SMALL DIES) | 4 | |
| HX4 | CRIMP TOOL - M22520/ | 13 | |
| HX4-501 | CRIMPING TOOL TERMINAL HAND W/Y5-01 DIE | 1 | |
| HXE4AB | Battery Powered Open Frame Crimp Tool - 1.5 Ton | 1 | |
| HXE4AC | Battery Powered Open Frame Crimp Tool with a Pre-Tensioned Pushrod - 1.5 Ton | 2 | |
| HXE4B | Battery Powered Open Frame Crimp Tool - 1.5 Ton | 1 | |
| HXE4C | Battery-Powered Open Frame Crimp Tool - 1.5 Ton | 2 | |
| ICORE 19600 | ICORE CRIMP TOOL - BOLSTER SET | 1 | |
| IDL30-500 | 30-500 CRIMPMASTER CRIMP TOOL | 1 | |
| JPK4 | PLIERS KIT, JOURNEYMAN, 4 PIECE, INCLUDING 8" DIAGONAL CUTTER, 8" HD LONG-NOSE WITH SIDE CUTTER AND WIRE STRIPPER, 9" NE-STYLE SIDE CUTTER WITH CRIMPER AND 9" CABLE CUTTER, MAKE: KLEIN TOOLS | 1 | |
| K13-1 | Crimping tool terminal hand K13-1 | 13 | |
| K1860SE | Positioner, Ejector- Use MH999 Crimp Tool | 2 | |
| K1S | CRIMPING TOOL POSITIONER M22520/2-02 (MOUSER NO: 654-K1S) | 9 | |
| K42 | POSITIONER - CRIMPING TOOL | 10 | |
| K969SE | Positioner - Ejector Style - Use MH992 Crimp Tool | 2 | |
| K971S | Positioner - Use MH992 Crimp Tool | 2 | |
| KTH-1000 | CRIMP TOOL - WINCHESTER ELECTRONICS (KINGS) | 9 | |
| LH8 | CRIMP TOOL - DMC (BURNDY) | 8 | |
| M10S-1 | TOOL-CRIMPING | 4 | |
| M10S1 | CRIMP TOOL KIT - BURNDY | 4 | |
| M22520-1-01 | CRIMP TOOL - CONTACT DORE | 26 | |
| M22520-1-13 | CRIMPING TOOL - LOCATOR | 4 | |
| M22520-2-01 | CRIMPING TOOL - FRAME | 18 | |
| M22520-2-09 | POSITIONER - CRIMPING TOOL | 6 | |
| M22520-2-14 | POSITIONER - CRIMPING TOOL | 1 | |
| M22520-23-01 | CRIMPING HAND TOOL (FOR CONTACT SIZE 8 TO 4-0) | 5 | |
| M22520-3-2 | Military Specification M225203-2 Gage, Crimping Tool | 1 | |
| M22520-40-01 | CRIMP TOOL FOR MS25036-149 & MS25036-156 | 1 | |
| M22520-5-01 | CRIMPING TOOL - POSITIONER | 23 | |
| M22520-5-03 | CRIMPING TOOL - DIE | 3 | |
| M22520-5-11 | CRIMPING TOOL - LOCATOR | 2 | |
| M22520-7-01 | TOOL CRIMPING - MINUATURE ADJUST | 9 | |
| M22520/1-01 | CRIMP TOOL DANIELS AF8 M22520 / 1-01 | 26 | |
| M22520/1-02 | CRIMP TOOL TURRET HEAD (AMP 601967-2) | 18 | |
| M22520/1-05 | UNIVERSAL POSITIONER FOR CRIMP TOOL UH2-5 | 9 | |
| M22520/2-01 | TOOL-CRIMPING | 18 | |
| M22520/2-06 | DMC AFM8 CRIMP TOOL, CRIMP QUALIFIED TO M22520/2-01, WIRE RANGE 32-20 AWG | 10 | |
| M22520/2-08 | CRIMPING TOOL M22520/2-08 | 9 | |
| M22520/2-09 | POSITIONER - CRIMPING TOOL | 6 | |
| M22520/2-23 | CRIMPING TOOL M22520/2-23 | 6 | |
| M22520/23-01 | CRIMPING HAND TOOL (FOR CONTACT SIZE 8 TO 4-0) | 5 | |
| M22520/23-02 | DIESET-SIZE 8 ( FOR CRIMP TOOL M22520/23-01) | 6 | |
| M22520/24-01 | CRIMP TOOL - USE OEM P/N : WT110M | 1 | |
| M22520/37-01 | AD-1377 CRIMP TOOL (RAYCHEM) | 7 | |
| M22520/5-01 | CRIMPING TOOL M22520/5-01 | 23 | |
| M22520/5-03 | CRIMPING TOOL - DIE | 3 | |
| M22520/5-11 | CRIMPING TOOL - LOCATOR | 2 | |
| M22520/7-01 | Crimping Tool - BM 526389608 | 9 | |
