| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| SL90-314-1-2500 | TAB TOOL | 7 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 551024T01 | TOOLKIT TOOL KIT, STABILIZER-ELEVATOR T (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S27105001000 | TRIM TAB SUPPORT LOCATION TOOL | 1 | |
| (CALIB) 98S27105001002 | TRIM TAB SUPPORT LOCATION TOOL | 1 | |
| (CALIB) 98S27105002000 | AILERON BLOCKING TOOL (SPRG TAB) | 1 | |
| (CALIB) C27007-31 | TOOL-STAB TRIM CUTOUT TESTER (CALIBRATION) | 1 | |
| (CALIB) CG9551001-0001 | H - STAB INSIDE FUSE HOLDING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HORIZONTAL STAB SLINGS | CALIBRATE AND RE-CERTIFY THIS TOOL (HORIZONTAL STAB SLINGS) IN ACCORDANCE WITH BOEING DWG C55007 REV. D (OR LATER) AND LOLER 1998 (OR LATER). TEST/CALIBRATION CERTIFICATE MUST REFERENCE MAINTENANCE DATA (MANUAL/STANDARD) AND REVISION USED. ADDITIONAL REFE | 1 | |
| -SL90-314-1-1250 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 5 | |
| 0009-0148GSE1-1 | TOOL, ACTUATOR RIG-GING - HORIZONTAL STABILIZER | 1 | |
| 0009-0148GSE2-1 | TOOL, RMV/INSTL, SEC-ONDARY PIN - HORIZON-TAL STABILIZER | 1 | |
| 02N65740 | STB-06-A PORTABLE TEST BENCH AND COSPAS-SARSAT ENCODING TOOL | 2 | |
| 0SCP4103-4 | PORTABLRE CUTTING TOOL | 1 | |
| 0U145409 | THS TAB WASHER REMOVAL / TORQUE TOOL | 18 | |
| 0U190844 | STAB BRAKE DISCONNECT TOOL | 29 | |
| 0U190857 | STAB JAMMING SIMULATION TOOL | 28 | |
| 1044 | DTI HORIZONTAL STAB BACKLASH TOOL | 2 | |
| 105-13141W5 | STAKING TOOL (ADJUSTABLE) | 1 | |
| 105-15103 W2 | TAB BENDING TOOL M/R | 1 | |
| 105-15103W2 | TAB BENDING TOOL | 1 | |
| 105-42121W6 | STAKING TOOL (ADJUSTABLE) | 1 | |
| 105-45361W3 | STAKING TOOL (ADJUSTABLE) | 1 | |
| 109-3101-24-1 | MAIN ROTOR TRIM TAB ADJUSTMENT TOOL | 1 | |
| 109-3101-69-301 | TOOL,HYDRAULIC CHARGING PORTABLE UNIT | 2 | |
| 109-3370-15-129 | TOOL ORIZ STABILIZERS INCIDENCE CHECK | 1 | |
| 109-3370-43-129 | TOOL ORIZ STABILIZERS INCIDENCE CHECK | 1 | |
| 11615-50 | PORTABLE DATA LOADER TOOLING | 5 | |
| 117-44115W1 | STAKING TOOL (ADJUSTABLE) | 1 | |
| 11G13S53371100-00007-R- | STABILISATION TOOL-WASHER | 1 | |
| 1204692 | HAMMER-DRILL,ELECTRIC,PORTABLE;KEYED JAW CHUCK;TWO SPEED;|CARRYING CASE 1;IMPACT SELECTOR;40MM MAX DIA DRILL CAPACITY;HAND AND POWER TOOLS; | 1 | |
| 12245-056-001 | TOOL, CONTOUR BOARD, BALANCE TAB | 2 | |
| 12345-053-001 | HORIZONTAL STABILIZER BUSHING REMOVAL TOOL | 1 | |
| 12845-469-017 | TOOL, BOX, TEST, WING STAB, ANTI ICE | 3 | |
| 139W00-500-01 | REMOVAL TOOL FOR TRAY TABLE | 6 | |
| 139W00−500−01 | REMOVAL TOOL − BACKREST TABLE ASSEMBLY | 6 | |
| 140166 | VERTICAL STABILIZER TOOL KIT | 1 | |
| 170-63080-801-11H1 | TOOL - SLING ADAPTER, LEADING EDGE, VERTICAL STABILIZER | 5 | |
| 170T07110-401 | H/STAB ALIGNMENT TOOL | 1 | |
| 17TES0043 | PORTABLE INTERFACE TOOL | 23 | |
| 18000-02 | DATA LOADER - PORTABLE, ARINC 615/A WITH MASS STORAGE DEVICE. TOOL MODEL NAME IS "EMAT" | 1 | |
| 184-4839 | PORTABLE PH METER TOOL | 1 | |
| 19-4301-0000 | TOOL - EQPT POTABLE WATER SERVICING | 9 | |
| 19-4303-0000 | TOOL - EQPT POTABLE WATER SERVICING | 4 | |
| 1MLANYARD | 1 METRE ADJUSTABLE LANYARD TOOL | 1 | |
| 206-215-001-101/002-101 | B206B/L Trim Tab Tool Set | 1 | |
| 2198-310 | TOOL - EQPT POTABLE WATER SERVICING | 1 | |
| 21C6046G01 | BENDING TOOL, TAB | 1 | |
| 2323000 | CONTOUR BOARD - HORIZONTAL STABILIZER TRAVEL CHECK TOOL | 1 | |
| 2370120-1 | TRIM TAB FREE PLAY TOOL | 4 | |
| 2370120-1 | AILERON/RUDDER TRIM TAB FREE PLAY TOOL | 4 | |
| 2370120-2 | AILERON/RUDDER TRIM TAB FREE PLAY TOOL | 1 | |
| 25-6Y1729A | TOOL AILERON GEARED TAB GAUGE | 1 | |
| 25-6Y1729AB | TOOL AILERON GEARED TAB GAUGE | 2 | |
| 25-8Y97-1A | RUDDER GEARED & TRIM TAB CHECKING TOOL | 5 | |
| 256A2004AT2 | Lock Washer Tab Set Tool | 1 | |
| 256A2261AT20 | Lock Washer Tab Set Tool | 1 | |
| 266650AT1 | CALIBRATION TOOL (WP 0014 00, TABLE 1, ITEM 47) | 1 | |
| 269T9322 | TAB BENDING TOOL | 1 | |
| 269T9332 | TAB BENDING TOOL,M/R BLADE | 1 | |
| 269T9332-1 | TAB BENDING TOOL,M/R BLADE | 1 | |
| 27-01-3679 | LOCK TOOL AIL SPRING TAB (MV7627-5-02) | 1 | |
| 27-1-3679 | LOCK TOOL AIL SPRING TAB | 2 | |
| 27.1-3679 | LOCKTOOL,AILERON SPRINGTAB F50 | 2 | |
| 28-0-1827C | FIXATION TOOL (STAB CONTROL UNIT REMOVAL) | 3 | |
| 296050020-1 | TOOL ACCOUNTABILITY / WARNING TAGS | 1 | |
| 296050020-4 | SKYKIT-4, 30 TOOL ACCOUNTABILITY KIT (CUSTOM) | 1 | |
| 296050020-6 | CIRCUIT BREAKER KIT (70 TOOL ACCOUNTABILITY | 1 | |
| 2C14232P01 | PORTABLE TEST SET FOR V S V TOOL | 1 | |
| 2C6600G03 | TOOL, TAB BENDER - H | 4 | |
| 2MIT1A264-0281-1 | ROTATION TOOL - POTABLE WATER TANK | 4 | |
| 2MIT2A264-0812-1 | POTABLE WATER TANK END CAP ROTATION TOOL | 5 | |
| 2MIT63B13349-1 | HORIZONTAL STAB JACKING TOOL | 5 | |
| 2MIT65B03670 | Horizontal stabilizer hinge bolt& bearing replacement tool kit | 6 | |
| 2MIT65B03670-1 | HORIZONTAL STABILIZER HINGE BOLT AND BEARING REPLACEMENT TOOL KIT | 3 | |
| 30100 | ARINC -615 PORTABLE DATA LOADER TOOL | 19 | |
| 30500501 | CHROME VANADIUM ADJUSTABLE HOOK WRENCH C SPANNER TOOL 19‐51MM | 1 | |
| 35-92178-0001 | LH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 35-92178-0002 | RH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 35-92179-0001 | RUDDER TRIM TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 350A94-1130-01 | MAIN ROTOR BLADE TRIM TAB TOOLS | 1 | |
| 369021100-80907 | MAIN ROTOR BLADE TAB BENDING TOOL | 1 | |
| 36989928 | MAIN ROTOR BLADE TAB BENDING TOOL | 1 | |
| 369D21100-809 | MAIN ROTOR BLADE TAB BENDING TOOL | 1 | |
| 369D21100-80907 | MAIN ROTOR BLADE TAB BENDING TOOL | 1 | |
| 369H9928-101 | TRIM TAB TOOL W/ DIAL INDICATOR | 1 | |
| 38-MB-093-2 | POTABLE WATER LINE PLUG TOOL | 1 | |
| 381873AT1 | Lock Washer Tab Set Tool | 1 | |
| 3867AS1815-1 | HORIZONTAL STABILATOR BEARINGTOOL SET | 1 | |
| 39-000 | Miniature Adjustable Crimp Tool M22520/34-01 for MIL-DTL-28840 Tooling | 2 | |
| 396H9923-11 | TAB BENDING TOOL | 1 | |
| 396H9928-1 | TAB ANGLE TOOL | 1 | |
| 3G6205G03532 | MAIN ROTOR BLADE TRIM TAB TOOL | 1 | |
| 3G6205G03532-OTA | TOOL KIT, M/R BLADE TRIM TAB BENDING - METALICO | 1 | |
| 3MIT65B80713 | MISCELLANEOUS TOOL AIR MOTOR - STABILIZER JACKSCREW ADAPTER | 3 | |
| 3PME140W9700 | STAB TRIM TOOL | 1 | |
| 3mit65b80713 | MISC.TOOL STABILIZER | 3 | |
| 403475-009 | ROTABLE DATA LOADER TOOL | 3 | |
| 415200GSE1 | HORIZONTAL STABILIZER RIGGING TOOL | 1 | |
| 415200GSE1-1001 | HORIZONTAL STABILIZER RIGGING TOOL | 3 | |
| 415AE03 | TOOL HLDR BAR W/WELDED TABS | 1 | |
| 416200G SE1-1001 | HORIZONTAL STABILIZER RIGGING TOOL | 5 | |
| 416200GSE1-1001 | TOOL, ACTUATOR RIG-GING - HORIZONTAL STABILIZER | 5 | |
| 416200GSE2-1001 | TOOL, RMV/INSTL, SEC-ONDARY PIN - HORIZON-TAL STABILIZER | 4 | |
| 429-215-002-101 | T/TAB BENDING TOOL | 1 | |
| 45-135030-9/ 810 | TAB DEFLECTION TOOL | 2 | |
| 45-135030-9/810 | TAB DEFLECTION CHECK TOOL-AILERON | 2 | |
| 5199 | ADJUSTABLE CRIMPING TOOL | 1 | |
| 45436 | PORTABLE CRIMP TOOLS | 8 | |
| 47386 | PIDG AWG 22-16 PORTABLE CRIMP TOOLS | 19 | |
| 47386 {LONG HANDDLE} | ADJUSTABLE CRIMP TOOL | 2 | |
| 47824 | PORTABLE CRIMP TOOL | 3 | |
| 4ME14W9700 | STAB TRIM TOOL | 1 | |
| 508668-201 | TOOL, INFLATABLE RESTRAINT | 4 | |
| 5190-314-5625 | TOOL-EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| 5385A12 | WRENCH: SPANNER, ADJUSTABLE 15/16 IN,6 IN LG, CR PLTD TOOLS - HAND / POWER: FORGED STL | 1 | |
| 5385A16 | WRENCH:SPANNER, ADJUSTABLE1-11/16IN, 15IN LG, CR PLTD TOOLS - HAND / POWER :FORGED STL | 1 | |
| 571-45436 | PORTABLE CRIMP TOOLS | 1 | |
| 59250 | PORTABLE CRIMP TOOL TE MULTI GAUGE | 18 | |
| 59275 | TE Connectivity 59275 T Portable PIDG SH 26-20 Crimp Tool | 13 | |
