| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| ATRTGTPR0BETAPSET | TAP SET | 1 | |
| AW-98S51005000200 | TAP SET | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 2631A5 | TAP AND DIE SET (CALIBRATION) | 1 | |
| 00918477000P | TAP DRILL SET | 1 | |
| 02-2342 | TAP SET, THREAD CUTTING; HAND 1/4UNC | 1 | |
| 02-2355 | TAP SET, THREAD CUTTING;3/8"UNF | 1 | |
| 1-8 TAP & DIE SET | 1"-8 TAP & DIE SET | 1 | |
| 1/2 UNC | TAP & DIE SET TOOL | 1 | |
| 1/2 UNF | TAP & DIE SET TOOL | 1 | |
| 1/4 UNF | TAP & DIE SET TOOL | 1 | |
| 10-32NF | TAP AND DIE SET | 1 | |
| 10/24 UNC | TAP & DIE SET TOOL | 1 | |
| 10/32 UNF | TAP & DIE SET TOOL | 1 | |
| 16915 | TAP WRENCH 3 PIECE SET SOLID JAW | 1 | |
| 1PZ38 | WESTWARD 1PZ38 TAP/DIE SET 110 PIECE HSS | 1 | |
| 1PZ43 | 45 PC. TAP & DIE SET | 1 | |
| 2113-6020 | 40 PIECE TAP & DIE SET | 1 | |
| 221-227-SJ1 | TAP AND DIE SETS | 1 | |
| 221-227-SJ1T | TAP AND DIE SETS | 1 | |
| 221.227SJ2 | FACOM 41-PIECE HSS TAP & DIE SET, M3 - M18 TAPS, M3 - M18 DIES | 1 | |
| 2531 | TAP SET 10-32 UNF | 1 | |
| 2623 | TAP SET 1/4-28 UNF | 1 | |
| 2629 | TAP SET 5/16-24 UNF | 1 | |
| 2636 | TAP SET 3/8-24 UNF | 1 | |
| 2640 | TAP SET 7/16-20 UNF | 2 | |
| 2645 | TAP SET 1/2-20 UNF | 1 | |
| 2654 | TAP SET 5/8- 18 UNF | 1 | |
| 3885 | SAE TAP AND DIE DRIVE TOOL SET | 1 | |
| 23636 | TAP AND DIE SET | 1 | |
| 24606 | TAP & DIE SET, 41PC | 2 | |
| 24614 | TAP & DIE SET, 24PC | 3 | |
| 2521A211 | HAND TAP SET 1/4-32 | 1 | |
| 2521A212 | HAND TAP SET 5/16-32 | 1 | |
| 2521A213 | HAND TAP SET 3/8-32 | 1 | |
| 2521A214 | HAND TAP SET 7/16-28 | 1 | |
| 2521A215 | HAND TAP SET 1/2-28 | 1 | |
| 2521A216 | HAND TAP SET 5/8-24 | 1 | |
| 2521A217 | HAND TAP SET 11/16-24 | 1 | |
| 2521A218 | HAND TAP SET 3/4-20 | 1 | |
| 2521A219 | HAND TAP SET 7/8-20 | 1 | |
| 2521A723 | HAND TAP SET 3/8-24 | 1 | |
| 2521A771 | HAND TAP SET 1/4-20 | 1 | |
| 2521A772 | HAND TAP SET 5/16-18 | 1 | |
| 2521A773 | HAND TAP SET 3/8-16 | 1 | |
| 2521A774 | HAND TAP SET 7/16-14 | 1 | |
| 2521A776 | HAND TAP SET 9/16-12 | 1 | |
| 2521A777 | HAND TAP SET 5/8-11 | 1 | |
| 2521A778 | HAND TAP SET 3/4-10 | 1 | |
| 2521A779 | HAND TAP SET 7/8-9 | 1 | |
| 2521A781 | HAND TAP SET 1-8 | 1 | |
| 2521A821 | HAND TAP SET 1/4-28 | 1 | |
| 2521A822 | HAND TAP SET 5/16-24 | 1 | |
| 2521A824 | HAND TAP SET 7/16-20 | 1 | |
| 2521A825 | HAND TAP SET 1/2-20 | 1 | |
| 2521A826 | HAND TAP SET 9/16-18 | 1 | |
| 2521A827 | HAND TAP SET 5/8-18 | 1 | |
| 2521A828 | HAND TAP SET 3/4-16 | 1 | |
| 2521A829 | HAND TAP SET 7/8-14 | 1 | |
| 2521A831 | HAND TAP SET 1-12 | 1 | |
| 2521A854 | HAND TAP SET 2-14 | 1 | |
| 252A821 | HAND TAP SET (HSS ¼"-28) | 1 | |
