| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2TE65B07917 | Test Duct | 9 | |
| 2TE65B07917-1 | TEST DUCT | 1 | |
| 3505-77 | TEST DUCT | 1 | |
| SBE1670 | TEST DUCT | 1 | |
| SBE1671 | TEST DUCT | 1 | |
| SK15914 | TEST DUCT | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2-069 | COUNDUCTIVITY TEST EQUIPMENT (SIGMATEST) | 1 | |
| 2.069 | SIGMATEST 2.069 EDDY CUREENT CONDUCTIVITY | 1 | |
| 2.07 | CONDUCTIVITY TESTER | 3 | |
| 2.07 METER | CONDUCTIVITY TESTER | 1 | |
| 2007 | COUNDUCTIVITY TEST EQUIPMENT (SIGMATEST) | 1 | |
| 2025172-1 | DUCT TEST ADAPTER | 1 | |
| 2025173-1 | DUCT TEST ADAPTER | 1 | |
| 206880 | NDT SIGMATEST D ( CONDUCTIVITY METER ) | 1 | |
| 23007694 | BRACKET - VIBRATION MONITORING, REDUCTION GEAR MAINTENANCE TEST | 2 | |
| 23063518 | Fixture – Pull Test, Outer Bypass Duct Insert | 1 | |
| 28-0-0300H | TEST SET, BLEED AIR DUCTING | 2 | |
| 28-0-0500E | TEST SET ANTI ICING DUCT LEAKAGE | 2 | |
| 28-0-300H | TEST SET BLEED AIR DUCTING | 1 | |
| 2TE65B07917 | TEST DUCT - APU PNEUMATIC DUCT INSTALLATION STA. 1250, LBL 16, WL 115 | 9 | |
| 3300 | TRANSPONDER TEST SET (MICHEL AVIONICS PRODUCTS) | 9 | |
| 3505-76 | DUCT - TEST | 1 | |
| 3RDPARTY-RFTEST | 3RDPARTY-RFTEST;3rd Party Product for RF Test | 1 | |
| 4168 | POWER PRODUCTS BATTERY CHARGER AND CAPACITY TESTER | 8 | |
| 679636 | DUCT Â AIR INLET ENGINE TEST | 1 | |
| 6796365 | Duct – Air Inlet Engine Test | 2 | |
| 834526-1 | DUCT TEST ADAPTER (COOLING AIR INLET) | 1 | |
| 834527-1 | DUCT TEST ADAPTER (BLEED AIR INLET) | 1 | |
| 835320-1 | Duct Test Adapter (Bleed air side) | 1 | |
| 835323-1 | Duct Test Adapter (Cooling air side) | 1 | |
| 878B | METER - LCR (INDUCTANCE, CAPACITANCE, RESISTANCE; USE COM-20443 FOR OH BLEED LOOP TESTING) | 13 | |
| 880 | METER - LCR (INDUCTANCE, CAPACITANCE, RESISTANCE; USE COM-20443 FOR OH BLEED LOOP TESTING) | 2 | |
| 984701 | CONDUCTIVITY PROBE, NON-DESTRUCTIVE TESTING | 1 | |
| 9134700 | CONDUCTIVITY TESTER SIGMA TEST | 1 | |
| 98L28004061000 | NACA DUCT PRESSURE TEST | 2 | |
| 98S53305006-000 | ATR NON-CONDUCTIVE PROBE GUIDE ATR42-400/500 Part 6 53-31-21 Page 622 Figure 607. Material: Delrin. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53305006-001 | ATR NON-CONDUCTIVE PROBE GUIDE ATR42-400/500 Part 6 53-31-21 Page 622 Figure 607. Material: Delrin. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57204108000 | AIRBUS GUIDE BLOCK A318/A319/A320/A321 Part 4 57-20-10 Page 426 Figure 412. Material: Aluminum and Non Conductive Material. Includes Test Report and Certificate of Conformance. | 4 | |
| 99F53107330000 | Airbus A318/A319/A320/A321 Conductivity Standard Block Set SB A320 57-1190 Figure 3. Material: 2024-T3 and 2024-T0 Aluminum. .047", 063" and .080" thickness in each Aluminum Temper Painted with Primer. Includes Test Report and Certificate of Conformance. | 2 | |
| A-C143123-1/04 | TEST DUCT/SEAL CAP KIT | 1 | |
| A30002 | PLUG EQUIPMENT THERMAL ANTI ICING DUCT PRESSURE SWITCH TEST | 1 | |
| A30002-1 | PLUG EQUIPMENT - THERMAL ANTI-ICING DUCT, WING PRESSURE SWITCH TEST | 5 | |
| A30002-2 | THERMAL ANTI-ICING DUCT SWITCH TEST | 2 | |
| A30002QT | THERMAL ANTI-ICING DUCT SWITCH TEST | 1 | |
| A36003-173 | PLUG SET - PNEUMATIC DUCTS HYDROSTATIC PRESSURE TEST | 1 | |
