| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| NDT 3104 | STANDARDS | 2 | |
| NDT 3166-007 | STANDARDS | 4 | |
| NDT3094 | STANDARDS | 2 | |
| NDT3153-B | STANDARDS | 3 | |
| NDT3153-C | STANDARDS | 3 | |
| NDT3153-G | STANDARDS | 3 | |
| NDT3153-H | STANDARDS | 3 | |
| NDT3153-J | STANDARDS | 3 | |
| NDT3190-A | STANDARDS | 2 | |
| NDT3191 | STANDARDS | 2 | |
| NDT3192 | STANDARDS | 2 | |
| NDT3209-A | STANDARDS | 2 | |
| NDT3238 | STANDARDS | 2 | |
| NDT3273A | STANDARDS | 1 | |
| NDT348 | STANDARDS | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 530G12406-1-3 | CALIBRATION STANDARDS-STEEL (CALIBRATION) | 1 | |
| 1001 | REFERENCE STANDARDS | 10 | |
| 1002 | REFERENCE STANDARDS | 4 | |
| 1004 | REFERENCE STANDARDS | 6 | |
| 1005 | REFERENCE STANDARDS | 6 | |
| 1006 | REFERENCE STANDARDS | 1 | |
| 1007 | REFERENCE STANDARDS | 1 | |
| 1008 | REFERENCE STANDARDS | 1 | |
| 1009 | REFERENCE STANDARDS | 1 | |
| 1010 | REFERENCE STANDARDS | 1 | |
| 10079061 | REFERENCE STANDARDS | 1 | |
| 10U10WPCC5 | EYES PROTECTIVE GLASSES OR EQUIVALENT GLASSES COMPLIANT TO THE STANDARDS EN166, EN170, EN172 AND 175) | 1 | |
| 111502-1 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (STANLEY) | 1 | |
| 111515-1 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (STANLEY) | 1 | |
| 127-,050 | REFERENCE STANDARDS | 1 | |
| 127-,063 | REFERENCE STANDARDS | 1 | |
| 127-,080 | REFERENCE STANDARDS | 1 | |
| 127-,090 | REFERENCE STANDARDS | 1 | |
| 127-,110 | REFERENCE STANDARDS | 1 | |
| 127-,125 | REFERENCE STANDARDS | 1 | |
| 185 | REFERENCE STANDARDS | 2 | |
| 5414 | TORQUE SCREWDRIVER VALVE CORE DRIVER WITH PRESET TORQUE TO TIRE & RIM STANDARDS | 7 | |
| 1353316 | SOLID COMPOSITE LAMINATE NDI REFERENCE STANDARDS | 1 | |
| 186A | REFERENCE STANDARDS | 3 | |
| 186B | REFERENCE STANDARDS | 3 | |
| 186C | REFERENCE STANDARDS | 4 | |
| 186D | REFERENCE STANDARDS | 4 | |
| 186E | REFERENCE STANDARDS | 4 | |
| 186F | REFERENCE STANDARDS | 3 | |
| 2054399 | Bowers 10-7524 Surface Roughness Standards | 1 | |
| 29A029 | REFERENCE STANDARDS | 5 | |
| 29A049 | REFERENCE STANDARDS | 2 | |
| 530G12406-1-3 | CALIBRATION STANDARDS-STEEL | 1 | |
| 906-10272-5 | CALIBRATION UNIT - STANDARDS | 4 | |
| 9522321 | CONDUCTIVITY STANDARDS | 1 | |
| 98S57205030000 | CARBON PANEL CALIBRATION STANDARDS | 3 | |
| 98S57205030001 | CARBON PANEL CALIBRATION STANDARDS | 4 | |
| 98S57205030004 | CARBON PANEL CALIBRATION STANDARDS | 5 | |
| 99A14144-101 | ET CALIBRATION TEST STANDARDS | 1 | |
| 99A14144−101 | CALIBRATION TEST STANDARDS FOR HFEC AND LFEC INSPE | 1 | |
| 99A14145-101 | ET CALIBRATION TEST STANDARDS | 1 | |
| 99A51003000000 | REFERENCE STANDARDS 99A51003000000 | 2 | |
| 99A52103001000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 1 | |
