| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10ME65B00116 | TE FLAP | 3 | |
| 10ME65B00116-1 | TE FLAP | 1 | |
| 11ME65B00116 | TE FLAP | 5 | |
| 14ME65B00116 | TE FLAP | 1 | |
| 15ME65B00116 | TE FLAP | 2 | |
| 16ME65B00116 | TE FLAP | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 95-92118-0001 | TEST BOX, FLAP CONTROL (CALIBRATION) | 1 | |
| (CALIB) 98A27508027000 | TEMPLATE TEMPLATE-OUTBOARD FLAP,TRACKS 3 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508030000 | TEMPLATE TEMPLATE-INBOARD FLAP,TRACK 2 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508688000 | TEMPLATS TEMPLATES - OUTBOARD FLAP, TRAC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57904000000 | SLING - OUTER FLAP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27508230001 | GAGE - FLAP LE STEP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27508302000 | GAGE-TAPE EXTERNAL FLAP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27024-30 | SLING EQUIPM, INB TE FLAP, R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27025-28 | SLING EQUIPM - OUTB TE FLAP, R/I (CALIBRATION) (CALIBRATION) | 1 | |
| 0HME65B81110-1 | ADAPTER - HOISTING, POWER UNIT, INBOARD TRAILING EDGE FLAP | 1 | |
| 101262-04-01 | FLAP POSITION INDICATOR TEST SET CABLE, | 1 | |
| 10ME65B00116 | Strongback - Fore Flap INBD TE Flap | 3 | |
| 1125-27-50 | Flap / Slat test adapter | 1 | |
| 1159GSE40515-1 | FLAP ASSYMETRY TEST BOX | 1 | |
| 1159GSE50110-7 | FLAP PROTECTION BUMPER KIT | 1 | |
| 1159GSE50502-201 | FLAP CONTROL TEST SET | 2 | |
| 1159GSE50514 | FLAP RESOLVER KIT TEST BOX | 1 | |
| 1159GSE50514-203 | FLAP RESOLVER KIT TEST BOX | 1 | |
| 1159SEAV20315-3 | FLAP ASYMMETRY TESTER | 1 | |
| 1159SEM20375-1 | 90 DEGREE GEAR/FLAP ADAPTER | 6 | |
| 118-521046-1/810 | FLAP TRAVEL BOARD (REVISION E1 OR LATER) | 1 | |
| 11ME65B00116 | Strong back-mid flap inboardte flap | 5 | |
| 12777TOOL-F | FLAP SPLINE ADAPTER | 1 | |
| 12ME65B00116 | STRONGBACK, TE FLAP | 3 | |
| 12ME65B02000 | TORQUE ADAPTER INBOARD TRAILING EDGE FLAP, MAIN CARRIAGE | 10 | |
| 12me65b00116 | STRONGBACK AFT FLAP INBD TE FLAP | 3 | |
| 12me65b00116-1 | STRONGBACK AFT FLAP INBD TE FLAP | 1 | |
| 13ME65B00116 | TURNBUCKLE & CLIP, AFT FLAP, INBD TE FLAP | 4 | |
| 14PF465KF-1001 | FLAPS TORQUE TUBE ADAPTER | 7 | |
| 14PF465KIT | FLAPS TORQUE TUBE ADAPTER | 2 | |
| 14PF465T00L | ADAPTER FLAP DRIVE FEMALE SPLINE | 8 | |
| 14PF465TOOL | Adapter Flap/Slat Driveline − Female Spline | 8 | |
| 14PF465TOOL-M | FLAP/SLAT ADAPTER, MALE | 5 | |
| 14PF465TOOLM | Adapter Flap/Slat Driveline − Male Spline | 5 | |
| 14PF465TOOL−M | FLAP/SLAT DRIVE ADAPTER (MALE) | 5 | |
| 15ME65B00116 | strongback midflap outboard te flap | 2 | |
| 16ME65B00116 | strongback aft flap outboard te flap | 1 | |
| 1701 | ANTENNA FLOW METER FUEL FLAP | 4 | |
| 17ME65B00116 | tie clip aft flap outboard te flap | 2 | |
| 17PF465TOOL | FEMALE SPLINE ADAPTER, FLAP SLAT DRIVELINE | 1 | |
| 18-4-501DA | ADAPTER, FLAP FITTING | 1 | |
| 18ME65B00116 | Kit-Handling INBD TE Flap | 9 | |
| 190-92151-401 38H1 | SET, ALIGNMENT SUPPORT, FLAP TRACK1 & FTE | 1 | |
| 190-92151-401-38H1 | SET, ALIGNMENT SUPPORT, FLAP TRACK1 & FTE | 1 | |
| 190G92152-A01 | SET, ALIGNMENT SUPPORT, FLAP TRACK1 & FTE | 2 | |
| 190T05720-401 | SET, ALIGNMENT SUPPORT, FLAP TRACK1 & FTE | 1 | |
| 19ME65B00116 | Kit, Handling Outboard TE Flap | 8 | |
| 212-92116-0003 | GAUGE, LH OUTER FLAP | 1 | |
| 212-92116-0004 | GAUGE, RH OUTER FLAP | 1 | |
| 231500-31 | WASTE FLAP ASSY | 2 | |
| 23M65B00116 | LOCK OUTB TE FLAP | 1 | |
| 23ME65B00116 | TE FLAP LOCK | 12 | |
| 24ME65B00116 | LOCK INBOUND TE FLAP | 10 | |
| 269T9259 | Micrometer Lead Lag & Flapping Hinge | 1 | |
| 27-1-3665 | Flap System Testbox | 1 | |
| 27-1-4324 | ADAPTER-CLUTCH TORQUE, FLAP DRIVE UNIT | 2 | |
| 27.1-4324 | ADAPTER-CLUTCH TORQUE FLAP DRIVE UNIT F50 | 2 | |
| 2750-80 | FLAP/SLAT RIGGING TEST BOX | 1 | |
| 2750FAS KIT | 3/8" TEMP BOLT FLAP ACTUATER ROD END | 1 | |
| 28-0-1875 | FLAP ELECTRICAL SYSTEM TEST BOX | 1 | |
| 28-0-1875D | TEST BOX FOR ADJUSTMENT OF FLAP LIMIT SWITCHS | 2 | |
| 28-0-4085 | F100 PLATE FLAP RIGGING | 1 | |
| 28-0-4085B | PLATE FLAP AND VANE RIGGING | 1 | |
| 28-0-4230 | FLAP SELECTION AND SYNCHRO ADJUSTMENT TEST BOX | 1 | |
| 28.0-1875 | FLAP ASYMMETRY POSITION SYNCHRO TEST BOX | 1 | |
| 28MIT60B80042-1 | LOCK,L.E. FLAP, CENTER | 1 | |
| 2ME65B94003 | DISPOSITIVOS DE SEGURIDAD INTERRUPTORES DE FLAPS | 1 | |
| 2MIT65B81117-1 | B747 TE FLAP JACK SCREW SUPPORT EQUIPMNET | 9 | |
| 2MIT65B81132 | POWER UNIT -0 INBD TE FLAP | 1 | |
| 2OHME65B19400 | SLING -0 OUTBD TE FLAPS | 1 | |
| 2TE65-73720-1 | Test Equipment -Rigging Tool. Inboard Flap | 1 | |
| 3400961-1 | SLING, AIRCRAFT MAINTENANCE (FLAP INSPECTION TOOL) | 3 | |
| 3400A0000-01W01 | FLAP-, SLATSYSTEM RIGGING SPLINE ADAPTER DRIVE TOOL | 1 | |
| 35-93149-0001 | DOLLY, OUTER FLAPS | 1 | |
| 37471 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) | 1 | |
| 37472 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) | 1 | |
| 37473 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) | 1 | |
| 37474 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37475 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37481 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37482 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37483 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37484 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37485 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37491 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37492 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37493 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37495 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37501 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37502 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37503 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37504 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37505 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37511 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37512 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37513 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37514 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37515 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37541 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37542 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37543 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37544 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37545 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37551 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37552 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37553 