| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0880000-3 | STANDARD | 2 | |
| 0880000-4 | STANDARD | 2 | |
| 0880000-5 | STANDARD | 2 | |
| 126 | STANDARD | 7 | |
| 1002 | STANDARD | 4 | |
| 1004 | STANDARD | 6 | |
| 10003114 | Standard | 1 | |
| 10003115 | Standard | 1 | |
| 10540001-3 | STANDARD | 1 | |
| 10540001-5 | STANDARD | 1 | |
| 10540001-7 | STANDARD | 1 | |
| 10RS.26.1BM | STANDARD | 1 | |
| 145-31661-401ABS-150 | STANDARD | 1 | |
| 145-34230-403 | STANDARD | 1 | |
| 145-34230-405 | STANDARD | 1 | |
| 145-34230-407 | STANDARD | 1 | |
| 145-34231-401 | STANDARD | 1 | |
| 145-34231-403 | STANDARD | 1 | |
| 145-34231-405 | STANDARD | 1 | |
| 145-34231-407 | STANDARD | 1 | |
| 145-44131-001 | STANDARD | 6 | |
| 185 | STANDARD | 2 | |
| 186A | STANDARD | 3 | |
| 186B | STANDARD | 3 | |
| 186C | STANDARD | 4 | |
| 186D | STANDARD | 4 | |
| 186E | STANDARD | 4 | |
| 186F | STANDARD | 3 | |
| 188A | STANDARD | 5 | |
| 189 | STANDARD | 7 | |
| 2683301-1 | STANDARD | 4 | |
| 369 | STANDARD | 2 | |
| 53-20-104/1 | STANDARD | 1 | |
| 5683101-2 | STANDARD | 2 | |
| 7947479-10 | STANDARD | 3 | |
| 833081-1 | STANDARD | 1 | |
| 98F29003000000 | STANDARD | 15 | |
| 98S51605000206 | STANDARD | 1 | |
| 98S51605001-200 | STANDARD | 4 | |
| 98S57105012-200 | STANDARD | 3 | |
| 99A51107299001 | STANDARD | 5 | |
| 99A55400729000 | STANDARD | 1 | |
| 99D51407291001 | STANDARD | 7 | |
| 99D52809004000 | STANDARD | 7 | |
| 99D57103002001 | STANDARD | 5 | |
| 99D57103013000 | STANDARD | 6 | |
| 99D57103015000 | STANDARD | 4 | |
| 99D57103016000 | STANDARD | 7 | |
| 99F54503000000 | STANDARD | 2 | |
| 99F54503002000 | Standard | 1 | |
| 9A53107261000 | STANDARD | 1 | |
| A607 | STANDARD | 4 | |
| A607A | STANDARD | 3 | |
| AFNDT-3180 | STANDARD | 1 | |
| AGE-04900-401 | STANDARD | 4 | |
| ANDT1015 | STANDARD | 3 | |
| ANDT1049 | STANDARD | 3 | |
| ANDT1050 | STANDARD | 3 | |
| ANDT1055 | STANDARD | 3 | |
| ANDT1056 | STANDARD | 4 | |
| ANDT1057 | STANDARD | 3 | |
| ANDT1079 | STANDARD | 4 | |
| ANDT4126 | STANDARD | 2 | |
| BAC 5578MANUFACTURE OF ADVANCED COMPOSITE PRIMARY STRUCTURE | STANDARD | 1 | |
| CA900-4 | STANDARD | 1 | |
| EN462-2 H1 IQI FE | STANDARD | 1 | |
| IIW-01AL | STANDARD | 1 | |
| IIW1.IA | STANDARD | 1 | |
| MAB-AL | STANDARD | 1 | |
| NDT 6004 | STANDARD | 2 | |
| NDT 6005 | STANDARD | 2 | |
| NDT 6006 | STANDARD | 2 | |
| NDT 6007 | STANDARD | 2 | |
| NDT 6008 | STANDARD | 2 | |
| NDT 689 | STANDARD | 3 | |
| NDT 714 | STANDARD | 2 | |
| NDT 731 | STANDARD | 3 | |
| NDT-797 | STANDARD | 3 | |
| NDT001 | Standard | 1 | |
| NDT1002 | STANDARD | 1 | |
| NDT1016 | STANDARD | 3 | |
| NDT1017 | STANDARD | 2 | |
| NDT1018 | STANDARD | 3 | |
| NDT1019 | STANDARD | 3 | |
| NDT1020 | STANDARD | 2 | |
| NDT1021 | STANDARD | 2 | |
| NDT1022 | STANDARD | 3 | |
| NDT1023 | STANDARD | 2 | |
| NDT1024 | STANDARD | 2 | |
| NDT1025 | STANDARD | 2 | |
| NDT1026 | STANDARD | 2 | |
| NDT1027 | STANDARD | 2 | |
| NDT104 | STANDARD | 1 | |
| NDT1040 | STANDARD | 2 | |
| NDT1048 | STANDARD | 4 | |
| NDT1049 | STANDARD | 1 | |
| NDT1062 | STANDARD | 2 | |
| NDT1072 | STANDARD | 2 | |
| NDT1074 | STANDARD | 2 | |
| NDT1075 | STANDARD | 2 | |
| NDT1084 | STANDARD | 1 | |
| NDT1085-032 | STANDARD | 3 | |
| NDT1085-036 | STANDARD | 3 | |
| NDT1085-050 | STANDARD | 2 | |
| NDT1085-071 | STANDARD | 2 | |
| NDT1085-080 | STANDARD | 2 | |
| NDT1085-090 | STANDARD | 2 | |
| NDT1085-100 | STANDARD | 2 | |
| NDT1085-112 | STANDARD | 2 | |
| NDT1085-125 | STANDARD | 2 | |
| NDT1087-1 | STANDARD | 4 | |
| NDT1087-6 | STANDARD | 2 | |
| NDT1087-9 | STANDARD | 2 | |
| NDT1087-X | STANDARD | 1 | |
| NDT126 | STANDARD | 1 | |
| NDT3074 | STANDARD | 1 | |
| NDT3077 | STANDARD | 2 | |
| NDT3109 | STANDARD | 2 | |
| NDT3116 | STANDARD | 2 | |
| NDT3133 | STANDARD | 2 | |
| NDT3139 | STANDARD | 2 | |
| NDT3142 | STANDARD | 2 | |
| NDT3149 | STANDARD | 2 | |
| NDT3204 | STANDARD | 2 | |
| NDT3226 | STANDARD | 2 | |
| NDT3226A | STANDARD | 2 | |
| NDT3231 | STANDARD | 2 | |
| NDT3244 | STANDARD | 2 | |
| NDT3279 | STANDARD | 1 | |
| NDT3280 | STANDARD | 1 | |
| NDT3282 | STANDARD | 3 | |
| NDT3310-A | STANDARD | 1 | |
| NDT3310-B | STANDARD | 1 | |
| NDT3310-C | STANDARD | 1 | |
| NDT3313A | STANDARD | 1 | |
| NDT3317 | STANDARD | 1 | |
| NDT3318 | STANDARD | 1 | |
| NDT396 | STANDARD | 6 | |
| NDT396-1 | STANDARD | 1 | |
| NDT398 | STANDARD | 2 | |
| NDT5089 | STANDARD | 1 | |
| NDT6000A | STANDARD | 2 | |
| NDT6000B | STANDARD | 2 | |
| NDT6000C | STANDARD | 2 | |
| NDT6000D | STANDARD | 2 | |
| NDT6000E | STANDARD | 2 | |
| NDT6000EC | STANDARD | 2 | |
| NDT6001 | STANDARD | 2 | |
| NDT6002 | STANDARD | 2 | |
| NDT6009 | STANDARD | 2 | |
| NDT6010 | STANDARD | 1 | |
| NDT6011 | STANDARD | 2 | |
| NDT6014 | STANDARD | 2 | |
| NDT6015 | STANDARD | 2 | |
| NDT6016 | STANDARD | 2 | |
| NDT6017 | STANDARD | 2 | |
| NDT6018 | STANDARD | 2 | |
| NDT6019 | STANDARD | 2 | |
| NDT6020 | STANDARD | 2 | |
| NDT6021 | STANDARD | 2 | |
| NDT6022 | STANDARD | 2 | |
| NDT6023 | STANDARD | 2 | |
| NDT6024 | STANDARD | 2 | |
| NDT6025-1 | STANDARD | 1 | |
| NDT6025-2 | STANDARD | 1 | |
| NDT6025-3 | STANDARD | 1 | |
| NDT6025-4 | STANDARD | 1 | |
| NDT6025-5 | STANDARD | 2 | |
| NDT6025-6 | STANDARD | 2 | |
| NDT6027 | STANDARD | 3 | |
| NDT6028 | STANDARD | 3 | |
| NDT6029 | STANDARD | 3 | |
| NDT6030 | STANDARD | 3 | |
| NDT6031-1 | STANDARD | 2 | |
| NDT6031-2 | STANDARD | 2 | |
| NDT6031-3 | STANDARD | 2 | |
| NDT6031-4 | STANDARD | 2 | |
| NDT6032-1 | STANDARD | 2 | |
| NDT6032-2 | STANDARD | 2 | |
| NDT6032-3 | STANDARD | 2 | |
| NDT6032-4 | STANDARD | 2 | |
| NDT6033-1 | STANDARD | 3 | |
| NDT6033-2 | STANDARD | 2 | |
| NDT6038 | STANDARD | 3 | |
| NDT6041 | STANDARD | 3 | |
| NDT6049 | STANDARD | 3 | |
| NDT6050 | STANDARD | 3 | |
| NDT6051 | STANDARD | 3 | |
| NDT6058 | STANDARD | 3 | |
| NDT6059 | STANDARD | 3 | |
| NDT6060 | STANDARD | 3 | |
| NDT6061 | STANDARD | 3 | |
| NDT6063 | STANDARD | 3 | |
| NDT6099 | STANDARD | 2 | |
| NDT614 | STANDARD | 3 | |
| NDT617 | STANDARD | 3 | |
| NDT618 | STANDARD | 2 | |
| NDT618A | STANDARD | 3 | |
| NDT619 | STANDARD | 3 | |
| NDT620 | STANDARD | 2 | |
| NDT621 | STANDARD | 4 | |
| NDT622 | STANDARD | 4 | |
| NDT623 | STANDARD | 3 | |
| NDT624 | STANDARD | 2 | |
| NDT628 | STANDARD | 3 | |
| NDT630 | STANDARD | 3 | |
| NDT642 | STANDARD | 2 | |
| NDT643 | STANDARD | 5 | |
| NDT644 | STANDARD | 4 | |
| NDT648 | STANDARD | 3 | |
| NDT652 | STANDARD | 4 | |
| NDT658 | STANDARD | 2 | |
| NDT660 | STANDARD | 4 | |
| NDT662 | STANDARD | 3 | |
| NDT663A | STANDARD | 3 | |
| NDT663B | STANDARD | 3 | |
| NDT664 | STANDARD | 3 | |
| NDT664A | STANDARD | 2 | |
| NDT664B | STANDARD | 1 | |
| NDT664C | STANDARD | 1 | |
| NDT665B | STANDARD | 1 | |
| NDT666A | STANDARD | 2 | |
| NDT666B | STANDARD | 2 | |
| NDT666C | STANDARD | 2 | |
| NDT667 | STANDARD | 4 | |
| NDT671 | STANDARD | 2 | |
| NDT674 | STANDARD | 3 | |
| NDT675 | STANDARD | 3 | |
| NDT682 | STANDARD | 4 | |
| NDT684 | STANDARD | 3 | |
| NDT685 | STANDARD | 3 | |
| NDT686 | STANDARD | 3 | |
| NDT688 | STANDARD | 3 | |
| NDT690 | STANDARD | 3 | |
| NDT691 | STANDARD | 3 | |
| NDT693 | STANDARD | 3 | |
| NDT694 | STANDARD | 3 | |
| NDT695 | STANDARD | 3 | |
| NDT697 | STANDARD | 3 | |
| NDT698 | STANDARD | 3 | |
| NDT710 | STANDARD | 2 | |
| NDT711 | STANDARD | 2 | |
| NDT725 | STANDARD | 2 | |
| NDT728 | STANDARD | 2 | |
| NDT729 | STANDARD | 1 | |
| NDT730 | STANDARD | 1 | |
| NDT731 | STANDARD | 3 | |
| NDT732A | STANDARD | 2 | |
| NDT733 | STANDARD | 2 | |
| NDT735 | STANDARD | 2 | |
| NDT736 | STANDARD | 1 | |
| NDT737 | STANDARD | 2 | |
| NDT738 | STANDARD | 2 | |
| NDT739 | STANDARD | 2 | |
| NDT740 | STANDARD | 2 | |
| NDT741 | STANDARD | 2 | |
| NDT745 | STANDARD | 2 | |
| NDT746 | STANDARD | 2 | |
| NDT757 | STANDARD | 1 | |
| NDT760 | STANDARD | 2 | |
| NDT761 | STANDARD | 2 | |
| NDT766 | STANDARD | 2 | |
| NDT767 | STANDARD | 2 | |
| NDT768 | STANDARD | 2 | |
| NDT769 | STANDARD | 2 | |
| NDT776 | STANDARD | 2 | |
| PWA104625 | STANDARD | 1 | |
| PWA28403B | STANDARD | 1 | |
| SK601R-10040-1 | STANDARD | 4 | |
| ST4340 | STANDARD | 5 | |
| UT-2370 | STANDARD | 1 | |
| WS-C130M | STANDARD | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| $32 | Hamilton Standard Gun Assembly (Hair Pin Filament) | 3 | |
| (CALIB) 2591553-901 | CALIBRATION SET - STANDARD (CALIBRATION) | 1 | |
| (CALIB) 6283102-1 | CESSNA STANDARD (CALIBRATION) | 1 | |
| (CALIB) 80350A | Standard Peak Power Sensor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 901-14990 | BALANCER/ANALYZER W/ STANDARD ACCESSORIE (CALIBRATION) | 1 | |
| (CALIB) 9339A1 | CALIBRAT CALIBRATION STANDARD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 954-2399 | STANDARD COMPASS FOR COMPASS SWING CALIBRATION (CALIBRATION) | 1 | |
| (CALIB) 98F29003000000 | WRENCHES WRENCHES-STANDARD TORQUE SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L29003002000 | TOOLSET TOOL SET,STANDARD TORQUE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S53005012000 | STANDARD D'ETALONNAGE DU JOINT | 1 | |
| (CALIB) 98S53005013000 | STANDARD D'ETALONNAGE DU JOINT | 1 | |
| (CALIB) 98S53005021000 | STANDARD NDT | 1 | |
| (CALIB) 98S53005024000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53005025000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53005027000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53005028000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53005029000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53005030000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53005031000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53005032000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53005033000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53305002200 | CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53305004000 | SKIN STRINGER CALIBRATION STANDARD-9635A3 | 1 | |
| (CALIB) 98S53305005000 | SKIN STRINGER CALIBRATION STANDARD-9635A4 | 1 | |
| (CALIB) 98S53805002000 | CALIBRATION STANDARD | 1 | |
| (CALIB) 98S54305001202 | CALIBRATION REFERENCE STANDARD | 1 | |
| (CALIB) 98S54305002200 | CALIBRATION STANDARD | 1 | |
| (CALIB) 98S55305011000 | CALIBRATION STANDARD FOR VTP FITTINGS INSPECTION | 1 | |
| (CALIB) 98S57105005200 | CALIBRATION STANDARD | 1 | |
| (CALIB) 98S57105006200 | CALIBRE STANDARD NDT | 1 | |
| (CALIB) 98S57105009200 | CALIBRE STANDARD NDT | 1 | |
| (CALIB) 98S57105015200 | CALIBRE STANDARD NDT-9941A3 | 1 | |
| (CALIB) 98S57105019200 | CALIBRATION STANDARD FOR NTM 57 14 01 | 1 | |
| (CALIB) 98S57105030200 | CALIBRATION STANDARD | 1 | |
| (CALIB) 98S57105031200 | CALIBRATION STANDARD FOR SSI 57-12-12 | 1 | |
| (CALIB) 98S57105033200 | CALIBRATION STANDARD | 1 | |
| (CALIB) 98S57105034200 | CALIBRE STANDARD POUR SSI-57-12-12 | 1 | |
| (CALIB) 98S57205030000 | CARBON CALIBRATION STANDARD | 1 | |
| (CALIB) 99A51107299001 | STANDARD, REFERENCE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A53307274000 | Standard Calibration (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A55307306000 | STANDARD, CALIBRATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A55407291000 | FUNCTION TEST STANDARD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A5540729100010 | FUNCTION TEST STANDARD (CALIBRATION) | 1 | |
| (CALIB) 99A57204436000 | STANDARD STANDARD, REFERENCE - INCLUDING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A57504296000 | REFERENCE STANDARD (CALIBRATION) | 2 | |
| (CALIB) 99D51107295000 | STANDARD STANDARD, CALIBRATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D51407291001 | STANDARD SET, CALIBRATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D54403001002 | REFERENCE STANDARD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F53113002000 | AIRBUS CALIBRATION STANDARD A330-200/300 53-11-55 PAGE 28 FIGURE 53-11-55-013-A. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. (CALIBRATION) | 1 | |
| (CALIB) 99F53303097000 | STANDARD, CALIBRATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C12-PCS-3C1N | REFERENCE STANDARD COMPOSITE (CALIBRATION) | 1 | |
| (CALIB) CREF5-04174559100 | CONDUCTIVITY REFERENCE STANDARD (CALIBRATION) | 1 | |
| (CALIB) DHC-29435-001 | CALIBRATION TEST STANDARD, DASH8 PT6 53-10-61:PG7 (CALIBRATION) | 1 | |
| (CALIB) DHC29198-003 | CALIBRATION TEST STANDARD (CALIBRATION) | 1 | |
| (CALIB) EXBD300-50047-001 | CALIBRATION TEST STANDARD (CALIBRATION) | 1 | |
| (CALIB) HORIZONTAL STAB SLINGS | CALIBRATE AND RE-CERTIFY THIS TOOL (HORIZONTAL STAB SLINGS) IN ACCORDANCE WITH BOEING DWG C55007 REV. D (OR LATER) AND LOLER 1998 (OR LATER). TEST/CALIBRATION CERTIFICATE MUST REFERENCE MAINTENANCE DATA (MANUAL/STANDARD) AND REVISION USED. ADDITIONAL REFE | 1 | |
| (CALIB) NDT3282 | REFERENCE STANDARD (CALIBRATION) | 2 | |
| (CALIB) NDT3305B | REFERENCE STANDARD (CALIBRATION) | 1 | |
| (CALIB) PSD60-2R | UNIT TEST CARBURANT + STANDARD ACCESSORIES(CABLE 58345 + OPERATION MANUAL) | 2 | |
| (CALIB) PTS-2 | Precision Transfer Standard (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SS-5A | Synchro Standard (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SWREF1 | STANDARD, REFERNCE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TEK-SWREF1 | COMPOSITE STANDARD (CALIBRATION) | 1 | |
| 0 PPM | CALIBRATING OIL STANDARD 2 | 1 | |
| 001U532A5100000 | DORNIER 328/328 JET SE.4.48A CALIBRATION STANDARD Part 4 53-21-23 Page 11 Figure 407 Includes Test Report and Certificate of Conformance. | 1 | |
| 00460-062-000 | STANDARD ADAPTER FOR TRIPOD JACK | 1 | |
| 0061R7834 | STANDARD TEST ARM AND BLADE ASSEMBLY | 1 | |
| 01-0507-0000 | TRONAIR ATA-9 Standard Towbar Head, 20-1/2 in L, 10-5/8 in W, 4 in H, Steel, Blue | 2 | |
| 01-0513-0000 | TOWBAR HEAD STANDARD | 4 | |
| 01-0515-0000 | TRONAIR ATA-9 Standard Towbar Head, 16-3/16 in L, 6-1/4 in W, 4 in H, Steel, Blue | 5 | |
| 01-0545-0011 | TRONAIR ATA-9 Standard Towbar Head, 23-3/4 in L, 29.6 in W, 4 in H, Steel, Blue | 5 | |
| 01-0546-0000 | TRONAIR ATA-9 Standard Towbar Head, 26-1/4 in L, 37-1/8 in W, Steel, Powder-Coated | 4 | |
| 01-0556-0000 | TRONAIR ATA-9 Standard Towbar Head, 27-3/4 in L, 24.8 in W, 6 in H, Steel, Blue | 2 | |
| 01-0558-0000 | TRONAIR ATA-9 Standard Towbar Head, 3.74 in L, 20.64 in W, 4.27 in H, Steel, Blue | 6 | |
| 01-0576-0000 | TRONAIR ATA-9 Standard Towbar Head, 13-5/8 in L, 6-1/4 in W, 4 in H, Steel, Blue | 6 | |
| 01-0577-0010 | TRONAIR ATA-9 Standard Towbar Head, 28-1/4 in L, 29-5/8 in W, 7-3/8 in H, Steel, Blue | 1 | |
| 01-0577-0020 | TRONAIR ATA-9 Standard Towbar Head, 28-1/4 in L, 29-5/8 in W, 7-3/8 in H, Steel, Blue | 2 | |
| 01-0590-0000 | TRONAIR ATA-9 Standard Towbar Head, 20-1/4 in L, 9.06 in W, 4 in H, Steel, Blue | 9 | |
| 01-0599-0010 | TRONAIR ATA-9 Standard Towbar Head, 31 in L, 31 in W, 4 in H, Steel, Powder-Coated | 2 | |
| 01-0601-0000 | TRONAIR ATA-9 Standard Towbar Head, 23-1/4 in L, 6-1/4 in W, 4 in H, Steel, Blue | 3 | |
| 01-0602-0000 | TRONAIR ATA-9 Standard Towbar Head, 24-15/16 in L, 8-7/8 in W, 4-5/8 in H, Steel, Blue | 3 | |
| 01-0605-0000 | TRONAIR ATA-9 Standard Towbar Head, 27-1/16 in L, 31-1/2 in W, 6-1/16 in H, Steel | 4 | |
| 01-0612-0000 | TRONAIR ATA-9 Standard Towbar Head, 23-1/2 in L, 8 in W, 4-1/2 in H, Steel, Blue | 3 | |
| 01-1201-0010 | TOWBAR STANDARD MULTI HEAD | 14 | |
| 01-1202-0000 | Towbar, Standard Multi-Head (CE) | 13 | |
| 01-1270-0010 | Towbar, Standard Multi-Head (CE) | 7 | |
| 01-1950-5000 | Telecoupler, Standard | 5 | |
| 019 | BOEING REFERENCE STANDARD 7075-T6 ALUMINUM 7075 57-10-07 PART 6 PG.216. | 1 | |
| 01A1201-0010 | TRONAIR ATA-9 Standard Multi-Head Towbar, 4 in Tube Dia, 127 in L, 22 in W, 7-3/4 in H | 2 | |
| 02-285-1 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-10 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-2 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-3 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-4 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-5 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-6 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-7 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-8 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-9 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-1 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-10 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-11 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-12 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-13 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-14 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-17 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-2 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-20 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-21 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-22 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-23 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-24 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-3 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-4 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-5 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-6 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-7 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-8 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-9 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-441 | STANDARD MS COUNTERSINK 1/4-28 THREAD | 3 | |
| 02-441FBACR15FT | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) | 1 | |
| 02-441FBACR15FT-1 | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") | 1 | |
| 02-441SBACR15FT | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") | 1 | |
| 02-441SBACR15FT-1 | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") | 1 | |
| 022-510-404 | USM GO STANDARD DMS GO AD | 1 | |
| 026T018B | CALIBRATION STANDARD FOR YOKE | 1 | |
| 038 | BOEING 707 REFERENCE STANDARD 2024-T3 ALUMINUM DETAIL 1 FIGURE 8 SHEET 7 BBL 70.5 SPLICE 707-300/400..PART 6, 57-30-07 PG.71 | 1 | |
| 0381-1928 | ATTACHMENT, STANDARD CUTTING 90 DEG. HEAD ANGLE, , MODEL NO. CA2460 WITH CUTTING ATTACHMENT ,MNF, VICTOR. | 1 | |
| 039 | BOEING 707 REFERENCE STANDARD 2024-T3 ALUMINUM DETAIL 3 FIGURE 8 SHEET 9 BBL 70.5 SPLICE 707-300/400..PART 6, 57-30-07 PG.73 | 1 | |
| 04-10CR | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) | 1 | |
| 04-10CRQ | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-10R | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-10RQ | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-10WR | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-10WRQ | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-12LC | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-401 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-401-1 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-401-4 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-405 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-405-1 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-405-4 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-410 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-410-4 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-415 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-415-4 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-420 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-421 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-430 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-435 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-440 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-4LN | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-4WR | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-531 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) | 1 | |
| 04-532 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) (Holding capacity: 620 lbs) (Jaw gap: 0 - 1-1/2" (38 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Sta | 1 | |
| 04-533 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) (Holding capacity: 620 lbs) (Jaw gap: 0 - 1-1/2" (38 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Sta | 1 | |
| 04-543 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) (Holding capacity: 620 lbs) (Jaw gap: 0 - 1-1/2" (38 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Sta | 1 | |
| 04-544 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) (Holding capacity: 620 lbs) (Jaw gap: 0 - 1-1/2" (38 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Sta | 1 | |
| 04-545 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) (Holding capacity: 620 lbs) (Jaw gap: 0 - 1-1/2" (38 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Sta | 1 | |
| 04-5WR | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-5WRQ | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-62 | Sheet Metal Fastener Pliers (Type: Standard) (Add to cart: Add To Cart) | 2 | |
| 04-63 | Sheet Metal Fastener Pliers (Type: Standard) (Add to cart: Add To Cart) (Type: With Plastigrip Handles) (Add to cart: Add To Cart) | 1 | |
| 04-64 | Sheet Metal Fastener Pliers (Type: Standard) (Add to cart: Add To Cart) (Type: With Plastigrip Handles) (Add to cart: Add To Cart) (Type: With Black-Ox Coating) (Add to cart: Add To Cart) | 1 | |
| 04-6LN | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-6LNQ | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-7CR | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-7CRQ | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-7R | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-7RQ | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-7WR | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-7WRQ | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-8R | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-9LN | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-9LNQ | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-9R | IRWIN Vise-Grip® Locking Jaw Pliers (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Standard) (Overall length: 10" (254 mm)) (Type: Curved Jaw Locking Plier) (Add to cart: Add To Cart) (Jaw thickness: 7/16" (0 to 1-7/8")) (Model: Fast Release) (Overall lengt | 1 | |
| 04-CBX-3/32 | CBX STANDARD TEMP. FASTENER DIA.=3/32" GRIP=0-1/2" | 1 | |
| 04-CBXEL-1/4 | CBX STANDARD TEMP. FASTENER DIA.=1/4" GRIP=0.5-1.5" | 1 | |
| 04-CBXEL-1/8 | CBX STANDARD TEMP. FASTENER DIA.=1/8" GRIP=0.5-1.5" | 1 | |
| 04-CBXEL-3/16 | CBX STANDARD TEMP. FASTENER DIA.=3/16" GRIP=0.5-1.5" | 1 | |
| 04-CBXK-1/8 | CBX STANDARD TEMP. FASTENER DIA.=1/8" GRIP=1.5-2.5" | 1 | |
| 04-CBXL-3/16 | CBX STANDARD TEMP. FASTENER DIA.=3/16" GRIP=0-1" | 1 | |
| 04-HNX-3/32IN | WEDGELOCK FASTENER - 3/32 HEX BODY FASTENER (NUT TYPE; STANDARD SIZE) | 1 | |
| 04-K380 | TELESCOPING DEBURR TOOLS ( TYPE: STANDARD ) | 1 | |
| 04-M-1/4 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: 1/4" )( MATERIAL CAPACITY: 0 TO 5/16" )( TYPE: M TYPE STANDARD ) | 2 | |
| 04-M-1/8 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: #30 )( MATERIAL CAPACITY: 0 TO 1/4" )( TYPE: M TYPE STANDARD ) | 2 | |
| 04-M-3/16 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: #10 )( MATERIAL CAPACITY: 0 TO 1/4" )( TYPE: M TYPE STANDARD ) | 1 | |
| 04-M-3/32 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: #40 )( MATERIAL CAPACITY: 0 TO 1/4" )( TYPE: M TYPE STANDARD ) | 1 | |
| 04-M-5/32 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: #20 )( MATERIAL CAPACITY: 0 TO 1/4" )( TYPE: M TYPE STANDARD ) | 2 | |
| 04-MD10 | IRWIN® Standard Tinner Snips (Cut length: 2-3/4") (Overall length: 10" (254 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-MD12 | IRWIN® Standard Tinner Snips (Cut length: 2-3/4") (Overall length: 10" (254 mm)) (Add to cart: Add To Cart) (Cut length: 3-1/4") (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-MD7 | IRWIN® Standard Tinner Snips (Cut length: 2-3/4") (Overall length: 10" (254 mm)) (Add to cart: Add To Cart) (Cut length: 3-1/4") (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: 2") (Overall length: 7" (178 mm)) (Add to cart: Add To | 1 | |
| 04-S2 | Malco® Hand Seamers (Jaw width: 3-1/4" W x 1-1/4" D) (Overall length: 8-3/4" (222 mm)) (Type: Standard) (Add to cart: Add To Cart) | 2 | |
| 04-S3 | Malco® Hand Seamers (Jaw width: 3-1/4" W x 1-1/4" D) (Overall length: 8-3/4" (222 mm)) (Type: Standard) (Add to cart: Add To Cart) (Jaw width: 3-1/4" W x 1-1/4" D) (Overall length: 8-1/2" (216 mm)) (Type: Offset) (Add to cart: Add To Cart) | 1 | |
| 04-S6 | Malco® Hand Seamers (Jaw width: 3-1/4" W x 1-1/4" D) (Overall length: 8-3/4" (222 mm)) (Type: Standard) (Add to cart: Add To Cart) (Jaw width: 3-1/4" W x 1-1/4" D) (Overall length: 8-1/2" (216 mm)) (Type: Offset) (Add to cart: Add To Cart) (Jaw width: 6" | 1 | |
| 0880000-2 | Cessna Standard Inconel 601 .050" thick 2.5" x 2.5" | 1 | |
| 0880000-3 | Cessna Standard 301 SS Full Hard .050" thick 2.5" x 2.5" | 2 | |
| 0880000-4 | Cessna Standard 321 SS .018" thick 2.5" x 2.5" | 2 | |
| 0880000-5 | Cessna Standard 321 SS .063" thick 2.5" x 2.5" | 2 | |
| 0E X18B | WRENCH, COMBINATION, STANDARD LENGTH, 9/16IN, 12-POINT | 3 | |
| 0EX24B | WRENCH, COMBINATION, STANDARD L 3/4 | 5 | |
| 0EX26B | WRENCH, COMBINATION, STANDARD 13/16 | 4 | |
| 0EX28B | WRENCH, COMBINATION, STANDARD 13/16" | 4 | |
| 1 H-STAB REF STD | Boeing Reference standard | 1 | |
| 1-1 | 90° "Midget" Drilling Attachment - Standard Duty - MADE IN USA! | 1 | |
| 1-899-15 | SECONDARY STANDARD SENSOR | 1 | |
| 1/8 -27 ANPT | STANDARD, HALIDE LEAK | 1 | |
| 1/N-02-384 | Nomad Series N22 & N24 Reference Standard. for the inspection of Wing Strut Upper Fittings, Figure 27 Page 51. Includes Test Report and Certificate of Conformance. | 1 | |
| 10 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 10-0109-00 | Surface Standard, Per Airbus A319/320 51-63-01, Inconel 718 | 2 | |
| 10-04230 | STANDARD COMPASS | 1 | |
| 10-1-N | COLD WORKING TOOL STANDARD | 3 | |
| 10.801.039 | VACLAV 2 AIRCRAF WASTE LINE DESCALING GROUND SUPPORT UNIT WITH STANDARD EQUIPMENT | 1 | |
| 100 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 1000A | Boeing Standard, 707 PT6 55-10-07 FIG10: PG48 FIG10 SHEET6 | 1 | |
| 1000B | Boeing Standard, 707 PT6 55-10-07 FIG10: PG49 FIG10 SHEET7 | 1 | |
| 1001 | Boeing Standard | 10 | |
| 1002 | REFERENCE STANDARD | 4 | |
| 1002-321 | Boeing Standard, 747 PT6 51-00-00:PG12 FIG14 DETAIL4, 321 SS | 1 | |
| 1002-INCONEL | Boeing Standard, 747 PT6 51-00-00:PG12 FIG14 DETAIL4, INCONEL | 1 | |
| 1003 | Boeing Standard, 747 PT6 51-00-00:PG13 FIG14 DETAIL 5, 6AL-4V | 6 | |
| 1003-321 | Boeing Standard, 747 PT6 51-00-00:PG13 FIG14 DETAIL 5, 321 SS | 1 | |
| 1003-INCONEL | Boeing Standard, 747 PT6 51-00-00:PG13 FIG14 DETAIL 5, INCONEL | 1 | |
| 1004 | Boeing Standard, 747 PT6 51-00-00:PG14 FIG14 DETAIL6, 6AL-4V | 6 | |
| 1004-321 | Boeing Standard, 747 PT6 51-00-00:PG14 FIG14 DETAIL6, 321 SS | 1 | |
| 1004-INCONEL | Boeing Standard, 747 PT6 51-00-00:PG14 FIG14 DETAIL6, INCONEL | 1 | |
| 1005 | Boeing Standard, 747 PT6 51-00-00:PG15 FIG14 DETAIL7, 6AL-4V | 6 | |
| 1005-321 | Boeing Standard, 747 PT6 51-00-00:PG15 FIG14 DETAIL7, 321 SS | 1 | |
| 1005-INCONEL | Boeing Standard, 747 PT6 51-00-00:PG15 FIG14 DETAIL7, INCONEL | 1 | |
| 1006 | REFERENCE STANDARDS | 1 | |
| 1007 | REFERENCE STANDARDS | 1 | |
| 1008 | REFERENCE STANDARDS | 1 | |
| 1009 | REFERENCE STANDARDS | 1 | |
| 101-00401 | Barfield Standard Lead Package, For Model 2548H Fuel Quantity Tester | 4 | |
| 101-388014-1 | ACTUATOR STÁNDARD GEAR | 1 | |
| 1010 | REFERENCE STANDARDS | 1 | |
| 10156 | STANDARD RIVET SET KIT WITH 3X RIVET GUN | 1 | |
| 102-3120 | STANDARD TOOLS TENSIOMETER | 1 | |
| 10212-0501A | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 10212-0501B | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 10212-0501C | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 10212-0501D | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 10212-0501E | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 10212-0501F | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 10212-0501G | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 10212-0501H | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 10212-0501J | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 10212-0501K | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 10212-0501L | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 1050 | REFERENCE STANDARD | 1 | |
| 1062 | REFERENCE STANDARD | 3 | |
| 10213 | WILLIAMS 13 piece Standard Hex Key Set | 2 | |
| 1030-1 | STANDARD FLUSH SETS | 3 | |
| 1030-2 | STANDARD FLUSH SETS | 3 | |
| 1030-3 | STANDARD FLUSH SETS | 4 | |
| 10301 | STANDARD FLUSH | 3 | |
| 10302 | STANDARD FLUSH SET 1 INCH DIA | 3 | |
| 100347 | REFERENCE STANDARD | 1 | |
| 1001790 | MECHANIC STANDARD TOOLBOX RED | 1 | |
| 1006663 | RS232 STANDARD CABLE (1:1), 9-POLE, SOCKET/PIN | 1 | |
| 1006664 | RS232 STANDARD CABLE (1:1), 9-POLE, SOCKET/SOCKET | 1 | |
| 1011144 | AVIONIC TOOLBOX STANDARD | 1 | |
| 1017294 | CABIN STANDARD TOOLBOX | 1 | |
| 06010065 | STANDARD SOCKET 1" | 1 | |
| 10194630 | V-FIT HARNESS STANDARD | 1 | |
| 10252720 | 0.311 HSS DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 1037BJ | Calibration Standard, TO 1C-130J-36 20-40-00 PG31:FIG21 | 1 | |
| 106ETMAMY | Set, Socket Driver, Metric, Hex, Standard, 2 to 6 mm (6 pcs.) | 1 | |
| 1091K2 | GREASE-DISPENSING TIP FOR STANDARD GREASE FITTINGS, 1-1/2" LONG, NPSF THREAD | 1 | |
| 10L16-4.96X2-A00-P-2.5-OM | STANDARD PHASED-ARRAY PROBE, 10 MHZ LINEAR ARRAY, 16 ELEMENTS, 0.012 IN. (0.31MM) PITCH (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| 10L16-A00 | STANDARD PHASED-ARRAY PROBE, 10 MHZ LINEAR ARRAY, 16 ELEMENTS, 0.012 IN. (0.31MM) PITCH (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| 10L64-38.4X7-A2-P-2.5-OM | STANDARD PHASED ARRAY PROBE-U8330658 | 1 | |
| 10RS-52-2-MLG-FTG-AF | MD-10 REFERENCE STANDARD FIGURE 1.3, SHEET 1&2. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.01.1 | BOEING REFERENCE STANDARD KC10 Page 1-6 MATERIAL: 2024-T3, 7075-T6, 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.02 | BOEING REFERENCE STANDARD KC10 53.10.001, 53.10.013/.014 Page 1-8 Material: 2024-T3 and 7075-T6, 6AL-4V or Phenolic. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.03.1 | Douglas Standard, DC10 SID PSE53.10.005/.006:PG1 SHEET1 | 1 | |
| 10RS.04.1 | Douglas Standard, DC10 SID PSE53.10.007:PG1 SHEET1 | 1 | |
| 10RS.04M | Douglas Standard, DC10 SID PSE53.10.007:PG1 SHEET1 | 1 | |
| 10RS.05 | DC-10 standard | 1 | |
| 10RS.07 | Reference Standard, DC-10 SID PSE53.10.055/.056:PG1 DETAIL1 | 1 | |
| 10RS.08 | Douglas Standard, MD11 ALI SECTION 2-1:PG1 FIG1.19/DC10 PSE 55.10.003/.004 | 2 | |
| 10RS.10.1 | Reference Standard, DC-10 SID PSE 55.10.006:PG1 SHEET1 | 2 | |
| 10RS.100 | Reference Standard, DC-10 | 1 | |
| 10RS.15a | Reference Standard, DC-10 SID PSE55.10.005/.006:PG1 SHEET1 | 1 | |
| 10RS.15b | Reference Standard, DC-10 SID PSE55.10.005/.006:PG1 SHEET1 | 1 | |
| 10RS.15c | Reference Standard, DC-10 SID PSE55.10.005/.006:PG1 SHEET1 | 1 | |
| 10RS.16a | Reference Standard, DC-10 SERIES 10 SID PSE57.10.013/.014:PG1 SHEET1 | 1 | |
| 10RS.16b | Reference Standard, DC-10 SERIES 30/40 SID PSE57.10.013/.014:PG1 SHEET1 | 1 | |
| 10RS.17 | Douglas Standard, DC10 SID PSE57.10.019/.020:PG1 SHEET1 | 1 | |
| 10RS.17.1 | DC-10 SID REFERENCE STANDARD DETAIL -3 & -5 PAGE 2-3. MATERIAL: 2024-T3 ALUMNIUM. Includes Certification Report and COC. | 1 | |
| 10RS.18 | Douglas Standard, DC10 SID PSE53.10.003/.004: | 1 | |
| 10RS.20aFN | Reference Standard, Bolt (Facimile), H-11 Steel, DC-10 SID, 8.25" Length, 1.25" Diam., An, Bn, & Cn Notches | 1 | |
| 10RS.20bFN | Reference Standard, Bolt (Facimile), H-11 Steel, DC-10 SID, 9.5" Length, 1.25" Diam., An, Bn, & Cn Notches | 1 | |
| 10RS.21 | DC10 Standard, PSE 54.10.025/54.10.027:-1DETAIL | 2 | |
| 10RS.22A | Reference Standard, DC-10 SID PSE 54.10.029/.030:PG1 SHEET1 | 2 | |
| 10RS.22a | DC-10 REFERENCE STANDARD 54-10-029/.030 Page 1-2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| 10RS.23 | DC-10 SID reference standard | 2 | |
| 10RS.25A | Douglas Standard, DC10 SID PSE57.10.029/.030:PG1 SHEET1 | 1 | |
| 10RS.25A/1.315 | Douglas Standard, DC10 SID PSE57.10.029/.030:PG1 SHEET1, w/altered 1.315" diameter hole | 1 | |
| 10RS.25B | Douglas Standard, DC10 SID PSE57.10.029/.030:PG1 SHEET1 | 1 | |
| 10RS.25B/1.331 | Douglas Standard, DC10 SID PSE57.10.029/.030:PG1 SHEET1, w/adjusted diameter 1.331" hole | 1 | |
| 10RS.25C | Douglas Standard, DC10 SID PSE57.10.029/.030:PG1 SHEET1 | 1 | |
| 10RS.25a | DC-10 SID REFERENCE STANDARD 57.10.029/.030. DETAIL -3 PAGE 1. MATERIAL: 7075-T7 ALUMNIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.25b | DC-10 SID REFERENCE STANDARD DETAIL -1 PAGE 1. MATERIAL: 7075-T7 ALUMNIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.25c | DC-10 SID REFERENCE STANDARD DETAIL -5 PAGE 1. MATERIAL: 7075-T7 ALUMNIUM. includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.26.1BM | DOUGLAS DC-10 REFERENCE STANDARD 54.10.031/.032 PAGES 1-8 (SHEET1-8). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| 10RS.26.1bM | DOUGLAS DC-10 REFERENCE STANDARD 54.10.031/.032 PAGES 1-8 (SHEET1-8). Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.26.2 | DC10 Reference Standard, PSE 54.10.031/.032: -505 DETAIL SHEET1 | 1 | |
| 10RS.27b | DC-10 SID REFERENCE STANDARD DETAILS -7,-9 & -11 PAGE 1-6. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. | 1 | |
| 10RS.31A | DC10 Standard, PSE 54.10.027:-1DETAIL SHEET1 | 1 | |
| 10RS.31B | DC10 Standard, PSE 54.10.027:-2DETAIL SHEET1 | 1 | |
| 10RS.32 | DC10 Standard, PSE 54.10.027:-3DETAIL SHEET1 | 1 | |
| 10RS.33A | DC10 Standard, PSE 54.10.027:-5DETAIL SHEET1 | 1 | |
| 10RS.33B | DC10 Standard, PSE 54.10.027:-6DETAIL SHEET1 | 1 | |
| 10RS.33a | DC-10 REFERENCE STANDARD 54-10-027 Page 1-2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.33b | DC-10 REFERENCE STANDARD 54-10-027 Page 1-2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.35 | DC10 Standard, PSE 54.10.027:-501DETAIL SHEET1 | 1 | |
| 10RS.36a | DC10 Standard, PSE 54.10.027:PG1 SHEET1 | 1 | |
| 10RS.36aF | DC10 Standard, PSE 54.10.027:PG1 SHEET1 | 1 | |
| 10RS.36aFN | DC10 Standard, PSE 54.10.027:PG1 SHEET1 | 1 | |
| 10RS.36aN | DC10 Standard, PSE 54.10.027:PG1 SHEET1 | 1 | |
| 10RS.36b | DC10 Standard, PSE 54.10.027:PG1 SHEET1 | 1 | |
| 10RS.36bF | DC10 Standard, PSE 54.10.027:PG1 SHEET1 | 1 | |
| 10RS.36bFN | DC10 Standard, PSE 54.10.027:PG1 SHEET1 | 1 | |
| 10RS.36bN | DC10 Standard, PSE 54.10.027:PG1 SHEET1 | 1 | |
| 10RS.39 | NDT STANDARD | 1 | |
| 10RS.39.1 | DC-10 SID REFERENCE STANDARD DETAIL -1, -3 & -5 PAGE 1-5. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. | 1 | |
| 10RS.41-505 | Reference Standard, DC-10 PSE 53.10.045/.046:PG1 SHEET1 | 1 | |
| 10RS.43 | DC10 Standard, PSE 54.10.027 | 1 | |
| 10RS.47 | MD-11 Eddy current reference standard Section 2-1 Page 1 Figure 1.21 | 1 | |
| 10RS.48 | BOEING REFERENCE STANDARD - KC10. Page 1-23. Material: 2024-T3, 7075-T6, and 7150-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.50 | DOUGLAS DC-10 REFERENCE STANDARD 54.10.031/.032 PAGES 1-5 (SHEET1-5). Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.50-1 | Douglas Standard, DC-10 SID, PAGE 1 | 1 | |
| 10RS.51-MLG-FTG-FF | Reference Standard, DC10 MLG plus 4 notches, Includes wood model | 1 | |
| 10RS.52-1-MLG-FTG-AF | MD-10 REFERENCE STANDARD FIGURE 1.2, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.53-1-MLG-FTG-CC-UPR | MD-10 REFERENCE STANDARD FIGURE 1.4, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.53-2-MLG-FTG-AA | MD-10 REFERENCE STANDARD FIGURE 1.5, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.53-3-MLG-FTG-DD | MD-10 REFERENCE STANDARD FIGURE 1.6, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.55-1 | BOEING KC10 ET REFERENCE STANDARD. INCLUDES: -3 SKIN, -53 TEAR STRAP, -63 SHEAR CLIP. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 10RS.55-3 | BOEING KC10 ET REFERENCE STANDARD. INCLUDES: -3 SKIN, -53 TEAR STRAP, -163 SHEAR CLIP. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 10RS.55-5 | BOEING KC10 ET REFERENCE STANDARD. INCLUDES: -3 SKIN, -53 TEAR STRAP, -363 SHEAR CLIP. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 10RS.55-7 | BOEING KC10 ET REFERENCE STANDARD. INCLUDES: -103 SKIN, -53 TEAR STRAP, -563 SHEAR CLIP. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 10RS.bN | DC-10 REFERENCE STANDARD DETAIL RA11005-12-2, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027 | 1 | |
| 10RS54-10-11AFT | DC10 Standard, DC10 PT4 53-10-11:PG634A, FIG603, SHEET21B, 7075T6, Aft Bulkhead | 1 | |
| 10RS54-10-11S | DC10 Standard, DC10 PT4 53-10-11:PG632C, FIG603, SHEET20G, 4340 Steel | 1 | |
| 10U10WPCC5 | EYES PROTECTIVE GLASSES OR EQUIVALENT GLASSES COMPLIANT TO THE STANDARDS EN166, EN170, EN172 AND 175) | 1 | |
| 11-01-0097 | Hand Crimp Tool for 2.36mm Diameter, Standard .093" Pin and Socket Crimp Terminal, 22-24 AWG | 1 | |
| 110-001100200 | CHAVE AJUSTAVEL STANDARD ACO LIGA 23,0MM 8 | 1 | |
| 11075 | Standard ROTACUT Hole Cutting Kit - The Original! Includes 7 Cutters - MADE IN USA! | 3 | |
| 110ETMAY | Set, Socket Driver, Hex, Standard, 1/16" to 1/4" (10 pcs.) | 2 | |
| 110TMDY | 1/4 STANDARD SOCKET SET 3/16" - 9/16" | 4 | |
| 111502-1 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (STANLEY) | 1 | |
| 111515-1 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (STANLEY) | 1 | |
| 1123000-550 | STRETCHER - STANDARD 787 MODEL | 1 | |
| 11260001_STAH | Ratchet, HY-LOK, Standard Handle, 4 7/16" | 1 | |
| 1159SST05 | ULTRASONIC REFERENCE STANDARD | 1 | |
| 1159SST261 | CALIBRATION STANDARD (NDT) | 1 | |
| 1159WM20109-NDT-1 | SPLICE FITTING CALIBRATION STANDARD | 1 | |
| 11638 | REFERENCE STANDARD SB190-57-0031/02 | 1 | |
| 118-540-270 | REFERENCE STANDARD V2 - AÇO | 1 | |
| 118-540-400 | STANDARD BLOCK ;SPECIFICATION: V1 ;CRACK SIZE: 1 MM | 1 | |
| 118A | REFERENCE STANDARD | 1 | |
| 12-1-N | COLD WORKING TOOL STANDARD | 3 | |
| 12-2-N | COLD WORKING TOOL STANDARD | 1 | |
| 120-45296-001 | CALIBRATION TEST STANDARD | 1 | |
| 120-45297-001 | CALIBRATION TEST STANDARD | 1 | |
| 120-47898-001 | CALIBRATION TEST STANDARD | 1 | |
| 120-47899-001 | CALIBRATION TEST STANDARD | 1 | |
| 120-47998-001 | CALIBRATION TEST STANDARD | 1 | |
| 120-47999-001 | CALIBRATION TEST STANDARD | 1 | |
| 12245-004-001 | ULTRASONIC CALIBRATION STANDARD, MIDSPAR | 1 | |
| 12245-011-001 | ULTRASONIC CALIB.STANDARD LEAR 45 NTM 57-30-05 | 1 | |
| 12245-062-001 | ULTRASONIC REFERENCE STANDARD, AILERON DRIVE SUPPO | 1 | |
| 12245-062-005 | ULTRASONIC REFERENCE STANDARD | 1 | |
| 12345-040-001 | EC CALIBRATION STANDARD LEAR 45 NTM 55-10-05 | 1 | |
| 12445-002-003 | TOOL, TEST SET, CALIBRATION STANDARD | 3 | |
| 12445-002-004 | TOOL-ULTRASONIC CALIBRATION STANDARD | 1 | |
| 124B | OSCILLOSCOPE – PORTABLE - STANDARD KIT, NO SOFTWARE | 1 | |
| 125 | BOEING REFERENCE STANDARD 767 PT 6 -51-00-05 FIG 2 PAGE 6 & 737 pART 6 51-00-00 FIGURE 2 PAGE 6 DETAIL II. HOLE SIZES: 0.1875, 0.250, 0.3125, 0.375, 0.4375, 0.500. Material: 4130 or 4340 Cres Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| 125/H-20 | AMM CH 20 STANDARD PRACTICES-AIR FRAME | 1 | |
| 125A | CASA Standard 51-30-02 PT 1 PG 6 | 1 | |
| 126 | REFERENCE STANDARD | 7 | |
| 126-1 | Boeing Standard, 747 PT6 51-00-00 PG10: FIG23, DETAIL IV or CASA CN235 PT1 51-30-04:PG10 FG4 *with .040 deep notch | 2 | |
| 126-2024T3 | Boeing Standard,747 PT6 51-00-00 PG10: FIG23, DETAIL IV, 2024-T3 Aluminum | 1 | |
| 126-4340 | Boeing Standard, 747 PT6 51-00-00 PG10: FIG23, DETAIL IV, Steel | 1 | |
| 126-7075T6 | Boeing Standard,747 PT6 51-00-00 PG10: FIG23, DETAIL IV, 7075-T6 Aluminum | 1 | |
| 126-R&D | Boeing Standard,747 PT6 51-00-00 PG10: FIG23, with 4 additional notches | 1 | |
| 126-R&D Ti | Boeing Standard,747 PT6 51-00-00 PG10: FIG23, with 4 additional notches, Titanium | 1 | |
| 127 - 0.036 | REFERENCE STANDARD | 1 | |
| 127 - 0.040 | REFERENCE STANDARD | 1 | |
| 127 - 0.050 | REFERENCE STANDARD | 1 | |
| 127 - 0.063 | REFERENCE STANDARD | 1 | |
| 127 - 0.072 | REFERENCE STANDARD | 1 | |
| 127 - 0.080 | REFERENCE STANDARD | 1 | |
| 127 - 0.090 | REFERENCE STANDARD | 1 | |
| 127 - 0.100 | REFERENCE STANDARD | 1 | |
| 127 - 0.110 | REFERENCE STANDARD | 1 | |
| 127 - 0.125 | REFERENCE STANDARD | 1 | |
| 127 -0.032 | REFERENCE STANDARD | 1 | |
| 127-,050 | REFERENCE STANDARDS | 1 | |
| 127-,063 | REFERENCE STANDARDS | 1 | |
| 127-,080 | REFERENCE STANDARDS | 1 | |
| 127-,090 | REFERENCE STANDARDS | 1 | |
| 127-,110 | REFERENCE STANDARDS | 1 | |
| 127-,125 | REFERENCE STANDARDS | 1 | |
| 127-.032 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.036 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.040 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.050 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.063 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.072 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.080 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.090 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.100 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.110 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.125 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-0.032 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.036 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.040 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.050 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.063 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.071 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.080 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.090 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.100 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.110 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.125 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-XXX | Corrosion reference standard Calibration Block | 1 | |
| 127A | BOEING REFERENCE STANDARD - 0.032” AL | 1 | |
| 127A-.032 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 2 | |
| 127A-.036 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
| 127A-.036/2024 | Boeing reference standard | 1 | |
| 127A-.040 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
| 127A-.050 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
| 127A-.063 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
| 127A-.072 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
| 127A-.072/2024 T3 CALD | Boeing reference standard | 1 | |
| 127A-.080 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
| 127A-.090 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
| 127A-.100 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
| 127A-.110 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
| 127A-.125 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
| 127A-032 | Boeing reference standard | 2 | |
| 127B | CASA Standard 51-30-06 PT1 PG 5 | 1 | |
| 12S1283-02 | DOCTO® ADJUSTABLE DEPTH CONTROL SAWS STANDARD MODE | 2 | |
| 13-3022 | Bowers 13-3022 Standard Tracer SH Smallest Bore Dia 8mm Max. Measuring Depth 27mm Included in the Delivery | 1 | |
| 13-3030 | Bowers 13-3030 Standard Tracer Extension 100mm | 1 | |
| 130-.300 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .300" Nominal | 1 | |
| 130-.330 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .330" Nominal | 1 | |
| 130-.335 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .335" Nominal | 1 | |
| 130-.350 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .350" Nominal | 1 | |
| 130-.360 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .360" Nominal | 2 | |
| 130-.370 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .370" Nominal | 1 | |
| 130-.380 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .380" Nominal | 1 | |
| 130-.600 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .600" Nominal | 1 | |
| 130A | Boeing Standard, ALL PT6 53-50-00:PG13 FIG1 DETAIL VI | 2 | |
| 130B | Boeing Standard, ALL PT6 53-50-00:PG13 FIG1 DETAIL VI | 2 | |
| 130C | Boeing Standard, ALL PT6 53-50-00:PG13 FIG1 DETAIL VI (same as NDT706P) | 2 | |
| 131681AJ14-9 | WIRE,ELECTRICAL, STANDARD 14 AWG WIRE | 1 | |
| 13216-4 | EASA STANDARD TOOL BOX, MAKE STAHLWILLE | 1 | |
| 134P1 | Boeing Standard, 707 PT4 53-40-07:PG11 FIG2 SHEET5 | 1 | |
| 134P2 | Boeing Standard, 707 PT4 53-40-07:PG11 FIG2 SHEET5 | 1 | |
| 13A-5/16 | COMBINATION WRENCH,STANDARD LENGTH, 5/16, 12PT | 1 | |
| 1402B80 | "PUMP - VACUUM, PORTABLE, STANDARD DUTY | 1 | |
| 1409-00-2 | KIT REFERENCE STANDARD NDI- TORQUE BOX. NDI WING ASSY. | 11 | |
| 1442-04 | HELICOIL STANDARD INSERT 2B THREAD | 1 | |
| 1442-06 | HELICOIL STANDARD INSERT 2B THREAD | 1 | |
| 1442-2 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1443-5 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 145-15998-001 | EMBRAER REFERENCE STANDARD 54-50-00 FIG 603, 4340 STEEL | 3 | |
| 145-4413-0058 | REFERENCE STANDARD TITANIUM | 1 | |
| 145-44130-401 | KIT REFERENCE STANDARD NDI- TORQUE BOX. NDI WING ASSY. | 3 | |
| 145-44131-001 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, ALUMINUM ALLOY | 6 | |
| 145-44131-003 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, STEEL ALLOY | 3 | |
| 145-44131-005 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, TITANIUM ALLOY | 3 | |
| 145-54-0008 | EMBRAER REFERENCE STANDARD 54-50-00 FIG 606, 4340 STEEL | 1 | |
| 145T09065-401 | REFERENCE STANDARD FOR FASTENER | 1 | |
| 14H-45 | CONTACT TIPS - STANDARD THREADED STYLE 1.2 MM | 1 | |
| 15-3046 | Standard Wire Pull Grip for MPT-250C | 2 | |
| 15-5 PH | CALIBRATION REFERENCE STANDARD, 15-5 PH STAINLESS STEEL, CONTAINING 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES, (MHIRJ OR EQUIVALENT) | 1 | |
| 15-5PH | CALIBRATION REFERENCE STANDARD 15-5 PH STAINLESS S | 1 | |
| 15-628-2 | Filter - Regulator - Lubricator Mini Assemblies (Type: Mini Assemblies) (Pipe size: 1/8") (Add to cart: Add To Cart) (Type: Mini Assemblies) (Pipe size: 1/4") (Add to cart: Add To Cart) (Type: Standard Assemblies) (Pipe size: 1/4") (Add to cart: Add To Ca | 1 | |
| 15-628-3 | Filter - Regulator - Lubricator Mini Assemblies (Type: Mini Assemblies) (Pipe size: 1/8") (Add to cart: Add To Cart) (Type: Mini Assemblies) (Pipe size: 1/4") (Add to cart: Add To Cart) (Type: Standard Assemblies) (Pipe size: 1/4") (Add to cart: Add To Ca | 1 | |
| 15-628-4 | Filter - Regulator - Lubricator Mini Assemblies (Type: Mini Assemblies) (Pipe size: 1/8") (Add to cart: Add To Cart) (Type: Mini Assemblies) (Pipe size: 1/4") (Add to cart: Add To Cart) (Type: Standard Assemblies) (Pipe size: 1/4") (Add to cart: Add To Ca | 1 | |
| 15-E35+ | Bowers 15-E35+ ACCRETECH HandySurf + Portable Surface Measurement Standard Unit with 5µm Stylus | 1 | |
| 15-E35/2+ | Bowers 15-E35/2+ ACCRETECH HandySurf + Portable Surface Measurement Standard Unit with 2µm Stylus | 1 | |
| 150-060 | CANOPY/ENGINE COVER (standard canopy cover type) | 1 | |
| 150-830 | TRAVEL COVER, Light Weight Travel Canopy/Engine Cover (standard canopy cover type) | 1 | |
| 158QGDBV-450/1100-20-S400-5F | QUACKENBUSH MOTOR, STANDARD | 1 | |
| 15F2716 | TOWBAR - 737 - 16 FT LONG - NO LIFTING UNDERCARRIAGE - CLAMP STYLE HEAD (2713) STANDARD - EXPANDING PIN TYPE HEAD (2491) OPTIONAL | 5 | |
| 15−5 PH | Calibration reference standard 15−5 PH stainless steel containing 0.008 in. (0.20 mm)0.020 in. (0.51 mm) and 0.040 in. (1.02 mm) deep electrical discharge machined notches (Bombardier Inc. or equivalent) | 1 | |
| 16-1-N | COLD WORKING TOOL STANDARD | 1 | |
| 18 | REFERENCE STANDARD | 1 | |
| 20 | AMERICAN STANDARD WIRE GAUGE | 3 | |
| 23 | Tesa 00510041 Standard models Vernier Calipers 0-150mm | 1 | |
| 128 | BOEING REFERENCE STANDARD 767 PT 6 51-00-06 PAGE 4 FIGURE 1, MATERIAL: Aluminum Alloy. Includes Test Report and Certificate of Conformance. | 1 | |
| 134 | Boeing Reference Standard 707 Part 4 53-40-07 Page 12 Figure 2 (Sheet 6) Detail 3. Material: 4330M or Equivalent. Includes Test Report and Certificate of Conformance. | 4 | |
| 181 | BOEING REFERENCE STANDARD 707 PART 6 55-10-07 PAGE 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 182 | BOEING REFERENCE STANDARD 707 PART 6 55-10-07 PAGE 17. Includes Test Report and Certificate of Conformance. | 1 | |
| 185 | Boeing Refence Standard | 2 | |
| 188 | REF. STANDARD | 1 | |
| 189 | Reference Standard | 7 | |
| 192 | Reference Standard | 4 | |
| 194 | Reference Standard | 9 | |
| 198 | Reference Standard 198 | 1 | |
| 201 | CALIBRATION STANDARD, CASA 55-15-00, CASA CN-25515000B001, PT 6, PG 4 | 8 | |
| 206 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 19. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD14)Includes Test Report and Certificate of Conformance. | 3 | |
| 208 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 19. MATERIAL 2024 ALUMINUM (FASTENERS: BACB30PT5-10, BACN10TN5)Includes Test Report and Certificate of Conformance. | 1 | |
| 210 | CALIBRATION STANDARD, CASA CN-25515100B000 | 2 | |
| 220 | CALIBRATION STANDARD, CASA CN-27121120B000 | 8 | |
| 221 | CALIBRATION STANDARD, CASA CN-27120000BA00 | 3 | |
| 230 | STANDARD FEELER GAUGE SETS | 5 | |
| 239 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 18. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD)Includes Test Report and Certificate of Conformance. | 1 | |
| 240 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 18. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD)Includes Test Report and Certificate of Conformance. | 1 | |
| 262 | BOEING REFERENCE STANDARD 727 PT 6 53-10-27 | 1 | |
| 263 | BOEING REFERENCE STANDARD 727 PT 6 53-10-27 PAGE 4 FIG 1. Includes Test Report and Certificate of Conformance. | 1 | |
| 272 | BOEING REFERENCE STANDARD 727, PT 6 55-10-27 FIG. 2 Includes Test Report and Certificate of Conformance. | 1 | |
| 285 | BOEING REFERENCE STANDARD 727 PART 6 57-10-27 FASTENER (BACB30NM7K23). Includes Test Report and Certificate of Conformance. | 1 | |
| 286 | BOEING REFERENCE STANDARD 727 PART 6 57-10-27 FASTENER (BACB30NM7K21). Includes Test Report and Certificate of Conformance. | 1 | |
| 289 | REFERENCE STANDARD | 6 | |
| 296 | BOEING REFERENCE STANDARD 727 PT 6 53-30-27 Includes Test Report and Certificate of Conformance. | 1 | |
| 300.20 | REFERENCE STANDARD | 1 | |
| 305 | BOEING REFERENCE STANDARD 737 PART 6 57-10-18 FIGURE 2 PAGE 6. Includes Test Report and Certificate of Conformance. | 1 | |
| 311 | PHASE ANGLE STANDARD | 1 | |
| 312 | BOEING REFERENCE STANDARD 737 PART 6 53-10-17 PAGE 6 FIGURE 2. 2024-T3 ALUMINUM Includes Test Report and Certificate of Conformance. | 7 | |
| 313 | BOEING STANDARD, 737 PT6; 53-10-17; PG7; FG3 | 20 | |
| 315 | BOEING REFERENCE STANDARD 737 PART 4 55-30-01 FIGURE 1 PAGE 4. Includes Test Report and Certificate of Conformance. | 4 | |
| 316 | BOEING REFERENCE STANDARD 737 PART 4 55-30-01 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 317 | BOEING STANDARD, 737 PT6 53-10-16:PG5 FIG2 | 1 | |
| 320 | BOEING REFERENCE STANDARD 737 PART 6 55-10-19 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 321 | BOEING REFERENCE STANDARD 737 PART 6 53-10-19 FIGURE 3 PAGE 6. Includes Test Report and Certificate of Conformance. | 7 | |
| 326 | BOEING REFERENCE STANDARD 737 PART 6 53-10-28 FIGURE 1 PAGE 4. Includes Test Report and Certificate of Conformance. | 1 | |
| 335 | REFERENCE STANDARD | 10 | |
| 2000 | STANDARD LINEN | 5 | |
| 2006 | BOEING REFERENCE STANDARD 727 PART 6 57-10-27 FASTENER (BACB30NM7K19). Includes Test Report and Certificate of Conformance. | 1 | |
| 2972 | Mitutoyo 2972 Standard One Revolution Dial Indicator 1mm | 1 | |
| 2976 | Mitutoyo 2976 Standard One Revolution Dial Indicator .02" | 1 | |
| 2978 | Mitutoyo 2978 Standard One Revolution Dial Indicator .06" | 1 | |
| 3171 | Reference Standard NDT3171 | 1 | |
| 3230 | REFERENCE BLOCK (BOEING BONDED STANDARD 737) | 1 | |
| 3233 | REFERENCE BLOCK (BOEING BONDED STANDARD 737) | 4 | |
| 13060 | 6” STANDARD HOLE FINDER* | 1 | |
| 13230 | 13” STANDARD HOLE FINDER* | 1 | |
| 16026 | 0.1024 HIGH SPEED STEEL DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 16029 | 0.1142 HIGH SPEED STEEL DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 16075 | 0.2953 HIGH SPEED STEEL DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 16087 | 0.3425 HIGH SPEED STEEL DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 16163 | LOCKING PLIER (VICE GRIP STYLE) 7" STANDARD JAW | 1 | |
| 16474 | 0.2913 COBALT DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 16488 | 0.3465 HIGH SPEED STEEL DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 16491 | 0.3583 COBALT DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 129254 | PROBE, TRANSVERSE, STANDARD, RIGID GLASS EPOXY STEM | 1 | |
| 132351 | EDDY CURRENT REFERENCE STANDARD | 1 | |
| 144009 | AC60-LP AXLE SPACER-STANDARD | 1 | |
| 17-1XSP | USATCO RIVET GUNS ( BLOWS PER MINUTE: 3600 )( CAPACITY (ALUMINUM - STEEL): 1/8" ALUMINUM )( OVERALL LENGTH: 5-11/16" (145 MM) )( TYPE: STANDARD .401 SHANK ) | 1 | |
| 17-3XSP | USATCO RIVET GUNS ( BLOWS PER MINUTE: 2160 )( CAPACITY (ALUMINUM - STEEL): 3/16" - 5/32" )( OVERALL LENGTH: 7-5/16" (186 MM) )( TYPE: STANDARD .401 SHANK ) | 1 | |
| 17-4XSP | USATCO RIVET GUNS ( BLOWS PER MINUTE: 1740 )( CAPACITY (ALUMINUM - STEEL): 1/4" - 3/16" )( OVERALL LENGTH: 8-5/16" (211 MM) )( TYPE: STANDARD .401 SHANK ) | 2 | |
| 17-9XBSP | USATCO RIVET GUNS STANDARD .498 SHANK | 1 | |
| 170A.18 | STANDARD MULTIGRIP PLIERS 30MM | 1 | |
| 170A.30 | STANDARD MULTIGRIP PLIERS 55MM | 1 | |
| 171-00844-601 16E1 | EMBRAER REFERENCE STANDARD 7075-T7 ALUMINUM.Includes Test Report and Certificate of Conformance. | 1 | |
| 171T17969-401 | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-10-00 pages 4-11. Includes Test Report and Certificate of Conformance. | 3 | |
| 171T17973-401 | CALIBRATION STANDARD - CALIBRATE EDY CURRENT INSTR | 4 | |
| 175-00215 | CABLE STANDARD LEADS | 4 | |
| 17M46 | STANDARD WINDOWS HANDLING TOOL | 1 | |
| 17P9M2007 | Douglas Reference Standard Assembly For the Ultrasonic Calibration of Upper Wing Skin to common Stringer, Figure24-4 sheets 253. Material: 7075 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 17TES0055 | ROSE ANALYSIS UNIT (STANDARD) | 2 | |
| 17TES0078 | AVIATION CABLE (STANDARD REEL/ROLL | 9 | |
| 182-511-10 | STANDARD SCALE | 1 | |
| 182-534-10 | MITUTOYO WORKING STANDARD SCALE, 1000MM RANGE, 1MM GRAD | 1 | |
| 186-27MM | Eddy current standard | 1 | |
| 186-40MM | Eddy current standard | 1 | |
| 186A | Boeing Standard, 737/747 PT6 51-00-00:PG8 FIG11 DETAIL III .1875 hole dia. | 3 | |
| 186A-F | Boeing Standard, 737/747 PT6 51-00-00:PG6 FIG1 DETAILII, 2 LAYERS/6 HOLES | 1 | |
| 186ABCDEF | BOEING CUSTOM COMBINATION REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.1875", .2500", .3125", .3750", .4375", .500. Each hole size marked with the corresponding Boeing Part number 186A-186F Includes Test Report and Certific... | 1 | |
| 186B | Boeing Standard, 737/747 PT6 51-00-00:PG8 FIG11 DETAIL III .2500 hole dia. | 3 | |
| 186C | Boeing Standard, 737/747 PT6 51-00-00:PG8 FIG11 DETAIL III .3125 hole dia. | 4 | |
| 186D | Boeing Standard, 737/747 PT6 51-00-00:PG8 FIG11 DETAIL III .3750 hole dia. | 4 | |
| 186E | Boeing Standard, 737/747 PT6 51-00-00:PG8 FIG11 DETAIL III .4375 hole dia. | 4 | |
| 186F | Boeing Standard, 737/747 PT6 51-00-00:PG8 FIG11 DETAIL III .5000 hole dia. | 3 | |
| 186G | BOEING STANDARD 737/747 PT6 51-00-00 PROCEDURE 1 PG5 FIG2, .563 DIAMETER HOLE | 2 | |
| 186H | BOEING STANDARD 737/747 PT6 51-00-00 PROCEDURE 1 PG5 FIG2, .625 DIAMETER HOLE | 2 | |
| 186J | BOEING STANDARD 737/747 PT6 51-00-00 PROCEDURE 1 PG5 FIG2, .750 DIAMETER HOLE | 2 | |
| 188A | REFERENCE STANDARD | 5 | |
| 188A-2024T3 | Boeing Standard,737 PT6 51-00-00:PG12 FIG4 DETAIL VI, 2024-T3 Aluminum | 1 | |
| 189A | Boeing Standard 737 51-00-00 Part 6 Figure 4 | 1 | |
| 19-4301-0000 | POTABLE WATER CART, STANDARD (100 | 9 | |
| 19-4305-0000 | CART, POTABLE WATER CART, STANDARD (31 GAL/117 L) FILL RESERVOIR (Œ) | 10 | |
| 190-53-0059 | Embraer 190 Standard, 53-10-00 Pg 4-8 FG 1 | 1 | |
| 1920166 (NRK-3AL) | REFERENCE STANDARD ALUMINUM 7075 | 1 | |
| 1920167 (NRK-3T) | REFERENCE STANDARD TITANIUM (HOLES) | 1 | |
| 1920168 (NRK-3ST) | REFERENCE STANDARD 4340 STEEL | 1 | |
| 194A | Boeing Standard, 737 PT6 53-30-00:PG 7 FIG 4 Procedure 3, 1/4 and 7/32 holes | 4 | |
| 194A-.312/.375 | Boeing Standard, 737 PT6 53-30-00:PG5 FIG3 DETAIL3, 5/16 and 3/8 holes | 1 | |
| 194B | Reference Standard | 1 | |
| 194C | REFERENCE STANDARD | 1 | |
| 194LH | Boeing Standard, 737 PT6 53-30-00:PG5 FIG3 DETAIL3, .072" plates | 1 | |
| 1AE2R19854 | OUTER DIAMETER LOCATION WORKING STANDARD | 1 | |
| 1AE2R19860 | INNER DIAMETER LOCATION WORKING STANDARD | 1 | |
| 1C6345 | CLEARANCE GAGE - TRAN(STANDARD) | 1 | |
| 1TD1133D07001-2001 | Seyer Industries reference standard. Material: 2024-T351 Aluminum...Chamfer EDM Notch Size: .030" x .030" x .005" +/- .002"...Bore EDM Notch Size: .030" x .030" x .005" +/- .002". Includes Test Report and Certificate of Conformance. Part Serial Number:... | 1 | |
| 2-1522 | Pin Protrusion Gauges (Type: Hi-Lok Standard) (Add to cart: Add To Cart) | 2 | |
| 2-1522-B | Pin Protrusion Gauges (Type: Hi-Lok Standard) (Add to cart: Add To Cart) (Type: Hi-Lok Aerospace 'B') (Add to cart: Add To Cart) | 1 | |
| 2-1522-B-2 | Pin Protrusion Gauges (Type: Hi-Lok Standard) (Add to cart: Add To Cart) (Type: Hi-Lok Aerospace 'B') (Add to cart: Add To Cart) (Type: Hi-Lok Large Diameter) (Add to cart: Contact us to order) | 1 | |
| 2-1522HLM | Pin Protrusion Gauges (Type: Hi-Lok Standard) (Add to cart: Add To Cart) (Type: Hi-Lok Aerospace 'B') (Add to cart: Add To Cart) (Type: Hi-Lok Large Diameter) (Add to cart: Contact us to order) (Type: Hi-Lok/Hi-Tigue Metric) (Add to cart: Add To Cart) | 1 | |
| 2-1522HST | Pin Protrusion Gauges (Type: Hi-Lok Standard) (Add to cart: Add To Cart) (Type: Hi-Lok Aerospace 'B') (Add to cart: Add To Cart) (Type: Hi-Lok Large Diameter) (Add to cart: Contact us to order) (Type: Hi-Lok/Hi-Tigue Metric) (Add to cart: Add To Cart) (Ty | 1 | |
| 2-1522HST-2 | Pin Protrusion Gauges (Type: Hi-Lok Standard) (Add to cart: Add To Cart) (Type: Hi-Lok Aerospace 'B') (Add to cart: Add To Cart) (Type: Hi-Lok Large Diameter) (Add to cart: Contact us to order) (Type: Hi-Lok/Hi-Tigue Metric) (Add to cart: Add To Cart) (Ty | 1 | |
| 2-1522HST-B | Pin Protrusion Gauges (Type: Hi-Lok Standard) (Add to cart: Add To Cart) (Type: Hi-Lok Aerospace 'B') (Add to cart: Add To Cart) (Type: Hi-Lok Large Diameter) (Add to cart: Contact us to order) (Type: Hi-Lok/Hi-Tigue Metric) (Add to cart: Add To Cart) (Ty | 1 | |
| 2-1522HSTM | Pin Protrusion Gauges (Type: Hi-Lok Standard) (Add to cart: Add To Cart) (Type: Hi-Lok Aerospace 'B') (Add to cart: Add To Cart) (Type: Hi-Lok Large Diameter) (Add to cart: Contact us to order) (Type: Hi-Lok/Hi-Tigue Metric) (Add to cart: Add To Cart) (Ty | 1 | |
| 2-164-501 | CALIBRATION STANDARD | 4 | |
| 2-164-551 | REFERENCE STANDARD BLOCK | 2 | |
| 2-164-551-2024T3 | Surface Standard with .2, .5 1mm Notches, 2024T3 | 1 | |
| 2-835-01-9301 | Surface Standard with .2, .5, 1mm Notches, 304 Stainless | 2 | |
| 2-835-01-9330 | CALIBRATION STANDARD | 2 | |
| 2-887-01-931-6S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-931-9S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-93135 | REFERENCE STANDARD | 1 | |
| 2-887-01-9313S | CALIBRATION STANDARD - SPLIT - CONICAL | 6 | |
| 2-887-01-9314S | CALIBRATION STANDARD - SPLIT - CONICAL | 5 | |
| 2-887-01-9315S | CALIBRATION STANDARD - SPLIT - CONICAL | 4 | |
| 2-887-01-9316S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-9319S | SPLITTED CONICAL CALIBRATION STANDARD IN 6AL-4V Titanium TYPE SCCS3-7, A318/A319/A320/A321 51-63-06-991-002A. Includes Test Report and Certificate of Conformance. | 3 | |
| 2-887-01-932-1S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-932-3S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-932-5S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-9321S | SPLITTED CONICAL CALIBRATION STANDARD IN 6AL-4V Titanium..TYPE SCCS3-7, A318 51-63-07-991-002A. Includes Test Report and Certificate of Conformance. | 3 | |
| 2-887-01-9323S | SPLITTED CONICAL CALIBRATION STANDARD IN 6AL-4V Titanium..TYPE SCCS3-7, A318 51-63-07-991-002A. Includes Test Report and Certificate of Conformance. | 3 | |
| 2-887-01-9325S | SPLITTED CONICAL CALIBRATION STANDARD IN 6AL-4V Titanium..TYPE SCCS3-7, A318 51-63-07-991-002A. Includes Test Report and Certificate of Conformance. | 3 | |
| 2-887.01-93145 | CALIBRATION STANDARD SPLIT | 1 | |
| 2.837.01 | CRACK STANDARD-NFE | 2 | |
| 2000DD10980-1 | Aluminum CAL Standard, United Airlines Drawing No. 2000DD10980 REV D | 1 | |
| 2000DD10980-3 | Steel CAL Standard, United Airlines Drawing No. 2000DD10980 REV D | 1 | |
| 2000DD10980-5 | Titanium CAL Standard, United Airlines Drawing No. 2000DD10980 REV D | 1 | |
| 20134E | CALIBRATION REFERENCE STANDARD | 1 | |
| 203026-101 | TGB BEVEL GEAR - REFERENCE STANDARD, CALIBRATION RING EWR | 1 | |
| 204-94034-1 | Boeing Reference Standard- Lower Lug APE-1 Primary , D204-12769-6 ASIP Inspection Program. Material: 4340 Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| 2044A | MITUTOYO 2044S STANDARD DIAL INDICATOR 5MM (1MM) | 1 | |
| 2044K44 | STANDARD FLEXIBLE EXTENSION HOSE 36" LENGTH (GREASE GUN HOSE) | 1 | |
| 2044S | Mitutoyo 2044S Standard Dial Indicator 5mm (1mm) | 1 | |
| 2044S-60 | Mitutoyo 2044S-60 Standard Dial Indicator 5mm (1mm) | 1 | |
| 2045S | Mitutoyo 2045S Standard Dial Indicator 5mm (1mm) | 1 | |
| 2046S | Mitutoyo 2046S Standard Dial Indicator 10mm (1mm) | 4 | |
| 2046S-60 | Mitutoyo 2046S-60 Standard Dial Indicator 10mm (1mm) | 1 | |
| 2047S | Mitutoyo 2047S Standard Dial Indicator 10mm (1mm) | 1 | |
| 2052S-19 | MITUTOYO STANDARD TYPE DIAL INDICATOR SERIES 2 | 1 | |
| 208 FRONT SPAR | CESSNA / TEXTRON AVIATION EDDY CURRENT REFERENCE STANDARD 208 FRONT SPAR LOWER CAP. Drawing NO. 2683201 | 1 | |
| 208 REAR SPAR | CESSNA / TEXTRON AVIATION EDDY CURRENT REFERENCE STANDARD 208 REAR SPAR LOWER CAP. Drawing NO. 2683202 | 1 | |
| 208-104 | ENGINE INLET PLUGS, Standard Aero Mod (set of 2) | 1 | |
| 208-106 | EXHAUST PLUG, STANDARD FAIRING | 1 | |
| 208857 | COLD WORKING TOOL STANDARD | 1 | |
| 208EFAY | Set, Socket Driver, Hex, Standard, 1/8" to 3/8" (8 pcs.) | 2 | |
| 208EFTABMY | Set, Socket Driver, Metric, Ball Hex, Standard, 1/4"-3/8" Drive, 3 to 10mm (8 pcs.) | 1 | |
| 208EFTABY | Set, Socket Driver, Ball Hex, Standard, 1/4" -3/8" Drive, 1/8" to 3/8" ( 8 pcs.) | 1 | |
| 208FRDH | 8 PC 3/8" DRIVE STANDARD TORQUE ADAPTOR SET (5/16" - 3/4") | 1 | |
| 209PB | Calibration Standard, CASA CN-235 PT6 55-35-00:PG5 FG3 | 1 | |
| 210EFTAMY | DRIVE METRIC STANDARD HEX BIT SOCKET SET | 1 | |
| 2117404-4 | ECU (STANDARD) | 1 | |
| 211EFAMY | Set, Socket Driver, Metric, Hex, Standard, 4 to 14 mm (11 pcs.) | 1 | |
| 212-93000-0101 | Casa Calibration Standard, No.1, Page 3-3 | 1 | |
| 212-93000-0201 | Casa Calibration Standard, No.2, Page 3-5 | 1 | |
| 212-93000-0301 | Casa Calibration Standard, No.3, Page 3-7 | 1 | |
| 212-93000-0401 | Casa Calibration Standard, No.4, Page 3-9 | 1 | |
| 212-93000-0501 | Casa Calibration Standard,57-10-01 & 57-10-02, No.6 Page 3-15 | 1 | |
| 212-93000-0601 | Casa Calibration Standard,57-10-03, No.7 Page 3-17 | 1 | |
| 212-93000-0701 | Casa Calibration Standard, No.10, Page 3-29 | 1 | |
| 212-93011-0001 | Casa Calibration Standard,57-10-03, No.5 Page 3-11 to 3-14, Use BACR15BB5D8C rivet | 1 | |
| 212-93012-0001 | Casa Calibration Standard,57-10-03, No.8 Page 3-19, Use rivet in Drawer 393 | 1 | |
| 212-93013-0001 | Casa Calibration Standard, No.9, Page 3-25, Use MS20470AD4-5 rivet | 1 | |
| 212-93014-0001 | Casa Calibration Standard, No.11, Page 3-31, FE-PL-52SN = 4130 Steel, L3149-T42 = 2024-T4 | 1 | |
| 212-93015-0001 | Casa Calibration Standard, No.12, Page 3-37, Use MS20470AD4-10 rivet | 1 | |
| 212-A1325-01 | AIRBUS MILITARY REFERENCE STANDARD COM 212-266 PG 13 | 1 | |
| 2124S-10 | Mitutoyo 2124S-10 Standard Dial Indicator 5mm (0.5mm) | 1 | |
| 212EFTAY | 12 PC COMBINATION DRIVE SAE STANDARD HEX DRIVER BIT SOCKET SET (1/16-3/8" | 4 | |
| 212EFTXY | 12 PIECE TORX BIT COMBO UNIT STANDARD SOCKET SET | 2 | |
| 2200ST | STANDARD HEIGHT STEPS | 1 | |
| 22642 | SEMCO® 226242 NO.2 DOUBLE HEAD STANDARD SEALANT REMOVAL SPATULA, PLASTIC, ORANGE, 7-1/4 IN L | 2 | |
| 220538 | PPG Semco 220538 Model 252 Polyethylene 116 Orifice x 2.5 Long x 14 NPT Male Thread Standard Sealant Nozzle | 4 | |
| 220540 | PPG Semco 220540 Model 254 Polyethylene 18 Orifice x 2.5 Long x 14 NPT Male Thread Standard Sealant Nozzle | 1 | |
| 220542 | PPG Semco 220542 Model 410 Polyethylene 132 Orifice x 4 Long x 14 NPT Male Thread Standard Sealant Nozzle | 4 | |
| 220544 | PPG Semco 220544 Model 420 Polyethylene 116 Orifice x 4 Long x 14 NPT Male Thread Standard Sealant Nozzle | 6 | |
| 220548 | PPG Semco 220548 Model 430 Polyethylene 332 Orifice x 4 Long x 14 NPT Male Thread Standard Sealant Nozzle | 4 | |
| 220550 | PPG Semco 220550 Model 440 Polyethylene 18 Orifice x 4 Long x 14 NPT Male Thread Standard Sealant Nozzle | 4 | |
| 220553 | PPG Semco 220553 Model 620 Polyethylene 116 Orifice x 6 Long x 14 NPT Male Thread Standard Sealant Nozzle | 1 | |
| 220555 | PPG Semco 220555 Model 640 Polyethylene 18 Orifice x 6 Long x 14 NPT Male Thread Standard Sealant Nozzle | 1 | |
| 220557 | PPG Semco 220557 Model 820 Polyethylene 116 Orifice x 8 x 14 NPT Male Thread Standard Sealant Gun Nozzle | 2 | |
| 220559 | PPG Semco 220559 Model 840 Polyethylene 18 Orifice x 8 x 14 NPT Male Thread Standard Sealant Gun Nozzle | 1 | |
| 220561 | PPG Semco 220561 Model 1002 Polyethylene 116 Orifice x 10 x 14 NPT Male Thread Standard Sealant Gun Nozzle | 1 | |
| 220563 | PPG Semco 220563 Model 1004 Polyethylene 18 Orifice x 10 x 14 NPT Male Thread Standard Sealant Gun Nozzle | 1 | |
| 220565 | PPG Semco 220565 Model 1010 Polyethylene 516 Orifice x 10 x 14 NPT Male Thread Standard Sealant Gun Nozzle | 2 | |
| 224494 | PPG Semco 224494 Model 650 Polyethylene 38 Orifice x 6 Long x 14 NPT Male Thread Standard Sealant Nozzle | 1 | |
| 228623 | PPG Semco 228623 Model 420 Polyethylene 116 Orifice x 4 Long x 14 NPT Male Thread Standard Sealant Nozzle | 1 | |
| 235302 | Calibration Standard, CASA 57-10-16, PG310, FG304a | 1 | |
| 235303 | Calibration Standard, CASA 57-10-16, PG311, FG304b | 1 | |
| 235502 | Calibration Standard, CN235 PT5 57-10-34:PG510 FIG504b | 2 | |
| 235503 | Calibration Standard, CASA CN-235 PT5 53-10-57:PG507 FG504 | 1 | |
| 235505 | Calibration Standard, CASA CN-235 PT5 57-10-05:PG509 FG504a | 1 | |
| 235507 | Calibration Standard, CASA CN-235 PT5 53-10-56:PG507 FG504 | 1 | |
| 235509 | Calibration Standard, CASA CN-235 PT5 53-20-42:PG512 FG504 | 1 | |
| 235510 | Calibration Standard, CASA CN-235 PT5 57-20-28:PG512 FG504 | 1 | |
| 235511 | Calibration Standard, CASA CN-235 PT5 53-20-32:PG514 FG505b | 1 | |
| 249000 | TOOL, CALIBRATION STANDARD | 1 | |
| 249003 | CALIBRTN, STANDARD 0.01 OHMS | 3 | |
| 1353316 | SOLID COMPOSITE LAMINATE NDI REFERENCE STANDARDS | 1 | |
| 1448170 | CRACK STANDARD-NFE | 1 | |
| 1902510 | STANDARD, TB-S1 7075-T6 | 1 | |
| 1920166 | OLYMPUS REFERENCE STANDARD ALUMINUM 7075-T651 / 7075-T73 | 1 | |
| 1920168 | REFERENCE STANDARD | 1 | |
| 2000180 | EMB100 towbar head for Embraer Phenom 100. 3" O.D. shank is standard. Includes radial & linear shear protection. Compatible towbar(s): TB1, TB2.5, TB3 (w/Reducer), TB125 (w/Reducer) | 1 | |
| 2000194 | G200S "Short" towbar head for Gulfstream G150/G200/G250/G280/Galaxy/Dornier 328/Envoy 3. Nose gear attachment is mounted to a standard -2R shank with radial/linear shear protection incorporated. Compatible towbar(s): TB1, TB2.5, TB3 (w/Reducer), TB125 (w | 1 | |
| 2000285 | EMB300 towbar head for Embraer Phenom 300. 3" O.D. shank is standard. Includes radial & linear shear protection. Compatible towbar(s): TB1, TB2.5, TB3 (w/Reducer), TB125 (w/Reducer) | 1 | |
| 2000412 | ATR42/72 towbar head for all ATR42/72 aircraft. Designed with w/radial & linear shear protection to protect nose gear. TB3 shank is standard. Compatible towbar(s): TB3, TB125. | 1 | |
| 2000420 | ERJ145 towbar head for Embraer ERJ135/145/Legacy series aircraft. 3.25" O.D. shank is standard; can be equipped with 3.0" O.D. shank on request. Includes radial and linear shear protection. Compatible towbar(s): TB1 (w/3" shank), TB2.5 (w/3" shank), TB3, | 1 | |
| 2000468 | G200 towbar head for Gulfstream G150/G200/G250/G280/Galaxy/Dornier 328/Envoy 3. 60" aluminum extension tube with head attachment. Extension allows sufficient clearance under nose of aircraft to use with standard length towbar, eliminating the need for a | 1 | |
| 2001601 | AERO Fokker 50 towbar head. Designed with w/radial & linear shear protection to protect nose gear. TB3 shank is standard. Compatible towbar(s): TB3, TB125. | 1 | |
| 2001887 | Econo crate (open sided crate) for products fitting on standard pallet. Meets ISPM 15 fumigated wood shipping requirements. | 1 | |
| 2002035 | AERO Fokker 70/100 towbar head. Designed with w/radial & linear shear protection to protect nose gear. TB3 shank is standard. Compatible towbar(s): TB3, TB125. | 1 | |
| 2002137 | AERO Global 7000/8000 Towbar Head. Designed with w/radial & linear shear protection to protect nose gear. Custom TB3 shank is standard. Compatible towbar(s): JX, TB125. | 1 | |
| 2002443 | LC100G Galvanized Low Profile Lav Cart. Includes all hoses & couplers required to service aircraft. 68-gallon waste, 36-gallon fill. Honda gas pump system (max 72gpm/54psi), backup hand pump, flow meter included as standard equipment. (prev P/N 001646G) | 1 | |
| 2004049 | 2890 Double LD2/LD3 Dolly. 7000 lb. capacity, handles (2) ea LD2/LD3 or (1) LD8/LD11 container, unit comes standard with 2 WHEEL Ackerman steering. | 1 | |
| 2004853 | Iron Tire Aircraft Flat Tire Dolly. The Iron Tire is a robust aircraft wheel dolly, designed for use on aircraft with a flat tire. The unit allows for easy one-person recovery of a disabled aircraft. Standard features and include: 18,000 lbs (8164kg) tow | 1 | |
| 2020362 | DFS400 Compliance: additional hardware to comply with the DFS400 standard | 1 | |
| 2054399 | Bowers 10-7524 Surface Roughness Standards | 1 | |
| 11030118 | 0.0709 CARBIDE DRILL BIT-1, ( NON-STANDARD ) | 1 | |
| 11030120 | 0.0807 CARBIDE DRILL BIT-1, ( NON-STANDARD ) | 1 | |
| 11030121 | 0.0827 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030124 | 0.0945 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030126 | 0.1024 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030131 | 0.122 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030132 | 0.126 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030134 | 0.1339 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030136 | 0.1417 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030137 | 0.1457 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030138 | 0.1496 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030139 | 0.1535 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030140 | 0.1575 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030142 | 0.1654 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030146 | 0.1811 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030149 | 0.1929 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030151 | 0.2008 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030153 | 0.2087 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030163 | 0.248 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030164 | 0.252 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030168 | 0.2677 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030174 | 0.2913 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030179 | 0.311 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030194 | 0.3701 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030197 | 0.3819 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 14100082 | STANDARD JAW PINCERS | 2 | |
| 150035100 | JECTAIR 3-HP STANDARD, VENTURI AIR MOVER | 2 | |
| 2050503383 | HEAD-STANDARD 90°, 1/16-1/4 COLLET | 2 | |
| 2050503403 | DESOUTTER AH-90-STD-S8 QUICK RELEASE STANDARD HEAD 90DG 5/16-28 UNF | 1 | |
| 2050503433 | DESOUTTER AH-360-STD-S8 QUICK RELEASE STANDARD HEAD 360DG 5/16-28 UNF | 1 | |
| 22112943-007 | 22112943-007;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM FC/PC | 1 | |
| 2214E | NDT REFERENCE STANDARD | 1 | |
| 2285/90.02 | 2285/90.02;Standard Stereo Headset with Volume Control | 1 | |
| 23-55ST | CALIBRATION STANDARD TEST SET | 1 | |
| 2310S-10 | Mitutoyo 2310S-10 Standard Dial Indicator 10mm (1mm) | 1 | |
| 2358S-10 | Mitutoyo 2358S-10 High Resolution Standard Dial Indicator .5" (.01") | 1 | |
| 2414S | Mitutoyo 2414S Standard Dial Indicator .5" (.1") | 3 | |
| 2415S | Mitutoyo 2415S Standard Dial Indicator .5" (.1") | 1 | |
| 25-2007-00 | DEPTH MICROMETER STANDARD | 1 | |
| 2506F | S/B 57-200 Douglas DC-9 Reference Standard 7075-T6 Aluminum. Figure 5, 6,7 | 1 | |
| 2509100213 | STANDARD TOOLS FEELER GAGE | 1 | |
| 18903500000 | PRIME STANDARD LIGHTING REFERENCE | 1 | |
| 2510F | PUMP - VACUUM, PORTABLE, STANDARD DUTY | 1 | |
| 251A | Boeing Standard, 727 PT4 57-30-27:PG4 FIG1 SHEET4 | 1 | |
| 2545B-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY | 1 | |
| 2545B-02 | PUMP - VACUUM,PORTABLE,STANDARD DUTY | 1 | |
| 2545C-02 | PUMP - VACUUM, PORTABLE,STANDARD DUTY 220V, 50 HZ. (WELCH VACUUM TECHNOLOGY INC) | 3 | |
| 2546B-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY | 4 | |
| 2546C-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY | 2 | |
| 2546C-02 | PUMP - VACUUM, PORTABLE,STANDARD DUTY 220V, 50 HZ. (WELCH VACUUM TECHNOLOGY INC) | 5 | |
| 262A | Boeing Standard, 727 PART6 53-10-27, Drawing No. Fig 11 Sheet 7 | 1 | |
| 2683201-1 | REFERENCE STANDARD AY | 2 | |
| 2683301-1 | REFERENCE STANDARD AY | 4 | |
| 27-1-6033 | Fokker 50/60 calibration standard Part 6 53-40-05 pages 7&8 figure 4&5. Material 2024-T3 Aluminum. | 1 | |
| 27-95031-001 | Fairchild METRO 23, Model SA227-CC, METRO 23, Model SA227-DC,Reference standard for inspection of the MLG and NLG Yoke Assembly. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 2724A | PROGRAMMABLE RESISTANCE STANDARD | 1 | |
| 27F-000-212-57-10-1204 | REFERENCE STANDARD FOR DYNAMIC INSPECTION | 1 | |
| 27F-2-212-57-10-1204 | REFERENCE STANDARD FOR DYNAMIC INSPECTION | 1 | |
| 28-0-4225 | STANDARD TOOLS SPRING BALANCE | 1 | |
| 28-0-6034 | Fokker Standard | 1 | |
| 28-0-6035 | Fokker Standard 70/100 PT6 53-10-14 PG 6 FG 5 | 1 | |
| 28-0-6036 | Fokker Standard 70/100 PT6 53-10-15 PG 12 FG 8 | 1 | |
| 28-0-6048-PROTO | Fokker Calibration Standard | 1 | |
| 28-0-6049 | Fokker 70/100 Calibration Standard, Part 6 53-10-18 Page 12 Figure 8. Material: 2024-T351 Aluminum. Paint with Primer. Includes Test Report and Certificate of Conformance. | 1 | |
| 28-04225 | STANDARD TOOLS SPRING BALANCE | 1 | |
| 2803S-10 | Mitutoyo 2803S-10 Standard Dial Indicator .025" (.01") | 1 | |
| 2804S-10 | Mitutoyo 2804S-10 High Resolution Standard Dial Indicator .05" (.01") | 1 | |
| 2805S-10 | Mitutoyo 2805S-10 High resolution Standard Dial Indicator .05" (.01") | 1 | |
| 2870020-001 | EDDY CURRENT STANDARD, WINGLET | 2 | |
| 29-90-114-10 | SCREWDRIVER / STANDARD PRACTICES | 3 | |
| 2902S | Mitutoyo 2902S Standard Reverse Reading Dial Indicator 10mm (1mm) | 1 | |
| 2922S | Mitutoyo 2922S Standard Dial Indicator .125" (.05") | 1 | |
| 2923S-10 | Mitutoyo 2923S-10 High Resolution Standard Dial Indicator .05" (.01") | 1 | |
| 2929S | Mitutoyo 2929S Standard One Revolution Dial Indicator 0.8mm | 1 | |
| 2929S-62 | Mitutoyo 2929S-62 Standard One Revolution Dial Indicator 0.8mm | 1 | |
| 296050002-1 | SKYLOX STANDARD ORANGE | 5 | |
| 296050002-1 | Standard,Orange CB Clip | 5 | |
| 296050003 | Standard, Yellow CB Clip | 1 | |
| 296050029-257 | SKYLOX STANDARD LAVENDER | 1 | |
| 296050029-2825 | SKYLOX STANDARD BLUE | 1 | |
| 296050029-802 | SKYLOX STANDARD GREEN | 1 | |
| 29A028 | STANDARD-CALIBRATION | 4 | |
| 29A029 | STANDARD-CALIBRATION | 5 | |
| 29A029-7075T6 | Surface Standard, Per Airbus A319/320 51-63-01, 7075-T6 Aluminum | 1 | |
| 29A029YS | AIRBUS CALIBRATION STANDARD, A318/A319/A320/A321 51-63-01-991-001-A PB 1 FIG 60 & A350-A-51-90-01-01001-040A-A-NDT 1, 2024-T351 ALUMINUM. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x 0.13mm(.0051") WIDE. Includes Test Report and Certificate of Conformance. | 1 | |
| 29A032 | CALIBRATION STANDARD | 3 | |
| 29A047 | Surface Standard, Per Airbus A319/320 51-63-01, 7075T6 Aluminum | 5 | |
| 29A049 | STANDARD-CALIBRATION | 2 | |
| 29A120 | Surface Standard, Per Airbus A319/320 51-63-01, Magnesium | 2 | |
| 29A49 | AIRBUS REFERENCE STANDARD 3 EDM NOTCH STEEL | 1 | |
| 2KEX-120 | INTAKE/EXHAUST COVERS, Standard Design Strap Type (set of 4) | 1 | |
| 2R19869 | WORKING STANDARD | 1 | |
| 3-212-100-325-WP | UCAS STANDARD WIDE MODEL | 1 | |
| 30 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 30-300 | PlewsLubrimatic 30-300 Standard Duty Pistol Grease Gun | 1 | |
| 30-981-7132 | Sylvac 30-981-7132 Sylcom Software Standard Version Dongle | 1 | |
| 30-981-7232 | Sylvac 30-981-7232 Sylcom Advanced & Standard Bundle | 1 | |
| 30038-0011 | SHACKLE STANDARD | 1 | |
| 3008-550 | TOOL - SCREW REMOVAL (ALSO CALLED A "LESTER" TOOL) (USE WITH STANDARD 1/4" HEXAGON SCREW DRIVER BITS) (MAGNAVON INDUSTRIES INC) | 2 | |
| 301 GUIDE | BOEING REFERENCE STANDARD GUIDE PLATE KC10 FUEL COMPENSATOR CUTOUT-INSPECTION | 1 | |
| 301SS | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 301 STAINLESS . SIZE: 1.5"W x 3.75"L x .25" | 1 | |
| 302 GUIDE | BOEING REFERENCE STANDARD GUIDE PLATE KC10 FUEL COMPENSATOR CUTOUT-INSPECTION | 1 | |
| 304-00005 | STANDARD GAUGE PSI | 4 | |
| 307ESAMY | SOCKET DRIVER SET, METRIC, HEX, STANDARD, 6 TO 19 MM, 7 PCS, MAKE: SNAP ON | 1 | |
| 307ESAY | Set, Socket Driver, Hex, Standard, 5/16" to 3/4" (7 pcs.) | 1 | |
| 309946-0501 | LCR‐100 STANDARD+GC (GYRO COMPASSING OPTIONS) | 3 | |
| 313A/313B | BOEING REFERENCE STANDARD 737 PART 6 53-10-17 PAGE 7 FIGURE 3. 2024-T3 ALUMINUM | 1 | |
| 315W5110-5 | COLOR CHIP STANDARD | 1 | |
| 317P | Boeing Standard, 737 PT6 53-10-16:PG6 FIG3 | 1 | |
| 31A008 | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601. MATERIAL: 4340 STEEL. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance... | 1 | |
| 32-0492-002 | Standard, Cylinder, Landing Gear, B757/767, .375" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 32-0492-004 | Standard, Cylinder, Landing Gear, B757/767, .400" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 32-0492-006 | Standard, Cylinder, Landing Gear, B757/767, .425" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 32-0492-008 | Standard, Cylinder, Landing Gear, B757/767, .450" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 32-0492-010 | Standard, Cylinder, Landing Gear, B757/767, .475" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 32-0492-012 | Standard, Cylinder, Landing Gear, B757/767, .500" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 320008B | TIRE DEFLATOR- STANDARD/SMALL BORE | 7 | |
| 320008B-S0 | Tire Deflator- Standard/Small Bore | 3 | |
| 320008B-SO | TIRE DEFLATOR- STANDARD/SMALL BORE | 3 | |
| 32244-TH | 1/2DR STANDARD SKT 12PT 1-3/8 | 1 | |
| 323A | Boeing Standard, 737 PT4 55-50-01:PG5 FIG1 | 1 | |
| 323B | Boeing Standard, 737 PT4 55-50-01:PG6 FIG2 | 1 | |
| 3252LMT | STANDARD MAGNETIC NEEDLE | 1 | |
| 328A | Boeing Reference standard 737 pt 6 53-10-38 | 1 | |
| 328A/328B | BOEING REFERENCE STANDARD 737 PART 6 53-10-38 FIGURE 2 PAGE 7. | 1 | |
| 328AB | Boeing Reference Standard 737 PT6 53-10-38 | 1 | |
| 328B | Boeing Reference standard, 737, pt 6 53-10-38 | 1 | |
| 328C | Boring Reference Standard, PT6 53-10-38 | 1 | |
| 328C/328D | BOEING REFERENCE STANDARD 737 PART 6 53-10-38 FIGURE 3 PAGE 8. | 1 | |
| 328CD | Boeing Reference Standard, 737 pt 6 53-10-38 | 1 | |
| 328D | Boeing Reference Standard, PT6 53-10-38 | 1 | |
| 328JET-SE.4.44 | Calibration Standard, 328JET PT6 51-60-01:PG9/10 FIG605 | 1 | |
| 33-725 | 25' POWERLOCK TAPE MEASURE WITH BOTH STANDARD AND METRIC MARKINGS. | 1 | |
| 33-B-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) | 1 | |
| 330-400 | BLADE COVERS, STANDARD TYPE (set of 3) | 1 | |
| 330A91-5805-03 | AIR INTAKE STANDARD SLING | 1 | |
| 332A91-5805-00 | AIR INTAKE STANDARD SLING | 1 | |
| 332A91‐5806‐01 | AIR INTAKE STANDARD SLING | 1 | |
| 336A | Boeing Standard, 737 PT6 57-30-02: PG5 FIG2 | 1 | |
| 336B | Boeing Standard, 737 PT6 57-30-02: PG5 FIG2 | 1 | |
| 338A | Boeing Standard, 737 PT6 53-10-35:PG6 FIG1 | 1 | |
| 338B | Boeing Standard, 737 PT6 53-10-35:PG6 FIG1 | 1 | |
| 341 | BOEING REFERENCE STANDARD 737 PART 4 53-10-40 FIGURE 1 PAGE 4. Includes Test Report and Certificate of Conformance. | 1 | |
| 345 | Reference Standard | 1 | |
| 348-3666 | KNIPEX VDO Standard tool set | 1 | |
| 349 | Reference Standard 349 | 1 | |
| 35-92106-0001 | STANDARD TOOLS KIT | 1 | |
| 35-92133-0001 | ENGINE AND STRUCTURE STANDARD TOOL KIT | 1 | |
| 350 | Reference Standard | 1 | |
| 351A | Boeing Standard, 737 PT6 53-10-01:PG6 FIG2 | 1 | |
| 351B | Boeing Standard, 737 PT6 53-10-01:PG7 FIG3 | 1 | |
| 353ABC | Boeing Standard, 737 PT6 53-10-12:PG7 FIG2 | 1 | |
| 353D | Boeing Standard, 737 PT6 53-10-12:PG9 FIG4 | 2 | |
| 354A | Boeing Standard, 737 PT6 57-30-04: PG4 FIG1 SHT1 - .325/.500 | 4 | |
| 354B | Boeing Standard, 737 PT6 57-30-04: PG4 FIG1 SHT1 - .400/.600 | 1 | |
| 354C | Boeing Standard, 737 PT6 57-30-04: PG4 FIG1 SHT1 - .322/.700 | 1 | |
| 355A | Boeing Standard, 737 PT6 57-30-04: PG4 FIG1 SHT1 - .322/.600 | 1 | |
| 355A95-7500-00 | AIR HYDRAULIC TOOL KIT / HYDRAULIC ACCESSORY ASSEMBLY AS350 / AS355 STANDARD | 1 | |
| 355B | Boeing Standard, 737 PT6 57-30-04: PG4 FIG1 SHT1 - .300/.600 | 1 | |
| 355C | Boeing Standard, 737 PT6 57-30-04: PG4 FIG1 SHT1 - .316/.750 | 1 | |
| 356 | BOEING REFERENCE STANDARD 737 53-30-04 PART 6 PAGE 4 FIGURE 1. Includes test report and Certificate of Conformance. | 9 | |
| 356 BOEING | Reference Standard | 1 | |
| 3600-25 | ULTRA LIGHT AIR HOSE ( INNER DIAMETER: 1/4" )( MAXIMUM WORKING PRESSURE: 300 PSI )( OUTER DIAMETER: .472" )( OVERALL LENGTH: 25' (7.6 M) )( TYPE: STANDARD HOSE ) | 1 | |
| 3600-50 | ULTRA LIGHT AIR HOSE ( INNER DIAMETER: 1/4" )( MAXIMUM WORKING PRESSURE: 300 PSI )( OUTER DIAMETER: .472" )( OVERALL LENGTH: 50' (15.2 M) )( TYPE: STANDARD HOSE ) | 1 | |
| 363 | BOEING REFERENCE STANDARD PART 6 53-30-03 FIGURE 1 PAGE 6. Includes Test Report and Certificate of Conformance. | 5 | |
| 365 | Reference Standard | 6 | |
| 367 | Reference Standard | 4 | |
| 368 | Reference Standard | 1 | |
| 3688-04 | HELICOIL STANDARD INSERT 3B GO-HI GAGE | 1 | |
| 369 | Reference Standard | 2 | |
| 3694-3 | HELICOIL STANDARD INSERT 3B TGREAD GO-HI GAGE | 1 | |
| 3694-5 | HELICOIL STANDARD THREAD GO-HI GAGE | 1 | |
| 3694-6 | HELICOIL STANDARD INSERT 3B THREAD GO-HI GAGE | 1 | |
| 370 | Reference Standard | 1 | |
| 370-.036/.036 | BOEING STANDARD, 737 PT4 53-30-02:PG5 FIG1, .036 TOP AND BOTTOM SHEET | 1 | |
| 375 | BOEING REFERENCE STANDARD 737 PT 4 55-10-02. Includes Test Report and Certificate of Conformance. | 3 | |
| 378 | BOEING REFERENCE STANDARD 737 PT 6 53-10-44 PAGE 5 FIGURE 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 378:383 | Boeing Standard, 737 PT6 53-30-04:PG10 FIG2 | 1 | |
| 383 | BOEING REFERENCE STANDARD 737 PART 6 53-30-07 FIGURE 2 PAGE 7. Includes Test Report and Certificate of Conformance. | 2 | |
| 384AB | Reference Standard | 1 | |
| 386B | Eddy current standard | 1 | |
| 389C | Eddy current standard | 1 | |
| 39DLP | "DIGITAL ULTRASONIC THICKNESS GAGE WITH WAVEFORM VERIFICATION AND INTERNAL DATALOGGER. STANDARD KIT INCLUDES: CARRYING CASE, USB MANUAL, GAGEVIEW INTERFACE PROGRAM, USB CABLE, LITHIUMION RECHARGEABLE BATTERY " | 1 | |
| 4-1-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 1 | |
| 4-125STD | GROUND POWER UNIT - STANDARD, ELECTRICAL - 125 KVA, 400 HZ - DIESEL POWERED - NBPT MODULE AVAILABLE | 1 | |
| 4-2-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 1 | |
| 4-3-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 2 | |
| 4-4-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 2 | |
| 4-90STD | GROUND POWER UNIT - STANDARD - ELECTRICAL - 90 KVA, 400 HZ - DIESEL POWERED - NBPT MODULE AVAILABLE | 1 | |
| 4.1MM | 0.1614 CARBIDE COMPOSITE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 40-42A30 | Bowers 40-42A30 Ball Anvil Standard Steel M2.5mm Thread | 1 | |
| 40-42A31 | Bowers 40-42A31 Ball Anvil Standard Carbide M2.5mm Thread | 1 | |
| 4000KIT | STANDARD DG KIT | 6 | |
| 401 | BOEING REFERENCE STANDARD 747 PT 4 57-10-01 Page 4 Figure 1. Includes Test Report and Certificate of Conformance. | 2 | |
| 402 | BOEING REFERENCE STANDARD 747 PT 4 57-10-04 Page 5 Figure 1. Includes Test Report and Certificate of Conformance. | 2 | |
| 403 | BOEING REFERENCE STANDARD PT 4 57-10-04 FIG 2, PAGE 6. Includes Test Report and Certificate of Conformance. | 1 | |
| 404 | BOEING 747 REFERENCE STANDARD PART 6 57-10-08 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | 5 | |
| 405 | BOEING REFERENCE STANDARD 747 PT 4 57-10-02 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 406 | BOEING REFERENCE STANDARD 747 PT 6 57-10-09 Page 6 Figure 2. Includes Test Report and Certificate of Conformance. | 12 | |
| 4004 | Boeing Standard, 747 PT4 53-40-01:FIG6 PG10 | 4 | |
| 4028 | Boeing Standard, 747 PT4 57-40-03:PG6 FIG3 | 4 | |
| 4029 | BOEING REFERENCE STANDARD 747 PART 4 55-50-01 FIGURE 1 PAGE 4.MATERIAL: 2024-T3 or 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 4036 | Boeing Standard, 747 PT4 57-40-05:PG4 FIG2 | 7 | |
| 4057 | Boeing Standard, 747 PT6 53-30-02:PG4 FIG1 | 2 | |
| 4059 | Boeing Standard, 747 PT6 57-10-12: FIG1 PG5 | 2 | |
| 40120 | STANDARD SOCKET 5/8" | 1 | |
| 40122 | STANDARD SOCKET 11/16" | 1 | |
| 40132 | STANDARD SOCKET 25MM | 1 | |
| 402-190.73 | 402-190.73;4x50GE - 802.3cd - PAM4 - QSFP56 - Standard License | 1 | |
| 402-620.73 | 402-620.73;FlexE 4x100GBASE-R PHY with client size up to 100G - Standard License | 1 | |
| 402-810.72 | 402-810.72;Advanced Error Analysis - Module Standard License | 1 | |
| 402-820.72 | 402-820.72;100G Ethernet FEC Validation - Module Standard License | 1 | |
| 402-822.72 | 402-822.72;50GE Ethernet FEC Validation - Module Standard License | 1 | |
| 402-864.72 | 402-864.72;FlexE 100G Ethernet FEC Validation - Module Standard License | 1 | |
| 402-868.72 | 402-868.72;FlexE Management Channel Test - Module Standard License | 1 | |
| 40216 | STANDARD SOCKET 1/2" | 1 | |
| 40317 | STANDARD SOCKET 17MM | 1 | |
| 40318 | STANDARD SOCKET 18MM | 1 | |
| 40319 | STANDARD SOCKET 19MM | 1 | |
| 4032-1 | STANDARD SOCKET 21MM | 2 | |
| 4032-2 | STANDARD SOCKET 22MM | 1 | |
| 4032-3 | STANDARD SOCKET 23MM | 1 | |
| 4036G | Boeing Standard, 747 PT4 57-40-05:PG4 FIG2 | 1 | |
| 403A | Boeing Standard, 747 PT 4 57-10-04: PG6 FIG2 | 1 | |
| 403A/403B | BOEING REFERENCE STANDARD 747 PT 4 57-10-04 Page 6 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 403B | Boeing Standard, 747 PT 4 57-10-04: PG6 FIG2 | 1 | |
| 40533 | STEP STANDARD-STAIR ASSEMBLY | 1 | |
| 40547 | Forschner® Honeycomb Knife (Type: Standard) (Overall length: 10-1/4" (260 mm)) (Add to cart: This item is temporarily unavailable.) | 1 | |
| 4062A | Boeing Standard, 747 PT 6 57-10-23: PG4 FIG1 | 2 | |
| 4062B | Boeing Standard, 747 PT 6 57-10-23: PG4 FIG1 | 1 | |
| 4062C | Boeing Standard, 747 PT 6 57-10-23: PG4 FIG1 | 1 | |
| 408 | BOEING REFERENCE STANDARD PT 4 57-10-03 FIG 2, PAGE 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 410 | BOEING REFERENCE STANDARD 747 PT 4 57-10-05 Page 6 Figure 3. Includes Test Report and Certificate of Conformance. | 4 | |
| 41034G02 | DAVID CLARK (DC) CLAA99- 14CRG 4-BAY BATTERY CHARGER FOR 9900/9100 SYSTEM BATTERIES. THE 4- BAY BATTERY CHARGER (CLAA99- 14CRG) REQUIRES A STANDARD 110V CORD WITH A THREE-PRONG PLUG FOR CHARGING | 3 | |
| 411 | BOEING REFERENCE STANDARD PT 6 55-10-04 FIG 1, PAGE 4. Includes Test Report and Certificate of Conformance. | 1 | |
| 412 | BOEING REFERENCE STANDARD PT 6 55-10-01 FIG 1, PAGE 3. Includes Test Report and Certificate of Conformance. | 1 | |
| 412B5MHZ35R80FE | CUSTOM 5MHz 35° TRANSVERSE WAVE TRANSDUCER WITH END MOUNT MICRODOT CONNECTOR WIT A 80mm RADIUS. USED WITH AIRBUS REFERENCE STANDARD PART NUMBER 98A54003096 Includes Test Report and Certificate of Conformance. REFERENCE: AIRBUS A300-600 PART 4 54-50-20 | 1 | |
| 412B5MHZ40R75FE | CUSTOM 5MHz 40° TRANSVERSE WAVE TRANSDUCER WITH END MOUNT MICRODOT CONNECTOR WIT A 75mm RADIUS. USED WITH AIRBUS REFERENCE STANDARD PART NUMBER 98A54003069 Includes Test Report and Certificate of Conformance. REFERENCE: AIRBUS A300-600 PART 4 54-50-20 | 1 | |
| 412E5MHZ60FE | CUSTOM 5MHz 60° IN FE TRANSVERSE WAVE BACKSHOOTING TRANSDUCER WITH A SIDE MOUNTED MICRODOT CONNECTOR. CASE SIZE: .690" x .354" x .354 Includes Test Report and Certificate of Conformance. REFERENCE STANDARD: 98A54003077 | 1 | |
| 423 | BOEING 747 REFERENCE STANDARD PART 6 57-10-17 FIGURE 2 PAGE 8. Includes Test Report and Certificate of Conformance. | 3 | |
| 424 | BOEING 747 REFERENCE STANDARD PART 6 57-10-17 FIGURE 3 PAGE 9. Includes Test Report and Certificate of Conformance. | 3 | |
| 426 | BOEING REFERENCE STANDARD PT 4 55-10-01 FIG 1, PAGE 4. Includes Test Report and Certificate of Conformance. | 1 | |
| 431 | BOEING REFERENCE STANDARD PT 6 53-10-19 FIG 1, PAGE 6. Includes Test Report and Certificate of Conformance. | 3 | |
| 432 | BOEING REFERENCE STANDARD 747 PT 6 57-30-02 Page 4 Figure 1. Includes Test Report and Certificate of Conformance. | 1 | |
| 435 | BOEING 747 REFERENCE STANDARD PART 6 57-10-20 FIGURE 3 PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| 436 | BOEING 747 REFERENCE STANDARD PART 6 57-10-20 FIGURE 4 PAGE 8. Includes Test Report and Certificate of Conformance. | 3 | |
| 437 | BOEING REFERENCE STANDARD 747 53-10-01 PART 4 PAGE 11 FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 438 | BOEING REFERENCE STANDARD 747 53-10-01 PART 4 PAGE 11 FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 439 | BOEING 747 REFERENCE STANDARD PART 6 57-10-22 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | 2 | |
| 440 | BOEING REFERENCE STANDARD 747 PT 4 57-10-11 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 441 | BOEING REFERENCE STANDARD 747 PT 4 57-10-10 Page 9 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 442 | BOEING REFERENCE STANDARD PT 4 53-10-02 FIG 2, PAGE 5. Includes Test Report and Certificate of Conformance. | 2 | |
| 443 | BOEING REFERENCE STANDARD PT 4 53-10-02 FIG 2, PAGE 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 446 | BOEING REFERENCE STANDARD 747 PT 4 57-10-13 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 447 | BOEING REFERENCE STANDARD 747 PT 4 57-10-13 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 448 | BOEING REFERENCE STANDARD 747 PT 4 57-10-13 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | 3 | |
| 449 | BOEING REFERENCE STANDARD 747 PT 4 57-10-13 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 460 | BOEING REFERENCE STANDARD 747 PART 6 57-10-28, PAGE 3 FIGURE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| 471 | BOEING REFERENCE STANDARD 747 PT 4 57-30-02 Page 4 Figure 1. Includes Test Report and Certificate of Conformance. | 5 | |
| 474 | BOEING REFERENCE STANDARD PT 6 53-10-20 FIG 1, PAGE 5. Includes Test Report and Certificate of Conformance. | 2 | |
| 475 | BOEING 747 REFERENCE STANDARD PART 6 57-10-27 FIGURE 1 PAGE 4. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 5 | |
| 476 | BOEING REFERENCE STANDARD PT 6 53-10-18 FIG 3, PAGE 6. Includes Test Report and Certificate of Conformance. | 1 | |
| 477 | BOEING REFERENCE STANDARD PT 6 53-10-18 FIG 3, PAGE 6. Includes Test Report and Certificate of Conformance. | 1 | |
| 478 | BOEING REFERENCE STANDARD PT 6 5-10-18 FIG 3 PAGE 6. Includes Test Report and Certificate of Conformance. | 1 | |
| 482 | BOEING 747 REFERENCE STANDARD PART 6 55-10-08 FIGURE 3 PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| 483 | BOEING 747 REFERENCE STANDARD PART 6 55-10-08 FIGURE 3 PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| 484 | BOEING 747 REFERENCE STANDARD PART 6 55-10-25 FIGURE 1 PAGE 4. Includes Test Report and Certificate of Conformance. | 2 | |
| 490 | BOEING REFERENCE STANDARD 747 PT 4 57-30-06 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 497 | BOEING REFERENCE STANDARD 767 PT 6 53-00-05 FIG 1. Includes Test Report and Certificate of Conformance. | 2 | |
| 506 | BOEING REFERENCE STANDARD 757 PT 4 57-40-01 FIG 3 Includes Test Report and Certificate of Conformance. | 4 | |
| 602 | BOEING REFERENCE STANDARD 767 PT 4 32-10-01 FIG 2 Includes Test Report and Certificate of Conformance. | 1 | |
| 603 | BOEING REFERENCE STANDARD 767 PT 4 55-10-01 FIG 1. Includes Test Report and Certificate of Conformance. | 1 | |
| 605 | BOEING REFERENCE STANDARD 767 PT 6 22-10-01 FIG 2. Includes Test Report and Certificate of Conformance. | 4 | |
| 608 | BOEING REFERENCE STANDARD 767 PT 4 27-80-01 FIG 4 Includes Test Report and Certificate of Conformance. | 1 | |
| 610 | BOEING REFERENCE STANDARD 767 PT 4 32-20-01 FIG 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 4065 | Boeing Standard 747 53-30-08 PT 6 PG 7 | 1 | |
| 4066 | Boeing Standard, 707 PT6 53-30-07 FIG8 PG67 SHEET5 | 1 | |
| 4068 | Boeing Standard 747 53-30-09 PT6 PG3 | 1 | |
| 4070 | Boeing Standard, 747 PT6 53-30-07:PG4 FIG1 | 1 | |
| 4072 | BOEING REFERENCE STANDARD 747 PT 6 53-30-05. Material 2024-T3 Aluminum. Fasteners BACR15CE5D5, BACR15CE6D5. Includes Test Report and Certificate of Conformance. | 1 | |
| 4074 | Boeing Standard, 747 PT4 54-40-02:PG17 FIG4 | 1 | |
| 4075 | Boeing Standard, 747 PT4 54-40-02:PG18 FIG5 | 1 | |
| 4084 | Boeing Standard, 747 PT4 54-40-02:PG19 FIG6 | 1 | |
| 4711 | CAPACITER STANDARD | 1 | |
| 5135 | STANDARD OILERS 500ML (FOR LUB) | 1 | |
| 5300 | SYNCHRO/RESOLVER STANDARD | 1 | |
| 5414 | TORQUE SCREWDRIVER VALVE CORE DRIVER WITH PRESET TORQUE TO TIRE & RIM STANDARDS | 7 | |
| 7300 | DINITROL ACS, STANDARD KIT | 1 | |
| 7374 | EDDY CURRENT BOLT HOLE STANDARD BLOCK (7075-T6 ALUMINUM) | 1 | |
| 40712 | SOCKET, SOCKET SIZE 13 MM, 6-POINT, ALLOY STEEL, CHROME, STANDARD, HAND | 2 | |
| 45223 | T-CUTTER - STANDARD | 2 | |
| 50000 | ACF-50 HANDHELD SPRAY SYSTEM OR ACF-50 STANDARD PUMP SPRAY SYSTEM-50000 OR 50003 | 1 | |
| 50003 | ACF-50 HANDHELD SPRAY SYSTEM OR ACF-50 STANDARD PU | 3 | |
| 57309 | 57309;Cable; polarized BNC to standard BNC / 55-0605-16 | 1 | |
| 59270 | K1-zert Reference Standard No.1 | 1 | |
| 64440 | "BOMBILLA PARA PAPI 50W 12V MOD HALOSTAR STAR STANDARD" | 1 | |
| 70385 | Cotton Fiber Mounted Point Test Kits (Description: 13 PC Mini Assortment) (Spindle: 1/8") (Add to cart: Add To Cart) (Description: 13 PC Standard Assortment) (Spindle: 1/4") (Add to cart: Add To Cart) | 2 | |
| 416161 | SAFT STANDARD BATTERY MAINTENANCE TOOL KIT | 9 | |
| 418W1017-20 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 8 | |
| 419115 | Henkel 985088 LOCTITE Hot Melt Applicators 98030, 98035, 98036, 98040, 916268 Standard AdapterCheck Valve | 1 | |
| 43-1352 | STANDARDIZATION BOLT | 1 | |
| 43-1392 | STANDARDIZATION BOLT | 1 | |
| 4340-3-0050 | DC9 REFERENCE STANDARD S/B 57-118 SERVICE SKETCH 2671 SHEET 4 OF 7. MATERIAL: 4340 STEEL. | 1 | |
| 45-123 | T-CUTTER (STANDARD) | 12 | |
| 45-128 | Custom 8 Hole Calibration Standard Test Coupon Assembly Figure 5 Page 10 to include the following Pieces. Figure 2 Page 7. Material .071" 2024-T3 Clad Aluminum, 7 EDM Flaws total. Figure 3 Page 8 .250" 4130or4340 Steel 0 EDM Flaws total and Figure 4... | 2 | |
| 45-128-1 | Custom 8 Hole Calibration Standard Test Coupon. Figure 1 Page 7. Material .071" 2024-T3 Clad Aluminum. 7 EDM Flaws total. | 1 | |
| 45-128-2 | Custom 8 Hole Calibration Standard Test Coupon. Figure 3 Page 8. Material .250" 4130/4340 Steel. 0 EDM Flaws total. | 1 | |
| 45-128-3 | Custom 8 Hole Calibration Standard Test Coupon. Figure 4 Page 9. Material .125" 2024-T3 Clad Aluminum. 0 EDM Flaws total. | 1 | |
| 45-403 | Ringer Cable Stripper Standard No Blade | 5 | |
| 455-9100 | ELT TEST SET (ETS) - STANDARD | 13 | |
| 457A | CALIBRATION STANDARD, C130 SMP 515-C-NDI 20-40-00:FIG6 PG8 | 1 | |
| 45MG | THRU-COAT ;STANDARD | 1 | |
| 46-081 | Rivet Fan Spacing Tools (Type: Mini) (Number of fingers: 10) (Spacing range: 1/2 Closed to 2" Open) (Overall length (open): 18" (46 cm)) (Add to cart: Add To Cart) (Type: Standard) (Number of fingers: 20) (Spacing range: 1/2 Closed to 2" Open) (Overall le | 5 | |
| 4708T | PROTO 1/4'' 12-POINT SAE STANDARD SOCKET | 1 | |
| 478554 | Henkel 984261 LOCTITE Standard Cartridge to Nozzle Adapter for 300 mL Cartridges | 1 | |
| 47A010 | CONDUCTIVITY REFERENCE STANDARD | 1 | |
| 47A023 | STANDARD-CONDUCTIVITY | 1 | |
| 485A | Boeing Standard 747 PT6 53-10-23 FG 3 PG 8 | 1 | |
| 485B | Boeing Standard 747 PT6 53-10-23 FG 3 PG 8 | 1 | |
| 49-TD1 | DIAMOND PLATED TWIST DRILLS 1/8 DIA. STANDARD GRIT | 1 | |
| 49-TD2 | DIAMOND PLATED TWIST DRILLS 1/4 DIA. STANDARD GRIT | 1 | |
| 49-TD3 | DIAMOND PLATED TWIST DRILLS 3/8 DIA. STANDARD GRIT | 1 | |
| 49-TD4 | DIAMOND PLATED TWIST DRILLS 7/16 DIA. STANDARD GRI | 1 | |
| 49-TD5 | DIAMOND PLATED TWIST DRILLS 1/2 DIA. STANDARD GRIT | 1 | |
| 49-TD6 | DIAMOND PLATED TWIST DRILLS 5/8 DIA. STANDARD GRIT | 1 | |
| 49-TD7 | DIAMOND PLATED TWIST DRILLS 3/4 DIA. STANDARD GRIT | 1 | |
| 49-TD8 | DIAMOND PLATED TWIST DRILLS 7/8 DIA. STANDARD GRIT | 1 | |
| 49-TD9 | DIAMOND PLATED TWIST DRILLS 1 DIA. STANDARD GRIT 4 | 1 | |
| 50 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 505-03439-403 | SENSITIVITY SETTING STANDARD | 1 | |
| 51-60-00-AL2024-.040 | Airbus Standard, A330 PT6 53-21-36:PG637 FIG620, ATR72 PT6 51-60-00 PG 631 FG 617, .040 2024-T3 | 1 | |
| 51-60-00-AL2024-.063 | Airbus Standard, A330 PT6 53-21-36:PG637 FIG620, ATR72 PT6 51-60-00 PG 631 FG 617, .063 2024-T3 | 1 | |