| 99A53003001103 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 4 | |
| 99A53003001104 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 4 | |
| 99A53003001105 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 4 | |
| 99A53003001108 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 4 | |
| 99A53107287000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 7 | |
| 99D51407291001 | ELECTRICAL STANDARDS | 7 | |
| 99D53103000000 | Airbus Standards, A320 PT4 53-11-04:PG404 FIG403 | 5 | |
| 99D53107287000 | Reference Standards | 1 | |
| 99D53203000000 | Reference Standards | 1 | |
| 99D53419001000 | Reference Standards | 1 | |
| 99D54403000001 | Reference Standards | 1 | |
| 99D54403002000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 4 | |
| 99D54403003000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 4 | |
| 99D54403030000 | Reference Standards | 1 | |
| 99D55109001000 | Airbus Carbon Standard, ALL PT4 51-10-06:FIG402 PG404, Set of standards 1-4 & Tape Material | 7 | |
| 99D57004000040 | Reference Standards | 1 | |
| 99D57103000000 | Reference Standards | 1 | |
| 99D57103001000 | Reference Standards | 1 | |
| 99D57103007000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 3 | |
| 99D57103013000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 6 | |
| 99D57103015000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 4 | |
| 99D57103016000 | REFERENCE STANDARDS | 7 | |
| 99D57103021000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 5 | |
| 99D57204101000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 1 | |
| 99D57204105000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 5 | |
| 99D57204116000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 3 | |
| 99D57504100000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 2 | |
| 99D57504102000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 4 | |
| 99D57504103000 | Reference Standards | 1 | |
| 99D57504103001 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 3 | |
| 99D57504106000 | Reference Standards | 1 | |
| 99D57504107000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 2 | |
| 99D57504108000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 2 | |
| 99D57704100000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 3 | |
| 99F53303108000 | AIRBUS REFERENCE STANDARDS A340-500/-600 53-39-08-22-23. Includes Test Report and Certificate of Conformance. | 1 | |
| A389A | REFERENCESTANDARDS | 3 | |
| ACPK-HAWKER | Hawker Kit; nose/main standards and probes. *Customer to supply wheels. | 1 | |
| ACPK-MD11 | MD11 Kit; nose/main standards and probes. Customer to supply wheel. | 1 | |
