| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0301020420 | T UNION | 1 | |
| 332A94-5802-20 | T UNION | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) D10033-06060404 | UNION (CALIBRATION) | 1 | |
| (CALIB) D10036-04 | UNION (CALIBRATION) | 1 | |
| (CALIB) D10036-06 | UNION (CALIBRATION) | 1 | |
| (CALIB) D10036-08 | UNION (CALIBRATION) | 1 | |
| (CALIB) D10036-10 | UNION (CALIBRATION) | 1 | |
| (CALIB) D10036-12 | UNION (CALIBRATION) | 1 | |
| 289 | TRUNION | 6 | |
| 5930 | ADAPTER (FOR UNION P/NO. 35066-08) | 3 | |
| 5990 | ADAPTER (FOR UNION P/NO. 35066-16) | 1 | |
| 5998 | JAW SET (FOR UNION P/NO. 35066-08) | 1 | |
| 9109 | UNION JOINT | 1 | |
| 15058 | FLEX DUCT UNION | 1 | |
| 0000260020 | NUT,UNION | 1 | |
| 0000260440 | UNION NUT | 1 | |
| 0000267000 | NUT,UNION,EQUIPPED | 1 | |
| 0000280340 | THREADED UNION | 1 | |
| 0000280690 | UNION,THREADED | 1 | |
| 0000281080 | UNION THREADED | 1 | |
| 0000365860 | STRAIGHT UNION | 1 | |
| 0000370210 | THREE WAY UNION | 1 | |
| 0000372240 | UNION,OIL OUTLET | 1 | |
| 0000372660 | UNION D20 AT 10 | 1 | |
| 0000372670 | UNION D 32 AT 57 | 1 | |
| 0000372900 | UNION,SUCTION | 1 | |
| 00433-305-000 | UNION TE | 1 | |
| 716904 | UNION,TUBE | 1 | |
| 1020145 | BRASS T UNION1/4 NPT (F) | 1 | |
| 2529626 | UNION FLARED TUBE | 1 | |
| 6799523 | ADAPTER - TRUNION, TURBINE ROTOR STAND | 2 | |
| 0235220730 | UNION NUT | 1 | |
| 0235227660 | PIPE,4WAY UNION/LH TORCH | 1 | |
| 0235227670 | PIPE,4WAY UNION RH TORCH | 1 | |
| 0235550290 | UNION END FITTING | 1 | |
| 0249930550 | ADAPTOR UNION | 1 | |
| 0264754180 | STARIGHT UNION | 1 | |
| 0292720730 | UNION,BREATHING | 1 | |
| 0292720760 | UNION,BREATHING,ACCESSORIES. GEAR | 1 | |
| 0292720820 | UNION,BREATHING,ACCESSORIES. GEAR | 1 | |
| 0292720840 | UNION,BREATHING,ACCESSORIES. GEAR | 1 | |
| 0298110280 | UNION,BREATHER | 1 | |
| 0298720140 | THREADED UNION | 1 | |
| 0298737730 | UNION,TRANSFER | 1 | |
| 0301011170 | SUCTION UNION | 1 | |
| 0301020410 | T COUPLING UNION | 1 | |
| 0301020610 | THREADED UNION | 1 | |
| 0301030080 | UNION,JET | 1 | |
| 0301031250 | OIL INLET UNION | 1 | |
| 0301031730 | UNION, JET | 1 | |
| 0301040860 | UNION, THREATED | 1 | |
| 0301041580 | SUPPORT UNION | 1 | |
| 0301042140 | UNION NUT | 1 | |
| 0301042830 | P2 TAP PORT UNION | 1 | |
| 0301520550 | CONNECT.UNION | 1 | |
| 0301531000 | UNIONS SUPPORT | 1 | |
| 0319734000 | UNION,DRAIN COLLECTOR | 1 | |
| 0319740020 | UNION, THREADED | 1 | |
| 0322857040 | UNION,ASSY OF,ADAPTOR | 1 | |
| 0400310040 | UNION NUT | 1 | |
| 0400310050 | UNION NUT | 1 | |
| 0465720880 | BREATHER PIPE UNION, EQUIPPED | 1 | |
| 0465720970 | DEGASSING EXHAUST PIPE UNION | 1 | |
| 0999117930 | NUT,UNION | 1 | |
| 10 XHBU | Union Adapter | 1 | |
| 109-3130-65-101 | T/R TRUNION LOCKING | 1 | |
| 109-3130-66-101 | T/R TRUNION CENTERING | 1 | |