| 51-60-00-AL2024-.083 | Airbus Standard, A330 PT6 53-21-36:PG637 FIG620, ATR72 PT6 51-60-00 PG 631 FG 617, .083 2024-T3 | 1 | |
| 51-60-00-AL2024-.120 | Airbus Standard, A330 PT6 53-21-36:PG637 FIG620, ATR72 PT6 51-60-00 PG 631 FG 617, .120 2024-T3 | 1 | |
| 51-60-00-AL2024-.160 | Airbus Standard, A330 PT6 53-21-36:PG637 FIG620, ATR72 PT6 51-60-00 PG 631 FG 617, .160 2024-T3 | 1 | |
| 51-60-00-AL2024-.200 | Airbus Standard, A330 PT6 53-21-36:PG637 FIG620, ATR72 PT6 51-60-00 PG 631 FG 617, .200 2024-T3 | 1 | |
| 513-404E | MITUTOYO DIAL TEST INDICATOR STANDARD 0.8 MM | 1 | |
| 515-721 | Mitutoyo 515-721 - Standard Accuracy Check Master 0-450mm | 1 | |
| 515-722 | Mitutoyo 515-722 - Standard Accuracy Check Master 0-600mm | 1 | |
| 515-723 | Mitutoyo 515-723 - Standard Accuracy Check Master 0-1000mm | 1 | |
| 5163A42 | WRENCH:COMBINATION STANDARD SET IN METRIC TOOLS - HAND / POWER :10 PIECE INCH WRENCH SET 1/4" - 3/4" ORDER PN 5163A43 FROM MCMASTER- CARR MANUFACTURER PART NUMBER (M) - 5163A42; MANUFACTURER (MA) - ARMSTRONG; VENDOR/SUPPLIER PART NUMBER (VN) - 5163A42 | 1 | |
| 5163A43 | WRENCH SET:COMBINATION TYPE:RATCHETING BOX SIZE:3/8 INCH - 3/4 INCH OPEN SIZE:3/8INCH - 3/4INCH STYLE:12- POINT MATL:CHROME PLATED NUMBER OF PIECES:10 PIECES CONT:PLASTIC WRENCH:COMBINATION STANDARD SET IN INCHES TOOLS - HAND / POWER :STANDARD SET IN INCH | 1 | |
| 5290020-4 | Cessna Model 401/402 Calibration Standard Figure 4 part 2 & 3 Inspection. Plate A - 7075-T6 Aluminum and Plate B - 2024-T3 Aluminum. | 1 | |
| 5290024-1 | CESSNA CALIBRATION REFERENCE STANDARD | 1 | |
| 53-10-00-250-805-AE1 | CALIBRATION STANDARD | 1 | |
| 53-10-087/1 | Calibration Standard, BAe 4100 PT6 53-10-87:PG8 FIG4 | 1 | |
| 53-10-110A | Raytheon 125 Series Calibration Standard. Material: 4340 Cres Steel. Includes Test Report and Certificate of Conformance. | 2 | |
| 53-10-110A/1 | Raytheon Calibration Standard, 125 Series, 53-10-110A Fig 2 | 1 | |
| 53-10-110A/2 | Raytheon Calibration Standard, 125 Series, 53-10-110A Fig 2 | 1 | |
| 53-10-126/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-0126/1 PT 6 FIGURE 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-10-130/158/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-01 PT 6 FIGURES 5&6 PAGES 10&11. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-10-137 | BAE 146-RJ SERIES REFERENCE STANDARD SET OF 8 UNITS, 53-10-12 PT 6 FIGURE 7 PAGES 907-910. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-10-153/155/175/193/194/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-08 PT 6 FIGURES 5&6 PAGES 9&10. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-10-153/155/175/194/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-06 PT 6 FIGURES 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-10-192/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-25 PT 6 FIGURES 6&7 PAGES 10&11. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-1043-500 | Delta Fuselage Skin Reference Standard | 1 | |
| 53-1043-508 | Delta Fuselage Skin Reference Standard | 1 | |
| 53-1043-510 | Delta Fuselage Skin Reference Standard | 1 | |
| 53-1043-512 | Delta Fuselage Skin Reference Standard | 1 | |
| 53-1043-514 | Delta Fuselage Skin Reference Standard | 1 | |
| 53-20-104/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-00-86 PT 6 FIGURES 7&8 PAGES 14&15. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-140A/1 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 53-20-26 PG 10 FIG 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-140A/2 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 53-20-26 PG 10 FIG 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-145/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-20-03 PT 6 FIGURE 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-148/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-20-01 PT 6 FIGURES 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-149/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-20-65 PT 6 FIGURE 11&12 PAGES 16&17. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-155/1/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-36 PT 6 FIGURES 7&8 PAGES 13&14. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-155/1/2 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-36 PT 6 FIGURES 9&10 PAGES 15&16. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-155/1/3 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-36 PT 6 FIGURES 11&12 PAGES 17&18. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-155/1/4 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-36 PT 6 FIGURES 13&14 PAGES 19&20. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-157/2 | BAE 146-RJ SERIES REFERENCE STANDARD 53-20-84 PT 6 FIGURE 8 PAGE 12. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-165/2 | RADIUSED ULTRASONIC PROBE SHOE USED WITH K5K AND REFERENCE STANDARD 53-20-165/1 (BAe 146 Series) | 1 | |
| 53-20-167/1 | BAE REFERENCE STANDARD 146-RJ 53-238 53-20-21 PT 4 FIGURE 4 PAGE 519. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-169/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-20-21 PT 4 FIGURE 3 PAGES 505. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-169/2 | BAE 146-RJ SERIES REFERENCE STANDARD 53-20-21 PT 4 FIGURE 3 PAGES 505. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-171/1 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 53-20-21 PG 512 FIG 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-171/2 | RADIUSED ULTRASONIC PROBE SHOE USED WITH K5K(AFC-525-7S) AND REFERENCE STANDARD 53-20-165/1 (BAe 146 Series). Includes Certificate of Conformance. | 1 | |
| 53-20-179/2 | BAE 146-RJ SERIES REFERENCE STANDARD 53-30-14 PT 6 FIGURE 5&6 PAGES 10&11. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-180/3 | BAE REFERENCE STANDARD 146-RJ 53-20-88 FIG 4&5, PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-205 | OFFSET RIVET GUN SET 5PC MIX UNIV. STANDARD 'L" 3-1/2" .401 | 2 | |
| 53-30-126/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-30-02 PT 6 FIGURE 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-30-131/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-30-01 PT 6 FIGURE 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-30-174/177/179/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-30-03 PT 6 FIGURE 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-30-174/177/179/2 | BAE 146-RJ SERIES REFERENCE STANDARD 53-30-04 PT 6 FIGURE 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-40-125/1 | BAE REFERENCE STANDARD 146-RJ 53-238 53-40-06 PT 6 FIGURE 5&6 PAGES 9&10. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-41-04-991-002-A | Airbus Reference standard 53-41-04-991-002-A Sheet 01 part 6 page 11. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-80-I01F-1 | REFERENCE STANDARD | 1 | |
| 53-80-I01F-2 | REFERENCE STANDARD | 1 | |
| 530G12406-1-3 | CALIBRATION STANDARDS-STEEL | 1 | |
| 531195T01R00 | TOOLKIT STANDARD-STRUCTURAL REPAIR | 1 | |
| 5420M | STANDARD SOCKET 20MM | 1 | |
| 545-020 | STANDARD TIP | 1 | |
| 546C-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY | 1 | |
| 55-1987 | Ergo-Elite Stripmaster Standard, 16-26 AWG. | 3 | |
| 55-31-105/1 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 55-31-42 PG 7 FIG 3. Includes Test Report and Certificate of Conformance. | 1 | |
| 55-31-109/2 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 55-31-43 PG 8 FIG 4. Includes Test Report and Certificate of Conformance. | 1 | |
| 55-31-NDT 1 | BAE REFERENCE STANDARD 146-RJ 53-238 55-20-11 PT 6 FIGURE 5 PAGE 9. Includes Test Report and Certificate of Conformance. | 1 | |
| 55-31NDT1 | NDT REFERENCE STANDARD | 1 | |
| 55-33-101/1 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 55-33-10 PG 7/8 FIG 3. Includes Test Report and Certificate of Conformance. | 1 | |
| 55-33-101/2 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 55-33-10 PG 7/8 FIG 3. Includes Test Report and Certificate of Conformance. | 1 | |
| 55-33-101/3 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 55-33-10 PG 7/8 FIG 3. Includes Test Report and Certificate of Conformance. | 1 | |
| 55-36-01 | UT CALIBRATION REFERENCE STANDARD , STEP WEDGE, 7000 SERIES ALUMINUM, GENERIC AS PER ATR 72 NTM 55-36-01 | 1 | |
| 550T10483-401 | REFERENCE STANDARD, NDT | 1 | |
| 551-341-10 | Mitutoyo 551-341-10 ABSOLUTE Digimatic Caliper 0-300mm / 0-12", Nib and Standard Jaws | 1 | |
| 5543A17 | CHROME-PLATED 12-POINT STANDARD SOCKET, 1/4" DRIVE, 5/32" SIZE | 1 | |
| 5683101-2 | REFERENCE STANDARD | 2 | |
| 57-0034 | CALIBRATION STANDARD | 1 | |
| 57-10-02, | REFERENCE STANDARD | 1 | |
| 57-10-102/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-12 PT 4 FIGURE 6&7 PAGES 11&12. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-10-102/2 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-12 PT 4 FIGURE 6&7 PAGES 11&12. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-10-107/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-52 PT 6 FIGURE 5&6 PAGES 11&12. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-10-107/2 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-52 PT 6 FIGURE 6&7 PAGES 12&13. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-10-111/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-55 PT 6 FIGURE 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-10-111/2 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-55 PT 4 FIGURE 5&6 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-10-117/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-50 PT 6 FIGURE 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-10-117/2 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-48 PT 6 FIGURE 3&4 PAGES 7&8. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-10-119/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-42 PT 6 FIGURES 4&5 PAGE 7&8. Material: 7075-T6 & 2014A-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-12-501 | RIGHT AND LEFT WING REAR BEAM AT BL 35.8 — EDDY CURRENT INSPECTION CALIBRATION STANDARD, 1159W40007-1NDT (GULFSTREAM) | 1 | |
| 57-12-502 | RIGHT AND LEFT WING REAR BEAM AT RBS 103.3 — EDDY CURRENT INSPECTION PROBE :SPO 5053 PROBE :SPO 5054 CALIBRATION STANDARD, 1159W40005-1NDT (GULFSTREAM | 1 | |
| 57-12-504 | RIGHT AND LEFT WING REAR BEAM AT RBS 230.1 — EDDY CURRENT INSPECTION CALIBRATION STANDARD, 1159W40063-1NDT (GULFSTREAM | 1 | |
| 57-20-148A/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-20-24 PT 6 FIGURES 5&6 PAGE 9&10. Material: 2024-T3 & 2024-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-20-151-152A153A1 | NDT REFRENCE STANDARD | 1 | |
| 57-20-151-152A153A2 | NDT REFERENCE STANDARD | 1 | |
| 57-20-163/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-20-28 PT 6 FIGURES 4&5 PAGE 9&10. Material: 2024-T3 & 2024-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-20-179/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-20-10 PT 4 FIGURES 4 PAGE 8. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-54-103C | CUSTOM BOEING REFERENCE STANDARD 7075-T6 ALUMINUM | 1 | |
| 57-54-103C-POS | CUSTOM TRANSDUCER POSITIONER FOR 57-54-103C REFERENCE STANDARD | 1 | |
| 576714 | STANDARD STRAIGHT ACTION HAND CRIMP TOOL | 4 | |
| 40482020 | COMBINATION WRENCH,STANDARD LENGTH, 5/16, 12PT | 4 | |
| 52555348 | WIKA Vacuum Negative Pressure Gauge Standard: US-Standard | 1 | |
| 58.27 MS/M,43G MS/M | CONDUCTIVITY CALIBRATION STANDARD | 1 | |
| 580A | 1/2 RATCHET STANDARD HANDLE | 1 | |
| 5883204-1 | CESSNA REFERENCE STANDARD | 1 | |
| 590580 | MANDATORY MODULE STANDARD CHASSIS | 1 | |
| 59191030 | 7210/30-SPARE PARTS STANDARD MANOSKOP | 1 | |
| 5L16-A00 | STANDARD PHASED-ARRAY PROBE, 5 MHZ LINEAR ARRAY, 16 ELEMENTS, 0.012 IN. (0.31 MM) PITCH (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| 5L60-60X10-A14-P-2.5-OM | STANDARD PHASED ARRAY PROBE | 1 | |
| 6" X 18" ID 1" ANGLE | Standard Frame, Steel | 1 | |
| 6-0-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 5 | |
| 6-1-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 2 | |
| 6-2-N | COLD WORKING TOOL STANDARD | 3 | |
| 6-3-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 4 | |
| 6-3-NRIB6 | COLD WORKING TOOL STANDARD | 1 | |
| 600-058 | HAND BANDING TOOL - STANDARD CLAMPING BAND | 7 | |
| 6001-1 | Standard Bushing Style Hole Finder - Length: 8-1/2", Size: #40 | 1 | |
| 6001-1EL | Standard Bushing Style Hole Finder - Length: 13-1/2", Size: #40 | 2 | |
| 6001-2 | Standard Bushing Style Hole Finder - Length: 8-1/2", Size: #30 | 1 | |
| 6001-2EL | Standard Bushing Style Hole Finder - Length: 13-1/2", Size: #30 | 2 | |
| 6001-3 | Standard Bushing Style Hole Finder - Length: 8-1/2", Size: #21 | 3 | |
| 6001-3EL | Standard Bushing Style Hole Finder - Length: 13-1/2", Size: #21 | 1 | |
| 6001-5 | Standard Bushing Style Hole Finder - Length: 8-1/2", Size: #10 | 2 | |
| 6001-5EL | Standard Bushing Style Hole Finder - Length: 13-1/2", Size: #10 | 1 | |
| 6001-8 | Standard Bushing Style Hole Finder - Length: 8-1/2", Size: 1/4" | 1 | |
| 6001-8EL | Standard Bushing Style Hole Finder - Length: 13-1/2", Size: 1/4" | 1 | |
| 600S-DL | Coilhose Safety Blow Guns (Description: Safety Standard) (Add to cart: Add To Cart) | 1 | |
| 601-100 | ATS STANDARD BANDS | 2 | |
| 601R32-079K90 | CALIBRATION STANDARD KIT | 1 | |
| 604A | BOEING REFERENCE STANDARD 767 PT 6 53-60-01 FIG 1 | 1 | |
| 604B | BOEING REFERENCE STANDARD 767 PT 6 53-60-01 FIG 1 | 1 | |
| 605-10-PC-AU | SCREWDRIVER SET (STANDARD) | 1 | |
| 605-522 | CONDUCTIVITY STANDARD 43 IACS | 1 | |
| 605A | BOEING REFERENCE STANDARD 767 PT 6 22-10-01 | 1 | |
| 61-75A | Drive Pin Hand Punches (Punch diameter: 1/16") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) | 1 | |
| 61-75B | Drive Pin Hand Punches (Punch diameter: 1/16") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 3/32") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) | 1 | |
| 61-75C | Drive Pin Hand Punches (Punch diameter: 1/16") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 3/32") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 1/8") (Punch size: 3/4" ( | 1 | |
| 61-75D | Drive Pin Hand Punches (Punch diameter: 1/16") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 3/32") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 1/8") (Punch size: 3/4" ( | 1 | |
| 61-75E | Drive Pin Hand Punches (Punch diameter: 1/16") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 3/32") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 1/8") (Punch size: 3/4" ( | 1 | |
| 61-75F | Drive Pin Hand Punches (Punch diameter: 1/16") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 3/32") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 1/8") (Punch size: 3/4" ( | 1 | |
| 61-75G | Drive Pin Hand Punches (Punch diameter: 1/16") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 3/32") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 1/8") (Punch size: 3/4" ( | 1 | |
| 61-75H | Drive Pin Hand Punches (Punch diameter: 1/16") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 3/32") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 1/8") (Punch size: 3/4" ( | 1 | |
| 61-76A | Drive Pin Hand Punches (Punch diameter: 1/16") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 3/32") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 1/8") (Punch size: 3/4" ( | 1 | |
| 61-76B | Drive Pin Hand Punches (Punch diameter: 1/16") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 3/32") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 1/8") (Punch size: 3/4" ( | 1 | |
| 61-76C | Drive Pin Hand Punches (Punch diameter: 1/16") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 3/32") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 1/8") (Punch size: 3/4" ( | 1 | |
| 61-76D | Drive Pin Hand Punches (Punch diameter: 1/16") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 3/32") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 1/8") (Punch size: 3/4" ( | 1 | |
| 61-76E | Drive Pin Hand Punches (Punch diameter: 1/16") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 3/32") (Punch size: 3/4" (19 mm)) (Type: Standard) (Add to cart: Add To Cart) (Punch diameter: 1/8") (Punch size: 3/4" ( | 1 | |
| 615-3 | ARINC STANDARD DATA LOADER | 1 | |
| 618A | REFERENCE STANDARD | 1 | |
| 62200-7400 | Tool Kit for Standard Manual Press FFC | 1 | |
| 62200-7800 | Standard Manual Press for FFC | 1 | |
| 62201-0904 | Insertion Module for Standard Shield Signal Header, 6-Row by 14-Wide, 28.00mm | 1 | |
| 62201-0905 | Insertion Module for Standard Shield Signal Header, 6-Row by 13-Wide, 26.00mm | 1 | |
| 62202-0208 | Insertion Module for Standard Shield Signal Header, 6-Row by 25-Wide, 50.00mm | 1 | |
| 62202-0209 | Insertion Module for Standard Shield Signal Header, 8-Row by 10-Wide, 20.00mm | 1 | |
| 62202-0210 | Insertion Module for Standard Shield Signal Header, 8-Row by 25-Wide, 50.00mm | 1 | |
| 6270-R1 | EDDY CURRENT REFERENCE STANDARD | 1 | |
| 6270-R2 | EDDY CURRENT REFERENCE STANDARD | 1 | |
| 6283102-1 | CESSNA STANDARD | 1 | |
| 6283102-2 | CESSNA STANDARD | 1 | |
| 6380002-1 | CALIBRATION STANDARD KIT | 1 | |
| 63819-1300 | Hand Crimp Tool for Standard 1.57mm Pin and Socket Crimp Terminals, 18-24 AWG | 9 | |
| 63819-6800 | Hand Crimp Tool for Industry standard 1.78mm Terminals | 1 | |
| 63819-6900 | Hand Crimp Tool for Industry standard 1.78mm Tab Terminals, 24-26 AWG Wire | 1 | |
| 6383103 | REFERENCE STANDARD KIT | 1 | |
| 6383106-1 | CESSNA STANDARD, 525 SERIES CREW SIDE WINDOW FRAME | 1 | |
| 6383204-1 | Cessna Standard, 525B Main Spar Cap WS 166.33 | 1 | |
| 640-025-007 | GEIT ROTARY TAPERED STANDARD BLOCK KIT ALUMINUM | 1 | |
| 640-050-001 | STANDARD-CALIBRATION | 1 | |
| 640-050-002 | STANDARD-CALIBRATION | 2 | |
| 640-050-003 | CALIBRATION STANDARD | 2 | |
| 64000-0041 | Manual Standard Press for SC Power Connector | 1 | |
| 64003-7300 | Right Hand Crimp Tool for Female Non-Insulated Standard Quick Disconnects, 12-16 AWG Wire | 1 | |
| 6412-159 | REFERENCE STANDARD | 1 | |
| 6412-249 | STANDARD 335 | 1 | |
| 6583102-1 | BLOQUE PATRON CESSNA REFERENCE STANDARD | 1 | |
| 6583103-1 | Cessna Model 500 Calibration Standard 53-30-03-0 Rev. 14 Figure 4 Sheet 1 Inspection. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 6583203-1 | Reference Standard,Main Carry thru Lug | 1 | |
| 6583203-2 | Reference Standard,Main Carry thru Lug | 1 | |
| 6625AF-XRU/300 | RESISTANCE MEASURMENT STANDARD | 1 | |
| 6635-01-310-2481 | REFERENCE STANDARD,PHYSICAL PROP | 1 | |
| 6683101-17 | ET CALIBRATION STANDARD, 560 XL SKIN AND DOUBLER | 1 | |
| 6914V-SD | STANDARD SCRADER VALVE TOOL, TO REMOVE CORE OF PRESSURE TEST VALVE. | 1 | |
| 69360-11 | STANDARD MAG KIT | 1 | |
| 6983101-5 | CESSNA REFERENCE STANDARD PAINT THICKNESS MESURAMENT | 1 | |
| 6AL-6V-2SN-Ti | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" +/-.001 DEEP, (MAX WIDTH .005"), 6AL-6V-2SNTi | 1 | |
| 6B34 | STANDARD COMPASS FOR COMPASS SWING | 1 | |
| 7-696 | 1’’ DRIVE STANDARD IMPACT SOCKET 6-POINT 3’’ | 1 | |
| 7029P | REFERENCE STANDARD | 1 | |
| 703A91022301 | STANDARD HOISTING RING | 1 | |
| 703A95-0030-10 | ELECTRICIAN'S STANDARD CASE | 1 | |
| 70700-25603-101 | UT REFERENCE STANDARD | 1 | |
| 7075-T6 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, ALUMINUM ALLOY | 1 | |
| 727085 | STANDARD ABRASIVES | 1 | |
| 727086 | STANDARD ABRASIVES | 2 | |
| 789746 | SHEATH BONDING TEMPLATE (HAMILTON STANDARD) | 1 | |
| 71130013 | 11050N-3-STANDARD TWO ARM PULLER | 1 | |
| 71130015 | 11050N-5-STANDARD TWO ARM PULLER | 1 | |
| 71190011 | 11055N-1-STANDARD PULLERS TWO-ARMED W | 1 | |
| 71190012 | 11055N-2-STANDARD PULLERS TWO-ARMED W | 1 | |
| 71190013 | 11055N-3-STANDARD PULLERS TWO-ARMED W | 1 | |
| 532002100 | STANDARD "CROW FOOT WRENCH FLARE NUT" TORQUE | 1 | |
| 71658-10-42 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-10-42 (5/8" X 4.1") | 1 | |
| 71658-10-46 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-10-46 (5/8" X 4.4") | 1 | |
| 71658-14-45 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-14-45 (7/8" X 4.8") | 1 | |
| 71658-14-50 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-14-50 (7/8" X 5.1") | 1 | |
| 71658-16-55 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-16-55 (1.0" X 6.0") | 1 | |
| 71658-18-53/2&3 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 CARBON STEEL, 54-10-11 PAGE 651 FIG.603 SHEET 39 | 1 | |
| 71658-18-59 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-8-59 (1 1/8" X 6.25") | 1 | |
| 71658-18-64 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-18-64 (1 1/8" X 6.5") | 1 | |
| 71658-20-68 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-20-68 (1 1/4" X 7.0") | 1 | |
| 71658-7-35/1&4 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 CARBON STEEL, 54-10-11 PAGE 651 FIG.603 SHEET 39 | 1 | |
| 717RS1 | Boeing Standard, 717-200 SECTION2-1 FIG1, 4340 Normalized | 1 | |
| 717RS12 | 717-200 REFERENCE STANDARD...FIG. 1.16 SHEET 1-5, PAGES 1-5. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS15 | Boeing Standard, 717-200 SECTION2-1 FIG1.4 PG 1-4, | 1 | |
| 717RS20 | 717-200 REFERENCE STANDARD...FIG. 1.21 SHEET 1-3, PAGES 1-3. MATERIAL: 2014-T6 and 7075-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS23 | 717-200 REFERENCE STANDARD...FIG. 1.8 SHEET 1-5, PAGES 1-5. MATERIAL: 2024-T3 and 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS2A | 717-200 REFERENCE STANDARD...FIG. 1.12 SHEET 1-4, PAGES 1-4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS2B | 717-200 REFERENCE STANDARD...FIG. 1.13 SHEET 1-4, PAGES 1-4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS2C | 717-200 REFERENCE STANDARD...FIG. 1.14 SHEET 1-4, PAGES 1-4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS2D | 717-200 REFERENCE STANDARD...FIG. 1.15 SHEET 1-4, PAGES 1-4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS4 | Boeing Standard, 717-200 SECTION2-1 FIG1.17 PG 1-4, | 1 | |
| 717RS7 | Boeing Standard, 717-200 SECTION2-1 FIG1.22 PG 1-7 *APPLY SEALANT* | 1 | |
| 717RS8 | Boeing Standard, 717-200 SECTION2-1 FIG1.23 PG 1-6 *APPLY SEALANT* | 1 | |
| 717RS9 | Boeing Standard, 717-200 SECTION2-1 FIG1.24 PG 1 | 1 | |
| 717RST5 | Boeing Standard, 717-200 SECTION2-1 FIG1.18 PG 1-3 | 1 | |
| 717RST6 | Boeing Standard, 717-200 SECTION2-1 FIG1.19 PG 1-3 | 1 | |
| 737NG TYP STRINGER | Boeing Standard | 1 | |
| 737NG TYP STRINGER RE-WORK | Boeing Standard | 1 | |
| 73A26-01 | STANDARD TARGET (ELDEC CRANE) | 1 | |
| 74D115271-1005 | REFERENCE STANDARD | 1 | |
| 750071403 | STANDARD "O" RING | 1 | |
| 7552-4 | TOOL FOR INSTALLATION OF STANDARD HELI COIL INSERT IN THE PISTION HOUSING | 9 | |
| 7637987-19 | CUSTOM SPO-2664 SLIDING PROBE FIXTURE USED WITH DC-10 REFERENCE STANDARD 7637987-15 Includes Certificate of Conformance | 1 | |
| 7637987-9 | Eddy Current Inspection Reference standard | 1 | |
| 77000DL00.01300.088 | STANDARD DIGITAL MULTIMETER | 1 | |
| 782-6MBC | STANDARD 6 DIA | 2 | |
| 787-9-HS-1 | Boeing Standard Previously 787-9-HS 55-10-10 55-10-05/06 R | 1 | |
| 787-9-HS-10 | BOEING STANDARD | 1 | |
| 787-9-HS-11 | BOEING STANDARD | 1 | |
| 787-9-HS-12 | BOEING STANDARD | 1 | |
| 787-9-HS-13 | BOEING STANDARD | 1 | |
| 787-9-HS-14 | Boeing Standard | 1 | |
| 787-9-HS-2 | Boeing Standard previously 787-9-HS 55-10-10 PFWEB PF UPR&LWR | 1 | |
| 787-9-HS-3 | Boeing Standard | 1 | |
| 787-9-HS-4 | BOEING STANDARD | 1 | |
| 787-9-HS-5 | BOEING STANDARD | 1 | |
| 787-9-HS-6 | BOEING STANDARD | 1 | |
| 787-9-HS-7 | Boeing Standard | 1 | |
| 787-9-HS-8 | BOEING STANDARD | 1 | |
| 787-9-HS-9 | Boeing Standard | 1 | |
| 787-EC57-54-08 | Boeing Standard | 1 | |
| 787-EC57-70-01A | Boeing 787 Reference Standard | 1 | |
| 787-F1-ET-14 | Boeing Standard | 1 | |
| 787-FT-ET-1 | Boeing Standard | 1 | |
| 787-FT-ET-14 | Boeing standard | 1 | |
| 787-FT-ET-15 | Boeing Standard | 1 | |
| 787-FT-ET-16 | Boeing Standard | 1 | |
| 787-FT-ET-16:787-FT-ET-2 | Boeing Standard | 1 | |
| 787-FT-ET-18B | REFERENCE STANDARD 787-FT-ET-18B, | 1 | |
| 787-FT-ET-20 | Boeing Standard | 1 | |
| 787-FT-ET-21 | Boeing Standard | 1 | |
| 787-FT-ET-22 | Boeing Standard | 1 | |
| 787-FT-ET-24 | Boeing Standard | 1 | |
| 787-FT-ET-25 | Boeing Standard | 1 | |
| 787-FT-ET-26A | BOEING STANDARD | 1 | |
| 787-FT-ET-26B | BOEING STANDARD | 1 | |
| 787-FT-ET-26C | BOEING REFERENCE STANDARD | 1 | |
| 787-FT-ET-3 | Boeing Standard | 1 | |
| 787-FT-ET-4 | Boeing Standard | 1 | |
| 787-FT-ET-7 | Boeing Standard | 1 | |
| 787-FT-ET-7A | Boeing Standard | 1 | |
| 787-FT-ET-7B | Boeing Standard | 1 | |
| 787-FT-ET-7C | Boeing Standard | 1 | |
| 787-FT-ET-7D | Boeing Standard | 1 | |
| 787-FT-UT-10 53-17-03-4a-15 | Boeing Standard | 1 | |
| 787-FT-UT-11 | Boeing Standard | 1 | |
| 787-FT-UT-12 | Boeing Standard | 1 | |
| 787-FT-UT-12-Ti | Boeing Standard Titanium | 1 | |
| 787-FT-UT-13 | Boeing Standard | 1 | |
| 787-FT-UT-14 | BOEING METAL REFERENCE STANDARD | 1 | |
| 787-FT-UT-16 | Boeing Standard | 1 | |
| 787-FT-UT-17 | Boeing Standard | 1 | |
| 787-FT-UT-6 | Boeing Standard | 1 | |
| 787-FT-UT-8 | Boeing Standard | 1 | |
| 787-FT-UT-9 | Boeing Standard | 1 | |
| 787-FT-UT-9A | Boeing Standard | 1 | |
| 787-FT-UT-9B | Boeing Standard | 1 | |
| 787-FT-UT-9C | Boeing Standard | 1 | |
| 79204-25 | "PUMP - VACUUM, PORTABLE, STANDARD DUTY | 1 | |
| 7947479-10 | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 3 | |
| 7947479-10 ALUMINUM | Air Force Standard, 7075T6 aluminum | 1 | |
| 7947479-10 I | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10 S | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10 Ti | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10-304 | REFERNCE STANDARD | 1 | |
| 7947479-10-4340 | REFERENCE-STANDARD-STEEl | 1 | |
| 7947479-10-SS | REFERNCE STANDARD | 1 | |
| 7947479-10-T | REFERNCE STANDARD | 2 | |
| 7947479-10/17-4PH | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10/304SS | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479‐10 | ROTARY REFERENCE STANDARD | 3 | |
| 8-0-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 2 | |
| 8-1-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 3 | |
| 8000CSA 12 1/2 X 3 | RIVETER/INSERTION TOOL, COMPLETE WITH FOOT CONTROL, HOSES, CONNECTORS, STANDARD ACCESSORIES GROUP AND HARDWARE. READY TO OPERATE. NOTE: DOES NOT INCLUDE PEDESTAL STAND. | 1 | |
| 8000CSA 12 1/2 x 3 | Riveter/Insertion tool, complete with foot control, hoses, connectors, standard accessories group and hardware. Ready to operate. NOTE: Does NOT include pedestal stand. | 1 | |
| 8000CSA 24 1/2 x 3 | Riveter/Insertion tool, complete with foot control, hoses, connectors, standard accessories group and hardware. Ready to operate. NOTE: Does NOT include pedestal stand. | 1 | |
| 8000CSA 9 1/2 x 3 | Riveter/Insertion tool, complete with foot control, hoses, connectors, standard accessories group and hardware. Ready to operate. NOTE: Does NOT include pedestal stand. | 1 | |
| 80RS.22 | NDT STANDARD | 3 | |
| 80RS01 | CALIBRATION STANDARD, | 1 | |
| 80RS02 | CALIBRATION STANDARD, | 1 | |
| 80RS03 | CALIBRATION STANDARD, | 1 | |
| 80RS04 | CALIBRATION STANDARD, | 1 | |
| 80RS05 | CALIBRATION STANDARD, | 1 | |
| 80RS06 | NDT STANDARD | 1 | |
| 80RS07 | NDT STANDARD | 2 | |
| 80RS08 | CALIBRATION STANDARD, | 1 | |
| 80RS10 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS11 | Calibration Standard, MD80 SID Section 2-1:FIG16 PG1 SHEET1 | 1 | |
| 80RS12 | Calibration Standard, MD80 SID Section 2-1:FIG19 PG1 SHEET1 | 1 | |
| 80RS13 | Calibration Standard, MD80 SID Section 2-1:FIG20 PG1 SHEET1 | 1 | |
| 80RS14 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS15 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS16 | Calibration Standard, MD80 SID Section 2-1:FIG23 PG1 SHEET1 | 1 | |
| 80RS18 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS19 | Ultrasonic Inspection Reference standard MD-80 | 1 | |
| 80RS21 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS22 | Ultrasonic Inspection Reference standard MD-80 | 3 | |
| 80RS23 | Calibration Standard, MD80 SID Section 2-1:FIG31 PG1 SHEET1 | 1 | |
| 80RS24 | BOEING REFERENCE STANDARD. MATERIALS: -3 DETAIL ALUMINUM SKIN 2024-T351, -5 DETAIL ALUMINUM STRINGER 2024-t351, -7 DETAIL ALUMINUM 7075-T6511, -9 DETAIL ALUMINUM 7075-T73 and -11 DETAIL ALUMINUM 7075-T73. Includes Test Report and Certificate of Conformanc | 1 | |
| 80RS25 | Calibration Standard, MD80 | 1 | |
| 80RS26 | Calibration Standard, MD80 | 1 | |
| 80RS3 | Calibration Standard, MD80 SID Section 2-1:FIG3 PG1 SHEET1 | 1 | |
| 80RS4 | Ultrasonic Inspection Reference standard MD-80 | 1 | |
| 80RS5 | Calibration Standard, MD80 SID Section 2-1:FIG5 PG1 SHEET1 | 1 | |
| 80RS6 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS7 | Ultrasonic Inspection Reference standard MD-80 | 1 | |
| 80RS8 | NDT STANDARD | 1 | |
| 80RS9 | MD-80 REFERENCE STANDARD | 1 | |
| 810 | BUCKLE 1Ó STANDARD HANDLE | 1 | |
| 810-218D | Ref. Standard set for Harness Tester (t) | 1 | |
| 81091004 | EASA STANDARD TOOL BOX | 1 | |
| 812.350.11 | UCAS Standard Platform variable height 2.2m | 1 | |
| 81490004 | STANDARD COVER PLATE | 1 | |
| 81602-FH385-1005 | REFERENCE STANDARD | 1 | |
| 831451-1 | STANDARD, REFERENCE | 1 | |
| 8400K | CALIBRATION BLOCK - STANDARD | 7 | |
| 8500C | BALANCER/ANALYZER W/ STANDARD ACCESSORIES | 4 | |
| 8500C+ | Balancer/Analyzer w/ Standard Accessories | 4 | |
| 85ACF | STANDARD CUTTER | 1 | |
| 871087-2 | STANDARD TP PISTOLE | 1 | |
| 8784B-NB | US DOT STANDARD 3600PSI NITROGEN BOTTLE FOR PART # 8784B | 1 | |
| 8784B-SPC | SPECIAL PAINT COLOUR FOR PART # 8784B (STANDARD COLOUR IS SAFETY YELLOW) | 1 | |
| 88-700 | GAGE SET STANDARD | 2 | |
| 88-800 | GAGE SET STANDARD | 2 | |
| 8800-3 | 8800-3;3 Yr Total HW Warranty + Standard Calibrations - SILVER-3 | 1 | |
| 8800-5 | 8800-5;5 Yr Total HW Warranty + Standard Calibrations - SILVER-5 | 1 | |
| 8800-R-SILVER | 8800-R-SILVER;1yr. Renewal Standard Full Maintenance Contract 8800SX Existing Equipment | 1 | |
| 895-3900-06-101 | BOX ELECTROAVIONIC, STANDARD TOOLS | 1 | |
| 8C2504 | ADAPTER, BRACKET - STANDARD ROLLOVER STAND | 1 | |
| 90-002 | NOVA® STANDARD Motor .3 HP, 2800 RPM | 1 | |
| 90-006 | NOVA® STANDARD Motor, 3200rpm, 0.5 hp | 2 | |
| 90-025 | NOVA® STANDARD 90° Angle Head | 1 | |
| 90-027 | NOVA® STANDARD 45° Angle Head | 1 | |
| 90-030 | NOVA® STANDARD 360° Angle Head | 1 | |
| 90-LS1003 | Bowers Lead standard for 'V' threads, 3/4" TPF | 1 | |
| 90-LS1004 | Bowers Lead standard for straight threads, NPS threads | 1 | |
| 90-LS5003M | Bowers Lead standard for metric threads | 1 | |
| 90-LS5004M | Bowers Metric Lead Standard 1, 1.5, 2,3 & 4mm | 1 | |
| 900 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 90004 | 90004;Standard Accessories;7200 | 1 | |
| 901-10800-2 | BALANCER/ANALYZER W/ STANDARD ACCESSORIES | 3 | |
| 901-14990 | BALANCER/ANALYZER W/ STANDARD ACCESSORIE | 2 | |
| 9043 | Dill Air Controls 9043 Standard Bore High Pressure Strut Coupler - .375-24 Hose Connector - 3,000 PSIG | 3 | |
| 90252 | Digital Aircraft Cable Tensiometers (Description: Standard Preset: 1/16", 3/32",) (Description continued: 1/8" & 5/32") (Range: 20 to 250 lbs) (Resolution: 0.5 lbs) (Add to cart: Contact us to order) | 1 | |
| 90253 | Digital Aircraft Cable Tensiometers (Description: Standard Preset: 1/16", 3/32",) (Description continued: 1/8" & 5/32") (Range: 20 to 250 lbs) (Resolution: 0.5 lbs) (Add to cart: Contact us to order) (Description: Standard Preset: 3/32", 1/8" &) (Descript | 1 | |
| 90254 | Digital Aircraft Cable Tensiometers (Description: Standard Preset: 1/16", 3/32",) (Description continued: 1/8" & 5/32") (Range: 20 to 250 lbs) (Resolution: 0.5 lbs) (Add to cart: Contact us to order) (Description: Standard Preset: 3/32", 1/8" &) (Descript | 1 | |
| 90255 | Digital Aircraft Cable Tensiometers (Description: Standard Preset: 1/16", 3/32",) (Description continued: 1/8" & 5/32") (Range: 20 to 250 lbs) (Resolution: 0.5 lbs) (Add to cart: Contact us to order) (Description: Standard Preset: 3/32", 1/8" &) (Descript | 1 | |
| 906-10272-5 | CALIBRATION UNIT - STANDARDS | 4 | |
| 90676 | 90676;390XOPT611 TETRA MS; MTP-850; AutoTest Incl Opt054 standard; Req Opt110;115 | 1 | |
| 915-26514 | BALANCER/ANALYZER W/ STANDARD ACCESSORIES | 2 | |
| 91732A644 | HELICOìL M8x1.25X.08LG-18-8 SS STANDARD | 1 | |
| 9300GSBFMUYO | MECHANIC STANDARD TOOL | 1 | |
| 935-14-72/DB | SEMI-STANDARD PLATINUM RESISTANCE THERMOMETER | 1 | |
| 94126 | Cordless Electric Scissor Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Standard Blade Assembly) (Add to cart: Contact us to order) | 1 | |
| 94128 | Cordless Electric Scissor Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Standard Blade Assembly) (Add to cart: Contact us to order) (Description: Blade Assembly with Shoe) (Add to cart: Contact us to order) | 1 | |
| 9429M14 | FIXTURE - ARM - STANDARD | 1 | |
| 9429M14G04 | FIXTURE, LIFT ARM - STANDARD, 6000 LB (2721 KG) | 1 | |
| 9471M17P01 | STANDARD LRU JACK | 3 | |
| 9481M78 | ADAPTER - BRACKET-STANDARD ROLLOVER STAND | 1 | |
| 95-92134-0001 | ELECTRIC AND/OR ELECTRONIC STANDARD TOOL KIT | 1 | |
| 954-2399 | STANDARD COMPASS FOR COMPASS SWING | 5 | |
| 968RB | TIRE DEFLATOR - STANDARD/SMALL BORE | 13 | |
| 981-102 | ANGLE STANDARD | 1 | |
| 98669 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| 9080317 | CONDUCTIVITY STANDARD 11 MS/M (18 IACS) | 1 | |
| 9080325 | CONDUCTIVITY STANDARD 16 MS/M (28 IACS) | 1 | |
| 9080341 | CONDUCTIVITY STANDARD 22 MS/M (38 IACS) | 1 | |
| 9080350 | CONDUCTIVITY STANDARD 30 MS/M (52 IACS) | 1 | |
| 9080708 | CALIBRATION STANDARD SET (3 STDS) 20 TO 40 IACS (30 IACS); (42 IACS); (60 IACS) | 1 | |
| 9081003 | CALIBRATION STANDARD SET (2 STDS.) 4.4 MS/M (8 IACS);58 MS/M (100 IACS) | 1 | |
| 9213012 | SURFACE PROBE, STANDARD BRIDGE DETACHABLE SURFACE | 1 | |
| 9213550 | SURFACE PROBE, STANDARD REFLECTION DETACHABLE SURFACE PROBE WITH A DIAMETER OF .25 IN. (6.3 MM) AND | 1 | |
| 9222193 | SURFACE PROBE, POWERLINK STANDARD BRIDGE DETACHABLE SURFACE PROBE WITH A DIAMETER OF .62 IN. (15.7 M | 1 | |
| 9222305 | CALIBRATION STANDARD VM30889-C1A 480 KHZ CONDUCTIVITY PROBE | 1 | |
| 9317796 | S-MP-3 MECHANICAL IMPEDANCE ANALYSIS PROBE, STANDARD, RIGHT ANGLE PROBE, .5 IN. TIP DIAMETER (CAN BE | 1 | |
| 9317808 | 9317808 : S-MP-4 STANDARD .25' RIGHT ANGLE MIA PROBE, SMALL 6.35 MM (0.25") TIP DIAMETER, REQUIRES B | 1 | |
| 9322075 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 | |
| 9522103 | CONDUCTIVITY STANDARD BLOCK | 1 | |
| 9522321 | CONDUCTIVITY STANDARD SET | 1 | |
| 97880831 | WRENCH:COMBINATION STANDARD SET ... | 1 | |
| 8818471000 | STANDARD TOOL CASE | 1 | |
| 988S57105016-200 | REFERENCE STANDARD | 1 | |
| 98A09001000000 | BAR-TOWING SUPSD BY STANDARD TOWBAR | 1 | |
| 98A52003000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A52003000000 | CALIBRATION-STANDARD | 1 | |
| 98A52003001 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A52003001000 | CALIBRATION-STANDARD | 1 | |
| 98A52003002 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A52003002000 | CALIBRATION-STANDARD | 1 | |
| 98A52003003 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 98A52003004 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A52003004000 | CALIBRATION-STANDARD | 1 | |
| 98A52003005000 | CALIBRATION-STANDARD | 1 | |
| 98A53003001000 | CALIBRATION STANDARD | 1 | |
| 98A53003002 | CALIBRATION STANDARD | 1 | |
| 98A53003002000 | CALIBRATION STANDARD | 1 | |
| 98A53003003 | Ultrasonic Inspection reference standard A300 | 1 | |
| 98A53003003000 | CALIBRATION STANDARD | 1 | |
| 98A53003004000 | CALIBRATION STANDARD | 1 | |
| 98A53003005 | CALIBRATION STANDARD | 1 | |
| 98A53003005000 | CALIBRATION STANDARD | 1 | |
| 98A53003006 | CALIBRATION STANDARD | 1 | |
| 98A53003006000 | CALIBRATION STANDARD | 1 | |
| 98A53003007 | CALIBRATION STANDARD | 1 | |
| 98A53003007000 | CALIBRATION STANDARD | 1 | |
| 98A53003008 | CALIBRATION STANDARD | 1 | |
| 98A53003008000 | CALIBRATION STANDARD | 1 | |
| 98A53153000000 | CALIBRATION STANDARD | 1 | |
| 98A53403001000 | CALIBRATION-STANDARD | 1 | |
| 98A53403002000 | CALIBRATION-STANDARD | 1 | |
| 98A53403003000 | CALIBRATION-STANDARD | 1 | |
| 98A53603000000 | CALIBRATION-STANDARD | 1 | |
| 98A53603001000 | CALIBRATION STANDARD | 1 | |
| 98A53603001100 | CALIBRATION STANDARD | 1 | |
| 98A53603001101 | CALIBRATION STANDARD | 1 | |
| 98A53603002 | REFERENCE STANDARD | 1 | |
| 98A53603002000 | CALIBRATION-STANDARD | 1 | |
| 98A53703512000 | CALIBRATION STANDARD | 1 | |
| 98A53803002000 | CALIBRATION STANDARD | 1 | |
| 98A53803004000 | STANDARD-CALIBRATION | 1 | |
| 98A53803006000 | CALIBRATION-STANDARD | 2 | |
| 98A53803012000 | CALIBRATION-STANDARD | 1 | |
| 98A53803013000 | CALIBRATION-STANDARD | 1 | |
| 98A53803014000 | CALIBRATION-STANDARD | 1 | |
| 98A53803014001 | CALIBRATION-STANDARD | 3 | |
| 98A53803015000 | CALIBRATION-STANDARD | 1 | |
| 98A53803016 | Ultrasonic Inspection reference standard A300 | 1 | |
| 98A53803016000 | CALIBRATION-STANDARD | 1 | |
| 98A53803017000 | CALIBRATION-STANDARD | 1 | |
| 98A53803018 | Airbus Standard, A300 PT4 53-15-08:PG5 FIG3 | 1 | |
| 98A53803018000 | CALIBRATION-STANDARD | 2 | |
| 98A5380301900 | Airbus Standard, A300-600 PT4 57-10-46:PG404 FIG403 | 1 | |
| 98A53803019000 | CALIBRATION-STANDARD | 3 | |
| 98A5380302000 | Airbus Standard, A300-600 PT4 57-10-46:PG404 FIG404 | 1 | |
| 98A53803020000 | CALIBRATION-STANDARD | 3 | |
| 98A54003018000 | CALIBRATION-STANDARD | 1 | |
| 98A54003019 | AIRBUS A300 REFERENCE STANDARD PART 4 54-40-00 PG. 13 FIGURE 8, SSI NO. 54-10-07. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| 98A54003019000 | CALIBRATION-STANDARD | 1 | |
| 98A54003069 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A54003069000 | CALIBRATION STANDARD | 2 | |
| 98A54003072 | Airbus Standard, A300-600 PT4 54-50-23:PG404 FIG403 | 1 | |
| 98A54003072000 | CALIBRATION STANDARD | 2 | |
| 98A54003073 | Airbus Standard, A300-600 PT4 54-50-23:PG404 FIG404 | 1 | |
| 98A54003073000 | CALIBRATION STANDARD | 3 | |
| 98A54003074 | AIRBUS A300 REFERENCE STANDARD PART 4 54-40-00 PG.19 FIGURE 12, SSI NO. 54-40-07. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| 98A54003074000 | CALIBRATION-STANDARD | 3 | |
| 98A54003075 | Airbus Standard, A300 PT4 54-40-00: PG5 FIG3 | 2 | |
| 98A54003075000 | CALIBRATION-STANDARD | 1 | |
| 98A54003077 | Airbus Standard, A300 PT4 54-40-00: PG5 FIG4 | 2 | |
| 98A54003077000 | CALIBRATION-STANDARD | 1 | |
| 98A54003078000 | CALIBRATION-STANDARD | 1 | |
| 98A54003079000 | CALIBRATION-STANDARD | 1 | |
| 98A54003095000 | CALIBRATION-STANDARD | 1 | |
| 98A54003096 | REFERENCE STANDARD | 1 | |
| 98A54003096000 | CALIBRATION-STANDARD | 3 | |
| 98A54003097000 | CALIBRATION-STANDARD | 2 | |
| 98A54003098000 | CALIBATION-STANDARD | 1 | |
| 98A54403025000 | Airbus Standard, A300-600 PT4 54-50-20:PG405 FIG404 | 1 | |
| 98A54603006000 | CALIBRATION-STANDARD | 1 | |
| 98A54603008000 | REFERENCE STANDARD | 1 | |
| 98A54603008100 | CALIBRATION-STANDARD | 1 | |
| 98A54603008101 | CALIBRATION-STANDARD | 1 | |
| 98A57103003000 | REFERENCE STANDARD | 1 | |
| 98A57103004000 | REFERENCE STANDARD | 1 | |
| 98A57103006000 | CALIBRATION STANDARD | 1 | |
| 98A57103007000 | CALIBRATION-STANDARD | 1 | |
| 98A57103008000 | CALIBRATION STANDARD | 1 | |
| 98A57103009000 | CALIBRATION-STANDARD | 2 | |
| 98A57103010000 | CALIBRATION-STANDARD | 1 | |
| 98A57103011 | Surface Standard with .2, .5, 1mm Notches, 2024T6 | 1 | |
| 98A57103011000 | CALIBRATION-STANDARD | 1 | |
| 98A57103012000 | CALIBRATION-STANDARD | 1 | |
| 98A57103013000 | TAP TEST TOOL REF STANDARD | 19 | |
| 98A57103015000 | CALIBRATION STANDARD | 1 | |
| 98A57103016 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A57103016000 | CALIBRATION-STANDARD | 1 | |
| 98A57103016001 | Ultrasonic Inspection Reference standard A300-600 | 2 | |
| 98A57103017 | Airbus Standard, A300-600 PT6 57-10-29 PG 604 FG 603 | 1 | |
| 98A57103017000 | CALIBRATION-STANDARD | 1 | |
| 98A57103020000 | CALIBRATION STANDARD | 1 | |
| 98A57103021000 | CALIBRATION-STANDARD | 1 | |
| 98A57103021100 | CALIBRATION STANDARD | 1 | |
| 98A57103021101 | CALIBRATION STANDARD | 1 | |
| 98A57103021102 | CALIBRATION STANDARD | 1 | |
| 98A57103021104 | CALIBRATION STANDARD | 1 | |
| 98A57103021106 | CALIBRATION STANDARD | 1 | |
| 98A57103021108 | CALIBRATION STANDARD | 1 | |
| 98A57103021109 | CALIBRATION STANDARD | 1 | |
| 98A57103021110 | CALIBRATION STANDARD | 1 | |
| 98A57103022000 | CALIBRATION STANDARD | 1 | |
| 98A57103023000 | CALIBRATION STANDARD | 1 | |
| 98A57103025000 | CALIBRATION STANDARD | 1 | |
| 98A57103025001 | CALIBRATION STANDARD | 1 | |
| 98A57103026000 | CALIBRATION STANDARD | 1 | |
| 98A57103026001 | REFERENCE STANDARD | 1 | |
| 98A57103027000 | CALIBRATION STANDARD | 1 | |
| 98A57103030000 | PLATE-STANDARD DRILLING | 1 | |
| 98D10203500000 | MOORING KIT-NLG (BASIC STANDARD TOWING BRACKET) | 6 | |
| 98D10203500004 | MOORING KIT - NLG (BASIC STANDARD TOWING B) | 7 | |
| 98D32403005001 | ADAPTOR OR ADAPTOR - BRAKE UNIT NUT OR SOCKET - STANDARD, LARGE | 23 | |
| 98D36109001000 | LEAP ENGINE STANDARD BLEED TEST EQUIPMENT | 9 | |
| 98D53103001000 | REFERENCE STANDARD | 1 | |
| 98DNSA20206060 | STANDARD RIGGING PIN, 6MM X 60MM | 28 | |
| 98F29003000000 | WRENCHES-STANDARD TORQUE SET | 15 | |
| 98F29003000000-57 | WRENCHES-STANDARD TORQUE SET | 1 | |
| 98F32401001000 | STANDARD WHEEL R AND I DOLLY TYPE | 14 | |
| 98F71203010000 | STANDARD TOOL FCD FLAG | 4 | |
| 98L2409004 | STANDARD HOIST | 1 | |
| 98L2409004000 | STANDARD HOIST ASSEMBLY | 1 | |
| 98L24209004000 | STANDARD HOIST | 2 | |
| 98L29003002000 | TOOL SET,STANDARD TORQUE | 5 | |
| 98L53509010000 | LADDER, STANDARD - S19 | 2 | |
| 98L53509011000 | PLATFORM-STANDARD, SECTION 19 | 2 | |
| 98L53509011104 | STANDARD PLATFORM S19 | 1 | |
| 98L53509011106 | STANDARD PLATFORM S19 | 1 | |
| 98S51605000-200 | STANDARD, CALIBRATED ASSEMBLY | 1 | |
| 98S51605000-202 | ATR NDT REFERENCE STANDARD | 1 | |
| 98S51605000-204 | ATR NDT REFERENCE STANDARD | 1 | |
| 98S51605000-206 | ATR NDT REFERENCE STANDARD | 1 | |
| 98S51605000-208 | ATR NDT REFERENCE STANDARD | 1 | |
| 98S51605000-210 | ATR NDT REFERENCE STANDARD | 1 | |
| 98S51605001-2-18 | CALIBRATION STANDARD | 3 | |
| 98S51605001-200 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 2024T3 | 4 | |
| 98S51605001-202 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 15-5PH | 3 | |
| 98S51605001-204 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 TA6V | 3 | |
| 98S51605001-206 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 | 3 | |
| 98S51605001-208 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 | 3 | |
| 98S51605001-212 | AR Standard, ATR72 PT6 51-60-00:PG629 FIG616 SHT1 2024T3 | 4 | |
| 98S51605001-214 | ATR Standard, ATR72 PT6 51-60-00:PG629 FIG616 SHT1 15-5PH | 4 | |
| 98S51605001-216 | ATR Standard, ATR72 PT6 51-60-00:PG629 FIG616 SHT1 TA6V | 3 | |
| 98S51605001-218 | ATR Standard, ATR72 PT6 51-60-00:PG629 FIG616 SHT1 2024T3 | 3 | |
| 98S51605001-218-5 | ATR Standard, ATR72 PT6 51-60-00:PG629 FIG616 SHT1 2024T3, .375 thru .625, no countersink | 1 | |
| 98S51605001-219 | ATR Standard, ATR72 PT6 51-60-00:PG629 FIG616 SHT1 | 1 | |
| 98S51605001-220 | ATR Standard, ATR72 PT6 51-60-00:PG629 FIG616 SHT1 15-5PH | 4 | |
| 98S51605001-222 | ATR Standard, ATR72 PT6 51-60-00:PG629 FIG616 SHT1 TA6V | 3 | |
| 98S51605001-224 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 2024T3 | 4 | |
| 98S51605001-226 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 15-5PH | 3 | |
| 98S51605001-228 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 TA6V | 3 | |
| 98S51605001-230 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 2024T3 | 4 | |
| 98S51605001-232 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 15-5PH | 3 | |
| 98S51605001-234 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 TA6V | 3 | |
| 98S51605001200 | STANDARD, CALIBRATED | 4 | |
| 98S51605001212 | ET CALIBRATION STANDARD | 4 | |
| 98S51605001218-REVE | CALIBRATION TEMPLATE STANDARD | 1 | |
| 98S51605002200 | NDT CALIBRATION STANDARD | 1 | |
| 98S520305008-200 | ATR72 REFERENCE STANDARD PT 6 52-31-04 PAGE 603 FIGURE 601. Material: 2024-T62. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S52305004-200 | CALIBRATION STANDARD | 3 | |
| 98S52305004-202 | CALIBRATION STANDARD | 3 | |
| 98S52305005-000 | Calibration Standard, ATR42 PT4 52-31-04:PG404 FIG401 | 4 | |
| 98S52305005-002 | Calibration Standard, ATR72 PT4 52-31-04:PG411 FIG402 | 1 | |
| 98S52305005000 | CALIBRATION STANDARD HL1 | 4 | |
| 98S52305008-200 | Calibration Standard, ATR42-400/500 PT6 52-31-04:PG603 FIG601 | 2 | |
| 98S52305008200 | CALIBRATION STANDARD | 2 | |
| 98S52305009-000 | CALIBRATION STANDARD | 1 | |
| 98S52305017000 | CALIBRATION STANDARD | 1 | |
| 98S523104-ATR72/42 | Calibration Standard, ATR72 PT6 52-31-04: PG603 FIG601, SB52-1057 or SB52-1058 | 1 | |
| 98S53005004200 | CALIBRATION STANDARD | 1 | |
| 98S53005004202 | CALIBRATION STANDARD | 1 | |
| 98S53005005 | Calibration Standard, ATR42 PT6 53-61-03:PG607 FIG601 SHT2 | 1 | |
| 98S53005005-000 | Calibration Standard, ATR42 PT6 53-31-01:PG606 FIG601 SHT1 | 3 | |
| 98S53005006-000 | Calibration Standard, ATR42 PT6 53-31-01:PG606 FIG601 SHT1 | 3 | |
| 98S53005007-000 | Calibration Standard, ATR42 PT6 53-31-04:PG606 FIG601 SHT1 | 2 | |
| 98S53005008-000 | Calibration Standard, ATR42 PT6 53-31-21:PG608 FIG601 SHT1 | 3 | |
| 98S53005008000 | SKIN LAP JOINT CALIBRATION STANDARD | 3 | |
| 98S53005009-000 | Calibration Standard, ATR42 PT6 53-51-02:PG608 FIG601 | 3 | |
| 98S53005010-000 | Calibration Standard, ATR42 PT6 53-51-03:PG606 FIG601 | 3 | |
| 98S53005011-000 | Calibration Standard, ATR42 PT6 53-61-01:PG606 FIG601 SHT1 | 3 | |
| 98S53005012 | Calibration Standard, ATR42 PT6 53-61-03:PG606 FIG601 | 1 | |
| 98S53005012-000 | ATR Standard, ATR42 PT6 53-81-14:PG606 FIG601 SHT1 | 3 | |
| 98S53005013-000 | ATR Standard, ATR42 PT6 53-81-14:PG607 FIG601 SHT2 | 3 | |
| 98S53005014-000 | Calibration Standard, ATR42 PT4 53-56-52:PG405-408 FIG402 | 3 | |
| 98S53005014-000A | Calibration Standard, ATR42 PT4 53-56-52:PG406 FIG402 SHT2 | 1 | |
| 98S53005014-000B | Calibration Standard, ATR42 PT4 53-56-52:PG407 FIG402 SHT3 | 1 | |
| 98S53005014-000C | Calibration Standard, ATR42 PT4 53-56-52:PG408 FIG402 SHT4 | 1 | |
| 98S53005014-000D | Calibration Standard, ATR42 PT4 53-56-52:PG408 FIG402 SHT4 | 1 | |
| 98S53005014-006 | STANDARD CALIBRATION TOOL | 1 | |
| 98S53005014008 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| 98S53005014102 | CALIBRATION STANDARD | 1 | |
| 98S53005015-000 | Calibration Standard, ATR42 PT6 53-51-01:PG608 FIG601 | 3 | |
| 98S53005016-000 | ATR Standard ATR42 PT4 53-51-20 PG 407/408 FG 402 | 3 | |
| 98S53005017-000 | Calibration Standard, ATR42 PT6 53-81-16:PG606 FIG601 | 3 | |
| 98S53005018-000 | Calibration Standard, ATR42 PT6 53-81-16:PG607 FIG601 | 3 | |
| 98S53005020-000 | Calibration Standard, ATR72 PT6 53-00-01:PAGE 608 FIG 601, Includes P1 thru P8 | 4 | |
| 98S53005020-000/1 | ATR CALIBRATION STANDARD ATR72 Part 6 53-00-01 Page 608 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S53005020-000/2 | ATR CALIBRATION STANDARD ATR72 Part 6 53-00-01 Page 609 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S53005020-200 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-202 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-203 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-204 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-205 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-206 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-207 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-208 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005020-209 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-210 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-211 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-212 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-213 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-214 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-215 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-216 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020000 | ALUMINUIM CALIBRATION STEP WEDGE STANDARD FOR ET | 4 | |
| 98S53005021-000 | ATR72 Calibration Standard Drawing PT6 53-51-01 PG 608, Figure 601 | 3 | |
| 98S53005021000 | NDT STANDARD | 3 | |
| 98S53005024-000 | ATR CALIBRATION STANDARD 53-61-03 PT6 PG 606 | 2 | |
| 98S53005024000 | REFERENCE STANDARD | 2 | |
| 98S53005025-000 | ATR CALIBRATION STANDARD 53-61-02 PT 6 PG 606 | 2 | |
| 98S53005025000 | REFERENCE STANDARD | 2 | |
| 98S53005026-000 | ATR CALIBRATION STANDARD 53-61-01-PT6 PG 606 | 2 | |
| 98S53005026000 | REFERENCE STANDARD | 2 | |
| 98S53005027-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-61-01 FIGURE 606 SHEET 1. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005027000 | CALIBRATION STANDARD | 2 | |
| 98S53005028-000 | ATR CALIBRATION STANDARD 53-31-04 PT 6 PG 606 | 2 | |
| 98S53005028000 | REFERENCE STANDARD | 2 | |
| 98S53005029-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-31-01 FIGURE 601 SHEET 1. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005029000 | CALIBRATION STANDARD | 2 | |
| 98S53005030-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-31-21 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005030000 | CALIBRATION STANDARD | 2 | |
| 98S53005031-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-31-04 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005031000 | CALIBRATION STANDARD | 2 | |
| 98S53005032-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-61-01 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005032000 | CALIBRATION STANDARD | 2 | |
| 98S53005033-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-61-02 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005033000 | CALIBRATION STANDARD | 2 | |
| 98S53105000-200 | Calibration Standard, ATR42 PT6 53-11-23:PG612 FIG603 | 2 | |
| 98S53305002-200 | CALIBRATION STANDARD - ATR72 | 4 | |
| 98S53305002-200/19MM | ATR Standard w/ 19mm Lug Hole, ATR72 PT4 53-37-06:PG405 FIG401 SHEET2, 2024T3, .685 thick | 1 | |
| 98S53305002-200/23MM | ATR Standard w/ 23mm Lug Hole, ATR72 PT4 53-37-06:PG405 FIG401 SHEET2, 2024T3, .685 Thick | 1 | |
| 98S53305002200 | CALIBRATION STANDARD | 4 | |
| 98S53305003000 | CALIBRATION STANDARD | 1 | |
| 98S53305004-000 | Calibration Standard, Bonded, ATR72 PT4 53-31-01:PG404 FIG401 | 5 | |
| 98S53305004000 | CALIBRATION STANDARD, BONDED WITH FLAT STRINGER, ATR72 PT4 53-31-01:PG404 FIG401 | 5 | |
| 98S53305005-000 | Calibration Standard, Bonded, ATR72 PT4 53-31-21:PG404 FIG401 | 5 | |
| 98S53305005000 | SKIN STRINGER CALIBRATION STANDARD (ULTRASON) | 5 | |
| 98S53305006-000 | CALIBRATION STANDARD | 3 | |
| 98S53305006-001 | CALIBRATION STANDARD | 1 | |
| 98S53305006000 | REFERENCE STANDARD | 3 | |
| 98S53505003-200 | Calibration Standard, ATR72 PT4 53-56-0: PG405 FIG 402 | 4 | |
| 98S53505003000 | CALIBRATION STANDARD FOR SSI -57-12-12 | 1 | |
| 98S53505003200 | CALIBRATION STANDARD FOR UT | 4 | |
| 98S53505004000 | SKIN CALIBRATION STANDARD STRG;11 AND STRG;17 | 1 | |
| 98S53505005000 | SKIN CALIBRATION STANDARD STRG.4 | 1 | |
| 98S53505006-000 | Calibration Standard, ATR72 PT4 53-51-23:PG408 FIG 403 | 4 | |
| 98S53505006000 | CALIBRATION STANDARD FOR UT | 4 | |
| 98S53605002000 | CALIBRATION STANDARD STR.3, 11ET17 | 1 | |
| 98S53805002 | CALIBRATION STANDARD | 1 | |
| 98S53805002-000 | Calibration Standard, ATR42 PT6 53-61-18:PG609 FIG603 | 6 | |
| 98S53805002000 | CALIBRATION STANDARD | 6 | |
| 98S53805003000 | SKIN CALIBRATION STANDARD STR.4 AND 17 | 1 | |
| 98S54005020200 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020202 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020204 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020206 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020208 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020210 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020212 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020214 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020216 | NDT CALIBRATION STANDARD | 1 | |
| 98S54305001-200 | Calibration Standard, ATR42 PT4 54-31-70 PG403 FIG 401 | 4 | |
| 98S54305001-202 | Calibration Standard, ATR42 PT4 54-31-70 PG409 FIG 401 | 4 | |
| 98S54305001200 | CALIBRATION STANDARD | 4 | |
| 98S54305001202 | CALIBRATION STANDARD | 4 | |
| 98S54305002-200 | Calibration Standard, ATR72 PT4 54-31-70 PG403 FIG 401 | 5 | |
| 98S54305002200 | CALIBRATION STANDARD | 5 | |
| 98S55305011-000 | CALIBRATION STANDARD | 2 | |
| 98S55305011000 | EDDY CURRENT REFERENCE STANDARD | 2 | |
| 98S57105003-200 | Calibration Standard, ATR42 PT4 57-15-21:PG404 FIG401 | 4 | |
| 98S57105003200 | CALIBRATION STANDARD | 4 | |
| 98S57105004-200 | Calibration Standard, ATR72 PT4 57-15-21 PG403 FIG 401 | 4 | |
| 98S57105005-200 | Calibration Standard, ATR42 PT4 57-12-11:PG404 FIG401 | 4 | |
| 98S57105005200 | CALIBRATION STANDARD | 4 | |
| 98S57105006-200 | Calibration Standard, ATR72 PT4 57-12-11 PG404 Figure 401 | 3 | |
| 98S57105007-200 | Calibration Standard, ATR42 PT4 57-14-03:PG403 FIG401 | 2 | |
| 98S57105009-200 | Calibration Standard, ATR42 PT4 57-15-10:PG403 FIG401 | 2 | |
| 98S57105010-200 | Calibration Standard, ATR72 57-15-10 PT4:PG404 FIG402 | 3 | |
| 98S57105010201 | CALIBRATION TOOL STANDARD NDT | 1 | |
| 98S57105011-200 | Calibration Standard, ATR42 PT4 57-15-11:PG403 FIG401 | 3 | |
| 98S57105012-200 | Calibration Standard, ATR72 PT4 57-15-11 PG403 FIG 401 | 3 | |
| 98S57105012200 | REFERENCE STANDARD | 3 | |
| 98S57105013000 | REAR SPAR LOWER SURFACE CALIBRATION STANDARD | 4 | |
| 98S57105013004 | CALIBRATION TOOL STANDARD NDT | 1 | |
| 98S57105014001 | CALIBRATION TOOL STANDARD NDT | 2 | |
| 98S57105014002 | CALIBRATION TOOL STANDARD NDT | 2 | |
| 98S57105014003 | CALIBRATION TOOL STANDARD NDT | 2 | |
| 98S57105015 | Calibration Standard Drawing 57-14-03, Figure 401 | 1 | |
| 98S57105015-200 | ATR REFERENCE STANDARD ATR72 Part 4 57-14-03 Page 403 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105016-200 | ATR CALIBRATION STANDARD Part 6 57-14-04 Page 603 Figure 601. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105019-200 | ATR CALIBRATION STANDARD Part 6 57-14-01 Page 603 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105019000 | CALIBRATION TOOL STANDARD NDT | 1 | |
| 98S57105019200 | CALIBRATION STANDARD FOR NTM 57 14 1 | 3 | |
| 98S57105030-200 | Calibration Standard. ATR42 PT4 57-12-12:PG404 FIG401 | 4 | |
| 98S57105030000 | CALIBRATION STANDARD | 1 | |
| 98S57105030200 | REAR SPAR LOWER SURFACE CALIBRATION STANDARD | 4 | |
| 98S57105031-200 | ATR REFERENCE STANDARD ATR42-400/500 Part 4 57-12-12 Page 404 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S57105031000 | CALIBRATION STANDARD | 1 | |
| 98S57105032-200 | ATR72 Calibration Standard Drawing PT4 57-12-12 PG 404, Figure 401 | 3 | |
| 98S57105032-202 | ATR72 Calibration Standard Drawing PT4 57-12-12 PG 405, Figure 402 | 3 | |
| 98S57105032200 | CALIBRATION STANDARD | 3 | |
| 98S57105032202 | CALIBRATION STANDARD | 3 | |
| 98S57105033-200 | ATR REFERENCE STANDARD ATR42-400/500 Part 4 57-12-11 Page 404 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S57105033200 | CALIBRATION STANDARD | 1 | |
| 98S57105034-200 | ATR REFERENCE STANDARD ATR42-400/500 Part 4 57-14-03 Page 403 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S57105034200 | CALIBRATION STANDARD FOR SSI -57-12-12 | 1 | |
| 98S57105037-000 | Calibration Standard. ATR42 PT4 57-14-00:PG403 FIG401 | 1 | |
| 98S571400 | Calibration Standard, ATR42 PT6 52-14-00:PG603 FIG601 | 1 | |
| 98S57205011000 | CALIBRATION STANDARD FOR SSI -57-12-12 | 1 | |
| 98S57205012000 | TEMPLATE OF LOCATION OF BINDINGS N14 STANDARD | 1 | |
| 98S57205019000 | CALIBRATION STANDARD | 1 | |
| 98S57205023-000 | Calibration Standard, 57-15-06, Part 4, Page 403 Fig 401 | 1 | |
| 98S57205024-200 | ATR Standard, ATR42 PT4 57-24-09:PG403 FIG401 | 3 | |
| 98S57205025-200 | ATR Standard, ATR42 PT4 57-24-10:PG403 FIG401 | 3 | |
| 98S57205026-200 | ATR Standard, ATR42 PT4 57-24-12:PG403 FIG401 | 3 | |
| 98S57205027-200 | ATR Standard, ATR42 PT4 57-24-15:PG403 FIG401 | 3 | |
| 98S57205027-202 | ATR Standard, ATR42 PT4 57-24-15:PG404 FIG402 | 3 | |
| 98S57205029000 | CALIBRATION STANDARD FOR SSI -57-12-12 | 1 | |
| 98S57205030-001 | CARBON CALIBRATION STANDARD | 4 | |
| 98S57205030-002 | CALIBRATION STANDARD | 3 | |
| 98S57205030-003 | CALIBRATION STANDARD | 2 | |
| 98S57205030-004 | COMPOSITE LIGHTNING REFERENCE STANDARD..FOR ATR72 PT 4 51-40-00: REFERENCE DRAWING | 5 | |
| 98S57205030-005 | CALIBRATION STANDARD | 2 | |
| 98S57205030.001 | CALIBRATION STANDARD | 4 | |
| 98S57205030.001-.005 | ATR72 REFERENCE STANDARD SET OF 5 PT 4 51-40-00 | 1 | |
| 98S57205030.002 | CALIBRATION STANDARD | 3 | |
| 98S57205030.003 | CALIBRATION STANDARD | 2 | |
| 98S57205030.004 | CALIBRATION STANDARD | 5 | |
| 98S57205030.005 | ATR72 REFERENCE STANDARD SET OF 5 | 2 | |
| 98S57205030000 | WING UPPER PANEL CALIBRATION STANDARD | 3 | |
| 98S57205030001 | CARBON CALIBRATION STANDARD | 4 | |
| 98S57205030002 | CALIBRATION STANDARD | 3 | |
| 98S57205030003 | CALIBRATION STANDARD | 2 | |
| 98S57205030004 | CARBON CALIBRATION STANDARD | 5 | |
| 98S57205030005 | CALIBRATION STANDARD | 2 | |
| 99-2642 | STANDARD INLINE NOSE ASSEMBLIES | 7 | |
| 99-8033-6000 | COVER-MAIN LANDING WHEEL STANDARD TIRES | 1 | |
| 99-8034-6000 | COVER-NOSE LANDING WHEEL STANDARD TIRES | 1 | |
| 9953103002000 | Airbus Standard Fig 53-15-991-003A Sheet 1 page 6 | 1 | |
| 9970 958 579 | STANDARD CFM56 | 1 | |
| 9970-958-579 | REFERENCE STANDARD | 1 | |
| 999-6807-02 | US REFERENCE STANDARD, EQUIPMENT CALIBRATION PART | 1 | |
| 999-6807-03 | US REFERENCE STANDARD, EQUIPMENT CALIBRATION | 1 | |
| 99A-510-03000-000 | Calibration Standard NDT | 2 | |
| 99A13476-101 | Bombardier Standard, Q400 PT6 52-30-03:PG8 FIG2 | 1 | |
| 99A14144-101 | ET CALIBRATION TEST STANDARDS | 1 | |
| 99A14144−101 | CALIBRATION TEST STANDARDS FOR HFEC AND LFEC INSPE | 1 | |
| 99A14145-011 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| 99A14145-101 | ET CALIBRATION TEST STANDARDS | 1 | |
| 99A14145−011 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| 99A14145−101 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| 99A51003000000 | STANDARD, REFERENCE | 2 | |
| 99A51107299001 | STANDARD, REFERENCE | 5 | |
| 99A51107300000 | STANDARD, CALIBRATON | 5 | |
| 99A51107300000-7075 | AIRBUS REFERENCE STANDARD A330 Part 6 51-10-16 Page 615 Figure 610. Material: 7075. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A51307303000 | STANDARD, CALIBRATION | 1 | |
| 99A52103001000 | Airbus Standard, A320 52-13-04:PG604 FIG603 | 1 | |
| 99A53003001000 | CALIBRATION STANDARD | 1 | |
| 99A53003001001 | CALIBRATION STANDARD | 1 | |
| 99A53003001100 | CALIBRATION STANDARD | 4 | |
| 99A53003001101 | CALIBRATION STANDARD | 8 | |
| 99A53003001101/A1 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. Note: Holes A1-A6 | 2 | |
| 99A53003001101/A13 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. Note: Holes A13-A18 | 1 | |
| 99A53003001101/A7 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. Note: Holes A7-A12 | 1 | |
| 99A53003001102 | CALIBRATION STANDARD (STEEL 35NCD16) | 5 | |
| 99A53003001103 | CALIBRATION STANDARD (AL, AU4G OR 2017A) | 4 | |
| 99A53003001104 | CALIBRATION STANDARD (TI, TA6V) | 4 | |
| 99A53003001105 | CALIBRATION STANDARD (ST, 35NCD16) | 4 | |
| 99A53003001106 | CALIBRATION STANDARD (AL, AU4G OR 2017A) | 4 | |
| 99A53003001106-14MM-25.5MM | Airbus Standard, A320 PT6 51-63-05:PG601 FIG601 SHEET2, 14mm to 25.5mm x .5mm Increments | 1 | |
| 99A53003001107 | CALIBRATION STANDARD (TI, TA6V) | 4 | |
| 99A53003001108 | CALIBRATION STANDARD (ST, 35NCD16) | 4 | |
| 99A53003002000 | REFERENCE STANDARD | 1 | |
| 99A53003003000 | REFERENCE STANDARD | 1 | |
| 99A53003003001101 | ROTARY CALIBRATION STANDARD ALUMINUM | 1 | |
| 99A53003004000 | REFERENCE STANDARD | 1 | |
| 99A53003005000 | STANDARD,REFERENCE | 1 | |
| 99A53003005001 | STANDARD-REFERENCE | 1 | |
| 99A53003007000 | STANDARD-REFERENCE | 1 | |
| 99A5300305001 | CALIBRATION STANDARD | 1 | |
| 99A53103002000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 53-12-50 Page 407/408 Figure 403 Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53103003000 | AIRBUS A300-600 CALIBRATION STANDARD PART 4 53-12-20 PAGE 407 FIGURE 403. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53107215000 | CALIBRATION STANDARD | 5 | |
| 99A53107215000-A300 | Airbus Standard, A300 PT6 53-18-00:PG1F FIG4 - CAA+PRIMER | 1 | |
| 99A53107230000 | STANDARD, CALIBRATION | 1 | |
| 99A53107243000 | CALIBRATION STANDARD | 1 | |
| 99A53107251000 | CALIBRATION STANDARD | 2 | |
| 99A53107260000 | CALIBRATION STANDARD | 1 | |
| 99A53107261000 | REFERENCE STANDARD | 1 | |
| 99A53107263000 | REFERENCE STANDARD | 1 | |
| 99A53107265001 | CALIBRATION STANDARD | 1 | |
| 99A53107269000 | STANDARD, CALIBRATION | 1 | |
| 99A53107270000 | STANDARD, CALIBRATION | 1 | |
| 99A53107275000 | CALIBRATION STANDARD | 1 | |
| 99A53107280000 | REFERENCE STANDARD | 1 | |
| 99A53107282000 | STANDARD, CALIBRATION | 1 | |
| 99A53107283000 | CALIBRATION STANDARD | 2 | |
| 99A53107287000 | CALIBRATION STANDARD | 7 | |
| 99A53107290000 | STANDARD, REFERENCE | 1 | |
| 99A53107297000 | REFERENCE STANDARD | 1 | |
| 99A53203000000 | REFERENCE STANDARD | 1 | |
| 99A53203001000 | REFERENCE STANDARD | 1 | |
| 99A53203002000 | REFERENCE STANDARD | 1 | |
| 99A53203003000 | REFERENCE STANDARD | 1 | |
| 99A53203004000 | REFERENCE STANDARD | 1 | |
| 99A53203005000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 53-12-11 Page 407/408 Figure 403. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53203007000 | Airbus Standard, A300-600 PT4 53-12-23:FIG403 PG404 | 1 | |
| 99A53303006000 | REFERENCE STANDARD | 1 | |
| 99A53307203000 | CALIBRATION STANDARD - | 1 | |
| 99A53307217000 | STANDARD, REFERENCE | 1 | |
| 99A53307218000 | CALIBRATION STANDARD | 1 | |
| 99A53307225000 | CALIBRATION STANDARD | 1 | |
| 99A53307229000 | STANDARD, CALIBRATION | 1 | |
| 99A53307229001 | CALIBRATION STANDARD | 1 | |
| 99A53307233000 | CALIBRATION STANDARD | 1 | |
| 99A53307236000 | CALIBRATION STANDARD | 4 | |
| 99A53307244000 | CALIBRATION STANDARD | 1 | |
| 99A53307249000 | CALIBRATION STANDARD | 1 | |
| 99A53307257000 | CALIBRATION STANDARD | 1 | |
| 99A53307258000 | CALIBRATION STANDARD | 1 | |
| 99A53307264000 | CALIBRATION STANDARD SET | 1 | |
| 99A53307266000 | CALIBRATION STANDARD | 1 | |
| 99A53307267000 | STANDARD, CALIBRATION | 2 | |
| 99A53307267000-2024T3 | Airbus Standard, A300 PT4 53-30-52:PG12 FIG9, 2024 T3 Alum | 1 | |
| 99A53307267000-304 | Airbus Standard, A300 PT4 53-30-52:PG12 FIG9, 304 Stainless | 1 | |
| 99A53307267000-7075T6 | Airbus Standard, A300 PT4 53-30-52:PG12 FIG9, 7075 T6 Alum | 1 | |
| 99A53307274 000 | STANDARD, CALIBRATION | 5 | |
| 99A53307274000 | STANDARD, CALIBRATION | 5 | |
| 99A53307274000-7075 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 6 51-10-16 Page 7 Figure 51-10-16-991-005-A. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53307277000 | STANDARD, REFERENCE | 1 | |
| 99A53307281000 | STANDARD, CALIBRATION | 2 | |
| 99A53307292 001 | STANDARD, REFERENCE | 4 | |
| 99A53307292001 | STANDARD, REFERENCE | 4 | |
| 99A53307292001-MOD | STANDARD, REFERENCE | 1 | |
| 99A53307292002 | CURRENT-VOLTAGE STANDARD | 1 | |
| 99A53307294000 | REFERENCE STANDARD | 2 | |
| 99A53307296000 | REFERENCE STANDARD | 1 | |
| 99A53307301000 | REFERENCE STANDARD | 2 | |
| 99A53307319000 | Airbus Standard, A300 PT4 53-30-14:PG8 FIG4 - CAA + PRIMER + TOPCOAT | 2 | |
| 99A53403000000 | CALIBRATION STANDARD | 1 | |
| 99A53403001000 | CALIBRATION STANDARD | 1 | |
| 99A53403003000 | CALIBRATION STANDARD | 1 | |
| 99A53403003001 | CALIBRATION STANDARD | 3 | |
| 99A53403004000 | CALIBRATION-STANDARD | 1 | |
| 99A53403004001 | REFERENCE STANDARD | 1 | |
| 99A53403005000 | CALIBRATION STANDARD | 1 | |
| 99A53403005001 | REFERENCE STANDARD | 1 | |
| 99A53403006000 | REFERENCE STANDARD | 1 | |
| 99A53403006001 | REFERENCE STANDARD | 1 | |
| 99A53403007000 | Airbus Standard, A300-600 PT6 53-15-78:PG604 FIG603 - CAA+PRIMER+TOPCOAT (top piece only) | 2 | |
| 99A53407254000 | STANDARD, CALIBRATION | 1 | |
| 99A53407285000 | STANDARD, CALIBRATION | 1 | |
| 99A53507286000 | STANDARD, CALIBRATON | 2 | |
| 99A53803000000 | STANDARD-REFERENCE | 1 | |
| 99A53803001000 | STANDARD-REFERENCE | 1 | |
| 99A53803001003 | REFERENCE STANDARD | 1 | |
| 99A53803001003-100 | Airbus Standard, A310 PT6 53-15-84:PG604 FIG603 | 1 | |
| 99A53803001003-101 | Airbus Standard, A310 PT6 53-15-84:PG604 FIG603 | 1 | |
| 99A53803001100 | STANDARD-REFERENCE | 1 | |
| 99A53803001101 | STANDARD-REFERENCE | 1 | |
| 99A53803002000 | REFERENCE STANDARD | 1 | |
| 99A53803003000 | CALIBRATION STANDARD | 1 | |
| 99A53803004000 | STANDARD-REFERENCE | 1 | |
| 99A53803004001 | AIRBUS REFERENCE STANDARD A300-600 53-15-23 FIGURE 603 PROCEDURE A PG. 605-606 . Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53803005000 | STANDARD-REFERENCE | 1 | |
| 99A53803006000 | STANDARD-REFERENCE | 1 | |
| 99A53803008000 | REFERENCE STANDARD, AL | 1 | |
| 99A53803009000 | REFERENCE STANDARD, AL | 2 | |
| 99A53803010000 | REFERENCE STANDARD | 1 | |
| 99A53803011000 | REFERENCE STANDARD | 1 | |
| 99A53803012000 | REFERENCE STANDARD | 1 | |
| 99A53803013000 | REFERENCE STANDARD | 1 | |
| 99A53803014000 | REFERENCE STANDARD | 1 | |
| 99A53803015000 | REFERENCE STANDARD | 1 | |
| 99A53803016000 | REFERENCE STANDARD | 1 | |
| 99A53803017000 | REFERENCE STANDARD | 1 | |
| 99A53803018000 | REFERENCE STANDARD | 1 | |
| 99A53803019000 | REFERENCE STANDARD | 1 | |
| 99A53803020000 | CALIBRATION STANDARD | 1 | |
| 99A53803021000 | REFERENCE STANDARD | 1 | |
| 99A53803022000 | REFERENCE STANDARD | 1 | |
| 99A53803023000 | REFERENCE STANDARD | 1 | |
| 99A53803024 | REFERENCE STANDARD | 1 | |
| 99A53803024000 | NDT REF STANDARD TOOL | 1 | |
| 99A53803027000 | Airbus Standard, A300, 53-15-48, PT4, FIG3, PG7 | 1 | |
| 99A53803028000 | Airbus Standard, A300, 53-15-48, PT4, FIG4, PG8 | 1 | |
| 99A53803029000 | Airbus Standard, A300, 53-15-48, PT4, FIG5, PG9 | 1 | |
| 99A54003098000 | Airbus standard | 1 | |
| 99A54403002000 | STANDARD,REFERENCE | 3 | |
| 99A54403003000 | Ultrasonic Inspection Reference standard A300-600 | 2 | |
| 99A54403004000 | REFERENCE STANDARD | 1 | |
| 99A5440302000 | NDT REF STANDARD BLOCK TOOL | 1 | |
| 99A55107213000 | CALIBRATION STANDARD | 1 | |
| 99A55107262000 | CALIBRATION STANDARD | 1 | |
| 99A55107271000 | REFERENCE STANDARD | 1 | |
| 99A55107288000 | REFERENCE STANDARD | 2 | |
| 99A55107289000 | REFERENCE STANDARD | 2 | |
| 99A55109001000 | REFERENCE STANDARD | 1 | |
| 99A55109002000 | REFERENCE STANDARD | 1 | |
| 99A55109003000 | REFERENCE STANDARD | 1 | |
| 99A55109004000 | REFERENCE STANDARD | 1 | |
| 99A55109005000 | REFERENCE STANDARD | 1 | |
| 99A55307306000 | STANDARD, CALIBRATION | 2 | |
| 99A55407291000 | FUNCTION TEST STANDARD | 5 | |
| 99A55407322000 | Airbus Standard, A330 PT9 NTM 55-40-00:PG906 FIG904, 7175-T7351 | 1 | |
| 99A55507221000 | CALIBRATION STANDARD | 1 | |
| 99A55507222000 | CALIBRATION STANDARD | 1 | |
| 99A55507223000 | CALIBRATION STANDARD | 1 | |
| 99A55507240000 | CALIBRATION STANDARD | 1 | |
| 99A55507241000 | CALIBRATION STANDARD | 1 | |
| 99A55507242000 | CALIBRATION STANDARD | 1 | |
| 99A55507253000 | Ultrasonic Inspection Reference standard A300-600 | 1 | |
| 99A55507262000 | CALIBRATION STANDARD | 1 | |
| 99A57004001285 | CALIBRATION STANDARD | 2 | |
| 99A57004001285-T | Airbus Standard, A300 PT4 57-41-10:PG4 FIG2 - 6AL4V Titanium | 1 | |
| 99A57004001287 | CALIBRATION STANDARD | 1 | |
| 99A57004001287-T | Airbus Standard, A300 PT4 57-41-11:PG5 FIG3 - 6AL4V Titanium | 1 | |
| 99A57004001288 | CALIBRATION STANDARD | 1 | |
| 99A57004001288-T | Airbus Standard, A300 PT4 57-41-11:PG5 FIG3 - 6AL4V Titanium | 1 | |
| 99A57004001289 | CALIBRATION STANDARD | 1 | |
| 99A57004001290 | CALIBRATION STANDARD | 1 | |
| 99A57004001291 | CALIBRATION STANDARD | 1 | |
| 99A57004001292 | CALIBRATION STANDARD | 2 | |
| 99A57004001293 | REFERENCE STANDARD | 1 | |
| 99A57004001296 | CALIBRATION STANDARD | 1 | |
| 99A57004001297 | CALIBRATION STANDARD | 1 | |
| 99A57004001300 | CALIBRATION STANDARD | 1 | |
| 99A57004001301 | REFERENCE STANDARD | 1 | |
| 99A57004001302 | REFERENCE STANDARD | 1 | |
| 99A57004001307 | CALIBRATION STANDARD | 1 | |
| 99A57004001308 | CALIBRATION STANDARD | 1 | |
| 99A57004001309 | REFERENCE STANDARD | 1 | |
| 99A57004001310 | REFERENCE STANDARD | 1 | |
| 99A57004001311 | REFERENCE STANDARD | 1 | |
| 99A57004001320 | CALIBRATION STANDARD | 2 | |
| 99A57004003000 | CALIBRATION STANDARD | 1 | |
| 99A57004005000 | CALIBRATION STANDARD | 1 | |
| 99A57004006000 | CALIBRATION STANDARD | 1 | |
| 99A57004007000 | CALIBRATION STANDARD | 1 | |
| 99A57004008000 | REFERENCE STANDARD | 1 | |
| 99A57004009000 | CALIBRATION STANDARD | 1 | |
| 99A57004010000 | CALIBRATION STANDARD | 1 | |
| 99A57004011000 | CALIBRATION STANDARD | 1 | |
| 99A57004012000 | CALIBRATION STANDARD | 1 | |
| 99A57004013000 | REFERENCE STANDARD | 1 | |
| 99A5700410000 | CALIBRATION STANDARD | 1 | |
| 99A57004101000 | Airbus Standard, A320 PT4 57-21-25:PG403 FIG402 | 6 | |
| 99A57004101000-MOD | AIRBUS REFERENCE STANDARD WITH CERTIFICATE | 1 | |
| 99A57004101000FL | CALIBRATIONSTANDARD | 1 | |
| 99A57103000 | Ultrasonic Inspection Reference standard A310 | 1 | |
| 99A57103000000 | STANDARD-REFERENCE | 1 | |
| 99A57103000001 | STANDARD-REFERENCE | 1 | |
| 99A57103000100 | Airbus Standard A310 PT4 57-10-13:PG404 FIG403 | 1 | |
| 99A57103000101 | Airbus Standard A310 PT4 57-10-13:PG404 FIG403 | 1 | |
| 99A57103000102 | Airbus Standard A310 PT4 57-10-13:PG404 FIG403 | 1 | |
| 99A57103000103 | Airbus Standard A310 PT4 57-10-13:PG404 FIG403 | 1 | |
| 99A57103001000 | REFERENCE STANDARD | 1 | |
| 99A57103002000 | REFERENCE STANDARD | 1 | |
| 99A57103003000 | REFERENCE STANDARD | 1 | |
| 99A57103003001 | REFERENCE STANDARD | 1 | |
| 99A57103004000 | STANDARD-REFERENCE | 1 | |
| 99A57103005000 | STANDARD-REFERENCE | 1 | |
| 99A57103005002 | STANDARD-REFERENCE | 3 | |
| 99A57103007000 | STANDARD-REFERENCE | 2 | |
| 99A57103008000 | REFERENCE STANDARD | 1 | |
| 99A57103008100 | STANDARD-REFERENCE | 1 | |
| 99A57103008101 | STANDARD-REFERENCE | 1 | |
| 99A57103009000 | STANDARD-REFERENCE | 2 | |
| 99A57103010000 | Ultrasonic Inspection Reference Standard A300-600 | 2 | |
| 99A57103011000 | Ultrasonic Inspection Reference Standard A300 | 2 | |
| 99A57103012000 | Ultrasonic Inspection Reference Standard A300 | 2 | |
| 99A57103015000 | CALIBRATION STANDARD | 1 | |
| 99A57103017 | Airbus Standard, A300-600; 57-10-29; PT6; FIG603, PG604 | 1 | |
| 99A57103025000 | STANDARD-REFERENCE | 1 | |
| 99A57103025001 | Ultrasonic Inspection Reference Standard A300 | 3 | |
| 99A57103026000 | REFERENCE STANDARD | 1 | |
| 99A57103027 | REFERENCE STANDARD | 1 | |
| 99A57103027000 | REFERENCE STANDARD | 2 | |
| 99A57103028000 | Ultrasonic Inspection Reference Standard A300-600 | 3 | |
| 99A57103029000 | Ultrasonic Inspection Reference Standard A300 | 4 | |
| 99A57103030000 | Ultrasonic Inspection Reference standard A300 | 4 | |
| 99A57103031000 | STANDARD, REFERENCE | 2 | |
| 99A57103032000 | Airbus Standard, A310, 53-15-74, PT4, PG404, FIG402 | 1 | |
| 99A57103033000 | Ultrasonic Inspection Reference Standard A310 | 2 | |
| 99A57103034000 | Airbus Standard, A310, PT4, 57-10-28, PG404, FIG403 | 1 | |
| 99A57103034001 | AIRBUS A310 CALIBRATION STANDARD PART 4 57-10-28 PAGE 411/412 FIGURE 403 | 1 | |
| 99A57103035001 | Airbus Standard, A310 PT4 57-10-42:PG409 FIG403 | 2 | |
| 99A57103036000 | Ultrasonic Inspection Reference standard A310 | 2 | |
| 99A57103037000 | Ultrasonic Inspection Reference standard A310 | 1 | |
| 99A57103038000 | Ultrasonic Inspection Reference Standard A310 | 2 | |
| 99A57103039000 | Airbus Standard, A310 PT4 57-10-56:PG404 FIG403 | 1 | |
| 99A57103041000 | REFERENCE STANDARD | 3 | |
| 99A57103042000 | REFERENCE STANDARD | 2 | |
| 99A57103043000 | REFERENCE STANDARD | 2 | |
| 99A57103044000 | Ultrasonic Inspection Reference Standard A300-600 | 2 | |
| 99A57103045000 | REFERENCE STANDARD N | 2 | |
| 99A57103046000 | AIRBUS A300-600 CALIBRATION STANDARD PART 4 57-10-52 PAGE 415 FIGURE 403. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103048000 | AIRBUS A300-600 REFERENCE STANDARD PART 4 57-10-36 PAGE 407/408 FIGURE 403. MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103048001 | Airbus A300-600 Reference Standard Part 4 57-10-68 Page 409/410 figure 403. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103050000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-10-64 Page 407/408 Figure 403 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103051000 | AIRBUS STANDARD A300-600 PT4 57-10-22 PG 413/414 FG 403 | 1 | |
| 99A57103053000 | AIRBUS REFERENCE STANDARD A310 Part 4 57-10-07 Page 409/410 Figure 403 Material: 7175 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103054000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-10-24 Page 411/412 Figure 403 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103055000 | AIRBUS STANDARD A310 57-10-08 FIG 408 PG 403 | 1 | |
| 99A57103056000 | AIRBUS A300-600 REFERENCE STANDARD PART 4 57-10-50 PAGE 411 FIGURE 403. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| 99A571043001 | NDT REF STANDARD TOOL | 1 | |
| 99A57104321000 | REFERENCE STANDARD | 1 | |
| 99A57104322000 | REFERENCE STANDARD | 1 | |
| 99A57104323000 | REFERENCE STANDARD | 1 | |
| 99A57104324000 | REFERENCE STANDARD | 1 | |
| 99A57104325000 | REFERENCE STANDARD | 1 | |
| 99A57104326000 | REFERENCE STANDARD | 1 | |
| 99A57104329000 | CALIBRATION STANDARD | 1 | |
| 99A57104330000 | CALIBRATION STANDARD | 1 | |
| 99A57104331000 | REFERENCE STANDARD | 1 | |
| 99A57104332000 | REFERENCE STANDARD | 1 | |
| 99A57104333000 | REFERENCE STANDARD | 1 | |
| 99A57104334000 | REFERENCE STANDARD | 1 | |
| 99A57104335000 | REFERENCE STANDARD | 1 | |
| 99A57104336000 | REFERENCE STANDARD | 1 | |
| 99A57104337000 | REFERENCE STANDARD | 2 | |
| 99A57104338000 | REFERENCE STANDARD | 2 | |
| 99A57104339000 | REFERENCE STANDARD | 1 | |
| 99A57104340000 | REFERENCE STANDARD | 2 | |
| 99A57104341000 | REFERENCE STANDARD | 1 | |
| 99A57104342000 | REFERENCE STANDARD | 1 | |
| 99A57104343000 | REFERENCE STANDARD | 1 | |
| 99A57104344000 | REFERENCE STANDARD | 1 | |
| 99A57104345000 | REFERENCE STANDARD | 1 | |
| 99A57104346000 | REFERENCE STANDARD | 1 | |
| 99A57104347000 | REFERENCE STANDARD | 1 | |
| 99A57104348000 | REFERENCE STANDARD | 1 | |
| 99A57104349000 | REFERENCE STANDARD | 1 | |
| 99A57104350000 | REFERENCE STANDARD | 1 | |
| 99A57104351000 | REFERENCE STANDARD | 1 | |
| 99A57104353000 | REFERENCE STANDARD | 2 | |
| 99A57104353001 | Airbus Standard, A330, 57-26-08, PART4: PG410 FIG404 SHEET3 | 3 | |
| 99A57104354000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-26-08 Page 406/407 Figure 403 (Sheet 2 and 3) Material: Delrin. lncludes Test Report and Certificate of Conformance. | 2 | |
| 99A57104355000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-26-08 Page 406/407 Figure 403 (Sheet 2 and 3) Material: Delrin. lncludes Test Report and Certificate of Conformance. | 3 | |
| 99A57104356000 | REFERENCE STANDARD | 1 | |
| 99A57104357000 | REFERENCE STANDARD | 1 | |
| 99A57104358000 | REFERENCE STANDARD | 1 | |
| 99A57104359000 | REFERENCE STANDARD | 1 | |
| 99A57104360000 | REFERENCE STANDARD | 1 | |
| 99A57104361000 | CALIBRATION STANDARD | 1 | |
| 99A57104362000 | CALIBRATION STANDARD | 1 | |
| 99A57104363000 | REFERENCE STANDARD | 1 | |
| 99A57104363001 | Airbus Standard, A300-600 PT4 57-21-30:PG431 FIG417 | 1 | |
| 99A57104364000 | Airbus Standard, A300-600 PT4 57-21-30:PG432 FIG418 | 1 | |
| 99A57104365000 | Airbus Standard, A300-600 PT4 57-21-30:PG433 FIG419 | 1 | |
| 99A57104365001 | Airbus Standard, A300-600 PT4 57-21-30:PG433 FIG419 | 1 | |
| 99A57204319000 | CALIBRATION STANDARD | 1 | |
| 99A57204344000 | REFERENCE STANDARD | 1 | |
| 99A57204351000 | REFERENCE STANDARD | 1 | |
| 99A57204352000 | REFERENCE STANDARD | 1 | |
| 99A57204354000 | REFERENCE STANDARD | 1 | |
| 99A57204355000 | REFERENCE STANDARD | 1 | |
| 99A57204356000 | REFERENCE STANDARD | 1 | |
| 99A57204357000 | REFERENCE STANDARD | 1 | |
| 99A57204358000 | REFERENCE STANDARD | 1 | |
| 99A57204359000 | REFERENCE STANDARD | 1 | |
| 99A57204360000 | CALIBRATION STANDARD | 2 | |
| 99A57204361000 | REFERENCE STANDARD | 1 | |
| 99A57204362000 | REFERENCE STANDARD | 3 | |
| 99A57204363000 | REFERENCE STANDARD | 1 | |
| 99A57204364000 | REFERENCE STANDARD | 1 | |
| 99A57204365000 | REFERENCE STANDARD | 1 | |
| 99A57204366000 | REFERENCE STANDARD | 1 | |
| 99A57204367000 | CALIBRATION STANDARD | 1 | |
| 99A57204368000 | CALIBRATION STANDARD | 1 | |
| 99A57204368001 | REFERENCE STANDARD | 1 | |
| 99A57204369000 | REFERENCE STANDARD | 1 | |
| 99A57204370000 | REFERENCE STANDARD | 1 | |
| 99A57204371000 | REFERENCE STANDARD | 1 | |
| 99A57204372000 | REFERENCE STANDARD | 1 | |
| 99A57204373000 | REFERENCE STANDARD | 1 | |
| 99A57204374000 | REFERENCE STANDARD | 1 | |
| 99A57204375000 | CALIBRATION STANDARD | 2 | |
| 99A57204376000 | REFERENCE STANDARD | 1 | |
| 99A57204377000 | REFERENCE STANDARD | 1 | |
| 99A57204378000 | REFERENCE STANDARD | 1 | |
| 99A57204379000 | CALIBRATION STANDARD | 2 | |
| 99A57204380000 | REFERENCE STANDARD | 1 | |
| 99A57204381000 | REFERENCE STANDARD | 1 | |
| 99A57204382000 | REFERENCE STANDARD | 1 | |
| 99A57204383000 | REFERENCE STANDARD | 1 | |
| 99A57204384000 | REFERENCE STANDARD | 1 | |
| 99A57204385000 | CALIBRATION STANDARD | 1 | |
| 99A57204386000 | CALIBRATION STANDARD | 1 | |
| 99A57204387000 | CALIBRATION STANDARD | 3 | |
| 99A57204388000 | REFERENCE STANDARD | 1 | |
| 99A57204390000 | REFERENCE STANDARD | 1 | |
| 99A57204390001 | Ultrasonic Inspection Reference Standard A300-600 | 1 | |
| 99A57204390002 | REFERENCE STANDARD | 1 | |
| 99A57204390003 | Airbus Standard, A300-600 PT4 57-21-30:PG410 FIG407 - CAA+PRIMER | 1 | |
| 99A57204391000 | REFERENCE STANDARD | 1 | |
| 99A57204391001 | Airbus Standard, A310, 57-25-28: PG605 FIG604 | 2 | |
| 99A57204392000 | CALIBRATION STANDARD | 1 | |
| 99A57204393000 | REFERENCE STANDARD | 1 | |
| 99A57204394000 | REFERENCE STANDARD | 4 | |
| 99A57204395000 | CALIBRATION STANDARD | 1 | |
| 99A57204399000 | CALIBRATION STANDARD | 1 | |
| 99A57204399001 | Airbus Standard, A310 PT4 57-25-58:PG406 FIG403 | 1 | |
| 99A57204400000 | REFERENCE STANDARD | 1 | |
| 99A57204401000 | REFERENCE STANDARD | 3 | |
| 99A57204402000 | REFERENCE STANDARD | 2 | |
| 99A57204403000 | CALIBRATION STANDARD | 3 | |
| 99A57204403001 | Ultrasonic Inspection Reference standard A310 | 5 | |
| 99A57204404000 | CALIBRATION STANDARD | 1 | |
| 99A57204405000 | CALIBRATION STANDARD | 1 | |
| 99A57204406000 | CALIBRATION STANDARD | 2 | |
| 99A57204407000 | CALIBRATION STANDARD | 1 | |
| 99A57204408000 | CALIBRATION STANDARD | 2 | |
| 99A57204409000 | CALIBRATION STANDARD | 1 | |
| 99A57204410000 | CALIBRATION STANDARD | 2 | |
| 99A57204411000 | CALIBRATION STANDARD | 1 | |
| 99A57204412000 | REFERENCE STANDARD | 1 | |
| 99A57204413000 | CALIBRATION STANDARD | 1 | |
| 99A57204415000 | CALIBRATION STANDARD | 1 | |
| 99A57204418000 | CALIBRATION STANDARD | 1 | |
| 99A57204420000 | CALIBRATION STANDARD | 1 | |
| 99A57204422000 | CALIBRATION STANDARD | 1 | |
| 99A57204423000 | CALIBRATION STANDARD | 1 | |
| 99A57204425000 | Ultrasonic Inspection Reference Standard A300-60 | 2 | |
| 99A57204428000 | Airbus Standard, A310 PT4 57-21-33: PG403 FIG402 | 1 | |
| 99A57204429000 | Airbus Standard, A310, 57-25-45, PART6: PG604 FIG603 | 1 | |
| 99A57204438001 | AIRBUS A310 REFERENCE STANDARD PART4 57-29-01 PAGE 406 FIGURE 403. Includes Test Report and certificate of Conformance. | 2 | |
| 99A57204438001 | REFERENCE STANDARD | 2 | |
| 99A57204453000 | REFERENCE STANDARD | 1 | |
| 99A57204454000 | REFERENCE STANDARD | 2 | |
| 99A5720445500 | REFERENCE STANDARD | 1 | |
| 99A57204455000 | REFERENCE STANDARD | 2 | |
| 99A57303000000 | REFERENCE STANDARD | 1 | |
| 99A57404349000 | CALIBRATION STANDARD | 1 | |
| 99A57504294000 | Airbus Standard, A300-600 PT6 57-52-05:PG607 & 608, FIG602 | 1 | |
| 99A57504295000 | Airbus Standard, A300 PT4 57-51-04:PG6A/6B, FIG2 | 1 | |
| 99A57504296000 | Airbus Standard, A310 PT4 57-51-11:PG404 FIG403 | 3 | |
| 99A57507293000 | STANDARD, CALIBRATION | 1 | |
| 99A57703000000 | STANDARD-REFERENCE | 2 | |
| 99D34403001000 | AIRBUS REFERENCE STANDARD | 1 | |
| 99D5103015000 | REFERENCE STANDARD | 1 | |
| 99D5109001000 | CALIBRATION STANDARD SET AIRBUS | 1 | |
| 99D51103001000 | AIRBUS REFERENCE STANDARD NTM A318/A319/A320/A321, FIGURE 51-10-04-991-014-A. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D51103004000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Page 9 Figure 51-10-04-270-803-A-01. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D51103016000 | AIRBUS REFERENCE STANDARD NTM A318/A319/A320/A321, FIGURE 51-10-31-991-004-A. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D51103017000 | REFERENCE STANDARD | 1 | |
| 99D51107295000 | STANDARD, CALIBRATION | 5 | |
| 99D51307001000 | AIRBUS REFERENCE STANDARD (WIFI BROADBAND) | 1 | |
| 99D51407291000 | CALIBRATION STANDARD | 2 | |
| 99D51407291001 | STANDARD SET, CALIBRATION | 7 | |
| 99D51407291001-3 | Airbus Carbon Standard SET, ALL PT4 51-10-06:FIG402 PG404, Fabric Material #3 | 1 | |
| 99D52041757000 | AIRBUS REFERENCE STANDARD | 1 | |
| 99D52103001000 | STANDARD-REFERENCE | 3 | |
| 99D52103003000 | Reference Standard | 1 | |
| 99D52809001000 | REFERENCE STANDARD | 1 | |
| 99D52809002000 | Airbus Standard A320 | 2 | |
| 99D52809004000 | Airbus reference standard, 52-81-06, Page6 | 7 | |
| 99D53003001108 | AIRBUS REFERENCE STANDARD | 1 | |
| 99D53103000000 | STANDARD-REFERENCE | 5 | |
| 99D53103001000 | STANDARD-REFERENCE | 2 | |
| 99D53103002000 | STANDARD-REFERENCE | 1 | |
| 99D53103003000 | REFERENCE STANDARD | 1 | |
| 99D53107287000 | Reference Standards | 1 | |
| 99D53203000000 | STANDARD-REFERENCE | 1 | |
| 99D53203000002 | REFERENCE STANDARD | 5 | |
| 99D53203001000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 53-00-13-PB6 Page 6 Figure 53-00-13-991-003-A Sheet 1 Material 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D53207304000 | STANDARD, REFERENCE | 5 | |
| 99D53409001000 | REFERENCE STANDARD | 5 | |
| 99D53419001000 | Reference Standards | 1 | |
| 99D54403000000 | STANDARD-REFERENCE | 1 | |
| 99D54403000001 | STANDARD-REFERENCE | 1 | |
| 99D54403000002 | RSTANDARD-EFERENCE | 1 | |
| 99D54403000003 | REFERENCE STANDARD | 1 | |
| 99D54403000004 | Ultrasonic Inspection Reference standard A318-319-320-321 | 7 | |
| 99D54403001000 | STANDARD-REFERENCE | 1 | |
| 99D54403001001 | Airbus Standard, A320 PT6 54-51-01-PB6:PG7 | 1 | |
| 99D54403001002 | CALIBRATION STANDARD | 4 | |
| 99D54403002000 | CALIBRATION-STANDARD | 4 | |
| 99D54403003000 | CALIBRATION-STANDARD | 4 | |
| 99D54403004000 | CALIBRATION-STANDARD | 6 | |
| 99D54403005000 | Reference Standard | 2 | |
| 99D54403006000 | CALIBRATION STANDARD | 1 | |
| 99D54403006001 | CALIBRATION STANDARD | 1 | |
| 99D54403007000 | NDT REFERENCE STANDARD | 3 | |
| 99D54403026000 | REFERENCE STANDARD | 1 | |
| 99D54403030000 | Reference Standards | 1 | |
| 99D54503006000 | AIRBUS STANDARD, A320 54-53-08: FIG54-53-08-991-007-A | 1 | |
| 99D55109001000 | CALIBRATION STANDARD SET | 7 | |
| 99D55109001000-3 | Airbus Carbon Standard, ALL PT4 51-10-06:FIG402 PG404, Tape Material #3 | 1 | |
| 99D55109001000/1MM | AIRBUS A318/A319/A320/A321 CARBON STANDARD PT 4 51-10-06 PAGE 7. MULTIDIRECTIONAL TAPE MATERIAL BLOCK NOMINAL THICKNESS (1mm). Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57003001104 | CALIBRATION STANDARD | 1 | |
| 99D57004000000 | CALIBRATION STANDARD | 4 | |
| 99D57004000040 | REFERENCE STANDARD | 1 | |
| 99D57004000042 | STANDARD CALIBRATION | 1 | |
| 99D57004000402 SET | REFERENCE STANDARD | 1 | |
| 99D57004001000 | CALIBRATION STANDARD | 4 | |
| 99D57004001001 | REFERENCE STANDARD | 1 | |
| 99D57004001002 | REFERENCE STANDARD | 1 | |
| 99D57004002000 | REFERENCE STANDARD | 1 | |
| 99D57103000000 | CALIBRATION-STANDARD | 1 | |
| 99D57103000001 | REFERENCE STANDARD | 1 | |
| 99D57103001000 | CALIBRATION-STANDARD | 1 | |
| 99D57103002000 | CALIBRATION-STANDARD | 3 | |
| 99D57103002001 | CALIBRATION-STANDARD | 5 | |
| 99D57103003000 | CALIBRATION-STANDARD | 1 | |
| 99D57103004000 | CALIBRATION-STANDARD | 4 | |
| 99D57103005000 | REFERENCE STANDARD | 1 | |
| 99D57103005001 | REFERENCE STANDARD | 5 | |
| 99D57103006000 | REFERENCE STANDARD | 5 | |
| 99D57103007000 | REFERENCE STANDARD | 3 | |
| 99D57103008000 | REFERENCE STANDARD | 6 | |
| 99D57103009000 | REFERENCE STANDARD | 4 | |
| 99D57103010000 | REFERENCE STANDARD | 5 | |
| 99D57103011000 | REFERENCE STANDARD | 5 | |
| 99D57103012000 | REFERENCE STANDARD | 6 | |
| 99D57103013000 | STANDARD, REFERENCE | 6 | |
| 99D57103014000 | REFERENCE STANDARD | 5 | |
| 99D57103015000 | Airbus Standard, A320 57-11-47-PB4:FIG 57-11-47-991-012-A: FIG 45 | 4 | |
| 99D57103016000 | REFERENCE STANDARDS | 7 | |
| 99D57103017000 | Ultrasonic Reference standard A318-319-320-321 | 5 | |
| 99D57103018000 | Ultrasonic Reference standard A318-319-320-321 | 4 | |
| 99D57103019000 | Ultrasonic Reference standard A318-319-320-321 | 4 | |
| 99D57103020000 | Airbus Standard, A320 PT4 57-11-74:PG405/406 FIG403 - CAA + PRIMER/TOPCOAT | 3 | |
| 99D5710302100 | AIRBUS STANDARD, A320 57-11-47-PB4: FIG 57-11-47-991-011-A PG 43 | 1 | |
| 99D57103021000 | Airbus Standard, A320 57-11-47-PB4: FIG 57-11-47-991-011-A PG 43 | 5 | |
| 99D57103023000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-12-04-PB4 Page 47 Figure 57-12-04-991-013-A Sheet 1. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57103024000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-12-04-PB4 Page 11 Figure 57-12-04-991-003-A Sheet 1. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57103027000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-12-03-PB4 Page 73 Figure 57-12-03-991-015-A Sheet1 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57103028000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-12-03-PB4 Page 99 Figure 57-12-03-991-020-A Sheet 1 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57103032000 | REFERENCE STANDARD | 2 | |
| 99D57103033000 | REFERENCE STANDARD PART4 | 2 | |
| 99D57103034000 | REFERENCE STANDARD AIRBUS | 2 | |
| 99D57103035000 | REFERENCE STANDARD | 2 | |
| 99D57103036000 | AIRBUS A318/A319/A320/A321 REFERENCE STANDARD PART4 57-11-47-991-003-A . Material: 7075 Aluminum Includes Test Report and certificate of Conformance. | 2 | |
| 99D57204013000 | REFERENCE STANDARD | 1 | |
| 99D57204014000 | REFERENCE STANDARD | 1 | |
| 99D57204101000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 1 | |
| 99D57204103000 | REFERENCE STANDARD | 1 | |
| 99D57204105000 | Reference Standard, A320 PT4 57-26-54-PB4:PG12 - CAA + PRIMER | 5 | |
| 99D57204107000 | REFERENCE STANDARD | 6 | |
| 99D57204111000 | REFERENCE STANDARD | 1 | |
| 99D57204112000 | REFERENCE STANDARD | 1 | |
| 99D57204113000 | CALIBRATION STANDARD | 1 | |
| 99D57204114000 | CALIBRATION STANDARD | 1 | |
| 99D57204115000 | CALIBRATION STANDARD | 1 | |
| 99D57204116000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 3 | |
| 99D57204125000 | Airbus Standard, A320 57-29-03:PG405, FIG 403 | 5 | |
| 99D57204163000 | STANDARD, 3 TITANIUM AIRCRAFT BOLTS (NDT) | 3 | |
| 99D57204163000-A | Reference Standard | 1 | |
| 99D57204163000-B | Reference Standard | 1 | |
| 99D57204163000-C | Reference Standard | 1 | |
| 99D5720416400 | Reference Standard 99D5720416400 | 1 | |
| 99D57204164000 | Airbus Reference Standard, A320 NTM 57-29-07-PB4:PG17 FIG 57-29-07-991-003-A - CAA, PRIMER, TOPCOAT | 4 | |
| 99D57204164001 | Airbus Reference Standard, A320 NTM 57-29-07-PB4:PG18 FIG 57-29-07-991-003-A SHEET 01- CAA, PRIMER, TOPCOAT | 4 | |
| 99D57204166000 | Airbus Standard 57-29-10 PG25 sheet 1 | 1 | |
| 99D57204167000 | Airbus Standard 57-29-10 Sheet 1 PG10 | 2 | |
| 99D57204169000 | Airbus Standard, A318/A319/A320/A321 57-29-11-250-801-A-01 | 3 | |
| 99D57204169001 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 57-29-11-PB6 PG.9. MATERIAL: ABM3-1031(7150-T6 AL), ABM3-1029(7050-T7 AL). Includest Certification and COC. | 1 | |
| 99D57204170000 | Airbus Standard, A318/A319/A320/A321 57-29-11-250-801-A-01 | 3 | |
| 99D57204170001 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 57-29-11-PB6 PG.11. Includes Test Report and Certificate of Conformance | 1 | |
| 99D57204171000 | Airbus Standard, A318/A319/A320/A321 57-29-03-PB4, PG 70 FG 57-29-03-991-014-A SHEET 01 | 2 | |
| 99D57204175000 | Airbus Standard A320 Figure 57-29-13-991-003-A SHEET 01 PG 43 | 4 | |
| 99D57204175000/S | AIRBUS REFERENCE STANDARD A318-A321, 57-29-13-003-A, 4340 | 1 | |
| 99D57204186000 | AIRBUS REFERENCE STANDARD Part 4 57-20-54 Figure 57-20-54-991-018-A. Material:2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57204188000 | AIRBUS A320 CALIBRATION STANDARD FIGURE 2 PROCEDURE D. A320 FWD SPAR LOWER FLANGE RIB 22-27. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57204193000 | AIRBUS CALIBRATION STANDARD, Material AL 7010/7050-T7651, EDM Notch 5mm (H) x 5mm (L) x 0.18mm (W) +/- 0.02mm, Paint all surfaces with primer (Material No. 16-006) . Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57204196000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 57-29-11-PB6 PG.11. MATERIAL: ABM3-1031(7150-T6 AL), ABM3-1029(7050-T7 AL). Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57204197000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 57-29-11-PB6 PG.11. MATERIAL: ABM3-1031(7150-T6 AL), ABM3-1029(7050-T7 AL). Includes Test Report and Certificate of Conformance. Note: Repair Plate = .236" | 1 | |
| 99D57204403001 | STANDARD ETALON | 1 | |
| 99D57504017000 | REFERENCE STANDARD | 1 | |
| 99D57504018000 | REFERENCE STANDARD | 1 | |
| 99D57504100000 | REFERENCE STANDARD | 2 | |
| 99D57504102000 | REFERENCE STANDARD | 4 | |
| 99D57504103000 | REFERENCE STANDARD | 1 | |
| 99D57504103001 | Airbus Standard, A320 PT4 57-51-01:PG405 FIG403 | 3 | |
| 99D57504106000 | REFERENCE STANDARD | 1 | |
| 99D57504107000 | REFERENCE STANDARD | 2 | |
| 99D57504108000 | REFERENCE STANDARD | 2 | |
| 99D57504109000 | Ultrasonic Inspection Reference Standard A318-319-320-321 | 3 | |
| 99D57540170000 | REFERENCE STANDARD | 1 | |
| 99D57540180000 | REFERENCE STANDARD | 1 | |
| 99D57704100000 | REFERENCE STANDARD | 2 | |
| 99D7204125000 | Airbus/FIL/EDSWNU/0824Reference Standard | 1 | |
| 99DTA1511 | STANDARD BLOCK | 1 | |
| 99F-533-03044-000 | Reference Standard NDT | 1 | |
| 99F53103000000 | STANDARD REFERENCE | 3 | |
| 99F53103001000 | Airbus Standard, A340 PT4 53-18-77:PG6 | 1 | |
| 99F53103002000 | Airbus Standard, A340-500/600 PT4; 53-18-81; PG6 | 1 | |
| 99F53103003000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-11-65-PB4 Page 9 Figure 53-11-65-991-00-A Sheet 1. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53103004000 | AIRBUS REFERENCE STANDARD A330-200F PT 4 53-11-08-991-004-A PAGE 1. Material 2024 Aluminum. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53103005000 | AIRBUS REFERENCE STANDARD A330-200F PT 4 53-11-09-991-003-A PAGE 1. Material 2024 Aluminum. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53103006000 | AIRBUS REFERENCE STANDARD A330-200F PT 4 53-11-48-991-004-A PAGE 1. Material 2024 Aluminum. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53103007000 | Airbus Standard A330 53-11-82 FG 53-11-82-991-003-A | 1 | |
| 99F53103009000 | AIRBUS REFERENCE STANDARD A330 PT 4 53-11-08-009-A. MATERIAL: 2024 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53103010000 | AIRBUS REFERENCE STANDARD A330 53-11-79-991-003-A PB4. MATERIAL: 2024-T3 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53107330000 | Airbus A318/A319/A320/A321 Conductivity Standard Block Set SB A320 57-1190 Figure 3. Material: 2024-T3 and 2024-T0 Aluminum. .047", 063" and .080" thickness in each Aluminum Temper Painted with Primer. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53113000000 | AIRBUS A330/200-300 REFERENCE STANDARD PART 4 53-11-96 FIGURE 403 SHEET 1, 2024-T3 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53113002000 | AIRBUS CALIBRATION STANDARD A330-200/300 53-11-55 PAGE 28 FIGURE 53-11-55-013-A. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53113005000 | AIRBUS CALIBRATION STANDARD A330-200/300 53-11-55 PAGE 15 FIGURE 53-11-55-007-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53207310000 | REFERENCE STANDARD | 4 | |
| 99F53207313000 | STANDARD, CALIBRATION | 3 | |
| 99F53207314000 | Airbus Standard, A330 PT6 53-21-36:PG637 FIG620 | 2 | |
| 99F53207316000 | Airbus Standard A330 53-21-36-PB6 PG 16 FIGURE 53-21-36-991-004-A SHEET 01..Calibration Block PN 99F53207316000 | 1 | |
| 99F53207317000 | Airbus Standard A330 53-21-36-PB6 PG 18 FIGURE 53-21-36-991-005-A SHEET 01..Calibration Block PN 99F53207317000 | 1 | |
| 99F53207318000 | Airbus Standard A330 53-21-36-PB6 PG 20 FIGURE 53-21-36-991-006-A SHEET 01..Calibration Block PN 99F53207318000 | 1 | |
| 99F53303000000 | REFERENCE STANDARD | 1 | |
| 99F53303000001 | AIRBUS CALIBRATION STANDARD A340-200/-300 FIGURE 53-31-39-991-003-A. MAERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303001000 | REFERENCE STANDARD | 1 | |
| 99F53303001001 | Airbus Standard, A340/-200/-300 53-31-39-PB4 PG 20 FG 53-31-39-991-008-A SHEET 01 - CAA+PRIMER+TOPCOAT | 1 | |
| 99F533030011000 | REFERENCE STANDARD | 1 | |
| 99F53303002000 | STANDARD,REFERENCE | 1 | |
| 99F53303003000 | REFERENCE STANDARD | 1 | |
| 99F53303004000 | REFERENCE STANDARD | 1 | |
| 99F53303005000 | STANDARD,REFERENCE | 2 | |
| 99F53303006000 | REFERENCE STANDARD | 1 | |
| 99F53303007000 | STANDARD REFERENCE | 1 | |
| 99F53303008000 | STANDARD,REFERENCE | 1 | |
| 99F53303008001 | Airbus Standard, A330 PT4 53-31-07-PB4:FIG53-31-07-991-005-A -- CAA+PRIMER | 2 | |
| 99F53303009000 | STANDARD,REFERENCE | 1 | |
| 99F53303010000 | Airbus Standard, A330/A340 PT4 53-31-14:PG405 FIG403 | 2 | |
| 99F53303011000 | Airbus Standard, A330 PT4 53-31-56:FIG403 PG405 - CAA+PRIMER+TOPCOAT | 1 | |
| 99F53303012000 | REFERENCE STANDARD | 2 | |
| 99F53303013000 | REFERENCE STANDARD | 2 | |
| 99F53303014000 | REFERENCE STANDARD | 1 | |
| 99F53303014001 | Airbus Standard, A330 PT4 53-31-05:PG404 FIG403 - CAA+PRIMER | 1 | |
| 99F53303015000 | Airbus Standard, A330 PT4 53-31-13:PG404 FIG403 - CAA+PRIMER | 2 | |
| 99F53303017000 | REFERENCE STANDARD | 3 | |
| 99F53303018000 | STANDARD REFERENCE | 3 | |
| 99F53303019000 | Airbus Standard, A330 PT4 53-11-30:PG404 FIG403 - CAA+PRIMER+TOPCOAT | 3 | |
| 99F53303020000 | Ultrasonic Inspection Reference standard A300 | 3 | |
| 99F53303021000 | REFERENCE STANDARD | 3 | |
| 99F53303023000 | REFERENCE STANDARD | 1 | |
| 99F53303026000 | REFERENCE STANDARD | 1 | |
| 99F53303027000 | REFERENCE STANDARD | 1 | |
| 99F53303029000 | Airbus Standard, A330 PT6 53-31-45:PG607 FIG603 - CAA + P+T | 2 | |
| 99F53303030000 | Airbus Standard, A330, 53-30-19-PB6 PG 9 FIG 53-30-19-991-003-A SHEET 01 | 1 | |
| 99F53303031000 | Airbus Standard, A340, 53-18-30, PT4, PG7 | 1 | |
| 99F53303034000 | Airbus Standard, A340-500/600, 53-38-24, PART4: PG413/414 FIG403 | 1 | |
| 99F53303035000 | Airbus Standard, A340-500/600, 53-38-24, PART4: PG437/438 FIG408 | 1 | |
| 99F53303036000 | Airbus Standard, A340-500/600 PT4; 53-38-85; PG6 | 1 | |
| 99F53303037000 | Airbus Standard, A340-500/600 PT4; 53-38-85; PG14 | 1 | |
| 99F53303039000 | Airbus Standard, A340-500/600 PT4; 53-38-68; PG6 | 2 | |
| 99F53303040000 | Airbus Standard, A340 PT4 53-38-68:PG16 | 1 | |
| 99F53303041000 | Airbus Standard, A340 PT4 57-38-61: PG7 | 2 | |
| 99F53303042000 | Airbus Standard, A340 PT4 57-38-62: PG5 | 1 | |
| 99F53303044000 | Airbus Standard, A340 PT4 53-38-20:PG9 | 1 | |
| 99F53303046000 | Airbus Standard, A340 PT4 53-38-62:PG12 | 1 | |
| 99F53303047000 | Airbus Standard, A340 PT4 53-38-62:PG20 | 1 | |
| 99F53303048000 | Airbus Standard, A340 PT4 53-38-62:PG29 | 1 | |
| 99F53303057000 | Airbus Standard, A340 PT4 53-38-22:PG14 | 1 | |
| 99F53303058000 | Airbus Standard, A340-500/600 PT4 53-39-07: PG409 FIG403 | 1 | |
| 99F53303059000 | Airbus Standard, A340-500/600 PT4 53-39-07: PG425 FIG408 | 1 | |
| 99F53303060000 | Airbus Standard, A340-500/600 PT4 53-39-07: PG441 FIG413 | 1 | |
| 99F53303061000 | Airbus Standard, A340-500/600 PT4 53-39-07: PG461/462 FIG418 - CAA + PRIMER | 1 | |
| 99F53303062000 | Airbus Standard, A340-500/600 PT4 53-39-07: PG477/478 FIG423 - CAA + PRIMER | 1 | |
| 99F53303063000 | Airbus Standard, A340-500/600 PT4; 53-38-73; PG6 | 1 | |
| 99F53303064000 | Airbus Standard, A340-500/600 PT4; 53-38-73; PG24 | 1 | |
| 99F53303065000 | Airbus Standard, A340-500/600 PT4; 53-38-77; PG6 | 2 | |
| 99F53303066000 | Airbus Standard, A340-500/600 PT4; 53-38-77; PG15 | 2 | |
| 99F53303067000 | Airbus Standard, A340 PT4 53-38-79 PG414, FIG403, Sheet 1 | 1 | |
| 99F53303068000 | Airbus Standard, A340 PT4 53-38-79 PG416, FIG404, Sheet 1 | 1 | |
| 99F53303069000 | Airbus Standard, A340 PT4 53-38-79 PG447, FIG411, Sheet 1 | 1 | |
| 99F53303073000 | Airbus Standard, A340 PT4 53-38-19, PG8, PLUS PRIMER, PTF | 1 | |
| 99F53303080000 | Airbus Standard A340-500/600 PT4 pg 407-408 fg 403 | 1 | |
| 99F53303084000 | Airbus Standard A340 53-38-19 | 1 | |
| 99F53303085000 | Airbus Standard A330 53-31-62 | 1 | |
| 99F53303086000 | REFERENCE STANDARD | 5 | |
| 99F53303087000 | REFERENCE STANDARD | 4 | |
| 99F53303088000 | Airbus Standard A330 53-31-11-PB4 PG31 | 1 | |
| 99F53303090000 | Airbus Standard A340-200/-300 53-31-12-PB4 PG6 | 1 | |
| 99F53303091000 | Airbus standard A330/A340 53-31-12 Part 4 sheet 1 figure 401 | 1 | |
| 99F53303092000 | AIRBUS REFERENCE STANDARD Figure 53-31-96-991-003-A. Material: 2024-R3 or Equivalent. Includes Test Report and Certificate of Conformance | 1 | |
| 99F53303094000 | Airbus Standard A330 53-30-22PB4 PG10 | 2 | |