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37554 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37555 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37561 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37562 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37563 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37564 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37565 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37571 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37572 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37573 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37574 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37575 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37581 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37582 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37583 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37584 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37585 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37591 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37592 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37593 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37594 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 37595 | Merit® Micro Mini Flap Wheels (Diameter x width: 3/8" x 3/8") (Grit: 80) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 120) (Add to cart: Add To Cart) (Diameter x width: 3/8" x 3/8") (Grit: 180) (Add to cart: Add To Cart) (Diameter x w | 1 | |
| 327265 | ADAPTER, FLAP ROLLER, GREASE | 3 | |
| 380-026-02 | BREAKOUT BOX - LEADING EDGE FLAP AND SLAT POSITION INDICATING SYSTEM | 1 | |
| 3A2983 | FLAPPER PLATE GASKET ASSEMBLY ALIGNMENT TOOL | 1 | |
| 3A2983-8 | ALIGMENT TOOL, FLAPPER PLATE GASKET ASSY | 1 | |
| 3A2983-9 | ALIGNMENT TOOL FLAPPER PLATE GASKET ASSY | 1 | |
| 3AJ65B83879 | ASSEMBLY JIG - TRAILING EDGE FLAP TRANSMISSION TORQUE LIMITER | 1 | |
| 3MIT65B02025 | BUSHING PULLER AND INSERTER - GIMBAL SUPPORT TRAILING EDGE FLAP | 2 | |
| 3MIT65B81132 | POWER UNIT -0 INBD TE FLAP | 1 | |
| 3SF3238-27-52N | FLAP TORQUE TUBE DRIVE ADAPTER | 1 | |
| 3SF3580-27-501 | FLAP OPERATE T/E CABLE | 1 | |
| 400A0000-01W01 | FLAP-, SLATSYSTEM RIGGING SPLINE ADAPTER | 1 | |
| 4080 BTB | Test flaps actuator Fokker | 1 | |
| 475000GSE2-1001 | FORCE LIMITER TEST FLAP ACTUATOR | 2 | |
| 4MIT65B04008 | LUBE ADAPTER SET - FLAP TRAILING EDGE TORQUE TUBE COUPLINGS | 8 | |
| 513.27.12.062 | MAINTENANCE ADAPTOR CABLE, FLAP | 1 | |
| 513.27.12.062 | MAINTENANCE CABLE FOR FLAPS | 1 | |
| 53172-2001 | MANUAL FLAP OPERATION ADAPTER | 3 | |
| 53207-2001 | FLAP ACTUATOR BALL SCREW ADAPTER | 3 | |
| 57547A0000-01 | FTB FLAP TRANSMISSION BRAKE TEST FIXTURE | 9 | |
| 5807007 | TEMPLATE WING FLAP | 1 | |
| 5807007-000 | TEMPLATE FLAP | 1 | |
| 5DFT65B00116 | TEST ASSEMBLY FOR TURNBUCKLE AND CLIP OUTBOARD TE AFT FLAP | 1 | |
| 5ME65B01900 | TE FLAP MAIN CARRIAGE NUT ON SPINDLE BEARING | 6 | |
| 5ME65B02000 | ADAPTER FLAP INBD T/ | 1 | |
| 5MIT65B81129 | ADAPTER ASSEMBLY - TORQUE WRENCH INBOARD TRAILING EDGE FLAP DRIVE, INBOARD TRANSMISSION | 2 | |
| 60287A0000-01 | FLAP / SLAT RIGGING TEST BOX | 1 | |
| 60287A0000-01/02 | FLAP / SLAT RIGGING TEST BOX | 1 | |
| 60287A0000-02 | FLAP / SLAT RIGGING TEST BOX | 1 | |
| 60G2756004N001 | SPLINED FLAP DRIVE ADAPTER KIT | 1 | |
| 65B81129-140 | TRANSMISSION-INBD TE FLAP | 1 | |
| 6688013-2 | AOA / FLAP INTERFACE HARNESS | 1 | |
| 6F6220A04251 | FLAP LIMITER SLEEVE | 1 | |
| 6MIT65B04017 | LE FLAP TORQUE TUBE COUPLING LUBE ADAPTER SET | 1 | |
| 6SF5661-501 | WING FLAP OPERATING BOX ADAPTER | 1 | |
| 6TE65B00114 | TEST EQUIPMENT RIGGING BAR - FLAP INSTALLATION, LEADING EDGE, WING | 13 | |
| 7074A9400-01 | SET, CHECKING, TOR-QUE LIMITER - FLAP/SLAT | 1 | |
| 734-06490-33 | TRANSMISSION AY-TE FLAP NO3 | 1 | |
| 734-06490-36 | TRANSMISSION AY-TE FLAP NO6 | 1 | |
| 734-06510-01 | GEARBOX-OUTBD ANGLE TE FLAP LH | 1 | |
| 734-06510-05 | GEARBOX-OUTBD ANGLE TE FLAP LH | 1 | |
| 734-06510-07 | GEARBOX-INBD ANGLE TE FLAP LH | 1 | |
| 734-06510-13 | GEARBOX-OUTBD ANGLE TE FLAP LH | 1 | |
| 757-27A0125 W/513-402 | FLAP DRIVE TEST KIT W/DIAL IND/W CERTS | 1 | |
| 85750700-001-89 | ADAPTER, FLAP DRIVE | 3 | |
| 8788005-1 | FLAP TEXT BOX ASSEMBLY | 2 | |
| 9090 | Test box - flap resolver (includes A/C power cable) | 5 | |
| 9109 | TEST BOX FLAP | 1 | |
| 7821343 | BALLSCREW ASSY-TE FLAP ACTUATION NO. 3 AND 6 | 1 | |
| 95-92082-003 | FLAP POTENTIOMETER TESTER | 1 | |
| 95-92118-0001 | TESTER CONTROL DE FLAPS | 1 | |
| 98275008900000 | TOOL - BRAKE TEST, FLAP LEVER | 1 | |
| 98A27503000000 | BAR-LOCKING,FLAP CONTR CABLE TENS REGUL IN O POSITION | 3 | |
| 98A27504014000 | EXTRACTOR SET-ROLLER SPIGOT PLATES-FLAP REAR TRACKS | 4 | |
| 98A27508013000 | ADAPTER DRIVE (FLAP) | 15 | |
| 98A27508015000 | SATZ KONTROLLDORNE LANDEKLAPPE O-STELLUNG CHECK PIN SET-FLAP NEUTRAL SETTING | 7 | |
| 98A27508020001 | OUTER FLAP SLING TOOL | 4 | |
| 98A27508026000 | UNTERSTUTZUNG-FLAP SPINDLE SUPPORT CRADLE-FLAP SPINDLE | 4 | |
| 98A27508027000 | TEMPLATES - OUTBOARD FLAP TRACKS 3 THRU 5 | 1 | |
| 98A27508030000 | TEMPLATE-INBOARD FLAP,TRACK 2 | 2 | |
| 98A27508031000 | HALTEVORR.-I.LANDEKL/WAGEN 1 TIE RODS-I.FLAP/CARRIAGE 1 | 1 | |
| 98A27508037000 | RIGGING PIN-OUTER FLAP | 1 | |
| 98A27508061000 | ADAPTER-FLAP DRIVE SHAFT,WING | 1 | |
| 98A27508062000 | ADAPTER - FLAP DRIVE SHAFT LH-RH WING | 3 | |
| 98A27508688000 | TEMPLATES - OUTBOARD FLAP, TRACKS 3 THRU 5 | 1 | |
| 98A2758062000 | Adapter Flap Drive | 1 | |
| 98A27803001000 | KRUEGER FLAP - FORM TEMPLATE | 6 | |
| 98A27808003001 | DRIVE TOOL - 24 TEETH ( MANUAL RETARCTION OF FLAPS ) | 15 | |
| 98A27808021000 | HYDRAULIC LOCKING TEST EQUIPMENT-KRUEGER FLAP ACTUATOR | 3 | |
| 98A32101502000 | TEMPLATE-INBOARD FLAP,TRACK 2 | 5 | |
| 98A32101502100 | TEMPLATE-INBOARD FLAP,TRACK 2 | 1 | |
| 98A57904000000 | SLING-OUTER FLAP | 8 | |
| 98A57904000001 | SLING OUTER FLAP | 2 | |
| 98A57904001000 | SLING - CENTER FLAP | 8 | |
| 98A57904001001 | SLING-CENTER FLAP | 4 | |
| 98A57904008000 | SLING-OUTER FLAP | 1 | |
| 98D27504002000 | FLAP ADJUSTER NO.1 BUSH | 11 | |
| 98D27504006000-101 | FLAP RIGGING PIN QUOTE 98D2750400600 | 1 | |
| 98D27504008000 | FLAP INTERCONNECT PIN TOOL | 26 | |
| 98D27504009000 | ADJUSTER FLAP-KINK SEAL UPPER FWD | 22 | |
| 98D2750401000 | ADJUSTER FLAP-KINK SEAL UPPER AFT | 1 | |
| 98D27504010000 | ADJUSTER FLAP-KINK SEAL UPPER AFT | 21 | |
| 98D27504017000 | TEMPLATE-FLAP BELLY SEALS | 8 | |
| 98D27504017000 | TEMPLATE-FLAP BELLY SEALS | 8 | |
| 98D27504031000 | FLAP INTERCONNECT RIG PIN TOOL | 25 | |
| 98D27504031000 | PIN-SETTING FLAP INTER STRUT | 25 | |