| 25325A14 | THREAD REPAIR TAP AND DIE SET | 1 | |
| 25914 | TAP - DIE SET | 3 | |
| 25955A6 | TAP&DIE SET 53 PIECES | 1 | |
| 26055A64 | HIGH SPEED STEEL TAPS AND DIE SET | 1 | |
| 26055A74 | HIGH SPEED STEEL TAPS AND DIE SET | 1 | |
| 2635A3 | TAP AND DIE SET | 1 | |
| 2636A954 | HAND TAP SET 3/4-16 | 1 | |
| 26376 | METRIC TAP AND DIE SET | 4 | |
| 26377 | TAP AND DIE SET 117 PIECE | 3 | |
| 1017815 | TAP TESTER SET (FAN BLADES) | 1 | |
| 3958113 | MACHINIST TAP & DIE SET (LARGE SET) | 1 | |
| 16500031 | TAP SET 9/16-18 UNF | 1 | |
| 16500035 | TAP SET 3/4-16 UNF | 1 | |
| 2668A34 | US PRO TAP DIE SETS | 1 | |
| 27045A21 | HAND TAP SET (HSS PLUG CHAMFER) | 1 | |
| 27045A22 | HAND TAP SET 1/4 - 1/2 | 1 | |
| 2726A68 | METRIC TAPS AND DIE SET | 1 | |
| 3/4 UNC | TAP & DIE SET TOOL | 1 | |
| 3/4 UNF | TAP & DIE SET TOOL | 1 | |
| 3/8 UNC | TAP & DIE SET TOOL | 1 | |
| 3/8 UNF | TAP & DIE SET TOOL | 1 | |
| 4/40 UNC | TAP & DIE SET TOOL | 1 | |
| 5/16 UNC | TAP & DIE SET TOOL | 1 | |
| 5/16 UNF | TAP & DIE SET TOOL | 1 | |
| 5/8 UNC | UNC TAP & DIE SET TOOL | 1 | |
| 5/8 UNF | TAP & DIE SET TOOL | 1 | |
| 6 X 1.0 MM TAP | TAP & DIE SET TOOL | 1 | |
| 6/32 UNC | TAP & DIE SET TOOL | 1 | |
| 61411 | 45 PIECE TITANIUM NITRIDE SAE TAP AND DIE SET | 1 | |
| 7/16 UNC | TAP & DIE SET TOOL | 1 | |
| 7/16 UNF | TAP & DIE SET TOOL | 1 | |
| 7/8 UNF | 7/8 UNF TAPS SET TOOL | 1 | |
| 8/32 UNC | TAP & DIE SET TOOL | 1 | |
| 8/36 UNF | TAP & DIE SET TOOL | 1 | |
| 80187 | TAP AND DRILL SET | 3 | |
| 856A1078 | TAPE SET - HEATING-ELECTRIC | 1 | |
| 9/16 UNC | TAP & DIE SET TOOL | 1 | |
| 9/16 UNF | TAP & DIE SET TOOL | 1 | |
| 90-LS1002 | Bowers Lead Gauge Setting Std, No Taper | 1 | |
| 90-TF10 | Bowers Tapered Setting Blocks 10° Half Angle | 1 | |
| 90-TF15 | Bowers Tapered Setting Blocks 15° Half Angle | 1 | |
| 90-TF20 | Bowers Tapered Setting Blocks 20° Half Angle | 1 | |
| 90-TF30 | Bowers Tapered Setting Blocks 30° Half Angle | 1 | |
| 90-TF45 | Bowers Tapered Setting Blocks 45° Half Angle | 1 | |
| 95988 | TAP & DIE SET | 1 | |
| 97312 | TAP & DIE SET 3-24MM 66PCS | 1 | |
| 98A57103013000 | TAP SET TOOL | 19 | |
| 99D55109001000 | GR/EP set of laminate step thickness (tap) standard | 7 | |
| AGE-04718-401 | ADAPTER SET-MEAS, TAP BACKLASH | 4 | |
| AK40 | 40 PIECE TAP & DIE SET | 1 | |
| AZT-310 | HORIZONTAL STABILIZER COVERS (tapered shape), WINTER USE (set of 2) | 1 | |
| AZT-315 | HORIZONTAL STABILIZER COVERS (tapered shape), ALL YEAR USE (set of 2) | 1 | |
| BGS 900 | INCH/METRIC TAP/DIE SET, | 1 | |
| C652-103GT | RIVET SET TAPERED 1/8 2.53" L | 1 | |
| C652-105GT | RIVET SET TAPERED 1/8 4.53" L | 1 | |