| 59284-1 | ADJUSTABLE CRIMPING TOOL | 1 | |
| 59824-1 | ADJUSTABLE CRIMP TOOL | 6 | |
| 59974-1 | PORTABLE CRIMP TOOL | 13 | |
| 600-00001 HFIX-14 | HORIZONTALSTAB TOOL | 1 | |
| 600-00001HFIX-14 | HORIZONTALSTAB TOOL | 1 | |
| 6115 | ADJUSTABLE CRIMPING TOOL | 1 | |
| 63813-3100 | Extraction Tool for 6.35mm Heavy Tab Terminals, 12-14 AWG | 1 | |
| 63817-0300 | Heavy Duty Cable Stripping Tool suitable for cable diameters up to 40.00mm | 1 | |
| 63817-0400 | Precision Stripper Tool suitable for cable diameters up to 11.00mm | 1 | |
| 63819-2700 | Hand Crimp Tool for 6.35mm Heavy Tab Terminals | 1 | |
| 63819-6900 | Hand Crimp Tool for Industry standard 1.78mm Tab Terminals, 24-26 AWG Wire | 1 | |
| 63819-7300 | Hand Crimp Tool for 6.35mm Tab Slip-On Receptacle Terminals | 1 | |
| 63823-8300 | Hand Crimp Tool for 6.35mm Tab Slip-on Male Crimp Terminals | 1 | |
| 63823-8370 | Modular Crimp Head for Hand Crimp Tool for 6.35mm Tab Slip-on Male Crimp Terminals | 1 | |
| 63823-8400 | Hand Crimp Tool: for 2.79mm Slip-In Tab Quick Disconnect Terminal | 1 | |
| 63827-0300 | Hand Crimp Tool for 1.78mm (.070") Tab Female Crimp Terminals | 1 | |
| 63827-0400 | Hand Crimp Tool for 1.78mm (.070") Tab Female Crimp Terminals | 1 | |
| 63827-0500 | Hand Crimp Tool for 1.78mm (.070") Tab Female Crimp Terminals | 1 | |
| 63827-2500 | Hand Crimp Tool For 1.85mm Tab Terminal | 1 | |
| 65610-FE283500 | HORZ.STAB.GREASING TOOL | 1 | |
| 65E01085 | TOOL BOX PORTABLE | 1 | |
| 65E01086 | TOOL BOX PORTABLE | 1 | |
| 65E01087 | TOOL BOX PORTABLE | 1 | |
| 69-00-04-026-00 | TAB REMOVAL TOOL | 1 | |
| 69-00-04-027-01 | TABS BONDING TOOL | 1 | |
| 69120-2 | 220-230 VAC 50/60 HZ PORTABLE HYDRAULIC CRIMP TOOL | 5 | |
| 699B02 | PORTABLE SHAKER (SPECIAL TOOL) | 1 | |
| 699B02 PCB | PORTABLE SHAKER (SPECIAL TOOL) | 1 | |
| 699B02PCB | PORTABLE SHAKER (SPECIAL TOOL) | 1 | |
| 6F6210A05431A563A | TRIM TAB POSITIONING TOOL | 1 | |
| 6MIT65B-03670 | HORIZ STAB HGE TOOL | 1 | |
| 6MIT65B03670 | Horizontal stabilizer hinge bearing-free play check tools | 1 | |
| 6P1005510051CKF | HSTAB RIGGING TOOL - OPTIONAL | 1 | |
| 7011 | BARREL, Stab. Jack Screw Pin Tool | 8 | |
| 703A.94.1130.01 | BENDING TOOL TABS | 2 | |
| 703A93-0021-00 | SHUR-LOK M16 TAB WASHER REPLACEMENT TOOL | 1 | |
| 703A94-1130-01 | Deg. Tab Tool / Gauge | 2 | |
| 703A94-1130-10 | TAB ADJUSTING TOOL | 1 | |
| 70700-20308-041 | TRIM TAB ADJUSTMENT TOOL | 1 | |
| 724713-1 | .250 TAB EXT. TOOL | 1 | |
| 738192156242 | BSBMIEQM 1/2 INCH TORQUE WRENCH ANGLE GAUGE TOOL,360° ADJUSTABLE | 1 | |
| 76060MK2-ADJ | ADJUSTABLE LANYARD TOOL | 1 | |
| 785084-1 | EXT TOOL SOC-LOC TAB 1.5 CONN | 1 | |
| 80000-03-01010203 | DATA LOADER - PORTABLE, ARINC 615/A WITH MASS STORAGE DEVICE. TOOL MODEL NAME IS "PMAT2000" | 1 | |
| 80000-04-01020301 | DATA LOADER - PORTABLE, ARINC 615/A WITH MASS STORAGE DEVICE. TOOL MODEL NAME IS "PMAT2000" | 1 | |
| 810-45-135030-9 | SERIES REFERENCE: 1077. NOMENCLATURE: TRIM TAB FREE PLAY CHECK FIXTURE. SPECIFICATIONADDITIONAL DATA: LOCAL MANUFACTURE PER APPROPRIATE MM ATA 27 AS ALTERNATE TOOL. CALIBRATED DIAL INDICATOR MUST BE WITH UNIT FOR USE. ATA: 270055 | 1 | |
| 81401A4541000 | TOOL: GAUGES-ADJUSTABLE 5100 | 1 | |
| 822-3292GSE1 | TOOL, ACTUATOR RIG-GING - HORIZONTAL STABILIZER | 1 | |
| 822-3292GSE1-1 | TOOL,ACTUATOR RIGGING-HORIZONTAL STABILIZER | 1 | |
| 822-3292GSE2 | TOOL, RMV/INSTL, SEC-ONDARY PIN - HORIZON-TAL STABILIZER | 1 | |
| 822-3292GSE2-1 | TOOL, REM/INSTL, SECONDARY PIN - HORIZONTAL STABILIZER | 1 | |
| 85517021-001-138 | TOOL, LEFT GEAR TAB | 4 | |
| 85517021-002-138 | TOOL, LEFT GEAR TAB | 4 | |
| 856A1048 | TABLE, ANTITORQUE - TOOLING IGB MODULE | 1 | |
| 856A1048 G02 | Table Anti‐torque ‐ Tooling IGB Module | 9 | |
| 856A1048G01 | TABLE, ANTITORQUE - TOOLING IGB MODULE | 1 | |
| 856A1048G02 | Table, Anti-torque - Tooling IGB Module (anti-torque table) | 9 | |
| 856A1058G02 | TABLE, ANTITORQUE - TOOLING IGB | 5 | |
| 856A2406G01 | Pressure Tool Inflatable Blds | 1 | |
| 856A3563 | TOOL R/I STALOCK TAB WASHER HO | 1 | |
| 856A3630 | PRESSURE TOOL INFLATABLE FAN BLADES INNER PATCH (220V) | 1 | |
| 856A6762 | PRESSURE TOOL INFLATABLE - FAN BLADES ADRADABLE LINER | 1 | |
| 856A6762G01 | PRESSURE TOOL INFLATABLE - FAN BLADES ABRADABLE LINER | 1 | |
| 856A6762G02 | PRESSURE TOOL INFLATABLE - FAN BLADES ABRADABLE LINER | 1 | |
| 856A6762G03 | PRESSURE TOOL INFLATABLE - FAN BLADES ABRADABLE LINER | 1 | |
| 857400002-S901-138 | TOOL TAB RIGGING | 1 | |
| 85740002-S901-138 | TOOL-TAB RIGGING | 1 | |
| 85740007-S901-138 | TOOL-AILERON TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 85740007-S903-138 | TOOL-L/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| 85740007-S904-138 | TOOL, TRIM TAB RIGGIN | 1 | |
| 85740009-S903-138 | TOOL, TRIM TAB RIGGING | 2 | |
| 85741000-003-138 | TOOL, LEFT GEAR TAB | 2 | |
| 85741000-004-138 | RIGHT GEAR TAB RIGGING TOOL Q400 | 2 | |
| 87407 | TOOL BOX,PORTABLE:BLUE,240 MM 0/A LG | 1 | |
| 895-3101-04-147 | MR TAB BENDING AND MEASURING TOOL | 1 | |
| 895-3101-04-201 | TOOL, M/R BLADE TRIM TAB BENDING | 1 | |
| 895-3101-24-1 | MR TAB BENDING AND MEASURING TOOL | 1 | |
| 895-3101-4-117 | MR TAB BENDING AND MEASURING TOOL | 1 | |
| 8G6210G00331 | M/R BLADE TRIM TAB BENDING TOOL | 1 | |
| 90090-2 | AMP TAB size range 26-18 AWG. This tool also performs the same function as 90090-3. | 2 | |
| 90296-1 | ADJUSTABLE CRIMP TOOL | 1 | |
| 90296-2 | ADJUSTABLE CRIMPING TOOL | 1 | |
| 9070 | WRIST-STRAP ADJUSTABLE CONDUCTIVE STATIC CONTRL TOOL | 5 | |
| 915-11515-1 | KIT TAB TOOL AIR FORCE H-60 | 1 | |
| 92250-00805-041-T046 | PORTABLE REMOVAL TOOL | 1 | |
| 92700-10313-045 | TRIM TAB ADJUST TOOL | 1 | |
| 95-92054-0003 | LH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 980.1107 | KS TOOLS 360° ADAPTOR, ADJUSTABLE | 1 | |
| 98A08001003000 | TOOL-VERTICAL STABILIZER MEASUREMENT | 1 | |
| 98A27407508000 | WERKZEUGSATZ FUER HLW-MONTAGE TOOL SET INSTALLATION AND REMOVAL HORIZONTAL STABILIZER BEARINGS | 1 | |
| 98A27407508001 | TOOL SET - R/I HORIZONTAL STABILIZER | 5 | |
| 98A27407514004 | FIXTURE STRUT HORZ STAB TOOL | 14 | |
| 98A27408322000 | TOOL SET - R/I, HORIZONTAL STABILIZER | 2 | |
| 98A28203000000 | STAB FUEL JET PUMP TOOL | 8 | |
| 98A55308449000 | TOOL - ACCESS, VERTICAL STABALIZER | 1 | |
| 98A57103013000 | TAB TOOL FORMATION | 19 | |
| 98D27407517000 | TOOL SET – REMOVE/INSTALL TAIL HORIZONTAL STABILIZER (THS) ACTUATOR | 21 | |
| 98D52307525000 | ADJUSTABLE TOOL CARGO DOORS | 24 | |
| 98F25308437000 | TOOL: ADJUSTABLE STR | 2 | |
| 98F32001006000 | INFLATABLE TOOL-SHOCK ABSORPTION PILLARS | 13 | |
| 98F55308311000 | TOOL SET - R/I VERTICAL STABILIZER | 2 | |
| 98F55308311001 | TOOL SET - R/I VERTICAL STABILIZER | 2 | |
| 98F55308311002 | TOOL SET - REMOVAL INSTALLATION, VERTICAL STABILIZER | 1 | |
| 98S2700800904 | Elevator Tab Zero Degree Check Tool | 1 | |
| 98S27105001000 | TRIM TAB SUPPORT LOCATION TOOL | 5 | |
| 98S27105001002 | TRIM TAB SUPPORT LOCATION TOOL | 5 | |
| 98S27105002000 | AILERON BLOCKING TOOL (SPRG TAB) | 4 | |
| 98S27305009-000 | DRILLING TOOL FOR SPRING TAB RETROFIT | 1 | |
| 98S55203001000 | HORIZONTAL STABILISER R/I TOOL | 7 | |
| 98S55203001000-REVA0 | HORIZONTAL STABILISER R/I TOOL | 1 | |
| 98S55303001000 | VERTICAL STABILIZER R/I TOOL | 5 | |
| 98S57605002000 | BALANCING TOOLING FINS WITH TAB SPRINGS | 3 | |
| 99B02 | 6PORTABLE SHAKER (SPECIAL TOOL) | 1 | |
| 99А55407291000 | TAB TEST TOOL | 1 | |
| 9C1544 | TOOL SET ADJUSTABLE | 1 | |
| 9C6016G01 | STABILIZE FIXTURE - FORWARD ENGINE MOUNT_B777-300ER TOOL INITIAL PROVISIONING_[9C6016G01] | 3 | |
| 9MIT65-72788 | RIGGING TOOL RUDDER & RUDDER TAB | 1 | |
