| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| RST4241RFPIN | TOOL, PIN | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98F32104000000 | REMINST REM.-INST. TOOL, PINTLE PINS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104000001 | TOOL REM.-INST. TOOL, PINTLE PINS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) EMT320001 | REMOVAL TOOL, MLG PINTLE PIN (CALIBRATION) | 1 | |
| 0009-0148GSE2-1 | TOOL, RMV/INSTL, SEC-ONDARY PIN - HORIZON-TAL STABILIZER | 1 | |
| 10C1048G01 | TOOL, FAN SPINNER GUIDE (BOX 1) | 5 | |
| 10C1227 | TOOL, REMOVAL - FAN SPINNER | 1 | |
| 10C1227G02 | TOOL,REMOVAL-FAN SPINNER | 5 | |
| 114-1108TE | Tool, pin retainer gauge | 1 | |
| 114-245TE | Tool, adjuster pin installation | 1 | |
| 114-434TE | Tool, adjuster pin installation | 1 | |
| 114-452TE | Tool, adjuster pin installation | 1 | |
| 14-6850-4000 | Tool, Pintle Pin Extractor | 2 | |
| 1976593-4 | TOOL, INS, SHRT QUADRAX PIN | 1 | |
| 2063760-1 | Crimping tool, 24-22 AWG | 5 | |
| 2370122-001 | CAPTURE TOOL, METERING PIN | 1 | |
| 262724 | Lapping Tool, Hand Bushing | 1 | |
| 2C14252 | TOOL, LAPPING-HIGH PRESSURE TURB. ROTOR SHAFT | 1 | |
| 2C14252 REV B | TOOL, LAPPING-HIGH PRESSURE TURB. ROTOR SHAFT | 1 | |
| 2C18039 | TOOL,REMOVAL-FAN ROTOR SPINNER | 2 | |
| 2C18039G01 | TOOL,REMOVAL-FAN ROTOR SPINNER | 8 | |
| 2C18043 | TOOL,REMOVAL-SPINNER COVER, FAN ROTOR | 2 | |
| 2C18043P01 | REMOVAL TOOL, SPINNER COVER | 3 | |
| 2C6367 | TOOL, INSTALL REMOVE-PIN, T/R ACTUATOR ROD | 2 | |
| 2C6367 REV B | TOOL, INSTALL REMOVE-PIN, T/R ACTUATOR ROD | 1 | |
| 2C6367G01 | TOOL, INSTALL/REMOVE PIN - FAN REVERSER ACTUATOR ROD | 10 | |
| 2C6894 | TOOL, REMOVAL - FAN SPINNER | 2 | |
| 2C6894 REV G | TOOL, REMOVAL - FAN SPINNER | 1 | |
| 2C6894G01 | TOOL, REMOVAL - FAN SPINNER | 3 | |
| 2C6894G04 | TOOL, REMOVAL - FAN SPINNER | 10 | |
| 2C6967G06 | TOOL, INSTALL, S-2, HPC BLADE RETAINER LOCK PIN | 2 | |
| 2C6968G02 | TOOL, REMOVAL, S-2, HPC BLADE RETAINER LOCK PIN | 1 | |
| 2C81213G01 | TOOL, SHIPPING COVER CPRSR INLET | 1 | |
| 3170034-1 | REMOVAL TOOL, MAIN LANDING GEAR STRUT METERING PIN | 1 | |
| 3170034-6 | REMOVAL TOOL, MAIN LANDING GEAR STRUT METERING PIN | 1 | |
| 330A98-2045-01 | TOOL,INSERTING BEARING/SPINDLE | 1 | |
