| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| DWTST7/8-26P | TAP TOOL | 1 | |
| IAE1N20444 | TAP TOOL | 10 | |
| SRW14T | TAP TOOL | 1 | |
| SRW25T | TAP TOOL | 3 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 99A55209001000 | TAP TEST TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| 1-0625UNJ3B | IGNITOR PLUG TAP TOOL | 1 | |
| 1.1875 – 16 UNJ-3A | TAP AND DIE TOOL | 1 | |
| 1/2 UNC | TAP & DIE SET TOOL | 1 | |
| 1/2 UNF | TAP & DIE SET TOOL | 1 | |
| 1/4 UNF | TAP & DIE SET TOOL | 1 | |
| 10/24 UNC | TAP & DIE SET TOOL | 1 | |
| 10/32 UNF | TAP & DIE SET TOOL | 1 | |
| 109-3101-58-1 | AW139 Tool- Tapping Hammer | 1 | |
| 109-3101-58-2 | AW139 Tool-Tapping Hammer | 3 | |
| 12X28UNF | 12 X 28 UNF TAP TOOL | 1 | |
| 132-32-4305 | TOOL DRILLING & TAPPING | 1 | |
| 139W00−400−11 | CUTTING TOOL FOR LOOP TAPE | 1 | |
| 445 | SPARK PLUG TAP (18 MM) TOOL P/N 445 | 2 | |
| 3885 | SAE TAP AND DIE DRIVE TOOL SET | 1 | |
| 26318 | MATRIC TAP & DIE SUPPER SET TOOLS | 1 | |
| 50427 | MACHINISTS PRECISION / STARRETTSHOP TOOLST HANDLE TAP WRENCHESSTARRETT CATALOG NO 93A SERIES E DP NO 50427 | 1 | |
| 1017815 | TAP TEST TOOL | 1 | |
| 1402747102 | TOOL TO TAP THE THREAD INSERTS BORES | 1 | |
| 1402747202 | THREAD INSERT TAPPING TOOL | 1 | |
| 1411180104 | HELICOIL HAND INSERTING TOOL, MACHINE TAPS | 1 | |
| 18193-9 | TOOL (TAP) FOR THREADING HOLES NECESSARY FOR INSTALLATION OF HELICAL-COIL INSERTS | 1 | |
| 18MMX1.5 TAP | METRIC TAP TOOL | 1 | |
| 1AE1N20444 | TAPPING TOOL | 1 | |
| 1AE1N20444 REV A | TAPPING TOOL | 1 | |
| 2021-0324 | STAPLER PNEUMATIC TOOL | 1 | |
| 224-4678 | SET OF TAPS AND DIES - UNC (BRITOOL - NOT SNAP ON) UP TO 3/4" | 1 | |
| 2CYT5 | TAP WRENCH: GEN ROUND, HAND TOOL, 1/16 IN MIN. TAP SIZE, 1/4 IN MAX. TAP SIZE | 1 | |
| 2CYT7 | TAP WRENCH: GEN ROUND, HAND TOOL, 1/16 IN MIN. TAP SIZE, 1/4 IN MAX. TAP SIZE | 1 | |
| 2R18901 | TAP TEST TOOL | 1 | |
| 3/4 UNC | TAP & DIE SET TOOL | 1 | |
| 3/4 UNF | TAP & DIE SET TOOL | 1 | |
| 3/8 UNC | TAP & DIE SET TOOL | 1 | |
| 3/8 UNF | TAP & DIE SET TOOL | 1 | |
| 32001-R815505 | TAP POSITION TOOL | 1 | |
| 33692-6 | HELI-COIL FINISHING TAP, HELI-COIL INSTALLATION TOOL, HELI-COIL TANG BRAKE OFF TOOL | 1 | |
| 3402454-1 | TAPER LOK BOLT TOOL KIT | 1 | |
| 3580031-1-01 | TOOL KIT BOLT TAPER | 1 | |
| 3692-6 | HELI-COIL FINISHING TAP, HELI-COIL INSTALLATION TOOL, HELI-COIL TANG BRAKE OFF TOOL | 3 | |
| 3695-3 | TOOLS (TAPS) FOR THREADING HOLES NECESSARY FOR INSTALLATION OF TWINSERT®S IN THE PISTON HOUSING | 9 | |
| 3695-4 | THREAD INSERT TAPPING TOOL | 8 | |
| 38193-9 | HELI-COIL TAP TOOL | 1 | |
| 3887-06 | TOOL (TAP) FOR THREADING HOLES NECESSARY FOR INSTALLATION OF TWINSERTS | 2 | |
| 3893-3 | HELICOIL TAP TOOL | 1 | |
| 3893-4 | TOOL (TAP) FOR THREADING HOLES NECESSARY FOR INSTALLATION OF TWINSERTS | 2 | |