| AF-4125/100H | CUSTOM REFLECTION RING PROBE 1.2" OD, .605" ID, 50Hz-3KHz TRIAX FISHER CONNECTOR. 737 PART 6 57-10-58, pg.2. and 737 PART 6 57-10-54, pg.2 USED WITH NDT3153-X AND 3167-X SERIES REFERENCE STANDARDS. Includes Test Report and Certificate of Conform... | 1 | |
| AFK-1031UT | NDT STANDARDS AND TRANSDUCERS KIT | 1 | |
| AFK-ECS6 | EDDY CURRENT SURFACE PROBE KIT. Includes the Following Cable, Surface standards and probes: ACN16-TF6-B, AFNDT-2030/4340, AFNDT-2030/7075-T6, ATPN-45-5, ATPN-45-5FX, ATPN-5, ATPN-5FX, ATPN-95-5, ATPN-95-5, PELICAN STYLE WATERPROOF kIT BOX. Supplied wit... | 1 | |
| AFNDT-2227TI | CUSTOM TITANIUM EDDY CURRENT MULTI HOLE STANDARD WHICH COMBINES BOEING PART NUMBERS NDT1022-NDT1027 STANDARDS INTO ONE PART..HOLE SIZES ( 0.188", 0.250", 0.313", 0.375",0.438", 0.500" ). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AFNDT-2227Ti | CUSTOM TITANIUM EDDY CURRENT MULTI HOLE STANDARD WHICH COMBINES BOEING PART NUMBERS NDT1022-NDT1027 STANDARDS INTO ONE PART..HOLE SIZES ( 0.188", 0.250", 0.313", 0.375",0.438", 0.500" ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3104 | The VMA.01-0-07 reference standard is ..3 ½” long x 3.0” wide x 1/4” thick...• The tapered notch on both standards is 0.080” deep at the edge of the standard and tapers to 0.000” deep...• The tapered notch has scribe marks every 0.010” deep from 0.000”... | 1 | |
| AFNDT-3219AL | REFERENCE STANDARDS | 1 | |
| AGE-04329-401 | STANDARDS SET - REFERENCE | 1 | |
| AGE-04383-001 | STANDARDS SET - REFERENCE, NDI – GENERAL EDDY CURRENT TEST | 1 | |
| AGE-04383-003 | STANDARDS SET, REFERENCE, NDI - GENENRAL ADDY CURRENT TEST | 1 | |
| AL29-32 | NDT, STANDARDS, CALIBRATION | 6 | |
| AL35-45 | NDT, STANDARDS, CALIBRATION | 8 | |
| AM2563 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (AGSE) | 2 | |
| AM27118 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (AGSE) | 1 | |
| ANDT1049 | REFERENCE STANDARDS | 3 | |
| ANDT3016 | REFERENCE STANDARDS | 1 | |
| ARP-1.2/100H-7 | LOW FREQUENCY REFLECTION RING PROBE 1.2" OD, .605" ID, 50Hz-3KHz TRIAX FISHER CONNECTOR. 737 PART 6 57-10-58, pg.2. and 737 PART 6 57-10-54, pg.2 USED WITH NDT3153-X AND 3167-X SERIES REFERENCE STANDARDS. Includes Test Report and Certificate of ... | 1 | |
| ARP-1_2/100H-7 | LOW FREQUENCY REFLECTION RING PROBE 1.2" OD, .605" ID, 50HZ-3KHZ TRIAX FISHER CONNECTOR. 737 PART 6 57-10-58, PG.2. AND 737 PART 6 57-10-54, PG.2 USED WITH NDT3153-X AND 3167-X SERIES REFERENCE STANDARDS. INCLUDES TEST REPORT AND CERTIFICATE OF ... | 1 | |
| ASTW-8 | CUSTOM ACRYLIC CALIBRATION STANDARDS, SET OF 8, THICKNESS .921 / .818 / .559 / .504 / .275 / .248 / .157 / .134 | 1 | |
| ATBC-ALU 1200 | REFERENCE STANDARDS | 1 | |
| ATBC-ALU 2014A-T6 | REFERENCE STANDARDS | 1 | |
| C12-PCS-3C1N | REFERENCE STANDARDS: | 3 | |
| CC817 | Starrett S234MG SET STANDARDS 25-275MM | 1 | |