| 99F53303095000 | Airbus standard A340-200/300 53-30-24-PB4 PG8 | 2 | |
| 99F53303096000 | Airbus Standard A340-200/-300 53-30-29 -PB4 PG10 | 1 | |
| 99F53303097000 | Airbus Standard A340 Part 4 figure 403 sheet 1 57-11-70 page 408 | 2 | |
| 99F53303098000 | AIRBUS A340 REFERENCE STANDARD | 1 | |
| 99F53303099000 | AIRBUS STANDARD A340 53-31-51 | 3 | |
| 99F53303100000 | Airbus Standard 53-30-51 | 1 | |
| 99F53303101000 | Airbus Standard 53-30-52 Sheet 1 PG 8 | 2 | |
| 99F53303103000 | AIRBUS STANDARD A340 53-31-89 | 1 | |
| 99F53303104000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-30-65 Figure 53-30-65-991-008-A. Material: 2024. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303105000 | AIRBUS A330 REFERENCE STANDARD. 53-30-30-991-003-A , PAGE 6. FUSELAGE LONGITUDINAL BUTT JOINT ATSTR 30, FROM 38 TO FR 40, LH/RH. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303107000 | AIRBUS REFERENCE STANDARD A340-500/-600 53-39-08-22-23. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303108000 | AIRBUS REFERENCE STANDARDS A340-500/-600 53-39-08-22-23. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303109000 | AIRBUS REFERENCE STANDARD A340-500/-600 53-39-19-270-801-A-01. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303111000 | REFERENCE STANDARD | 1 | |
| 99F53303113000 | REFERENCE STANDARD | 1 | |
| 99F53303115000 | Airbus Standard, A330 53-30-50-270-801-A-01 | 3 | |
| 99F53303118000 | AIRBUS REFERENCE STANDARD A330-A340/200-300 Part 4 53-30-23 Page 407 Figure 403 Sheet 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303119000 | AIRBUS A330 REFERENCE STANDARD PART 4 53-30-70-991-008-A PAGE 7. MATERIAL: 7050 or EQUIVALENT. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303119001 | AIRBUS A330 REFERENCE STANDARD PART 4 53-30-70 PAGE 9. MATERIAL: 7050 or EQUIVALENT. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303120000 | AIRBUS A330-300/A340-200 CALIBRATION STANDARD 53-30-28 FIGURE 53-30-28-005-A. MATERIAL: 7075-T7351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303121000 | AIRBUS A330 REFERENCE STANDARD PART 4 53-30-71-991-004-A SHEET 1, 7175-T7351 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53303125000 | ARIBUS REFERENCE STANDARD A330 Part 6 53-30-72 Figure 53-30-72-991-012-A. Material: 2024-T3 and 7075-T7. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303127000 | AIRBUS REFERENCE STANDARD Part 4 53-30-09 Figure 53-30-09-991-015-A. Material: 2024-T4. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53307305001 | STANDARD, REFERENCE | 5 | |
| 99F53507256000 | STANDARD, CALIBRATION | 2 | |
| 99F54403000000 | REFERENCE STANDARD | 1 | |
| 99F54403000001 | Airbus Standard, A330 PT4 54-51-38:PG404 FIG403 - H13 steel | 1 | |
| 99F54403001000 | REFERENCE STANDARD | 1 | |
| 99F54403001001 | Airbus Standard, A330 PT4 54-51-39-PB4:PG9 FIG54-51-39-991-003-A..H13 Steel (40CVD12) | 1 | |
| 99F54403002000 | STANDARD,REFERENCE | 1 | |
| 99F54403002001 | STANDARD, REFERENCE | 5 | |
| 99F54403002002 | Airbus Standard, A330 PT4 54-51-40-PB4: FIG54-51-40-991-008-A PG20 | 3 | |
| 99F54403003000 | REFERENCE STANDARD | 1 | |
| 99F54403004000 | Airbus Standard, A340 PT4 54-58-04:PG7 | 1 | |
| 99F54503000000 | STANDARD, REFERENCE | 2 | |
| 99F54503005000 | REFERENCE STANDARD | 2 | |
| 99F54503006000 | REFERENCE STANDARD | 2 | |
| 99F54503009000 | Airbus Standard, A330 PT4 54-51-40-PB4: FIG54-51-40-991-014-A PG46 | 2 | |
| 99F54503010000 | Airbus Standard, A330 PT4 54-51-40-PB4: FIG54-51-40-991-019-A PG63 | 2 | |
| 99F54503011000 | Airbus Standard, A330 PT4 54-51-40-PB4: FIG54-51-40-991-024-A PG33 | 2 | |
| 99F54503012000 | Airbus Standard, A330 PT4 54-51-04-PB6: FIG 54-51-04-991-061-A PG 28 | 2 | |
| 99F54503015000 | AIRBUS REFERENCE STANDARD A330 54-54-19-991-003-A. MATERIAL: TA6V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F54530090000 | REFERENCE STANDARD | 1 | |
| 99F54603005000 | REFERENCE STANDARD | 1 | |
| 99F55109001000 | Airbus Standard, A330 PT4 55-10-09:PG404 FIG403 | 2 | |
| 99F55109002000 | Airbus Standard, A330 PT4 55-10-09:PG405 FIG404 | 2 | |
| 99F57004100000 | CALIBRATION STANDARD | 1 | |
| 99F57004100001 | Airbus Standard, A330 57-21-83-PB4 PG 12 FIG 57-21-83-991-005-A SHEET 01 OR A340 57-00-11-PB4:PG5 FIG 57-00-11-991-002-A - CAA+PRIMER | 4 | |
| 99F57004101000 | CALIBRATION STANDARD | 1 | |
| 99F57004101001 | Airbus Standard, A330 57-00-11-PB4, Fig 57-00-11-991-003-A, Pg 12 | 4 | |
| 99F57004102000 | CALIBRATION STANDARD | 1 | |
| 99F57103001000 | REFERENCE STANDARD | 1 | |
| 99F57103003000 | REFERENCE STANDARD | 1 | |
| 99F57103005000 | REFERENCE STANDARD | 1 | |
| 99F57103006000 | Airbus Standard, A330 PT4 57-11-48:PG407 FIG403 OR A340 57-11-48-PB4:FIG 57-11-48-991-003-A PG6 | 1 | |
| 99F57103007000 | Airbus Standard, A330 PT4 57-11-44:PG409 FIG403 - CAA+P | 3 | |
| 99F57103008000 | REFERENCE, STANDARD | 2 | |
| 99F57103009000 | Airbus Standard, A340 57-11-38-PB4: FIG57-11-38-991-003-A PG6 - CAA + PRIMER | 1 | |
| 99F57103010000 | Airbus Standard, A330 PT4 57-11-52:PG415 FIG408 - CAA+PRIMER+TOPCOAT | 2 | |
| 99F57103011000 | Airbus Standard, A330 PT4 57-11-52:PG404 FIG403 - CAA+PRIMER+TOPCOAT | 2 | |
| 99F57103012000 | Airbus Standard, A330 PT4 57-11-22:PG404 FIG403 | 1 | |
| 99F57103012001 | Airbus Standard, A330 57-11-22-PB4 FG 57-11-22-991-008-A SHEET 01 PG 9 | 1 | |
| 99F57103014000 | Airbus Standard, A330 PT4 57-11-21:PG4074 FIG403 - CAA+P+T | 1 | |
| 99F57103015000 | Airbus Standard, A340-200/-300 PT4 57-11-47-PB4:PG6 SHEET1 | 1 | |
| 99F57103016001 | Airbus Standard, A330 PT4 57-11-46:PG411 FIG403 SHT1 - CAA+P+T | 1 | |
| 99F57103017000 | Airbus Standard, A330 PT4 57-11-59:PG404 FIG403 - CAA+P+TOP | 3 | |
| 99F57103018000 | Airbus Standard, A330 PT4 57-11-45:PG409 FIG403 - CAA+P+T | 2 | |
| 99F57103019000 | Airbus Standard, A330 PT4 57-11-25:PG404 FIG403 - CAA-P+T | 4 | |
| 99F57103026000 | Airbus Standard, A340 57-11-62-PB4: FIG57-11-62-991-003-A PG6 - CAA + PRIMER + TOPCOAT | 1 | |
| 99F57103028000 | Airbus Standard 57-11-63-991-007-E SHEET 01 Page 20 | 2 | |
| 99F57103029000 | Airbus A330 Reference Standard, PT4, 57-11-57, PG13 | 1 | |
| 99F57103030000 | Airbus A330 Reference Standard, PT4, 57-11-58, PG11 | 1 | |
| 99F57103031000 | AIRBUS REFERENCE STANDARD Figure 57-11-10-991-033-A. Includes Test Report and Certificate of Conformance | 2 | |
| 99F57103032000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-11-22 Page7 Figure 57-11-22-991-003-A. Material: Aluminum Alloy. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F57103033000 | Airbus Standard, A340 PT4 57-18-09:PG5 | 1 | |
| 99F57103035000 | Airbus Standard, A340 PT4 57-18-09:PG13 | 2 | |
| 99F57103036000 | Airbus Standard A340-500/-600 57-18-08-PB4 PG 5 FG 57-15-08-991-003-A | 1 | |
| 99F57103037000 | Airbus Standard, A340 PT4 57-18-09:PG20 | 2 | |
| 99F57103039000 | Airbus Standard, A340 PT4 57-18-04:PG6 | 1 | |
| 99F57103040000 | Airbus Standard Figure 57-18-11-991-003-A Sheet 1 page 5 | 1 | |
| 99F57103041000 | Airbus Standard Figure 57-18-11-991-008-A Sheet 1 page 13 | 2 | |
| 99F57103042000 | Airbus Standard Figure 57-18-11-PB4 | 1 | |
| 99F57103042001 | Airbus Standard A340 57-18-13-991-010 | 2 | |
| 99F57103043000 | Airbus Standard Figure 57-18-11-PB4 page 20.. | 1 | |
| 99F57103044000 | Airbus Standard A340-500/-600 57-18-11-pb6 Pg 11 Fg 57-18-11-991-026-A Sheet 01 | 1 | |
| 99F57103045000 | Airbus Standard Figure 57-18-11-PB6 Page 20.. | 1 | |
| 99F57103046000 | reference standard | 1 | |
| 99F57103047000 | Airbus Standard, A340 PT4 57-18-020:PG11 | 1 | |
| 99F57103048000 | Airbus Standard 57-11-63-991-016-E SHEET 01 Page 46 | 2 | |
| 99F57103049000 | REFERENCE STANDARD | 1 | |
| 99F57103050000 | REFERENCE STANDARD | 1 | |
| 99F57103051000 | NDT # REFERENCE STANDARD | 1 | |
| 99F5710305200 | Airbus Standard A330 57-11-71 section 403 page 406 | 1 | |
| 99F57103052000 | NTM571171,REFERENCE STANDARD | 1 | |
| 99F57103053000 | Airbus Standard A330 NTM 57-11-66 | 1 | |
| 99F57103054000 | Airbus Standard A330 NTM 57-20-96 FG 57-20-96-991-003-A | 2 | |
| 99F57103056000 | AIRBUS REFERENCE STANDARD A340-500/600 57-18-25-991-004-A . Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57103057000 | AIRBUS REFERENCE STANDARD A330 PT 4 57-11-79-991-003-A. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57103059000 | AIRBUS REFERENCE STANDARD 57-11-68-991-007-A. MATERIAL: 7175 or 7075 ALUMINUM WITH PROTECTIVE FINISH 13-002 and PAINT PRIMER 16-006. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57113020000 | Airbus Standard, A340-200/-300 PT4 57-11-51-PB4:PG6 SHEET1 | 1 | |
| 99F57203000000 | Airbus Standard, A330 PT4 57-20-84:PG409 FIG403 - CAA+P | 1 | |
| 99F57203001000 | NTM572084, REFERENCE STANDARD | 1 | |
| 99F57203002000 | AIRBUS REFERENCE STANDARD A330 PT 4 57-20-86-991-003-A. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57204102000 | Airbus Standard, A330 PT4 57-20-16:PG405 FIG403 - CAA+PRIMER | 7 | |
| 99F57204105000 | AIRBUS REFERENCE STANDARD Part 4 57-20-49 Figure 57-20-49-991-006-A. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F57204106000 | CALIBRATION STANDARD | 4 | |
| 99F57204107000 | REFERENCE STANDARD | 1 | |
| 99F57204108000 | REFERENCE STANDARD | 3 | |
| 99F57204109000 | REFERENCE STANDARD | 1 | |
| 99F57204109001 | Airbus Standard w/ Certs, A330 57-26-10: FIG404 PG405 - CAA | 2 | |
| 99F57204110000 | REFERENCE STANDARD | 1 | |
| 99F57204111000 | REFERENCE STANDARD | 1 | |
| 99F57204112000 | REFERENCE STANDARD | 1 | |
| 99F57204113000 | REFERENCE STANDARD | 1 | |
| 99F57204114000 | REFERENCE STANDARD | 1 | |
| 99F57204115000 | REFERENCE STANDARD | 1 | |
| 99F57204116000 | REFERENCE STANDARD | 1 | |
| 99F57204117000 | REFERENCE STANDARD | 1 | |
| 99F57204118000 | REFERENCE STANDARD | 1 | |
| 99F57204120000 | REFERENCE STANDARD | 4 | |
| 99F57204124000 | Airbus Standard, A340-500/600, 57-26-59-PB6, : PG17-18 FIG57-26-59-991-005-A sheet 01 | 2 | |
| 99F57204124001 | Airbus Standard w/ Certs, A340 57-26-08-PB4:PG12 FIG57-26-08-991-012-A - CAA | 1 | |
| 99F57204128000 | REFERENCE STANDARD | 1 | |
| 99F57204128001 | Airbus Standard, w/ Certs, A340 57-26-09-PB4 PG 12 | 1 | |
| 99F57204129000 | PROBE JIG STANDARD | 1 | |
| 99F57204130000 | Airbus Standard, A330 PT4 57-20-47:PG407 FIG405 SHEET1 - CAA ONLY | 4 | |
| 99F57204131000 | REFERENCE STANDARD | 1 | |
| 99F57204134000 | AIRBUS REFERENCE STANDARD A340 PT 4 57-26-08. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57204135000 | REFSTD REFERENCE STANDARD | 4 | |
| 99F57204136000 | Airbus Standard, A330/A340 PT4 57-20-52:PG407 FIG403 SHEET1 | 4 | |
| 99F57204137000 | Airbus Standard, A330/A340 PT4 57-20-52:PG407 FIG403 SHEET1 | 4 | |
| 99F57204138001 | Airbus Standard, A330/A340 PT4 57-20-52:PG407 FIG403 SHEET1 | 4 | |
| 99F57204140000 | Airbus Standard, A330 PT6 57-20-02:PG405 FIG403 - CAA+PRIMER | 2 | |
| 99F57204144000 | Airbus Standard, A330 PT4 57-20-93:PG405 FIG403 SHT1 - CAA+PRIMER | 3 | |
| 99F57204145000 | Airbus Standard, A330 PT4 57-20-15:PG404 FIG402 SHT1 - CAA+PRIMER | 4 | |
| 99F57204146000 | Airbus Standard, A330 PT4 57-20-49:PG406 FIG403 SHT1 - CAA+PRIMER | 4 | |
| 99F57204162000 | STANDARD-CALIBRATION | 1 | |
| 99F57204171000 | Airbus Standard A340 57-26-59 | 1 | |
| 99F57204172000 | AIRBUS NDT REFERENCE STANDARD | 2 | |
| 99F57204173000 | AIRBUS A330 REFERENCE STANDARD 57-20-46-270-801-A-01 PAGE 12. OUTER WING REAR SPAR UPPER & LOWER FLANGES BETWEEN RIB7 and RIB12 LH/RH. MATERIAL: 7010 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F57204174000 | AIRBUS REFERENCE STANDARD A330 57-20-46-991-005-A PAGE 13. US INSPECTION OF OUTER WING REAR SPAR FWD FACE BETWEEN RIB 7 AND RIB 12 INCLUDING TOP AND BOTTOM FLANGES Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57204175000 | AIRBUS REFERENCE STANDARD A330 57-20-46-991-005-A PAGE 13. US INSPECTION OF OUTER WING REAR SPAR FWD FACE BETWEEN RIB 7 AND RIB 12 INCLUDING TOP AND BOTTOM FLANGES Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57204176000 | AIRBUS REFERENCE STANDARD A330 57-20-46-991-005-A PAGE 13. US INSPECTION OF OUTER WING REAR SPAR FWD FACE BETWEEN RIB 7 AND RIB 12 INCLUDING TOP AND BOTTOM FLANGES Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57204177000 | AIRBUS REFERENCE STANDARD A330 57-20-46-991-005-A PAGE 13. US INSPECTION OF OUTER WING REAR SPAR FWD FACE BETWEEN RIB 7 AND RIB 12 INCLUDING TOP AND BOTTOM FLANGES Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57244001000 | AIRBUS A330 REFERENCE STANDARD PART 4 57-24-04-991-010-A SHEET 1, 2024-T351 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F57404001000 | AIRBUS STANDARD, A330/A340 NTM 57-11-46 FG 57-11-46-991-001-A | 1 | |
| 99F57500001000 | Airbus Standard, A340-200/-300 57-29-02-PB4: FIG 57-29-02-991-003-A - CAA+PRIMER+TOPCOAT | 2 | |
| 99F57603000000 | REFERENCE STANDARD | 1 | |
| 99F576030004000 | Airbus Reference Standard | 1 | |
| 99F57603001000 | Airbus Standard, A330 PT4 57-61-16: PG404 FIG403 - CAA+PRIMER | 1 | |
| 99F57603002000 | Airbus Standard, A330, 57-61-06, PART4: PG404 FIG403 | 1 | |
| 99F57603003000 | Airbus Standard, A330, 57-61-14 | 1 | |
| 99F57603004000 | Airbus Standard A330 57-61-14 PB4 sheet 1 page 6 | 2 | |
| 99F57603005000 | Airbus Standard A330 57-61-14 Sheet 1 PG17 | 1 | |
| 99F57603006000 | AIRBUS REFERENCE STANDARD A330-200F PT 4 57-61-21-991-003-A PAGE 1. Material 2024 Aluminum. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99GP-06-OLAD | OFFSET NOSE ASSY HUCK POWER RIVETERS (STANDARD EXTENDED) | 1 | |
| 99GP-06-ORAD | OFFSET NOSE ASSY HUCK POWER RIVETERS (STANDARD) | 1 | |
| 99L52103000000 | Airbus Standard A380 Figure 52-81-01-991-012-A | 1 | |
| 99L52107325000 | Airbus Standard A380 52-18-02 PG 15 | 1 | |
| 99L53103000000 | Airbus Standard A380 53-11-03 | 1 | |
| 99L53103001000 | Airbus Standard A380 53-11-12 | 1 | |
| 99L53103002000 | A380-800 REFERENCE STANDARD 2024 ALUMINUM; FIGURE:53-11-03-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103004000 | Airbus Standard A380 53-11-09 | 1 | |
| 99L53103005000 | Airbus Standard A380 53-11-23 | 1 | |
| 99L53103006000 | Airbus Standard A380 53-11-07 | 1 | |
| 99L53103008000 | Airbus Standard A380 53-11-11 | 1 | |
| 99L53103010000 | Airbus Standard A380 53-31-24 | 1 | |
| 99L53103012000 | Airbus Standard A380 53-31-22 | 1 | |
| 99L53103013000 | A380 REFERENCE STANDARD 7010 OR EQUIVALENT ALUMINUM; FIG.53-11-20-991-003-A SHEET 1. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103020000 | AIRBUS A380 REFERENCE STANDARD FIGURE 7 53-11-10-010-A PG. 25. Material: 7075-T751 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103021000 | AIRBUS A380 REFERENCE STANDARD FIGURE 6 53-11-02-009-A PG. 17-18. Material: 7075-T7 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53113002000 | AIRBUS A380 REFERENCE STANDARD FIGURE 6 53-11-10-009-A PG. 24. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303000000 | Airbus Standard A380 53-31-37 | 1 | |
| 99L53303001000 | Airbus Standard A380 53-31-36-991-003-A | 1 | |
| 99L53303002000 | Airbus Standard 53-31-22 | 1 | |
| 99L53303003000 | Airbus standard 53-31-22 | 1 | |
| 99L53303004000 | Airbus Standard 53-31-22 | 1 | |
| 99L53303005000 | Airbus Standard A380 53-31-21-991-003-A | 1 | |
| 99L53303006000 | Airbus Standard A380 53-31-29 | 1 | |
| 99L53303007000 | Airbus Standard A380 53-31-29 | 1 | |
| 99L53303008000 | Airbus Standard A380 53-31-19-991-003-A | 1 | |
| 99L53303009000 | Airbus Standard A380 53-31-20 | 1 | |
| 99L53303010000 | Airbus Standard A380 53-31-08 | 1 | |
| 99L53303015000 | Airbus Standard A380 53-31-10 | 1 | |
| 99L533030150000 | Airbus Standard 53-31-10 | 1 | |
| 99L53303016000 | Airbus Standard A380 53-31-30 | 1 | |
| 99L53303017000 | Airbus Standard A380 53-31-30 | 1 | |
| 99L53303018000 | Airbus Standard A380 53-31-16 | 1 | |
| 99L53303019000 | Airbus Standard A380 53-31-11-991-003-A | 1 | |
| 99L5330302200 | Airbus Standard 53-31-12 | 1 | |
| 99L53303022000 | Airbus Standard 53-31-12 | 1 | |
| 99L53303024000 | Airbus Standard 53-31-22 | 1 | |
| 99L53303027000 | AIRBUS REFERENCE STANDARD A380-800 53-31-37-991-013A. MATERIAL: 7475 OR EQUIVALENT 7050 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303030000 | AIRBUS REFERENCE STANDARD A380-800 53-31-62-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303031000 | AIRBUS REFERENCE STANDARD A380-800 53-31-60-991-015-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303032000 | A380-800 REFERENCE STANDARD 7075 ALUMINUM; FIGURE:53-31-53-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303033000 | AIRBUS REFERENCE STANDARD A380-800 53-31-63-991-003-A. MATERIAL: 7175-T73 OR EQUIVALENT. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303035000 | AIRBUS REFERENCE STANDARD A380 53-31-27-991-021-A PAGE 23. MATERIAL: 7175 OR 7075 ALUMINUM. Includes Certificate of Conformance. | 1 | |
| 99L53303037000 | AIRBUS REFERENCE STANDARD A380 53-31-27-991-020-A PAGE 22. MATERIAL: TEFLON. Includes Certificate of Conformance. | 1 | |
| 99L53303100000 | Airbus Standard A380 53-30-51 | 1 | |
| 99L53509001000 | Airbus Standard 53-51-02 | 1 | |
| 99L53509002000 | Airbus Standard A380 | 1 | |
| 99L53509003000 | Airbus Standard A380 53-51-08 FG 53-51-08-991-004-A | 1 | |
| 99L53509006000 | Airbus Standard A380-800 53-51-37 FG 53-51-37-991-007-A | 1 | |
| 99L53509008000 | AIRBUS A380-800 REFERENCE STANDARD TITANIUM 6AL 4V; FIGURE:53-51-58-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L54503000000 | Airbus Standard A380 54-51-04 | 1 | |
| 99L54503003000 | Airbus Standard A380 54-51-05 | 1 | |
| 99L54503004000 | Airbus Standard A380 54-51-05 | 1 | |
| 99L54503005000 | AIRBUS REFERENCE STANDARD A380-800 54-51-03-991-004-A. MATERIAL: TA6V B Includes Test Report and Certificate of Conformance. | 1 | |
| 99L54503006000 | AIRBUS REFERENCE STANDARD A380-800 54-52-02-991-022-A, MATERIAL:TA6VB Includes Test Report and Certificate of Conformance. | 1 | |
| 99L55209001000 | AIRBUS REFERENCE STANDARD 55-21-03-991-003-1. 7050-T7451 ALUMINUM | 1 | |
| 99L57103002000 | A380-800 REFERENCE STANDARD FIGURE:53-11-03-991-008-A. Material: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57200001000 | STANDARD-CALIBRATION | 1 | |
| 99L57203000000 | Airbus Standard A380 57-21-10-991-003-A | 1 | |
| 99L57203001000 | Airbus Standard A380 57-21-10 | 1 | |
| 99L57203002000 | Airbus standard A380 57-21-05 | 1 | |
| 99L57203003000 | Airbus Standard A380 57-21-02-991-003-A | 1 | |
| 99L57203005000 | Airbus Standard A380 57-11-03 | 1 | |
| 99L57203006000 | Airbus Standard A380 57-11-03 | 1 | |
| 99L57203007000 | Airbus Standard A380 57-11-03 Probe Guide | 1 | |
| 99L57203008000 | Airbus Standard A380 57-11-03 Probe Guide | 1 | |
| 99L57204005000 | Airbus Standard A380 57-26-01 | 1 | |
| 99L57204008000 | REFERENCE STANDARD | 1 | |
| 99L57204062000 | REFERENCE STANDARD | 1 | |
| 99L57204068000 | AIRBUS STANDARD A380-800 FIGURE 53-21-17-991-019-A | 1 | |
| 99L57603000000 | AIRBUS REFERENCE STANDARD A330-200F 57-61-21-991-006-A PAGE 1. . lncludes Certificate of Conformance. | 1 | |
| 99N28207315000 | Airbus Standard, A320 PT6 28-28-03:PG617 FIG604 *Used with TEK-4085 | 4 | |
| 99N51107332000 | REFERENCE STANDARD NDT | 2 | |
| 99N51107332000-A | AIRBUS REFERENCE STANDARD A380-800 51-10-30-991-003-A FOR CLADDING MEASUREMENT. Includes Test Report and Certificate of Conformance. | 1 | |
| 99N51107332000-B | AIRBUS REFERENCE STANDARD A380-800 51-10-30-991-003-A FOR CLADDING MEASUREMENT. Includes Test Report and Certificate of Conformance. | 1 | |
| 99N51107332000-C | AIRBUS REFERENCE STANDARD A380-800 51-10-30-991-003-A FOR CLADDING MEASUREMENT. Includes Test Report and Certificate of Conformance. | 1 | |
| 99N51109009000 | CALIBRATION STANDARD | 2 | |
| 99N51109010000 | CALIBRATION REFERENCE STANDARD (CRS) | 2 | |
| 99PNF54503009000 | AIRBUS REFERENCE STANDARD A330 54-51-40-991-014-A FASTENER (NSA5415-36). lncludes Test Report and Certificate of Conformance. | 1 | |
| 99T045-1 | Reference Standard | 1 | |
| 99V52307336000 | AIRBUS REFERENCE STANDARD A380 52-31-01 FIGURE 5-52-31-01-005-A.MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99V53009001000 | REFERENCE STANDARD | 1 | |
| 9RS1 | Douglas Standard, DC9 SID:PG4 SHEET1 - MD80 SID Section 2-1:FIG8 PG1 SHEET1 | 1 | |
| 9RS10 | Douglas Standard, DC9 SID:PG35 SHEET1 | 1 | |
| 9RS11 | Douglas Standard, DC9 SID:PG36 SHEET1 - MD80 SID Section 2-1:FIG15 PG1 SHEET1 | 2 | |
| 9RS12 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 9RS13 | Douglas Standard, DC9 SID:PG42 SHEET1 - MD80 SID Section 2-1:FIG9 PG1 SHEET1 | 1 | |
| 9RS14 | Douglas Standard, DC9 SID:PG47 SHEET1 | 1 | |
| 9RS15 | DC9 Standard, DC9 SID:PG51 SHEET1 | 1 | |
| 9RS16 | DC9 Standard, DC9 SID:PG54 SHEET1 | 1 | |
| 9RS17 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 9RS18 | DC9 Standard, DC9 SID:PG57 SHEET1 | 1 | |
| 9RS19 | DC9 Standard, DC9 SID:PG58 SHEET1 | 1 | |
| 9RS2 | Douglas Standard, DC9 SID:PG8 SHEET1 | 1 | |
| 9RS20 | DC9 Standard, DC9 SID:PG63 SHEET1 | 1 | |
| 9RS21 | DC9 Standard, DC9 SID:PG66 SHEET1 | 1 | |
| 9RS22 | Ultrasonic Inspection Reference standard MD-80 | 1 | |
| 9RS23 | DC9 Standard, DC9 SID:PG75 SHEET1 | 1 | |
| 9RS24 | DC9 Standard, DC9 SID:PG79 SHEET1 | 1 | |
| 9RS25 | DC9 Standard, DC9 SID:PG83 SHEET1 | 1 | |
| 9RS26 | DC9 Standard, DC9 SID:PG87 SHEET1 | 1 | |
| 9RS27 | DC9 Standard, DC9 SID:PG91 SHEET1 | 1 | |
| 9RS28 | DC9 Standard, DC9 SID:PG95 SHEET1 | 1 | |
| 9RS29 | DC9 Standard, DC9 SID:PG99 SHEET1 | 1 | |
| 9RS3 | Douglas Standard, DC9 SID:PG9 SHEET1 | 1 | |
| 9RS30 | DC9 Standard, DC9 SID:PG102 SHEET1 | 1 | |
| 9RS31 | DC9 Standard, DC9 SID:PG106 SHEET1 | 1 | |
| 9RS32 | DC9 Standard, DC9 SID:PG110 SHEET1 | 1 | |
| 9RS33 | DC9 Standard, DC9 SID:PG114 SHEET1 | 1 | |
| 9RS34 | DC9 Standard, DC9 SID:PG118 SHEET1 | 1 | |
| 9RS35 | DC9 Standard, DC9 SID:PG124 SHEET1 | 1 | |
| 9RS4 | Douglas Standard, DC9 SID:PG13 SHEET1 | 1 | |
| 9RS5 | Douglas Standard, DC9 SID:PG17 | 2 | |
| 9RS6 | Douglas Standard, DC9 SID:PG21 SHEET1 | 1 | |
| 9RS7 | Douglas Standard, DC9 SID:PG25 SHEET1 | 1 | |
| 9RS8 | Douglas Standard, DC9 SID:PG30 SHEET1 | 1 | |
| 9RS9 | Douglas Standard, DC9 SID:PG34 SHEET1 | 1 | |
| 9RST1 | Calibration Standard, MD80 SID Section 2-1:FIG18 PG1 SHEET1 | 1 | |
| 9RST8 | 717-200 REFERENCE STANDARD FIGURE 1.10 SHEETS (1-6 ), PAGES 1-6. MATERIAL: 2024-T3 ALUMINUM and PHENOLIC(DMS1558). Includes Test Report and Certificate of Conformance. FASTENER (NAS1203 + NAS1252-10H + NAS679-A3, S432867-8 + NAS1080-8) | 1 | |
| 640-050-003 | CALIBRATION STANDARD | 1 | |
| A-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| A-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| A-2TM | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| A029 | Reference standard | 1 | |
| A085 | Boeing Standard, 707 PT6 53-30-07 FIG3: PG11 FIG3 SHEET6 | 1 | |
| A0M0020079001041 | REFERENCE STANDARD | 1 | |
| A10089 | 1/4" STEEL TIE (STANDARD) 14.3" PACK OF 100 | 2 | |
| A10L16-00-25Q | STANDARD PHASED ARRAY PROBE (NDT) | 1 | |
| A161 | Boeing Standard, 707 PT6 53-10-07 FIG2: PG6 SHEET3, BACR15CE6D6C Alodine Rivet only | 1 | |
| A181 | Boeing Standard, 707 PT6 55-10-07:FIG1 SHEET5 PG5 | 1 | |
| A20006-32 | STANDARD TOOL - INSTALLATION TOOL, GROMMET, NAS1368 | 13 | |
| A201 | Boeing Standard, 727 PT6 55-10-27:PG16 FIG3 | 1 | |
| A21010-70 | PUMP - VACUUM, PORTABLE, STANDARD DUTY | 7 | |
| A23-105 | INSULATED ENGINE COVER (standard design) | 1 | |
| A2482FG701 | 8TJ141 TRANSFER STANDARD FIXTURE | 1 | |
| A256 | Boeing Standard..727 PART6 53-10-27 PAGE 393..FIG 40 Sheet 5 | 1 | |
| A257 | Boeing Standard..727 PART6 53-10-27 PAGE 394..FIG 40 Sheet 6 | 3 | |
| A258 | Boeing Standard..727 PART6 53-10-27 PAGE 395..FIG 40 Sheet 7 | 1 | |
| A259 | Boeing Standard..727 PART6 53-10-27 PAGE 396..FIG 40 Sheet 8 | 5 | |
| A260 | Boeing Standard..727 PART6 53-10-27 PAGE 396..FIG 40 Sheet 8 | 1 | |
| A265ABC | Boeing Standard..727 PART6 52-30-27 PAGE 28, FIG 4 Sheet 6 | 1 | |
| A265DE | Boeing Standard..727 PART6 52-30-27 PAGE 29, FIG 4 Sheet 7 | 1 | |
| A266 | Boeing Reference Standard, 727 57-50-27:FIG1 | 1 | |
| A27073-1 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 5 | |
| A27288 | Eddy Current Inspection Reference standard SB DC9-27A235 R03 | 3 | |
| A305 | BOEING REFERENCE STANDARD PART 6 57-30-03 pg. 3 Fig 1 & 57-10-18. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| A306 | BOEING REFERENCE STANDARD 737 PART 6 57-10-07 FIGURE 1 PAGE 4. | 1 | |
| A32045-101 | SPANNER WRENCH - AN STANDARD TYPE | 9 | |
| A32045-125 | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| A32091-0781 | STANDARD TOOL HOLE SAW | 1 | |
| A330-92200-0001 | STANDARD TOOL BENCH - A | 1 | |
| A330-92210-0001 | STANDARD TOOL BENCH - B | 1 | |
| A341-000 | BUBBLE COVER, STANDARD CABIN | 1 | |
| A341-100 | PARTICLE SEPARATOR/EXHAUST COVER (STANDARD MODEL) | 1 | |
| A341-800 | TRAVEL COVER, Light Weight Travel Bubble Cover, STANDARD CABIN | 1 | |
| A35002-10 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 7 | |
| A35002-7 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 4 | |
| A352 | Boeing Standard, 737 PT6 53-10-04:PG4 FIG1 | 11 | |
| A376 | Boeing Standard, 737 PT6 53-10-45: PG15 FIG10 | 1 | |
| A386 | Boeing Standard, 737 PT6 53-10-45: PG16 FIG11 | 2 | |
| A389A | Boeing Standard, 737 PT6 53-10-41:PG13 FIG3 | 3 | |
| A389B | Boeing Standard, 737 PT6 53-10-41:PG13 FIG3 | 2 | |
| A389C | Boeing Standard, 737 PT6 53-10-41:PG13 FIG3 | 2 | |
| A4010 | Boeing Standard 53-10-33 PT6 PG7 | 1 | |
| A40199 | HAND BANDING TOOL - STANDARD CLAMPING BAND | 6 | |
| A40199 | BAND-IT A40199 TIE-DEX II TOOL FOR STANDARD SIZE BANDS | 6 | |
| A4024 | Boeing Standard 747 53-10-33 PT6 PG 8 | 1 | |
| A428 | Boeing Standard 747 53-10-15 PT6 PG9 | 1 | |
| A429 | Boeing Standard 747 53-10-15 PT 6 PG9 | 1 | |
| A430 | Boeing Standard 747 53-10-15 PT 6 PG9 | 2 | |
| A459 | Boeing Standard 747 30-10-13 PT6 PG3 | 1 | |
| A4619710001 | LIGHTING STANDARD | 3 | |
| A5069 | REFERENCE STANDARD 5 MHZ 70 DEGREE | 2 | |
| A607 | Boeing Reference Standard, 767 PT6 53-80-02: PG6 FIG2 Sheet1 | 4 | |
| A607A | Boeing Reference Standard, 767 PT6 53-80-02: PG7 FIG2 Sheet2 | 3 | |
| A71015-157/Standard parts-N | Standard parts kit assy | 1 | |
| A99-14CRG | DAVID CLARK (DC) CLAA99- 14CRG 4-BAY BATTERY CHARGER FOR 9900/9100 SYSTEM BATTERIES. THE 4- BAY BATTERY CHARGER (CLAA99- 14CRG) REQUIRES A STANDARD 110V CORD WITH A THREE-PRONG PLUG FOR CHARGING | 1 | |
| AA-62584 | Action Air Parts LED51N Standard Aviation Single Magneto Synchronizer | 1 | |
| AA1-400 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers) (standard tail), WINTER USE | 1 | |
| AA1-405 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers) (standard tail), ALL YEAR USE | 1 | |
| ABS324205-2 | Flat Standard with Radius Notch, Forged Aluminum, per ABS PT3 32-42-05 PG15:PROC1 FIG11 | 1 | |
| AC-PKG-SF-00 | AC-PKG-SF-00;MAP-Series OPM Standard Single Adaptors Kit | 1 | |
| AC500-900 | COCKPIT HEATSHIELDS, standard pilot's side (no door), w/ skylights (set of 6) | 1 | |
| AC500-903 | COCKPIT HEATSHIELDS, standard side window (no door), no skylights (set of 4) | 1 | |
| ACF-50 | ACF-50 HANDHELD SPRAY SYSTEM OR ACF-50 STANDARD PUMP SPRAY SYSTEM-50000 OR 50003 | 1 | |
| ACPK-HAWKER | Hawker Kit; nose/main standards and probes. *Customer to supply wheels. | 1 | |
| ACPK-MD11 | MD11 Kit; nose/main standards and probes. Customer to supply wheel. | 1 | |
| ACRS3-172942 | CALIBRATED CONDUCTIVVITY REFERENCE STANDARD SET OF 3. KIT CONSISTS OF MAGNESIUM, 6061-T6 AL AND 2024-T3 AL ( IACS Nominal values of 17%, 29% and 42% respectively) | 1 | |
| ACT12971 | STANDARD V/CORE SHAFT ASSMBY | 1 | |
| ACWM-737 | Wheel Standard, 737 MAIN | 1 | |
| ACWM-757 | Wheel Standard, 757 Main | 1 | |
| ACWM-A320 | Wheel Standard, A320 MAIN | 1 | |
| ACWM-ATR72 | Wheel Standard, ATR72 Main | 1 | |
| ACWM-E175-IB | Inner Wheel Standard, Embraer..175 90000582: 1. Contains a Total of 3 EDM Flaws in the Bead Seat Area of the Reference Standard. Flaw sizes: 1.52mm Long x 0.76mm Deep x 0.10mm Wide Tolerance= +/- 0.05mm. Includes Test Report and Certificate of Confor... | 1 | |
| ACWM-E175-OB | Outer Wheel Standard, Embraer..175 90000582-1. Contains a Total of 3 EDM Flaws in the Bead Seat Area of the Reference Standard. Flaw sizes: 1.52mm Long x 0.76mm Deep x 0.10mm Wide Tolerance= +/- 0.05mm. Includes Test Report and Certificate of Conform... | 1 | |
| ACWN-737 | Wheel Standard, 737 NOSE | 1 | |
| ACWN-A320 | Wheel Standard, A320 NOSE | 1 | |
| AD-1 | ADAPTS LARGE BORE VALVE DOWN TO STANDARD BORE. FITS IN 305-32 VALVE CORE THREADS. | 1 | |
| ADSE743 | PITOT/STATIC TESTER , WITH STANDARD ACCESSORIES | 3 | |
| ADT681-02-CP100-PSI-B | DIGITAL PRESSURE GAUGE STANDARD | 3 | |
| ADT681-02-CP30-PSI-B | DIGITAL PRESSURE GAUGE STANDARD | 3 | |
| AE-OPT-0060 | Non-Standard Paint -Tug Only (Non Metallic) | 1 | |
| AE0PT0060 | NON STANDARD PAINT, TUG ONLY NON METALL, | 1 | |
| AES-.187SS/1.5WL | STAINLESS STEEL STANDARD ELOTEST ROTARY PROBE, 3/16"Ø,100KHZ-2MHZ 1.5" (38.1mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AES-6.3MSE | STANDARD ELOTEST ROTARY PROBE SPLIT END 6.3MM 100KHZ-2MHZ.. 2.0" WORKING LENGTH | 1 | |
| AES-RA | ADAPTER STANDARD ELOTEST ROTARY TO RECHII RA PROBE END | 1 | |
| AESY-.125-.156 | STANDARD ELOTEST ROTARY PROBE ..100KHZ-2MHZ 1.3" WORKING LENGTH | 1 | |
| AESY-.156-.187 | STANDARD ELOTEST ROTARY PROBE..100KHZ-2MHZ 1.3" WORKING LENGTH | 1 | |
| AF- 4120 | LOW FREQUENCY RING PROBE, 10KHZ-100KHZ, REFLECTION, .405"ID, .800"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. USED WITH REFERENCE STANDARD: NDT1102-100 TI | 1 | |
| AF-4041 | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .50" inches and diameter of .300" to .320" inches. Flat at the end. Used with ANDT3016-B reference standard. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4041/4F | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .50" inches and diameter of .300" to .320" inches, 4 Pin Fischer Connector. Flat at the end. Used with ANDT3016-B reference standard. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4084 | LOW FREQUENCY REFLECTION RING PROBE, 800HZ-10KHZ, .320"Ø ID,.600"Ø OD x .700"H, WITH TRIAX FISCHER CONNECTOR. REFERENCE: 767 PART 6 53-10-22, NDT6075 REFERENCE STANDARD. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4092 | LOW FREQUENCT RING PROBE, 500Hz-3KHz. REFLECTION, 1.00" OD, .510" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4101 | LOW FREQUENCT RING PROBE, 1-10KHz. REFLECTION, .700" OD, .350" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4102 | LOW FREQUENCT RING PROBE, 50Hz-5KHz. REFLECTION, .700" OD, .350" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4105/TF | Surface Probe, Standard Bridge Detachable Surface Probe with a diameter of .31 in. (7.9 mm) and a operating range of 1 kHz - 50 kHz (equivalent to SPO-1284, SPO-1596), Triax Fischer/ LEMO Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4109/TI | LOW FREQUENCY REFLECTION RING PROBE, ID .470, OD.900, 3-10KHZ. For reference standard NDT 3259. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4120 | LOW FREQUENCY RING PROBE, 10KHz-100KHz, REFLECTION, .405"ID, .800"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. USED WITH REFERENCE STANDARD: NDT1102-100 Ti | 1 | |
| AF-4124/300H | REFLECTION RING PROBE TRIAX FISHER CONNECTOR, 1.25"OD .75" ID(19.6mm) 300HZ-1KHZ. 737 PART 6 57-10-53, pg.2, USED WITH REFERENCE STANDARD NDT3168 AND NDT3176-X. Includes test report and Certificate of Conformance. | 1 | |
| AF-4125/100H | CUSTOM REFLECTION RING PROBE 1.2" OD, .605" ID, 50Hz-3KHz TRIAX FISHER CONNECTOR. 737 PART 6 57-10-58, pg.2. and 737 PART 6 57-10-54, pg.2 USED WITH NDT3153-X AND 3167-X SERIES REFERENCE STANDARDS. Includes Test Report and Certificate of Conform... | 1 | |
| AF-4144 | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .50" inches and diameter of .300" to .320" inches. 10 inches long Flat at the end. Used with ANDT3016-B reference standard. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4153/TI | LOW FREQUENCY RING PROBE 1-15KHz, REFLECTION, ID.565" OD.910",SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT 3225. | 1 | |
| AF-4202 | LOW FREQUENCY REFLECTION RING PROBE, 500HZ-5KHZ, ID 0.325", OD 0.790" (MAX). 1.05" HEIGHT. TRIAX FISCHER CONNECTOR. USED WITH NDT6097 REFERENCE STANDARD Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5098RS/.875 | BOEING DC9 REFERENCE STANDARD -57-225 FIG 6 | 1 | |
| AF-5272 | CUSTOM COUNTERBORE ROTARY ADJUSTABLE X STYLE PROBE WITH THE COIL LOCATED AT THE EDGE OF THE PROBE TIP, .936'-1.0" 2.0"WL, SUPPLIED WITH A 4 PIN FICHER CONNECTOR, 100 KHz-2MHz Includes Test Report and Certificate of Conformance REFERENCE STANDARD - NDT3117 | 1 | |
| AF-5278/TF | HIGH FREQUENCY SURFACE PROBE, Twin Coil Differential 50-500KHZ. 4.0" Long 0.375" Diameter with Triax Fischer connector. For use with Boeing Reference Standard 497 767 Part 6 53-00-04. IncludesTest Report and Certificate of conformance. | 1 | |
| AF-6006 | SLIDING PROBE, REFLECTION, 1-40KHZ TRIAX FISHER CONNECTOR. REFERENCE STANDARD USED ( NDT1099) 757 PT. 6, 53-30-14. Includes Certification Report and COC. | 1 | |
| AF-NEC-6112-1/Ti | Custom multi-hole reference standard Material: 6AL-4v Titanium. Hole sizes: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8",11/16" and 3/4". Countersink holes opposite side. Thru hole EDM notches in each hole .005" +/-.001". 3 Surface... | 1 | |
| AF114 | LANCE STANDARD | 1 | |
| AF115 | LANCE STANDARD | 1 | |
| AF125-4801-DEV | Custom Boeing Reference Standard. Material: ST Aeromet 100. Quantity of 1 (A) .030" x .030" and 1 (B) .050" x .050" corner EDM notch. Reference standard must be fabricated using round bar since Aeromet 100 is only commercially available in this form.... | 1 | |
| AF8 | M22520/1-01 Standard Adjustable Indent Crimp Tool | 14 | |
| AF8-CC | Standard Adjustable Indent Crimp Tool with CYCLE COUNTER | 2 | |
| AFC-210HS | Contact Transducer, 2.25 MHz, 1.0 in. Element Diameter, Standard Case Style, Side Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-275HS | Contact Transducer, 2.25 MHz, 0.75 in. Element Diameter, Standard Case Style, Side Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-275SB | Contact Transducer, 2.25 MHz, 0.75 in. Element Diameter, Standard Case Style, Right BNC ConnectoR. ACCUSCAN TYPE | 1 | |
| AFC-470-1 | Airwolf AFC-470-1 Standard 3.00 to 3.75 Diameter Oil Filter Can Cutter | 2 | |
| AFHS20-2A-5 | Aluminum Multi-hole reference standard with certificate. Contains 20 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 1.0" inch. Each hole contains two EDM corner... | 1 | |
| AFK-1014 | Custom Ultrasonic Kit, PART 4 53-10-13 for the WING REAR SPAR - STA 663.75 REAR SPAR BULKHEAD SIDE FRAME FITTING FAIL SAFE STRAP. Kit includes 1 of each AFM-560AT & AFS-0541 Transducers, 1 NDT3312 Reference Standard and 1 ABNC-MD6. Supplied with a waterpr | 1 | |
| AFK-1031UT | NDT STANDARDS AND TRANSDUCERS KIT | 1 | |
| AFK-AUR9 | Scanner Probe kit, ""SUB"" scanner series:9 probes with standard working lengths. Probes "SUB-8-10, SUB-10-12, SUB-12-14, SUB-14-16, SUB-16-18, SUB-18-20, SUB-20-24, SUB-24-28, SUB-28-32. Includes shipping/ transport kit capable of storing scanner cable a | 1 | |
| AFK-EC-BH16 | Boeing Part 6 51-00-00 Proceedure 16 Eddy Current Bolt Hole Inspection Kit. Includes 15 Universal Rotating Split End scanner probes Supplied with a with a Universal 4 Pin Fischer Connector and 1 Calibration Standard with hole sizes ranging from .187"Ø to | 1 | |
| AFK-SS | PH TOOL REFERENCE STANDARD STAINLESS SPEC USAF TO 33-B-1-1 | 1 | |
| AFM-560AT | REFERENCE STANDARD | 1 | |
| AFNDT-0512A | Eddy Current Hole and Surface Crack Standard: 7075-T651 Aluminum.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-0512A. | Eddy Current Surface Crack Standard. EDM Notch Size: Total of 3 Notches, 0.005, 0.010, 0.020 Deep x .005W +/- .002 per 33B-1-2 WP 402 00. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-0512T | Eddy Current Hole and Surface Crack Standard: 6AL-4v Titanium.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1000/4340 | 12 HOLE REFERENCE STANDARD 4340 STEEL WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1000/SA | 12 HOLE REFERENCE STANDARD ALUMINUM WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1000SA-1 | 12 HOLE REFERENCE STANDARD ALUMINUM WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1000SS | 12 HOLE REFERENCE STANDARD STAINLESS STEEL WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1000TI | 12 HOLE REFERENCE STANDARD 6AL4V WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1002 | CUSTOM 3 HOLE 7075-T6 ALUM. EC REFERENCE STANDARD WITH a .020x.020" CORNER NOTCH IN EACH HOLE. HOLE SIZES 1.063", .687", .625" DIA. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1005 | 14 HOLE ROTARY STANDARD 6AL4V 5/32, 7/32, 11/32, 3/16, 5/16, 13/64, 15/64, 17/64, 19/64, 21/64, 1/4, 3/8, 1/2, 28 EDM NOTCHES .050 TOP, .030 CORNER BOTTEM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1012 | Bombardier / Challenger 300 Custom UT Thickness Reference Standard Figure 2 Part 1 Section 4 page 11. Material: 2024-T351 Clad. Standard machine milling, no Chemical mill. Step Tolerance: +/-.002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-INC625 | CALIBRATION STANDARD INCOLNEL BLOCK 625 5X1 OAL .10,.20,.30,.40,.50. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1017AL | Custom Eddy Current Hole Standard 7075-T7 Aluminum ( Equivalent substitute for 7010 Aluminum). Hole Sizes 1.77" and 0.58" diameter. EDM flaw size: 0.5mm(.020") x 0.1mm (0.004") +/- .002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1025AL | Multi-Hole reference standard. Material: 7075-T6 Aluminum. 12 Holes 3/16", 7/32", 1/4" ,9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4" .020" x .020" x .005" Wide ± .002" Through EDM Notches in each hole. Standard also includes 3 surface EDM n | 1 | |
| AFNDT-1025TI | Multi-Hole reference standard. Material: 6Al-4v Titanium. 12 Holes 3/16", 7/32", 1/4" ,9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4" .020" x .020" x .005" Wide ± .002" Through EDM Notches in each hole. Standard also includes 3 surface EDM no | 1 | |
| AFNDT-1030 | CUSTOM BRILE RIVET/ 100 DEGREE COUNTERSINK MULTI HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. BRILE HOLE SIZES: 5/32", 3/16" and 1/4". 100 DEGREE COUNTERSINK HOLE SIZES: 5/32", 3/16", 1/4", 5/16", 3/8". .030"X.030" CORNER / COUNTERSINK EDM NOTCHES. DIM... | 1 | |
| AFNDT-1035/7075 | 5 hole reference standard sizes; 1/4", 5/16", 3/8", 7/16" and1/2" inch diameters.( .030" X .030" x .005" +/-.001" corner EDM notch. 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1035TI | REFERENCE STANDARD 7/16" THICK 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1040 | THREE HOLE CALIBRATION STANDARD. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1074/TI | REFERENCE STANDARD TITANIUM | 1 | |
| AFNDT-1080-2/840 | CUSTOM REFERENCE STANDARD PER SPECS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1080/4340 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES 0.5mm, 1.0mm, 2.0mm, 3.00mm, 4.0mm, 5.0mm (.004"W +/- .002, MAX.006), 4340 STEEL 1.0"W x 7.0"L. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1085 | CUSTOM MULTI-HOLE REFERECNE STANDARD, 2024-T3 WITH .030X.030 CORNER NOTCH, .020X.020 CORNER NOTCH, HOLE SIZE 5/32,11/64,3/16,13/64,9/32,17/64,1/4,7/32. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1098AL | 12 HOLE REFERENCE STANDARD 2024-T3 .156, .187, .199 ,.218, .250, .281, .312, .343, .375, .406, .437, .500, .030X.030 CORNER NOTCH, .050X.050 CORNER NOTCH ( 24 EDM NOTCHES TOTAL). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1098St | 12 HOLE REFERENCE STANDARD 4340 STEEL. HOLE SIZES: .156, .187, .199 ,.218, .250, .281, .312, .343, .375, .406, .437, .500, .030X.030 CORNER NOTCH, .050X.050 CORNER NOTCH (24 EDM NOTCHES TOTAL). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1098TI | 12 HOLE REFERENCE STANDARD 6AL4V .156, .187, .199 ,.218, .250, .281, .312, .343, .375, .406, .437, .500, .030X.030 CORNER NOTCH, .050X.050 CORNER NOTCH (24 EDM NOTCHES TOTAL). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-186A-F | CUSTOM STANDARD COMBINING 186A-F INTO ONE STANDARD. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2002AL | CALIBRATION STANDARD THREE HOLES, 1.0,1.25,1.5, CORNER NOTCH .030X.030. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2003-1A-2 | 12 HOLE STANDARD - HOLE SIZES; 3/16 INCH (4.74MM) 7/32 INCH (5.53MM) 1/4 INCH (6.35MM) 9/32 INCH (7.13MM) 5/16 INCH (7.92MM) 11/32 INCH (8.71MM) 3/8 INCH (9.52MM) 7/16 INCH (11.09MM) 1/2 INCH (12.7MM) 9/16 INCH (14.27MM) 5/8 INCH (15.87MM) 3/4 INCH (19.05 | 1 | |
| AFNDT-2003-1AL | "EC REFERENCE STANDARD U8860405 | 1 | |
| AFNDT-2003-2S | 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: .187", .250" ,.312", .375", .437", .500", .562", .625", .687", .750", AND 1.0" ( .030X.030 CORNER NOTCH and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) 304 STAINLESS STEEL. Includes Test Repo | 1 | |
| AFNDT-2004 | EDDY CURRENT SURFACE STANDARD WITH 3 EDM NOTCHES: ( .005", .010", .020" Deep x .004"Wide +/- .002 ), MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2005A | 12 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .030" x .030" CORNER NOTCH. .008", .020", .040" SURFACE NOTCHES. .005" +/-.001". Includes Test Report and Certificate o | 1 | |
| AFNDT-2005TI | 12 HOLE REFERENCE STANDARD 6AL-4v TITANIUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .030" x .030" CORNER NOTCH. .008", .020", .040" SURFACE NOTCHES. .005" +/-.001". Includes Test Report and Certificate of | 1 | |
| AFNDT-2006/13-8 | 12 HOLE REFERENCE STANDARD 13-8 PH STAINLESS STEEL (3/16, 7/32 ,1/4, 9/32, 5/16,11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4), .030X.030. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2006/17-4 | 12 HOLE REFERENCE STANDARD 17-4PH (3/16, 7/32 ,1/4, 9/32, 5/16,11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4), .030X.030. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2006/300M | 12 HOLE REFERENCE STANDARD 300M STEEL.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.005"WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", .020", .040" DEEP .005" ... | 1 | |
| AFNDT-2006A | 12 HOLE REFERENCE STANDARD 7075-T6 aluminum. Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.004" ±.002" WIDE CORNER EDM NOTCH in EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", .020",... | 1 | |
| AFNDT-2006S | 12 HOLE REFERENCE STANDARD 4130 or 4340 STEEL.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.005"WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", .020", .040" DEE... | 1 | |
| AFNDT-2006SS | 12 HOLE REFERENCE STANDARD 304 304 STAINLESS STEEL.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.005"WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", .020", .040... | 1 | |
| AFNDT-2006SS-1 | REFERENCE STANDARD | 1 | |
| AFNDT-2006TI | 12 HOLE REFERENCE STANDARD 6AL-4V.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.005"WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", .020", .040" DEEP .005" WIDE... | 1 | |
| AFNDT-2008/2024-T6 | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PROCEEDURE 1, FIGURE 11, PAGE 15 ALUMINUM 2024-T6 .. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2008/C | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PAGES 1-7 FIGURE 2 and 3 CAST ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2008/F | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PROCEEDURE 1, FIGURE 11, PAGE 15 ALUMINUM 2014-T6 CONDUCTIVITY RANGE 35-40 IACS.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2008/MAG | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PAGES 1-7 FIGURE 2 and 3. MATERIAL: MAGNESIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2008/SS | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PAGES 1-7 FIGURE 2 and 3 & 32-42-05 FIGURE 11 PROCEDURE 1 PAGE 15. MATERIAL: 304 STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2010AL | Custom McDonnell Douglas 15 bolt hole reference standard with a .060"L x .030Dx .005" max width mid-wall notch, and .030"x.030"x.005" max width corner notch in each hole. Hole sizes (.156", .172", .188", .203", .250", .266", .281", .297", .313", .328"... | 1 | |
| AFNDT-2013AL | 12 HOLE REFERENCE STANDARD 7075-T6 (3/16" x 2), 13/64", 7/32", 15/64" ,(1/4" x 2 ), 17/64",9/32", 19/64",5/16", 21/64" .020"x.020" and .030"x.030" x .005"W +/-.002" CORNER EDM NOTCH PER BOEING SPECIFICATION 747 PART 6 51-00-00 PAGE 8 FIGURE 3. Includes Te | 1 | |
| AFNDT-2014 | CUSTOM EC STANDARD, NOTCH .060X.030X.005 TOL PER BSS7048, 304SS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2014Ti | 12 HOLE REFERENCE STANDARD IN 6AL-4v Ti; HOLE SIZES: (3/16, 7/32 ,1/4, 9/32, 5/16,11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4), .010", .020", .030", and .040" SURFACE NOTCHES. .050"x.050" CORNER EDM NOTCH and .030"x.030" CORNEREDM NOTCH, .050"Lx.030"D MID-... | 1 | |
| AFNDT-2015 | CUSTOM SURFACE WAVE STANDARD, 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2017-INC718 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 718 INCONEL. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certific | 1 | |
| AFNDT-2030/13-8 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 13-8PH STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/13-8PH | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 13-8PH MO STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/15-5PH | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 15-5PH STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/17-4 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 17-4PH STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/17-7PH | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 17-7PH STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/2014-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2014-T6 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/2014-T651 | DDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2014-T651 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/2024 | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2024-T3 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/2024-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2024-T6 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/300M | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), MATERIAL: 300M STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/301 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002, MAX.006), CRES 301 1/2 HARD(MIL-S-5059) 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/304 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 304 STAINLESS STEEL 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/304L | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 304L STAINLESS STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/316SS | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 316 STAINLESS STEEL 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/4130 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 4130 STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/4340 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 4340 STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/6061-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008"(0.2mm), .020"(0.5mm), .040"(1.0mm) (.004"W +/- .002), 6061-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance and Material Certification. | 1 | |
| AFNDT-2030/7075-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/7075-T7 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 7075-T7 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/718 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 718 INCONNEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/I600 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 600 SERIES INCONNEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/MAG | Surface reference standard, Magnesium, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX | 1 | |
| AFNDT-2030/MAR | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008"(0.2mm), .020"(0.5mm), .040"(1.0mm) (.004"W +/- .002). MATERIAL: 250 MARAGING STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/TI | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002, MAX .006"), 6AL-4v TITANIUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and COC | 1 | |
| AFNDT-2030CS | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002, MAX.006), 4130 or 4340 STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2035 | 6 Hole reference standard (Aluminum 7075-T6 with certifications). Hole Sizes: 1.0", 1.125", 1.250" ,1.500", 1.625", 1.750", ( .030 x .030 x .006 +/- .001) Corner EDM Notches and .010, .020, .040 Surface notches).. Includes Test Report and Certificate | 1 | |
| AFNDT-2042/AL | CUSTOM 5 HOLE REFERENCE STANDARD MADE OF 7075-T6 ALUMINUM WITH (0.5mm X 0.5mm +/- .05mm) CORNER EDM FLAWS. HOLE SIZE : 13/64", 19/64", 23/64", 7/16" & 31/64". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2043/718 | AIR FORCE GENERAL PURPOSE REFERENCE STANDARD INCONEL 718 ,20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES. Manufactured per IAW U.S.A.F. Tech Order 33B-1-1 AIR FORCE P/N:(7947479-10). 6635-01-512-4953 | 1 | |
| AFNDT-2043/A | AIR FORCE GENERAL PURPOSE REFERENCE STANDARD 7075-T6,20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES. AIR FORCE P/N:(7947479-10) NSN: 6635-01-092-5129. Includes Certification Report Traceable to NIST and Certificate of conformance. | 1 | |
| AFNDT-2043/S | AIR FORCE GENERAL PURPOSE REFERENCE STANDARD 4340 STEEL ,20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES. AIR FORCE P/N:(7947479-10)..6635-01-512-4952 | 1 | |
| AFNDT-2043/SS | AIR FORCE GENERAL PURPOSE REFERENCE STANDARD 304 STAINLESS STEEL ,20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES. AIR FORCE P/N:(7947479-10)...6635-01-548-6659 | 1 | |
| AFNDT-2043/TI | AIR FORCE GENERAL PURPOSE REFERENCE STANDARD 6AL-4V TITANIUM ,20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES. Manufactured per IAW U.S.A.F. Tech Order 33B-1-1 AIR FORCE P/N:(7947479-10). 6635-01-390-1768 | 1 | |
| AFNDT-2044/15-5 | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also... | 1 | |
| AFNDT-2044/304 | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also... | 1 | |
| AFNDT-2044/718 | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| AFNDT-2044/Ti | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also... | 1 | |
| AFNDT-2044AL | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also... | 1 | |
| AFNDT-2044S | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also... | 1 | |
| AFNDT-2046/AL | 15 HOLE REFERENCE STANDARD 7075-T6 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 15 EDM NOTCHES .030X.030 CORNER TOP. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2046/TI | 15 HOLE REFERENCE STANDARD 6AL4V 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 15 EDM NOTCHES .030X.030 CORNER. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2048/AST | CUSTOM NAVY BLOCK SET, 3 Blocks Total. Materials: 7075-T6 Aluminum, 4340 Cres Steel and 6AL-4V Titanium. Each Standard Includes 20 Fastener Holes (.156-.750) Containing a total of 71 EDM Notches. Includes Custom fit Waterproof Case. Includes Test Rep... | 1 | |
| AFNDT-2049/4130 | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 4130, 0.030"X0.030", CORNER EDM NOTCH ON THE TOP SURFACE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2049/4340 | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 4340, 0.030"X0.030", CORNER EDM NOTCH ON THE TOP SURFACE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2049/7075-T6 | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 7075-T6, 0.030"X0.030", CORNER EDM NOTCH ON THE TOP SURFACE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2052 | LOW FREQUENCY STANDARD, 2024-T3, 4.0X.4.0X.125 & .190. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2053 | 10 HOLE REFERENCE STANDARD 2024-T3, HOLE SIZES, 1/8, 3/16 ,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, .030" x .030" CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .750"L x .010,.020,.040 DEEP. Includes Test Report and Certificate of Conformance.+ | 1 | |
| AFNDT-2053CS | 10 HOLE REFERENCE STANDARD 4130 STEEL, HOLE SIZES, 1/8, 3/16 ,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, .030" x .030" CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .750"L x .010,.020,.040 DEEP. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2053TI | 10 HOLE REFERENCE STANDARD 6AL-4V, HOLE SIZES, 1/8, 3/16 ,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, .030" x .030" CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .750"L x .010,.020,.040 DEEP. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2054AL | CUSTOM ALUMINUM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1016-NDT1021, 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. WITH HOLE DIAMETERS: .156",.250",.312",.375",.437",.500". CORNER E... | 1 | |
| AFNDT-2054AL-1 | CUSTOM ALUMINUM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1016-NDT1021, 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. WITH HOLE DIAMETERS: .156",.250",.312",.375",.437",.500". CORNER E... | 1 | |
| AFNDT-2054AL-2 | CUSTOM ALUMINUM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1016-NDT1021, 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. WITH HOLE DIAMETERS: .125" .156", .187", .250",.375",.500". CORNER... | 1 | |
| AFNDT-2054CS-1 | CUSTOM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1040-NDT1045, 707, 727, 737, 747 PT 6 51-00-00 FIG 19, 757, 767 PT 6 51-00-17, 777 PT 6 51-00-05 PROCEDURE 2, 787 PT 6 51-00-04 PROCEDURE 1. DIAMETERS: .156",.250",.312",.375",.437",.500". CORN... | 1 | |
| AFNDT-2054CS-2 | CUSTOM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1040-NDT1045, 707, 727, 737, 747 PT 6 51-00-00 FIG 19, 757, 767 PT 6 51-00-17, 777 PT 6 51-00-05 PROCEDURE 2, 787 PT 6 51-00-04 PROCEDURE 1. DIAMETERS: .125", .156", .187" ,.250",.375", .500". ... | 1 | |
| AFNDT-2055 | CUSTOM ROTARY BLOCK REFERENCE STANDARD. 10MM, 13MM, 15MM, 17MM , 19MM, .020X.020X.004 +/-.001, ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2059/304SS | CUSTOM 8 STEP STANDARD, .080,.071,.063,.056,.050,.040,.030,.020, 304SS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2059/6AL4V | CUSTOM 8 STEP STANDARD, .080,.071,.063,.056,.050,.040,.030,.020, 6AL4V. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2059/7075-T6 | CUSTOM 8 STEP STANDARD, .080,.071,.063,.056,.050,.040,.030,.020, 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2060 | CUSTOM REFERENCE STANDARD 7075-T6, NOTCH .010 +/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2063 | 10 HOLE REFERENCE STANDARD 6AL-4V TITANIUM, HOLE SIZES: 1/8, 3/16 , 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, .030X.030 CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .75L X.010,.020,.040 DEEP. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2063AL | 11/16" HOLE STANDARD IN 7075-T6 with .030" x .030" CORNER EDM NOTCH. MATERIAL SIZE 2.0" x 2.0" x .375". Includes Test Report and Certificate of Conformance.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2063S | 10 HOLE REFERENCE STANDARD 4340 STEEL, HOLE SIZES: 1/8, 3/16 , 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, .030X.030 CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .75L X.010,.020,.040 DEEP. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2064/AL | SAFRAN MESSIER-BUGATTI-DOWTY ET SURFACE REFERENCE STANDARD 32-09-01 FIGURE 67,GRAPHIC-32-09-01-041-008-A01. MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of conformance. | 1 | |
| AFNDT-2064/MAG | SAFRAN MESSIER-BUGATTI-DOWTY REFERENCE STANDARD 32-09-01 MAGNESIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2064/TI | SAFRAN MESSIER-BUGATTI-DOWTY REFERENCE STANDARD 32-09-01 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2065 | Olympus Aluminum multi-hole reference standard. Contains 5 hole sizes; 7/16, 1/2, 9/16, 3/4 and 1.0" inch hole diameters.( .030" x.030" corner EDM notch in each hole). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2066/TI | 12 HOLE REFERENCE STANDARD 6AL-4V TITANIUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .005" +/- .001" WIDE THRU NOTCH. .008", .020", .040" SURFACE NOTCHES. .005" +/-.001". Includes Test Report and C | 1 | |
| AFNDT-2066A | 12 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .005" +/- .001" WIDE THRU NOTCH. .008", .020", .040" SURFACE NOTCHES. .005" +/-.001". Includes Test Report and | 1 | |
| AFNDT-2069/Ti | Custom Bolt Hole Standard 6Al-4v Titanium. Contains 12 hole sizes; 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, and 7/8 inch diameters.( .050" x .050" +/- .005" x .005"W +0.000" / -0.002" Corner EDM Notch. Per Boeing Specification 77... | 1 | |
| AFNDT-2069AL | 13 HOLE REFERENCE STANDARD 7075-T6 aluminum. Hole Sizes: 3/16(.1875), 13/64(.203), 7/32(.218), 15/64(.234),1/4(.250), 17/64(.265), 9/32(.281), 19/64(.297), 5/16(.312),21/64(.328),11/32(.343), 23/64(.359), 3/8(.375). EDM NOTCH: .030" X. 030" x.005" ±.... | 1 | |
| AFNDT-2069TI | 13 HOLE REFERENCE STANDARD 6AL-4V Titanium. Hole Sizes: 3/16(.1875), 13/64(.203), 7/32(.218), 15/64(.234),1/4(.250), 17/64(.265), 9/32(.281), 19/64(.297), 5/16(.312),21/64(.328),11/32(.343), 23/64(.359), 3/8(.375). EDM NOTCH: .030" X. 030" x.005" ±.00... | 1 | |
| AFNDT-2070-AL | MD STACKABLE REFERENCE STANDARD, 06-20-01, .040, .050, .060, .063, .068, .071, .090, .100, .190, AL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2071 | BOEING REFERENCE STANDARD 767 PT 4 51-00-04. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2073AL | 12 HOLE REFERENCE STANDARD 7075-T6 aluminum. Hole Sizes: 25/64(.390), 13/32(.406), 27/64(.421),7/16(.437), 29/64(..453), 15/32(..468), 31/64(.484),1/2(.500), 33/64(.515),17/32(.531), 35/64(.546), 9/16(.562). EDM NOTCH: .030" X. 030" x.005" ±.001" WIDE... | 1 | |
| AFNDT-2073TI | 12 HOLE REFERENCE STANDARD 6AL-4V Titanium. Hole Sizes: 25/64(.390), 13/32(.406), 27/64(.421),7/16(.437), 29/64(..453), 15/32(..468), 31/64(.484),1/2(.500), 33/64(.515),17/32(.531), 35/64(.546), 9/16(.562). EDM NOTCH: .030" X. 030" x.005" ±.001" WIDE ... | 1 | |
| AFNDT-2074 | CUSTOM SURFACEREFERENCE STANDARD, 3 EDM SLOTS .008",.020",.040" .007" MAX WIDTH. MATERIAL: 7075-T6 ALUMINUM. SIZE: 4.0 x 1.5 x .25". Includes Test Report and Certifictate of Conformance. | 1 | |
| AFNDT-2075/TI | REFERENCE STANDARD TO NDT | 1 | |
| AFNDT-2076AL | 10 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. Hole Sizes: 1/8", 5/32", 3/16", 7/32" ,1/4", 9/32", 5/16", 3/8", 7/16", 1/2", .030" X. 030" x.005" +/- .001" WIDE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2076TI | 10 HOLE REFERENCE STANDARD 6AL-4v TITANIUM. Hole Sizes: 1/8", 5/32", 3/16", 7/32" ,1/4", 9/32", 5/16", 3/8", 7/16", 1/2", .030" X. 030" x.005" +/- .001" WIDE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2083 | 10 HOLE REFERENCE STANDARD 2024-T3, HOLE SIZES, 1/8,5/32, 3/16 , 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, .030X.030 CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .75L X.010,.020,.040 DEEP. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2094/6.2 | EMBRAER REFERENCE STANDARD 57-28-00 PT 2, HOLE SIZE 6.2. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2094/7.8 | EMBRAER REFERENCE STANDARD 57-28-00 PT 2, HOLE SIZE 7.8. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2094/8.2 | EMBRAER REFERENCE STANDARD 57-28-00 PT 2, HOLE SIZE 8.2. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2099/S | 5 STEP STANDARD .050, .100, .200, .300, .400, 1018 STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-21-6-9 | CUSTOM REFERENCES STANDARD PER AMSS5561. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2100/AL | 6 STEP STANDARD, .500, .600, .700, .800, .900, 1.00, ALUMINUM 2024-T351. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2100/S | 6 STEP STANDARD, .500, .600, .700, .800, .900, 1.00, 1018 STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2100AL | 6 STEP STANDARD, 1MM, 2MM, 4MM, 6MM, 8MM, 10MM, ALUMINUM 2024-T351. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2101/AL | 5 STEP STANDARD, 1.00, 1.50, 2.00, 2.50, 3.0, ALLUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2101/S | 5 STEP STANDARD, 1.00, 1.50, 2.00, 2.50, 3.0, STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2106 | 3 HOLE REFERENCE STANDARD 2024-T3 ALUMINUM.. HOLE SIZES: 5/32", 3/16", 1/4" TOTAL OF 3 EDM CORNER NOTCHES .030" x .030".N Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2107/4340 | EDDY CURRENT SURFACE REFERENCE STANDARD. EDM FLAWS: .008", .020", .040" (.005" Maximum Width). MATERIAL: 4340 STEEL. SIZE: 1.0"W x 4.0"L x .25"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2107/6AL4V | EDDY CURRENT SURFACE REFERENCE STANDARD. EDM FLAWS: .008", .020", .040" (.005" Maximum Width). MATERIAL: 6AL-4V TITANIUM. SIZE: 1.0"W x 4.0"L x .25"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2107/7075T6 | EDDY CURRENT SURFACE REFERENCE STANDARD. EDM FLAWS: .008", .020", .040" (.005" Maximum Width). MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2109 | 15 Hole aluminum reference standard, material 7075-T6, hole sizes: 1/8, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64. With .030 x .030 and .020 x .020 Corner EDM Notches. Includes Test Report and Certificat | 1 | |
| AFNDT-2111 | CUSTOM CALIBRATION TEST STANDARD. PER CUSTOMER SPECS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2114AL | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.006W +/- .001). BLOCK SIZE:3.156 "L x 1.375"W x .312"H. MATERIAL: 2024-T3 ALUMINUM.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2116 | CUSTOM EC REFERENCE STANDARD BRT189-080 REV A, STEEL 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2117AL | 6 STEP THICKNESS STANDARD. STEP SIZES: .050", .100", .200", .300", .400, .500" +/-.001". PAD SIZE 1.0" x 1.0". MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2122/C/1.5/.050 | BEECHCRAFT STANDARD CURVED, 1.5Ø, .050. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2122/C/1.5/.100 | BEECHCRAFT STANDARD CURVED, 1.5Ø, .100. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2122/C/2.5/.050 | BEECHCRAFT STANDARD CURVED, 2.5Ø, .050. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2122/C/2.5/.100 | BEECHCRAFT STANDARD CURVED, 2.5Ø, .100. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2122/F.050 | BEECHCRAFT STANDARD FLAT .050. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2122/F.100 | BEECHCRAFT STANDARD FLAT .100. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2123AL | 12 HOLE REFERENCE STANDARD 7075-T6, 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", .005" +/-.001" THROUGH NOTCH ON EACH HOLE and A .030" x .030" x .005+/- .001" CORNER NOTCH IN EACH HOLE. SURFACE NOTCHES: .008", .020"... | 1 | |
| AFNDT-2123S | 12 HOLE REFERENCE STANDARD 4340 STEEL, 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", .005" +/-.001" THROUGH NOTCH ON EACH HOLE and A .030" x .030" x .005+/- .001" CORNER NOTCH IN EACH HOLE. SURFACE NOTCHES: .008", .0... | 1 | |
| AFNDT-2123TI | 12 HOLE REFERENCE STANDARD 6AL-4v TITANIUM, 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", .005" +/-.001" THROUGH NOTCH ON EACH HOLE and A .030" x .030" x .005+/- .001" CORNER NOTCH IN EACH HOLE. SURFACE NOTCHES: .008... | 1 | |
| AFNDT-2124 | CUSTOM REFERENCE STANDARD PER SPEC, 2024-T42. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2125/AL | CUSTOM MULTI HOLE ET STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9//16", 5/8", 3/4". EDM NOTCH: .030" x .030" x .005" +/-.002" and .020" x .020" x .005" +/-.002". Includes Test Report and Certificate o | 1 | |
| AFNDT-2125/S | CUSTOM MULTI HOLE ET STANDARD. MATERIAL: 4130 STEEL. HOLE SIZES: 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9//16", 5/8", 3/4". EDM NOTCH: .030" x .030" x .005" +/-.002" and .020" x .020" x .005" +/-.002". Includes Test Report and Certificate of Conf | 1 | |
| AFNDT-2125/TI | CUSTOM MULTI HOLE ET STANDARD. MATERIAL: 6AL-4V TITANIUM. HOLE SIZES: 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4". EDM NOTCH: .030" x .030" x .005" +/-.002" and .020" x .020" x .005" +/-.002". 3 SURFACE EDM NOTCHES: .008", .020"... | 1 | |
| AFNDT-2127 | SAFRAN MESSIER -BUGATTI-DOWTY REFERENCE STANDARD Material aluminum 7075-T6; Thickness 1/2". - Number of holes 5;- hole diameter 9/16 in, 10/16 in, 11/16 in, 12/16 in, 13/16 in; EDM notch in each hole: thru the thickness, depth and width in according with | 1 | |
| AFNDT-2130AL | 9 HOLE REFERENCE STANDARD 7075-T6, HOLE SIZES, 1/2",, 9/16" , 5/8", 11/16, 3/4", 13/16", 7/8", 15/16", 1.0", .030X.030 CORNER NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2130S | 9 HOLE REFERENCE STANDARD 4130 STEEL, HOLE SIZES, 1/2",, 9/16" , 5/8", 11/16, 3/4", 13/16", 7/8", 15/16", 1.0", .030X.030 CORNER NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2130TI | 9 HOLE REFERENCE STANDARD 6Al-4V Titanium , HOLE SIZES, 1/2",, 9/16" , 5/8", 11/16, 3/4", 13/16", 7/8", 15/16", 1.0", .030X.030 CORNER NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2132/2024-T3 | 20 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16, 15/32, 1/2, 9/16, 1/2, 17/32, 9/16",19/32", 5/8", 21/32", 11/16", 23/32", 3/4". TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x ... | 1 | |
| AFNDT-2133/304L | 20 HOLE REFERENCE STANDARD 304L STAINLESS STEEL. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 17/32, 9/16,19/32, 5/8, 21/32, 11/16, 23/32, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001. I | 1 | |
| AFNDT-2133/4130 | 20 HOLE REFERENCE STANDARD 4130 CARBON STEEL. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 17/32, 9/16,19/32, 5/8, 21/32, 11/16, 23/32, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001. Incl | 1 | |
| AFNDT-2133/6AL4V | 20 HOLE REFERENCE STANDARD 6AL-4V TITANIUM. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 17/32, 9/16,19/32, 5/8, 21/32, 11/16, 23/32, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001. Includ | 1 | |
| AFNDT-2133/7075T6 | 20 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 17/32, 9/16,19/32, 5/8, 21/32, 11/16, 23/32, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001. Inclu | 1 | |
| AFNDT-2133AL-1 | 20 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 17/32, 9/16,19/32, 5/8, 21/32, 11/16, 23/32, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001 NOTCH | 1 | |
| AFNDT-2136 | 12 HOLE REFERENCE STANDARD 6061-T6. HOLE SIZES: 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4". .030" x .030" x .005" +/- .001" W CORNER NOTCH IN EACH HOLE. SURFACE NOTCHES: .008", .020", .040" . .005" +/-.001". Includ | 1 | |
| AFNDT-2137/6AL4V | 3 HOLE REFERENCE STANDARD 6AL-4V TITANIUM. HOLE SIZES: 7/32, 1/4, 9/32 TOTAL OF 3 EDM THROUGH NOTCHES .020 DEEP. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2138/6AL-4V | 3 HOLE COUNTERSINK REFERENCE STANDARD 6AL-4V TITANIUM. HOLE SIZES: 7/32, 1/4, 9/32 TOTAL OF 3 EDM THROUGH NOTCHES .020 DEEP. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2140/304L | 11 HOLE REFERENCE STANDARD IN 304L STAINLESS STEEL; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), WITH .030"x.030" CORNER EDM NOTCH IN EACH HOLE.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2140/4130 | 11 HOLE REFERENCE STANDARD IN 4130 CARBON STEEL; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16,5/8,11/16, 3/4), WITH .030"x.030" CORNER EDM NOTCH IN EACH HOLE.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2140/6AL4V | 11 HOLE REFERENCE STANDARD IN 6AL-4v Ti; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), WITH .030"x.030" CORNER EDM NOTCH IN EACH HOLE.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2140/7075 | 11 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), WITH .030"x.030" CORNER EDM NOTCH IN EACH HOLE.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2141AL | 12 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .030" x .030" CORNER EDM NOTCH and .020" MID-WALL EDM NOTCH IN EACH HOLE. Tolerance: .005" +/-.001". Includes Test Repo | 1 | |
| AFNDT-2144 | 13 HOLE REFERENCE STANDARD 7075-T6 Auminum. Hole Sizes: (5/32",3/16", 7/32" ,1/4", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 1.0"), . 040" DEEP x .005" WIDE +0.00/-.002" THROUGH EDM NOTCH in EACH HOLE. Includes Test Report and Certificate of Co | 1 | |
| AFNDT-2145AL | Custom calibration standard containing 4 hole sizes of 5mm, 6mm, 8mm and 10mm. Each hole has a .100" x .100" x .005" W +/- .002". Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2145MG | Custom calibration standard containing 4 hole sizes of 5mm, 6mm, 8mm and 10mm. Each hole has a .100" x .100" x .005" W +/- .002". Material: Mgnesium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2149AL | 13 HOLE REFERENCE STANDARD 7075-T7 Auminum. Hole Sizes: (5/32",3/16", 7/32" ,1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.0"), . 020" DEEP x .005" MAX WIDTH THROUGH EDM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2149AL-1 | 13 HOLE REFERENCE STANDARD 7075-T7 Auminum. Hole Sizes: (5/32",3/16", 7/32" ,1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.0"), . 040" DEEP x .005" MAX WIDTH THROUGH EDM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2149SS | 13 HOLE REFERENCE STANDARD 304 Stainless Steel. Hole Sizes: (5/32",3/16", 7/32" ,1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.0"), . 020" DEEP x .005" MAX WIDTH THROUGH EDM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2150AL | 9 HOLE REFERENCE STANDARD 7075-T6, HOLE SIZES, 3/16",, 7/32" , 9/32", 5/16, 11/32", 3/8", 7/16", 5/8", 3/4", CORNER EDM NOTCH .030X.030 +/- 10%; WIDTH: .005+/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2151AL | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.005"W + .001"), MATERIAL: 5086 H32 ALUMINUM. (29.0% IACS. SIZE: 80mm(3.15") L +5mm(.197") x 30mm(1.18") W +5mm(.197") x 8mm(.315") THICK +3mm(.118"). Includes Mill Certifica... | 1 | |
| AFNDT-2227TI-1 | 8 HOLE CALIBRATION STANDARD, HOLE SIZES; 1/8 5/3 | 1 | |
| AFNDT-2227Ti | CUSTOM TITANIUM EDDY CURRENT MULTI HOLE STANDARD WHICH COMBINES BOEING PART NUMBERS NDT1022-NDT1027 STANDARDS INTO ONE PART..HOLE SIZES ( 0.188", 0.250", 0.313", 0.375",0.438", 0.500" ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2227Ti-1 | 8 Hole Calibration Standard, Hole Sizes; 1/8" 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", EDM NOTCH: .050" x .050" x .005" +0.000/-.002" BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, 737 PT 6 51-00-00 FIG 3 PROCEDURE 17, PG.8 MATERIAL(6AL-4V) TIT | 1 | |
| AFNDT-3001 | Embraer 170 reference standard with a .473" diameter hole. Per NDTM PT1 51-00-00-916-802-A , 1.4mm x 1.4mm +/-.05mm long x 0.1mm +/-.05 wide corner EDM notch. Material: 7050-T7 Aluminum. Block size 2.0" x 2.0" x .375". Includes Test Report and Certifica | 1 | |
| AFNDT-3007 | SURFACE NOTCH REFERENCE STANDARD 15-5 PH STEEL. EDM NOTCH SIZE: FULL WIDTH OF PART x .20mm(.008") WIDE x .50mm(.020") DEEP +/- .05mm(.002"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3009 | CUSTOM BOLT HOLE STANDARD 6AL-4V TITANIUM. HOLE SIZES: 7/32", 7/4", 9/32" CONTAINING 0.020" DEEP x .005" WIDE edm NOTCHES IN THE COUNTERSINK OF EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3011AL | 4 HOLE REFERENCE STANDARD 7075-T6,1/8"(3.2mm),5/32"(3.9mm),1/4"(6.5mm),9/32"(7.1mm), .005" +/-.001" THROUGH NOTCH ON EACH HOLE and .030" x .030" x .005+/- .001" CORNER NOTCH IN EACH HOLE. .005" +/-.001". Includes Test Report and Certificate of Confor... | 1 | |
| AFNDT-3012AL | 9 HOLE REFERENCE STANDARD PER BOEING 737 NTM 51-00-00 PG 9 FIGURE 3 SPECIFICATION. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES, 1.0",1.125",1.250", 1.375", 1.500"", 1.625", 1.750", 1.875", 2.00", .030"x.030" and .020"x.020" CORNER NOTCH .005+/-.002. Includ... | 1 | |
| AFNDT-3015 | EMBRAER 170/190 SERIES EDDY CURRENT SURFACE REFERENCE STANDARD 50-00-00 PT 1 PAGE 4, Aluminum(7075-T6) 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05mm WIDE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3018TI | CUSTOM TITANIUM BORE HOLE STANDARD WITH 2.200" BORE with 2 EDM FLAWS .030" CORNER NOTCH, .060"x.030" MID-BORE NOTCH. MATERIAL: 6AL-4V. SIZE 3.0" X 3.0" X 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3019S | CUSTOM AIR FORCE EDDY CURRENT BOLT HOLE STANDARD PER CUSTOMER SUPPLIED DRAWING, 1/4" 8630 STEEL PLATE (4130 EQUIVALENT ALTERNATIVE). EDM: 0.030 x 0.030 CORNER NOTCH. HOLE DIAMETER= 0.437Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3020AL | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .040", .060", .080", .100", .150", .200" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3020CS | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .040", .060", .080", .100", .150", .200" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3020TI | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .040", .060", .080", .100", .150", .200" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3022 | BOMBARDIER SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL 7075-T6 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of Conformance. ( Similar to Specification BD-700 PT 6 ... | 1 | |
| AFNDT-3023 | BOMBARDIER SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL 7050-T74 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of Conformance. ( Similar to Specification BD-700 PT 6... | 1 | |
| AFNDT-3024AL | 12 HOLE REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .020" X .004" +/- .002" WIDE THROUGH EDM NOTCH IN EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010"... | 1 | |
| AFNDT-3025AL | Eddy Current Surface Standard 7075-T6 Aluminum. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W x... | 1 | |
| AFNDT-3025CS | Eddy Current Surface Standard 4340 Carbon Steel. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W ... | 1 | |
| AFNDT-3025INC | Eddy Current Surface Standard 718 Inconel. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W x (25m... | 1 | |
| AFNDT-3025SS | Eddy Current Surface Standard 304 Stainless Steel. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)... | 1 | |
| AFNDT-3025TI | Eddy Current Surface Standard 6AL-4V Titanium. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W x ... | 1 | |
| AFNDT-3026AL | EDDY CURRENT SURFACE REFERENCE STANDARD Leonardo Helicopters SB No. 109EP-158. MATERIAL: 7475-T7 ALUMINUM. SIZE: 1.0" x 3.0" x .25" EDM SLOT (0.5mm DEEP) x (0.05-0.25mm WIDE) +/-.03mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3027AL | MHS style Multi-Hole reference standard (Aluminum 7075-T6 with certifications). 12 Holes 3/16", 7/32", 1/4" ,9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" ( .030 x .030 x .006 +/- .001) Corner Notches and .010, .020, .040 Surface notch... | 1 | |
| AFNDT-3028AL | 3i-Hole reference standard (Aluminum 7075-T6 with certifications). Hole Sizes , 7/16", 1/2" and 11/16" ( .030 x .030 x .006 +/- .001) Corner Notches. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3032 | 3 HOLE 100° COUNTERSINK REFERENCE STANDARD 2024-T3 ALUMINUM, PLATE SIZE: 3.0" x 2.0" x 1/4" . HOLE SIZES: 5/32", 3/16" and 1/4" TOTAL OF 3 EDM NOTCHES .040" +0.004"/-0.000" Long x .007" Max Width Through the Depth of the Countersink. | 1 | |
| AFNDT-3032-1 | 3 HOLE 100° COUNTERSINK REFERENCE STANDARD 7075-T6 ALUMINUM, PLATE SIZE: 3.0" x 2.0" x 1/4" . HOLE SIZES: 3/16", 7/32" and 1/4" TOTAL OF 3 CORNER EDM NOTCHES: .030" +0.004"/-0.000" Long x .007" Max Width Through the Depth of the Countersink. Includes Tes | 1 | |
| AFNDT-3034AL | Custom Bolt Hole / Countersink Reference Standard Combination Containing 6 Bolt Hole Sizes of .171", .218", .281", .343", .406", .500". EDM Slot Size: .030" x .030" x .005" Wide +/- .001". 5 Holes with 100° Countersinks, Hole Sizes: .218", .312", .37... | 1 | |
| AFNDT-3035SS | EDDY CURRENT SURFACE REFERENCE STANDARD. EDM NOTCHES: .005", .010", .020", .060" (.005"W +/- .002, MAX.007" WIDE). MATERIAL: 301 1/2 HARD STAINLESS STEEL(MIL-S-5059) 1.0"W x 4.0"L x .125", NOTE: .750" DISTANCE BETWEEN EACH NOTCH. Includes Test Repor... | 1 | |
| AFNDT-3036AL | CUSTOM 2 HOLE EDDY CURRENT REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: .250" and .875" WITH a .030" x .030" x .007" MAX WIDTH CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3037 | CUSTOM EDDY CURRENT HOLE REFERENCE STANDARD. MATERIAL: 718 INCONEL. HOLE SIZE: .256"Ø WITH a 0.1" x 0..1" x .010" +/- .002" EDM NOTCH IN THE BOTTOM RADIUS OF THE HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3038 | CUSTOM BOND LINE STANDARD. 3.0" x 6.0" LONG, 2024-T351 ALUMINUM. BOEING BMS 5-101 ADHESIVE. QUANTITY OF 2 0.5" x 0.5" DISBOND VOIDS. | 1 | |
| AFNDT-3051AL | (Aluminum Multi-hole reference standard with certificate. Contains 2 rows of 6 hole sizes. The first row has no flaws or side drilled holes. The second row includes side drilled holes. Hole Sizes: 3/16", 1/4", 5/16", 3/8", and 1/2". Material: 7075-T6 ... | 1 | |
| AFNDT-3052AL | (Aluminum Multi-hole reference standard with certificate. Contains 2 rows of 29 hole sizes. The first row has no flaws or side drilled holes. The second row includes side drilled holes. Hole Sizes: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32"... | 1 | |
| AFNDT-3053AL | 11 STEP THICKNESS STANDARD. STEP SIZES: .010", .020", .030", .040", .050", .060", .070", .080", .090", ..100", .110" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3055 | EDDY CURRENT SURFACE REFERENCE STANDARD. Low Hydrogen Embrittlement Cadmium-Titaniium Alloy Plating per BAC5804. 3 EDM FLAWS ON BOTH SIDES. ONE SIDE UNPLATED(BARE). NOTCH DEPTHS : .010", .020", .050". NOTCH WIDTH: (.007" +/- .002"). MATERIAL: 4330 STE... | 1 | |
| AFNDT-3056AL | 10 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. Hole Sizes: 3/16", 7/32" ,1/4", 9/32", 5/16", 3/8", 7/16", 1/2", 9/16', 5/8". Corner EDM Notches: .020" x .020" x .005" +/- .001" Wide and Mid-Wall EDM Notches .020" x .020" x .005" +/- .001" Wide in Each... | 1 | |
| AFNDT-3058/INC | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .5mm, 1.0mm, 2.0mm x (.006"Wide +/- .001). MATERIAL: 718 Inconel. SIZE: 1.0" Wide x 4.0" Long x 0.25" Thick. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3059 | Custom Eddy Current 2 Hole Calibration Standard per Customer Supplied Drawing. Material: 7050-T7451. Hole Sizes: .516"Ø and .812"Ø with a total of 4 EDM Notches 0.021" x 0.021" x .004" Wide Max. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3060 | Custom Eddy Current 2 Hole Calibration Standard per Customer Supplied Drawing. Material: 7050-T7451. Hole Sizes: .252"Ø and .516"Ø with a total of 4 EDM Notches 0.021" x 0.021" x .004" Wide Max. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3061AL | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005", .010", .020" (.004"W +/- .002), 7075-T7 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3070/7475 | 6 STEP THICKNESS STANDARD. STEP SIZES: .030", .050", .100", .150", .300", .500" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7475-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3070AL | 6 STEP THICKNESS STANDARD. STEP SIZES: .030", .050", .100", .150", .300", .500" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3071 | Custom designed eddy current multi-layer aircraft aluminum skin test specimen, drawing 2, sheets 1-4. reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3072 | Custom designed eddy current aircraft calibration standard, Drawing 3, Sheets 1-3, for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 1 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 2 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 3 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3074AL | 12 Hole reference standard. Material: 2024-T3 Aluminum. Contains 12 hole sizes; 3/16 inch (4.74mm) 7/32 inch (5.53mm) 1/4 inch (6.35mm) 9/32 inch (7.13mm) 5/16 inch (7.92mm) 11/32 inch (8.71mm) 3/8 inch (9.52mm) 7/16 inch (11.09mm) 1/2 inch (12.7mm) 9/16 | 1 | |
| AFNDT-3081AL | 3 HOLE REFERENCE STANDARD 2024-T3 ALUMINUM.. HOLE SIZES: 5/16", 3/8", 7/16" TOTAL OF 3 EDM CORNER NOTCHES .030" x .030". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-30CTI | REFERENCE STANDARD, 30 CORNER NOTCHES, 12" X 4" , 6AL-4V TI | 1 | |
| AFNDT-3100/2024 | CUSTOM THICKNESS STANDARD, 2024-T3 or 2024-T4 ALUMINUM. SIZE: 50mm X 50mm X 10mm +/- 1mm or 1.97" x 1.97" x .397" +/- .039". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3100/304 | CUSTOM THICKNESS STANDARD, 304 STAINLESS STEEL. SIZE: 50mm X 50mm X 10mm +/- 1mm or 1.97" x 1.97" x .397" +/- .039". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3100/6061 | CUSTOM THICKNESS STANDARD, 6061-T3 or 6061-T4 ALUMINUM. SIZE: 50mm X 50mm X 10mm +/- 1mm or 1.97" x 1.97" x .397" +/- .039". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3100/7075 | CUSTOM THICKNESS STANDARD, 7075-T6 or 7075-T7 ALUMINUM. SIZE: 50mm X 50mm X 10mm +/- 1mm or 1.97" x 1.97" x .397" +/- .039". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3100/TI | CUSTOM THICKNESS STANDARD, 6-2-4-2 TITANIUM. SIZE: 50mm X 50mm X 10mm +/- 1mm or 1.97" x 1.97" x .397" +/- .039". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3100/WAS25 | CUSTOM THICKNESS STANDARD, WASPALOY 25. SIZE: 50mm X 50mm X 10mm +/- 1mm or 1.97" x 1.97" x .397" +/- .039". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3104 | The VMA.01-0-07 reference standard is ..3 ½” long x 3.0” wide x 1/4” thick...• The tapered notch on both standards is 0.080” deep at the edge of the standard and tapers to 0.000” deep...• The tapered notch has scribe marks every 0.010” deep from 0.000”... | 1 | |
| AFNDT-3110A | Custom Multi-Hole Standard made to the Specifications of 99A53003001101. Material: 2024-T351. 48 Total Hole Sizes: 33/64, 17/32, 35/64, 9/16, 37/64, 19/32, 39/64, 5/8, 41/64, 21/32,43/64, 11/16. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3110B | Custom Multi-Hole Standard made to the Specifications of 99A53003001101. Material: 2024-T351. 36 Total Hole Sizes: 45/64, 23/32, 47/64, 3/4, 49/64, 25/32, 51/64, 13/16, 53/64. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3110C | Custom Multi-Hole Standard made to the Specifications of 99A53003001101. Material: 2024-T351. 24 Total Hole Sizes: 27/32, 55/64, 7/8, 57/64, 29/32, 59/64. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3110D | Custom Multi-Hole Standard made to the Specifications of 99A53003001101. Material: 2024-T351. 20 Total Hole Sizes: 15/16, 61/64, 31/32, 63/64, 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3112 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2024-T3 Aluminum. Plate Size: 2.0" x 4.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3112/2014-T6 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2014-T6 Aluminum. Plate Size: 2.0" x 5.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3112/2024-T6 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2024-T6 Aluminum. Plate Size: 2.0" x 5.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3113 | Custom Bolt hole Standard, Hole Size; 5/8"Ø inch diameter Hole. .020" Thru EDM notch .005" Wide(+/- .001"). Material: 7075-T6 Aluminum. Plate Size: 2.0" x 2.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3114 | 16 HOLE REFERENCE STANDARD 6AL-4V TITANIUM. 2 OF EACH HOLE SIZES: 3/16", 13/64" 7/32" , 1/4", 17/64", 9/32", 7/16", 9/16". .030" x .030" CORNER NOTCH IN 1st HOLE SET and .060" x .020" MID-WALL NOTCH IN 2nd HOLE SET. Tolerance: .006" +/-.001". Includ... | 1 | |
| AFNDT-3115 | 16 HOLE REFERENCE STANDARD 4340 CRES STEEL. 2 OF EACH HOLE SIZES: 3/16", 13/64" 7/32" , 1/4", 17/64", 9/32", 7/16", 9/16". .030" x .030" CORNER NOTCH IN 1st HOLE SET and .060" x .020" MID-WALL NOTCH IN 2nd HOLE SET. Tolerance: .006" +/-.001". Includ... | 1 | |
| AFNDT-3116 | 16 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. 2 OF EACH HOLE SIZES: 3/16", 13/64" 7/32" , 1/4", 17/64", 9/32", 7/16", 9/16". .030" x .030" CORNER NOTCH IN 1st HOLE SET and .060" x .020" MID-WALL NOTCH IN 2nd HOLE SET. Tolerance: .006" +/-.001". Inclu... | 1 | |
| AFNDT-3117/15-5PH | Custom EC 14 Hole Standard. Hole sizes: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters.EDM NOTCH: .050" x .050" CORNER NOTCH IN EACH HOLE. 3 SURFACE EDM NOTCHES .010", .020", .040" DEEP x .750" LONG.) Ma | 1 | |
| AFNDT-3117/7075-T6 | Custom EC 14 Hole Standard. Hole sizes: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters.EDM NOTCH: .050" x .050" CORNER NOTCH IN EACH HOLE. 3 SURFACE EDM NOTCHES .010", .020", .040" DEEP x .750" LONG.) Ma | 1 | |
| AFNDT-3117/TI | Custom EC 14 Hole Standard. Hole sizes: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters.EDM NOTCH: .050" x .050" CORNER NOTCH IN EACH HOLE. 3 SURFACE EDM NOTCHES .010", .020", .040" DEEP x .750" LONG.) Ma | 1 | |
| AFNDT-3120AL | 11 hole Reference Standard 7075-T6 Aluminum. Contains 10 hole sizes; 7/64, 1/8, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4 and 1.0 inch diameters.( .030X.030 Corner EDM Notch and 3 Surface EDM Notches at .010", .020", .040" DEEP x .750" LONG.) Includes T... | 1 | |
| AFNDT-3121S | 10 hole Reference Standard 4340 or 4130 Carbon Steel. Contains 10 hole sizes; 1/8, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 inch diameters.( .030" x .030" +/- 10% x .006" +/- .001" Wide Corner EDM Notch and 3 Surface EDM Notches at .010", .020", ... | 1 | |
| AFNDT-3122T-0 | 10 hole Reference Standard 6AL-4v Titanium. Contains 10 hole sizes; 1/8, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 inch diameters.( .030" x .030" +/- 10% x .006" +/- .001" Wide Corner EDM Notch and 3 Surface EDM Notches at .010", .020", .040" Dee... | 1 | |
| AFNDT-3122T-4 | 10 hole Reference Standard 6AL-4v Titanium. Contains 10 hole sizes; 1/8, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 inch diameters.( .050" x .050" +/- 10% x .006" +/- .001" Wide Corner EDM Notch and 3 Surface EDM Notches at .010", .020", .040" Dee... | 1 | |
| AFNDT-3128AL | BOEING ALL AIRCRAFT MODELS 51-00-16 PT 6 FIG 3. MULTIHOLE STANDARD WITH 11 HOLES SIZES: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.00". EDM NOTCHES: .020 x .020 X .005" +/-0.002 wide on one side and .030 x .030 .005" +/-0.002 wi... | 1 | |
| AFNDT-3129CS | BOEING ALL AIRCRAFT MODELS 51-00-17 PT 6 FIG 3. MULTIHOLE STANDARD WITH 11 HOLES SIZES: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.00". EDM NOTCHES: .030 x .030 .005" +/-0.002. MATERIAL: 4340 STEEL. Includes Test Report Traceab... | 1 | |
| AFNDT-3130TI | BOEING ALL AIRCRAFT MODELS 51-00-14 PT 6 FIG 3. MULTIHOLE STANDARD WITH 11 HOLES SIZES: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.00". EDM NOTCHES: .050 x .050(+/-.005") x .005" (+0.00/-.002). MATERIAL: 6AL-4V TITANIUM. Includ... | 1 | |
| AFNDT-3133 | CUSTOM 100° COUNTERSINK BOLT HOLE STANDARD MAUNUFACTURED TO BOEING PART NUMBER 194A, 737 PART 6 53-30-00. MATERIAL: 2024-T3 CLAD ALUMINUM. HOLE SIZES: 2 HOLES 8.6mmØ. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3136-7075T6 | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030 and .020 x .020 Corner EDM Notches in each Hole. Material: 7075-T6 Aluminum | 1 | |
| AFNDT-3136/2024T3 | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030 and .020 x .020 Corner EDM Notches in each Hole. Material: 2024-T3 Aluminum | 1 | |
| AFNDT-3137AL | 14 Hole Calibration Standard, Hole Sizes; 1/8" 5/32", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4 inch diameters. ( .030 x .030 and .020 x .020 Corner EDM Notches in each Hole Per Boeing B737 PT 6 51-00-00 Prodedure 1 | 1 | |
| AFNDT-3139AL | 11 HOLE REFERENCE STANDARD in 7075-T6 Aluminum; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6... | 1 | |
| AFNDT-3139CS | 11 HOLE REFERENCE STANDARD in 4130 Carbon Steel; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16,5/8,11/16, 3/4), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6... | 1 | |
| AFNDT-3139TI | 11 HOLE REFERENCE STANDARD in 6AL-4V Titanium; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6 ... | 1 | |
| AFNDT-3140AL | 7 HOLE REFERENCE STANDARD in 7075-T6 Aluminum; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6 FIG 3, 14 Notches Tota... | 1 | |
| AFNDT-3141AL | Custom McDonnell Douglas 12 bolt hole reference standard 7075-T6 Aluminum with a .060"L x .030Dx .005" max width mid-wall notch, and .030"x.030"x.005" max width corner notch in each hole. Hole sizes (.125, .156", .187", .250", .281", ..312", .375", .4... | 1 | |
| AFNDT-3141AL-1 | Custom McDonnell Douglas 12 bolt hole reference standard 7075-T6 Aluminum with .005" max width through EDM notch in holes #1-#6 and a .060"L x .030"D x .005" max width mid-wall notch in holes #7-12, and .030"x.030"x.005" max width corner notch in each hol | 1 | |
| AFNDT-3141AL-2 | Custom McDonnell Douglas 12 bolt hole reference standard 7075-T6 Aluminum with a .060"L x .030Dx .005" max width mid-wall notch, and .030"x.030"x.005" max width corner notch in each hole. Hole sizes (.2966, .3122", .3278", .3434", .359", ..3746", .3902", | 1 | |
| AFNDT-3145S | 12 HOLE REFERENCE STANDARD 4340 STEEL, 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", .020" x .005" +/-.001" THROUGH NOTCH ON EACH HOLE, A .030" x .030" x .005+/- .001" CORNER NOTCH IN EACH HOLE. SURFACE NOTCHES: .01... | 1 | |
| AFNDT-3146AL | 12 hole Reference Standard. Hole sizes: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters, .030" x .030" x .005" +/-.002" Wide Corner EDM Notches and .020" x .020" x .005" +/-.002" Wide Mid-Wall EDM Notches. Materia... | 1 | |
| AFNDT-3147AL | 7 HOLE 100° COUNTERSINK REFERENCE STANDARD 2024-T3 ALUMINUM, PLATE SIZE: 3.0" x 2.5" x 3/8" . HOLE SIZES: 5/32", 3/16", 7/32",1/4", 5/16",3/8", 7/16". TOTAL OF 7 EDM NOTCHES .030" +0.002"/-0.002" Long x .007" Max Width Through the Depth of the Countersin | 1 | |
| AFNDT-3148AL | 13 HOLE REFERENCE STANDARD, 7075-T6 ALUMINUM. HOLE SIZES: 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8" & 1". THRU EDM NOTCHES IN EACH HOLE, Depth: 0.040" +/- 0.001 x Width : 0.005" + 0 - 0.002". Includes Certification R... | 1 | |
| AFNDT-3151AL | 15 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM, HOLE SIZES: 1/8, 5/32, 3/16, 7/32 ,1/4, 9/32, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4,,7/8,1.0" .030" x .030" CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .750"L x .010",.020",.040" DEEP. Includes Test Report and | 1 | |
| AFNDT-3151CS | 15 HOLE REFERENCE STANDARD 4130 OR 4340 CARBON STEEL, HOLE SIZES: 1/8, 5/32, 3/16, 7/32 ,1/4, 9/32, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4,,7/8,1.0" .030" x .030" CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .750"L x .010",.020",.040" DEEP. Includes Test Re | 1 | |
| AFNDT-3151SS | 15 HOLE REFERENCE STANDARD 304 STAINLESS STEEL, HOLE SIZES: 1/8, 5/32, 3/16, 7/32 ,1/4, 9/32, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4,,7/8,1.0" .030" x .030" CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .750"L x .010",.020",.040" DEEP. Includes Test Report a | 1 | |
| AFNDT-3153/7075T6 | 11 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 7/16, 1/2, 9/16), WITH .050"x.050" .005±.001 CORNER EDM NOTCH IN EACH HOLE. | 1 | |
| AFNDT-3154CS | Eddy Current Surface Standard Carbon Steel. 0.5mm, 1.0mm,2.0mm Deep x .15mm Wide +/- .05mm. Block Size: 5.0"(127mm)L x 2.0"(50.8mm)W x .25"(6.35mm). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3154SS | Eddy Current Surface Standard 316 Steel. 0.5mm, 1.0mm,2.0mm Deep x .15mm Wide +/- .05mm. Block Size: 5.0"(127mm)L x 2.0"(50.8mm)W x .25"(6.35mm). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3155AL | • Each standard is 6” long x 3” wide x 1/2” thick. Contains14 holes with diameters of: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8” & 3/4”..• Each hole contains a 0.050” x 0.050” corner notch at the bottom of th... | 1 | |
| AFNDT-3155AL-1 | • Each standard is 6” long x 3” wide x 1/2” thick. Contains14 holes with diameters of: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8” & 3/4”• Each hole contains a 0.050” x 0.050” corner notch at the bottom of the cou | 1 | |
| AFNDT-3156 | Tapered Aluminum Standard. Material: 2024-T351 Aluminum. Taper: 0.039"-0.164". Dimensions: 1" x 4" x .25". Slot width = 0.75". Includes Test Report. | 1 | |
| AFNDT-3157 | Liquid Penetrant Standard. Meets the ASME Boiler Pressure Code, Section V & III, and MIL-I-23135-C. The cracked aluminum block is made from 2024 aluminum and is 3” x 2” x 3/8” thick. A 1/8" wide groove separates the blocks two sides to facilitate side-... | 1 | |
| AFNDT-3158 | 3 HOLE REFERENCE STANDARD. MATERIAL: 4130 CRES STEEL. HOLE SIZES: 3/16, 1/4, 5/16 TOTAL OF 3 EDM THROUGH NOTCHES .020 DEEP x .006" WIDE. Includes Certification Report. | 1 | |
| AFNDT-3159AL | 8 HOLE REFERENCE STANDARD, MATERIAL: 2024-T3 ALUMINUM., HOLE SIZES: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", .020" THROUGH NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3159TI | 8 HOLE REFERENCE STANDARD 6AL-4v TITANIU., HOLE SIZES: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", .020" THROUGH NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3160AL | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 2024-T3 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of... | 1 | |
| AFNDT-3160AL-1 | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 6061-T6 ALUMINUM, IACS 40.00-44.80. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and | 1 | |
| AFNDT-3160CS | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 4130/4340 CRES STEEL. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificat... | 1 | |
| AFNDT-3164AL | Custom NDI standard for F-15C/D inspection. Material: 2124-T8 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3166 | CUSTOM 2 HOLE REFERENCE STANDARD. MATERIAL: 718 INCONEL, BLOCK SIZE: .500" x 1.0" x 4.0" . HOLE SIZES: 5/16", 9/32" WITH -3( .030" x .060" x .005" W MID-WALL NOTCH ' | 1 | |
| AFNDT-3166AL | CUSTOM 13 HOLE REFERENCE 3 PLATE STANDARD, 7075-T6 ALUMINUM. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3167CS | CUSTOM HOLE REFERENCE STANDARD in 4130 OR 4340 STEEL; HOLE SIZES: 2 OF EACH SIZE HOLE FOR A TOTAL OF 4 HOLES. 2.5mm(.098"), ,3.5mm(.137") , WITH A .030"x.030" x .005" +/-.002" CORNER EDM NOTCH AND .020" x .005" THRU NOTCHES. | 1 | |
| AFNDT-3171AL | 17 HOLE REFERENCE STANDARD 7075-T6 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 11/16 and 3/4 diameters. Includes 15 Thru EDM Notches .040" +/- 10% x .005" +/- .001" Wide. Includes Test Report and Certificate ... | 1 | |
| AFNDT-3171CS | 17 HOLE REFERENCE STANDARD 4130/4340 Carbon Steel, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 11/16 and 3/4 diameters. Includes 15 Thru EDM Notches .040" +/- 10% x .005" +/- .001" Wide. Includes Test Report ... | 1 | |
| AFNDT-3171SS | 17 HOLE REFERENCE STANDARD 304 Stainless Steel, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 11/16 and 3/4 diameters. Includes 15 Thru EDM Notches .040" +/- 10% x .005" +/- .001" Wide. Includes Test Report and... | 1 | |
| AFNDT-3179AL | 100° Countersink Multi Hole Standard. Contains 12 hole sizes: 3mm, 5mm, 7mm, 9mm, 11mm, 13mm, 14mm,15mm, 16mm 17mm,18mm and 19mm diameters. (1mm x 1mm x 0.15mm ± 0.03mm) Corner EDM Notches. Material: 2024-T3 Aluminum. Includes Test Report and Certificat | 1 | |
| AFNDT-3180 | 6 FLAT BOTTOM HOLE REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. Hole Sizes: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8" .060" LONG X. 020" x DEEP x .005" WIDE +/- .001" WIDE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3181AL | REFERENCE STANDARD | 1 | |
| AFNDT-3189AL | 11 HOLE REFERENCE STANDARD IN 2024-T3 ALUMINUM; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), WITH .020" x .020" x .005" +/-.001" CORNER EDM NOTCH IN EACH HOLE. Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3197AL | BOEING REFERENCE STANDARD 737 PT 6 51-00-00 FIGURE 3 PG.9 & 777 PT 6 51-00-02 PAGE 7-8. HOLE SIZES: 1.000", 1.250" . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3198TI | 10 HOLE REFERENCE STANDARD 6AL-4V Titanium.Hole Sizes: (3/16", 7/32" ,1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.005" +/-.002" WIDE & .020" X. 020" x.005" +/-.002" WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES .500... | 1 | |
| AFNDT-3201/321SS | EDDY CURRENT SURFACE REFERENCE STANDARD, 321SS 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3204/4130 | 8 HOLE REFERENCE STANDARD IN 4130 CARBON STEEL; HOLE SIZES: (1/8, 5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2), WITH .020"x.020" CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3204/7075 | 8 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (1/8, 5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2), WITH .020"x.020" CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3210 | SURFACE REFERENCE STANDARD, ONE EDM NOTCH .030" Deep x .040" wide x .060 long ( +/- .002), MATERIAL: 2024-T3 ALUMINUM. SIZE: 2.0"L x 2.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3211 | ALUMINUM TO ALUMINUM BONDED STANDARD. MATERIAL: 2024-T3 ALUMINUM, .063"/.040" WITH A 1.0" DISBOND. SIZE: 4.0" X 4.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3212AL | 13 HOLE REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 23/32". EACH HOLE CONTAINS A CORNER EDM NOTCH 030" x .030" x Width : 0.005" +/- 0.002". Includes Certif... | 1 | |
| AFNDT-3212ST | 13 HOLE REFERENCE STANDARD. MATERIAL: 4130 or 4340 CRES STEEL. HOLE SIZES: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 23/32". EACH HOLE CONTAINS A CORNER EDM NOTCH 030" x .030" x Width : 0.005" +/- 0.002". Includes... | 1 | |
| AFNDT-3212TI | 13 HOLE REFERENCE STANDARD. MATERIAL: 6AL-4V TITANIUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 23/32". EACH HOLE CONTAINS A CORNER EDM NOTCH 030" x .030" x Width : 0.005" +/- 0.002". Includes Certifi... | 1 | |
| AFNDT-3213AL | 2024-T3 Aluminum hole standard, hole diameter 5/32", notch type .030 x .030" Coner Notch". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3215AL | BOEING REFERENCE STANDARD. PT 6 51-0-00. 13 HOLE REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 5/32", 3/16", 1/4", 7/32", 9/32" 5/16" , 11/32", 3/8" ,7/16", 1/2", 9/16", 5/8", 3/4". EACH HOLE CONTAINS A CORNER EDM NOTCH: 0.030" x 0.030" a... | 1 | |
