| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 640-050-002 | TEST BLOCK 7075-T6 | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2213E | TEST BLOCK, 5-STEP - 7075-T6 ALUMINIUM (0.100 IN, 0.200 IN, 0.300 IN, 0.400 IN, 0.500 IN ) | 1 | |
| 29A029 | BLOCK, TEST, 3 NOTCH, 7075-T6 ALUMI | 5 | |
| 3NOTCHEC.IA | BLOCK, TEST, 3 NOTCH, 7075-T6 ALUMI | 1 | |
| 640-050-002 | BLOCK, TEST, 3 NOTCH, 7075-T6 ALUMI | 2 | |
| 99A53307267000 7075T6 | AIRBUS A300-600 CALIBRATION BLOCK PART 4 53-30-52 PAGE 413 FIGURE 407. Material Aluminum 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1076AL | ULTRASONIC STEP BLOCK .020", .050", .075", .100", .125" 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2009AL | 5 STEP WEDGE, 16mm, 17mm, 18mm, 19mm, 20mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2032/Al | 5 STEP REFERENCE BLOCK ..STEP SIZES 1.0" X 1.0" 7075-T6 ALUMINUM. (400",.450",.500",.550",.600"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2037/7075T6 | 10 STEP WEDGE SUPPLIED WITH HOLDING BLOCK. STEP SIZES: .040", .080", .120", .160", .200", .240", .280", .320", .360", .400" +/-.001". Material: 7075-T6 ALUMINUM. PAD SIZE: .75" x .75". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2058/7075T6 | 6 STEP CALIBRATION BLOCK, CUSTOM, .030", .040", 0.60" , 0.80", .100", .150", 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2075/AL-1 | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2081 | CUSTOM BOLT HOLE BLOCK, 7075-T6, 1/4" THICK, 3 SURFACE NOTCHES .008 / .020 / .040 DEEP, .020 THRU NOTCH FOR EACH HOLE, HOLE Ø 15/32, 1/2 , 9/16 , 5/8, 11/16, 3/4, 1/8, 7/16, 13/32, 3/8, 11/32, 5/16, 9/32, 1/4, 7/32, 3/16, 5/32, 7/8. Includes Test Report a | 1 | |
| AFNDT-2085/7075-T6 | 6 STEP CALIBRATION BLOCK,STEP SIZES 1.0" X1.0"(500",.600",.700",.800",.900" and 1.0") +/- .001" 7075-T6 ALUMINUM . Includes certification Report Traceable to NIST, Meets tolerance for ASTM E797... Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/7075-T6 | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2090AL | 5 STEP WEDGE, 11mm, 12mm, 13mm, 14mm, 15mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2103AL | METRIC 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm. PAD SIZE: 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2118 | CUSTOM 6 STEP BLOCK, 0.5mm, 1mm,2mm, 3mm, 4mm, 5mm +/- .05mm . Pad Size: .750" x .750" Material- 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2119AL | 5 STEP WEDGE, 11mm, 12mm, 13mm, 14mm, 15mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2157AL | 10 STEP REFERENCE BLOCK .025", .030", .040", .050", .063", .071", .080", .090", .100", .120" +/-.001" 7075-T6 ALUMINUM .75" x .75" STEP PAD. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3010/7075-T6 | METRIC 10 STEP CALIBRATION BLOCK, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm ± .05mm. Pad Size: 20mm X 20mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3045-2024T3 | 10 STEP REFERENCE BLOCK .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3045-7075T6 | 10 STEP REFERENCE BLOCK .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3142AL | CUSTOM 4 STEP REFERENCE BLOCK. MATERIAL: 7075-T6. STEP SIZE .0100",.400",.700", 1.00" +/-.001. PAD SIZE: 1"X4". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3192AL | 10 STEP REFERENCE BLOCK .020", .040", .060", .080", .100", .120", .140", .160", .180", .200" +/-.001" 7075-T6 ALUMINUM .75" x .75" STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3201A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 11.3mm(.445")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3202A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 14.3mm(.563")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3203A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.1mm(.594")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3204A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.9mm(.626")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3205A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.0mm(.630")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3206A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.3mm(.642")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3207A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.7mm(.657")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3208A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 17.5mm(.689")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3209A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 19.3mm(.760")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3244AL | 8 STEP WEDGE, 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3246AL | 8 STEP WEDGE, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3248AL | Custom Metric 6 Step Block. Step Thicknesses of 0.4mm, 0.7mm, 1.0mm, 1.3mm, 1.6mm, 2.0mm. (Tolerance: +/- 0.05mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3252AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3253AL | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Confo | 1 | |
| AFNDT-3254AL | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameters = 2 Holes 22.23mm(.875")Ø, and 25.4mm(1.0")Ø. EDM Flaws:.030" x .030" x .005" +/- .001" Corner EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Con | 1 | |
| AFNDT-3305AL | Custom 2 Hole Standard. Material: 7075-T6 Aluminum, Block Size: ..250" x 2.0" x 4.0" . HOLE SIZES:.098" and .188" Diameter with Type A% EDM Notch: .035" x .035" x .004" W ±.001". Includes Test Report and Certificate of Conformance Traceable to NIST. | 1 | |
| AFNDT-3334AL-1 | 6 STEP CALIBRATION BLOCK, STEP SIZES .040", .063", .100", .150", .200", .300" in 7075-T6 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3337AL | 5 STEP WEDGE .020", .030", .040", .050", .060". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3341AL | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = .75" x .75". Supplied with Delrin(Acetal) Holding Block. Includes Test Repo | 1 | |