| 3FBB | TOOLS (TAPS) FOR THREADING HOLES NECESSARY FOR INSTALLATION OF HELI-COIL INSERTS IN THE PISTON HOUSING | 6 | |
| 4/40 UNC | TAP & DIE SET TOOL | 1 | |
| 4FBB | BOTTOMING TAP TOOL | 5 | |
| 5/16 UNC | TAP & DIE SET TOOL | 1 | |
| 5/16 UNF | TAP & DIE SET TOOL | 1 | |
| 5/8 UNC | UNC TAP & DIE SET TOOL | 1 | |
| 5/8 UNF | TAP & DIE SET TOOL | 1 | |
| 5136-00-902-7893 | HELICOIL TAP TOOL | 1 | |
| 5193-6 | HELI-COIL FINISHING TAP, HELI-COIL INSTALLATION TOOL, HELI-COIL TANG BRAKE OFF TOOL | 1 | |
| 543515-1 | KIT;STAPLE TOOL | 1 | |
| 56193-3-2 | OVERSIZE BOTTOMING TAP TOOL | 3 | |
| 56193-4-2 | OVERSIZE HELI-COIL BOTTOMING TAP TOOL | 2 | |
| 5CBA | HELICOIL HAND INSERTING TOOL, STRAGHT FLUTE TAP | 1 | |
| 5CPA | HELICOIL HAND INSERTING TOOL, HAND TAP | 1 | |
| 5WY56 | THREAD INSERT TAPPING TOOL | 2 | |
| 6 X 1.0 MM TAP | TAP & DIE SET TOOL | 1 | |
| 6/32 UNC | TAP & DIE SET TOOL | 1 | |
| 600-2048-001 | TAPE THREATING ASSIST TOOL | 1 | |
| 63038T205 | SEAL TAPER TOOL | 1 | |
| 64941 | TOOL TAPET | 5 | |
| 6CBA | HELICOIL HAND INSERTING TOOL, HAND TAP | 1 | |
| 6F6400G02132 | T/R TAPERED FLANGE INST TOOL 1 | 1 | |
| 7/16 UNC | TAP & DIE SET TOOL | 1 | |
| 7/16 UNF | TAP & DIE SET TOOL | 1 | |
| 7/8 UNF | 7/8 UNF TAPS SET TOOL | 1 | |
| 714222 | TAPERED TOOL FOR SHAFT | 1 | |
| 7552-6 | HELI-COIL FINISHING TAP, HELI-COIL INSTALLATION TOOL, HELI-COIL TANG BRAKE OFF TOOL 1 7552-6 1 5193-6 HELI-COIL FINISHING TAP, HELI-COIL INSTALLATION TOOL, HELI-COIL TANG BRAKE OFF TOOL 1 MS124698 HELI-COIL INSERT 1 1911-6CN0562 HELI-COIL | 5 | |
| 8/32 UNC | TAP & DIE SET TOOL | 1 | |
| 8/36 UNF | TAP & DIE SET TOOL | 1 | |
| 8547219 | TAPERED PIN REMOVAL /INSTALLATION TOOL | 4 | |
| 8842-1 | TAP TEST TOOL | 1 | |
| 9/16 UNC | TAP & DIE SET TOOL | 1 | |
| 9/16 UNF | TAP & DIE SET TOOL | 1 | |
| 91012-1 | TAPER PIN EXTRACTION TOOL | 1 | |
| 91012-2 | TAPER PIN EXTRACTION TOOL | 1 | |
| 98A27808006000 | TOOL: MEASURING TAPE 5100 | 3 | |
| 98A5710013000 | TAP TEST TOOL | 1 | |
| 98A57103013000 | TAP TEST-TOOL | 20 | |
| 98D57103001000 | TOOL TAPER LOCK TEST | 4 | |
| 98D57103013000 | TAP TEST TOOL | 1 | |
| 98S 510 0 5000 200 | TAP TEST TOOL | 4 | |
| 98S51005000 | TAP TEST TOOL | 1 | |
| 98S51005000-200 | Tap Test Tool, ATR72 PT3 51-30-00 PG 304..FG 302.. | 4 | |
| 98S51005000200 | Tap Test Tool | 4 | |
| 98S51005000200-REVA | TAP TEST TOOL | 1 | |
| 99A5520900100 | TAP TEST TOOL | 1 | |
| 99A55209001000 | TAP TEST TOOL | 15 | |
| 99A552090010000 | TAP TEST TOOL | 1 | |
| 99A55407291000 | TOOL (FUNCTION TEST BLOCK FOR TAP TEST INSPECTION WITH WOODPECKER) | 5 | |
| 99D57204183000 | TAP TEST TOOL | 2 | |
| A-A-2538 | ADJUSTING TOOL,VALVE TAPPET | 1 | |
| A0145-02 | TOOL - TAPE (MANUAL) TRAIN ALERT P | 1 | |