| AFNDT-3217AL | BOEING REFERENCE STANDARD. PT 6 51-0-00. 29 HOLE REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", ... | 1 | |
| AFNDT-3218AL | CUSTOM HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: 9/64,10/64,11/64,12/64,13/64, 14/64, 15/64, 16/64, 17/64, 18/64, 19/64... | 1 | |
| AFNDT-3219AL | CUSTOM HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: 37/64,38/64,39/64,40/64,41/64, 42/64, 43/64, 44/64, 45/64, 46/64, 47/6... | 1 | |
| AFNDT-3220ST | CUSTOM HOLE STANDARD IN 4340 OR 4340M STEEL PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .030" x .030" x .005" +/- .002" HOLE SIZES: 9/64,10/64,11/64,12/64,13/64, 14/64, 15/64, 16/64, 17/64, 18/64, 19/64, 20/64, 21/64, 22/64, 23/64, 24/64, ... | 1 | |
| AFNDT-3221ST | CUSTOM HOLE STANDARD IN 4340 OR 4340M STEEL PER BOEING PART NUMBER NDT1083. EDM CORNER NOTCH SIZES: .030" x .030" x .005" +/- .002" HOLE SIZES: 37/64,38/64,39/64,40/64,41/64, 42/64, 43/64, 44/64, 45/64, 46/64, 47/64, 48/64, 49/64, 50/64, 51/64, 52/64... | 1 | |
| AFNDT-3222TI | CUSTOM HOLE STANDARD IN 6AL-4V TITANIUM PER BOEING PART NUMBER NDT1027. EDM CORNER NOTCH SIZES: .050" x .050" x .005" + 0.000 / - 0.002" HOLE SIZES:9/64,10/64,11/64,12/64,13/64, 14/64, 15/64, 16/64, 17/64, 18/64, 19/64, 20/64, 21/64, 22/64, 23/64, 24/... | 1 | |
| AFNDT-3223TI | CUSTOM HOLE STANDARD IN 6AL-4V TITANIUM PER BOEING PART NUMBER NDT1027. EDM CORNER NOTCH SIZES: .050" x .050" x .005" +0.000 / - 0.002" HOLE SIZES: 37/64,38/64,39/64,40/64,41/64, 42/64, 43/64, 44/64, 45/64, 46/64, 47/64, 48/64, 49/64, 50/64, 51/64, 5... | 1 | |
| AFNDT-3224TI | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005", .010", .020", .040", .060" (.005"W +/- .002, MAX .007"). MATERIAL: 6AL-4v TITANIUM@2.2IACS. SIZE: 1.0"W x 6.0"L x .500". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3225AL | 12 HOLE REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .020" X .004" +/- .002" WIDE THROUGH EDM NOTCH IN EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010"... | 1 | |
| AFNDT-3225I | 12 HOLE REFERENCE STANDARD. MATERIAL: 718 INCONEL.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .020" X .004" +/- .002" WIDE THROUGH EDM NOTCH IN EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", .020... | 1 | |
| AFNDT-3225S | 12 HOLE REFERENCE STANDARD. MATERIAL: 4130 or 4340 CRES STEEL. Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .020" X .004" +/- .002" WIDE THROUGH EDM NOTCH IN EACH HOLE and 3 SURFACE EDM NOTCHES .750" LON... | 1 | |
| AFNDT-3225TI | 12 HOLE REFERENCE STANDARD. MATERIAL: 6AL-4V TITANIUM.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .020" X .004" +/- .002" WIDE THROUGH EDM NOTCH IN EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", ... | 1 | |
| AFNDT-3229AL | BOEING REFERENCE STANDARD. PT 6 51-0-00. 13 HOLE REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 3/16", 1/4", 7/32", 9/32" 5/16" , 11/32", 3/8" ,7/16", 1/2", 9/16", 5/8", 3/4". EACH HOLE CONTAINS A CORNER EDM NOTCH: 0.030" x 0.030" and 0.02... | 1 | |
| AFNDT-3231 | Custom McDonnell Douglas Low Frequency Eddy Current reference standard, 06-20-01 Figure 9 sheets 1-4. Material: 2024-T3 or 7075-T6 Aluminum. Fasteners: (NAS1097AD6-5 & BACB30NW6K3). Includes Test Report and Certificate of Confromance. | 1 | |
| AFNDT-3231-1 | Custom McDonnell Douglas Low Frequency Eddy Current reference standard, 06-20-01 Figure 9 sheets 1-4. Material: 2024-T3 or 7075-T6 Aluminum.Fasteners: (CR3223-5 & MS21141-5). Includes Test Report and Certificate of Confromance. | 1 | |
| AFNDT-3232F | Custom Hole Standard 2.0" x 2.0" x .25" Square. Material: Forged Aluminum. Hole Size: 16.5mm. EDM Corner Notch: .05mm x .05mm x .1mm Wide +/- 0.05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3233F | Custom Eddy Current Surface Standard. Size: 80mm x 35mm x 7mm. Material: Forged Aluminum. EDM Notch: .060" Long x .004" Wide x .030" Deep +/- 0.002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3235 | BOEING REFERENCE STANDARD PT 6 32-11-11. 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3239AL | 3 HOLE REFERENCE STANDARD 2024-T3 ALUMINUM. HOLE SIZES: 1/4", 5/16", 3/8" TOTAL OF 3 EDM CORNER NOTCHES .030" x .030". 3 EDM SURFACE NOTCHES 0.008", 0.020", 0.040". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3240AL | Aluminum multi-hole reference standard. Contains 5 hole sizes; 1/8, 5/32, 3/16, 7/32 and 1/4" inch hole diameters.( .030" x.030" corner EDM notch in each hole). Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3241AL | Aluminum Multi-hole reference standard. Material: 7075-T6 Aluminum. Contains 20 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 1.0" inch. Each hole contains on the | 1 | |
| AFNDT-3250/2024T3 | 12 Hole Calibration Standard, Hole Sizes; 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" inch diameters. ( .030 x .030 Corner and .020 x .020 Midwall EDM Notches in each Hole. Material: 2024-T3 Aluminum | 1 | |
| AFNDT-3251AL | 12 HOLE REFERENCE STANDARD 2024-T3 ALUMINUM. HOLE SIZES: 1/8", 3/16" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8",11/16", 3/4", 13/16" .030" x .030" CORNER NOTCH and .020" x .020" CORNER NOTCH IN EACH HOLE. Tolerance: .005" +/-.001", 4 SURFACE EDM NOTCH | 1 | |
| AFNDT-3251TI | 12 HOLE REFERENCE STANDARD 6AL-4V TITANIUM. HOLE SIZES: 1/8", 3/16" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8",11/16", 3/4", 13/16" .030" x .030" CORNER NOTCH and .020" x .020" CORNER NOTCH IN EACH HOLE. Tolerance: .005" +/-.001", 4 SURFACE EDM NOTCHE | 1 | |
| AFNDT-3252AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3252CS | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 4340 or 4130 Carbon Steel.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and | 1 | |
| AFNDT-3252TI | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 6AL-4V TITANIUM. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3255AL | 11 HOLE REFERENCE STANDARD in 7075-T6 Aluminum; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), With a .020" x .020" x .005" +/-.002" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3260AL | Olympus Style Aluminum multi-hole reference standard. Contains 5 hole sizes; 2.0mm, 2.5mm, 3.0mm, 3.5 and 4.0mm hole diameters. EDM notch 0.5mm deep in each hole, length is half of the material thickness. Material: 7075-T76 Aluminum 15mm Thick. Includes T | 1 | |
| AFNDT-3261AL | Olympus Style Aluminum multi-hole reference standard. Contains 11 hole sizes; 16.5mm, 17.0mm, 17.5mm, 18.0mm, 18.5mm, 19.0mm, 19.5mm, 20.0mm, 20.5mm, 21.0mm, and 21.5mm hole diameters. EDM notch = 0.5mm corner EDM notch and 0.5mm deep in each hole, length | 1 | |
| AFNDT-3262AL | Olympus Style Aluminum multi-hole reference standard. Contains 21 hole sizes; 4.0mm, 4.5mm 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 8.5mm, 9.0mm, 9.5mm, 10.0mm, 10.5mm, 11.0mm, 11.5mm, 12.0mm, 13.0mm, 14.0mm, 15.0mm and 16.0mm hole diameters. EDM | 1 | |
| AFNDT-3262TI | Olympus Style Aluminum multi-hole reference standard. Contains 21 hole sizes; 4.0mm, 4.5mm 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 8.5mm, 9.0mm, 9.5mm, 10.0mm, 10.5mm, 11.0mm, 11.5mm, 12.0mm, 13.0mm, 14.0mm, 15.0mm and 16.0mm hole diameters. EDM | 1 | |
| AFNDT-3264 | Custom Reference Standard for the Boeing Lead Screw inspection, equivalent to 7903385. Material: 4150 Alloy Steel, 1.5 Outside Diameter and 1.069" Inside Diameter with 3 EDM Flaws per BSS 7048 page 2 Table 1. Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3269AL | Custom Multi-Hole Standard manufactured to the Specifications of Airbus part number 99A53003001101. Material: 2024-T351. 8 Total Hole Sizes: 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10.0mm, 11.0mm, 12.0mm, 13mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3270AL | Aluminum Multi-hole reference standard. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8", 29/32", 15/16", 3 | 1 | |
| AFNDT-3271AL | Aluminum Multi-hole reference standard. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8", 29/32", 15/16", 3 | 1 | |
| AFNDT-3272CS | Multi-hole reference standard. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8", 29/32", 15/16", 31/32", 1. | 1 | |
| AFNDT-3272SS | Multi-hole reference standard. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8", 29/32", 15/16", 31/32", 1. | 1 | |
| AFNDT-3273TI | Aluminum Multi-hole reference standard. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8", 29/32", 15/16", 3 | 1 | |
| AFNDT-3274SS | Multi-hole reference standard. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8", 29/32", 15/16", 31/32", 1. | 1 | |
| AFNDT-3277 | Custom 2 Layer 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. 36 Total EDM Notches.1.) EDM Notch Specifications: .030 x .030 Corner EDM Notches in each Hole. 2.) Faying Surfa | 1 | |
| AFNDT-3279/15-5PH | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010", .020", .050" .007" ,MAX WIDTH, 15-5PH STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3279/Ti | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010", .020", .050" .007" ,MAX WIDTH, 6AL-4V TITANIUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3280 | Surface reference standard, 4340 Steel, with EDM notch depths of 0.5mm", 1.0" and 2.0mm +/-1.3mm, Notch Width: .18mm Max. Depth: +/- .03mm. Reference standard overall dImensions 25.4mm X 101.6mm X 6.4mm). Includeds .020" thick shim and Key Ring. Supplie | 1 | |
| AFNDT-3284SS | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005"(0.127mm), .010"(0.254mm), .020"(0.508mm), .050"(1.27mm) (.004"W +/- .001), 304 STAINLESS STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. REFERENCE P/N:29A049 | 1 | |
| AFNDT-3285/17-4 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005"(0.127mm), .010"(0.254mm), .020"(0.508mm) (.004"W +/- .002). Material: 17-4PH Steel Condition to TH1050. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3285/17-7 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005"(0.127mm), .010"(0.254mm), .020"(0.508mm) (.004"W +/- .002). Material: 17-7PH Steel Condition to TH1050. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3285/304 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005"(0.127mm), .010"(0.254mm), .020"(0.508mm) (.004"W +/- .002). Material: Non-Magnetic 304 Stainless Steel. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3286 | 12 HOLE REFERENCE STANDARD 7075-T6 (Hole Sizes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1.0", 1-1/8",) .020"x.020" and .030"x.030" x .005"W +/-.002" CORNER EDM NOTCH PER BOEING SPECIFICATION 747 PART 6 51-00-00 PAGE 8 FIGURE 3 | 1 | |
| AFNDT-3287AL | Custom multi-hole 100° countersink reference standard Material: 7075-T6 Aluminum. Hole sizes: 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2". Countersink holes opposite side. Thru hole EDM notches in each hole, .020" Deep x .005" Wide +/-.001". Includes T | 1 | |
| AFNDT-3290AL | Custom ST Aerospace Engineering Multi-Hole Standard 2 Plate Assembly, Manufactured to the Customer Supplied Drawing Specifications . Material: 7075-T6 Aluminum. 6 Total Hole Sizes to be determined. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3291AL | BOMBARDIER 15 HOLE METRIC REFERENCE STANDARD. CL-215T PART 6 PAGE 8 FIGURE 5 GENERAL. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: 4MM, 5MM, 6MM, 7MM, 8MM, 9MM, 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM, 18MM diameters. Includes 15 Thru EDM Notches 0.040 | 1 | |
| AFNDT-3291CS | BOMBARDIER 15 HOLE METRIC REFERENCE STANDARD. CL-215T PART 6 PAGE 8 FIGURE 5 GENERAL. MATERIAL: 4340 CARBON STEEL. HOLE SIZES: 4MM, 5MM, 6MM, 7MM, 8MM, 9MM, 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM, 18MM diameters. Includes 15 Thru EDM Notches 0.040 | 1 | |
| AFNDT-3292AL | CUSTOM 20 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .(1/8", 5/32",3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8",13/32" | 1 | |
| AFNDT-3295 | CUSTOM HOLE STANDARD IN 4340 OR 4340M STEEL PER BOEING PART NUMBER NDT1083 PART 6 51-00-00 PROCEDURE 19. EDM CORNER NOTCH SIZES: .030" x .030" x .005" +/- .002". 13 HOLE SIZES: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32, 9/ | 1 | |
| AFNDT-3296/316L | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters, .020 x .005" ± .002" Thru EDM Notches in each Hole. Material: 316L Stainless Steel. Includes Test Report and Certificate of Co | 1 | |
| AFNDT-3299/4340 | 12 HOLE REFERENCE STANDARD . HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .005" +/- .002" WIDE MID-WALL EDM NOTCH. Material: 4340 Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3299/6AL-4V | 12 HOLE REFERENCE STANDARD . HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .005" +/- .002" WIDE MID-WALL EDM NOTCH. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3299/7075-T6 | 12 HOLE REFERENCE STANDARD . HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .005" +/- .002" WIDE MID-WALL EDM NOTCH. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3303AL | SINGLE HOLE REFERENCE STANDARD 2024-T3 ALUMINUM, HOLE SIZE 3/8"( .375) EDM CORNER NOTCHES .030" x .030". BLOCK SIZE: 2.0" x 2.0" x 1/4" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3304/7075-T6 | 12 Hole reference standard. Material: 7075-T6 Aluminum. Contains 12 hole sizes; 3/16 inch (4.74mm) 7/32 inch (5.53mm) 1/4 inch (6.35mm) 9/32 inch (7.13mm) 5/16 inch (7.92mm) 11/32 inch (8.71mm) 3/8 inch (9.52mm) 7/16 inch (11.09mm) 1/2 inch (12.7mm) 9/16 | 1 | |
| AFNDT-3305AL | Custom 2 Hole Standard. Material: 7075-T6 Aluminum, Block Size: ..250" x 2.0" x 4.0" . HOLE SIZES:.098" and .188" Diameter with Type A% EDM Notch: .035" x .035" x .004" W ±.001". Includes Test Report and Certificate of Conformance Traceable to NIST. | 1 | |
| AFNDT-3306/2024T3 | EDDY CURRENT SURFACE REFERENCE STANDARD, METRIC NOTCHE SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: 2024-T3 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3306/7075T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, METRIC NOTCHE SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3306/MAG | EDDY CURRENT METRIC SURFACE REFERENCE STANDARD. EDM NOTCH SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: MAGNESIUM ZK60A-T5 PER ASTM-B107. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3307 | Custom 8 Hole Standard Manufactured to the Specifications of ATR Part Number 98S51605001-218, Part 6 51-60-00 Figure 616 Sheet 1. Material: 2024-T3 Aluminum, Block Size: .390" x 4.4" x 4.4"(10mm x 111.8mm x 111.8mm) . HOLE SIZES: 2.5mm and 3.2mm. Include | 1 | |
| AFNDT-3308AL | Eddy Current Calibration Standard 3/8” diameter hole standard. Material: 2024-T3 standard with a .030”x .030" corner notch. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3309AL | Custom Thin Plate Surface Standard. 7075-T76 Aluminum 10.0" x 10.0" x .050". 3 Surface EDM Notches ±.001" on Width. 1.) 0.010" x 0.200" x .004"W 2.) 0.015" x 0.200" x .004"W 3.) 0.020" x 0.200" x .004"W. Includes Test Report and Certificate of Conform | 1 | |
| AFNDT-3312AL | 12 HOLE REFERENCE STANDARD, 7075-T6 Aluminum. HOLE SIZES: 3/16", 7/32" 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .004" +/- .001" Wide Thru EDM Notch. A Total of 4 Surface EDM Notches .005", .010" .020", .040" Tolerance: . | 1 | |
| AFNDT-3314TI | 12 HOLE REFERENCE STANDARD, 6AL-4V TITANIUM. HOLE SIZES: 3/16", 7/32" 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .004" +/- .001" Wide Thru EDM Notch. A Total of 4 Surface EDM Notches .005", .010", .020", .050" Tolerance: . | 1 | |
| AFNDT-3315AL | EDDY CURRENT SURFACE REFERENCE STANDARD, 4 EDM NOTCHES .005", .010", .020" and .050" x (.004"W +/- .002). MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3319SS | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .020"(0.5mm), .040"(1.0mm), .079"(2.0mm) (.005"W +/- .002), 304 STAINLESS STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3320AL | 6 Hole reference standard (Aluminum 7075-T6 manufactured in accordance with Boeing Specification 51-00-02 Part 6 Procedure 1 or 2. Hole Sizes: 15/32", 17/32", 9/16", 11/16", 5/8", 3/4" ( .020" x .020" x .005" +/- .002), ( .030" x .030" x .005" +/- .002 | 1 | |
| AFNDT-3321AL | 5 Hole reference standard (Aluminum 7075-T6 manufactured in accordance with Boeing Specification 51-00-16 Part 6 Page 9 Figure 3. Hole Sizes: 11.5mm, 14.4mm, 14.6mm, 17.4mm and 17.5mm. Corner EDM Notches ( .020" x .020" x .005" +/- .002), ( .030" x .0 | 1 | |
| AFNDT-3329ST | CUSTOM 12 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737 PT 6 51-00-00, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: 3/16”(.188), 7/32”(.218),1/4”(.250), 9/32”(.281), 5/16”(. | 1 | |
| AFNDT-3329TI | CUSTOM 12 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737 PT 6 51-00-00, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: 3/16”(.188), 7/32”(.218),1/4”(.250), 9/32”(.281), 5/16”(. | 1 | |
| AFNDT-3332CS | 20 HOLE REFERENCE STANDARD 4340 STEEL. HOLE SIZES: 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16, 15/32, 1/2, 9/16, 1/2, 17/32, 9/16",19/32", 5/8", 21/32", 11/16", 23/32", 3/4". TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-. | 1 | |
| AFNDT-3338/17-4 | Surface reference standard, 17-4PH Steel, with EDM notch depths of 0.005", 0.010" and 0.020" inches +/-.001 (0.127mm, 0.254mm and .508mm), Notch Width: .004" +/-.001" Wide EDM notches, .005" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| AFNDT-3345AL | 5 STEP THICKNESS STANDARD. STEP SIZES: .020", .050", .100", .150", .200", +/-.002". MATERIAL: 2024-T3 ALUMINUM. SUPPLIED WITH DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3347CS | EDDY CURRENT WELD SURFACE REFERENCE STANDARD. EDM NOTCHES: 0.5mm, 1.0mm, 2.0mm (.1mm (.004") WIDE ± .05mm( .002") MAX WIDTH .152mm (.006"). MATERIAL: 4340 CARBON STEEL. SIZE: 1.0"W x 4.0"L Includeds 4 piece .020" thick shim and Key Ring set. Includes Tes | 1 | |
| AFNDT-3351AL | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 2024-T3 Aluminum. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3351AL-1 | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 Aluminum. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3351CS | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 1018 CARBON STEEL. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3353/2024T3 | Custom 12 Hole Reference Standard. Contains hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030) Corner EDM Notches and .020" mid-wall EDM Notches, 3 Surface EDM Notches .008", .020", .040" Deep | 1 | |
| AFNDT-3353/I625 | Custom 12 Hole Reference Standard. Contains hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030) Corner EDM Notches and .020" mid-wall EDM Notches, 3 Surface EDM Notches .008", .020", .040" Deep | 1 | |
| AFNDT-3356AL | 4 HOLE REFERENCE STANDARD. MATERIAL: 7075-T6, HOLE SIZES: 3/16",1/4", 3/4", 7/8". EDM NOTCH: .030" x .030" x .005+/- .001" CORNER NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3357/2024T4 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008"(0.2mm), .020"(0.5mm), .040"(1.0mm) (.004"W +/- .001), 2024-T4 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance and Material Certification. | 1 | |
| AFNDT-3363 | 11 STEP THICKNESS STANDARD. STEP SIZES: .100", .150", .200", .250", .300", .350", .400", .450", .500", ..550", .600" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3364 | 11 STEP THICKNESS STANDARD. STEP SIZES: .100", .150", .200", .250", .300", .350", .400", .450", .500", ..550", .600" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3368 | 12 Hole reference standard. Material: 4340 Steel. Contains 12 hole sizes; 3/16 inch (4.74mm) 7/32 inch (5.53mm) 1/4 inch (6.35mm) 9/32 inch (7.13mm) 5/16 inch (7.92mm) 11/32 inch (8.71mm) 3/8 inch (9.52mm) 7/16 inch (11.09mm) 1/2 inch (12.7mm) 9/16 inch ( | 1 | |
| AFNDT-3369/7075T6 | Custom 8 hole 100° countersink reference standard Material: 7075-T6 Aluminum. Hole sizes: 5/32", 3/16", 7/32" 1/4", 5/16", 3/8", 7/16", 1/2". Countersink holes opposite side. Thru hole EDM notches in each hole, .020" Deep x .005" Wide +/-.001". Includes | 1 | |
| AFNDT-3370/4340 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.25mm), .020"(0.5mm), .030"(0.76mm) (.004"W +/- .002), 4340 STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3370/7075T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.25mm), .020"(0.5mm), .030"(0.76mm) (.004"W +/- .002), 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3370/TI | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.25mm), .020"(0.5mm), .030"(.76mm) (.004"W +/- .002), 6AL-4v TITANIUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3386/7075T6 | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters, .040 x .005 ±.002" Through EDM Notches in each Hole. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3387AL | 6 Hole Metric reference standard. Material: 7075-T6 Aluminum. Hole Sizes: 20mm, 21mm, 22mm, 23mm, 24mm and 25mm. Corner EDM Notches: 1mm x 1mm x .15mm(.039" x .039" x .006"±.001"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3389/15-5 | 12 Hole Calibration Standard, Hole Sizes; 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 x .020 x .005" ± .002" Corner and .020" x .005" ± .002" Thru EDM Notches in each Hole, .010, .020, .040" x .750" Long Surfac | 1 | |
| AFNDT-3389/2024T3 | 12 Hole Calibration Standard, Hole Sizes; 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 x .020 x .005" ± .002" Corner and .020" x .005" ± .002" Thru EDM Notches in each Hole, .010, .020, .040" x .750" Long Surfac | 1 | |
| AFNDT-3389/4340 | 12 Hole Calibration Standard, Hole Sizes; 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 x .020 x .005" ± .002" Corner and .020" x .005" ± .002" Thru EDM Notches in each Hole, .010, .020, .040" x .750" Long Surfac | 1 | |
| AFNDT-3389/6AL4V | 12 Hole Calibration Standard, Hole Sizes; 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 x .020 x .005" ± .002" Corner and .020" x .005" ± .002" Thru EDM Notches in each Hole, .010, .020, .040" x .750" Long Surfac | 1 | |
| AFNDT-3390AL | CUSTOM 10 HOLE FLAT BOTTOM REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .188", .218", .250", 312", .375" .437" .500",.562", .625", | 1 | |
| AFNDT-3391AL | CUSTOM 10 HOLE FLAT BOTTOM HOLE REFERENCE STANDARD ASSEMBLY PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .875", 1.00", 1.125", 1.250" 1.375", 1.500", | 1 | |
| AFNDT-3392TI | Custom Titanium multi-hole reference standard. Contains 9 hole sizes; 2.0mm, 2.5mm 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm and 6.0mm hole diameters. EDM notch 0.5mm X 7.5mm deep in each hole (half of the material thickness). Material: 6AL-4V Titanium 15m | 1 | |
| AFNDT-3393TI | Custom Titanium multi-hole reference standard. Contains 9 hole sizes; 2.0mm, 2.5mm 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm and 6.0mm, 6.5mm. 7.0mm, 7.5mm, 8.0mm, 8.5mm, 9.0mm, 9.5mm, 10.0mm, 10.5mm, 11.0mm, 11.5mm, 12.0mm, 12.5mm, 13.5mm, 14.0mm, 14.5mm, | 1 | |
| AFNDT-3395 | CUSTOM EC SKIN INSPECTION REFERENCE STANDARD. Contains various EDM Nothes in the Upper and Lower Skin. Upper Skin Thickness of .080" and Lower Skin Thickness of .100" Thick. Standard Physical Size = 13.5" Long x 5.15" Wide. MATERIAL: 2024-T3 ALUMINUM. I | 1 | |
| AFNDT-3396CS | SURFACE NOTCH REFERENCE STANDARD 4130 or 4340 CARBON STEEL. EDM NOTCH SIZE: FULL WIDTH OF PART x .51mm(.020") DEEP +/- .05mm(.002"). BLOCK SIZE: 1.0" WIDE x 3.0" LONG. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3398AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .020", .030", .040", .050", .060", .070", .080", .090", .100" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3399S | 12 HOLE REFERENCE STANDARD 4340 STEEL.Hole Sizes: 6.35mm, 5.54mm, 4.75mm, 3.96mm, 3.18mm, 2.36mm. (1/4", 7/32", 3/16", 5/32", 1/8", 3/32"), 0.5mm x 0.5mm x 0.15mm (.0197" X .0197" x.0059")WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES 0.2mm, | 1 | |
| AFNDT-3400 | HOLE STANDARD | 1 | |
| AFNDT-3402AL | Metric Aluminum multi-hole reference standard. Contains 11 hole sizes; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, and 20mm hole diameters. EDM notch = 0.5mm x 0.5mm deep corner EDM notch in each of the Countersink Holes, 1mm x 1mm corner | 1 | |
| AFNDT-3402AL-1 | Metric Aluminum multi-hole reference standard. Contains 11 hole sizes; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, and 20mm hole diameters. EDM notch = 0.5mm x 0.5mm deep corner EDM notch in each of the Countersink Holes, 1mm x 1mm corner | 1 | |
| AFNDT-3402TI | Metric Aluminum multi-hole reference standard. Contains 11 hole sizes; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, and 20mm hole diameters. EDM notch = 0.5mm x 0.5mm deep corner EDM notch in each of the Countersink Holes, 1mm x 1mm corner | 1 | |
| AFNDT-3405AL | CUSTOM 15 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737 PT 6 51-00-00, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: 3/16”(.188), 7/32”(.218),1/4”(.250), 9/32”(.281), 5/16”(. | 1 | |
| AFNDT-3412 | Custom Eddy Current Surface Standard with a Total of 12 EDM Notches. Notch Lenghs of .125, .250", .375" and .625". Notch Depths of .008", .020", and .040" for each length. Material: Nickel Aluminum Bronze. Includes Test Report and Certificate of Conforman | 1 | |
| AFNDT-3413 | Custom Boeing Eddy Current Hole Standard. Hole Sizes: .159 & .190"Ø. With one of each hole size plugged. Material: 2024-T3 Aluminum. Plugged holes contain a BACR15BA6A8C Rivet in the .056" plate. Apply BMS 545 sealant between each layer Includes Test Repo | 1 | |
| AFNDT-3421/7075T6 | 12 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (5/32, 3/16, 7/32,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), WITH A .020"x.020" and .030"x.030" CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3422 | Titanium(6AL-4V) Multi-hole reference standard with certificate. Contains 20 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 1.0" inch. Each hole contains two EDM c | 1 | |
| AFNDT-3423 | Eddy Current Reference Standard. Dimensions: 4" x 0.25" x 1" Material: Aluminum 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3425 | Custom Eddy Current Multi-Hole Reference Standard. Hole Diameters: 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm, 9.5 mm, 10.0 mm, 10.5mm, 11.0 mm, 11.5 mm, 12.0 mm, 12.5 mm, 13.0 mm, 13.5 mm, 14.0 mm. Two (2) EDM notches per hole.Material: Aluminium 7075-T76. | 1 | |
| AFNDT-3426 | Custom Eddy Current Hole Standard. Hole Diameters: 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm, 9.5 mm, 10.0 mm, 10.5 mm, 11.0 mm, 11.5 mm, 12.0 mm. Material: Aluminium 7050-T74. Includes Test Report and Certific | 1 | |
| AFNDT-3427AL | 1/8" HOLE STANDARD IN 7075-T6 with .020" x .020" x .005" CORNER EDM NOTCH. MATERIAL SIZE 2.0" x 2.0" x .375". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3430 | CUSTOM HOLE STANDARD, 2024-T3 or 7075-T6 ALUMINUM 1/2" PLATE. Holes diameters: 5/32", 6/32", 13/64", 8/32", 17/64". 1st row - holes without defects. 2nd row - holes with Corner notch - 0.5 mm. 3d row - holes with Full length thru notch - 0.5 mm depth. 4th | 1 | |
| AFNDT-3430-1 | CUSTOM METRIC HOLE STANDARD, 2024-T3 or 7075-T6 ALUMINUM 1/2" PLATE. Holes diameters: 4 mm, 5 mm, 6 mm, 7 mm.. 1st row - holes without defects. 2nd row - holes with Corner notch - 0.5 mm. 3d row - holes with Full length thru notch - 0.5 mm depth. 4th row | 1 | |
| AFNDT-3431/718 | 12 HOLE REFERENCE STANDARD 718 INCONEL. HOLE SIZES: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8" .020" x .005" +/-.001" THROUGH EDM NOTCH ON EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3440/304 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.254mm), .020"(0.508mm), .050" (1.27mm) (.004"W +/- .001). Material: Non-Magnetic 304 Stainless Steel. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3440/6AL-4V | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.254mm), .020"(0.508mm), .050" (1.27mm) (.004"W +/- .001). Material: 6AL-4V Titanium. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3442AL | Aluminum Multi-hole reference standard. Material: 7075-T6 Aluminum. Contains 10 hole sizes; 1/8 inch (3.175mm), 3/16 inch (4.74mm),1/4 inch (6.35mm), 5/16 inch (7.92mm), 3/8 inch (9.52mm), 7/16 inch (11.09mm), 1/2 inch (12.7mm), 9/16 inch (14.27mm), 5/8 i | 1 | |
| AFNDT-3446 | SURFACE STANDARD MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. EDM SLOT (0.5mm(.020") DEEP) x (0.13mm(.05") WIDE) +/-.03mm. BLOCK SIZE 3.50" X 1.0" X .50 Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3447/4340 | 5 STEP THICKNESS STANDARD. STEP SIZES: .010", .020", .030", .040", .050", +/-.001". MATERIAL: 4340 STEEL. PAD SIZE .75" X .75" WITH HOLDER. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3456AL | CUSTOM 19 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737 PT 6 51-00-00 Procedure16 Figure 3 , 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Total of 19 Hole Sizes: .128", .159", .189", .2 | 1 | |
| AFNDT-3457 | EDDY CURRENT SURFACE REFERENCE STANDARD. Cadmium plated on one side to AMS-QQ-P-416-f Type 1, Class 2. 3 EDM FLAWS ON BOTH SIDES. ONE SIDE UNPLATED(BARE). NOTCH DEPTHS : .008", .020", .040". NOTCH WIDTH: (.004"W +/- .002). MATERIAL: 4340 STEEL. SIZE: 1. | 1 | |
| AFNDT-3459AL | Calibration standard, Aluminium alloy 2024-T3, rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1. | 1 | |
| AFNDT-3459TI | Calibration standard, 6Al-4v Titanium , rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1.1/8 in | 1 | |
| AFNDT-3460AL | Custom Eddy Current Bolt Hole Calibration Standard. Total of 35 Hole Sizes: Diameters 3.0mm, 3.2mm, 4.0mm, 4.2mm, 4.6mm, 5.0mm, 5.4mm, 5.8mm, 6.2mm, 6.6mm, 7.0mm, 7.4mm, 7.8mm, 8.0mm, 8.2mm, 8.6mm, 9.0mm, 9.4mm, 9.8mm, 10.2mm, 10.6mm, 11.0mm, 11.4mm, 11. | 1 | |
| AFNDT-3461/C110 | 4 STEP THICKNESS STANDARD. STEP SIZES: .050", .100", .150", .250". +/-.001". PAD SIZE .75" x .75". MATERIAL: C-110 Copper. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3560B | CORROSION REFERENCE STANDARD | 1 | |
| AFNDT-3669-1043 | BOEING COUNTERSINK REFERENCE STANDARD 737 PT6 51-00-00 PROCEDURE 19, 0.375” DIAMETER 100° COUNTERSINK HOLE. MATERIAL: 43404340M STEEL. SIZE: 2.0" X .375" THICK( ROUNDSQUARE. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AFNDT-AL-6061 | CUSTOM REFERENCES STANDARD PER AMS4083 | 1 | |
| AFNDT-CRJ200/CRS | SURFACE REFERENCE STANDARD, ALUMINUM, .005W x .008", .020", .040" EDM NOTCH DEPTHS . MATERIAL 2024-T3 AL...CRJ200 PART1 51-20-06 PG.9 | 1 | |
| AFNDT-ECRC82040 | Eddy Current Crack Standard Magnesium AZ-31 | 1 | |
| AFNDT-ROMPAS-7075 | REFERENCE STANDARD | 1 | |
| AFNDT-SRS-4A | SURFACE STANDARD ALUMINUM(2024-T351) 1 EDM SLOT (0.040 DEEP) | 1 | |
| AFNDT-SRS-4S | SURFACE STANDARD STEEL 4340 1 EDM SLOT (0.40 DEEP) | 1 | |
| AFNDT-SRS-4T | SURFACE STANDARD TITANIUM 1 EDM SLOT (0.40 DEEP) | 1 | |
| AFNDT-SS304 | CUSTOM REFERENCES STANDARD PER AMSS5564 | 1 | |
| AFNDT-VL769-1A | TITANIUM VERTICAL(INBOARD LUG) ULTRASONIC REFERENCE STANDARD(.800"THICK, 3.56" OUTSIDE RADIUS WITH A 1.312" BORE DIAMETER. COPPER BERYLLIUM NON FLANGED BUSHING WITH A 1.128 BORE DIA. ( 2 EACH .100" x .100" CORNER NOTCHES) | 1 | |
| AFNDT-VL769-2A | TITANIUM VERTICAL(INBOARD LUG) ULTRASONIC REFERENCE STANDARD(1.500" THICK, 3.56" OUTSIDE RADIUS WITH A 1.312" BORE DIAMETER. COPPER BERYLLIUM NON FLANGED BUSHING WITH A 1.128 BORE DIA. ( 2 EACH .100" x .100" CORNER NOTCHES) | 1 | |
| AFNDT1016-12S-2024 | CUSTOM 12 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .188", .219", .250",.282", 313", .344", .375" .438" .500",.563", . | 1 | |
| AFNDT1016-12S-7075 | CUSTOM 12 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .188", .219", .250",.282", 313", .344", .375" .438" .500",.563", .6 | 1 | |
| AFNDT2054 | 10 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. Hole Sizes: 1/8”, 3/16”, ¼”, 5/16”, 3/8”, 7/16”, ½”, 9/16”, 5/8”. DEPTH: 0.5 +/- 0.05mm (0.020 +/- 0.002in) WIDTH: 0.1 +/- 0.05mm (0.004 +/- 0.002 in. Includes Test Report and Certificate of Conformance. | 1 | |
| AFP-1012 | 10 MHZ .125" dia focused Straight shaft pencil transducer with a .080" Replaceable tip. Standard microdot connector | 1 | |
| AFP-1012/90 | 10 MHZ 90° .125"Ø diameter focused pencil transducer with a .060" Replaceable tip. Standard microdot connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFP-1512 | 15 MHZ .125" dia focused Straight shaft pencil transducer with a .080" Replaceable tip. Standard microdot connector | 1 | |
| AFP-1512/90 | 15 MHZ 90° SHAFT .125" dia focused pencil transducer with a .060" Replaceable tip. Standard microdot connector | 1 | |
| AFP-7512 | 7.5MHZ .125" dia. High Resolution focused Straight shaft pencil transducer with a .080" Replaceable tip. Standard microdot connector. ( K-PEN style ) | 1 | |
| AFP-7512/90 | 7.5MHZ 90° angle head. High Resolution .125" dia focused pencil transducer with a .080" Replaceable tip. Standard microdot connector. K-PEN Style | 1 | |
| AFS-0506 | 5MHZ 51° SHEAR WAVE IN ALUMINUM. CASE SIZE .50" W x .80"L x .37"H, REFERENCE STANDARD NDT624 | 1 | |
| AFS-0507 | 5MHZ 32° SHEARWAVE IN ALUMINUM. CASE SIZE .50"X.80"L. HEIGHT TAPERS FROM .20"H FRONT TO .32" H BACK. REFERENCE STANDARD IS NDT624 | 1 | |
| AFS-0524 | 5 MHz shear wave transducer .25" x .25" square element. 1.025 radius top mount connector. used with NDT3238 ref. standard | 1 | |
| AFS-0539 | Custom 5MHz 45 degree shearweave ring transducer which features both right and left scanning directions. Ref. Standard NDT796 | 1 | |
| AFS-0570-1L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR ( .328" )DIAMETER FASTENER HOLE'S (0.430" ) STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-1R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .328" )DIAMETER FASTENER HOLE'S (0.430" ) STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-2L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.438" & 0.500") DIAMETER FASTENER HOLE'S (0.430" & 0.590") STEPS OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-2R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.438" & 0.500") DIAMETER FASTENER HOLE'S (0.430" & 0.590") STEPS OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-3L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.642") DIAMETER FASTENER HOLE IN (0.570") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-3R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.642") DIAMETER FASTENER HOLE IN (0.570") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-4L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.438") DIAMETER FASTENER HOLE (0.710") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-4R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.438") DIAMETER FASTENER HOLE (0.710") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-5L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.625") DIAMETER FASTENER HOLE IN (0.850") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-5R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.625") DIAMETER FASTENER HOLE IN (0.850") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0572-1L | CUSTOM 45° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.340" ) STEP OF REFERENCE STANDARD NDT6091. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-1R | CUSTOM 45° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.340" ) STEP OF REFERENCE STANDARD NDT6091. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-2L | CUSTOM 50° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.240" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-2R | CUSTOM 50° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.240" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-3L | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-3R | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-4L | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .412" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-4R | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .412" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0577-1 | CUSTOM 5MHz 30° .187" X .187" BACK SHOOTING ANGLE BEAM TRANSDUCER FOR THE 767 CF6-80C2 ENGINE STRUTS. USED WITH REFERENCE STANDARD 767 NDT674 54-50-06 PART 4 FIGURE 3. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0577-2 | CUSTOM 5MHz, 25° .187" X .187" BACK SHOOTING ANGLE BEAM TRANSDUCER FOR THE 767 CF6-80A/A2 ENGINE STRUTS. USED WITH REFERENCE STANDARD 767 NDT674 54-50-06 PART 4 FIGURE 3. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1032SS | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 45 degree shearwave in Steel, Side Microdot Connector. | 1 | |
| AFS-1033SS | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 60 degree shearwave in Steel, Side Microdot Connector. | 1 | |
| AFS-1034SS | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 70 degree shearwave in Steel, Side Microdot Connector. | 1 | |
| AFS-1160 | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 45 degree shearwave in Aluminum, Right Angle Microdot Connector. | 1 | |
| AFS-1161 | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 60 degree shearwave in Aluminum, Right Angle Microdot Connector. | 1 | |
| AFS-1175 | 70°. ANGLE BEAM TRANSDUCER in ALUMINUM, SIDE MOUNT MICRODOT CONNECTOR, .187" x .187" ELEMENT. CASE SIZE: .67'L x .26"W x .33"H. Includes Test Report and Certificate of Conformance. Reference: B767 Part 4 53-50-05. Standard Part number NDT679 | 1 | |
| AFS-1175T | 70°. ANGLE BEAM TRANSDUCER in ALUMINUM, .187" x .187" ELEMENT, TOP MOUNTED MICRODOT CONNECTOR. CASE SIZE: .67'L x .26"W x .33"H. Includes Test Report and Certificate of Conformance. Reference: B767 Part 4 53-50-05. Standard Part number NDT679 | 1 | |
| AFS-1202L | STANDARD TOOL - BUCKING BAR | 1 | |
| AFS-1225S | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 60 degree shearwave in Aluminum, Right Angle Microdot Connector. | 1 | |
| AFS-1225T | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 60 degree shearwave in Aluminum, Top Microdot Connector. Case Size: .375"L x .425"H x .325"W | 1 | |
| AFS-1346 | CUSTOM 2 ELEMENT RING TRANSDUCER FOR BORE HOLE INSPECTION WITH BOEING REFERENCE STANDARD 55-10-13 PAGE 9 FIGURE 2. TWO MICRODOT CONNECTORS "A" and "B" | 1 | |
| AFS-1394 | CARGOLUX CUSTOM 5MHz .187", 40° IN ALUMINUM SHEAR WAVE TRANSDUCER WITH A 1.00" RADIUS FOR THE BOEING REFERENCE STANDARD LUG 1B7- FITTING-SEQUENCE CARRIAGE ATTACHMENT INBOARD TRAILING EDGE FLAP. CASE SIZE: .500"L x .270"W x .350". Includes Test Report... | 1 | |
| AFS-2034SS | Sub Miniature Integral Angle Beam Transducers, Standard Series, 2.25 MHz, 0.120 inch x 0.250 inch; 70 degree shear in Steel, Right microdot Connector | 1 | |
| AFS-545AT | REF STANDARD AND PROBE | 1 | |
| AFS-5825 | Custom 5MHz 22° shear wave transducer .375" element. 1.90"(51mm) radius. Case Size: .75"L x .50"W x .25"H. Used with reference standard NDT3195. | 1 | |
| AFS-5826 | Custpm 5MHz 31° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3196. | 1 | |
| AFS-5827 | Custpm 5MHz 33° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3197. | 1 | |
| AFS-5828 | Custpm 5MHz 26° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3197. | 1 | |
| AGE - 04707-401 | REFERENCE STANDARD, NDI | 2 | |
| AGE- 04362-401 | REFERENCE STANDARD, NDI | 1 | |
| AGE-00931-401 | KIT-REFERENCE STANDARD,NDI | 1 | |
| AGE-02001-401 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, ALUMINUM ALLOY | 1 | |
| AGE-02321-401 | Embraer 170 Reference Standard. Material: 2024-T351 Clad. Top skin = 0.040, Lower skin = 0.080. Rivet - MS2047AD-5. Includes Test Report and Certificate of Conformance. | 1 | |
| AGE-04329-40 | REFERENCE STANDARD, NDI | 1 | |
| AGE-04329-401 | SET- REFERENCE STANDARD, NDI | 1 | |
| AGE-04329-401 | STANDARDS SET - REFERENCE | 1 | |
| AGE-04362-401 | SET- REFERENCE STANDARD, NDI | 1 | |
| AGE-04383-001 | REFERENCE STANDARD, NDI | 1 | |
| AGE-04383-003 | REFERENCE STANDARD, NDI | 1 | |
| AGE-04707- 401 | NDT REFERENCE STANDARD | 2 | |
| AGE-04707-401 | SET- REFERENCE STANDARD, NDI | 2 | |
| AGE-04707-401 | SET - REFERENCE STANDARD NDI | 2 | |
| AGE-04900- 401 | REFERENCE STANDARD | 4 | |
| AGE-04900-40 | REFERENCE STANDARD, NDI | 1 | |
| AGE-04900-401 | SET- REFERENCE STANDARD, NDI | 4 | |
| AGE-04900-401 | REFERENCE STANDARD, NDI | 4 | |
| AGE-04982-401 | NDT STANDARD | 1 | |
| AGE-05546-401 | REFERENCE STANDARD FOR BAGGAGE DOOR CUTOUT, NDI | 2 | |
| AGE-05697- 401 | REFERENCE STANDARD, NDI | 3 | |
| AGE-05697-401 | REFERENCE STANDARD, NDI | 3 | |
| AGE-05698 | REFERENCE STANDARD HORIZONTAL STABILIZER | 1 | |
| AGE-05698-401 | REFERENCE STANDARD HORIZONTAL STABILIZER | 1 | |
| AGE-05698-403 | REFERENCE STANDARD HORIZONTAL STABILIZER | 1 | |
| AGE-05698-405 | REFERENCE STANDARD HORIZONTAL STABILIZER | 1 | |
| AGE-05700 | BAG REFERENCE STANDARD - FABRIC | 1 | |
| AGE-05700-401 | REFERENCE STANDARD BAG-FABRIC | 1 | |
| AGE04362-401 | SET- REFERENCE STANDARD, NDI | 1 | |
| AGE04900-401 | EMBRAER 145 NDT CALIBRATION STANDARD PART | 4 | |
| AH-360-STD-S8 | DESOUTTER AH-360-STD-S8 QUICK RELEASE STANDARD HEAD 360DG 5/16-28 UNF | 1 | |
| AH-90-STD-S8 | DESOUTTER AH-90-STD-S8 QUICK RELEASE STANDARD HEAD 90DG 5/16-28 UNF | 1 | |
| AH-90-STD-T8 | DESOUTTER AH-90-STD-T8 STANDARD 90 DEGREE ANGLE HEAD | QUICK RELEASE | 3/16" COLLET SPINDLE | 1 | |
| AH1100/11A-AF1 | ULTRA STABLE CAPACITANCE STANDARD | 1 | |
| AH135-600 | BLADE COVERS (STANDARD DESIGN) (set of 4) | 1 | |
| AHS29-1A-0 | (Aluminum Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/... | 1 | |
| AHS29-1A-2 | (Aluminum Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/... | 1 | |
| AHS29-1S-0 | Carbon Steel(4340) Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 2... | 1 | |
| AHS29-1SS-0 | (304 Stainless Steel Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16",... | 1 | |
| AHS29-1SS-1 | (Stainless Steel Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/… | 1 | |
| AHS29-1T-0 | Titanium(6AL-4V) Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/... | 1 | |
| AHS29-C2-A1 | CUSTOM 29 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM WITH 0.015" THRU EDM NOTCH AND 0.030X0.030 CORNER NOTCH. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AHS29-C30304 | 304 Stainless Steel Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/ | 1 | |
| AHS29-C30INC | Inconel 718 Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8 | 1 | |
| AHS29-C30TI | 6AL-4V Titanium Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", | 1 | |
| AL 29-32 | Surface Standard, .008"-.020"-.040" deep notches, 2024-T3 | 6 | |
| AL 35-45 | Surface Standard, .008"-.020"-.040" deep notches, 2024-T6 | 8 | |
| AL-BOEING REF STD PART6 51-00-0 | AL REF STANDARD FOR BOEING NDT PART 6 51-00-00 PROCEDURE 16 | 1 | |
| AL028-712-1197 | STANDARD-CONDUCTIVITY | 1 | |
| AL034-712-1198 | STANDARD-CONDUCTIVITY | 1 | |
| AL043-712-1220 | STANDARD-CONDUCTIVITY | 1 | |
| AL29-32 | Surface Standard, .008", .020", .040" w/ special spacing, 2024T3 Aluminum | 6 | |
| AL35-45 | Surface Standard, .008", .020", .040" w/ special spacing, 2024T6 Aluminum | 8 | |
| AM2563 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (AGSE) | 3 | |
| AM27118 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (AGSE) | 1 | |
| AMB12V4012 | BEARING (STANDARD) | 1 | |
| AMI 2600 | RVSM STANDARD INTERFACE CASE | 1 | |
| AMP-39-B-53-10-00-00A-31BA-K | REFERENCE STANDARD PER AW139 IETP 33rd Issue. Material: AISI 301-1/4 HARD STEEL, 7075 AL | 1 | |
| AMS2630C Custom | Custom Reference Standard Per SAE AMS2630C. material: Titanium Alloy, Ti6Al4V per AMS-4928R Annealed. Includes 2 EDM Flaws per customer supplied Drawing. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AN-111 | STANDARD PORTABLE CYLINDER HONE (SUNNEN) RANGE:2.5"-7" | 1 | |
| AN2551 | AERONAUTICAL STANDARD AN2551 RED PLASTIC 12-VOLT/24-VOLT 3-PIN NATO EXTERNAL POWER CONNECTOR | 2 | |
| AN670-55-31-102 | CALIBRATION REFERENCE STANDARD (CRS), MADE OF ALUMINUM WITH MULTIPLE LAYERS CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| AN670-55-31-110 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| AN815-10D | UNION, HOSE TO VALVE DISCHARGE PORT AN815-10D (AS5174D1010, SAE: SOCIETY OF AUTOMOTIVE ENGINEERS, AEROSPACE STANDARD) | 1 | |
| ANDT 1049 | REFERENCE STANDARD | 3 | |
| ANDT 1051 | REFERENCE STANDARD | 4 | |
| ANDT 1052 | REF. STANDARD | 3 | |
| ANDT 1053 | REFERENCE STANDARD | 5 | |
| ANDT 1056 | BOEING STANDARD, 737 PT6 53-30-00 PROCEDURE 5 PG 5 AND 11 FG 1 | 4 | |
| ANDT 1079 | Reference Standard | 4 | |
| ANDT 1080 | REFERENCE STANDARD | 2 | |
| ANDT 1081 | REFERENCE STANDARD | 2 | |
| ANDT 1082 | Reference Standard | 3 | |
| ANDT 3004 | Reference standard ANDT 3004 | 3 | |
| ANDT-1049 | Reference Standard ANDT-1049 | 3 | |
| ANDT-1050 | Reference Standard ANDT-1050 | 3 | |
| ANDT-1051 | Reference Standard ANDT-1051 | 4 | |
| ANDT-1052 | Reference Standard ANDT-1052 | 3 | |
| ANDT-1053 | Reference Standard ANDT-1053 | 5 | |
| ANDT-1054 | Reference Standard ANDT-1054 | 3 | |
| ANDT-1055 | Reference Standard ANDT-1055 | 3 | |
| ANDT-1056 | Reference Standard ANDT-1056 | 4 | |
| ANDT-1057 | Reference Standard ANDT-1057 | 3 | |
| ANDT-1070/4330 | 14 HOLE CALIBRATION STANDARD. Material: 4330 Steel. Hole Sizes: 5/32, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 3/8, 1/2. EDM Flaws: .020" x .020" x .005" +/- .001" and .030" x .030" x .005" Wide +/- .001" corner notches. ... | 1 | |
| ANDT-1070/TI | 14 HOLE CALIBRATION STANDARD. Material: 6AL-4V Titanium. Hole Sizes: 5/32, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 3/8, 1/2. 28 Total EDM Flaws: .020" x .020" x .005" +/- .001" and .030" x .030" x .005" Wide +/- .001" co... | 1 | |
| ANDT-1079 | REFERENCE STANDARD | 4 | |
| ANDT-3004 | Reference Standard | 3 | |
| ANDT-3006 | Reference Standard | 3 | |
| ANDT-3016-B | Reference Standard | 4 | |
| ANDT-3019 | Reference Standard ANDT-3019 | 3 | |
| ANDT-4126 | Reference Standard | 2 | |
| ANDT1015 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 3 | |
| ANDT1028 | Boeing Standard, 707 PT6 53-10-07 FIG18: PG143 SHEET9, ALODINED RIVETS ONLY (end in C) | 1 | |
| ANDT1029A | Boeing Standard 707 53-30-07 PT6 PG102 | 1 | |
| ANDT1029B | Boeing Standard 707 53-30-07 PT6 PG 103 | 1 | |
| ANDT1049 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 3 | |
| ANDT1049/.036 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5, .036 SKIN. Includes Test Report and Certificate of Conformance. | 1 | |
| ANDT1050 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 3 | |
| ANDT1051 | REFERENCE STANDARD.. | 4 | |
| ANDT1052 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 3 | |
| ANDT1053 | REFERENCE STANDARD | 5 | |
| ANDT1054 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 3 | |
| ANDT1055 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 3 | |
| ANDT1056 | REFERENCE STANDARD | 4 | |
| ANDT1057 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 3 | |
| ANDT1077 | REFERENCE STANDARD | 4 | |
| ANDT1079 | Boeing Standard, 737 PT6 53-30-00: PG 7-8 FIG 2 Procedure 7 | 4 | |
| ANDT1080 | Boeing Standard, 737 PT6 53-30-00: PG 7-8 FIG 2 Procedure 7 | 2 | |
| ANDT1081 | Boeing Standard, 737 PT6 53-30-00: PG 7-8 FIG 2 Procedure 7 | 2 | |
| ANDT1082 | Boeing Standard, 737 PT6 53-30-00: PG 7-8 FIG 2 Procedure 7 | 3 | |
| ANDT2007 | Boeing Standard, PT6 53-10-27 PG456 Fig 48 Sheet8 Detail IV | 1 | |
| ANDT3004 | Boeing Standard, 737 PT6 53-30-12:PG7 FIG2 | 3 | |
| ANDT3006 | Boeing Standard, 737 PT6 53-30-14:PG7 FIG2 | 3 | |
| ANDT3016 | REFERENCE STANDARDS | 1 | |
| ANDT3016-B | Boeing Reference Standard, PT6 53-10-54 | 4 | |
| ANDT3016B | BOEING REFERENCE STANDARD 737 PT6 53-10-54 PG 7 FG 2 | 4 | |
| ANDT3019 | BOEING REFERENCE STANDARD 737 Part 6 53-30-16 Page 5 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT378 | REFERENCE STANDARD B737 | 1 | |
| ANDT388 | Boeing Standard, 737 PT6 53-10-49:PG11 FIG4 | 1 | |
| ANDT390A | Boeing Standard, 737 PT6 53-10-46:PG10 FIG4 | 1 | |
| ANDT390B | Boeing Standard, 737 PT6 53-10-46:PG11 FIG5 | 1 | |
| ANDT4125 | Boeing Standard w/ certs | 1 | |
| ANDT4126 | Boeing Reference Standard, 747 PT6 53-30-00:PG5 FIG6 DETAIL I | 2 | |
| ANDT4218 | Boeing Standard 747 53-10-51 PT6 PG6 | 1 | |
| ANDT4223 | Boeing Standard 747 53-10-33 PT6 PG 8 | 1 | |
| ANET429-4 | "4 CHANNEL STANDARD ETHERNET TO ARINC429 INTERFACE | 1 | |
| AP-763 ECI | Flat Standard with Radius Notch, Cast Aluminum, per ABS PT3 32-42-05 PG15:PROC1 FIG11 | 1 | |
| APB-NDT001 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-02 Page 6 Frigure 2. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes | 1 | |
| APB-NDT003 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-02 Page 9-10 Figure 5. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Include | 1 | |
| APB-NDT004 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-01 Page 5-6 Figure 2. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Include | 1 | |
| APB-NDT005 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-02 Page 13-14. Figure 7. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Inclu | 1 | |
| APB-NDT006 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-53 Page 5-6 Figure 2. Material: 7075-T7 (40-44% IACS), 2324-T3 (29.5-33.5% IACS), and 2224-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Inclu | 2 | |
| APB-NDT011A | REFERENCE STANDARD B767 | 1 | |
| APB-NDT011B | REFERENCE STANDARD B767 | 1 | |
| APB-NDT011C | REFERENCE STANDARD B767 | 1 | |
| APB-NDT011D | REFERENCE STANDARD B767 | 1 | |
| APB-NDT012 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 4 57-20-03 Page 8 Figure 3. Material: 2224-T3 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT013 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 4 57-20-03 Page 10 Figure 4. Material: 2224-T3 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT014 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 4 57-20-03 Page 12 Figure 5. Material: 2224-T3 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT015 | BOEING AVIATION PARTNERS REFERENCE STANDARD 767 Part 6 57-20-09 Page 21-22 Figure 10. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Ce | 1 | |
| APB-NDT016 | BOEING AVIATION PARTNERS REFERENCE STANDARD 767 Part 6 57-50-09 Page 24-25. Figure 12 Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Ce | 1 | |
| APB-NDT3301 | REFERENCE STANDARD | 1 | |
| APB-NDT3302 | REFERENCE STANDARD | 1 | |
| APB-NDT3801NG | BOEING REFERENCE STANDARD PT6 737 57-10-205 PAGE 7-8, FIGURE 2, SHEETS 1&2 | 2 | |
| APB-NDT3802NG | BOEING REFERENCE STANDARD PT 6 737 57-10-205 PAGE 11-12, FIGURE 4, SHEETS 1 & 2. | 2 | |
| APB-NDT5201 | Boeing Standard, 757, 57-20-01, PT6, PG23-24 | 2 | |
| APB-NDT5202 | Boeing Standard, 757, 57-20-01, PT6, PG20 | 2 | |
| APB-NDT5203 | Boeing Standard, 757, 57-20-02, PT6, PG7 | 2 | |
| APB-NDT5204 | Boeing Standard, 757, 57-20-02, PT6, PG11 | 2 | |
| APB-NDT5205 | Boeing Standard, 757, 57-20-02, PT6, PG16 | 2 | |
| APB-NDT5206 | Boeing Standard, 757, 57-20-03, PT6, PG8-9 | 2 | |
| APB-NDT5207 | Boeing Standard, 757, 57-20-03, PT6, P11-12 | 2 | |
| APB-NDT5208 | Boeing Standard, 757, 57-20-03, PT6, PG15 | 2 | |
| APB-NDT5209 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 4 57-20-03 Page 9 Figure 2. Material: Airplane Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5301 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 15-16 Figure 6. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5302 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 11-12 Figure 4. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5303 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 7-8 Figure 2. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APEX-STANDARD-OVA-M | APEX-STANDARD-OVA-M;Observer Apex - Standard OVA Annual Maintenance | 1 | |
| APEX-STANDARD-SO | APEX-STANDARD-SO;Observer Apex - Standard - Software Only | 1 | |
| APEX-STANDARD-SO-M | APEX-STANDARD-SO-M;Observer Apex - Standard - Annual Maintenance | 1 | |
| APEX-STANDARD-SO-SUB-1 | APEX-STANDARD-SO-SUB-1;One-Year subscription for APEX Standard Software - 1TB Version | 1 | |
| APEX-STANDARD-SO-SUB-3 | APEX-STANDARD-SO-SUB-3;Three-Year subscription for APEX Standard Software - 1TB Version | 1 | |
| APEX-STD-AWS-3YEAR | APEX-STD-AWS-3YEAR;APEX STANDARD Annual 3-Year Subscription for AWS Cloud | 1 | |
| APEX-STD-AWS-ANNUAL | APEX-STD-AWS-ANNUAL;APEX STANDARD Annual 1-Year Subscription for AWS Cloud | 1 | |
| APEX-STD-AWS-PERPETUAL | APEX-STD-AWS-PERPETUAL;APEX STANDARD Perpetual Subscription for AWS Cloud | 1 | |
| APEX-STD-GCP-3YEAR | APEX-STD-GCP-3YEAR;APEX STANDARD Annual 3-year Subscription for Google Cloud | 1 | |
| APEX-STD-GCP-ANNUAL | APEX-STD-GCP-ANNUAL;APEX STANDARD Annual 1-year Subscription for Google Cloud | 1 | |
| APEX-STD-GCP-PERPETUAL | APEX-STD-GCP-PERPETUAL;APEX STANDARD Perpetual Subscription for Google Cloud | 1 | |
| APEX-STD-LIC-3YEAR | APEX-STD-LIC-3YEAR;APEX STANDARD Annual 3-year Subscription for Private Cloud | 1 | |
| APEX-STD-LIC-ANNUAL | APEX-STD-LIC-ANNUAL;APEX STANDARD Annual 1-year Subscription for Private Cloud | 1 | |
| APEX-STD-LIC-PERPETUAL | APEX-STD-LIC-PERPETUAL;APEX STANDARD Perpetual Subscription for Private Cloud | 1 | |
| APEX-STD-MACS-3YEAR | APEX-STD-MACS-3YEAR;APEX STANDARD Annual 3-year Subscription for Azure Cloud | 1 | |
| APEX-STD-MACS-ANNUAL | APEX-STD-MACS-ANNUAL;APEX STANDARD Annual 1-year Subscription for Azure Cloud | 1 | |
| APEX-STD-MACS-PERPETUAL | APEX-STD-MACS-PERPETUAL;APEX STANDARD Perpetual Subscription for Azure Cloud | 1 | |
| APM452ID-A | WINCH STRAP WITH HOOK (STANDARD LENGTH158 ”) | 1 | |
| AR000200 | SR1-MF STANDARD HAND-ROTOR, 10 KHZ - 500 KHZ | 1 | |
| AR000200 SR1 | ROTOR UNIT - STANDARD | 1 | |
| AR000200 SR1-MF | UNIT ROTOR - STANDARD | 1 | |
| ARINC 615 | STANDARD PORTABLE DATA LOADER | 1 | |
| ARP | C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 NUT P/N: KFN542-3) 6 PLACES. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| ARP-.385/.720 | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-5KHz.385"Ø ID .720"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. FOR REFERENCE STANDARD APB-3302. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.75-1.25/300Hz | REFLECTION RING PROBE, 1.25"OD .75" ID(19.6mm) TRIAX FISHER CONNECTOR 300HZ-1KHZ. REFERENCE STANDARD NDT3176-X 737 PT 6 57-10-59, 737 PART 6 57-10-53 NDT3168. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.85/1.40-200Hz | LOW FREQUENCY REFLECTION RING PROBE .85" I.D. 1.40" O.D. TRIAX CONNECTOR 100Hz-500Hz. REFERENCE STANDARD NDT3176-X 737 PT 6 57-10-59. Includes test report and Certificate of Conformance. | 1 | |
| ARP-1.2/100H-7 | LOW FREQUENCY REFLECTION RING PROBE 1.2" OD, .605" ID, 50Hz-3KHz TRIAX FISHER CONNECTOR. 737 PART 6 57-10-58, pg.2. and 737 PART 6 57-10-54, pg.2 USED WITH NDT3153-X AND 3167-X SERIES REFERENCE STANDARDS. Includes Test Report and Certificate of ... | 1 | |
| ARP-1.25-.75-300H | REFLECTION RING PROBE TRIAX FISHER CONNECTOR, 1.25"OD .75" ID(19.6mm) 300HZ-1KHZ. 737 PART 6 57-10-53, pg.2, USED WITH REFERENCE STANDARD NDT3168 AND NDT3176-X. Includes test report and Certificate of Conformance... | 1 | |
| ARP-1.40/.85-200Hz | LOW FREQUENCY REFLECTION RING PROBE .85" I.D. 1.40" O.D. TRIAX FISCHER CONNECTOR 100Hz-500Hz. REFERENCE STANDARD NDT3176-X 737 PT 6 57-10-59. Includes test report and Certificate of Conformance. | 1 | |
| ARP5606 | REFERENCE STANDARD | 1 | |
| ARS-0812S | Surface reference standard, 17-4PH Steel, with EDM notch depths of 0.008", 0.010" and 0.020" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 inc | 1 | |
| ARS-0824-7050 | Surface reference standard, 7050-T7 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX | 1 | |
| ARS-0824-7050T74 | Surface reference standard, 7050-T74 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX | 1 | |
| ARS-0824-7075T6 | Surface reference standard, 7075-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| ARS-0824-7075T7 | Surface reference standard, 7075-T7 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824-7075T73 | Surface reference standard, 7075-T73 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| ARS-0824/2024-T3 | Surface reference standard, 2024-T3 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824/2024-T6 | Surface reference standard, 2024-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| ARS-0824/2024T6 | Surface reference standard, 2024-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| ARS-0824/4330 | Surface reference standard, 4330 Steel, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 inches | 1 | |
| ARS-0824/6061T6 | Surface reference standard, 6061-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824/7475-T7 | Surface reference standard, 7475-T7 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824A | Surface reference standard, 7075-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824I | Surface reference standard, Inconel 718, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX | 1 | |
| ARS-0824M | Surface reference standard, Magnesium, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX | 1 | |
| ARS-0824S | Surface reference standard, 4340 Steel, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 inc... | 1 | |
| ARS-0824SS | Surface reference standard, 304 Stainless steel, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM NOTCHES .005" W +/-.001" | 1 | |
| ARS-0824SS/316 | Surface reference standard, 316 Stainless steel, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM NOTCHES .005" W +/-.001" | 1 | |
| ARS-0824T | Surface reference standard, 6AL-4v Titanium, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.2... | 1 | |
| ARS-1012HCS | 12 HOLE REFERENCE STANDARD 4130 OR 4340 CARBON STEEL WITH 0.020" x 0.020" and 0.030" x 0.030" CORNER EDM NOTCH. HOLE SIZES: 1/8, 5/32, 3/16, 13/64, 7/32, 5/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64. Includes Test Report and Certificate of Conformance. | 1 | |
| ARS-1012HSA | 12 HOLE REFERENCE STANDARD 7075-T6 WITH 0.020" x 0.020" and 0.030" x 0.030" CORNER EDM NOTCH. HOLE SIZES: 1/8, 5/32, 3/16, 13/64, 7/32, 5/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64. Includes Test Report and Certificate of Conformance. | 1 | |
| ARS-123/TI | EDDY CURRENT SURFACE REFERENCE STANDARD. MATERIAL: TI-6AL-6V-2SN. SIZE: 2.0" LONG x 1.0" WIDE. EDM NOTCH .040" DEEP +/- .002" x .005" WIDE +/- .001". Includes Test Report and Certificate of Conformance. | 1 | |
| ARS-1S | Surface reference standard, 4340 or 4130 steel, with EDM notch depth of 0.010" x .005" wide Reference standard overall dImensions 1.0" X 3.0" X 0.25" inches .007" W MAX. Includes Certification traceable to NIST. | 1 | |
| ARTEX 8807 | ARTEX FTP (FIELD PROGRAMMING TABLET) STANDARD KIT | 1 | |
| AS5174D1010 | UNION, HOSE TO VALVE DISCHARGE PORT AN815-10D (AS5174D1010, SAE: SOCIETY OF AUTOMOTIVE ENGINEERS, AEROSPACE STANDARD) | 1 | |
| ASDP-.25/7L | DETACHABLE STANDARD REFLECTION SPOT PROBE. 0.25 IN. (6.3MM) DIAMETER. 5kHZ-100KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.25/7L/2-200K | STANDARD REFLECTION SPOT PROBE. 0.25 IN. (6.3MM). 2kZ-200KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.25/L16-1-100K | STANDARD SIDE MOUNT REFLECTION SPOT PROBE WITH A 16 PIN LEMO 6.O FT ATTACHED. 0.25 IN. (6.3MM). 1Khz100KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.25/TF/1-100K | STANDARD SIDE MOUNT REFLECTION SPOT PROBE. 0.25 IN. (6.3MM). 1Kz-100KHz. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.31/7L | STANDARD REFLECTION SPOT PROBE. 0.31 IN. (7.9MM) DIAMETER. 700HZ-80KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.31/TF | STANDARD REFLECTION SPOT PROBE(STRAIGHT). 0.31"Ø (7.9MM) DIAMETER. 1KHz-50KHz. SUPPLIED WITH A TRIAX FISCHER / LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.44/7L | STANDARD REFLECTION SPOT PROBE. 0.44 IN. (11.2MM) DIAMETER. 400HZ-60KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.45/1KHZ | SURFACE SPOT PROBE, STANDARD BRIDGE .45"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 1KHZ -5KHZ. Includes Test Report and Certificate of conformance. | 1 | |
| ASDP-.5/400HZ-30K | SURFACE SPOT PROBE, STANDARD BRIDGE .500"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 400Hz-30KHz. Includes Test Report and Certificate of conformance. 9213548 | 1 | |
| ASDP-.5/7L | STANDARD REFLECTION SPOT PROBE. 0.50 IN. (12.7MM) DIAMETER. 300HZ-40KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.55/500HZ | SURFACE SPOT PROBE, STANDARD BRIDGE .55"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 500Hz-5KHz. Includes Test Report and Certificate of conformance. | 1 | |
| ASDP-.620 | SURFACE PROBE STANDARD BRIDGE .620" DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 300Hz-10KHz. Includes Test Report and Certificate of conformance. Olympus P/N: 9213011 | 1 | |
| ASDP-1.0/300HZ | SURFACE SPOT PROBE, STANDARD BRIDGE 1.0"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 300HZ. Includes Test Report and Certificate of conformance. | 1 | |
| ASRS-123A | REFERENCE STANDARD ALUMINUM .008, .010, .040 | 1 | |
| ASTM D7215-16 RED | STANDARD TEST METHOD FOR CALCULATED FLASH POINT SIMULATED DISTILLATION ANALYSIS OF DISTILLATE FUELS (STANDARD + REDLINE PDF BUNDLE) | 1 | |
| ASTM F 428-7 | GLASS SCRATCH VISUAL COMPARISON STANDARD SET / PLATES | 1 | |
| ASTW-8 | CUSTOM ACRYLIC CALIBRATION STANDARDS, SET OF 8, THICKNESS .921 / .818 / .559 / .504 / .275 / .248 / .157 / .134 | 1 | |
| AT-3132 | REFLECTOR TO FIT STANDARD APERTURE WITH CLAMPS (RAYCHEM) | 2 | |
| AT553WNX | CLECOS COM BORBOLETA MANUAL STANDARD 5/32 | 1 | |
| AT554WNX | CLECOS COM BORBOLETA MANUAL STANDARD 3/16 | 1 | |
| AT555WNX | CLECOS COM BORBOLETA MANUAL STANDARD 1/4 | 1 | |
| AT600-16 | STANDARD ANVIL | 1 | |
| ATBC-ALU 1200 | REFERENCE STANDARDS | 1 | |
| ATBC-ALU 2014A-T6 | REFERENCE STANDARDS | 1 | |
| ATBC-ALU5083 | STANDARD-CONDUCTIVITY AL5083 | 2 | |
| ATBC-ALU6061 | STANDARD-CONDUCTIVITY AL6061-T4 | 2 | |
| ATBC-PBRONZE | STANDARD-CONDUCTIVITY, PHOSPHOR BRONZE | 2 | |
| ATC500-A626 | STANDARD ANVIL ASSEMBLY | 1 | |
| ATI443S1 | MICROSTOP STANDARD TYPE | 1 | |
| ATI520H23 | SLEEVE FOR STANDARD 1-1/2I DIE | 1 | |
| ATI5513WNX | CLECOS COM BORBOLETA MANUAL STANDARD 5/32 | 1 | |
| ATI552M | STANDARD CLECO 1/8 | 1 | |
| ATI554WNX | CLECOS COM BORBOLETA MANUAL STANDARD 3/16 | 2 | |
| ATI612 | BUCKING BARS,STANDARD | 1 | |
| ATI632 | BUCKING BARS,STANDARD | 1 | |
| ATI637 | BUCKING BARS,STANDARD | 2 | |
| ATI658 | BUCKING BARS,STANDARD | 1 | |
| ATI671 | BUCKING BARS,STANDARD | 1 | |
| ATI676 | BUCKING BARS,STANDARD | 1 | |
| ATI678 | BUCKING BARS,STANDARD | 1 | |
| ATI715 | BUCKING BARS,STANDARD | 1 | |
| ATI723 | BUCKING BARS,STANDARD | 1 | |
| ATI736 | BUCKING BARS,STANDARD | 1 | |
| ATI737 | BUCKING BARS,STANDARD | 1 | |
| ATI750K-2 | BUCKING BARS,STANDARD | 1 | |
| ATI751B-21 | BUCKING BARS,STANDARD | 1 | |
| ATI752A-1 | BUCKING BARS,STANDARD | 1 | |
| ATI760B-1 | BUCKING BARS,STANDARD | 1 | |
| ATI760B-10 | BUCKING BARS,STANDARD | 3 | |
| ATI760B-3 | BUCKING BARS,STANDARD | 1 | |
| ATI763 | BUCKING BARS,STANDARD | 1 | |
| ATR42-57-0038 | ALUMINUUM STANDARD REF BLOCK 1,2&3 | 1 | |
| ATR42V100A | ATR 42&72 DIGITAL AIR/HYDRAULIC TOOL KIT (Standard MILH5606) | 5 | |
| AUR-.281SE/2.0WL | CALIBRATION STANDARD | 1 | |
| AUR-.375SE/2.0WL | CALIBRATION STANDARD | 1 | |
| AUR-.437SE/2.0WL | CALIBRATION STANDARD | 1 | |
| AURFBSE-5.5M/40MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 40mm(1.57") WORKING LENGTH 100KHZ-2MHZ. EXPANDABLE PROBE HEAD DIAMETER= 5.5mm(0.2165Ø - APPROXIMATELY 6.91mmØ 0.272"Ø. Includes Test Report and C... | 1 | |
| AURFBSE-6.0M/51MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 51mm(2.0") WORKING LENGTH 100KHz-2MHz. EXPANDABLE PROBE HEAD DIAMETER= 8.0mm(0.236"Ø) - 10.0mmØ(.315"Ø). Includes Test Report and Certificate of Con | 1 | |
| AURFBSE-8.0M/51MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 51mm(2.0") WORKING LENGTH 100KHz-2MHz. EXPANDABLE PROBE HEAD DIAMETER= 8.0mm(0.315"Ø) - 10.0mmØ(.394"Ø). Includes Test Report and Certificate of Con | 1 | |
| AW1020DK | WRENCH SET, AW1020DK, 20/PC, TOOLS, HAND, TYPE, TOOL WRENCH SET, TYPE HEXAGONAL, STANDARD SAE | 3 | |
| AW3D | STANDARD HEX L WRENCH 3/32X | 1 | |
| AWBSG800 | HEX BALL DRIVERS STANDARD | 1 | |
| AWEF9K | SET OF STANDARD HEXAGON | 3 | |
| AZL01980-R00 | STANDARD AVIONICS HANGAR TOOLBOX | 1 | |
| AZL02623-R00 | STANDARD BOLT FOR PN A32266 WITH A THREAD EDM NOTCH | 1 | |
| AZL02626-R00 | STANDARD BOLT FOR PN A35219 WITH SHANK EDM NOTCH | 1 | |
| AZL02629-R00 | STANDARD BOLT FOR PN MS21250-09038 WITH A THREAD EDM NOTCH | 1 | |
| AZL02636-R00 | STANDARD BOLT FOR PN 43-1374 WITH SHANK EDM NOTCH | 1 | |
| B-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| B-2R | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| B-2TM | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| B-300 | TRACTOR - TOW - 25,000 LB DPB - PERKINS T4.236 STANDARD DIESEL ENGINE | 1 | |
| B-500 | TRACTOR - TOW - 40,000 LB DBP - DETROIT DIESEL - STANDARD ENGINE | 1 | |
| B105-000 | BUBBLE COVER, STANDARD MODEL | 1 | |
| B105-005 | BUBBLE COVER, STANDARD MODEL (with Wire Strike) | 1 | |
| B105-800 | TRAVEL COVER, Light Weight Travel Bubble Cover, STANDARD MODEL | 1 | |
| B105-810 | TRAVEL COVER, Light Weight Travel Bubble Cover, STANDARD MODEL (with Wire Strike) | 1 | |
| B14108-601 | O-RING NON STANDARD | 2 | |
| B18-120 | PROPELLOR/SPINNER COVERS, 2 blade Hamilton-Standard (set of 2) | 1 | |
| B18-121 | INSULATED PROPELLOR/SPINNER COVERS, 2 blade Hamilton-Standard (set of 2) | 1 | |
| B1B | BOEING STANDARD | 1 | |
| B47-300 | ROTOR HUB COVER (standard type) | 1 | |
| B60-107 | EXHAUST PLUGS, standard engine (set of 2) | 1 | |
| BA CRS AL 35-45 | Surface Standard, .008"-.020"-.040" deep notches, 2024-T6 | 1 | |
| BA CRS EXBC670-59046 | REFERENCE STANDARD UT | 1 | |
| BACB30US10K47 | STANDARD BOLT | 1 | |
| BACC14AD-04 | ASSEMBLY - CAP, PRESSURE SEAL, FLARELESS TUBE (STANDARD | 1 | |
| BACRS EX605-60037-001 | REFERENCE STANDARD UT | 1 | |
| BACRS EXBC670-59046 | REFERENCE STANDARD UT | 1 | |
| BAHCO317 | BAHCO Standard Duty Hack Saw | 1 | |
| BASE PLATES 717RS2 1/4 | BOEING UT REFERENCES STANDARD | 1 | |
| BASE PLATES 717RS2 1/8 | BOEING UT REFERENCES STANDARD | 1 | |
| BAT-VDG17 | V-DrillGuide® - Drill Straight - Every Time! Standard Model - 17 Fractional Sizes | 1 | |
| BAT3518-A | Nutplate Jig - Double Wing - Standard Spacing - #6 Screw - MADE IN THE USA! | 1 | |
| BAT3518-B | Nutplate Jig - Double Wing - Standard Spacing - #8 Screw - MADE IN THE USA! | 1 | |
| BAT3518-C | Nutplate Jig - Double Wing - Standard Spacing - #10 Screw - MADE IN THE USA! | 1 | |
| BAT3518-D | Nutplate Jig - Double Wing - Standard Spacing - 1/4" Screw - MADE IN THE USA! | 1 | |
| BAT3518-G | Nutplate Jig - Single Wing - Standard Spacing - #6 Screw | 1 | |
| BAT3518-H | Nutplate Jig - Single Wing - Standard Spacing - #8 Screw | 1 | |
| BAT3518-J | Nutplate Jig - Single Wing - Standard Spacing - #10 Screw | 1 | |
| BAT3518-K | Nutplate Jig - Single Wing - Standard Spacing - 1/4" Screw | 1 | |
| BAe3100/53-10-15/14-18SWG | Calibration Standard, BAe 3100 PT6 53-10-15:PG408 FIG2, 14SWG TOP/18SWG BOTTOM | 1 | |
| BAe3100/53-10-15/17-18SWG | Calibration Standard, BAe 3100 PT6 53-10-15:PG408 FIG2, 17SWG TOP/18SWG BOTTOM | 1 | |
| BAe3100/53-10-15/19-18SWG | Calibration Standard, BAe 3100 PT6 53-10-15:PG408 FIG2, 19SWG TOP/18SWG BOTTOM | 1 | |
| BB73-482 | RVSM STANDARD TOOL CASE | 1 | |
| BCM-74-4 | CABLE. STANDARD BNC TO MICRODOT. 4'. RG-174 | 1 | |
| BH7475-T7351 | CALIBRATION STANDARD, BOMBARDIER CHALLENGER 604, 53-21-00 FIG 602. MATERIAL: 7475-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 4 | |
| BH7545-T7351 | STANDARD CALIBRATION | 1 | |
| BHCB-AL | EDDY CURRENT STANDARD | 1 | |
| BHCB-AL1 | EDDY CURRENT STANDARD | 1 | |
| BHS13A | Set, Wrench, L-Shape, Ball Hex, Standard (13 pcs.) (0.050" to 3/8') | 3 | |
| BHS6061-T6/C2 | Bombardier Bolt hole and surface crack reference standard 6061-T6, 15 Holes, .030 Midwall notches top plate, (2) .030 corner notches each hole on the bottom plate. .008, .020, .030 surface notches | 1 | |
| BLP7 | PLIERS, LOCKING, STANDARD GR | 2 | |
| BLP7A | PLIERS, LOCKING, STANDARD GR | 1 | |
| BLPBB1215 | BREAKER BAR, 1/2"DRIVE 15" STANDARD HANDLE (BLUE POINT) | 1 | |
| BLPBB3810 | BREAKER BAR HANDLE,STANDARD HANDLE,3/8” DRIVE, LENGTH 10” | 2 | |
| BLPT1415 | 1/4 DRIVE TORX T15 STANDARD BIT SOCKET BLUE-POINT | 1 | |
| BM-KIT-MIA | BONDMASTER PROBE AND STANDARD KIT FOR MIA INSPECTIONS | 1 | |
| BM-KIT-PC2 | BONDMASTER PROBE AND STANDARD KIT FOR PITCH-CATCH INSPECTIONS | 1 | |
| BM-KIT-RES-A | BONDMASTER PROBE AND STANDARD KIT FOR RESONANCE INSPECTIONS | 1 | |
| BM-KIT-RES-C | BONDMASTER PROBE AND STANDARD KIT FOR RESONANCE INSPECTIONS | 1 | |
| BOEING-194 | Reference Standard | 1 | |
| BOEING-194A | Reference Standard | 1 | |
| BOEING-194B | Reference Standard | 1 | |
| BOER708 | RATCHET COMBINATION WRENCH SET, STANDARD LENGTH,8PCS,SIZE 5/16”-3/4” | 2 | |
| BOERF708A | Set, Wrench, Flex Head Ratcheting Box / Open End, Standard, 12° Offset, (8 pcs.) | 2 | |
| BP20X-OLA | BOP20 Expansion Kit Standard | 1 | |
| BPK-01 | Standard Probe Kit. Type: BPK-01 | 1 | |
| BPRTR936 | DRIVE STANDARD HANDLE QUICK-RELEASE RATCHET 1/4 | 2 | |
| BREAK BAR - 3/8" STANDARD HANDLE | BREAK BAR - 3/8" STANDARD HANDLE | 1 | |
| BREAK BAR 1/4" STANDARD HANDLE | BREAK BAR 1/4" STANDARD HANDLE | 1 | |
| BRSTAND | PORTABLE STANDARD CYLINDER SHARPENER (SUNNEN) RANGE: 2.5"-7" | 1 | |
| BSGDMR6 | "6-BIT RATCHETING STANDARD SCREWDRIVER (BLUE-POINT®) SCREWDRIVER (BLUE-POINT®) | 1 | |
| BST2960-1 | STANDARD TOOLS CLINOMITER | 1 | |
| BUNDO | STANDARD WEIGHT SET 1 GRAM - 10 KGRAM (17 EA) | 1 | |
| BUTTON HEAD CAL STD | BOEING BUTTON HEAD CALIBRATION STANDARD | 1 | |
| BYU-10/12 | REFERENCE STANDARD | 1 | |
| BYU-8/10 | REFERENCE STANDARD | 1 | |
| C-130-OW-016 | CALIBRATION STANDARD BLOCK | 2 | |
| C-130-WR | C-130 Outer Wing Rainbow Fitting Bolt Hole Standard C-130, 2 Layers, 3 HOLES, 3/4", 7/8" and 1.0" with .004" X .030" X .030" EDM Notches in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| C-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 4 | |
| C-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| C-2M | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| C-2MHD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| C-2ML | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| C02683A | PAUT ULTRASONIC CALIBRATION STANDARD, HY-100, NICKELPLATED 3.250'' TALL X 1.250" WIDE X 15.50" LONG UT SCANNING SURFACE PHONOGRAPHIC FINISH TO 125 RA | 1 | |
| C02699A | PAUT ULTRASONIC CALIBRATION STANDARD, HY-100, NICKELPLATED 6.250'' TALL X 1.250" WIDE X 24.00" LONG UT SCANNING SURFACE PHONOGRAPHIC FINISH TO 125 RA | 1 | |
| C12-DEL-3C1N | REPAIR REFERENCE STANDARD GR/EP LAMINATE STEP DELAM DEFECT. ALL BOEING AIRCRAFT MODELS PART 1 51-01-01. Includes C-SCAN Certification and Certificate of Conformance... | 3 | |
| C12-DEL-3C1N | STANDARD SAMPLE REPAIR | 3 | |
| C12-DEL-3C2N | Composite Standard, Boeing All PT 51-01-01, 12ply carbon fiber, (DEL) interply delamanations | 1 | |
| C12-DIS-3C1N | COMPOSITE STANDARD | 3 | |
| C12-DIS-3C1N | STANDARD SAMPLE REPAIR | 3 | |
| C12-DIS-3C2N | COMPOSITE STANDARD | 1 | |
| C12-PCS-3C1N | REFERENCE STANDARDS: | 3 | |
| C12-PCS-3C1N | STANDARD SAMPLE REPAIR | 3 | |
| C12-PCS-3C2N | Composite Standard, Boeing All PT 51-01-01, 12ply carbon fiber, (PCS) potting and core splice | 1 | |
| C12-POT-3C1N | REPAIR REFERENCE STANDARD GR/EP LAMINATE STEP POTTED CORE and CORE DEFECT. ALL BOEING AIRCRAFT MODELS PART 1 51-01-01. Includes C-SCAN Certification and Certificate of Conformance... | 3 | |
| C12-POT-3C1N | STANDARD SAMPLE REPAIR | 3 | |
| C12-POT-3C2N | Composite Standard, Boeing All PT 51-01-01, 12ply carbon fiber, (POT) skin to potting disbonds | 1 | |
| C130-0W-016 | CALIBRATION STANDARD | 2 | |
| C130-300 | CENTER CONSOLE COVER (standard color: Black), NSN: 1680-01-592-8492 | 1 | |
| C130-305 | CENTER CONSOLE COVER (J Models, standard color: Black), NSN 1680-01-590-9530 | 1 | |
| C130-900 | FLIGHT DECK HEATSHIELD SET (standard models), NSN: 1680-66-164-1476 (set of 13) | 1 | |
| C130-CW-012 | C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 + NUT P/N: KFN542-3) 6 PLACES. Includes Test Report and Certificate of Conformance. | 2 | |
| C130-CW-013 | C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 + NUT P/N: KFN542-3) 6 PLACES. Includes Test Report and Certificate of Conformance. | 2 | |
| C130-CW-017 | C-130 CALIBRATION STANDARD | 1 | |
| C130-CWOW-019 | LOCKHEED C-130 CALIBRATION STANDARD LOWER SURFACE PANEL. MATERIAL: 7075-T6 ALUMINUM | 1 | |
| C130-OW-016 | LOCKHEED C-130 CALIBRATION STANDARD FIGURE 9-4 No.1 and No. 4 Truss Mount Upper Lugs. Material: 7075-T6 Aluminum Sulfuric Acid Anodized Per MIL-A-8625 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| C130-OW-017 | C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 NUT P/N: KFN542-3) 6 PLACES. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| C130-OW-020 | CALIBRATION STANDARD | 1 | |
| C130-UT-17-1 | C-130 CALIBRATION STEP STANDARD. MATERIAL:7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| C24-DEL-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | 1 | |
| C24-DIS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | 1 | |
| C24-PCS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | 1 | |
| C24-POT-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | 1 | |
| C32036-5 | CLAMP STANDARD ASSY | 5 | |
| C49003-1 | CRADLE, SUND STANDARD AUXILIARY POWER UNIT | 16 | |
| C500-300 | WING COVERS (Standard model) (set of 2) | 1 | |
| C7091/10.6MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 10.6mm hole standard 6AL-4V Ti | 1 | |
| C845-1032 | WRENCH TYPE UPSETTERS DESCRIPTION: FOR STANDARD | 1 | |
| CA12-1508A | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 7075-T7 ALUMINUM, 54-10-11 PAGE 634A FIG.603 SHEET 21B | 1 | |
| CA12-1683A | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 STEEL, 54-10-11 PAGE 632C FIG.603 SHEET 20C | 1 | |
| CA235-235502 | AIRBUS MILITARY REFERENCE STANDARD 53-30-10 FIG 505, PAGE 508. | 1 | |
| CA71 | STANDARD ACCESSORIES | 3 | |
| CAG6850-7 | STANDARD NOZZLE W/ ORING | 1 | |
| CAM-100-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-101-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-102-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-103-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-110-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-111-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-20-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-21-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-22-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-23-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-30-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-31-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-32-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-33-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-40-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-41-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-42-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-43-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-50-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-51-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-52-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-53-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-60-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-61-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-62-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-63-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-70-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-71-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-72-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-73-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-80-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-81-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-82-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-83-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-90-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-91-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-92-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-93-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAR-102-1-XXXX | Gage Finish Reamer - Standard CA Tooling | 1 | |
| CAR-111-1-XXXX | Gage Finish Reamer - Standard CA Tooling | 1 | |
| CAR-70-1-*XXXX | Gage Finish Reamer - Standard CA Tooling | 1 | |
| CARBON STEEL 4340 | Surface Standard, .008"-.020"-.040" deep notches, 4340 | 1 | |
| CASE-10064-X600 | STANDARD RUGGED TRANSPORT CASE FOR THE 600 SERIES FLAW DETECTORS | 1 | |
| CAX0201 | 1/2HP STANDARD BENCH GRINDER | 1 | |
| CBCE-14A-04 23F | STANDARD NOSECAP ASSY | 1 | |
| CBCE-14A-0401F | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-14A-0601F | STANDARD NOSECAP | 1 | |
| CBCE-14A-0623F | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-14A-0801F | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-14A-0823F | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-14A-1023F | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-14B-0823F | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-14B-1001F | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-14C-1223F | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-14C-1623-F | STANDARD NOSECAP ASEMBLY | 1 | |
| CBCE-26D-18-2-NF | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-26E-26-3-NF | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBG-18-0-N-1 | DIMENSIONAL INSPECTION GAUGE, MADE OF STANDARD METAL, USED DURING AIRCRAFT REPAIRS. | 3 | |
| CBG-18-1-N-1 | DIMENSIONAL INSPECTION GAUGE, MADE OF STANDARD METAL, USED DURING AIRCRAFT REPAIRS. | 2 | |
| CBL-615 | STANDARD ARINC 615 DATA LOADER INTERFACE CABLE | 1 | |
| CBM-18-0-N-2-60-V1 | Mandrel - Standard CB Tooling | 3 | |
| CBM-18-1-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-18-2-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-18-3-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-20-0-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-20-1-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-20-2-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-20-3-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-22-0-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-22-1-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-22-2-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-22-3-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-24-0-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-24-1-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-24-2-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-24-3-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-26-0-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-26-1-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-26-2-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-26-3-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-28-0-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-28-1-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-28-2-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-28-3-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-30-0-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-30-1-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-30-2-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-30-3-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-6 | REFERENCE STANDARD | 2 | |
| CBSD-12-3-N-1 | STANDARD TOOL DIAMETER NUMBER | 2 | |
| CBXLBF3/16 | CBX STANDARD | 1 | |
| CC01 | Standard Duty Countersink Cage / Microstop | 1 | |
| CC01-USA | STANDARD DUTY COUNTERSINK CAGE / MICROSTOP 5/8" CUTTER CAPACITY. RATED FOR 3,000 RPM USE | 2 | |
| CC317 | Starrett 234A-1 STANDARD W/HANDLE | 1 | |
| CC322 | Starrett 234A-2 STANDARD W/HANDLE | 1 | |
| CC327 | Starrett 234A-3 STANDARD W/HANDLE | 1 | |
| CC332 | Starrett 234A-4 STANDARD W/HANDLE | 1 | |
| CC337 | Starrett 234A-5 STANDARD W/HANDLE | 1 | |
| CC342 | Starrett 234A-6 STANDARD W/HANDLE | 1 | |
| CC347 | Starrett 234A-7 STANDARD W/HANDLE | 1 | |
| CC352 | Starrett 234A-8 STANDARD W/HANDLE | 1 | |
| CC357 | Starrett 234A-9 STANDARD W/HANDLE | 1 | |
| CC362 | Starrett 234A-10 STANDARD W/HANDLE | 1 | |
| CC367 | Starrett 234A-11 STANDARD W/HANDLE | 1 | |
| CC372 | Starrett 234A-12 STANDARD W/HANDLE | 1 | |
| CC377 | Starrett 234A-13 STANDARD W/HANDLE | 1 | |
| CC382 | Starrett 234A-14 STANDARD W/HANDLE | 1 | |
| CC387 | Starrett 234A-15 STANDARD W/HANDLE | 1 | |
| CC392 | Starrett 234A-16 STANDARD W/HANDLE | 1 | |
| CC397 | Starrett 234A-17 STANDARD W/HANDLE | 1 | |
| CC402 | Starrett 234A-18 STANDARD W/HANDLE | 1 | |
| CC407 | Starrett 234A-19 STANDARD W/HANDLE | 1 | |
| CC412 | Starrett 234A-20 STANDARD W/HANDLE | 1 | |
| CC417 | Starrett 234A-21 STANDARD W/HANDLE | 1 | |
| CC422 | Starrett 234A-22 STANDARD W/HANDLE | 1 | |
| CC427 | Starrett 234A-23 STANDARD W/HANDLE | 1 | |
| CC432 | Starrett 234A-24 STANDARD W/HANDLE | 1 | |
| CC437 | Starrett 234MA-25 STANDARD W/HANDLE | 1 | |
| CC442 | Starrett 234MA-50 STANDARD W/HANDLE | 1 | |
| CC447 | Starrett 234MA-75 STANDARD W/HANDLE | 1 | |
| CC452 | Starrett 234MA-100 STANDARD W/HANDLE | 1 | |
| CC457 | Starrett 234MA-125 STANDARD W/HANDLE | 1 | |
| CC462 | Starrett 234MA-150 STANDARD W/HANDLE | 1 | |
| CC467 | Starrett 234MA-175 STANDARD W/HANDLE | 1 | |
| CC472 | Starrett 234MA-200 STANDARD W/HANDLE | 1 | |
| CC477 | Starrett 234MA-225 STANDARD W/HANDLE | 1 | |
| CC482 | Starrett 234MA-250 STANDARD W/HANDLE | 1 | |
| CC487 | Starrett 234MA-275 STANDARD W/HANDLE | 1 | |
| CC492 | Starrett 234MA-300 STANDARD W/HANDLE | 1 | |
| CC497 | Starrett 234MA-325 STANDARD W/HANDLE | 1 | |
| CC502 | Starrett 234MA-350 STANDARD W/HANDLE | 1 | |
| CC507 | Starrett 234MA-375 STANDARD W/HANDLE | 1 | |
| CC512 | Starrett 234MA-400 STANDARD W/HANDLE | 1 | |
| CC517 | Starrett 234MA-425 STANDARD W/HANDLE | 1 | |
| CC522 | Starrett 234MA-450 STANDARD W/HANDLE | 1 | |
| CC527 | Starrett 234MA-475 STANDARD W/HANDLE | 1 | |
| CC532 | Starrett 234MA-500 STANDARD W/HANDLE | 1 | |
| CC537 | Starrett 234MA-525 STANDARD W/HANDLE | 1 | |
| CC542 | Starrett 234MA-550 STANDARD W/HANDLE | 1 | |
| CC547 | Starrett 234MA-575 STANDARD W/HANDLE | 1 | |
| CC552 | Starrett 234MA-600 STANDARD W/HANDLE | 1 | |
| CC817 | Starrett S234MG SET STANDARDS 25-275MM | 1 | |
| CC825 | Starrett S234J SET STANDARDS 12-23" | 1 | |
| CE1331699-003 | 8 STEP THICKNESS CALIBRATION STANDARD. STEP SIZES: .025", .030", .035", .040", .045", .055", .060", .068" +/-.001". PAD SIZE 1.0" x 1.25" TYP. MATERIAL: 7475-T7351 ALUMINUM, CHROMIC ACID ANODIZED. Includes Test Report and Certificate of Conformance. | 1 | |
| CE1617528 | CALIBRATION STANDARD, BOMBARDIER TEST REFERENCE ULTRA SONIC NDI. MATERIAL: 7475-T7351 and 7040-T7451 ALUMINUM. MS90254U0805D FASTENERS. Includes Test Report and Certificate of Conformance. | 1 | |
| CE1617529 | CALIBRATION STANDARD, BOMBARDIER TEST REFERENCE ULTRA SONIC NDI. MATERIAL: 7475-T7351 and 7040-T7451 ALUMINUM. MS90254U0805D FASTENERS. Includes Test Report and Certificate of Conformance. | 1 | |
| CE9900085-101 | COMPOSITE LAMINATE CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900086-101 | COMPOSITE LAMINATE CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900088-001 | COMPOSITE SANDWICH CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900088-003 | COMPOSITE SANDWICH CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900088-005 | CALIBRATION REFERENCE STANDARD (CRS) | 1 | |
| CE9900088-007 | COMPOSITE SANDWICH CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900088-009 | COMPOSITE SANDWICH CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900430-001 | COMPOSITE SANDWICH CALIBRATION REFERENCE STANDARD | 1 | |
| CESSNA 17-7PH .050 | Cessna Standard 17-7 PH .050" thick 2.5" x 2.5" | 1 | |
| CFL10 | CYLINDER HONE STANDARD 3 TO 4-1/4 | 1 | |
| CFRP-AL-R&D-1 | Boeing Standard | 1 | |
| CFRP-AL-R&D-2 | Boeing Standard | 1 | |
| CFRP-AL-R&D-3 | Boeing Standard | 1 | |
| CFRP-AL-R&D-4 | Boeing Standard | 1 | |
| CFRP-AL-R&D-5 | Boeing Standard | 1 | |
| CG2-000 | BUBBLE COVER (STANDARD MODEL) | 1 | |
| CGG4850-16 | COUPLER CONVERTER STANDARD. | 1 | |
| CH-410 | SCREW ON AIR CHUCK STANDARD | 1 | |
| CH77-000 | BUBBLE COVER (STANDARD MODEL) | 1 | |
| CHRS-1-12 | Composite Standard, Boeing 767 PT1 51-01-01 PG14- R&D | 1 | |
| CHRS-1-3 | Composite Standard Boeing 767 PT1 51-01-01 PG14 R&D | 1 | |
| CHRS-1-6 | Composite Standard Boeing 767 PT1 51-01-01 PG14 R&D | 1 | |
| CHRS-1-9 | Composite Standard, Boeing 767 PT1 51-01-01 PG 14 R&D | 1 | |
| CHRS-2-12 | Carbon Reference Standard, SAE ARP5606, 12 PLY R&D | 1 | |
| CHRS-2-3 | Carbon Reference Standard, SAE ARP5606, 3 PLY R&D | 1 | |
| CHRS-2-3-.5D | Carbon Reference Standard, SAE ARP5606, 3 PLY- .5D R&D | 1 | |
| CHRS-2-6 | Carbon Reference Standard, SAE ARP5606, 6 PLY R&D | 1 | |
| CHRS-2-6-.5D | Carbon Reference Standard, SAE ARP5606, 6 PLY- .5D R&D | 1 | |
| CHRS-2-9 | Carbon Reference Standard, SAE ARP5606, 9 PLY R&D | 1 | |
| CHRS-2-9-.5D | Carbon Reference Standard, SAE ARP5606, 9 PLY- .5D R&D | 1 | |
| CJMD156-101 | CALIBRATION STANDARD | 3 | |
| CLAA99-14CRG | 4-BAY BATTERY CHARGER FOR 9900/9100 SYSTEM BATTERIES. THE 4-BAY BATTERY CHARGER (CLAA99-14CRG) REQUIRES A STANDARD 110V CORD WITH A THREE-PRONG PLUG FOR CHARGING | 1 | |
| CM-ET-S-AL2014A-T6 | CONDUCTIVITY STANDARD ALLUMINIUM | 1 | |
| CM-ET-S-AL5083 | CONDUCTIVITY STANDARD ALLUMINIUM | 1 | |
| CM-ET-S-AL6082-T6 | CONDUCTIVITY STANDARD ALLUMINIUM | 1 | |
| CM-ET-S-BRS | CONDUCTIVITY STANDARD ALLUMINIUM | 1 | |
| CN1020A12G12SN-200 | STANDARD CIRCULAR CONNECTOR | 1 | |
| COMPOSITE STANDARD 1-10 PLIES | COMPOSITE STANDARD, BOEING 737 PT1 51-04-00 FIG. 8 SHEET 2: BMS 8-79, TYPE1581, CL3 GR1, 1-10 PLIES | 1 | |
| COMPOSITE STANDARD 11-20 PLIES | COMPOSITE STANDARD, BOEING 737 PT1 51-04-00 FIG. 8 SHEET 2: BMS 8-79, TYPE1581, CL3 GR1, 11-20 PLIES | 1 | |
| COMPOSITE STANDARD 21-30 PLIES | COMPOSITE STANDARD, BOEING 737 PT1 51-04-00 FIG. 8 SHEET 2: BMS 8-79, TYPE1581, CL3 GR1, 21-30 PLIES | 1 | |
| COUPON 12 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-3. 05-30-10 PG.193. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 2 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-4. 05-30-10 PG.190. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 25 | PEMCO LOW FREQUENCY EDDY CURRENT STANDARD FOR INSPECTION UJ-1. 05-30-10 PAGE 194. EDM NOTCH: .030 MAX WIDTH x .240" LONG. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 29 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-3 and ED-4. 05-30-10 PG.195. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 3 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-3. 05-30-10 PG.191. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 31 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-5. 05-30-10 PG.196. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 6 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-5. 05-30-10 PG.192. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON NO. 12 | PEMCO Standard 05-30-10 Pg 192 | 1 | |
| COUPON NO. 2 | PEMCO Standard 05-30-10 Pg 189 | 1 | |
| COUPON NO. 25 | PEMCO Standard 05-30-10 Pg 182 | 1 | |
| COUPON NO. 29 | PEMCO Standard 05-30-10 Pg 194 | 1 | |
| COUPON NO. 3 | PEMCO Standard 05-30-10 Pg 190 | 1 | |
| COUPON NO. 31 | PEMCO Standard 05-30-10 Pg 184 | 1 | |
| COUPON NO. 6 | PEMCO Standard 05-30-10 Pg 180 | 1 | |
| CP4444RURAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) | 2 | |
| CP4444RUSAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 3 | |
| CP4444RUTAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 4 | |
| CP4447RUSAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4447RUTAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4447RUVAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4450-2 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4450-3 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 2 | |
| CP4450-4 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 4 | |
| CP4475-3 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4475-4 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4475-6 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CREF3-172942 | CONDUCTIVITY STANDARD, MFG: OLYMPUS | 1 | |
| CREF3-172959 | REFERENCE STANDARD | 1 | |
| CREF3-294259 | CONDUCTIVITY STANDARD | 1 | |
| CREF4-17294259 | ALUMINIUM CONDUCTIVITY STANDARD | 1 | |
| CREF4-173259100 | CONDUCTIVITY STANDARDS | 1 | |
| CREF5-01293242100 | CONDUCTIVITY STANDARD SET | 1 | |
| CREF5-04174559100 | CONDUCTIVITY STANDARD | 1 | |
| CREFS-04174559100 | REFERENCE STANDARD | 1 | |
| CRES 17-4PH | Surface Standard, .008"-.020"-.040" deep notches, 17-4PH | 2 | |
| CRFG-R30-1-XXXX/YYYY | Final Hole Gage - Standard CR Tooling | 1 | |
| CRM-R30-1-30-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R32-1-30-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R40-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R42-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R50-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R52-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R60-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R62-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRS AL 35-45 | Surface Standard, .008"-.020"-.040" deep notches, 2024-T6 | 1 | |
| CSCASEINCL | CSCASEINCL;Standard Soft Case for TB6000A with MSAM | 1 | |
| CTS DHC29445-001 | CALIBRATION TEST STANDARD (CTS), | 1 | |
| CTS-A1 | COATING GUAGE STANDARD | 1 | |
| CU882 | Starrett S436MFXRLZ MIC SET + STANDARDS | 1 | |
| CW-23 | MC-130H standard | 1 | |
| CW-23 OW-47 | C-130 CALIBRATION STANDARD. MATERIAL:7075-T7 or Equivalent Aluminum. FASTENER (NAS517-3-2) 2 Places. Includes Test Report and Certificate of Conformance For Standard and Certification for material and Fasteners. | 1 | |
| CW-23/OW-47 | C130J Calibration Standard 57-10-09 Pg 7-93 Fg 7-9 | 1 | |
| CX100-R-SILVER | CX100-R-SILVER;1yr. Renewal Standard Full Maintenance Contract CX100 Existing Equipment | 1 | |
| CX300-R-SILVER | CX300-R-SILVER;1yr. Renewal Standard Full Maintenance Contract CX300 Existing Equipment | 1 | |
| D-5905P | GAUSSMETER (10-0-10) WITH CERTIFICATE TRACEABLE TO NIST STANDARD | 1 | |
| D01068-002 | OW HYDRAULIC LIFT D01068-002+ 16A CEE, STANDARD 30 M; COLOR RAL 6018 YELLOW-GREEN, HYDRO | 1 | |
| D02016-002 | WING HYDRAULIC LIFT D02016-002 + 16A CEE, STANDARD 30 M: RAL 6018 YELLOW-GREEN, HYDRO | 1 | |
| D02540K2D1E01B0 | HYDRO Standard B787 Nose Tripod Jack | 2 | |
| D04020K3D1E01B0 | HYDRO Standard B787 Tail Tripod Jack | 2 | |
| D08504K3D1E01B0 | HYDRO Standard A330 /A340-200/-300 Wing Tripod Jack | 2 | |
| D08505K3D1E01B0 | HYDRO Standard B787 Wing Tripod Jack | 2 | |
| D12-100 | CALIBRATING OIL,STANDARD | 1 | |
| D12-50 | CALIBRATING OIL,STANDARD | 1 | |
| D12-5 | CALIBRATING OIL,STANDARD | 1 | |
| D19-0 | CALIBRATING OIL,STANDARD | 1 | |
| D3-1 | DC-3 Reference Standard | 1 | |
| DAC CAG 06-20-01 F17-1 | Douglas Standard, Douglas PT6 06-20-01:PGF17 FIG8 SHEET1, Include -1 thru -7 | 1 | |
| DAC CAG 06-20-01 F18-3 | Douglas Standard, Douglas PT6 06-20-01:PGF18 FIG8 SHEET1, .071 Thick | 1 | |
| DAC CAG 06-20-01 F18-3-.063" | Douglas Standard, Douglas PT6 06-20-01:PGF18 FIG8 SHEET1, ..063" Thick | 1 | |
| DAC CAG 06-20-01 F18-3-.130" | Douglas Standard, Douglas PT6 06-20-01:PGF18 FIG8 SHEET1, .130" Thick | 1 | |
| DAC CAG 06-20-01 F18-3-.165" | Douglas Standard, Douglas PT6 06-20-01:PGF18 FIG8 SHEET1, .165" Thick | 1 | |
| DAC CAG 06-20-01 F19-5 | Douglas Standard, Douglas PT6 06-20-01:PGF19 FIG8 SHEET1, .063 Thick | 1 | |
| DAC CAG 06-20-01 F19-5-.050" | Douglas Standard, Douglas PT06-20-01:PGF19 FIG8 SHEET1, .050" Thick | 1 | |
| DAC CAG 06-20-01 F19-5-.188" | Douglas Standard, Douglas PT6 06-20-01:PGF19 FIG8 SHEET1, .188" Thick | 1 | |
| DAC CAG 06-20-01 F20-7 | Douglas Standard, Douglas PT6 06-20-01:PGF20 FIG8 SHEET1, .100 Thick | 1 | |
| DAC CAG 06-20-01 F22-3-.050 | Douglas Standard, Douglas PT6 06-20-01:PGF22 FIG9 SHEET1, .050" Thick | 1 | |
| DAC CAG 06-20-01 F22-3-.063 | Douglas Standard, Douglas PT6 06-20-01:PGF22 FIG9 SHEET1, .063" Thick | 1 | |
| DAC CAG 06-20-01 F22-3-.071 | Douglas Standard, Douglas PT6 06-20-01:PGF22 FIG9 SHEET1, .071" Thick | 1 | |
| DAC CAG 06-20-01 F22-3-.080 | Douglas Standard, Douglas PT6 06-20-01:PGF22 FIG9 SHEET1, .080" Thick | 1 | |
| DAC CAG 06-20-01 F22-3-.090 | Douglas Standard, Douglas PT6 06-20-01:PGF22 FIG9 SHEET1, .090" Thick | 1 | |
| DAC CAG 06-20-01 F22-3-.100 | Douglas Standard, Douglas PT6 06-20-01:PGF22 FIG9 SHEET1, .100" Thick | 1 | |
| DAC CAG 06-20-01 F22-3-.125 | Douglas Standard, Douglas PT6 06-20-01:PGF22 FIG9 SHEET1, .125" Thick | 1 | |
| DAC CAG 06-20-01 F22-3-.130 | Douglas Standard, Douglas PT6 06-20-01:PGF22 FIG9 SHEET1, .130" Thick | 1 | |
| DAC CAG 06-20-01 F22-3-.160 | Douglas Standard, Douglas PT6 06-20-01:PGF17 FIG9 SHEET1, .160" Thick | 1 | |
| DAC CAG 06-20-01 F22-3-.165 | Douglas Standard, Douglas PT6 06-20-01:PGF22 FIG9 SHEET2, .165Thick | 1 | |
| DAC CAG 06-20-01 F23-5-.050 | Douglas Standard, Douglas PT6 06-20-01:PGF23 FIG9 SHEET1, .050 Thick | 1 | |
| DAC CAG 06-20-01 F23-5-.063 | Douglas Standard, Douglas PT6 06-20-01:PGF23 FIG9 SHEET1, .063 Thick | 1 | |
| DAC CAG 06-20-01 F23-5-.071 | Douglas Standard, Douglas PT6 06-20-01:PGF23 FIG9 SHEET1, .071 Thick | 1 | |
| DAC CAG 06-20-01 F23-5-.080 | Douglas Standard, Douglas PT6 06-20-01:PGF23 FIG9 SHEET1, .080 Thick | 1 | |
| DAC CAG 06-20-01 F23-5-.090 | Douglas Standard, Douglas PT6 06-20-01:PGF23 FIG9 SHEET1, .090 Thick | 1 | |
| DAC CAG 06-20-01 F23-5-.100 | Douglas Standard, Douglas PT6 06-20-01:PGF23 FIG9 SHEET1, .100 Thick | 1 | |
| DAC CAG 06-20-01 F23-5-.125 | Douglas Standard, Douglas PT6 06-20-01:PGF23 FIG9 SHEET1, .125 Thick | 1 | |
| DAC CAG 06-20-01 F23-5-.160 | Douglas Standard, Douglas PT6 06-20-01:PGF23 FIG9 SHEET1, .125 Thick | 1 | |
| DAC CAG 06-20-01 F23-5-.188 | Douglas Standard, Douglas PT6 06-20-01:PGF23 FIG9 SHEET1, .188 Thick | 1 | |
| DAC CAG 06-20-01 F24-7 | Douglas Standard, Douglas PT6 06-20-01:PGF24 FIG9 SHEET1, .100 Thick | 1 | |
| DAC ETBS AL-1T 2024-T3 0.071 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1 | 1 | |
| DAC ETBS AL-1T 2024-T3 0.080 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1 | 1 | |
| DAC ETBS AL-1T 2024-T3 0.063 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5, 06-10-02.005. MATERIAL: 2024-T3 ALUMINUM 0.063". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETBS AL-1T 7075-T6 0.032 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1 | 1 | |
| DAC ETBS AL-1T 7075-T6 0.040 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1 | 1 | |
| DAC ETBS AL-1T 7075-T6 0.040:DAC ETBS AL-1T 7075-T6 0.050 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1 | 1 | |
| DAC ETBS AL-1T 7075-T6 0.050 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1 | 1 | |
| DAC ETBS AL-1T 7075-T6 0.063 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1 | 1 | |
| DAC ETBS AL-1T 7075-T6 0.071 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1 | 1 | |
| DAC ETBS AL-1T 7075-T6 0.080 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1 | 1 | |
| DAC ETBS AL-1T 7075-T6 0.090 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1 | 1 | |
| DAC ETBS AL-1T 7075-T6 0.100 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1 | 1 | |
| DAC ETBS AL-1T 7075-T6 0.120 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1, 7075-T6 Aluminum | 1 | |
| DAC ETBS AL-1T 7075-T6 0.120:DAC ETBS AL-1T 7075-T6 0.125 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1 | 1 | |
| DAC ETBS AL-1T 7075-T6 0.120:DAC ETBS AL-1T 7075-T73 0.120 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1, 7075-T73 Aluminum | 1 | |
| DAC ETBS AL-1T 7075-T73 0.080 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1 | 1 | |
| DAC ETBS AL-1T 7075-T73 0.090 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1 | 1 | |
| DAC ETBS AL-1T 7075-T73 0.100 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1 | 1 | |
| DAC ETBS AL-1T 7075-T73 0.120 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1 | 1 | |
| DAC ETBS AL-1T/ 0.032 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 7075-T7 ALUMINUM .032". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETBS AL-1T/ 0.071 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 2024-T3 ALUMINUM .071". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETBS AL-1T/ 0.090 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 7075-T6 ALUMINUM .090". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETBS AL-1T/0.080 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 2024-T3 ALUMINUM .080". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH AL | 7075-T6 Aluminum Multi-purpose Reference Standard 1/8" to 3/4" holes similar to RH120 | 1 | |
| DAC ETOH AL | Multi Purpose Calibration Standard. 13 Basic Hole Sizes; 1/8, 5/32, 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .030 x .030 x .005 Corner EDM Notches in each Hole, .020 x .005 Thru EDM Notch in holes less than 3/16. Mat | 1 | |
| DAC ETOH FE | 4340 Multi-purpose Reference Standard 1/8" to 3/4" holes similar to RH120 | 1 | |
| DAC ETOH MG.060-5/8-1/8 | EDM notch re-certification of reference standards and SN engraving | 1 | |
| DAC ETOH TI | 6AL-4V Multi-purpose Reference Standard 1/8" to 3/4" holes similar to RH120 | 1 | |
| DAC ETOH-AL-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL.04 | 717-200 OPEN HOLE REFERENCE STANDARD. FIG. 1.20, PAGE 1. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE.08 | 717-200 REFERENCE STANDARD...FIG. 1.9, PAGE 1. MATERIAL: 4340 STEEL PER MIL-S-5000. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC G SET T1.01 | 6AL-4V TITANIUM MULTI-PURPOSE REFERENCE STANDARD | 1 | |
| DAC GSET AL.01 | 7075-T6 Aluminum Multi-purpose Reference Standard | 1 | |
| DAC GSET AL.01-MV | 7075-T6 Aluminum Multi-purpose Reference Standard, Modified Version, Surface notches are only .125"long from edge of standard | 1 | |
| DAC GSET AL.01-N1-N2 | General Surface Aluminum HFET Reference Standard MD-11 section 2-1 page 1 figure 1.1 | 1 | |
