| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 69-77368-1 | T CHORD | 1 | |
| 69-77368U1 | T CHORD | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98S53005016000 | FRAME 25 AND 27 INNER CHORD AT STR10 | 1 | |
| 1017815 | TAP TEST KIT - WIDE CHORD FAN BLADE INSPECTION | 1 | |
| 18395G-01 | CHORD ASSY ADAPTER C5401 | 1 | |
| 41035G-02 | 41035G-02 INTERFACE CHORD | 4 | |
| 57A3055TC | WING - LOWER CHORD OF THE REAR SPAR - HORIZONTAL FLANGE BETWEEN THE SIDE-OFBODY | 1 | |
| 65-87995 | ANGLE - STRUT CHORD SIDE ENGINE | 1 | |
| 65C37277-21 | STA 727 FRAME AND S-18A CHORD PREVENTIVE MODIFICATION COMBINATION | 1 | |
| 65C37277-22 | STA 727 FRAME AND S-18A CHORD PREVENTIVE MODIFICATION COMBINATION | 1 | |
| 65C37547-23 | SPLICE, OUTER CHORD, FWD | 1 | |
| 65C37547-33 | SPLICE, OUTER CHORD, AFT | 1 | |
| 65C37547-34 | FILLER, CHORD, AFT | 1 | |
| 65C37547-35 | AFT CHORD REPAIR FILLER | 1 | |
| 65C37547-36 | SPLICE, INNER CHORD, AFT | 1 | |
| 65C38494-1 | BULKHEAD OUTBD CHORD | 1 | |
| 675W0003-22 | BRACKET - RING CHORD | 1 | |
| 856A1275G02 | GAUGE, BLADE TIP CHORD LENGTH | 1 | |
| 856A1275G04 | BLADE TIP CHORD LENG | 6 | |
| 856A1809G01 | GAGE, CHORD LENGTH-COMPR ROTOR | 5 | |
| 856A1814 | GAGE,CHORD THICK HPCR BLD | 1 | |
| 856A1814G01 | GAGE,CHORD THICK HPCR BLD | 8 | |
| 856A4192G01 | GAGE, MID-CHORD LENGTH | 2 | |
| 98A25207503102 | ADAPTER PULLEY CEILING CHORD | 6 | |
| 98A25207503103 | ADAPTER PULLEY CEILING CHORD | 9 | |
| 98S53005016000 | FRAME 25 AND 27 INNER CHORD AT STR.10 | 3 | |
| 98S53805002-000 | ATR REFERENCE STANDARD 53-61-18 PT 6 FIGURE 603 PAGE 609. INSPECTION OF REAR PRESSURE BULKHEAD PERIPHERY OF DOME SKIN AND CONNECTION WITH VERTICAL FLANGE OF DOME VERTICLAL CHORD. Includes Test Report traceable to NIST and Certificate of Conformance. | 6 | |
| AFS-1302 | CUSTOM LOW PROFILE 7.5MHz ANGLE BEAM TRANSDUCER WITH HANDLE. USED TO INSPECT THE CHORD DOUBLER AT THE HINGE BEAM TO LATCH BEAM END FOR THE B777 AIRCRAFT. | 1 | |
| AFS-766-3 | CUSTOM 5MHz ANGLE BEAM TRANSDUCER .25" x .25" ELEMENT. USED WITH NDT766 Outboard Flange of the T-Chord/Upper Surface. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-766/767-4 | CUSTOM 5MHz ANGLE BEAM TRANSDUCER .25" x .25" ELEMENT. USED WITH NDT766 Outboard Flange of the T-Chord/Lower Surface. Includes Test Report and Certificate of Conformance.REFERENCE: 777 PART 4 57-10-02 | 1 | |
| AFS-767-3 | CUSTOM 5MHz ANGLE BEAM TRANSDUCER .25" x .25" ELEMENT. USED WITH NDT766 Inboard Flange of the T-Chord/Upper Surface. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-767-5 | CUSTOM 5MHz ANGLE BEAM TRANSDUCER .25" x .25" ELEMENT. USED WITH NDT766 Inboard Flange of the T-Chord/Lower Surface. Includes Test Report and Certificate of Conformance. | 1 | |
| DCW210P1 | CHORDLESS ORBITAL SANDER DEWALT KIT | 1 | |
| DJ4-5203-3822 | HORIZONTAL STAB DRILL JIG HOLE TRANSFER RS LWR CHORD SHEAR FITTING (RH) | 1 | |