| 332A93-3119-00 | TOOL,SPINDLE HOLDING FIXTURE | 1 | |
| 332A93-3125-02 | TOOL,INSERTING SPINDLE BEARING | 1 | |
| 3404026-1 | SPINNER REMOVAL/INSTALLATION TOOL KIT, CONSISTING OF: SPINNER REMOVAL TOOL, AND FASTENER RELEASE TOOL. | 1 | |
| 350A93350500 | TOOL, GIMBAL JOINT PIN EXTRACTION | 1 | |
| 359-8102-010 | CRIMPING TOOL, TERMINAL, HAND | 1 | |
| 365A93-3381-00 | TOOL, REPLACEMENT CHECK PIN | 1 | |
| 3G1005G00732 | TOOL, T/R BLADES FLAPPING BLOCK (HD-03-00) | 1 | |
| 3G1005G01732 | TOOL, T/R BLADES FLAPPING BLOCK (HD-03-00) | 1 | |
| 416200GSE2-1001 | TOOL, RMV/INSTL, SEC-ONDARY PIN - HORIZON-TAL STABILIZER | 4 | |
| 45-2824-9 | TOOL, STRIPPING | 3 | |
| 45-403 | TOOL, STRIPPING - OUTER SHEATH | 5 | |
| 45098 R/B 91539-1 | CRIMPING TOOL, TERMINAL, HAND | 1 | |
| 5195 | TOOL, INSTALLATION PINS | 1 | |
| 5206 | TOOL, SLEEVES SHAPING | 1 | |
| 46673 | CRIMPING TOOL, HAND | 13 | |
| 48070 | TOOL, CRIMPING | 1 | |
| 48518 | CRIMPING TOOL, HAND | 1 | |
| 49900 | Crimping Tool,Terminal | 1 | |
| 524-12-480 | WIRE STRIPPING TOOL, 8 - 22 AWG | 1 | |
| 575198 | TOOL, CRIMPING | 1 | |
| 58006-00 | CRIMPING TOOL, HP 50 | 1 | |
| 59606AT1 | LAP TOOL, PIN | 1 | |
| 59974-1 | TOOL, CRIMPING | 13 | |
| 606PR066 | IC EXTRACTOR TOOL, 20-84 PINS NON-ESD PULL TOOL | 1 | |
| 6260A8000-01 | SHIM TOOL, DRAG BRACE APEX PIN | 1 | |
| 6260A9000-01 | REMOVAL TOOL, ANTI-ROTATION PIN | 3 | |
| 63756-1 | TOOL,PIN SET | 2 | |
| 63819-0000 | CRIMPING TOOL, MANUAL | 10 | |
| 68756-1 | TOOL, PIN SET | 1 | |
| 68756-3 | TOOL, PIN SET | 1 | |
| 69256 | CRIMPING TOOL, TERMINAL, HAND | 1 | |
| 638190000 | CRIMPING TOOL, MANUAL | 10 | |
| 69-256 | CRIMPING TOOL, TERMINAL, HAND | 1 | |
| 7006569-1 | DISPATCH TOOL, LOCK PIN, ACM | 1 | |
| 753898-1 | Crimping tool, DAHT 187 pos. lock MK-2 | 3 | |
| 822-3292GSE2 | TOOL, RMV/INSTL, SEC-ONDARY PIN - HORIZON-TAL STABILIZER | 1 | |
| 822-3292GSE2-1 | TOOL, REM/INSTL, SECONDARY PIN - HORIZONTAL STABILIZER | 1 | |
| 851-30486-507 | TOOL, PIN EXTRACTION | 2 | |
| 856A1130P08 | TOOL, SPINNER REMOVA | 9 | |
| 856A3322G03 | TOOL, CRIMPING - NO. 5 BRG. NUT | 8 | |
| 86-11S | CRIMPING TOOL, POSITIONER | 3 | |
| 86-1S | CRIMPING TOOL, POSITIONER | 5 | |
| 90902-1 | CRIMPING TOOL, USED WITH CONTACT | 1 | |
| 91066-3 | TOOL,PIN INSERTION | 10 | |