| 10ME65B00161-1 | TRUNION REMOVAL TOOL WLG | 2 | |
| 10XHBU | Union adapter | 1 | |
| 1159GSE50018-5/GSKT | SOCKET KIT, TRUNION-NOSE/MLG | 1 | |
| 12 XHBU | Union Adapter | 1 | |
| 12XHBU | Union adapter | 1 | |
| 133-388007-1 | PULLER-MLG TRUNION PIN. | 1 | |
| 145-67500-001-16H1 | TRUNION SPAR 3 ASSY JIG | 1 | |
| 14ME65B00161 | GUIDE ALIGNMENT WLG TRUNION BEARING | 3 | |
| 162A0302-1 | PIN TRUNION ASSY | 1 | |
| 16A24249L1-1 | WRENCH, UNION - EMERGENCY POWER UNIT | 2 | |
| 1QF2-2-44C90DEG | PITOT UNION 90 DEGREE | 1 | |
| 1QF2-3-64C90DEG | STATIC UNION 90 DEGREE | 1 | |
| 21C8392G01 | TRUNION, FAN MOTOR FORWARD | 1 | |
| 21C8393G01 | TRUNION FAN ROTOR AFT | 1 | |
| 2C5886G01 | TRUNION - DRIVE SHAFT LPT | 1 | |
| 2C91004G01 | ADAPTER - ROTOR TRUNION | 1 | |
| 2C91006G01 | ADAPTER - TRUNION | 1 | |
| 30.17.17.0404 | UNIÓN HEMBRA NPT 1/4" X 1/4" HEMBRA NPT | 1 | |
| 332A94-7505-531 | HYDRAULIC AUTOPILOT TEST-BENCH (ICO 13-70-30-02) NUT,UNION0001- | 1 | |
| 332A97-6701-001 | HYDRAULIC AUTOPILOT TEST-BENCH (ICO 13-70-30-02 NUT,UNION0001- | 1 | |
| 41-F-03 | UNION NUT IMPERIAL | 1 | |
| 4822T76 | UNION MALE-FEMALE NPT 1/8 AND BSP 1/8 | 1 | |
| 4916727-503 | MLG TRUNION BOLT GUIDE | 5 | |
| 4916727-505 | MLG TRUNION BOLT GUIDE | 7 | |
| 4M10F80MXS | UNION TRIPLE BODY | 1 | |
| 50844Z53 | KEY TAP UNION | 1 | |
| 5409031683 | TRUNION | 1 | |
| 55T541 | TRUNION | 1 | |
| 5916728-501 | PULLER TRUNION NLG | 5 | |
| 5955123-1 | MLG Trunion Pin Holder Set | 2 | |
| 5955282-1 | TRUNION BOLT TORQUE ADPT MLG | 4 | |
| 6-F65OX-S | SWIVEL STRAIGHT THREAD CONNECTOR UNION 916-18 UNF 34-16 UNF JIC | 1 | |
| 62C-8 | UNION FOR TUBE 1/2 (PARKER) | 1 | |
| 63041012-1 | Test Fixture (Hydraulic Union) | 1 | |
| 6MIT65B00163 | TRUNION BOLT TORQUE | 5 | |
| 751379ME | FILLING UNION (STRAIGHT QUICK-DISCONNECT COUPLING | 1 | |
| 7ME65-7376-1 | Trunion link spanner | 1 | |
| 7ME65-73761-1 | SPANNER WRENCH-MLG FORWARD TRUNION BEARING | 17 | |
| 8031-16-1 | JAW SET (FOR UNION P/NO. 35066-16) | 1 | |
| 818111-308 | UNION REMOVAL TOOL | 1 | |
| 856A2522G01 | Adapter Trunion 1&2 BRG Support | 1 | |
| 8816183131 | STRAIGHT UNION | 1 | |
| 8816183138 | STRAIGHT UNION | 1 | |
| 8816183157 | UNION TEE | 1 | |
| 8818333000 | ADAPTOR,UNION | 1 | |
| 8818339000 | UNION,ADAPTATOR | 1 | |
| 8818340000 | UNION,ADAPTOR | 1 | |
| 8818932000 | UNION,ADAPTATOR UNION,ADAPTATOR | 1 | |
| 8819387000 | UNION,ADAPTATOR | 4 | |
| 8819387000/PHP | UNION, ADAPTOR | 1 | |
| 8819389000 | UNION,ADAPTATOR | 5 | |
| 8819841000 | UNION,ADAPTATOR UNION,ADAPTATOR | 1 | |
| 8819841000/PHP | ADAPTATION UNION | 1 | |
| 8819842000 | UNION,ADAPTATOR | 1 | |
| 8819843000 | UNION,ADAPTATOR UNION,ADAPTATOR | 1 | |
| 8XHBU | Union adapter | 1 | |
| 9550117530 | RIGHT UNION | 1 | |
| 9550118460 | UNION, STRAIGHT | 1 | |
| 9550120100 | UNION,STRAIGHT | 1 | |
