| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 137404 | STATOR | 1 | |
| 244-669 | STATOR | 1 | |
| 430201 | STATOR | 1 | |
| J34002-26 | STATOR | 1 | |
| J34002-4-F | STATOR | 1 | |
| J34002-6 | STATOR | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 856A1432G03 | PROTRACTOR, ELECTRONIC PORTABLE - VARIABLE STATOR VANE (VSV ELECTRONIC PROTRACTOR) | 2 | |
| (CALIB) 856A1084G02 | CART-STATOR ACTUATOR (CALIBRATION) | 2 | |
| (CALIB) 856A1084G04 | CART-STATOR ACTUATOR (CALIBRATION) | 2 | |
| (CALIB) 9429M24G03 | PROTRACTOR, ELECTRONIC PORTABLE - VARIABLE STATOR VANE (CALIBRATION) | 1 | |
| 002-10412-00 | Stator Lifting Eye | 1 | |
| 00711093N | STATOR ASSEMBLY ADAPTER | 1 | |
| 01-520-5481 | STRAP LOCKING FAN STATOR | 1 | |
| 0S22484 | STATOR GUIDE | 1 | |
| 0S22488 | STATOR GUIDE | 1 | |
| 1020927-1 | SECONDARY ACTUATOR ASSY-HPC STATOR | 1 | |
| 1023419-2 | STATOR ASSY-ALTERNATOR | 1 | |
| 10C1045G02 | ADAPTER, ANTI - TORQUE - FAN STATOR TO FAN DISK, | 1 | |
| 10C1052G01 | TOOL, TORQUE - MANIFOLD BUSHING, HPT STATOR | 1 | |
| 10C1077 | FIXTURE - LIFT-HPC STATOR CASE - F | 1 | |
| 10C1077G01 | FIXTURE, LIFT – COMPRESSOR STATOR CASE, FRONT ASSEMBLY (CF34) | 1 | |
| 10C1082 | FIXTURE DUMMY, HPTSTATOR, FORWARD | 1 | |
| 10C1082G02 | FIXTURE, DUMMY - HPT STATOR FORWARD (DUMMY FIXTURE) (RECOMMENDED) | 1 | |
| 10C1149G01 | PROTRACTOR, ELECTRONIC, PORTABLE - VARIABLE STATOR VANE | 1 | |
| 10C1196 | SHIM SET - SUPPORT-LPT ROTOR/STATOR | 1 | |
| 10C1276G01 | ASSEMBLY, PRESEAT - VARIABLE STATOR VANE ACTUATION ARMS (PRESEAT FIXTURE) | 1 | |
| 10C1401G01 | LPT ROTOR/STATOR GUIDE TUBE | 1 | |
| 10C1401P01 | LPT ROTOR/STATOR GUIDE TUBE | 1 | |
| 10C2044G02 | FIXTURE, RESTRAINING LPT ROTOR/STATOR (RESTRAINING FIXTURE) | 1 | |
| 1160-703520 | HOLDER / STATOR ASSEMBLY AND ROTOR ASSEMBLY SEPARATION | 1 | |
| 1160-703521 | CAP / STATOR ASSEMBLY AND ROTOR ASSEMBLY SEPARATION | 1 | |
| 11C3004P02 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE, HYDRAULIC (DELUXE) | 1 | |
| 11C3004P02-PPK | FIXTURE, SHIPPING - FAN STATOR CASE MODULE, GENX-1B/2B | 1 | |
| 11C3143 | FIXTURE, INSTALL-STG 1 HANGER/SUPPORT HPT STATOR CASE | 1 | |
| 11C3199 | FIXTURE - ASSEMBLY LIFT & TURN-FAN STATOR CASE - AFT | 1 | |
| 11C3272 | PIN SET, GUIDE - FAN STATOR | 1 | |
| 11C3272G01 | TOOL - PIN SET FAN STATOR/FAN HUB | 2 | |
| 11C3293 | DUMMY - STATOR - HIGH PRESSURE STATOR ASSEMBLY | 1 | |
| 11C3294 | PIN, GUIDE-HP COMPR FWD STATOR CASE | 1 | |
| 11C3294P05/06 | PIN, GUIDE-HPC FWD STATOR CASE | 1 | |
| 11C3297 | FIXTURE - LIFT-AFT STATOR | 1 | |
| 11C3297G01 | FIXTURE, LIFT-AFT STATOR | 1 | |
| 11C3363G01 | PIN SET, ALIGNMENT - STAGE 5-10 RINGS - HPC STATOR | 1 | |
| 11C3520 | STAND - BUILD UP - LPT ROTOR/STATOR | 1 | |
| 11C3584 | GAGE - PARALLEL BAR - LPT ROTOR/STATOR BUILDUP (GAGE BAR) | 1 | |
| 11C3832 | FIXTURE, PIN ALIGNING ALL STATOR STAGES ? BOOSTER | 1 | |
| 11C4439 | FIXTURE - LIFT & TURN - AFT FAN STATOR CASE ASSY | 1 | |
| 11C4490P02 | FAN STATOR SEPERATION FIXTURE GENX-1B | 1 | |
| 11C4572 | NON-HYDRAULIC FAN STATOR STAND FOR GENX | 1 | |
| 11C4572P01 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE, TWO CRANE TIPPABLE | 1 | |
| 11C4588P01 | FIXTURE-SHIPPING, FAN STATOR CASE MODULE | 1 | |
| 11C4600 | 2B FAN STATOR COVER | 1 | |
| 11C4688G01 | FIXTURE, GUIDE-HPC AFT STATOR WEAR GUIDES | 1 | |
| 11C4689P01 | FIXTURE, INSTALLATION - HPC AFT STATOR WEAR GUIDE | 1 | |
| 1499M62G10 | SHROUD: STATOR,HPT | 1 | |
| 1622M24P01 | PLUG, MACHINE THREAD DRESSER HIGH PRESSURE COMPRESSOR STATOR BREAKDOWN | 1 | |
| 163561 | LEVER,COUNTERTORQUE-CPRSR STATOR VANE ACTUATION ARM | 1 | |
| 1701015 | STATOR ALIGNMENT TOOL | 1 | |
| 18C1233 | FIXTURE, INSTALL - STG 1 HANGER/SUPPORT STATOR CASE - MANUAL | 1 | |
| 1900541 | STATOR ASSEMBLY FIXTURE | 1 | |
| 1C3568G01 | ACTUATOR STATOR | 1 | |
| 1C3569 | PRESSURIZING UNIT, STATOR ACTUATOR | 1 | |
| 1C3569G02 | WRENCH, TORQUE-NUT, RETAINING, COMPRESSOR STATOR ACTUATION ARMS | 1 | |
| 1C5634G01 | FIXTURE, LIFT - LOWER PRESSURE TURBINE STATOR, LOWER | 1 | |
| 1C5635G01 | LIFT FIXTURE - LOW PRESSURE TURBINE STATOR CASE | 1 | |
| 1C5759 | GAGE, CONCENTRICITY-VARIABLE STATOR INTERSTAGE SEA | 1 | |
| 1C5759 REV F | GAGE, CONCENTRICITY-VARIABLE STATOR INTERSTAGE SEAL. FM | 1 | |
| 1C5759G01 | GAGE, CONCENTRICITY, VARIABLE STATOR INTERSTAGE SEAL..TF39 ENGINE AGE | 1 | |
| 1C5797 | DRIVE SET - PT STATOR SHROUDS | 1 | |
| 1C5976G02 | FIXTURE LIFT - VERTICAL COMPRESSOR STATOR HALF | 1 | |
| 1C6057G01 | STAND - PT STATOR CASE | 1 | |
| 1C6073G04 | FIXTURE, LIFT AND TURNOVER - PT STATOR | 1 | |
| 1C6097 | GAGE SET, DROP CHECK - PT STATOR | 1 | |
| 1C6097G03 | GAGE SET, DROP CHECK - PT STATOR | 1 | |
| 1C6104 | FIXTURE, VANE TIP GRINDING - FRONT COMPR STATOR CA | 1 | |
| 1C6193 | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| 1C6193 REV B | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| 1C6216 | GAGE SET-COMPRESSOR STATOR VAN | 1 | |
| 1C6216G01 | GAGE SET-COMPRESSOR STATOR VAN | 1 | |
| 1C6274 | FIXTURE SET, INSPECTION - LPT STATOR SEAL, STG. 2 | 1 | |
| 1C6274 REV B | FIXTURE SET, INSPECTION - LPT STATOR SEAL, STG. 2 | 1 | |
| 1C6279 | FIXTURE SET, INSP LPT STATOR SEAL STG 4 TF39 ENG | 1 | |
| 1C6279 REV B | FIXTURE SET, INSP. LPT STATOR SEAL, STAGE 4 TF39 ENG. | 1 | |
| 1C6280 | FIXTURE , INSP. LPT STATOR SEAL, STG. 3 | 1 | |
| 1C6280 REV C | FIXTURE , INSP. LPT STATOR SEAL, STG. 3 | 1 | |
| 1C6281 | FIXTURE, INSP. LPT STATOR SEAL, STG. 5 | 1 | |
| 1C6281 REV C | FIXTURE, INSP. LPT STATOR SEAL, STG. 5 | 1 | |
| 1C6282 | FIXTURE, INSP. LPT STATOR SEAL, STG. 6 | 1 | |
| 1C6282 REV B | FIXTURE, INSP. LPT STATOR SEAL, STG. 6 | 1 | |
| 1C6795 | GAGE-COMPRESSOR STATOR VANE | 1 | |
| 1C6795G01 | GAGE-COMPRESSOR STATOR VANE | 1 | |
| 1C6847 | SLING LIFT POW.TUR.STATOR CASE | 1 | |
| 1C6847G01 | SLING LIFT POW.TUR.STATOR CASE | 1 | |
| 1C6870 | DOLLY, PLATFORM- LPT STATOR CASE ASSY VERT BUILDUP | 1 | |
| 1C6871 | CASE, DUMMY-LPT STATOR | 1 | |
| 1C6871G01 | CASE, DUMMY - LOW PRESSURE TURBINE STATOR | 1 | |
| 1C6996G02 | FIXTURE CHECK VAR STATOR | 1 | |
| 1C7220 | TRIM KIT, TF39 VARIABLE STATOR VANE | 1 | |
| 1C8031G05 | FIXTURE, HINGE - UPPER COMPRESSOR STATOR CASE | 1 | |
| 1C8032G01 | Fixture, Hinge - Low Pressure Turbine Stator Case | 1 | |
| 1C8032G03 | FIXTURE, HINGE - LOW PRESSURE TURBINE STATOR CASE | 1 | |
| 1C8039G02 | FIXTURE, LIFT JACK - COMPRESSOR STATOR CASES | 1 | |
| 1C8042G01 | Lift Fixture - Power Turbine Stator Case | 1 | |
| 1C8062 | WRENCH, STATOR VANE SPEED SENSOR | 1 | |
| 1C8070 | PROTRACTOR, ELECTRONIC-VARIABLE STATOR VANE | 1 | |
| 1C8322G01 | Fixture, Lift - Low Pressure Turbine Stator, Upper | 1 | |
| 1C8324G01 | Holder Set, Variable Stator Vanes | 1 | |
| 1C8324P02 | Holder Set, Variable Stator Vanes | 1 | |
| 1C8328 | DAMPER SET - COMPR STATOR TIP GRIND | 1 | |
| 1C8330G01 | CASE, DUMMY-COMPRESSOR STATOR | 1 | |
| 1C8343 | FIXTURE SET, TOP HALVING- HP COMPR STATOR CASE | 1 | |
| 1C8343G01 | Fixture Set, Top Halving - HP Compressor Stator Case | 1 | |
| 1C8350 | FIXTURE, LIFT- COMPRESSOR STATOR CASE, UPPER | 1 | |
| 1C8350G01 | Lift Fixture-HPC Stator Casing (LM2500+) | 1 | |
| 1C8353G01 | Fixture, Lift - HPC Stator Casing | 1 | |
| 1C8400 | FIXTURE, SETTING-ACTUATOR, VARIABLE STATOR VANE/IG | 1 | |
| 1C8400G01 | FIXTURE, SETTING - ACTUATOR, VARIABLE STATOR VANE/ IGV | 1 | |
| 1C8400G02 | Fixture, Setting - Actuator, Variable Stator Vane/IGV | 1 | |