| A36003-177 | PLUG SET - PNEUMATIC DUCTS HYDROSTATIC PRESSURE TEST | 1 | |
| A36003-178 | PLUG SET - PNEUMATIC DUCTS, HYDROSTATIC PRESSURE TEST | 1 | |
| A36003-179 | PLUG SET - PNEUMATIC DUCTS, HYDROSTATIC PRESSURE TEST | 1 | |
| A36008-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| A36009-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| A36010-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| A36011-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| A36012-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| A36013-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| A36014-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| A36015-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| A36016-1 | PRESSURE TEST PLUG - DUCT ASSEMBLY | 1 | |
| A36017-1 | PLUG - DUCT, PROOF PRESSURE TEST | 1 | |
| A36018-1 | PLUG EQUIPMENT - DUCT, PROOF PRESSURE TEST | 1 | |
| A36019-1 | PLUG EQUIPMENT - DUCT, PROOF PRESSURE TEST | 1 | |
| A36020-1 | PLUG EQUIPMENT - DUCTS, PROOF PRESSURE TEST | 1 | |
| A78019-27 | PUMP TEST C- DUCT T/ | 8 | |
| AC143620-1-2 | TEST DUCTS | 1 | |
| AF-4327 | CUSTOM ZETEC CONDUCTIVITY REFLECTION SPOT PROBE. 0.157 IN. (4MM) TIP. 3-100KHz WITH CENTER FREQUENCY 60KHZ. SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5154 | LOW FREQUENCY SURFACE PROBE. DIFFERENTIAL. .375 DROP. .312 TIP DIAMETER. 6.0" LONG. 1-20KHZ. TRIAX FISCHER CONNECTOR. Includes test report. ....CONDUCTIVITY REFLECTION PROBE. RIGHT ANGLE. 200HZ-100KHZ. CENTER FREQUENCY 60KHZ. TRIAX FISCHER CONNECTOR.... | 1 | |
| AF-5155 | LOW FREQUENCY SURFACE PROBE. REFLECTION. .500 DROP. .312 TIP DIAMETER. 6.0" LONG. 1-20KHZ. TRIAX FISCHER CONNECTOR. Includes test report. ....CONDUCTIVITY REFLECTION PROBE. RIGHT ANGLE. 200HZ-100KHZ. CENTER FREQUENCY 60KHZ. TRIAX FISCHER CONNECTOR. I... | 1 | |
| AF-5156 | RIGHT ANGLE CONDUCTIVITY PROBE. CENTER FREQUENCY 60 KHZ. 200HZ-100KHZ FREQUENCY. TRIAX FISCHER CONNECTOR. .420 DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5169/3KHZ | LOW FREQUENCY SURFACE PROBE. DIFFERENTIAL 45°, .500" DROP. .315" OD TIP. 5.0" LONG. 3-20KHZ. TRIAX FISCHER CONNECTOR. Includes test report. CONDUCTIVITY REFLECTION PROBE. RIGHT ANGLE. 200HZ-100KHZ. CENTER FREQUENCY 60KHZ. TRIAX FISCHER CONNECTOR. Includes | 1 | |
| AFNDT-2008/F | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PROCEEDURE 1, FIGURE 11, PAGE 15 ALUMINUM 2014-T6 CONDUCTIVITY RANGE 35-40 IACS.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2120 | CUSTOM EDDY CURRENT BLOCK, 4340, 4X1X.250, EDM .2MM, .5MM, 1.0MM X .005±.002. ADD.003 NON-CONDUCTIVE SHIMS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-7003TI | 12 HOLE REFERENCE STANDARD. MATERIAL: 6AL-4V Titanium.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .020" X .005" WIDE +/-.001" THROUGH EDM NOTCH IN EACH HOLE. Includes Test Report, Conductivity and Certi... | 1 | |
| APB-NDT007 | BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 7-8 Figure 2. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | 1 | |
| APB-NDT008 | BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 1-2 Figure 4. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | 1 | |