| CC825 | Starrett S234J SET STANDARDS 12-23" | 1 | |
| CM-ET-ASIG010 | DUAL CONDUCTIVITY REFERENCE STANDARDS, NOMINAL VALUES 9.4 AND 101 IACS (SIGMACHECK/SIGMACHECK2), NIST VALUES | 1 | |
| CREF4-173259100 | CONDUCTIVITY STANDARDS | 1 | |
| CU882 | Starrett S436MFXRLZ MIC SET + STANDARDS | 1 | |
| DAC ETOH MG.060-5/8-1/8 | EDM notch re-certification of reference standards and SN engraving | 1 | |
| DHC29381-001 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| EXBD40-50013-011 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| EXBD400-50013-001 | CALIBRATION TEST STANDARDS FOR ECA INSPECTION (DHC) | 1 | |
| EXBD400-50013-003 | CALIBRATION TEST STANDARDS FOR ECA INSPECTION | 1 | |
| EXBD400-50013-005 | CALIBRATION TEST STANDARDS FOR ECA INSPECTION (DHC) | 1 | |
| EXBD400-50013−011 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| EXBD400-50013−013 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| EXBD400-50074-001 | CALIBRATION TEST STANDARDS | 2 | |
| EXBD400-50156-001 | CALIBRATION TEST STANDARDS CTSS | 1 | |
| EXBD400-50156-002 | CALIBRATION TEST STANDARDS CTSS | 1 | |
| EXBD400−50013−011 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| FAS5059 | C0NDUCTIVITY STANDARDS 1.041 | 1 | |
| FB70-010-1B | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (FRANK BROWN) | 3 | |
| FB70-077-200 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (FRANK BROWN) | 7 | |
| GSE 539 | GSE 539 STANDARDS SET - REFERENCE, NDI - GENERAL EDDY CURRENT TES | 1 | |
| INCONEL718 | NDT, STANDARDS, CALIBRATION | 1 | |
| MAT/ULT/183 | CALIBRATION TEST STANDARDS (CTS) | 2 | |
| NDT 1072 | REFERENCE STANDARDS | 2 | |
| NDT 3305A | REFERENCE STANDARDS | 2 | |
| NDT1018 | REFERENCE STANDARDS | 3 | |
| NDT1020 | REFERENCE STANDARDS | 2 | |
| NDT1024 | REFERENCE STANDARDS | 2 | |
| NDT1027 | REFERENCE STANDARDS | 2 | |
| NDT1027-.188/.500 | CUSTOM TITANIUM EDDY CURRENT MULTI HOLE STANDARD WHICH COMBINES BOEING PART NUMBERS NDT1022-NDT1027 STANDARDS INTO ONE PART..HOLE SIZES ( 0.188", 0.250", 0.313", 0.375",0.438", 0.500" ). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT1061 | REFERENCE STANDARDS | 2 | |
| NDT1062 | REFERENCE STANDARDS | 2 | |
| NDT1072 | REFERENCE STANDARDS | 2 | |
| NDT1083 | REFERENCE STANDARDS | 1 | |
| NDT1083-.625 | REFERENCE STANDARDS | 1 | |
| NDT1083-0.563 | REFERENCE STANDARDS | 1 | |
| NDT1083-0.688 | REFERENCE STANDARDS | 1 | |
| NDT1083-0.750 | REFERENCE STANDARDS | 2 | |
| NDT1083-0.813 | REFERENCE STANDARDS | 1 | |
| NDT1083-0.875 | REFERENCE STANDARDS | 1 | |
| NDT1083-0.938 | REFERENCE STANDARDS | 1 | |
| NDT1083-0_750 | REFERENCE STANDARDS | 2 | |
| NDT1083-1.000 | REFERENCE STANDARDS | 1 | |
| NDT1084 | REFERENCE STANDARDS | 1 | |
| NDT1084-0.938 | REFERENCE STANDARDS | 1 | |