| 98D27504035000 | ADAPTER FLAP TRUNNION TORQUE | 20 | |
| 98D27504038000 | RIG FLAP KIT ADAPTER | 10 | |
| 98D27504038001 | RIGGING KIT,AIRCRAFT MAINTENANCE;|KIT-FLAP RIGGING; | 19 | |
| 98D27504041000 | TOOL KIT,MAINTENANCE,AIRCRAFT EQUIPMENT;|TOOL FLAP ADJUSTING;TOOL FLAP ADJUSTING; | 16 | |
| 98D27504082000 | ADAPTER SET,GROUND HANDLING EQUIPMENT;|TOOL FLAPS ADJUTING,TRACK4; | 21 | |
| 98D27504113000 | RIGGING KIT FLAP INNER & OUTER No (49) | 9 | |
| 98D27504119000 | SPANNER-FLAP ADJSTEMENT | 18 | |
| 98D27508625000 | FLAP DRIVE SYSTEM (CHECKING) | 19 | |
| 98D27803000000 | LOCKING TOOL FLAP/SLAT CENTER LEVER | 41 | |
| 98D27803000001 | LOCKING TOOL-FLAP SLAT INTERMEDIATE POSITION | 5 | |
| 98D27804001000 | ADAPTER- DRIVE, SLAT( AND FLAP) | 29 | |
| 98D2780401000 | Flap Drive Adapter | 1 | |
| 98F12108458000 | Filling adapter flap input gearbox | 8 | |
| 98F27508202000 | PIN - ADJUSTMENT, FLAP INTERCONNECTING STRUT | 15 | |
| 98F27508202040 | PIN FLAP INTERCONNECTING | 1 | |
| 98F27508204000 | TEMPLATE FLAP BELLY SEALS | 1 | |
| 98F27508206000 | PIN FLAP INTERCON STR. | 17 | |
| 98F27508209-044 | PIN FLAP INTRENT STRUT STECKER | 3 | |
| 98F27508230000 | LEHRE-FLAP GEGE-FLAP LE STEP | 1 | |
| 98F27508230001 | GAGEFLAP GAGE -0 FLAP. LOWER END STEP | 10 | |
| 98F27508230001 | Lehre flap gage flap le step | 10 | |
| 98F27508238002 | GAGE - FLAP LOWER END STEP | 11 | |
| 98F27508278000 | ADAPTER - ADJUSTMENT, FLAPS | 2 | |
| 98F27508278001 | ADAPTER - ADJUSTMENT, FLAPS | 2 | |
| 98F27508278002 | ADAPTER - RIGGING, OUTER FLAPS | 4 | |
| 98F27508278003 | ADAPTER - ADJUSTMENT, FLAPS | 2 | |
| 98F27508278004 | ADAPTER - ADJUSTMENT, FLAPS | 2 | |
| 98F27508302000 | GAGE - TAPE EXTERNAL FLAP | 9 | |
| 98F27508302001 | GAGE - TAPE EXTERNAL FLAP | 1 | |
| 98F27508302002 | GAGE - TAPE EXTERNAL FLAP | 1 | |
| 98F27508302003 | GAGE - TAPE EXTERNAL FLAP | 1 | |
| 98F27508498000 | Universal hoist inner-outer flap | 24 | |
| 98F57508702000 | ADAPTER-WRENCH,INBOARD FLAP | 4 | |
| 98F57508702001 | ADAPTER-WRENCH,INBOARD FLAP | 5 | |
| 98L27004008000 | PROTECTOR - COVER, FLAP & SLAT DRIVES | 3 | |
| 98L27004008200 | COVER PROTECTIVE-FLAP AND SLAT DRIVES | 1 | |
| 98L27004008202 | COVER PROTECTIVE-FLAP AND SLAT DRIVES | 1 | |
| 98L27004008204 | COVER PROTECTIVE-FLAP AND SLAT DRIVES | 1 | |
| 98L27004008206 | COVER PROTECTIVE-FLAP AND SLAT DRIVES | 1 | |
| 98L27503000000 | ADAPTER,FLAP PCU | 4 | |
| 98L27508481000 | PIN SET NEUTRAL SETTING FLAP SATZ ABSTECKDORNE NEUTRAL SETTING FLAP | 3 | |
| 98L27508481040 | PIN SET NEUTRAL SETTING FLAP SATZ ABSTECKDORNE NEUTRAL SETTING FLAP | 1 | |
| 98L27508481042 | PIN SET NEUTRAL SETTING FLAP SATZ ABSTECKDORNE NEUTRAL SETTING FLAP | 1 | |
| 98L27508481044 | PIN SET NEUTRAL SETTING FLAP SATZ ABSTECKDORNE NEUTRAL SETTING FLAP | 1 | |
| 98L27508481046 | PIN SET NEUTRAL SETTING FLAP SATZ ABSTECKDORNE NEUTRAL SETTING FLAP | 1 | |
| 98L27508481200 | PIN SET NEUTRAL SETTING FLAP SATZ ABSTECKDORNE NEUTRAL SETTING FLAP | 1 | |
| 98L27508481202 | PIN SET NEUTRAL SETTING FLAP SATZ ABSTECKDORNE NEUTRAL SETTING FLAP | 1 | |
| 98L27508481204 | PIN SET NEUTRAL SETTING FLAP SATZ ABSTECKDORNE NEUTRAL SETTING FLAP | 1 | |
| 98L27508481206 | PIN SET NEUTRAL SETTING FLAP SATZ ABSTECKDORNE NEUTRAL SETTING FLAP | 1 | |
| 98L27508485000 | GAGE, END - FLAP LE STEP | 3 | |
| 98L27508639000 | TOOL MAINTENANCE WTB SLAT FLAP | 1 | |
| 98L27508639001 | MAINTENANCE TOOL WTB SLAT FLAP | 7 | |
| 98L27508660000 | TOOL - BRAKE TEST, FLAP LEVER | 3 | |
| 98L27508661000 | OVERRIDE FORCE TEST FLAP LEVER | 4 | |
| 98L27508900000 | TOOL - BRAKE TEST, FLAP LEVER | 2 | |
| 98S06002511000 | Outer Flap 0° Position JIG | 3 | |
| 98S06002511001 | Outer Flap 0° Position JIG | 3 | |
| 98S27003001000 | GUARD-SAFETY FLAP CONTROL SÉCURITÉ SUR POIGNÉE VOLET SUR PYLÔNE ART 42 | 12 | |
| 98S27005003000 | TOOL-TEST BOX FLAP | 6 | |
| 98S27005008001 | SAFTEY WING FLAP ACTUATOR | 1 | |
| 98S27505001000 | WING FLAP HYDROULIC SYSTEM | 6 | |
| 98S57003013041 | Outer Flap L/RH 0° Pos JIG | 9 | |
| 98S57003013044 | OUTER FLAP CHECKING JIG-RIB.18 LH/RH | 7 | |
| 98S57003018041 | Outer Flap L/RH 0° Pos JIG | 8 | |
| 98V27004004000 | FLAP DRIVE SHAFT PROTECTOR | 8 | |
| 99041212 | TEST KIT - TRAILING EDGE FLAP ASYMMETRY (MODEL RP | 1 | |
| A-C148659-1/13 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
| A-C148659-113 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
| A0940000W2 | TOOL,USE FOR TIGHTEN KRUEGER FLAP ACTUAT | 2 | |
| A22002-72 | LEADING EDGE FLAP HEALTH TESTER | 5 | |
| A27009-7 | LOCK TE FLAPS | 20 | |
| A27016-22 | SLING EQUIPMENT, IB TE FLAP | 4 | |
| A27016-27 | Sling Equip - INBD TE Flap | 12 | |
| A27019-8 | LOCK - TE FLAPS RESTRAINT - AFT FLAP TO INBD TE FLAP SLING EQPT - INBOARD TE FLAP | 7 | |
| A27019-9 | RESTRAINT AFT FLAP TO IB TE FLAP | 1 | |
| A27027-54 | SLING EQPT, OUTBD TE FLAP | 1 | |
| A27027-59 | Sling Eqpt - Outbd TE Flap | 7 | |
| A27036 | Test Box -Flap/Slat Electronic Unit (Fseu) Power Supply/ Yaw Damper Electro Magnetic Interference (Emi) Filter | 1 | |
| A27036-16 | TEST BOX - FLAP/SLAT ELECTRONIC UNIT (FSEU) POWER SUPPLY/YAW DAMPER ELECTRO MAGNETIC INTERFERENCE (EMI) FILTER | 1 | |
| A27036-22 | TEST BOX - FLAP/SLAT ELECTRONIC UNIT (FSEU) POWER SUPPLY/YAW DAMPER ELECTROMAGNETIC INTERFACE (EMI) FILTER | 1 | |
| A27051-1 | TOOL SET - TE FLAP DRIVE AND LE SLAT DRIVE GEARBOXES | 1 | |
| A27051-31 | TOOL SET - TE FLAP DRIVE AND LE SLAT DRIVE GEARBOXES | 1 | |
| A27063-20 | ADAPTER CABLE - FLAP/ SPOILER/ COLUMN & WHEEL | 4 | |
| A27063-21 | ADAPTER CABLE - FLAP/ SPOILER/ COLUMN & WHEEL | 4 | |
| A27063-28 | ADAPTER CABLE - ELEVATOR/ FLAP PDU/ SLAT CDU | 2 | |
| A27063-84 | ADAPTER CABLE - FLAP/ SLAT/ (ARINC 429 METHOD) | 2 | |
| A27063-94 | ADAPTER CABLE - FLAP/ SPOILER/ COLUMN & WHEEL | 2 | |
| A27063-95 | ADAPTER CABLE - FLAP/ SPOILER/ COLUMN & WHEEL | 3 | |
| A27071-123 | TEST EQUIPMENT - ROTARY ACTUATOR TRAILING EDGE FLAP | 1 | |
| A27071-125 | TEST EQUIPMENT - ROTARY ACTUATOR TRAILING EDGE FLAP | 1 | |
| A27071-48 | TEST EQUIPMENT - ROTARY ACTUATOR TRAILING EDGE FLAP | 1 | |
| A27071-84 | TEST EQUIPMENT - ROTARY ACTUATOR TRAILING EDGE FLAP | 1 | |
| A27074-128 | LOCK SET - INBOARD AND OUTBOARD FLAP LINKAGE, TE | 2 | |
| A27074-146 | LOCK SET - INBOARD AND OUTBOARD FLAP LINKAGE, TE | 11 | |
| A27079-78 | TEST EQUIPMENT - POWER DRIVE UNIT, TE FLAP AND LE SLAT DRIVE | 1 | |
| A27079-89 | TEST EQUIPMENT - POWER DRIVE UNIT, TE FLAP AND LE SLAT DRIVE | 1 | |
| A27079-96 | TEST EQUIPMENT - POWER DRIVE UNIT, TE FLAP AND LE SLAT DRIVE | 1 | |
| A27093-1 | TEST EQUIPMENT - TE FLAPS ASYMMETRY FAULT ISOLATION | 2 | |
| A27093-1-27 | ADAPTER CABLE FLAP ASYM TEST | 1 | |
| A27093-24 | TE FLAPS ASIMMETRY FAULT ISOLATION | 1 | |