| 1C9079G03 A | KIT - POSITION INDICATION, VARIABLE STATOR VANE (VSV) (NON-FADEC ENGINES) | 1 | |
| 1C9116G01 | FIXTURE, LIFT LP ROTOR AND STATOR FWD. | 1 | |
| 1C9338G01 | FIXTURE, RESTRAIN - LPT ROTOR/STATOR FORWARD | 1 | |
| 1C9365 | PROTR ASSY, ELECTRONIC, PORTABLE- VANE STATOR VANE | 1 | |
| 1C9371 | RING ASSEMBLY SUPPORT IGV STATOR CASE | 1 | |
| 1C9371G01 | RING ASSY - SUPPORT IGV STATOR CASE | 1 | |
| 1C9385G01 | FIXTURE, SUPPORT-LPC ROTOR/STATOR | 1 | |
| 1C9403 | FIXTURE, SETTING- ACTUATOR, VARIABLE STATOR VANE/I | 1 | |
| 1C9412P01 | FIXTURE, RETENTION, HPC VARIABLE STATOR VANE | 1 | |
| 1C9414 | LOWER LOCK/HPC STATOR CASE | 1 | |
| 1C9620G01 | Gage Inspection - Fan Shaft To Hpt Stator Case | 1 | |
| 1R18045 | STAGE 6 STATOR, MEASURING | 1 | |
| 1R18209 | Fixture, Grinding - HP Compressor, Stage 6 Variable Stator Vanes | 1 | |
| 1R18527 | STAGE 8 STATOR TIP | 1 | |
| 1R18664 | containment ring - Machine the Stator Vane Tips and the Rotor Path Ring Liners | 1 | |
| 1R18668 | containment ring - Machine the Stator Vane Tips and the Rotor Path Ring Liners | 1 | |
| 1R18670 | containment ring - Machine the Stator Vane Tips and the Rotor Path Ring Liners | 1 | |
| 2123M63P03 | STATOR ALTERNATOR | 1 | |
| 21C14045G03 | PIN SET, ALTERNATOR STATOR GUIDE | 1 | |
| 21C3110-034 | STATOR VANE GAGE | 1 | |
| 21C3110-036 | STATOR VANE GAGE | 1 | |
| 21C3110-038 | STATOR VANE GAGE | 1 | |
| 21C3110-040 | STATOR VANE GAGE | 1 | |
| 21C3110-042 | STATOR VANE GAGE | 1 | |
| 21C3110-044 | STATOR VANE GAGE | 1 | |
| 21C5400P01 | GRINDER, VERTICAL, COMPRESSOR STATOR | 1 | |
| 21C5627P01 | FIXTURE, GRIND - COMPRESSOR STATOR | 1 | |
| 21C5628P01 | FIXTURE, GAGING - COMPRESSOR STATOR | 1 | |
| 21C613P01 | LIFTING COMPRESSOR STATOR | 1 | |
| 21C7048G01 | FXTURE,GRIND,GAS GEN STATOR | 1 | |
| 21C7090G02 | SET, COMPRESSOR STATOR MEASUREMENT FIXTURES (CONSISTING OF) | 1 | |
| 21C7092G02 | SET, COMPRESSOR STATOR LANDS/VANES GRINDING FIXTURES (CONSITING OF) | 1 | |
| 21C7112G01 | BAR , STATOR | 1 | |
| 21C7212G01 | FIXTURE COMPRSSR STATOR MEASUREMT | 1 | |
| 21C7213G012 | COMPRESSOR STATOR | 1 | |
| 21C7213G02 | MASTER, COMPRESSOR STATOR | 1 | |
| 21C7732G01 | GG STATOR FLUSH FIXTURE | 1 | |
| 21C7821G01 | FIXTURE, GAS GENERATOR STATOR ASSEMBLY | 1 | |
| 21C8112G01 | PUSHER FAN STATOR STAGES 2 AND 3 VANE | 1 | |
| 21C8126G01 | PUSHER FAN STATOR VANE LEVER | 1 | |
| 2214-1T1 | TOOL REMOVAL STATOR | 1 | |
| 2214-1T2 | TOOL INSTALATION STATOR | 1 | |
| 2558696 | BRAKE DISC ALIGNING TOOL USED TO ALIGN THE CARBON ROTORS AND THE STATORS FOR INSTALLATION OF THE WHEEL AND TIRE ASSEMBLY ON THE AIRCRAFT. | 1 | |
| 23033041 | RINGS--INSPECTION AND GRINDING, COMPRESSOR STATOR VANE ID | 1 | |
| 23054787 | Ring - Cryogenic,2nd & 3rd Stator Wheel Assembly, LP Turbine Rotor | 1 | |
| 2608978-1 | TUBE, STATOR TORQUE | 2 | |
| 2608979-1 | ASSEMBLEY STATOR TORQUE TUBE | 1 | |
| 27-1338-0123-0 | TOOL DISASSEMBLY OF STATOR ASSEMBLY | 1 | |
| 27-1338-0123-01 | TOOL ASSEMBLY OF STATOR ASSEMBLY | 1 | |
| 27-1338-0123-03 | DISASSEMBLY STATOR ASSEMBLY | 1 | |
| 271338012301 | TOOL-STATOR ASSY | 1 | |
| 281887-1-1 | STATOR HOLDER | 1 | |
| 2840-00-337-4341 | ARM ASSEMBLY, COMPRESSOR STATOR LINKAGE | 1 | |
| 2847M89G01 | TRENCH FILLER-FAN STATOR ASSEMBLY | 1 | |
| 289742-1 | PULLER STATOR COOLING FAN | 1 | |
| 294154-1 | EXPANDER, STATOR FAN | 1 | |
| 294458-1 | THIRD STAGE LP STATOR FIXTURE | 1 | |
| 296395-1 | STATOR ASSEMBLY HOLDING FIXTURE | 1 | |
| 2C 14699G02 | FIXTURE, LIFT-COMPRESSOR STATOR VANE SPACER | 1 | |
| 2C14043G05 | STG.1 LPT STATOR FIXTURE | 1 | |
| 2C14103G01 | DUMMY – HIGH PRESSURE COMPRESSOR STATOR | 1 | |
| 2C14103G02 | CASE, DUMMY-COMP. STATOR | 1 | |
| 2C14103G02TK | CASE, DUMMY-COMP. STATOR | 1 | |
| 2C14126G01TK | FIXTURE, LIFT-COMP. STATOR CASE-UPPER | 1 | |
| 2C14156 | FIXTURE, GRIND VANE TIPS COMP. STATOR ASSY | 1 | |
| 2C14156 REV N | FIXTURE, GRIND VANE TIPS COMP. STATOR ASSY | 1 | |
| 2C14232 | INDICATOR SET-VARIABLE STATOR VANE POSITION | 1 | |
| 2C14276 | GAGE, INSPECT. FAN SHAFT TO HPT STATOR CASE | 1 | |
| 2C14276 REV A | GAGE, INSPECT. FAN SHAFT TO HPT STATOR CASE | 1 | |
| 2C14276G01 | GAGE INSPECTION - FAN SHAFT TO HPT STATOR CASE | 1 | |
| 2C14276G01TK | GAGE, INSPECTION-FAN SHAFT TO HPT STATOR CASE | 1 | |
| 2C14684 | TOOL SET, REMOVE HP COMPR. STATOR VANE SPRINGS | 1 | |
| 2C14684 REV D | TOOL SET, REMOVE HP COMPR. STATOR VANE SPRINGS | 1 | |
| 2C14684G02 | TOOL SET, REMOVAL-HPC STATOR VANE SPRINGS | 4 | |
| 2C14685 | ADAPTER - FAN STATOR TO FAN DISK | 1 | |
| 2C14685 REV A | ADAPTER, ANTI-TORQUE-FAN STATOR TO FAN DISK | 1 | |
| 2C14685G01 | ADAPTER, ANTI‐TORQUE ‐ FAN STATOR TO FAN DISK | 1 | |
| 2C14699 | FIXTURE, LIFT-COMPR. STATOR CASE, ,UPPER | 2 | |
| 2C14699 REV D | FIXTURE, LIFT-COMPR. STATOR CASE, ,UPPER | 1 | |
| 2C14699G01 | FIXTURE LIFT COMP STATOR HALF | 2 | |
| 2C14699G02 | FIXTURE, LIFT-COMPRESSOR STATOR VANE SPACER | 1 | |
| 2C14712 | FIXTURE, LIFT-COMPR. STATOR CASE, ,UPPER | 1 | |
| 2C14712 REV D | FIXTURE, LIFT-COMPR. STATOR CASE, ,UPPER | 1 | |
| 2C14717 | ADAPTER SET, PEDESTAL - FAN STATOR FWD | 1 | |
| 2C14717 REV A | ADAPTER SET, PEDESTAL - FAN STATOR FWD | 1 | |
| 2C14717G01 | ADPT, FAN STATOR CAS | 4 | |
| 2C14722 | FIXTURE, RUNOUT - FAN STATOR | 2 | |
| 2C14722 REV A | FIXTURE, RUNOUT-FAN STATOR, ASSEMBLED ENGINE | 1 | |
| 2C14722G01 | RUNOUT FIXTURE FAN STATOR | 3 | |
| 2C14722G01TK | FIXTURE, RUNOUT-FAN STATOR ASSEMBLED ENGINE | 1 | |
| 2C14730 | ADAPTERS, PEDESTAL-COMP. STATOR FWD | 1 | |
| 2C14730 REV B | ADAPTERS, PEDESTAL-COMP. STATOR FWD | 1 | |
| 2C14730G01 | ADAPTER PEDESTAL COMPRESSOR STATOR FWD | 2 | |
| 2C14730P03 | ADAPTER, PEDESTAL – COMPRESSOR STATOR, FWD | 1 | |
| 2C14735G01 | FAN STATOR SUPPORT | 1 | |
| 2C14737G01 | ADAPTER, LIFT ‐ AFT STATOR/FRAME, HORIZONTAL | 1 | |
| 2C14751G01 | FIXTURE, LIFT – FAN STATOR FWD | 3 | |
| 2C14761 | CONTAINER,SHIPPING- FAN STATOR | 1 | |
| 2C14761 REV C | CONTAINER,SHIPPING- FAN STATOR | 1 | |
| 2C14762G01 | FIXTURE, HOLDING ‐ ROTOR/STATOR LPT ‐ SPLIT ENGINE | 1 | |
| 2C14779G02 | TOOL SET, ALIGNMENT COMP. STATOR HORIZONTAL. FLANGE | 1 | |
| 2C14784G01 | TOOL SET, REMOVAL AND INSTALLATION,HPC STATOR VANE OUTER AIR SEAL | 1 | |
| 2C14791G01 | CLAMP, RETAINING, STAGE 1 HPT STATOR SHROUD SUPPORT | 1 | |
| 2C14970 | TRIMMER, VARIABLE STATOR VANE | 1 | |
| 2C14974G02 | FIXTURE RUNOUT - FAN STATOR, ASSEMBLED ENGINE | 2 | |
| 2C18000 | FIXTURE, SUPPORT-LP TURB,ROTOR/STATORFORWARD | 1 | |
| 2C18003G01 | GAGE, LPT ROTORSTATOR | 1 | |
| 2C18004G01 | FIXTURE,RESTRAINT,LPT ROTORSTATOR,AFT | 1 | |
| 2C18051 | FIXTURE RUNOUT - FAN STATOR, ASSEMBLED ENGINE | 1 | |
| 2C18051G01 | FIXTURE RUNOUT - FAN STATOR, ASSEMBLED ENGINE | 1 | |
| 2C5084G01 | HOLDER, COMPRESSOR STATOR REAR | 1 | |
| 2C5131 | CASING - DUMMY - LPT STATOR | 1 | |
| 2C5267G01 | FIXTURE, HPT STATOR CONCENTRICITY | 1 | |
| 2C6015 | GAGE SET, BOROSCOPE OPENING-COMPRESSOR STATOR | 1 | |
| 2C6015 REV C | GAGE SET, BOROSCOPE OPENING-COMPRESSOR STATOR | 1 | |
| 2C6015G01 | GAGE SET - BORESCOPE OPENING, COMPRESSOR STATOR | 1 | |
| 2C6016 | FIXTURE VERTICAL LIFT-COMPRESSOR STATOR HALF | 1 | |
| 2C6016G04 | FIXTURE , VERTICAL LIFT COMPRESSOR STATOR HALF | 2 | |
| 2C6018 | TOOL SET, HOLDING - VARIABLE STATOR VAN | 1 | |
| 2C6018 REV NC | TOOL SET, HOLDING - VARIABLE STATOR VAN | 1 | |
| 2C6018G01 | TOOL SET,HOLDING-VARIABLE STATOR VANE | 4 | |
| 2C6019 | DRIVER SET-COMPRESSOR STATOR VANE | 1 | |