| C652-105SP | RIVET SET TAPERED 3/32 4.53" L | 1 | |
| C652-107GT | RIVET SET TAPERED 1/8 6.53" L | 1 | |
| C652-109GT | RIVET SET TAPERED 5/32 2.53" L | 1 | |
| C652-111GT | RIVET SET TAPERED 5/32 4.53" L | 1 | |
| C652-113GT | RIVET SET TAPERED 5/32 6.53" L | 1 | |
| CTD11 | TAP & DIE SET 52PC | 1 | |
| CUTA12500103B | STRIKER BOLT AND TAP SET | 1 | |
| CUTA1250103B | STRIKER BOLT AND TAP SET | 4 | |
| CUTA1870103B | STRIKER BOLT AND TAP SET | 4 | |
| DWT40PC-HEX | 4#-1/2 CS TAP & HEX DIE SET | 1 | |
| DWT40PC-HS-ROUND | TAP & DIE SET | 1 | |
| ECFDD108-17 | TAP SCREWS 2.5 12MM 1SET/8PC | 1 | |
| ECFDE402-14 | TAPPING SCREWS 3 12MM 1SET 14 | 1 | |
| ECFDE402-7 | TAPPING SCREWS 2.5 10MM SET | 1 | |
| ECFDE402-9 | TAPPING SCREWS 2.5 8MM 1SET 5 | 1 | |
| ECFLF034-11 | TAP SCREW 3 12MM 1SET-2PCS | 1 | |
| ECFLF034-4 | TAP SCREW 2.5 8MM 1SET-2PCS | 1 | |
| ECPNF038-1 | TAPPING SCREW 1 SET/2PCS | 1 | |
| ECSPH271-21 | TAPPING SRCWS 2.5 8MM 1SET/8PC | 1 | |
| ECSPH271-6 | TAPPING SCRWS 2.5 6MM-1SET/7PC | 1 | |
| ECSPH271-9 | TAPPING SCRWS 2.5 8MM 1SET/6PC | 1 | |
| ECUHD218-28 | TAP SCREW 3-10MM/1SET-6PCS | 1 | |
| ECUHD218-4 | TAPSCREW 2.5 8MM 1SET-3PCS | 1 | |
| EW5126377 | 117 PC. TAP AND DIE SUPER SET | 1 | |
| FF1A66 | FOAM INLAY MEASURING TAPE AND SCREWDRIVER SET | 1 | |
| GA 541 | Threading Tap and Dieset | 2 | |
| GA541 | SET, TAP & DIE 41 PCS | 2 | |
| GAM541 | METRIC TAP & DIE SET | 1 | |
| GGG-T-330 | DIE AND TAP SET THREAD | 1 | |
| HC-8 | CLEANING TAPE - HI-8 VIDEO CASSETTE | 1 | |
| IAE 2R18901 | TAP TEST SET | 7 | |
| IAE2R18901 | Test Set Kit-TAP | 7 | |
| IAE2R18901UT2000IAE2R1 | TAP TEST SET | 1 | |
| IAE2R18902 | TAP TEST SET | 4 | |
| IAE2R19921 | TAP TEST SET | 3 | |
| IRW24606 | 41 PC. TAP & DIE SET | 1 | |
| JETDLH139 | TAP AND DIE SET 39 PC LH | 1 | |
| JISB-4430 HSS-G -UNF1/4 X 28 | HAND TAP SET OF 3 PIECES JIS B-4430 HSS-G - UNF 1/4 X 28 | 1 | |
| JISB-4430 HSS-G-UNF 5/16 X 24 | HAND TAP SET OF 3 PIECES JIS B-4430 HSS-G - UNF 5/16 X 24 | 1 | |
| KEN-518-1550K | TAPER PUNCH SET (KENNEDY) | 1 | |
| KW 0100882 | Center and Taper Punch set | 1 | |
| KW0100882 | Center and Taper Punch set | 1 | |
| KW0200643 | TAP AND DIE SET | 1 | |
| LANTAP-10 | LANTAP-10 LAN INTERFACE SET (GSE433 - 10 IN COAXIAL CABLE, 6 IN USB CABLE, 6 IN CAT5 CABLE, BNC CONNECTOR AND TERMINATOR) | 10 | |
| METRIC-TAP&DIESET | TAP & DIE SET 3MM-12MM TOOL | 1 | |
| MS 236 | VERTICAL STABILIZER TAPER PIN EXTRACTOR SET | 1 | |
| MS 654 | WING TAPER PIN EXTRACTOR SET | 1 | |
| PLT5 | 5PC EXTRA LONG TAPER PUNCH SET | 3 | |
| PNPGT38 | TAP & DIE SET | 1 | |
| PNPGT89 | REVERSE TAPPING SET | 1 | |