| A27093-27 | TEST EQUIPMENT - TE FLAPS ASYMMETRY FAULT ISOLATION | 7 | |
| A27093-27-E | TEST EQPT -0 TE FLAPS | 1 | |
| A27093-28 | TE FLAPS ASIMMETRY FAULT ISOLATION | 1 | |
| A27093-34 | TE FLAPS ASIMMETRY FAULT ISOLATION | 1 | |
| A27099-1 | SHAFT CLAMP - TE FLAP DRIVE | 10 | |
| A27102-7 | ADAPTER - LEADING EDGE SLAT AND TRAILING EDGE FLAP, MANUAL DRIVE | 14 | |
| A27102-8 | ADAPTER - LE SLAT and TE FLAP, MANUAL DRIVE | 1 | |
| A27105-9 | AUXILIARY DETENT - FLAP ADJUSTMENT ASSEMBLY | 8 | |
| A27118-1 | LE+TE FLAP LOCK EQUP | 1 | |
| A27118-111 | LOCK EQUIPMENT - INBOARD AND OUTBOARD TE, FLAP LINKAGE | 2 | |
| A27118-90 | LOCK EQUIPMENT - INBOARD AND OUTBOARD TE, FLAP LINKAGE | 2 | |
| A28002-6 | TE FLAP LOCK | 5 | |
| A57002-1 | OUTB TE FLAP EQUIP | 2 | |
| ACMANDREL | MANDREL 1/4 STEM FOR 2/3 FLAP | 1 | |
| ADTS405F | FLAP LOAD RELIEF SYSTEM | 14 | |
| AF 47316 | DISPOSITIVO DE SEGURIDAD SISTEMA HIDRÁULICO FLAPS | 1 | |
| AF-5116/1MHZ | CUSTOM S-SHAPED FLEXIBLE SURFACE PROBE FOR LOWER SURFACE FLAP TRACK INSPECTION. 500KHz-2MHz, 7.0" LONG WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5124/1MHZ | CUSTOM L-SHAPED FLEXIBLE SURFACE PROBE FOR LOWER SURFACE FLAP TRACK INSPECTION. 500KHz-2MHz, 7.0" LONG WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5125/1MHZ | CUSTOM J-SHAPED FLEXIBLE SURFACE PROBE FOR LOWER SURFACE FLAP TRACK INSPECTION. 500KHz-2MHz, 7.0" LONG WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1394 | CARGOLUX CUSTOM 5MHz .187", 40° IN ALUMINUM SHEAR WAVE TRANSDUCER WITH A 1.00" RADIUS FOR THE BOEING REFERENCE STANDARD LUG 1B7- FITTING-SEQUENCE CARRIAGE ATTACHMENT INBOARD TRAILING EDGE FLAP. CASE SIZE: .500"L x .270"W x .350". Includes Test Report... | 1 | |
| AGE---00586-001 | ADAPTER - FLAP FLEX-IBLE SHAFT | 5 | |
| AGE-00545-001 | ADAPTER - FLAP FLEX-IBLE SHAFT | 1 | |
| AGE-00568-001 | ADAPTER - FLAP FLEXIBLE SHAFT | 1 | |
| AGE-00586-001 | ADAPTER - FLAP FLEX-IBLE SHAFT | 5 | |
| AGE-00627-001 | EMB 120 FLAP ACTUATOR TEST BOX | 1 | |
| AGE-03025-401 | SET- ADAPTERS, RIGGING FLAP | 1 | |
| AGE-03248-401 | SET-ADAPTERS, RIGGING FLAP | 4 | |
| AGE-03249-403 | SET-ADAPTERS LEFT HAND, RIGGING FLAP | 3 | |
| AGE-03249-404 | SET-ADAPTERS RIGHT HAND, RIGGING FLAP | 2 | |
| AGE-03767-401 | SET, ALIGNMENT SUPPORT, FLAP TRACK1 & FTE | 1 | |
| AGE03767-401 | SET, ALIGNMENT SUPPORT, FLAP TRACK1 & FTE | 1 | |
| AGE12746 | FLAP ALTERNATE INPUT ADAPTOR | 1 | |
| AGE12927 | FLAP/SLAT TORQUE TOOLS, OUTER | 2 | |
| AGE12928 | FLAP/SLAT TORQUE TOOLS, OUTER | 2 | |
| AMI 104 | FLAP ASYMMETRY TEST BOX | 1 | |
| AN5787-1 | TRANSMITTER, FLAP INDICATOR | 1 | |
| A−C148659−1/13 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
| B141 | FLAP ASYMMETRY TEST SET 4920-00-254-8155-BP | 1 | |
| B27008-1 | LOCK-TE FLAP, POWER DRIVE | 24 | |
| B27008-2 | LOCK TE FLAP POWER DRIVE UNIT B27008-1 | 1 | |
| B27013-14 | ELECTRICAL COVERS - LE SLATS, TE FLAPS, FLAPERONS | 7 | |
| B27014-20 | Lock Eqpt-Out'b TE Flap | 10 | |
| B27016-37 | Lock Eqpt-Inb'd TE Flap | 12 | |
| B27017-1 | TEST BOX - POWER SUPPLY, FLAP SLAT ELECTRONIC UNIT (FSEU) | 1 | |
| B27018 | BREAKOUT BOX - POWER SUPPLY, FLAP/SLAT ELECTRONIC UNIT/ CONTROL SYSTEM ELECTRONIC UNIT FSEU/CSEU | 1 | |
| B27018-19 | BREAKOUT BOX - POWER SUPPLY, FLAP/SLAT ELECTRONICS UNIT/CONTROL SYSTEM ELECTRONICS UNIT (FSEU/CSEU) | 1 | |
| B27026-60 | SLING, TE FLAPS INBD/OUTBD | 2 | |
| B27028-1 | TEST EQUIPMENT - TORQUE LIMITER, TRANSMISSION TRAILING EDGE FLAP | 2 | |
| B27035 | TEST EQUIPMENT -0 TE FLAP XMSN, AFT U-JOINT & | 1 | |
| B27035-40 | TEST EQUIP TE FLAP XMSN TOOL | 1 | |
| B27035-63 | TEST EQUIPMENT - TRAILING EDGE FLAP TRANSMISSION, AFT UJOINT AND BALLSCREW | 1 | |
| B27037 | FIXTURE -0 TE FLAP TRANSMISSION TORQUE LIMITER | 1 | |
| B27037-1 | FIXTURE - TRAILING EDGE FLAP TRANSMISSION TORQUE LIMITER | 1 | |
| B27038 | TEST&OVERHAUL EQUIPMENT-ANGLE TEE GEARBOX,T.E.FLAP | 1 | |
| B27038-1 | TEST AND OVERHAUL EQUIPMENT - ANGLE TEE GEARBOX, TRAILING EDGE FLAP | 1 | |
| B27038-13 | TEST AND OVERHAUL EQUIPMENT - ANGLE TEE GEARBOX, TRAILING EDGE FLAP | 1 | |
| B27038-26 | TEST AND OVERHAUL EQUIPMENT - ANGLE TEE GEARBOX, TRAILING EDGE FLAP | 1 | |
| B27038-37 | TEST AND OVERHAUL EQUIPMENT - ANGLE TEE GEARBOX, TRAILING EDGE FLAP | 1 | |
| B27042-1 | OVERHAUL AND TEST EQUIPMENT - OUTBOARD TEE GEARBOX, INBOARD FLAP | 1 | |
| B27055-1 | CLAMP-TE FLAP | 12 | |
| B27067-1 | SLING EQUIP TE FLAP PDU REM/INST | 7 | |
| B27072 | ADAPTER KIT - OUTBD/AFT FLAP SLING | 1 | |
| B27072 REV NC | ADAPTER KIT - OUTBD/AFT FLAP SLING | 1 | |
| B27072-1 | ADAPTER KIT - OUTBOARD/AFT, FLAP SLING | 3 | |
| B27074-1 | Harness Assembly - Ballscrew Inboard TE Flap | 4 | |
| B27075 | HOIST ADAPTER -0 INST/REMOVAL, FLAP TRACK | 1 | |
| B27075-1 | HOIST ADAPTER - INSTALLATION/REMOVAL, FLAP TRACK | 1 | |
| B27075-20 | HOIST ADAPTER - INSTALLATION/REMOVAL, FLAP TRACK | 7 | |
| B57001-23 | Rem/Inst Equipment, Inboard TE Flap Torque Tube | 5 | |
| B78001-14 | LOCK TE FLAPS PDU LOCK 767 | 10 | |
| B90-124 | INSULATED ENGINE COVERS, with Heater Access Flap (set of 2) | 1 | |
| C12004-6 | SPRING TE FLAP | 17 | |
| C12005-1 | OIL GUN - TRAILING EDGE FLAP ACTUATOR, BALL SCREW, HAND OPERATED | 5 | |
| C12005-5 | Oil gun - T E flap actuator ballscrew hand operated | 14 | |
| C12005-6 | Oil gun - T E flap actuator ballscrew hand operated | 7 | |
| C12987 | FIXTURE,PRESS. TEST-FLAP | 1 | |
| C27001-51 | EQUIPMENT-TEST,FLAP SCREW BACKLASH | 15 | |
| C27017-1 | Adapter Set-Torque Wrench-TE Flaps | 3 | |
| C27022-1 | CLAMP SET - TE FLAP TORQUE TUBE | 16 | |
| C27030 | TEST EQUIPMENT-FLAP SCREW BACKLASH | 2 | |
| C27030-107 | TEST EQUIPMENT - FLAP SCREW BACKLASH | 3 | |
| C27030-1077 | TEST EQUIPMENT - FLAP SCREW BACKLASH | 1 | |
| C27030-108 | Test equipment-flap screw backlash | 2 | |
| C27030-109 | TEST EQUIPMENT - FLAP SCREW BACKLASH | 4 | |
| C27030-2 | TEST EQUIPMENT - FLAP SCREW BACKLASH | 7 | |
| C27030-33 | Test Equipment - Flap Screw Backlash | 18 | |
| C27030-34 | TEST EQUIPMENT-FLAP SCREW BAKLASH | 2 | |
| C27030-35 | TEST EQUPT. FLAPBACK | 1 | |
| C27030-49 | TOOL - FLAPSCREW TEST SET | 8 | |
| C27030-49 V.94 | Test equipment, flap screw backlash | 1 | |
| C27030-49-M | TEST EQPT/FLAP SCREW | 1 | |
| C27030-94 | Test Equipment - Flap Screw Backlash | 17 | |
| C27030-94-REVG | FLAP SCREW BACKLASH TEST EQUIP | 1 | |
| C27030-94 | EQUIPMENT - TEST FLAP SCREW BACKLASH | 17 | |
| C27040 | HOIST ADAPTER-INSTL/REMOVAL.FLAP TRACK | 1 | |
| C27040-1 | Hoist Adapter - Installation/Removal, Flap Track | 5 | |
| C27040-29 | Hoist Adapter - Installation/Removal, Flap Track (CE) | 5 | |
| C27043-1 | Seal Installation Equipment - TE Flap Drive | 1 | |
| C27043-16 | Seal TE flap drive/13ea | 3 | |
| C27048-1 | VISE ADAPTER EQPT- ACTUATOR, L.E. FLAP | 1 | |