| A26001-131 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
| A26001-134 | ADAPTER CABLE - CARGO FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR THE REQUIRED CABLE(S)) | 5 | |
| A26001-135 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 7 | |
| A26001-136 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
| A26001-137 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
| A26001-138 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
| A26001-139 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
| A26001-144 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
| A26001-145 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
| A26001-148 | ADAPTER CABLE - CARGO FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR THE REQUIRED CABLE(S)) | 5 | |
| A26001-175 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
| A26001-176 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
| A26001-192 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
| A26001-24 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
| A26001-4 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 1 | |
| A26001-5 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 2 | |
| A27062-1 | TOOL SET - STABILIZER TRIM DRIVE | 4 | |
| A300-27-00-00-0214 | TOOL-FLAP TAB CONNECTION | 1 | |
| A55001-22 | LOCK EQUIPMENT, HORIZONTAL STABILIZER (CONTROL TOOL) | 14 | |
| A55001-34 | STAB LOCK TOOL | 3 | |
| A55001-47 | STAB LOCK TOOL | 9 | |
| A55004-98 | TOOL HORIZONTAL STABILIZER FN | 9 | |
| A55005-1 | STAB PIVOT BEARING REMOVAL TOOL | 3 | |
| AB20001-N2N | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| AB20001-N2Q | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| AB20001-N2R | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| AB20001-N2S | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| AB20001-N2T | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| AB20001-N2V | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| AB20001-N2W | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| AB20001-N3A | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| AB20001-N3B | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| AB20001-N3C | TOOL - INSTALLATION, TAB WASHER STA-LOK NSA5454 | 1 | |
| AB20001-N3D | TOOL- INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| AB20001-N3E | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA 5454 | 1 | |
| AB20001-N3H | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| AB20001-N3I | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| AB20001-N3K | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| AB20001-N3M | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| AB20001-N3N | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| AB20001-N3P | TOOL - INSTALLATION, TAB-WASHERS STA-LOK NSA5454 | 1 | |
| ACYMAGTLBXKT | MAG PHONE/TABLE TOOLBOX KIT | 1 | |
| AD-2002-19-52 | PORTABLE WATER PRESSURE CHK TOOL | 1 | |
| ADJUST-SPANNER-SML | ADJUSTABLE SPANNER TOOL | 1 | |
| AF7380001 | TOOL - EQUIPMENT - POTABLE WATER SERVICING | 1 | |
| AF8 | Adjustable Upper Range 8 Indent Crimp Tool | 14 | |
| AF8-CC | Standard Adjustable Indent Crimp Tool with CYCLE COUNTER | 2 | |
| AFM-10 | Adjustable 12 Indent Crimp Tool | 2 | |
| AFM8 | M22520/2-01 Miniature Adjustable Indent Crimp Tool | 14 | |
| AFM8-CC | Miniature Adjustable Indent Crimp Tool with CYCLE COUNTER | 2 | |
| ASK4107-7 | PORTABLE SWAGING TOOL | 1 | |
| AST3005 | PORTABLE SWAGING TOOL | 1 | |
| AST3016 | PORTABLE BEARING SWAGING TOOL | 1 | |
| AT-494 | PORTABLE SWAGING TOOL | 2 | |
| AT-505 | PORTABLE TRI-ROLLER SWAGING TOOL | 1 | |
| AT-506 | PORTABLE CUTTING TOOL | 1 | |
| AT-607 | Portable Cutter Tool for Bearing BACB10FA07G Functionally equivelant to RKC7125 | 2 | |
| AT31849 | TOOL-SPRING COMPRESSION, MLG STABILIZER BRACE | 7 | |
| AT31849-IAS | TOOL − SPRING COMPRESSION, MLG STABILIZER BRACE | 1 | |
| AT494 | PORTABLE TRI-ROLLER SWAGING TOOL | 2 | |
| AT502 | PORTABLE BEARING CUTTING TOOL | 1 | |
| B27011-28 | HORIZ STAB JACKSCREW TOOL | 1 | |
| B27011-62 | STAB LOAD TOOL | 4 | |
| B27011-77 | STAB LOAD TOOL | 5 | |
| B27011-79 | Install / Rem Tool - Horizontal Stab Jac | 18 | |
| B27034-6 | STABILIZER LOAD TOOL | 6 | |
| B27039-28 | RIGGING CONTROLS STAB TRIM(KIT)TOOL | 9 | |
| B27039-29 | RIGGING CONTROLS STAB TRIM TOOL | 1 | |
| B27050 | TOOL SET -0 STABILIZER TRIM DRIVE | 1 | |
| B27050-28 | TOOL SET - STABILIZER TRIM DRIVE | 2 | |
| B29006-18 | YAW DAMPER/STAB TRIM MODULE TOOL | 1 | |
| B5003-3 | STAB PIN REMOVAL TOOL | 1 | |
| B55002-1 | STABLIZER TOOL | 1 | |
| B55002-15 | SUPPT EQUIP.HORIZ STAB TOOL | 11 | |
| B55002-25 | HORIZONTAL STAB HINGE DEARING TOOL SET | 1 | |
| B55003 | TOOL SET -0 HORIZ. STAB. HINGE BEARING | 1 | |
| B55003-1 | HOZ STAB HINGE BEARING TOOL | 1 | |
| B55003-21 | TOOL SET-HORIZ.STAB.HINGE BEARING | 1 | |
| B55003-25 | TOOL SET HOZ. STAB H | 1 | |
| B55003-27 | TOOL SET - HORIZONTAL STABILIZER HINGE BEARING | 7 | |
| B55003-3 | STAB PIN TOOL | 1 | |
| B71009-9 | TOOL SET - STAB. TRIM DRIVE | 15 | |
| B71042-154 | HANDLING FRAME RIM/INS STAB.SPHERICAL TOOL | 13 | |
| BACB10CH60 | PORTABLE TRI ROLLER TOOL | 1 | |
| BACB10CH60Z | PORTABLE TRI ROLLER TOOL | 1 | |
| BSBMIEQM | BSBMIEQM 1/2 INCH TORQUE WRENCH ANGLE GAUGE TOOL,360° ADJUSTABLE 1/2" DRIVE TORQUE METER WRENCH SET, | 1 | |
| C02040910-SFIX01-0001 | Tool Horizontal Stab Holding | 1 | |
| C27007-22 | STAB TRIM CUT OUT SWITCH TOOL | 1 | |
| C27007-31 | TOOL-STAB TRIM CUTOUT TESTER | 19 | |
| C27019-1 | TAB BEND TOOL | 3 | |
| C27026-24 | TEST FIXTURE, BRAKE ASSEMBLY, STABILIZER TRIM ACTUATOR TOOL | 9 | |
| C27032-1 | STAB / ELEVATOR MEASUREMENT TOOL | 11 | |
| C27050-32 | STABILIZER JACK REMOVAL TOOL | 8 | |
| C27050-82 | STABILIZER JACK REMOVAL TOOL | 16 | |
| C27065-20 | STAB JACK SCREW BACKLASH MEASUREMENT TOOL | 9 | |
| C27078 | Measurement Tool - Stabilizer System Test | 1 | |
| C27078-1 | Measurement Tool - Stabilizer System Test | 13 | |
| C27078-2 | STAB SYSYTEM TEST MEASUREMENT TOOL | 4 | |
| C27078-3 | MEASUREMENT TOOL - STAB. SYSTEM TEST | 1 | |
| C27083-18 | TOOL RIGGING BAR - ELEVATOR TAB | 9 | |
| C27086-1 | ELEVATOR TAB MECHANISM ASSEMBLY TOOL ASSY | 13 | |
| C55002-1 | HORZ STAB HINGE PIN REMOVAL TOOL | 18 | |
| C55008-1 | ALIGNMENT TOOL Horiz Stab | 7 | |
| CDSP2029-501 | GALLEY ADJUSTABLE FITTING TOOL | 1 | |
| CDSP2029-505 | GALLEY ADJUSTABLE FITTING TOOL | 1 | |
| CG9000026-0001 | TOOL HSTAB BACKLASH | 1 | |
| CG9551001-0001 | TOOL HSTAB HOLDING | 1 | |
| CHECK DIAL TOOL | CHECK DIAL TOOL STAB BEARING | 1 | |
| CHN410 | ADJUSTABLE PLIERS TOOL | 1 | |
| CHN480 | ADJUSTABLE PLIERS TOOL | 2 | |
| CJDMX27-004 | HORIZONTAL STABILIZER CENTERING TOOL | 1 | |
| CJMD827-002 | TOOL - TRIM TAB FREEPLAY | 2 | |
| CJMDS55-001 | HORIZONTAL STABILIZER CENTERING TOOL | 1 | |
| CJMDX27-004 | CENTERING TOOL -- HORIZ STAB | 2 | |
| CPW-100 | TOOL - EQPT POTABLE WATER SERVICING | 1 | |
| CPW-100-1 | TOOL - EQPT POTABLE WATER SERVICING | 1 | |
| CPW-100-2 | TOOL - EQPT POTABLE WATER SERVICING | 1 | |
| CS-235-RC106 | LH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| CTA-1160 | HAND TOOLS DATABUS | 17 | |
| D78T15348-1 | ROTATION TOOL - POTABLE WATER TANK END CAP | 1 | |
| DMAK-C295CN235 | RH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| DMC-M310 | ADJUSTABLE HAND CRIMP TOOL | 1 | |
| DMC1000-11R | .040" Adjustable Tension Safe-T-Cable® Application Tool Kit | 5 | |
| DMC1000-19R | .032" & .040" Adjustable Tension Safe-T-Cable® Application Tool Kit | 2 | |
| DMC1000-20R | .022" & .032" Adjustable Tension Safe-T-Cable® Application Tool Kit | 7 | |
| DMC1000-4R | .032" Adjustable Tension Safe-T-Cable® Application Tool Kit | 7 | |
