| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2C7496P19 | STG 3 | 1 | |
| 2C7497P19 | STG 3 | 1 | |
| 2C7497P20 | STG 3 | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 02-7898C0100 | Jack, 3-Stg 5 Ton (Ce) | 1 | |
| 02-7924C0100 | ASSY, 3-STG AXLE JACK (CE) | 2 | |
| 02-7925C0100 | JACK, 25 TON 3-STG AXLE (CE) | 4 | |
| 02A7898C0100 | Jack, 3-Stg 5 Ton (Ce) | 4 | |
| 02A7917C0100 | JACK, TRIPOD 15 TON 3-STG (CE) | 5 | |
| 1033J915ZDL | 3IN SWIDE DR STGRY/PURP | 1 | |
| 10C1108G01 | CF34-10 FIXTURE PRELOAD SPACER STG 1 FAN BLADE 195 | 1 | |
| 11C3087 | FIXTURE - REMOVAL HP COMPR RTR - STG 5 DISK/STG 3-4 SPOOL | 1 | |
| 11C3388 | FIXTURE - REMOVAL-STG 2 BLISK/SPOOL 3-4 HP COMPR RTR | 1 | |
| 17A1573G01 | GAGE, OVERSIZED SETSCREW STG 3-4 | 1 | |
| 17A1577G01 | HAMMER, SLIDE OVALIZE & CONE STG 3-14 | 1 | |
| 1C6279 | FIXTURE SET, INSP LPT STATOR SEAL STG 4 TF39 ENG | 1 | |
| 1C6280 | FIXTURE , INSP. LPT STATOR SEAL, STG. 3 | 1 | |
| 1C6280 REV C | FIXTURE , INSP. LPT STATOR SEAL, STG. 3 | 1 | |
| 2C14692G01 | FIXTURE SITTING, LOW PRESS TURBINE NOZ STG 2&3 | 1 | |
| 2C18089G01 | FIXTURE,RUNOUT-LP TURB,STG 3,4,5 DISK | 1 | |
| 2C5610 | RETAINER - STG #3 NOZZLE | 1 | |
| 2C5610P01 | RETAINER 0 NOZZLE STG 3 | 1 | |
| 2C5799G01 | PROTECTOR - COMP. STG 3-14 | 1 | |
| 2C6238G04 | SLING, LIFT AND TURNOVER – LPTR DISKS STG. 1, 2, 3, AND 4 | 2 | |
| 2C6259 | FIXTURE, SET SECURE-VARIABLE STATR ARMS, STG 3 - 6 | 1 | |
| 2C6259 REV P | FIXTURE, SET SECURE-VARIABLE STATOR ARMS, STG. 3 - 6 | 1 | |
| 2C6541 | (RT) GAGE,INSP-HPCR-STG 11-13 | 1 | |
| 2C6649G02 | NUT STARTING - COMPRESSOR ROTOR STG 3-9 | 1 | |
| 2C6872 | FIXTURE HLDG STG 3 LOW PRESS TURB BLADE FMF 2C6861 | 1 | |
| 2C6872 REV A | FIXTURE, HOLDING STG. 3 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6879P01 | Stg. 1 Fan Blade LE Template (80A3/80C2) | 4 | |
| 2C6963G04 | Gage Set, IGV, Stg.1-4 (80A3 / C2) | 2 | |
| 2C6965 | WRENCH - TORQUE LIMITING -STG. 3-5 VSV NUTS | 1 | |
| 2C7376G01/G03TK | Stg.1 & 2 HPT Blade Water Flow Check Fixture (CF6-80A3 / C2) | 1 | |
| 2C7842G09 | VANE LENGTH GAGE STG 3 | 1 | |
| 2C8016 | GAGE, SIGHT - VARIABLE STATOR VANE STG 3, 4 & 5 | 2 | |
| 2C8042 | WEDGING TOOL SET; STG 3-14 | 1 | |
| 2C81152 | RING ASM, STG 4-10 SPOOL CF34 | 1 | |
| 2C81195G01 | PULLER,STG 1& 2 BLISK CF34 | 1 | |
| 2C81196G01 | ADAPT HOIST STG1 &2 BLISK CF34 | 1 | |