| NDT1084-0_938 | REFERENCE STANDARDS | 1 | |
| NDT1087-1 | BOEING REFERENCE STANDARDS | 4 | |
| NDT1087-10 | BOEING REFERENCE STANDARDS | 2 | |
| NDT1087-11 | BOEING REFERENCE STANDARDS | 2 | |
| NDT1087-12 | BOEING REFERENCE STANDARDS | 2 | |
| NDT1087-13 | BOEING REFERENCE STANDARDS | 2 | |
| NDT1087-14 | BOEING REFERENCE STANDARDS | 3 | |
| NDT1087-2 | BOEING REFERENCE STANDARDS | 3 | |
| NDT1087-3 | BOEING REFERENCE STANDARDS | 3 | |
| NDT1087-4 | BOEING REFERENCE STANDARDS | 3 | |
| NDT1087-5 | BOEING REFERENCE STANDARDS | 2 | |
| NDT1087-6 | BOEING REFERENCE STANDARDS | 2 | |
| NDT1087-7 | BOEING REFERENCE STANDARDS | 2 | |
| NDT1087-8 | BOEING REFERENCE STANDARDS | 2 | |
| NDT1087-9 | BOEING REFERENCE STANDARDS | 2 | |
| NDT1087-P1 | PROBE GUIDE USED WITH NDT1087 SERIES REFERENCE STANDARDS. BOEING 737 PART 6 53-30-00 and 777 PART 6 53-00-09 PAGE 9 FIGURE 3 | 3 | |
| NDT1089-0.125 | REFER STANDARDS | 2 | |
| NDT1089-0_125 | REFER STANDARDS | 2 | |
| NDT192 | REFERENCE STANDARDS | 1 | |
| NDT3065-STL | REFERENCE STANDARDS | 2 | |
| NDT3100 | REFERENCE STANDARDS | 2 | |
| NDT3102 | REFERENCE STANDARDS | 1 | |
| NDT3107 | REFERENCE STANDARDS | 1 | |
| NDT3111 | REFERENCE STANDARDS | 1 | |
| NDT3116 | REFERENCE STANDARDS | 2 | |
| NDT3133 | REFERENCE STANDARDS | 2 | |
| NDT3136 | REFERENCE STANDARDS | 1 | |
| NDT3137 | REFERENCE STANDARDS | 2 | |
| NDT3139 | REFERENCE STANDARDS | 2 | |
| NDT3149 | REFERENCE STANDARDS | 2 | |
| NDT3152-A | BOEING REFERENCE STANDARDS | 3 | |
| NDT3152-B | BOEING REFERENCE STANDARDS | 3 | |
| NDT3152-C | BOEING REFERENCE STANDARDS | 3 | |
| NDT3152-D | BOEING REFERENCE STANDARDS | 3 | |
| NDT3152-E | BOEING REFERENCE STANDARDS | 3 | |
| NDT3152-F | BOEING REFERENCE STANDARDS | 3 | |
| NDT3152-G | BOEING REFERENCE STANDARDS | 3 | |
| NDT3152-H | BOEING REFERENCE STANDARDS | 3 | |
| NDT3152-I | BOEING REFERENCE STANDARDS | 3 | |
| NDT3152-J | BOEING REFERENCE STANDARDS | 3 | |
| NDT3152-K | BOEING REFERENCE STANDARDS | 3 | |
| NDT3153-A | BOEING REFERENCE STANDARDS | 3 | |
| NDT3153-B | BOEING REFERENCE STANDARDS | 3 | |
| NDT3153-C | BOEING REFERENCE STANDARDS | 3 | |
| NDT3153-D | BOEING REFERENCE STANDARDS | 3 | |
| NDT3153-E | BOEING REFERENCE STANDARDS | 3 | |
| NDT3153-F | BOEING REFERENCE STANDARDS | 3 | |
| NDT3153-G | BOEING REFERENCE STANDARDS | 3 | |
| NDT3153-H | BOEING REFERENCE STANDARDS | 3 | |
| NDT3153-J | BOEING REFERENCE STANDARDS | 3 | |
| NDT3156 | REFERENCE STANDARDS | 4 | |
| NDT3157 | REFERENCE STANDARDS | 4 | |
| NDT3159 | REFERENCE STANDARDS | 4 | |
| NDT3161 | REFERENCE STANDARDS | 3 | |
| NDT3162 | REFERENCE STANDARDS | 4 | |
| NDT3163 | REFERENCE STANDARDS | 2 | |
| NDT3164 | REFERENCE STANDARDS | 3 | |
| NDT3166-003 | REFERENCE STANDARDS | 3 | |
| NDT3166-006 | REFERENCE STANDARDS | 4 | |
