| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| DK-A320-53-1378-1 | STANDARD TOOL | 3 | |
| DKA320531378-1 | STANDARD TOOL | 3 | |
| DKA3205313781 | STANDARD TOOL | 3 | |
| DKA3205313791 | STANDARD TOOL | 2 | |
| DKA320531381-1 | STANDARD TOOL | 1 | |
| EKA 3205313781 | STANDARD TOOL | 3 | |
| EKA3205313791 | STANDARD TOOL | 2 | |
| FTIA3205313781 | STANDARD TOOL | 1 | |
| FTIA3205313791 | STANDARD TOOL | 1 | |
| PWA 75523 | STANDARD TOOL | 1 | |
| ST1065C | STANDARD TOOL | 6 | |
| ST1066RB | STANDARD TOOL | 3 | |
| ST1742F-1 | STANDARD TOOL | 8 | |
| ST2580-334C | STANDARD TOOL | 3 | |
| ST30-8783A-54 | STANDARD TOOL | 2 | |
| ST869EA-700 | Standard tool | 1 | |
| ST8709H-1 | STANDARD TOOL | 8 | |
| ST918A-190-500 | Standard Tool | 1 | |
| ST918A-625-1062 | Standard Tool | 1 | |
| ST919-1062 | Standard Tool | 1 | |
| ST925-625-1062 | Standard Tool | 1 | |
| ST929-2C-250-750-28 | Standard tool | 1 | |
| ST929-2C-250-750-281 | Standard tool | 1 | |
| ST931-1000-1750 | Standard tool | 1 | |
| ST931-250-625 | Standard tool | 1 | |
| ST931-375-875 | Standard tool | 1 | |
| ST931-625-1937 | Standard tool | 1 | |
| ST931D-250-625 | Standard tool | 1 | |
| ST932-750-1187-1-2 | Standard Tool | 1 | |
| ST932-750-1375-1-2 | STANDARD TOOL | 1 | |
| ST932-C-235 | Standard Tool | 1 | |
| ST932-C-297 | Standard Tool | 1 | |
| ST990-A | Standard tool | 1 | |
| ST991A-2-250 | STANDARD TOOL | 10 | |
| TOOLA01 | STANDARD TOOL | 1 | |
| USM25 | STANDARD TOOL | 1 | |
| WCI-A320-53-1378 Service Bulletin Kit | STANDARD TOOL | 1 | |
| WCI-A320-53-1379 Service Bulletin Kit | STANDARD TOOL | 1 | |
| WCIA 3205313791 | STANDARD TOOL | 2 | |
| WCIA3205313781 | STANDARD TOOL | 2 | |
| WCIA3205313791 | STANDARD TOOL | 2 | |
| WCIA320531381-1 | STANDARD TOOL | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98L29003002000 | TOOLSET TOOL SET,STANDARD TORQUE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HORIZONTAL STAB SLINGS | CALIBRATE AND RE-CERTIFY THIS TOOL (HORIZONTAL STAB SLINGS) IN ACCORDANCE WITH BOEING DWG C55007 REV. D (OR LATER) AND LOLER 1998 (OR LATER). TEST/CALIBRATION CERTIFICATE MUST REFERENCE MAINTENANCE DATA (MANUAL/STANDARD) AND REVISION USED. ADDITIONAL REFE | 1 | |
| 04-K380 | TELESCOPING DEBURR TOOLS ( TYPE: STANDARD ) | 1 | |
| 10-1-N | COLD WORKING TOOL STANDARD | 3 | |
| 1001790 | MECHANIC STANDARD TOOLBOX RED | 1 | |
| 1011144 | AVIONIC TOOLBOX STANDARD | 1 | |
| 1017294 | CABIN STANDARD TOOLBOX | 1 | |
| 102-3120 | STANDARD TOOLS TENSIOMETER | 1 | |
| 11-01-0097 | Hand Crimp Tool for 2.36mm Diameter, Standard .093" Pin and Socket Crimp Terminal, 22-24 AWG | 1 | |
| 12-1-N | COLD WORKING TOOL STANDARD | 3 | |
| 12-2-N | COLD WORKING TOOL STANDARD | 1 | |
| 12445-002-003 | TOOL, TEST SET, CALIBRATION STANDARD | 3 | |
| 12445-002-004 | TOOL-ULTRASONIC CALIBRATION STANDARD | 1 | |
| 13214A WT/LR | TOOL BOX STANDARD, STAHLWILLE | 4 | |
| 13214A/1WT/LR | TOOL BOX STANDARD | 1 | |
| 13216-4 | EASA STANDARD TOOL BOX, MAKE STAHLWILLE | 1 | |
| 16-1-N | COLD WORKING TOOL STANDARD | 1 | |
| 17M46 | STANDARD WINDOWS HANDLING TOOL | 1 | |
| 208857 | COLD WORKING TOOL STANDARD | 1 | |
| 249000 | TOOL, CALIBRATION STANDARD | 1 | |
| 2509100213 | STANDARD TOOLS FEELER GAGE | 1 | |
| 28-0-4225 | STANDARD TOOLS SPRING BALANCE | 1 | |
| 28-04225 | STANDARD TOOLS SPRING BALANCE | 1 | |
| 3008-550 | TOOL - SCREW REMOVAL (ALSO CALLED A "LESTER" TOOL) (USE WITH STANDARD 1/4" HEXAGON SCREW DRIVER BITS) (MAGNAVON INDUSTRIES INC) | 2 | |
| 348-3666 | KNIPEX VDO Standard tool set | 1 | |
| 35-92106-0001 | STANDARD TOOLS KIT | 1 | |
| 35-92133-0001 | ENGINE AND STRUCTURE STANDARD TOOL KIT | 1 | |