| DAC GSET FE.01 | 4340 Multi-purpose Reference Standard | 1 | |
| DAC GSET IN.01 | Inconel 600, Multi-purpose Reference Standard | 1 | |
| DAC GSET MG.01 | Aluminum-Broze (10%-20% IACS) Reference Standard | 1 | |
| DAC GSET SS.01 | 303 Stainless Steel Multi-purpose Reference Standard | 1 | |
| DAC GSET ST.01 | 4340 Mil-Spec. 5000 Steel Multi-purpose Reference Standard | 1 | |
| DAC GSET TI.01 | 6AL-4V Titanium Multi-purpose Reference Standard | 1 | |
| DAC GSET TI.01-MV | 6AL-4V Titanium Multi-purpose Reference Standard, Modified Version, Surface notches are only .125"long from edge of standard | 1 | |
| DAC GSET Ti.01-N1-N2 | General Surface Titanium HFET Reference Standard MD-11 section 2-1 page 1 figure 1.2 | 1 | |
| DAC GSET-AL | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 7075-T6 | 1 | |
| DAC GSET-AL.01 | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 FIG.1 SHEETS 1-3. MATERIAL: 7075-T6 ALUMINUM PER QQ-Q-250/12. | 1 | |
| DAC GSET-FE | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 4340 | 1 | |
| DAC GSET-FE.01 | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 FIG.1 SHEETS 1-3. MATERIAL: 4340 STEEL PER MIL-S-5000 | 1 | |
| DAC GSET-MG | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 ALUMINUM BRONZE | 1 | |
| DAC GSET-SS.01 | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 FIG.1 SHEETS 1-3. MATERIAL: 303SE CRES or 301 1/2 HARD CRES STEEL. | 1 | |
| DAC GSET-TI.01 | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 FIG.1 SHEETS 1-3. MATERIAL: 6AL-4V TITANIUM PER AMS 491 or MIL-T-9046 | 1 | |
| DAC-G-SET AL 01 | REFERENCE STANDARD | 1 | |
| DASTM D7215-16 | STANDARD TEST METHOD FOR CALCULATED FLASH POINT SIMULATED DISTILLATION ANALYSIS OF DISTILLATE FUELS | 1 | |
| DAT06AETA1000 | AXIAL STANDARD CRIMPING TOOL | 1 | |
| DAT06AETA4000 | AXIAL STANDARD CRIMPING TOOL | 1 | |
| DAT06AETA5000 | AXIAL STANDARD CRIMPING TOOL | 1 | |
| DBS-1100-32 | Tension Adjustment Key for use with .250 standard width Band Tools | 1 | |
| DBS-2100 | HAND BANDING TOOL - STANDARD CLAMPING BAND | 5 | |
| DC-10 FIG603/15C | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 628B FIG.603 SHEET 15C | 1 | |
| DC-10 FIG603/15E/4340 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 CARBON STEEL, 54-10-11 PAGE 628D FIG.603 SHEET 15E | 1 | |
| DC-10 FIG603/15E/Ti | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 628D FIG.603 SHEET 15E | 1 | |
| DC-10 FIG603/15G | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 CARBON STEEL, 54-10-11 PAGE 628F FIG.603 SHEET 15G | 1 | |
| DC-10 FIG603/23 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 7075-T6 ALUMINUM, 54-10-11 PAGE 635 FIG.603 SHEET 23 | 1 | |
| DC-10 FIG603/24-Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 636C FIG.603 SHEET 24 | 1 | |
| DC-10 FIG603/24-Ti | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 636C FIG.603 SHEET 24 | 1 | |
| DC-10 FIG603/25 | DOUGLAS DC-10 WING CLEVIS REFERENCE STANDARD 6AL-6V or 6AL-4 TITANIUM, 54-10-11 PAGE 637 FIG.603 SHEET 25 | 1 | |
| DC-10 FIG603/27Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 639 FIG.603 SHEET 27 | 1 | |
| DC-10 FIG603/27Ti | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 639 FIG.603 SHEET 27 | 1 | |
| DC-10 FIG603/28LOWER/Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 640 FIG.603 SHEET 28 (LOWER) | 1 | |
| DC-10 FIG603/28LOWERTi | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 640 FIG.603 SHEET 28 (LOWER) | 1 | |
| DC-10 FIG603/28UPPER/Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 640 FIG.603 SHEET 28 (UPPER) | 1 | |
| DC-10 FIG603/28UPPER/Ti | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 640 FIG.603 SHEET 28 (UPPER) | 1 | |
| DC-10 FIG603/29Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 641 FIG.603 SHEET 29 | 1 | |
| DC-10 FIG603/29Ti | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 641 FIG.603 SHEET 29 | 1 | |
| DC-10 FIG603/30-AL | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 7075-T6 ALUMINUM, 54-10-11 PAGE 642 FIG.603 SHEET 30 | 1 | |
| DC-10 FIG603/39-1 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4130 or 4340, 54-10-11 PAGE 651 FIG.603 SHEET 39, BOLT IDENTIFICATION 71658-7-35 #1 | 1 | |
| DC-10 FIG603/39-2 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4130 or 4340, 54-10-11 PAGE 651 FIG.603 SHEET 39, BOLT IDENTIFICATION 71658-18-53 #2 | 1 | |
| DC-10 FIG603/39-3 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4130 or 4340, 54-10-11 PAGE 651 FIG.603 SHEET 39, BOLT IDENTIFICATION 71658-18-53 #3 | 1 | |
| DC-10 FIG603/39-4 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4130 or 4340, 54-10-11 PAGE 651 FIG.603 SHEET 39, BOLT IDENTIFICATION 71658-7-35 #4 | 1 | |
| DC-10 FIG603/43 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 655 FIG.603 SHEET 43 | 1 | |
| DC-10 FIG603/5 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 CARBON STEEL, 54-10-11 PAGE 617 FIG.603 SHEET 5 | 1 | |
| DC-9/MD-80-1 FIG 21 | Boeing DC-9/MD-80 Reference Standard Design (1- Assembly) Figure 21, Sheet 1-5 Page 31-35, 7-5. Includes Test Report and Certificate of Conformance. | 1 | |
| DC101 | REFERENCE STANDARD | 1 | |
| DC3-1 | DC-3 REFERENCE STANDARD ..SECTION 3 PAGE 2 FIGURE 1.1 | 1 | |
| DHC 25533-001 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC 25533-003M | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC 29116-001 | deHAVILLAND DASH 8 LFEC CALIBRATION STANDARD. PART 6 53-30-31 PAGE 7 FIGURE 3. Includes Test Report and Certificate of Conformance. | 3 | |
| DHC 29116-007 | CALIBRATION TEST STANDARD, DASH8 PT6 53-30-01:PG7 FIG3 | 3 | |
| DHC 29117-001 | deHAVILLAND DASH 8 LFEC CALIBRATION STANDARD. PART 6 53-10-21 PAGE 5 FIGURE 3. Includes Test Report and Certificate of Conformance. | 3 | |
| DHC 29198-003 | CALIBRATION TEST STANDARD | 1 | |
| DHC 29298-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC 29381-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| DHC 29394-001 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC 29434-101 | CALIBRATIONTEST STANDARD (CTS) | 3 | |
| DHC 29435-001 | CALIBRATION TEST STANDARD, DASH8 PT6 53-10-61:PG7 FIG3 | 2 | |
| DHC 29438-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC 29442-001 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC 29443-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC 29445-001 | CALIBRATION TEST STANDARD | 3 | |
| DHC-25533-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC-29116-001 | Calibration Test Standard, DASH8 PT6 53-30-01:PG7 FIG3 | 3 | |
| DHC-29116-007 | Calibration Test Standard, DASH8 PT6 53-30-01:PG7 FIG3 | 3 | |
| DHC-29117-001 | Calibration Test Standard, DASH8 PT6 53-10-21:PG5 FIG3 | 3 | |
| DHC-29198-003 | CALIBRATION TEST STANDARD | 1 | |
| DHC-29298-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC-29394-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC-29434-001 | Calibration Test Standard, DASH8 PT6 53-10-41:PG7 FIG2 | 1 | |
| DHC-29434-101 | Calibration Test Standard, DASH8 PT6 53-10-41:PG8 FIG2 | 3 | |
| DHC-29435-001 | Calibration Test Standard, DASH8 PT6 53-10-61:PG7 FIG3 | 2 | |
| DHC-29436-001 | Calibration Test Standard, DASH8 PT6 51-00-03:PG7 FIG3 | 1 | |
| DHC-29437-001 | Calibration Test Standard, DASH8 PT6 51-00-03:PG7 FIG4 | 1 | |
| DHC-29438-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC-29443-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC-29444 | Q400 Reference Standard, De Havilland Drawing No DHC29444-01 | 1 | |
| DHC-29444-001 | Q400 Reference Standard, De Havilland Drawing No DHC29444-001 | 1 | |
| DHC25533-001 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC25533-003M | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC29051001 | TEST STANDARD | 1 | |
| DHC29117-001 | CALIBRATION TEST STANDARD, DASH8 PT6 53-10-21:PG5 FIG3 | 3 | |
| DHC29198-003 | CALIBRATION TEST STANDARD | 1 | |
| DHC29298-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC29298-003 | NDT CALIBRATION STANDARD | 1 | |
| DHC29381-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| DHC29394-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC29425-101 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| DHC29434-101 | CALIBRATIONTEST STANDARD (CTS) | 3 | |
| DHC29435-001 | CALIBRATION TEST STANDARD, DASH8 PT6 53-10-61:PG7 FIG3 | 2 | |
| DHC29436-001 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| DHC29437-001 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| DHC29438-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC29442-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC29443-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC29445-001 | CALIBRATION TEST STANDARD - Q400 | 3 | |
| DK-A320-53-1378-1 | STANDARD TOOL | 3 | |
| DKA320531378-1 | STANDARD TOOL | 3 | |
| DKA3205313781 | STANDARD TOOL | 3 | |
| DKA3205313791 | STANDARD TOOL | 2 | |
| DKA320531381-1 | STANDARD TOOL | 1 | |
| DLH294 | STANDARD UNIT | 1 | |
| DMAK-A320X-E18K2P0V3 | STANDARD PITOT STATIC ADAPTER KIT | 1 | |
| DMAK-A320X-E1K0P0V3 | STANDARD PITOT STATIC ADAPTER KIT | 1 | |
| DMC1264 | KIT, CRIMP TOOL - ELECTRICAL CONNECTOR REF FOUND IN STANDARD WIRE PRACTICES MANUAL (SWPM). (DANIELS MANUFACTURING CORPORATION) | 7 | |
| DN2XD5-02 | STANDARD WRENCHES | 1 | |
| DN2YD3-02 | STANDARD SOCKETS | 1 | |
| DPI-610 | Pressure Calibrator - Standard | 11 | |
| DPS1000 | DIGITAL PITOT STATIC TEST SET , WITH STANDARD ACCESSORIES | 9 | |
| DRT74469 | Messier-Dowty Reference Standard, Aluminum, Appendix A Service Bulletin No. 146-32-174 Pg 4 Fg A2 | 2 | |
| DRXDA31320GF | STANDARD REPLACEMENT WHEEL X | 1 | |
| DSE-100X | STANDARD TOOL,DIGIT | 1 | |
| DT1039-T1/T2 | REFERENCE STANDARD,PHYICAL PROPERTIES | 1 | |
| DT1407K3D1E01B0 | HYDRO Standard A330 / A340-200/-300 Nose Tripod Jack | 2 | |
| DYMO LETRATAG 100H | DYMO LABEL MAKER (STANDARD) | 1 | |
| E-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| E-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| E-2TM | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| E0 8199-4F | CALIBRATION TEST STANDARD | 1 | |
| E135-600 | BLADE COVERS (STANDARD DESIGN) (set of 4) | 1 | |
| E18001 | STANDARD BATTERY DISCONNECT PLUG ASSY | 1 | |
| E190 57-001 | EMBRAER 190/195 REFERENCE STANDARD, 190:00335-99999 OR POST-MOD SB 190-57-0031/02. PART 6 57-50-00, FIGURE 1-SHEET 1&2. | 1 | |
| E400089-ENC | CONFIRM FROM NDT FOR STANDARD | 1 | |
| E400089−ENC | CONFIRM FROM NDT FOR STANDARD | 1 | |
| E53-002A | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .031"..Doubler = .040"..Filler = .031"..Stringer = .063" | 1 | |
| E53-002A. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .031"..Doubler 1 = .040"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002B | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .047"..Doubler = .050"..Filler = .047"..Stringer = .063" | 1 | |
| E53-002B. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .047"..Doubler 1 = .050"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002C | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .055"..Doubler = .063"..Filler = .055"..Stringer = .063" | 1 | |
| E53-002C. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .055"..Doubler 1 = .063"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002D | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .071"..Doubler = .080"..Filler = .071"..Stringer = .063" | 1 | |
| E53-002D. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .071"..Doubler 1 = .080"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002E | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .080"..Doubler = .098"..Filler = .080"..Stringer = .063" | 1 | |
| E53-002E. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .080"..Doubler 1 = .098"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002F | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .098"..Doubler = .110"..Filler = .098"..Stringer = .063" | 1 | |
| E53-002F. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .098"..Doubler 1 = .110"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-003A | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-003B | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-003C | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-003D | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-003E | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-003F | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-004 | EMBRAER 190/195 REFERENCE STANDARD PT 6 53-23-00 pages 1-13. Material: 2024-T3 Alclad Aluminum. Repair Doubler Configuration. Includes Test Report and Certificate of Conformance. Repair Doubler = .125" Fus Skin Thickness = .098" Filler = .098" In | 1 | |
| E54-003 | EMBRAER 170/175 CALIBRATION STANDARD PT 4 54-50-00 Embraer 170 NDT 1967 Rev. 49, pages 11-13 and Embraer 175 NDT 5893 Rev. 25, pages 10-12. Includes Test Report and Certificate of Conformance. | 1 | |
| E64NNDT-3024A | Reference standard | 1 | |
| EBTOR-HW-STDW | EBTOR-HW-STDW;STANDARD HW WARRANTY OF 3 YEARS EXTRATED FROM OUR HW PRICE - BTOR | 1 | |
| EBTOR-HW-STDW1 | EBTOR-HW-STDW1;STANDARD HW WARRANTY OF 1 YEAR EXTRATED FROM OUR HW PRICE - BTOR ONLY | 1 | |
| EC-AF-NRK-3A | CTS-PH-TOOL, CONFIRM FROM NDT FOR STANDARD | 1 | |
| EC-AF-NRK-3AL | CTS-PH-TOOL, CONFIRM FROM NDT FOR STANDARD | 1 | |
| EC-AF-NRK-3S | CTS- PH-TOOL,CONFIRM FROM NDT FOR STANDARD | 1 | |
| EC-AF-NRK-Case | CASE FOR EDDY CURRENT STANDARD TOOL | 1 | |
| EC-PHT-MHS-12-1CS-O | STEEL MUTLI HOLE REFERENCE STANDARD>>> THE NOTCH SPECIFICATION IS 0.030'' X 0.030'' (45° ) CORNER NOTCH | 1 | |
| ECL-100 | ENGINE COVER SET, standard design (set of 8) | 1 | |
| ECRS-0824/AL | ALUMINUM CALIBRATION STANDARD | 1 | |
| ECRS-0824/SS | "STAINLESS STEEL CALIBRATION STANDARD | 1 | |
| ECRS-0824/TI | "TITANIUM CALIBRATION STANDARD | 1 | |
| ECTSA109 | 0.5M STANDARD LIGHTBAR | 1 | |
| ECTSA109UK | 0.5M STANDARD TS LIGHT | 1 | |
| ECTSA289 | LIGHT BAR BUNDLE 4 FT STANDARD | 1 | |
| ECTSA289UK | LIGHT BAR BUNDLE 4FT-STANDARD | 1 | |
| ECTSA319 | LIGHT BAR BUNDLE 5 FT STANDARD | 1 | |
| ECTSA319UK | LIGHT BAR BUNDLE 5FT-STANDARD | 1 | |
| ED-TB-AL | EDDY CURRENT STANDARD | 1 | |
| ED-TB-CS | EDDY CURRENT STANDARD | 1 | |
| ED-TB-TI | EDDY CURRENT STANDARD | 1 | |
| EDM NOTCH(0.030INCH DEEP,0.005 INCH WIDE,0.060 INCH LONG ) IN DIRECTION OF CIRCUMFERENCE | ALUMINIUM REFERENCE STANDARD(USED FOR WHEEL GOODRICH PART NO. 3-1423-1,-2 ) | 1 | |
| EEBC500B-INT | STANDARD NATO BATTERY CHARGER | 1 | |
| EEBM4BANK-1 | ONE 6FT STANDARD CABLE/CLAMPS | 1 | |
| EECTBOOT | BLACK BOOT STANDARD | 1 | |
| EECTBOOTR | RED BOOT STANDARD | 1 | |
| EECTCLIP | COPPER CLIP STANDARD | 1 | |
| EEFI5002 | STANDARD SCHRADER HOSE ASEMBLY | 1 | |
| EELD302A2 | EVAP PORT ADAPT,STANDARD | 1 | |
| EI1566 | METERING EQUIPMENT-BIOCIDE-STANDARD EI1566 | 1 | |
| EKA 3205313781 | STANDARD TOOL | 2 | |
| EKA3205313791 | STANDARD TOOL | 2 | |
| EKA330533226-3 | STANDARD TOOL TOOLD07 | 1 | |
| ELHFSET | HOLE FILDER KIT, 5PC 13-1/2" STANDARD BUSHING | 1 | |
| EM145NDI540043A | EMBRAER REFERENCE STANDARD 54-50-00 PT 2 FIG 606 | 1 | |
| EM145NDI540047A | EMBRAER REFERENCE STANDARD 54-50-00 PT 2 FIG 615 | 1 | |
| EM8000E-ENC | EM8000E-ENC;MTS-8000E V2 Mainframe with Standard Power | 1 | |
| EMB-CFD | STANDARD FUNNEL | 1 | |
| EMB170-175-NDT4195 | REFERENCE STANDARD, EMB | 1 | |
| EO13829.001/1 | Aeronautical Engineers Australia Reference Standard Fig.2 Page 5 DOC NO: MMS13829.001/1 and REF EO: EO13829.001/1 | 1 | |
| EO8199-4F | CALIBRATION TEST STANDARD, DASH8 | 1 | |
| EOTDRV2-STD | EOTDRV2-STD;EOTDR V2 STANDARD CONFIGURATION | 1 | |
| ESRX.187-.250 | Adjustable X Type probe for Rohmann Standard Rotor, .187"-.250", 100KHz-2MHz | 1 | |
| ESRX.250-.312 | Adjustable X Type probe for Rohmann Standard Rotor, .250"-.312", 100KHz-2MHz | 1 | |
| ESRX.312-.375 | Adjustable X Type probe for Rohmann Standard Rotor, .312"-.375", 100KHz-2MHz | 1 | |
| ESRX.375-.437 | Adjustable X Type probe for Rohmann Standard Rotor, .375"-.437", 100KHz-2MHz | 1 | |
| ESRX.437-.500 | Adjustable X Type probe for Rohmann Standard Rotor, .437"-.500", 100KHz-2MHz | 1 | |
| ESRX.500-.625 | Adjustable X Type probe for Rohmann Standard Rotor, .500"-.625", 100KHz-2MHz | 1 | |
| ESRX.625-.750 | Adjustable X Type probe for Rohmann Standard Rotor, .625"-.750", 100KHz-2MHz | 1 | |
| ESRX.750-.875 | Adjustable X Type probe for Rohmann Standard Rotor, .750"-.875", 100KHz-2MHz | 1 | |
| ESRX.875-1.0 | Adjustable X Type probe for Rohmann Standard Rotor, .875"-1.0", 100KHz-2MHz | 1 | |
| ESRX1.0-1.125 | Adjustable X Type probe for Rohmann Standard Rotor, 1.0"-1.125", 100KHz-2MHz | 1 | |
| ESRX1.125-1.25 | Adjustable X Type probe for Rohmann Standard Rotor, 1.125"-1.25", 100KHz-2MHz | 1 | |
| ESRX1.250-1.375 | Adjustable X Type probe for Rohmann Standard Rotor, 1.250-1.375", 100KHz-2MHz | 1 | |
| ESRX12-15M/60WL | Adjustable X Type probe for Rohmann Standard Rotor, 12-15mm, 60mm WL, 100KHz-1MHz | 1 | |
| ESRY 40-55M | ELOTEST Standard Rotor Y Probe, 40-55mm Diameter, 100Khz-2Mhz | 1 | |
| ESRY 5-6.5M | ELOTEST Standard Rotor Y Probe, 5-6.5mm Diameter, 100Khz-2Mhz | 1 | |
| ESRY.125-.187 | ELOTEST Standard Rotor Y Probe, .125-.187 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.156-.187 | ELOTEST Standard Rotor Y Probe, .156-.187 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.187-.250 | ELOTEST Standard Rotor Y Probe, .187-.250 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.250-.312 | ELOTEST Standard Rotor Y Probe, .250-.312 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.312-.375 | ELOTEST Standard Rotor Y Probe, .312-.375 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.375-.437 | ELOTEST Standard Rotor Y Probe, .375-.437 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.437-.500 | ELOTEST Standard Rotor Y Probe, .437-.500 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.500-.625 | ELOTEST Standard Rotor Y Probe, .500-.625 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.625-.750 | ELOTEST Standard Rotor Y Probe, .625-.750 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.750-.875 | ELOTEST Standard Rotor Y Probe, .750-.875 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.875-1.0 | ELOTEST Standard Rotor Y Probe, .875-1.0 Diameter, 100Khz-2Mhz | 1 | |
| ESRY1.0-1.125 | ELOTEST Standard Rotor Y Probe,1.0-1.125 Diameter, 100Khz-2Mhz | 1 | |
| ESRY1.500-1.625 | ELOTEST Standard Rotor Y Probe, 1.500- 1.625 Diameter, Shielded..100Khz-2Mhz | 1 | |
| ESRY1.625-1.750 | ELOTEST Standard Rotor Y Probe, 1.625- 1.750 Diameter, Shielded..100Khz-2Mhz | 1 | |
| ET-55C-1-2024T3 | 10 Step Standard, .0254-.0575 | 1 | |
| ET-55C-1-2024T42 | 10 Step Standard, .0254-.0575 | 1 | |
| ET.28 | Bombardier Bolt hole and surface crack reference standard 6061-T6, 15 Holes, .030 Midwall notches top plate, (2) .030 corner notches each hole on the bottom plate. .008, .020, .030 surface notches | 1 | |
| ET002 | Brantly International B-2 Main Rotor Blade root skin inspection Fig1 calibration standard | 1 | |
| ET6018 | CUSTOM SIKORSKY S61-N FLAT BOTTOM HOLE AFT REAR FUSELAGE REFERENCE STANDARD 51-10-05 FIGURE 7 (SHEETS 1-5). MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certiicate of Conformance. | 1 | |
| ET88-SRM NDT 7-5 | DC9/MD80 7-5 Standard, PG31 FIG21 SHEET1 | 1 | |
| ETBS AL-1T/2024-T3 0.032 | MD REFERENCE STANDARD ETFL PROCEDURE 5 06-10-02 | 1 | |
| ETD2015-145-108529 | CUSTOM EDDY CURRENT STANDARD, 2024-T351 ALUMINUM .063"/.050". MS20426AD5 CSK RIVET 2 PLACES | 1 | |
| EX601R47015-001 | REF STANDARD PIANO HUGE | 1 | |
| EX601R47015−001 | Calibration reference standard − piano hinge passenger door (Bombardier Inc.) | 1 | |
| EX601R51086-001 | CALIBRATION REFERENCE STANDARD | 1 | |
| EX601R51093 | Calibration reference standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EX604-60024 | CRJ700/900/1000 Calibration Standard PT6 53-11-108 PG19 FG4 | 2 | |
| EX604-60024-001 | CALIBRATION REFERENCE STANDARD | 1 | |
| EX604−60024 | Calibration reference standard multi−layered aluminum alloy fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 2 | |
| EX605 60034 001 | CRS CALIBRATION STANDARD | 1 | |
| EX605 60036 001 | CRS CALIBRATION STANDARD | 1 | |
| EX605-60037-001 | REFERENCE STANDARD UT | 1 | |
| EX605−60037−001 | CALIBRATION REFERENCE STANDARD MADE FROM | 1 | |
| EXBC100-59009-001 | CALIBRATION REFERENCE STANDARD | 1 | |
| EXBC670-59040-005 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 3.000 IN. (76.20 MM)OUTSIDE DIAMETER 1.563 IN. (39.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−001 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 4.224 IN. (107.29 MM)OUTSIDE DIAMETER 2.311 IN. (58.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−003 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 3.374 IN. (85.70 MM)OUTSIDE DIAMETER 2.311 IN. (58.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−007 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.000 IN. (50.80 MM)OUTSIDE DIAMETER 1.032 IN. (26.21 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−009 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.000 IN. (50.80 MM)OUTSIDE DIAMETER 1.332 IN. (33.83 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−011 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.500 IN. (63.50 MM)OUTSIDE DIAMETER 1.563 IN. (39.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−013 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.500 IN. (63.50 MM)OUTSIDE DIAMETER 1.332 IN. (33.83 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59045 | PART06 53-11-103 FIG. 4 REFERENCE STANDARD | 1 | |
| EXBC670-59046 | CALIBRATION REFERENCE STANDARD ASSEMBLY ALUMINUM ALLOY CONTAINS 0.250 IN. (6.35 MM) LONG ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59066-001 | CALIBRATION REFERENCE STANDARD CONTAINS 0.250 IN | 1 | |
| EXBC670-59066−001 | CALIBRATION REFERENCE STANDARD CONTAINS 0.250 IN (6.35 MM) LONG0.005 IN. (0.127 MM) WIDE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59089-001 | CALIBRATION REFERENCE STANDARD SIMILAR IN MATERIAL AS THE INSPECTION AREA CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ) | 1 | |
| EXBC670-59089−001 | CALIBRATION REFERENCE STANDARD SIMILAR IN MATERIAL AS THE INSPECTION AREA CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59133 | CALIBRATION REFERENCE STANDARD MADE FROM ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59141 | CALIBRATION REFERENCE STANDARD MULTI LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59142 | CALIBRATION REFERENCE STANDARD MADE FROM ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59143-001 | CALIBRATION REFERENCE STANDARD, ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES. (MHIRJ) | 1 | |
| EXBC670-59145 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59148 | CALIBRATION REFERENCE STANDARD (CRS) MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670-59156 | CALIBRATION REFERENCE STANDARD MADE FROM MULTIPLE ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59157-003 | CALIBRATION REFERENCE STANDARD, MULTIPLE LAYERED FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXBC670-59158 | CALIBIRATION STANDARD | 1 | |
| EXBC670-59159 | CALIBRATION REFERENCE STANDARD(CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM)NOTCHES (MHIRJ). | 1 | |
| EXBC670-59160 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERED FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EXBC670-59161 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59162 | CALIBRATION REFERENCE STANDARD, ALUMINUM ALLOY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCH. (MHIRJ OR EQUIVALENT) | 1 | |
| EXBC670-59163 | CALIBRATION REFERENCE STANDARD TITANIUM ALLOY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCH. (BOMBARDIER INC.EQUIVALENT) | 1 | |
| EXBC670-59164 | CALIBRATION REFERENCE STANDARD MULTIPLE LAYERS ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59174 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59174-001 | CALIBRATION REFERENCE STANDARD | 1 | |
| EXBC670-59176 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59177 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59178 | CALIBIRATION STANDARD | 1 | |
| EXBC670-59179 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 1 | |
| EXBC670-59180 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59181 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670-59182 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 1 | |
| EXBC670-59182-001FS | CALIBRATION REFERENCE STANDARD | 1 | |
| EXBC670-59183-001 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) TRANSDUCER - ANGLE BEAM, 5.0 MHZ, 0.375 IN. (9.53 MM) H X | 1 | |
| EXBC670-59185 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EXBC670−59040−001 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 4.224 in. (107.29 mm)outside diameter 2.311 in. (58.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−003 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 3.374 in. (85.70 mm)outside diameter 2.311 in. (58.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−005 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 3.000 in. (76.20 mm)outside diameter 1.563 in. (39.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−007 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.000 in. (50.80 mm)outside diameter 1.032 in. (26.21 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−009 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.000 in. (50.80 mm)outside diameter 1.332 in. (33.83 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−011 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.500 in. (63.50 mm)outside diameter 1.563 in. (39.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−013 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.500 in. (63.50 mm)outside diameter 1.332 in. (33.83 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59044 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59045 | Calibration reference standard assembly aluminum alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59046 | Calibration reference standard assembly aluminum alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59065 | Calibration reference standard assembly aluminum and steel alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier inc.) | 1 | |
| EXBC670−59066−001 | Calibration reference standard contains 0.250 in (6.35 mm) long0.005 in. (0.127 mm) wide electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59068 | Calibration reference standard multiple layered assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59089−001 | Calibration reference standard similar in material as the inspection area containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59094 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59098 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59099 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59101 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59125 | Calibration reference standard assembly contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59133 | Calibration reference standard made from aluminum alloy containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59134 | Calibration reference standard aluminum alloy that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59139−001 | Calibration reference standard made from aluminum alloy that contains electrical discharge machined notches (Bombardier inc.) | 1 | |
| EXBC670−59141 | Calibration reference standard multi layers fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59142 | Calibration Reference Standard made from aluminum alloy containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59143 | Calibration Reference Standard assembly that contains electrical discharge machined notches. (Bombardier Inc.) | 1 | |
| EXBC670−59145 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59148 | Calibration Reference Standard (CRS) multiple layers fastened assembly that contains electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59153 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59154 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59156 | Calibration Reference Standard made from multiple aluminum alloy containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59157 | Calibration reference standard multiple layered fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59158 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | 1 | |
| EXBC670−59159 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | 1 | |
| EXBC670−59161 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59162 | Calibration Reference Standard aluminum alloy that contains electrical discharge machined notch. (Bombardier Inc. or equivalent) | 1 | |
| EXBC670−59163 | Calibration Reference Standard titanium alloy that contains electrical discharge machined notch. (Bombardier Inc. or equivalent) | 1 | |
| EXBC670−59164 | Calibration Reference Standard multiple layers assembly that contains electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59174 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59176 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59177 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59178 | Calibration reference standard multiple layer fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59180 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59181 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBD 400-500-013 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD 400-50040 | CALIBRATION TEST STANDARD (CTS), | 1 | |
| EXBD 400−50040 (1) | CALIBRATION TEST STANDARD FOR ULTRASONIC INSPECTION | 1 | |
| EXBD300-50041 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD40-50013-011 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| EXBD400-500-40-001 | CALIBRATION STANDARD | 3 | |
| EXBD400-5001-013 | CALIBRATION STANDARD | 1 | |
| EXBD400-50013-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50013-003 | Calibration Standard, 2024-T3 Clad, NAS1097AD4 Rivets, Paint.. | 1 | |
| EXBD400-50013-005 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50013-011 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50013-013 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50013−011 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| EXBD400-50013−013 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50023 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50023-001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50027-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50040 | CALIBRATION TEST STANDARD FOR ULTRASONIC INSPECTION (DHC) | 1 | |
| EXBD400-50040-001 | CALIBRATION STANDARD | 3 | |
| EXBD400-50047-001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50051-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50051-003 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50051−003 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50067-001 | CALIBRATION TEST STANDARD (CTS), | 1 | |
| EXBD400-50068-101 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50068-103 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50068-105 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50069-001 | CALIBRATION STANDARD | 1 | |
| EXBD400-50069-003 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50069-004 | NDT CALIBRATION STANDARD | 1 | |
| EXBD400-50071-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50072-001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50073-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50074-001 | CALIBRATION TEST STANDARD(CTS) | 2 | |
| EXBD400-50077 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50077-001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50077−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50078-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50078-003 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50078-103 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50078-105 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50078-109 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50078-111 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50093-005 | CALIBRATION TEST STANDARD (CTS), | 1 | |
| EXBD400-50093−003 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50094−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50102-001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50102−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50103 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50103-001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50104−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50111 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50111-001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50112 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50112-001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50113 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50113-001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50122−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50124−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50151-003 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50151-007 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50152-001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50152-007 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50156-001 | CALIBRATION TEST STANDARDS CTSS | 1 | |
| EXBD400-50156-002 | CALIBRATION TEST STANDARDS CTSS | 1 | |
| EXBD400-50162-001 | CALIBRATION STANDARD | 1 | |
| EXBD400-50163-001 | CALIBRATION STANDARD | 1 | |
| EXBD400-51325- 101 | CALIBRATION TEST STANDARD | 2 | |
| EXBD400-51325-001 | BLOCK, TEST STANDARD | 1 | |
| EXBD400-51325-101 | CALIBRATION TEST STANDARD | 2 | |
| EXBD400-53070-001 | CALIBRATION TEST STANDARD(CTS) | 2 | |
| EXBD400-53081-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-54004-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-54006-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-54008−001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-54009-001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-54009−001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-54010-003 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-54010−001 | CALIBRATION TEST STANDARD1 | 1 | |
| EXBD400-54010−003 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-54011−001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-80003 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| EXBD400-80005 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| EXBD400−50013−011 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| EXBD400−50047−001 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| EXBD400−50051−003 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50077 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50077−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50093−003 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50094−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50102−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50103 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50104−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50111 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50112 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50113 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50122−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50124−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−51325−101 | CALIBRATION TEST STANDARD (CTS) | 2 | |
| EXBD400−53085−003 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400−53087−001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400−54008−001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400−54009−001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400−54010−001 | CALIBRATION TEST STANDARD1 | 1 | |
| EXBD400−54010−003 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400−54011−001 | CALIBRATION TEST STANDARD | 1 | |
| EXCH690-31022 | TEST STANDARD | 1 | |
| EXCM601R30014 | CALIBRATION STANDARD | 1 | |
| EXCM601R30038 | REFERENCE STANDARD (CRJ200) | 1 | |
| EXDB400−50093−005 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXGC926-7008-0 | CALIBRATION STANDARD | 1 | |
| EXGC926-7008-001 | CALIBRATION STANDARD ASSY | 2 | |
| EXGC926-7011-001 | CALIBRATION STANDARD ASSY | 1 | |
| EXSH670-31001-1 | CALIBRATION REFERENCE STANDARD, STGR15R BUTT JOINT, CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ) | 1 | |
| EXSH670-31001−1 | CALIBRATION REFERENCE STANDARD STGR15R BUTT JOINT CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH670-31002-1 | CALIBRATION REFERENCE STANDARD STGR1L AND STGR20L BUTT JOINTS CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH670-31011−1 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH670-35910-1 | CALIBRATION REFERENCE STANDARD, ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES | 1 | |
| EXSH670-35910−1 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES | 1 | |
| EXSH670−31001−1 | Calibration reference standard STGR15R butt joint contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH670−31002−1 | Calibration reference standard STGR1L and STGR20L butt joints contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH670−31011−1 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH670−31014−1 | Calibration reference standard pressure bulkhead machined frames FS693.00 and FS847.00 contains subsurface electrical discharge machined notches. (Bombardier Inc.) | 1 | |
| EXSH670−35910−1 | Calibration Reference Standard assembly that contains electrical discharge machined notches | 1 | |
| EXSH690-31003−11 | CALIBRATION REFERENCE STANDARD EMERGENCY EXIT DOOR SURROUND STRUCTURE CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH690-31022 | CALIBRATION REFERENCE STANDARD POTABLE WATER. | 1 | |
| EXSH690-31023-1 | CALIBRATION REFERENCE STANDARD, CIRCUMFERENTIAL SKIN JOINT STGR7 TEST PIECE, CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXSH690-31023−1 | CALIBRATION REFERENCE STANDARD CIRCUMFERENTIAL SKIN JOINT STGR7 TEST PIECE CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH690−31003−11 | Calibration reference standard emergency exit door surround structure contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH690−31022 | Calibration reference standard potable water. | 1 | |
| EXSH690−31023−1 | Calibration reference standard circumferential skin joint STGR7 test piece contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH698-31024-1 | CALIBRATION REFERENCE STANDARD | 1 | |
| EYEBOLTS, PLAIN, 1/2-UNC, GRAD | EYEBOLTS, PLAIN, 1/2-UNC, GRADE 8 STANDARD | 1 | |
| EddyFi Array Probe (Standard) | EddyFi Array Probe (Standard) | 1 | |
| F-80 | 3/8" DRIVE DUAL TECHNOLOGY STANDARD HANDLE RATCHET | 3 | |
| F12-DEL-3C1N | REPAIR REFERENCE STANDARD GR/EP FIBERGLASS STEP DELAM DEFECT. ALL BOEING AIRCRAFT MODELS PART 1 51-01-01. Includes C-SCAN Certification and Certificate of Conformance. | 1 | |
| F12-DIS-3C1N | REPAIR REFERENCE STANDARD GR/EP FIBERGLASS STEP DISBOND and CORE FIBERGLASS INTERFACE. ALL BOEING AIRCRAFT MODELS PART 1 51-01-01. Includes C-SCAN Certification and Certificate of Conformance. | 1 | |
| F12-PCS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 12PLY FIBERGLASS, (PCS) POTTING AND CORE SPLICE | 1 | |
| F12-POT-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 12PLY FIBERGLSS, (POT) SKIN TO POTTING DISBONDS | 1 | |
| F121 | SOCKET STANDARD | 3 | |
| F141 | SOCKET STANDARD | 3 | |
| F15-AL-UT-0 125 | F15 REFERENCE STANDARD, 2124-T821, 1F-15A-36-2-65 | 1 | |
| F15-AL-UT-0 175 | F15 REFERENCE STANDARD, 2124-T821, 1F-15A-36-2-65 | 1 | |
| F15-AL-UT-0 225 | F15 REFERENCE STANDARD, 2124-T821, 1F-15A-36-2-65 | 1 | |
| F15-AL-UT-0 275 | F15 REFERENCE STANDARD, 2124-T821, 1F-15A-36-2-65 | 1 | |
| F15-AL-UT-0.175-2 | F15 REFERENCE STANDARD. MATERIAL: 2024-T3, OUTBOARD TORQUE BOX REAR SPAR, 68A115101, LOWER FLANGE FASTENER HOLES. Includes Test Report and Certificate of Conformance. | 1 | |
| F15-TI-UT-.175 | F15 REFERENCE STANDARD,6AL-4V 1F-15A-36 | 1 | |
| F15-TI-UT-0.175 | F15 REFERENCE STANDARD,6AL-4V | 1 | |
| F161 | SOCKET STANDARD | 4 | |
| F181 | SOCKET STANDARD | 3 | |
| F201 | SOCKET STANDARD | 3 | |
| F221 | SOCKET STANDARD | 2 | |
| F24-DEL-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | 1 | |
| F24-DIS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | 1 | |
| F24-PCS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | 1 | |
| F24-POT-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | 1 | |
| F241 | SOCKET STANDARD | 3 | |
| F261 | SOCKET STANDARD | 2 | |
| F70199-6 | Air Chuck - Standard Bore | 9 | |
| F70308 | STANDARD TAG -0 SUPPORT EQUIPMENT | 1 | |
| F70308-24 | STANDARD TAG-SUPPORT EQUIPMENT | 5 | |
| F70313-1 | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-2 | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-2/ 36"×24 | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-2/ 36"×24"×12" | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-2/32"×28"×12" | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-2/36"×24"×12" | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-3 | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-4 | STANDARD BOX - SUPPORT EQUIPMENT | 3 | |
| F70313-5 | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-6 | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F72059-8 | WRENCH AN STANDARD | 1 | |
| F72059-9 | WRENCH AN STANDARD | 1 | |
| F72913-10 | SLEEVE-MLG AXLE PROTEct STANDARD AXLE | 14 | |
| F72913-11 | CAP, THREAD PROTECTOR MLG (STANDARD) | 32 | |
| F72913-8 | SLEEVE, AXLE PROTECTOR MLG (STANDARD) | 27 | |
| F729589-31 | SPANNER WRENCH AN STANDARD TYPE | 1 | |
| F72959 | Spanner Wrench AN Standard Type | 11 | |
| F72959-1 | Spanner Wrench - AN Standard Type | 8 | |
| F72959-1 thru -12 | All Standard Type - Spanner Wrench | 1 | |
| F72959-10 | Spanner Wrench - AN Standard Type | 4 | |
| F72959-11 | Spanner Wrench - AN Standard Type | 4 | |
| F72959-12 | Spanner Wrench - AN Standard Type | 4 | |
| F72959-13 | SPANNER WRENCH AN STANDARD TYPE | 4 | |
| F72959-14 | SPANNER WRENCH AN STANDARD TYPE | 3 | |
| F72959-15 | SPANNER WRENCH AN STANDARD TYPE | 1 | |
| F72959-2 | Spanner Wrench - AN Standard Type | 3 | |
| F72959-3 | Spanner Wrench - AN Standard Type | 3 | |
| F72959-31 | Spanner Wrench - AN Standard Type | 9 | |
| F72959-31 thru -42 | All Standard Type - Spanner Wrench | 1 | |
| F72959-31PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-32 | Spanner Wrench - AN Standard Type | 9 | |
| F72959-32PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-33 | Spanner Wrench - AN Standard Type | 10 | |
| F72959-33PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-34 | Spanner Wrench - AN Standard Type | 10 | |
| F72959-34PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-35 | Spanner Wrench - AN Standard Type | 11 | |
| F72959-36 | Spanner Wrench - AN Standard Type | 12 | |
| F72959-36PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-37 | Spanner Wrench - AN Standard Type | 9 | |
| F72959-37PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-38 | Spanner Wrench - AN Standard Type | 11 | |
| F72959-38PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-39 | Spanner Wrench - AN Standard Type | 9 | |
| F72959-39PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-4 | Spanner Wrench - AN Standard Type | 7 | |
| F72959-40 | Spanner Wrench - AN Standard Type | 23 | |
| F72959-41 | Spanner Wrench - AN Standard Type | 13 | |
| F72959-41PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-42 | Spanner Wrench - AN Standard Type | 9 | |
| F72959-42PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-5 | Spanner Wrench - AN Standard Type | 4 | |
| F72959-6 | Spanner Wrench - AN Standard Type | 3 | |
| F72959-7 | Spanner Wrench - AN Standard Type | 5 | |
| F72959-8 | Spanner Wrench - AN Standard Type | 4 | |
| F72959-9 | Spanner Wrench - AN Standard Type | 4 | |
| F72959-X | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-XX | Spanner Wrench -An Standard Type | 1 | |
| F7295940 | SPANNER WRENCH - AN STANDARD TYPE | 23 | |
| F80 | RACHET 3/8”INCH DRIVE STANDARD HANDLE | 3 | |
| F80FOD | 3/8" DR TECHNOLOGY STANDARD HANDLE RATCHET | 1 | |
| F80 | (3/8")DRIVE STANDARD HANDLE RATCHET | 3 | |
| F830 | STANDARD RATCHET | 1 | |
| F872 | HANDLE SOCKET WRENCH RATCHET STANDARD | 1 | |
| FA7E | SOCKET DRIVER, HEX, STANDARD 7/32 ENCAIXE 3/8" | 2 | |
| FA7E2 | BIT, HEX, STANDARD, 7/32" | 1 | |
| FAM5E | 3/8" DRIVE METRIC 5MM STANDARD HEX BIT SOCKET DRIV | 1 | |
| FAS5059 | C0NDUCTIVITY STANDARDS 1.041 | 1 | |
| FAS5060 | CONDUCTIVITY STANDARD 9.563 | 1 | |
| FAS5061 | CONDUCTIVITY STANDARD 29.65 | 1 | |
| FAS5062 | CONDUCTIVITY STANDARD 32.25 | 1 | |
| FAS5063 | CONDUCTIVITY STANDARD 59.69 | 1 | |
| FAS5064 | CONDUCTIVITY STANDARD 100.15 | 1 | |
| FB2400-S | STANDARD PACKAGE FOD | 1 | |
| FB70-010-1B | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (FRANK BROWN) | 2 | |
| FB70-077-200 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (FRANK BROWN) | 8 | |
| FBPP-BAP1 | FBPP-BAP1;BARREL ASSEMBLY FOR PROBE STANDARD CONFIGURATION--REV001 | 1 | |
| FC34B | STANDARD FIXED KEY | 3 | |
| FDI-C7009 | FLOW TRANSFER STANDARD | 1 | |
| FEN06 | STANDARD TRIPOD-JACK SET A320 FAMILY INCL. NEO - TAIL | 1 | |
| FEN06A21 | HYDRO Standard A320 Family Tail Tripod Jack | 2 | |
| FEN10 | STANDARD TRIPOD-JACK SET A320 FAMILY INCL. NEO - NOSE | 1 | |
| FEN10A21 | HYDRO Standard A320 Family Nose Tripod Jack | 2 | |
| FEN121 | STANDARD B737 TAIL TRIPOD JACK | 1 | |
| FEN121A2 | HYDRO STANDARD B737 TAIL TRIPOD JACK | 1 | |
| FEN121A21 | HYDRO Standard B737 Tail Tripod Jack | 2 | |
| FEN122A21 | HYDRO Standard B737 Nose Tripod Jack | 2 | |
| FEN351 | STANDARD TRIPOD-JACK SET A320 FAMILY INCL. NEO - WING | 1 | |
| FEN351A21 | HYDRO Standard A320 Family Wing Tripod Jack | 2 | |
| FEN352A21 | HYDRO Standard B737 Wing Tripod Jack | 2 | |
| FF171-5234 | BOEING REFERENCE STANDARD. MATERIAL: 6AL-4V TITANIUM ROUND 2.50" DIAMETER O.D. / 1.125" DIAMETER I.D. EDM CORNER NOTCH: .030" x .030" +0.00/-0.002 WIDE | 1 | |
| FG-M6ADP | ADAPTER STANDARD SET FOR RGANGE 2-200 LB | 1 | |
| FH80 | Ratchet, Dual 80™ Technology Comfort Handle, Standard Length, 3/8" drive, 9 9/16" | 3 | |
| FLIR-T640 | THERMAL IMAGER HAND HELD STANDARD MODEL T640 WITH 25 X 19 LENS , 640 X 480 PIXELS ,30 HZ MSX TECHNOLOGY & BUILT IN VISUAL CAMERA | 1 | |
| FLUKE 289 | STANDARD MULTIMETER | 16 | |
| FLUKE 5540A | SPEC / 5540A STANDARD MULTI-PRODUCT CALIBRATOR | 1 | |
| FN100 | HANDLE SOCKET WRENCH RATCHET STANDARD | 2 | |
| FOKKER-50/60 | FOKKER 50/60 CALIBRATION STANDARD PART 6 53-30-09 PAGE 6 FIGURE 3. MATERIAL: 2024-T3 ALUMINUM. NOTE: ***DOES NOT INCLUDE 3M BELLY PROTECTIVE TAPE 8641 | 1 | |
| FP22E2 | #2 PHILLIPS® STANDARD DRIVER BIT | 1 | |
| FP32A | 3/8" DRIVE #3 PHILLIPS® STANDARD BIT SOCKET DRIVER | 1 | |
| FP32E | 3/8" DRIVE #3 PHILLIPS STANDARD BIT SOCKET DRIVER | 1 | |
| FP32E2 | #3 PHILLIPS STANDARD DRIVER BIT | 1 | |
| FP41E | 3/8" DRIVE #4 PHILLIPS STANDARD BIT SOCKET DRIVER | 2 | |
| FRDH141 | 3/8" Drive 12-Point SAE 7/16" Standard Torque Adaptor | 12 | |
| FRDH161 | TORQUE ADAPTER 1/2 - 3/8" DRIVE 12-POINT SAE 1/2" STANDARD TORQUE ADAPTER | 2 | |
| FRDH181 | 3/8" DRIVE 12-POINT SAE 9/16" STANDARD TORQUE ADAPTOR | 3 | |
| FRDH201 | 5/8" STANDARD TORQUE ADAPTOR 12-POINT | 1 | |
| FRDH221 | 11/16" STANDARD TORQUE ADAPTOR 12-POINT | 2 | |
| FRDH241 | 3/4" STANDARD TORQUE ADAPTOR 12-POINT | 1 | |
| FS725 | RUBIDIUM FREQUENCY STANDARD FS725 | 1 | |
| FSC1 | REF STANDARD | 1 | |
| FTIA3205313781 | STANDARD TOOL | 1 | |
| FTIA3205313791 | STANDARD TOOL | 1 | |
| FULL-STD-1 | FULL-STD-1;1yr. Renewal Standard Full Maintenance Contract Existing Equipment | 1 | |
| FW1/4-SS18-8 | FLAT WASHER STANDARD 1/4 DIA STAINLESS | 1 | |
| G01J3P3 | KIT, CRIMP TOOL - ELECTRICAL CONNECTOR REF FOUND IN STANDARD WIRE PRACTICES MANUAL (SWPM) (GRAPHIC DATAKITS INTERNATIONAL (6495 CORP.)) | 1 | |
| G11-STD 1-4 | Phenolic solid laminate standard | 1 | |
| G11-STD-1 | G11 PHENOLIC (GAROLITE) Reference Standard, SAE ARP5605, .007 THRU .050 FBH (REMAINING THICKNESS) | 1 | |
| G11-STD-2 | G11 PHENOLIC (GAROLITE) Reference Standard, SAE ARP5605, .060 THRU .180 FBH (REMAINING THICKNESS) | 1 | |
| G11-STD-3 | G11 PHENOLIC (GAROLITE) Reference Standard, SAE ARP5605, .220 THRU .450 FBH (REMAINING THICKNESS) | 1 | |
| G11-STD-4 | G11 PHENOLIC (GAROLITE) Reference Standard, SAE ARP5605, .500 THRU 1.00 FBH (REMAINING THICKNESS) | 1 | |
| G601R572101-1 | CALIBRATION STANDARD - EDDY CURRENT INSPECTION (4777 CYCLES) | 1 | |
| G601R572101−1 | Calibration Standard − Eddy Current Inspection (4777 cycles) | 1 | |
| G704B | G704B CHERRYMAX® POWER RIVETER STANDARD MODEL-RIVETER ONLY ( STROKE: .510" )( PULLING FORCE: 3,100 LBS (1,406 KGS) )( DESCRIPTION: RIVETER ONLY ) | 10 | |
| GA0002859-NH | NITROGEN HOSE 8M WITH STANDARD CONNECTOR | 1 | |
| GB704RK | Gage Bilt Standard PowerMAX Installation Kit | 1 | |
| GCA580 | ADAPTOR US STANDARD CONNECTION | 1 | |
| GE-FQAP-112 | CALIBRATION STANDARD | 1 | |
| GENERAL BLOCK 29A032 | TITANIUM REFERENCE STANDARD 3 EDM CUT DEPTH 0.2 MM, 0.5 MM AND 1MM WITH WIDTH 0.05 MM – 0.25 MM | 1 | |
| GENERAL BLOCK 29A49 | STEEL REFERENCE STANDARD 3 EDM CUT DEPTH 0.2 MM, 0.5 MM AND 1MM WITH WIDTH 0.05 MM – 0.25 MM | 1 | |
| GENIE SLA25 | SUPERLIFT ADVANTAGE STANDARD BASE MATERIAL LIFT | 2 | |
| GLF-000 | CANOPY/NOSE COVER, H-201 Standard Libelle, all year use | 1 | |
| GLOVE310L | GLOVE 4X STANDARD LG | 1 | |
| GLOVE310M | GLOVE 4X STANDARD MD | 1 | |
| GLOVE310XL | GLOVE 4X STANDARD XL | 1 | |
| GLOVE310XX | GLOVE 4X STANDARD XXL | 1 | |
| GMIHB015015-1Z-2 | STANDARD FLEXIBLE BLANKET 15X15CM 1 ZONE - 230V | 1 | |
| GMIHB020020-1Z-2 | STANDARD BLANKETS | 1 | |
| GMIHB025025-1Z-2 | STANDARD BLANKETS RECTANGULAR 25X25 CM | 1 | |
| GMIHB040-1Z-2 | STANDARD HEATING BLANKET ROUND DIAM 40CM, 230V | 1 | |
| GMIHB040040-1Z-2 | STANDARD BLANKETS | 1 | |
| GMIHB040050-1Z-2 | STANDARD BLANKETS RECTANGULAR 30X50 CM | 1 | |
| GMIHB040060-1Z-2 | STANDARD BLANKETS RECTANGULAR 40X60 CM | 1 | |
| GOEX722K | 22 PC 12-POINT SAE FLANK DRIVE® STANDARD COMBINATION WRENCH SET (5/16-1-5/8") | 3 | |
| GPKIT-5 | 5 Piece Rivet Gun Punch Kit - Standard Length - MADE IN THE USA! | 1 | |
| GPS3044M | 3/4IN DRIVE X 44MM STANDARD | 1 | |
| GPS3050M | 3/4IN DRIVE X 50MM STANDARD | 1 | |
| GPS3078R | 3/4IN DR X 2-7/16IN STANDARD | 1 | |
| GPS3080R | 3/4IN DR X 2-1/2IN STANDARD | 1 | |
| GPS3082R | 3/4IN DR X 2-9/16IN STANDARD | 1 | |
| GPS3084R | 3/4IN DR X 2-5/8IN STANDARD | 1 | |
| GPS3086R | 3/4IN DR X 2-11/16IN STANDARD | 1 | |
| GPS3088R | 3/4IN DR X 2-3/4IN STANDARD | 1 | |
| GPS3090R | 3/4IN DR X 2-13/16IN STANDARD | 1 | |
| GPS3092R | 3/4IN DR X 2-7/8IN STANDARD | 1 | |
| GPS3094R | 3/4IN DR X 2-15/16IN STANDARD | 1 | |
| GPS3096R | 3/4IN DR X 3IN STANDARD | 1 | |
| GPS3530S | 3/4"DR X 15/16" STANDARD 8PT | 1 | |
| GPS4040M | 1"DR X 40MM STANDARD | 1 | |
| GS15047-1 | Valve Test Fixture Hamilton Standard | 13 | |
| GS19818-1 | ADAPT PISTON RETAINING NUT TO A STANDARD TORQUE WRENCH | 5 | |
| GS19820-1 | ADAPT THE PITCHLOCK NUT TO A STANDARD TORQUE WRENCH | 2 | |
| GS19822-1 | ADAPT THE PISTON RETAINING NUT TO A STANDARD TORQUE WRENCH | 2 | |
| GS2-612 | STANDARD GRIP SCALE | 1 | |
| GS20841-1 | ADAPT THE PISTON RETAINING NUT TO A STANDARD TORQUE WRENCH | 1 | |
| GS23663 | REFERENCE STANDARD | 1 | |
| GS24067-1 | ULTRASONIC REFERENCE STANDARD | 1 | |
| GS24099-1 | INSPECTION STANDARD | 1 | |
| GS4MT | TOOL - INSTALLATION - HAND OPERATED - INSTALLS STANDARD .18", LIGHT-HEAVY .25", AND HEAVY .31" CROSS SECTION TIES | 7 | |
| GSB0900002 | TOWBAR, STANDARD MULTI-HEAD | 1 | |
| GSB1000014 | COVER-MAIN LANDING WHEEL (STANDARD TIRES) | 1 | |
| GSB1000017 | COVER-NOSE LANDING WHEEL (STANDARD TIRES) | 1 | |
| GSB2840008C | SET - HARNESS ADAPTER Q100, 200, 300, METRIC, STANDARD RANGE | 2 | |
| GSB5180003 | Calibration Standard | 1 | |
| GSB5500001 | REFERENCE STANDARD NDT TOOL | 1 | |
| GSE 206 | Calibration Standard, Embraer 190 PART 1 51-00-00 PG 4, 7050-T7 *same as 145-44131-001* | 1 | |
| GSE 333 | REFERENCE STANDARD, P/N 145-44131-001,ALUMINUM 7050-T7451 | 1 | |
| GSE 449 | Calibration Standard, Embraer 190 PART 1 51-00-00 PG 5, 15-5PH *same as 145-44131-003* | 1 | |
| GSE 450 | Calibration Standard, Embraer 190 PART 1 51-00-00 PG 6, 6AL-4V *same as 145-44131-005* | 1 | |
| GSE 497 | NDT REF STANDARD | 1 | |
| GSE 503 | CALIBRATION STANDARD | 1 | |
| GSE 503/171T17969-401 | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-10-00 pages 4-11. Includes Test Report and Certificate of Conformance. | 1 | |
| GSE 506 | EMBRAER 170/175/190/195 CALIBRATION STANDARD. PART NUMBER 171T17973-401. Includes Test Report and Certificate of Conformance. | 1 | |
| GSE 518 | NDT REFERENCE STANDARD | 1 | |
| GSE 531 | REFERENCE STANDARD, NDI | 1 | |
| GSE 539 | GSE 539 STANDARDS SET - REFERENCE, NDI - GENERAL EDDY CURRENT TES | 1 | |
| GSE523 | REFERENCE STANDARD | 1 | |
| GSE537 | REFERENCE STANDARD | 1 | |
| GT110 | TRACTOR - TOW - 72,000 DRAWBAR PULL - 90,000 GVW STANDARD (THE "STANDARD" IS NOT RECOMMENDED) - THE OPTIONAL 78,000 DRAWBAR PULL IS RECOMMENDED - 78,000 DRAW BAR PULL IS AVAILABLE AT 100K, 110K AND 120K GVW. 81.5" CAB HEIGHT | 1 | |
| GT111105 | AIRCRAFT WHEEL CHOCK STANDARD A320/B737 | 1 | |
| GTP-322 | FLUORESCING STANDARD CALIBRATION PAD GPT-32 | 1 | |
| GTS2 | CALIBRATION TEST STANDARD 2 | 1 | |
| GXO810NP | STANDARD HANDLE 60 DEGREE OFFSET HEAD. SIZE: 1/4" X 5/16" | 1 | |
| H-5265 | STANDARD BORE AIR CHUCK | 12 | |
| H-5265-OP | LOCK ON AIR CHUCK, STANDARD BORE VALVE | 2 | |
| H-5265A | STANDARD VALVE | 1 | |
| H-64B | REPLACEMENT STANDARD BLADES 100 PCKG | 1 | |
| H10-60 | STANDARD NOISE ATTENUATING HEADSET | 11 | |
| H3310 | STANDARD HEADSET | 10 | |
| HARDNESS-STANDARD-62.3HRCS | HARDNESS STANDARD | 1 | |
| HC2-S3 | STANDARD CLIMATE PROBE | 1 | |
| HCS9000B | Single Zone Hot Bonder with standard Accessory Package | 4 | |
| HDS 3.5/30-4 | KARCHER STEAM CLEANER - HDS 3.5/30-4 EA STANDARD HOT WATER PRESSURE WASHER, DIESEL/ELECTRIC, 3000 PSI, 3.5 GPM | 1 | |
| HER-097 | TOOLBOX AVIATION STANDARD | 1 | |
| HFSET | 5 Pc 8-1/2" Standard Bushing Hole Finder Kit | 1 | |
| HFSTIN-20PC | 20 Piece Hole Finder (Strap Duplicator) Kit! Includes all five sizes in 8-1/2" & 13-1/2" in Standard and Inverted Styles! | 1 | |
| HH-60W | STANDARD EXPEDITIONARY TOOL KIT | 1 | |
| HJ1-G5330-601-002 | HONDAJET REFERENCE STANDARD | 1 | |
| HLA4424-NM | Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting | 1 | |
| HLA4424-NM-PS | Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting with Safety | 1 | |
| HLA4816-1 | STANDARD SCREW-IN INFLATION NIPPLE - TUBE FOR BP HOSE | 1 | |
| HLA5625-30 | Inflation Handle Staubli RBE06 Inlet - Standard Inflation Fitting HLA6226-PD Outlet | 1 | |
| HLA5625-30-PS | Inflation Handle Staubli RBE06 Inlet - Standard Inflation Fitting with Safety HLA6226-PS Outlet | 1 | |
| HLA5854-P-D | Inflation Handle with Two Flexible Extensions (One with Standard Fitting and One with High Flow Fitting) in Transport Cases | 1 | |
| HLA5854-PS-GS | Inflation Handle with Two Flexible Extensions (One with Standard Fitting with Safety and One with High Flow Fitting with Safety) in Transport Cases | 1 | |
| HLA5959 | Hose Assembly for Air Supply to Jacks for Standard Valve | 1 | |
| HLA6226-PD | Standard Inflation Fitting barbed for Flexible Hose LP | 1 | |
| HLA6226-PS | Standard Inflation Fitting with Safety 1/4"NPT Threaded | 1 | |
| HLA6427A-PD | Precision Pressure Controller for Standard Valve (with Case) | 1 | |
| HLA6505 | Digital Inflation Handle Staubli RBE06 Inlet - Standard Inflation Fitting HLA6226-PD Outlet | 1 | |
| HLA6505-PS | Digital Inflation Handle Staubli RBE06 Inlet - Standard Inflation Fitting with Safety HLA6226-PS Outlet | 1 | |
| HLA6599 | Digital Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting | 1 | |
| HLA6599-PS | Digital Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting with Safety | 1 | |
| HP3458A | STANDARD MULTIMETER | 1 | |
| HPL-RALL-PD | RIGID PRESSURE TAP FOR STANDARD VALVE | 1 | |
| HRS-10A-0/0824 | NDT STANDARD TEMPLATE | 1 | |
| HRS-15A | ALUMINUM REFERENCE STANDARD | 1 | |
| HS0603K2D1B01B0 | HYDRO Standard A330/A340-200/ -300 Tail Stanchion | 2 | |
| HS7610 | HAMILTON STANDARD HS 7610 WRENCH SPANNER | 2 | |
| HS9458 | HAMILTON STANDARD HS 9458 WRENCH SPANNER | 3 | |
| HSEADP | Hose on side B: crimped with standard ad | 1 | |
| HSP-1825 | Standard Gauge Mod 15 | 1 | |
| HSP-1827 | Standard Gauge Mod 15 | 3 | |
| HTC-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 4 | |
| HTE-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 2 | |
| HTLP-2 | Ullman® All-Angle Magnetic Retrievers (Type: Rotating Head*) (Extension: 6-3/4" to 27-3/4") (Add to cart: Add To Cart) (Type: Standard) (Extension: 8" to 32-3/4") (Add to cart: Add To Cart) | 1 | |
| Honeywell ET Standard | Honeywell Eddy Current Wheel Surface Standard. Material:2024-T6 Forged Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| I-OST-16X16-LP8-HMHNS | I-OST-16X16-LP8-HMHNS;S600i 16x16 50um MM LC/PC ETHernet MULTIPCL HT SWP NRML Standard | 1 | |
| I-OST-24X24-LU1-HMHNS | I-OST-24X24-LU1-HMHNS;S6000I OST-24X24 LC/PC SM ETH MULTIPCL HT SWP NRML Standard | 1 | |
| I-OST-32XCC-LU1-HMHNS | I-OST-32XCC-LU1-HMHNS;S6000i Polatis OST 32xCC LC/PC SM ETH MULTIPCL HT SWP NRML Standard | 1 | |
| IAE2R18901 | REFERENCE STANDARD | 7 | |
| IAE2R18902 | REFERENCE STANDARD | 4 | |
| IAE2R19426 | WORKING STANDARD | 2 | |
| IAE2R19819 | CALIBRATION WORKING STANDARD | 1 | |
| IAE2R19854 | WORKING STANDARD (PART OF IAE2R19878) | 1 | |
| IAE2R19860 | WORKING STANDARD | 1 | |
| IDCT4101 | RETENTION GROOVE CUTTING TOOL STANDARD, 1/2 AND FI | 1 | |
| II W V1 (STEEL) | RUDDER BOLT REFERENCE STANDARD | 1 | |
| IIW TYPE 2 | CALIBRATION REFERENCE STANDARD BLOCK, ALUMINUM. (GE OR EQUIVALENT) | 1 | |
| IM1800-33A | STANDARD ANVIL ASSEMBLY | 1 | |
| INCONEL718 | NDT, STANDARDS, CALIBRATION | 1 | |
| INTEXA01 | Bowers INTEXA01 Intex Beam Gauge Standard Contacts 10mm Diameter (Pair) | 1 | |
| IPCT4101-12 | RETENTION GROOVE CUTTING TOOL STANDARD, 1/2 AND FIRST OVERSIZE | 2 | |
| IPIK4103-6 | STANDARD PORTABLE SWAGER CUTTER AND IPR AND LOAD CELL SMT PRO KITS | 1 | |
| IPIK4103-7 | STANDARD PORTABLE SWAGER CUTTER AND IPR AND LOAD CELL SMT PRO KIT | 1 | |
| ITCBB20 | STANDARD CAP - COMMON | 1 | |
| ITEM21-0-130L0WERPART | A400M NDT TEST STANDARD | 1 | |
| ITS-375 | Immersion Transducer, Standard Case, 5MHz, .375" ES, UHF Connector | 1 | |
| IWWTYPE1 | Reference Standard | 1 | |
| J27030-9 | Standard rig pin assy | 1 | |
| J34004 -8 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J34004-1 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J34004-3 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J34004-4 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J34004-5 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J34004-6 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J34004-7 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J34004-8 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J34004-9 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J442742-7RD | PROTO® ROLLER CABINET, STANDARD DUTY, LOCKABLE | 1 | |
| J4708T | PROTO 1/4'' 12-POINT SAE STANDARD SOCKET | 2 | |
| J4902A | SOCKET SET, HEX BIT, 3/8" DRIVE STANDARD: 1/4", 1/8", 3/16", 3/8", 5/16" 5/32", 7/32", METRIC: 4, 5, 6, 7, 8, 10MM, SOCKET BARS 6-1/4", 9", SOCKET CLIP 3/8" DR, 13 PIECE, MAKE: PROTO | 1 | |
| J71063-1 | STANDARD TOOL - COWL LATCHING ASSEMBLY, ENGINE COW | 3 | |
| JAT14977A | JIFFY® Standard 90° Head Attachment - Production Grade - MADE IN THE USA! | 1 | |
| JCW60BL | STANDARD CREEPER | 1 | |
| JCW62BL | F/O STANDARD CREEPER BLK | 1 | |
| JCW62G | F/O STANDARD CREEPER GRN | 1 | |
| JCW62O | F/O STANDARD CREEPER ORG | 1 | |
| JCW62PCM | F/O STANDARD CREEPER BLUE | 1 | |
| JCW62R | F/O STANDARD CREEPER RED | 1 | |
| JCW65ABL | CREEPER, STANDARD, A | 2 | |
| JCW67BL | CREEPER, STANDARD, A | 1 | |
| JCW67R | STANDARD CREEPERS | 1 | |
| JCW80R | CREEPER, STANDARD SE | 3 | |
| JGL146 | FLUID SAMPLE STANDARD TEST | 1 | |
| JHW11212 | WRENCH, COMBINATION, STANDARD LENGTH, 3/8",12 POINT (P.NO. 11212) | 1 | |
| JHW11220 | WRENCH, COMBINATION, STANDARD LENGTH, 5/8",12 POINT (P.NO. 11220) | 1 | |
| JHW11222 | WRENCH, COMBINATION, STANDARD LENGTH, 11/16",12 POINT (P.NO. 11222) | 1 | |
| JHW24915 | 1/4IN DR STANDARD HX 5/16 BIT | 1 | |
| JHW24917 | 1/4IN DR STANDARD PH2 BIT | 1 | |
| JHW24921 | 1/4IN DR STANDARD T10 BIT | 1 | |
| JHW42302 | STANDARD SEAT CREEPER | 1 | |
| JHWWRST4 | T HDLE RAT. SCDR. STANDARD | 1 | |
| JLA321C | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 3 | |
| JMP/CF6/D/4038 | 50 (2 X 25) GALLON ENGINE COMPRESSOR WASH RIG STANDARD VOLTAGE 115V/200V 400HZ FOR USE WITH AIRCRAFT | 1 | |
| JMP/GE90/D/4038/C200 | 2 X 25 GALLON COMPRESSOR WASH CART (STANDARD VOLTAGE 115V/200V 400HZ FOR USE WITH AIRCRAFT GPU ) | 1 | |
| JMP/LUFT/D/4972/C500 | 2 X 50 GALLON COMPRESSOR WASH RIG STANDARD VOLTAGE 115V/200V 400HZ FOR USE WITH AIRCRAFT GPU | 2 | |
| JMP/LUFT/D/4972/C800 | 2 X 50 GALLON COMPRESSOR WASH RIG STANDARD VOLTAGE 115V/200V 400HZ FOR USE WITH AIRCRAFT GPU | 1 | |
| K 780 | K 780;Mains Cable Straight Line UK Standard Plug | 1 | |
| K-1/16 | #50 (1/16") Standard Spring Cleco | 1 | |
| K-1/4 | 1/4" Standard Spring Cleco | 3 | |
| K-1/8 | 1/8" (#30) Standard Spring Cleco - MADE IN USA! | 6 | |
| K-144 | #27 (.144) Standard Spring Cleco | 1 | |
| K-177 | #16 (.177) Standard Spring Cleco | 1 | |
| K-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 7 | |
| K-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K-2M | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K-2MHD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K-2ML | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K-2MR | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K-2R | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K-3/16 | 3/16" (#10) Standard Spring Cleco - MADE IN USA! | 3 | |
| K-3/32 | 3/32" (#40) Standard Spring Cleco - MADE IN USA! | 2 | |
| K-5/32 | 5/32" (#20 / #21) Standard Spring Cleco - MADE IN USA! | 3 | |
| K-7/32 | 7/32" Standard Spring Cleco | 1 | |
| K-7/64 | 7/64" Standard Spring Cleco | 1 | |
| K1 | CALIBRATION STANDARD | 4 | |
| K1-4 | 1/4" STANDARD SPRING CLECO | 3 | |
| K1-8 | 1/8" (#30) STANDARD SPRING CLECO - MADE IN USA! | 6 | |
| K12003-1 | FILL TOOL – HYDRAULIC STRUT, SEMI LEVER GEAR STANDARD PRACTICES – AIRFRAME | 4 | |
| K15/15B | FACOM 12 POINT STANDARD SOCKET | 1 | |
| K2 | CALIBRATION STANDARD | 7 | |
| K5/32" | 5/32" (#20 / #21) STANDARD SPRING CLECO - MADE IN USA! | 3 | |
| KC10-7025-3 ASSEMBLY | CUSTOM MANUFACTURED BOEING REFERENCE STANDARD FOR ULTRASONIC INSPECTION 101/201 | 1 | |
| KC10-7027 | BOEING REFERENCE STANDARD KC10 FUEL COMPENSATOR CUTOUT-INSPECTION.( 301 GUIDE AND 302 GUIDE ARE PART OF INSPECTION AND SOLD SEPARATELY) | 1 | |
| KC10-POD-501-01 | KC10 Reference Standard | 1 | |
| KC10-POD-501-02 | KC10 Reference Standard | 1 | |
| KC10-POD-501-03 | KC10 Reference Standard | 1 | |
| KC10-POD-501-04 | KC10 Reference Standard | 1 | |
| KC10-POD-501-05 | KC10 Reference Standard | 1 | |
| KC10-POD-501-06 | KC10 Reference Standard | 1 | |
| KC10-POD-501-07 | KC10 Reference Standard | 1 | |
| KC10-POD-501-08 | KC10 Reference Standard | 1 | |
| KC10-POD-501-09 | KC10 Reference Standard | 1 | |
| KC10-POD-501-10 | KC10 Reference Standard | 1 | |
| KC10-POD-501-11 | KC10 Reference Standard | 1 | |
| KC10-POD-501-12 | KC10 Reference Standard | 1 | |
| KC10-POD-501-13 | KC10 Reference Standard | 1 | |
| KC10-POD-501-14 | KC10 Reference Standard | 1 | |
| KC10-POD-501-15 | KC10 Reference Standard | 1 | |
| KC10RS-7007 | KC10 Reference Standard, NDI Inspection | 1 | |
| KC10RS-7008 | KC10 Reference Standard, NDI Inspection | 1 | |
| KC10RS-7009 | KC10 Reference Standard, NDI Inspection | 1 | |
| KC10RS-7010 | KC10 Reference Standard, NDI Inspection | 1 | |
| KC10RS-7011 | KC10 Reference Standard, NDI Inspection | 1 | |
| KC10RS-7012 | KC10 Reference Standard, NDI Inspection | 1 | |
| KC10RS-7013 | KC10 Reference Standard, KC10RS-7013 | 1 | |
| KC10RS-7014 | KC10 Reference Standard, KC10RS-7014 | 1 | |
| KC10RS-7015 | KC10 Reference Standard, KC10RS-7015 | 1 | |
| KC10RS-7016 | KC10 Reference Standard, KC10RS-7016 | 1 | |
| KC10RS-7017 | KC10 Reference Standard, KC10RS-7017 | 1 | |
| KC10RS-7018 | KC10 Reference Standard, KC10RS-7018 | 1 | |
| KC10RS-7019 | KC10 Reference Standard, KC10RS-7019 | 1 | |
| KC10RS-7020 | KC10 Reference Standard, KC10RS-7020 | 1 | |
| KC10RS-7021 | KC10 Reference Standard, KC10RS-7021 | 1 | |
| KC10RS-7022 | KC10 Reference Standard, KC10RS-7022 | 1 | |
| KC10RS-7023 | KC10 Reference Standard, KC10RS-7023 | 1 | |
| KC10RS-7024 | KC10 Reference Standard, KC10RS-7024 | 1 | |
| KC10RS.15C | KC10 Reference Standard, KC10 W7 PG1 SHEET1 | 1 | |
| KC10RS.15a | KC10 Reference Standard, KC10 W23 PG1 SHEET1 | 1 | |
| KC10RS.15b | KC10 Reference Standard, KC10 W23/W7 PG1 SHEET1 | 1 | |
| KC10RS.51-1 | KC10 Reference Standard, KC10 W31 PG1 SHEET1 | 1 | |
| KLED2026 | STANDARD DIA CUTTER W/TAP.NOSE | 1 | |
| KR-C-WC | WATER RAM STANDARD WITH TOILET ATTACHMENT | 1 | |
| KT56778 | MESSIER-DOWTY REFERENCE STANDARD 631-32-181 2024-T3 | 1 | |
| KY | STANDARD SUPLERGRIP COUPLER | 1 | |
| L00-M4 | STANDARD CABLE | 1 | |
| L1-M4 | STANDARD CABLE | 1 | |
| L1011-NDI-0100-57-030 | Calibration Standard, L1011 PT4 57-32-80:PG3 FIG2 | 1 | |
| L17-200 | WING COVERS, standard wingtip, WINTER USE (set of 2) | 1 | |
| L17-205 | WING COVERS, standard wingtip, ALL YEAR USE (set of 2) | 1 | |
| L1CM-74-1.2 | STANDARD CABLE | 1 | |
| L2200 | Grease Hoses (Type: Standard) (Overall length: 12" (30.4 cm)) (Add to cart: Add To Cart) | 1 | |
| L2205 | Grease Hoses (Type: Standard) (Overall length: 12" (30.4 cm)) (Add to cart: Add To Cart) (Type: Standard) (Overall length: 12" (30.4 cm)) (Add to cart: Add To Cart) | 1 | |
| L2210 | Grease Hoses (Type: Standard) (Overall length: 12" (30.4 cm)) (Add to cart: Add To Cart) (Type: Standard) (Overall length: 12" (30.4 cm)) (Add to cart: Add To Cart) (Type: Standard) (Overall length: 18" (45.7 cm)) (Add to cart: Add To Cart) | 1 | |
| L2220 | Grease Hoses (Type: Standard) (Overall length: 12" (30.4 cm)) (Add to cart: Add To Cart) (Type: Standard) (Overall length: 12" (30.4 cm)) (Add to cart: Add To Cart) (Type: Standard) (Overall length: 18" (45.7 cm)) (Add to cart: Add To Cart) (Type: Standar | 1 | |
| L2250 | High-Pressure Grease 'Whip' Hoses (Type: Standard) (Overall length: 12" (30.4 cm)) (Add to cart: Item is no longer available.) | 1 | |
| L2260 | High-Pressure Grease 'Whip' Hoses (Type: Standard) (Overall length: 12" (30.4 cm)) (Add to cart: Item is no longer available.) (Type: Standard) (Overall length: 18" (45.7 cm)) (Add to cart: Add To Cart) | 1 | |
| L2305 | Legacy L2305 LubeLink Standard Buttonhead Coupler, 4000 PSI, QuickConnect | 1 | |
| L90-210 | WING COVERS (STANDARD MODELS), WINTER USE (set of 2) | 1 | |
| L90-215 | WING COVERS (STANDARD MODELS), ALL YEAR USE (set of 2) | 1 | |
| LA-705T | TOP MOUNTED REFERENCE STANDARD 5 MHZ IN ALUMINIUM | 2 | |
| LA-705T 70A | TOP MOUNTED REFERENCE STANDARD 5 MHZ IN ALUMINIUM | 1 | |
| LAPTOP | STANDARD MAINTENANCE LAPTOP | 1 | |
| LASER12 | STANDARD ETCH UP TO 12 CHAR | 1 | |
| LCB-74-4 | CABLE. STANDARD &LEMO TO BNC. 4. RG-174 | 2 | |
| LCLPD-78-5 | THICKNESS METER CABLE FOR OLYMPUS 38DL PLUS CABLE PART # LCLPD-78-5 – FOR USE WITH MTD705 TRANSDUCER, STANDARD TYPE, DUAL LEMO MOLDED PLUG TO LEPRA/CON. 5 FT. RG178 MAKE: EVIDENT (OLYMPUS) – USA | 1 | |
| LCM-74-1.2 | STANDARD CABLE | 1 | |
| LCM-74-3 | THICKNESS METER CABLE FOR OLYMPUS 38DL PLUS CABLE: CABLE PART # LCM-74-3 – FOR USE WITH M1016 TRANSDUCER, STANDARD TYPE, STANDARD LEMO TO MICRODOT. 3 FT. RG-174 MAKE: EVIDENT (OLYMPUS) – USA | 2 | |
| LCM-74-4 | CABLE, STANDARD LEMO TO MICRODOT. 4 FT. RG-175 | 1 | |
| LCM-74-6 | CABLE STANDARD LEMO TO MICRODOT | 1 | |
| LDH762 | SOCKET, STANDARD | 4 | |
| LG-50KG | GAUGESTANDARD ACCESS | 8 | |
| LJ6130 | STANDARD RESISTOR | 1 | |
| LN-RB-53SPN-BC1 | LN-RB-53SPN-BC1;LN Rb SA.53 Standard PN Bronze Care - 1Yr - Up to 3Yr Duration | 1 | |
| LN-RB-55SPN-BC1 | LN-RB-55SPN-BC1;LN Rb SA.55 Standard PN Bronze Care - 1Yr - Up to 3Yr Duration | 1 | |
| LP404 | SET,LOCKING PLIERS, STANDARD GRIP, 4 PCS. | 3 | |
| LS-20 | HALIDE LEAK STANDARD | 1 | |
| LS-20B | HALIDE LEAK STANDARD | 1 | |
| LS20 | HALIDE LEAK STANDARD | 1 | |
| LS20B | STANDARD, HALIDE LEAK | 1 | |
| LST20R550 | ORBITAL SANDER STANDARD | 1 | |
| LST50678 | ENGLISHSTANDARDWIREGAGENOS1-36 | 1 | |
| LST51001 | 17IN BAR STANDARD | 1 | |
| LST51005 | 19IN BAR STANDARD | 1 | |
| LST51011 | 22IN BAR STANDARD | 1 | |
| LST51015 | 24IN MICROMETER/BAR STANDARD | 1 | |
| LST51316 | AMERICANSTANDARDWIREGAGE#0-36 | 1 | |
| LST51318 | U.S. STANDARD GAGE | 1 | |
| LST51319 | ACME STANDARD SCREW GAGE | 1 | |
| LST67789 | 39IN MIC STANDARD | 1 | |
| LSTSLC | STANDARD LETTER OF CERTIFICATI | 1 | |
| LTCT5511 | Wheel Standard Speed Pickup Test | 1 | |
| LTCT5511-01 | Standard Speed Pickup Test Wheel | 1 | |
| LUG-STD-TEST 1 | BOEING STANDARD | 1 | |
| LUG-STD-TEST 3 | BOEING STANDARD | 1 | |
| LUG-STD-TEST2 | BOEING STANDARD | 1 | |
| LWJWG | CALIBRATION STANDARD | 1 | |
| Level1 | STANDARD LEVEL 1 STAND MAINTENANCE | 1 | |
| Lucite Wedge 120P | Custom Lucite Wedge for Reference Standard 1. Material: Lucite/Cast Acrylic | 1 | |
| M1 PROB | M1 PROBE STANDARD REMOTE PROBE CABLE | 3 | |
| M1-G-KIT | STANDARD M1-G METER HAS GREEN DISPLAY WITH RESOLUTION OF 0.01 MILLIOHMS | 6 | |
| M1-PROB | STANDARD REMOTE PROB | 3 | |
| M1-Prob | M1 PROBE STANDARD REMOTE PROBE CABLE | 3 | |
| M1-TIPS-STD | STANDARDREPLACEMENTTIPS | 1 | |
| M103-SB | CONTACT TRANSDUCER, 1 MHZ, 0.50" ELEMENT DIAMETER, STANDARD CASE STYLE, STRAIGHT BNC CONNECTOR | 1 | |
| M1130A | COAXIAL RF TERMINATING POWER STANDARD | 1 | |
| M20-115 | INSULATED ENGINE COVER, Fully Enclosed, standard windshield | 1 | |
| M346 SPAR 4 STD-1 | CUSTOM REFERENCE STANDARD, H346 SPAR 4 STD-1 HOLE INTERFACE WITH FLAPS HINGE REWORK. MATERIAL: 7050-T7451 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| M46292 | "ADAPTOR OR SOCKET STANDARD WITH AN EXTENSION (320, 321) | 28 | |
| M7-STD | M7 Aerospace SA227 Cal Standard | 1 | |
| M83485-1-152 | AGB MANUAL DRIVE COVER SEAL (INTERNATIONAL STANDARD) | 2 | |
| M90 | ULTRASONIC KIT ( TYPE M90) REFLECTROSCOPE WITH STANDARD PULSER/RECEIVER | 1 | |
| MA-705S 70A | SIDE MOUNTED REFERENCE STANDARD 5 MHZ IN ALUMINIUM | 1 | |
| MA40-13 | TRACTOR - CARGO - 4000 DRAW BAR PULL - DIESEL POWERED - STANDARD HEIGHT (FOR LOW PROFILE USE M1A SERIES) | 1 | |
| MA40-24 | TRACTOR - CARGO - 4000 DRAW BAR PULL - DIESEL POWERED - STANDARD HEIGHT (FOR LOW PROFILE USE M1A SERIES) | 1 | |
| MAB BLOCK-A | REFERENCE STANDARD ALUMINIUM 7075 T6-CONF ASTM E164 | 1 | |
| MAB Block-A | REFERENCE STANDARD | 1 | |
| MAP-RM-C13456FP-M100-MFA | MAP-RM-C13456FP-M100-MFA;MAP-220 OCWR IL/RL Meter 1310/1490/1550/1625nm Standard FP laser SMF FC/APC | 1 | |
| MAP-RM-C13500FP-M100-MFA | MAP-RM-C13500FP-M100-MFA;MAP-220 OCWR IL/RL Meter 1310/1550nm Standard FP laser SMF FC/APC | 1 | |
| MAT/ULT/183 | CALIBRATION TEST STANDARDS (CTS) | 2 | |
| MAT/ULT/1830 | CALIBRATION STANDARD | 1 | |
| MAT/ULT/TP183 | CALIBRATION TEST STANDARD | 1 | |
| MATULT183 | 3. REFERENCE STANDARD | 2 | |
| MAU-220 | WING COVERS (standard tip), WINTER USE (set of 2) | 1 | |
| MAU-225 | WING COVERS (standard tip), ALL YEAR USE (set of 2) | 1 | |
| MAU-901 | WINDSHIELD/SKYLIGHT HEATSHIELDS (Standard Skylight) (set of 2) | 1 | |
| MB12P-1 | STANDARD CIRCULAR CONNECTOR | 1 | |
| MBBCFRPSTD100 | REFERENCE STANDARD | 1 | |
| MBBCFRPSTD3000 | REFERENCE STANDARD | 1 | |
| MBBGCFRPHC200 | CALIBRATION STANDARD | 1 | |
| MBBRIIL80 | CALIBRATION STANDARD FOR RUDDER INSPECTION | 1 | |
| MD11-04-210 | Douglas Standard, MD11 ALI SECTION2-1:PG1 FIG1.29:SHEET1 | 1 | |
| MD11-04-325 | Douglas Standard, MD11 ALI SECTION2-1:PG1 FIG1.30:SHEET1 | 1 | |
| MD11-04-400 | Douglas Standard, MD11 ALI SECTION2-1:PG1 FIG1.31:SHEET1 | 1 | |
| MD11-05a | SUBSURFACE AL ETLF STANDARD DM-11 SECTION 2-1 PG1 SHEET 1 | 1 | |
| MD11-05b | MD11 SUBSURFACE ALUMINUM ETLF REFERENCE STANDARD FIG 1.10 (Sheets 1-5) Section 2-1 Pages 1-5. Includes Test Report and Certificate of Conformance. | 1 | |
| MD11-05c | MD11 SUBSURFACE ALUMINUM ETLF REFERENCE STANDARD FIG 1.11 (Sheets 1-5) Section 2-1 Pages 1-5. Includes Test Report and Certificate of Conformance. | 1 | |
| MD11-08 | Douglas Standard, MD11 ALI SECTION2-1:PG1 FIG1.15 | 1 | |
| MD11-09 | Douglas Standard, MD11 ALI SECTION2-1:PG1 FIG1.22 | 1 | |
| MD11-10 | Douglas Standard, MD11 ALI SECTION2-1:PG1 FIG1.23 | 1 | |
| MD11-11 | Douglas Standard, MD11 ALI SECTION2-1:PG1 FIG1.27 | 1 | |
| MD11/57-10-25 | MD11 REFERENCE STANDARD 57-10-25 FIG 603 (Sheet 13) Page 618. Includes Test Report and Certificate of Conformance. | 1 | |
| MD90-01 | MD-90 REFERENCE STANDARD, SECTION 2-1 FIG 1.1 FASTENER (HL19PB-6-4 +NAS1252-10L + NAS679A3) Includes Test Report and Certificate of Conformance. | 1 | |
| MD900-600 | BLADE COVERS (standard type) (set of 5) | 1 | |
| MEN-14A-0401F | STANDARD NOSECAP ASSEMBLY | 1 | |
| MEN-14A-0423F | STANDARD NOSECAP ASSY | 1 | |
| MEN-14A-0601F | STANDARD NOSE CAL ASSEMBLY | 4 | |
| MEN-14A-0623F | STANDARD NOSECAP ASSEMBLY | 4 | |
| MEN-14A-0801F | STANDARD NOSECAP ASSEMBLY | 3 | |
| MEN-14A-0823F | STANDARD NOSECAP ASSEMBLY | 4 | |
| MEN-14A-1001F | STANDARD NOSE CAP ASSEMBLY | 3 | |
| MEN-14A-1023F | STANDARD NOSECAP ASSEMBLY | 2 | |
| MEN-14A-1223F | STANDARD NOSECAP ASSEMBLY | 2 | |
| MEN-14A-1423F | STANDARD NOSE CAP | 1 | |
| MEN-14A-1623F | STANDARD NOSECAP ASSY | 1 | |
| MEN-26C-2623F | STANDARD NOSECAP ASSEMBLY | 1 | |
| MFCL150 | 1/4 STANDARD COUPLER | 1 | |
| MFR-C | HOIST,LEVER,3/4 TON,MFR#C&M,MOD#640 5 EACH HOIST,LEVER,3/4 TON,MODEL 640,MFR-C&M NOTE: SHOULD MEET U.S.BRITISH STANDARD, OTHER THAN THIS SHOULD NOT BE ACCEPTED. "TUGIT" U.S.A. BEEN ACCEPTED | 1 | |
| MG0010G00131 | BOX ELECTROAVIONIC, STANDARD TOOLS | 1 | |
| MHS-10-1A-2 | CURRENT BOLT HOLE STANDARD | 2 | |
| MHS-10-1SS-0 | STAINLESS STEEL BOLTHOLE REFERANCE STANDARD | 1 | |
| MHS-12-1A-0 | "EC REFERENCE STANDARD U8860405 | 1 | |
| MHS-12-1A-2 | ALUMINUM (7075-T6) MULTI-HOLE REFERENCE STANDARD WITH CERTIFICATE TRACEABLE TO NIST | 1 | |
| MHS-15-1A-3 | REFERENCE STANDARD | 1 | |
| MHS-29-1A-0 | HOLE STANDARD | 1 | |
| MHS29-1S0 | HOLE STANDARD | 1 | |
| MI-12-1.1 | STANDARD GAIN HORN | 1 | |
| MI121.1 | STANDARD GAIN HORN | 1 | |
| MIG1605 | STANDARD TORCH | 1 | |
| MIL-C-27500-AWG22 | STANDARD WIRE SHEILDED TWISTED PAIR PRICE PER FT | 1 | |
| MK7ATIS-002 | INFLATION KIT, TYRE, W/STANDARD REACH HOSE | 6 | |
| ML-01 | Cable, Standard 6-Foot long, Microdot / Lemo RG174 | 1 | |
| MOCETS-A4055S0-M100-MFA | MOCETS-A4055S0-M100-MFA;MAP-300 OCETS System 55 channel standard SM FC/APC | 1 | |
| MOCETS-A4055S0-M100-MNC | MOCETS-A4055S0-M100-MNC;MAP-300 OCETS System 55 channel standard SM no connector | 1 | |
| MOCETS-A4055S0-M101-MFA | MOCETS-A4055S0-M101-MFA;MAP-300 OCETS System 55 channel standard 50um MM FC/APC | 1 | |
| MOCETS-A4055S0-M101-MNC | MOCETS-A4055S0-M101-MNC;MAP-300 OCETS System 55 channel standard 50um MM no connector | 1 | |
| MOCETS-A4105S0-M100-MFA | MOCETS-A4105S0-M100-MFA;MAP-300 OCETS System 105 channel standard SM FC/APC | 1 | |
| MOCETS-A4105S0-M100-MNC | MOCETS-A4105S0-M100-MNC;MAP-300 OCETS System 105 channel standard SM no connector | 1 | |
| MOCETS-A4105S0-M101-MFA | MOCETS-A4105S0-M101-MFA;MAP-300 OCETS System 105 channel standard 50um MM FC/APC | 1 | |
| MOCETS-A4105S0-M101-MNC | MOCETS-A4105S0-M101-MNC;MAP-300 OCETS System 105 channel standard 50um MM no connector | 1 | |
| MOCETS-A4160S0-M100-MFA | MOCETS-A4160S0-M100-MFA;MAP-300 OCETS System 160 channel standard SM FC/APC | 1 | |
| MOCETS-A4160S0-M100-MNC | MOCETS-A4160S0-M100-MNC;MAP-300 OCETS System 160 channel standard SM no connector | 1 | |
| MOCETS-A4160S0-M101-MFA | MOCETS-A4160S0-M101-MFA;MAP-300 OCETS System 160 channel standard 50um MM FC/APC | 1 | |
| MOCETS-A4160S0-M101-MNC | MOCETS-A4160S0-M101-MNC;MAP-300 OCETS System 160 channel standard 50um MM no connector | 1 | |
| MOCETS-A4210S0-M100-MFA | MOCETS-A4210S0-M100-MFA;MAP-300 OCETS System 210 channel standard SM FC/APC | 1 | |
| MOCETS-A4210S0-M100-MNC | MOCETS-A4210S0-M100-MNC;MAP-300 OCETS System 210 channel standard SM no connector | 1 | |
| MOCETS-A4210S0-M101-MFA | MOCETS-A4210S0-M101-MFA;MAP-300 OCETS System 210 channel standard 50um MM FC/APC | 1 | |
| MOCETS-A4210S0-M101-MNC | MOCETS-A4210S0-M101-MNC;MAP-300 OCETS System 210 channel standard 50um MM no connector | 1 | |
| MOCETS-A4320S0-M100-MFA | MOCETS-A4320S0-M100-MFA;MAP-300 OCETS System 320 channel standard SM FC/APC | 1 | |
| MOCETS-A4320S0-M100-MNC | MOCETS-A4320S0-M100-MNC;MAP-300 OCETS System 320 channel standard SM no connector | 1 | |
| MOCETS-A4320S0-M101-MFA | MOCETS-A4320S0-M101-MFA;MAP-300 OCETS System 320 channel standard 50um MM FC/APC | 1 | |
| MOCETS-A4320S0-M101-MNC | MOCETS-A4320S0-M101-MNC;MAP-300 OCETS System 320 channel standard 50um MM no connector | 1 | |
| MOD-091 | REFERENCE STANDARD | 1 | |
| MPS43B-A0-B9-F3-K0 | Standard MPS43B Price Offering, Incl Wi-Fi | 1 | |
| MRC005574 | INDICATOR/REGISTER - MOISTURE, RADOME (MODEL A8AF) (115 V) (CONSISTS OF ELECTRODE GUN, METER, BATTERY, CHARGER/CALIBRATION STANDARD AND 3 FOOT CABLE) | 4 | |
| MRC006507 | INDICATOR/REGISTER - MOISTURE, RADOME (MODEL A8AF) (230 V) (CONSISTS OF ELECTRODE GUN, METER, BATTERY, CHARGER/CALIBRATION STANDARD AND 3 FOOT CABLE) | 5 | |
| MS20426D5-6 | CALIBRATION STANDARD RIVET | 1 | |
| MS21902D10 | ADAPTER, HOSE TO ENCLOSURE(AS21902D10, SAE: SOCIETY OF AUTOMOTIVE ENGINEERS, AEROSPACE STANDARD) | 1 | |
| MS21902J4 | STANDARD FITTING FOR COMBUSTOR DRAIN | 8 | |
| MS22058-1 | Military Standard MS22058-1 Adapter, Compressed Gas Cylinder Valve Connections | 2 | |
| MS25182-2 | STANDARD BATTERY DISCONNECT PLUG ASSY | 1 | |
| MS27215-1 | Military Standard MS27215-1 18mm (Non-Refillable) Dehydrator Spark Plug | 3 | |
| MS27215-2 | Military Standard MS27215-2 18mm (Refillable) Dehydrator Spark Plug | 5 | |
| MS28889-2 | MILITARY STANDARD MS28889-2 VALVE, PNEUMATIC TANK | 14 | |
| MS3160-20 | Military Standard MS3160-20 Inserter & Remover, Electrical Connector | 1 | |
| MS3396-12 | Military Standard MS3396-12 14mm Dehydrator Spark Plug | 2 | |
| MS35670-2A | Military Standard MS35670-2A Steel Valve, Safety Relief | 2 | |
| MS9315-04 | STANDARD CAP FITTING | 1 | |
| MSL98370 | STANDARD COUPLER/ADAPTOR KIT | 1 | |
| MSRC-C21308FP-M101-MFP | MSRC-C21308FP-M101-MFP;850/1310nm Standard FP laser 50um MMF EF compliant FC/PC | 1 | |
| MSRC-C21308FPX-M101-MFP | MSRC-C21308FPX-M101-MFP;850/1310nm Standard FP laser Single output 50um MMF EF compliant FC/PC | 1 | |
| MSRC-C23456FP-M100-MFA | MSRC-C23456FP-M100-MFA;1310/1490/1550/1625nm Standard FP laser SMF FC/APC | 1 | |
| MSRC-C23456FPX-M100-MFA | MSRC-C23456FPX-M100-MFA;1310/1490/1550/1625nm Standard FP laser SMF Single output FC/APC | 1 | |
| MSRC-C23500FP-M100-MFA | MSRC-C23500FP-M100-MFA;1310/1550nm Standard FP laser SMF FC/APC | 1 | |
| MSRC-C23500FPX-M100-MFA | MSRC-C23500FPX-M100-MFA;1310/1550nm Standard FP laser SMF Single output FC/APC | 1 | |
| MT1462 | STANDARD VALVE CORE BIT DRIVER | 1 | |
| MVOA-C1DS0-M100-MFA | MVOA-C1DS0-M100-MFA;DUAL VOA STANDARD POWER NO OPTION SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1DS0-M100-MFP | MVOA-C1DS0-M100-MFP;DUAL VOA STANDARD POWER NO OPTION SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1DS0-M100-MLC | MVOA-C1DS0-M100-MLC;DUAL VOA STANDARD POWER NO OPTION SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1DS0-M100-MLU | MVOA-C1DS0-M100-MLU;DUAL VOA STANDARD POWER NO OPTION SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1DS0-M100-MSC | MVOA-C1DS0-M100-MSC;DUAL VOA STANDARD POWER NO OPTION SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1DS0-M100-MSU | MVOA-C1DS0-M100-MSU;DUAL VOA STANDARD POWER NO OPTION SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1DS0-M101-MFA | MVOA-C1DS0-M101-MFA;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM FC/APC | 1 | |
| MVOA-C1DS0-M101-MFP | MVOA-C1DS0-M101-MFP;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM FC/PC | 1 | |
| MVOA-C1DS0-M101-MLC | MVOA-C1DS0-M101-MLC;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM LC/PC | 1 | |
| MVOA-C1DS0-M101-MLU | MVOA-C1DS0-M101-MLU;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM LC/APC | 1 | |
| MVOA-C1DS0-M101-MSC | MVOA-C1DS0-M101-MSC;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM SC/PC | 1 | |
| MVOA-C1DS0-M101-MSU | MVOA-C1DS0-M101-MSU;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM SC/APC | 1 | |
| MVOA-C1DS0-M102-MFA | MVOA-C1DS0-M102-MFA;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM FC/APC | 1 | |
| MVOA-C1DS0-M102-MFP | MVOA-C1DS0-M102-MFP;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM FC/PC | 1 | |
| MVOA-C1DS0-M102-MLC | MVOA-C1DS0-M102-MLC;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM LC/PC | 1 | |
| MVOA-C1DS0-M102-MLU | MVOA-C1DS0-M102-MLU;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM LC/APC | 1 | |
| MVOA-C1DS0-M102-MSC | MVOA-C1DS0-M102-MSC;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM SC/PC | 1 | |
| MVOA-C1DS0-M102-MSU | MVOA-C1DS0-M102-MSU;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM SC/APC | 1 | |
| MVOA-C1DS1-M100-MFA | MVOA-C1DS1-M100-MFA;DUAL VOA STANDARD POWER TAP SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1DS1-M100-MFP | MVOA-C1DS1-M100-MFP;DUAL VOA STANDARD POWER TAP SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1DS1-M100-MLC | MVOA-C1DS1-M100-MLC;DUAL VOA STANDARD POWER TAP SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1DS1-M100-MLU | MVOA-C1DS1-M100-MLU;DUAL VOA STANDARD POWER TAP SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1DS1-M100-MSC | MVOA-C1DS1-M100-MSC;DUAL VOA STANDARD POWER TAP SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1DS1-M100-MSU | MVOA-C1DS1-M100-MSU;DUAL VOA STANDARD POWER TAP SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1DSM-M100-MFA | MVOA-C1DSM-M100-MFA;DUAL VOA STANDARD POWER MONITOR SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1DSM-M100-MFP | MVOA-C1DSM-M100-MFP;DUAL VOA STANDARD POWER MONITOR SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1DSM-M100-MLC | MVOA-C1DSM-M100-MLC;DUAL VOA STANDARD POWER MONITOR SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1DSM-M100-MLU | MVOA-C1DSM-M100-MLU;DUAL VOA STANDARD POWER MONITOR SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1DSM-M100-MSC | MVOA-C1DSM-M100-MSC;DUAL VOA STANDARD POWER MONITOR SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1DSM-M100-MSU | MVOA-C1DSM-M100-MSU;DUAL VOA STANDARD POWER MONITOR SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1DSM-M101-MFA | MVOA-C1DSM-M101-MFA;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM FC/APC | 1 | |
| MVOA-C1DSM-M101-MFP | MVOA-C1DSM-M101-MFP;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM FC/PC | 1 | |
| MVOA-C1DSM-M101-MLC | MVOA-C1DSM-M101-MLC;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM LC/PC | 1 | |
| MVOA-C1DSM-M101-MLU | MVOA-C1DSM-M101-MLU;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM LC/APC | 1 | |
| MVOA-C1DSM-M101-MSC | MVOA-C1DSM-M101-MSC;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM SC/PC | 1 | |
| MVOA-C1DSM-M101-MSU | MVOA-C1DSM-M101-MSU;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM SC/APC | 1 | |
| MVOA-C1DSM-M102-MFA | MVOA-C1DSM-M102-MFA;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM FC/APC | 1 | |
| MVOA-C1DSM-M102-MFP | MVOA-C1DSM-M102-MFP;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM FC/PC | 1 | |
| MVOA-C1DSM-M102-MLC | MVOA-C1DSM-M102-MLC;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM LC/PC | 1 | |
| MVOA-C1DSM-M102-MLU | MVOA-C1DSM-M102-MLU;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM LC/APC | 1 | |
| MVOA-C1DSM-M102-MSC | MVOA-C1DSM-M102-MSC;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM SC/PC | 1 | |
| MVOA-C1DSM-M102-MSU | MVOA-C1DSM-M102-MSU;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM SC/APC | 1 | |
| MVOA-C1QS0-M100-MFA | MVOA-C1QS0-M100-MFA;QUAD VOA STANDARD POWER NO OPTION SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1QS0-M100-MFP | MVOA-C1QS0-M100-MFP;QUAD VOA STANDARD POWER NO OPTION SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1QS0-M100-MLC | MVOA-C1QS0-M100-MLC;QUAD VOA STANDARD POWER NO OPTION SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1QS0-M100-MLU | MVOA-C1QS0-M100-MLU;QUAD VOA STANDARD POWER NO OPTION SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1QS0-M100-MSC | MVOA-C1QS0-M100-MSC;QUAD VOA STANDARD POWER NO OPTION SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1QS0-M100-MSU | MVOA-C1QS0-M100-MSU;QUAD VOA STANDARD POWER NO OPTION SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1QS0-M101-MFA | MVOA-C1QS0-M101-MFA;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM FC/APC | 1 | |
| MVOA-C1QS0-M101-MFP | MVOA-C1QS0-M101-MFP;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM FC/PC | 1 | |
| MVOA-C1QS0-M101-MLC | MVOA-C1QS0-M101-MLC;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM LC/PC | 1 | |
| MVOA-C1QS0-M101-MLU | MVOA-C1QS0-M101-MLU;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM LC/APC | 1 | |
| MVOA-C1QS0-M101-MSC | MVOA-C1QS0-M101-MSC;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM SC/PC | 1 | |
| MVOA-C1QS0-M101-MSU | MVOA-C1QS0-M101-MSU;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM SC/APC | 1 | |
| MVOA-C1QS0-M102-MFA | MVOA-C1QS0-M102-MFA;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM FC/APC | 1 | |
| MVOA-C1QS0-M102-MFP | MVOA-C1QS0-M102-MFP;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM FC/PC | 1 | |
| MVOA-C1QS0-M102-MLC | MVOA-C1QS0-M102-MLC;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM LC/PC | 1 | |
| MVOA-C1QS0-M102-MLU | MVOA-C1QS0-M102-MLU;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM LC/APC | 1 | |
| MVOA-C1QS0-M102-MSC | MVOA-C1QS0-M102-MSC;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM SC/PC | 1 | |
| MVOA-C1QS0-M102-MSU | MVOA-C1QS0-M102-MSU;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM SC/APC | 1 | |
| MVOA-C1QS1-M100-MFA | MVOA-C1QS1-M100-MFA;QUAD VOA STANDARD POWER TAP SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1QS1-M100-MFP | MVOA-C1QS1-M100-MFP;QUAD VOA STANDARD POWER TAP SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1QS1-M100-MLC | MVOA-C1QS1-M100-MLC;QUAD VOA STANDARD POWER TAP SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1QS1-M100-MLU | MVOA-C1QS1-M100-MLU;QUAD VOA STANDARD POWER TAP SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1QS1-M100-MSC | MVOA-C1QS1-M100-MSC;QUAD VOA STANDARD POWER TAP SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1QS1-M100-MSU | MVOA-C1QS1-M100-MSU;QUAD VOA STANDARD POWER TAP SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1QSM-M100-MFA | MVOA-C1QSM-M100-MFA;QUAD VOA STANDARD POWER MONITOR SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1QSM-M100-MFP | MVOA-C1QSM-M100-MFP;QUAD VOA STANDARD POWER MONITOR SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1QSM-M100-MLC | MVOA-C1QSM-M100-MLC;QUAD VOA STANDARD POWER MONITOR SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1QSM-M100-MLU | MVOA-C1QSM-M100-MLU;QUAD VOA STANDARD POWER MONITOR SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1QSM-M100-MSC | MVOA-C1QSM-M100-MSC;QUAD VOA STANDARD POWER MONITOR SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1QSM-M100-MSU | MVOA-C1QSM-M100-MSU;QUAD VOA STANDARD POWER MONITOR SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1QSM-M101-MFA | MVOA-C1QSM-M101-MFA;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM FC/APC | 1 | |
| MVOA-C1QSM-M101-MFP | MVOA-C1QSM-M101-MFP;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM FC/PC | 1 | |
| MVOA-C1QSM-M101-MLC | MVOA-C1QSM-M101-MLC;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM LC/PC | 1 | |
| MVOA-C1QSM-M101-MLU | MVOA-C1QSM-M101-MLU;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM LC/APC | 1 | |
| MVOA-C1QSM-M101-MSC | MVOA-C1QSM-M101-MSC;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM SC/PC | 1 | |
| MVOA-C1QSM-M101-MSU | MVOA-C1QSM-M101-MSU;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM SC/APC | 1 | |
| MVOA-C1QSM-M102-MFA | MVOA-C1QSM-M102-MFA;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM FC/APC | 1 | |
| MVOA-C1QSM-M102-MFP | MVOA-C1QSM-M102-MFP;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM FC/PC | 1 | |
| MVOA-C1QSM-M102-MLC | MVOA-C1QSM-M102-MLC;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM LC/PC | 1 | |
| MVOA-C1QSM-M102-MLU | MVOA-C1QSM-M102-MLU;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM LC/APC | 1 | |
| MVOA-C1QSM-M102-MSC | MVOA-C1QSM-M102-MSC;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM SC/PC | 1 | |
| MVOA-C1QSM-M102-MSU | MVOA-C1QSM-M102-MSU;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM SC/APC | 1 | |
| MVOA-C1SS0-M100-MFA | MVOA-C1SS0-M100-MFA;SINGLE VOA STANDARD POWER NO OPTION SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1SS0-M100-MFP | MVOA-C1SS0-M100-MFP;SINGLE VOA STANDARD POWER NO OPTION SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1SS0-M100-MLC | MVOA-C1SS0-M100-MLC;SINGLE VOA STANDARD POWER NO OPTION SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1SS0-M100-MLU | MVOA-C1SS0-M100-MLU;SINGLE VOA STANDARD POWER NO OPTION SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1SS0-M100-MSC | MVOA-C1SS0-M100-MSC;SINGLE VOA STANDARD POWER NO OPTION SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1SS0-M100-MSU | MVOA-C1SS0-M100-MSU;SINGLE VOA STANDARD POWER NO OPTION SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1SS0-M101-MFA | MVOA-C1SS0-M101-MFA;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM FC/APC | 1 | |
| MVOA-C1SS0-M101-MFP | MVOA-C1SS0-M101-MFP;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM FC/PC | 1 | |
| MVOA-C1SS0-M101-MLC | MVOA-C1SS0-M101-MLC;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM LC/PC | 1 | |
| MVOA-C1SS0-M101-MLU | MVOA-C1SS0-M101-MLU;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM LC/APC | 1 | |
| MVOA-C1SS0-M101-MSC | MVOA-C1SS0-M101-MSC;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM SC/PC | 1 | |
| MVOA-C1SS0-M101-MSU | MVOA-C1SS0-M101-MSU;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM SC/APC | 1 | |
| MVOA-C1SS0-M102-MFA | MVOA-C1SS0-M102-MFA;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM FC/APC | 1 | |
| MVOA-C1SS0-M102-MFP | MVOA-C1SS0-M102-MFP;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM FC/PC | 1 | |
| MVOA-C1SS0-M102-MLC | MVOA-C1SS0-M102-MLC;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM LC/PC | 1 | |
| MVOA-C1SS0-M102-MLU | MVOA-C1SS0-M102-MLU;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM LC/APC | 1 | |
| MVOA-C1SS0-M102-MSC | MVOA-C1SS0-M102-MSC;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM SC/PC | 1 | |
| MVOA-C1SS0-M102-MSU | MVOA-C1SS0-M102-MSU;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM SC/APC | 1 | |
| MVOA-C1SS1-M100-MFA | MVOA-C1SS1-M100-MFA;SINGLE VOA STANDARD POWER TAP SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1SS1-M100-MFP | MVOA-C1SS1-M100-MFP;SINGLE VOA STANDARD POWER TAP SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1SS1-M100-MLC | MVOA-C1SS1-M100-MLC;SINGLE VOA STANDARD POWER TAP SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1SS1-M100-MLU | MVOA-C1SS1-M100-MLU;SINGLE VOA STANDARD POWER TAP SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1SS1-M100-MSC | MVOA-C1SS1-M100-MSC;SINGLE VOA STANDARD POWER TAP SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1SS1-M100-MSU | MVOA-C1SS1-M100-MSU;SINGLE VOA STANDARD POWER TAP SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1SSM-M100-MFA | MVOA-C1SSM-M100-MFA;SINGLE VOA STANDARD POWER MONITOR SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1SSM-M100-MFP | MVOA-C1SSM-M100-MFP;SINGLE VOA STANDARD POWER MONITOR SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1SSM-M100-MLC | MVOA-C1SSM-M100-MLC;SINGLE VOA STANDARD POWER MONITOR SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1SSM-M100-MLU | MVOA-C1SSM-M100-MLU;SINGLE VOA STANDARD POWER MONITOR SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1SSM-M100-MSC | MVOA-C1SSM-M100-MSC;SINGLE VOA STANDARD POWER MONITOR SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1SSM-M100-MSU | MVOA-C1SSM-M100-MSU;SINGLE VOA STANDARD POWER MONITOR SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1SSM-M101-MFA | MVOA-C1SSM-M101-MFA;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM FC/APC | 1 | |
| MVOA-C1SSM-M101-MFP | MVOA-C1SSM-M101-MFP;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM FC/PC | 1 | |
| MVOA-C1SSM-M101-MLC | MVOA-C1SSM-M101-MLC;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM LC/PC | 1 | |
| MVOA-C1SSM-M101-MLU | MVOA-C1SSM-M101-MLU;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM LC/APC | 1 | |
| MVOA-C1SSM-M101-MSC | MVOA-C1SSM-M101-MSC;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM SC/PC | 1 | |
| MVOA-C1SSM-M101-MSU | MVOA-C1SSM-M101-MSU;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM SC/APC | 1 | |
| MVOA-C1SSM-M102-MFA | MVOA-C1SSM-M102-MFA;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM FC/APC | 1 | |
| MVOA-C1SSM-M102-MFP | MVOA-C1SSM-M102-MFP;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM FC/PC | 1 | |
| MVOA-C1SSM-M102-MLC | MVOA-C1SSM-M102-MLC;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM LC/PC | 1 | |
| MVOA-C1SSM-M102-MLU | MVOA-C1SSM-M102-MLU;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM LC/APC | 1 | |
| MVOA-C1SSM-M102-MSC | MVOA-C1SSM-M102-MSC;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM SC/PC | 1 | |
| MVOA-C1SSM-M102-MSU | MVOA-C1SSM-M102-MSU;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM SC/APC | 1 | |
| N-OST-16X16-CA1-HMHNS | N-OST-16X16-CA1-HMHNS;S6000N Polatis OST 16X16 LSC/PC SM ETH MULTIPCL HT SWP NRML Standard | 1 | |
| N-OST-192X192-LU1-HMWNS | N-OST-192X192-LU1-HMWNS;S6000N OST 192X192 LC/PC SM ETH MULTIPCL HT SWP NRML Standard | 1 | |
| N-OST-256X256-LU1-HMWNS | N-OST-256X256-LU1-HMWNS;S6000N OST 256x256 LC/PC SM ETH MULTIPCL HT SWP NRML Standard | 1 | |
| N-OST-48X48-LA1-HMHNS | N-OST-48X48-LA1-HMHNS;Polatis N6000 OST 48x48 LC/APC SM ETH MULTIPCL HT SWP NRML Standard | 1 | |
| N-OST-96X96-LU1-HMWNS | N-OST-96X96-LU1-HMWNS;S6000N OST 96X96 LC/PC SM ETH MULTIPCL HT SWP NRML Standard | 1 | |
| NAS1756-24 | National Aerospace Standard NAS1756-24 Red-White 24" Remove Before Flight Streamer | 23 | |
| NAS1756-36 | National Aerospace Standard NAS1756-36 Red-White 36' Remove Before Flight Streamer | 20 | |
| NDETECH-7048 | STEEL MUTLI HOLE REFERENCE STANDARD>>> THE NOTCH SPECIFICATION IS 0.030'' X 0.030'' (45° ) CORNER NOTCH | 1 | |
| NDR-767 | REFERENCE STANDARD | 1 | |
| NDT 1016 | BOEING REFERENCE STANDARD | 3 | |
| NDT 1017 | BOEING REFERENCE STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 1018 | BOEING REFERENCE STANDARD | 3 | |
| NDT 1019 | BOEING REFERENCE STANDARD | 3 | |
| NDT 1020 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1021 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1033-10 | Alum to alum,100 thickness combo same defect standard | 4 | |
| NDT 1033-8 | REFERENCE STANDARD | 1 | |
| NDT 1033/3 | Reference standard | 1 | |
| NDT 1038 | Alum skin step to alum core damage defect standard | 3 | |
| NDT 1039-0.040/0.020 | REFERENCE STANDARD BOND TEST INS | 2 | |
| NDT 1039-0.040/0.040 | REFERENCE STANDARD BOND TEST INS | 2 | |
| NDT 1039-0.050/0.040 | REFERENCE STANDARD BOND TEST INS | 2 | |
| NDT 1039-0.063/0.056 | REFERENCE STANDARD BOND TEST INS | 2 | |
| NDT 1040 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1041 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1042 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1043 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1044 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1045 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1046 | GR/EP laminate 2 step to H.C core standard | 3 | |
| NDT 1048 | BOEING REFERENCE STANDARD | 4 | |
| NDT 1053 | REF. STANDARD | 1 | |
| NDT 1061 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1062 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1069B | Reference standard | 1 | |
| NDT 1072 | REFERENCE STANDARDS | 2 | |
| NDT 1073 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1074 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1079 | REFERENCE STANDARD | 1 | |
| NDT 1084 | BOEING REFERENCE STANDARD | 1 | |
| NDT 1085-032 | REFERENCE STANDARD | 3 | |
| NDT 1085-050 | REFERENCE STANDARD | 2 | |
| NDT 1085-080 | REFERENCE STANDARD | 2 | |
| NDT 1085-125 | REFERENCE STANDARD | 2 | |
| NDT 1086 - 032 | REFERENCE STANDARD | 3 | |
| NDT 1086 - 040 | REFERENCE STANDARD | 3 | |
| NDT 1086 - 050 | REFERENCE STANDARD | 3 | |
| NDT 1086 - 060 | REFERENCE STANDARD | 3 | |
| NDT 1086 - 070 | REFERENCE STANDARD | 3 | |
| NDT 1086 - 080 | REFERENCE STANDARD | 3 | |
| NDT 1086 - 120 | REFERENCE STANDARD | 3 | |
| NDT 1086 – 090 | REFERENCE STANDARD | 3 | |
| NDT 1086 – 100 | REFERENCE STANDARD | 3 | |
| NDT 1086 – 110 | REFERENCE STANDARD | 3 | |
| NDT 1086-032 | Boeing Standard, .032" Bottom Layer | 3 | |
| NDT 1086-040 | Boeing Standard, .040" Bottom Layer | 3 | |
| NDT 1086-050 | Boeing Standard, .050" Bottom Layer | 3 | |
| NDT 1086-060 | Boeing Standard, .060" Bottom Layer | 3 | |
| NDT 1086-070 | Boeing Standard, .070" Bottom Layer | 3 | |
| NDT 1086-080 | Boeing Standard, .080" Bottom Layer | 3 | |
| NDT 1086-090 | Boeing Standard, .090" Bottom Layer | 3 | |
| NDT 1086-100 | Boeing Standard, .100" Bottom Layer | 3 | |
| NDT 1086-110 | Boeing Standard, .110" Bottom Layer | 3 | |
| NDT 1086-120 | Boeing Standard, .120" Bottom Layer | 3 | |
| NDT 1087- 3 | BOEING REFERENCE STANDARD 737 PT 6 53-30-00 | 3 | |
| NDT 1087-3 | BOEING REFERENCE STANDARD | 3 | |
| NDT 1087-4 | REFERENCE STANDARD | 3 | |
| NDT 1087-6 | REF. STANDARD | 2 | |
| NDT 1087-7 | REF. STANDARD | 2 | |