| DMC1000-4RINC | .032" Adjustable Tension Safe-T-Cable® Application Tool Kit with Inconel Cable | 2 | |
| DMC1000-625 | .062" Hydraulic Adjustable Tension Safe-T-Cable® Application Tool Kit | 2 | |
| DMC1000-6R | .032" Adjustable Tension Safe-T-Cable® Application Tool Kit | 2 | |
| DMC1001-7R | .022" Adjustable Tension Safe-T-Cable® Application Tool Kit | 2 | |
| DMC1001-7RINC | .022" Adjustable Tension Safe-T-Cable® Application Tool Kit with Inconel Cable | 2 | |
| DMC1001-7RR | .022" Adjustable Tension Safe-T-Cable® Application Tool Kit with SCT-TB1R | 2 | |
| DMC1007-28R | .022", .032" and .040" Adjustable Tension Safe-T-Cable® Application Tool Kit | 5 | |
| DZZ7079-1 | TOOL-HORIZ STAB | 1 | |
| DZZ7124-1 | Set-horiz stab acme screw overhaul tool | 1 | |
| DZZ7376-1 | HORIZ. STAB.TOOL | 1 | |
| EN131M17 | PORTABLE STEP LADDER TOOL | 1 | |
| EUS309 | CRIMP TOOL, 8 STEP ADJUSTABLE | 1 | |
| EUS310 | CRIMP TOOL, 8 STEP ADJUSTABLE | 1 | |
| F26630200 | ADJUSTABLE TOOL | 8 | |
| F2MA955307 | HORIZONTAL STABILIZER HOLDING TOOL | 1 | |
| F50B955307 | HORIZONTAL STABILIZER HOLDING TOOL | 1 | |
| F50B955604 | TOOL SET FOR STABILIZER HINGE FITTINGS NDT | 1 | |
| F70261 | RIGGING TOOL -0 STABILIZER TRIM CONTROL USED TO | 1 | |
| F70261-1 | Rigging tool-stabilizer trim control | 2 | |
| F70272 | PIN REMOVAL TOOL -0 HORIZ STAB REAR SPAR USED TO | 1 | |
| F70272-1 | HORIZONTAL STAB PIN REMOVAL TOOL | 2 | |
| F70272-24 | Pin removal tool-horizontal stabilizer rear spar | 1 | |
| F70330-21 | ADJUSTABLE TOOL STAND | 5 | |
| F71336-501 | TOOL, LOCK-STABILIZER TRIM | 29 | |
| F72703 | STABILIZER LOCK OUT TOOL | 1 | |
| F72703-1 | STABILIZER LOCK OUT TOOL | 1 | |
| F72703-500 | STAB. SCREW JACK TOOL KIT | 4 | |
| F72706 | HORIZONTAL STABILIZER LIFTING TOOL - B727 | 5 | |
| F72969 | RIGGING TOOL-RUDDER & RUDDER TAB. USED TO | 1 | |
| F72969-1 | RIGGING TOOL RUDDER & RUDDER TAB | 6 | |
| F7XC202759510 | HORIZONTAL STABILIZER DEFLECTION MEASURING TOOL | 1 | |
| F7XC205559004 | HORIZONTAL STABILIZER HOLDING TOOL | 1 | |
| F7XC551900140A2 | HORIZONTAL STABILIZER SUPPORTING TOOL | 1 | |
| F80-0-1874 | LE Slat Actuator Lock Washer Tab Bending Tool | 1 | |
| F80-0-1875 | LE Slat Actuator Lock Washer Tab Bending Tool | 1 | |
| F80027-18 | ASSY - LOCK, HORIZONTAL STAB TOOL | 18 | |
| F80047 | REM TOOL ASSY- HORIZ STAB HINGE PIN | 1 | |
| F80047-1 | HORIZONTAL STAB PIN REMOVAL TOOL | 10 | |
| F80055-1 | TRAMMEL BAR STAB TRIM TOOL | 28 | |
| F80055-36 | STABILIZER WORM MEASURING TOOL | 9 | |
| F80177-14 | PIN REMOVAL TOOL - HORIZONTAL STABILIZER | 5 | |
| F80179-1 | LIGHT ADJUSTABLE TOOL | 6 | |
| F80231-1 | HORIZONTAL STAB AND FIN BUSHING REPLACEMENT TOOL K | 1 | |
| F80231-2 | HORIZONTAL STAB AND FIN BUSHING REPLACEMENT TOOL K | 1 | |
| F80231-3 | HORIZONTAL STAB AND FIN BUSHING REPLACEMENT TOOL K | 1 | |
| F80231-501 | HORIZ. STAB. AND FIN BUSHING REPLACE TOOL | 1 | |
| F80231-601 | HORIZ. STAB. AND FIN BUSHING REPLACE TOOL KIT | 1 | |
| F80231-629 | KIT TOOL - HORIZONTAL STABILIZER AND FIN, BUSHING REPLACEMENT | 1 | |
| F80231-629 -630 -631 | Kit Tool -Horizontal Stabilizer And Fin. Bushing Replacement | 1 | |
| F80231-630 | KIT TOOL - HORIZONTAL STABILIZER AND FIN, BUSHING REPLACEMENT | 1 | |
| F80231-631 | KIT TOOL - HORIZONTAL STABILIZER AND FIN, BUSHING REPLACEMENT | 1 | |
| F80255-11 | H-STAB PIN AND GUIDE TOOL KIT | 13 | |
| FGFB955501 | HORIZONTAL STAB MEASURING SET TOOL | 1 | |
| FIX000381 | TAB BENDING TOOL | 1 | |
| FIX000382 | TAB BENDING TOOL | 1 | |
| FLEXTOOLHLDR | ADJUSTABLE MAGNETIC TOOL HOLDE | 1 | |
| FLT15165SET | PORTABLE TOOL SET - SNAP ON | 1 | |
| FV292906000 | Translating Nut Positioning Tool− Horizontal Stabilizer Actuator | 2 | |
| G27036-143 | TOOL - CHECK, HORIZONTAL STABILIZER HINGE BEARING FREE PLAY | 2 | |
| G27036-186 | TOOL CHECK, HORIZONTAL STABLIZER HINGE BOLT BEARING FREE PLAY | 6 | |
| G27036-74 | TOOL - CHECK, HORIZONTAL STABILIZER HINGE BEARING FREE PLAY | 4 | |
| G28010-1 | SUMP DRAIN TOOL HORIZONTAL STAB 747-400 | 8 | |
| G601R274202-1 | Safety Tool - Horizontal Stabilizer (Optional) | 8 | |
| G601R274202-1 | TOOL ASSY, HORIZONTAL STABILIZE | 8 | |
| G601R274202???1 | SAFETY TOOL ??? HORIZONTAL STABILIZER | 8 | |
| G601R274202−1 | Safety Tool − Horizontal Stabilizer | 8 | |
| G601R274205-1 | ANTI TWIST TOOL - HORIZONTAL STABILIZER TRIM ACTUA | 4 | |
| G601R274205???1 | ANTI???TWIST TOOL HORIZONTAL??? STABILIZER TRIM??? | 4 | |
| G601R274205−1 | Anti−Twist Tool Horizontal− Stabilizer Trim−Actuator Bellows | 4 | |
| G601R711201-1 | ADJUSTABLE TOOL-COWL LATCH | 3 | |
| G604-274201-1 | SAFETY TOOL HORIZONTAL STAB | 4 | |
| G604-274201-1 | HORIZONTAL STAB SAFETY TOOL | 4 | |
| G604-274202-1 | TOOL HOR. STAB TRIM ACTUATOR BELLOWS ANTI TWIST | 4 | |
| G604−274201−1 | Safety Tool − Horizontal Stabilizer | 4 | |
| G670-2742-05 | HORIZONTAL STABALIZER TOOLING | 2 | |
| G6702742-05 | HORIZONTAL STABALIZER TOOLING | 2 | |
| G6702743−01 | Tightening Tool − Horizontal Stabilizer Trim Actuator | 4 | |
| GAJ15A | ADJUSTABLE SPANNER TOOL | 2 | |
| GD249-0001-1RFIX01 | TOOL, HOLD DOWN BAR, STAB | 3 | |
| GRANITE-TABLE | GRANITE-TABLE TOOL | 1 | |
| GSB2712003 | TOOL-AILERON TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2712004 | TOOL-TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 3 | |
| GSB2712005 | TOOL-TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2712005| | TOOL-TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2712006 | TOOL-L/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2712007 | TOOL-R/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB271500 | TOOL-RIGHT GEAR TAB LIFTING | 1 | |
| GSB2715001 | TOOL-LEFT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 3 | |
| GSB2715001-IAS | AILERON GEAR TAB RIG TOOL L/H Q400 | 1 | |
| GSB2715002 | TOOL-RIGHT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| GSB2715003 | L/H ELEVATOR TAB RIGGING TOOL | 2 | |
| GSB2715004 | R/H ELEVATOR TAB RIGGING TOOL | 1 | |
| GSB5500001 | HORIZONTAL STABILIZER LIFTING TOOL FOR Q300 | 1 | |
| GSB5500001-001 | HORIZONTAL STABILIZER LIFTING TOOL | 2 | |
| GSB5500001-001-213 | HORIZONTAL STABILIZER LIFTING TOOL | 1 | |
| GSE088 | HORIZONTAL STABILIZER RIGGING TOOL | 1 | |
| GSE159 | TOOL - SLING ADAPTER, LEADING EDGE, VERTICAL STABILIZER | 1 | |
| GTS-E | PANDUIT GTS-E ERGONOMIC HAND CABLE TIE TOOL, ERGONOMIC, ADJUSTABLE TENSION,7.8X5.7X0.9" | 5 | |
| H-STAB-SPPT-STR-TOOL | HOZ STAB SUPPORT STRUT TOOL | 1 | |
| H60/S-70 (2414F) | TRIM TAB TOOLS | 1 | |
| HA-206-PST-470 | B206B Portable Staking Tool w/Cutter for S/P | 1 | |
| HC131H0077-000 | FLAP TAB NEUTRAL SETTNG TOOL | 4 | |
| HORSTAB | HORIZANTAL STAB SETTING GAUGE TOOL | 1 | |
| HSA7600-01 | STUD AND TAB LEVER PULLNG TOOL | 1 | |
| ICPT-1303001 | PORTABLE CUTTING TOOL CUTTER HEAD | 1 | |
| IFR 4000 | PORTABLE NAV/COMM TEST SET MEASURIN TOOL | 33 | |
| IPCT-BACB10FB04G | PORTABLE CUTTING TOOL | 2 | |
| IPCT-NSA | PORTABLE CUTTING TOOL | 1 | |
| IPCT-NSA 8133-7 | PORTABLE CUTTING TOOL | 1 | |
| IPCT-NSA8133-06 | PORTABLE CUTTING TOOL | 1 | |
| IPCT-NSA8133-07 | PORTABLE CUTTING TOOL | 1 | |
| IPCT-NSA8133-6 | PORTABLE CUTTING TOOL | 1 | |
| IPCT-NSA8133-7 | PORTABLE CUTTING TOOL | 1 | |
| IPCT-P21160P20 | Portable Cutting Tool for Bearing P21160P20 and P21160P30 | 1 | |
| IPCT4101-10 | PORTABLE CUTTER TOOL | 1 | |
| IPCT4101-12 | PORTABLE CUTTER TOOL | 2 | |
| IPCT4101-4 | PORTABLE CUTTER TOOL | 2 | |
| IPCT4101-5 | PORTABLE CUTTER TOOL | 1 | |
| IPCT4101-6 | PORTABLE CUTTER TOOL | 2 | |
| IPCT4101-7 | Portable Cutting Tool for Bearing MS14101-7 REF: 14658282 | 2 | |
| IPCT4101-9 | PORTABLE CUTTER TOOL | 1 | |
| IPCT4103-12 | PORTABLE CUTTER TOOL FOR MS14103-12 BEARING | 1 | |