| 91067-1 | PIN INSERTION/EXTRACTION TOOL, 22-28 AWG (GREEN/WHITE) | 11 | |
| 91067-2 | PIN INSERTION/EXTRACTION TOOL, 20-24 AWG (RED/WHITE) | 10 | |
| 98D32104190-218 | TOOL, SHORT PIN | 1 | |
| 98D32104190002 | Tool, Removal/Installation Pintle Pins | 19 | |
| 98D57004009000 | TOOL, PINTLE BEARING | 20 | |
| 98F32104000000 | REM.-INST. TOOL, PINTLE PINS | 8 | |
| 98F32104000001 | REM.-INST. TOOL, PINTLE PINS | 14 | |
| 98F32104011000 | R-I TOOL, PIN S-MECH | 14 | |
| 98F32104017000 | REM.-INST. TOOL, ECCENTRIC PIN | 13 | |
| 98L32104000000 | PINTLE - ALIGNMENT TOOL, WLG | 1 | |
| 98L32104029000 | TOOL, ALIGNMENT - WLG PINTLE PI | 1 | |
| 98V32104016000 | RETAINING TOOL, MLG PINTLE BLOCK | 4 | |
| 9C3036G01 | TOOL, REMV/INST SPINNER | 2 | |
| A1M170GE1 | TOOL, EMB RVSM MAPPING | 3 | |
| A52032-17 | SET - LATCH PIN ADJUSTMENT TOOL, MAIN DECK CARGO DOOR (SET OF 12 PINS) | 2 | |
| ACS76046 | TOOL, PIN RIGGING TENSATOR SPRING | 4 | |
| AFM-8 | CRIMPING TOOL, TERMINAL HAND | 14 | |
| AGE-04265-403 | FLIGHT TOOL, RIGGING PINS | 10 | |
| AGINS0027 | PIN-TOOL,EXTRACTION | 1 | |
| AT-HU87127 | INGTALLATION/EXTRACTION TOOL, HINGE PIN 2 | 1 | |
| AT300 | TOOL, CRIMPING | 2 | |
| AT31792 | TOOL, METERING PIN | 2 | |
| AT31792-IAS | TOOL, METERING PIN | 1 | |
| AT55724 | PIN-INSERTION TOOL, METERING | 1 | |
| ATC 2035 | REMOVAL TOOL, 22 GA.,FOR PINS | 1 | |
| ATS-18E | Stride Tool Milbar 18E Multi-Purpose Crimping Tool, Terminal, Hand | 1 | |
| B32003-1 | TOOL,PIN PULLER | 12 | |
| B32018-1 | TOOL,ALIGNMENT PIN | 9 | |
| B52009-1 | MISCELLANEOUS TOOL, SAFETY PIN - POWER INSTALLATION, MAIN ENTRY DOORS | 19 | |
| BM323 | TOOL, CRIMPING SAFETY CABLE | 4 | |
| BM323 | TOOL, CRIMPING SAFETY CABLE | 4 | |
| C32033-1 | TOOL, Puller - NLG Trunnion Pin | 19 | |
| C32035-1 | TOOL, PIN INSERTION/REMOVAL | 15 | |
| CAT5824-5 | TOOL, TRAILING ARM HINGE PIN | 2 | |
| CP1-CED-330 | E-DRILL, UNIVERSAL HAND TOOL, WITH REPLACEABLE GROUND PIN AND 30 FT. INTEGRAL CORD. (TRI-WING) | 1 | |
| CP1-CEDKIT-320 | E-DRILL, UNIVERSAL HAND TOOL, WITH REPLACEABLE GROUND PIN AND 30 FT. INTEGRAL CORD. (TRI-WING) | 1 | |
| CS710-150 | TOOL, HINGE-PIN | 1 | |
| CST101 | WIRE STRIPPING TOOL, #26 - #22 AWG | 1 | |
| CST115 | WIRE STRIPPING TOOL, #20 - #10 AWG | 1 | |