| NDT 1087-8 | REF. STANDARD | 2 | |
| NDT 1088-072/050 | Boeing Reference Standard | 4 | |
| NDT 1088-144/050 | Boeing Reference Standard | 3 | |
| NDT 1094-090 | PHASED ARRAY REFERENCE STANDARD | 2 | |
| NDT 1095 | REFERENCE STANDARD | 2 | |
| NDT 1106 | Alum to alum core damaged defect standard | 2 | |
| NDT 126 | REFERENCE STANDARD | 1 | |
| NDT 185 | BOEING REFERENCE STANDARD | 1 | |
| NDT 188A | BOEING REFERENCE STANDARD | 1 | |
| NDT 189 | BOEING REFERENCE STANDARD | 2 | |
| NDT 192 | BOEING REFERENCE STANDARD | 1 | |
| NDT 194B | Boeing Reference standard w/Certs | 2 | |
| NDT 2001 | Alum to alum core disbond defect standard | 1 | |
| NDT 2797 | EMBRAER 170 REFERENCE STANDARD PT 6 53-10-00 pages 4-8 figure 1 sheets 1 and 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT 3019 | Boeing Reference Standard | 2 | |
| NDT 3030 | Boeing Reference Standard, 737 PT4 57-10-01: Page 5, Figure 2 | 2 | |
| NDT 3065 | REFERENCE STANDARD | 3 | |
| NDT 3065-STL | REFERENCE STANDARD | 2 | |
| NDT 3087R&D | NDT 3087 Reference Standard R&D | 1 | |
| NDT 3094 | REFERENCE STANDARD | 2 | |
| NDT 3104 | STANDARDS | 2 | |
| NDT 3116 | REFERENCE STANDARD | 2 | |
| NDT 3141 | BOEING REFERENCE STANDARD 737 PART 4 55-10-13 PAGE | 2 | |
| NDT 3152- A | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 3152- F | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 3152- K | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 3156 | BOEING REFERENCE STANDARD 737 PART 6 57-10-60 PAGE 11 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 4 | |
| NDT 3160 | REFERENCE STANDARD | 1 | |
| NDT 3164 | BOEING REFERENCE STANDARD 737 PART 6 57-10-60 PAGE 11 FIGURE 2. MATERIAL: 7150-T7. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 3166- 007 | BOEING REFERENCE STANDARD 737 PART 4 57-10-08 PAGE 6 FIGURE 2. MATERIAL: AIRCRAFT QUALITY ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 4 | |
| NDT 3166-003 | REFERENCE STANDARD | 3 | |
| NDT 3166-006 | REFERENCE STANDARD | 4 | |
| NDT 3166-007 | STANDARDS | 4 | |
| NDT 3168 | REFERENCE STANDARD | 3 | |
| NDT 3170 | 737 reference standard NDT 3170 | 5 | |
| NDT 3171 | BOEING STANDARD 737 PT4 57-10-06 | 5 | |
| NDT 3172 | BOEING STANDARD 737 PT4 57-10-05 PG 14 FG 2 | 3 | |
| NDT 3178-C | REFERENCE STANDARD | 3 | |
| NDT 3178-D | REFERENCE STANDARD | 3 | |
| NDT 3186 | REFERENCE STANDARD | 3 | |
| NDT 3187 | REFERENCE STANDARD | 3 | |
| NDT 3217-A | REFERENCE STANDARD | 1 | |
| NDT 3217-B | REFERENCE STANDARD | 1 | |
| NDT 3223 | REFERENCE STANDARD | 2 | |
| NDT 3230 | REFERENCE STANDARD | 2 | |
| NDT 3233 | REFERENCE STANDARD | 2 | |
| NDT 3249 | REFERENCE STANDARD | 1 | |
| NDT 3250 | REFERENCE STANDARD | 1 | |
| NDT 3285 | BOEING REFERENCE STANDARD 737 PART 6 53-30-63 PAGE 11 FIGURE 2. MATERIAL: 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 3289 | BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 3293 | BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 3299 | BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 3305A | REFERENCE STANDARDS | 2 | |
| NDT 396 | Reference standard | 6 | |
| NDT 398 | BOEING REFERENCE STANDARD 737 PT 4 53-10-01. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 4150 | Fiberglass to H.C panel on alum disbond defect standard | 1 | |
| NDT 4232 | Boeing Standard, 747 PT4 55-10-03: PG6 FIG2, with cert | 1 | |
| NDT 4233 | Boeing Standard, 747 PT4 55-10-03: PG7 FIG3, with cert | 1 | |
| NDT 4245 | Boeing Reference Standard, 747 PT4 54-40-25, PG6 FIG2 | 1 | |
| NDT 4246 | Reference Standard, 747 PT6 53-10-34: PG 6, FIG 3 | 1 | |
| NDT 4263 | REFERENCE STANDARD | 2 | |
| NDT 4264 | REFERENCE STANDARD | 2 | |
| NDT 5203 | Wing Front Spar Standard ID # R0059591 | 1 | |
| NDT 5204 | wing front Spar Standard ID# R0059592 | 1 | |
| NDT 5205 | wing Front Spar Standard ID# R0059593 | 1 | |
| NDT 5206 | Wing rear Spar Standard ID# R0061094 | 1 | |
| NDT 5207 | wing Rear Spar Standard ID# R0061095 | 1 | |
| NDT 5208 | Wing Rear Spar Standard ID# R61096 | 1 | |
| NDT 556-2 | Reference Standard | 1 | |
| NDT 6001 | Boeing Steel Reference Standard w/certs | 2 | |
| NDT 6005 | Boeing Standard | 2 | |
| NDT 6012 | Boeing Standard, 767, Joint 1, support 1 and 8 | 1 | |
| NDT 6013 | Boeing Standard, 767, Joint 1, support 2 and 7 | 1 | |
| NDT 6014 | Boeing Standard, 767, Joint 3, support 1 and 8 | 2 | |
| NDT 6015 | Boeing Standard, 767, Joint 3, support 2 and 7 | 2 | |
| NDT 6017 | Boeing titanium reference standard. | 2 | |
| NDT 6018 | Boeing Titanium Reference Standard w/certs | 2 | |
| NDT 6045 | Boeing Standard | 1 | |
| NDT 613 | REFERENCE STANDARD | 3 | |
| NDT 621 | REFERENCE STANDARD | 4 | |
| NDT 622 | REFERENCE STANDARD | 4 | |
| NDT 638 | REFERENCE STANDARD | 3 | |
| NDT 643 | REFERENCE STANDARD | 5 | |
| NDT 660 | REFERENCE STANDARD | 4 | |
| NDT 668 | REFERENCE STANDARD | 3 | |
| NDT 698 | REFERENCE STANDARD | 3 | |
| NDT 7005 | ULTRASONIC CALIBRATION STANDARD) | 2 | |
| NDT 7010A | REFERENCE STANDARD | 1 | |
| NDT 7010B | REFERENCE STANDARD | 1 | |
| NDT 7014 | EDDYCURRENT CALIBRATION STANDARD | 2 | |
| NDT 7015 C | CALIBRATION REFERENCE STANDARD | 1 | |
| NDT 7015B | ULTRASONIC CALIBRATION REFERENCE STANDARD | 1 | |
| NDT 7019A | REFERENCE STANDARD | 1 | |
| NDT 7019B | REFERENCE STANDARD | 1 | |
| NDT 7078 | ULTRASONIC CALIBRATION REFERENCE STANDARD | 1 | |
| NDT 745 | EDDYCURRENT CALIBRATION STANDARD | 2 | |
| NDT 786-A | CALIBRATION REFERENCE STANDARD | 2 | |
| NDT 786A | EDDYCURRENT CALIBRATION STANDARD | 2 | |
| NDT-1017-0.250 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1018-0.313 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1019-0.375 | Aluminum Bolt Hole Standard | 1 | |
| NDT-102 | Boeing Standard INC 625 customer supplies material | 1 | |
| NDT-1024 | BOEING REFERENCE STANDARD | 2 | |
| NDT-103 | Boeing Standard AL | 1 | |
| NDT-1039-.040-.056 | Reference Standard NDT-1039-.040-.056 | 1 | |
| NDT-1039-.040-.080 | Reference Standard NDT-1039-.040-.080 | 1 | |
| NDT-1039-.050-.080 | Reference Standard NDT-1039-.050-.080 | 1 | |
| NDT-1039-1.0/0.5 | Bond Reference Standard | 1 | |
| NDT-1039-1.0/1.0 | Bond Reference Standard | 1 | |
| NDT-1039-1.3/1.1 | Bond Reference Standard | 1 | |
| NDT-1039-1.6/1.4 | Bond Reference Standard | 1 | |
| NDT-1040 | Reference Standard | 2 | |
| NDT-1041 | Eddy current standard | 2 | |
| NDT-1042 | Eddy current standard | 2 | |
| NDT-1043 | Eddy current standard | 2 | |
| NDT-1045 | Reference Standard | 2 | |
| NDT-1048 | Reference Standard NDT-1048 | 4 | |
| NDT-1061 | Reference Standard | 2 | |
| NDT-1062 | Reference Standard | 2 | |
| NDT-1069A | Reference Standard NDT-1069A | 1 | |
| NDT-1069B | Reference Standard NDT-1069B | 1 | |
| NDT-1073 | Reference Standard | 2 | |
| NDT-1074 | Reference Standard | 2 | |
| NDT-1075 | Reference Standard | 2 | |
| NDT-1084-0.140 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.156 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.171 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.188 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.203 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.218 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.265 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.281 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.328 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.343 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1086-032 | Reference Standard NDT-1086-032 | 3 | |
| NDT-1086-050 | Reference Standard NDT-1086-050 | 3 | |
| NDT-1086-060 | Reference Standard NDT-1086-060 | 3 | |
| NDT-1086-070 | Reference Standard NDT-1086-070 | 3 | |
| NDT-1086-080 | Reference Standard NDT-1086-080 | 3 | |
| NDT-1086-090 | Reference Standard NDT-1086-090 | 3 | |
| NDT-1086-100 | Reference Standard NDT-1086-100 | 3 | |
| NDT-1086-110 | Reference Standard NDT-1086-110 | 3 | |
| NDT-1086-120 | Reference Standard NDT-1086-120 | 3 | |
| NDT-1088-072-050 | BLOCK STANDARD | 4 | |
| NDT-1091 | Reference Standard | 1 | |
| NDT-1094-040 | Reference Standard NDT-1094-040 | 2 | |
| NDT-1094-050 | Reference Standard NDT-1094-050 | 2 | |
| NDT-1094-070 | Reference Standard NDT-1094-070 | 2 | |
| NDT-1094-070-A | REFERENCE STANDARD | 2 | |
| NDT-1094-090 | Reference Standard NDT-1094-090 | 2 | |
| NDT-1094-090-A | REFERENCE STANDARD | 2 | |
| NDT-1094-110 | Reference Standard NDT-1094-110 | 1 | |
| NDT-1094-110-A | BOEING REFERENCE STANDARD 737 PART 4 53-30-07, 757 PART 4 53-00-02 FIG 2, 777 PART 4 53-00-02 PAGE 34 FIGURE 2. MATERIAL: ALUMINUM. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMAN | 2 | |
| NDT-1094-130-A | BOEING REFERENCE STANDARD 737 PART 4 53-30-07, 757 PART 4 53-00-02 FIG 2, 777 PART 4 53-00-02 PAGE 34 FIGURE 2. MATERIAL: ALUMINUM. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMAN | 2 | |
| NDT-1094-40 | REFERENCE STANDARD BOEING 737 | 2 | |
| NDT-1094-40-A | REFERENCE STANDARD BOEING 737 | 2 | |
| NDT-1099F | Boeing Standard | 1 | |
| NDT-3005 | Reference Standard NDT 3005 | 1 | |
| NDT-3007 | Reference Standard NDT 3007 | 1 | |
| NDT-3014B | Eddy current standard set | 1 | |
| NDT-3015 | Reference Standard NDT-3015 | 2 | |
| NDT-3021 | REFERENCE STANDARD B737 PT.6 7-50-01 | 6 | |
| NDT-3023 | REFERENCE STANDARD | 4 | |
| NDT-3050 | Ref Standard NDT-3050,B737 53-30-20 | 4 | |
| NDT-3065 | REFERENCE STANDARD NDT-3065 | 3 | |
| NDT-3065-STL | REFERENCE STANDARD NDT-3065-STL | 2 | |
| NDT-3091 | Reference Standard NDT-3091 | 2 | |
| NDT-396 | Reference Standard | 6 | |
| NDT-398 | Reference Standard | 2 | |
| NDT-761 | REFERENCE STANDARD | 2 | |
| NDT-762 | REFERENCE STANDARD | 2 | |
| NDT-766 | REFERENCE STANDARD | 2 | |
| NDT-768 | REFERENCE STANDARD | 2 | |
| NDT-772 | REFERENCE STANDARD | 2 | |
| NDT-773 | REFERENCE STANDARD | 2 | |
| NDT001-767T | Boeing Standard Part 6 53-60-94 pg 5 | 1 | |
| NDT002-767T | Boeing standard 6 52-30-92 Page 7 | 1 | |
| NDT006 | NDT REFERENCE STANDARD BOEING 767 | 1 | |
| NDT007-767T | Boeing Standard Part 6 53-80-93 pg 6 | 1 | |
| NDT009-767T | Boeing Standard Part 6 53-80-93 pg 4 | 1 | |
| NDT055 | Boeing Standard 57-10-07 PT6 PG677 | 1 | |
| NDT056 | Boeing Standard 57-10-07 PT6 PG678 | 1 | |
| NDT1002 | REFERENCE STANDARD | 1 | |
| NDT1004 | BOEING STANDARD, 737 PT6 51-00-00 PROCEDURE 14, PG11, FG6, 6AL-4V 787 PT6 51-00-05 PROCEDURE 1, PG10 | 1 | |
| NDT1016 | Boeing Standard .188" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 3 | |
| NDT1016 3.2-5.5MM | Special Boeing Type Reference Standard, PT6 51-00-00 PG 10, Fig 16 Detail III | 1 | |
| NDT1017 | Boeing Standard .250" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 2 | |
| NDT1018 | Boeing Standard .313" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 3 | |
| NDT1019 | Boeing Standard .375" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 3 | |
| NDT1020 | Boeing Standard .438" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 2 | |
| NDT1021 | Boeing Standard .500" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 2 | |
| NDT1022 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, .188" Diameter | 3 | |
| NDT1022-2.0 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII | 1 | |
| NDT1022-27/6 | BOEING REFERENCE STANDARD 767 51-00-14 PT 6 FIG 3, 757 Part 6 51-00-14 Page 8 Figure 3. SINGLE STANDARD WITH ALL SIX HOLES. MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1023 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, .250" Diameter | 2 | |
| NDT1024 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, .313" Diameter | 2 | |
| NDT1025 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, .375" Diameter | 2 | |
| NDT1026 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, .438" Diameter | 2 | |
| NDT1027 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, .500" Diameter | 2 | |
| NDT1027-.125 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, .125 Hole Diameter | 1 | |
| NDT1027-.156 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, .156 Hole Diameter | 1 | |
| NDT1027-.9125 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, .9125 Hole Diameter | 1 | |
| NDT1027-0.188 | NDT STANDARD | 2 | |
| NDT1027-1.420 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, 1.420 Hole Diameter | 1 | |
| NDT1027-1.720 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, 1.720 Hole Diameter | 1 | |
| NDT1027-1.750 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, 1.750 Hole Diameter | 1 | |
| NDT1031 | Boeing Standard, 707 PT6 57-10-07 FIG93: PG1525 FIG93 SHEET7 | 1 | |
| NDT1033 | Reference standard | 1 | |
| NDT1033-10 | Boeing Standard, 737 PT 4 51-40-00 Fig 1 Pg 6-7, Sheet 1-2, Procedure 1 | 4 | |
| NDT1033/LHTB0156 | NDT reference standard | 1 | |
| NDT1033N | REFERENCE STANDARD | 1 | |
| NDT1035 | Boeing Standard, 757 PT6 54-10-02:PG5 FIG2 | 1 | |
| NDT1036 | Boeing Standard, 707 PT4 54-40-07 FIG2: PG24 FIG2 SHEET12 | 1 | |
| NDT1037 | Metal Reference standard | 1 | |
| NDT1037-0.032 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.036 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.040 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.050 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.063 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.072 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.080 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.090 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.100 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.110 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.125 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1038 | Boeing Standard, 787 PT4 51-00-05 | 3 | |
| NDT1039-.016/.016 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.016/.020 | Boeing Reference Standard 737 PT4 53-30-01 PG5 FIG2 | 1 | |
| NDT1039-.025/.025 | Boeing Reference Standard 737 PT4 53-30-01 PG5 FIG2 | 1 | |
| NDT1039-.032/.032-I625 | Boeing Reference Standard, 757 PT4 51-00-05:PG8 FIG2, Inconel 625 | 1 | |
| NDT1039-.036/.036 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.040/.016 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.040/.020 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.040/.040 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.040/.063 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.050/.032 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.050/.040 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.050/.063 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.050/.080 | Boeing Reference Standard 737 PT4 53-30-01 PG5 FIG2 | 1 | |
| NDT1039-.063/.056 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.063/.063 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.063/.080 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2.. | 1 | |
| NDT1039-.080/.025 | Boeing Reference Standard 737 PT4 53-30-01 PG5 FIG2 | 1 | |
| NDT1039-.080/.063 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.080/.100 | Boeing Reference Standard 737 PT4 53-30-01 PG5 FIG2 | 1 | |
| NDT1039-0.016/0.016 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.016". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.016/0.020 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.020". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.016/0.025 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.025". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.016/0.100 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.100". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.020/0.020 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.016". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.020/0.025 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.020"/0.025". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.020/0.032 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.020"/0.032". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.025/0.025 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.030/0.030 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.030"/0.030". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.032/0.032 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.032"/0.032". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.032/0.036 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.032/0.050 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.032"/0.050". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.036/0.036 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.040/0.020 | BOEING REFERENCE STANDARD | 2 | |
| NDT1039-0.040/0.032 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.040/0.036 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.040/0.040 | BOEING REFERENCE STANDARD | 2 | |
| NDT1039-0.040/0.050 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.040"/0.050". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.040/0.056 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.045/0.040 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.050/0.040 | BOEING REFERENCE STANDARD | 2 | |
| NDT1039-0.050/0.056 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.050/0.063 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.050/0.080 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.063/0.040 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.063/0.056 | BOEING REFERENCE STANDARD | 2 | |
| NDT1039-0.063/0.063 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.063/0.080 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 PAGE 5 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.071/0.063 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.080/0.025 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.080/0.063 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1039-0.080/0.100 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.52/0.52 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2, T1= .52mm T2=.52mm | 1 | |
| NDT1039-040/020 | REFERENCE STANDARD, PHYSICAL | 1 | |
| NDT1039-040/040 | REFERENCE STANDARD, PHYSICAL PROPER | 1 | |
| NDT1039-1.0/0.5 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-1.0/1.0 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-1.3/1.1 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-1.3/1.6 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-1.6/0.5 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-1.6/1.4 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-1.6/1.6 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-16/16 | REFERENCE STANDARD | 1 | |
| NDT1039-2.0/1.6 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2, (.080/.063) size in mm | 1 | |
| NDT1039-20/16 | REFERENCE STANDARD | 1 | |
| NDT1039-T1/T2 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1039-t1/t2 | Boeing Standard 737 PT4 51-00-05 PG 7..*t1 & t2 are material thickness, customer must provide thickness dimensions | 2 | |
| NDT104 | Boeing Standard, 707 PT4 57-40-07 FIG2: PG12C SHEET8 | 1 | |
| NDT1040 | Boeing Standard 0.188" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
| NDT1041 | Boeing Standard 0.250" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
| NDT1042 | Boeing Standard 0.313" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
| NDT1043 | Boeing Standard 0.375" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
| NDT1043CS | BOEING COUNTERSINK REFERENCE STANDARD 737 PT6 51-00-00 PROCEDURE 19, 0.375” DIAMETER 100° COUNTERSINK HOLE. MATERIAL: 43404340M STEEL. SIZE: 2.0" X .375" THICK( ROUNDSQUARE. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT1044 | Boeing Standard 0.438" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
| NDT1045 | Boeing Standard 0.500" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
| NDT1046 | Boeing Composite Standard, 777 PT4 51-00-04:PG3 FIG1, 3PLY, 5" x 3" x1". Includes C-Scan and Certificate of Conformance. | 3 | |
| NDT1046-.032/.050 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, .032 min and .050 max thickness 2024-T3 | 1 | |
| NDT1046-.75/1.5mm | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, .75mm/1.5mm | 1 | |
| NDT1046-10-20 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 10 PLY / 20 PLY. Includes C-Scan and Certificate of Conformance. | 1 | |
| NDT1046-10/30 | REFERENCE STANDARD | 1 | |
| NDT1046-12-24 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 12 PLY / 24 PLY. Includes C-Scan and Certificate of Conformance. | 1 | |
| NDT1046-12/24 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, 12PLY/24PLY | 1 | |
| NDT1046-20-31 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 20 PLY / 31 PLY. Includes C-Scan and Certificate of Conformance. | 1 | |
| NDT1046-20/31 | REFERENCE STANDARD | 1 | |
| NDT1046-3 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, 3 PLY | 1 | |
| NDT1046-3-10 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 10 PLY. Includes C-Scan and Certificate of Conformance. | 1 | |
| NDT1046-3-11 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 11 PLY. Includes C-Scan and Certificate of Conformance. | 1 | |
| NDT1046-3-5 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 5 PLY. Includes C-Scan and Certificate of Conformance. | 1 | |
| NDT1046-3-7 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 7 PLY. Includes C-Scan and Certificate of Conformance. | 1 | |
| NDT1046-3-9 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 9 PLY. Includes C-Scan and Certificate of Conformance. | 1 | |
| NDT1046-3/10 | REFERENCE STANDARD | 1 | |
| NDT1046-3/11 MOD | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 11 PLY. Includes C-Scan and Certificate of Conformance. | 1 | |
| NDT1046-3/13 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, 3 PLY/13PLY | 1 | |
| NDT1046-3/5 | REFERENCE STANDARD | 1 | |
| NDT1046-3/6 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, 3 PLY/6PLY | 1 | |
| NDT1046-3/7 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, 3 PLY/7PLY | 1 | |
| NDT1046-5/9 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, 5PLY/9PLY | 1 | |
| NDT1046-6-10 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 6 PLY / 10 PLY. Includes C-Scan and Certificate of Conformance. | 2 | |
| NDT1046-6/10 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, 6PLY/10PLY | 2 | |
| NDT1046-7/26 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, 7PLY/26PLY | 1 | |
| NDT1046-8/NDT1046-3 | FIBERGLASS SKIN REFERENCE STANDARD, 8 PLIES AND 3 PLIES | 1 | |
| NDT1047 | Boeing Standard, 737 PT6 51-00-00:PG5 FIG1 Procedure 22 | 3 | |
| NDT1047A | Boeing Standard, 747 PT6 51-00-00:PG6 FIG22 DETAILI, 7075T6 | 1 | |
| NDT1048 | Flash Head Fastener Reference Standard | 4 | |
| NDT1048-2024T3 | Boeing Standard, PT6 51-00-00:PG11 FIG4 DETAIL IV, 2024-T3 Aluminum | 1 | |
| NDT1048-4.8/8.7 | Boeing Standard, Multi Hole, Certified to 737 PT6 51-00-00 FIG16 PG10, 7075-T6 w/ .020 x.020 x .005 MAX Width, PN will be NDT1048-4.8 NDT1048-5.1 NDT1048-5.5 NDT1048-6.3 NDT1048-6.7 NDT1048-7.1 NDT1048-7.9 NDT1048-8.3 NDT1048-8.7 | 1 | |
| NDT1048-7075T6 | Boeing Standard, PT6 51-00-00:PG11 FIG4 DETAIL IV, 7075-T6 Aluminum | 1 | |
| NDT1049 | REFERENCE STANDARD | 1 | |
| NDT105 | Boeing Standard, 707 PT4 57-40-07 FIG2: PG12C FIG2 SHEET8 | 1 | |
| NDT106 | Boeing Standard, 707 PT4 57-40-07 FIG2: PG12C FIG2 SHEET8 | 1 | |
| NDT1061 | Boeing Standard, 737 PT6 51-00-00:PG12 FIG13 DETAILV | 2 | |
| NDT1062 | Boeing Standard, 737 PT6 51-00-00:PG11 FIG24 DETAILV | 2 | |
| NDT1069-070 | Boeing Standard, 737 PT6 53-30-25:PG14 FIG3 SHEET1, No Feeties, Etching, or Bond NEEDED | 1 | |
| NDT1069A | Boeing Standard, 737 PT6 53-30-25:PG14 FIG3 SHEET1 | 1 | |
| NDT1069A-0.010 DEEP | Boeing Standard w/ 0.010 deep notch | 1 | |
| NDT1069A-0.010 DEEP AND 0.018 D | R&D Standard | 1 | |
| NDT1069A-0.010 DEEP/.045 SKIN | Boeing Standard, .010 deep notch in .045 (-1 layer) skin, no feeties | 1 | |
| NDT1069A-036-5% | Boeing Standard, .036 thick, 5% IACS from 2024T3 Bare, .5 long x 50% deep notch | 1 | |
| NDT1069A-036M | Boeing Standard, .036 thick, 2.0 MILLED SECTION, .5 long x 50% deep notch, 2024T3 | 1 | |
| NDT1069A-040 | Boeing Standard, .040 thick, .5 long x 50% deep notch, 2024T3 | 1 | |
| NDT1069A-040-5% | Boeing Standard, .040 thick, 5% IACS from 2024T3 Bare, .5 long x 50% deep notch | 1 | |
| NDT1069A-045 | Boeing Standard, .045 thick, .5 long x 50% deep notch, 2024T3 | 1 | |
| NDT1069A-045-5% | Boeing Standard, .045 thick, 5% IACS from 2024T3 Bare, .5 long x 50% deep notch | 1 | |
| NDT1069B | Boeing Standard, 737 PT6 53-30-25:PG14 FIG3 SHEET2 | 1 | |
| NDT107 | Boeing Standard, 707 PT4 57-40-07 FIG2: PG12C FIG2 SHEET8 | 1 | |
| NDT1071 | BOEING REFERENCE STANDARD 767 Part 4 51-00-22 Page 4 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1072 | Boeing Standard, 747 PT6 51-00-00:PG11 FIG13 DETAIL IV | 2 | |
| NDT1073 | Boeing Standard, 747 PT6 51-00-00:PG12 FIG13 DETAILV | 2 | |
| NDT1074 | Boeing Standard, 747 PT6 51-00-00:PG11 FIG24 DETAILV | 2 | |
| NDT1075 | Boeing Standard, 737 PT6 51-00-00: PG14 FIG13 DETAILVII | 2 | |
| NDT1077 | Boeing Standard | 1 | |
| NDT1079 | Reference Standard NDT1079 | 1 | |
| NDT108 | Boeing Standard, 707 PT4 57-40-07 FIG2: PG12C FIG2 SHEET8 | 1 | |
| NDT1083 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1083-.157 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-.188 | Boeing Standard 757 PT6 51-00-17 PG 7 | 1 | |
| NDT1083-.250 | Boeing Standard 757 PT6 51-00-17 PG 7 | 1 | |
| NDT1083-.313 | Boeing Standard 757 PT6 51-00-17 PG 7 | 1 | |
| NDT1083-.375 | Boeing Standard 757 PT6 51-00-17 PG 7 | 1 | |
| NDT1083-.438 | Boeing Standard 757 PT6 51-00-17 PG 7 | 1 | |
| NDT1083-.500 | Boeing Standard 757 PT6 51-00-17 PG 7 | 1 | |
| NDT1083-.5625 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-.625 | Boeing Standard 757 PT6 51-00-17 PG 7 | 1 | |
| NDT1083-.630 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-.750 | Boeing Standard 757 PT6 51-00-17 PG7 | 1 | |
| NDT1083-.812 | REFERENCE STANDARD (0.812 INCH) | 1 | |
| NDT1083-.851 | Boeing Standard .851 PT6 51-00-00:FIG19 PG10 DetailIII | 1 | |
| NDT1083-.875 | Boeing Standard 757 PT6 51-00-17 PG6 | 1 | |
| NDT1083-0.5620 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.563 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.625 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.630 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.688 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.695 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.750 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 2 | |
| NDT1083-0.787 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.812 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.813 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.875 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.938 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0_750 | REFERENCE STANDARDS | 2 | |
| NDT1083-1.00 | Boeing Standard 1.0", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
| NDT1083-1.000 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-1.1875 | Boeing Standard 1.1875", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII | 1 | |
| NDT1083-1.19 | Boeing Standard 1.19", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII | 1 | |
| NDT1083-1.25 | Boeing Standard 1.25", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
| NDT1083-1.286 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-1.347 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-3.2/8.7 | REFERENCE STANDARD BOEING 12 HOLE | 1 | |
| NDT1083.157 | Boeing Reference Standard 0.157" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 1 | |
| NDT1083.219 | Boeing Reference Standard 0.219" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 1 | |
| NDT1083.282 | Boeing Reference Standard 0.282" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 1 | |
| NDT1083.344 | Boeing Reference Standard 0.344" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 1 | |
| NDT1083.407 | Boeing Reference Standard 0.407" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 1 | |
| NDT1083.469 | Boeing Reference Standard 0.469" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 1 | |
| NDT1083.516 | Boeing Reference Standard 0.516" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 1 | |
| NDT1083.5625 | Boeing Standard 0.5625", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
| NDT1083.563 | Boeing Standard 0.563", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
| NDT1083.625 | Boeing Standard 0.625", 737/747 PT6 51-00-00:FIG19 PG10 Detail III or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
| NDT1083.6875 | Boeing Standard 0.6875", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
| NDT1083.750 | Boeing Standard 0.750", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
| NDT1083.875 | Boeing Standard 0.875", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
| NDT1084 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-.0563 | BOEING STANDARD, 737 PT6 51-00-00 PG 8 FIG 3 PROCEDURE 16, .0563" HOLE DIAMETER | 1 | |
| NDT1084-.0625 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII, .0625 (1/16") Diameter Hole | 2 | |
| NDT1084-.0688 | BOEING STANDARD, 737 PT6 51-00-00 PG 8 FIG 3 PROCEDURE 16, .0688 HOLE DIAMETER | 1 | |
| NDT1084-.0750 | BOEING STANDARD, 737 PT6 51-00-00 PG 8 FIG 3 PROCEDURE 16, .0750 HOLE DIAMETER | 2 | |
| NDT1084-.096 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-.125 | Boeing Standard .125 hole 737/747 PT 6 51-00-00 PH10 FIG 16 DETAIL III | 2 | |
| NDT1084-.129 | Boeing Standard 767 Part 6 51-00-16 page 7 | 1 | |
| NDT1084-.156 | Boeing Standard .156" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 1 | |
| NDT1084-.156/.5 | Boeing Standard, 18 holes, 2 columns, 1 with notches and 1 without, 2024-T3, 737/747 PT6 51-00-00: PG8 FIG3 Procedure 16, .156, .171, .1875, .203, .218, .25, .265, .281, .312, .328, .343, .375, .39, .406, .437, .453, .468, .5 | 1 | |
| NDT1084-.156/.5-1 | Boeing Standard, 18 holes, 4 columns, 3 with notches and 1 without, 2024-T3, 737/747 PT6 51-00-00: PG8 FIG3 Procedure 16, .156, .171, .1875, .203, .218, .25, .265, .281, .312, .328, .343, .375, .39, .406, .437, .453, .468, .5 | 1 | |
| NDT1084-.157 | Boeing Standard .157" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 2 | |
| NDT1084-.161 | Boeing Standard 767 PART6, 51-00-16..page 7 | 1 | |
| NDT1084-.218 | Boeing Standard .218: Hole,737/747 PT6 51-00-00: PG 10 FIG 16 DETAIL III | 1 | |
| NDT1084-.265 | Boeing Standard 767 Part 6 51-00-16 page 7 | 1 | |
| NDT1084-.281 | Boeing Standard 767 Part 6 51-00-16 Page 7 | 1 | |
| NDT1084-.531 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084-.546/.937-1 | Boeing Standard, 8 holes, 4 columns, 3 with notches and 1 without, 2024-T3, 737/747 PT6 51-00-00: PG8 FIG3 Procedure 16, 35/64, 37/64, 41/64, 11/16, 49/64, 13/16, 7/8, 15/16 | 1 | |
| NDT1084-.562 | Boeing Standard .562" Hole, 737/747 PT6 51-00-00: PG10 FIG16 DETAIL III | 1 | |
| NDT1084-.5625 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-.563 | Boeing Standard .563" Hole, 737/747 PT6 51-00-00: PG10 FIG16 DETAIL III | 1 | |
| NDT1084-.625 | Boeing Standard, .625" Hole, 737/747 PT6 51-00-00: PG10 FIG16 DETAIL III | 1 | |
| NDT1084-.688 | Boeing Standard, .688" Hole, 737/747 PT6 51-00-00: PG10 FIG16 DETAIL III | 1 | |
| NDT1084-.689 | Boeing Standard, .689" Hole, 737/747 PT6 51-00-00: PG10 FIG16 DETAIL III | 1 | |
| NDT1084-.750 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII .750" hole diameter | 1 | |
| NDT1084-.813 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084-.875 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII .875" hole diameter | 1 | |
| NDT1084-.938 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084-0,125 | EDDY CURRENT REFERENCE STANDARD | 1 | |
| NDT1084-0,156 | EDDY CURRENT REFERENCE STANDARD | 1 | |
| NDT1084-0.09375 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.122 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.125 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.127 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.129 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.156 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.157 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.161 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.200 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.218 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.219 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.234 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.265 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.281 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.297 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.328 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.359 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.391 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.422 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.453 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.469 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.484 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.531 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.562 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.5625 | REFERENCE STANDARD PROCEDURE | 1 | |
| NDT1084-0.563 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.578 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.594 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.600 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.625 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-0.630 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.640 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.656 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.675 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.688 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.689 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.695 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.700 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.719 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.75 | REFERENCE STANDARD PROCEDURE | 1 | |
| NDT1084-0.750 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-0.787 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.813 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.875 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.906 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.938 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.XXX | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0125 | BOEING REFERENCE STANDARD 737 PART 6 51-00-00 PAGE 9 FIGURE 3, 777 PART 6 51-00-02 PAGE 7 FIGURE 3,777-200/300 PART 6 51-00-02 PAGE 9 FIGURE 3. MATERIAL: 2024-T3. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. PROVIDE CUSTOM | 1 | |
| NDT1084-0_938 | REFERENCE STANDARDS | 1 | |
| NDT1084-1-8 | BOEING STANDARD, 767 PT6 51-00-16 PG 9 FIG 3, .125" HOLE DIAMETER | 1 | |
| NDT1084-1.00 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.0" hole diameter | 2 | |
| NDT1084-1.000 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.062 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.100 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.124 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.125 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.125" hole diameter | 2 | |
| NDT1084-1.187 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.200 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.200" hole diameter | 1 | |
| NDT1084-1.25 | REFERENCE STANDARD PROCEDURE | 2 | |
| NDT1084-1.250 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.250" hole diameter | 1 | |
| NDT1084-1.300 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.312 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.3605 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.375 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.375" hole diameter | 2 | |
| NDT1084-1.390 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.390" hole diameter | 1 | |
| NDT1084-1.400 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.420 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.420" hole diameter | 1 | |
| NDT1084-1.437 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.5 | REFERENCE STANDARD PROCEDURE | 1 | |
| NDT1084-1.50/T20 | REFERENCE STANDARD PROCEDURE | 1 | |
| NDT1084-1.500 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.500" hole diameter | 1 | |
| NDT1084-1.590 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.590" hole diameter | 1 | |
| NDT1084-1.625 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.625" hole diameter | 2 | |
| NDT1084-1.750 | Boeing Reference Standard,737 PT6 51-00-00: FIG16 PG10 DETAILIII, 1.75" hole diameter | 1 | |
| NDT1084-1.750-7075T6 | Boeing Reference Standard,737 PT6 51-00-00: FIG16 PG10 DETAILIII, 7075T6 Aluminum | 1 | |
| NDT1084-1.795 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.795" hole diameter | 1 | |
| NDT1084-1.875 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.875" hole diameter | 1 | |
| NDT1084-1.940 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.985 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.985" hole diameter | 1 | |
| NDT1084-1.9855 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-11.5MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-14.4MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-14.6MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-17.4MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-17.5MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-2.00 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 2.0" hole diameter | 1 | |
| NDT1084-2.000 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-2.250 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-2.650 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 2.650" hole diameter | 1 | |
| NDT1084-27.6MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-3.2/8.7 | REFERENCE STANDARD BOEING 12 HOLE | 1 | |
| NDT1084-5-32 | BOEING STANDARD, 767 PT6 51-00-16 PG 9 FIG 3, .156" HOLE DIAMETER | 1 | |
| NDT1084-600 | BOEING STANDARD, 737 PT6 51-00-00 PG 8 FIG 3 | 1 | |
| NDT1084-7-32 | BOEING STANDARD, 737/757 PT6 51-00-00 PG 8 FIG 3 PROCEDURE 16, .218" HOLE DIAMETER | 1 | |
| NDT1084-7MM | Boeing Standard 767 Part 6 51-00-16 page 7, 7mm Diameter Hole | 1 | |
| NDT1084.125 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 2 | |
| NDT1084.156 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.157 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 2 | |
| NDT1084.158 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.188 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.195 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.218 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.219 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.245 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.250 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.275 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.281 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.282 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.297 | Boeing Reference Standard, 19/64" Hole, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.313 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.343 | Boeing Reference Standard, 11/32" Hole, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.344 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.407 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIIII | 1 | |
| NDT1084.469 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.500 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.531 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.547 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.562 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.625 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.688 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.750 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.875 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1085 | REF STANDARD | 1 | |
| NDT1085-032 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .032" Top Layer | 3 | |
| NDT1085-036 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .036" Top Layer | 3 | |
| NDT1085-050 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .050" Top Layer | 2 | |
| NDT1085-063 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .063" Top Layer | 2 | |
| NDT1085-071 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .071" Top Layer | 2 | |
| NDT1085-080 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .080" Top Layer | 2 | |
| NDT1085-090 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .090" Top Layer | 2 | |
| NDT1085-100 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .100" Top Layer | 2 | |
| NDT1085-112 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .112" Top Layer | 2 | |
| NDT1085-125 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .125" Top Layer | 2 | |
| NDT1085-80 | REFERENCE STANDARD | 2 | |
| NDT1086-032 | Boeing Standard, 737 PT4 53-30-05:PG10 FIG2 | 3 | |
| NDT1086-040 | Boeing Standard, 737 PT4 53-30-05:PG10 FIG2 | 3 | |
| NDT1086-050 | Boeing Standard, 737 PT4 53-30-05:PG10 FIG2 | 3 | |
| NDT1086-060 | Boeing Standard, 737 PT4 53-30-05:PG10 FIG2 | 3 | |
| NDT1086-070 | Boeing Standard, 737 PT4 53-30-05:PG10 FIG2 | 3 | |
| NDT1086-080 | Boeing Standard, 737 PT4 53-30-05:PG10 FIG2 | 3 | |
| NDT1086-090 | Boeing Standard, 737 PT4 53-30-05:PG10 FIG2 | 3 | |
| NDT1086-1.286 | Boeing Standard, 737 PT4 53-30-05:PG10 FIG2, 1.286" | 1 | |
| NDT1086-100 | Boeing Standard, 737 PT4 53-30-05:PG10 FIG2 | 3 | |
| NDT1086-110 | Boeing Standard, 737 PT4 53-30-05:PG10 FIG2 | 3 | |
| NDT1086-120 | Boeing Standard, 737 PT4 53-30-05:PG10 FIG2 | 3 | |
| NDT1086-130 | Boeing Standard, 737 PT4 53-00-01: Pg 8 Fig 2 | 1 | |
| NDT1086-140 | Boeing Standard, 737 PT4 53-00-01:PG8 FIG 2 | 1 | |
| NDT1086-40 | REFERENCE STANDARD | 1 | |
| NDT1086-50 | REFERENCE STANDARD | 1 | |
| NDT1086-60 | REFERENCE STANDARD | 1 | |
| NDT1087 | REF. STANDARD | 1 | |
| NDT1087-1 | Boeing Standard, 737/747 PT6 53-30-00:PG10 FIG9 DETAIL II, .050" over .040" | 4 | |
| NDT1087-10 | Boeing Dual Frequency Standard, .120" Upper sheet - .080" Lower sheet | 2 | |
| NDT1087-11 | Boeing Dual Frequency Standard, .140" Upper sheet - .080" Lower sheet | 2 | |
| NDT1087-12 | BOEING REFERENCE STANDARD, 757 Part 6 53-00-11. Plate Thickness: Upper 1 - 0.120 / Lower 2 - 0.063. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1087-13 | BOEING REFERENCE STANDARD, 757 Part 6 53-00-11. Plate Thickness: Upper 1 - 0.140 / Lower 2 - 0.063. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1087-14 | BOEING REFERENCE STANDARD, 757 Part 6 53-00-11. Plate Thickness: Upper 1 - 0.160 / Lower 2 - 0.100. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1087-2 | Boeing Standard, 737/747 PT6 53-30-00:PG10 FIG9 DETAIL II, .071" over .040" | 3 | |
| NDT1087-3 | Boeing Standard, 737/747 PT6 53-30-00:PG10 FIG9 DETAIL II, .080" over .040" | 3 | |
| NDT1087-4 | Boeing Standard, 737/747 PT6 53-30-00:PG10 FIG9 DETAIL II, .090" over .040" | 3 | |
| NDT1087-5 | Boeing Dual Frequency Standard, .100" Upper sheet - .050" Lower sheet | 2 | |
| NDT1087-6 | Boeing Dual Frequency Standard, .071" Upper sheet - .063" Lower sheet | 2 | |
| NDT1087-7 | Boeing Dual Frequency Standard, .090" Upper sheet - .080" Lower sheet | 2 | |
| NDT1087-8 | Boeing Dual Frequency Standard, .100" Upper sheet - .090" Lower sheet | 2 | |
| NDT1087-9 | Boeing Dual Frequency Standard, .125" Upper sheet - .125" Lower sheet | 2 | |
| NDT1087-P1 | Boeing Dual Frequency Standard Acrylic Guides (Pair) | 3 | |
| NDT1087-R&D | Boeing Standard w/ 12 NOTCHES, 737/747 PT6 53-30-00:PG10 FIG9 DETAIL II, .080" over .040" | 1 | |
| NDT1087-R&D V2 | Boeing Standard w/ 9 NOTCHES, 737/747 PT6 53-30-00:PG10 FIG9 DETAIL II, .080" over .040" | 1 | |
| NDT1088-036X2/050-B | Boeing Reference Standard, Bare, Drawing Provided | 1 | |
| NDT1088-036X2/050-C | Boeing Reference Standard, Drawing Provided | 1 | |
| NDT1088-050/063 | Boeing Standard, 757/767 PT6 53-00-13:PG7 FIG3, 747 PT6 53-30-17:PG6 FIG1 | 1 | |
| NDT1088-060/050 | Boeing Standard | 1 | |
| NDT1088-062/071 | Boeing Standard, 757/767 PT6 53-00-13:PG7 FIG3, 747 PT6 53-30-17:PG6 FIG1 | 1 | |
| NDT1088-072/050 | Boeing Standard, 757 PT6 53-30-09:PG7 FIG2/737 PT6 53-30-24:PG7 FIG1 | 4 | |
| NDT1088-095/071 | Boeing Standard, 747 PT6 53-30-17:PG10 FIG4 | 1 | |
| NDT1088-112/100 | Boeing Standard, 757/767 PT6 53-00-13:PG7 FIG3, 747 PT6 53-30-17:PG6 FIG1 | 2 | |
| NDT1088-120/050 | Boeing Standard | 1 | |
| NDT1088-133/071 | Boeing Standard, 747 PT6 53-30-17:PG11 FIG5 | 1 | |
| NDT1088-144/050 | Boeing Standard, 737 PT6 53-30-24:PG8 FIG2 | 3 | |
| NDT1088-156/100 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1088-180/180 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1088-250/250 | Boeing Standard, Drawing Provided, Figure 2 | 1 | |
| NDT1088-A | Boeing Standard | 1 | |
| NDT1088-B | Boeing Standard | 1 | |
| NDT1088-C | Boeing Standard | 1 | |
| NDT1088-D | Boeing Standard | 1 | |
| NDT1088-E | Boeing Standard | 1 | |
| NDT1088-F | Boeing Standard | 1 | |
| NDT1089 | REFERENCE STANDARD | 1 | |
| NDT1089-.500 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-.626 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-.656 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII .656 Diameter | 1 | |
| NDT1089-.750 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII .750 Diameter | 1 | |
| NDT1089-0.125 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16,BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø0.125" | 2 | |
| NDT1089-0.157 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø0.157" | 1 | |
| NDT1089-0.188 | NDT STANDARD | 2 | |
| NDT1089-0.563 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance.Hole Ø 0.563" | 1 | |
| NDT1089-0.600 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. HOLE SIZE: 0.600". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-0.625 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.625" | 1 | |
| NDT1089-0.626 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.626" | 1 | |
| NDT1089-0.656 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-0.660 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-0.688 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.688" | 1 | |
| NDT1089-0.750 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.750" | 1 | |
| NDT1089-0.813 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.813" | 1 | |
| NDT1089-0.875 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.875" | 1 | |
| NDT1089-0.938 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.938" | 1 | |
| NDT1089-0_125 | REFER STANDARDS | 2 | |
| NDT1089-1.00 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII 1.0 Diameter | 1 | |
| NDT1089-1.000 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 1.000" | 1 | |
| NDT1089-1.25 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII 1.25 Diameter | 1 | |
| NDT1089-1.375 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII 1.375 Diameter | 1 | |
| NDT1089-1.438 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII 1.438 Diameter | 1 | |
| NDT1089-1.500 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII 1.5" Diameter | 1 | |
| NDT1089-1.9855 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16. MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-4.8/15.5 | Boeing Standard 737/767 PT6 51-00-00:PG 7 FG 3 Procedure 17, 22 Hole Std, 4.8mm, 5.1mm, 5.5mm, 6.3mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm, 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm,12.5mm, 13mm, 13.5mm, 14mm, 14.5mm, 15mm, 15.5mm with .050 corner notc... | 1 | |
| NDT1091 | Boeing Standard, PT6 51-00-00:PG7 FIG15 DETAIL I | 1 | |
| NDT1092-.040/.016 | Reference Standard 737 PT9 51-00-03 PG 9 FG 2 | 1 | |
| NDT1092-.040/.032 | Reference Standard 737 PT9 51-00-03 PG 9 FG 2 | 1 | |
| NDT1092-.040/.052 | Reference Standard 737 PT9 51-00-03 PG 9 FG 2 | 1 | |
| NDT1092-.050/.040 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2, .050/.040. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1092-.071/.056 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2 .071/.056. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1092-.080/.040 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2 .080/.040. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1092-050/040 | REFERENCE STANDARD, PHYSICAL | 1 | |
| NDT1092-1.02/.8mm | Reference Standard 737 PT9 51-00-03 PG 9 FG 2, 1.02mm Top, .8mm Bottom | 1 | |
| NDT1093-.050/.040 | Reference Standard 737 PT9 51-00-03 PG 10 FG 3 | 1 | |
| NDT1093-.071/.056 | Reference Standard 737 PT9 51-00-03 PG 10 FG 3 | 1 | |
| NDT1093-.080/.040 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1093-050/040 | REFERENCE STANDARD, PHYSICAL | 1 | |
| NDT1093-1.27/1.02mm | Reference Standard 737 PT9 51-00-03 PG 10 FG 3, 1.27mm Top, 1.02mm Bottom | 1 | |
| NDT1093-1.8/1.42mm | Reference Standard 737 PT9 51-00-03 PG 10 FG 3, 1.8mm Top, 1.42mm Bottom | 1 | |
| NDT1094-040 | Boeing Standard, 737/747 PT4 53-00-02 PG 22 FIG2, .072" top plate .040" bottom plate | 2 | |
| NDT1094-040-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-040A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .040" bottom plate | 2 | |
| NDT1094-050 | Boeing Standard, 737/747 PT4 53-00-02 PG22, FIG2, .072" top plate .050" bottom plate | 2 | |
| NDT1094-050-A | REFERENCE STANDARD | 2 | |
| NDT1094-050/010-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-050A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .050" bottom plate | 2 | |
| NDT1094-070 | Boeing Standard, 737/747 PT4 53-00-02 PG22, FIG2, .072" top plate .070" bottom plate | 2 | |
| NDT1094-070-A | REFERENCE STANDARD | 2 | |
| NDT1094-070A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .070" bottom plate | 2 | |
| NDT1094-090 | Boeing Standard, 737/747 PT4 53-00-02 PG 22, FIG2, .072" top plate .090" bottom plate | 2 | |
| NDT1094-090-A | REFERENCE STANDARD | 2 | |
| NDT1094-090A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .090" bottom plate | 2 | |
| NDT1094-110 | Boeing Standard, 737/747 PT4 53-00-02 PG 22, FIG2, .072" top plate .110" bottom plate | 1 | |
| NDT1094-110-A | REFERENCE STANDARD | 2 | |
| NDT1094-110A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .110" bottom plate | 2 | |
| NDT1094-130 | Boeing Standard, 737/747 PT4 53-00-02 PG 22, FIG2, .072" top plate .130" bottom plate | 1 | |
| NDT1094-130-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-130A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .130" bottom plate | 2 | |
| NDT1094-155 | Boeing Standard, 737/747 PT4 53-00-02 PG22, FIG2, .072" top plate .155" bottom plate | 1 | |
| NDT1094-155-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-155A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .155" bottom plate | 2 | |
| NDT1094-185 | Boeing Standard, 737/747 PT4 53-00-02 PG22, FIG2, .072" top plate .185" bottom plate | 1 | |
| NDT1094-185-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-185A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .185" bottom plate | 2 | |
| NDT1094-215 | Boeing Standard, 737/747 PT4 53-00-02 PG22, FIG2, .072" top plate .215" bottom plate | 1 | |
| NDT1094-215-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-215A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .215" bottom plate | 2 | |
| NDT1094-245 | Boeing Standard, 737/747 PT4 53-00-02 PG22, FIG2, .072" top plate .245" bottom plate | 1 | |
| NDT1094-245-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-245A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .245" bottom plate | 2 | |
| NDT1094-250 | Boeing Standard, 737/747 PT4 53-00-02 PG22, FIG2, .072" top plate .250" bottom plate | 1 | |
| NDT1094-275 | Boeing Standard, 737/747 PT4 53-00-02 PG22, FIG2, .072" top plate .275" bottom plate | 1 | |
| NDT1094-275-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-275A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .275" bottom plate | 2 | |
| NDT1094-300 | Boeing Standard, 737/747 PT4 53-00-02 PG22, FIG2, .072" top plate .300" bottom plate | 1 | |
| NDT1094-300-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-300A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .300" bottom plate | 1 | |
| NDT1095 | Boeing Standard, 777 PT 6 53-00-10 Pg 8 Fig 1 | 2 | |
| NDT1096-040 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-040-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-050 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-050-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-070 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-070-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-090 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-090-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-110 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-110-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-130 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-130-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-155 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-155-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-185 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-185-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-215 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-215-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-245 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-245-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-275 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-275-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-300 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-300-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1097-A | Boeing Standard, .036 thick ±.000, .5 long x .018±.002 deep notch, 2024T3 CLAD, must have .004-.006 certify thickness | 2 | |
| NDT1097-B | Boeing Standard, .040 thick ±.001, .5 long x .018±.002 deep notch, 2024T3 CLAD, must have .004-.006 certify thickness | 2 | |
| NDT1097-C | Boeing Standard, .045 thick ±.002, .5 long x .018±.002 deep notch, 2024T3 CLAD, must have .004-.006 certify thickness | 2 | |
| NDT1097A | NDT1097A reference standard | 2 | |
| NDT1097B | NDT1097B Reference standard | 2 | |
| NDT1097C | NDT1097C Reference standard | 2 | |
| NDT1099 | Boeing Standard, .023 DEEP Pocket in .063 CLAD ALUMINUM, .014 notch, with 6 ea rubber feet. 757 PT6 53-30-14 | 4 | |
| NDT1099-.014-CLAD | Boeing Standard, .023 DEEP Pocket in .063 CLAD ALUMINUM, .014 notch | 1 | |
| NDT1099-063/050/025 | Boeing Standard | 1 | |
| NDT1099-071/040/020 | Boeing Standard | 1 | |
| NDT1099-072/036/014 | Boeing Standard, .036 DEEP Pocket in .072 CLAD ALUMINUM, .014 notch, with 6 ea rubber feet | 1 | |
| NDT1099-080/063/032 | Boeing Standard | 1 | |
| NDT1099-BBB | Boeing Standard | 1 | |
| NDT1099-E | Boeing Standard | 1 | |
| NDT1099.010-BARE | Boeing Standard, .031 DEEP Pocket in .063 ALUMINUM, .010 notch | 1 | |
| NDT1099.010-CLAD | Boeing Standard, .031 DEEP Pocket in .063 CLAD ALUMINUM, .010 notch | 1 | |
| NDT1099F-P1 | Boeing Standard | 1 | |
| NDT1099G-P1 | BEOING REFERENCE STANDARD 757 Part 4 53-30-04 Page 15-17 Figure 3. Material: Delrin. *** SEE FINALIZED DRAWING*** | 1 | |
| NDT1100-100 | Boeing Standard | 1 | |
| NDT1100-100-ABS | Boeing Standard | 1 | |
| NDT1100-200 | Boeing Standard | 1 | |
| NDT1100-200-ABS | Boeing Standard | 1 | |
| NDT1100-250 | REFERENCE STANDARD | 1 | |
| NDT1100-300 | Boeing Standard | 1 | |
| NDT1100-300-ABS | Boeing Standard | 1 | |
| NDT1100-400 | Boeing Standard | 1 | |
| NDT1100-400-ABS | Boeing Standard | 1 | |
| NDT1100-500 | Boeing Standard | 1 | |
| NDT1100-500-ABS | Boeing Standard | 1 | |
| NDT1100-600 | Boeing Standard | 1 | |
| NDT1100-600-ABS | Boeing Standard | 1 | |
| NDT1100-CFRP-100-ABS-100 | Boeing Standard | 1 | |
| NDT1100-CFRP-200-ABS-200 | Boeing Standard | 1 | |
| NDT1100-CFRP-300-ABS-300 | Boeing Standard | 1 | |
| NDT1100-CFRP-400-ABS-400 | Boeing Standard | 1 | |
| NDT1100-CFRP-500-ABS-500 | Boeing Standard | 1 | |
| NDT1100-CFRP-600-ABS-600 | Boeing Standard | 1 | |
| NDT1101-100-MB | Boeing Standard, .100 over .050, Magnetic Steel Bolts such as BACB30NE or BACB30NF or equiv | 1 | |
| NDT1101-100-MR | Boeing Standard, .100 over .050 | 1 | |
| NDT1101-100-NMR | Boeing Standard, .100 over .050 | 1 | |
| NDT1101-160-MB | Boeing Standard, .160 over .080, Magnetic Steel Bolts such as BACB30NE or BACB30NF or equiv | 1 | |
| NDT1101-160-MR | Boeing Standard, .160 over .080 | 1 | |
| NDT1101-160-NMR | Boeing Standard, .160 over .080 | 1 | |
| NDT1101-200-MB | Boeing Standard, .200 over .100, Magnetic Steel Bolts such as BACB30NE or BACB30NF or equiv | 1 | |
| NDT1101-200-MR | Boeing Standard, .200 over .100 | 1 | |
| NDT1101-200-NMR | Boeing Standard, .200 over .100 | 1 | |
| NDT1101-250-MB | Boeing Standard, .250 over .125, Magnetic Steel Bolts such as BACB30NE or BACB30NF or equiv | 1 | |
| NDT1101-250-MR | Boeing Standard, .250 over .125 | 1 | |
| NDT1101-250-NMR | Boeing Standard, .250 over .125 | 1 | |
| NDT1101-300-MB | Boeing Standard, .300 over .150, Magnetic Steel Bolts such as BACB30NE or BACB30NF or equiv | 1 | |
| NDT1101-300-MR | Boeing Standard, .300 over .150 | 1 | |
| NDT1101-300-NMR | Boeing Standard, .300 over .150 | 1 | |
| NDT1102-100 | Boeing Standard 787 PT6 51-00-11 PG 5-6 FG 1 | 1 | |
| NDT1102-200 | Boeing Standard 787 PT6 51-00-11 PG 5-6 FG 1 | 1 | |
| NDT1102-300 | Boeing Standard 787 PT6 51-00-11 PG 5-6 FG 1 | 1 | |
| NDT1102-400 | Boeing Standard 787 PT6 51-00-11 PG 5-6 FG 1 | 1 | |
| NDT1102-500 | Boeing Standard 787 PT6 51-00-11 PG 5-6 FG 1 | 1 | |
| NDT1102-600 | Boeing Standard 787 PT6 51-00-11 PG 5-6 FG 1 | 1 | |
| NDT1106 | Boeing Reference Standard composite..737 PT4 51-00-05 PG 5-6 FG 1 | 2 | |
| NDT1106-1 | Boeing Reference Standard composite..737 PT4 51-00-05 PG 5-6 FG 1 With top plate thickness of .060", .080" .100".. | 1 | |
| NDT112 | Boeing Standard, 707 PT6 57-10-07 FIG82: PG1424 SHEET5 | 1 | |
| NDT113 | Boeing Standard, 707 PT6 57-10-07 FIG78: PG1404 FIG78 SHEET6 | 1 | |
| NDT125 | Boeing Standard, 767 PT6 51-00-05 FIG2: PG5 | 1 | |
| NDT126 | Boeing Standard, 747 PT6 51-00-00 PG10: FIG23, DETAIL IV or CASA CN235 PT1 51-30-04:PG10 FG4 | 1 | |
| NDT127 | Casa Standard 51-30-06 PT1 page 5 | 1 | |
| NDT128 | Boeing Standard, 767 PT6 51-00-06 FIG1: PG4 *Customer needs to provide angle and material type | 1 | |
| NDT131 | Boeing Standard, 707 PT4 53-10-07 FIG2: PG9 SHEET5 | 1 | |
| NDT132 | Boeing Standard, 707 PT4 53-10-07 FIG3: PG19 SHEET8 | 1 | |
| NDT133 | Boeing Standard, 707 PT4 53-40-07:PG5 FIG1 SHEET5 | 1 | |
| NDT134 | Boeing Standard, 707 PT4 53-40-07:PG12 FIG2 SHEET6 | 1 | |
| NDT135 | Boeing Standard, 707 PT4 53-10-07 FIG4: PG23 SHEET4 | 1 | |
| NDT138 | Boeing Standard, 707 PT4 32-20-07, FIG2: PG9, Sheet7 | 1 | |
| NDT139 | Boeing Standard, 707 PT4 32-20-07, FIG2: PG11, Sheet9 | 1 | |
| NDT150 | Boeing Standard, 707 PT4 54-40-07 FIG1: PG5 SHEET5 | 1 | |
| NDT151 | Boeing Standard, 707 PT4 54-40-07 FIG1: PG5 SHEET5 | 1 | |
| NDT152 | Boeing Standard, 707 PT4 54-40-07 FIG1: PG5 SHEET5 | 1 | |
| NDT153 | Boeing Standard, 707 PT4 54-40-07 FIG1: PG5 SHEET5 | 1 | |
| NDT154 | Boeing Standard, 707 PT4 54-40-07 FIG1: PG5 SHEET5 | 1 | |
| NDT155 | Boeing Standard, 707 PT4 54-40-07 FIG1: PG5 SHEET5 | 1 | |
| NDT17031A | BOEING STANDARD , 777 PT4 57-20-14 PG 6 FG 2 | 1 | |
| NDT17031B | BOEING STANDARD , 777 PT4 57-20-13 PG 6 FG 2 | 1 | |
| NDT17031C | BOEING STANDARD , 777 PT4 57-20-15 PG 13 FG 2 | 1 | |
| NDT185 | Boeing Standard, 747 PT6 51-00-00:PG11 FIG13 DETAIL IV or CASA CN235 PT1 51-30-05 PG10 FG4 | 1 | |
| NDT186A | REFERENCE STANDARD | 1 | |
| NDT186B | REFERENCE STANDARD | 1 | |
| NDT186C | REFERENCE STANDARD | 1 | |
| NDT186D | REFERENCE STANDARD | 1 | |
| NDT186E | REFERENCE STANDARD | 1 | |
| NDT186F | REFERENCE STANDARD | 1 | |
| NDT187 | Calibration Standard, CASA CN-25130040E001, 51-30-04 PT 1, PG 11 | 1 | |
| NDT188 | Calibration Standard, CASA CN-25130040F001, 51-30-04, PT 1, PG 12 | 1 | |
| NDT188A | REFERENCE STANDARD | 1 | |
| NDT189 | Boeing Standard,737 PT6 51-00-00:PG13 FIG4 DETAIL VII | 1 | |
| NDT190 | Calibration Standard, CASA CN-25130050E001, 51-30-05, PT 1 PG 11 | 1 | |
| NDT191 | Calibration Standard, CASA CN-25130050F001, 51-30-05, PT 1 PG 12 | 1 | |
| NDT192 | Boeing Standard, 737 PT6 51-00-00:PG14 FIG13 DETAIL VII | 1 | |
| NDT194 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG3 Procedure 3, 5/32 and 3/16 holes | 1 | |
| NDT194A | BOEING STANDARD | 1 | |
| NDT194B | Boeing Standard, 737 PT6 53-30-00: PG 8-9 FIG 5 Procedure 3 | 2 | |
| NDT194C | BOEING REFERENCE STANDARD 737 Part 6 53-30-00 Page 10 Figure 6. MATERIAL: 2024-T3 OR T4 CLAD ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT200 | Boeing Standard. 727; PT6; 28-10-27; PG7; FIG1 | 1 | |
| NDT2009 | BOEING REFERENCE STANDARD 727 Part 4 57-10-27 Page 10 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT201 | Calibration Standard, CASA 55-15-00, CASA CN-25515000B001, PT 6, PG 4 | 1 | |
| NDT2015 | BOEING REFERENCE STANDARD 727 PT 4 54-30-27. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2016 | Boeing Standard, 727 PT6 54-40-27:PG16 FIG2 SHEET6 | 1 | |
| NDT2017 | Boeing Standard, 727 PT4 57-10-27:PG25 FIG3 SHEET7 | 1 | |
| NDT2019 | Boeing Standard, 727 PT6 57-40-27:PG22 FIG3 SHEET10 | 1 | |
| NDT202 | Calibration Standard, CASA CN-25233150B001 | 1 | |
| NDT2024 | Boeing Standard, 727 PT6 53-30-27:PG168 FIG22 SHEET6 | 1 | |
| NDT2025 | Boeing Standard, 727 PT6 53-30-27:PG168 FIG22 SHEET6 | 1 | |
| NDT2026 | Boeing Standard, 727 PT6 53-30-27:PG168 FIG22 SHEET6 | 1 | |
| NDT2027 | Boeing Standard, 727 PT6 53-30-27:PG168 FIG22 SHEET6 | 1 | |
| NDT2028 | Boeing Standard, 727 PT6 53-30-27:PG168 FIG22 SHEET6 | 1 | |
| NDT2029 | Boeing Standard, 727 PT6 53-30-27:PG168 FIG22 SHEET6 | 1 | |
| NDT203 | Calibration Standard, CASA CN- 25515200B000 | 1 | |
| NDT2031 | Boeing Standard | 1 | |
| NDT2032-A | BOEING STANDARD 727 PT6 57-10-28 PG 7 FG 2 | 1 | |
| NDT2032-BSIDE | Boeing Standard | 1 | |
| NDT2032-V3 | Boeing Standard | 1 | |
| NDT2033 | BOEING REFERENCE STANDARD, 727 PART 6 57-53-03 FIGURE 2 PAGE 6. MATERIAL:4340M OR 4330M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT204 | Calibration Standard, CASA CN-25337450B000, 53-37-45, PT 3, PG 5 | 1 | |
| NDT205 | Calibration Standard, CASA CN-25327150B001, 53-27-15, PT 3, PG 4 | 1 | |
| NDT206 | Boeing Standard, 727 PART6 57-10-27 PAGE 201, FIG 40 Sheet 5 | 1 | |
| NDT207 | Calibration Standard, CASA CN-25753100B000, 57-53-10, PT 4, PG 5 | 1 | |
| NDT208 | Boeing Standard, 727 PART6 57-10-27 PAGE 202, FIG 19 Sheet 6 | 1 | |
| NDT209 | Calibration Standard, CASA CN-25535000B001, 55-35-00, PT 6, PG 4 | 1 | |
| NDT210 | Calibration Standard, CASA CN-25515100B000 | 1 | |
| NDT211 | Calibration Standard, CASA CN-25327110B000, 53-27-11 PT 3, PG 4 | 1 | |
| NDT214 | Calibration Standard, CASA CN-25711040B000, 57-11-01, PT 4, PG 4 | 1 | |
| NDT2142 | REFERENCE STANDARD | 1 | |
| NDT215 | Calibration Standard, CASA CN-25315000B000, 53-15-00, PT 2, PG 4 | 1 | |
| NDT216 | Calibration Standard, CASA CN-25316000B000, 53-16-00 PT 2, PG 4 | 1 | |
| NDT217 | Calibration Standard, CASA CN-25337000B000, 53-37-00, PT 3, PG 4 | 1 | |
| NDT218 | Calibration Standard, CASA 57-24-00, PT 4, PG 4 | 1 | |
| NDT219 | Calibration Standard, CASA CN-235 PT4 57-11-06:PG4 FG2 | 1 | |
| NDT220 | Calibration Standard, CASA CN-27121120B000 | 1 | |
| NDT221 | Calibration Standard, CASA CN-27120000BA00 | 1 | |
| NDT240 | Boeing Standard 727 57-10-27 PT6 page 3 | 1 | |
| NDT248 | Boeing Standard, 727 PART4 53-10-27 | 1 | |
| NDT251 | Boeing Standard, 727 PT6 57-30-27:PG30 FIG3 SHEET6, engrave per drawing | 1 | |
| NDT253 | Boeing Standard, 727 PART4 53-10-27 | 1 | |
| NDT262 | Boeing Standard, 727 PART6 53-10-27, Drawing No. Fig 11 Sheet 8 | 1 | |
| NDT263 | Boeing Standard, 727 PART6 53-10-27, Drawing No. Fig6, Page 29 | 1 | |
| NDT272 | Boeing Standard..727 PART6 55-10-27 PAGE 13, FIG 2 Sheet 6 | 1 | |
| NDT280-A | REFERENCE STANDARD | 1 | |
| NDT280-B | REFERENCE STANDARD | 1 | |
| NDT280-C | REFERNCE STANDARD | 1 | |
| NDT280-D | REFERENCE STANDARD | 1 | |
| NDT280-E | REFERENCE STANDARD | 1 | |
| NDT280-F | REFERENCE STANDARD | 1 | |
| NDT291 | Boeing Standard 727 54-40-27 PART 6 page 6 | 1 | |
| NDT295 | Boeing Standard PT4 53-30-27 page 13 | 1 | |
| NDT296 | Reference Standard. 727 53-30-27 Pg 1 | 1 | |
| NDT297 | Boeing Standard, 727 PT4 32-30-27:PG38 FIG5 SHEET10 | 1 | |
| NDT298 | Boeing Standard, 727 PT4 32-30-27:PG39 FIG5 SHEET11 | 1 | |
| NDT3001 | Boeing Standard, 737 PT4 53-10-02:PG7 FIG2 | 2 | |
| NDT3004 | Boeing Standard, 737 PT6 53-30-10:PG9 FIG2 SHEET1 / 53-30-11:PG8 FIG2 SHEET1 | 3 | |
| NDT3005 | Reference Standard, 53-30-13, Part 6, Page 5, Figure 1 | 1 | |
| NDT3006 | REF. STANDARD | 1 | |
| NDT3008 | BOEING REFERENCE STANDARD 737 Part 6 54-40-01 Page 9 Figure 2. Material: 4330 or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3009 | BOEING REFERENCE STANDARD 737 Part 6 54-40-01 Page 9 Figure 2. Material: 4330 or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3010 | BOEING REFERENCE STANDARD 737 Part 6 54-40-01 Page 9 Figure 2. Material: 4330 or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3011 | BOEING REFERENCE STANDARD 737 Part 6 53-30-10 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3012 | BOEING REFERENCE STANDARD 737 Part 4 53-10-03 Page 8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3014-A | BOEING REFERENCE STANDARD 737 Part 4 27-00-01 Page 13 Figure 5. Material: 7075-T6 or T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3014-B | BOEING REFERENCE STANDARD 737 Part 4 27-00-01 Page 13 Figure 5. Material: 7075-T6 or T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3014A | Boeing Standard, 737 PT4 27-00-01:PG13 FIG5, Not Chrome Plated | 1 | |
| NDT3014B | Boeing Standard, 737 PT4 27-00-01:PG13 FIG5, Chrome Plated | 1 | |
| NDT3015 | Boeing Standard, 737 PT6 53-30-15:PG8 FIG2 | 2 | |
| NDT3016B | BOEING REFERENCE STANDARD 737 PT6 53-10-54 PG 7 FG 2 | 1 | |
| NDT3019 | Boeing standard 727 PT6 53-30-27 PG 115 FIG 17 | 2 | |
| NDT3019 R&D | Boeing Standard | 1 | |
| NDT3020P1 | Boeing Standard, 737 PT6 57-30-06:PG8 FIG4 | 2 | |
| NDT3021 | REFERENCE STANDARD B | 6 | |
| NDT3023 | Reference Standard | 4 | |
| NDT3024A | Boeing Standard, 737 PT4 53-10-04: PG8 FIG3 | 2 | |
| NDT3024H | REFERENCE STANDARD | 1 | |
| NDT3030 | BOEING REFERENCE STANDARD 737 PT 4 57-10-01 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3038 | Reference Standard, 737 PART4 57-50-02 | 4 | |
| NDT3038P1 | Reference Standard, 737 PART4 57-50-02 **SEE NEW DRAWING** (DM) | 3 | |
| NDT3039 | BOEING REFERENCE STANDARD 737 53-30-04 PT 4 FIG 2 SHEETS 1&2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3041 | Boeing Standard, 737 PT6 57-50-15:PG67 FIG2 | 1 | |
| NDT3043 | Boeing Standard, 737 PT4 57-50-03:PG13 FIG 2 | 1 | |
| NDT3044 | Boeing Standard, 737 PT4 57-50-03:PG14 FIG 3 | 1 | |
| NDT3045 | Boeing Standard, 737 PT6 57-50-18:PG6 FIG2 | 1 | |
| NDT3046 | Boeing Standard, 737 PT4 53-20-01:PG5 FIG1 | 1 | |
| NDT3047 | Boeing Standard, 737 PT6 53-10-62: PG6 FIG2 | 1 | |
| NDT3048 | Boeing Standard, 737 PT6 53-10-56: PG9 FIG3 | 1 | |
| NDT3048D | BOEING REFERENCE STANDARD 737 PART 6 53-10-56 FIGURE 4. | 1 | |
| NDT3049 | Boeing Standard, 737 PT6 53-10-67:PG21 FIG2 | 2 | |
| NDT3050 | Boeing Standard, 737 PT6 53-30-20: PG6 FIG2 | 4 | |
| NDT3052 | Boeing Standard, 737 PT6 57-10-25: PG9 FIG2 | 2 | |
| NDT3053 | Boeing Standard, 737 PT6 53-30-21: PG6 FIG2 | 1 | |
| NDT3054 | Boeing Standard, 737 PT4 57-10-04:PG12 FIG2 | 1 | |
| NDT3062 | Boeing Standard, 737 PT4 57-10-02: PG8 FIG2 | 1 | |
| NDT3065 | Boeing Standard, 737 PT6 53-30-22:PG6 FIG2, 747 PT6 53-30-18:PG6 FIG2 | 3 | |
| NDT3065-STL | Boeing Standard, 737 PT6 53-30-22:PG7 FIG3 301 1/2 Hard top sheet | 2 | |
| NDT3068 | REFERENCE STANDARD,5 | 5 | |
| NDT3070 | Boeing Standard 737 FIG 2 PG 19 57-10-06 | 1 | |
| NDT3071 | Boeing Standard, 737 PT6 53-10-65: PG11 FIG2 | 1 | |
| NDT3071A and NDT3071B | BOEING REFERENCE STANDARD 737 Part 6 53-10-65 Page 11 Figure 2. Material: 2024-T3 Bare or Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3073 | BOEING REFERENCE STANDARD 737 Part 6 57-10-31 Page 8 Figure 2. Material: 2024-T3 or T4. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3075 | BOEING REFERENCE STANDARD 727 Part 6 53-30-26 Page 7 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3077 | Boeing Standard, 737 PT6 53-10-69:PG15 FIG2 | 2 | |
| NDT3078 | Boeing Standard, 737 PT6 53-10-38:PG9 FIG4 | 1 | |
| NDT3080 | Boeing Standard, 737 PT4 55-30-02:PG8 FIG3 | 1 | |
| NDT3080-A | Boeing Reference Standard, .700 x .350 Thumbnail | 1 | |
| NDT3080-B | Boeing Reference Standard, .400 corner notch | 1 | |
| NDT3081 | Boeing Standard, 737 PT4 55-10-01:PG11 FIG4 | 1 | |
| NDT3082-1.44 | Boeing Standard, 737 PT6 53-10-70:PG6 FIG2 | 1 | |
| NDT3082A | Boeing Standard, 737 PT6 53-10-70:PG6 FIG2 | 2 | |
| NDT3082B | Boeing Standard, 737 PT6 53-10-70:PG6 FIG2 | 2 | |
| NDT3082C | Boeing Standard, 737 PT6 53-10-70:PG6 FIG2 | 2 | |
| NDT3083 | Boeing Standard, 737 PT4 55-10-03:PG14 FIG3 | 1 | |
| NDT3085A | Boeing Standard, 737 PT6 57-10-32: FIG3 PG10 | 1 | |
| NDT3085B | Boeing Standard, 737 PT6 57-10-32: FIG3 PG10 | 1 | |
| NDT3085C | Boeing Standard, 737 PT6 57-10-32: FIG3 PG10 | 1 | |
| NDT3086A | Boeing Standard, 737 PT6 57-10-32: FIG3 PG09 | 1 | |
| NDT3086B | Boeing Standard, 737 PT6 57-10-32: FIG3 PG09 | 1 | |
| NDT3086C | Boeing Standard, 737 PT6 57-10-32: FIG3 PG09 | 1 | |
| NDT3089 | Boeing Standard, 737 PT6 52-30-01:PG9 FIG3 | 1 | |
| NDT3090A | Boeing Reference Standard, 737 PT6 53-10-52:FIG2 PG5 | 1 | |
| NDT3090B | Boeing Reference Standard, 737 PT6 53-10-52:FIG3 PG6 | 1 | |
| NDT3090C | Boeing Reference Standard, 737 PT6 53-10-52:FIG3 PG6 | 1 | |
| NDT3091 | Boeing Standard, 747 PT6 53-30-20:PG6 FIG2 | 2 | |
| NDT3092 | Boeing Standard, 737 PT4 53-10-05:PG8 FIG2 | 2 | |
| NDT3093 R&D | Boeing Standard, 301 1/2H (.063) over 2024T3 Multistack | 1 | |
| NDT3094 | Boeing Standard 737 PT4 55-10-11 PG5 FG2 | 2 | |
| NDT3095 | Boeing Standard | 1 | |
| NDT3096 | Boeing Standard | 1 | |
| NDT3097 | Boeing Standard | 1 | |
| NDT3098 | Boeing Standard 737 PT4 55-10-07 PG7 FG2 | 1 | |
| NDT3099 | Boeing Standard,737 PT4 55-10-06 PG8 FG 2 | 2 | |
| NDT3100 | Boeing Standard 737 PT4 55-10-08 PG7 FG2 | 2 | |
| NDT3101 | Boeing Standard | 1 | |
| NDT3102 | Boeing Standard 737 PT4 55-10-10 PG7 FG2 | 1 | |
| NDT3104 | Boeing Standard 737 PT4 55-10-04 PG9 FG2 | 2 | |
| NDT3105 | Boeing Standard 737 PT4 55-10-15 PG7 FG2 | 1 | |
| NDT3106 | Boeing Standard 737 PT6 55-10-30 PG6 FG2 | 1 | |
| NDT3107 | Boeing Standard 737 PT4 55-10-09 PG7 FG2 | 1 | |
| NDT3109 | Boeing Standard 737 PT4 53-80-01 PG7 FG2 | 2 | |
| NDT3111 | Boeing Standard 737 PT4 55-10-05 PG9 FG2 | 1 | |
| NDT3112 | Boeing Standard | 2 | |
| NDT3113 | Boeing Reference Standard | 1 | |
| NDT3114 | Standard, Bonded Test Coupons, .032 thick coupons over .036 bottom plate | 1 | |
| NDT3114-1 | Standard, Sealant Thickness, .032 top sheet over .036 bottom sheet | 1 | |
| NDT3114-2 | Standard, Sealant Thickness, .032 top sheet over .036 bottom sheet | 1 | |
| NDT3115 | Standard, Bonded Test Coupons, .080 thick coupons over .080 bottom plate | 1 | |
| NDT3115-1 | Standard, Sealant Thickness, .080 top sheet over .080 bottom sheet | 1 | |
| NDT3115-2 | Standard, Sealant Thickness, .080 top sheet over .080 bottom sheet | 1 | |
| NDT3116 | Boeing Standard 737 PT4 53-10-06 PG10 FG2 | 2 | |
| NDT3117 | Boeing Standard 737 PT6 54-40-03 PG6 FG2 | 1 | |
| NDT3118 | Boeing Reference Standard, 737 PT6 52-30-01:FIG3 PG6, BACB30FN6-2 or -3 fasteners | 3 | |
| NDT3118/MF | Boeing Reference Standard, 737 PT6 52-30-01:FIG3 PG6, BACB30FN6-2 or -3 fastners | 1 | |
| NDT3119 R&D | Boeing Reference Standard | 1 | |
| NDT312 | Boeing Standard, 737 PT6; 53-10-17; PG6; FG2 | 1 | |
| NDT3120 | Boeing Standard | 1 | |
| NDT3121 | Boeing Standard | 1 | |
| NDT3122 | Boeing Standard | 2 | |
| NDT3123 | Boeing Standard | 2 | |
| NDT3124 | Boeing Standard | 2 | |
| NDT3125 | Boeing Standard | 2 | |
| NDT3126 | Boeing Standard | 2 | |
| NDT3126P | Boeing Standard | 1 | |
| NDT3127 | Boeing Standard | 2 | |
| NDT3129 | Boeing Standard | 1 | |
| NDT313 | Boeing Standard, 737 PT6; 53-10-17; PG7; FG3 | 1 | |
| NDT3130 | Boeing Standard 737 PT6 53-30-37 PG9 FG2 | 1 | |
| NDT3131 | Boeing Standard | 1 | |
| NDT3132 | Boeing Standard | 1 | |
| NDT3132B | BOEING REFERENCE STANDARD 737 Part 6 53-11-18 page 8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3133 | BOEING REFERENCE STANDARD 737 Part 6 53-11-16 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3134 | Boeing Reference Standard | 1 | |
| NDT3136 | Boeing Standard 737 PT4 55-10-14 PG7 FG2 | 1 | |
| NDT3137 | Boeing Standard | 2 | |
| NDT3139 | Boeing Standard 737 PT4 53-10-07 PG6 FG2 | 2 | |
| NDT3140 | Boeing Standard | 1 | |
| NDT3141 | Boeing Standard 737 PT4 55-10-13 PG 9 FG 2 | 2 | |
| NDT3142 | Boeing Standard 737 PT6 53-11-08 PG 6 FG 2 | 2 | |
| NDT3143 | Boeing Standard | 1 | |
| NDT3144 | Boeing Standard | 2 | |
| NDT3145 | Boeing Standard | 2 | |
| NDT3146 | Boeing Standard | 2 | |
| NDT3147 | Boeing Standard | 1 | |
| NDT3148 | Boeing Standard | 1 | |
| NDT3149 | Boeing Standard 737 PT6 53-30-419 PG6 FG2 | 2 | |
| NDT315 | Boeing Standard, 737 PT4 55-30-01:PG5 FIG2 | 1 | |
| NDT3150 | Boeing Standard 737 PT6 55-10-42 PG 7 FG 2 | 1 | |
| NDT3151 | Boeing Standard | 1 | |
| NDT3152- H | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT3152-A | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-B | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-C | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-D | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-E | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-F | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-G | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-H | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-I | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-J | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-K | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-X | REFERENCE STANDARD | 1 | |
| NDT3152A-K | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2, NDT3152A THRU K | 1 | |
| NDT3153 | REFERENCE STANDARD | 1 | |
| NDT3153-A | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-B | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-C | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-D | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-E | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-F | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-G | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-H | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-I | REFERENCE STANDARD | 1 | |
| NDT3153-J | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-X | REFERENCE STANDARD | 1 | |
| NDT3153A-J | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2, NDT3153A THRU J | 1 | |
| NDT3155 | Boeing Standard | 1 | |
| NDT3156 | Boeing Standard 737 PT6 57-10-60 PG 11 FG 2 | 4 | |
| NDT3157 | Boeing Standard 737 PT6 57-10-60 PG 11 FG 2 | 4 | |
| NDT3158 | REFERENCE STANDARD | 1 | |
| NDT3159 | Boeing Standard 737 PT6 57-10-60 PG 11 FG 2 | 4 | |
| NDT316 | Boeing Standard, 737 PT4 55-30-01:PG6 FIG2 | 1 | |
| NDT3160 | REFERENCE STANDARD | 1 | |
| NDT3161 | Boeing Standard 737 PT6 57-10-60 PG 11 FG 2 | 3 | |
| NDT3162 | Boeing Standard 737 PT6 57-10-60 PG 11 FG 2 | 4 | |
| NDT3163 | Boeing Standard 737 PT6 57-10-60 PG 11 FG 2 | 2 | |
| NDT3164 | Boeing Standard 737 PT6 57-10-60 PG 11 FG 2 | 3 | |
| NDT3166-001 | Boeing Standard | 1 | |
| NDT3166-002 | Boeing Standard | 1 | |
| NDT3166-003 | Boeing Standard 737 PT4 57-10-07 PG 8 FG 2 | 3 | |
| NDT3166-004 | Boeing Standard | 2 | |
| NDT3166-005 | Boeing Standard | 1 | |
| NDT3166-006 | Boeing Standard 737 PT4 57-10-14 PG 5 FG 2 | 4 | |
| NDT3166-007 | Boeing Standard 737 PT4 57-10-08 PG 6 FG 2 | 4 | |
| NDT3166-03 | REFERENCE STANDARD | 1 | |
| NDT3167-A | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-B | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-C | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-D | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-E | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-F | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-G | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-H | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-J | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-X | REFERENCE STANDARD | 1 | |
| NDT3167A-J | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2, NDT3167A THRU J | 1 | |
| NDT3168 | Boeing Standard, 737 PT6 57-10-53 PG 6 FG 2 | 3 | |
| NDT3169 | Boeing Standard 737 PT6 57-10-48 PG5 FG2 | 1 | |
| NDT317 | Boeing Standard, 737 PT6 53-10-16:PG5 FIG2 | 1 | |
| NDT3170 | Boeing Standard 737 PT4 57-10-06 PG 16 FG 2 | 5 | |
| NDT3171 | Boeing Standard 737 PT4 57-10-06 PG 17 FG 3 | 5 | |
| NDT3172 | Boeing Standard 737 PT4 57-10-05 PG 14 FG 2 | 3 | |
| NDT3176-A | Boeing Standard 737 PT6 57-10-59 PG 12 FG 2 | 3 | |
| NDT3176-B | Boeing Standard 737 PT6 57-10-59 PG 12 FG 2 | 3 | |
| NDT3176-C | Boeing Standard 737 PT6 57-10-59 PG 12 FG 2 | 3 | |
| NDT3176-D | Boeing Standard 737 PT6 57-10-59 PG 12 FG 2 | 3 | |
| NDT3176-X | REFERENCE STANDARD | 1 | |
| NDT3176A-D | BOEING REFERENCE STANDARD | 1 | |
| NDT3178-A | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2 | 2 | |
| NDT3178-B | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2 | 2 | |
| NDT3178-BOEING | REFERENCE STANDARD (NDT) | 1 | |
| NDT3178-C | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2 | 3 | |
| NDT3178-D | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2 | 3 | |
| NDT3178-E | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2 | 2 | |
| NDT3178-F | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2 | 2 | |
| NDT3178-G | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2 | 2 | |
| NDT3178-X | BOEING REFERENCE STANDARD 737 Part 6 57-10-62 Page 8 Figure 2. Material: 2024-T3. Test Report and Certificate of Conformance. | 1 | |
| NDT3178A | Boeing NG Ref Standard | 2 | |
| NDT3178A-G | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2, NDT3178A THRU G | 1 | |
| NDT3178B | Boeing NG Ref Standard | 2 | |
| NDT3178C | Boeing NG Ref Standard | 3 | |
| NDT3178D | Boeing NG Ref Standard | 3 | |
| NDT3178E | Boeing NG Ref Standard | 2 | |
| NDT3178F | Boeing NG Ref Standard | 2 | |
| NDT3178G | Boeing NG Ref Standard | 2 | |
| NDT3179 | Boeing Standard | 1 | |
| NDT3179-A | BOEING STANDARD 737 NDT Manual Part 6 Chapter 53-30-39 | 1 | |
| NDT3179-B | BOEING STANDARD 737 NDT Manual Part 6 Chapter 53-30-39 | 1 | |
| NDT3179-C | BOEING STANDARD 737 NDT Manual Part 6 Chapter 53-30-39 | 1 | |
| NDT3180-A | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3180-B | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3180-C | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3180-D | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3180-E | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3180-F | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3180-G | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3180-H | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3180-J | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3181-A | Boeing Standard | 1 | |
| NDT3181-B | Boeing Standard | 1 | |
| NDT3182-A | Boeing Standard | 1 | |
| NDT3182-B | Boeing Standard | 1 | |
| NDT3183 | Boeing Standard | 1 | |
| NDT3184 | Boeing Standard | 1 | |
| NDT3185-A | Boeing Standard | 1 | |
| NDT3185-B | Boeing Standard | 1 | |
| NDT3186 | Boeing Standard 737 PT4 57-10-17 PG 11 FG 2 | 3 | |
| NDT3187 | Boeing Standard 737 PT4 57-10-17 PG 12 FG 3 | 3 | |
| NDT3189 | BOEING REFERENCE STANDARD 737 Part 4 55-10-18 Page 6 Figure 2. Material: 7075-T6, 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3190-A | Boeing Standard 737 PT6 55-10-45 PG 6 FG 2 | 2 | |
| NDT3190-B | Boeing Standard 737 PT6 55-10-45 PG 6 FG 2 | 2 | |
| NDT3190-C | Boeing Standard 737 PT6 55-10-45 PG 6 FG 2 | 2 | |
| NDT3190-D | Boeing Standard 737 PT6 55-10-45 PG 6 FG 2 | 2 | |
| NDT3191 | Boeing Standard | 2 | |
| NDT3192 | Boeing Standard | 2 | |
| NDT3193 | Metal Reference standard | 1 | |
| NDT3194 | Boeing Metal reference Standard | 1 | |
| NDT3194-36/36 | BOEING REFERENCE STANDARD 737 PART 6 53-30-45 PAGE 7 FIGURE 1 TABLE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3194-40/40 | BOEING REFERENCE STANDARD 737 PART 6 53-30-45 PAGE 7 FIGURE 1 TABLE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3194-45/40 | BOEING REFERENCE STANDARD 737 PART 6 53-30-45 PAGE 7 FIGURE 1 TABLE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3194-50/40 | BOEING REFERENCE STANDARD 737 PART 6 53-30-45 PAGE 7 FIGURE 1 TABLE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3195 | Boeing Standard | 1 | |
| NDT3196 | Boeing Standard | 1 | |
| NDT3197 | Boeing Standard | 1 | |
| NDT3198 | Boeing Standard | 1 | |
| NDT3199 R&D | Boeing Standard | 1 | |
| NDT319X-A | Metal reference standard | 1 | |
| NDT319X-B | Metal reference standard | 1 | |
| NDT319X-C | Metal reference standard | 1 | |
| NDT319X-D | Metal reference standard | 1 | |
| NDT3202-A | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | 1 | |
| NDT3202-B | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | 1 | |
| NDT3202-C | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | 1 | |
| NDT3202-D | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | 1 | |
| NDT3202-E | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | 2 | |
| NDT3202-F | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | 1 | |
| NDT3202-G | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | 1 | |
| NDT3203 | Boeing Standard | 1 | |
| NDT3204 | Boeing Standard 737 PT4 53-10-08 PG 9 FG 2 | 2 | |
| NDT3205 | Boeing Standard | 1 | |
| NDT3206 | Boeing Standard | 1 | |
| NDT3207 | Boeing Standard 737 PT6 55-10-50 PG 5 FG 2 | 1 | |
| NDT3207A | BOEING REFERENCE STANDARD 737 Part 6 55-10-82 Paqe 5 Figure 2. Material: 7075-T6 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3208-A | BOEING STANDARD | 1 | |
| NDT3208-B | BOEING STANDARD | 1 | |
| NDT3208-C | Boeing Standard 737 PT6 55-10-55 PG6 FG3 | 1 | |
| NDT3209 | Boeing Standard | 1 | |
| NDT3209-A | BOEING REFERENCE STANDARD PART 6 55-10-62 PAGE 17 FIGURE 2. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3209-B | REFERENCE STANDARD | 1 | |
| NDT3209A | BOEING REFERENCE STANDARD 737 Part 6 55-10-74 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3210 | Boeing Standard 737 PT6 57-10-81 PG 8 FG 2 | 1 | |
| NDT3211 | Boeing Standard 737 PT6 57-10-81 PG 9 FG 3 | 1 | |
| NDT3212 | Boeing Standard 737 PT6 57-10-81 PG 10 FG 4 | 1 | |
| NDT3213 | BOEING STANDARD | 1 | |
| NDT3214 | BOEING STANDARD 737 PT4 53-10-09 PG6 FG2 | 1 | |
| NDT3215 | Boeing Standard | 1 | |
| NDT3216 | Boeing Standard | 1 | |
| NDT3217-A | Boeing Standard 737 PT6 57-10-79 PG6 FG2 | 1 | |
| NDT3217-B | Boeing Standard 737 PT6 57-10-79 PG6 FG2 | 1 | |
| NDT3218 | Boeing Standard 737 PT6 55-10-53 PG 10 FG 3 | 2 | |
| NDT3219 | BOEING REFERENCE STANDARD 737 PART 4 57-10-19 PAGE 11 FIGURE 2. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3220 | Boeing Standard 737 PT4 57-50-04 PG 6 FG 2 | 1 | |
| NDT3221 | Boeing Standard 737 PT4 55-10-19 PG 5 FG 2 | 2 | |
| NDT3223 | Boeing Standard 737 PT6 53-11-34 PG 6 FG 2 | 2 | |
| NDT3224 | BOEING REFERENCE STANDARD 737 Part 4 54-40-01 Page 7 Figure 3. Material: 15-5PH or 4330. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3225 | BOEING REFERENCE STANDARD 737 Part 6 54-40-20 Page 6 Figure 2. Material: 6AL-4V and 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3226 | BOEING REFERENCE STANDARD 53-11-39 PART 6. MATERIAL: 2024-T3 ALUMINUM. 2. Includes Test Report and Certificate of Conformance.BACR15FT6D RIVETS BUCKED BETWEEN .250"Ø and .280"Ø. | 2 | |
| NDT3226A | Boeing Standard, 737 PT6 53-11-39:PG5 Fig 2 | 2 | |
| NDT3227 | BOEING REFERENCE STANDARD 737 Part 4 54-40-09 Page 6 Figure 2. Material: 15-5 PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3228-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-87 Page 7 Figure 2. Material: 7150-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3228-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-87 Page 7 Figure 2. Material: 7150-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3228-C | BOEING REFERENCE STANDARD 737 Part 6 57-10-87 Page 7 Figure 2. Material: 7150-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3229 | Boeing Standard 737 PT6 53-30-50 PG 21 FG 2 | 2 | |
| NDT322A | Boeing Standard, 737 PT6 53-10-25:PG5 Fig 1 | 1 | |
| NDT3230 | Boeing Bonded Standard | 2 | |
| NDT3230-1 | REFERENCE STANDARD | 1 | |
| NDT3231 | Boeing Standard 737 PT4 53-10-10 PG10 FG2 | 2 | |
| NDT3232-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-86 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3232-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-86 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3232-C | BOEING REFERENCE STANDARD 737 Part 6 57-10-86 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3233 | Boeing Bonded Standard | 2 | |
| NDT3234 | BOEING REFERENCE STANDARD 737 Part 6 57-10-89 Page 7 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3235 | BOEING REFERENCE STANDARD 737 Part 4 -54-40-05 Page 5 Figure 2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3236 | BOEING REFERENCE STANDARD 737 Part 6 57-10-85 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3237-.040/.010 | Boeing Standard 737 PT4 53-30-12 PG 14-15 FG 7 | 1 | |
| NDT3237-.050/.015 | Boeing Standard 737 PT4 53-30-12 PG 14-15 FG 7 | 1 | |
| NDT3237-.130/.020 | Boeing Standard 737 PT4 53-30-12 PG 14-15 FG 7 | 1 | |
| NDT3237-0.040-0.010 | REFERENCE STANDARD | 1 | |
| NDT3237-0.040/0.010 | BOEING REFERENCE STANDARD 737 PT 4 53-30-12 FASTENER (BACR15GF5*). Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3237-0.050-0.015 | REFERENCE STANDARD BLOCO PADR?O | 1 | |
| NDT3237-0.050/0.015 | BOEING REFERENCE STANDARD 737 PT 4 53-30-12 FASTENER (BACR15GF5*). Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3237-0.130/0.020 | BOEING REFERENCE STANDARD 737 PT 4 53-30-12 FASTENER (BACR15GF5*). Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3237-050-015 | TOOL BOEING STANDARD | 1 | |
| NDT3237-130-020 | TOOL BOEING STANDARD | 1 | |
| NDT3237-P1 | Boeing Standard 737 PT4 53-30-12 PG 16 FG 8 | 2 | |
| NDT3238 | BOEING REFERENCE STANDARD 737 Part 4 55-10-23 Page 6 Figure 2. Material: 7050-T7 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3239 | BOEING REFERENCE STANDARD 737 Part 4 55-30-03 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3240 | BOEING REFERENCE STANDARD 737 Part 6 57-10-90 Page 6 Figure 3. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3242 | BOEING REFERENCE STANDARD 737 PT 4 54-40-03. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3243 | BOEING REFERENCE STANDARD 737 PT 4 54-40-04. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3244 | BOEING REFERENCE STANDARD 737 Part 6 53-11-42 Page 8 Figure 2. Material: 2024-T4 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3248 | BOEING REFERENCE STANDARD 737 Part 6 55-10-66 Page 5 Figure 2. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3249 | BOEING Reference Standard 551064 | 1 | |
| NDT3250 | BOEING Reference Standard 551064 | 1 | |
| NDT3251 | BOEING REFERENCE STANDARD 737 Part 6 52-30-02 page 5 Figure 2. Material: 7050-T7 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3252 | BOEING REFERENCE STANDARD 737 Part 4 52-10-03 Page 7 Figure 2. Material: 7050-T7 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3253 | BOEING REFERENCE STANDARD 737 Part 4 54-40-06 Page 7 Figure 2. Material: 15-5PH or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3254 | BOEING REFERENCE STANDARD 737 Part 4 54-40-06 Page 8 Figure 3. Material: 15-5PH or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3257 | BOEING REFERENCE STANDARD 737 Part 657-10-96 Page 7 Figure 2. Material: 7050-T7 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3258-B | BOEING REFERENCE STANDARD 737 Part 4 54-40-08 Page 6 Figure 2. Material: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3259 | BOEING REFERENCE STANDARD 737 Part 6 54-40-17 Page 8 Figure 2. Material: 6AL-4V, 15-5PH and 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT326 | Boeing Standard, 737 PT6 53-10-28:PG4 FIG1 | 1 | |
| NDT3260 | BOEING REFERENCE STANDARD 737 Part 6 54-40-17 Page 9 Figure 3. Material: 6AL-4V, 15-5PH and 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3261 | BOEING REFERENCE STANDARD 737 Part 6 57-50-31 Page 9 Figure 2. Material: 2024-T3 and 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3262 | BOEING REFERENCE STANDARD 737 Part 4 54-40-17 Page 6 Figure 2. Material: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3263 | BOEING REFERENCE STANDARD 737 Part 6 57-50-31 Page 10 Figure 3. Material: 2024-T3 and 7075-T7. Inlcudes | 1 | |
| NDT3264 | BOEING REFERENCE STANDARD 737 Part 4 55-10-22 page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3265 | BOEING REFERENCE STANDARD 737 Part 655-10-70 Page 8 Figure 2. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3266 | BOEING REFERENCE STANDARD 737 Part 6 -57-10-96 Page 8 Figure 3. Material: 7050-T7 or Eqivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3267-.040/.040 | Boeing Bonded Reference Standard 737 PT4 53-30-01 PG 6 FG 3, .040/.040. IncludesTest Report and Certificate of Conformance. | 2 | |
| NDT3267-.050/.040 | Boeing Bonded Reference Standard 737 PT4 53-30-01 PG 6 FG 3, .050/.040. IncludesTest Report and Certificate of Conformance. | 2 | |
| NDT3267-.063/.056 | Boeing Bonded Reference Standard 737 PT4 53-30-01 PG 6 FG 3, .063/.056. IncludesTest Report and Certificate of Conformance. | 2 | |
| NDT3267-.063/.063 | Boeing Bonded Reference Standard 737 PT4 53-30-01 PG 6 FG 3, .063/.063. IncludesTest Report and Certificate of Conformance. | 1 | |
| NDT3267-.080/.063 | Boeing Bonded Reference Standard | 2 | |
| NDT3267-.080/.100 | Boeing Bonded Reference Standard 737 PT4 53-30-01 PG 6 FG 3, .080/.100. IncludesTest Report and Certificate of Conformance. | 1 | |
| NDT3267-T1/T2 | BOEING REFERENCE STANDARD NDT3267-T1/T2 X 1SET OF 4 PIECES | 1 | |
| NDT3268 | BOEING REFERENCE STANDARD 737 Part 4 53-10-11 Page 4 Figure 2. Material: 7075-T6 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3269 | BOEING REFERENCE STANDARD, PT6, 54-40-19 PAGE 12 FIGURE 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3271 | BOEING REFERENCE STANDARD 737 PART 4 55-10-27 FIGURE 2 SHEET 1&2 PAGE 12. MATERIAL: 6AL-4v Includes Test Report and Certificate of Conformance. MATERIAL: 6AL-4v TITANIUM. | 1 | |
| NDT3272 | BOEING REFERENCE STANDARD 737 PART 4 55-10-27 FIGURE 3 PAGE 14. MATERIAL: 6AL-4v. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3272A | REF. STANDARD | 1 | |
| NDT3273A | BOEING REFERENCE STANDARD PART 6 55-10-84 PAGE 6 FIGURE 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3276 | BOEING REFERENCE STANDARD | 2 | |
| NDT3276A | REFERENCE STANDARD BOEING | 2 | |
| NDT3278-A | BOEING REFERENCE STANDARD 737 PART 6 53-30-50 FIGURE 3 PAGE 30. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3278-B | BOEING REFERENCE STANDARD 737 PART 6 53-30-50 FIGURE 3 PAGE 30. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3278-C | BOEING REFERENCE STANDARD 737 PART 6 53-30-50 FIGURE 3 PAGE 30. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3279 | REFERENCE STANDARD | 1 | |
| NDT3280 | REFERENCE STANDARD | 1 | |
| NDT3282 | BOEING REFERENCE STANDARD 737 PART 4 57-10-20 PAGE 7 FIGURE 2 . MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3285 | BOEING REFERENCE STANDARD 737 Part 6 53-30-63 Page 11 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3286 | BOEING REFERENCE STANDARD 787 Part 4 53-20-02 Page 7 Figure 2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3287 | BOEING REFERENCE STANDARD 787 Part 4 53-20-01 Page 7 Figure 2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3288 | BOEING REFERENCE STANDARD 787 Part 4 53-20-01 Page 7 Figure 2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3289 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3291 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3292 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3293 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3294 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3295 | BOEING REFERENCE STANDARD 737 Part 6 53-30-66 Page 6 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3296 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3297 | BOEING REFERENCE STANDARD 737 Part 6 53-30-64 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3298 | BOEING REFERENCE STANDARD 737 Part 6 53-30-66 Page 6 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3299 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT32XX-A | Boeing Standard | 1 | |
| NDT32XX-B | Boeing Standard top plate only | 1 | |
| NDT32XX-C | Boeing Standard | 1 | |
| NDT32XX-D | Boeing Standard | 1 | |
| NDT32XX-E | Boeing Standard | 1 | |
| NDT32XX-F | Boeing Standard | 1 | |
| NDT3300 | BOEING REFERENCE STANDARD 737 Part 6 5330-60 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3301A | REFERENCE STANDARD B737 NDTM P4 53-10-13 | 1 | |
| NDT3302 | REFERENCE STANDARD | 1 | |
| NDT3303 | BOEING REFERENCE STANDARD 737 PT 4 FIGURE 2. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3304 | BOEING 737 R&D REFERENCE STANDARD, 53-30-XX PART 6. MATERIAL: 2024-T3 CLAD, 1100 FOIL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3304-A | REFERENCE STANDARD | 2 | |
| NDT3305A | BOEING REFERENCE STANDARD PART 4 53-10-64 PG.18, FIG. 5. MATERIAL: 2024-T42 CLAD ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3305B | BOEING REFERENCE STANDARD PART 4 53-10-64 PG.18, FIG. 5. MATERIAL: 2024-T42 CLAD ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3307 | BOEING REFERENCE STANDARD 737 PART 6 57-11-05 PAGE 5 FIGURE 2 SHEET 1. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3308 | BOEING REFERENCE STANDARD 737 PART 6 57-11-05 PAGE 6 FIGURE 2 SHEET 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3308A | BOEING STANDARD, B737 PT6 57-11-05 PG 6 FG 2 | 2 | |
| NDT3310-A | REFERENCE STANDARD | 1 | |
| NDT3310-B | REFERENCE STANDARD | 1 | |
| NDT3310-C | REFERENCE STANDARD | 1 | |
| NDT3312 | BOEING REFERENCE STANDARD 737 PART 4 53-10-13 FIGURE 2 SHEET 1&2 | 2 | |
| NDT3316 | REFERENCE STANDARD | 2 | |
| NDT3317 | REFERENCE STANDARD | 1 | |
| NDT3318 | REFERENCE STANDARD | 1 | |
| NDT335 | Boeing Standard, 737 PT6 53-10-31:PG7 FIG3 | 1 | |
| NDT341 | Boeing Standard, 737 PT6 53-10-40 | 1 | |
| NDT345 | Boeing Standard, 737 PT6 57-40-01:PG4 FIG1 | 1 | |
| NDT348 | STANDARDS | 1 | |
| NDT349 | Boeing Standard, 737 PT4 32-10-01:PG5 FIG2 | 1 | |
| NDT350 | Boeing Standard, 737 PT4 32-20-01:PG4 FIG2 SHEET1 | 1 | |
| NDT353 | REF STANDARD | 1 | |
| NDT363 | Boeing Reference Standard 737 53-30-03 PT6 PG3 | 1 | |
| NDT365 | Boeing Standard, 737 PT4 71-20-01:PG4 FIG1 | 1 | |
| NDT367 | Boeing Standard, 737 PT6 71-20-01:PG12 FIG4 SHT1 | 1 | |
| NDT368 | Boeing Standard, 737 PT6 53-10-35:PG6 FIG1 | 1 | |
| NDT369 | Boeing Standard, 737 PT6 53-30-05: PG6 FIG2 SHEET4 | 1 | |
| NDT370 | Boeing Standard, 737 PT4 53-30-02:PG5 FIG1 | 1 | |
| NDT370-.036/.036 | BOEING STANDARD, 737 PT4 53-30-02:PG5 FIG1, .036 TOP AND BOTTOM SHEET | 1 | |
| NDT371 | Boeing Standard, 737 PT6 53-30-06:PG3 FIG1 | 1 | |
| NDT378 | Boeing Standard, 737 PT6 53-10-44:PG6 FIG2 | 1 | |
| NDT391 | BOEING REFERENCE STANDARD Part 6 53-10-51 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT392 | BOEING REFERENCE STANDARD 737 Part 4 53-30-03 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT394 | Boeing Standard, 737 PT6 54-30-01:PG4 FIG1 SHEET1 | 1 | |
| NDT396 | REFERENCE STANDARD B | 6 | |
| NDT396-32/40 | BOEING REFERENCE STANDARD 737 PT 6 53-30-44 FIGURE 2 PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT396-36/36 | Boeing Reference Standard, 737 PT6 53-30-44, PG7 FIG 2, .036" Upper skin, .036 Lower skin | 1 | |
| NDT396-40/40 | Boeing Reference Standard, 737 PT6 53-30-44, PG7 FIG 2, .040" Upper skin, .040 Lower skin | 1 | |
| NDT396-45/40 | Boeing Reference Standard, 737 PT6 53-30-44, PG7 FIG 2, .045" Upper skin, .040 Lower skin | 1 | |
| NDT396-50/40 | Boeing Reference Standard, 737 PT6 53-30-44, PG7 FIG 2, .050" Upper skin, .040 Lower skin | 1 | |
| NDT396-56/40 | Boeing Reference Standard, 737 PT6 53-30-44, PG7 FIG 2, .056" Upper skin, .040 Lower skin | 1 | |
| NDT396B | Boeing Reference Standard | 1 | |
| NDT396C | Boeing Reference Standard | 1 | |
| NDT398 | Reference Standard 737 | 2 | |
| NDT401 | Boeing Standard, 747 PT4 57-10-01: FIG1 PG4 | 1 | |
| NDT4018P | Boeing Standard, 747 PT4 54-40-02 | 1 | |
| NDT402 | Boeing Standard, 747 PT4 57-10-04: FIG1 PG5 | 1 | |
| NDT403 | Boeing Standard, 747 PT4 57-10-04: FIG2 PG6 | 1 | |
| NDT404 | Boeing Standard, 747 PT6 57-10-08:PG5 FIG2 | 1 | |
| NDT405 | Boeing Standard, 747 PT4 57-10-02: FIG2 PG5 | 1 | |
| NDT406 | Boeing Standard, 747 PT6 57-10-09:PG6 FIG2 | 1 | |
| NDT4064 | BOEING REFERENCE STANDARD 747 Part 6 53-30-06 Page 4 Figure 1. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT408 | Boeing Standard, 747 PT6 57-10-03: FIG2 PG5 | 1 | |
| NDT4099 | Boeing Standard, 747 PT4 54-40-11:PG5 FIG2 | 1 | |
| NDT410 | Boeing Standard, 747 PT4 57-10-05: FIG3 PG6 | 1 | |
| NDT4101 | Boeing Standard, 747 PT6 54-40-09:PG4 FIG1 | 1 | |
| NDT4106 | Boeing Standard, 747 PT4 54-30-05:PG9 FIG2 | 1 | |
| NDT4107 | Boeing Standard, 747 PT4 54-30-06:PG11 FIG2 | 1 | |
| NDT4108 | Boeing Standard, 747 PT4 54-30-06:PG12 FIG3 | 1 | |
| NDT4109 | Boeing Standard, 747 PT4 54-30-08:PG10 FIG2 | 1 | |
| NDT411 | Boeing Standard, 747 PT6 55-10-04: FIG1 PG4 | 1 | |
| NDT4115 | Boeing Standard, 747 PT4 54-30-07:PG10 FIG2 | 1 | |
| NDT4116 | Boeing Standard, 747 PT4 54-40-02:PG20 FIG7 | 1 | |