| M22520/7-01 MH860 | CRIMP TOOL M22520/7-01 | 1 | |
| M22520_37-01 | CRIMP TOOL M22520/37-01 SPLICE | 7 | |
| M2700B | CRIMPING-TOOL | 1 | |
| M300-25A | Crimp Tool for Amphenol-Sine Starline Pin & Socket Contacts 10-18 AWG | 2 | |
| M300BT | Crimp Tool for Pin & Socket Contacts 6-14 AWG | 2 | |
| M305 | 4/8 Indent Crimp Tool for 6-14 AWG Contacts | 2 | |
| M307 | Crimp Tool - PYLE NATIONAL | 2 | |
| M309 | Crimp Tool for Pin & Socket Contacts 8-18 AWG | 5 | |
| M310 | Crimp Tool for Pin & Socket Contacts 8-16 AWG | 5 | |
| M322 | Crimp Tool for Therm-X Terminal Assembly Pin & Socket Contacts | 2 | |
| M8ND | CRIMPING TOOL - HYLUGGER, FCI | 10 | |
| MH800 | Crimp Tool - ULTRA-PRECISION | 7 | |
| MH860 | CRIMP TOOL M22520/7- | 9 | |
| MH993 | Crimp Tool - Bias Crimp | 2 | |
| MHP-1 | PUMP - MANUAL, HAND FOR CRIMP TOOL. 10,000 PSI OUTPUT, AUTO SWITCHING FROM LOW TO HIGH OUTPUT. INCLUDES 6 FOOT HOSE AN (DANIELS MANUFACTURING CORPORATION) | 1 | |
| ML640050600 | CRIMP HEAD FOR THE AT-200 PNEUMATIC TOOL | 1 | |
| MR4C | CRIMP TOOL - BURNDY (#9-4 AWG Uninsulated Terminal and Splices) | 2 | |
| MS3191-1 | CRIMPINGTOOLAF8(M22520/1- | 6 | |
| MS3198-1 | CRIMPING TOOL - FRAME | 1 | |
| MY28 | CRIMP TOOL - BRUNDY | 6 | |
| MY28-6 | CRIMP TOOL BURNDY MY28-6 O0109 | 1 | |
| MY29-11 | CRIMP TOOL - BURNDY (Wire lug crimping tool) | 2 | |
| PMT232 | Pneumatic Crimp Tool for M81824/1-/3 Splices | 2 | |
| PMTB232 | TOOL - CRIMPING | 2 | |
| PPFC-1H | ASSEMBLY - HEAD/CYLINDER, CRIMPING TOOL. (DANIELS MANUFACTURING CORPORATION) | 4 | |
| PWA87552 | CRIMPER TOOL - FINISH | 3 | |
| PWA87553 | CRIMPER TOOL - PRE-BEND | 2 | |
| R282589107 | CRIMP TOOL LOCATOR/POSTNR M22520/1-01 RGOH | 1 | |
| RJ45 | CRIMPING TOOL KIT (CRIMPING RJ45 T-568B) | 2 | |
| RRT028932 | CRIMP TOOL - CRIMP NEW WASHERS ON FUEL SPRAY NOZZELS | 5 | |
| RTDCF-960 | CRIMP TOOL RUSSTECH RTDCF-960 O0106 | 1 | |
| SCA-M22520KIT | CRIMP TOOL M22520-1-01 AND -02 TURRET INSERTION TOOLS | 1 | |
| SCA-M22522KIT | CRIMP TOOL M22520-1-01 AND -02 TURRET INSERTION TOOLS | 1 | |
| SCT323 | TOOL - CRIMPING, SAFETY CABLE | 3 | |
| SERT22263 | CRIMPING TOOL - BLANK TOOL | 1 | |
| SERT22265 | CRIMPING TOOL - FINISHING TOOL | 1 | |
| SERT23530 | CRIMPING TOOL OF THE BUSHING - BLANK TOOL | 1 | |
| SERT23531 | CRIMPING TOOL OF THE BUSHING - FINISHING TOOL | 1 | |
| SERT23533 | CRIMPING TOOL OF THE BUSHING - FINISHING TOOL | 1 | |
| SERT23783 | CRIMPING TOOL - BLANK TOOL | 1 | |
| SERT23784 | CRIMPING TOOL - FINISHING TOOL | 1 | |
| SERT23786 | CRIMPING TOOL - BLANK TOOL | 1 | |
| SERT23787 | CRIMPING TOOL - FINISHING TOOL | 1 | |
| SL-53 | LOCATOR FOR P/N: M10S-1 CRIMPING TOOL | 1 | |
| SNPS4 | CRIMPING-TOOL | 1 | |
| ST956C | TOOL - CRIMPING | 1 | |
| ST956D | TOOL - CRIMPING | 1 | |
| T185 | CRIMP TOOL-AMP-SEATS | 5 | |
| TBM14M | CRIMP TOOL - POWER, PNEUMATIC | 3 | |
| TH1A | TOOL - CRIMPING (16 GAGE CONTACT) | 13 | |