| C27051-1 | LOCK OUT L/E SLATES AND FLAP ACT | 17 | |
| C27051-29 | LOCK OUT L/E SLATES AND FLAP ACT | 26 | |
| C27052-1 | TE FLAP SLING | 1 | |
| C27052-21 | SLING EQPT - TE FLAP | 1 | |
| C27052-25 | SLING-TE FLAP | 15 | |
| C27052-39 | TE FLAP SLING EQUPTORDER STRAPS AND ALLOW 10 DAYS FOR DELIVERY | 13 | |
| C27059-1 | Test Block Equipment -Leading Edge Flap And Slat Actuator | 3 | |
| C27067-1 | TEST EQPT - TE FLAP | 1 | |
| C27067-81 | Test Equipment - Torque Limiter, Transmission, Trailing Edge Flap | 1 | |
| C27067-82 | Test Equipment - Torque Limiter, Transmission, Trailing Edge Flap | 1 | |
| C27067-83 | TEST EQUIPMENT - TORQUE LIMITER, TRANSMISSION, TRAILING EDGE FLAP | 1 | |
| C27067-87 | Test Equipment - Torque Limiter, Transmission, Trailing Edge Flap | 2 | |
| C27067-88 | Test Equipment - Torque Limiter, Transmission, Trailing Edge Flap | 2 | |
| C27068-1 | Test Eqpt- Te Flap Drive-Gearboxes | 1 | |
| C27068-65 | Test Equipment - Trailing Edge Flap Drive Gearboxes | 5 | |
| C27072-1 | TEST EQUIPMENT - T.E. FLAP TRANSMISSION, AFT U JOI | 1 | |
| C27072-178 | Test Equipment - Trailing Edge Flap Transmission, Aft U-Joint and Ballscrew | 2 | |
| C27072-179 | Test Equipment - Trailing Edge Flap Transmission, Aft U-Joint and Ballscrew | 2 | |
| C27072-180 | TEST EQUIPMENT - TRAILING EDGE FLAP TRANSMISSION, AFT U-JOINT AND BALLSCREW (CE) | 1 | |
| C27072-2 | TEST EQPT-TE FLAP | 1 | |
| C27072-92 | TEST EQUIPMENT - TRAILING EDGE FLAP TRANSMISSION, AFT UJOINT AND BALLSCREW | 1 | |
| C27072-93 | TEST EQUIPMENT -0 T.E. FLAP TRANSMISSION, AFT U- | 1 | |
| C27072-94 | TEST EQUIPMENT - TRAILING EDGE FLAP TRANSMISSION, AFT UJOINT AND BALLSCREW | 1 | |
| C27074-1 | Overhaul Equp, Spring Stack, TE Flap Trans | 4 | |
| C27076-9 | Adapter torsion Rod Inst L.E Flap | 4 | |
| C27079-1 | TE INBD FLAP HOLDING EQUIP | 7 | |
| C27081-1 | Extender Box -Flap/Slat Proximity Sensors (Flap/Slat Indication Module) | 2 | |
| C27084 | TEST EQUIPMENT-OUTBD T.E.FLAP TRANSMISSION,NO-BACK BRAKE OPERATIONAL TEST | 1 | |
| C27084-1 | Test Equipment - Outboard Trailing Edge Flap Transmission, No-Back Brake Operational Test | 14 | |
| C27084-1 | TEST EQUIPMENT OUTBOARD T.E FLAP TRANSMISSION NO BACK BRAKE OP TEST | 14 | |
| C27108-1 | CABLE SET - TRAILING EDGE (TE) FLAP ASYMMETRY AND LOCKOUT PREVENTIVE MEASURES | 2 | |
| C27110-1 | TEST EQUIPMENT - TRAILING EDGE FLAP ASYMMETRY | 1 | |
| C6HF1025-1 | PLATE RETAINING FLAP ACTUATOR | 1 | |
| CA32300-1 | LH OUTER FLAP PROTRACTOR | 1 | |
| CA32300-2 | RH OUTER FLAP PROTRACTOR | 1 | |
| CC04488-001-AZL | LOCKING COLLAR FOR FLAP LOCK OF AIRCRAFT FLIGHT SYSTEM | 1 | |
| CCSC2750-01 | Flap Test box | 2 | |
| CCSC2750−01 | Breakout Box − Flaps System 27−50−16 | 2 | |
| CF65B81117 | CHECKING FIXTURE EQPT-BALL NUT,TE FLAP DRIVE | 1 | |
| CF65B81128 | Checking Fixture - Outbd Xmsn Outbd TE Flap Drive | 1 | |
| CHA700-224 | A320 FLAP BACKLASH TOOL,DIAL TEST IN | 6 | |
| CTS320E1A | TEST BOX FLAP | 6 | |
| DSA254 | DA-‐42 FLAP TEMPLATE | 1 | |
| DZZ0019-501 | FLAP ADAPTER TORQUE | 1 | |
| EMB-01551-001 | BOX,TEST-FLAP CONTROL UNIT | 1 | |
| EMB-015510-011 | FLAP CONTROL UNIT TEST SET | 1 | |
| F-70300-1 | FLAP DRIVE ADAPTER | 24 | |
| F-80167-1 | TE FLAP CARRIAGE ROLLER LUBRICATION SET | 2 | |
| F2MA927522100 | MEASURING FIXTURE FOR FLAP INTERMEDIATE TRANSFER GEARBOX BACKLASH AND TORQUE | 1 | |
| F70067 | ADAPTER -0 SPLINED SHAFT,INBD.FLAP DRIVE USED TO | 1 | |
| F70131 | KIT -0 FLAP POSITION TRANSMITTER ASSY. USED FOR | 1 | |
| F70179 | DRILL JIG ASSY -0 FLAP TRACK & SPOILER TO LOCATE | 1 | |
| F70300-1 | Adapter - Flap Drive | 24 | |
| F70300-1-M | FLAP DRIVE ADAPTER | 1 | |
| F703001 | ADAPTER FLAP DRIVE | 24 | |
| F70340 | FUNCTIONAL TEST EQUIPMENT -0 FLAP AND SPOILER | 1 | |
| F72786-122 | ADAPTER FLAP POSITION TRANSMITTER SWITCHING | 1 | |
| F72786-157 | ADAPTER FLAP POSITION TRANSMITTER | 1 | |
| F72800-1 | LLAVE AJUSTE TUERCA CARDAN TRANSMISIÓN FLAP | 1 | |
| F72800-2 | LLAVE AJUSTE TUERCA CARDAN TRANSMISIÓN FLAP | 1 | |
| F72801 | KIT -0 FLAP POSITION TRANSMITTER ASSY USED TO | 1 | |
| F72802-1 | Wrench-flap xmsn torque limiter collar | 2 | |
| F72803 | WRENCH -0 FLAP TRANS. TORQUE LIMITER USED TO | 1 | |
| F72803-1 | Wrench-flap xmsn torque limiter，lock nut | 2 | |
| F72805-1 | Wrench-flap xmsn torque limiter，spring retainer | 2 | |
| F72806 | WRENCH -FLAP TRANSMISSION TORQUE LIMITER USED | 1 | |
| F72831-1 | TEST FIXTURE - FLAP POSITION TRANSMITTER | 1 | |
| F72831-10 | TEST FIXTURE - FLAP POSITION TRANSMITTER | 1 | |
| F72831-14 | TEST FIXTURE - FLAP POSITION TRANSMITTER | 1 | |
| F72831-21 | TEST FIXTURE - FLAP POSITION TRANSMITTER | 1 | |
| F72883 | ADAPTER ASSY SET USED TO LUBRICATE AFT FLAP | 1 | |
| F72883-10 | Adapter assy set-lubrication fitting，track roller，AFT flap | 4 | |
| F72897 | SPANNER WRENCH -0 THRUST NUT- TE FLAP CARRIAGE. | 1 | |
| F72975 | BEARING INSTL TOOL-TORQ LIMITER-FLAP | 1 | |
| F72975-1 | BEARING INSTALLATION TOOL - TORQUE LIMITER, FLAP TRANSMISSION | 1 | |
| F73000 | UNIT-TEST DRIVE, TE FLAP TRANSMISSION USED TO | 1 | |
| F73000-105 | FLAP TRNNY TEST DRV | 1 | |
| F73005 | TEST EQUIPMENT-INBOARD AND OUTBOARD FLAP | 1 | |
| F73005-80 | Test Equip - Inbd / Outbd Flap Transmission | 1 | |
| F800-F810 | INTERFACE CABLE - UN-ATE FLAP SLAT ELECTRONICS UNIT | 1 | |
| F80049-2 | LOCK ASSEMBLY - FLIGHT CONTROLS (FLAP BY-PASS VALVE AND HYDRAULIC INTERCONNECT ELECTRICAL CONTROL BLOCKING TOOL)(AFT) (S (THE BOEING COMPANY) | 6 | |
| F80049-46 | LOCK TE FLAP BYPASS VALVE | 17 | |
| F80122-1 | Adapter Flap Drive Transmission | 1 | |
| F80122-11 | ADAPTER EQUIPMENT - TORQUE WRENCH, FLAP DRIVE TRANSMISSION | 2 | |
| F80122-12 | FLAP DRIVE TORQUE ADAPTER | 5 | |
| F80122-13 | Adapter Equ -torque Wrench Flap Dr Tran | 2 | |
| F80122-14 | U-joint Adapter Equ flap | 13 | |
| F80122-15 | U-joint Adapter Equ flap | 12 | |
| F80122-16 | Adopter Equ Flap Drive Transmition | 11 | |
| F80122-2 | ADAPTER FLAP | 1 | |
| F80122-4 | Adapter Flap Drive Transmission | 5 | |
| F80122-XX | Adapter Equipment -Torque Wrench. Flap Drive Transmission | 1 | |
| F80167-1 | LUBE TOOLSET-TE FLAP CARRIAGE ROLLER | 2 | |
| F80167-13 | LUBE KIT TE FLAP CARRIAGE | 19 | |
| F80167-14 | Lubrication Tool Set - TE Flap Carriage Roller | 1 | |
| F80167-15 | Lubrication Tool Set - TE Flap Carriage Roller | 2 | |
| F80186-1 | ALIGNMENT FIXTURE TE FLAP DRIVE RIGHT ANGLE GEAR B | 1 | |
| F80186-10 | ALIGNMENT FIX TE FLAP DR RT& GAERBOX | 7 | |
| F80213-73 | INBD TE FLAP SLING | 11 | |
| F80213-78 | OUTBD TE FLAP SLING | 12 | |
| F80213-78-M | OUTBD TE FLAP SLING | 1 | |
| F80216-1 | Miscellaneous Tool -Support Assembly. Transmitter. Flap Position | 3 | |
| F80216-2 | MISCELLANEOUS TOOL - SUPPORT ASSEMBLY TRANSMITTER, FLAP POSITION | 1 | |