| APB-NDT009 | BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 5-6 Figure 6.Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certif | 1 | |
| APB-NDT010 | BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 8-9 Figure 8. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | 1 | |
| APB-NDT011A | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 8-9 Figure 3. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT011B | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 11-12 Figure 5. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT011C | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 14-15 Figure 7. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT011D | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 17-18 Figure 9. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT015 | BOEING AVIATION PARTNERS REFERENCE STANDARD 767 Part 6 57-20-09 Page 21-22 Figure 10. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Ce | 1 | |
| APB-NDT016 | BOEING AVIATION PARTNERS REFERENCE STANDARD 767 Part 6 57-50-09 Page 24-25. Figure 12 Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Ce | 1 | |
| APB-NDT3301 | AVIATION PARTNERS BOEING REFERENCE STANDARD 737 Part 6 57-20-34 Page 7-8 Figure 2. Material: 2024-T3 (28.5-32% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5201 | AVIATION PARTNERS BOEING 757 Part 6 57-20-01 Page 23-24 Figure 10. Material: 7075-T7 and 2324 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 2 | |
| APB-NDT5202 | AVIATION PARTNERS BOEING 757 Part 6 57-20-01 Page 19-20 Figure 8. Material: 7050-T7 and 2324 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 2 | |
| APB-NDT5203 | AVIATION PARTNERS REFERENCE STANDARD 737 Part 6 57-20-02 Page 7-8 Figure 2. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate | 2 | |
| APB-NDT5204 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-02 Page 11-12 Figure 4. Material: 2224-T3 and 2324-T3 or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 2 | |
| APB-NDT5205 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-02 Page 15-16 Figure 6. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Cer | 2 | |
| APB-NDT5206 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 8-9 Figure 2. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | 2 | |
| APB-NDT5207 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 12-13 Figure 4. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Cer | 2 | |
| APB-NDT5208 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 16-17 Figure 6. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Cer | 2 | |
| APB-NDT5301 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 15-16 Figure 6. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5302 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 11-12 Figure 4. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5303 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 7-8 Figure 2. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBC-ALU6082 | ACCESSORY, TEST BLOCK, CONDUCTIVITY, ALUMINIUM ALLOY, 6082-T6 (45.1-49.0 %IACS) | 1 | |
| ATBC-ALU7075 | TEST BLOCK, CONDUCTIVITY, ALUMINIUM ALLOY, 7075-T6 (30.0-34.1 IACS) | 1 | |
| ATBC-BRASS | TEST BLOCK, CONDUCTIVITY, BRASS, CZ 121 (23.3-26.6 IACS) | 1 | |