| 2C6019 REV D | DRIVER SET-COMPRESSOR STATOR VANE | 1 | |
| 2C6019G01 | DRIVER SET - COMPRESSOR STATOR VANE | 1 | |
| 2C6019G01TK | DRIVER SET-COMP. STATOR VANE (3 Parça) | 1 | |
| 2C6019G01 | DRIVER SET-COMPRESSOR STATOR V | 1 | |
| 2C6019G03 | DRIVER SET, HPC STATOR VANE | 1 | |
| 2C6162 | PLATFORM, REMOVAL, VERT. COMPR. STATOR CASE | 1 | |
| 2C6162 REV D | PLATFORM, REMOVAL, VERT. COMPR. STATOR CASE | 1 | |
| 2C6162G04 | PLATFORM, REMOVAL, VERTICAL - COMPRESSOR STATOR CASING | 1 | |
| 2C6171 | HOLDER SET, VARIABLE STATOR VANES | 1 | |
| 2C6171 REV B | HOLDER SET, VARIABLE STATOR VANES | 1 | |
| 2C6172 | CASE, DUMMY - COMPRESSOR STATOR | 1 | |
| 2C6172 REV C | CASE, DUMMY - COMPRESSOR STATOR | 1 | |
| 2C6172G02 | CASE, DUMMY - COMPRESSOR STATOR | 1 | |
| 2C6175G04 | FIXTURE, LIFT - COMPRESSOR STATOR CASE, UPPER | 1 | |
| 2C6178 | FIXTURE, POSITIONING COMPR. STATOR | 1 | |
| 2C6259 | FIXTURE, SET SECURE-VARIABLE STATOR ARMS, STG. 3 - 6 | 1 | |
| 2C6259 REV P | FIXTURE, SET SECURE-VARIABLE STATOR ARMS, STG. 3 - 6 | 1 | |
| 2C6259G03 | TOOL - FIXT SET SECURE VARI STATOR | 1 | |
| 2C6259G04 | FIXTURE SET- STAGE 3 THROUGH 6 VARIABLE STATOR ARMS SECURE | 1 | |
| 2C6259G05 | FIXTURE, HOLDING - VARIABLE STATOR ARMS, | 1 | |
| 2C6353 | TOOL,REMOVAL-ACOUSTIC PANELS,FAN STATOR | 1 | |
| 2C6358G01TK | ADAPTERS, PEDESTAL FAN STATOR, FORWARD | 1 | |
| 2C6360G01 | ADAPTER, PEDESTAL-COMPRESSOR STATOR, FORWARD | 2 | |
| 2C6361G01TK | ADAPTERS, PEDESTAL COMP. STATOR-FWD. | 1 | |
| 2C6395 | ACTUATOR-VARIABLE STATOR VANES AND BYPASS VALVE | 2 | |
| 2C6395G05 | ACTUATOR - HYDRAULIC, PORTABLE, VSV STATOR - CFM56-7/CFM56-3 | 7 | |
| 2C6451 | SET,TRANSMITTER-VARIABLE STATOR VANE POSITION | 1 | |
| 2C6459 | PROTRACTOR, ELECTRONIC- VARIABLE STATOR VANE, PORT | 1 | |
| 2C6459G11 | PROTRACTOR, ELECTRONIC- VARIABLE STATOR VANE, PORT | 1 | |
| 2C6487G06 | PROTRACTOR, ELECTRONIC PORTABLE VARIABLE STATOR | 1 | |
| 2C6488G03 | KIT - READOUT, VARIABLE STATOR VANE (VSV) | 1 | |
| 2C6488G04 | KIT - READOUT, VARIABLE STATOR VANE (VSV) | 1 | |
| 2C6504 | FIXTURE, GRINDING STATOR ASSY, COMPR | 1 | |
| 2C6529 | ONE SET ASSY. SNUBBER SET, GRINDING-COMPR STATOR V | 1 | |
| 2C6646 -LMT | GAGE BLOCK, COMPRESSOR STATOR VANE ACTUATION ARM | 1 | |
| 2C6646G01 | GAGE BLOCK, COMP STATOR VANE STG 4 | 1 | |
| 2C6647 | WRENCH, SPANNER-COMPR. STATOR VANE SPACER | 1 | |
| 2C6647 REV NC | WRENCH, SPANNER-COMPR. STATOR VANE SPACER | 1 | |
| 2C6647G01 | TOOL - WRENCH COMP STATOR VANE | 4 | |
| 2C6834 | ADAPTER, ANTITORQUE - FAN STATOR TO DISK | 1 | |
| 2C6925 | GAGE, SET-VARIABLE STATOR VANE CLEVIS ASSEMBLIES | 2 | |
| 2C6925G02 | SET-VARIABLE STATOR VANE CLEVIS ASSEMBLIES | 1 | |
| 2C6925G05 | GAGE, SET - VARIABLE STATOR VANE CLEVIS ASSEMBLIES | 1 | |
| 2C6951G01 | FIXTURE RUN-OUT STATOR FAN | 2 | |
| 2C6962 | GAGE SET,SIGHT-CPRSR STATOR VANE ACTUATION ARMS | 3 | |
| 2C6962 REV D | GAGE SET, SIGHT-COMPR. STATOR VANE ACTUATION ARMS | 1 | |
| 2C6962G02 | GAGE, SIGHT - COMPRESSOR STATOR VANE ARMS | 1 | |
| 2C6962G03 | GAGE SET, SIGHT-COMPR STATOR VANE ACTUATION ARMS | 5 | |
| 2C6962G05 | GAGE SET, SIGHT - COMPR STATOR VANE ACTUATION ARMS | 8 | |
| 2C6963 | GAGE SET, COMPR. STATOR VANE ACT. ARMS | 1 | |
| 2C6963 REV C | GAGE SET, COMPR. STATOR VANE ACT. ARMS | 1 | |
| 2C6963G04 | GAUGE SET COMP STATOR VAN ARMS | 2 | |
| 2C6964 | WRENCH, TORQUE BREAKING-COMPR. STATOR ACT. ARM RTNG N | 1 | |
| 2C6964 REV E | WRENCH, TORQUE BREAKING-COMPR. STATOR ACT. ARM RTNG N | 1 | |
| 2C6964G04 | WRENCH, TORQUE BREAKING, COMPRESSOR STATOR ACTUATION ARM RETAINING NUT | 3 | |
| 2C6966 | GAGE SET-COMPRESSOR STATOR ACTUATION ARMS | 3 | |
| 2C6966 REV F | GAGE SET, COMPR. STATOR VANE ACT. ARMS | 1 | |
| 2C6966G05 | GAGE, SIGHT - COMPRESSOR STATOR VANE ACT ARMS 2C6966G05 | 7 | |
| 2C6966G07 | GAGE SET, COMPR. STATOR VANE ACT. ARMS | 3 | |
| 2C6987G03 | FIXTURE, RUNOUT – FAN STATOR CASE | 1 | |
| 2C6I62 | PLATFORM, REMOVAL, VERT. COMPR. STATOR CASE | 1 | |
| 2C6I72 | CASE, DUMMY - COMPRESSOR STATOR | 1 | |
| 2C6I78 | FIXTURE, POSITIONING COMPR. STATOR | 1 | |
| 2C6I7I | HOLDER SET, VARIABLE STATOR VANES | 1 | |
| 2C7350G04 | Gage Set, Insp, Comp Stator Vane Platform | 1 | |
| 2C7373 | SEATING TOOL SET, VANE LINER, COMPR STATOR CASE-FR | 1 | |
| 2C7373 REV J | SEATING TOOL SET, VANE LINER, COMPR STATOR CASE-FRNT & RE | 1 | |
| 2C7373G01 | SEATING TOOL, VANE LINER, COMPRESSOR STATOR CASE - FRONT & REAR | 1 | |
| 2C7373G02 | SEAT TOOL - COMPRESSOR STATOR FIXED VANES LINER INSTALLATION | 1 | |
| 2C7373G03 | SEATING TOOL, VANE LINER, COMPRESSOR STATOR CASE - FRONT & REAR | 1 | |
| 2C7373G04 | SEAT TOOL - COMPRESSOR STATOR FIXED VANES LINER INSTALLATION | 1 | |
| 2C7373G05 | SEATING TOOL, VANE LINER, COMPRESSOR STATOR CASE - FRONT & REAR | 1 | |
| 2C7373G06 | SEATING TOOL, VANE LINER, COMPRESSOR STATOR CASE - FRONT & REAR | 1 | |
| 2C7373G07 | SEAT TOOL - COMPRESSOR STATOR FIXED VANES LINER INSTALLATION | 1 | |
| 2C7373G08 | SEAT TOOL - COMPRESSOR STATOR FIXED VANES LINER INSTALLATION | 1 | |
| 2C7842G08 | GAGE - COMPR. STATOR VANE | 1 | |
| 2C7842P31 | Gage Set, Length Compressor Stator Vanes | 1 | |
| 2C8008 | FIXTURE, REMOVAL - FAN STATOR FAIRING | 1 | |
| 2C8008 REV A | FIXTURE, REMOVAL - FAIRING, FAN STATOR | 1 | |
| 2C8008G01 | Fixture, Remove - Fan Stator Fairing | 4 | |
| 2C8008G01TK | FIXTURE, REMOVAL-FAIRING, FAN STATOR | 1 | |
| 2C8016 | GAGE,SIGHT-VARIABLE STATOR VANE-STG 5 AND 6 | 2 | |
| 2C8016 REV A | GAGE, SIGHT-VARIABLE STATOR VANE STG. 5 & 6 | 1 | |
| 2C8016G02 | SIGHT GAGE - VARIABLE STATOR VANE, STAGES 5 AND 6 | 4 | |
| 2C8016G03 | GAGE,SIGHT-VARIABLE STATOR VANE-STG 5 AND 6 | 2 | |
| 2C80616G01 | GAGE,SIGHT-VARIABLE STATOR VANE-STG 5 AND 6 | 1 | |
| 2C80I6 | GAGE, SIGHT-VARIABLE STATOR VANE STG. 5 & 6 | 1 | |
| 2C81186G01 | CASING, DUMMY, HPC STATOR | 1 | |
| 2C81208G01 | ADAPTER, HOIST, HPC STATOR | 1 | |
| 2C81209G01 | PUSHER, VANE LEVER - HPC STATOR | 1 | |
| 2C81214G02 | PUSHER, STATOR VANE SEGMENT | 1 | |
| 2C81220G01 | FXTR,INSTAL-COMP.STATOR | 1 | |
| 2C81225 | FIXTURE, HOLDING HPC STATOR | 1 | |
| 2C81225G01 | FIXTURE, HOLDING, HPC STATOR | 1 | |
| 2C81226 | FIXTURE, RESTAINING HPC STATOR | 1 | |
| 2C81226P02 | FIXTURE, HPC STATOR SHIM AND KEY | 1 | |
| 2C81431G01 | FIXTURE, HOLDING - HPT ROTOR/STATOR (ROTOR HOLDING FIXTURE) | 1 | |
| 2C81444G02 | FIXTURE, GRIND - HPT STATOR | 1 | |
| 2C90014 | DAMPENER, GRINDING, VANES COMPRESSOR, STATOR CT7-8 STG 1 | 1 | |
| 2C90112G01 | BAR , STATOR | 1 | |
| 2C90399G01 | DEVICE FOR INSTALLATION OF THE GAS GENERATOR (GG) STATOR | 1 | |
| 2C90413G01 | DEVICE FOR INSTALLATION OF THE GAS GENERATOR STATOR | 1 | |
| 2C90595G01 | FIXTURE, GAS GENERATOR STATOR ASSEMBLY | 1 | |
| 2C91008 | GAGE VARIABLE VANE ANGLE, COMPRESSOR STATOR | 1 | |
| 2C91008G01 | GAGE VARIABLE VANE ANGLE, COMPRESSOR STATOR | 1 | |
| 2C91008P01 | GAGE, COMPRESSOR STATOR VARIABLE VANE ANGLE | 1 | |
| 2C91038G01 | HOLDER, COMPRESSOR STATOR CASING HALF | 1 | |
| 2C91039G02 | KIT, STATOR VANE REMOVAL | 1 | |
| 2C91101G01 | FIXTURE, HPT STATOR SHROUD (GRINDING) | 1 | |
| 2C91132G01 | FIXTURE-HPT STATOR | 1 | |
| 2C91252G01 | STAND - FAN STATOR BUILD UP | 1 | |
| 2C91344G01 | FIXTURE, LPT STATOR GRIND | 1 | |
| 2C91349G01 | HOLDER, COMPRESSOR STATOR CASING HALF | 1 | |
| 2C91367G01 | HPT STATOR INSTALLATION FIXTURE | 1 | |
| 30G1412 | PIN SHOULDER COMPRESSOR STATOR SYNCHRONIZING RING ARM | 1 | |
| 30G1894 | LUG ANTI ROTATION HPC STATOR 4-7 STAGE | 1 | |