| F80232 | Test fixture-control valve assy,T.E. flap | 1 | |
| F80232-1 | Test Fixture - Control Valve Assembly, Trailing Edge Flap | 3 | |
| F80245-1 | Restraint Equipment - Outboard TE Flap Tracks | 1 | |
| F80265-1 | TEST MANIFOLD LEADING EDGE FLAP ACTUATOR | 3 | |
| F80266-30 | Test Equipment-L.E. Flap Actuator | 1 | |
| F80266-40 | Test Equipment -Leading Edge Flap Actuator | 1 | |
| F80323-1 | TEST FIXTURE -CONTROL VALVE ASSEMBLY,TRAILING EDGE FLAP | 1 | |
| FLAP DRIVE ADAPTER | FLAP DRIVE ADAPTER TOOL | 1 | |
| FPK-PRO-104 | PRO - COMPLETE KIT PEENING, FLAPPER PEENING KIT | 2 | |
| FPK-PRO-105 | FLAPSPEED PRO - COMPLETE KIT | 2 | |
| FTE-04-35-15000-1 | PROTRACTOR OUTER FLAP | 1 | |
| FTE04-35-15000 | Outer Flap Setting Gauge | 1 | |
| FTE04-35-15000-1 | OUTER FLAP SETTING GAGE LH | 1 | |
| FTE04-35-15000-1(LH) | OUTER FLAP SETTING GAUGE | 1 | |
| FTE04-35-15000-2 | OUTER FLAP SETTING GAGE RH | 1 | |
| FTE04-35-15000-2(RH | OUTER FLAP SETTING GAUGE | 1 | |
| G0142750002 | KIT, FLAPS CHECK TEMPLATES | 1 | |
| G27003 | TEST EQPT -0 XMSN & TORQUE LIMITER, TE FLAP | 1 | |
| G27003-1 | TEST EQUIPMENT - TRANSMISSION AND TORQUE LIMITER, TRAILING EDGE FLAP | 1 | |
| G27003-55 | TEST EQUIPMENT - TRANSMISSION AND TORQUE LIMITER, TRAILING EDGE FLAP | 1 | |
| G27003-80 | TEST EQUIPMENT - TRANSMISSION AND TORQUE LIMITER, TRAILING EDGE FLAP | 1 | |
| G27006-16 | Swaging eqpt-seal ring，inbd xmsn，outbd te flap drive | 2 | |
| G27009 | TEST BOX -0 ALTERNATE DRIVE MOTOR L/E FLAP | 1 | |
| G27009-19 | TEST BOX - ALTERNATE DRIVE MOTOR, LEADING EDGE FLAPS | 4 | |
| G27011-1 | SPLINE ADAPTER - TORQUE SENSOR, INBOARD AND OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| G27020 | SPLINE ADAPTER -0 OUTBD XMSN, INBD T.E. FLAP | 1 | |
| G27020-1 | SPLINE ADAPTER - OUTBOARD TRANSMISSION, INBOARD TRAILING EDGE FLAP DRIVE | 2 | |
| G27022 | TEST EQUIPMENT -0 BACKLASH, L.E. FLAP ROTARY | 1 | |
| G27022-14 | TEST EQUIPMENT - BACKLASH, LEADING EDGE FLAP ROTARY ACTUATOR | 1 | |
| G27024-1 | TE FLAP LEVER LOCK ASSY | 9 | |
| G27025 | TEST EQPT -0 T.E. FLAP ALTERNATE DRIVE MOTOR | 1 | |
| G27025-1 | TEST BOX -0 TE FLAP ALTERNATE | 1 | |
| G27025-22 | TEST EQUIPMENT - TRAILING EDGE FLAP ALTERNATE DRIVE MOTOR CURRENT | 1 | |
| G27025-23 | TEST EQUIPMENT - TRAILING EDGE FLAP ALTERNATE DRIVE MOTOR CURRENT | 1 | |
| G27025-24 | TEST EQUIPMENT - TRAILING EDGE FLAP ALTERNATE DRIVE MOTOR CURRENT | 1 | |
| G27025-25 | TEST EQUIPMENT - TRAILING EDGE FLAP ALTERNATE DRIVE MOTOR CURRENT | 1 | |
| G27025-4 | TEST EQUIPMENT - TRAILING EDGE FLAP ALTERNATE DRIVE MOTOR CURRENT | 1 | |
| G27026 | TEST FIXTURE -0 INBD/OUTBD TE FLAP DRIVE POWER | 1 | |
| G27026-1 | TEST FIXTURE - INBOARD AND OUTBOARD TRAILING EDGE FLAP DRIVE POWER PACK | 1 | |
| G27027-44 | CONTROL BOX EQUIP. - POWER PACK, TE FLAP DRIVE | 1 | |
| G27034-1 | SPLINE ADAPTER - ANGLE GEARBOX DRIVE, INBOARD TRAILING EDGE FLAP | 1 | |
| G27037 | LOCK EQUIPMENT -0 T.E. FLAP SYSTEM | 1 | |
| G27037-1 | LOCK EQUIPMENT - TRAILING EDGE FLAP SYSTEM | 2 | |
| G27037-13 | LOCK EQUIPMENT - TRAILING EDGE FLAP SYSTEM | 8 | |
| G27037-21 | LOCK EQUIPMENT - TRAILING EDGE FLAP SYSTEM | 6 | |
| G27038-1 | RIGGING BAR -0 TEFLAP | 3 | |
| G27046-119 | FUNCTIONAL TEST EQUIPMENT - TRAILING EDGE FLAP TRANSMISSION | 1 | |
| G27046-138 | FUNCTIONAL TEST EQUIPMENT - TRAILING EDGE FLAP TRANSMISSION | 1 | |
| G27047-54 | SLING TE FLAP CARRIAGE | 4 | |
| G27047-59 | Install/Rem Sling Eqpt- Main Carriage Assy TE Flap | 2 | |
| G27047-63 | TE FLAPS MAIN CARRIAGE ASSY SLING | 1 | |
| G27049-74 | Rmvl/Instl Eqpt - Outboard TE Flap | 5 | |
| G27052-135 | Handling Kit - Inboard TE Flap | 4 | |
| G27055-1 | ADAPTER - HOISTING, POWER UNIT, INBOARD TRAILING EDGE FLAP (CE) | 2 | |
| G27056-1 | HOIST ADAPTER - POWER DRIVE UNIT, OUTBOARD TRAILING EDGE FLAP (CE) | 3 | |
| G27062 | TEST ASSY -0 INBD & OUTBD FORE FLAP OF OUTBD TE | 1 | |
| G27062-1 | TEST ASSEMBLY - INBOARD AND OUTBOARD FOREFLAP OF OUTBOARD TRAILING EDGE FLAP | 1 | |
| G27063-69 | Lock Eqpt-TE Flaps and Carriages | 4 | |
| G27063-76 | Lock Equipment - TE Flaps and Carriages | 6 | |
| G27064-31 | ADAPTER - TRAILING EDGE FLAP ACTUATOR, REMOVAL/INSTALLATION (CE) | 5 | |
| G27067 | CHECKING FIXTURE EQPT-BALL NUT,TE FLAP DRIVE | 1 | |
| G27067-1 | Checking fixture eqpt-ball nut，te flap drive | 5 | |
| G27067-2 | Checking fixture eqpt-ball nut，te flap drive | 3 | |
| G27067-80 | Checking fixture eqpt-ball nut，te flap drive | 5 | |
| G27067-81 | Checking fixture eqpt-ball nut，te flap drive | 5 | |
| G27068-1 | Ball Screw Support - TE Flap Drive | 4 | |
| G27073-1 | Bootstrap Clamp Equipment - Fairing TE Flap Track | 5 | |
| G27078-1 | Pin Puller Eqpt-Bogie Outboard TE Flaps Carriage | 2 | |
| G27079-1 | Rmvl/Instl Eqpt-FWD Attach Fitting, Inbd TE Flaps | 3 | |
| G27080-1 | WORK STAND - CARRIAGE ASSEMBLY, OUTBOARD TE FLAP | 1 | |
| G27081-1 | WORK STAND - CARRIAGE ASSEMBLY, INBOARD TE FLAP | 1 | |
| G27082-1 | Torque Adapter - Flap Track Installation | 1 | |
| G27082-12 | TORQUE ADAPTER - FLAP TRACK INSTALLATION | 1 | |
| G27084-1 | HANDLING DOLLY-FAIRING TE FLAP TRACK | 6 | |
| G27091-1 | SPLINE ADAPTERS - ANGLE GEARBOX DRIVE, INBOARD AND OUTBOARD TRAILING EDGE FLAPS | 5 | |
| G27096-1 | RIGGING TOOL - SKEW SENSOR, TE FLAPS | 3 | |
| G27097-1 | DISASSEMBLY/ASSEMBLY EQUIPMENT - FLAP FLAG DETECTION SYSTEM ASSEMBLY | 1 | |
| G27098-42 | Hoisting Eqpt - Inbd TE Flap Actuator Pos 4 and 5 | 5 | |
| G27103-1 | Rem/Instl Eqpt - Inbd TE Flap | 1 | |
| G27103-35 | EQUIP TE FLAP BALLSC | 2 | |
| G27104-1 | REMOVAL/INSTALLATION EQUIPMENT - VARIABLE CAMBER FLAP PANEL HINGE FASTENERS | 1 | |
| G600-270051-1 | KIT- FLAP POSITION TRANSMITTER | 2 | |
| G600-270051-1 | KIT, ADJ FLAP POSTN XMITTER | 2 | |
| G600-275016-1 | BREAKOUT BOX - FLAPS SYSTEM | 4 | |
| G600-2750161 | BREAKOUT BOX - FLAPS SYSTEM | 4 | |
| G600-275016???1 | BREAKOUT BOX - FLAPS SYSTEM | 4 | |
| G600-275016−1 | BREAKOUT BOX - FLAPS SYSTEM | 4 | |
| G600-275019-1 | REVOLUTION COUNTER FLAP FLEXIBLE DRIVE SHAFT | 1 | |
| G600275016 | BREAKOUT BOX − FLAPS SYSTEM | 1 | |
| G600−270052−1 | FLAP ACTUATOR TQ CHECK ADAPTER | 5 | |
| G600−275016−1 | BREAKOUT BOX − FLAPS SYSTEM | 4 | |
| G700-27110-3-31 | KIT - RIG PINS AILERON CONTROL SYSTEM AND FLAP | 5 | |
| G700-271103-31 | Kit - Rig Pins Aileron Control System And Flaps | 5 | |
| G700-271103−31 | KIT - RIG PINS AILERON CONTROL SYSTEM AND FLAPS | 5 | |
| G700???271103???31 | KIT ??? RIG PINS AILERON CONTROL SYSTEM AND FLAPS | 5 | |
| G700−271103-31 | KIT - RIG PINS AILERON CONTROL SYSTEM AND FLAPS | 5 | |
| G700−271103−31 | KIT − RIG PINS AILERON CONTROL SYSTEM AND FLAPS | 5 | |
| GS20227-1 | ADAPTER, TORQUE PC FLAPPER | 1 | |
| GS21290-1 | ADAPTER, FLAPPER SETTING | 2 | |