| ATBCALU7075 | TEST BLOCK, CONDUCTIVITY, ALUMINIUM ALLOY, 7075-T6 (30.0-34.1 %IACS) | 1 | |
| ATBCBRASS | TEST BLOCK, CONDUCTIVITY, BRASS, CZ 121 (23.3-26.6 %IACS) | 1 | |
| B36004 | PLUG EQPT -0 PRESSURE TEST, L.P. DUCTS | 1 | |
| B36004-1 | PLUG EQUIPMENT - PRESSURE TEST, LOW PRESSURE DUCTS | 2 | |
| B36005-2 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| B36005-3 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| B36005-4 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| B78012-1 | TEST EQUIPMENT - FAN DUCT REVERSER, MANUAL DRIVE ASSEMBLY | 5 | |
| BC-8000 | Power Products Battery Charger and Capacity Tester | 4 | |
| BH27956 | TESTER - THERMO SWITCH, K-TYPE THERMOCOUPLE SWITCHES TESTER - THERMO SWITCH, THERMOCOUPLE AND THERMAL SWITCHES (NOT "CE" CERTIFIED) TEMPCAL ADAPTER PROBE - PACK/ZONE DUCT OVERHEAT SWITCH | 1 | |
| C-DUCT-T-S-CF6 | C DUCT TEST SET TOOL | 1 | |
| C57003-3 | PRESSURE TEST DOOR ASSEMBLY - AIRPLANES WITH PRODUCTION WINGLETS, | 1 | |
| C57003-51 | PRESSURE TEST DOOR ASSEMBLY - AIRPLANES WITH PRODUCTION WINGLETS, | 1 | |
| CH1543-0042 | PRESSURE BLANKING PLUG FOR CONDUCTING TEST ON GUIDE TUBE ASSY (P/N CH1543A0011) | 1 | |
| D2-069 | COUNDUCTIVITY TEST EQUIPMENT (SIGMATEST) | 1 | |
| ELITEPCTS | PH, CONDUCTIVITY, TDS, SALINITY POCKET TESTER | 1 | |
| F5294 | PRODUCTION TEST FIXTURE | 1 | |
| F72878 | FLANGE -0 PRESSURE TEST L.P. DUCTS USED DURING | 1 | |
| F72878-1 | FLANGE DUCT TEST PRE | 1 | |
| F72878-2 | FLANGE DUCT TEST PRE | 1 | |
| F72878-3 | FLANGE DUCT TEST PRE | 1 | |
| F72878-4 | FLANGE DUCT TEST PRE | 1 | |
| F72878-5 | FLANGE DUCT TEST PRE | 1 | |
| F72878-6 | FLANGE DUCT TEST PRE | 1 | |
| F73013 | TEST SET -0 REDUCTION GEARBOX USED TO SUPPORT | 1 | |
| F7XC203059100 | TEST KIT FOR TELESCOPIC DUCTS | 1 | |
| F80233-1 | Test Equipment Plug -Ram Air Duct Installation | 2 | |
| G36001 | PLUG -0 DUCT PRESSURE TEST | 1 | |
| G36001-1 | PLUG - DUCT PRESSURE TEST | 1 | |
| G36002 | PLUG -0 DUCT PRESSURE TEST | 1 | |
| G36002-1 | PLUG - DUCT PRESSURE TEST | 1 | |
| G36003 | PLUG -0 DUCT PRESSURE TEST | 1 | |
| G36003-1 | PLUG - DUCT PRESSURE TEST | 1 | |
| G36004 | PLUG -0 DUCT PRESSURE TEST | 1 | |
| G36004-1 | PLUG - DUCT PRESSURE TEST | 1 | |
| G36005 | PLUG -0 DUCT PRESSURE TEST | 1 | |
| G36005-1 | PLUG - DUCT PRESSURE TEST | 1 | |
| G36006 | PLUG EQUIPMENT -0 DUCT TEST | 1 | |
| G36006-1 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36006-10 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36006-11 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36006-12 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36006-13 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36006-14 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36006-15 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36006-16 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36006-2 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36006-3 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36006-4 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36006-5 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36006-6 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36006-7 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36006-8 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36006-9 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36007 | PLUG EQUIPMENT -0 DUCT TEST PUROFLEX FLANGES | 1 | |