| 9550120110 | RIGHT UNION | 1 | |
| 9550121080 | STAIGHT UNION | 1 | |
| 9550138060 | RIGHT UNION | 1 | |
| 9560168290 | UNION, INJECTION | 1 | |
| 956A6013G01 | PIN TRUNION FRT ENG | 4 | |
| 9771060009 | NUT,UNION | 1 | |
| 9771080009 | UNION NUT | 1 | |
| 9771120009 | UNION NUT | 1 | |
| 9777030034 | THREADED UNION | 1 | |
| 9777040034 | THREADED UNION | 1 | |
| 9777100034 | THREADED UNION | 1 | |
| 98A21001000000 | I/R EQUIPMENT REFRIGERATION UNION | 2 | |
| 98A26213501000 | Wrench union nut | 8 | |
| 98A26213502000 | Wrench union nut | 7 | |
| 98A29113501000 | Wrench union nut | 8 | |
| 98A29113502000 | Wrench union nut | 7 | |
| 98D27504035000 | TORQUE ADAPTOR TRUNION | 20 | |
| 98D2750409500 | SPANNER, TRUNION NUT TRACK 1 | 1 | |
| 98F27508002000 | TEUNION BEARING WRENCH | 5 | |
| 98F29103005000 | RESTRICTING UNION | 5 | |
| 98F29103005001 | UNION RESTRICTING | 8 | |
| 98L27508853000 | WRENCH TRUNION | 1 | |
| 98L32104019202 | TRUNION | 1 | |
| 98L32104019204 | TRUNION BRACKET | 1 | |
| 9907087008 | UNION NUT | 1 | |
| 9963300801 | STRAIGHT UNION | 1 | |
| A24010-8 | Flareless Oil - Out Union | 1 | |
| A32011-1 | PULLER NLG TRUNION PIN | 13 | |
| A32026-60 | MLG TRUNION PIN REM/INS | 11 | |
| A32045-34 | WRENCH, FWD TRUNION BEARING NUT | 11 | |
| A330-92018-0001 | Pylon-Wing Mid Front Union Torque tool | 1 | |
| A330-92019-0001 | Pylon-pod front union torque tool | 1 | |
| A330-92020-0001 | Pylon-Wing central Union Torque tool | 1 | |
| A330-92021-0001 | Pod-Pylon Rear Union Torque tool | 1 | |
| A330-92022-0001 | Fairing-Wing Rear Union Torque tool | 1 | |
| A4TU4-MG | UNION TEE | 1 | |
| A500-3 | UNION-TEE | 1 | |
| A659275 | KEY FOR NUT OF THE ELBOW UNION | 1 | |
| AB29001-DW4 | AD-LG SELECTOR VALVES INSPECTION UNION | 1 | |
| AB29001-Y5K | AD-LG SELECTOR VALVES INSPECTION UNIONWITH CAPS | 1 | |
| AN4 UNION ADAPTER | AN4 MALE FLARE STRAIGHT UNION - ADAPTER 2-WAYS FIT | 1 | |
| AN815-10D | UNION, HOSE TO VALVE DISCHARGE PORT | 1 | |
| AN815-3D | UNION FITTING | 1 | |
| AN815-4 | UNION FLARED TUBE | 2 | |
| AN815-4C | FLARED TUBE UNION (5 REQUIRED) | 1 | |
| AS1036-4D | CROSS UNION TOOL | 1 | |
| AS21902J5 | UNION, FLARELESS TUBE(BT)TC/36-008-01-01 | 1 | |
| AS21902J6 | UNION, FLARELESS TUBE(BT)TC/36-008-01-01 | 1 | |
| AS33514E06 | UNION - FITTING, 3/8 | 1 | |
| AS5174D1010 | UNION, HOSE TO VALVE DISCHARGE PORT | 1 | |
| AS5230-2020 | UNION - FITTING 1 1/4 INCH | 1 | |
| AS5230J0505A | UNION - FITTING, 5/16 INCH | 1 | |
| ASNA3752-080606 | UNION TEE | 1 | |
| B27011-71 | TRUNUNION ASSEMBLY T | 6 | |
| B32003-1 | PIN PULLER - TRUNION NLG (ASSY) | 12 | |
| B32018-1 | ALIGNMENT PIN- TRUNION LINK MLG | 9 | |
| B32027-1 | SOCKET SET TRUNION BEARING RETENTION NUT MLG (ASSY) | 8 | |
| B32029-1 | TRUNION LINK SUPPORT ASSY - NLG (ASSY) | 6 | |
| B32044-13 | TRUNION PIN PULLER | 2 | |
| C.36001-18 | UNION ADAPTER AN4/MS4 | 3 | |