| GSB2750003 | FLAP DRIVE ADAPTER | 1 | |
| GSE 064 | ADAPTER,DRIVE FLAP | 1 | |
| GSE 27X-11-03 | KIT - RIG PINS AILERON CONTROL SYSTEM AND FLAPS | 1 | |
| GSE-064 | ADAPTER-FLAP FLEXIBLE SHAFT | 1 | |
| GSE2700481 | FLAP ASYMMETRY TEST BOX | 1 | |
| GSE2720139 | FLAP / SLAT RIGGING TEST BOX | 1 | |
| GSE2720570 | SPLINED FLAP DRIVE ADAPTER KIT | 1 | |
| GSE336 | SET, ALIGNMENT SUPPORT, FLAP TRACK1 & FTE | 1 | |
| GSE702004-001 | FIXTURE - RIGGING AND MAINTENANCE INTER-FACE, FLAP ACTUATION SYSTEM | 2 | |
| HFR300304 | FLAP/SLAT PPU TEST ADJ | 1 | |
| HS8111 | FLAPPER VALVE WRENCHING ADAPTER | 1 | |
| HT100 | TACHOMETER FOR FLAP PEEN KIT TOOL | 1 | |
| J270021-1 | FLAP DRIVE ADAPTER | 1 | |
| J27006-43 | SLING EQUIPMENT, OUTBOARD TE FLAP | 8 | |
| J27011-23 | Sling Eqpt - Inbd TE Flap | 4 | |
| J27011-39 | Sling Eqpt - Inbd TE Flap | 8 | |
| J27015-1 | SPLINE ADAPTER,FLAP PDU | 7 | |
| J27015-2 | SPLINE ADPT. LE/TE FLAP PDU | 1 | |
| J27021-1 | DRIVE ADAPTER - TORQUE TUBE COUPLING, T.E. FLAP | 10 | |
| J27023-26 | R/I Equipment-Trans TE Flap | 1 | |
| J27023-33 | Rmvl Inst Eqpt-Transmission TE Flap | 1 | |
| J27023-54 | Rmvl Inst Eqpt - Transmission, TE Flap | 6 | |
| J27035-41 | ADAPTER HANDLE FLAP | 2 | |
| J27035-59 | LOCK TE FLAP | 8 | |
| J27037 | ELECTRICAL COVERS-LE SLAT,TE FLAPS,FLAPERONS | 1 | |
| J27037-1 | ELECTRICAL COVERS - LE SLATS, TE FLAPS, FLAPERONS | 12 | |
| J27037-19 | Electrical covers-le slats，te flaps，flaperons | 1 | |
| J27037-2 | Elec. Covers - LE Slats, TE Flaps Part | 4 | |
| J27037-3 | Elec. Covers - LE Slats, TE Flaps Part | 1 | |
| J27037-4 | Elec. Covers - LE Slats, TE Flaps Part | 5 | |
| J27040 | Lock - Electrical TE Flaps | 1 | |
| J27043-1 | Clamp Equipment - Drive Shaft TE Flap | 3 | |
| J27043-18 | Clamp Eqpt - Drive Shaft TE Flap | 11 | |
| J27051-1 | WRENCH - WING TE FLAP SUPPORT NUT | 9 | |
| J27065-1 | TEST EQUIPMENT - POWER DRIVE UNIT, FLAP | 1 | |
| J27068-33 | TEST EQUIPMENT - TRAILING EDGE FLAP ACTUATION | 1 | |
| J27068-83 | TEST EQUIPMENT - TRAILING EDGE FLAP ACTUATION TRANSMISSIONS | 1 | |
| J27080-1 | HOLDING FIXTURE - TE FLAP, ANGLE GEARBOX | 1 | |
| J27083 | ADAPTER CALE TESTER FLAP SKEW SENSOR | 1 | |
| J27083-1 | Adapter Cable - Tester Flap Skew Sensor | 2 | |
| J27084-1 | TE Flap Transmission | 1 | |
| J27084-72 | Test Equipment - TE Flap Transmission | 5 | |
| J27084-79 | TEST EQUIPMENT - TRAILING EDGE FLAP TRANSMISSION, NO-BACK BRAKE OPERATION TEST | 5 | |
| J27091-1 | CRADLE AND SLING - ROTARY GEAR ACTUATOR, TE FLAP | 1 | |
| J27108-1 | Drive adapter-drive line coupling,flap and slat | 1 | |
| J27108-13 | Drive adapter-drive line coupling,flap and slat | 1 | |
| J27110 | WRENCH - NUT, WING TE FLAP SUPPORT SPL-15305 | 1 | |
| J27110-1 | WRENCH - NUT, WING TE FLAP SUPPORT SPL-15305 | 1 | |
| J27111-1 | B-pin removal/instl tool -te flap | 2 | |
| J27118 | LOCK EQPT – OUTER FLAP SUPPORTS 1 & 12 AND 2 & 11 SPL-16044 | 1 | |
| J27118-1 | Lock eqpt-outer flap | 1 | |
| J27133-1 | Cradle equipment-pdu teflap,inbd/mid/outbd | 1 | |
| K10010 | TETHERING EQPT -0 INBD & OUTBD FLAP SUPPORT | 1 | |
| K10010-1 | Tether - Flap Fittings, Inboard and Outboard | 1 | |
| K10010-21 | TETHERING EQUIPMENT - INBOARD AND OUTBOARD FLAP SUPPORT | 1 | |
| K10010-22 | TETHERING EQUIPMENT - INBOARD AND OUTBOARD FLAP SUPPORT | 1 | |
| K27002-1 | Adapter - TE Flap Geared Rotary Actuator, Removal | 1 | |
| K27012 | Drive Adapter -Torque Tube Coupling. Leading Edge Slat And Trailing Edge Flap | 1 | |
| K27013 | ELECTRICAL COVERS -0 LE SLATS, TE FLAPS, | 1 | |
| K27013-1 | Electrical Covers - LE Slats TE Flaps & Flaperons | 11 | |
| K27019 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-1 | Lock Equipment - TE Flap | 1 | |
| K27019-10 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-11 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-12 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-13 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-14 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-15 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-19 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-22 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-23 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-25 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-26 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-27 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-29 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-30 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-31 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-32 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-33 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-34 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-35 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-36 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-37 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-40 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-41 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-42 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-44 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-45 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-46 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-49 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-5 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-55 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-56 | Lock equipment-te flap | 1 | |
| K27019-57 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-58 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-6 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-60 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-61 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-62 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-63 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-66 | Lock equipment-te flap | 1 | |
| K27019-70 | Lock Eqpt - TE Flap | 1 | |
| K27019-81 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27019-82 | Lock Equipment - TE Flap | 1 | |
| K27019-83 | Lock Equipment - TE Flap | 5 | |
| K27019-84 | Lock Equipment - TE Flap | 3 | |
| K27019-85 | Lock Equipment - TE Flap | 5 | |
| K27019-85 | LOCK EQUIPMENT-TE FLAP | 5 | |
| K27019-9 | LOCK EQUIPTMENT-TE FLAP | 1 | |
| K27024 | SLING EQUIPMENT -0 INBOARD TE FLAP, REMOVAL AND | 1 | |
| K27024-1 | Sling Eqpt - Inbd TE Flap | 1 | |
| K27024-21 | Sling equipment-inboard te flap，removal and installation | 1 | |
| K27024-21 Upgrade | Sling equipment-inboard te flap，removal and installation | 1 | |
| K27024-25 | SLING EQPT, INBOARD TE FLAP, REMOVAL/INSTALLATION | 3 | |
| K27024-30 | Sling Equipment - Inboard TE Flap Rmvl / Instl | 3 | |