| TH285 | CRIMPING TOOL - LOCATOR | 5 | |
| TH338 | LOCATOR - CRIMPING TOOL | 3 | |
| TP-974 | POSITIONER - FOR CRIMPING TOOL M310 | 2 | |
| TR-490 | TOOL ⬠CRIMPING (POST S.B. 767 106-25-05) | 9 | |
| U9230-T5 | TOOL - UNCRIMPING | 1 | |
| W-HT-1919 | GC Waldom Electronics W-HT-1919 Red Handle 24-14 AWG Econo Crimp Strips Cuts Hand Tool | 1 | |
| W-HTR-1719-C | TOOL HAND CRIMPER 18-24AWG SIDE | 3 | |
| WA22 | Pneumatic Crimp Tool - Equivalent to AFM8 | 2 | |
| WA22-CC | Pneumatic Crimp Tool with Cycle Counter - Equivalent to AFM8 | 2 | |
| WA22-LC-X1 | Hand-Held Pneumatic Indent Crimp Tool | 2 | |
| WA22AE | Pneumatic Indent Crimp Tool - MH992 Equivalent | 2 | |
| WA22BC | Pneumatic Crimp Tool - Bias Crimp | 2 | |
| WA22BESS | Pneumatic Crimp Tool - Equivalent to AFM-10 | 2 | |
| WA22BH | Pneumatic Crimp Tool - Equivalent to MH835 | 2 | |
| WA22H | Pneumatic Indent Crimp Tool - MH800 Equivalent | 2 | |
| WA22M | Pneumatic Crimp Tool - Equivalent to MH820 | 2 | |
| WA22P | Pneumatic Indent Crimp Tool - MH860 Equivalent | 2 | |
| WA22PSS | Pneumatic Crimp Tool - Equivalent to MH860 | 2 | |
| WA22SS | Pneumatic Crimp Tool with Side Selector - Equivalent to AFM8 | 2 | |
| WA22U | Pneumatic Indent Crimp Tool - 39-000 Equivalent | 2 | |
| WA23 | CRIMP TOOL - M22520/ | 11 | |
| WA27-300BT-EP | Pneumatic Indent Crimp Tool - Equivalent to M300-BT | 2 | |
| WA27-309 | Pneumatic Indent Crimp Tool - Equivalent to M309 Selector Settings 1-4 | 2 | |
| WA27-309-2C | Pneumatic Indent Crimp Tool - Equivalent to M309 | 2 | |
| WA27-309-EP | Pneumatic Indent Crimp Tool- Equivalent to M309 Selector Setting 5-8 | 2 | |
| WA27CG | Pneumatic Indent Crimp Tool - Equivalent to 1716P-1 | 2 | |
| WA27E | Pneumatic Indent Crimp Tool - Equivalent to FT-8 | 2 | |
| WA27F | CRIMP TOOL WA27F USE AF8 (M22520/1-01) | 3 | |
| WA27F-CC | Pneumatic Indent Crimp Tool - Equivalent to AF8 with Cycle Counter | 2 | |
| WA27FSS | Pneumatic Indent Crimp Tool - Equivalent to AF8 with Side Selector | 2 | |
| WA27FSS-CC | Pneumatic Indent Crimp Tool - Equivalent to AF8 with Side Selector and Cycle Counter | 2 | |
| WA27R | Pneumatic Indent Crimp Tool - Equivalent to GS200-1 | 2 | |
| WA27VM8 | Pneumatic Indent Crimp Tool - Equivalent to VM8 | 2 | |
| WA27XE-EP | Pneumatic Indent Crimp Tool - Equivalent to GS2XE | 2 | |
| WA2F-CC | Pneumatic Indent Crimp Tool - AF8 Equivalent - with Cycle Counter | 1 | |
| WC-JWPF | HAND CRIMPER TOOL RECTANGULAR CONTACTS, 22-26 AWG SIDE ENTRY, RATCHET | 1 | |
| WT-406 | CRIMP TOOL 010-0083-0000 HX3 | 1 | |
| WT110M | CRIMPING TOOL,M22520/24-01 | 1 | |
| WT401 | CRIMPING-TOOL | 1 | |
| Y16 | CRIMPING TOOL - DIE | 1 | |
| Y196 | CRIMPING TOOL - DIE | 5 | |
| Y205P | CRIMPING TOOL - LOCATOR | 3 | |
| YRS-980 | HAND CRIMPER TOOL RECTANGULAR CONTACTS, 22-26 AWG SIDE ENTRY | 3 | |
| Z0111435 | TOOL-CRIMPING | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