| C32003-1 | Removal Equipment, Min Landing Gear Trunion Link Pin | 7 | |
| C32003-16 | Removal Equipment, Min Landing Gear Trunion Link Pin | 1 | |
| C32003-24 | Removal Equipment, Min Landing Gear Trunion Link Pin | 1 | |
| C32007-1 | Mandrel - Main Landing Gear Forward Trunion Bearing | 3 | |
| C32013-15 | WRENCH ADAPTOR - RETAINING NUT, AFT BEARING TRUNION MLG | 8 | |
| C32013-16 | WRENCH ADAPTOR - RETAINING NUT, AFT BEARING TRUNION MLG | 4 | |
| C32013-9 | WRENCH ADAPTOR - RETAINING NUT, AFT BEARING TRUNION MLG | 4 | |
| C32015-1 | MLG FWD TRUNION SUPPORT FUSE PIN PULLER | 14 | |
| C32023-12 | MLG TRUNION SPHERICAL BEARING WRENCH | 11 | |
| C32023-14 | WRENCH, TRUNION BEARING | 1 | |
| C32023-2 | Wrench Trunion Spherical Bearing | 1 | |
| C32031-1 | R/I EQPT-AFT TRUNION PIN, MLG | 18 | |
| C32031-22 | EQUIP TRUNION MLG | 11 | |
| C32033-1 | NLG TRUNION PIN RI EQUIPMENT | 19 | |
| C32033-5 | DRAG STRUT TRUNION PIN PULLER ASSY | 6 | |
| C32033-6 | NLG GEAR TRUNION PIN PULLER ASSY | 5 | |
| C32054-1 | EQUIP TRUNION PIN NL | 8 | |
| C35001-12 | Union Bonnet Valve | 1 | |
| C36001-17 | SWIVEL NUT UNION | 6 | |
| C36001-18 | UNION ADAPTER AN4/MS4 | 3 | |
| C36001-19 | UNION MS4 (PART OF C36001-51 & -63) | 6 | |
| C36001-20 | UNION MS5 (SUBCOMPONENT OF C36001-63) | 5 | |
| C36001-21 | UNION MS6 (BELONGS TO TOOLS C36001-63) | 6 | |
| C36001-67 | UNION MS4/MS6 (BELONGS TO TOOL C36001-63) | 1 | |
| CJMDX32-004 | TRUNION BEARING REMOVAL TOOL - MLG | 2 | |
| CP30379 | Trunion Mount Build Stand | 1 | |
| CP30502 | Trunion Mount Build Stand | 1 | |
| F26833000 | KIT OF UNION TO SHUNT HYDRAULIC HOSES | 1 | |
| F72959-4 | NOSE LANDING GEAR TRUNION PIN RETENER NUT | 7 | |
| F72959-40 | NOSE LANDING GEAR TRUNION PIN RETENER NUT | 23 | |
| F80018-1 | MLG FWD trunion bearing | 17 | |
| F80020-5 | SPANNER TRUNION PIN B737 | 16 | |
| F80096-4 | HOLDING FIXURE FWD TRUNION | 10 | |
| F80096-7 | HOLDING FIXURE FWD TRUNION | 6 | |
| F80158-1 | NLG TRUNION BEARING PULLER SET | 5 | |
| F80158-17 | TRUNION PIN AND BEARING PULLER SET | 20 | |
| F80176-1 | TRUNION AFT BEARING | 5 | |
| F80176-8 | TORQUE WRENCH ADPT MLG TRUNION AFT BEARING | 16 | |
| FHR112 | UNION REMOVAL TOOL | 1 | |
| G32047-1 | SLING WING GEAR TRUNION FORK | 4 | |
| G32066-1 | TRUNION BOLT TORQUE | 3 | |
| GA47340-260 | 5 CONNECTIONS MS-6/MS-6 (THREE UNION) | 3 | |
| GS47445 | NATO / AN4 UNION | 1 | |
| GSAF1F | 3/8" UNION/ADAPTER | 4 | |
| HE50844Z53 | TAP UNION KEY | 1 | |
| HLA4302-06 | UNION NATO MALE / 9/16-18UNF MALE | 1 | |
| HLA8891-SM08 | NARTO MALE - M14X1.5 MALE UNION | 1 | |
| HLA9918-OE | UNION –NATO MALE/ 9/16-18 UNF-3B FEMALE WITHOUT VALVE CORE | 1 | |
| HQD-010-HA | UNIONS/COUPLING FOR THE RAT TEST TOOL (MEASUREMENTS RETURN HOSE 33MM AND PRESSURE HOSE 31MM) | 3 | |
| HU21435/1 | BAR - REACTOR, FUEL MANIFOLD UNION NUT | 1 | |