| CUTA1560103B | PLGA1561010A PIN PLUGS( EXTRACTION TOOL,INSTALLATION TOOL | 2 | |
| DAPT65-0087-00 | TOOL, SPINNER REMOVA | 6 | |
| DCM1593-1 | TOOL,PINTLE PIN INSTL/RMVL-NLG | 1 | |
| DCM1593-1 | TOOL,PINTLE PIN INSTL/RMVL-NLG | 1 | |
| DHK160-PR | Removal Tool, Pin | 2 | |
| DMC1264 | KIT CRIMPING TOOL, 737 NG | 7 | |
| DMC1383 | CRIMPING TOOL,TERMINAL,HAND | 2 | |
| EMT320001 | REMOVAL TOOL, PINTLE PIN | 6 | |
| ERG4001 | ABB Sta-Kon ERG4001 Ergonomic Crimping Tool, Terminal, Hand | 1 | |
| ES345 | TOOL, SIMULATOR-WHEEL SPINUP (ANTISKID) TEST BOX | 5 | |
| EX-5 | EXTRACTION TOOL, 20-128 PINS NON-ESD PULL TOOL | 7 | |
| F46251 | TOOL, MLG CENTRE PIN EXTI | 2 | |
| F46252 | TOOL, MLG CENTRE PIN ADA | 2 | |
| G600-280002-23 | TOOL, FUEL DRAIN REMOVAL 4-PIN | 3 | |
| G700-521113-1 | SWAGING TOOL, HANDRAIL PIN | 2 | |
| GMT232 (11851) | Crimping tool, terminal, GMT232 | 1 | |
| GS100-1 | CRIMPING TOOL, TERMINAL, HAND | 5 | |
| GS13429-1 | INSERTING TOOL, ROLL PIN | 1 | |
| GS15730-1 | TOOL, CRIMPING | 1 | |
| GS200-1 | CRIMPING TOOL, TERMINAL, HAND | 5 | |
| GS21294-1 | TOOL, SPINNER REMOVAL | 12 | |
| GS21294-2 | TOOL, SPINNER REMOVAL | 4 | |
| GS23438-1 | TOOL, SPINNER REMOVAL | 13 | |
| HH-80C | CRIMPING TOOL,HYDRAULIC | 1 | |
| HU87128 | TOOL,EXTRACTOR-R/I N.3/4 HINGE PIN T/R | 10 | |
| LTCT3981 | CRIMPING TOOL,LOCKI | 1 | |
| LTCT6740 | REMOVAL TOOL,PIN | 1 | |
| M22520-7-02 | CRIMPING TOOL, POSITIONER | 1 | |
| M22520-7-09 | CRIMPING TOOL, POSITIONER | 1 | |
| M22520/1-01 | CRIMPING TOOL,TERMINAL,HAND | 26 | |
| M22520/2-01 | TOOL, CRIMPING | 18 | |
| M22520/24-01 | CRIMPING TOOL,M22520/24-01 | 1 | |
| M22520/31-01 | CRIMPING TOOL, TERMINAL, HAND | 2 | |
| M22520/4-01 | CRIMPING TOOL, TERMINAL, HAND | 2 | |
| M22520/5-01 | CRIMPING TOOL, TERMINAL, | 23 | |
| M22520/7-01 | CRIMPING TOOL,TERMI | 9 | |
| M303 | CRIMPING TOOL, 3.0 IN (7.6 CM) EXTENSION − SAFETY CABLE 0.032 IN (0.81 MM) DIA. | 1 | |
| M309 | CRIMPING TOOL, HAND | 5 | |
| M33520-1-01 | CRIMPING TOOL,TERMINAL,HAND | 1 | |
| M81969-1-02 | PIN INSERTION/EXTRACTION TOOL, 20-24 AWG (RED/WHITE) | 30 | |
| M81969-1-04 | PIN INSERTION/EXTRACTION TOOL, 22-28 AWG (GREEN/WHITE) | 18 | |
| M81969-14-03 | M81969/14-03 INSERTION & REMOVAL TOOL, PLASTIC TOOL (BLUE/WHITE). INSTALLS AND REMOVES SIZE 16 PIN/S | 34 | |