| A0145-03 | TOOL - ALERT TAPE PIN TP AERONAV | 1 | |
| A0145-04 | TOOL - TAPE (MANUAL) TRAIN ALERT P | 1 | |
| AB55001-MV9 | TAP TEST-TOOL | 1 | |
| AZL01686-R00 | TOOL TO CUT TAPE IN HALF / FERRAMENTA PARA CORTAR FITA AO MEIO | 1 | |
| B315790 | EASY-OUT FITTING TOOL 1/4"-28 TAPER THREAD | 3 | |
| BAT-CTH8 | Composite Tap Hammer - Hard-to-Find Tool - We have them IN STOCK! | 2 | |
| CG9000087-0001 | TOOL WAIV TAPRV ENERGIZER KIT | 1 | |
| CHA705-884 | TAPER PIN SWAGING TOOL | 1 | |
| CT492 | TOOL - MEASURING, SERVICE WEAR TAP - THREAD CHASING, SPARK IGNITER BOSS CHAMBER TAP - THREAD CHASING, DIFFUSER CASE/IGNITER BOSS THREAD CHASING DIE - 1.00-20UNS-3A THREAD CHASING DIE - 0.9375-16NS | 5 | |
| CT720060-503 | Tap Extension Tool | 1 | |
| CUTA1871104B | TAPERED PIN EXTRACTION TOOL THREAD 0.112-40 | 1 | |
| DOR-L12026UNF | SET OF TAPS AND DIES - UNF (BRITOOL - NOT SNAP ON) AS LARGE AS YOU GET | 1 | |
| DT0432 | TAPPING TOOL | 1 | |
| DWFP55130 | VERSATILE PNEUMATIC STAPLER WITH A TOOL-FREE DEPTH ADJUSTMENT FOR VARIOUS UPHOLSTERY TASKS. | 1 | |
| F1294622 | SOCKET TOOL - AUTOPILOT CAPSTAN BREAKOUT TAPE | 2 | |
| FGBD929501 | TOOL FOR LOCKING PRESSURE HOLDING VALVE TAPET | 1 | |
| GS23482-1 | TOOL (THREADING TAP GUIDE) | 2 | |
| GU28883-1 | ASSY TOOL-INSERT TAPER PIN | 1 | |
| GU28883/1 | TAPERED PIN TOOL | 1 | |
| HA-109-3101-58-2 | AW139 TOOL-TAPPING HAMMER | 1 | |
| HOISTPOINT-RB211 | INTAKE HOIST POINT TAP TOOL | 1 | |
| HT2528 | TOOL, TAPLOC INSERT DRIVE TOOL | 1 | |
| HU26848 | TOOL TAPER REAMER (SR NO. 1085300) | 1 | |
| HU26849 | TOOL TAPER REAMER (SR NO 1085306) | 1 | |
| HU26850 | TOOL TAPER REAMER (SR NO 1085304) | 1 | |
| HU26851 | TOOL TAPER REAMER (SR NO 1085305) | 1 | |
| HU26852 | TOOL TAPER REAMER (SR NO. 1085308) | 1 | |
| HU26853 | TOOL TAPER REAMER (SR NO 1085309) | 1 | |
| HU35790 | TOOL TAPER REAMER (SR 1072669) | 1 | |
| HU42018-2 | GAUGE TAPER TOOL | 5 | |
| HU42130-1 | GAUGE TAPER FAN TIP TOOL | 7 | |
| IAE1N2044 | TOOL TAPPING | 1 | |
| IAE1N20444 | TOOL-TAPPING | 10 | |
| IAE2R18901 | THOR TAP TEST TOOLING | 7 | |
| IAE2R19437 | V2500 TAP TEST TOOL | 11 | |
| IAE2R19921 | TAP TEST TOOL | 3 | |
| LP | TAPING TOOL (8MM DIA) | 1 | |
| MAEL-320-008 | WATER TAP MAINT TOOLS | 1 | |
| METRIC-TAP&DIESET | TAP & DIE SET 3MM-12MM TOOL | 1 | |
| MIL-HDBK-337 | TAP HAMMER - TEST TOOL | 1 | |
| MIT183A8100 | ELEVATOR TAP SUPPORT TOOL | 2 | |
| NO 9 B + S TAPER | TAPER REAMER TOOL | 1 | |
| PM82607 | UNIT DRILL AND TAP SUPPORT TOOL | 1 | |
| PWA24524 | TOOL - MEASURING, SERVICE WEAR TAP - THREAD CHASING, SPARK IGNITER BOSS CHAMBER TAP - THREAD CHASING, DIFFUSER CASE/IGNITER BOSS THREAD CHASING DIE - 1.00-20UNS-3A THREAD CHASING DIE - 0.9375-16NS | 10 | |
| PWA26657 | TOOL TAP CHASING | 8 | |