| IPCT4103-5 | CUTTING TOOL (PORTABLE) | 2 | |
| IPCT4103-7 | PORTABLE CUTTING TOOL- IPCT | 2 | |
| IPCT4103-8 | PORTABLE CUTTER TOOL | 1 | |
| IPCT4104-10 | PORTABLE CUTTING TOOL FOR BEARING MS 14102-10 | 1 | |
| IPCT4104-14 | PORTABLE CUTTING TOOL FOR BEARING MS 14102-14 | 1 | |
| IPCT4104-6 | PORTABLE CUTTING TOOL FOR BEARING MS 14102-6 | 1 | |
| IPCT4104-7 | PORTABLE CUTTING TOOL FOR BEARING MS 14104-7 | 1 | |
| IPCT7157 | Portable Cutting Tool Equivalent to RKC7157 | 2 | |
| IPCTI-P21160 | SPECIAL PORTABLE CUTTING TOOL FOR BEARING P21160 WITH UPGRADED STEEL, STRONGER SPRING AND PVD COATING | 1 | |
| IPCTI-P21160P20 | SPECIAL PORTABLE CUTTING TOOL FOR BERAING P21160P20 AND P21160P30 WITH UPGRADE STEEL,STRONGER SPRING AND PVD COATING | 1 | |
| IPCTI-P21760 | SPECIAL PORTABLE CUTTING TOOL FOR BEARING P21760 WITH UPGRADED STEEL, STRONGER SPRING AND PVD COATING | 1 | |
| IPCTI-P22970 | SPECIAL PORTABLE CUTTING TOOL FOR BEARING P22970 | 1 | |
| IPCTI-P24490 | SPECIAL PORTABLE CUTTING TOOL FOR BEARING P24490 WITH UPGRADED STEEL, STRONGER SPRING AND PVD COATING | 1 | |
| IPCTI-P2A2360 | PORTABLE CUTTING TOOL SUITABLE FOR BEARING P2A2360 AND P2A2360/P10 WITH UPGRADED STEEL, STRONGER SPRING AND PVD COATING | 1 | |
| IPCTI-S302T001-419 | REINFORCED SPECIAL PORTABLE CUTTING TOOL S302T001-419 | 1 | |
| IPCTS302T001-804 | PORTABLE CUTTER TOOL | 1 | |
| IPCTS302T001-805 | PORTABLE CUTTER TOOL | 1 | |
| IPIR-BACB10FB04G | PORTABLEPORTABLE INSTALL REMOVAL TOOL | 1 | |
| IPIR-P21160 | PORTABLE INSTALL/REMOVE TOOL SUITABLE FOR BEARING P21160, P21160P05, AND P21160P10 | 1 | |
| IPIR-P21760 | PORTABLE INSTALL/REMOVE TOOL SUITABLE FOR BEARING P21760 | 1 | |
| IPIR-P22970 | PORTABLE INSTALL/REMOVE TOOL FOR BEARING P22970 | 1 | |
| IPIR-P24490 | PORTABLE INSTALL/REMOVE TOOL TO SUIT P24490 BEARING | 1 | |
| IPIR-P2A2360 | PORTABLE INSTALL/REMOVE TOOL SUITABLE FOR BEARING P2A2360 AND P2A2360P10 | 1 | |
| IPIR-S302T001-419 | PORTABLE INSTALL AND REMOVE TOOL S302T001-419 | 1 | |
| IPIR4103-12 | PORTABLE INSTALL AND REMOVE TOOL FOR BEARING MS14103-12 | 1 | |
| IPIRS302T001-804 | PORTABLE INSTALL/REMOVE TOOL | 1 | |
| IPIRS302T001-805 | PORTABLE INSTALL/REMOVE TOOL | 2 | |
| IPIRT4104-10 | PORTABLE INSTALLATION/REMOVAL TOOL FOR BEARING MS 14102-10 | 1 | |
| IPIRT4104-14 | PORTABLE INSTALLATION/REMOVAL TOOL FOR BEARING MS 14102-14 | 1 | |
| IPIRT4104-6 | PORTABLE INSTALLATION/REMOVAL TOOL FOR BEARING MS 14102-6 | 1 | |
| IPIRT4104-7 | PORTABLE INSTALLATION/REMOVAL TOOL FOR BEARING MS 14104-7 | 1 | |
| IPLRS302T00 I-804 | PORTABLE INSTALL/REMOVE TOOL | 1 | |
| IPPLKS302T001-804 | PORTABLE PROOF LOAD TOOL | 1 | |
| IPPLKS302T001-805 | PORTABLE PROOF LOAD TOOL | 1 | |
| IPPLP-P22970 | PORTABLE PROOF LOAD TOOL FOR BEARING P22970 | 1 | |
| IPPLP-S302T001-804 | PORTABLE PROOF LOAD TOOL | 1 | |
| IPPLP-S302T001-805 | PORTABLE PROOF LOAD TOOL | 1 | |
| IPST-BACB10ES06AG | PORTABLE TRI-ROLLER SWAGING TOOL | 1 | |
| IPST-NSA | PORTABLE TRI-ROLLER SWAGGING TOOL | 1 | |
| IPST-NSA 8133-7 | PORTABLE TRI-ROLLER SWAGGING TOOL | 1 | |
| IPST-NSA8133-06 | PORTABLE TRI-ROLLER SWAGING TOOL | 1 | |
| IPST-NSA8133-07 | PORTABLE TRI-ROLLER SWAGING TOOL | 1 | |
| IPST-NSA8133-6 | PORTABLE TRI-ROLLER SWAGING TOOL | 1 | |
| IPST-NSA8133-7 | PORTABLE TRI-ROLLER SWAGING TOOL | 1 | |
| IPST-P21160 | PORTABLE TRI-ROLLER SWAGING TOOL SUITABLE FOR BEARING P21160, P21160P05, AND P21160P10 | 1 | |
| IPST-P21760 | PORTABLE TRI-ROLLER SWAGING TOOL FOR BEARING P21760 | 1 | |
| IPST-P21760DELETE | PORTABLE TRI-ROLLER SWAGING TOOL FOR BEARING P21760 | 1 | |
| IPST-P22970 | PORTABLE TRI-ROLLER SWAGING TOOL FOR BEARING P22970 | 1 | |
| IPST-P22970DELETE | PORTABLE TRI-ROLLER SWAGING TOOL BEARING | 1 | |
| IPST-P24490 | PORTABLE TRI-ROLLER SWAGING TOOL TO SUIT P24490 BEARING | 1 | |
| IPST-P2A2360 | PORTABLE TRI-ROLLER SWAGING TOOL SUITABLE FOR BEARING P2A2360 AND P2A2360P10 | 1 | |
| IPST-S302T001-419 | PORTABLE TRI-ROLLER SWAGING TOOL FOR BEARING S302T001-419 | 1 | |
| IPST2684 | PORTABLE TRI ROLLER SWAGING TOOL | 2 | |
| IPST2756 | PORTABLE TRI-ROLLER SWAGING TOOL | 1 | |
| IPST4101-10 | PORTABLE SWAGING TOOL | 1 | |
| IPST4101-12 | PORTABLE SWAGING TOOL | 1 | |
| IPST4101-14 | PORTABLE SWAGING TOOL | 1 | |
| IPST4101-3 | Portable Tri-Roller Swaging Tool for Bearing MS14101-3 ** Functional Equivalent For RST3000 ** | 1 | |
| IPST4101-4 | Portable Tri-Roller Swaging Tool for Bearing MS14101-4 | 2 | |
| IPST4101-5 | PORTABLE TRI-ROLLER SWAGING TOOL | 2 | |
| IPST4101-6 | PORTABLE TRI-ROLLER SWAGING TOOL | 2 | |
| IPST4101-7 | PORTABLE SWAGING TOOL | 2 | |
| IPST4101-9 | PORTABLE SWAGING TOOL | 1 | |
| IPST4103-10 | PORTABLE TRI-ROLLER SWAGING TOOL FOR BEARING MS14103-10 | 1 | |
| IPST4103-12 | PORTABLE TRI-ROLLER SWAGING TOOL | 2 | |
| IPST4103-3 | PORTABLE TRI-ROLLER SWAGING TOOL | 1 | |
| IPST4103-4 | Portable Tri-Roller Swaging Tool for Bearing MS14103-4 | 1 | |
| IPST4103-5 | Portable Tri-Roller Swaging Tool for Bearing MS14103-5 | 1 | |
| IPST4103-7 | Portable Tri-Roller Swaging Tool for Bearing MS14103-7 | 1 | |
| IPST4103-8 | PORTABLE TRI-ROLLER SWAGING TOOL | 2 | |
| IPSTS302T001-804 | PORTABLE SWAGING TOOL | 1 | |
| IPSTS302T001-805 | PORTABLE SWAGING TOOL | 1 | |
| IPUT4104-10 | PORTABLE U-ROLLER SWAGING TOOL FOR BEARING MS 14102-10 | 1 | |
| IPUT4104-14 | PORTABLE U-ROLLER SWAGING TOOL FOR BEARING MS 14102-14 | 1 | |
| IPUT4104-6 | PORTABLE U-ROLLER SWAGING TOOL FOR BEARING MS 14102-6 | 1 | |
| IPUT4104-7 | PORTABLE U-ROLLER SWAGING TOOL FOR BEARING MS 14104-7 | 1 | |
| J26004-49 | Cable - Fire Extinguishing System (Cargo/LLAR): Refer To The Tool Drawing, Usage Table, To Determine The Required Cables. | 7 | |
| J55007-1 | Rigging tool-horizontal stabilizer trim actuator null position | 1 | |
| JPTS-V2 | PORTABLE TOOL BAG | 1 | |
| K27016-1 | 787 HORZ STAB ACT - BALL NUT TOOL | 9 | |
| K55002-45 | 787 HORIZONTAL STABILIZER LOCK TOOL | 10 | |
| K9A-PORTABLE-LIGHT | RECHARGABLE PORTABLE LIGHT TOOL | 1 | |
| KMC18AVTK | TOOL KIT,AIRCRAFT MAINTENANCE;|AIRCRAFT MAINTENANCE KIT WITH PORTABLE CHEST; | 2 | |
| KRA24 | 17-INCH PORTABLE METAL TOOLBOX | 2 | |
| LRGADJSPANNER | LARGE ADJUSTABLE SPANNER TOOL | 1 | |
| M22520/1-01 | CRIMP TOOL - INDENT, ADJUSTABLE | 26 | |
| M22520/1-05 | ADJUSTABLE TOOL POSITIONER FOR M22520/1-01 | 9 | |
| M22520/2-01 | MINI ADJUSTABLE CRIMP TOOL(LOWER RANGE) | 18 | |
| M22520/7-01 | ADJUSTABLE CRIMP TOOL | 9 | |
| M621A1001101-S5330 | WIDE TABS FOLDING TOOL | 1 | |
| ME5100 | TOOL SPINNING AJUSTABLE | 1 | |
| ME65B00163 | TOOL - VERT STAB | 1 | |
| MH860 | Adjustable Middle Range 8 Indent Crimp Tool | 9 | |
| MIRROR,PICK UP AND INSPECTION TOOL, MAGNETIC, ADJUSTABLE LIFTS 1 1/2 LB. | MIRROR,PICK UP AND INSPECTION TOOL, MAGNETIC, ADJUSTABLE LIFTS 1 1/2 LB. | 1 | |
| MIT002A0001-107 | TAB MECHANISM LUG LOCATING TOOL | 1 | |
| MIT002A0016-1 | 737NG STABILIZER MODIFICATION TOOLS | 1 | |
| MIT183A8100 | ELEVATOR TAB ASSEMBLY SUPPORT TOOL | 2 | |
| MIT65-73715-1 | MISC. TOOL ELEVATOR AND TAB TRAVEL PROTRACTOR | 2 | |
| MIT65-73715-1,-2 | MISC. TOOL ELEVATOR AND TAB TRAVEL PROTRACTOR | 1 | |
| MIT65-73715-2 | MISC. TOOL ELEVATOR AND TAB TRAVEL PROTRACTOR | 1 | |
| MIT65C19080-10 | HORIZONTAL STABILIZER REWORK FAIL SAFE RETROFIT TOOL KIT | 1 | |
| MIT65C22125-10 | KIT TOOL – ATTACH FITTING BUSHING REPLACEMENT, HORIZONTAL STAB | 1 | |
| MIT65C22125-20 | KIT TOOL – ATTACH FITTING BUSHING REPLACEMENT, HORIZONTAL STAB. CENTER SECTION | 1 | |
| MIT65C25798-13 | MISCELLANEOUS TOOL HINGE FITTINGS ELEVATOR TAB ASSY | 3 | |
| MIT69-72039 | HORIZONTAL STABILIZER ATTACHMENT REWORK TOOL KIT | 3 | |
| MS1410-12BB-P | PORTABLE SWAGING TOOL | 1 | |
| MS14101-7P | PORTABLE CUTTING TOOL | 1 | |