| AFNDT-3343/7075T6 | 6 STEP WEDGE .010", .030", .050", .070", .090", .125" +/-.001", 7075-T6 ALUMINUM 0.75" x 0.75" STEP PAD. SUPPLIED WITH HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3348/7075T6 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 7075-T6 Aluminum (Surface Anodized for Corrosion Protection). Includes Test Report and Certificate of Conforma | 1 | |
| AFNDT-3350AL | 5 STEP WEDGE .020", .030", .040", .080", .090". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3351AL-1 | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 Aluminum. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3385/7075T6 | 12 STEP WEDGE, STEP THICKNESS: .024", .040", .060", .080", .100", .150", .200", .300", .400", .500" .650", .800" +/-.001" 7075-T6 ALUMINUM SUPPLIED WITH A DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3398AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .020", .030", .040", .050", .060", .070", .080", .090", .100" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3401AL | 7 STEP WEDGE. STEP SIZES: .040", .050", .060", .070", .080", .090", .100" +/- .001". PAD SIZE: 1.0"x 1.0", MATERIAL: 7075-T6 ALUMINUM SUPPLIED WITH ACETAL(DELRIN) HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3404AL | 5 STEP WEDGE .030", .050", .070", .090", .110". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3406AL-1 | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035" .040". MATERIAL: 7075-T6 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3409AL | 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/7075T6 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/7075T6 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3437AL | CUSTOM 4 STEP METRIC CALIBRATION BLOCK. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: 5mm, 10mm,15mm and 20mm. PAD SIZE: 20mm x 20mm, Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3446 | SURFACE STANDARD MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. EDM SLOT (0.5mm(.020") DEEP) x (0.13mm(.05") WIDE) +/-.03mm. BLOCK SIZE 3.50" X 1.0" X .50 Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3449/7075AL | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3462AL | 10 STEP REFERENCE BLOCK, Step Pad Thicknesses: .010", .020", .040", .060", .080", .100", .150", .200", .250", .300", +/-.001" . Material: Anodized 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Ce... | 1 | |
| AFNDT-3482AL | 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: .098", .197", .295", .394", .492" ± .001". PAD SIZE: 1.0" x 1.0". Supplied with Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3482AL-1 | 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: .020", .039", .059", .079", .098" ± .001". PAD SIZE: 1.0" x 1.0". Supplied with Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3483AL | BOEING 2 STEP CALIBRATION BLOCK, PT 4 51-00-00 PAGE 6 FIGURE 2, MATERIAL: 7075-T6 Aluminum. Step Size: 0.150" and 0.300" ±.0.002. PAD SIZE: 1.0" X 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3488/AL | 5 STEP WEDGE .032", .064", .128", .256", .500". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3491AL | METRIC 6 STEP WEDGE. STEP SIZE: 0.6mm, 1mm, 3mm, 7mm, 13mm, 20mm +/- .03mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3521AL | 5 STEP METRIC WEDGE , 2mm, 4mm, 6mm, 8mm, 10mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square Supplied with Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3523AL | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 7075-T6 Aluminum. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3542AL | METRIC 5 STEP WEDGE 0.6mm(.024"),5.44mm( .214"),10.26mm( .404"),15.09mm( .594"), 20mm(.787"). TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certif... | 1 | |
| AFNDT-3548/7075 | 5 STEP WEDGE, 1mm, 3mm, 5mm, 7mm, 10mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square supplied with Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3558/7075T6 | 10 STEP WEDGE SUPPLIED WITH DELRIN HOLDING BLOCK. STEP SIZES: .020", .040", .60", .80", .100", .120", .140", .160", .180", .200" +/-.001". Material: 7075-T6 ALUMINUM. PAD SIZE: .75" x .75". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-IIW-01AL | ALUM. IIW TYPE 1 TEST BLOCK.. Aluminum Ultrasonic IIW Type 1 Test Block 7075-T6 Aluminum. 1 "x 4"x 12". Contains 2" diameter hole and 4" radius. Also, 1/8" x 1" radius alternate reflector and 1/16" deep on echo side. Meets ASTM-E-164, MIL-STD-2154 a... | 1 | |
| AFNDT-PR-T-2521/22 | CUSTOM EDDY CURRENT SURFACE CALIBRATION BLOCK. PER CUSTOMER SUPPLIED DRAWING. MATERIAL: 7075-T6 Aluminum. EDM Notch size 1mm (.040') , .76mm(.030"), .2mm(.008") deep x .1mm(.004") wide +/- .002". Includes Test Report and Certificate of Conformance. | 1 | |
| AL7075-016-063 | CUSTOM 4 STEP REFERENCE BLOCK. MATERIAL: 7075-T6. STEP SIZE 0.016", 0.032", 0.056", 0.063" +/-.002". PAD SIZE: .787" x .787". Includes Test Report and Certificate of Conformance. | 1 | |
| AL7075-024-125 | CUSTOM 4 STEP REFERENCE BLOCK. MATERIAL: 7075-T6. STEP SIZE 0.024", 0.071", 0.112", 0.125" +/-.002". PAD SIZE: .787" x .787". Includes Test Report and Certificate of Conformance. | 1 | |
| ATBC-ALU7075 | TEST BLOCK, CONDUCTIVITY, ALUMINIUM ALLOY, 7075-T6 (30.0-34.1 IACS) | 1 | |
| ATBCALU7075 | TEST BLOCK, CONDUCTIVITY, ALUMINIUM ALLOY, 7075-T6 (30.0-34.1 %IACS) | 1 | |
| NRK-3AL | CUSTOM NAVY BLOCK 7075-T6 ALUMINUM. CONTAINS 20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Confromance. | 2 | |
| STANDARD-C | MIL-STD-2154A, STANDARD ULTRASONIC TEST BLOCK FOR AGNLE BEAM EXAMINATION, 7075-t6 | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