| G36007-2 | PLUG EQUIPMENT - DUCT TEST, PUROFLEX FLANGES | 1 | |
| G36008 | PLUG EQUIPMENT -0 DUCT TEST, PUROFLEX FLANGES | 1 | |
| G36008-2 | PLUG EQUIPMENT - DUCT TEST, PUROFLEX FLANGES | 1 | |
| G36008-4 | PLUG EQUIPMENT - DUCT TEST, PUROFLEX FLANGES | 1 | |
| G36008-5 | PLUG EQUIPMENT - DUCT TEST, PUROFLEX FLANGES | 1 | |
| G36008-6 | PLUG EQUIPMENT - DUCT TEST, PUROFLEX FLANGES | 1 | |
| G36009 | PLUG EQUIPMENT -0 DUCT/TUBE PRESSURE TEST | 1 | |
| G36009-1 | PLUG EQUIPMENT - DUCT/TUBE PRESSURE TEST | 1 | |
| G36009-2 | PLUG EQUIPMENT - DUCT/TUBE PRESSURE TEST | 1 | |
| G36009-3 | PLUG EQUIPMENT - DUCT/TUBE PRESSURE TEST | 1 | |
| G36010 | PLUG EQUIPMENT -0 DUCT PRESSURE TEST (65B90147 | 1 | |
| G36010-1 | PLUG EQUIPMENT - DUCT PRESSURE TEST (65B90147 DUCT) | 1 | |
| G36011-1 | PLUG EQUIPMENT - PRESSURE TEST, 69B89711 FLANGED DUCTS | 1 | |
| G36012 | PLUG EQUIPMENT -0 DUCT TEST, 14A466 & 14A469 | 1 | |
| G36012-1 | PLUG EQUIPMENT - DUCT TEST, 14A466 AND 14A469 FLANGED DUCTS | 1 | |
| G36012-2 | PLUG EQUIPMENT - DUCT TEST, 14A466 AND 14A469 FLANGED DUCTS | 1 | |
| G36012-3 | PLUG EQUIPMENT - DUCT TEST, 14A466 AND 14A469 FLANGED DUCTS | 1 | |
| G36013 | PLUG EQUIPMENT -0 DUCT TEST, JANITROL 12JOB | 1 | |
| G36013-1 | PLUG EQUIPMENT - DUCT TEST, JANITROL 12J08 FLANGED DUCTS | 1 | |
| G36013-3 | PLUG EQUIPMENT - DUCT TEST, JANITROL 12J08 FLANGED DUCTS | 1 | |
| G36013-5 | PLUG EQUIPMENT - DUCT TEST, JANITROL 12J08 FLANGED DUCTS | 1 | |
| G36013-6 | PLUG EQUIPMENT - DUCT TEST, JANITROL 12J08 FLANGED DUCTS | 1 | |
| G36014 | PLUG EQUIPMENT -0 DUCT TEST | 1 | |
| G36014-1 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36014-8 | PLUG EQUIPMENT - DUCT TEST | 1 | |
| G36015 | PLUG EQUIPMENT -0 DUCT TEST (MS33660, TYPE A | 1 | |
| G36015-1 | PLUG EQUIPMENT - DUCT TEST (MS33660, TYPE A BEAD) | 1 | |
| G36015-2 | PLUG EQUIPMENT - DUCT TEST (MS33660, TYPE A BEAD) | 1 | |
| G36015-4 | PLUG EQUIPMENT - DUCT TEST (MS33660, TYPE A BEAD) | 1 | |
| G36015-5 | PLUG EQUIPMENT - DUCT TEST (MS33660, TYPE A BEAD) | 1 | |
| G36015-6 | PLUG EQUIPMENT - DUCT TEST (MS33660, TYPE A BEAD) | 1 | |
| G36015-8 | PLUG EQUIPMENT - DUCT TEST (MS33660, TYPE A BEAD) | 1 | |
| G36016 | PLUG EQUIPMENT -0 DUCT TEST, 14A312 FLANGED DUCT | 1 | |
| G36016-1 | PLUG EQUIPMENT - DUCT TEST, 14A312 FLANGED DUCTS | 1 | |
| G36019 | PLUG -0 DUCT PRESSURE TEST (DUCTS WITH 65B94822 | 1 | |
| G36019-1 | PLUG - DUCT PRESSURE TEST (DUCTS WITH 65B94822 FITTINGS) | 1 | |
| G36020 | PLUG EQUIPMENT -0 DUCT TEST (20 MACHINED | 1 | |
| G36020-18 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-19 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-20 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-21 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-22 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-23 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-24 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-25 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-26 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-27 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-28 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-29 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-30 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-31 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-32 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-33 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-34 | PLUG EQUIPMENT - DUCT TEST (208 MACHINED FLANGES) | 1 | |