| 30G1896 | LUG ANTI ROTATION HPC STATOR 5-7 STAGE BORESCOPE SEGMENT | 1 | |
| 30G2664 | PIN SHOULDER COMPRESSOR STATOR SYNCHRONIZING RING ARM | 1 | |
| 30G2994 | ARM ASSY OF COMPRESSOR STATOR SYNCHRONIZING RING | 1 | |
| 30G2995 | ARM ASSY OF COMPRESSOR STATOR SYNCHRONIZING RING | 1 | |
| 3200 | HPC-STATOR | 1 | |
| 37D403063G01 | RING, HPT STATOR GRINDING | 1 | |
| 37D403063P02 | SPACER, HPT STATOR GRINDING | 1 | |
| 3844799-2 | BOLT STG 1 STATOR | 1 | |
| 40010 | STATOR / COIL ASSEMBLY | 4 | |
| 4040894-001 | TOOL, STATOR ALIGNMENT STEM | 1 | |
| 62875 | STATOR PLATE | 1 | |
| 68506 | LP TURBİNE ROTOR ASSY AND STATOR CASE | 1 | |
| 71637 | FIRST STAGE STATOR PULLER | 1 | |
| 77145 | SECOND STAGE STATOR PULLER | 1 | |
| 508515 | STATOR, CALIBRATION STANDARD | 1 | |
| 834726 | Installation and Removal, Stator Pins | 1 | |
| 4026733 | ARM,COMPRESSOR STATOR LINKAGE | 1 | |
| 6796761 | Comp Stator Vane Corrugated Seal fixture | 1 | |
| 6798230 | RINGS- INSPECTION, COMP. STATOR | 1 | |
| 6799630 | COMP. RTR LAYBRINTH STATOR SEAL CHECKING FIXTURE | 1 | |
| 6872806 | FIXTURE - WELD, COMPRESSOR STATOR VANE ASSY | 1 | |
| 4133860150 | TOOL INSERTION STATOR | 1 | |
| 4133860560 | TOOL DISASSEMBLY OF STATOR ASSEMBLY | 1 | |
| 4610147510 | STATOR INSTALLATION TOOL | 1 | |
| 4610147513 | STATOR EXTRACTING TOOL | 1 | |
| 4617001879 | STATOR DISASSEMBLY TOOL | 1 | |
| 4618012500 | STATOR INSERT REMOVAL TOOL | 1 | |
| 4618118501 | STATOR INSTALLATION TOOL | 1 | |
| 4618118501-VST | STATOR INSTALLATION TOOL | 1 | |
| 4618159525 | STATOR INSTALL TOOL | 1 | |
| 4920-01-520-5481 | STRAP LOCKING FAN STATOR | 1 | |
| 4AA617-6325-001 | RESOLVER STATOR MOUNTING TOOL | 1 | |
| 518060-15 | MOTOR STATOR ASSEMBLY | 1 | |
| 558-1-05945 | ROTATION INDICATION FIXTURE,STATOR ASSY | 1 | |
| 570-3762-01 | STATOR REMOVAL TOOL | 1 | |
| 6047T55P02 | ALTERNATOR STATOR | 1 | |
| 605750-85 | GRINDING FIXTURE STATORS | 1 | |
| 6AA617-6325-001 | RESOLVER STATOR WINDING PRESS TOOL | 1 | |
| 7200TD13944 | PW2K Stator Installation Table (rework) | 1 | |
| 7C2575 | KIT WRENCH TORQUE LOOSEN NUT FLANGE STATOR CASE FWD HPC | 1 | |
| 800024-91 | FRICTION PAD AND STATOR ELEMENT RIVETTING FIXTURE | 1 | |
| 834279-1 | STATOR ASSEMBLY STAND | 1 | |
| 834726-1 | STATOR PIN, INSTALLATION AND REMOVAL TOOL | 1 | |
| 834949-1 | SECOND STAGE STATOR SUPPORT | 1 | |
| 85642730G03 | FIXTURE，ASSY/DISASSY - LPT ROTOR/STATOR | 1 | |
| 856A 2357G01 | FIXTURE RESTRAINING LPT. ROTOR TO STATOR | 1 | |
| 856A 2426G01 | FIXTURE TURNNION ROTOR/STATOR LPT. | 1 | |
| 856A1006 | ADAPTER TORQUE-COMPR. STATOR NUTS | 1 | |
| 856A1006 G01 | Torque Adapter Wrench - Compressor Stator To Support | 11 | |
| 856A1006 REV F | ADAPTER TORQUE-COMPR. STATOR NUTS | 1 | |
| 856A1006G01 | ADAPTER, TORQUE - COMPR STATOR | 11 | |
| 856A1011 | PROTRACTOR-MACHINING VARIABLE STATOR VANE | 1 | |
| 856A1011 REV AG | PROTRACTOR-MACHINING VARIABLE STATOR VANE | 1 | |
| 856A1011G05 | PROTRACTOR-MECH VAR STATOR VANE;SEE M1 | 2 | |
| 856A1011G07 | PROTRACTOR - MECHANICAL VARIABLE STATOR | 5 | |
| 856A1011G13 | PROTRACTOR-MECHANICAL VARIABLE STATOR VANE | 1 | |
| 856A1011G16 | PROTRACTOR - MECHANICAL VARIABLE STATOR VANE | 3 | |
| 856A1011G17 | PROTRACTOR - MECHANICAL VARIABLE STATOR | 10 | |
| 856A1012 | LEVER,COUNTERTORQUE-CPRSR STATOR VANE ACTUATION ARM | 1 | |
| 856A1012 G01 | Countertorque Lever - Compressor Stator Vane Actuator | 16 | |
| 856A1012G01 | LEVER ANTI TORQUE HPC STATOR | 16 | |
| 856A1013 P01 | Holder - Variable Stator Vane | 2 | |
| 856A1013P01 | HOLDER - VARIABLE STATOR VANE | 2 | |
| 856A1036G01 | WRENCH, TORQUE ADAPTER - COMPRESSOR STATOR TO SUPP | 1 | |
| 856A1051 | PULLER,ARM-COMPRESSOR STATOR ACTUATION | 2 | |
| 856A1051 G01 | Puller Arm ‐ Compressor Stator Actuation | 6 | |
| 856A1051 REV D | PULLER, ARM COMPRESSOR STATOR ACTUATION | 1 | |
| 856A1051G01 | Puller Arm - Compressor Stator | 6 | |
| 856A1051G02 | PULL STATOR ACT ARM | 17 | |
| 856A1056 | Fixture Grind Compr Stator Flow Path | 1 | |
| 856A1056 G05 | Fixture, Grind - Compressor Stator Flowpath | 8 | |
| 856A1056G01 | FIXTURE,GRIND - COMPR STATOR FLOWPATH | 1 | |
| 856A1056G02 | FIXTURE,GRIND - COMPR STATOR FLOWPATH | 1 | |
| 856A1056G03 | FIXTURE,GRIND - COMPR STATOR FLOWPATH | 1 | |
| 856A1056G04 | FIXTURE,GRIND - COMPR STATOR FLOWPATH | 5 | |
| 856A1056G05 | FIXTURE,GRIND - COMPR STATOR FLOWPATH | 8 | |
| 856A1062G03 | TOOL-SET COMPR STATOR SECTORS | 6 | |
| 856A1063 | TOOL - SET COMPR STATOR SECTORS & LINERS INSTALLATION | 1 | |
| 856A1063G01 | TOOL - SET COMPR STATOR SECTORS & LINERS INSTALLATION | 1 | |
| 856A1063G02 | TOOL - SET COMPR STATOR SECTORS & LINERS INSTALLATION | 1 | |
| 856A1063G03 | TOOL - SET COMPR STATOR SECTORS & LINERS INSTALLATION | 3 | |
| 856A1063G04 | TOOL - SET COMPR STATOR SECTORS & LINERS INSTALLATION | 1 | |
| 856A1063G05 | TOOL - SET COMPR STATOR SECTORS & LINERS INSTALLATION | 3 | |
| 856A1063G06 | TOOL-SET COMPR STATOR SECTORS & LINERS INSTALLATION | 5 | |
| 856A1063G07 | TOOL - SET COMPR STATOR SECTORS & LINERS INSTALLATION | 8 | |
| 856A1063G07 | TOOL-SET COMPR STATOR SECTORS & LINERS INSTALLATION | 8 | |
| 856A1071 | TOOL SET,REMOVAL - COMPR STATOR LINERS & VANE SEGMENTS | 1 | |
| 856A1071G01 | TOOL SET,REMOVAL - COMPR STATOR LINERS & VANE SEGMENTS | 1 | |
| 856A1071G02 | TOOL SET,REMOVAL - COMPR STATOR LINERS & VANE SEGMENTS | 1 | |
| 856A1071G03 | TOOL SET,REMOVAL - COMPR STATOR LINERS & VANE SEGMENTS | 1 | |
| 856A1071G04 | TOOL SET,REMOVAL - COMPR STATOR LINERS & VANE SEGMENTS | 1 | |
| 856A1071G05 | Tool Set-Rem Comp Stator | 2 | |
| 856A1071G06 | TOOL SET,REMOVAL - COMPR STATOR LINERS & VANE SEGMENTS | 7 | |
| 856A1071G07 | TOOL SET, REMOVAL COMPRESSOR STATOR LINERS AND VANE SEGMENTS | 1 | |
| 856A1084 | CART-STATOR ACTUATOR | 6 | |
| 856A1084 (G04) | CART - STATOR ACTUATOR | 27 | |
| 856A1084G01 | CART, STATOR ACTUATOR (ACTUATOR CART) | 7 | |
| 856A1084G02 | ACTUATOR STATOR PORT -2/-3 ENG | 17 | |
| 856A1084G03 | CART STATOR ACTUATOR | 6 | |
| 856A1084G04 | ACTUATOR STATOR PORT -5 ENG | 27 | |
| 856A1084P17 | COMPRESSOR FRONT STATOR ASSEMBLY | 1 | |
| 856A1100 | INSTALL, PIN HPT STATOR | 1 | |
| 856A1100G01 | INSTALL PIN HPT STATOR | 4 | |
| 856A1110 | STAND, INSTALLATION - FRONT COMPR STATOR SECTOR AND LINER | 1 | |
| 856A1110G05 | STAND, INSTALLATION - FRONT COMPRESSOR STATOR SECTOR AND LINER | 7 | |
| 856A1112 | STAND, INSTALLATION-REAR COMPPESSOR STATOR | 1 | |
| 856A1112G01 | STAND, INSTALLATION-REAR COMPRESSOR STATOR | 3 | |
| 856A1112G02 | STAND, INSTALLATION-REAR COMPRESSOR STATOR | 6 | |
| 856A1126 | DRIVER SET, GUIDE STRIPS - COMPR STATOR | 1 | |
| 856A1126G01 | DRIVER SET, GUIDE STRIPS-COMPR STATOR | 1 | |
| 856A1126G02 | DRIVER SET, GUIDE STRIPS-COMPR STATOR | 6 | |
| 856A1126G03 | DRIVER SET, GUIDE STRIPS-COMPR STATOR | 3 | |
| 856A1126G04 | DRIVER SET, GUIDE STRIPS-COMPR STATOR | 9 | |
| 856A1162G02 | DRIVER GUIDE STRIPS COMPRESSOR STATOR | 1 | |
| 856A1169G02 | FIXTURE, LIFT-HP COMP STATOR FWD | 4 | |
| 856A1180 | FIXTURE, REMOVAL - HPT STATOR/LPT NOZZLE MODULE | 1 | |
| 856A1180G02 | FIXTURE, REMOVAL - HPT STATOR/LPT NOZZLE MODULE | 1 | |
| 856A1194 | FIXTURE, MEASURE-VARIABLE STATOR VANE MOVEMENT | 1 | |
| 856A1194G05 | FIXTURE, MEASURE-VARIABLE STATOR V ANE MOVEMENT | 1 | |
| 856A1194G06 | FIXTURE, MEASURE-VARIABLE STATOR | 2 | |
| 856A1214P03 | SET TRANSMITTER INDICATOR, VARIABLE STATOR POSITION/N2 CORE SPEED | 1 | |
| 856A1221G01 | PIN SET RIG VARIABLE STATOR | 16 | |