| PPB20AK | 2PC BRNZ TAPD PNCH SET | 1 | |
| RBT67828 | Main Rotor Hub Tapered Bearing Tool Set | 2 | |
| RP-BG-900 | INCH/METRIC TAP/DIE SET, | 1 | |
| RTD15M | 15PC MET TAP/DIE SET | 1 | |
| RTD40X | TAP/DIE SET | 1 | |
| RTD48 | 48PC MSTR RTHR TAP/DIE SET | 1 | |
| S117PC | STARRETT® 5 Piece Steel Tapered Center Punch Set with Plastic Pouch - USA MADE! | 2 | |
| SHR-086-9993K | UNF, 28 PIECE, TAPE DIE SET | 1 | |
| SHR086-9993K | THREADING SET -28 TAP AND DIE SET | 1 | |
| SM280011S | #10 TO #0 PIN, STRAIGHT SHANK, TAPER PIN REAMER SET | 1 | |
| T-1920 | TAP/RETHREAD PIPE DIE SET 12PC | 1 | |
| T-97311 | TAP AND DIE SET 25PC METRIC | 1 | |
| T305M | TAP SET M3-.50 | 1 | |
| T4075M | TAP SET M4-.75 | 1 | |
| T509M | TAP SET M5-.9 | 1 | |
| TAMA141 | SAE/METRIC PLUG TAP SET (41 PC) | 1 | |
| TD 2425 | TAP AND DIE SET | 5 | |
| TD-2425 | TAP DIE SET | 5 | |
| TD2425 | SET, TAP & DIE 41 PCS | 5 | |
| TD2425A | TAP & DIE SET, 41PC SAE | 1 | |
| TD9902 | TAP AND DIE SET | 2 | |
| TD99024 | 25 PIECES TAP & DIE SET | 1 | |
| TD9902B | TAP AND DIE SET TOOL | 1 | |
| TD9902C | LARGE TAP DIE SET, 27PC SAE | 1 | |
| TDL3 | 3PC 1/2DR TAP SKT SET | 1 | |
| TDL5 | 5PC 1/2 DR TAP SKT SET | 1 | |
| TDL8 | 8PC TAP SKT SET | 1 | |
| TDLH139 | TAP DIE SET 39PC LH | 1 | |
| TDM117A | TAP DIE SET | 4 | |
| TDM117B | TAP DIE SET, 41PC METRIC | 1 | |
| TDM99117 | TAP DIE SET. | 1 | |
| TDM99117B | TAP DIE SET | 3 | |
| TDM99117C | LARGE TAP DIE SET, 29PC MET | 1 | |
| TDP6 | Set, Pipe Tap, U.S., 6 pcs. (1/8" to 1") | 1 | |
| TDRSET | 7PC TAP/DIE DR TOOL SET | 1 | |
| TDTDM117A | SET, TAP AND DIE, U. | 2 | |
| TDTDM117B | MASTER TAP DIE SET, 121PC COM | 1 | |
| TDTDM500A | SET, TAP AND DIE, U. | 3 | |
| TDTDM500B | MASTER TAP DIE SET, 80PC COM | 1 | |
| TR-220 | ATC TRANSPONDER TEST SET TIC TR-220 WITH TAP 200 OPTION | 15 | |
| TRC3 | 18PC Course US RTHR TAP SET | 1 | |
| TRF3 | 18PC FINE US RTHR TAP SET | 1 | |
| TZE-231 (12 MM (W) X 8 M) | LABELLING TAPE CASSETTE | 1 | |
| TZE-241 (18 MM (W) X 8 M (L)) | LABELLING TAPE CASSETTE | 1 | |
| TZE-251 (24 MM (W) X 8 M (L)) | LABELLING TAPE CASSETTE | 1 | |
| TZE-421 ( 9 MM (W) X 8 M (L)) | LABELLING TAPE CASSETTE | 1 | |
| UT2000 | TAP TEST SET | 1 | |
| UT2000IAE2R1 | TAP TEST SET | 1 | |
| VSG24606 | 41PC FRACTIONAL TAP DIE SET | 1 | |
| VSG26376 | TAP AND DIE SET | 1 | |
| WTE18001 | NO.1 TAP EXTRACTORS SET | 1 | |
| WTE18002 | NO.2 TAP EXTRACTORS SET | 1 | |
| WTE18011 | NO.11 TAP EXTRACTORS SET | 1 | |
| WTE18013 | NO.13 TAP EXTRACTORS SET | 1 | |
| WTE18015 | NO.15 TAP EXTRACTORS SET | 1 | |
| Y102 | TAP TEST SET | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