| MS14102-7P | PORTABLE ROLLER SWAGING TOOL | 1 | |
| MTSATH1216R | ADJUSTABLE SPRING TOOL HOLDER | 1 | |
| MY28 | LARGE ADJUSTABLE HAND CRIMP TOOL | 6 | |
| NK | SKYKIT®-4, 30 TOOL ACCOUNTABILITY KIT (CUSTOM) | 1 | |
| NPC3006 | CUTTER TOOLS - PORTABLE | 1 | |
| NPC3009 | CUTTER TOOLS - PORTABLE | 1 | |
| NPIR3006 | TOOL, INSTALL&REMOVAL, PORTABLE MS14101-6&MS14103-6 SERIES | 1 | |
| NPT3006 | TRI-ROLLER PORTABLE BEARING TOOL | 1 | |
| NPT3008 | TRI-ROLLER PORTABLE BEARING TOOL | 1 | |
| NPT3016 | PORTABLE BEARING SWAGING TOOL | 1 | |
| NSA 8133-7 | PORTABLE CUTTING TOOL- IPCT | 1 | |
| NSA8133-07 | PORTABLE ROLLER SWAGING TOOL | 1 | |
| NSA8133-09 | PORTABLE ROLLER SWAGING TOOL | 1 | |
| OBSTACLE DATABASE | OBSTACLE DATABASE TOOL | 1 | |
| OHME65B80713-1 | FREEPLAY RUDDER HORSTAB TOOL B747 | 6 | |
| OHMEC27050 | TOOL, STABILIZER | 1 | |
| OU190359 | STAB LOCK O POSITION TOOL | 4 | |
| OU190686 | HOZ STAB BACKLASH TOOL | 8 | |
| OU190844 | STAB BRAKE DISCONNECT TOOL | 29 | |
| OU190844-320 | STAB BRAKE DISCONNECT TOOL | 1 | |
| OU190857 | STAB BRAKE JAMMING TOOL | 28 | |
| OU191069 | STAB BRAKE JAMMING TOOL | 12 | |
| P-CUT-MS14101-7 | PORTABLE CUTTING TOOL | 1 | |
| P-CUT-MS14103-7 | PORTABLE CUTTING TOOL | 1 | |
| P-CUT-MS14103-7A | PORTABLE CUTTING TOOL | 1 | |
| P-CUT-MS14103-9 | PORTABLE CUTTING TOOL | 1 | |
| P-IPR-KIT-MS14101-7 | PORTABLE INSTALLATION, PROOF-LOAD, REMOVAL TOOL | 1 | |
| P-IPR-KIT-MS14103-7 | PORTABLE INSTALLATION, PROOF-LOAD, REMOVAL TOOL | 1 | |
| P-RST-.650-312-MS14101-5 | PORTABLE ROLLER SWAGING TOOL | 1 | |
| P2K-615A-05 | DATA LOADER - PORTABLE, ARINC-615A S CAPABLE WITH MASS STORAGE DEVICE. TOOL MODEL NAME IS PMAT2000 | 2 | |
| P2K-615A-06 | DATA LOADER - ARINC-615A, PORTABLE (TOOL MODEL NAME IS PMAT2000) | 3 | |
| PBS-4100 | PORTABLE BALANCING SYSTEM TOOL | 5 | |
| PCT4103-7 | PORTABLE CUTTING TOOL- IPCT | 1 | |
| POT-WATER-CHARGING | PORTABLE WATER CHARGING TOOL | 1 | |
| PS4091501-103 | SATCOM OWNER REQUIREMENTS TABLE (ORT) TOOL | 2 | |
| PW100 | TOOL - EQPT POTABLE WATER SERVICING | 1 | |
| PWA107309 | STABILIZATION TOOL NOTCH GAUGE SUPPORT | 5 | |
| PWC30458 | TABBING/LOCKING TOOL | 10 | |
| PWC30458-A | TABBING/LOCKING TOOL | 1 | |
| Q47963 | TOOL EXTRACTION TAB WASHERS STALOK | 7 | |
| RB 92700-10313-045 | TRIM TAB TOOL | 2 | |
| RB 92700-10313-045-13 | TRIM TAB ADJUSTMENT TOOL | 2 | |
| RB T103317-101 | Tab Bending Tool | 3 | |
| RB600N1002 | Vertical Tab Bending Tool | 1 | |
| RBE350A94-3700-C | Swashplate Immobilizing Tools Adjustable Brace | 1 | |
| RBE703A94-1130-01 | Main Rotor Blade Trim Tab Tools | 3 | |
| RBEC13502 | TRIM TAB TOOL | 2 | |
| RBEM621A1001101 S5330 | WIDE TABS FOLDING TOOL | 2 | |
| RBH9928-101 | Dial Indicator Trim Tab Tool | 2 | |
| RBSC4103-3P | Portable Bearing Cutter Tool | 2 | |
| RBST2812-P | Portable Tri-Roller Staking Tool | 3 | |
| RBST3001-P | Portable Tri-Roller Staking Tool | 2 | |
| RBST3002-P | Portable Tri-Roller Staking Tool | 2 | |
| RBST3003-P | Portable Tri-Roller Staking Tool | 2 | |
| RBST3004-P | Portable Tri-Roller Staking Tool | 2 | |
| RBST3006-P | Portable Tri-Roller Staking Tool | 2 | |
| RBST3007-P | Portable Tri-Roller Staking Tool | 1 | |
| RBST3008-P | Portable Tri-Roller Staking Tool | 2 | |
| RBST3009-P | Portable Tri-Roller Staking Tool | 1 | |
| RBST3010-P | Portable Tri-Roller Staking Tool | 2 | |
| RBST3011-P | Portable Tri-Roller Staking Tool | 1 | |
| RBST3016-P | Portable Tri-Roller Staking Tool | 1 | |
| RBST4147-P | Portable Tri-Roller Staking Tool | 1 | |
| RBT | ADJUSTABLE EXPANSIVE ROLLER BURNISHING TOOL DIAMETER RANGE: 22.225 TO 22.246 MM (0.8749 TO 0.8758 IN) | 1 | |
| RBT-NOMINAL-22MM | ADJUSTABLE EXPANSIVE ROLLER BURNISHING TOOL | 1 | |
| RBT400352 | T/TAB BENDING TOOL | 2 | |
| RBW6205G03532-3G | Main Rotor Blade Trim Tab Tool | 2 | |
| RBW6205G03632-3G | Main Rotor Trim Tab Bending Tool | 2 | |
| RBW6210G00331-8G | M/R BLADE TRIM TAB BENDING TOOL | 2 | |
| RBW895-3101-04-201 | MR TRIM TAB BENDING TOOL | 2 | |
| RCK7028 | PORTABLE CUTTING TOOL | 1 | |
| RD-AK09ZB006 | 374 CONFIG DATABASE DISC TOOL | 1 | |
| RKC4101-10 | PORTABLE CUTTING TOOL | 2 | |
| RKC4101-12 | PORTABLE CUTTING TOOL | 3 | |
| RKC4101-3 | PORTABLE CUTTING TOOL | 2 | |
| RKC4101-4 | PORTABLE CUTTER TOOL | 3 | |
| RKC4101-5A | PORTABLE SWAGING TOOL | 2 | |
| RKC4101-6 | PORTABLE SWAGING TOOL | 3 | |
| RKC4101-7 | PORTABLE CUTTER TOOL | 2 | |
| RKC4101-8 | PORTABLE SWAGING TOOL | 2 | |
| RKC4103-10 | CUTTING TOOL (PORTABLE) | 2 | |
| RKC4103-12 | PORTABLE CUTTING TOOL | 2 | |
| RKC4103-4 | PORTABLE CUTTING TOOL | 2 | |
| RKC4103-5 | CUTTING TOOL (PORTABLE) | 2 | |
| RKC4103-6 | PORTABLE CUTTING TOOL | 2 | |
| RKC4103-8 | PORTABLE CUTTING TOOL | 2 | |
| RKC7003 | CUTTING TOOL (PORTABLE) | 1 | |
| RKC7004 | PORTABLE CUTTING TOOL | 1 | |
| RKC7005 | PORTABLE CUTTING TOOL | 1 | |
| RKC7011 | PORTABLE CUTTING TOOL | 1 | |
| RKC7048 | PORTABLE CUTTING TOOL | 2 | |
| RKC7124 | PORTABLE CUTTING/REMOVAL TOOL | 2 | |
| RKC7125 | PORTABLE CUTTING TOOL | 1 | |
| RKC7160 | PORTABLE CUTTING TOOL | 1 | |
| RKC7211 | PORTABLE BEARING CUTTING TOOL | 1 | |
| RKC7339 | TOOL, PORTABLE CUTTING | 1 | |
| RKC7394 | PORTABLE BEARING CUTTING TOOL | 1 | |
| RKC7395 | CUTTER-TOOL, PORTABLE | 1 | |
| RRT112901 | INTERCHANGEABLE TOOL OF THE NUT WRENCH TYPE FOR DYNAMOMETRIC HAND TOOL SUITABLE FOR THE CONTROL OF THE APPLIED TORQUE | 1 | |
| RRT112901-1 | INTERCHANGEABLE TOOL OF THE NUT WRENCH TYPE FOR DYNAMOMETRIC HAND TOOL SUITABLE FOR THE CONTROL OF THE APPLIED TORQUE | 1 | |
| RRT4101-10 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4101-11 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4101-12 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4101-13 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4101-14 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4101-15 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4101-16 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4101-3 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4101-4 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4101-5 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4101-6 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4101-7 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4101-8 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4101-9 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4103-10 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4103-11 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4103-12 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4103-13 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4103-14 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4103-15 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4103-16 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4103-3 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4103-4 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4103-5 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4103-6 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4103-7 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4103-8 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RRT4103-9 | TOOLS, PORTABLE -0 REMOVABLE | 1 | |
| RST1006 | PORTABLE TREE ROLLER SWANGING TOOL | 3 | |
| RST2448 | BEARING SWAGING TOOL P/N RST2448 REXNORD CORP PORTABLE SUPPLIER ITEM NO: RST2448 | 2 | |
| RST2463 | Portable Bearing Swaging Tool | 2 | |
| RST2497 | PORTABLE TRI-ROLLER SWAGING TOOL EQUIVALENT TO RST2497 SUITED FOR BEARING BACB10FA09G | 2 | |
| RST2515 | TOOL, PORTABLE STAKING | 4 | |
| RST2641 | PORTABLE SWAGING TOOL | 1 | |
| RST2654 | PORTABLE SWAGING TOOL | 1 | |
| RST2655 | PORTABLE SWAGING TOOL | 1 | |