| 856A1256 | GAGE SET, HPC STATOR | 1 | |
| 856A1256G01 | Gauge Set Stator | 4 | |
| 856A1313G03 | RING SUPPORT -FAN STATOR FLANGE | 4 | |
| 856A1331 | GAGE,SET-IGV, STG. 1,2,3 CAR. STATOR VANE CLEVIS | 1 | |
| 856A1331 REV D | GAGE,SET-IGV, STG. 1,2,3 CAR. STATOR VANE CLEVIS | 1 | |
| 856A1331G04 | GAGE SET - IGV, STAGE 1, 2 AND 3 VARIABLE STATOR VANE CLEVIS ASSEMBLIES | 1 | |
| 856A1387 | GAGE THICKNESS VANE SECTOR COMPRESSOR STATOR | 1 | |
| 856A1387G01 | GAGE THICKNESS VANE SECTOR COMPRESSOR STATOR | 3 | |
| 856A1387G02 | GAGE, THICKNISS-VANE SECTOR, COMPR STATOR | 2 | |
| 856A1391 | SET, HOLDER - VARIABLE STATOR VANES | 1 | |
| 856A1391 G01 | Holder ‐ Variable Stator Vane (VSV holder) | 2 | |
| 856A1391G01 | HOLDER-VARIABLE STATOR VAN | 2 | |
| 856A1391G02 | HOLDER - VARIABLE STATOR VANE (VSV HOLDER SET) | 7 | |
| 856A1393G01 | RETAINER, SHROUD HANGER - HPT STATOR | 9 | |
| 856A1418 | RETAINER, SHROUD HANGER - HPT STATOR | 1 | |
| 856A1418G02 | RETAINER, SHROUD HANGER - HPT STATOR | 2 | |
| 856A1418G03 | RETAINER, SHROUD HANGER - HPT STATOR (SHROUD HANGER RETAINER) | 4 | |
| 856A1421 | FIXTURE, LIFT-HP COMPR. STATOR CASE, FRONT ASSY | 1 | |
| 856A1421 G01 | Fixture Lift ‐ HP Compressor Case Front Stator | 11 | |
| 856A1421 REV B | FIXTURE, LIFT-HP COMPR. STATOR CASE, FRONT ASSY | 1 | |
| 856A1421G01 | FIXTURE, LIFT - HP COMP STATOR CASE FRONT ASSY | 11 | |
| 856A1421G01 | FIXTURE, LIFT HPC STATOR FWD CASE | 11 | |
| 856A1421G02 | FIXTURE, LIFT - HP COMPRESSOR STATOR CASE FRONt | 9 | |
| 856A1421G02 | FIXTURE LIFT HP COMPR STATOR CASE | 9 | |
| 856A1432 | PROTRACTOR, ELECTRONIC PORTABLE - VARIABLE STATOR VANE (VSV ELECTRONIC PROTRACTOR) | 1 | |
| 856A1432G00 | PROTRACTOR, ELECTRONIC PORTABLE - VARIABLE STATOR VANE (VSV ELECTRONIC PROTRACTOR) | 1 | |
| 856A1432G03 | Protractor, Electronic Portable - Variable Stator Vane (VSV electronic protractor) | 2 | |
| 856A1433 | TOOL, TORQUING - MANIFOLD BUSHING - HP TURB STATOR | 1 | |
| 856A1433G01 | TOOL, TORQUING- HPT STATOR MANIFOLD BUSHING | 1 | |
| 856A1433G02 | TOOL, TORQUE - MANIFOLD BUSHING, HP TURBINE STATOR (TORQUE TOD) | 7 | |
| 856A1433G02 | TOOL, TORQUING- HPT STATOR MANIFOLD BUSHING | 7 | |
| 856A1475 | FIXTURE, DUMMY HP TURB. STATOR FWD | 1 | |
| 856A1475 REV F | FIXTURE, DUMMY HP TURB. STATOR FWD | 1 | |
| 856A1475G01 | Dummy HP Stator | 1 | |
| 856A1475G02 | Dummy HP Stator | 1 | |
| 856A1475G03 | Fixt Dummy HPT Stator | 3 | |
| 856A1481 | PROTRACTOR, ELECT PORT 4 CHANNEL VAR STATOR VANE | 1 | |
| 856A1481 G02 | PORTABLE ELECTRONIC PROTRACTOR - VARIABLE STATOR V | 7 | |
| 856A1481 REV C | PROTRACTOR, ELECT. PORT. 4 CHANNEL VAR. STATOR VANE | 1 | |
| 856A1481G00 | PROTRACTOR, ELECTRONIC PORTABLE - VARIABLE STATOR VANE (VSV ELECTRONIC PROTRACTOR) USE ALTERNATE 856A1432 | 1 | |
| 856A1481G01 | PROTRACTOR ELECTRONIC PORTABLE VARIABLE STATOR VAN | 2 | |
| 856A1481G02 | PROTRACTOR, ELECTRONIC PORTABLE – VARIABLE STATOR | 7 | |
| 856A1481G03 | PROTRACTOR ELECTRONIC PORTABLE VARIABLE STATOR VAN | 1 | |
| 856A1609 | ADAPTERS, MAIN.T STAND FWD FAN STATOR SUPPORT | 1 | |
| 856A1609 REV B | ADAPTERS, MAIN.T STAND FWD FAN STATOR SUPPORT | 1 | |
| 856A1609G01 | ADAPTER, MAINTENANCE STAND - FORWARD,FAN STATORS SUPPORT RING | 1 | |
| 856A1802G03 | FIXTURE, DUMMY - HIGH PRESSURE TURBINE STATOR FORWARD (DUMMY FIXTURE) | 1 | |
| 856A1802G04 | FIXTURE, DUMMY - HP TURB STATOR | 4 | |
| 856A1816G01 | COMPRESSOR FRONT STATOR ASSEMBLY UPPER FRONT COMPRESSOR CASE REMOVAL | 9 | |
| 856A1835G01 | FIXTURE, DUMMY - HP TURB STATOR FWD (MODIFICATION) | 1 | |
| 856A1836 | ADAPTERS, MAINTENANCE STAND FWD FAN STATOR SUPPORT RING | 1 | |
| 856A1836G01 | ADAPTERS, MAINTENANCE STAND FWD FAN STATOR SUPPORT RING | 10 | |
| 856A1867G01 | HP DUMMY-HP COMP STATOR | 1 | |
| 856A1885 | TOOL SET,REMOVAL-COMPR STATOR LINERS&VANE SEGMENTS | 1 | |
| 856A1885G01 | REMOVAL TOOL, VANE SECTOR - COMPRESSOR STATOR | 2 | |
| 856A2001G03 | FIXTURE, INDICATOR - VARIABLE STATOR VANE (VSV INDICATOR FIXTURE) | 3 | |
| 856A2001G04 | FIXTURE, INDICATOR - VARIABLE STATOR VANE (VSV INDICATOR FIXTURE) | 2 | |
| 856A2309 | FIXTURE HANDLING - BOOSTER ROTOR / STATOR ASSY | 1 | |
| 856A2309G02 | FIXTURE, HANDLING - BOOSTER ROTOR/STATOR ASSY (HANDLING FIXTURE) | 2 | |
| 856A2309G03 | FIXTURE, HANDLING - BOOSTER ROTOR/STATOR ASSY (HANDLING FIXTURE) (G02) | 2 | |
| 856A2357 | FIXTURE, RESTRAINING - LPT ROTOR TO STATOR | 1 | |
| 856A2357G01 | FIXTURE RESTRAINING LPT. ROTOR TO STATOR | 1 | |
| 856A2360 | FIXTURE, HOIST/HANDLING LPT ROTOR/ STATOR ASSY | 1 | |
| 856A2360G01 | FIXTURE, HOIST/HANDLING - LPT ROTOR/STATOR ASSEMBLY,(HANDLING FIXTURE)OBSELETE REPLACED BY 856A2359G02_C | 1 | |
| 856A2360G02 | HANDLING/HOISTLING FIXTURE - LPT ROTOR/STATOR | 3 | |
| 856A2383G02 | FIXTURE, ASSEMBLY/DISASSEMBLY - LPT ROTOR AND STATOR (ASSEMBLY/DISASSEMBLY FIXTURE)OBSELETE REPLACED BY 856A2383G03_F | 1 | |
| 856A2383G03 | FIXTURE ASSEM./DISASSEM-LPT.ROTOR & STATOR | 2 | |
| 856A2425 | FIXTURE, RESTRAINING - LPT ROTOR TO STATOR | 1 | |
| 856A2425 G01 | Restraining Fixture - LPT Rotor to Stator | 2 | |
| 856A2425G01 | FIXTURE, RESTRAINING - LTP ROTOR TO STATOR (RESTRAINING FIXTURE) | 2 | |
| 856A2425G02 | FIXTURE, RESTRAINING - LPT ROTOR TO STATOR (RESTRAINING FIXTURE) | 2 | |
| 856A2425G03 | FIXTURE, RESTRAINING - LTP ROTOR TO STATOR | 1 | |
| 856A2426G01 | FIXTURE TURNNION ROTOR/STATOR LPT | 1 | |
| 856A2529 | FIXT HANDLE ST BOOSTER STATOR | 1 | |
| 856A2618 | FIXTURE- HOLDING/ROTOR/STATOR | 1 | |
| 856A2618 REV C | FIXTURE- HOLDING/ROTOR/STATOR | 1 | |
| 856A2618G01 | FIXTURE, HOLDING ROTOR/STATOR | 5 | |
| 856A2618G02 | FIXTURE, HOLDING ROTOR/STATOR | 2 | |
| 856A2618G03 | Fixture, Holding-Rotor/Stator | 3 | |
| 856A2618G04 | FIXTURE, HOLDING ROTOR/STATOR | 11 | |
| 856A2660G11 | HOLDING FIXTURE - ROTOR/STATOR, LPT | 5 | |
| 856A2703 | PIN,GUIDE-FAN STATOR STAGE 1/4 | 1 | |
| 856A2703G01 | GUIDE PIN FAN STATOR STAGE ¼ | 4 | |
| 856A2705G01 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 1 | |
| 856A2705G02 | FIXTURE, HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY. | 3 | |
| 856A2705G03 | FIXTURE, HANDLING-BOOSTER ROTOR/STATOR ASSEMBLY | 4 | |
| 856A2714G01 | FIXTURE, HOIST/HANDLING - LPT ROTOR/STATOR ASSY | 5 | |
| 856A2714G03 | FIXTURE, HOIST/HANDLING - LPT ROTOR/STATOR ASSY | 8 | |
| 856A2730 | FIXT LPTR STATOR | 1 | |
| 856A2730G02 | FIXT LPTR STATOR | 1 | |
| 856A2730G03 | Fixture LPTR Stator | 4 | |
| 856A2903G01 | FIXTURE, HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY (HANDLING FIXTURE) | 11 | |
| 856A2904 | FIXTURE, HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 1 | |
| 856A2904G01 | FIXTURE, HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 3 | |
| 856A2904G02 | FIXTURE, HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 7 | |
| 856A2953 | GUIDE PINS STATOR ALTERNATOR | 2 | |
| 856A2953G01 | GUIDE PINS STATOR ALTERNATOR | 7 | |
| 856A2958 | VARIABLE STATOR VANE ACTUATION HOSE ASSEMBLY | 1 | |
| 856A2977 | Fixture, Assembly/Disassembly - LPT Rotor/Stator (fixture) | 1 | |
| 856A2977G01 | FIXTURE A/D LPT ROTOR/STATOR | 3 | |
| 856A2977G02 | ASSY/DISASSY FIXTURE - LPT ROTOR/STATOR | 2 | |
| 856A2978 | FIXTURE, HANDLING - LPT ROTOR/STATOR | 1 | |
| 856A2978G01 | Handling Fixture - LPT Stator/Rotor (handling fixture) | 7 | |
| 856A3052 | FIXT HOLD BOOSTER ROTOR/STATOR | 1 | |
| 856A3241G01 | PINS, GUIDE NO 2,3,4 STATORS OUTER SHROUD BOOSTER | 2 | |
| 856A3320 | Fixture Assy/ Disassy LPT Rotor Stator | 1 | |