| 2C91185 | ADAPTER-BAL-STATIC-STG 3 - 4 - 5 | 1 | |
| 2C91232 | PULLER-LPT STG 3&4 | 1 | |
| 36453 | PINON SHAFT: STG1, USE 36453=8D USE 36453 | 2 | |
| 538522 | LOCK-COMPR BLADE (STG 13) | 1 | |
| 737317 | LOCK-COMPR BLADE (STG 13) | 1 | |
| 65726300 | 65726300-WATERPUMP PLIER FASTGRIP300MM | 1 | |
| 856A1010G01 | RATCHET-HPCR NUT STG 3&4 | 7 | |
| 856A1023 | NUT STARTER STG 3/4 BOLTS | 1 | |
| 856A1023G01 | Driver, Nut Start - Compressor Rotor Stg 3 to 4 Flange Bolts (nut start driver) | 6 | |
| 856A1027 | FIXTURE, LIFT - COMPR ROTOR, STG 3 DISK & BLADES | 1 | |
| 856A1027 G01 | FIXTURE LIFT ‐ C/R STG 3 DISK AND BLADES | 10 | |
| 856A1027G01 | Fixture, Lift - C/R Stg 3 Disk and Blades (lift fixture) | 10 | |
| 856A1245G02 | FIXT. CLAMP HPCR STG 3 | 1 | |
| 856A1282 | TOOLSET,INSTL/REMV STG.1,2,3 COMP. ROTOR BLADES&RE | 1 | |
| 856A1282 REV C | TOOL SET, INSTL/REMOVE STG. 1,2,3 COMP. RTR BLADES & RETAIN | 1 | |
| 856A1282G01 | TOOL SET I/R STG 1,2,3 HPCR BLD&RET | 1 | |
| 856A1331 | GAGE,SET-IGV, STG. 1,2,3 CAR. STATOR VANE CLEVIS | 1 | |
| 856A1331 REV D | GAGE,SET-IGV, STG. 1,2,3 CAR. STATOR VANE CLEVIS | 1 | |
| 856A1331G04 | GAGE SET IGV STG 1/2/3 VSV CLV ASSY | 1 | |
| 856A1503G01 | FIXT,REMOVAL - HP COMPR INNER VANCE SHROUD PIN, STG 1-3 | 1 | |
| 856A2326G01 | PIN GUIDE BOOSTER STG 1-2-3-4 | 1 | |
| 856A2408G01 | TOOL SET, PUSH/PULL STG 3 LPT | 1 | |
| 856A2408G02 | TOOL SET, PUSH/PULL STG 3 LPT | 1 | |
| 856A2721G01 | PULLER - ROTATING AIR SEAL & DISK STG 3 | 4 | |
| 856A2760G02 | HANDLING SUPPORT RING - CONE STUB SHAFT & DISK STG 3 | 8 | |
| 856A2762 | ADPT BAL LPT DISK STG 1/3&2 | 1 | |
| 856A2762G01 | ADPT BAL LPT DISK STG 1/3&2 | 1 | |
| 856A2976G01 | FIXIURE ASSY/DISASSY-LPT NOZZLE SEGMENTS STG3 | 1 | |
| 856A2976G02 | ASSY/DISASSY FIXTURE - LPT VANES STG3 | 5 | |
| 856A3416 | PULL ROT AIR SEAL STG 3 | 1 | |
| 856A3735G03 | Tool Set, Guide Pin Booster Vane Assembly STG 2-3-4 | 8 | |
| 856A3749 | TOOL SET, INSTALL STG. 2/3 | 1 | |
| 856A3749G01 | TOOL SET INSTALL STG 2&3 STRIP | 5 | |
| 856A3752 | FIXT,REM STG 1,2,3OUT AIR SEAL | 1 | |
| 856A3752G02 | FIXT, REMOVE STG 1-2-3 OUTER STAT AIR SEAL | 1 | |
| 856A3752G03 | FIXT, REMOVE STG 1-2-3 OUTER STAT AIR SEAL | 1 | |
| 856A3752G04 | FIXT,REM STG 1,2,3 OUT AIR SEAL | 8 | |
| 856A3757 | FIXT. INSTALL LPT STG. 3 | 1 | |
| 856A3757G02 | SHIELD INSTALLING FIXTURE – LPT STG 3 | 5 | |