| RST2684 | PORTABLE TRI ROLLER SWAGING TOOL | 2 | |
| RST2699 | SWAGING TOOL (PORTABLE) | 1 | |
| RST2706 | PORTABLE ROLLER SWAGING TOOL | 1 | |
| RST2707 | PORTABLE ROLLER SWAGING TOOL | 1 | |
| RST2708 | PORTABLE ROLLER SWAGING TOOL | 1 | |
| RST2714 | PORTABLE ROLLER SWAGING TOOL | 1 | |
| RST2756 | TOOL, PORTABLE STAKING | 2 | |
| RST2757 | PORTABLE SWAGING TOOL | 1 | |
| RST2795 | PORTABLE SWAGING TOOL | 2 | |
| RST2815 | PORTABLE SWAGING TOOL | 2 | |
| RST2885 | PORTABLE SWAGING TOOL | 1 | |
| RST2922 | PORTABLE SWAGING TOOL | 2 | |
| RST2971 | TOOL, STAKING, PORTABLE | 1 | |
| RST3000 | TOOL, PORTABLE SWAGING | 2 | |
| RST3001 | TOOL, PORTABLE SWAGING | 2 | |
| RST3002 | TOOL, PORTABLE SWAGING | 4 | |
| RST3003 | TOOL, PORTABLE SWAGING | 3 | |
| RST3004 | TOOL, PORTABLE SWAGING | 2 | |
| RST3005 | TOOL, PORTABLE SWAGING | 2 | |
| RST3006 | TOOL, PORTABLE SWAGING | 2 | |
| RST3006DRWSLV | TOOL, PORTABLE SWAGING -0 ROLLER SET | 1 | |
| RST3006HARD | TOOL, PORTABLE SWAGING -0 ROLLER SET | 1 | |
| RST3006R0L | TOOL, PORTABLE SWAGING -ROLLER SET | 1 | |
| RST3006SR | TOOL, PORTABLE SWAGING -0 ROLLER SET | 1 | |
| RST3007 | TOOL, PORTABLE SWAGING | 3 | |
| RST3008 | TOOL, PORTABLE SWAGING | 3 | |
| RST3009 | TOOL, PORTABLE SWAGING | 2 | |
| RST3010 | TOOL, PORTABLE SWAGING | 2 | |
| RST3011 | TOOL, PORTABLE SWAGING | 2 | |
| RST3012 | TOOL, PORTABLE SWAGING | 2 | |
| RST3013 | TOOL, PORTABLE SWAGING | 2 | |
| RST3014 | TOOL, PORTABLE SWAGING | 2 | |
| RST3015 | TOOL, PORTABLE SWAGING | 2 | |
| RST3016 | TOOL, PORTABLE SWAGING | 2 | |
| RST3017 | TOOL, PORTABLE SWAGING | 2 | |
| RST3018 | TOOL, PORTABLE SWAGING | 1 | |
| RST3019 | TOOL, PORTABLE SWAGING | 2 | |
| RST3020 | TOOL, PORTABLE SWAGING | 2 | |
| RST4010 | PORTABLE ROLLER SWAGING TOOL | 1 | |
| RST4030 | TOOL, STAKING, PORTABLE | 1 | |
| RST4079 | TOOL, SWAGING, PORTABLE | 1 | |
| RST4141 | TOOL, SWAGING PORTABLE | 1 | |
| RST4146 | TOOL, STAKING, PORTABLE | 1 | |
| RST4183 | PORTABLE SWAGING TOOL | 1 | |
| RST4187 | PORTABLE SWAGING TOOL | 2 | |
| RST4265 | PORTABLE SWAGING TOOL | 1 | |
| RST4287 | PORTABLE SWAGING TOOL 77896-RST4287 | 2 | |
| RST4296 | PORTABLE TRI-ROLLER SWAGING TOOL | 1 | |
| RST4354 | TOOL, PORTABLE SWAGE | 1 | |
| RST4389 | TOOL, PORTABLE SWAGING | 1 | |
| RST4480 | TOOL, SWAGING PORTABLE | 1 | |
| RST4703 | PORTABLE BEARING SWAGING TOOL | 1 | |
| RST4916 | TOOL, STAKING, PORTABLE | 2 | |
| RST5072 | TOOL, PORTABLE SWAGING | 1 | |
| RST5136 | TOOL, PORTABLE CONCAVE ROLLERS | 1 | |
| SBE2213 | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 6 | |
| SCTH625 | .062" Hydraulic Adjustable Tension Safe-T-Cable® Application Tool with 5" Nose | 2 | |
| SCTPR323 | Adjustable Tension, Pneumatic Safe-T-Cable Application Tool with 3 Inch Nose for .032" Safe-T-Cable | 1 | |
| SCTPRM203 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 3" Nose for for .022" Safe-T-Cable | 2 | |
| SCTPRM207 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 7" Nose for for .022" Safe-T-Cable | 2 | |
| SCTPRM323 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 3" Nose for for .032" Safe-T-Cable | 2 | |
| SCTPRM327 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 7" Nose for for .032" Safe-T-Cable | 2 | |
| SCTPRM403 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 3" Nose for for .040" Safe-T-Cable | 2 | |
| SCTPRM407 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 7" Nose for for .040" Safe-T-Cable | 2 | |
| SCTR203 | Adjustable Tension, Hand Operated, Safe-T-Cable Application Tool with 3 Inch Nose for .022 Safe-T-Cable | 2 | |
| SCTR207 | Adjustable Tension, Hand Operated, Safe-T-Cable Application Tool with 7 Inch Nose for .022 Safe-T-Cable | 2 | |
| SCTR323 | Adjustable Tension, Safe-T-Cable Application Tool with 3 Inch Nose for .032 Safe-T-Cable | 4 | |
| SCTR327 | Adjustable Tension, Hand Operated, Safe-T-Cable Application Tool with 7 Inch Nose for .032 Safe-T-Cable | 4 | |
| SCTR327L | .032" ADJUSTABLE TENSION SAFE-T-CABLE® APPLICATION TOOL WITH 7" LOW-PROFILE NOSE | 3 | |
| SCTR403 | Adjustable Tension, Hand Operated, Safe-T-Cable Application Tool with 3 Inch Nose for .040 Safe-T-Cable | 3 | |
| SCTR407 | Adjustable Tension, Hand Operated, Safe-T-Cable Application Tool with 7 Inch Nose for .040 Safe-T-Cable | 2 | |
| SCTR409 | Adjustable Tension, Hand Operated, Safe-T-Cable Application Tool with 9 Inch Nose for .040 Safe-T-Cable | 2 | |
| SINK UNBLOCK TOOL | STAB TEST TOOL | 1 | |
| SKYKIT - 6 | CIRCUIT BREAKER KIT (70 TOOL ACCOUNTABILITY | 1 | |
| SKYKIT-6 | 70 TOOL ACCOUNTABILITY KIT | 1 | |
| SL-90-313-4375 | TOOL - INSTALLATION, TAB-WASHERS STA-LOK NSA5454 | 13 | |
| SL-90-313-5625 | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 22 | |
| SL90-309-1-1250 | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 9 | |
| SL90-309-1250 | TOOL INSTALLATION TAB WASHER STA-LOK | 1 | |
| SL90-309-7500 | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 8 | |
| SL90-310-1-1250 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 7 | |
| SL90-310-7500 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 7 | |
| SL90-313-.3750 | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 17 | |
| SL90-313-.5625 | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 22 | |
| SL90-313-.7500 | Tool, Tab Washer Install | 16 | |
| SL90-313-.8750 | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 8 | |
| SL90-313-1-0000 | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 8 | |
| SL90-313-1-1250 | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 6 | |
| SL90-313-1-2500 | TOOL- INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 3 | |
| SL90-313-1-5625 | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 3 | |
| SL90-313-1.0000 | Install tool TAB Washers | 8 | |
| SL90-313-1.2500 | Install tool TAB Washers Sta-Lock NSA5454 | 3 | |
| SL90-313-3750 | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 17 | |
| SL90-313-4375 | TOOL - INSTALLATION, TAB-WASHERS STA-LOK NSA5454 | 13 | |
| SL90-313-5000 | TOOL - INSTALLATION, TAB WASHER STA-LOK NSA5454 | 15 | |
| SL90-313-5625 | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 22 | |
| SL90-313-6250 | TOOL- INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 14 | |
| SL90-313-7500 | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 16 | |
| SL90-313-8750 | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 8 | |
| SL90-313-8750 | TOOL - INSTALLATION, TAB WASHERS | 8 | |
| SL90-314-.3750 | TOOL, TAB WASHER REM | 20 | |
| SL90-314-.4375 | TOOL, TAB WASHER REM | 11 | |
| SL90-314-.5000 | TOOL, TAB WASHER REM | 15 | |
| SL90-314-.5625 | TOOL, TAB WASHER REM | 25 | |
| SL90-314-.6250 | Tool, Tab Washer Removal | 18 | |
| SL90-314-.7500 | TOOL, TAB WASHER REM | 24 | |
| SL90-314-1-0000 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 9 | |
| SL90-314-1-1250 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 5 | |
| SL90-314-1-2500 | TOOL- EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 7 | |
| SL90-314-1-3750 | TAB WASHER TOOL | 1 | |
| SL90-314-1-5000 | TOOL - EXTRACTION, TAB WASHERS STA-LOK | 1 | |
| SL90-314-1-5625 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 6 | |
| SL90-314-1.2500 | TOOL- EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 7 | |
| SL90-314-10000 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 9 | |
| SL90-314-15000 | TAB WASHER TOOL | 1 | |
| SL90-314-3750 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 20 | |
| SL90-314-3750 | TOOL-EXTRACTION, TAB WASHERS | 20 | |
| SL90-314-4375 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 11 | |
| SL90-314-5000 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 15 | |