| 856A3320 G03 | Fixture LPT Rotor / Stator | 1 | |
| 856A3320G01 | FIXTURE, LPT ROTOR/STATOR | 1 | |
| 856A3320G03 | FIXTURE LPT ROTOR/STATOR | 1 | |
| 856A3320G04 | LPT ROTOR/STATOR FIXTURE | 1 | |
| 856A3320G05 | FIXTURE ASSEMBLY/DISASSEMBLY LPT ROTOR STATOR | 6 | |
| 856A3449G01 | SHAFT, BALANCE - LPTROTOR/STATOR | 1 | |
| 856A3450G02 | FIXTURE, BALANCE - LPT ROTOR/STATOR ASSY | 3 | |
| 856A3503 | FIXTURE REM / INSTAL. AND HANDLING - BOOSTER ROTOR / STATOR ASSY | 1 | |
| 856A3503G01 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 3 | |
| 856A3503G02 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSY | 5 | |
| 856A3535 G02 | Fixture Lift ‐ Booster Rotor‐Stator Assembly | 3 | |
| 856A3535G02 | FIXTURE LIFT BOOSTER ROTOR STATOR ASSEMBLY | 3 | |
| 856A3732 | FIXTURE, HANDLING - BOOSTER ROTOR / STATOR ASSY | 1 | |
| 856A3732G01 | Fixture Handling Booster Rotor/Stator Assembly | 1 | |
| 856A3732G02 | FIXTURE, HANDLING-BOOSTER ROTOR/STATOR ASSY | 4 | |
| 856A3732G03 | FIXTURE, HANDLING-BOOSTER ROTOR/STATOR ASSY | 6 | |
| 856A3732G03 | FIXTURE HANDLING - BOOSTER ROTOR and STATOR ASSY | 6 | |
| 856A3732G04 | Fixture, Handling - Booster Rotor/Stator Assy (handling fixture) | 8 | |
| 856A3733 | MOBILE BASEPLATE - ROTOR/STATOR BOOSTER | 1 | |
| 856A3733G01 | BASE PLATE, MOBILE – BOOSTER ROTOR/STATOR ASSY | 1 | |
| 856A3733G02 | MOBILE BASEPLATE - ROTOR/STATOR | 5 | |
| 856A3761G01 | Installation - LPT Outer Stator Seal Stage 2 (tool set) | 6 | |
| 856A3762 | Fixture Assy/ Disaasy LPT Rotor/ Stator | 1 | |
| 856A3762G01 | Fixture, A/D LPT Rotor/Stator | 1 | |
| 856A3762G02 | Fixt.A/D LPT Rotor Stator | 1 | |
| 856A3762G03 | Fixture, Assembly/Disassembly - LPT Rotor/Stator (fixture) | 9 | |
| 856A3764G01 | Installation - LPT Outer Stator Air Seal Stage 3 (tool set) | 8 | |
| 856A3766 | SUPPORT LPT STATOR/ROTOR | 1 | |
| 856A3766G01 | HANDLING SUPPORT - LPT STATOR/ROTOR (HANDLING SUPPORT) | 1 | |
| 856A3766G02 | Support LPT Stator/Rotor Handling Fixture | 1 | |
| 856A3766G03 | Support LPT Stator/Rotor | 5 | |
| 856A3767 | FIXT HANDLING LPT ROTOR/STATOR | 1 | |
| 856A3767G01 | Fixture Handling LPT Rotor/Stator | 1 | |
| 856A3767G02 | Fixture, Handling - LPT Rotor/Stator | 4 | |
| 856A3767G03 | Handling Fixture - LPT Stator/Rotor (handling fixture) | 1 | |
| 856A4050 G01 | Template set Radius HP Compr. Stator Liners | 1 | |
| 856A4050G01 | TEMPLATE SET RADIUS HP COMPR. STATOR LINERS | 1 | |
| 856A4051 G02 | Fixture, Functional check HP Comp. Stator Liners | 1 | |
| 856A4142G01 | FIXTURE, GRINDING- INNER TRUNNION, IGV, STAGE 1-3 STATOR VANE | 1 | |
| 856A4325G01 | TOOL, GRINDING-CPRSR STATOR CASE | 1 | |
| 856AI006 | ADAPTER TORQUE-COMPR. STATOR NUTS | 1 | |
| 856AI056 | FIXTURE,GRIND - COMPR STATOR FLOWPATH | 1 | |
| 856AI05I | PULLER, ARM - COMPRESSOR STATOR ACTUATION | 1 | |
| 856AI063 | TOOL - SET COMPR STATOR SECTORS & LINERS INSTALLATION | 1 | |
| 856AI07I | TOOL SET,REMOVAL - COMPR STATOR LINERS & VANE SEGMENTS | 1 | |
| 856AI084G02 | ACTUATOR STATOR PORT -2/-3 ENG | 1 | |
| 856AI0II | PROTRACTOR-MACHINING VARIABLE STATOR VANE | 1 | |
| 856AI0IIG05 | PROTRACTOR-MECH VAR STATOR VANE;SEE MI | 1 | |
| 856AI0IIGI3 | PROTRACTOR-MECHANICAL VARIABLE STATOR VANE | 1 | |
| 856А2618 | FIXTURE, HOLDING - ROTOR/STATOR, LPT | 1 | |
| 856А2618G04 | FIXTURE, HOLDING - ROTOR/STATOR, LPT | 1 | |
| 857E853 | SNUBBERS, MK3 COMP. STATOR | 1 | |
| 857E853 REV J | SNUBBERS, MK3 COMP. STATOR | 1 | |
| 857E853G01 | SNUBBERS, MK3 COMP STATOR | 1 | |
| 857E853G02 | SNUBBERS, MK3 COMP STATOR | 1 | |
| 857E853G03 | SNUBBERS, MK3 COMP STATOR | 1 | |
| 857E853G04 | SNUBBERS, MK3 COMP STATOR | 1 | |
| 857E853G05 | SNUBBERS, MK3 COMP STATOR | 1 | |
| 857E853G06 | SNUBBERS, MK3 COMP STATOR | 1 | |
| 857E853G07 | SNUBBERS, MK3 COMP STATOR | 1 | |
| 857E853G08 | SNUBBERS, MK3 COMP STATOR | 1 | |
| 857E853G09 | SNUBBERS, MK3 COMP STATOR | 1 | |
| 857E853G10 | SNUBBERS, MK3 COMP STATOR | 1 | |
| 857E853G11 | SNUBBERS, MK3 COMP STATOR | 1 | |
| 857E853G12 | SNUBBERS, MK3 COMP STATOR | 1 | |
| 857E853G13 | SNUBBERS, MK3 COMP STATOR | 1 | |
| 857E853G14 | SNUBBERS, MK3 COMP STATOR | 1 | |
| 857E853G15 | SNUBBERS, MK3 COMP STATOR | 1 | |
| 859R1003 | GAGE, INSPECTION - SHROUD HANGER HP TURBINE STATOR (INSPECTION GAGE) | 1 | |
| 87006-9 | STATOR –GEN AC | 1 | |
| 8C2151 | FIXTURE, BUILD-UP - COMPRESSOR FWD STATORS | 1 | |
| 8C2160 | ADAPTER SET, INSTALL/REMOVE - FORWARD HPC STATOR CASES | 1 | |
| 8C2162 | FIXTURE, INSTALL – STATOR WEAR GUIDES | 1 | |
| 8C2188 | FIXTURE, LIFT - COMPRESSOR STATOR RINGS | 1 | |
| 8C2189 | FIXTURE, SUPPORT - AFT COMPRESSOR INNER STATOR ASSEMBLY | 1 | |
| 8C2318 | PIN SET, GUIDE – FAN STATOR MODULE/FAN HUB MODULE | 1 | |
| 8C2603 | COVER, PROTECTIVE – FAN STATOR | 1 | |
| 8C2670 | STAND - SHIPPING - FAN STATOR | 1 | |
| 8C2724 | FIXTURE, INSTALL - STG 1 AND 2 HANGER/SUPPORT STATOR CASE | 1 | |
| 8C2769 | FIXTURE - INDIVIDUAL INSTALL - STG 1 AND 2 HANGER / SUPPORT STATOR CASE | 1 | |
| 907876-1-1 | BUSHING AND STATOR PRESSING FIXTURE | 1 | |
| 9385M26G10 | CASE FAN STATOR ASSY STG 5 | 1 | |
| 9429M24 | PROTRACTOR - ELECTRONIC PORTABLE-VARIABLE STATOR VANE | 1 | |
| 9429M24G03 | PROTRACTOR, ELECTRONIC PORTABLE - VARIABLE STATOR VANE | 1 | |
| 9446M61G02 | FIXTURE, LIFT - COMPRESSOR STATOR CASE, UPPER, SET | 1 | |
| 9461M39P02 | CART-STATOR ACTUATOR | 2 | |
| 9465M11P01 | CART - SERVICING, STATOR ACTUATOR | 2 | |
| 946F769-1 | STATOR,GENERATOR | 1 | |
| 9471M28G01 | VARIABLE STATOR VANE (VSV)ELECTRONIC PORTABLE PROTRACTOR | 1 | |
| 956A1150 | FIXTURE - SUPPORT - HPC AFT STATOR ASSEMBLY | 1 | |
| 956A1151 | SET - ALIGNMENT SEGMENTS - HP COMPRESSOR STATOR RINGS | 1 | |
| 956A1153 | FIXTURE - SHIM HP COMPRESSOR STATOR AFT CASE | 1 | |
| 956A1161 | FIXTURE - ALIGHTMENT HPC STATOR SPLIT CASE | 1 | |
| 956A1161P01 | FIXTURE - ALIGNMENT HPC STATOR SPLIT CASE | 1 | |
| 956A1172 | FIXTURE - LIFT - HP COMPR STATOR CASE | 1 | |
| 956A1173G01 | VARIABLE STATOR VANE (VSV) RIGGING ADAPTER | 1 | |
| 956A1176G01 | ELECTRONIC PROTRACTOR VARIABLE STATOR VANE (VSV) ADAPTER TOOL KIT | 1 | |
| 956A1177 | FIXTURE - INSTALL HPC AFT STATOR WEAR GUIDE | 1 | |
| 956A1188 | SET - HOLDER - VARIABLE STATOR VANES | 1 | |
| 956A1192 | FIXTURE - ALIGNMENT - HPC STATOR SPLIT CASE | 1 | |
| 956A1215 | FIXTURE - INSTALL - STG 1 HANGER/SUPPORT STATOR CASE | 1 | |
| 956A1264 | TOOL SET - REMOVE-COMPRESSOR STATOR SHROUD PINS | 1 | |
| 956A1277 | FIXTURE - INSTALL - STG 1 HANGER - SUPPORT STATOR CASE | 1 | |
| 956A1282 | FIXTURE - INSTALL/REMOVE- SHANK NUT - CDP STATOR SEAL | 1 | |
| 956A3150 | FIXTURE - SUPPORT - HPC AFT STATOR ASSEMBLY | 1 | |
| 956A3151 | SET - ALIGNMENT PINS - HPC STATOR RINGS | 1 | |
| 956A3157 | SET - HOLDER - VARIABLE STATOR VANES | 1 | |
| 956A3159 | TOOL SET - COUNTERTORQUE - STATOR VANES STG 1-4 | 1 | |
| 956A3173G02 | VARIABLE STATOR VANE HIGH PRESSURE COMPRESSOR (HPC) TURNBUCKLE GAUGING FIXTURE | 1 | |
| 956A3215 | FIXTUREM INSTALL - STG 1 HANGER/SUPPORT HPT STATOR CASE | 1 | |
| 956A3240 | ADAPTER SET - COMPRESSOR STATOR - DUMMY | 1 | |
| 956A3277 | FIXTURE - INSTALL - STG 1 HANGER - SUPPORT STATOR CASE | 1 | |
| 956A3506G01 | GUIDE PINS STATOR ALTERNATOR | 7 | |
| 956A6075G01 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE, LEAP-1 | 1 | |
| 956A6326 | DOLLY - STORAGE - LPT ROTOR STATOR | 1 | |
| 956A6327 | FIXTURE - DOUBLE RESTRAINER - ROTOR/STATOR LPT | 1 | |
| 956A6341 | FIXTURE - RESTRAINER - LPT ROTOR STATOR ASSY | 1 | |