| 856A3757G03 | SHIELD INSTALLING FIXTURE – LPT STG 3 | 4 | |
| 856A3763 | FIXTURE, ASSEMBLY/DISASSEMBLY - LPT NOZZLE SEGMENTS, STG 3 (FIXTURE) | 1 | |
| 856A3763G01 | FIXTURE, ASSEMBLY/DISASSEMBLY - LPT NOZZLE SEGMENTS,STG 3 (FIXTURE)OBSELETE REPLACED BY 856A3763G02 THEN 856A3763G03 | 1 | |
| 856A3763G03 | Fixture, Assembly/Disassembly - LPT Nozzle Segments, Stg 3 (fixture) | 6 | |
| 856A3764 | TOOL SET, INSTALLATION - LPT OUTER STATIONARY AIR SEAL, STG3 | 1 | |
| 856A3764G01 | TOOL SET, INSTALLATION - LPT OUTER STATIONARY AIR SEAL, STG3 | 8 | |
| 856A3788 | TOOL SET, INST. -LPT OUTER STATIONARY AIR SEAL, STG 2 AND 3 | 1 | |
| 856A3788G01 | TOOL SET, INST. - LPT OUTER STATIONARY AIR SEAL, STG.2 AND 3 | 1 | |
| 856A3788G02 | TOOL SET, INST. - LPT OUTER STATIONARY AIR SEAL, STG.2 AND 3 | 7 | |
| 856A4055G15 | GRINDER, BLADE TIP-HPC ROTOR STG 1-9 (TECH INSERTION) (5B/E, 7B/3 | 2 | |
| 856A4055P22 | SET MASTER STG3 | 1 | |
| 856A4602G01 | MASTER - LPT STG 3 BLADE | 2 | |
| 856A4606G01 | FIXT CHECK BLD LPT STG 3 MASTER | 2 | |
| 856A5503G06 | MASTER - LPT STG 3 BLADE | 2 | |
| 856A5507G04 | CHECKING FIXTURE - LPT BLADES STG 3 | 2 | |
| 856A5507G05 | CHECKING FIXTURE - LPT BLADES STG 3 | 1 | |
| 856A5516G04 | FIXT GRD BLD LPT STG 3 CONVEX SIDE | 1 | |
| 856A5517G06 | FIXT GRD BLD STG 3 LPT CONCAVE SID | 1 | |
| 856A5625G01 | FIXT RESHAPE LPT STG 3 | 1 | |
| 856A5656G01 | FIXT, CHECK TILT ANGLE STG 3 | 1 | |
| 856A5658G01 | HOLDING FIXTURE - LPT NOZZLE STG 3 | 1 | |
| 856A5679 G01 | Holding Fixture Stg 3 Outer | 1 | |
| 856A5679G01 | TOOL SET, HOLD FIXTURE LPT STG 3 | 1 | |
| 856A5702G01 | DIM INSP MASTER - LPT BLADE STG 3 | 1 | |
| 856A5702G03 | DIM INSP MASTER - LPT BLADE STG 3 | 1 | |
| 856A5707G01 | DIM INSP FIXTURE - LPT BLADE STG 3 | 1 | |
| 856A5707G02 | DIM INSP FIXTURE - LPT BLADE STG 3 | 1 | |
| 856A5750G01 | CHECKING FIXTURE - LPT NOZZLE STG 3 | 1 | |
| 856A5750G02 | CHECKING FIXTURE - LPT NOZZLE STG 3 | 1 | |
| 856A5902G01 | DIM INSP MASTER - LPT BLADE STG 3 | 1 | |
| 856A5906G01 | DIM INSP CHECKING FIXTURE - LPT BLADE STG 3 | 1 | |
| 856A6703G01 | DIM INSP MASTER - LPT BLADE STG 3 | 1 | |
| 856A6707G01 | CHECKING FIXTURE - LPT BLADE STG 3 | 1 | |
| 956A1189 | PIN - ALIGNMENT - STG 2 & 3 | 1 | |
| 956A8446 | FIXTURE - INSTALL - PLATE INSULATION - STG 3 | 1 | |
| 956A8448 | FIXTURE - RESTRAIN - NOZZLE - LPT STG 3 SEGMENT | 1 | |