| NDT3166-007 | REFERENCE STANDARDS | 4 | |
| NDT3167-A | BOEING REFERENCE STANDARDS | 3 | |
| NDT3167-B | BOEING REFERENCE STANDARDS | 3 | |
| NDT3167-C | BOEING REFERENCE STANDARDS | 3 | |
| NDT3167-D | BOEING REFERENCE STANDARDS | 3 | |
| NDT3167-E | BOEING REFERENCE STANDARDS | 3 | |
| NDT3167-F | BOEING REFERENCE STANDARDS | 3 | |
| NDT3167-G | BOEING REFERENCE STANDARDS | 3 | |
| NDT3167-H | BOEING REFERENCE STANDARDS | 3 | |
| NDT3167-J | BOEING REFERENCE STANDARDS | 3 | |
| NDT3168 | REFERENCE STANDARDS | 3 | |
| NDT3169 | REFERENCE STANDARDS | 1 | |
| NDT3170 | REFERENCE STANDARDS | 5 | |
| NDT3171 | REFERENCE STANDARDS | 5 | |
| NDT3172 | REFERENCE STANDARDS | 3 | |
| NDT3178-A | REFERENCE STANDARDS | 2 | |
| NDT3186 | REFERENCE STANDARDS | 3 | |
| NDT3187 | REFERENCE STANDARDS | 3 | |
| NDT3202-G | REFERENCE STANDARDS | 1 | |
| NDT3210 | REFERENCE STANDARDS | 1 | |
| NDT3214 | REFERENCE STANDARDS | 1 | |
| NDT3217-A | REFERENCE STANDARDS | 1 | |
| NDT3217-B | REFERENCE STANDARDS | 1 | |
| NDT3218 | REFERENCE STANDARDS | 2 | |
| NDT3231 | REFERENCE STANDARDS | 2 | |
| NDT3276 | REFERENCE STANDARDS | 2 | |
| NDT3276A | REFERENCE STANDARDS | 2 | |
| NDT3278-A | REFERENCE STANDARDS | 2 | |
| NDT3278-B | REFERENCE STANDARDS | 2 | |
| NDT3278-C | REFERENCE STANDARDS | 2 | |
| NDT3305A | REFERENCE STANDARDS | 2 | |
| NDT3305B | REFERENCE STANDARDS | 3 | |
| NDT3312 | REFERENCE STANDARDS | 2 | |
| NDT4232 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 2, Page 6. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4233 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 3, Page 7. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4234 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 4, Page 8. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4235 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 5, Page 9. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4236 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4237 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4238 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4239 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT6130-1 | REFER STANDARDS | 1 | |
| NDT6130-2 | REFER STANDARDS | 1 | |
| NDT6130-3 | REFER STANDARDS | 1 | |
| NDT6130-4 | REFER STANDARDS | 1 | |
| NDT6130-5 | REFER STANDARDS | 1 | |
| NDT6130-6 | REFER STANDARDS | 1 | |
| NDT644 | REFERENCE STANDARDS | 4 | |
| NDT7010A | REFERENCE STANDARDS | 1 | |
| NDT7010B | REFERENCE STANDARDS | 1 | |
| NDT7013 | REFER STANDARDS | 1 | |
| NDT7014 | REFERENCE STANDARDS | 2 | |
| NDT7015-A | REFER STANDARDS | 1 | |
| NDT7015-B | REFER STANDARDS | 1 | |
| NDT7015-C | REFER STANDARDS | 1 | |
| NDT7019-A | REFERENCE STANDARDS | 1 | |
| NDT7019-B | REFERENCE STANDARDS | 1 | |