| K27024-30-REVD | SLING EQUIPMENT - INBOARD TE FLAP REMOVAL AND INSTALLATION | 1 | |
| K27024-59 | SLING EQPT - INBOARD TE FLAP | 6 | |
| K2702459 | SLING EQPT, INBOARD TE FLAP, REMOVAL/INSTALLATION | 6 | |
| K27025 | SLING EQUIPMENT- OUTBOARD TE FLAP, REMOVAL AND | 1 | |
| K27025-1 | Sling Eqpt - Outboard TE Flap | 1 | |
| K27025-21 | Sling equipment-outboard te flap，removal and installation | 1 | |
| K27025-25 | SLING EQPT, OUTBOARD TE FLAP, REMOVAL/INSTALLATION | 1 | |
| K27025-28 | Sling Equipment - Outboard TE Flap Rem / Instl | 8 | |
| K27032 | PIN PULLER EQPT -0 DRIVE LINK, OUTBOARD TE FLAP | 1 | |
| K27032-1 | Pin Puller - Drive Link, Outboard TE Flap | 7 | |
| K27033-1 | Wrench Set - Wing TE Flap Support Nut | 3 | |
| K27036-1 | Wrench Eqpt - Eccentric Bushing TE Flaps | 8 | |
| K27036-1 | WRENCH EQPT-ECCENTRIC BUSHINGADJUSTMENT,TE FLAPS | 8 | |
| K27039-1 | RIGGING EQPT-TE FLAPS | 4 | |
| K27039-1-REVA | RIGGING EQUIPMENT - TE FLAPS | 1 | |
| K27039-15 | Rigging eqpt-te flaps | 6 | |
| K27039-16 | Rigging eqpt-te flaps | 2 | |
| K27040 | CLAMP EQPT-DRIVE SHAFTS,LE SLATS & TE FLAPS | 1 | |
| K27040-1 | Clamp Eqpt - Drive Shafts, LE Slats & TE Flaps | 9 | |
| K27052-1 | R/I Eqpt - Torque Tube, Inboard TE Flap | 1 | |
| KC135-204 | MAIN GEAR TIRE COVERS, single cover per tire set, w/ preheater access flap (set of 2) | 1 | |
| LM | FLAP ELECTRICAL TEST CABLE | 1 | |
| M346 SPAR 4 STD-1 | CUSTOM REFERENCE STANDARD, H346 SPAR 4 STD-1 HOLE INTERFACE WITH FLAPS HINGE REWORK. MATERIAL: 7050-T7451 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| M476 | FLAP POSITION TRANSMITTER NO4 | 1 | |
| MA270001-1 | LOCK TE FLAPS | 1 | |
| MA270002-1 | ADAPTER, LE SLAT AND TE FLAP, MANUAL DRIVE | 1 | |
| ME60B80080-1 | FLAP T/E LOAD ACTUATOR TEST BAR | 1 | |
| MIT65-45108-156 | TE Wing Flap Drive Installation Alignment Checking Tool | 1 | |
| MIT65-56638-1 | MISCELLANEOUS TOOL - SUPPORT ASSEMBLY, TRANSMITTER, FLAP POSITION | 1 | |
| MIT65B01925 | Restraining tool-inbd,outbd actuator fitting,outrd ,TE.mid flap | 1 | |
| MIT65B02025 | TORQUE WRENCH ADAPTER ASSEMBLY - MIDFLAP INBOARD TRAILING EDGE | 1 | |
| MIT65B04008 | ADAPTER DRIVE FLAP | 8 | |
| MIT65B04017 | LUBE ADAPTER SET - FLAP LEADING EDGE TORQUE TUBE COUPLING | 4 | |
| MIT65B10712 | DISPOSITIVO SEGURIDAD FLAPS BORDE SALIDA INTERIOR | 1 | |
| MIT65B15171 | TORQUE ADAPTER - VARIABLE CAMBER FLAPS HINGE NUT | 3 | |
| MIT65B81132 | POWER UNIT -0 INBD TE FLAP | 1 | |
| MIT65B81133 | Misc tool power unit assy-outbd teflap drive | 1 | |
| MIT65B81561 | SPLINE ADAPTER - OUTBOARD FLAP DRIVE | 4 | |
| MIT69-49525-2 | LLAVE ADAPTADOR TUERCA CARRO FLAP INTERIOR | 1 | |
| MK466 | BENCH TEST RIG FOR GEARBOXES SLAT AND FLAP | 1 | |
| MTTG0120 | FLAP PEEN TOOL - MYTECHNIC | 1 | |
| OHME113U1801-101 | IBFLAP SIDEPLATE | 1 | |
| OHME65B00110-53 | BOOTSTRAP CLAMP - TE FLAP | 5 | |
| OHME65B01925 | Sling assy rotating mid flap inbd outbd te flap | 2 | |
| OHME65B81110-1 | ADAPTER - HOISTING, POWER UNIT, INBOARD TRAILING EDGE FLAP | 1 | |
| OHME65B81111-3 | ADAPTER - HOISTING, POWER UNIT, OUTBOARD TRAILING EDGE FLAP | 1 | |
| P0040T | PLATE TRAILING EDGE FLAP | 1 | |
| PME65B00110-53 | HANDLING DOLLY - TE FLAP TRACK | 5 | |
| PRESSURE-TEST-SET | PRESSURE TEST FLAP SYSTEM | 1 | |
| RBT101741-101 | CENTERING TOOL, TAIL ROTOR FLAPPING AXIS | 3 | |
| RP-1212 | TEST KIT - TRAILING EDGE FLAP ASYMMETRY | 1 | |
| SJA-3 | Flap Asymmetry Test Box | 1 | |
| SPCK-182 | ULTRASONIC KIT- OUTBOARD MIDFLAP CARRIAGE SPINDLES. B737 PART 4 57-50-02. INCLUDES NDT3038, NDT3038-P1, SUC 166-8T(AFC-525-8T) ABNC-MD6( BNC-MICRODOT CABLE), 8 OZ BOTTLE COUPLANT. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| SPL-10890 | BALL SCREW SUPPORT - TE FLAP DRIVE | 1 | |
| SPL-10895 | ADAPTER - TRAINING EDGE FLAP ACTATOR R/I | 1 | |
| SPL-12536 | TEST EQUIPMENT OUTBOARD T.E FLAP TRANSMISSION NO BACK BRAKE OP TEST | 1 | |
| SPL-5076 | TEST BOX - ALTERNATE DRIVE MOTOR, L.E. FLAPABM ALL; 747-400F SUPPLIER: 81205 | 1 | |
| SPL-5385 | Seal Installation Equipment, TE Flap Drive | 1 | |
| SPL-7229 | EQUIPMENT - SLING, INBOARD TE FLAP | 1 | |
| ST2583-1 | ADAPTER FLAP DRIVE | 1 | |
| ST6396 | TEST STAND-TE FLAP TRANSMISSION | 1 | |
| ST992B | ADAPTER - GREASE GUN - FLAP EXHAUST GATE | 9 | |
| ST992B, | ADAPTER - GREASE GUN - FLAP EXHAUST GATE | 9 | |
| STS 060602 | TEXT BOX, FLAP CONTROL | 1 | |
| STS060602 | TEST BOX, FLAP CONTROL | 1 | |
| T101741-101 | CENTERING TOOL, TAIL ROTOR FLAPPING AXIS | 2 | |
| TE65-73720-1 | TEST EQUIPMENT - RIGGING TOOL, OUTBOARD FLAP | 1 | |
| TE65-73720-1 -2 | Test Equipment -Rigging Tool. Outboard Flap | 1 | |
| TE65-73720-2 | TEST EQUIPMENT - RIGGING TOOL, OUTBOARD FLAP | 1 | |
| TE65-737201-2 | TEST EQUIPMENT -RIGGING TOOL. OUTBOARD FLAP | 1 | |
| TEK-6803-1 | BOEING 767 PT4 51-00-04 I/B AFT FLAP, 2024T3 .032" inner surface, 1 ply middle, 2 plies outer, BMS 8-219 Style 285 & BMS 4-4 Type 3-10N Form A | 1 | |
| TEK-6803-2 | BOEING 767 PT4 51-00-04 O/B AFT FLAP, 19 Plies inner, 18 Plies middle, 36 Plies outer, BMS 8-79 TYPE 120 & BMS 8-124, CL IV, TY V, GR 3 | 1 | |
| TEK-6803-3 | BOEING 767 PT4 51-00-04 O/B AFT FLAP, 19 Plies inner, 18 Plies middle, 36 Plies outer, BMS 8-79 TYPE 1581 & BMS 8-124, CL IV, TY V, GR 3 | 1 | |
| TEK-6803-4 | BOEING 767 PT9 51-00-02 I/B FLAP COVE PANEL, 1 Ply inner, 1 Ply middle, 1 Ply outer, BMS 8-79 TYPE 1581, BMS 8-168 STYLE 3K-70-PW & BMS 8-124, CL IV, TY V, GR 3 | 1 | |
| TEK-6803-5 | BOEING 767 PT9 51-00-02 O/B FLAP TRAILING EDGE WEDGE, 1 Ply inner, 1 Ply middle, 1 Ply outer, BMS 8-79 TYPE 120 & BMS 8-124, CL IV, TY V, GR 3 | 1 | |
| TEKIT-5076-767 | 767 OUTBOARD FLAP JOINT 6 ULTRASONIC INSPECTION KIT, INCLUDES NDT6031-1THRU -4, TEK-5076-1 THRU -4, | 1 | |
| TEKIT-5077-767 | 767 OUTBOARD FLAP JOINT 6 ULTRASONIC INSPECTION KIT, INCLUDES NDT6032-1THRU -4, TEK-5077-1 THRU -4, | 1 | |
| TEKIT-8139/TC | ULTRASONIC KIT- OUTBOARD MIDFLAP CARRIAGE SPINDLES. B737 PART 4 57-50-02. INCLUDES NDT3038, NDT3038-P1, SUC 166-8T(AFC-525-8T) ABNC-MD6( BNC-MICRODOT CABLE), 8 OZ BOTTLE COUPLANT. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| TF50B27002 | GREASING ADAPTER FOR FLAP | 1 | |
| TF50B27002A1 | GREASING ADAPTER FOR FLAP | 2 | |
| TSJ65B83854 | TEST JIG - TRAILING EDGE FLAP TRANSMISSION AND TORQUE LIMITER | 1 | |
| U08A270000A | BREAK-OUT BOX FOR FLAP ASYMMETRY SYSTEM | 1 | |
| U09A270000A | TEST BOX FLAP | 1 | |
| WD-6000 | GEAR BOX-FLAP ACTUATOR SYSTEM | 1 | |
| f 80167-13 | LUBRICATION TOOL SET - TE FLAP CARRIEAGE ROLLER | 19 | |
| С27030-94 | TEST EQUIPMENT - FLAP SCREW BACKLASH | 1 | |
| 98A57904000000 | OUTER FLAP SLING,USE TO INSTALL/REMOVAL | 8 | |
| A0940000W2 | TOOL,USE FOR TIGHTEN KRUEGER FLAP ACTUAT | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