| 956A6343 | FIXTURE - BALANCING - LPT ROTOR STATOR ASSY | 1 | |
| 956A6361 | FIXTURE - SIMPLE RESTRAINER - ROTOR/STATOR - LPT | 1 | |
| 956A6427 | PROTECTOR - REAR LPT ROTOR STATOR | 1 | |
| 956A7405 | STAND - ASSY/DISASSY - LPT - ROTOR/STATOR | 1 | |
| 956A8311 | FIXTURE - BALANCING ADJUST - LPT STATOR ASSY | 1 | |
| 956A8485 | DOLLY - STORAGE - LPT ROTOR/STATOR ASSY | 1 | |
| 956A8544 | CONTAINER - LPT ROTOR/STATOR ASSY | 1 | |
| 9C1277 | PIN SET - GUIDE-FAN STATOR MODUL | 1 | |
| 9C1277G01 | PIN KIT FAN STATOR | 2 | |
| 9C1582 | DUMMY STATOR | 1 | |
| 9C1700G02 | WRENCH - ADAPTER SPECIAL TOOL FOR VARIBLE STATOR VINE VALVE (VSV) ACTUATOR COMPONENTS REPLACEMENT AND IGV, VSV INSPECTION | 3 | |
| 9C2295 | DUMMY STATOR | 1 | |
| 9C2295G02 | Dummy Stator | 1 | |
| 9C2295G05 | DUMMY STATOR | 1 | |
| 9C2373 | FIXTURE, LIFT HPC STATOR CASE | 1 | |
| 9C2416G01 | WORK TABLE - REAR STATORS | 1 | |
| 9C3013G01 | PROTECTOR, FORWARD ACCOUSTIC LINER - FAN MODULE (PROTECTOR)_FAN STATOR MODULE ACOUSTIC LINER NON-SLIP._[9C3013G01] | 6 | |
| 9C3144 | FIXTURE, INSTALLATION ASSEMBLY FAN STATOR | 1 | |
| 9C3144G01 | FIXTURE INSTALLATION ASSEMBLE FAN STATOR | 1 | |
| 9C3159 | FIXTURE, LIFT/TURN FAN STATOR ASSY, AFT | 1 | |
| 9C3159G01 | FIXTURE LIFT AND TURN FAN STATOR ASY AFT | 1 | |
| 9C3181 | FIXTURE, RESTRAINING LPT ROTAR/STATOR | 1 | |
| 9C3408 | FIXTURE, LIFT/TURN FAN STATOR ASSY, AFT | 1 | |
| 9C3408G01 | FIXTURE, LIFT AND TURN - FAN STATOR ASSY, AFT | 1 | |
| 9C6002G02 | DOLLY, SEPARATION FAN STATOR CASE IF STAND 9C6025P02 USED | 1 | |
| 9C6003 | FIXTURE - SHIPPING FAN STATOR CASE MODULE | 1 | |
| 9C6003P01 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE | 1 | |
| 9C6003P01-PPK | FAN STATOR SHIP FIXTURE, GE90 | 1 | |
| 9C6015 | FIXTURE SHIPPING FAN STATOR CASE MODULE | 1 | |
| 9C6015P01 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE | 1 | |
| 9C6015P08 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE | 1 | |
| 9C6015P09 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE | 1 | |
| 9C6017G01 | CARRIAGE, TRANSFER-FAN STATOR CASE | 1 | |
| 9C6017G02 | STAND - TRANSFER, FAN STATOR CASE, GE90-70/80/90 | 1 | |
| 9C6017G03 | CARRIAGE, TRANSFER-FAN STATOR CASE | 1 | |
| 9C6017G05 | CARRIAGE, TRANSFER-FAN STATOR CASE | 1 | |
| 9C6023 | FIXTURE - SHIPPING - FAN STATOR CASE MODULE (2 OVERHEAD HOISTS REQUIRED) | 1 | |
| 9C6030 | STAND - TRANSFER, FAN STATOR CASE, GE90-70/80/90 AND -100 SERIES ENGINES | 1 | |
| 9C6030P01 | STAND - TRANSFER, FAN STATOR CASE, GE90-70/80/90 AND -100 SERIES ENGINES | 2 | |
| 9С6017G02 | CARRIAGE, TRANSFER - FAN STATOR CASE IF STAND 9C6025P02 USED | 1 | |
| A0125451 | Gauge, Tenon Wear, Stator, Brake Unit | 1 | |
| AB73001-V1N | GUIDE PINS STATOR ALTERNATOR | 1 | |
| AETL34168 | STATOR BRG REMOVAL TOOL | 1 | |
| AGE-10955 | ASSEMBLY TOOL, GEN STATOR | 4 | |
| AGE-11991 | PMG STATOR INSTALLER | 2 | |
| AGE-70068 | STATOR JACKING TOOL SET | 12 | |
| AGE10142 | PUSHER STATOR | 1 | |
| AGE10159 | STATOR END COVER PULLER ASSEMBLY | 1 | |
| AGE10601 | STATOR HOUSING FLUSH KIT | 2 | |
| AGE10952 | EXCITER STATOR GUIDE | 1 | |
| AGE10955 | ASSY TL STATOR | 4 | |
| AGE11030 | STATOR HOUSING PORT PLUG | 1 | |
| AGE11340 | INSTALLATION TOOL, GEN STATOR | 1 | |
| AGE11583 | Generator Stator Installation Tool | 2 | |
| AGE11893 | INSTALLER ASSY, STATOR | 2 | |
| AGE11991 | PMG STATOR INSTALLER | 2 | |
| AGE12839 | STATOR GUIDE EX | 2 | |
| AGE12994 | EXCITER STATOR GUIDE | 1 | |
| AGE12997 | INSTALLER, STATOR | 2 | |
| AGE13058 | STATOR INSTALLER | 1 | |
| AGE13106 | STATOR INSTALLER | 1 | |
| AGE13569 | INSTALLATION ASSEMBLY, STATOR | 1 | |
| AGE14119 | STATOR PULLER | 1 | |
| AGE14823 | FIXTURE, STATOR | 1 | |
| AGE70068 | TOOLS, JACKING, RMV/INSTL - STATOR | 12 | |
| AGSE-C037 | LPT STATOR, ROTOR AND SHAFT CONTAINER (MAJOR MOD 3) | 1 | |
| AID-01038 | PMG STATOR PULLER | 1 | |
| AST078417 | STATOR INSERTION TOOL | 1 | |
| C6019G01 | DRIVER SET COMP STATOR VANE | 1 | |
| CPWA-30454 | Drift – 3 Brg Stator Air Seal | 1 | |
| CPWA-30493 | Puller – Compressor Turbine Stator Air Seal | 1 | |
| CTGR8850-26 | STATOR FRAME | 1 | |
| CTRS4850-26 | STATOR FRAME | 1 | |
| D15141 | STATOR INSERTION TOOL | 1 | |
| Ex-74973 | Fixture, checking, comp Stator vane angle | 1 | |
| G4000VSVA01 | ACTUATOR VARIABLE STATOR | 1 | |
| GS21757-1 | CLOSURE KIT, ACTUATOR, STATOR | 1 | |
| GSE7201199 | VARIABLE STATOR VANE ACTUATOR TRAVERSE TOOL | 1 | |
| H140AMV204M | STATOR-STAKING SET | 1 | |
| H140AMV204M1 | STATOR STAKING SET | 1 | |
| H140AMV204M2 | STATOR STAKING SET | 1 | |
| H140AMV205M | STATOR PULLER | 1 | |
| HU1747513 | STATOR IMMOBILIZER | 1 | |
| HU40237 | PIN-ALIGNMENT STATOR VANES | 3 | |
| HU40237-1 | PIN-ALIGNMENT STATOR VANES | 1 | |
| IAE1M14009 | STAND STORAGE LPT ROTOR AND STATOR | 1 | |
| IAE1M14010 | FIXTURE ASSY DISSASY LPT ROTOR AND STATOR | 3 | |
| IAE1M14014 | FIXTURE SUPPORT LPT ROTOR AND STATOR | 2 | |
| IAE1M14110 | STAND TURN OVER LPT ROTOR AND STATOR | 1 | |
| IAE1P16028 | STAND BUILD HPT ROTOR AND STATOR ASSY | 3 | |
| IAE1P16614 | RIG PIN VAR STATOR VANE ACTUATOR V2500 | 6 | |
| IAE1R18209 | FIXTURE, GRINDING - HP COMPRESSOR, STAGE 6 VARIABLE STATOR VANES | 1 | |
| IAE2J12618 | FIXTURE - LPC STG 1.5 STATOR | 1 | |
| IAE2J12620 | FIXTURE - LPC STG 2.3 STATOR | 1 | |
| J34002-22 | Stator Assy | 1 | |
| J34002-23 | Stator Assy | 1 | |
| JRC105-2 | WRENCH,STATOR | 1 | |
| L-545 | FIXTURE SUPPORT HPC SPLIT STATOR CASE AND AIRSEAL SET BUILD AND TURN | 1 | |
| L-545149 | FIXTURE SUPPORT HPC SPLIT STATOR CASE AND AIRSEAL SET BUILD AND TURN | 1 | |
| L38602G01 | FIG 55 -35, NOZZLE, LPT STATOR- STG 2 MACHINING | 1 | |
| L38602G02 | FIG 55 - 36, NOZZLE, LPT STATOR- STG 2 MACHINING | 1 | |
| L38602G03 | FIG 55 - 37, NOZZLE, LPT STATOR- STG 2 MACHINING | 1 | |
| L38603G01 | FIG 55 - 58, NOZZLE, LPT STATOR-STG 3 MACHINING OMITTED AT 3 AND 9 O'CLOCK POSITIONS | 1 | |
| L38603G02 | FIG 55 - 59, NOZZLE, LPT STATOR-STG 3 MACHINING AT SPLITLINE - 3 AND 9 O'CLOCK POSITIONS | 1 | |
| L38603G03 | FIG 55 - 60, NOZZLE, LPT STATOR-STG 3 MACHINING AT SPLITLINE - 3 AND 9 O'CLOCK POSITIONS | 1 | |
| L61106G03 | FIG 55 - 67, SHROUD, LPT STATOR STAGES 1-3 | 1 | |
| LAG-3301 | PRESSURE PLATE AND STATOR PLATE | 1 | |
| LTCT7612-01 | Kit, Masking, Compressor First Stage Stator, RTV | 1 | |
| M2006 | STATOR MOTOR | 2 | |
| PF55688-1 | UNIT - SERVICING, STATOR ACTUATOR; B734F; ATA 72-00-00 | 1 | |
| PWA 112306. | TOOL TO DRAIN FUEL FROM THE ACTUADOR ALABES STATORES VARIABLES | 1 | |
| PWA 17828 | ADAPTER 2RD STAGE TURBINE STATOR | 1 | |
| PWA 17829 | ADAPTER 3RD STAGE TURBINE STATOR | 1 | |
| PWA 17830 | ADAPTER 4RD STAGE TURBINE STATOR | 1 | |
| PWA 27583-308 | RETAINER - LPC WZ 1st STAGE STATOR | 1 | |
| PWA 30084 | SLING TURBINE STATOR | 1 | |
| PWA 86317D | STATOR VANE RIGGING BOX | 1 | |
| PWA102865 | PIN RIGGING VARIABLE STATOR VANE ACTUATOR | 1 | |
| PWA106027 | PIN, ALIGNING - LPC STATORS | 1 | |
| PWA24351 | ADAPTER RUNOUT CHECKING ROTARY STATOR ASSY | 1 | |
| PWA25085 | SUPPORT - REAR COMP, R & STATOR, FRT_[PWA25085] | 1 | |
| PWA25404 | LIFTING ARM - LPC R/STATOR BAL ARBOR_[PWA25404] | 1 | |
| PWA25637 | PINS RIGGING - REAR COMPRESSOR VARIABLE STATORS | 5 | |
| PWA25796 | DRIFT - HPC CASE & STATOR 5-7TH STG_[PWA25796] | 1 | |
| PWA25939 | GAGE - COMP STATOR 8,9TH VANE ANGLE_[PWA25939] | 1 | |
| PWA25940 | GAGE - STATOR, HPC 9TH VANE ANGLE CHKG_[PWA25940] | 1 | |