| EP326-16S-50 | LIGHT - WORK, 26 WATTS, EXPLOSION PROOF (*SAFETY*) OPERATES ON 120/VAC, 60 HZ, CHORD LENGTH: 50 FEET; OPTIONS AVAILABLE: 220 VAC 50 HZ P/N EP326-25S-50, 220 VAC 60 HZ P/N , EP326-26S-50. | 2 | |
| F71336-501 | STABILIZERS - HORIZONTAL STABILIZER - REAR SPAR UPPER CHORD INSPECTION | 29 | |
| IAE3R19320 | TEMPLATE, CHORD | 2 | |
| NDT 398 | O/B CHORD @ BS 727, STR 18A, PT 4, 53-10 | 2 | |
| NDT 628 | REF STD, INNER CHORD INSP @ BS 955 BLKD | 3 | |
| NDT 642 | REF STD, BLKD CHORD @ BS 1065, PT 4, | 2 | |
| NDT 643 | REF STD, LWR CHORD @ R/SPAR, WS 213.5 | 5 | |
| NDT 644 | REF STD, WING LWR CHORD R/SPAR RIB 10 | 4 | |
| NDT 660 | REF STD, SECTION 48, BS 1809 OUTER CHORD | 4 | |
| NDT 665 | REF STD, MID CHORD OF BS 246 FLOOR BEAM | 2 | |
| NDT 666A | REF STD, LWR WING SKIN & CHORD OF F/SPAR | 2 | |
| NDT 666B | REF STD, LWR WING SKIN & CHORD OF F/SPAR | 2 | |
| NDT 666C | REF STD, LWR WING SKIN & CHORD OF F/SPAR | 2 | |
| NDT644 | WING - LOWER CHORD OF THE REAR SPAR - HORIZONTAL FLANGE BETWEEN THE SIDE-OFBODY | 4 | |
| NDT731 | INTERNAL - SPECIAL DETAILED: REAR SPAR SIDE FITTING INNER CHORD SPLICE INSPECT (UT) | 3 | |
| PWA 47209 | GAGE CHORD WIDTH VANE HPC FIFTH STG. | 1 | |
| PWA 85670-1 | TEMPLATE MARKING HPC INLET CHORDAL WHITE | 1 | |
| PWA 85670-2 | TEMPLATE MARKING HPC FIFTH STG. CHORDAL | 1 | |
| PWA 85670-3 | TEMPLATE MARKING HPC SIXTH STG. CHORDAL | 1 | |
| PWA 85670-4 | TEMPLATE MARKING HPC SEVENTH STG. CHORDAL | 1 | |
| PWA25096 | 12 STG CHORD GAGE | 2 | |
| PWA28222 | GAGE, NO GO - HPC 5TH STAGE CHORD WIDTH_[PWA28222] | 1 | |
| PWA28223 | GAGE, NO GO - HPC 6TH STAGE CHORD WIDTH_[PWA28223] | 1 | |
| PWA28224 | GAGE, NO GO - BLADE, HPC 7TH STG CHORD_[PWA28224] | 1 | |
| PWA28225 | GAGE, NO GO - HPC 8TH STAGE CHORD WIDTH_[PWA28225] | 1 | |
| PWA28226 | GAGE, NO GO - HPC 9TH STAGE CHORD WIDTH_[PWA28226] | 1 | |
| PWA28227 | GAGE, NO GO - HPC 10TH STAGE CHORD WIDTH_[PWA28227] | 1 | |
| PWA28228 | GAGE, NO GO - HPC 11TH STG CHORD WIDTH_[PWA28228] | 1 | |
| PWA28229 | GAGE, NO GO - HPC 12TH STAGE CHORD WIDTH_[PWA28229] | 1 | |
| PWA28230 | GAGE,NO GO - HPC 13TH STG CHORD WIDTH_[PWA28230] | 1 | |
| PWA28231 | GAGE, NO GO - HPC 14TH STAGE CHORD WIDTH_[PWA28231] | 1 | |
| PWA28232 | GAGE, NO GO - HPC 15TH STAGE CHORD WIDTH_[PWA28232] | 1 | |
| PWA49065 | TEMPLATE - PLASTIC CHORD, (PN 53A321, 54A821 AND 56A511 BLADE) | 1 | |
| PWC34910-800 | GAGE, CHORD LENGTH-COMPR ROTORBLADE (3D AERO) | 10 | |
| PWC70335 | Chord lenght Tool | 4 | |
| RYOBI P411 | CHORDLESS ORBITAL SANDER | 1 | |
| TEK-3038 | Special Hole Probe, 25KHz, Counterbore Interface Centered Coil, For 737 Strut Lower Chord Standard | 1 | |
| UH60-110 | HORIZONTAL STABILIZER COVERS (specify stabilator shape & chord) (set of 2) | 1 | |
| UH60-120 | HORIZONTAL STABILIZER TIP PADS & CENTER SECTION PAD (specify stabilator shape & chord) (set of 3) | 1 | |
| UT2000 | ALTERNATIVE TAP TEST KIT - WIDE CHORD FAN BLADE INSPECTION | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