| M81969/1-01 | PIN INSERTION/EXTRACTION TOOL, 22-28 AWG (GREEN/WHITE) | 23 | |
| M81969/1-02 | PIN INSERTION/EXTRACTION TOOL, 20-24 AWG (RED/WHITE) | 30 | |
| M81969/16-01 | TOOL, PIN INSERT/EXTRACT RED/GREEN/WHITE | 13 | |
| MH992 | CRIMPING TOOL, TERMINAL, HAND | 2 | |
| MIT65B04430-1 | MISCELLANEOUS TOOL, SAFETY PIN - POWER INSTALLATION, MAIN ENTRY DOORS | 7 | |
| MS17986C616T00L | TOOL, GEAR PIN | 1 | |
| NAS1581A3T10 | TOOL, SHIPPING COVER CPRSR INLET | 1 | |
| OS23044 | Tool, Lapping | 2 | |
| OSD10E | TOOL, CRIMPING DEVICE | 1 | |
| PWA45551 | TOOL, MD-80, PIN ALIGNING | 1 | |
| PWA86334 | TOOL, PIN-ENGINE RIG HPC BELLCRANK | 2 | |
| R47164 | INSTALLATION TOOL, ADJUSTER PIN | 3 | |
| RB PWC30425 | Crimping Tool, Terminal | 1 | |
| RBT101741-101 | CENTERING TOOL, TAIL ROTOR FLAPPING AXIS | 3 | |
| RBW6705G00632-3G | Flapping Locking Tool, Tail Rotor | 2 | |
| RE268338124-1 | LAPPING TOOL, BUSHING | 1 | |
| RE268338124-3 | LAPPING TOOL, BUSHING | 1 | |
| RRT040663 | TOOL,HANDLING SPINNER | 3 | |
| RSE1092 | ALIGNMENT TOOL, FAN COWL SHEAR PINS | 1 | |
| RSE1092 REV NC | ALIGNMENT TOOL, FAN COWL SHEAR PINS | 1 | |
| RSEI092 | ALIGNMENT TOOL, FAN COWL SHEAR PINS | 1 | |
| RST2027RFPIN | TOOL, REPLACEMENT PIN | 1 | |
| S2521038600200 | TOOL, BALL PIN INSTALL | 6 | |
| SSP40246 | TOOL, PIN, GUIDE BRG ASSY | 1 | |
| ST2575C | STANDARD TOOL - FENWAL CONNECTORS, SLEEVE AND PIN PRESS TOOL, BAC5162-64 | 2 | |
| ST921MA-3-7-33-ALL-P | PIN: SHLDR,TOOL,REMOVAL,SLEEVE,TAPERED | 2 | |
| T-505718 | Tool,Contact(Pin Connector)Insertion | 1 | |
| T-505718PM | TOOL,CONTACT ( PIN CONNECTOR ) INSERTION | 1 | |
| T-505719 | Tool,Contact(Pin Connector)Extraction | 1 | |
| T-505719PM | TOOL,CONTACT ( PIN CONNECTOR ) EXTRACTION | 1 | |
| T101741-101 | CENTERING TOOL, TAIL ROTOR FLAPPING AXIS | 2 | |
| TL35491 | PIN CLEANING TOOL, BLEED-AIR LOOP CONN. | 3 | |
| TN326330 | PIN ALIGNMENT TOOL, HORIZONTAL STABILIZER FITTINGS | 1 | |
| TPFAA-B8-002 | 787 SLAT PINION GEAR PIN REM TOOL, | 3 | |
| TR-490 | WIRE SPLICE CRIMPING TOOL, FOR LIGHT HARNESS | 9 | |
| TZ-6368 | CERAMIC PIN REPLACEMENT TOOL,GSE 414 | 14 | |
| TZ6368 | TOOL, CERAMIC PIN(GSE414) (BOX 1) | 14 | |
| WT110M | CRIMPING TOOL,M22520/24-01 | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