| HU25937 | BAR - REACTOR, FUEL MANIFOLD UNION NUT | 1 | |
| HU40371 | THIMBLE FIT O RING TO UNION MS21916- | 3 | |
| HU40372 | THIMBLE FIT O RING TO UNION MS21902- | 3 | |
| HU40373 | THIMBLE FIT O RING TO UNION MS21902- | 3 | |
| IAE1J12008 | Trunion | 9 | |
| IAE1P17045 | SPANNER - NUT UNION V2500 | 6 | |
| IAE1R18245 | ADAPTOR, UNION | 1 | |
| J21998 | Set Of Unions | 1 | |
| J26009-23 | Union tee | 1 | |
| J32004-1 | PULLER - TRUNION PIN, NLG | 5 | |
| J32004-21 | PULLER - TRUNION PIN, NLG | 11 | |
| J32004-22 | PULLER - TRUNION PIN, NLG | 9 | |
| J32005-1 | PULLER EQPT - TRUNION NLG | 6 | |
| J32036-27 | EQUIPMENT - REMOVAL/INSTALLATION, MLG AFT TRUNION PIN | 8 | |
| J32038-42 | PULLER - FUSE PIN, MLG FWD TRUNION SUPPORT | 7 | |
| J32042-14 | WRENCH - SPANNER, MLG AFT TRUNION BEARING (INCLUDED IN J32042-89 KIT) | 3 | |
| J32103-1 | Fuse pin removal/installation equipment-main landing gear forward trunion housing | 1 | |
| JMP/STD/A/5364/1 | SIGHT GLASS UNION (TOP) | 1 | |
| JMP/STD/A/5364/2 | SIGHT GLASS UNION (BOTTOM) | 1 | |
| L50001T04 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| L50001T06 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| L50001T08 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| L51001T04 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-MALE) | 1 | |
| L51021T04 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-FEMALE) | 1 | |
| M21830 | Set Of Unions | 1 | |
| MIT115A5002 | 737 NG TRUNION BUSHING REPAIR TOOL | 7 | |
| MS21902-12 | AD-LG SELECTOR VALVES INSPECTION UNION | 5 | |
| MS21902-16 | STRAIGHT UNIONS | 1 | |
| MS21902-20 | STRAIGHT UNIONS | 1 | |
| MS21902-3 | STRAIGHT UNIONS | 1 | |
| MS21902D6 | UNION FITTING | 1 | |
| MS21902D8 | UNION: FLARELESS TUB | 1 | |
| MS21902J4 | UNION, FLARELESS TUBE | 8 | |
| MS21902J5 | UNION - FITTING, 5/16 INCH | 1 | |
| MS21902V12P | UNION WITH SEAL | 1 | |
| MS21902W6 | ALUMINIUM FLARELESS TUBE UNION | 6 | |
| MS21916V12-4P | UNION ASSY FOR PNEUMATIC CONNECTION 11/4 ( AIRCRAFT END SIZE) TO 9/16 (BOTTLE END SIZE) | 1 | |
| MS21924-4 | STRAIGHT UNIONS | 1 | |
| MS9193-04 | NIPPLE UNION TUBE | 11 | |
| N-2011-12-S | UNION 24 OF THE A350 MULE TRONAIR | 2 | |
| N2464-05SV | UNION: STR THREAD #6, | 1 | |
| NATO 14V164SK | RACCORD ORIENTABLE CASTERING UNION | 1 | |
| NDT 636 | REF STD 1, B767 MLG AFT TRUNION INSP KIT | 2 | |
| NDT 637 | REF STD 2, B767 MLG AFT TRUNION INSP KIT | 1 | |
| NSA855011-12D | UNION - STRAIGHT, BULKHEAD CONNECTION | 1 | |
| NSA855011-12E | UNION - STRAIGHT, BULKHEAD CONNECTION | 1 | |
| PE20001-04 | UNION CONNECTOR | 1 | |
| PE20001-05 | UNION CONNECTOR | 1 | |
| PE20001-06 | UNION CONNECTOR | 1 | |
| PE20001-08 | UNION CONNECTOR | 1 | |
| PE20001-10 | UNION CONNECTOR | 1 | |
| PE20209D12 | UNION - STRAIGHT, BULKHEAD CONNECTION | 1 | |
| PHG72B | U-JOINT TRUNION DRIVER | 1 | |