| SL90-314-5625 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 25 | |
| SL90-314-5625 | TOOL-EXTRACTION, TAB WASHERS | 25 | |
| SL90-314-6250 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 18 | |
| SL90-314-7500 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 24 | |
| SL90-314-7500 | TOOL-EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 24 | |
| SL90-314-8750 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 9 | |
| SL90-314-8750 | TOOL - EXTRACTION, TAB WASHERS | 9 | |
| SL90-315-1-1250 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 3 | |
| SL90-315-1-2500 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 5 | |
| SL90-315-1.2500 | Tool - Installation Tab Washer | 5 | |
| SL90-315-10000 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 6 | |
| SL90-315-3750 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 18 | |
| SL90-315-4375 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 12 | |
| SL90-315-5000 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 10 | |
| SL90-315-5625 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 15 | |
| SL90-315-6250 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 12 | |
| SL90-315-7500 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 15 | |
| SL90-315-8750 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 4 | |
| SL90-322-5625 | TAB WASHER INST TOOL NAS5454 | 23 | |
| SL90-349-.5000 | TOOL- INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 3 | |
| SL90-349-.7500 | Tool, Tab Washer Install | 17 | |
| SL90-349-5000 | TOOL- INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 3 | |
| SL90-349-6875 | TOOL- INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 6 | |
| SL90-349-7500 | TOOL-INSTALLATION,TAB WASHERS STA-LOK NSA5454 | 17 | |
| SL90-350-.7500 | TOOL TAB WASHER REM. | 21 | |
| SL90-350-1-0000 | TOOL - EXTRACTION, TAB WASHERS STA-LOK N | 1 | |
| SL90-350-1-1250 | TOOL - EXTRACTION, TAB WASHERS STA-LOK N | 1 | |
| SL90-350-1-2500 | TOOL - EXTRACTION, TAB WASHERS STA-LOK N | 1 | |
| SL90-350-1-3750 | TOOL - EXTRACTION, TAB WASHERS STA-LOK N | 1 | |
| SL90-350-1-5625 | TOOL - EXTRACTION, TAB WASHERS STA-LOK N | 1 | |
| SL90-350-3750 | TOOL - EXTRACTION, TAB WASHERS STA-LOK N | 1 | |
| SL90-350-5000 | TOOL- EXTRACTION, TAB WASHERS STA-LOK NSA 5454 | 6 | |
| SL90-350-5625 | TOOL - EXTRACTION, TAB WASHERS STA-LOK N | 1 | |
| SL90-350-6250 | TOOL - EXTRACTION, TAB WASHERS STA-LOK N | 1 | |
| SL90-350-6875 | TOOL- EXTRACTION, TAB WASHERS STA-LOK NSA 5454 | 6 | |
| SL90-350-7500 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA 5454 | 21 | |
| SL90-350-8750 | TOOL - EXTRACTION, TAB WASHERS STA-LOK N | 1 | |
| SL90-356-3750 | TOOL- EXTRACTION, TAB WASHERS STA-LOK NSA 5454 | 4 | |
| SL90-359-3750 | TOOL- INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 4 | |
| SL90-374-6250 | TOOL - EXTRACTION, TAB WASHERS | 15 | |
| SL90-414-5625 | EXTRACTION TOOL TAB | 1 | |
| SL90-487-.6250 | TOOL- INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 4 | |
| SL90-487-6250 | TOOL- INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 4 | |
| SL90-626-3125 | TOOL TAB WAS STA-LOK | 14 | |
| SL90.310-1.1250 | TOOL-EXTRACTION, TAB WASHERS STA-LOK | 7 | |
| SL90.313-.5625 | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 22 | |
| SL90.314-1.2500 | TOOL-EXTRACTION TAB WASHERS STA LOK | 7 | |
| SL90.349-1.0000 | TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| SL90314-1-000 | TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 | 1 | |
| SL90A320 | TOOLSET OF SL90 WRENCHES AND TABS | 1 | |
| SLT600G6 | SHUR-LOK GUIDE TOOL & TAB | 2 | |
| SMT-P-CUT-MS14101-9 | THIS IS A PORTABLE CUTTING TOOL FOR BEARING MS14101-9 | 1 | |
| SMT-P-IPR-KIT-MS14101-9 | HIS IS A PORTABLE INSTALLATION, PROOF-LOAD, REMOVAL TOOL FOR BEARING MS14101-9 | 1 | |
| SPANNER | LARGE ADJUSTABLE TOOL | 1 | |
| SPL-5375 | LE Slat Actuator Lock Washer Tab Bending Tool | 1 | |
| SPL-9358 | MEASUREMENT TOOL - STABILIZER SYSTEM TEST | 1 | |
| SPW-350 | TOOL - EQPT POTABLE WATER SERVICING | 1 | |
| SPW-500PL | TOOL - EQPT POTABLE WATER SERVICING | 1 | |
| ST1066-24 | STANDARD TOOL-ASSEMBLY AID,GAP COVER SEAL 737 HORIZ STAB | 1 | |
| ST8770R | AILERON TRIM TAB MEASURING TOOL | 1 | |
| ST918A-312-812 | ELEVATOR TAB HING BEARING SWAGING TOOL | 1 | |
| ST919-812 | ELEVATOR TAB HING BEARING SWAGING TOOL | 1 | |
| ST926B | ROLLER STAKING TOOL - PORTABLE, HAND OPERATED | 1 | |
| ST926B-601B | Standard tool roller staking tool-portable hand operated | 1 | |
| ST928C-4 | ELEVATOR TAB HING BEARING SWAGING TOOL | 8 | |
| ST931A | BEARING STAKING TOOL - ADJUSTABLE BALL POINT | 2 | |
| ST931D | BEARING STAKING TOOL -ADJUSTABLE BALL POINT | 1 | |
| STAB BEARING CHECK DIAL | STAB BEARING CHECK DIAL TOOL | 1 | |
| STAB-BAY-767-LADDER | LADDER FOR STAB BAY 767 TOOL | 1 | |
| STAB-PX-CHECK-GAUGE | B767 STAB PRESS.GAUGE & HOSE TOOL | 1 | |
| STABNEUTRAL | STABILIZER NEUTRAL GAUGE TOOL | 1 | |
| T-7764EX | Taylor Tool - TAYLOR Externally Adjustable Screw Gun | 1 | |
| T101597/101598 | B205/212 Trim Tab Tool Set | 1 | |
| T101654-101 | TOOL TAB M/R | 1 | |
| T103316/T103317-101 | B407 Tab Tool Set | 1 | |
| T103317-101 | TAB BENDING TOOL | 1 | |
| TBT04 | 4PC LOCKING PLIERS & ADJUSTABLE WRENCH SET WITH TOOL TRAY | 1 | |
| TF50B27511 | TOOL, HORZ, STAB, ACT, SHA | 1 | |
| TH6 | BIT FOR PASSENGER SEAT TABLE LATCH R/I TOOL (TH6 SNAKE EYEX) | 1 | |
| TH6 SNAKE EYEX | BIT FOR PASSENGER SEAT TABLE LATCH R/I TOOL | 1 | |
| TM3351G001 | TAB WASHER INSTALLATION TOOL | 1 | |
| TM7038753-001 | COMPACT DISK - DATABASE LOADING PRE PROCESSOR TOOL | 3 | |
| TN023771 | HORIZONTAL STABILIZER PIVOT PIN TOOLS | 2 | |
| TN312585 | TRIM TAB FREE PLAY TOOL | 1 | |
| TN326330 | PIN ALIGNMENT TOOL, HORIZONTAL STABILIZER FITTINGS | 1 | |
| TN459383 | RUDDER TRIM TAB TOOL | 1 | |
| TOOL131 | McFarlane TOOL131 Cessna Aircraft Stabilizer Jack Screw Pin Removal Tool | 1 | |
| TS1171 | TRIM TAB CABLE STOP TOOL NOTE A 3/8 INCH DRIVE SOCKET CAN BE MODIFIED TO ENGAGE THE SLOTS ON THE TRIM TAB CABLE STOP CASTELLATED NUT. THE MODIFIED SOCKET CAN BE USED AS A TORQUE ADAPTER INSTEAD OF THIS TOOL. (BEECHCRAFT CORP) | 2 | |
| TS1171 (SN# L20843, TOOL CODE # D928) | TRIM TAB CABLE STOP TOOL NOTE A 3/8 INCH DRIVE SOCKET CAN BE MODIFIED TO ENGAGE THE SLOTS ON THE TRIM TAB CABLE STOP CASTELLATED NUT. THE MODIFIED SOCKET CAN BE USED AS A TORQUE ADAPTER INSTEAD OF THIS TOOL. (BEECHCRAFT CORP) | 1 | |
| TS8000 | ADJUSTABLE TWIST STRIP TOOL | 1 | |
| TTT-119/109-Kit | BLADE TAB BENDING TOOL | 1 | |
| TTT-119A | AGUSTA 119/109 TRIM TAB TOOL SET | 1 | |
| TTT-135 | TRIM TAB TOOL | 1 | |
| TTT-135A | EC135, EC145, UH72, BK117, BO105 TRIM TAB TOOL | 1 | |
| TTT-350 | AS350, AS355, EC120, EC130 TRIM TAB TOOL SET | 1 | |
| TTT-407A | BELL 407 TRIM TAB TOOL SET | 1 | |
| TTT-429A | BELL 429 REIM TAB TOOL SET | 1 | |
| TWS-402 | TOOL - EQPT POTABLE WATER SERVICING | 1 | |
| U12A270000A | TOOLS KIT FOR HORIZONTAL STABILIZER BEARING EXCHANGE | 1 | |
| WA27F | CRIMP TOOL - INDENT, ADJUSTABLE | 3 | |
| WC100E | TOOL - EQPT POTABLE WATER SERVICING | 1 | |
| WSP-900 | TOOL - EQPT POTABLE WATER SERVICING | 1 | |
| WT145A | ADJUSTABLE CRIMP TOOL | 2 | |
| WT145C | ADJUSTABLE CRIMPING TOOL | 1 | |
| WTM-900 | TOOL - EQPT POTABLE WATER SERVICING | 1 | |
| WWG437U16 | PLASTIC PORTABLE TOOL BOX | 1 | |
| YA486 | TOOL BOX,PORTABLE:27 1/2 X 13 3/8 X 14 I | 2 | |
| f 70261-1 | Rigging Tool-Stabilizer Trim Control | 2 | |
| f 80177-14 | pin remover tool-horizontal stab | 5 | |
| f70261-1 | Rigging Tool-Stabilizer Trim Control | 2 | |
| f80177-14 | pin remover tool-horizontal stab | 5 | |
| ТТТ-135А | TRIM TAB TOOL SET | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