| 956A8460 | CHECK - RING RETAINER - LPT STG 2 & 3 | 1 | |
| 956A8472 | FIXTURE - LIFT AND TURN - LPT DISK STG 3 ASSY | 1 | |
| 98D27504115041 | DISTGAUGETRK3RH | 1 | |
| 99A53107283000 | AIRBUS A330 REFERENCE STANDARD 7075-T7451 ALUMINUM. PART 4 53-40-18-270-801-A-01 - Bulk Cargo Compartment Door Cut-out Lateral Frame at Bulk Door-Fittings, FR67 at STGR37 and FR69 at STGR38, RH, FIGURE 53-40-18-991-015-A. Includes Test Report and Cer... | 2 | |
| 9C1213 | FIXTURE, SUPPORT- STG 2 & 3 LP | 1 | |
| 9C2299 | PULLER KIT BUSHINGS OUTER STG 1-2-3 | 1 | |
| 9C2374 | DRIVE HANDLE RING ACTG IGV AND STG 1-2-3 | 1 | |
| 9C2431 | KIT CONTROL POSITION TOGGLE SEAL STG 3-6 | 1 | |
| 9C2431G01 | KIT, CTRL POSITION - TOGGLE SEAL STG3/6 | 1 | |
| A102948-01 (2C14907G01) | SHAFT (stg 3-9 with blades) | 1 | |
| AAU18002VT3 | SET VIRT TRAINER STG 3 | 1 | |
| AAU18002VT3N | SET VIRT TRAINER STG 3 NTWK | 1 | |
| BRA7380VEM | AIR CMPSR 2STG 3PH 7HP 80GL V | 1 | |
| BRA8380V | AIR CMPSR 2STG 3PH 8HP 80GL V | 1 | |
| C78004-1 | LOCKPIN-TR TRANSTG SLEEVE,CFM56-3 | 29 | |
| HU26647-2 | Spacer Clip STG2/3/4/5 ( 32 off per Operation) | 1 | |
| HU39752 | PAD STG 3 DISK | 1 | |
| IAE1M14074 | CARRIER FIXTURE HEATING LPT TURBINE STG 3,4,5,6,7 | 1 | |
| IAE1M14111 | STG3 RING STOP | 1 | |
| IAE1M14112 | STG3 RING STOP | 1 | |
| IAE1R18673 | SHAFT STUB DUMMY ASSY SHAFT STG3-8 DISCS COM. | 1 | |
| IAE2J12620 | FIXTURE - LPC STG 2.3 STATOR | 1 | |
| KCP1423ZDL4 | STGRY/PRPL/PS 73IN RC | 1 | |
| L38602G01 | FIG 55 -35, NOZZLE, LPT STATOR- STG 2 MACHINING | 1 | |
| L38602G02 | FIG 55 - 36, NOZZLE, LPT STATOR- STG 2 MACHINING | 1 | |
| L38602G03 | FIG 55 - 37, NOZZLE, LPT STATOR- STG 2 MACHINING | 1 | |
| L38603G01 | FIG 55 - 58, NOZZLE, LPT STATOR-STG 3 MACHINING OMITTED AT 3 AND 9 O'CLOCK POSITIONS | 1 | |
| L38603G02 | FIG 55 - 59, NOZZLE, LPT STATOR-STG 3 MACHINING AT SPLITLINE - 3 AND 9 O'CLOCK POSITIONS | 1 | |
| L38603G03 | FIG 55 - 60, NOZZLE, LPT STATOR-STG 3 MACHINING AT SPLITLINE - 3 AND 9 O'CLOCK POSITIONS | 1 | |
| PWA15982 | TF33/JT3 TURBINE VANES STG 2 - CLASSIFICATION GAGE | 1 | |
| PWA15983 | TF33/JT3 TURBINE VANES STG 2 - CLASSIFICATION GAGE MASTER | 1 | |
| PWA25649 | SCREW - LPT 3, 4, 5, 6TH STG STATIC BAL_[PWA25649] | 1 | |
| PWA25669 | WEIGHT - CALIBRATION LPC 3RD STG_[PWA25669] | 1 | |
| PWA25872 | MASTER,SETTING - LPT 3RD STG NOTCH_[PWA25872] | 1 | |