| G36021 | PLUG EQUIPMENT -0 DUCT TEST (65B90154 FLANGE) | 1 | |
| G36021-1 | PLUG EQUIPMENT - DUCT TEST (65B90154 FLANGE) | 1 | |
| G36022 | PLUG EQUIPMENT -0 DUCT PRESSURE TEST (65B94541 | 1 | |
| G36022-1 | PLUG EQUIPMENT - DUCT PRESSURE TEST (65B94541 DUCT) | 1 | |
| G36023 | PLUG -0 PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36023-1 | PLUG - PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36024 | PLUG EQPT -0 PNEUMATIC DUCT TEST | 1 | |
| G36024-1 | PLUG EQUIPMENT - PNEUMATIC DUCT TEST | 1 | |
| G36025 | PLUG EQPT -0 PNEUMATIC DUCT TEST | 1 | |
| G36025-1 | PLUG EQUIPMENT - PNEUMATIC DUCT TEST | 1 | |
| G36026 | PLUG EQPT -0 PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36026-1 | PLUG EQUIPMENT - PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36028 | PLUG -0 PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36028-1 | PLUG - PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36029 | PLUG -0 PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36029-1 | PLUG - PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36030 | PLUG -0 PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36030-1 | PLUG - PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36031 | PRESSURE TEST EQPT -0 DUCT ASSY | 1 | |
| G36031-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| G36032 | PRESSURE TEST EQPT -0 DUCT ASSY | 1 | |
| G36032-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| G36033-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| G36034 | PRESSURE TEST EQPT -0 DUCT ASSY | 1 | |
| G36034-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| G36037 | PLUG EQPT -0 DUCT, PROOF PRESSURE TEST | 1 | |
| G36037-1 | PLUG EQUIPMENT - DUCT, PROOF PRESSURE TEST | 1 | |
| G36038 | PLUG EQPT -0 DUCT, PROOF PRESSURE TEST | 1 | |
| G36038-1 | PLUG EQUIPMENT - DUCT, PROOF PRESSURE TEST | 1 | |
| G36040 | PLUG EQPT -0 DUCT, PROOF PRESSURE TEST | 1 | |
| G36040-1 | PLUG EQUIPMENT - DUCT, PROOF PRESSURE TEST | 1 | |
| G36041 | PLUG -0 DUCT, PROOF PRESSURE TEST | 1 | |
| G36041-1 | PLUG - DUCT, PROOF PRESSURE TEST | 1 | |
| G36042 | PLUG EQPT -0 DUCT, PROOF PRESSURE TEST | 1 | |
| G36042-1 | PLUG EQUIPMENT - DUCT, PROOF PRESSURE TEST | 1 | |
| G36047-1 | BLANKING PLATE - LEAK TEST, PRESSURE COMPENSATOR DUCT | 2 | |
| G5-5M0-320-0300 | Avionics Products Testers | 3 | |
| G5-5M0-321-0000 | Avionics Products testers | 3 | |
| G601R282001-1 | FUEL/VENT DUCT GUARD LEAK TEST KIT | 4 | |
| G670301106-1 | LEAK TEST PIPE - COWL ANTI-ICE DOUBLE WALL DUCT | 4 | |
| G670301106−1 | Leak Test Pipe − Cowl Anti−Ice Double Wall Duct | 4 | |
| GS19548-1 | TEST DUCT SEAL CAP | 1 | |
| GS21268-1 | COMPRESSOR OUT-TURBINE IN TESTING DUCT | 1 | |
| GS22233-1 | TEST DUCT SEAL CAP | 1 | |