| PWA27641 | TOOL - MEASURING, SERVICE WEAR TAP - THREAD CHASING, SPARK IGNITER BOSS CHAMBER TAP - THREAD CHASING, DIFFUSER CASE/IGNITER BOSS THREAD CHASING DIE - 1.00-20UNS-3A THREAD CHASING DIE - 0.9375-16NS | 5 | |
| RB21171AG419-TOOL | TAP TESTING AND EXTRACTION TOOL | 1 | |
| RBT67828 | Main Rotor Hub Tapered Bearing Tool Set | 2 | |
| RBW109-3101- 58-1 | AW139 TOOL- TAPPING HAMMER | 3 | |
| RBW109-3101- 58-2 | AW139 TOOL-TAPPING HAMMER | 3 | |
| SBA300-57-6110 | 15/16 TAPER REAMER TOOL | 1 | |
| SCA-MIL-HDBK-337 | TAP TEST-TOOL | 1 | |
| SKU1147 | TAPE HANDLE TAPPING TOOL 5/32 TO 1/2 | 1 | |
| ST8842 | Tap Test Tool | 11 | |
| ST8842-1 | Tap Tool, Aluminum, Brass or Steel | 6 | |
| ST8842-A | Tap Tool, Aluminum | 1 | |
| ST8842-B | Tap Tool, Brass | 1 | |
| ST8842-S | Tap Tool, Stainless Steel | 1 | |
| ST921MA | TAPERED SLEEVE REMOVAL TOOL | 1 | |
| ST921MA-3-7-33-ALL-P | PIN: SHLDR,TOOL,REMOVAL,SLEEVE,TAPERED | 2 | |
| ST921MA-4-7-33-ALL-P | PLUNGER: TOOL,REMOVAL,SLEEVE,TAPERED | 2 | |
| ST921MA-4-8-22-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-4-28-ALL-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-5-31-ALL-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-6-33-ALL-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-8-22-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-9-22-ALL | Standard tool-tapered sleeve removal tool | 1 | |
| T-0092-5 | TAPER PIN REMOVAL TOOL | 1 | |
| TAP TEST 2 | Tap Tool, Brass | 1 | |
| TAP-TESTER | TAP TESTER TOOL | 1 | |
| TAP-WRENCH | TAP WRENCH TOOL | 1 | |
| TAPE-MEASURE | TAPE MEASURE TOOL | 1 | |
| TAPER PUNCH | TAPER PUNCH TOOL | 1 | |
| TAPER-BOLT-REMOVAL | LARGE TAPER BOLT REMOVAL TOOL | 1 | |
| TAPER-REAMER | TAPER REAMER TOOL | 1 | |
| TAPTEST2 | TAP TEST-TOOL | 1 | |
| TD9902B | TAP AND DIE SET TOOL | 1 | |
| TH-100-C | TAP TESTING TOOL | 2 | |
| TH100-B | TAP TEST TOOL | 1 | |
| TH100-C | TAP TEST TOOL | 2 | |
| TH100B | TAP TEST KIT TOOL | 1 | |
| TLA4150-05 | TAPER-LOK KNOCK OUT TOOL | 1 | |
| TLA4150-3 | TAPER-LOK KNOCK OUT TOOL | 1 | |
| TLA4150-4 | TAPER-LOK KNOCK OUT TOOL | 1 | |
| TLA4150-5 | TAPER BOLK KNOCK OUT TOOL | 1 | |
| TLA4150-6 | TAPER-LOK KNOCK OUT TOOL | 1 | |
| TLD2040AR3-12 | TAPER LOK REAMER TOOL | 1 | |
| TLD2040AR4-12 | TAPER LOK REAMER TOOL | 1 | |
| TPM100 | TAPE MEASURE TOOL | 1 | |
| TPMA25EM | TAPE MEASURE TOOL | 1 | |
| UDB-710275 | REMOVAL TOOLING TAPER-LOCKS (.250" - 6,35MM) | 1 | |
| UDB-710280 | REMOVAL TOOLING TAPER-LOCKS (.312" - 7,93MM) | 1 | |
| UT2000 | TAP TESTING TOOL | 2 | |
| V825CLD | 8MM HEAD CLEANER TAPE TOOL | 1 | |
| WATERTAPTOOL | WATER TAP TOOL | 1 | |
| WP-632AM | WOODPECKER AUTOMATE TAP TEST TOOL | 5 | |
| WP632AM | TAP TESTING TOOL(WOODPECKER) | 5 | |
| lAElN20444 | TAPPING TOOL | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