| PHG72B1 | U-JOINT TRUNION DRIVER | 1 | |
| PM82215 | KIT TRUNION PIN REMOVAL PULLER | 1 | |
| PWC52665 | TRUNION | 1 | |
| PWC86440 | LH TRUNION ASSEMBLY | 1 | |
| R50001T04 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R50001T10 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R50001T12 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R50001T16 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R50001T20 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R80101T04 | UNION - PERM. TO PERM. | 8 | |
| R80101T05 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT)（REPAIR SYSTEM） | 4 | |
| R80101T06 | RYNGLOK STRAIGHT UNION (SIZE 06) | 10 | |
| R80101T08 | UNION - PERM. TO PERM. | 7 | |
| R80101T10 | UNION - PERM. TO PERM. | 7 | |
| R80101T12 | RYNGLOK STRAIGHT UNION (SIZE 12) | 9 | |
| R80101T16 | UNION STRAIGHT FITTI | 5 | |
| R80101T20 | RYNGLOK STRAIGHT UNION (SIZE 20) | 3 | |
| R80101T24 | RYNGLOK STRAIGHT UNION (SIZE 24) | 3 | |
| R81101T04 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-FEMALE)（REPAIR SYSTEM） | 1 | |
| R81101T05 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-FEMALE)（REPAIR SYSTEM） | 1 | |
| R81121T04 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-MALE)（REPAIR SYSTEM） | 1 | |
| R81121T05 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-MALE)（REPAIR SYSTEM） | 1 | |
| RA0001D16 | LOW PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| RA0001D20 | LOW PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| RC331931P22 | J6T UNION TEE SS FITTING | 1 | |
| RF08LPD | UNION REMOVAL TOOL, DASH 08 | 1 | |
| RF12LPDE | UNION REMOVAL TOOL, DASH 12 | 2 | |
| RRT061786 | PIG TAIL UNION TORQUE SPANNERS | 1 | |
| RRT061786-3 | PIG TAIL UNION TORQUE SPANNERS | 1 | |
| RRT061786-4 | PIG TAIL UNION TORQUE SPANNERS | 1 | |
| RRT061786-5 | PIG TAIL UNION TORQUE SPANNERS | 1 | |
| RRT102591 | PIG TAIL UNION TORQUE SPANNERS | 1 | |
| S7301202120000 | UNION T MACHINED | 1 | |
| SK20978-1006 | UNION FOR TESTING | 1 | |
| ST2580-202 | WRENCH-MAIN GEAR TRUNION LINK SOCKET | 16 | |
| ST78-3001 | LLAVE TORNILLOS DE UNIÓN A MOTOR ( PUESTA EN MARCHA ) | 1 | |
| T900175-1 | TRUNION WRENCH | 2 | |
| TER57879 | Trunion Pin | 1 | |
| TER90071 | Trunion Wrench (Detail 01) | 1 | |
| TM0520G001 | TEST UNION | 2 | |
| TM1743G002 | JET HOLDER UNION | 1 | |
| TM2390G001 | UNION ADAPTOR | 2 | |
| TM6333G001 | UNION, ADAPTOR | 2 | |
| TMH MD05-00-01 | INPUT UNION | 1 | |
| TMH MD05-00-02 | OUTPUT UNION | 1 | |
| f 80018-1 | MLG FWD trunion bearing | 17 | |
| 98A26213501000 | WRENCH,UNION NUT,SPECIAL | 8 | |
| 98A26213502000 | WRENCH UNION NUT,SPECIAL | 7 | |
| 98A29113501000 | WRENCH,UNION NUT,SPECIAL | 8 | |
| 98A29113502000 | WRENCH,UNION NUT,SPECIAL | 7 | |
| 98A29113503000 | WRENCH,UNION NUT,SPECIAL | 6 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