| NDT4118 | Boeing Standard, 747 PT4 54-40-02:PG22 FIG9 | 1 | |
| NDT412 | Boeing Standard, 747 PT6 55-10-01: FIG1 PG3 | 1 | |
| NDT4120G1 | Boeing Standard, 747 PT4 54-30-10 | 1 | |
| NDT4123 | Boeing Standard, 747 PT4 54-30-10:PG13 FIG3 | 1 | |
| NDT4123P | Boeing Standard, 747 PT4 54-30-10 | 1 | |
| NDT4131 | Boeing Standard, 747 PT4 54-40-11:PG21 FIG5 | 1 | |
| NDT4133 | Boeing Standard, 747 PT4 54-40-11:PG23 FIG7 | 1 | |
| NDT4150 | Composite/Bonded Standard, Boeing 747 PT4 57-22-01 | 1 | |
| NDT4151 | BOEING 747 REFERENCE STANDARD PART 4 57-10-17 FIGURE 3 PAGE 10. 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4152 | BOEING 747 REFERENCE STANDARD PART 4 53-10-07 PAGE 6 FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4153 | BOEING 747 REFERENCE STANDARD PART 4 57-30-08 PAGE 6 FIGURE 2. PROCEDURE FOR INSPECTING CRACKED RIVET PART NUMBER BACR15FH10DD17 | 1 | |
| NDT4154 | BOEING REFERENCE STANDARD 747 PT 4 54-40-14 FIGURE 5 PAGE 19. Includes Test Report and Certificate of Conformance | 1 | |
| NDT4155 | BOEING REFERENCE STANDARD 747 PT 4 54-40-14 FIGURE 6 PAGE 20. Includes Test Report and Certificate of Conformance | 1 | |
| NDT4156 | BOEING REFERENCE STANDARD 747 PT 4 54-40-14 FIGURE 7 PAGE 21. Includes Test Report and Certificate of Conformance | 1 | |
| NDT4157 | BOEING REFERENCE STANDARD 747 PT 4 54-40-14 PAGE 22 FIGURE 8. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4170 | BOEING REFERENCE STANDARD 747 Part 4 53-30-02 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4173 | Boeing Standard, 747 PT6 53-30-11:PG6 FIG3 | 1 | |
| NDT4175 | Boeing Standard, 747 PT4 53-10-41:PG12 FIG2 | 1 | |
| NDT4176 | Boeing Standard, 747 PT4 53-10-41:PG13 FIG3 | 1 | |
| NDT4178 | Boeing Standard, 747 PT4 53-40-05:PG 4 FIG 2 | 1 | |
| NDT4180 | Boeing Reference Standard, 747 57-10-37 part 6, page 8 | 1 | |
| NDT4183 | Boeing Bonded Reference Standard, PT4, 53-30-03, PG11, FIG2 | 1 | |
| NDT4187 | BOEING 747 REFERENCE STANDARD PART 4 57-10-18 FIGURE 2 PAGE 8. 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4190 | Boeing Standard w/ certs | 1 | |
| NDT4190A | Boeing Standard w/ certs | 1 | |
| NDT4191 | Reference Standard, 747 PT4 54-40-21:PG16 FIG3 | 1 | |
| NDT4191G | Reference Standard, 747 PT4 54-40-21 | 1 | |
| NDT4191P | Reference Standard, 747 PT4 54-40-21 | 1 | |
| NDT4191P1L | Reference Standard, 747 PT4 54-40-21 | 1 | |
| NDT4191P1R | Reference Standard, 747 PT4 54-40-21 | 1 | |
| NDT4191P2L | Reference Standard, 747 PT4 54-40-21 | 1 | |
| NDT4191P2R | Reference Standard, 747 PT4 54-40-21 | 1 | |
| NDT4192 | Reference Standard, 747 PT4 54-40-21:PG16 FIG3 | 1 | |
| NDT4205 | Reference Standard, 747 PT4 57-40-07:PG6 FIG2 | 1 | |
| NDT4206 | Reference Standard, 747 PT4 54-40-22:PG5 FIG2 | 1 | |
| NDT4208 | Reference Standard, 747 PT4 54-40-23:PG10 FIG2 | 2 | |
| NDT4209 | Boeing Standard, 747 PT4 53-10-08:PG12 FIG2 | 1 | |
| NDT4211 | Boeing Standard, 747 PT4 53-10-08:PG12 FIG2 | 1 | |
| NDT4212 | Boeing Standard 747 53-10-09 PT4 PG4 | 1 | |
| NDT4214 | Boeing Standard 747 53-30-08 PT6 PG8 | 1 | |
| NDT4217 | Boeing Reference Standard, 747 PT6 53-30-14:PG6 FIG1 | 1 | |
| NDT4218A | BOEING METAL REFERENCE STANDARD | 1 | |
| NDT4219 | Boeing Standard, 747 PT4 53-10-11:PG6 FIG4 | 1 | |
| NDT4220 | Boeing Standard, 747 PT6 53-30-13:PG9 FIG2 | 1 | |
| NDT4221 | Boeing Standard 747 53-30-12 PT6 PG 5 | 1 | |
| NDT4224 | Boeing Standard 747 54-40-24 PT4 PG7 | 1 | |
| NDT4225 | BOEING 747 REFERENCE STANDARD PART 6 53-10-47 PAGE 7 FIGURE 2. MATERIAL: 7075-T6 or 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4226 | Boeing Standard, 747 PT4 57-10-22:PG7 FIG2 | 1 | |
| NDT4228 | BOEING 747 REFERENCE STANDARD PART 6 54-40-16 PAGE 11 FIGURE 2. MATERIAL: 15-5PH, 17-4 PH or 4130 STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4229 | BOEING REFERENCE STANDARD PT 6 54-40-16 FIG 3, PAGE 12. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT423 | Boeing Standard, 747 PT6 57-10-17:PG8 FIG2 | 1 | |
| NDT4230 | Boeing Standard, 747 PT4 53-10-10:PG6 FIG2 | 2 | |
| NDT4230SPL | Boeing Standard, 747 PT4 53-10-10:PG6 FIG2 (.100" Long notches) | 1 | |
| NDT4231 | BOEING 747 REFERENCE STANDARD PART 4 57-10-18 FIGURE 2 PAGE 8. 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4232 | Boeing Standard, 747 PT4 55-10-03 :PG6 FIG2 | 1 | |
| NDT4233 | Boeing Standard, 747 PT4 55-10-03: PG7 FIG3 | 1 | |
| NDT4234 | Boeing Standard, 747 PT4 55-10-03: PG8 FIG4, with cert | 1 | |
| NDT4235 | Boeing Standard, 747 PT4 55-10-03: PG9 FIG5, with cert | 1 | |
| NDT4236 | Boeing Standard, 747 PT6 53-30-16: PG6 FIG1 SHEET1 | 1 | |
| NDT4237 | Boeing Standard, 747 PT6 53-30-16: PG6 FIG1 SHEET1 | 1 | |
| NDT4238 | Boeing Standard, 747 PT6 53-30-16: PG6 FIG1 SHEET1 | 1 | |
| NDT4239 | Boeing Standard, 747 PT6 53-30-16: PG6 FIG1 SHEET1 | 1 | |
| NDT424 | Boeing Standard, 747 PT6 57-10-17:PG9 FIG3 | 1 | |
| NDT4240 | Boeing Standard, 747 PT4 27-20-01 PG8 FIG3 | 1 | |
| NDT4243 | Boeing Standard, 747 PT6 57-10-31:PG5 FIG1 | 1 | |
| NDT4244 | Boeing Standard, 747 PT4 53-10-12: PG6 FIG2 | 3 | |
| NDT4246 | Boeing Standard 747 53-10-34 PT6 PG 5 | 1 | |
| NDT4247 | Boeing Standard | 2 | |
| NDT4248 | Reference Standard, 747 PT4 53-10-13:PG5 FIG2 | 1 | |
| NDT4249 | Boeing Standard, 747 PT6 53-30-19:PG3 FIG1 | 1 | |
| NDT4250 | Boeing Standard 747 PT4 57-30-10 PG 6 FG 2 | 1 | |
| NDT4251 | Boeing Standard 747 PT4 57-30-11 PG 11 FG 2 | 1 | |
| NDT4251A | Boeing Standard | 1 | |
| NDT4251B | Boeing Standard | 1 | |
| NDT4251C | Boeing Standard | 1 | |
| NDT4252 | Boeing Standard 747 PT4 57-10-23 PG 6 FG 2 | 1 | |
| NDT4253 | Boeing Standard | 1 | |
| NDT4254 | BOEING STANDARD 747 PT4 57-10-24 FIG 2 | 1 | |
| NDT426 | Boeing Standard, 747 PT6 55-10-01: FIG1 PG4 | 1 | |
| NDT4263 | BOEING STANDARD 747 FG2 | 2 | |
| NDT4264 | BOEING STANDARD 747 FG3 | 2 | |
| NDT4266 | BOEING REFERENCE STANDARD 747 PT 4 57-30-12 PAGE 8 FIGURE 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4267 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 10 FIGURE 2. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4268 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 11 FIGURE 3. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4269 | BOEING REFERENCE STANDARD 747 part 4 57-40-08 page 12 Figure 4. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4270 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 13 FIGURE 5. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4271 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 14 FIGURE 6. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4272 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 15 FIGURE 7. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4273 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 16 FIGURE 8. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4274 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 17 FIGURE 9. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4275 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4276 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4277 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4278 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4279 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4280 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4281 | BOEING REFERENCE STANDARD 747 PT 4 57-10-26 PAGE 5 FIGURE 2. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT431 | Boeing Standard 747-53-10-19 PT 6 PG 4 | 1 | |
| NDT432 | Boeing Standard, 747 PT6 57-30-02:PG4 FIG1 | 1 | |
| NDT435 | Boeing Standard, 747 PT6 57-10-20:PG7 FIG3 | 1 | |
| NDT436 | Boeing Standard, 747 PT6 57-10-20:PG8 FIG4 | 1 | |
| NDT437 | Boeing Standard, 747 PT4, 53-10-01, PG5, FIG2 | 1 | |
| NDT438 | Boeing Standard, 747 PT4, 53-10-01, PG5, FIG2 | 1 | |
| NDT439 | Boeing Standard, 747 PT6 57-10-22:PG5 FIG2 | 1 | |
| NDT440 | Boeing Standard, 747 PT4 57-10-11: FIG2 PG5 | 1 | |
| NDT441 | Boeing Standard, 747 PT4 57-10-11: FIG2 PG5 | 1 | |
| NDT442 | Boeing Standard 747-53-10-02 PT 4 PG 4 | 1 | |
| NDT443 | Boeing Standard 747-53-10-02 PT 4 PG 4 | 1 | |
| NDT446 | Boeing Standard, 747 PT4 57-10-13: FIG2 PG5 | 1 | |
| NDT447 | Boeing Standard, 747 PT4 57-10-13: FIG2 PG5 | 1 | |
| NDT448 | Boeing Standard, 747 PT4 57-10-13: FIG2 PG5 | 1 | |
| NDT449 | Boeing Standard, 747 PT4 57-10-13: FIG2 PG5 | 1 | |
| NDT455 | Boeing Standard 747-53-40-01 PT 4 PG 6 | 1 | |
| NDT456 | Boeing Standard 747-53-40-01PT 4 PG 7 | 1 | |
| NDT460 | Boeing Standard, 747 PT6 57-10-28:PG3 FIG1 | 1 | |
| NDT471 | Boeing Standard, 747 PT4 57-30-02: FIG1 PG4 | 1 | |
| NDT474 | Boeing Standard 747 PT6 53-10-20 FG 1 PG5 | 1 | |
| NDT475 | Boeing Standard, 747 PT6 57-10-27:PG4 FIG1 | 1 | |
| NDT476 | Boeing Standard 747-53-10-18 PT 6 PG 5 | 1 | |
| NDT478 | Boeing Standard 747-53-10-18 PT 6 PG 5 | 1 | |
| NDT479 | Boeing Standard 747 PT6 53-10-22 FG 2 PG 5 | 1 | |
| NDT480 | Boeing Standard 747 PT6 53-10-22 FG 3 PG 6 | 1 | |
| NDT481 | Boeing Standard 747 PT6 53-10-22 FG 4 PG 7 | 1 | |
| NDT482 | Boeing Standard, 747 PT6 55-10-08: PG7 FIG3, with cert | 1 | |
| NDT483 | Boeing Standard, 747 PT6 55-10-08: PG7 FIG3, with cert | 1 | |
| NDT484 | Boeing Standard 747 PT6 53-10-25 FG 1 PG3 | 1 | |
| NDT490 | Boeing Standard 747 57-30-06 Part 4 page 5 fig 2 | 1 | |
| NDT491 | Boeing Standard 747 PT6 53-10-16 FG 1 PG 5 | 1 | |
| NDT497 | Boeing Standard, 767 PT6 53-00-05:PG2 FIG1 | 1 | |
| NDT504A | Boeing 757 Reference Standard, Part 6, 54-40-01; Figure 3, Page 14 | 1 | |
| NDT504B | Boeing 757 Reference Standard, Part 6, 54-40-01; Figure 3, Page 14 | 1 | |
| NDT504C | Boeing 757 Reference Standard, Part 6, 54-40-01; Figure 3, Page 14 | 1 | |
| NDT504D | Boeing 757 Reference Standard, Part 6, 54-40-01; Figure 3, Page 14 | 1 | |
| NDT504E | Boeing 757 Reference Standard, Part 6, 54-40-01; Figure 3, Page 14 | 1 | |
| NDT506 | Alum to alum core shim damage defect standard | 1 | |
| NDT5089 | REFERENCE STANDARD FOR UT INSPECTION | 1 | |
| NDT5097-A | BOEING REFERENCE STANDARD 757 PT 4 57-20-03 FIG 2 PG 6. Material 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT5097-B | BOEING REFERENCE STANDARD 757 PT 4 57-20-03 FIG 2 PG 6. Material 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT5097-C | BOEING REFERENCE STANDARD 757 PT 4 57-20-03 FIG 2 PG 6. Material 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT5097-D | BOEING REFERENCE STANDARD 757 PT 4 57-20-03 FIG 2 PG 6. Material 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT511 | Boeing Standard, 757 PT6 57-10-02: PG7 FIG2 | 1 | |
| NDT512 | Boeing Standard, 757 PT4 57-10-01:PG6 FIG3 | 1 | |
| NDT514 | Boeing Standard, 757 PT6 57-20-01:PAGE8 FIG2 SHEET1&2 | 1 | |
| NDT515 | Boeing Standard, 757 PT4 57-21-01:PAGE6 FIG3 | 2 | |
| NDT516 | Boeing Standard, 757 PT6 57-23-01:PAGE3 FIG1 | 1 | |
| NDT518 | Ultrasonic Inspection Reference standard 757 | 1 | |
| NDT519 | Boeing Standard, 757 PT6 52-30-01:PG8 FIG4 | 1 | |
| NDT520 | Eddy Current Inspection Reference standard 757 | 1 | |
| NDT521 | Boeing Standard, 757 PT4 55-10-02:PG8 FIG4 | 1 | |
| NDT522 | Boeing Standard, 757 PT4 53-80-01: PG8 FIG4 | 1 | |
| NDT522P1 | Boeing Standard, 757 PT4 53-80-01: PG9 FIG5 | 1 | |
| NDT523 | Boeing Standard, 757 PT6 53-60-04:PG7 FIG3 | 1 | |
| NDT524 | Boeing Standard, 757 PT6 53-10-06:PG5 FIG2 | 1 | |
| NDT525 | Boeing Standard, 757 PT4 54-50-01:PG7 FIG3 | 1 | |
| NDT527 | Boeing Standard, 757 PT6 53-30-06 | 1 | |
| NDT528 | Boeing Standard, 757 PT4 55-10-04: PG10 FIG2 | 1 | |
| NDT530 | Boeing Standard, 757 PT6 53-10-04: PG7 FIG3 | 1 | |
| NDT531 | Boeing Standard, 757 PT6 53-30-07: PG5 FIG2 | 1 | |
| NDT532 | Boeing Standard, 757 PT4 55-10-05: PG6 FIG2 | 1 | |
| NDT533 | Boeing Standard, 757 PT4 55-10-03 | 1 | |
| NDT535 | BOEING STANDARD | 1 | |
| NDT536 | Boeing Standard, 757 PT4 53-40-01: PG5 FIG2 | 1 | |
| NDT537 | Boeing Standard, 757 PT4 57-10-02:PAGE8 FIG3 | 2 | |
| NDT538 | Boeing Standard | 1 | |
| NDT539 | Boeing Standard 757 PT6 55-10-02 PG5 FG2 | 1 | |
| NDT542 | Boeing Standard 757 Part 4 55-10-07 page 11 figure 3 | 1 | |
| NDT543 | Boeing Standard, 757 PT6 53-40-01:PG | 1 | |
| NDT546 | Boeing Standard, 757 PT4 57-20-02:PG7 FIG2 | 1 | |
| NDT549 | Boeing Standard, 757 PT6 57-20-02:PAGE8 FIG2 | 1 | |
| NDT552 | Boeing Standard, 757 PT4 57-20-01:PG7 FIG2 | 2 | |
| NDT553 | Boeing Standard, 757 PT6 52-30-02:PG6 FIG2 | 1 | |
| NDT554 | Boeing Standard, 757 PT6 53-10-07: PG5 FIG2 | 1 | |
| NDT555 | Boeing Standard, 757 PT6 53-10-19: PG8 FIG2 | 1 | |
| NDT558 | Boeing Standard, 737 PT6 53-30-40 PG 9 FG 1 | 1 | |
| NDT559 | Boeing Standard, 757 PT6 57-51-01:PG6 FIG2 | 1 | |
| NDT560 | REFERENCE STANDARD | 1 | |
| NDT561 | REFERENCE STANDARD | 1 | |
| NDT562 | Boeing Reference Standard, 757 PT4 57-25-01:PG11 FIG2 | 1 | |
| NDT563 | Boeing Standard, 757 PT6 57-51-04:PG8 FIG2 | 2 | |
| NDT563 R&D | NDT563 R&D Standard w/ certs | 1 | |
| NDT564A | Boeing Standard 737 PT4 57-50-01 PG4 FG2 | 2 | |
| NDT564B | Boeing Standard 737 PT4 57-50-01 PG4 FG2 | 2 | |
| NDT566 | Boeing Standard, 757 | 1 | |
| NDT567 | Boeing Standard, 757 PT4 54-50-02 PG 8 FG 3 | 1 | |
| NDT567-G1 | Positioner, used with Boeing Standard NDT567, .645" Dimension 767 PT4 54-50-02 PG 9 FG 4 | 1 | |
| NDT567-G2 | Positioner, used with Boeing Standard NDT567, .680" Dimension 767 PT4 54-50-02 PG 9 FG 4 | 1 | |
| NDT568 | Boeing Standard, 757 | 2 | |
| NDT568 VER6 | Boeing Standard, 757, fasteners will be supplied by customer | 1 | |
| NDT569 | Boeing Standard 757 PT6 53-40-07 PG 7 FG 2 | 1 | |
| NDT570 | Boeing Standard, VER 2 | 1 | |
| NDT571 | Boeing Standard | 1 | |
| NDT572-6 R&D | Boeing Standard, #6 dia fasteners | 1 | |
| NDT572-8 R&D | Boeing Standard, #8 dia fasteners | 1 | |
| NDT573 | Boeing Standard | 1 | |
| NDT574 | Boeing Standard, 5 Notches | 1 | |
| NDT575 | Boeing Standard 757 PT6 53-60-12 PG 8 FG 2 | 1 | |
| NDT576 | Boeing Reference Standard, 757 | 1 | |
| NDT577 | Boeing Standard, 757 PT6 53-10-12:PG7 FIG3 | 1 | |
| NDT578 | Boeing Standard 757 PT6 55-10-04 PG 10 FG 2 | 1 | |
| NDT579 | Boeing Standard | 1 | |
| NDT580 | Boeing Standard | 1 | |
| NDT581 | Boeing Standard | 1 | |
| NDT582 | Boeing Standard | 2 | |
| NDT583 | Boeing Reference Standard | 1 | |
| NDT584 | Boeing Standard | 1 | |
| NDT595 | Boeing Standard 757 PT4 53-80-02 PG 7 FG 2 | 1 | |
| NDT596 | Boeing Standard 757 PT4 52-30-01 PG 6 FG 2 | 2 | |
| NDT6000-EC | Boeing Standard 767 PT 4 57-50-02 PG10 FIG 4 | 2 | |
| NDT6000A | Boeing Standard, 767 PT4 57-50-02..Was NDT700A | 2 | |
| NDT6000B | Boeing Standard, 767 PT4 57-50-02..Was NDT700B | 2 | |
| NDT6000C | Boeing Standard, 767 PT4 57-50-02..Was NDT700C | 2 | |
| NDT6000D | Boeing Standard, 767 PT4 57-50-02..Was NDT700D | 2 | |
| NDT6000E | Boeing Standard, 767 PT4 57-50-02..Was NDT700E | 2 | |
| NDT6000X | NDT STANDARD | 1 | |
| NDT6001 | Boeing Standard 767 PT4 57-50-23 PG7 FG2 *for TEK-5023 | 2 | |
| NDT6002 | Boeing Standard 767 PT4 57-50-24 PG7 FG2 *for TEK-5024 | 2 | |
| NDT6004 | Boeing Standard 767 PT4 57-50-09 PG 11 FG 2 | 2 | |
| NDT6005 | Boeing Standard 767 PT4 57-50-09 PG 12 FG 3 | 2 | |
| NDT6006 | Boeing Standard 767 PT4 57-50-09 PG 13 FG 4 | 2 | |
| NDT6007 | Boeing Titanium Reference Standard w/certs 767 PT4 57-50-11 PG 7 FG 2 | 2 | |
| NDT6008 | Boeing Titanium Reference Standard w/certs 767 PT4 57-50-11 PG 8 FG 3 | 2 | |
| NDT6009 | Boeing Reference Standard, 767 PT4 52-30-03:PG5 FIG2 | 2 | |
| NDT6010 | Boeing Reference Standard, 767 PT4 52-30-02:PG5 FIG2 | 1 | |
| NDT6011 | Boeing Standard 767 PT4 57-50-20 PG 6 FG 2 | 2 | |
| NDT6012 | Boeing Standard, 767 PT4 57-50-26 PG 7 FG 2 | 1 | |
| NDT6013 | Boeing Standard, 767 PT4 57-50-26 PG 8 FG 3 | 1 | |
| NDT6014 | Boeing Standard 767 57-50-16 PT4 | 2 | |
| NDT6015 | Boeing Standard 767 57-50-16 PT4 PG6 | 2 | |
| NDT6016 | Boeing Reference Standard, 767 PT4 53-10-03:PG4 FIG2 | 2 | |
| NDT6017 | Boeing Titanium Reference Standard w/certs 767 PT4 57-50-22 PG 6-7 FG 2 | 2 | |
| NDT6018 | Boeing Titanium Reference Standard w/certs 767 PT4 57-50-22 PG 8-9 FG 3 | 2 | |
| NDT6019 | Boeing Reference Standard 767 52-32-06 Fig. 2 | 2 | |
| NDT602 | Calibration Reference Standard | 1 | |
| NDT602-.050 | Calibration Standard, 0.050INCH | 1 | |
| NDT602-.074 | Calibration Standard, .074INCH | 1 | |
| NDT602-.100 | Calibration Standard, 0.100 | 1 | |
| NDT602-.125 | Calibration Standard, 0.125 | 1 | |
| NDT602-.130 | Calibration Standard, 0.130 | 1 | |
| NDT602-.150 | Calibration Standard, 0.150INCH | 1 | |
| NDT602-.180 | Calibration Standard, 0.180INCH | 1 | |
| NDT602-.225 | Calibration Standard, 0.225INCH | 1 | |
| NDT6020 | Boeing Standard 767 PT4 57-50-14 PG 11 FG 4 | 2 | |
| NDT6021 | Boeing Standard 767 PT4 57-50-14 PG 12 FG 5 | 2 | |
| NDT6022 | Boeing Standard 767 57-50-15 PT4 PG 5 FG2 | 2 | |
| NDT6023 | Boeing Standard 767 57-50-21 PT4 PG 5 FG 2 | 2 | |
| NDT6023P | Boeing Standard 767 57-50-21 PT4 PG 6 FG 3 | 2 | |
| NDT6024 | Boeing Standard, 767 PT6 57-50-10 | 2 | |
| NDT6025-1 | Boeing Standard, 767 PT4 57-50-17 PG 6 FG 2 | 1 | |
| NDT6025-2 | Boeing Standard, 767 PT4 57-50-17 PG 6 FG 2 | 1 | |
| NDT6025-3 | Boeing Standard, 767 PT4 57-50-17 PG 6 FG 2 | 1 | |
| NDT6025-4 | Boeing Standard, 767 PT4 57-50-17 PG 6 FG 2 | 1 | |
| NDT6025-5 | Boeing Standard, 767 PT4 57-50-17 PG 6 FG 2 | 2 | |
| NDT6025-6 | Boeing Standard, 767 PT4 57-50-17 PG 6 FG 2 | 2 | |
| NDT6026 | NDT STANDARD_[NDT6026] | 1 | |
| NDT6027 | Boeing Standard 767 PT4 57-50-10 PG 9 FG2 | 3 | |
| NDT6028 | Boeing Standard 767 PT4 57-50-10 PG 10 FG 3 | 3 | |
| NDT6029 | Boeing Standard 767 PT4 57-50-10 PG 11 FG 4 | 3 | |
| NDT6030 | Boeing Standard 767 PT4 57-50-10 PG 12 FG 5 | 3 | |
| NDT6031-1 | Boeing Standard 767 PT4 57-50-18 PG 5 FG 2 Used with TEK-5076-1 | 2 | |
| NDT6031-2 | Boeing Standard 767 PT4 57-50-18 PG 5 FG 2 Used with TEK-5076-2 | 2 | |
| NDT6031-3 | Boeing Standard 767 PT4 57-50-18 PG 5 FG 2 Used with TEK-5076-3 | 2 | |
| NDT6031-4 | Boeing Standard 767 PT4 57-50-18 PG 5 FG 2 Used with TEK-5076-4 | 2 | |
| NDT6032-1 | Boeing Standard 767 PT4 57-50-19 PG 5 FG 2 Used with TEK-5077-1 | 2 | |
| NDT6032-2 | Boeing Standard 767 PT4 57-50-19 PG 5 FG 2 Used with TEK-5077-2 | 2 | |
| NDT6032-3 | Boeing Standard 767 PT4 57-50-19 PG 5 FG 2 Used with TEK-5077-3 | 2 | |
| NDT6032-4 | Boeing Standard 767 PT4 57-50-19 PG 5 FG 2 Used with TEK-5077-4 | 2 | |
| NDT6033-1 | Boeing Standard 767 PT4 57-50-12 PG5 FG2 *for TEK-5078-1 | 3 | |
| NDT6033-2 | Boeing Standard 767 PT4 57-50-12 PG5 FG2 *for TEK-5078-2 | 2 | |
| NDT6034 | Boeing Reference Standard 767 PT4 57-50-13 PG7 FG 2 | 1 | |
| NDT6035-1 | Boeing Standard 767 PT4 57-50-13 PG8 FG3 | 1 | |
| NDT6035-2 | Boeing Standard 767 PT4 57-50-13 PG8 FG3 | 1 | |
| NDT6036 | Boeing Standard, 767 PT4 57-20-04:PG7 FIG2 - ENGRAVE:p/n, s/n, logo, NTM 767 57-20-04 | 2 | |
| NDT6037 | Boeing Standard | 1 | |
| NDT6038 | Boeing Standard 767 PT4 57-50-25 PG6 FG2 *for TEK-5089-1 and -2 | 3 | |
| NDT6039 | Boeing Standard | 1 | |
| NDT6041 | Boeing Standard, 767 PT4 57-20-03 PG 7 FG 3 | 3 | |
| NDT6045 | BOEING REFERENCE STANDARD 767 PART 4 54-50-08. MATERIAL: 7075-T6 or 7075-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6045-SC1 | Boeing Transducer Guide. Material: Delrin ( Black Acetal). Used with NDT6045 Reference Standard. 767 PART 4 54-50-08 PAGE 15 FIGURE 3 | 1 | |
| NDT6045-SC2 | Boeing Transducer Guide. Material: Delrin ( Black Acetal). Used with NDT6045 Reference Standard. 767 PART 4 54-50-08 PAGE 15 FIGURE 3 | 1 | |
| NDT6046 | Boeing Standard 767 53-30-02 PT4 PG 8 FG 2 | 3 | |
| NDT6047 | Boeing Standard 767 53-30-02 PT4 PG 9 FG 3 | 2 | |
| NDT6048 | BOEING REFERENCE STANDARD 767 Part 4 27-40-02 horizontal stab inspection. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6049 | Boeing Standard 767 PT4 57-20-09 PG 5 FG 2 | 3 | |
| NDT6050 | Boeing Standard 767 PT4 57-20-09 PG 5 FG 2 | 3 | |
| NDT6051 | Boeing Standard 767 PT4 57-20-09 PG 5 FG 2 | 3 | |
| NDT6052 | BOEING REFERENCE STANDARD 767 P4, 57-50-27. UT INSPECTION OF MAIN LANDING GEAR FORWARD TRUNNION SUPPORT SIDE LOAD FITTING | 1 | |
| NDT6052G | BOEING 767 6052 REFERENCE STANDARD GUIDE. DELRIN | 1 | |
| NDT6057 | BOEING REFERENCE STANDARD 767 PART 4 54-50-11 PAGE 7 FIGURE 2. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6058 | REFERENCE STANDARD B767 | 3 | |
| NDT6059 | BOEING 767 REFERENCE STANDARD. PART 4 57-50-05 PAGE 8 FIGURE 3. MATERIAL: 15-5PH NORMALIZED. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6060 | BOEING REFERENCE STANDARD 767 | 3 | |
| NDT6061 | BOEING REFERENCE STANDARD 767 | 3 | |
| NDT6062 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6063 | BOEING REFERENCE STANDARD 767 | 3 | |
| NDT6064 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6065 | BOEING REFERENCE STANDARD 767 PART 4 54-50-09 PAGE 12 FIGURE 2. MATERIAL: 2024-T3 OR 7075 SERIES ALUMINUM.. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6066 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 11. LUG B 4340M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6067 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 9. LUG A 4340M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6068 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 15. LUG D 4340M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6069 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 13. LUG C..4340M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT607 | BOEING REFERENCE STANDARD 767 Part 6 53-80-02 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6070 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 17. LUG E 4340M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6071 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 19. LUG F 4340M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6072 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 21. LUG H 4340M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6073 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 23. LUG G 4340M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6074 | BOEING REFERENCE STANDARD 767 PART 4 54-50-10 FIGURE 2 PAGE 7. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6075 | BOEING REFERENCE STANDARD 767 PART 6 53-10-22 FIGURE 2 PAGE 5. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6076 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6077 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6078 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6079 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT607A | BOEING REFERENCE STANDARD 767 Part 6 53-80-02 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6080 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6081 | BOEING REFERENCE STANDARD 767 PART 4 54-50-16 PAGE 5 FIGURE 2 MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6082 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 13 Figure 2. Material: 7075-T6 or 7075-T7, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6083 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 14 Figure 3. Material: 7075-T7 or 7075-T6, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6084 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 15 Figure 4. Material: 7075-T6 or 7075-T7, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6085 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 16 Figure 5. Material: 7075-T6 or 7075-T7, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6086 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 17 Figure 6. Material: 7075-T6 or 7075-T7, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6088 | BOEING REFERENCE STANDARD 767 PART 4 54-50-12 PAGE 9 FIGURE 2. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6089 | BOEING REFERENCE STANDARD 767 PART 4 54-50-15 PAGE 35-37 FIGURE 10 SHEETS 1-3. MATERIAL: 15-5PH STEEL.. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6090 | BOEING REFERENCE STANDARD 767 PART 4 54-50-15 PAGE 38-40 FIGURE 10 SHEETS 1-3. MATERIAL: 15-5PH STEEL.. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6091 | BOEING REFERENCE STANDARD 767 PART 4 54-50-14 PAGE 26 FIGURE 2. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6091G1 | NDT6091 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 26 FIGURE 2. | 1 | |
| NDT6091G2 | NDT6091 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 26 FIGURE 2. | 1 | |
| NDT6092 | BOEING REFERENCE STANDARD 767 PART 4 54-50-14 PAGE 27 FIGURE 3. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6092G1 | NDT6092 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 27 FIGURE 3 | 1 | |
| NDT6092G2 | NDT6092 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 27 FIGURE 3 | 1 | |
| NDT6094 | BOEING REFERENCE STANDARD 767 PART 4 54-50-14 PAGE 29 FIGURE 5. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6096 | BOEING REFERENCE STANDARD 767 PART 4 53-60-02 FIGURE 2 PAGE 6. MATERIAL: 2024-T3 ALUMINUM WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6099 | BOEING REFERENCE STANDARD PER MARKUP 767 PT 4 57-20-01 PAGE 4 FIGURE 2 | 2 | |
| NDT6100 | BOEING REFERENCE STANDARD 767 PART 4 57-10-03 PAGE 6 FIGURE 2 MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6102 | BOEING REFERENCE STANDARD. MATERIAL: 6AL-4V TITANIUM. Includes Test Report Traceable to NIST. | 1 | |
| NDT6103 | BOEING REFERENCE STANDARD 767 PART 4 54-50-17 PAGE 5 FIGURE 2. MATERIAL: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6104 | BOEING REFERENCE STANDARD. MATERIAL: 6AL-4V TITANIUM. Includes Test Report Traceable to NIST. | 1 | |
| NDT6108 | BOEING REFERENCE STANDARD 767 PT 4 57-20-03, Figure 4 Page 9. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6109 | BOEING REFERENCE STANDARD BOEING REFERENCE STANDARD 767 PART 6 57-20-01. Includes Test Report and Certificate of Conformance. MATERIAL: 7075-T6, 2024-T3 CLAD OR BARE ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT611 | Boeing Standard, 767 PT6 54-51-02: FIG2 PG9 | 1 | |
| NDT6110A | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110B | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110C | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110D | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110E | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6111A | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 Figure 5, Sheets 1-2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6111B | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 Figure 5, Sheets 1-2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT612 | Boeing Standard 767 PT6 54-51-02: FIG2 PG9 | 1 | |
| NDT613 | Boeing Standard, 767 PT6 54-51-02: FIG2 PG9 | 3 | |
| NDT6130-1 | REFER STANDARDS | 1 | |
| NDT6130-2 | REFER STANDARDS | 1 | |
| NDT6130-3 | REFER STANDARDS | 1 | |
| NDT6130-4 | REFER STANDARDS | 1 | |
| NDT6130-5 | REFER STANDARDS | 1 | |
| NDT6130-6 | REFER STANDARDS | 1 | |
| NDT614 | Boeing Standard, 767 PT4 57-20-01:PG4 FIG2 | 3 | |
| NDT615 | Boeing Standard, 767 PT4 53-80-01:PG5 FIG2 | 1 | |
| NDT616 | Boeing Standard, 767 PT4 27-40-01:PG4 FIG2 | 1 | |
| NDT616P | REFERENCE STANDARD POSITIONER | 1 | |
| NDT617 | Boeing Standard, 767 PT6 53-80-03:PG10 FIG2 | 3 | |
| NDT618 | Boeing Standard, 767 PT6 53-80-03:PG11 FIG3 | 2 | |
| NDT618A | Boeing Standard, 767 PT6 53-80-03:PG12 FIG4 | 3 | |
| NDT619 | Boeing Standard, 767 PT4 55-10-04 PG 5 FG 2 | 3 | |
| NDT620 | Boeing Standard | 2 | |
| NDT621 | Boeing Standard, 767 PT4 57-10-01; Page 5, Figure 1 | 4 | |
| NDT622 | Boeing Standard, 767 PT6 57-20-01:PG5 FIG2 | 4 | |
| NDT623 | Boeing Standard, 767 PT4 57-10-03: PG5 FIG2 | 3 | |
| NDT624 | Boeing Standard, 767 PT4 53-80-02:PG6 FIG2 | 2 | |
| NDT625 | Boeing Standard, 767 PT4 55-10-03:PG4 FIG2 | 1 | |
| NDT627 | Boeing Standard, 767 PT4 57-10-02:PG 3 FIG 3 | 1 | |
| NDT628 | Boeing Standard, 767 PT4 53-50-01:PG5 FIG2 | 3 | |
| NDT629 | Alum to alum core shim damage defect standard | 2 | |
| NDT630 | Boeing Standard, 767 PT4 55-10-02:PG5 FIG2 | 3 | |
| NDT631 | Boeing Standard, 767 PT4 71-20-01:PG7 FIG2 | 1 | |
| NDT632 | Boeing Standard, 767 PT4 71-20-01:PG7 FIG3 | 1 | |
| NDT633 | Boeing Standard, 767 PT6 54-51-02: FIG2 PG9 | 2 | |
| NDT634 | Boeing Standard, 767 PT4 54-50-02:PG5 FIG1 | 1 | |
| NDT636 | Boeing Standard, 767 PT4 32-10-02:PG5 FIG2 *Bushing needs to be purchased | 2 | |
| NDT637 | Boeing Standard, 767 PT4 32-10-04:PG7 FIG2 *NO BID* | 1 | |
| NDT638 | Reference Standard, 767 PT4 57-40-02, Page 7 Fig 2 | 3 | |
| NDT639 | Boeing Standard, 767 PT4 54-50-02:PG5 FIG2 | 2 | |
| NDT640 | Boeing Standard, 767 PT4 54-50-01:PG5 FIG2 | 2 | |
| NDT641 | Boeing Standard, 767 PT4 54-50-01:PG5 FIG2 | 1 | |
| NDT642 | Boeing Standard, 767 PT4 53-50-02:PG6 FIG2 | 2 | |
| NDT643 | REFERENCE STANDARD | 5 | |
| NDT643-.750 | Boeing Standard, Based on NDT643 with .750 countersink, two fastener holes | 1 | |
| NDT644 | REFERENCE STANDARD | 4 | |
| NDT648 | Boeing Standard 767 PT6 53-30-06 PG 31 FG 3 | 3 | |
| NDT650 | REFERENCE STANDARD | 2 | |
| NDT651 | REFERENCE STANDARD | 2 | |
| NDT652 | REFERENCE STANDARD | 4 | |
| NDT655 | Boeing Standard, 767 PT4 54-50-03:PG7 FIG2 | 1 | |
| NDT655G | Boeing Standard, 767 PT4 54-50-03:PG9 FIG4 Tranducer Guides | 1 | |
| NDT656 | Boeing Standard, 767 PT4 54-50-03:PG8 FIG3 | 1 | |
| NDT656G | Boeing Standard, 767 PT4 54-50-03:PG9 FIG4 Tranducer Guides | 1 | |
| NDT657 | Boeing Standard,767 PT6 53-10-09: PG7 FIG 2 | 1 | |
| NDT658 | Reference Standard, 767 PT4 53-10-01:PG5 FIG2 | 2 | |
| NDT660 | REFERENCE STANDARD | 4 | |
| NDT661 | Boeing Standard | 2 | |
| NDT662 | Boeing Standard, 767 PT4 57-20-03:PG6 FIG2 | 3 | |
| NDT663A | BOEING REFERENCE STANDARD 767 Part 6 53-10-13 Page 7 Figure 3. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT663A/B | Boeing Reference Standard, 767 PT6 53-10-13:PG7 FIG3 | 1 | |
| NDT663B | BOEING REFERENCE STANDARD 767 Part 6 53-10-13 Page 7 Figure 3. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT664 | Boeing Standard,767 PT6 57-20-06: PG FIG 2 | 3 | |
| NDT664-A | BOEING REFERENCE STANDARD 767 PART 6 57-20-06. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT665 | Boeing Standard,767 PT6 53-10-06: PG6 FIG 2 | 1 | |
| NDT666A | Boeing Standard, 767 PT6 57-20-08:PG 8 FIG 3 | 2 | |
| NDT666B | Boeing Standard, 767 PT6 57-20-08:PG 9 FIG 4 | 2 | |
| NDT666C | Boeing Standard, 767 PT6 57-20-08:PG 10 FIG 5 | 2 | |
| NDT667 | REFERENCE STANDARD | 4 | |
| NDT668 | Boeing Standard, 767 PT6 57-50-01 | 3 | |
| NDT669 | Boeing Standard, 767 PART4 32-10-05: PG5 FIG2 *NO BID* | 1 | |
| NDT670 | Reference Standard, 767 PT4 53-10-02:PG5 FIG2 | 2 | |
| NDT671 | Boeing Standard, 767 PT6 53-30-12: Page 4 Figure 2 | 2 | |
| NDT672 | Boeing Standard, 767 PT6 54-50-01:PG5 FIG2 | 1 | |
| NDT674 | Boeing Standard, 767 PT4 54-50-06:PG14 FIG3 *NO BID* | 3 | |
| NDT675 | Boeing Standard, 767 PT4 54-50-06:PG15 FIG4 *NO BID* | 3 | |
| NDT676 | Boeing Standard, 767 PT6 54-50-07:PG8 FIG2 | 2 | |
| NDT679 | Boeing Standard, 767 PT4 53-50-05: PG7 FIG3 | 2 | |
| NDT680 | Boeing Standard, 767 PT4 32-10-06:PG7 FIG 2 | 2 | |
| NDT682 | Boeing Standard, 767 PT6 53-80-02:PG5 FIG2 | 4 | |
| NDT684 | Reference Standard, 767 Part 6 52-32-02, Page 5 Figure 2 | 3 | |
| NDT685 | BOEING REFERENCE STANDARD 767 Part 6 53-10-018 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT686 | Boeing Standard, 767 PT6 53-50-09, PG5, FIG3 | 3 | |
| NDT687 | Boeing Standard, 767 PT4 57-50-08:PG6 FIG3 | 2 | |
| NDT688 | Boeing Standard, 767 PT4 57-50-03:PG8 FIG2 **** USE NEW DRAWING**** | 3 | |
| NDT689 | REFERENCE STANDARD | 3 | |
| NDT689-P | REFERENCE STANDARD W | 3 | |
| NDT690 | Boeing Standard, 767 PT4 57-50-04:PG8 FIG3, TC8-1210H | 3 | |
| NDT691 | Boeing Standard, 767 PT6 57-50-08:PG6 FIG2 | 3 | |
| NDT693 | Reference Standard, 767 PT4 53-50-04 | 3 | |
| NDT694 | Boeing Standard, 767 PT4 57-50-05:PG8 FIG3 | 3 | |
| NDT695 | Boeing Standard, 767 PT4 57-50-05:PG8 FIG3 | 3 | |
| NDT697 | Boeing Standard, 767 PT4 57-50-07:PG5 FIG2 | 3 | |
| NDT697-400 | Boeing Standard, 767-400 Modified NDT697 | 1 | |
| NDT698 | Boeing Standard, 767 PT4 57-50-03:PG9 FIG3 | 3 | |
| NDT7001P | BOEING LUCITE WEDGE WITH A .315"Ø FLAT BOTTOM HOLE, 2.010" RADIUS FOR A .25"Ø STRAIGHT BEAM TRANSDUCER. USED WITH REFERENCE STANDARD NDT7001. | 1 | |
| NDT7005 | REFERENCE STANDARD NDT7005 BOEING777 | 2 | |
| NDT700A | Boeing Standard 767 57-50-04 | 1 | |
| NDT700B | Boeing Standard 767 57-50-04 | 1 | |
| NDT700C | Boeing Standard 767 57-50-04 | 1 | |
| NDT700D | Boeing Standard 767 57-50-04 | 1 | |
| NDT700E | Boeing Standard 767 57-50-04 | 1 | |
| NDT7010A | BOEING REFERENCE STANDARD | 1 | |
| NDT7010B | BOEING REFERENCE STANDARD | 1 | |
| NDT7011 | BOEING REFERENCE STANDARD | 1 | |
| NDT7013 | BOEING REFERENCE STANDARD | 1 | |
| NDT7014 | EDYCURRENT CALIBRATION STANDARD | 2 | |
| NDT7015 C | CALIBRATION REFERENCE STANDARD | 1 | |
| NDT7015-A | BOEING REFERENCE STANDARD | 1 | |
| NDT7015-B | BOEING REFERENCE STANDARD | 1 | |
| NDT7015-C | REFERENCE STANDARD | 1 | |
| NDT7019-A | REFERENCE STANDARDS | 1 | |
| NDT7019-B | REFERENCE STANDARDS | 1 | |
| NDT7023 | BOEING REFERENCE STANDARD | 1 | |
| NDT7024 | BOEING REFERENCE STANDARD | 1 | |
| NDT7029A | REFERENCE STANDARD | 2 | |
| NDT7029B | REFERENCE STANDARD | 2 | |
| NDT7029C | REFERENCE STANDARD | 2 | |
| NDT7029E | BOEING STANDARD, 777-200/300 PT4 53-40-07 PG 9-10 FG 2 | 2 | |
| NDT7029F | BOEING STANDARD, 777-200/300 PT4 53-40-07 PG 9-10 FG 2 | 2 | |
| NDT7029G | BOEING STANDARD, 777-200/300 PT4 53-40-07 PG 9-10 FG 2 | 2 | |
| NDT7029H | BOEING STANDARD, 777-200/300 PT4 53-40-07 PG 9-10 FG 2 | 2 | |
| NDT7029P | REFERENCE STANDARD | 1 | |
| NDT703 | Boeing 777 Reference Standard, Part 6, 57-60-01 | 1 | |
| NDT7031A | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-14 PAGE 6 FIGURE 2. MATERIAL: 7055-T7751, OR AIRPLANE QUALITY ALUMINUM. INCLUDES TEST REPORT AND CE | 2 | |
| NDT7031B | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-15 PAGE 11-12 FIGURE 2, SHEET 1&2 AND PART 4 57-20-13 PAGE 6 FIGURE 2. MATERIAL: 7055-T7751, OR AIR | 2 | |
| NDT7031C | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-15 PAGE 13 FIGURE 2, SHEET 3. MATERIAL: 7055-T7751, OR AIRPLANE QUALITY ALUMINUM. INCLUDES TEST RE | 1 | |
| NDT7033 | REFERENCE STANDARD | 1 | |
| NDT7034-1 | REFER STANDARDS | 1 | |
| NDT7034-2 | REFER STANDARDS | 1 | |
| NDT7038A | REFER STANDARDS | 1 | |
| NDT7038B | REFER STANDARDS | 1 | |
| NDT705 | Boeing 777 Reference Standard, Part 6, 57-40-01 | 1 | |
| NDT706 | Boeing Standard, 777 PT6 53-10-01:FIG2 PG5 | 2 | |
| NDT706P | Boeing Standard 777 PT6 53-10-01 PG6 FG3 | 3 | |
| NDT707 | Boeing Standard PT4 52-80-01 page 6 777 | 1 | |
| NDT708 | Boeing 777 Reference Standard, Part 6, 53-50-01 | 1 | |
| NDT709 | Boeing 777 Reference Standard, UT, Part 4, 57-60-01 | 1 | |
| NDT710 | Boeing 777 Reference Standard, Part 6, 54-51-01 | 2 | |
| NDT711 | Boeing 777 Reference Standard, Part 6, 54-51-01 | 2 | |
| NDT712 | Boeing 777 Reference Standard, Part 6, 54-51-01 | 2 | |
| NDT713 | Boeing Standard 777 PT6 53-10-02:PG9 FIG2 SHEET1,2 | 1 | |
| NDT714 | Boeing Standard 777 PT6 53-10-03:PG6 FIG2 | 2 | |
| NDT716 | Boeing Standard, SB 777-32A0038:PG41 FIG1 | 1 | |
| NDT717 | Boeing Standard, 777 PT4 57-20-01:PG8 FIG2 SHEET1 | 1 | |
| NDT718 | Boeing Standard, 777 PT4 57-20-01:PG9 FIG2 SHEET2 | 1 | |
| NDT719 | Boeing Standard, 777 PT4 57-20-01:PG10 FIG2 SHEET3 | 1 | |
| NDT723 | REFERENCE STANDARD | 1 | |
| NDT724 | Boeing Standard, 15-5PH Stainless | 1 | |
| NDT725 | Boeing Standard 777 55-17-01 PT4 PG8-9 Fig 2 | 2 | |
| NDT726 | Boeing Standard, Heat Teat to 180-200 KSI per MIL-H-6875 or BAC5619 | 1 | |
| NDT728 | Boeing Standard, 777 PT4 53-20-02:FIG2 | 2 | |
| NDT729 | Boeing Standard 777 PT4 53-10-03 PG4 FG2 | 1 | |
| NDT730 | Boeing Standard 777 PT4 57-54-01 PG6 FG2 | 1 | |
| NDT730-10 | REFERENCE STANDARD | 1 | |
| NDT730-4 | REFERENCE STANDARD | 1 | |
| NDT731 | Boeing Standard, 777 PT4 53-40-01:FIG2 | 3 | |
| NDT732 | Boeing Standard | 1 | |
| NDT732A | Boeing Reference Standard 777 PT4 55-17-03 PG6 FG2 | 2 | |
| NDT732B | Boeing Standard | 1 | |
| NDT733 | Boeing Reference Standard 777 PT4 53-40-03 PG7 FG2 | 2 | |
| NDT734 | Boeing Standard 777 PT4 57-54-02 PG8 FG4 | 2 | |
| NDT735 | Boeing Standard 777 PT4 53-40-02 PG6 FG2 | 2 | |
| NDT736 | Boeing Standard | 1 | |
| NDT737 | Boeing Standard 777 PT6 53-50-03 PG9 FG2 | 2 | |
| NDT737-1 | REFERENCE STANDARD | 1 | |
| NDT737-2 | REFERENCE STANDARD | 1 | |
| NDT737-3 | REFERENCE STANDARD | 1 | |
| NDT737-4 | REFERENCE STANDARD | 1 | |
| NDT737-X | REFERENCE STANDARD (NDT737-1, NDT737-2, NDT737-3 AND NDT737-4) | 1 | |
| NDT738 | Boeing Reference Standard 777 PT4 53-10-02 PG6 FG2 | 2 | |
| NDT739 | Boeing Reference Standard 777 PT4 53-10-02 PG7 FG3 | 2 | |
| NDT740 | Boeing Standard 777 PT4 53-10-01 PG6 FG2 | 2 | |
| NDT741 | Boeing Standard Boeing 777 PART4 57-12-01 page 7 | 2 | |
| NDT742B | Boeing Reference Standard, RIB 34 | 1 | |
| NDT742C | Boeing Reference Standard, RIB 36 | 1 | |
| NDT742D | Boeing Reference Standard, RIB 37 | 1 | |
| NDT744 | Boeing Standard, 777 PT4 53-10-09:FIG2 | 2 | |
| NDT745 | Boeing Standard 777 PT6 57-20-01 PG7 FG2 | 2 | |
| NDT746 | Boeing Standard 777 PT6 53-60-07 PG 7 Fig 2 | 2 | |
| NDT747 | Boeing Standard | 1 | |
| NDT747-1 | Boeing Standard 777 PT6 53-00-11 PG 33 Fig 2 | 2 | |
| NDT747-2 | Boeing Standard 777 PT6 53-00-11 PG 34 Fig 3 | 2 | |
| NDT748 | Boeing Standard 777 PT4 54-51-01 PG 14 Fig 2 | 1 | |
| NDT749 | Boeing Reference Standard 777 PT6 57-20-03 PG 7 FG 2 | 2 | |
| NDT750 | Boeing Standard | 1 | |
| NDT751 | Boeing Standard, Ø1.62 | 1 | |
| NDT752 | Boeing Standard, Ø1.747 | 1 | |
| NDT753 | Boeing Standard | 2 | |
| NDT754 | Boeing Standard 777 PT6 53-80-03 PG 5 FG 3 | 2 | |
| NDT755 | Boeing Standard 777 53-60-07 PT6 PG 8 Fig 3 | 2 | |
| NDT756 | Boeing Standard 777 53-60-07 PT6 PG 9 Fig 4 | 2 | |
| NDT757 | Boeing Reference Standard 777 PT4 57-20-03 PG 7 FG 2 | 1 | |
| NDT757A | REFERENCE STANDARD | 1 | |
| NDT758 | Boeing Standard, | 1 | |
| NDT759 | Boeing Standard | 1 | |
| NDT760 | Boeing Standard 777 PT6 53-60-06 PG 6-7 FG 2 | 2 | |
| NDT761 | Boeing Standard | 2 | |
| NDT761 R&D | Boeing Standard | 1 | |
| NDT762 | Boeing Standard | 2 | |
| NDT763 | Boeing Standard 777 PT4 54-51-04 PG 7 FG 2 | 2 | |
| NDT766 | Boeing Standard 777, 57-10-02 PT4 pg9 | 2 | |
| NDT766A | REFERENCE STANDARDS | 2 | |
| NDT767 | Boeing Standard, 777 57-10-02, PT4 page11 | 2 | |
| NDT767A | REFERENCE STANDARDS | 2 | |
| NDT768 | Boeing Reference Standard 777 PT4 57-10-01 PG 6 FG 2 | 2 | |
| NDT769 | Boeing Reference Standard 777 PT4 57-10-01 PG 7 FG 3 | 2 | |
| NDT770 | Boeing Reference Standard | 2 | |
| NDT771 | Boeing Reference Standard | 2 | |
| NDT772 | Boeing Reference Standard 777 PT4 57-10-04 PG 18 FG 4 | 2 | |
| NDT773 | Boeing Reference Standard 777 PT4 57-10-04 PG 19 FG 5 | 2 | |
| NDT773-G1 | TRANSDUCER GUIDE THE TRANSDUCER GUIDE IS USED WITH REFERENCE STANDARD NDT773 ONLY | 2 | |
| NDT774 | Boeing Reference Standard | 2 | |
| NDT775 | Boeing Reference Standard 777 PT6 54-51-15 PG 5 FG 2 | 1 | |
| NDT776 | Boeing Reference Standard 777 PT4 54-51-03 PG 7 FG 2 *make part out of 2024-T3, heat treat to 2024-T8 | 2 | |
| NDT777 | Boeing Standard, FIG2, T6AL-4V | 1 | |
| NDT778 | Boeing Reference Standard, 777 PT4 78-30-05 PG 8-9 FG 2 | 1 | |
| NDT779 | Boeing Reference Standard 777 PT4 55-51-01 PG 15 FG 3 | 1 | |
| NDT780-A | Boeing Standard 777 PT4 57-50-01 PG 7 FG 2, TEK-5828-1 | 1 | |
| NDT780-B | Boeing Standard 777 PT4 57-50-01 PG 7 FG 2, TEK-5828-2 | 1 | |
| NDT780-C | Boeing Standard 777 PT4 57-50-01 PG 7 FG 2, TEK-5828-3 | 1 | |
| NDT780-D | Boeing Standard 777 PT4 57-50-01 PG 7 FG 2, TEK-5828-4 | 1 | |
| NDT780-E | Boeing Standard 777 PT4 57-50-01 PG 7 FG 2, TEK-5828-5 | 1 | |
| NDT780-F | Boeing Standard 777 PT4 57-50-01 PG 7 FG 2, TEK-5828-6 | 1 | |
| NDT781 | Boeing Standard 777 57-40-02 PT6 PG 6 | 2 | |
| NDT784 | Boeing Standard | 1 | |
| NDT785 | Boeing Standard | 1 | |
| NDT786-A | Boeing Standard 777 PT6 57-10-04 PG 6 FG 2 | 2 | |
| NDT786-B | Boeing Standard 777 PT6 57-10-04 PG 6 FG 2 | 2 | |
| NDT786A | EDYCURRENT CALIBRATION STANDARD | 2 | |
| NDT787 | Boeing Standard 777 53-80-06 PT6 PG 8 FG 2 | 2 | |
| NDT789 | Boeing Standard 777 PT6 57-20-03 PG 17 FG 3 | 1 | |
| NDT790 | Boeing Standard 777 PT6 57-20-03 PG 18 FG 4 | 1 | |
| NDT791 | Boeing Standard 777 PT6 57-20-03 PG 19 FG 5 | 1 | |
| NDT792 | Boeing Standard 777 PT6 57-20-03 PG 20 FG 6 | 1 | |
| NDT797 | BOEING REFERENCE STANDARD 777-200/300 PART 4 53-40-06 PG.11 FIGURE 2. MATERIAL: 7075-T7 ALUMINUM WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT799 | BOEING REFERENCE STANDARD 757 Part 4 51-00-05 Page 7 Figure 2. 777-200/300 Part 4 51-00-05 Page 8 Figure 1. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT801 | BOEING STANDARD | 1 | |
| NDT803A | BOEING REFERENCE STANDARD ABS PLASTIC THICKNESS MEASUREMENT. PART 4 51-00-07 page 11 figure 2 | 2 | |
| NDT803B | BOEING REFERENCE STANDARD ABS PLASTIC THICKNESS MEASUREMENT. PART 4 51-00-07 page 11 figure 2 | 2 | |
| NDT807 | Boeing Standard | 1 | |
| NDT809 | BOEING STANDARD 787 PT6 51-00-10 PG6 *still in the developing stages | 1 | |
| NDT811 | BOEING CALIBRATION STANDARD FIGURE 3 DETAIL II. MATERIAL: 2024-T351 ALUMINUM or 7075-T651 ALUMINUM. | 1 | |
| NDT813 | Reference Standard 0.200" Length x 0.040" Deep x 0.010" width; 6AL-4V | 1 | |
| NDT814 | Reference Standard; .200" long x 0.040" deep x 0.010" width; 6AL-4V | 1 | |
| NDT815 | BOEING REFERENCE STANDARD 787 Part 4 57-10-01 Page 10 Figure 2. Material: 2024 or 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT815-G1 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NDT815-G2 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815. | 1 | |
| NDT815-G3 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815. | 1 | |
| NDT815-G4 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NDT815-G5 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NDT815-G6 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NDT816 | BOEING REFERENCE STANDARD 787 part 4 57-10-02 Figure 2. MATERIAL: 6AL-4V TITANIUM. Includes Certification Report and Certificate of Conformance. | 2 | |
| NDT817 | BOEING REFERENCE STANDARD 787 Part 4 51-00-23 Page 5 Figure 2. Material: Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDTA1051 | REFERENCE STANDARD | 1 | |
| NDTE04-0102-03 | REFERENCE STANDARD | 1 | |
| NDTE04-0102-04 | REFERENCE STANDARD | 1 | |
| NDT_MAT/ULT/183 | CALIBRATION TEST STANDARD | 1 | |
| NDY6032-4 | REFERENCE STANDARD | 1 | |
| NEC-6037 | Eddy current standard | 1 | |
| NEC-6151-SD | REFERENCE STANDARD - | 1 | |
| NEC-6153 | AIR TRACTOR: NDT ENGENEERING REFERENCE STANDARD | 1 | |
| NEC-6252 | boeing ec reference standard w/cert | 1 | |
| NEC-6293-1 | SPECIAL PURPOSE EC REF STANDARD W/CERTS | 1 | |
| NEC-6429 | BOLT HOLE REFERENCE STANDARD | 1 | |
| NEC-6433 | REFERENCE STANDARD | 1 | |
| NEC396 | Reference Standard | 1 | |
| NEC6382 | REFERENCE STANDARD | 1 | |
| NEC6384 | REFERENCE STANDARD | 1 | |
| NEC6407 | REFERENCE STANDARD | 1 | |
| NEC6433 | REFERENCE STANDARD | 1 | |
| NEK-9030 | KIT, INSPECTION, ULTRASONIC (STANDARD) | 1 | |
| NEK-9030-9030FB | KIT, INSPECTION, ULTRASONIC (STANDARD) | 1 | |
| NRK-3A | CTS-PH-TOOL, CONFIRM FROM NDT FOR STANDARD | 1 | |
| NRK-3AL | CTS-PH-TOOL, CONFIRM FROM NDT FOR STANDARD | 2 | |
| NRK-3AST | CUSTOM NAVY BLOCK SET, 3 Blocks Total. Materials: 7075-T6 Aluminum, 4340 Cres Steel and 6AL-4V Titanium. Each Standard Includes 20 Fastener Holes (.156-.750) Containing a total of 71 EDM Notches. All Standards Manufactured in Accordance with U.S.A.F. ... | 1 | |
| NRK-3S | CTS- PH-TOOL,CONFIRM FROM NDT FOR STANDARD | 1 | |
| NRK-3S/17-4 | CUSTOM NAVY REFERENCE STANDARD. MATERIAL: 17-4PH TH1050 STAINLESS STEEL. CONTAINS 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Conformance. | 1 | |
| NRK-3S/17-7 | CUSTOM NAVY REFERENCE STANDARD. MATERIAL: 17-7PH STAINLESS STEEL. CONTAINS 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Conformance. | 1 | |
| NRK-3SS | REFERENCE STANDARD | 1 | |
| NRK-3X | STANDARD KIT | 1 | |
| NRK-CASE | CASE FOR EDDY CURRENT STANDARD TOOL | 1 | |
| NRK−3S | CTS- PH-TOOL,CONFIRM FROM NDT FOR STANDARD | 1 | |
| NRM-003 | EXTENDED CANOPY COVER (standard windshield) | 1 | |
| Niton XL2T 980 GOLDD | Niton XL2T 980 GOLDD - Standard analytical range of + 25 elements, Light element detection (Mg-S), Modes for General Metals, Precious Metals, Mining and Plastics | 1 | |
| OBSMAINT | OBSMAINT;Annual Software Maintenance - Observer Standard | 1 | |
| OBSRTU-SUB-1 | OBSRTU-SUB-1;One-year subscription for Observer Standard Right-To-Use License | 1 | |
| OBSRTU-SUB-3 | OBSRTU-SUB-3;Three-year subscription for Observer Standard Right-To-Use License | 1 | |
| OE X10B | WRENCH, COMBINATION, STANDARD LENGTH, 5/16IN, 12-POINT | 3 | |
| OE X12B | WRENCH,COMBINATION, STANDARD LENGTH, 3/8IN, 12-POINT | 4 | |
| OE X14B | WRENCH, COMBINATION, STANDARD LENGTH, 7/16IN, 12-POINT | 4 | |
| OEX10B | 5/16" STANDARD COMBINATION WRENCH | 3 | |
| OEX11B | 11/32" STANDARD COMBINATION WRENCH | 3 | |
| OEX12B | WRENCH,COMBINATION, STANDARD LENGTH, 3/8IN, 12-POINT | 4 | |
| OEX14B | WRENCH, COMBINATION, STANDARD LENGTH, 7/16IN, 12-POINT | 4 | |
| OEX16B | WRENCH, COMBINATION, STANDARD LENGTH, 1/2IN, 12-POINT | 4 | |
| OEX18B | WRENCH, COMBINATION, STANDARD LENGTH, 9/16IN, 12-POINT | 3 | |
| OEX20B | WRENCH, COMBINATION, STANDARD LENGTH, 5/8IN, 12-POINT | 3 | |
| OEX22B | 11/16" STANDARD COMBINATION WRENCH | 4 | |
| OEX24B | 3/4" STANDARD COMBINATION WRENCH | 5 | |
| OEX26B | 13/16" STANDARD COMBINATION WRENCH | 4 | |
| OEX28B | 7/8" STANDARD COMBINATION WRENCH | 4 | |
| OEX30B | 15/16" STANDARD COMBINATION WRENCH | 4 | |
| OEX32B | 1" STANDARD COMBINATION WRENCH | 4 | |
| OEX34B | 1-1/16" STANDARD COMBINATION WRENCH | 2 | |
| OEX36B | 1-1/8" STANDARD COMBINATION WRENCH | 3 | |
| OEX42B | WRENCH COMBINATION STANDARD LENGTH | 3 | |
| OEX46B | WRENCH COMBINATION STANDARD LENGTH | 2 | |
| OEX64A | TOOLING / WRENCH, COMBINATION, STANDARD LENGTH, 2, 12-POINT | 2 | |
| OEX724K | COMBO WRENCHES STANDARD 1/4-1 5/8 | 4 | |
| OEX8B | WRENCH, COMBINATION, STANDARD LENGTH, 1/4IN, 12-POINT | 5 | |
| OH58-300 | BLADE COVERS, standard type (set of 4) | 1 | |
| OM2-1522 | HI-LOK® STANDARD PROTRUSION GUAGES | 1 | |
| OM2-1522 HST | HI-LOK® STANDARD PROTRUSION GUAGES | 1 | |
| OMK-WLS-STD | OMK-WLS-STD;OMK Wireless Contractor Standard Package | 1 | |
| OPL5 | CARABINER, STANDARD LOCKING | 1 | |
| OPO5 | CARABINER, STANDARD OVAL | 1 | |
| OSH10B | Wrench, Combination, Standard Length, 5/16", 6-Point | 1 | |
| OSH11B | Wrench, Combination, Standard Length, 11/32", 6-Point | 1 | |
| OTCCEA-04 | STANDARD SIZE ADAPTER CONNECT | 1 | |
| OXD3307380K | OXD3307380K STANDARD 8 INCH VERNIER | 1 | |
| Olympus Phased Array Weld Inspection Kit | Olympus Phased Array Weld Inspection Kit - he kit contains the following items:, qty 2 A12 5L64 PA probes with 5m cable., qty 2 SA12 N55S Standard Wedge with Removable IHC Ring, qty 1 ‘Y’ Splitter 64/64, for Omniscan MX2, 5m split conduit, Irrigation Tubi | 1 | |
| P21160 | BEARING (STANDARD) | 1 | |
| P39 | ULTIMA STEEL HYDRAULIC HAND PUMP, S STANDARD PUMP | 8 | |
| P59 | PUMP P59-standard 1 speed 325psi 2-nd speed 10000psi | 3 | |
| P60507 | ENGINE, FULL, STANDARD AIR/TRUCK COVER | 1 | |
| P7 | LEDLENSER P7 FLASHLIGHT - TORCH - BLACK, STANDARD | 1 | |
| P8-ET-57-20-04-P006A | Boeing Standard | 1 | |
| P8-ET-57-20-04-P006B | BOEING STANDARD | 1 | |
| P8-ET-57-20-04-P006C | BOEING STANDARD | 1 | |
| P8-ET-57-53-26-301 | Boeing Standard | 1 | |
| P8-ET-57-53-26-P01 | Boeing Standard | 1 | |
| P8-STD-3136 | BOEING STANDARD | 1 | |
| P8-STD-P001 | Boeing Standard | 1 | |
| P8-STD-P001A | BOEING STANDARD | 1 | |
| P8-STD-P001B | BOEING STANDARD | 1 | |
| P8-STD-P001MIDDLE | BOEING STANDARD MIDDLE PLATE ONLY | 1 | |
| P8-STD-P002 | Boeing Standard | 1 | |
| P8-STD-P003A | Boeing Standard | 1 | |
| P8-STD-P003B | Boeing Standard | 1 | |
| P8-STD-P004A | Boeing Standard | 1 | |
| P8-STD-P004B | Boeing Standard | 1 | |
| P8-STD-P004C | Boeing Standard | 1 | |
| P8-STD-P005 | Boeing Standard | 1 | |
| P8-STD-P005 TEST | Boeing Standard | 1 | |
| P8-STD-P006B | BOEING STANDARD | 1 | |
| P8-STD-P007A | Boeing Standard | 1 | |
| P8-STD-P008A | BOEING STANDARD | 1 | |
| P8-STD-P008B | BOEING STANDARD | 1 | |
| P8-STD-P009 | Boeing Standard | 1 | |
| P8-STD-P010 | Boeing Standard | 1 | |
| P8-STD-P011 | Boeing Standard | 1 | |
| P8-STD-P012 | Boeing Standard | 1 | |
| P8-STD-P013 | Boeing Standard formally part number 55-10-04--B4 | 1 | |
| P8-STD-P014 | BOEING STANDARD | 1 | |
| P8-STD-P016 | Boeing Standard | 1 | |
| P8-STD-P017A | Boeing Standard | 1 | |
| P8-STD-P017B | Boeing Standard | 1 | |
| P8-STD-P017C | Boeing Standard | 1 | |
| P8-STD-P017D | Boeing Standard | 1 | |
| P8-STD-P017E | Boeing Standard | 1 | |
| P8-STD-P017F | Boeing Standard | 1 | |
| P8-STD-P018 | Boeing Standard | 1 | |
| P8-STD-P019A | BOEING STANDARD | 1 | |
| P8-STD-P019B | BOEING STANDARD | 1 | |
| P8-STD-P020 | BOEING STANDARD | 1 | |
| P8-STD-P021 | Boeing Standard | 1 | |
| P8-STD-P022A | BOEING STANDARD | 1 | |
| P8-STD-P022B | BOEING STANDARD | 1 | |
| P8-STD-P022C | BOEING STANDARD | 1 | |
| P8-STD-P023 | BOEING STANDARD | 1 | |
| P8-STD-P031A | Boeing Standard | 1 | |
| P8-STD-P031B | Boeing Standard | 1 | |
| P8-STD-P031C | Boeing Standard | 1 | |
| P8-STD-P031D | Boeing Standard | 1 | |
| P8-STD-P031E | Boeing Standard | 1 | |
| P8-STD-P031F | Boeing Standard | 1 | |
| P8-STD-P031G | Boeing Standard | 1 | |
| P8-STD-P033 | Boeing Standard 6AL-4V, 1.375 Diameter | 1 | |
| P8-STD-P034 | Boeing Standard 6AL-4V, 1.438 Diameter | 1 | |
| P8-STD-P035 | Boeing Standard 6AL-4V, 1.50 Diameter | 1 | |
| P8-STD-P036 | Boeing Standard 6AL-4V & 2024-T3 Muti-Layered. 20 Holes, 40 corner notches | 1 | |
| P8-STD-P037-AL | Boeing Standard 2024-T3 | 1 | |
| P8-STD-P037-TI | Boeing Standard 6AL-4V | 1 | |
| P8-STD-P038A | Boeing Standard | 1 | |
| P8-STD-P038B | Boeing Standard | 1 | |
| P8-STD-P039 | Boeing Standard TI-6AL-4V | 1 | |
| P8-STD-P3102 | BOEING STANDARD | 1 | |
| P8-STD-P3136 | BOEING STANDARD | 1 | |
| P801 | STANDARD P801 HAND PUMP | 5 | |
| P8A-STD-P028B | Reference Standard, Top layer .100" 2024T3, 2nd layer .100" 2024T3, 3rd layer .080" 7075T6 | 1 | |
| P8STD-P018B | Boeing Standard | 1 | |
| PA24-200 | WING COVERS (standard wingtips), WINTER USE (set of 2) | 1 | |
| PA24-205 | WING COVERS (standard wingtips), ALL YEAR USE (set of 2) | 1 | |
| PA24-240 | WING COVERS (standard wingtips), hail protection type, WINTER USE (set of 2) | 1 | |
| PA24-245 | WING COVERS (standard wingtips), hail protection type, ALL YEAR USE (set of 2) | 1 | |
| PA24-900 | WINDSHIELD HEATSHIELD (standard windshield) | 1 | |
| PA31-100 | ENGINE INLET PLUGS (STANDARD MODEL) (set of 4) | 1 | |
| PAB050445ST | PALPEUR A ANGLE MINIATURE HARISONIC STANDARD SERIES 5.0 MHZ, 0.250"X O.250, 45 DEGREE SHEAR IN STEEL, RIGHT ANGLE MICRODOT CONNECTOR | 1 | |
| PASSCALDMM | STANDARD CALIBRATION CERTIFICATE NEW MULTIMETER | 1 | |
| PASSCALTHERM | STANDARD CALIBRATION CERTIFICATE | 1 | |
| PB017-712-1231 | STANDARD-CONDUCTIVITY | 1 | |
| PC7-100 | ENGINE PLUGS (standard design: Main Inlet & 3 smaller wedge plugs) (set of 4) | 1 | |
| PC7-HP1 | PITOT COVER (standard design) | 1 | |
| PDL 1030 | CALIBRATION STANDARD | 1 | |
| PDL 1030J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG17 PG24 | 2 | |
| PDL 1034 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26, engrave per drawing Standard | 1 | |
| PDL 1034/1040 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26, engrave per drawing Standard + Guide | 1 | |
| PDL 1034J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26, engrave per drawing Standard | 1 | |
| PDL 1034J/1040J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26 & PG27, engrave per drawing, Standard + Guide | 2 | |
| PDL 1037A | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG20 PG30 | 2 | |
| PDL 1037A/B | Calibration Standard, TO 1C-130J-36 20-40-00 PG31:FIG20, 2 Saw cuts | 1 | |
| PDL 1037AJ | Calibration Standard, TO 1C-130J-36 20-40-00 PG30:FIG20 | 1 | |
| PDL 1037B | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG21 PG31 | 2 | |
| PDL 1037BJ | Calibration Standard, TO 1C-130J-36 20-40-00 PG31:FIG21 | 1 | |
| PDL 1040 | Calibration Standard, C130 20-40-00 Fig 18 GP26 Probe Guide | 1 | |
| PDL 1040J | Calibration Standard, C130 20-40-00 Fig 18 GP26 Probe Guide | 1 | |
| PDL 1081 | Calibration Standard, Foward Fuselage Skin/Doulber, Fg 6-22 Pg 6-97 | 1 | |
| PDL 1155 | Calibration Standard, Calibration Standard, C130 SMP 515-C-NDI 20-40-00 | 2 | |
| PDL 1199 | Calibration Standard, L1011 PT4 093-32-238:PG17 FIG2 | 1 | |
| PDL 1214J | Calibration Standard, C13J SMP 515-C-NDI 20-40-00:FIG22 PG32 | 2 | |
| PDL 1215J | Calibration Standard, C130J SMP 515-C-NDI 20-40-00:FIG23 PG33 | 2 | |
| PDL 1217AJ | Calibration Standard, C130J SMP 515-C-NDI 20-40-00:FIG24 PG34 | 1 | |
| PDL 1217BJ | Calibration Standard, C130J SMP 515-C-NDI 20-40-00:FIG25 PG35 | 1 | |
| PDL 1217CJ | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG25 PG35 | 1 | |
| PDL 1252 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 | 1 | |
| PDL 1253 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 | 1 | |
| PDL 1254J | Calibration Standard Figure 27 20-40-00 PG1 | 2 | |
| PDL 1257 | C130J Calibration Standard 20-40-00 Pg 1-2 Fg 22 | 1 | |
| PDL 1258 | C130J Calibration Standard 20-40-00 Pg 1 Fg 23 | 1 | |
| PDL 1259 | C130J Calibration Standard 20-40-00 Pg 1-2 Fg 24 | 1 | |
| PDL 389 | CALIBRATION STANDARD LM AERO | 1 | |
| PDL 389J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG1 PG3 | 2 | |
| PDL 419J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG2 PG4 | 1 | |
| PDL 422J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG3 PG5 | 1 | |
| PDL 447 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG4 PG6 | 1 | |
| PDL 447J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG4 PG6 | 2 | |
| PDL 449 | CALIBRATION STANDARD: LOCKHEED MARTIN AERONAUTICS | 1 | |
| PDL 449J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG5 PG7 | 1 | |
| PDL 457A | CALIBRATION STANDARD, C130 SMP 515-C-NDI 20-40-00:FIG6 PG8 | 1 | |
| PDL 457AJ | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG6 PG8 | 2 | |
| PDL 457S | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG6 PG8 | 1 | |
| PDL 457SJ | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG6 PG8 | 2 | |
| PDL 457SS | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG6 PG8 | 2 | |
| PDL 459J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG7 PG10 | 1 | |
| PDL 522J | Calibration Standard, C130 SMP, 522 | 1 | |
| PDL 601 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 Probe Guide Set PDL 601-101 thru 109 | 1 | |
| PDL 601J | CALIBRATION STANDARD FIGURE 20-29 | 1 | |
| PDL 624 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 Probe Guide Set PDL 624-101 thru 109 | 1 | |
| PDL 843 | CALIBRATION STANDARD | 1 | |
| PDL 843J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG9 PG12 | 2 | |
| PDL 874 | CALIBRATION STANDARD 20-40-00 FIG 10 | 1 | |
| PDL 917 | Calibration Standard, C130 SMP 515-C-NDI FIG2 | 2 | |
| PDL 919 | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 11 SHEET 1&2, 7075-T6 ALUMINUM, FASTENERS (HL64PB-10-9, HLT114-6-8, HLT18PB-12, HL70) | 2 | |
| PDL 919J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG11 PG14 | 1 | |
| PDL 920 | CALIBRATION STANDARD FIGURE 12 FASTENER (HLT114-6-8, HLPB8-8, HL18PB10-8, HL 206-4) | 2 | |
| PDL 920J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG12 PG16 | 1 | |
| PDL 941J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG13 PG19 | 1 | |
| PDL 943 | CALIBRATION STANDARD | 1 | |
| PDL 943J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG14 PG20 | 2 | |
| PDL 944-2 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG15 PG21 | 1 | |
| PDL 944-2J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG15 PG21 | 2 | |
| PDL 944-J | CALIBRATION STANDARD FIGURE 15 FASTENER (HL40-6-5 + HL70-6, NAS6208-11 + KFN5428), 7075-T6 ALUMINUM | 1 | |
| PDL 958 | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 PAGE 23 FIGURE 16 2024-T3 ALUMINUM | 1 | |
| PDL 958J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG16 PG23 | 1 | |
| PDL 980 | C-130 Lower Engine Mount Longeron-Fwd End Calibration Standard. 7075-T6 Aluminum... | 1 | |
| PDL-1030 | CALIBRATING STANDARDS | 1 | |
| PDL-1155 | CALIBRATING STANDARDS | 2 | |
| PDL-1214J | CALIBRATING STANDARDS | 2 | |
| PDL-419 | CALIBRATING STANDARDS (AS ILLUSTRATED SP-96) | 1 | |
| PDL-457A | CALIBRATING STANDARDS, BOLT HOLE, ALUMINUM 7075-T6 | 1 | |
| PDL-457S | CALIBRATING STANDARDS, BOLT HOLE, STEEL 4340 | 1 | |
| PDL-459 | CALIBRATING STANDARDS | 1 | |
| PDL-843 | CALIBRATING STANDARDS | 1 | |
| PDL-917 | CALIBRATING STANDARDS | 2 | |
| PDL-919 | CALIBRATING STANDARDS | 2 | |
| PDL-920 | CALIBRATING STANDARDS | 2 | |
| PDL-944-2 | CALIBRATING STANDARDS | 1 | |
| PDL-980 | CALIBRATING STANDARDS | 1 | |
| PDL-OWS7290 | Rear Beam Pylon Attach Fitting Calibration Standard | 1 | |
| PDL1034 | CALIBRATION STANDARD, C130 SMP 515-C-NDI 20-40-00: | 1 | |
| PDL1252 | CALIBRATION STANDARD, C130 SMP 515-C-NDI 20-40-00 | 1 | |
| PDL389 | CALIBRATION STANDARD ALUMINUM | 1 | |
| PDL419 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL422 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL447 | CALIBRATION STANDARD, C130 SMP 515-C-NDI 20-40-00:FIG4 PG6 | 1 | |
| PDL457A | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL457AJ | CALIBRATION STANDARD | 2 | |
| PDL459 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL525 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL621 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL843 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL843J | CALIBRATION STANDARD | 2 | |
| PDL920 | CALIBRATION STANDARD FIGURE 12 FASTENER HLT114-6- | 2 | |
| PF54124-2P | CHARGING EQUIPMENT - FLUID, STANDARD | 1 | |
| PN 314150 | COUPLING, GREASE GUN, SHAFER TYPE NOZZLE - THREAD 1/8" NPTF(F)SIMILAR (WHICH COMPLY WITH STANDARD MS24203-1) | 1 | |
| POSITECTOR 6000 NS1 | STANDARD BODY, NON FERROUS PROBE, 0-1500UM | 2 | |
| POSITECTOR6000-NS1 | COATING THICKNESS GAUGE (STANDARD BODY, NON FERROUS PROBE, 0-1500UM) | 2 | |
| PRO-400B | LCNDT PRO-400B STANDARD INTENSITY, BROAD-BEAM LED UV + WHITE LIGHT LAMP, INCLUDES BATTERY, 110-220V | 1 | |
| PS-COTS-QSG | PS-COTS-QSG;One-day Onsite Standard QuickStart Services Training for Observer COTS | 1 | |
| PS-STANDARD-QUICKSTART-3 | PS-STANDARD-QUICKSTART-3;Three-Day Onsite Standard QuickStart Services Training | 1 | |
| PS4-070 | LOCK RING, STANDARD LARGE | 1 | |
| PS4312-2H | STANDARD PAD | 1 | |
| PSD60-2R | UNIT TEST CARBURANT + Standard Accessories (cable 58345 + Operation Manual) | 27 | |
| PSV-STANDARD-QSG-3 | PSV-STANDARD-QSG-3;3-Day Onsite QuickStart Services Voucher - Valid for 6 months from purchase | 1 | |
| PT2500-12 | 1 IN HD STANDARD ANVIL | 1 | |
| PTS-1 | 853;PTS-1 Precision Transfer Standard | 1 | |
| PTS-3 | PTS-3;PTS-3 Calibration Transfer Standard | 1 | |
| PWA 107711 | CALIBRATION STANDARD | 1 | |
| PWA 75523 | STANDARD TOOL | 1 | |
| PWA 75947 | NDI TOOL MASTER STANDARD | 1 | |
| PWA101043 | STANDARD, SENSITIVITY, ENGINE ASSEMBLY, LPC, BLADE, 1.6 STAGE | 2 | |
| PWA101418 | STANDARD HEXHEAD, 8-32 X 1.5 INCH (38.1MM) | 3 | |
| PWA102805 | STANDARD, SENSITIVIT | 1 | |
| PWA104625 | SENSITIVITY SETTING STANDARD | 1 | |
| PWA105249 | SENSITIVITY SETTING STANDARD | 1 | |
| PWA21350-47 | STANDARD X-RAY | 1 | |
| PWA28403 | CRACK STANDARD-EDDY CURRENT 1ST STAGE FAN BLADE | 4 | |
| PWA28403B | CRACK STANDARD | 1 | |
| PWA45938 | CRACK STANDARD | 1 | |
| PWA45942 | CRACK STANDARD | 1 | |
| PWA46326 | Sensitinity Standard | 1 | |
| PWA46346 | Sensitinity Standard | 1 | |
| PWA84306 | EDDY CURRENT STANDARD & CAL CARD | 1 | |
| PWA84314 | SPL-15004 - EDGE CRACK CALIBRATION STANDARD | 1 | |
| PWC45291 | EDDY CURRENT CALIBRATION STANDARD | 1 | |
| PWC71565 | CALIBRATION STANDARD | 1 | |
| Q2500398 | REFERENCE STANDARD | 1 | |
| Q2501321 | CREF5-1725324559 EC STANDARD | 1 | |
| QC7091/10.1MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 10.1mm hole standard 6AL-4V Ti | 1 | |
| QC7091/10.45MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 10.45mm hole standard Inconel 718 | 1 | |
| QC7091/10.5MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 10.5mm hole standard 4130 STEEL | 1 | |
| QC7091/10.6MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 10.6mm hole standard 6AL-4V Ti | 1 | |
| QC7091/10.8MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 10.8mm hole standard 4130 STEEL | 1 | |
| QC7091/11.1MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 11.1mm hole standard Inconel 718 | 1 | |
| QC7091/11.3MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 11.3mm hole standard 4130 STEEL | 1 | |
| QC7091/11.5MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 11.5mm hole standard Inconel 718 | 1 | |
| QC7091/12.7MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 12.7mm hole standard 4130 STEEL | 1 | |
| QC7091/12.93MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 12.93mm hole standard Inconel 718 | 1 | |
| QC7091/13.09MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 13.09mm hole standard Inconel 718 | 1 | |
| QC7091/13.5MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 13.5mm hole standard Inconel 718 | 1 | |
| QC7091/13.5MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 13.5mm hole standard 4130 STEEL | 1 | |
| QC7091/13.5MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 13.5mm hole standard 6AL-4V Ti | 1 | |
| QC7091/13.9MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 13.9mm hole standard 6AL-4V Ti | 1 | |
| QC7091/14.5MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 14.5mm hole standard Inconel 718 | 1 | |
| QC7091/14.6MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 14.6mm hole standard 4130 STEEL | 1 | |
| QC7091/15.3MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 15.3mm hole standard 4130 STEEL | 1 | |
| QC7091/15.3MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 15.3mm hole standard 6AL-4V Ti | 1 | |
| QC7091/2.8MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 2.8mm hole standard 6AL-4V Ti | 1 | |
| QC7091/2.9MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 2.9mm hole standard 6AL-4V Ti | 1 | |
| QC7091/24.1MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 24.1mm hole standard 6AL-4V Ti | 1 | |
| QC7091/25MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 25mm hole standard 4130 STEEL | 1 | |
| QC7091/27.8MM INCONEL 718 | Rolls Royce 50mm x 50mm x 6mm 27.8mm hole standard Inconel 718 | 1 | |
| QC7091/3.12MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 3.12mm hole standard Inconel 718 | 1 | |
| QC7091/3.1MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 3.1mm hole standard 4130 STEEL | 1 | |
| QC7091/4.1MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 4.1mm hole standard 4130 STEEL | 1 | |
| QC7091/4.2MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 4.2mm hole standard 6AL-4V Ti | 1 | |
| QC7091/4.65MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 4.65mm hole standard Inconel 718 | 1 | |
| QC7091/4.85MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 4.85mm hole standard Inconel 718 | 1 | |
| QC7091/5.95MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 5.95mm hole standard 4130 STEEL | 1 | |
| QC7091/6.15MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 6.15mm hole standard 6AL-4V Ti | 1 | |
| QC7091/6.1MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 6.1mm hole standard 4130 STEEL | 1 | |
| QC7091/6.35MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 6.35mm hole standard Inconel 718 | 1 | |
| QC7091/6.45MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 6.45mm hole standard 4130 STEEL | 1 | |
| QC7091/6.65MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 6.65mm hole standard Inconel 718 | 1 | |
| QC7091/6MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 6mm hole standard Inconel 718 | 1 | |
| QC7091/7.3MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 7.3mm hole standard 4130 STEEL | 1 | |
| QC7091/7.3MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 7.3mm hole standard 6AL-4V Ti | 1 | |
| QC7091/7.9MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 7.9mm hole standard 4130 STEEL | 1 | |
| QC7091/7MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 7mm hole standard Inconel 718 | 1 | |
| QC7091/7MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 7mm hole standard 4130 STEEL | 1 | |
| QC7091/8.2MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 8.2mm hole standard 6AL-4V Ti | 1 | |
| QC7091/8.5MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 8.5mm hole standard 6AL-4V Ti | 1 | |
| QC7091/8.98MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 8.98mm hole standard Inconel 718 | 1 | |
| QC7091/8.9MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 8.9mm hole standard 4130 STEEL | 1 | |
| QC7091/8MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 8mm hole standard 6AL-4V Ti | 1 | |
| QC7091/9.3MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 9.3mm hole standard Inconel 718 | 1 | |
| QC7091/9.3MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 9.3mm hole standard 6AL-4V Ti | 1 | |
| QC7091/9.7MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 9.7mm hole standard 6AL-4V Ti | 1 | |
| QC7091/9MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 9mm hole standard 6AL-4V Ti | 1 | |
| QO-QTS-TI-03-001 | Air Force reference standard Detail#1. Material 7075-T6 Aluminum. EDM Notch size: .050" x .050" x .005" Max Width, 10 Flaws total. Includes Test Report and Certificate of Conformance. | 1 | |
| QXFD2PT008PQ04 | QX NO RADIO, DISPLAY, 20V PISTOL 8NM STANDARD, 1/4" QUICK CONNECT | 1 | |
| R&D-COND--STEEL-15-5 | BOEING STANDARD STEEL 15-5 | 1 | |
| R&D-COND-1-ABS-PLASTIC | BOEING STANDARD ABS PLASTIC | 1 | |
| R&D-COND-1-AL-2024-O | BOEING STANDARD AL 2024-O | 1 | |
| R&D-COND-1-AL-2024-T4(BARE) | BOEING STANDARD AL 2024-T4 BARE | 1 | |
| R&D-COND-1-AL-2024-T4(CLAD) | BOEING STANDARD AL 2024-T4 CLAD | 1 | |
| R&D-COND-1-AL-2024-T6X/T8X | BOEING STANDARD AL 2024-T6X/T8X | 1 | |
| R&D-COND-1-AL-2090-TX | BOEING STANDARD AL-2090-TX | 1 | |
| R&D-COND-1-AL-2219-T3 | BOEING STANDARD AL 2219-T3 | 1 | |
| R&D-COND-1-AL-6063-O | BOEING STANDARD AL 6063-O | 1 | |
| R&D-COND-1-COPPER | BOEING STANDARD COPPER | 1 | |
| R&D-COND-1-STEEL-15-5 | BOEING STANDARD STEEL 15-5 | 1 | |
| R&D-COND-1-STEEL-4340 | BOEING STANDARD STEEL 4340 | 1 | |
| R&D-COND-1-Ti-6AL-4V | BOEING STANDARD Ti-6AL-4V | 1 | |
| R&D-COND-2-2024-T4 (CLAD) | BOEING STANDARD 2024-T4 CLAD | 1 | |
| R&D-COND-2-2024-T4(BARE) | BOEING STANDARD AL 2024-T4 BARE | 1 | |
| R&D-COND-2-ABS-PLASTIC | BOEING STANDARD ABS PLASTIC | 1 | |
| R&D-COND-2-AL-2024-O | BOEING STANDARD AL 2024-O | 1 | |
| R&D-COND-2-AL-2024-T6X/T8X | BOEING STANDARD AL2024-T6X/T8X | 1 | |
| R&D-COND-2-AL-2090-TX | BOEING STANDARD AL 2090-TX | 1 | |
| R&D-COND-2-AL-2219-T3 | BOEING STANDARD AL-2219-T3 | 1 | |
| R&D-COND-2-AL-6063-O | BOEING STANDARD AL 6063-O | 1 | |
| R&D-COND-2-COPPER | BOEING STANDARD COPPER | 1 | |
| R&D-COND-2-STEEL-15-5 | BOEING STANDARD STEEL 15-5 | 1 | |
| R&D-COND-2-STEEL-4340 | BOEING STANDARD STEEL 4340 | 1 | |
| R&D-COND-2-Ti-6AL-4V | BOEING STANDARD Ti 6AL-4V | 1 | |
| R&D-COND-3-2024-T4(BARE) | BOEING STANDARD AL-2024-T4 BARE | 1 | |
| R&D-COND-3-ABS-PLASTIC | BOEING STANDARD ABS PLASTIC | 1 | |
| R&D-COND-3-AL-2024-O | BOEING STANDARD AL 2024-O | 1 | |
| R&D-COND-3-AL-2024-T4(CLAD) | BOEING STANDARD AL 2024-T4 CLAD | 1 | |
| R&D-COND-3-AL-2024-T6X/T8X | BOEING STANDARD AL 2024-T6X/T8X | 1 | |
| R&D-COND-3-AL-2090-TX | BOEING STANDARD AL 2090-TX | 1 | |
| R&D-COND-3-AL-2219-T3 | BOEING STANDARD AL 2219-T3 | 1 | |
| R&D-COND-3-AL-6063-O | BOEING STANDARD AL 6063-O | 1 | |
| R&D-COND-3-COPPER | BOEING STANDARD COPPER | 1 | |
| R&D-COND-3-STEEL-15-5 | BOEING STANDARD STEEL 15-5 | 1 | |
| R&D-COND-3-STEEL-4340 | BOEING STANDARD STEEL 4340 | 1 | |
| R&D-COND-3-Ti-6AL-4V | BOEING STANDARD Ti 6AL-4V | 1 | |
| R&D-COND-4-ABS-PLASTIC | BOEING STANDARD ABS PLASTIC | 1 | |
| R&D-COND-4-AL-2024-O | BOEING STANDARD AL 2024-O | 1 | |
| R&D-COND-4-AL-2024-T4(BARE) | BOEING STANDARD AL 2024-T4 BARE | 1 | |
| R&D-COND-4-AL-2024-T4(CLAD) | BOEING STANDARD AL 2024-T4 CLAD | 1 | |
| R&D-COND-4-AL-2024-T6X/T8X | BOEING STANDARD AL 2024-T6X/T8X | 1 | |
| R&D-COND-4-AL-2090-TX | BOEING STANDARD AL 2090TX | 1 | |
| R&D-COND-4-AL-2219-T3 | BOEING STANDARD AL 2219-T3 | 1 | |
| R&D-COND-4-AL-6063-O | BOEING STANDARD AL 6063-O | 1 | |
| R&D-COND-4-COPPER | BOEING STANDARD COPPER | 1 | |
| R&D-COND-4-STEEL-15-5 | BOEING STANDARD STEEL 15-5 | 1 | |
| R&D-COND-4-STEEL-4340 | BOEING STANDARD STEEL 4340 | 1 | |
| R&D-COND-4-Ti-6AL-4V | BOEING STANDARD Ti-6AL-4V | 1 | |
| R&D-SHEAR WAVE-EDGE-AL | BOEING STANDARD R&D SHEAR WAVE | 1 | |
| R&D-SHEAR WAVE-EDGE-TI | BOEING REFERENCE STANDARD R&D SHEAR WAVE EDGE | 1 | |
| R1011C | STANDARD LENGTH WRENCH | 3 | |
| R1012C | STANDARD LENGTH WRENCH | 1 | |
| R1214C | STANDARD LENGTH WRENCH | 4 | |
| R1618C | STANDARD LENGTH WRENCH | 5 | |
| R2022C | STANDARD LENGTH WRENCH | 4 | |
| R2024C | STANDARD LENGTH WRENCH | 1 | |
| R22-000 | BUBBLE COVER (STANDARD MODEL) | 1 | |
| R235 | 1/4" SOCKET BIT HOLDER WITH STANDARD RETAINING RING 1/4" SQUARE 1/4" FACOM | 1 | |
| R2426C | STANDARD LENGTH WRENCH | 2 | |
| R2428C | STANDARD LENGTH WRENCH | 2 | |
| R2830C | STANDARD LENGTH WRENCH | 2 | |
| R3032C | STANDARD LENGTH WRENCH | 1 | |
| R3436C | STANDARD LENGTH WRENCH | 1 | |
| R3840C | STANDARD LENGTH WRENCH | 1 | |
| R810C | STANDARD LENGTH WRENCH | 4 | |
| R857ELSV60 | BORESCOPE - RIGID (MEETS GENERAL ELECTRIC OR CFM STANDARD PRACTICES MANUAL SPECIFICATION SUCH AS: MODEL R857ELSV60) STD-10719 | 1 | |
| RAAU1A11 | C Clamp Locking Pliers With Standard Tip | 1 | |
| RADIUSED SHOE | Airbus Standard A340-500/-600 57-26-59-PB6 FIG. 57-26-59-991-003-A SHEET 01 PG. 15 | 1 | |
| RATCHET, SEALED HEAD (HIGH STRENGTH), STANDARD HANDLE, 4 7/16" | RATCHET, SEALED HEAD (HIGH STRENGTH), STANDARD HANDLE, 4 7/16" | 1 | |
| RBEM324U3010101 | STANDARD LANDING GEAR WHEEL REPLACEMENT DEVICE | 2 | |
| RBI8000T | HELIBOX TROLLEY CASE WITH TOOLS – IMPERIAL (SAE / STANDARD)/METRIC KIT, INCLUDES 236 TOOLS | 1 | |
| RBI9400T | MECHANIC HAND TROLLEY CASE WITH TOOLS – IMPERIAL (SAE / STANDARD) KIT (161 TOOLS) | 1 | |
| RBI9650TM | AVIONICS TOOL KIT– INCLUDES 266 IMPERIAL (SAE / STANDARD)/DMC TOOLS | 1 | |
| RBZ1214 | STANDARD O” OFFSET RATCHETING BOX WRENCH, 12 POINT 3/8-7/16” | 3 | |
| RC12-40M20-2024T3-194 | Countersink Standard, 12 Holes of 5/32" to 5/16" x 1/64" plus 3/8", .040" in CS and .020" midwall, 2024T3 Aluminum.... | 1 | |
| RC12-40M20-7075T6-194 | Countersink Standard, 12 Holes of 5/32" to 5/16" x 1/64" plus 3/8", .040" in CS and .020" midwall, 7075-T6 Aluminum.... | 1 | |
| RC14-VM650CIT-3A | Countersink Standard, 14 Holes, 7075T6 | 1 | |
| RC14-VM650CIT-3S | Countersink Standard, 14 Holes, 4340/4130 | 1 | |
| RC14-VM650CIT-3T | Countersink Standard, 14 Holes, 6ALV4 | 1 | |
| RC18-CS20-7075T6 | Countersink Standard, 18 Holes 1/8" to 1/2" x 1/32, 9/16, 5/8, 11/16, 3/4 and 7/8, .020 +/- .002 Deep notches on the CS, .008, .020, .040 surface notches, .005 +/- .001 wide notches, 3/8 thick 7075-T6 | 1 | |
| RCH3-T20-6AL4V | 3 hole countersink standard 7/32, 1/4, 9/32, .500 thick plate .020 deep notches on the CS and inside the hole, 6AL4V | 1 | |
| RCM12-40T40-7075T7 | Countersink Standard, 12 Holes of .125 - .75", .040" in CS and .040" thru, 7075-T7 Countersink Standard, 12 Holes of .125 - .75", .040" in CS and .040" thru, 7475-T6 Aluminum, 3 surface notches, .008", .020", .040"...... | 1 | |
| RD-KA5617-03 | STANDARD HS CRADLE | 1 | |
| RD11-01A | Douglas Standard, MD11 ALI SECTION2-1:PG1 FIG1.3 | 1 | |
| RD11-02 | Douglas Standard, MD11 ALI SECTION2-1:PG1 FIG1.6 | 1 | |
| RD11-03 | Douglas Standard, MD11 SECTION 2-1:PG1 FIG1.4 | 1 | |
| RD11815 | UT STANDARD | 1 | |
| RDP1.2-100H-7 | REFERENCE STANDARDS | 2 | |
| REBLING 7007 | STANDARD BATTERY DISCONNECT | 1 | |
| RH-.098-C2C3-2024T3 | Hole Standard, .098"Ø, Ø2.0" x .25" thick, .020"/.030" Corner Notch, 2024T3 | 1 | |
| RH-.125-C2C3-2024T3 | Hole Standard, .125"Ø, Ø2.0" x .25" thick, .020"/.030" Corner Notch, 2024T3 | 1 | |
| RH-.156-C2C3-2024T3 | Hole Standard, .156"Ø, Ø2.0" x .25" thick, .020"/.030" Corner Notch, 2024T3 | 1 | |
| RH-.187-C2C3-2024T3 | Hole Standard, .187"Ø, Ø2.0" x .25" thick, .020"/.030" Corner Notch, 2024T3 | 1 | |
| RH-.218-C2C3-2024T3 | Hole Standard, .218"Ø, Ø2.0" x .25" thick, .020"/.030" Corner Notch, 2024T3 | 1 | |
| RH-.250-C2C3-2024T3 | Hole Standard, .250"Ø, Ø2.0" x .25" thick, .020"/.030" Corner Notch, 2024T3 | 1 | |
| RH-.281-C2C3-2024T3 | Hole Standard, .281"Ø, Ø2.0" x .25" thick, .020"/.030" Corner Notch, 2024T3 | 1 | |
| RH-.312-C2C3-2024T3 | Hole Standard, .312"Ø, Ø2.0" x .25" thick, .020"/.030" Corner Notch, 2024T3 | 1 | |
| RH-.312-C30-7075T6 | Hole Standard, .312" (5/16")Ø, 2"sq x .25" thick, .030" corner notch, 7075T6 | 1 | |
| RH-.343-C2C3-2024T3 | Hole Standard, .343"Ø, Ø2.0" x .25" thick, .020"/.030" Corner Notch, 2024T3 | 1 | |
| RH-.375-C2C3-2024T3 | Hole Standard, .375"Ø, Ø2.0" x .25" thick, .020"/.030" Corner Notch, 2024T3 | 1 | |
| RH-.406-C2C3-2024T3 | Hole Standard, .406"Ø, Ø2.0" x .25" thick, .020"/.030" Corner Notch, 2024T3 | 1 | |
| RH-.437-C2C3-2024T3 | Hole Standard, .437"Ø, Ø2.0" x .25" thick, .020"/.030" Corner Notch, 2024T3 | 1 | |
| RH-.468-C2C3-2024T3 | Hole Standard, .468"Ø, Ø2.0" x .25" thick, .020"/.030" Corner Notch, 2024T3 | 1 | |
| RH-.500-C2C3-2024T3 | Hole Standard, .500"Ø, Ø2.0" x .25" thick, .020"/.030" Corner Notch, 2024T3 | 1 | |
| RH-.500-C50-6AL4V | Hole Standard, .500"Ø x .050" Corner notch, 6AL4V Titanium | 1 | |
| RH-.750-T20-2024T3 | Hole Standard, .750"Ø x .020" Thru notch, 2024T3 | 1 | |
| RH-.875-T20-7075T6 | Hole Standard, .875"Ø x .020" Thru notch, 7075T6 | 1 | |
| RH-1.0-T20-7075T6 | Hole Standard, 1.0"Ø x .020" Thru notch, 7075T6 | 1 | |
| RH-1.125-T20-7075T6 | Hole Standard, 1.125"Ø x .020" Thru notch, 7075T6 | 1 | |
| RH-4-37 | 4-37 Reference Standard, 7075-T6 Aluminum, per drawing | 1 | |
| RH-4.7MM-C40-7075-T7 | Hole Standard,4.7mmØ, 2 plate stack, 7mm thick (each plate), 14mm total thickness, 50mm long, .040"(1mmx1mm) corner notch, 7075T7, conductivity 42%IACS +or- 3% | 1 | |
| RH1-M20-7075T6-1 | 1 hole standard .700" diameter hole, 2" x 2" x .5" thick 7075-T6, .020 deep x .060 long midwall notch | 1 | |
| RH100-T20-2024T3 | 10 Hole Standard, 3/16" to 1.0", .020" thru notch, 2024T3 Aluminum | 1 | |
| RH100-T20-4340 | 10 Hole Standard, 3/16" to 1.0", .020" thru notch, 4340 Steel | 1 | |
| RH101-C30-2024T3 | 10 Hole Standard, 3/16" to 13/16, .030" Corner notche, 2024T3 | 1 | |
| RH101-T20-2024T3 | 10 Hole Standard, 3/16" to 13/16, .020" Thru notch, 2024T3 | 1 | |
| RH12-T40-7075T6 | CALIBRATION REFERENCE STANDARD (CRS), ALUMINUM ALLOY, CONDUCTIVITY VALUE OF 35% TO 45% IACS THAT CONTAINS VARIOUS HOLE SIZES WITH 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (TECHNA NDT OR EQUIVALENT) | 1 | |
| RH120-4130VM | Hole reference Standard, 4130 Steel, 3/16" to 3/4" | 1 | |
| RH120-6AL4V-VM-1 | Hole reference Standard, T6AL4V Steel, 3/16" to 3/4", ea. hold .020" deep x 0.004" +/- 0.002" wide edm thru notch | 1 | |
| RH120-C20-4340 | 12 Hole Reference Standard, 3/16" to 3/4", with .020" corner notch, 4340 Steel | 1 | |
| RH120-C30-2024T3 | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch, 2024-T3 Aluminum | 1 | |
| RH120-C30-4340 | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch, 4340 steel | 1 | |
| RH120-C30-7075T6 | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch, 7075T6 Aluminum | 1 | |
| RH120-C30-T6AL4V | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch, 6AL-4V Titanium | 1 | |
| RH120-C30M20-2024T3 | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch and .020 midwall notch, 2024-T3 Aluminum | 1 | |
| RH120-C30M20-304L | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch and .020 midwall notch, 304L | 1 | |
| RH120-C30M20-4130 | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch and .020 midwall notch, 4130 Steel | 1 | |
| RH120-C30M20-4340 | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch and .020 midwall notch, 4340 | 1 | |
| RH120-C30M20-7075T76 | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch and .020 midwall notch, 7075-T76 Aluminum | 1 | |
| RH120-C30M20-MAG | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch and .020 midwall notch, Magnesium | 1 | |
| RH120-C30M20-PH13-8MO | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch and .020 midwall notch, PH-13-8 MO | 1 | |
| RH120-C30M20-T6AL4V | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch and .020 midwall notch,T6AL4V Titanium | 1 | |
| RH120-C30M30-155PH | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch and .030 midwall notch, 15-5PH | 1 | |
| RH120-C30T20-7075T6 | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch and .020 thru notch, 7075T6 Aluminum | 1 | |
| RH120-C50-6AL4V | 12 Hole Reference Standard, 3/16" to 3/4", with .050" corner notch, 6AL-4V | 1 | |
| RH120-M20-4340 | 12 Hole Reference Standard, 3/16" to 3/4", with .020" midwall notch, 4340 | 1 | |
| RH120-M30-4340 | 12 Hole Reference Standard, 3/16" to 3/4", with .030" mid-wall notch, 4340 steel | 1 | |
| RH120-T20-7075T6-1 | 12 Hole Reference Standard, 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", .020" THRU NOTCHES 7075-T6 | 1 | |
| RH120-T20-T6AL4V | 12 Hole Reference Standard, 3/16" to 3/4", with .020" thru notch, 6AL-4V | 1 | |
| RH120-T40-7475T7 | 12 Hole Reference Standard, 3/16" to 3/4", with .040" thru notch, 7475T7 | 1 | |
| RH121-C30-155 | 12 Hole Reference Standard, 1/8" thru 3/4", w/.030" corner notches, 15-5PH | 1 | |
| RH121-C30-2024T3 | 12 Hole Reference Standard, 1/8" to 3/4", with .030" corner notch, 2024-T3 Aluminum | 1 | |
| RH121-C30-4340 | 12 Hole Reference Standard, 1/8" to 3/4", with .030" corner notch, 4340 Steel | 1 | |
| RH121-C30-7075T6 | 12 Hole Reference Standard, 1/8" to 3/4", with .030" corner notch, 7075-T6 Aluminum | 1 | |
| RH121-C30C20-7075T6 | 12 Hole Reference Standard, 1/8" to 3/4", with .030" corner notch & .020" corner notch, 7075-T6 Aluminum | 1 | |
| RH121-C30M20-155 | 12 Hole Reference Standard, 1/8" thru 3/4", w/.030" corner notches,.020" Midwall notches 15-5PH | 1 | |
| RH121-C30M20-2024T3 | 12 Hole Reference Standard, 1/8" thru 3/4", w/.030" corner notches,.020" Midwall notches, 2024-T3 | 1 | |
| RH121-C30M20-7075T6 | 12 Hole Reference Standard, 1/8" thru 3/4", w/.030" corner notches,.020" Midwall notches, 7075-T6 | 1 | |
| RH121-C30T20-7075T6 | 12 Hole Reference Standard, 1/8" thru 3/4", w/.030" corner notch, .020"thru notch, 7075-T6 | 1 | |
| RH121-C30T20-T6AL4V | 12 Hole Reference Standard, 1/8" thru 3/4", w/.030" corner notch, .020"thru notch, T6AL4V | 1 | |
| RH121-C50-T6AL4V | 12 Hole Reference Standard, 1/8" to 3/4", with .050" corner notch, 6AL4V Titanium | 1 | |
| RH121-M20-4340 | 12 Hole Reference Standard, 1/8" to 3/4", with .020" Mid Wall notch, 4340 Steel | 1 | |
| RH121-M20-7075T6 | 12 Hole Reference Standard, 1/8" to 3/4", with .020" Mid Wall notch, 7075-T6 Aluminum | 1 | |
| RH121-M20-T6AL4V | 12 Hole Reference Standard, 1/8" to 3/4", with .020" Mid Wall notch, 6AL4V Titanium | 1 | |
| RH121-T40-7475T7 | 12 Hole Reference Standard, 1/8" to 3/4", 7475-T7 alum, IACS 39%-45%, .040" THRU NOTCHES | 1 | |
| RH122-T20-2024T3 | 12 Hole Reference Standard, 5/32" to 13/16", with .020" thru notch, 2024-T3 Aluminum | 1 | |
| RH122-T40-7075T6 | 12 Hole Reference Standard, 5/32" to 13/16", with .040" thru notch, 7075-T6 Aluminum | 1 | |
| RH123-C30-2024T3 | 12 hole calibration standard, .030 Corner notches, 3/16" (.187) to 25/64" (.390), 2024T3 Aluminum | 1 | |
| RH13-M20-2024T3 | 13 Hole Reference Standard, Midwall Notch, 2024-T3 AL holes sizes 1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1.0 | 1 | |
| RH13-M40-2024T3 | 13 Hole Reference Standard, Midwall Notch, 2024-T3 AL holes sizes 1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1.0 | 1 | |
| RH13-T20-2024T3 | 13 Hole Reference Standard, Thru Notch, 2024-T3 AL | 1 | |
| RH13-T20-304 | 13 Hole Reference Standard, 5/32" thru 9/16" with 0.20" thru, 304 .. | 1 | |
| RH13-T20-4340 | 13 Hole Reference Standard, 5/32" thru 9/16" with 0.20" thru, 4340 | 1 | |
| RH13-T20-7075T6 | 13 hole reference standard, hole sizes 5/32" thru 9/16" with 0.20" thru 7075T6 | 1 | |
| RH13-T20-T6AL4V | 13 Hole Reference Standard, 5/32" thru 9/16" with 0.20" thru T6AL4V Ti. | 1 | |
| RH131-C30-T6AL4V | 13 Hole Standard, 1/8" to 1/2" x 1/32" w/ .030" corner notch, Titanium, w/ .020" surface notch | 1 | |
| RH141-T20-7075T6 | 14 Hole Reference Standard, 1/8" to 3/4, .020 thru notch, 7075-T6 | 1 | |
| RH141-T20-T6AL4V | 14 Hole Standard, 1/8" to 3/4" w/ .020" thru notch, Titanium | 1 | |
| RH150-C20-7075T6 | 15 Hole Standard, 1/8" to 1.0" x 1/16" w/ .020" corner notch, 7075-T6 Alum, w/ certs | 1 | |
| RH150-C20C20-15-5PH-1 | 15 Hole Standard, 1/8" to 1.0" x 1/16" w/ (2) .020" corner notches on in each hole, .205" thick 15-5PH , w/ certs | 1 | |
| RH150-C20C20-6AL4V-1 | 15 Hole Standard, 1/8" to 1.0" x 1/16" w/ (2) .020" corner notches on in each hole, .205" thick 6AL-4V , w/ certs | 1 | |
| RH150-C20C20-7050T7-1 | 15 Hole Standard, 1/8" to 1.0" x 1/16" w/ (2) .020" corner notches on in each hole, .205" thick 7050-T7 Alum, w/ certs | 1 | |
| RH150-C30T40-7075T6 | 15 Hole Standard, 1/8" to 1.0" x 1/16" w/ .040" thru notch and .030 corner notch, 7075-T6 Alum, w/ certs | 1 | |
| RH152-C30C20-7075T6 | 15 Hole Standard, 1/8", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64",w/ .030" & .020" corner notch, 7075-T6 Alum, w/ certs | 1 | |
| RH153-T20-4340 | 15 Hole Standard, 4.8, 5.1, 5.5, 6.3, 6.7, 7.1, 7.9, 8.3, 8.7, 9.5, 9.9, 10.3, 11.1, 11.5, 11.9 mm holes, .5mm thru notches, 4340 | 1 | |
| RH18-M20-7075T6 | 18 Hole Standard, 3, 4, 4.8, 5.2, 5.7, 6.4, 6.7, 7.1, 7.9, 8.3, 8.7, 9.5, 9.9, 10.3, 11.1, 11.5, 11.9 and 12.7mm Hole, .020 Deep x .040 Long Midwall Notches, 7075-T6 | 1 | |
| RH18-T20-2024T3 | 18 hole standard 5/16, 11/32, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 19/32, 5/8, 21/32, 11/16, 23/32, 3/4, 25/32, 13/16, 7/8, 15/16 with .020 thru notches, 2024T3 Aluminum | 1 | |
| RH18.75-T20-7075T6 | 18 hole standard 5/16, 11/32, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 19/32, 5/8, 21/32, 11/16, 23/32, 3/4, 25/32, 13/16, 7/8, 15/16 with .020 +/- .002 thru notches .004 +/- .002 wide notches, 7075-T6 Aluminum .75" thick plate | 1 | |
| RH20-C30-2024T3 | 2 Hole Standard, 2024T3 Alum w/ .250" and .375" Holes and .030" corner notch | 1 | |
| RH20-C30-304L | 2 Hole Standard,304 Alum w/ .250" and .375" Holes and .030" corner notch | 1 | |
| RH20-T20-7075T6 | 20 Hole Calibration Standard, Thru Notches 7075T6 | 1 | |
| RH200-C30-304L | 20 Hole Reference Standard, 1/8" Thru 3/4", w/.030" Cornor Notch, 304L Stainless | 1 | |
| RH200-C30-7075T6 | 20 Hole Reference Standard, 1/8" Thru 3/4", w/.030" Corner Notch, 7075T6 | 1 | |
| RH200-C30M20-2024T3 | 20 Hole Reference Standard, 1/8" Thru 3/4", w/.030" Corner Notches and .020" Midwall, 2024-T3 | 1 | |
| RH200-C50-T6AL4V | 20 Hole Reference Standard, 1/8" Thru 3/4", w/.050" Corner Notch, 6AL-4V | 1 | |
| RH200-T20-7075T6 | 20 Hole Reference Standard, 1/8" thru 3/4", w/.030" thru Notch, 7075T6 | 1 | |
| RH22-T20-155 | 2 Hole Standard, 15-5 Stainless, .189" diam. hole & .205" diam hole | 1 | |
| RH240-C30M20T20-7075T6 | 24 hole calibration standard, 3/4" - 1 1/2" holes. 030" corner notches, .020 midwall notch, .020" thru-wall, 3 plate stack, 7075T6 | 1 | |
| RH290-C3-304 | 29 hole calibration standard, 1/8" to 1.0", .030" corner notches, per Boeing PT6 51-00-00 FIG16, Stainless Steel | 1 | |
| RH290-C3-T6AL4V | 29 hole calibration standard, 1/8" to 1.0", .030" corner notches, per Boeing PT6 51-00-00 FIG16, Titanium | 1 | |
| RH290-C30-2024T3 | 29 hole calibration standard, 1/8" to 1.0", .030" corner notches, per Boeing PT6 51-00-00 FIG16 | 1 | |
| RH290-C3C2-2024T3 | 29 hole calibration standard, 1/8" to 1.0", .030" & .020" corner notches, per Boeing PT6 51-00-00 FIG16 | 1 | |
| RH290-C50-T6AL4V | 29 hole calibration standard, 1/8" to 1.0", .050" corner notches, per Boeing PT6 51-00-00 FIG16, Titanium | 1 | |
| RH290-M30-7075T6 | 29 hole calibration standard, 1/8" to 1.0", .030" deep midwall notches .100 long | 1 | |
| RH3-C30-304 | 3 hole standard .875,1.0 and 1.125 inch holes .250 thick plate .030 x .030 corner notch..304 | 1 | |
| RH3-C30-4340 | 3 hole standard .875,1.0 and 1.125 inch holes .250 thick plate .030x.030 corner notch..4340 | 1 | |
| RH3-C30-6AL4V | 3 hole standard .875,1.0 and 1.125 inch holes .250 thick plate .030x.030 corner notch..6AL4V | 1 | |
| RH3-C30-7075T6 | 3 hole standard 1.0 1.125 and 1.5 inch holes .250 thick plate .030x.030 corner notch | 1 | |
| RH3-T30-304 | 3 hole standard .875,1.0 and 1.125 inch holes .250 thick plate .030 thru notch..304 | 1 | |
| RH3-T30-4340 | 3 hole standard .875,1.0 and 1.125 inch holes .250 thick plate .030 thru notch..4340 | 1 | |
| RH3-T30-7075T6 | 3 hole standard .875,1.0 and 1.125 inch holes .250 thick plate .030 thru notch..7075T6 | 1 | |
| RH40-T20C30-2024T3 | 4 Hole Standard, 1.0", 1.125", 1.187" and 1.5" holes with .030" corner notch and .020 thru notch, 2024T3 aluminum | 1 | |
| RH41-M20-7075T7 | 4 Hole Standard, Hole diameters; .203", .437" .562", & .625", 7075-T7 (32-42 IACS) or other AL that meets IACS Value, Midwall Notch; .020" x .060"L x .004"WLenth | 1 | |
| RH42-M16-6AL4V | 4 Hole Standard, 16mm, 30mm, 60mm, 65mm, .4mm Long X .2mm Deep Midwall Notches, 12mm thick 6AL-4V | 1 | |
| RH50-C30-4340 | 5 Hole Standard, 1", 1.125", 1.25", 1.375", 1.50" .030 Corner, 4340 Steel, Per 747, 51-00-00, FiG19, PG10 | 1 | |
| RH50-C30-7075T6 | Holes Standard 7/16in,1/2in,9/16in,3/4in,1.0in,.030 corner notch | 1 | |
| RH50-C30C20-7075T6 | 5 Hole Standard, 1", 1.125", 1.25", 1.375", 1.50" .030 Corner and .020 corner, 7075T6 Aluminum, Per 747, 51-00-00, FiG16, PG10 | 1 | |
| RH53-T20-7075T6 | 5 Hole Standard, .098", .128", .161", .193", .228", .020 thru notch, 7075T6 aluminum | 1 | |
| RH55-C3M2/3-177PH | 5 Hole Standard, .930, 1.00, 1.250, 1.500, 2.375, .030 Corner and .020 x .030 Midwall, 17-7PH | 1 | |
| RH55-C3M2/3-4340 | 5 Hole Standard, .930, 1.00, 1.250, 1.500, 2.375, .030 Corner and .020 x .030 Midwall, 4340 Steel | 1 | |
| RH55-C3M2/3-7075T6 | 5 Hole Standard, .930, 1.00, 1.250, 1.500, 2.375, .030 Corner and .020 x .030 Midwall, 7075T6 Aluminum | 1 | |
| RH57-C30-7075T6 | 5 Hole Standard,7/16", 1/2", 9/16", 3/4", 1", .030" corner notch | 1 | |
| RH58-C30-4340 | 5 Hole Standard, .250", .281", .312", .343", .375" Holes, .030" Corner Notch | 1 | |
| RH6-C30-4340 | 6 Hole Standard, 3/4", 13/16", 7/8", 15/16", 1.0", 1 1/8" .030 Corner, 4340 Steel, | 1 | |
| RH7-C30T20-T6AL4V | Hole Reference Standard, 7 holes, 5/32” thru 1/2” w/ .020” thru-wall notches, .030" Corner, Titanium | 1 | |
| RH7-T20-T6AL4V | Hole Reference Standard, 7 holes, 5/32” thru 1/2” w/ .020” thru-wall notches, Titanium | 1 | |
| RH70-C30T20-2024T3 | Hole Reference Standard, 7 holes, 5/32” thru 1/2” w/ .020” thru-wall notches, .030" Corner, 2024-T3 | 1 | |
| RH70-T20-177 | Hole Reference Standard, 7 holes, 5/32” thru 1/2” w/ .020” thru-wall notches, 17-7PH Stainless | 1 | |
| RH70-T20-2024T3 | Hole Reference Standard, 7 holes, 5/32” thru 1/2” w/ .020” thru-wall notches, Aluminum | 1 | |
| RH70-T20-7075T6 | Hole Reference Standard, 7 holes, 5/32” thru 1/2” w/ .020” thru-wall notches, Aluminum | 1 | |
| RH70-T20-T6AL4V | Hole Reference Standard, 7 holes, 5/32” thru 1/2” w/ .020” thru-wall notches, Titanium | 1 | |
| RH71-C30C20-7075T6 | 5 Hole Standard, .156", .187", .250", .312", .375", .437, .500"" .030 Corner and .020 corner,.005" width, .030 lendth, 7075T6 Aluminum | 1 | |
| RH71-T20-T6AL4V | Hole Reference Standard, 7 holes, 1/8",5/32,3/16,7/32,1/4,9/32,5/16" w/ .020” thru-wall notches, Titanium | 1 | |
| RH73-C20C30-4340 | Multi Hole Reference Standard,.188, .250, .313, .375, .438, .500, .875", .030" Corner and .020" Corner (opposite side), 4340 Steel | 1 | |
| RH73-C20C30-7075T6 | Multi Hole Reference Standard,.188, .250, .313, .375, .438, .500, .875", .030" Corner and .020" Corner (opposite side), 7075-T6 Aluminum | 1 | |
| RH8-C30-2024 | STANDARD FOR OPEN HOPE INSPECTION | 1 | |
| RH80-C30-2024T3 | 8 hole calibration standard, 1/8" thru 1/2", .030" corner notches, 2024-T3 | 1 | |
| RH80-C30-7075T6 | 8 hole calibration standard, 1/8" thru 1/2", .030" corner notches, 7075-T6 | 1 | |
| RH80-C30-7475T6 | 8 Hole calibration Standard 1/8 5/32 3/16 7/32 1/4 5/16 3/8 1/2 corner notch 0.30" | 1 | |
| RH80-C30M20-304L | 8 hole calibration standard, 1/8" thru 1/2", .030" corner notches, .020 midwall notch, 304L | 1 | |
| RH80-C30M20-7075T6 | 8 hole calibration standard, 1/8" thru 1/2", .030" corner notches, .020 midwall notch, 7075T6 | 1 | |
| RH80-C30M20-T6AL4V | 8 hole calibration standard, 1/8" thru 1/2", .030" corner notches, .020 midwall notch, T6AL4V Titanium | 1 | |
| RH80-M30-7075T6 | 8 hole calibration standard, .030 midwall notch, 7075T6 | 1 | |
| RH80-M30-T6AL4V | 8 hole calibration standard, 1/8" thru 1/2", .030 midwall notch x .100 Long, T6AL4V Titanium | 1 | |
| RH80-T20-2024T3 | 8 hole calibration standard, 1/8" thru 1/2", .020" Thru notches, 2024-T3 | 1 | |
| RH80-T20-7075T6 | 8 Hole Calibration Standard, 1/8" Thru 1/2", .020" Thru notches, 7075T6 | 1 | |
| RH80-T20-T6AL4V | 8 hole calibration standard, 1/8" thru 1/2", .020" Thru notches, T6AL4V | 1 | |
| RH81-C30-7075T6 | 8 hole calibration standard, .625" thru 1.5", increments of .125", .030" corner notches, 7075-T6 | 1 | |
| RH81-C30T20-155 | 8 hole calibration standard, .156" thru .562", .030" corner notches, .020 thru notch, 155SS | 1 | |
| RH81-C30T20-4130 | 8 hole calibration standard, .156" thru .562", .030" corner notches, .020 thru notch, 4130 | 1 | |
| RH83-T20-7075T6 | 8 Hole Standard, .098", .128", .161", .193", .228",250", 312", 375" .020 thru notch, 7075T6 aluminum | 1 | |
| RH84-M30-7075T6 | 8 hole calibration standard, .030 midwall notch, 7075T6, 4.8mm, 6.35mm, 7.9mm, 9.5mm, 11.1mm, 12.7mm, 13.5mm, 14.29mm | 1 | |
| RH85-M30-7075T6 | 8 hole calibration standard, .030 midwall notch, 7075T6, 5mm, 6mm, 7mm, 8.15mm, 9.42mm, 11mm, 12.6mm, 14mm | 1 | |
| RH86-M30-7075T6-MM | 8 hole calibration standard, .030 midwall notch, 7075T6, Hole Sizes; 3.5mm, 5mm, 6mm, 7mm, 8mm, 10mm, 11mm, 15mm, Dimensions of Std. 3" x 6" | 1 | |
| RH87-C30T20-7075T6 | 8 hole calibration standard, .030 corner notch, .020 thru notch, 7075T6, Hole Sizes; .312 - .750, 1/16" increments | 1 | |
| RKC4101-12 | RETENTION GROOVE CUTTING TOOL STANDARD, 1/2 AND FI | 3 | |
| RKC4101−12 | RETENTION GROOVE CUTTING TOOL STANDARD, 1/2 AND FIRST OVERSIZE | 3 | |
| RKC7135 | RETENTION GROOVE CUTTING TOOLS STANDARD AND FIRST OVERSIZE | 1 | |
| RKC7155 | RETENTION GROOVE CUTTING TOOLS STANDARD AND FIRST OVERSIZE | 1 | |
| RLP-VMM3RS-1.0 | Reference Standard | 1 | |
| RLP-VMS3RS-1.0 | Reference Standard | 1 | |
| RLP-VMSS3RS-1.0 | Reference Standard | 1 | |
| RLP-VMT3RS-1.0 | Reference Standard | 1 | |
| RM100-C30-2024T3 | 10 Hole Standard, 3/16" to 1.0", .030" corner notch, 3 surface notch, 2024T3 Aluminum | 1 | |
| RM100-C30T20-2024T3 | 10 Hole Standard, 3/16" to 1.0", .030" corner notch.020" through notch, 3 surface notch, 2024T3 Aluminum | 1 | |
| RM101-C30-2024T3 | 10 Hole Multi Purpose Standard, 1/8 to 1/2" x 1/16" + 9/16, 5/8, & 3/4", .030 Corner notches and 0.010, .020 & .040" surface notches, 2024-T3 | 1 | |
| RM101-C30-304 | STAINLESS STEEL BOLTHOLE REFERANCE STANDARD | 1 | |
| RM101-C30-7075T7 | 10 Hole Multi Purpose Standard, 1/8 to 1/2" x 1/16" + 9/16, 5/8, & 3/4", .030 Corner notches and 0.010, .020 & .040" surface notches, 7075-T73 | 1 | |
| RM110-C30M20-T6AL4V-1 | 11 hole calibration standard, .125, .187, .25, .312, .375, .437, .50, .562, .625, .687, .75 , T6AL4V, .030 Corner, .020 Midwall and .040, .020, .008 surface notches | 1 | |
| RM120-C20-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" corner, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM120-C30-2024T3 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 2024-T3 | 1 | |
| RM120-C30-2024T3-1 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 010", .020", .040" surface notches 2024-T3 | 1 | |
| RM120-C30-304 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 304 Stainless | 1 | |
| RM120-C30-304-1 | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 304 STAINLESS STEEL, 12 HOLES 3/16” TO ¾” DIAMETERS, EACH HOLE CONTAINS A .030” X .030” CORNER EDM NOTCH, THREE SURFACE NOTCHES - .010”, .020” & .040” DEEP X ¾” LONG | 1 | |
| RM120-C30-4340 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 4340 Steel | 1 | |
| RM120-C30-4340-1 | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 4130 STEEL, 12 HOLES 3/16” TO ¾” DIAMETERS, EACH HOLE CONTAINS A .030” X .030” CORNER EDM NOTCH, THREE SURFACE NOTCHES - .010”, .020” & .040” DEEP X ¾” LONG | 1 | |
| RM120-C30-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM120-C30-7075T6-1 | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 7075-T6 ALUMINUM, 12 HOLES 3/16” TO ¾” DIAMETERS, EACH HOLE CONTAINS A .030” X .030” CORNER EDM NOTCH, THREE SURFACE NOTCHES - .010”, .020” & .040” DEEP X ¾” LONG | 1 | |
| RM120-C30-T6AL4V | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 6AL4V | 1 | |
| RM120-C30C20-2024T3 | 12 hole calibration standard, .030" corner notches, 3/16" to 3/4", 2024T3 Aluminum“2 corner notches 180 deg apart. 0.030’” upper surface and 0.020” on lower surface | 1 | |
| RM120-C30C20-T6AL4V | 12 hole calibration standard, .030" corner notches, 3/16" to 3/4", T6AL4V TI 2 corner notches 180 deg apart. 0.030’” upper surface and 0.020” on lower surface | 1 | |
| RM120-C30M20-2024T3 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" Midwall & .030" corner, 008", .020", .040" surface notches 2024T3 | 1 | |
| RM120-C30M20-4340 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" midwall & .030" corner, 008", .020", .040" surface notches 4340 | 1 | |
| RM120-C30M20-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" midwall & .030" corner, 008", .020", .040" surface notches 4340 | 1 | |
| RM120-C30T20-2024T3 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 2024T3 | 1 | |
| RM120-C30T20-2024T3-1 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 010", .020", .040" surface notches 2024T3 | 1 | |
| RM120-C30T20-2024T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 2024T6 | 1 | |
| RM120-C30T20-304 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 304 SS | 1 | |
| RM120-C30T20-304L | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 304L | 1 | |
| RM120-C30T20-4130 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 4130 | 1 | |
| RM120-C30T20-4340 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 4340 | 1 | |
| RM120-C30T20-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM120-C30T20-7075T6-1 | 12 HOLE STANDARD - HOLE SIZES; 3/16 INCH (4.74MM) 7/32 INCH (5.53MM) 1/4 INCH (6.35MM) 9/32 INCH (7.13MM) 5/16 INCH (7.92MM) 11/32 INCH (8.71MM) 3/8 INCH (9.52MM) 7/16 INCH (11.09MM) 1/2 INCH (12.7MM) 9/16 INCH (14.27MM) 5/8 INCH (15.87MM) 3/4 INCH (19.05 | 1 | |
| RM120-C30T20-MAG | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches Magnesium | 1 | |
| RM120-C30T20-T6AL4V | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 6AL4V | 1 | |
| RM120-C30T30-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" thru notches & .030" corner, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM120-C40T20-2024T3 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .040" corner, 008", .020", .040" surface notches 2024T3 | 1 | |
| RM120-C40T20-T6AL4V | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .040" corner, 008", .020", .040" surface notches 6AL4V | 1 | |
| RM120-T20-4130 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches, 008", .020", .040" surface notches 4130 | 1 | |
| RM120-T20-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" Thru, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM120-T20-I625 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches, 008", .020", .040" surface notches Inconel 625 | 1 | |
| RM120-T20-T6AL4V | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches, 008", .020", .040" surface notches 6AL-4V | 1 | |
| RM120-T40-T6AL4V | 12 hole calibration standard, 3/16" to 3/4" holes, .040" thru notches, 008", .020", .040" surface notches 6AL-4V | 1 | |
| RM121-C30-4130 | 12 hole calibration standard, .030" corner & .010", .020", .040" surface notches, 1/8" to 3/4", .125”,.156”, .187 ", .250”, .312”, .375”, .437”, .500”, .562”, .625”, .687”, .750”, 4130 Steel | 1 | |
| RM121-C30-7075T6 | 12 hole calibration standard, 1/8" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM121-C30-T6AL4V | 12 hole calibration standard, 1/8" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 6AL4V | 1 | |
| RM121-C30T20-4340 | 12 Hole Reference Standard, 1/8" thru 3/4", w/.030" corner notch, .020"thru notch, 008", .020", .040", 4340 | 1 | |
| RM121-C30T20-6AL4V | 12 Hole Reference Standard, 1/8" thru 3/4", w/.030" corner notch, .020"thru notch, 008", .020", .040", 6AL-4V | 1 | |
| RM121-C30T20-7075T6 | 12 Hole Reference Standard, 1/8" thru 3/4", w/.030" corner notch, .020"thru notch, 008", .020", .040", 7075-T6 | 1 | |
| RM122-C30-2024T3 | 12 hole calibration standard, .030" corner notches, 1/8" to 13/16", 008", .020", .040" surface notches, 2024T3 Alum | 1 | |
| RM122-C30-4130 | 12 hole calibration standard, .030" corner notches, 1/8" to 13/16", 008", .020", .040" surface notches, 4130 Steel | 1 | |
| RM122-C30-7075T6 | 12 hole calibration standard, .030" corner notches, 1/8" to 13/16", 008", .020", .040" surface notches, 7075-T6 | 1 | |
| RM123-C30-2024T3 | 12 hole calibration standard, .030 Corner notches, 3/16" (.187) to 25/64" (.390), 008", .020", .040" surface notches, 2024T3 Aluminum | 1 | |
| RM130-C30M20-T6AL4V | 13 hole Titanium calibration standard, .030" corner, .020 midwall notches ,5/32" to 3/4" holes .005, .010 and .040 surface notches *similar to 23-55* | 1 | |