| PWA25941 | GAGE - STATOR HPC 11TH VANE ANGLE CHK_[PWA25941] | 1 | |
| PWA25942 | GAGE - COMP STATOR 11TH STG VANE L/E_[PWA25942] | 1 | |
| PWA25943 | GAGE - STATOR, HPC 12,13 &14TH VANE ANGL_[PWA25943] | 1 | |
| PWA25944 | GAGE, STATOR - HPC 12,13 & 14TH VANE ANG_[PWA25944] | 1 | |
| PWA26006 | DRIFT - COMP STATOR LEVER & BRG_[PWA26006] | 2 | |
| PWA26007 | BASE ASSY - COMP STATOR LEVER_[PWA26007] | 1 | |
| PWA26176 | PINS CHECKING REAR COMPRESSOR VARIABLE STATORS | 1 | |
| PWA26246 | ADAPTER,LOCATING - HPC CASE & STATORS_[PWA26246] | 1 | |
| PWA27048 | SUPPORT RING - 11TH STG STATOR_[PWA27048] | 2 | |
| PWA27518 | FIXTURE - TURB ROTOR & STATOR R/COMP DR_[PWA27518] | 1 | |
| PWA27583 | RETAINER - LPC WZ 1ST STAGE STATOR_[PWA27583] | 2 | |
| PWA27645 | SUPPORT - 10TH STAGE STATOR_[PWA27645] | 2 | |
| PWA27659 | SPACER - LPC, DUMMY STATOR, FRONT_[PWA27659] | 2 | |
| PWA27660 | RETAINER - HPC R & STATOR,FRONT_[PWA27660] | 1 | |
| PWA27676 | FIXTURE - REAR COMP ROTOR & STATOR_[PWA27676] | 2 | |
| PWA27687 | RING,LOCATING - 7TH STATOR BUILD STD_[PWA27687] | 2 | |
| PWA27700 | FIXTURE, BAL - REAR COMP R & STATOR_[PWA27700] | 2 | |
| PWA27701 | SPACER - REAR COMP ROTOR & STATOR_[PWA27701] | 2 | |
| PWA27702 | RETAINER, AXIAL - R/COMP ROTOR & STATOR_[PWA27702] | 2 | |
| PWA27705 | FIXTURE,BALANCE - HPC ROTOR & STATOR_[PWA27705] | 1 | |
| PWA27717C | PULLER - REAR COMP R & STATOR BAL BRG_[PWA27717C] | 1 | |
| PWA27738 | SPACER - RING, HPC DR TURB R & STATOR_[PWA27738] | 2 | |
| PWA27769C | STAND - FRT COMP ROTOR & STATOR_[PWA27769C] | 1 | |
| PWA27792 | SLING, HANDLING - 1,2,3 STG LPC STATOR_[PWA27792] | 1 | |
| PWA27836 | FIXTURE, LOADING - 3~6TH TURB STATOR SHD_[PWA27836] | 2 | |
| PWA27856 | STAND,BUILD - HPT ROTOR & STATOR_[PWA27856] | 1 | |
| PWA28240 | RETAINER - REAR COMP ROTOR AND STATOR_[PWA28240] | 2 | |
| PWA29160 | BAR, BENDING - COMP STATOR 9TH VANE L/E_[PWA29160] | 1 | |
| PWA29161 | BAR,BENDING - COMP STATOR 10TH VANE L/E_[PWA29161] | 1 | |
| PWA29295 | BAR, BENDING - COMP STATOR 9TH STG VANE_[PWA29295] | 1 | |
| PWA29296 | BAR,BENDING - COMP STATOR 10TH VANE T.E_[PWA29296] | 1 | |
| PWA29297 | BAR,BENDING - COMP STATOR 11TH VANE T.E_[PWA29297] | 1 | |
| PWA29298 | BAR,BENDING - COMP STATOR 12TH VANE T.E_[PWA29298] | 1 | |
| PWA29299 | BAR,BENDING - COMP STATOR 13TH VANE T.E_[PWA29299] | 1 | |
| PWA29300 | BAR,BENDING - COMP STATOR 14TH VANE T.E_[PWA29300] | 1 | |
| PWA29919A | FIXTURE-LPT ROTOR & STATOR_[PWA29919A] | 1 | |
| PWA29920 | FIXTURE-LPT ROTOR & STATOR_[PWA29920] | 1 | |
| PWA45311 | FIXTURE, RETAINING - REAR COMPR. ROTOR & STATOR REAR | 1 | |
| PWA45311 REV A | FIXTURE, RETAINING - REAR COMPR. ROTOR & STATOR REAR | 1 | |
| PWA78013 | PULLER KNOCKER DIFFUSER CASE COMPRESSOR STATOR EXIT | 1 | |
| PWA81463 | SIMULATOR HPC VARIABLE STATOR VANE PIN WEAR | 1 | |
| PWA81816 | PULLER HPC STATOR | 1 | |
| PWA82027 | PULLER HPC STATOR | 1 | |
| PWA85223 | HANDLING ENG ASSY LPT ROTOR AND STATOR ASSY REAR | 1 | |
| PWA85224 | HANDLING ENG ASSY LPT ROTOR AND STATOR ASSY REAR | 1 | |
| PWA85283 | FRONT ENGINE ASSY LPT ROTOR AND STATOR ASSY | 1 | |
| PWA85284 | FRONT ENGINE ASSY LPT ROTOR AND STATOR ASSY | 1 | |
| PWA85286 | FRONT ENGINE ASSY LPT ROTOR AND STATOR ASSY | 1 | |
| PWA85287 | FRONT ENGINE ASSY LPT ROTOR AND STATOR ASSY | 1 | |
| PWA85290 | FRONT ENGINE ASSY LPT ROTOR AND STATOR ASSY | 1 | |
| PWA85294 | FRONT ENGINE ASSY LPT ROTOR AND STATOR ASSY | 1 | |
| PWA85313 | INSTALL AND REMOVE LPC ROTOR AND STATOR ASSY | 1 | |
| PWA85314 | INSTALL AND REMOVE LPC ROTOR AND STATOR ASSY | 1 | |
| PWA85315 | INSTALL AND REMOVE LPC ROTOR AND STATOR ASSY | 1 | |
| PWA85600 | MACHINING STATOR LPC 1.6,2 AND 3RD STAGE INNER AIRSEAL RING | 1 | |
| PWA85688 | PULLER-JACKSCREW VARIABLE STATOR VANE ACTUATOR | 9 | |
| PWA86060 | GAGE THICKNESS HPC STATOR VANE | 1 | |
| PWA86061 | GAGE THICKNESS HPC STATOR VANE | 1 | |
| PWA86062 | GAGE THICKNESS HPC STATOR VANE | 1 | |
| PWA86064 | GAGE THICKNESS HPC STATOR VANE | 1 | |
| PWA86066 | GAGE THICKNESS HPC STATOR VANE | 1 | |
| PWA86068 | GAGE THICKNESS HPC STATOR VANE | 1 | |
| PWA86080 | GAGE THICKNESS HPC STATOR VANE | 1 | |
| PWA86081 | GAGE THICKNESS HPC STATOR VANE | 7 | |
| PWA86097 | PIN RIGGING VARIABLE STATOR VANE ACTUATOR | 8 | |
| PWA86125 | SIMULATOR-STATOR VANE ACTUATOR | 1 | |
| PWA86317 | BOX CONTROL STATOR WAVE RIGGING | 1 | |
| PWA86344 | LOCK - ACTUATOR, HPC VARIABLE STATOR VANE RIGGING | 6 | |
| PWA86437 | ROTOR AND STATOR ASSY LPT | 1 | |
| PWA86603 | ASSY COMPRESSOR STATOR SET 13 & 14 STAGE | 2 | |
| PWA87166 | STATOR CASE AIRSEAL SET HPC | 1 | |
| PWA9161 | KIT RIG STATOR VANE | 1 | |
| PWC31404 | PULLER STATOR | 1 | |
| PWC32031 | DRIFT-PT, HOUSING STATOR AIR SEAL | 2 | |
| PWC32047 | PULLER-PT, HOUSING STATOR AIR SEAL | 1 | |
| PWC37845 | Toll PT Stator Installation | 4 | |
| PWC40031 | STATOR ADAPTER | 1 | |
| PWC40446 | CRIMPER 4 TH STG STATOR | 1 | |
| PWC40584 | HOLDER-CORE STATOR | 1 | |
| PWC40724 | Puller Core-Stator Holder | 1 | |
| PWC40778 | HOLDER-STATOR | 1 | |
| PWC50137 | DRIFT, INTERSTAGE TURBINE STATORSEAL | 2 | |
| PWC50214 | LOCATOR, TURBINE STATOR AIR SEAL ASSEMBLY | 5 | |
| PWC51918 | Support Ring 3RD Stage Stator Compressor | 1 | |
| PWC51919 | RING 2ND STAGE STATOR COMPRESSOR | 1 | |
| PWC51920 | RING 1ST STAGE STATOR COMPRESSOR | 1 | |
| PWC51921 | Ring 3RD Stage Stator Compressor | 1 | |
| PWC57723 | PAINT MASK 1ST STATOR | 1 | |
| PWC60643 | Pliers, Stator Assembly | 1 | |
| PWC61412 | CORE STATOR HOLDER | 1 | |
| PWC62472 | Puller Stator | 4 | |
| PWC62660 | ASSY-2ND STG STATOR | 1 | |
| PWC62665 | ASSY-4TH STAGE STATOR | 1 | |
| PWC69703 | PAD REACTION SHROUD STATOR | 1 | |
| PWC70900 | WRENCH COMPRESSOR STATOR | 1 | |
| PWC71637 | FIRST STAGE STATOR PULLER | 2 | |
| PWC72056 | DRIFT REMOVAL STATOR AIR SEAL FROM GG CASE | 1 | |
| PWC77145 | SECOND STAGE STATOR PULLER | 2 | |
| R24MAY00176 | ACTUATOR, LPC, STATOR VANE | 1 | |
| RRT028158 | DRIFT STATOR VANE GROOVE | 1 | |
| RRT028504 | STORAGE BOX - IP STAGE 3,4 & 8 STATOR VANE STOPS | 1 | |
| RRT037455 | PIN - GUIDE - ALIGN / GUIDE PMA STATOR OVER ROTOR | 3 | |
| RRT061242 | PMA STATOR TO GEARBOX GUIDE PIN | 2 | |
| RRT069128 | SUPPORT RING - STAGE 6 STATOR | 1 | |
| RRT069131 | SUPPORT RING - STAGE 5 STATOR | 1 | |
| RRT069137 | SUPPORT RING - STAGE 2 STATOR | 1 | |
| ST0446 | Stator Assembly Adapter | 1 | |
| T-449384 | Tool-Stator Extracting | 1 | |
| T-63372 | Stator Torque Fixture | 1 | |
| T449410 | STATOR ASSEMBLY TOOL | 1 | |
| T451754 | STATOR REMOVAL TOOL | 1 | |
| T5735 | TOOL, STATOR INSTALLATION | 1 | |
| TB9104G001 | STATOR PULLER TOOL | 1 | |
| TES-5512 | Gage,Stator | 1 | |
| TES-5512PM | GAGE,STATOR | 1 | |
| TM30200 | Stators assembly table | 1 | |
| XW80200 | STATOR ASSEMBLY TABLE | 1 | |
| ]10C2044G02 | FIXTURE, RESTRAINING LPT ROTOR/STATOR, | 1 | |
| lC5759 | GAGE, CONCENTRICITY-VARIABLE STATOR INTERSTAGE SEAL. FM | 1 | |
| lC6274 | FIXTURE SET, INSPECTION - LPT STATOR SEAL, STG. 2 | 1 | |
| lC6279 | FIXTURE SET, INSP. LPT STATOR SEAL, STAGE 4 TF39 ENG. | 1 | |
| lC6280 | FIXTURE , INSP. LPT STATOR SEAL, STG. 3 | 1 | |
| lC6282 | FIXTURE, INSP. LPT STATOR SEAL, STG. 6 | 1 | |
| lC628l | FIXTURE, INSP. LPT STATOR SEAL, STG. 5 | 1 | |
| lC6870 | DOLLY, PLATFORM- LPT STATOR CASE ASSY VERT BUILDUP | 1 | |
| lC687l | CASE, DUMMY-LPT STATOR | 1 | |
| lC6l04 | FIXTURE, VANE TIP GRINDING - FRONT COMPR STATOR CA | 1 | |
| lC6l93 | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