| PWA26232 | EXTENSION - HPC 15TH STG TIEROD NUT_[PWA26232] | 1 | |
| PWA26351 | WRENCH - 8TH STG DUCT RET NUT_[PWA26351] | 2 | |
| PWA26532 | MASTER - HPT 2ND STG STATIC BAL_[PWA26532] | 1 | |
| PWA27360B | CLAMP - BLADE,LPT 6TH STG TWIST CHK_[PWA27360B] | 1 | |
| PWA27364 | MASTER,SETTING - BLADE,LPT 6TH STG NOTCH_[PWA27364] | 1 | |
| PWA27743 | PULLER - 2ND STG TURB ROTOR_[PWA27743] | 2 | |
| PWA27764-3 | WEIGHT, CALIB - HPT 2ND STG STATIC BAL_[PWA27764-3] | 1 | |
| PWA27792 | SLING, HANDLING - 1,2,3 STG LPC STATOR_[PWA27792] | 1 | |
| PWA27814 | PULLER, KNOCKER - LPC AIRSEAL, 3RD STG_[PWA27814] | 2 | |
| PWA27831 | HOLDER, MOMENT WT - 1STG FAN BLADE_[PWA27831] | 1 | |
| PWA27841 | EYE, LIFT - 3RD STG TURBINE DISK_[PWA27841] | 2 | |
| PWA27893 | ADAPTER,PLATE - LPC 3RD STG BLD TABLOCK_[PWA27893] | 2 | |
| PWA27894 | ANVIL,BACKUP - LPC 3RD STG BLADE TABLOCK_[PWA27894] | 2 | |
| PWA27919 | ANVIL,BACKUP - LPC 3RD STG BLD TABLOCK_[PWA27919] | 2 | |
| PWA28230 | GAGE,NO GO - HPC 13TH STG CHORD WIDTH_[PWA28230] | 1 | |
| PWA28243 | GAGE - DISKS,HPC 7TH~15TH STG Z-PL DIA._[PWA28243] | 1 | |
| PWA28253 | GAGE, AXIAL DEFLECTION - LPT 5TH STG VAN_[PWA28253] | 1 | |
| PWA29837 | TEMPLAT,MARKING - 1ST STG FAN BLADE_[PWA29837] | 1 | |
| PWA29931 | RETAINER-LPT 3 STG AIRSEAL TO_[PWA29931] | 2 | |
| PWA29933 | RETAINER-LPT 5 STG AIRSEAL TO_[PWA29933] | 2 | |
| PWA29945 | PULLER-LPT #3 STG AIRSEAL_[PWA29945] | 2 | |
| PWA29949 | PUSHER-LPT 4 STG FRO 3 STG DIS_[PWA29949] | 2 | |
| PWA35050 | TF33/JT3 TURBINE VANES STG 1 - CLASSIFICATION GAGE | 1 | |
| PWA35051 | TF33/JT3 TURBINE VANES STG 1- CLASSIFICATION GAGE MASTER | 1 | |
| PWA35849 | FIXTURE, AIRFLOW - 1STG TURB BLD & BFFL_[PWA35849] | 1 | |
| PWA75403 | PULLER-HPT, 2 STG TURBVOEDUCT_[PWA75403] | 2 | |
| PWC61074 | SUPPORT ASSY 3 STG | 1 | |
| RRT051082 | CLAMP RING - HOLD ANTI-SCORE PLATES IN POSITION ON STG 1-3 HP DISC | 1 | |
| SGD 3401-50-330 | HIGH PURITY SS 1 STG REGULATOR 0-50 PSIG CGA 330 | 1 | |
| SM24-59PWZ | KETP602A3 STGRY/BLK/BLTLED | 1 | |
| STG4310D | Pyramex STG4310D Solara Safety Glasses - Clear Lens | 1 | |
| STG4320D | Pyramex STG4320D Solara Safety Glasses - Gray Lens | 1 | |
| T72340220 | FIXTURE, LIFT STG3-9 SPOOL HPC RTR ASSY HORIZ POS | 1 | |
| lC6280 | FIXTURE , INSP. LPT STATOR SEAL, STG. 3 | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