| RM14-C30M20-2024T3 | Multi-use standard, 14 holes, .030" corner notches, .020" midwall notches, .008", .020", .040" surface notches | 1 | |
| RM140-C50-6AL4V | Multi Purpose Standard (6AL4V Titanium), 1/8" to 3/8" x 1/32" & 7/16", 1/2", 9/16", 5/8", 3/4" w/.050" Corner + 3 Surface Notches | 1 | |
| RM140-C50-7075T6 | Multi Purpose Standard (7075-T6 Aluminum), 1/8" to 3/8" x 1/32" & 7/16", 1/2", 9/16", 5/8", 3/4" w/.050" Corner + 3 Surface Notches | 1 | |
| RM140-C50-AS4340 | Multi Purpose Standard (6AL4V Titanium), 1/8" to 3/8" x 1/32" & 7/16", 1/2", 9/16", 5/8", 3/4" w/.050" Corner + 3 Surface Notches | 1 | |
| RM140-T40-4340 | Multi Purpose Standard (4340 Steel), 1/8" to 3/8" x 1/32" & 7/16", 1/2", 9/16", 5/8", 3/4" w/.040" Thru + 3 Surface Notches | 1 | |
| RM150 | ALUMINUM REFERENCE STANDARD | 1 | |
| RM150-C20C30-2024T6 | 15 hole standard .020 comer notch for top top row of holes .030 corner notch for bottom row 2024T6 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1.0 | 1 | |
| RM150-C20C30-4340 | 15 hole standard .020 comer notch for top top row of holes .030 corner notch for bottom row 4340 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1.0 | 1 | |
| RM150-C20C30-6AL4V | 15 hole standard .020 comer notch for top top row of holes .030 corner notch for bottom row 6AL4V TI 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1.0 | 1 | |
| RM150-C30-2024T3 | ALUMINUM REFERENCE STANDARD | 1 | |
| RM150-C50-2024T3 | REFERENCE STANDARD | 1 | |
| RM150-T20-2024T3 | 15 Hole Standard, .020" thru notch, 2024T3 Aluminum | 1 | |
| RM17-C23-2024T3 | Special Boeing Type Reference Standard, per PT6 51-00-00 Fig 16, | 1 | |
| RM171-T40-303 | Hole Standard, 1/8"-1/2"x1/32", 9/16"-3/4"x1/16", .040" thru notch, 303SS w/ 8, 10, 20, 30 and 50 deep surface notches | 1 | |
| RM171-T40-4130 | Hole Standard, 1/8"-1/2"x1/32", 9/16"-3/4"x1/16", .040" thru notch, 4130ST w/ 8, 10, 20, 30 and 50 deep surface notches | 1 | |
| RM171-T40-7075T6 | Hole Standard, 1/8"-1/2"x1/32", 9/16"-3/4"x1/16", .040" thru notch, 7075T6AL w/ 8, 10, 20, 30 and 50 deep surface notches | 1 | |
| RM200-C20T20-T6AL4V | 20 Hole Reference Standard, 1/8" Thru 3/4", w/20" Cornor Notch, w/ .20" Thru Notch, T6AL4V, Plus .008", .020" & .040" surface notches | 1 | |
| RM200-C30-304L | 20 Hole Calibration Standard, 1/8"-3/4"Ø, .030 Corner, 304L SS, with .008, .020, .040 Surface Notches | 1 | |
| RM200-T40-T6AL4V | 20 Hole Calibration Standard, 1/8"-3/4"Ø, .040 Thru Wall, T6AL4V Titanium, with .008, .020, .040 Surface Notches | 1 | |
| RM290-C30-2024T3 | HOLE STANDARD | 1 | |
| RM290-C30-7075T6 | Reference Standard, 29 Holes 1/8" thru 1" in 1/32" increments with .030" corner notch plus 3 surface notch | 1 | |
| RM290-C30T20-2024T3 | Multi Purpose Standard, Aluminum, 1/8" to 1" x 1/32" w/ .020 Thru and .030 Corner Notch + 3 Surface Notches | 1 | |
| RM290-C30T20-4340 | Multi Purpose Standard, Steel, 1/8" to 1" x 1/32" w/ .020 Thru and .030 Corner Notch + 3 Surface Notches | 1 | |
| RM290-T20-2014T6 | multi-hole reference standard 29 holes 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 19/32, 5/8, 31/32, 11/16, 23/32, 3/4, 25/32, 13/16, 27/32, 7/8, 29/32 15/16, 31/32 0.020 deep through notch 3 surface flaws... | 1 | |
| RM30-T2-2024T3 | Multi-Purpose Hole Standard, 5/32", 1/4", 3/8" with thruwall .020" notch, 2024T3 | 1 | |
| RM50-C30-2024T3 | Multi Purpose 5 Hole Standard, 1/8" to 1/4" x 1/32", .030" Corner notch | 1 | |
| RM51-T20-7050-T7 | Multi-Purpose Hole Standard, 5 Holes, .090", .100", .110", .125, and .156", and .010", .020", .040" surface notches | 1 | |
| RM52-C30-2024T3 | Multi Purpose 5 Hole Standard, 1/2" , 7/15", 9/16", 3/4", 1" with .030" corner, .010, .020, and .040 surface notches 2024-T3 | 1 | |
| RM6-C40T20-2024T3 | 6 hole calibration standard,( 0.75",1.0", 1.250" , 1.5" , 1.750" , 2.0"..holes, .020" thru notches & .040" corner,..008", .020", .040" surface notches 2024T3 | 1 | |
| RM6-C40T20-T6AL4V | 6 hole calibration standard,( 0.75",1.0", 1.250" , 1.5" , 1.750" , 2.0"..holes, .020" thru notches & .040" corner,..008", .020", .040" surface notches T6AL4V | 1 | |
| RM80-C30-T6AL4V | 8 Hole Standard, .125" thru .500", 6AL4V Titanium, .030" Corner notch w/ .010", .020" and .040" surface notches | 1 | |
| RM80-C30T20-2024T3 | 8 Hole Standard, .125" thru .500", 2024-T3 Aluminum, .030" Corner, .020 thru notch w/ .010", .020" and .040" surface notches | 1 | |
| RM80-C30T20-304 | 8 Hole Standard, .125" thru .500", 304 Stainless Steel, .030" Corner, .020 thru notch w/ .010", .020" and .040" surface notches | 1 | |
| RM80-C30T20-4140 | 8 Hole Standard, .125" thru .500", 4140 Steel, .030" Corner, .020 thru notch w/ .010", .020" and .040" surface notches | 1 | |
| RM80-C30T20-4340 | 8 Hole Standard, .125" thru .500", 4340 Steel, .030" Corner, .020 thru notch w/ .010", .020" and .040" surface notches | 1 | |
| RM80-C30T20-7075T6 | 8 Hole Standard, .125" thru .500", 7075-T6 Aluminum, .030" Corner, .020 thru notch w/ .010", .020" and .040" surface notches | 1 | |
| RM80-C30T20-T6AL4V | 8 Hole Standard, .125" thru .500", 6AL-4V Titanium, .030" Corner, .020 thru notch w/ .010", .020" and .040" surface notches | 1 | |
| RM80-C50-T6AL4V | 8 Hole Standard, .125" thru .500", 6AL4V Titanium, .050" Corner notch w/ .010", .020" and .040" surface notches | 1 | |
| RM80-T20-2024T3 | 8 Hole Standard, .125" thru .500", 2024T3 Alum, .020" Thru notch w/ .010", .020" and .040" surface notches | 1 | |
| RM82-T20-2024T3 | 8 Hole Standard, 1/8 thru 11/32 hole dia., 2024T3 Alum, .020" Thru notch w/ .010", .020" and .040" surface notches | 1 | |
| RM87-C30-2024T3 | Hole Standard, 1/8" to 9/16 x 1/16" Inc. with .030" corner notch and 0824 surface notches | 1 | |
| RM87-C30M20-2024T3 | Hole Standard, 1/8" to 9/16 x 1/16" Inc. with .030" corner notch and 0824 surface notches,.020" Midwall Notches, Aluminum | 1 | |
| RO2512-50SNP | SIOUX Signature Series Random Orbital Sander - 5" Pad / Standard Orbit | 1 | |
| RO2512-60SNP | SIOUX Signature Series Random Orbital Sander - 6" Pad / Standard Orbit | 2 | |
| ROLLS | STANDARDS MATERIAL FOR BORESCOPE | 1 | |
| ROLLS ROYCE | STANDARDS MATERIAL FOR BORESCOPE | 1 | |
| ROMPAS | REFERENCE STANDARD ALUMINIUM 7075 T6-CONF ASTM E164 | 1 | |
| RRT048964 | ASSEMBLY TOOL (FOR SB 72-G262 STANDARD QUILL SHAFT) | 1 | |
| RRT062470 | WORKING STANDARD TUBE | 1 | |
| RRT115162 | WORKING STANDARD | 1 | |
| RS-0123-2024T3 | Surface Reference Standard .10" .020" .030" long 2024T3 | 1 | |
| RS-0123-7075T6 | Surface Reference Standard .010" .020" .030" long 7075T6 | 1 | |
| RS-502 | ASTRA G100 REFERENCE STANDARD, PG.613: 04-00-00 FIG.605 | 1 | |
| RS-502-C | ASTRA G100 REFERENCE STANDARD, 2 EDM FATIGUE CRACKS 2.4mm X 1.2mm (PG.613: 04-00-00 FIG.605) | 1 | |
| RS02051M-15-SHP | Surface Standard with .2, .5, 1mm Notches, 15-SHP Stainless, 100x50x10MM | 1 | |
| RS02051M-2024T3 | Surface Standard with .2, .5, 1mm Notches, 2024T3 | 1 | |
| RS02051M-2024T6 | Surface Standard with .2, .5, 1mm Notches, 2024T6 | 1 | |
| RS02051M-301 | Surface Standard with .2, .5, 1mm Notches, 301 Stainless | 1 | |
| RS02051M-303 | Surface Standard with .2, .5, 1mm Notches, 303 Austenitic Stainless, 36mmLx 20mmW x 2mmH | 1 | |
| RS02051M-304 | Surface Standard with .2, .5, 1mm Notches, 304 Stainless | 1 | |
| RS02051M-304L | Surface Standard with .2, .5, 1mm Notches, 304L Stainless | 1 | |
| RS02051M-4130 | Surface Standard with .2, .5, 1mm Notches, 4130 Steel, 36mmL x 20mmW x 2mmT | 1 | |
| RS02051M-4340 | Surface Standard with .2, .5, 1mm Notches, 4340 Steel | 1 | |
| RS02051M-6AL4V | Surface Standard with .2, .5, 1mm Notches, 6AL4V Titanium | 1 | |
| RS02051M-7075T6 | Surface Standard with .2, .5, 1mm Notches, 7075T6 | 1 | |
| RS02051M-7075T7 | Surface Standard with .2, .5, 1mm Notches, 7075T7 (40%IACS) | 1 | |
| RS02051M-I600 | Surface Standard with .2, .5, 1mm Notches, Inconel 600, Per A330, 51-63-01, PG601, FIG601 | 1 | |
| RS02051M-I718 | Surface Standard with .2, .5, 1mm Notches, Inconel 718, Per A330, 51-63-01, PG601, FIG601 | 1 | |
| RS02051M-MAG | Surface Standard with .2, .5, 1mm Notches, Magnesium | 1 | |
| RS0212-1 | Reference Standard, Inconel 718, Surface Notches, .012, .020" Depth | 1 | |
| RS05115M-304 | Surface Standard (metric), 304 stainless, with .5, 1 and 1.5 mm deep notches | 1 | |
| RS051246M-304 | Surface Standard, Metric, 304 Stainless | 1 | |
| RS0512M-2024T3 | Surface Standard (Metric), .5mm, 1mm, 2mm, 2024-T3 aluminum | 1 | |
| RS0512M-2024T3-1 | Surface Standard (metric), 2024-T3 aluminum .5mm, 1mm and 2mm notches..80mm long x 35mm wide x 7mm thick, Width .1 +/- .05 | 1 | |
| RS0512M-304 | Surface Standard (Metric), .5mm, 1mm, 2mm, 304 Stainless | 1 | |
| RS0512M-304L | Surface Standard (Metric), .5mm, 1mm, 2mm, 304L Stainless | 1 | |
| RS0512M-4340 | Surface Standard (Metric), .5mm, 1mm, 2mm, 4340 | 1 | |
| RS0512M-6061-T4 | Surface Standard (Metric), .5mm, 1mm, 2mm, 6061-T4 | 1 | |
| RS0512M-6AL4V | Surface Standard (Metric), .5mm, 1mm, 2mm, 6AL4V Titanium | 1 | |
| RS0512M-7075T6 | Surface Standard (Metric), .5mm, 1mm, 2mm, 7075-T6 aluminum | 1 | |
| RS0512M-I600 | Surface Standard (Metric), .5mm, 1mm, 2mm, Inconel 600 | 1 | |
| RS0512M-MAG | Surface Standard (Metric), .5mm, 1mm, 2mm, Magnesium | 1 | |
| RS051M-6AL4V | Special Surface Standard with 2 notches, 1mm long x .5mm deep x .2mm wide..2mm long x 1.0mm deep x .2mm wide..100mm x 50mm x 5mm 6AL-4V | 1 | |
| RS0813-7075T6 | Surface Standard, .008"-.010"-.030" deep notches, 7075-T6 | 1 | |
| RS0824 | SRS, SURFACE REFERENCE STANDARD | 1 | |
| RS0824-.060-2024T3 | Surface Reference Standard, .008", .020", .040" x .060" Long, 2024T3 Aluminum | 1 | |
| RS0824-.060-7075T6 | Surface Reference Standard, .008", .020", .040" x .060" Long, 7075-T Aluminum | 1 | |
| RS0824-060 | REFERENCE STANDARD | 1 | |
| RS0824-15-5PH | Surface Standard, .008, .020, .040 notches, 15-5PH SS | 1 | |
| RS0824-17-7 | Surface Standard, .008"-.020"-.040" deep notches, 17-7 | 1 | |
| RS0824-17-7/TH1050 | Surface Standard, .008"-.020"-.040" deep notches, 17-7 TH1050 | 1 | |
| RS0824-2014T6 | Surface Standard, .008"-.020"-.040" deep notches, 2014-T6 | 1 | |
| RS0824-2024T3 | Surface Standard, .008"-.020"-.040" deep notches, 2024-T3 | 1 | |
| RS0824-2024T3-BA | Surface Standard, .008"-.020"-.040" deep notches, 2024-T3, per Bombardier/Canadair 51-20-06 PT1 PG7 FIG5 | 1 | |
| RS0824-2024T6 | Surface Standard, .008"-.020"-.040" deep notches, 2024-T6 | 1 | |
| RS0824-2196-T82 | Surface Standard, .008"-.020"-.040" deep notches, 2196-T82 | 1 | |
| RS0824-301-1/2H | Surface Standard, .008, .020 and .040 notches, 301 1/2H sur cond 2D per MIL-S-5059 | 1 | |
| RS0824-301-1/2H-BA | Surface Standard, .008, .020 and .040 notches, 301 1/2H sur cond 2D per MIL-S-5059, per Bombardier/Canadair 51-20-06 PT1 PG7 FIG5 | 1 | |
| RS0824-301-1/4H | Surface Standard, .008"-.020"-.040" deep notches, 301 1/4H sur cond 2D per MIL-S-5059 | 1 | |
| RS0824-302 | Surface Standard, .008"-.020"-.040" deep notches, 302 Stainless Steel | 1 | |
| RS0824-303 | Surface Standard, .008"-.020"-.040" deep notches, 303 Stainless Steel | 1 | |
| RS0824-304 | Surface Standard, .008"-.020"-.040" deep notches, 304 Stainless | 1 | |
| RS0824-304L | Surface Standard, .008"-.020"-.040" deep notches, 304L Stainless | 1 | |
| RS0824-316 | Surface Standard, .008"-.020"-.040" deep notches, 316 Stainless | 1 | |
| RS0824-4130 | Surface Standard, .008"-.020"-.040" deep notches, 4130 Steel | 1 | |
| RS0824-4140 | Surface Standard, .008"-.020"-.040" deep notches, 4140 Steel | 1 | |
| RS0824-4340 | Surface Standard, .008"-.020"-.040" deep notches, 4340 Steel | 1 | |
| RS0824-4340-VMS3RS-062 | Reference Standards are 3” Long x 2” Wide x ¼” Thick, 3 Surface EDM notches: 0.008” deep x 0.062” long, 0.020” deep x 0.062” long and 0.040” deep x 0.062” long | 1 | |
| RS0824-4340/HT | Surface Standard, .008"-.020"-.040" deep notches, 4340 Steel, Heat Treat to 180-200KSI | 1 | |
| RS0824-6061T4 | Surface Standard, .008"-.020"-.040" deep notches, 6061-T4 Aluminum | 1 | |
| RS0824-6061T6 | Surface Standard, .008"-.020"-.040" deep notches, 6061-T6 Aluminum | 1 | |
| RS0824-6AL4V | Surface Standard, .008"-.020"-.040" deep notches, 6AL4V | 1 | |
| RS0824-6AL4V-3 | Surface Standard, .008"-.020"-.040" deep notches, 6AL4V, 1' x 3" x .25" w/Wooden Case | 1 | |
| RS0824-7050T7 | Surface Standard, .008"-.020"-.040" deep notches, 7050-T7451 | 1 | |
| RS0824-7075T6 | Surface Standard, .008"-.020"-.040" deep notches, 7075-T6 | 1 | |
| RS0824-7075T6-BA | Surface Standard, .008"-.020"-.040" deep notches, 7075-T6, per Bombardier/Canadair 51-20-06 PT1 PG7 FIG5 | 1 | |
| RS0824-7075T7 | Surface Standard, .008"-.020"-.040" deep notches, 7075-T7 | 1 | |
| RS0824-7475T7 | Surface Standard, .008"-.020"-.040" deep notches, 7475-T7, 39%-45% IACS | 1 | |
| RS0824-BA13 | Surface Standard, .008, .020, .040 notches, Aluminum Bronze Alloy | 1 | |
| RS0824-I600 | Surface Standard, .008"-.020"-.040" deep notches, Inconel 600 | 1 | |
| RS0824-I700 | Surface Standard, .008"-.020"-.040" deep notches, Inconel 700 | 1 | |
| RS0824-I718 | Surface Standard, .008"-.020"-.040" deep notches, Inconel 718 | 1 | |
| RS0824-I718-BA | Surface Standard, .008"-.020"-.040" deep notches, Inconel 718, per Bombardier/Canadair 51-20-06 PT1 PG7 FIG5 | 1 | |
| RS0824-MAG | Surface Standard, .008"-.020"-.040" deep notches, Magnesium | 1 | |
| RS0824-T6AL4V-BA | Surface Standard, .008"-.020"-.040" deep notches, 6AL4V Titanium, per Bombardier/Canadair 51-20-06 PT1 PG7 FIG5 | 1 | |
| RS0825-2024T3 | Surface Standard, .008"-.020"-.050" deep notches, 2024-T3 Aluminum | 1 | |
| RS0834-T6AL4V | Surface Standard, .008"-.030"-.040" deep notches, T6AL4V | 1 | |
| RS1-4340 | REFERENCE STANDARD | 1 | |
| RS123-2024T3 | Surface Standard,2024-T3 Aluminum, .010, .020, .030 deep notches | 1 | |
| RS123X60-7075T6 | Surface Standard,7075-T6 Aluminum, .010, .020, .030 deep notches 4"x1"x.375" thick, .060" long, .006" max wide notch | 1 | |
| RS135-MAG-1 | Surface Standard, Magnesium, .010, .030, .050 deep notches, 1" long notches, .003-.010 width, 3.375 x 2 x .250 thick | 1 | |
| RS15 | NDT STANDARD | 1 | |
| RS34-2024T6-1 | Surface Standard, 2024-T6 Aluminum, .040" deep x 1" long x .006 +/- .004 wide, .030" deep x .120" long x .006 +/- .004 wide notches. 1" x 3" x .25" | 1 | |
| RS367SAL | NDT REFERENCE STANDARD 367 BOEING | 1 | |
| RS4-2024T3 | Surface Standard, 2024-T3 Aluminum, .040 deep notch | 1 | |
| RS4-4340 | Surface Standard, 4340, .040 deep notch | 1 | |
| RS4-6AL4V | Surface Standard, 6AL-4V, .040 deep notch | 1 | |
| RS9000-1 | DC9 REFERENCE STANDARD PER BOEING SB DC9-54A031 PAGE 16 FIGURE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| RSAF-304 | PH TOOL REFERENCE STANDARD STAINLESS SPEC USAF TO 33-B-1-1 | 1 | |
| RSAF-4340 | Air Force Standard, 4340 aluminum | 1 | |
| RSAF-7075T6 | Air Force Standard, 7075T6 aluminum | 1 | |
| RSAF-T6AL4V | Air Force Standard, 6AL-4V Titanium | 1 | |
| RSDC6-5 | BOEING REFERENCE STANDARD DC6 | 1 | |
| RSM125/3.9 | Standard Rotary Probe | 1 | |
| RSN-17-7 | Navy Reference Standard, 17-7 Alloy | 1 | |
| RSN-2024T3 | Navy Reference Standard, 2024T3 Aluminum | 1 | |
| RSN-2024T3-1 | Navy Reference Standard, 2024T3 Aluminum *.040" +004/-000 countersink notches, similar to Boeing 194 standard* | 1 | |
| RSN-3AST | Gage Set NSN 5280-01-352-1336, Consist of 7075T6, 4340 & 6AL4V Standards | 1 | |
| RSN-4330ST | Navy Reference Standard,4330 Steel | 1 | |
| RSN-4340ST | Navy Reference Standard,4340 Steel | 1 | |
| RSN-7075T6 | Navy Reference Standard, 7075T6 Aluminum | 1 | |
| RSN-T6AL4V | Navy Reference Standard, 6AL-4V Titanium | 1 | |
| RST1016 | ROLLER STAKING TOOLS STANDARD, 1/2 AND FIRST OVERSIZE | 2 | |
| RST2200 | ROLLER STAKING TOOLS STANDARD & FIRST OVERSIZE | 1 | |
| RST4265 | ROLLER STAKING TOOLS STANDARD & FIRST OVERSIZE | 1 | |
| RT11 HOLDER | HOLDER FOR RT11 STANDARD | 1 | |
| RT11 Holder | Holder for RT11 Standard | 1 | |
| RT115-015 | PARKER BAYSIDE: RT SERIES STEALTH MULTIDRIVE GEARBOX, RIGHT ANGLE, HOLLOW SHAFT, 115MM FRAME SIZE, 15:1 RATIO, STANDARD BACKLASH | 1 | |
| RT4550 | STANDARD AXLE-JACK (RT-DESIGN) - 45 TON | 1 | |
| RT4550-001 | STANDARD AXLE-JACK (45T) | 8 | |
| RT6050 | STANDARD AXLE-JACK (60T) | 4 | |
| RT9050-001 | STANDARD AXLE-JACK (90T) | 7 | |
| RTY905025-11-90001 | STANDARD AXLE JACK 90T | 1 | |
| RUK-SHB-071098 | Aluminum Standard, 31.75mm hole | 1 | |
| RV10-100 | ENGINE INLET PLUGS, Standard Cowling (set of 3) | 1 | |
| RYA1011 | WRENCH, RATCHETING BOX, 25° OFFSET, STANDARD LENGTH, 5/16IN-11/32IN, 12-POINT | 3 | |
| RYA1214 | WRENCH, RATCHETING BOX, 25° OFFSET, STANDARD LENGTH, 3/8IN-7/16IN, 12-POINT | 4 | |
| RYA810 | WRENCH,RATCHETING BOX,25 OFFSET.STANDARD LENGHT,1/4"-5/16",12- POINT | 3 | |
| Rolls Royce | STANDARDS material for boroscopy | 1 | |
| S-17-1 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 1, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-2 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 2, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-3 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 3, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-4 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 4, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-5 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 5, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-6 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 6, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-7 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 7, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-8 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 8, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| S-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| S-K-002 | Custom COMAC 29 Hole Standard. Material: 4330 Steel. EDM: .030" x .030" x .005" ± .002" Corner EDM Notches in each hole. Includes 3 Surface EDM Notches: Hole sizes: ±0.005 tolerance: 1/8(3.175), 5/32(3.962), 3/16(4.750),7/32(5.537), 1/4(6.350), 9/32(7 | 1 | |
| S0143 | Fokker 50/60 Reference Standard PART 6 53-30-03 PAGE 9. Material: 2024-T3 Alclad Aluminum. | 1 | |
| S41-E1A | BOEING CUSTOM REFERENCE STANDARD MCU ESM S41-E1A NDI REF STD PER DRAWING SK667-00011. | 1 | |
| S41-E1C | BOEING CUSTOM REFERENCE STANDARD MCU ESM S41-E1C NDI REF STD PER DRAWING SK667-00012. | 1 | |
| S41-F1B | BOEING CUSTOM REFERENCE STANDARD MCU ESM S41-F1B NDI REF STD PER DRAWING SK667-00010. | 1 | |
| S46-C2 | BOEING REFERENCE STANDARD S42-C6 FIGURE 2. MATERIAL: 2024-T3 CLAD. RIVET: BACR15CE6. Includes Test Report and Certificate of Conformance | 1 | |
| S46-G1A/G2A | BOEING REFERENCE STANDARD FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. FASTENERS: BACR15CE6D 2 PLACES. Includes Certification Report. | 1 | |
| S53-10-103.3/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-25 PT 4 FIGURE 3&4 PAGES 7&8. Includes Test Report and Certificate of Conformance. | 1 | |
| S57-10-105.2/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-58 PT 6 FIGURE 7-9 PAGES 13-15. Material: 2024-T3 Includes Test Report and Certificate of Conformance. | 1 | |
| S57-10-105.2/2 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-58 PT 6 FIGURE 7-9 PAGES 13-15. Material: 2024-T3 Includes Test Report and Certificate of Conformance. | 1 | |
| S76-009 | FUSELAGE COVER, C-MODEL (standard config. w/ new VOR antennae position) | 1 | |
| S76-110 | ENGINE COVER, C-MODEL (standard config. w/ new VOR antennae position) | 1 | |
| S76-115 | INSULATED ENGINE COVER, C-MODEL (standard config. w/ new VOR antennae position) | 1 | |
| S76-210 | BLADE COVERS, S76D model, (Standard Type) (set of 4) | 1 | |
| S80A | STANDARD HND | 2 | |
| SA-455T | REF STANDARD AND PROBE | 1 | |
| SA00-N60S | WEDGE STANDARD (NDT) | 1 | |
| SA09550031-11 | HORIZONTAL STABILIZER AFT SPAR CAP STANDARD | 1 | |
| SA14E | SOCKET DRIVER HEX STANDARD 7/16 INCH | 1 | |
| SA18E | 1/2" DRIVE SAE 9/16" STANDARD HEX BIT SOCKET DRIVER | 1 | |
| SA20E | "1/2"" DRIVE SAE5/8"" STANDARD HEX BIT SOCKET DRIVER" | 1 | |
| SA227-1 | M7 Standard, SA227 EC Cal Standard, Pattern 1 | 1 | |
| SA24E | "1/2"" DRIVE SAE 3/4"" STANDARD HEX BIT SOCKET DRIVER" | 1 | |
| SAAB 5341-151-01I | REFERENCE STANDARD SAAB 340 FIG.1 5341-151-01I PART 4 PAGE 5. MATERIAL: 4140 CRES STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| SAAB 5512-332-03I | SAAB 340 REFERENCE STANDARD 5512-332-03I FIGURE 1 PAGE 2, 55-10-00 PART 6 PAGE 3. MATERIAL: 2024-T351 ALUMINUM WITH 4 HL10 VAP-6-7 HI-LOK FASTENERS.. Includes Test Reprort and Certificate of Conformance. | 1 | |
| SAHB-6 | STANDARD AIRCRAFT HANDBOOK- SEVENTH EDITION | 1 | |
| SB 146/53-167/2 | BAE 146-RJ SERIES REFERENCE STANDARD ISB.53-167 APPENDIX 2 DRAWING 15, PAGE 23&24. Material: Substitute 2024-T3 Clad for 2014A-T4 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| SB 57-3329 FIG.9 | Raytheon 12 Hole Standard Calibration Block Figure 9 Page 20, Service Bulletin SB 57-3329. Hole sizes 9/64, 11/64,3/16 and 13/64. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| SB08270269-7 | DC-8 Reference Standard, DC-8 27A269, Figure 1, Sheet 1 of 1 | 1 | |
| SB09270209-5 | Eddy Current Inspection Reference standard SB DC9-27-209 R07 | 1 | |
| SB09270288-5 | NDT REFERENCE STANDARD - SB09270288-5 | 1 | |
| SB095184-7 | TOOL, STANDARD | 1 | |
| SB09530016-5 | Eddy Current Inspection Reference standard SB MD-A27-320 R01 | 2 | |
| SB09530016-5-9/32 | Douglas Standard, MD80 FAA-AD 98-17-00:CARD4917, 7075-T651 | 1 | |
| SB09530016-5/303SS | DOUGLAS REFERENCE STANDARD 53-253, 303/SS | 1 | |
| SB09530016-5/AL | DOUGLAS REFERENCE STANDARD 53-253, 7075-t651 | 1 | |
| SB09530016-5/TI | DOUGLAS REFERENCE STANDARD 53-253, TITANIUM | 1 | |
| SB09530186-35 | Boeing Standard, SB53-216, PG21 FIG1 SHEET1 | 1 | |
| SB09530186-9 | Eddy Current Inspection Reference standard SB DC9-53-186 R06 | 1 | |
| SB09530231-17 | DC9 Standard, S/B A53-191, 231, 232:SSNo.3683D SHEET13 | 1 | |
| SB09530231-9 | Douglas Standard, DC-9 S/B A53-231:PG26 FIG2 | 1 | |
| SB09530258-1 | Douglas Standard, DC-9, Bulletin 53-258: PG25 FIG2 | 1 | |
| SB09540030-5 | DC9 SURFACE REFERENCE REFERENCE STANDARD DC9-54-030. MATERIAL: 17-7 PH STAINLESS STEEL. EDM NOTCH: 0.002"-0.010" WIDE x 0.030" DEEP. | 1 | |
| SB09550023-17 | Douglas Standard, DC-9: PG31 FIG1 | 2 | |
| SB09570119-3 | Douglas Standard, DC9 SB 57-119 REV5: PG32 FIG1 | 1 | |
| SB09570184-7 | Ultrasonic Inspection Reference standard | 1 | |
| SB09570184-9 | Douglas Standard, 1 notch block, 7075-T651 | 1 | |
| SB10053115PLATE | Fokker Standard, 70/100, PG18, FIG1 | 1 | |
| SB10053118 | Calibration Standard | 1 | |
| SB10270203-3 | Douglas Reference Standard, DC10-A27-203 - PRIMER, GREY TOPCOAT | 1 | |
| SB10270203-5 | Douglas Reference Standard, DC10-A27-203 - HT, CAD PLATE, PRIMER, GREY TOPCOAT | 1 | |
| SB10550016-147 | Douglas Reference Standard, DC10-55A016 R07, Page 14, Figure 1, Sheet 1 | 1 | |
| SB10550024-3 | DC10 Standard, DC10-55-024:PG16 FIG1 | 1 | |
| SB10550024-5 | DC10 Standard, DC10-55-024:PG17 FIG1 | 1 | |
| SB10550024-501 | DC10 Standard, DC10-55-024:PG17 FIG1 | 1 | |
| SB10550024-7 | DC10 Standard, DC10-55-024:PG18 FIG1 | 1 | |
| SB11530001-5 | DOUGLAS MD-11 REFERENCE STANDARD. MD11-53-001 FIGURE 1 SHEET 1. MATERIAL: 7075-T6 ALUMINUM | 1 | |
| SB190-57-0026 | Reference Standard, 3/16" Hole | 1 | |
| SB190-57-0034 | Reference Standard, 1/4" Hole | 1 | |
| SBE2155-A01 | ADAPTOR TO BLEED COMPONENT STANDARD BIP DE-ACTIVATION SCREW LENGTH: 70CM/25.5470” | 1 | |
| SBE2155-A02 | ADAPTOR TO BLEED COMPONENT STANDARD EM/NEW BLEED DE-ACTIVATION SCREW LENGTH: 70CM/25.5470” | 1 | |
| SCA-1289.00 | HYDRO STANDARD B737 TAIL TRIPOD JACK | 1 | |
| SCA-7011 | HAND PUMP TO REFURBISH ENGINE OIL BASED ON STANDARD US CAN SIZES (1 US QT). | 2 | |
| SCA-N2-KIT-DIN477 | DIN 477 NITROGEN REGULATOR BRACKET KIT (OTHER NATIONAL STANDARDS ON STOCK ALSO) | 1 | |
| SCCS/14-21AL | splitted conical calibration standard | 1 | |
| SCCS/3-7AL | splitted conical calibration standard | 1 | |
| SCCS/7-14AL | splitted conical calibration standard | 1 | |
| SCCS14-21AI | Reference Standard 2-887-01-9315S | 1 | |
| SCCS3-7 | REFERENCE STANDARD | 1 | |
| SCCS3-7AI | Reference Standard 2-887-01-9319S | 1 | |
| SCH-002 | CANOPY/NOSE COVER, Standard Cirrus, all year use | 1 | |
| SCREWDRIVER, RATCHETING, SOFT GRIP, STANDARD, RED | SCREWDRIVER, RATCHETING, SOFT GRIP, STANDARD, RED | 1 | |
| SD-BRACKET | CELESTE® SD-BRACKETN STANDARD ADHESIVE BACKED DEODORANT DISC BRACKET | 5 | |
| SD12552-1 | NOSE WHEEL WRENCH-STANDARD | 1 | |
| SD12553-1 | NOSE WHEEL WRENCH-STANDARD | 2 | |
| SDDP162 | STANDARD PHILLIPS (SIZE 20.13/32) | 1 | |
| SDDP62 | STANDARD PHILLIPS (SIZE 10.13/32) | 1 | |
| SDK-15 | SANDING DRUM & SLEEVE KITS STANDARD LOCK STYLE | 1 | |
| SE.4.44 | 328JET CALIBRATION STANDARD (SE.4.44); 51-60-01 PAGE 9/10 FIG.605 EDDY CURRENT | 1 | |
| SERVER2008UP | SERVER2008UP;Windows Server 2008 Upgrade from Standard OS - sold at time of purchase only | 1 | |
| SERVER2012R2 | SERVER2012R2;Windows Server 2012 R2 Standard OS - sold at time of purchase | 1 | |
| SGD2B | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 7/32" | 1 | |
| SGD4B | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 1/4" | 1 | |
| SGD6B | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 5/16" | 1 | |
| SGD8B | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 3/8" | 1 | |
| SGD8BR | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 3/8" | 2 | |
| SGDMRC44B | SCREWDRIVER, RATCHETING, SOFT GRIP, STANDARD, RED | 3 | |
| SGDMRC44BO | SCREWDRIVER, RATCHETING, SOFT GRIP, STANDARD, ORANGE | 2 | |
| SGDP162BR | STANDARD PHILLIPS (SIZE 20.13/32) | 1 | |
| SGDP31IRB | SREWDRIVER, SOFT GRIP STANDARD PHILLIPS #1 | 1 | |
| SGDP42IRB | SREWDRIVER, SOFT GRIP STANDARD PHILLIPS #2 | 1 | |
| SGDP63IRB | SREWDRIVER, SOFT GRIP STANDARD PHILLIPS #3 | 1 | |
| SGDP64IRB | SREWDRIVER, SOFT GRIP STANDARD PHILLIPS #4 | 1 | |
| SGMRC44B | ATCHETING SOFT GRIP STANDARD SCREWDRIVER (RED) | 1 | |
| SGT4BR | DRIVER, STANDARD SHA | 2 | |
| SH80A | RATCHET, STANDARD HANDLE, COMFORT GRIP, 1/2" DRIVE, 12" LONG | 2 | |
| SHD10R | "FLAT TIP INSTINCT® HARD GRIP STANDARD SCREWDRIVER (RED)" | 2 | |
| SHD6 | STANDARD FLAT TOP SCREW DRIVER | 1 | |
| SHD8R | "FLAT TIP INSTINCT® HARD GRIP STANDARD SCREWDRIVER (RED)" | 2 | |
| SHDP421 | STANDARD CROSS SCREW DRIVER | 1 | |
| SHDP42IRR | PHILLIPS® #2 INSTINCT® HARD GRIP STANDARD SCREWDRIVER | 2 | |
| SHDP62IRR | STANDARD PHILLIPS (SIZE 10.13/32) | 2 | |
| SHDX60G | STANDARD SCREW CUTTER | 1 | |
| SHDX60O | STANDARD SCREW CUTTER | 1 | |
| SHDX60R | HARD HANDLE STANDARD SCREWDRIVERS SET | 2 | |
| SHLF80 | Ratchet, Dual 80®, Flex Head, Long Standard Handle, Comfort Grip, 1/2" drive, 25 3/4" | 1 | |
| SIGMATEST (D2-069) | CALIBRATION STANDARD SET (2 STDS.) 4.4 MS/M (8 IACS);58 MS/M (100 IACS) | 1 | |
| SK215T-10001 | CALIBRATION STANDARD NACELLE SUPPORT - FORK END & STRUT | 1 | |
| SK215T-10002 | STANDARD CALIBRATION NACELLE - SLOPING LONGERON | 1 | |
| SK601R-10022 | STANDARD CALIBRATION | 1 | |
| SK601R-10040-1 | REFERENCE STANDARD | 4 | |
| SK601R-10041 | CALIBRATION STANDARD | 2 | |
| SK601R-10042-1 | TOOL, CALIBRATION STANDARD | 1 | |
| SK601R-20003 | CALIBRATION REFERENCE STANDARD | 2 | |
| SK601R-30001 | CALIBRATION STANDARD | 2 | |
| SK601R-30008A | CALIBRATION STANDARD | 6 | |
| SK601R-30008A-001 | REFERENCE STANDARD | 1 | |
| SK601R-30009 | BOMBARDIER CALIBR. REF. STANDARD | 2 | |
| SK601R-30009-1 | CALIBRATION, REFERENCE STANDARD | 5 | |
| SK601R-30013-3 | CALIBRATION STANDARD | 2 | |
| SK601R-30014 | CALIBRATION STANDARD REFERENCE | 2 | |
| SK601R-30014 REV B | CALIBRATION STANDARD | 1 | |
| SK601R-30038 | CALIBRATION STANDARD | 1 | |
| SK601R-30039 | NDT CALIBRATION REFERENCE STANDARD | 2 | |
| SK601R30008A | CALIBRATION, TEST STANDARD | 6 | |
| SK601R30009-1 | CALIBRATION STANDARD BLANK | 5 | |
| SK601R30014 | REFERENCE STANDARD (CRJ200) | 2 | |
| SK601R30017 | TEST STANDARD | 1 | |
| SK601R30038 | REFERENCE STANDARD (CRJ200) | 1 | |
| SK601R−10043 | Calibration reference standard block (Bombardier Inc.) | 1 | |
| SL80A | RATCHET, DUAL 80, LONG STANDARD HANDLE, 1/2" DRIVE, 15" | 2 | |
| SL90 KIT | Standard Lock Kit for A300/A320/A340 | 1 | |
| SLS-123456-SS304 | BOEING REFERENCE STANDARD PER DRAWING STD-1. MATERIAL: 304 STAINLESS STEEL. CHEMICAL CONVERSION COATING PER MIL-DTL-5541, CLASS 1A. Includes Certification Traceable to NIST and Material Certs. | 1 | |
| SLS-IN718-201-010793B2 | BOEING REFERENCE STANDARD, 0.030 x 0.030 x .005" +/- 002" CORNER EDM NOTCH. MATERIAL: 718 INCONEL | 1 | |
| SM872400 | STANDARD NAME SELF-ADHESIVE LABEL; IN VINYL; 150X150MM | 1 | |
| SMO415431 | STARTING SKID STANDARD ASSEMBLY/REMOVAL TOOL (BAKER HUGHES) | 1 | |
| SMT-PRO-P-MS14103-6 | STANDARD PORTABLE SWAGER CUTTER AND IPR AND LOAD CELL SMT PRO KITS | 1 | |
| SMT-PRO-P-MS14103-7 | STANDARD PORTABLE SWAGER CUTTER AND IPR AND LOAD CELL SMT PRO KIT | 1 | |
| SN05-6489 | ULTRASONIC ANGLE BEAM STANDARD | 1 | |
| SN08530002-11 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET35 FIG16.1 | 1 | |
| SN08530002-13 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET36 FIG16.2 | 1 | |
| SN08530002-15 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET37 FIG16.3 - .063" CLAD | 1 | |
| SN08530002-17 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET37 FIG16.3 - .071" CLAD | 1 | |
| SN08530002-19 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET37 FIG16.3 - .080" CLAD | 1 | |
| SN08530002-21 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET37 FIG16.3 - .090" CLAD | 1 | |
| SN08530002-23 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET37 FIG16.3 - .125" CLAD | 1 | |
| SN08530002-25 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET38 FIG16.4 - .040" CLAD | 1 | |
| SN08530002-27 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET38 FIG16.4 - .050" CLAD | 1 | |
| SN08530002-29 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET38 FIG16.4 - .063" CLAD | 1 | |
| SN09530002-03 | Douglas Standard w/ Certs, DC9:SN09530002 SHEET50 FIG23.0 | 1 | |
| SN09530002-15 | Douglas Standard w/ Certs, DC9:SN09530002 SHEET55 FIG24.0 | 1 | |
| SN09530002-23 | Douglas Standard w/ Certs, DC9:SN09530002 SHEET59 FIG25.0 | 1 | |
| SN09530004-3 | Douglas Standard w/ Certs, DC9:SN09530004 SHEET13 FIG2.0 & 2.1, -5 & -7 Layers | 1 | |
| SN10280002 | DOUGLAS REFERENCE STANDARD FIGURE 2 SHEETS 2-8. INCLUDES GANG CHANNEL PART NUMBER RMG9421-3-7-2. Test Report and Certificate of Conformance included. | 1 | |
| SN10280002-7001 | Douglas Standard w/ Certs | 1 | |
| SN10550000 | BOEING REFERENCE STANDARD SHEETS 1-4. DETAIL -3,-5,-7. MATERIAL: 7075-T7 & 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| SN10550000-7001 | Calibration Standard, DAC 60-13AI (REV 6-86):DWG No. SN10550000 | 1 | |
| SN10570001-3 | Reference Standard, MD11-5750-14150:PG12 FIG2, 4340 STEEL .125 IN | 1 | |
| SN10570001-5 | Reference Standard, MD11-5750-14150:PG12 FIG2, 4340 STEEL .800 IN | 1 | |
| SN10570004-3 | Reference Standard, MD11-57-078:PG40 FIG1, 2024-T351 | 1 | |
| SN15B | 1/2" DRIVE 15" STANDARD HANDLE BREAKER BAR | 4 | |
| SN24C | 1/4 DRIVE 24" STANDARD HANDLE BREAKER BAR | 2 | |
| SN36 | /2" DRIVE 36" STANDARD HANDLE BREAKER BAR | 1 | |
| SN90570006 | BOEING REFERENCE STANDARD | 1 | |
| SO111-7 | Custom FOKKER F28 Horizontal Stab. Drive Junction Fitting Eddy Current Standard per drawing # 28. 0-3210/2610-Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| SOEX10 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 5/16", 12-POINT | 3 | |
| SOEX11 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 11/32", 12-POINT | 2 | |
| SOEX12 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 3/8", 12-POINT | 3 | |
| SOEX14 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 7/16", 12-POINT | 3 | |
| SOEX16 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 1/2", 12-POINT | 3 | |
| SOEX18 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 9/16", 12-POINT | 3 | |
| SOEX20 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 5/8", 12-POINT | 3 | |
| SOEX22 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 11/16", 12-POINT | 3 | |
| SOEX24 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 3/4", 12-POINT | 3 | |
| SOEX26 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 13/16", 12-POINT | 3 | |
| SOEX28 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 7/8", 12-POINT | 2 | |
| SOEX30 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 15/16", 12-POINT | 2 | |
| SOEX32 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 1", 12-POINT | 2 | |
| SOEX40 | WRENCH COMBINATION STANDARD 1-1/4" | 2 | |
| SOEX710 | STANDARD WRENCH (MAY OPEN) | 2 | |
| SOEX8 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 1/4", 12-POINT | 4 | |
| SORFIT 146/151/1 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 53-20-96 PG 14&15 FIGURE 5&6. Includes Test Report and Certificate of Conformance. | 1 | |
| SORFIT 146/151/2 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 53-20-96 PG 14&15 FIGURE 5&6. Includes Test Report and Certificate of Conformance. | 1 | |
| SORFIT 146/154/1 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 6 53-20-95 PG 11 FIG 5. Includes Test Report and Certificate of Conformance. | 1 | |
| SORFIT 146/164/1 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 53-20-19 PG 9 FIG 5. Includes Test Report and Certificate of Conformance. | 1 | |
| SORFIT 146/166/1 | BAE REFERENCE STANDARD 146-RJ 53-238 53-30-15 PT 6 FIGURE 5&6 PAGES 9&10. Includes Test Report and Certificate of Conformance. | 1 | |
| SORFIT 146/166/2 | BAE REFERENCE STANDARD 146-RJ 53-238 53-30-16 PT 6 FIGURE 4-6 PAGES 8-10. Includes Test Report and Certificate of Conformance. | 1 | |
| SP-078 | CALIBRATION STANDARD BATS | 1 | |
| SP-096 | CALIBRATION STANDARD BATS 53-30-30 | 1 | |
| SP-115 | CALIBRATION STANDARD BATS | 1 | |
| SP32E | 1/2" DRIVE #3 PHILLIPS STANDARD BIT SOCKET DRIVER | 1 | |
| SP42E | 1/2" DRIVE #4 PHILLIPS STANDARD BIT SOCKET DRIVER | 9 | |
| SPCP12L | REFERENCE STANDARD. PROCEDURE B CONFIG 2 | 1 | |
| SPECIALPARTREQ192380 | NON STANDARD CUSTOMER REQUESTED ITEM | 1 | |
| SPECTROLNF-Q210 | INCLUDING LNF Q210 OPTICAL PARTICAL, SOFTWARE, USER MANUAL CONNECTION CABLES AND POWER CORD, REQUIRES SA1015 STANDARD ACCESSORY KITS | 1 | |
| SPL-72148 | REFERENCE-STANDARD, 6AL-4V TITANIUM | 1 | |
| SPL1555-7-1 | BOEING STANDARD PUMP | 1 | |
| SPO-3932 | SLIDING PROBE CRACK STANDARD 2ND LAYER ALUMINUM - 1916915 -OLYMPUS | 1 | |
| SPO-5965.187-.218 | CALIBRATION STANDARD | 1 | |
| SPO-5965.281-.312 | CALIBRATION STANDARD | 1 | |
| SPO-5965.375-.437 | CALIBRATION STANDARD | 1 | |
| SPO-5965.437-.500 | CALIBRATION STANDARD | 1 | |
| SPT- RM200-C20T20-T6AL4V | 20 Hole Reference Standard, 1/8" Thru 3/4", w/20" Cornor Notch, w/ .20" Thru Notch, T6AL4V, Plus .008", .020" & .040" surface notches | 1 | |
| SPT-ES4040SS18-22/6WL | SPTech Dual Coil Hole Probe for Rohmann Elotest Standard, Stainless Steel, 18-22mm OD, 6" WL, 50-500KHz, Diff | 1 | |
| SPT-ES4040SS21/6WL/1M | SPTech Dual Coil Hole Probe for Rohmann Elotest Standard, Stainless Steel, 21mm OD, 6" WL, 250KHz-1MHz, Diff | 1 | |
| SR-1 | STANDARD RESISTOR | 1 | |
| SR1-MF | UNIT ROTOR - STANDARD | 2 | |
| SR1MF | UNIT ROTOR - STANDARD | 2 | |
| SRDH321 | 1/2" DRIVE 12 POINT SAE 1" STANDARD TORQUE ADAPTOR | 1 | |
| SRDH341 | 1/2" DRIVE 12 POINT SAE 1-1/16" STANDARD TORQUE ADAPTOR | 1 | |
| SRDH361 | 1/2" DRIVE 12 POINT SAE 1-1/8" STANDARD TORQUE ADAPTOR | 1 | |
| SRDH401 | 1/2" DRIVE 12 POINT SAE 1-1/4" STANDARD TORQUE ADAPTOR | 1 | |
| SRDH441 | 1/2" DRIVE 12 POINT SAE 1-3/8" STANDARD TORQUE ADAPTOR | 1 | |
| SRS-0824A | SRS, SURFACE REFERENCE STANDARD | 3 | |
| SRS-0824A-2024T3 | REFERENCE STANDARD | 1 | |
| SRS-0824A/7050T74 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| SRS-0824A/7075T6 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| SRS-0824M | MAGNESIUM CRACK STANDARD | 1 | |
| SRS-0824S | SURFACE STANDARD, .008"-.020"-.040" DEEP NOTCHES, 4340 STEEL | 3 | |
| SRS-0824S-4130 | REFERENCE STANDARD | 1 | |
| SRS-0824SS | SURFACE STANDARD, .008"-.020"-.040" DEEP NOTCHES, 304 STAINLESS | 1 | |
| SRS-0824SS-304 | SURFACE STANDARD | 1 | |
| SRS-0824T | SURFACE STANDARD, .008"-.020"-.040" DEEP NOTCHES, 6AL4V | 3 | |
| SRS-0824T/U880550 | REFERENCE STANDARD | 1 | |
| SRS-10S | REFERENCE STANDARD | 1 | |
| SRS-1S | REFERENCE STANDARD | 1 | |
| SRS-4A | SURFACE STANDARD, 2024-T3 ALUMINUM, .040 DEEP NOTCH | 1 | |
| SRS0824A | CALIBRATION TEST STANDARD (CTS) | 3 | |
| SRSD-0824S | REFERANS STANDARD | 1 | |
| SRSD-0824S REV.3 | REFERANS STANDARD | 1 | |
| SRSM-2510A | ec reference standard w/certs | 1 | |
| SRSM-2510T | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, TITANIUM ALLOY | 1 | |
| SRSM-51020S/WLD | urface reference standard, 4340 Steel, with EDM notch depths of 0.5mm", 1.0" and 2.0mm +/-1.3mm1 (0.2mm, 0.51mm and 1.02mm), Notch Width: .18mm Max. Depth: +/- .03mm. Reference standard overall dImensions 25.4mm X 101.6mm X 6.4mm). Includes Test Report a | 1 | |
| SS TYPE 301 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 301 STAINLESS . SIZE: 1.5"W x 3.75"L x .25" | 2 | |
| SS TYPE 304 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 304 STAINLESS STEEL. SIZE: 1.5"W x 3.75"L x .25" | 1 | |
| SS-MT-A2AIF-SUPP-1YR | SS-MT-A2AIF-SUPP-1YR;Support for standard VIAVI Mobile Tech app2app interface - 1 inst / 1 yr | 1 | |
| SS-MT-SVRUPLD-SUPP-1YR | SS-MT-SVRUPLD-SUPP-1YR;Support for standard MTA Test Result Server upload feature - 1YR/INSTR | 1 | |
| SS137-F2 | NDT REFERENCE STANDARD EDDY CURRENT | 1 | |
| SSDMR4B | SCREWDRIVER, RATCHETING MAGNETIC, STANDARD, BLACK, 8 3/4IN | 4 | |
| SSDMR4B0 | 8-3/4" RATCHETING STANDARD SCREWDRIVER (ORANGE) | 2 | |
| SSDMR4BO | SCREWDRIVER, RATCHETING, MAGNETIC, STANDARD, ORANGE, 8 3/4" | 2 | |
| SSDMR4BR | 8-3/4" RATCHETING STANDARD SCREWDRIVER (RED) | 1 | |
| SSI 55-11-115/1 | BAE 146-RJ SERIES REFERENCE STANDARD 55-11-10 PT 6 FIGURE 6&7 PAGES 12&13. Includes Test Report and Certificate of Conformance. | 1 | |
| SSI 57-20-151/152A/153A/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-20-50 PT 6 FIGURE 6&7 PAGES 10&11. Includes Test Report and Certificate of Conformance. | 1 | |
| SSI57-20-151/152A/153A/2 | BAE 146-RJ SERIES REFERENCE STANDARD 57-20-50 PT 6 FIGURE 8&9 PAGES 12&13. Includes Test Report and Certificate of Conformance. | 1 | |
| SSINO54-10-03 | CALIB STANDARD BLOCK (TI) | 1 | |
| ST 4340 | Surface Standard, .008", .020", .040" +/- .001 Deep Notches .005 Max Width, 4340 | 5 | |
| ST-8871D | CALIBRATION STANDARD | 4 | |
| ST10-907-H | STANDARD TOOL - CARBIDE TIPPED DRILL | 1 | |
| ST1000-A-8252 | Standard Tool - Bucking Bar | 1 | |
| ST1000-A-8252-1 | Standard tool-bucking bar | 2 | |
| ST1000-A-8252-2 | Standard tool-bucking bar | 2 | |
| ST1000-A-8252-3 | Standard tool-bucking bar | 2 | |
| ST1000-A-8252-4 | Standard tool-bucking bar | 2 | |
| ST1000-A-8252-5 | Standard tool-bucking bar | 2 | |
| ST1060-20 | Standard Tool - Decompression Fork | 1 | |
| ST1065C | Standard Tool - Installation Tool, Grommet, NAS1368 | 6 | |
| ST1065C-10-1 | Standard Tool - Installation Tool Grommet | 1 | |
| ST1065C-6-1 | Standard Tool - Installation Tool Grommet | 1 | |
| ST1066-22 | STANDARD TOOL SEAL RETAINER ADJUSTMENT TOOL | 1 | |
| ST1066-24 | STANDARD TOOL-ASSEMBLY AID,GAP COVER SEAL 737 HORIZ STAB | 1 | |
| ST1066-26 | STANDARD TOOL - SEAL INSTALLATION TOOL | 1 | |
| ST1066-27 | STANDARD TOOL - SEAL INSTALLATION TOOL | 1 | |
| ST1066-7 | STANDARD TOOL-INSTALLATION TOOL DOOR BULB SEAL | 1 | |
| ST1066RB | Standard Tool - Release Key For Pivot Bin Snubber, "Boeing Sky" Interior | 1 | |
| ST1066RB-1 | Standard Tool - Release Key | 2 | |
| ST1069D | STANDARD TOOL GROMMET SET FOR INSTALLATION OF BAC-G20L | 1 | |
| ST1069D-249 | Standard tool grommet set for installation of BAC-G20L | 1 | |
| ST1069D-374 | Standard tool grommet set for installation of BAC-G20L | 1 | |
| ST1069D-431 | Standard tool grommet set for installation of BAC-G20L | 1 | |
| ST1157G | Standard tool rivet die，BACR15GA TI-CB t.e | 1 | |
| ST1212E | STANDARD TOOL - HOLE SAW | 1 | |
| ST1212E-12500 | STANDARD TOOL -HOLE SAW | 1 | |
| ST1212E-1930 | Standard Tool Holesaw 1.930" Dia | 1 | |
| ST1212E-2988 | STANDARD TOOL HOLE SAW | 1 | |
| ST1212E-625 | HOLE SAW-STANDARD TOOL | 1 | |
| ST1212E-653 | Standard Tool Holesaw .653" Dia | 1 | |
| ST1212E-687 | Standard Tool Holesaw .687" Dia | 1 | |
| ST1212E-781 | Standard Tool Hole Saw .781" Dia | 1 | |
| ST1212E-812 | Standard Tool Hole Saw .8125" Dia | 1 | |
| ST1219Y-3RCA-3856-374-6-2-H-1 | STANDARD TOOL, REAMER | 1 | |
| ST1219Y3RCA3856-374-6-2H1 | STANDARD TOOL, REAMER | 1 | |
| ST1241BAC | STANDARD TOOL DRILL - THREADED SHANK FOR ANGLE MOTOR | 1 | |
| ST1257B | STANDARD TOOL - DRILL (CARBIDE), 4 FLUTES | 1 | |
| ST1257B-1250-300-1 | DRILL, STANDARD TOOL | 1 | |
| ST1257B1900-600-1 | 4 FLUTE SOLID CARBIDE STRAIGHT REAMER "DREAMER" UNDER BOEING STANDARD TOOL P/N: ST1257B SIZE: STRAIGHT SHANK, DIAMETER 0.190" LENGTH 6" | 1 | |
| ST1742C | Standard tool window seal installation | 1 | |
| ST1742C-A | STANDARD TOOL - WINDOW SEAL INSTALLATION | 2 | |
| ST1742C-A-1 | Standard Tool - Window Seal Installation | 1 | |
| ST1742F | STANDARD TOOL - 787 WINDOW INSTALL AND REMOVAL TOOL | 5 | |
| ST1742F-1 | STANDARD TOOL-787 WINDOW REM/I | 7 | |
| ST1813E | STANDARD TOOL - MISCELLANEOUS SCREWDRIVER BITS | 1 | |
| ST1813E-2 | Standard tool-misc.screwdriver bits | 3 | |
| ST1864P | Standard Tool Reamer - Carbide, Straight Flute, Piloted | 1 | |
| ST1864R | STANDARD TOOL - REAMER, CARBIDE, MULTI-STEP, STRAIGHT FLUTE | 1 | |
| ST1874R | PILOTED STEP REAMER UNDER BOEING STANDARD TOOL P/N: ST1874R SIZE: DIAMETERS 0.190" X 0.158" X 0.126", LENGTH 6" | 1 | |
| ST1876EA | STANDARD TOOL - BIN BUCKET QUICK RELEASE | 1 | |
| ST1876EA-1 | STANDARD TOOL - BIN BUCKET QUI | 4 | |
| ST2575A | Standard Tool - Torque Adapter | 5 | |
| ST2575C | STANDARD TOOL - FENWAL CONNECTORS, SLEEVE AND PIN PRESS TOOL, BAC5162-64 | 2 | |
| ST258/0-334C-1-185 | STANDARD TOOL - SPANNER NOSE PLIERS | 12 | |
| ST2580-1 | STANDARD TOOL - SPANNER NOSE PLIERS | 1 | |
| ST2580-104PA-12-61-.25 | Standard tool-deep socket variable | 2 | |
| ST2580-104PA-12-61-_25 | STANDARD TOOL-DEEP SOCKET VARIABLE | 2 | |
| ST2580-145 | STANDARD TOOL - SPANNER NOSE PLIERS | 1 | |
| ST2580-153 | Standard Tool - Spanner Wrench | 4 | |
| ST2580-185 | STANDARD TOOL - SPANNER NOSE PLIERS | 5 | |
| ST2580-251 | STANDARD TOOL - TORQUE WRENCH ADAPTER, 0.375 SLOT - 5-INCH OUTSIDE DIAMETER | 9 | |
| ST2580-267 | STANDARD TOOL - SPANNER WRENCH ADAPTER FOR BACN10RF NUTS | 13 | |
| ST2580-267-10 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-10-3-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-10-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-12-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-14-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-16-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-18-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-19-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-20 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-20-3-5-F | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-20-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-201-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-21-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-210-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-22-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-228-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-24-3-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 2 | |
| ST2580-267-24-4-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24-4-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-242-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-245-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-26-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-26-4-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-28 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-28-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-29-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-32 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-32-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-36-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-40-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-48-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-60-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-285-8 | STANDARD TOOL-SPANNER WRENCH,FACE TYPE | 1 | |
| ST2580-286-3A | STANDARD TOOL-SPANNER WRENCH-224NUT AND RACE ENDS | 1 | |
| ST2580-286-8 | STANDARD TOOL - SPANNER WRENCH, FACE TYPE | 5 | |
| ST2580-286-8-K | Standard tool spanner wrench，face type | 1 | |
| ST2580-334 | Standard Tool-Spanner Nose Pliers | 1 | |
| ST2580-334C | STANDARD TOOL - SPANNER NOSE PLIERS | 3 | |
| ST2580-334C-1 | STANDARD TOOL - SPANNER NOSE PLIERS | 1 | |
| ST2580-334C-1-145 | Standard Tool - Spanner Nose Pliers | 12 | |
| ST2580-334C-1-145 -185 | Standard Tool -Spanner Nose Pliers | 1 | |
| ST2580-334C-1-185 | Standard Tool - Spanner Nose Pliers | 12 | |
| ST2580-334C-1-185 -1-145 | Standard Tool -Spanner Nose Pliers | 1 | |
| ST2580-381A | Standard tool-spanner wrench | 2 | |
| ST2580-436B | STANDARD TOOL TORQUE WRENCH BOX END FOR BACC63CP ELECTROCAL CONNECTOR | 1 | |
| ST2580-469-2-12-20 | Standard tool-wrench offset box end | 1 | |
| ST2580-469-2-12-20-B | Standard Tool - Wrench Offset Box End | 2 | |
| ST2580-469-2-24-40B | Standard tool-wrench offset box end | 1 | |
| ST2583-13 | STANDARD TOOL-WRENCH SPLINE DRIVE | 2 | |
| ST2587D | STANDARD TOOL-COTTER PIN INSERTION AND BENDING TOOL | 1 | |
| ST2589A | Standard tool-pliers cannon connectors bacc45 ft | 1 | |
| ST2598C | STANDARD TOOL - HOLDER TOOL FOR WALTER KIDDE ELECTRICAL CONNECTOR | 3 | |
| ST2598C-1 | Standard tool-holder tool for walter kidde electrical connector | 5 | |
| ST2598C-201 | Standard Tool - Holder Tool For Walter Kidde | 3 | |
| ST2613A | STANDARD TOOL-ASSEMBLY TOOLS,737 SLAT DOWNSTOP | 1 | |
| ST2850-334C | STANDARD TOOL - SPANNER NOSE PLIERS | 1 | |
| ST30-8783A-54 | STANDARD TOOL | 2 | |
| ST4130 | BOMBARDIER / CANADAIR EDDY CURRENT SURFACE REFERENCE STANDARD PART 6 55-20-001, NOTCHES .008", .020", .040" (.005" Wide +000 / - .002 and +/- .001" Depth), MATERIAL: 4130 STEEL. Includes certification Report and Certificate of Conformance(COC)... | 1 | |
| ST4330 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 4330 or 4340 STEEL. SIZE: 1.5"W x 3.75"L x .25". Includes certification Rep | 1 | |
| ST4340 | STANDARD, CALIBRATION, NON DEST. TESTING | 5 | |
| ST4340 | STANDARD, CALIBRATION, NON DEST | 5 | |
| ST600-281 | STANDARD TOOL-VENTURI VENT | 1 | |
| ST6760 | STANDARD TOOL - ULTRASONIC LEAK PROBE TOOL | 1 | |
| ST6760A | STANDARD TOOL - ULTRASONIC LEAK PROBE TOOL | 2 | |
| ST7217J | STANDARD TOOL - ALIGNMENT PIN WITH WARNING STREAMER | 1 | |
| ST732 | Standard Tool Cutter - Scotchcal Marking Material | 1 | |
| ST732-190 | STANDARD TOOL CUTTER - SCOTCHCAL MARKING MATERIAL | 2 | |
| ST732-250 | STANDARD TOOL CUTTER - SCOTCHCAL MARKING MATERIAL | 1 | |
| ST732-312 | STANDARD TOOL CUTTER - SCOTCHCAL MARKING MATERIAL | 1 | |
| ST848 | Standard tool-installation tool "O" rings | 15 | |
| ST869EA-700 | Standard tool | 1 | |
| ST8709H | Standard Tool - Go No Go Gauge | 6 | |
| ST8709H-1 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 7 | |
| ST8709H-1 -2 -3 -4 -5 -6 -7 | Standard Tool -Go/No-Go Gauge. For Assembly Of Wiggins Bacc42R Coupling | 1 | |
| ST8709H-2 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-3 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-4 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 8 | |
| ST8709H-5 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-6 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-7 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 6 | |
| ST8709H-KIT | STANDARD TOOL - GO-NO-GO GAGE | 1 | |
| ST8709H-X | Standard Tool - G0 No Go Gauge | 2 | |
| ST8711J | STANDARD TOOL - GAUGE PROTRUSION, HEX DRIVE BOLT WITH LOCKBOLT COLLARS | 1 | |
| ST8711J-6 | Standard Tool - Gage Protrusion, Hex Drive Bolt | 1 | |
| ST8744 | Standard tool leak tracking inb'd wing assy | 1 | |
| ST8783-6 | STANDARD TOOL - ASSEMBLY, PROOF LOAD TEST EQUIPMENT, BACB10FB08GC BEARING INSTALLATION | 1 | |
| ST8783F | STANDARD TOOL - BEARING RETENTION PROOF TEST | 1 | |
| ST8783F-0625-035-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-0687-033-16 | Standard tool bearing retention proof test | 1 | |
| ST8783F-0688-033-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-0750-039-16 | Standard tool bearing retention proof test | 1 | |
| ST8783F-0781-039-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-0906-045-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-0969-054-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-1-1437-075 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-1563-084 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-1912-111 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-2065-111 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-2360-134 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1010-063-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1094-058-1 | Standard tool bearing retention proof test | 3 | |
| ST8783F-1218-068-1 | Standard tool bearing retention proof test | 2 | |
| ST8783F-1437-075-1 | TOOL STANDARD BRG | 1 | |
| ST8783F-1750-075-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1874-140-1 | Standard Tool-Bearing Retention Proof Test | 1 | |
| ST8783F-1899-140-1 | Standard Tool-Bearing Retention Proof Test | 1 | |
| ST8783F-1912-111-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1938-140-1 | Standard Tool-Bearing Retention Proof Test | 1 | |
| ST8783F-2360-134-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-2500-423-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-3000-150-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-812-437-16 | Standard tool bearing retention proof test | 1 | |
| ST878D | Standard Tool - Sleeveset for Presetting BACS13AP Flareless Tube Fittings | 9 | |
| ST8870-1 | Composite Standard, Boeing All PT1 51-04-00:PG21 FIG7 | 4 | |
| ST8870-1 & -4 | GR/EP skin to NOMEX core disdond defect standard GR/EP | 1 | |
| ST8870-1-F | Composite Standard, Boeing All PT1 51-04-00:PG21 FIG7 *Fiberglass skin instead of carbon fiber* | 1 | |
| ST8870-4 | Composite Standard, Boeing All PT1 51-04-00:PG20 FIG6 | 4 | |
| ST8870-4-F | Composite Standard, Boeing All PT1 51-04-00:PG20 FIG6, *Fiberglass skin instead of carbon fiber | 1 | |
| ST8870-7 | Composite Standard, Boeing All PT1 51-04-00:PG19 FIG8 | 4 | |
| ST8870-7,-8,-9 | laminate step thickness standard | 1 | |
| ST8870-8 | Composite Standard, Boeing All PT1 51-04-00:PG19 FIG8 | 5 | |
| ST8870-9 | Composite Standard, Boeing All PT1 51-04-00:PG19 FIG8 | 4 | |
| ST8870B-7 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 1-10 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8870B-8 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 11-20 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8870B-9 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 21-30 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8870C-7 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 1-10 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
| ST8870C-8 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 11-20 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
| ST8870C-9 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 21-30 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
| ST8870D | Alum skin to alum core disbond defect standard | 1 | |
| ST8871 | GR/EP laminate step thickness (tap) standard | 4 | |
| ST8871D | CALIBRATION STANDARD | 4 | |
| ST918A | STANDARD TOOL MANDREL-BEARING-PRESSING BACB10A | 4 | |
| ST918A-1000-1750 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-1000-1875 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1000-1912 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1000-2500 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1180-2064 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1250-2360 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1375-2250 | Standard Tool - Mandrel, Bearing Pressing | 1 | |
| ST918A-1375-2562 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-2572 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-2582 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-2856 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-3500 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1378-2440 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1500-2812 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1500-3125 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1625-2964 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1750-3339 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1771-2952 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-190-500 | Standard Tool | 1 | |
| ST918A-190-625 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-190-777 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-2125-3592 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-605 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-625 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-250-656 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-687 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-250-689 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-250-750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-901 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-2500-3937 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-688 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-689 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-3000-5000 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-312-1250 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-312-750 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-312-781 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-312-783 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-312-812 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-375-1500 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-375-500 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-375-875 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-375-876 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-375-906 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-437-906 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-500-1000 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-500-1065 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1094 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1095 | STANDARD TOOL MANDREL, BEARING, PRESSING BACB10A | 1 | |
| ST918A-500-1687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-562-1187 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-562-1188 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-625-1062 | Standard Tool | 1 | |
| ST918A-625-1125 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-625-1187 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-625-1687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1437 | TOOL STANDARD BRG | 3 | |
| ST918A-750-1625 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1937 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918B-3-500-1687 | Standard tool mandrel bearing pressing BACB10B | 1 | |
| ST918C-250-901 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-312-1250 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-500-1625 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-625-1375 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-625-1937 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918D-750-1250-620 | Standard tool mandrel-bearing pressing BAC-B10D | 1 | |
| ST919 | STANDARD TOOL SUPPORT BEARING INSTALL | 3 | |
| ST919-1062 | Standard Tool | 1 | |
| ST919-1250 | Standard tool support bearing install | 3 | |
| ST919-1750 | Standard tool support bearing install | 1 | |
| ST919-1937 | Standard tool support bearing install | 1 | |
| ST919-625 | Standard tool support bearing install | 1 | |
| ST919-812 | Standard tool support bearing install | 1 | |
| ST919-875 | Standard tool support bearing install | 1 | |
| ST919-901 | Standard tool support bearing install | 4 | |
| ST920 | Standard tool mandrel nas press fit bushing installation tool | 1 | |
| ST921MA-4-8-22-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-4-28-ALL-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-5-31-ALL-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-6-33-ALL-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-8-22-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-9-22-ALL | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MB | STANDARD TOOL - STRAIGHT SLEEVE | 1 | |
| ST922C-4 | Standard tool staking tool 1/4" bushing BACB28B-4 | 1 | |
| ST922C-5 | Standard tool staking tool 5/16 bushing BACB28B-5 | 2 | |
| ST922C-6 | Standard tool staking tool 3/8" bushing BACB28B-6 | 2 | |
| ST925-1771-2952 | Standard tool point staking tool bearing retention | 4 | |
| ST925-250-750 | Standard tool point staking tool bearing retention | 2 | |
| ST925-250-901 | Standard tool point staking tool bearing retention | 4 | |
| ST925-625-1062 | Standard Tool | 1 | |
| ST926B-601B | Standard tool roller staking tool-portable hand operated | 1 | |
| ST926C-1375-2250-2127 | Standard Tool - Roller Staking Tool | 2 | |
| ST926C-500-1218-1093 | Standard tool roller staking tool | 2 | |
| ST926C-750-1937-1809 | Standard tool roller staking tool | 1 | |
| ST926G | STANDARD TOOL - BEARING REMOVE/INSTALL/SWAGE, BEARING WITH GROOVE 0.500 TO 1.250-INCH RACE SWAGE (TYPE III) | 1 | |
| ST926G-1.75-.750-1.000-1.625 | BEARING REMOVE / INSTALL / SWAGE STANDARD TOOL | 1 | |
| ST927AA-1 | STANDARD TOOL - BACB10CN3 BEARING REMOVAL TOOL | 1 | |
| ST927AA-2 | STANDARD TOOL - BACB10AG4MC BEARING REMOVAL TOOL | 1 | |
| ST927C | STANDARD TOOL - BEARING REMOVAL TOOL | 4 | |
| ST927C-10 | Standard tool-bearing removal tool | 5 | |
| ST927C-108 | Standard tool-bearing removal tool | 1 | |
| ST927C-11 | Standard tool-bearing removal tool | 4 | |
| ST927C-114 | Standard Tool - Bearing removal | 1 | |
| ST927C-136 | Standard tool-bearing removal tool | 4 | |
| ST927C-139 | Standard tool-bearing removal tool | 5 | |
| ST927C-142 | Standard tool-bearing removal tool | 4 | |
| ST927C-20 | Standard tool-bearing removal tool | 1 | |
| ST927C-5 | Standard tool-bearing removal tool | 5 | |
| ST927C-81 | Standard tool-bearing removal tool | 4 | |
| ST927J | STANDARD TOOL - HOLE SAW, BEARING REMOVAL | 1 | |
| ST928 | STANDARD TOOL - ROLLER STAKING TOOL, ALUMINUM SLEEVE | 1 | |
| ST928-A | STANDARD TOOL - ROLLER SWAGING, ALUMINUM SLEEVE 69-38919 | 1 | |
| ST928D | Standard tool-roller swage，bearing sleeve | 1 | |
| ST928G | STANDARD TOOL - ROLLER SWAGING ACCESSORIES FOR ST928 | 1 | |
| ST928H | STANDARD TOOL - BEARING REMOVE/INSTALL/SWAGE, SLEEVE OUTSIDE DIAMETER 1.33 THRU 2.25-INCH SLEEVE TYPE | 1 | |
| ST929-1A | STANDARD TOOL - ROLLER SWAGING SLEEVE BEARING | 1 | |
| ST929-1A-1250-2000 | Standard tool-roller swage sleeve bearing | 1 | |
| ST929-1A-250-901 | Standard tool-roller swage sleeve bearing | 1 | |
| ST929-2A | STANDARD TOOL.BEARING SLEEVE.STAKING TOOL 3 POIINT | 1 | |
| ST929-2A-2000-1250 | Standard tool bearing sleeve staking tool 3 point | 1 | |
| ST929-2A-3500-1375 | Standard tool bearing sleeve staking tool 3 point | 1 | |
| ST929-2A-4800-2500 | Standard tool bearing sleeve staking tool 3 point | 1 | |
| ST929-2A-5000-3000 | Standard tool bearing sleeve staking tool 3 point | 1 | |
| ST929-2C | STANDARD TOOL STAKING TOOL BEAKING SLEEVE.6 POINT. | 1 | |
| ST929-2C-250-750-28 | Standard tool | 1 | |
| ST929-2C-250-750-281 | Standard tool | 1 | |
| ST929H | STANDARD TOOL-BEARING REMOVAL/INSTALL/SWAGE.SLEEVE | 1 | |
| ST930-LT-375-906-801 | Standard tool load test-bearing BAC 5435 | 1 | |
| ST930C | STANDARD TOOL - ANVIL SWAGING TOOL | 1 | |
| ST930C-250-656-1 | Standard tool-anvil swaging tool | 4 | |
| ST930C-250-687-1 | Standard tool-anvil swaging tool | 3 | |
| ST930C-250-688-1 | Standard tool-anvil swaging tool | 1 | |
| ST930C-250-689-1 | Standard tool-anvil swaging tool | 2 | |
| ST931 | STANDARD TOOL - BALL POINT MULTIPLE - BEARING STAKING TOOL | 1 | |
| ST931-1000-1750 | Standard tool | 1 | |
| ST931-190-500 | Standard tool,ball point multiple-bearing starking tool | 1 | |
| ST931-250-625 | Standard tool | 1 | |
| ST931-250-750 | Standard tool,ball point multiple-bearing starking tool | 2 | |
| ST931-375-875 | Standard tool | 1 | |
| ST931-625-1937 | Standard tool | 1 | |
| ST931D-250-625 | Standard tool | 1 | |
| ST932-750-1187-1-2 | Standard Tool | 1 | |
| ST932-750-1375-1-2 | STANDARD TOOL | 1 | |
| ST932-C-235 | Standard Tool | 1 | |
| ST932-C-297 | Standard Tool | 1 | |
| ST933-2250-1250 | Standard tool swagong tool housing bearing ring lock | 1 | |
| ST937D-1 | STANDARD TOOL - ANVIL SWAGE NACELLE SUPPORT FITTINGS | 1 | |
| ST9501B | STANDARD TOOL -0 ALIGNMENT PIN | 2 | |
| ST9503-1 | Standard Tool - Universal Flap Peen Tool Kit | 1 | |
| ST982L-9 | Standard tool-scraper：sealant not for use on clad aluminum | 5 | |
| ST982LF-9 | Standard tool-scraper：sealant not for use on clad aluminum | 4 | |
| ST990-A | Standard tool | 1 | |
| ST991A | Standard tool-wedge seal installation | 5 | |
| ST991A-2 | STANDARD TOOL - REMOVAL TOOL, SCRIVET FASTENER | 8 | |
| ST991A-2-250 | STANDARD TOOL - REMOVAL TOOL，SCRIVET FASTENERS AND BACB31 SLEEVE BOLTS | 10 | |
| ST991A-2-312 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 4 | |
| ST991A-2-375 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-438 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-500 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-563 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-625 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-750 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-875 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991NB-1 | Standard tool-spreader，sealant application | 1 | |
| ST9999-VBA-201 | Standard tool-vacuum generator multiple venturi | 4 | |
| ST9999-VBA-301 | STANDARD TOOL VACUUM | 2 | |
| ST9999ART | Standard tool-aerostrip removal tool | 2 | |
| ST9999CL | STANDARD TOOL COWL LATCHING | 4 | |
| ST9999CL-1 | Standard Tool, Cowl Latching Assy | 1 | |
| ST9999CL-201 | STANDARD TOOL - COWL LATCHING ASSEMBLY, ENGINE COWL FAN | 4 | |
| STANDARD-B | 2/64" FLAT BOTTOM HOLE EQUIVALENT SURFACE NOTCH STANDARD (*ABOVE DESCRIPTION MUST BE ENGRAVED ON THE REFERENCE STANDARD) ..DRAWING "B" (PS21211.3 FOR F/A-18 OUTER WING FORWARD SPAR) MATERIAL=7075-T6 | 1 | |
| STANDARD-C | MIL-STD-2154A, STANDARD ULTRASONIC TEST BLOCK FOR AGNLE BEAM EXAMINATION, 7075-t6 | 1 | |
| STD-00107021 | Avcon Industries LFEC Calibration Reference Standard. BNC Document: 00107021, Rev. B Figure 7 Page 22. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| STD-1--AL | Custom Radius Channel Standard Material: 7075-T651 ALUMINUM. Standard to include a total of 62 EDM flaws identified as A, B,C, D, E, and F in the drawing. Includes test report traceable to NIST standards which comply with MIL-Q-9858A, Mil-4-45208A. | 1 | |
| STD-1-TI | Custom Radius Channel Standard Material: 6AL-4V Titanium. Standard to include a total of 62 EDM flaws identified as A, B,C, D, E, and F in the drawing. Includes test report traceable to NIST standards which comply with MIL-Q-9858A, Mil-4-45208A. | 1 | |
| STD-1242 | HAMMER - STANDARD | 1 | |
| STD-6760 | WRENCH STANDARD 5/8 INCH | 1 | |
| STD-7111 | ADAPTER - HEX WRENCH, 0.25-INCH HEX TO 0.375IN SQUARE DRIVE, STANDARD | 1 | |
| STD-CAL-1 | STD-CAL-1;1yr. Renewal Standard Term Calibration Contract - Existing Equipment | 1 | |
| STD-REPAIR-AGREEMENT | STD-REPAIR-AGREEMENT;Standard repair charges for Key Account Repair/Frame Agreement | 1 | |
| STD320 | REFERENCE STANDARD | 1 | |
| STD326 | REFERENCE STANDARD | 1 | |
| STDA3 | ALUMINUM A3 CERTIFIED COATED METAL PLATES STANDARD | 1 | |
| STI3022 | BOX MECHANICAL STANDARD TOOLS | 1 | |
| STI3022B | BOX MECHANICAL, STANDARD TOOLS (SNAP-ON) | 1 | |
| STI3217 | STANDARD TOOLS (SNAP-ON) BOX MECHANICAL | 1 | |
| STI3218 | STANDARD TOOLS BOX ELECTROAVIONIC | 1 | |
| STI3219 | BOX REPAIR, STANDARD TOOLS | 1 | |
| STR/146/RIT/5089 | BAE 146-RJ SERIES REFERENCE STANDARD 53-20-26 PT 6 FIGURE 6&7 PAGES 12&13. Includes Test Report and Certificate of Conformance. | 1 | |
| STR/146/RP/5139 | BAE 146-RJ SERIES REFERENCE STANDARD 57-55-09 PT 6 FIGURE 6&7 PAGES 12&13. Includes Test Report and Certificate of Conformance. | 1 | |
| ST‐03‐65 | STANDARD SOCKET 1" | 1 | |
| SUC-169 | STANDARD CONTACT TRANSDUCER | 2 | |
| SUC169 | STANDARD CONTACT TRA | 2 | |
| SUS921L | STANDARD TOOL - BUCKING BAR | 2 | |
| SW1-000 | CANOPY COVER (STANDARD CANOPY) | 1 | |
| SW1-020 | EXTENDED CANOPY COVER (STANDARD CANOPY) | 1 | |
| SW1-800 | TRAVEL COVER, Light Weight Canopy Cover (STANDARD CANOPY) | 1 | |
| SW121A | SOCKET, SHALLOW 1/2" DRIVE STANDARD 3/8" | 3 | |
| SW141A | SOCKET, SHALLOW 1/2" DRIVE STANDARD 7/16" | 2 | |
| SW161A | SOCKET, SHALLOW 1/2" DRIVE STANDARD 1/2" | 2 | |
| SW181A | SOCKET, SHALLOW 1/2" DRIVE STANDARD 9/6" | 2 | |
| SW421 | SOCKET STANDARD | 4 | |
| SW441 | SOCKET STANDARD | 3 | |
| SWEEF1 | REFERENCE STANDARD | 1 | |
| SWERF1 | REFERENCE STANDARD | 1 | |
| SWREF 1 | Reference Standard | 2 | |
| SWREF1 | REFERENCE STANDARD | 2 | |
| SZD-004 | CANOPY/NOSE COVER, 48-3 Jantar Standard 3, all year use | 1 | |
| Stackable Standard | Set of 4 standards, 2024T3 Plates, 0.040", 0.063", 0.068", 0.071", 0.100" | 1 | |
| T-10032 | STANDARD INSULATOR 5 PACK | 1 | |
| T-401-4-50 | STANDARD NOZZLE | 1 | |
| T-4102-C | MICROLAMBERT TEST STANDARD | 1 | |
| T-710-DIA-UPS | HAND TRUCK; STANDARD PLATFORM 1000 LB. CAPACITY | 1 | |
| T-LST50588 | SCREW PITCH GAGE STANDARD | 1 | |
| T-TL610 | 4WAY VALVE TOOL STANDARDE BORE | 1 | |
| T.53.03 | SHORTS REFERENCE STANDARD Shorts SD 3-30, 53 pages 3-8. Material: 2024-T3 or 2014 AluminumIncludes Test Report and Certificate of Conformance. | 1 | |
| T0WA320S20RH1TY | STANDARD TOW-BAR (A320F INCL. NEO) | 2 | |
| T16AL4V | SURFACE STANDARD | 1 | |
| T2024-T6 BLOCK | BOLT HOLE STANDARD 1/8, 3/16, 5/32 | 1 | |
| T321767 | LIGHTING STANDARD | 1 | |
| T321776 | LIGHTING STANDARD | 1 | |
| T321837 | LIGHTING STANDARD | 1 | |
| T321839 | LIGHTING STANDARD | 1 | |
| T321841 | LIGHTING STANDARD | 1 | |
| T321981 | LIGHTING STANDARD | 1 | |
| T322000 | LIGHTING STANDARD | 1 | |
| T322023 | LIGHTING STANDARD | 1 | |
| T322024-1 | LIGHTING STANDARD | 1 | |
| T322024-2 | LIGHTING STANDARD | 1 | |
| T322051 | LIGHTING STANDARD | 1 | |
| T322700 | LIGHTING STANDARD | 1 | |
| T322886 | LIGHTING STANDARD | 1 | |
| T323022 | LIGHTING STANDARD | 1 | |
| T34-210 | WING COVERS (STANDARD MODELS), WINTER USE (set of 2) | 1 | |
| T34-215 | WING COVERS (STANDARD MODELS), ALL YEAR USE (set of 2) | 1 | |
| T3A1 | SHRINK JAW ASSEMBLY STANDARD | 1 | |
| T3A2 | JAWS UPPER STANDARD RADIUS | 1 | |
| T3B1 | STRETCH JAW ASSEMBLY STANDARD | 1 | |
| T3B2 | JAWS LOWER STANDARD RADIUS | 1 | |
| T5-2002-101-00 | TENSIOMETER STANDARD GRIP | 23 | |
| T72 | RATCHET, SEALED HEAD (HIGH STRENGTH), STANDARD HANDLE, 4 7/16" | 2 | |
| T72FOD | 1/4" DRIVE DUAL 80® TECHNOLOGY STANDARD HANDLE FOREIGN OBJECT DAMAGE RATCHET | 2 | |
| TB 7150-1 | STANDARD BLOCK | 1 | |
| TB-16 | NORTEC EDDY CURRENT STANDARD | 1 | |
| TB-AL | REF. STANDARD | 1 | |
| TB-S1 | STANDARD, TB-S1 7075-T6 | 1 | |
| TB1065-4 | REFF STANDARD (V2 BLOCK) | 1 | |
| TB2-DWDMOCC-P0 | TB2-DWDMOCC-P0;T-BERD 2000 DWDM channel checker standard package | 1 | |
| TB2-OTDR-2WLA-ENC | TB2-OTDR-2WLA-ENC;T-BERD 2000 OTDR 1310/1550 Standard Pkg with Power Meter; VFL - ENCORE | 1 | |
| TB5939-4 | REFERENCE STANDARD V1 - ALUMINIO | 1 | |
| TC4 | STANDARD CONTACT TRANSDUCER | 1 | |
| TC4-255S | STANDARD CONTACT TRA | 2 | |
| TC7829 | STAHLWILLE TOOL BOX LINE AVIONICS OR EQUIVALENT STANDARD AVIONICS TOOL BOX | 1 | |
| TEK-.00/.07-6AL4V | Tapered Standard, 3.5 x 1.5 x .25" thick 6AL-4V, .000, .010, .020, .030, .040, .050, .060, .070 deep tapered notch | 1 | |
| TEK-1538-ECRS | C-130 Main Landing Gear Torque Strut, Standard | 1 | |
| TEK-1538-UTRS | UT Reference standard, 4130 Steel | 1 | |
| TEK-1570-STD-1-11.5P | Threaded Probe Standard | 1 | |
| TEK-1570-STD-1/2-14P | Threaded Probe Standard | 1 | |
| TEK-1570-STD-3/4-14P | Threaded Probe Standard | 1 | |
| TEK-1570-STD-3/4-18S | Threaded Probe Standard | 1 | |
| TEK-186-2024T3-12 | 12 Hole Reference Standard Similar to Boeing 186, 3/16" to 3/4", with .030" corner and .020" corner notches on the bottom plate, .040 Long x .020 Deep Midwall Notches on the top plate. 2024-T3 | 1 | |
| TEK-3038 | Special Hole Probe, 25KHz, Counterbore Interface Centered Coil, For 737 Strut Lower Chord Standard | 1 | |
| TEK-3560B | CORROSION REFERENCE STANDARD | 1 | |
| TEK-5050-767 | Transducer Kit includes TEK-5050-1 Thru -6 for NDT6025-1 thru -6 standards | 1 | |
| TEK-5129-T-2 | REFERENCE STANDARDS | 1 | |
| TEK-5154 | CUSTOM 2 ELEMENT RING TRANSDUCER FOR BORE HOLE INSPECTION WITH BOEING REFERENCE STANDARD 55-10-13 PAGE 9 FIGURE 2. TWO MICRODOT CONNECTORS "A" AND "B" | 1 | |
| TEK-6007 | Reference Standard, Sliding Probe Type, SPO-3932 | 1 | |
| TEK-6034C | Flat Standard with Radius Notch, Cast Aluminum, per ABS PT3 32-42-05 PG15:PROC1 FIG11 | 1 | |
| TEK-6034CB | Flat Standard with Radius Notch, Copper Bronze per ABS PT3 32-42-05 PG15 PROC 1 FIG 11 | 1 | |
| TEK-6034F | Flat Standard with Radius Notch, Forged Aluminum, per ABS PT3 32-42-05 PG15:PROC1 FIG11 | 1 | |
| TEK-6034M | Flat Standard with Radius Notch, Magnesium, per ABS PT3 32-42-05 PG15:PROC1 FIG11 | 1 | |
| TEK-6187-1A | Hole Standard, 6 holes from .187 to .500, Based on NDT1016 thru NDT1021 series std, 7075T6 | 1 | |
| TEK-6187-1T | Hole Standard, 6 holes from .187 to .500, Based on NDT1022 thru NDT1027 series std, 6AL-4V | 1 | |
| TEK-6187-2A | Hole Standard, 5 holes from .500 to 1.00 x .125 Inc., Based on 1016 series std, 7075T6 | 1 | |
| TEK-6187-3A | Hole Standard, 17 holes from .156 to 1.00 x .062 Inc., Based on 1016 series std, 7075T6 | 1 | |
| TEK-6187-3S | Hole Standard, 17 holes from .156 to 1.00 x .062 Inc., Based on 1040 series std, 4340 Steel | 1 | |
| TEK-6187-3T | Hole Standard, 17 holes from .156 to 1.00 x .062 Inc., Based on 1022 series std, 6AL4V Titanium | 1 | |
| TEK-6187-4A | Hole Standard, 13 holes from Ø9/64 to Ø3/8, Based on 1016 series std, 7075T6 | 1 | |
| TEK-6200-A | Hole Standard, 20 Holes 5/32" to 3/4", with Countersinks, .020" thru Notch at CS to Fay, .030" corner in top plate, 7075T6 Aluminum | 1 | |
| TEK-6200-S | Hole Standard, 20 Holes 5/32" to 3/4", with Countersinks, .020" thru Notch at CS to fay, .030" corner in top plate, 4340 | 1 | |
| TEK-6200-T | Hole Standard, 20 Holes 5/32" to 3/4", with Countersinks, .020" thru Notch at CS to fay, .030" corner in top plate, T6AL4V | 1 | |
| TEK-6220-ST | 12 Hole Standard Top Row 4.76mm, 6.35mm, 7.93m, 9.52m, 11.11mm, 12.7mm without defect, Bottom Row 4.76mm, 6.35mm, 7.93m, 9.52m, 11.11mm, 12.7mm with .5mm hole at the center, 4340 | 1 | |
| TEK-6220-TI | 12 Hole Standard Top Row 4.76mm, 6.35mm, 7.93m, 9.52m, 11.11mm, 12.7mm without defect, Bottom Row 4.76mm, 6.35mm, 7.93m, 9.52m, 11.11mm, 12.7mm .. with .5mm hole at the center, 6AL-4V | 1 | |
| TEK-6382 | REFERENCE STANDARD | 1 | |
| TEK-6801 | Standard for Bond Master | 1 | |
| TEK-6802 | Standard for Bond Master | 1 | |
| TEK-6805 | GR/EP Laminate Standard with 3 inner ply defects, Thickness: 2.4mm, 150mm x 250mm | 1 | |
| TEK-767-3 | CALIBRATION REFERENCE STANDARD | 1 | |
| TEK-9087L | 5 MHZ SURFACEWAVE TRANSDUCER, REFERENCE STANDARD NDT3310, LEFT SOUND DIRECTION | 1 | |
| TEK-9087R | 5 MHZ SURFACEWAVE TRANSDUCER, REFERENCE STANDARD NDT3310, RIGHT SOUND DIRECTION | 1 | |
| TEK-9117 | CRACK STANDARD-EDDY CURRENT 1ST STAGE FAN BLADE | 1 | |
| TEK-SF-2024T8 | MD Spotface Reference Standard 06-20-01 Pg F25, .016" 2024-T8 Clad | 1 | |
| TEK-SGP-004 | GE CF6-80 Standard, PT6 72-53-00 PG9 FIG 1, Inconel 718 2" x 2" x .25" thick, .500 long x .026 deep x .007 wide notch | 1 | |
| TEK-SWREF1 | Composite Standard; R&D | 1 | |
| TEK810 | TECNAM REFERENCE STANDARD | 1 | |
| TEK812 | REFERENCE STANDARD TECNAM | 1 | |
| TEK814-A | TECNAM REFERENCE STANDARD | 1 | |
| TEK814-B | TECNAM REFERENCE STANDARD | 1 | |
| TEKIT-001 | M7 Standard, SA227 EC Cal Standard, Pattern 2 & 3/SB CC7-53-006/TEK-5566, TEK-5565, TEK-5568, MFLX-8, MFLXR-6, NDT001, TEK-7016-1, TEK-7016-2, TEK-7016-3A, TEK-7016-3B, BN-M6 | 1 | |
| TEKIT-1011 | Surface EC Inspection Kit, Includes; TEK-6064 Standard, TX5PEN95-6/1M, 1150 Pelican Case w/foam & N16-T6-B Cable | 1 | |
| TEKIT-396 | Boeing Reference Standards, 737 PT6 53-30-44, PG7 FIG 2, Kit includes NDT396-36/36, NDT396-40/40, NDT396-45/40, NDT396-50/40, NDT396-56/40, Pelican case 1150 | 1 | |
| TEKIT-5050-767 | TRANSDUCER KIT INCLUDES TEK-5050-1 THRU -6 FOR NDT6025-1 THRU -6 STANDARDS | 1 | |
| TEKIT-5059 | STANDARD-757 PYLON BULKHEAD | 2 | |
| TEk-5838 | Transducer for standard 787-9-HS-9 | 1 | |
| TFY72 | STANDARD HANDLE HI-LOCK FLEX HEAD | 2 | |
| TFY936 | RATCHET, HY-LOK, STANDARD HANDLE, 4 7/16IN | 3 | |
| TGUA026 | Bowers TGUA026 Universal Standard Contact Mounting Arms (Pair) | 1 | |
| THICKNESS MEASUREMENT-2024-T3 | Calibration Standard, Embraer 170 PART 1 51-00-00 PG 7,2024-T3 | 1 | |
| THICKNESS MEASUREMENT-6013-T4 | Calibration Standard, Embraer 170 PART 1 51-00-00 PG 7,6013-T4 | 1 | |
| THICKNESS MEASUREMENT-7050-T7 | Calibration Standard, Embraer 170 PART 1 51-00-00 PG 7, 7050-T7 | 1 | |
| THR72 | STANDARD HANDLE QUICK-RELEASE RATCHET | 1 | |
| THXB1214A- | WRENCH,BOXSTANDARD LG 10DEG OFFSET,3/8 X 7/16IN,12-PT | 1 | |
| THXB1618A | WRENCH,BOX,STANDARD LG 10DEG OFFSET 1/2 X 9/16IN,12-PT | 1 | |
| THXB2022A | WRENCH,BOX,STANDARD LG 10DEG OFFSET 5/8 X 11/16IN,12-PT | 1 | |
| THXB2426A | WRENCH,BOX,STANDARD LG 10DEG OFFSET 3/4 X 13/16IN,12-PT | 1 | |
| THXB2830A | WRENCH,BOX STANDARD LG,10DEG OFFSET 7/8 X 15/16IN,12-PT | 1 | |
| THXB3234A- | WRENCH,BOX,STANDARD LG 10DEG OFFSET 1 X 1-1/16IN,12-PT | 1 | |
| TI-6AI-6V-2SN | CALIBRATION REFERENCE STANDARD | 1 | |
| TI-6AL-4V | Surface Standard, .008", .020", .040" +/- .001 Deep Notches .005 Max Width | 3 | |
| TI-6AL-6V-2SN | TITANIUM STANDARD TI-6AL-6V-2SN BAMS 514-002 ...00 | 3 | |
| TL-2243 | MRI NON MAGNETIC SIEMENS 32 PIECE STANDARD TOOL KIT | 1 | |
| TM10G | BREAKER BAR, STANDARD HANDLE,¼” DRIVE, LENGTH 6” | 5 | |
| TM4CSA | Driver, Standard Shank, 1/4" female square drive in handle, 6" | 1 | |
| TM830 | STANDARD RATCHET | 1 | |
| TMA2-5E | (TMA2.5E) SOCKET DRIVER, HEX, STANDARD, 5/64 | 2 | |
| TMA2.5E | STANDARD HEX SOCKET DRIVER | 2 | |
| TMA2E2 | Bit, Hex, Standard, 1/16in | 1 | |
| TMA3E | STANDARD HEX SOCKET DRIVER | 2 | |
| TMA4E2 | BIT, HEX, STANDARD, 1/8IN | 1 | |
| TMA5E | 1/4" DRIVE SAE 5/32" STANDARD HEX SOCKET DRIVER (SNAP-ON) | 2 | |
| TMA7E | STANDARD HEX SOCKET DRIVER | 2 | |
| TMA8E | STANDARD HEX SOCKET DRIVER 1/4 | 2 | |
| TMAB4(5E) | BALL HEX/STANDARD INCHES- 9/64'' | 1 | |
| TMAB5E | BALL HEX/STANDARD INCHES | 1 | |
| TMAM3E | 1/4" DRIVE METRIC 3 MM STANDARD HEX BIT SOCKET DRIVER | 1 | |
| TMD05 | SOCKET STANDARD | 1 | |
| TMD10 | 1/4" DRIVE STANDARD SOCKET 5/16" | 3 | |
| TMD11 | 1/4" DRIVE STANDARD SOCKET 11/32" | 4 | |
| TMD12 | 1/4" DRIVE STANDARD SOCKET 3/8" | 4 | |
| TMD14 | 1/4" DRIVE STANDARD SOCKET 7/16" | 4 | |
| TMD16 | 1/4" DRIVE STANDARD SOCKET 1/2" | 3 | |
| TMD18 | 1/4" DRIVE STANDARD SOCKET 9/16" | 4 | |
| TMD6 | 1/4" DRIVE STANDARD SOCKET 3/16" | 3 | |
| TMD7 | 1/4" DRIVE STANDARD SOCKET 7/32" | 3 | |
| TMD8 | 1/4" DRIVE STANDARD SOCKET 1/4" | 5 | |
| TMD9 | 1/4" DRIVE STANDARD SOCKET 9/32" | 3 | |
| TMP12E | 1/4" DRIVE #1 PHILLIPS STANDARD SOCKET DRIVER | 2 | |
| TMP22E | 1/4" DRIVE #2 PHILLIPS STANDARD SOCKET DRIVER | 3 | |
| TOOL BOX | STAHLWILLE TOOL BOX LINE AVIONICS OR EQUIVALENT STANDARD AVIONICS TOOL BOX | 1 | |
| TOOLA01 | STANDARD TOOL | 1 | |
| TOOLBOX STANDARD | TOOLBOX STANDARD | 1 | |
| TOV 917509 | CALIBRATION STANDARD | 1 | |
| TOWA320S | STANDARD TOW-BAR (A320F INCL. NEO) | 1 | |
| TOWA320S20RH1_TY | STANDARD TOW-BAR (A320F INCL. NEO) | 2 | |
| TOWA345S | TWO BAR STANDARD SERIES | 1 | |
| TOWB737-S | TOWBAR STANDARD | 1 | |
| TOWB737S20SH1 | TOWBAR STANDARD | 1 | |
| TP-126 | Boeing reference standard; 51-00-00 | 1 | |
| TP-7075-T6 | Reference Standard | 1 | |
| TP-79-04-1 | REFERENCE STANDARD, ALUMINIUM | 1 | |
| TP54 | AIRBUS REFERENCE STANDARD A318-A321 51-63-07-PB1, PAGE 2 SHEET 01. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| TP54-02-01 | REFERENCE STANDARD | 1 | |
| TP54-02-1 | AIRBUS REFERENCE STANDARD, NTM 53-41-86, A300-600 PT 6 51-10-01, A318-A321 51-63-07-PB1, PAGE 2 SHEET 01. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| TP54-07-1 | AIRBUS SPLIT CALIBRATION REFERENCE STANDARD A318-A321 51-63-07-991-002 PB1. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 2 | |
| TPMA12 | 12FT STANDARD TAPE MEASURE | 3 | |
| TPMA25 | 25FT STANDARD TAPE MEASURE | 1 | |
| TQS050FUA | TORQOMETER(R), Torque Driver, U.S., Standard Follow-up, 96 in. oz./6 in. lb. | 3 | |
| TQS2FUA | TORQOMETER(R), Torque Driver, U.S., Standard Follow-up, 384 in. oz./24 in. lb. | 1 | |
| TR72 | STANDARD HANDLE QUICK-RELEASE RATCHET | 4 | |
| TRDS-12 | STANDARD DELAY | 1 | |
| TRS-6-10A | THICKNESS REFERENCE STANDARD, 6 STEP ALUMINUM | 1 | |
| TS500 | TEST SET - UNDERWATER LOCATOR BEACON, LOW FREQUENCY (LF-ULB) AND STANDARD FREQUENCY ULB^T1 | 18 | |
| TSD01106 | STANDARD SINGLE ROD IMMERSION THERMOSTAT, 5-80'C, STEM LENGTH 11" - COTHERM | 1 | |
| TT-ONXDSL-TDR-TEST-SP | TT-ONXDSL-TDR-TEST-SP;Self-Paced - ONX-580 TDR Testing in Standard Mode - 22 minutes | 1 | |
| TTX30E | 1/4" DRIVE TORX® T30 STANDARD BIT SOCKET | 1 | |
| TY72 | STANDARD HANDLE HI-LOCK | 2 | |
| TYPE LS-2 | GENERAL ELECTRIC HALOGEN LEAK TEST STANDARD | 1 | |
| TZ72 | Ratchet Sealed Head (High Strength), Standard Handle, 4 7/16" | 1 | |
| Ti-6AL-6V-2sn | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: TI-6AL-6V-2SN TITANIUM. SIZE: 1.5"W x 3.75"L x .25" | 3 | |
| Ti-6Al-6V-2Sn | Titanium Standard Ti-6AL-6V-2SN, BAMS 514-002 ...008, .020, .040 surface notches | 3 | |
| U8010011 | S-MP-3 MECHANICAL IMPEDANCE ANALYSIS PROBE, STANDARD, RIGHT ANGLE PROBE, .5 IN. TIP DIAMETER (CAN BE | 1 | |
| U8330115 | Standard Phased Array Probe 10L32-9.9X7-A1-P-2.5-OM-TOP (NDT) | 1 | |
| U8330134 | Standard Phased Array Probe 5L64-64X7-NW1-P-2.5-OM (NDT) | 1 | |
| U8626006 | SURFACE PROBE, POWERLINK STANDARD BRIDGE DETACHABLE SURFACE PROBE WITH A DIAMETER OF .62 IN. (15.7 M | 1 | |
| U8700265 | STANDARD WEDGE SNW1-0L-IHC (NDT) | 2 | |
| U8720002 | STANDARD WEDGE | 1 | |
| U8720006 | STANDARD WEDGE | 1 | |
| U8720008 | WEDGE STANDARD (NDT) | 1 | |
| U8720036 | SA1-N60S Standard Wedge | 1 | |
| U8720159 | SA5-0L STANDARD WEDGE | 1 | |
| U8720163 | SA5-N45S Standard Wedge | 1 | |
| U8720169 | SA5-N60S Standard Wedge | 1 | |
| U8770054 | DLH-1 : Standard Delay. Polyst | 1 | |
| U8770069 | DLH-3 : Standard Polystyrene D | 1 | |
| U8770335 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 | |
| U8800349 | CABLE, STANDARD LEMO TO MICRODOT, 6FT RG-174 | 1 | |
| U880349 | LCM-74-6 CABLE STANDARD LEMO TO MICRODOT 6FT | 1 | |
| U8860192 | Reference standard 99A53003001104 | 1 | |
| U8860211 | USAF General purpose ET standard | 1 | |
| U8860370 | Reference standard ANDT-1053 | 1 | |
| U8860407 | ALUMINUM (7075-T6) MULTI-HOLE REFERENCE STANDARD WITH CERTIFICATE TRACEABLE TO NIST | 1 | |
| U8860545 | MAGNESIUM CRACK STANDARD | 1 | |
| U8860576 | REFERENCE STANDARD | 1 | |
| U8860842 | Boeing reference standard, NDT-398 | 1 | |
| U8861629 | ALUMINIUM CONDUCTIVITY STANDARD | 1 | |
| U8861822 | REFERENCE STANDARD | 1 | |
| U8861881 | CREF2-1742 REFEREBCE STANDARD | 1 | |
| U8861902 | CONDUCTIVITY STANDARD SET | 1 | |
| U8861924 | CONDUCTIVITY STANDARD | 1 | |
| U8861929 | CONDUCTIVITY STANDARD CREF5-04174559100 | 1 | |
| U8880111 | CONDUCTIVITY STANDARD BLOCK | 1 | |
| UEXT0001 | Bowers UEXT0001 Ultima Standard Extension Length 100mm To Fit Heads 12-20mm | 1 | |
| UEXT0002 | Bowers UEXT0002 Ultima Standard Extension Length 150mm To Fit Heads 20-50mm | 1 | |
| UEXT0004 | Bowers UEXT0004 Ultima Standard Extension Length 150mm To Fit Heads 50mm Plus | 1 | |
| UEXT0200 | Bowers UEXT0200 Ultima Standard Extension Length 63mm To Fit Heads 6-10mm | 1 | |
| UEXT0300 | Bowers UEXT0300 Ultima Standard Extension Length 75mm To Fit Heads 10-12mm | 1 | |
| UFEDIIB-PKG-1 | UFEDIIB-PKG-1;UFEDIIb Package with Standard Accessories | 1 | |
| UK-1 | STANDARD U KIT (ULTRASONIC TESTING) | 1 | |
| URY.125-.156 | REFERENCE STANDARD | 1 | |
| URY.156-.187 | REFERENCE STANDARD | 1 | |
| USM25 | STANDARD TOOL | 1 | |
| UT-010-057 | BHTI REFERENCE STANDARD | 1 | |
| UT-2370 | CALIBRATION STANDARD | 1 | |
| UT-PHT-CALBLK1.A | CALIBRATION STANDARD (K1) ALUMINIUM | 1 | |
| UT-PHT-CALBLK1.CS | CALIBRATION STANDARD (K1) STEEL | 1 | |
| UT-PHT-CALBLK1.SS | CALIBRATION STANDARD (K1) STAINLESS STEEL | 1 | |
| UT-PHT-CALBLK2.1/8.CS | CALIBRATION STANDARD | 1 | |
| UT-RC-5S-CASE | 5 -STEP CALIBRATION BLOCK, WOOD CASE FOR STANDARD INCH VERSION, CUSTOM INCH VERSION C2 AND METRIC A | 1 | |
| UT7005-48 | INDEX BUSHING, NON-ANSI STANDARDS TOLERANCES 1/4 X 3/8 X 1/2 | 1 | |
| UV-LC-PRO-400B | LCNDT PRO-400B STANDARD INTENSITY, BROAD-BEAM LED UV + WHITE LIGHT LAMP, INCLUDES BATTERY, 110-220V | 1 | |
| UVU2003025A | ADPTR KIT GAS STANDARD REVISED | 1 | |
| V01214B | DOUBLE OPEN-END WRENCH WITH STANDARD HANDLE | 3 | |
| V01616B | DOUBLE OPEN-END WRENCH WITH STANDARD HANDLE | 1 | |
| V02022B | DOUBLE OPEN-END WRENCH WITH STANDARD HANDLE | 1 | |
| V02426B | DOUBLE OPEN-END WRENCH WITH STANDARD HANDLE | 2 | |
| V02830B | DOUBLE OPEN-END WRENCH WITH STANDARD HANDLE | 3 | |
| V1 | V1 STANDARD REFERENCE STANDARD IIW 1 (TYPE V1), MADE FROM ALUMINUM | 3 | |
| V1 OLYMPUS | REFERENCE STANDARD | 1 | |
| V1-IIW-CS | V-1 (A-2) IIW Angle Beam Calibration Block (Metric). Made to British Standard: BS-2704, German Standard: DIN 54-120, Australian Standard AS 2803 and ISO 2400. Material: A36/1018 Carbon Steel. Thickness of 1" / 25 mm, Height of 4" / 100 mm for straight bea | 1 | |
| V1041J016A00 | LAVATORY SERVICE FILL COUPLING, SIZE -16, STANDARD COLLAR V1041J016A00 GS-L600JA | 1 | |
| V15A2.CS | STANDARD BLOCK ;SPECIFICATION: V1 ;CRACK SIZE: 1 MM | 1 | |
| V2 | V2 STANDARD REFERENCE STANDARD TYPE V2), MADE FROM ALUMINUM | 2 | |
| V2 ALUMINUM STANDARD | V2 STANDARD REFERENCE STANDARD TYPE V2), MADE FROM ALUMINUM | 1 | |
| V2-AL | R. STANDARD | 1 | |
| VANMAR NO 1 CAGE | VANMAR NO 1 STANDARD CAGE TOOL | 1 | |
| VANMAR NO 2 CAGE | VANMAR NO 2 STANDARD CAGE TOOL | 1 | |
| VIBREX 2000 | Balancer/Analyzer w/ Standard Accessories | 4 | |
| VIBREX 2000 + | Balancer/Analyzer w/ Standard Accessories | 4 | |
| VIBREX 2000 WITH AW139 | CHADWICK BALANCER/ANALYZER W/ STANDARD ACCESSORIES - REFURBISHED* | 1 | |
| VIBREX2000 | Balancer/Analyzer w/ Standard Accessories | 4 | |
| VM30889-C1A | EDDY CURRENT GENERAL CALIBRATION STANDARD | 2 | |
| VM650CIT-3A | CALIBRATION REFERENCE STANDARD – ROTARY PRPBE KIT | 1 | |
| VM89A | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 7075-T6 ALUMINUM, 12 HOLES 3/16” TO ¾” DIAMETERS, EACH HOLE CONTAINS A .030” X .030” CORNER EDM NOTCH, THREE SURFACE NOTCHES - .010”, .020” & .040” DEEP X ¾” LONG | 1 | |
| VM89S | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 4130 STEEL, 12 HOLES 3/16” TO ¾” DIAMETERS, EACH HOLE CONTAINS A .030” X .030” CORNER EDM NOTCH, THREE SURFACE NOTCHES - .010”, .020” & .040” DEEP X ¾” LONG | 1 | |
| VM89SS | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 304 STAINLESS STEEL, 12 HOLES 3/16” TO ¾” DIAMETERS, EACH HOLE CONTAINS A .030” X .030” CORNER EDM NOTCH, THREE SURFACE NOTCHES - .010”, .020” & .040” DEEP X ¾” LONG | 1 | |
| VM89SS-2 | REFERENCE STANDARD | 1 | |
| VMA3RS-1.0 | REFERENCE STANDARD | 1 | |
| VO1012B | WRENCH, OPEN END, STANDARD LENGTH, 5/16"-3/8" | 4 | |
| VO1214B | WRENCH, OPEN END, STANDARD LENGTH, 3/8"-7/16" | 3 | |
| VO1416B | WRENCH, OPEN END, STANDARD LENGTH, 7/16"-1/2" | 3 | |
| VO1618B | WRENCH, OPEN END, STANDARD LENGTH, 1/2"-9/16" | 2 | |
| VO1820B | WRENCH, OPEN END, STANDARD LENGTH, 9/16"-5/8" | 1 | |
| VO2022B | WRENCH, OPEN END, STANDARD LENGTH, 5/8"-11/16" | 1 | |
| VO2224B | WRENCH, OPEN END, STANDARD LENGTH, 11/16"-3/4" | 1 | |
| VO2426B | WRENCH, OPEN END, STANDARD LENGTH, 3/4"-13/16" | 2 | |
| VO2428B | WRENCH OPEN END STANDARD 3/4"X7/8" | 1 | |
| VO2628B | WRENCH, OPEN END, STANDARD LENGTH, 13/16"-7/8" | 1 | |
| VO2830B | WRENCH, OPEN END, STANDARD LENGTH, 7/8"-15/16" | 3 | |
| VO3032B | WRENCH, OPEN END, STANDARD LENGTH, 15/16"-1" | 2 | |
| VO3234B | DOUBEL OPEN END WRENCH, STANDARD INCH, SIZE 1” X 11/16 | 2 | |
| VO3638B | OPEN WRENCH,STANDARD LENGTH,1-1/8" | 2 | |
| VO810B | WRENCH, OPEN END, STANDARD LENGTH, 1/4"-5/16" | 3 | |
| VOM1011B | WRENCH OPEN END STANDARD METRIC 10X11MM | 1 | |
| VOM1213B | WRENCH OPEN END STANDARD METRIC 12X13MM | 1 | |
| VOM1415B | WRENCH OPEN END STANDARD METRIC 14X15MM | 1 | |
| VOM1618B | WRENCH OPEN END STANDARD METRIC 16X18MM | 1 | |
| VOM1719B | WRENCH OPEN END STANDARD METRIC 17X19MM | 1 | |
| VOM1922B | WRENCH METRIC, OPEN END, STANDARD LENGTH, 19-22MM | 1 | |
| VOM2224B | WRENCH OPEN END STANDARD METRIC 22X24MM | 1 | |
| VOM2730B | WRENCH OPEN END STANDARD METRIC 27X30MM | 1 | |
| VOM3032B | WRENCH OPEN END STANDARD METRIC 30X32MMMM | 2 | |
| VOM67B | WRENCH OPEN END STANDARD METRIC 6X7MM | 1 | |
| VOM89B | WRENCH OPEN END STANDARD METRIC 8X9MM | 1 | |
| VP Packing AJ | PACKING FOR AXLE JACKS: STANDARD | 1 | |
| VTB08050 | BEARING (STANDARD) | 1 | |
| W-19-1 | Boeing W-19 Reference Standard.-1 Assembly | 1 | |
| W-87 REF STD IBD | BOEING REFERENCE STANDARD. W-87 INBOARD 360 REFERENCE STANDARD. Materials: 2024-T351 and 7075-T651 Aluminum. Includes Test Report Traceable to NIST. | 1 | |
| W-87 REF STD OBD | BOEING REFERENCE STANDARD. W-87 OUTBOARD 360 REFERENCE STANDARD. Materials: 2024-T351 and 7075-T651 Aluminum. Includes Test Report Traceable to NIST. | 1 | |
| W-HV400/08 | Bowers W-HV400/08 30N Probe (standard) | 1 | |
| W-TS-100 | Bowers W-TS-100 Standard Tracer for TR200 | 1 | |
| W-TT300 | Bowers W-TT300 Ultrasonic Thickness Gauge 0.01mm Reading (5MHz) Probe Standard | 1 | |
| W203 | STANDARD WEDGE | 1 | |
| W500-28-931 | NEZ STANDARD W931-CB | 1 | |
| WCI-1700NE-0801-20F | STANDARD NOSECAP ASSEMBLY | 2 | |
| WCI-1700NE-0823-20F | STANDARD NOSECAP ASSEMBLY | 2 | |
| WCI-1700NE-1001-20F | STANDARD NOSE CAP ASSEMBLY | 2 | |
| WCI-1700NE-A4243-20F | STANDARD NOSECAP ASSY | 1 | |
| WCI-A320-53-1378 Service Bulletin Kit | STANDARD TOOL | 1 | |
| WCI-A320-53-1379 Service Bulletin Kit | STANDARD TOOL | 1 | |
| WCI-CAM-A30-1-30-V2 | MANDREL - STANDARD CA TOOLING | 1 | |
| WCI-CAM-A50-1-40-V2 | MANDREL - STANDARD CA TOOLING | 1 | |
| WCI-EKA330533226-3 | STANDARD TOOL TOOLD07 | 1 | |
| WCI-TK-06-2-N-2150 | COLD WORKING TOOL STANDARD | 2 | |
| WCI-TK-10-1-N-.3245 | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-10-1-N-3245 | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-10-2-N | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-12-1-N | COLD WORKING TOOL STANDARD | 2 | |
| WCI-TK-12-1-N-.3870 | COLD WORKING TOOL STANDARD | 2 | |
| WCI-TK-12-1-N.3870 | COLD WORKING TOOL STANDARD | 2 | |
| WCI-TK-12-2-N | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-12-2-N-.4025 | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-16-1-N | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-16-1-N-.5120 | COLD WORKING TOOL STANDARD | 1 | |
| WCIA 3205313791 | STANDARD TOOL | 2 | |
| WCIA3205313781 | STANDARD TOOL | 2 | |
| WCIA3205313791 | STANDARD TOOL | 2 | |
| WCIA320531381-1 | STANDARD TOOL | 2 | |
| WK-3 | STANDARD PNEUMATIC WHEEL KIT | 1 | |
| WK-314M | WHEEL STANDARDS NORTEC | 1 | |
| WK-314M, | WHEEL STANDARDS NORTEC | 1 | |
| WK-314M, WK-314N | Wheel Standards Nortec | 1 | |
| WK-314N | WHEELS STANDARDS NORTEC | 1 | |
| WK-737M/100-200, | WHEEL STANDARDS NORTEC | 1 | |
| WK-737M/100-200, WK-737N/100-200 | Wheel Standards Nortec | 1 | |
| WK-737N/100-200 | WHEEL STANDARDS NORTEC | 1 | |
| WK-C130M, | WHEEL STANDARDS NORTEC | 1 | |
| WK-C130M, WK-C130N | Wheel Standards Nortec | 1 | |
| WK-C130N | WHEEL STANDARDS NORTEC | 1 | |
| WMH2904110 | STANDARD JAW INSERTS | 1 | |
| WNG-3-NDI-001-10 | BOEING STANDARD | 1 | |
| WNG-3-NDI-001-5 | BOEING STANDARD | 1 | |
| WNG-3-NDI-001-6 | BOEING STANDARD | 1 | |
| WNG-3-NDI-002-7 | BOEING STANDARD | 1 | |
| WNG-3-NDI-002-8 | BOEING STANDARD | 1 | |
| WNG-3-NDI-011-10 | BOEING STANDARD | 1 | |
| WNG-3-NDI-011-5 | BOEING STANDARD | 1 | |
| WNG-3-NDI-011-6 | BOEING STANDARD | 1 | |
| WNG-3-NDI-011-7 | BOEING STANDARD | 1 | |
| WNG-3-NDI-011-8 | Boeing Standard | 1 | |
| WNG-3-NDI-011-9 | Boeing Standard | 1 | |
| WNG-3-NDI-012-10 | BOEING STANDARD | 1 | |
| WNG-3-NDI-012-5 | BOEING STANDARD | 1 | |
| WNG-3-NDI-012-6 | BOEING STANDARD | 1 | |
| WNG-3-NDI-012-7 | BOEING STANDARD | 1 | |
| WNG-3-NDI-012-8 | Boeing Standard | 1 | |
| WNG-3-NDI-012-9 | Boeing Standard | 1 | |
| WNG-3-NDT-001-5 | BOEING STANDARD | 1 | |
| WNG-3-NDT-001-7 | BOEING STANDARD | 1 | |
| WNG-3-NDT-001-8 | Boeing Standard | 1 | |
| WNG-3-NDT-001-9 | Boeing Standard | 1 | |
| WNG-3NDI-XRS599-02 | Reference Standard, Rear Spar Layer | 1 | |
| WNG-3NDI-XRS599-03 | Reference standard, Lower Skin Layer | 1 | |
| WNG-CB-Repair-0.622 | NDI CB Repair Reference Standard .622 diameter hole, 2" Wide x 11" Long, T=.272" Thick, T2=.500" Thick | 1 | |
| WNG-CB-Repair-0.685 | NDI CB Repair Reference Standard .685 diameter hole, 2" Wide x 11" Long, T=.320" Thick, T2=.500" Thick | 1 | |
| WNG-CB-Repair-0.747 | NDI CB Repair Reference Standard .747 diameter hole, 2" Wide x 11" Long, T=.389" Thick, T2=.500" Thick | 1 | |
| WNG-CB-Repair-0.810 | NDI CB Repair Reference Standard .810 diameter hole, 2" Wide x 11" Long, T=.500" Thick, T2=.500" Thick | 1 | |
| WNG-CB-Repair-0.870 | NDI CB Repair Reference Standard .870 diameter hole, 2" Wide x 11" Long, T=.272" Thick, T2=.500" Thick | 1 | |
| WNG-CB-Repair-0.932 | NDI CB Repair Reference Standard .932 diameter hole, 2" Wide x 11" Long, T=.563" Thick, T2=.500" Thick | 1 | |
| WNG-CB-Repair-0.997 | NDI CB Repair Reference Standard .997 diameter hole, 2" Wide x 11" Long, T=.583" Thick, T2=.500" Thick | 1 | |
| WNG-CB-Repair-1.057 | NDI CB Repair Reference Standard 1.057 diameter hole, 2" Wide x 11" Long, T=.583" Thick, T2=.500" Thick | 1 | |
| WNG-Steel-Doubler-0.625 | NDI Steel Doubler Reference Standard .625" diameter hole, 2" Wide x 11" Long, T=.500" Thick, T2=.500" Thick, 17-4PH | 1 | |
| WNG-Steel-Doubler-1.125 | NDI Steel Doubler Reference Standard 1.125" diameter hole, 2" Wide x 11" Long, T=.500" Thick, T2=.500" Thick, 17-4PH | 1 | |
| WP632- CALIBRATI ON | TRACEABLE CALIBRATION OF WOODPECKER WP-632AM-R HANDPIECE TO NATIONAL STANDARDS | 1 | |
| WP632- CALIBRATION | TRACEABLE CALIBRATION OF WOODPECKER WP-632AM-R HANDPIECE TO NATIONAL STANDARDS | 1 | |
| WRENCH SET, L-SHAPE, BALL HEX, STANDARD (13 PCS.) (.050" TO 3/8') | WRENCH SET, L-SHAPE, BALL HEX, STANDARD (13 PCS.) (.050" TO 3/8') | 1 | |
| WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 1/2"-9/16", 12-POINT | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 1", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 1", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 1/2", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 1/2", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 1/4", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 1/4", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 11/16", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 11/16", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 11/32", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 11/32", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 13/16", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 13/16", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 3/4", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 3/4", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 3/8", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 3/8", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 5/8", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 5/8", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 7/16", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 7/16", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 7/8", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 7/8", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 9/16", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 9/16", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 1/4", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 1/4", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 11/32", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 11/32", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 5/16", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 5/16", 12-POINT | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1 /4"-5/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1 /4"-5/16", 12-POINT | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1/2"-9/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| X0605 | FRANK DRIVE OFFSET BOX (STANDARD HANDLE) | 1 | |
| XB1214A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| XB1416A | WRENCH, BOX, STANDARD LENGTH, STANDARD LENGTH, 10° OFFSET, 7/16"-1/2", 12-POINT | 1 | |
| XB1618A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| XB1820A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 9/16"-5/8", 12-POINT | 1 | |
| XB2022A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 5/8"-11/16", 12-POINT | 1 | |
| XB2224A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 11/16"-3/4", 12-POINT | 1 | |
| XB2426A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 3/4"-13/16", 12-POINT | 1 | |
| XB2830A | STANDARD DOUBLE END SPRING SPANNER | 1 | |
| XB3032A | WRENCH BOX OFFSET STANDARD 15/16"X1" | 1 | |
| XBD400-50013-013 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| XBM1011A | WRENCH BOX OFFSET STANDARD METRIC 10X11MM | 1 | |
| XBM1012A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 10-12 MM, 12 POINT | 1 | |
| XBM1214A | WRENCH BOX OFFSET STANDARD METRIC12X14MM | 1 | |
| XBM1315A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 13-15 MM, 12 POINT | 1 | |
| XBM1415A | WRENCH BOX OFFSET STANDARD METRIC 13X15MM | 1 | |
| XBM1417A | WRENCH BOX OFFSET STANDARD METRIC 14X17MM | 1 | |
| XBM1618A | WRENCH BOX OFFSET STANDARD METRIC 16X18MM | 1 | |
| XBM1719A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 17-19 MM, 12 POINT | 1 | |
| XBM1821A | WRENCH BOX OFFSET STANDARD METRIX 18X21MM | 1 | |
| XBM2224A | WRENCH BOX OFFSET STANDARD METIC 22X24MM | 1 | |
| XDES79A | 7/32–9/32" HEX, SAE SPLINE STANDARD HANDLE 15° OFFSET BOX WRENCH | 2 | |
| XDES810A | 1/4–5/16" HEX, SAE SPLINE STANDARD HANDLE 15° OFFSET BOX WRENCH | 3 | |
| XO1012 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 5/16"-3/8", 12-POINT | 1 | |
| XO1214 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| XO1618 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| XO1820 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 9/16"-5/8", 12-POINT | 1 | |
| XO2024 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 5/8"-3/4", 12-POINT | 1 | |
| XO2428 | WRENCH BOX OFFSET STANDARD 3/4"X7/8" | 1 | |
| XO810 | DOUBLE RING WRENCH, STANDARD LENGTH DEEP 60O OFFSET, 12 POINT, SIZE 1/4"X5/16” | 1 | |
| XP-2000 | STANDARD TOOL, DIGIT | 1 | |
| XP2000 | STANDARD TOOL, DIGIT | 1 | |
| XPT-HOSTED-BASE | XPT-HOSTED-BASE;Annual hosting fee for one standard instance of XPERTrak hosted products | 1 | |
| XS1214A | STANDARD OFFSET END SPRING SPANNER | 3 | |
| XS810A | WRENCH BOX OFFSET STANDARD 5/16"X1/4" | 3 | |
| Z-2639 | WELDMENT, MAIN ADAPTOR - LEARJET - COMES STANDARD ON 02-7818C0110 | 4 | |
| ZC12-DEL-3C1N | Composite Standard, Boeing All PT1 51-01-01 | 1 | |
| ZHP-200 | HI-LOK COLLAR REMOVAL PLIERS (STANDARD) | 1 | |
| ZLGG | Lever Grease Gun Standard (Boxed) | 1 | |
| ZNDT-2003-1S | STEEL MUTLI HOLE REFERENCE STANDARD>>> THE NOTCH SPECIFICATION IS 0.030'' X 0.030'' (45° ) CORNER NOTCH | 1 | |
| ZP-FMA-0000 | ZP-FMA-0000;Standard Housing for Fiber Adapters | 1 | |
| ZT108-3 | STANDARD RIVET SHAVER ZT706 7/16 (PFER0036/21) | 1 | |
| f 72958-8 | Spanner Wrench An Standard Type | 1 | |
| f 72959-1 | Spanner Wrench An Standard Type | 8 | |
| f 72959-10 | Spanner Wrench An Standard Type | 4 | |
| f 72959-11 | Spanner Wrench An Standard Type | 4 | |
| f 72959-12 | spanner wrench an standard type | 4 | |
| f 72959-2 | Spanner Wrench An Standard Type | 3 | |
| f 72959-3 | Spanner Wrench An Standard Type | 3 | |
| f 72959-4 | Spanner Wrench An Standard Type | 7 | |
| f 72959-5 | Spanner Wrench An Standard Type | 4 | |
| f 72959-6 | Spanner Wrench An Standard Type | 3 | |
| f 72959-7 | Spanner Wrench An Standard Type | 5 | |
| f 72959-9 | Spanner Wrench An Standard Type | 4 | |
| f72958-8 | Spanner Wrench An Standard Type | 1 | |
| f72959-1 | Spanner Wrench An Standard Type | 8 | |
| f72959-10 | Spanner Wrench An Standard Type | 4 | |
| f72959-11 | Spanner Wrench An Standard Type | 4 | |
| f72959-12 | spanner wrench an standard type | 4 | |
| f72959-2 | Spanner Wrench An Standard Type | 3 | |
| f72959-3 | Spanner Wrench An Standard Type | 3 | |
| f72959-4 | Spanner Wrench An Standard Type | 7 | |
| f72959-5 | Spanner Wrench An Standard Type | 4 | |
| f72959-6 | Spanner Wrench An Standard Type | 3 | |
| f72959-7 | Spanner Wrench An Standard Type | 5 | |
| f72959-9 | Spanner Wrench An Standard Type | 4 | |
| 11030145 | 0.1771 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 2546B-01 | PUMP-VACUUM, PORTABLE, STANDARD DUTY (GDC10149) | 4 | |
| D12-10 | CALIBRATING OIL,STANDARD | 1 | |
| D12-30 | CALIBRATING OIL,STANDARD | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