| NDT7033 | REFER STANDARDS | 1 | |
| NDT7034-1 | REFER STANDARDS | 1 | |
| NDT7034-2 | REFER STANDARDS | 1 | |
| NDT7038A | REFER STANDARDS | 1 | |
| NDT7038B | REFER STANDARDS | 1 | |
| NDT708 | REFERENCE STANDARDS | 1 | |
| NDT728 | REFERENCE STANDARDS | 2 | |
| NDT732A | REFERENCE STANDARDS | 2 | |
| NDT737 | REFERENCE STANDARDS | 2 | |
| NDT738 | REFERENCE STANDARDS | 2 | |
| NDT739 | REFERENCE STANDARDS | 2 | |
| NDT745 | REFERENCE STANDARDS | 2 | |
| NDT746 | REFERENCE STANDARDS | 2 | |
| NDT747-1 | REFERENCE STANDARDS | 2 | |
| NDT747-2 | REFERENCE STANDARDS | 2 | |
| NDT749 | REFERENCE STANDARDS | 2 | |
| NDT753 | REFER STANDARDS | 2 | |
| NDT754 | REFERENCE STANDARDS | 2 | |
| NDT755 | REFERENCE STANDARDS | 2 | |
| NDT756 | REFERENCE STANDARDS | 2 | |
| NDT757A | REFER STANDARDS | 1 | |
| NDT760 | REFERENCE STANDARDS | 2 | |
| NDT762 | REFERENCE STANDARDS | 2 | |
| NDT766 | REFERENCE STANDARDS | 2 | |
| NDT766A | REFERENCE STANDARDS | 2 | |
| NDT767 | REFERENCE STANDARDS | 2 | |
| NDT767A | REFERENCE STANDARDS | 2 | |
| NDT768 | REFERENCE STANDARDS | 2 | |
| NDT769 | REFERENCE STANDARDS | 2 | |
| NDT770 | REFERENCE STANDARDS | 2 | |
| NDT771 | REFERENCE STANDARDS | 2 | |
| NDT772 | REFERENCE STANDARDS | 2 | |
| NDT773 | REFERENCE STANDARDS | 2 | |
| NDT774 | REFERENCE STANDARDS | 2 | |
| NDT775 | REFERENCE STANDARDS | 1 | |
| NDT786-A | REFERENCE STANDARDS | 2 | |
| NDT786-B | REFERENCE STANDARDS | 2 | |
| NDT799 | REFERENCE STANDARDS | 2 | |
| NRK-3AST | CUSTOM NAVY BLOCK SET, 3 Blocks Total. Materials: 7075-T6 Aluminum, 4340 Cres Steel and 6AL-4V Titanium. Each Standard Includes 20 Fastener Holes (.156-.750) Containing a total of 71 EDM Notches. All Standards Manufactured in Accordance with U.S.A.F. ... | 1 | |
| PDL-1030 | CALIBRATING STANDARDS | 1 | |
| PDL-1155 | CALIBRATING STANDARDS | 2 | |
| PDL-1214J | CALIBRATING STANDARDS | 2 | |
| PDL-419 | CALIBRATING STANDARDS (AS ILLUSTRATED SP-96) | 1 | |
| PDL-457A | CALIBRATING STANDARDS, BOLT HOLE, ALUMINUM 7075-T6 | 1 | |
| PDL-457S | CALIBRATING STANDARDS, BOLT HOLE, STEEL 4340 | 1 | |
| PDL-459 | CALIBRATING STANDARDS | 1 | |
| PDL-843 | CALIBRATING STANDARDS | 1 | |
| PDL-917 | CALIBRATING STANDARDS | 2 | |
| PDL-919 | CALIBRATING STANDARDS | 2 | |
| PDL-920 | CALIBRATING STANDARDS | 2 | |
| PDL-944-2 | CALIBRATING STANDARDS | 1 | |
| PDL-980 | CALIBRATING STANDARDS | 2 | |
| RDP1.2-100H-7 | REFERENCE STANDARDS | 2 | |
| ROLLS | STANDARDS MATERIAL FOR BORESCOPE | 1 | |
| ROLLS ROYCE | STANDARDS MATERIAL FOR BORESCOPE | 1 | |
| ROLLSROYCE | STANDARDSMATERIALFORBOROSCOPY | 1 | |
| RS0512M-7075T6 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 1 | |