| H294 | TESTER - THERMO SWITCH, K-TYPE THERMOCOUPLE SWITCHES TESTER - THERMO SWITCH, THERMOCOUPLE AND THERMAL SWITCHES (NOT "CE" CERTIFIED) TEMPCAL ADAPTER PROBE - PACK/ZONE DUCT OVERHEAT SWITCH | 3 | |
| H394-115 | TESTER - THERMO SWITCH, K-TYPE THERMOCOUPLE SWITCHES TESTER - THERMO SWITCH, THERMOCOUPLE AND THERMAL SWITCHES (NOT "CE" CERTIFIED) TEMPCAL ADAPTER PROBE - PACK/ZONE DUCT OVERHEAT SWITCH | 2 | |
| H394R | TESTER - THERMO SWITCH, K-TYPE THERMOCOUPLE SWITCHES TESTER - THERMO SWITCH, THERMOCOUPLE AND THERMAL SWITCHES (NOT "CE" CERTIFIED) TEMPCAL ADAPTER PROBE - PACK/ZONE DUCT OVERHEAT SWITCH | 8 | |
| HAL104 | HAL104 ADV MULTIFUNCTION PRODUCTION LINE SAFETY TESTER | 1 | |
| HEC-101 | EDDY CURRENT ELECTRICAL CONDUCTIVITY TESTER | 1 | |
| HTE29671 | PRESSURE TEST FIXTURE FOR CONDUCTING TEST ON GUIDE TUBE ASSY (P/N CH1543A0011) | 1 | |
| J36007-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 2 | |
| J36007-2 | PRESSURE TEST EQUIPMENT - DUCT | 1 | |
| J36008-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36009-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 2 | |
| J36010-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 2 | |
| J36011-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36012-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36013-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36014-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36015-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 2 | |
| J36016-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36018-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36019-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| NDT3202-A | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3202-B | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3202-C | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3202-D | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3202-E | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3202-F | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3202-G | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4243 | BOEING REFERENCE STANDARD 747 Part 6 57-10-31 Page 4 Figure 1. Material: 2024-T3 or An Airplane Quality with an Electrical Conductivity of 28-43% IACS. Fasteners: Non-Magetic Fastener. Includes Test Report and Certificate of Conformance. | 1 | |
| PCE-COM 20 | CONDUCTIVITY TESTER | 1 | |
| PWA29859 | AIRFLOW TEST FIXTURE - DUCT,TURB C/AIR_762X762X229MM/104.4KG_[PWA29859] | 1 | |
| PWC61759 | SLAVE EEC PRODUCTION ENG. TEST | 1 | |
| SIGMA TEST 2.070 | CONDUCTIVITY TESTER SIGMA TEST | 1 | |
| SIGMATEST D2-069 | CONDUCTIVITY TEST EQUIPMENT - MAGNETISECHE PRUEFANLAGEN GMBH | 1 | |
| SIGMATEST2.069 | CONDUCTIVITY TESTER | 1 | |
| ST863-PB | PLUG -0 MS33660 BEAD PRESSURE TEST DUCT ASSY | 1 | |
| TE65-51575-1 | TEST EQUIPMENT -0 PLUG-RAM AIR DUCT INSTL STA | 1 | |
| TE65B40403 | TEST EQUIPMENT - ELECTRICAL/ELECTRONIC EQUIPMENT COOLING SYSTEM EXHAUST DUCT SEAL PLUG | 1 | |
| TE65B40961 | TEST EQUIPMENT - DUCT INSTALLATION, LAVATORY-GALLEY VENTILATION SYSTEM DUCT INSTALLATION | 1 | |
| TRIN-FOFT | TRIN-FOFT;Service Credit for Trade-In FO Field Test Product | 1 | |
| TRIN-RFTEST | TRIN-RFTEST;Service Credit Trade-In RF Test Product | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