| RS0824-4340-VMS3RS-062 | Reference Standards are 3” Long x 2” Wide x ¼” Thick, 3 Surface EDM notches: 0.008” deep x 0.062” long, 0.020” deep x 0.062” long and 0.040” deep x 0.062” long | 1 | |
| RSN-3AST | Gage Set NSN 5280-01-352-1336, Consist of 7075T6, 4340 & 6AL4V Standards | 1 | |
| Rolls Royce | STANDARDS material for boroscopy | 1 | |
| SCA-N2-KIT-DIN477 | DIN 477 NITROGEN REGULATOR BRACKET KIT (OTHER NATIONAL STANDARDS ON STOCK ALSO) | 1 | |
| SRS-0824A | SURFACE STANDARDS | 3 | |
| SRS-4A | REFERENCE STANDARDS | 1 | |
| ST8870B-7 | REFERENCE STANDARDS BMS8-79(FIBERGLASS) | 3 | |
| ST8870B-8 | REFERENCE STANDARDS BMS8-79(FIBERGLASS) | 3 | |
| ST8870B-9 | REFERENCE STANDARDS BMS8-79(FIBERGLASS) | 3 | |
| ST8870C-7 | REFERENCE STANDARDS BMS8-139(FIBERGLASS) | 2 | |
| ST8870C-8 | REFERENCE STANDARDS BMS8-139(FIBERGLASS) | 2 | |
| ST8870C-9 | REFERENCE STANDARDS BMS8-139(FIBERGLASS) | 2 | |
| STD-1--AL | Custom Radius Channel Standard Material: 7075-T651 ALUMINUM. Standard to include a total of 62 EDM flaws identified as A, B,C, D, E, and F in the drawing. Includes test report traceable to NIST standards which comply with MIL-Q-9858A, Mil-4-45208A. | 1 | |
| STD-1-TI | Custom Radius Channel Standard Material: 6AL-4V Titanium. Standard to include a total of 62 EDM flaws identified as A, B,C, D, E, and F in the drawing. Includes test report traceable to NIST standards which comply with MIL-Q-9858A, Mil-4-45208A. | 1 | |
| Stackable Standard | Set of 4 standards, 2024T3 Plates, 0.040", 0.063", 0.068", 0.071", 0.100" | 1 | |
| TEK-5050-767 | Transducer Kit includes TEK-5050-1 Thru -6 for NDT6025-1 thru -6 standards | 1 | |
| TEK-5129-T-2 | REFERENCE STANDARDS | 1 | |
| TEKIT-396 | Boeing Reference Standards, 737 PT6 53-30-44, PG7 FIG 2, Kit includes NDT396-36/36, NDT396-40/40, NDT396-45/40, NDT396-50/40, NDT396-56/40, Pelican case 1150 | 1 | |
| TEKIT-5050-767 | TRANSDUCER KIT INCLUDES TEK-5050-1 THRU -6 FOR NDT6025-1 THRU -6 STANDARDS | 1 | |
| UT7005-48 | INDEX BUSHING, NON-ANSI STANDARDS TOLERANCES 1/4 X 3/8 X 1/2 | 1 | |
| WK-314M | WHEEL STANDARDS NORTEC | 1 | |
| WK-314M, | WHEEL STANDARDS NORTEC | 1 | |
| WK-314M, WK-314N | Wheel Standards Nortec | 1 | |
| WK-314N | WHEELS STANDARDS NORTEC | 1 | |
| WK-737M/100-200, | WHEEL STANDARDS NORTEC | 1 | |
| WK-737M/100-200, WK-737N/100-200 | Wheel Standards Nortec | 1 | |
| WK-737N/100-200 | WHEEL STANDARDS NORTEC | 1 | |
| WK-C130M, | WHEEL STANDARDS NORTEC | 1 | |
| WK-C130M, WK-C130N | Wheel Standards Nortec | 1 | |
| WK-C130N | WHEEL STANDARDS NORTEC | 1 | |
| WP632- CALIBRATI ON | TRACEABLE CALIBRATION OF WOODPECKER WP-632AM-R HANDPIECE TO NATIONAL STANDARDS | 1 | |
| WP632- CALIBRATION | TRACEABLE CALIBRATION OF WOODPECKER WP-632AM-R HANDPIECE TO NATIONAL STANDARDS | 1 | |
| XBD400-50013-013 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