| 355A95-7500-00 | AIR HYDRAULIC TOOL KIT / HYDRAULIC ACCESSORY ASSEMBLY AS350 / AS355 STANDARD | 1 | |
| 4-1-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 1 | |
| 4-2-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 1 | |
| 4-3-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 2 | |
| 4-4-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 2 | |
| 416161 | SAFT STANDARD BATTERY MAINTENANCE TOOL KIT | 9 | |
| 46-051 | RIVET FAN SPACING TOOLS (STANDARD) | 1 | |
| 46-081 | Rivet Fan Spacing Tools (Type: Mini) (Number of fingers: 10) (Spacing range: 1/2 Closed to 2" Open) (Overall length (open): 18" (46 cm)) (Add to cart: Add To Cart) (Type: Standard) (Number of fingers: 20) (Spacing range: 1/2 Closed to 2" Open) (Overall le | 5 | |
| 5163A42 | WRENCH:COMBINATION STANDARD SET IN METRIC TOOLS - HAND / POWER :10 PIECE INCH WRENCH SET 1/4" - 3/4" ORDER PN 5163A43 FROM MCMASTER- CARR MANUFACTURER PART NUMBER (M) - 5163A42; MANUFACTURER (MA) - ARMSTRONG; VENDOR/SUPPLIER PART NUMBER (VN) - 5163A42 | 1 | |
| 5163A43 | WRENCH SET:COMBINATION TYPE:RATCHETING BOX SIZE:3/8 INCH - 3/4 INCH OPEN SIZE:3/8INCH - 3/4INCH STYLE:12- POINT MATL:CHROME PLATED NUMBER OF PIECES:10 PIECES CONT:PLASTIC WRENCH:COMBINATION STANDARD SET IN INCHES TOOLS - HAND / POWER :STANDARD SET IN INCH | 1 | |
| 531195T01R00 | TOOLKIT STANDARD-STRUCTURAL REPAIR | 1 | |
| 55-1987 | 16-26 AWG Ergo-Elite Stripmaster® Standard Tool | 3 | |
| 576714 | STANDARD STRAIGHT ACTION HAND CRIMP TOOL | 4 | |
| 6-0-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 5 | |
| 6-1-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 2 | |
| 6-2-N | COLD WORKING TOOL STANDARD | 3 | |
| 6-3-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 4 | |
| 6-3-NRIB6 | COLD WORKING TOOL STANDARD | 1 | |
| 600-058 | HAND BANDING TOOL - STANDARD CLAMPING BAND | 7 | |
| 62200-7400 | Tool Kit for Standard Manual Press FFC | 1 | |
| 63819-1300 | Hand Crimp Tool for Standard 1.57mm Pin and Socket Crimp Terminals, 18-24 AWG | 9 | |
| 63819-6800 | Hand Crimp Tool for Industry standard 1.78mm Terminals | 1 | |
| 63819-6900 | Hand Crimp Tool for Industry standard 1.78mm Tab Terminals, 24-26 AWG Wire | 1 | |
| 64003-7300 | Right Hand Crimp Tool for Female Non-Insulated Standard Quick Disconnects, 12-16 AWG Wire | 1 | |
| 6914V-SD | STANDARD SCRADER VALVE TOOL, TO REMOVE CORE OF PRESSURE TEST VALVE. | 1 | |
| 7552-4 | TOOL FOR INSTALLATION OF STANDARD HELI COIL INSERT IN THE PISTION HOUSING | 10 | |
| 7947479-10 | REFERENCE STANDARD ALUMINUM 7075-T6 MULTI-PURPOSE TESTING PHTOOLSP/N 7947479-10, NRK-3A (REFERENCE USAF TO-33B-1-1) | 3 | |
| 7947479-10-304 | PH TOOL REFERENCE STANDARD STAINLESS SPEC USAF TO 33-B-1-1 | 1 | |
| 7947479-10-T | PH TOOL REFERENCE STANDARD TITANIUM SPEC USAF TO 33-B-1-1 | 2 | |
| 8-0-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 2 | |
| 8-1-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 3 | |
| 8000CSA 12 1/2 X 3 | RIVETER/INSERTION TOOL, COMPLETE WITH FOOT CONTROL, HOSES, CONNECTORS, STANDARD ACCESSORIES GROUP AND HARDWARE. READY TO OPERATE. NOTE: DOES NOT INCLUDE PEDESTAL STAND. | 1 | |
| 8000CSA 12 1/2 x 3 | Riveter/Insertion tool, complete with foot control, hoses, connectors, standard accessories group and hardware. Ready to operate. NOTE: Does NOT include pedestal stand. | 1 | |
| 8000CSA 24 1/2 x 3 | Riveter/Insertion tool, complete with foot control, hoses, connectors, standard accessories group and hardware. Ready to operate. NOTE: Does NOT include pedestal stand. | 1 | |
| 8000CSA 9 1/2 x 3 | Riveter/Insertion tool, complete with foot control, hoses, connectors, standard accessories group and hardware. Ready to operate. NOTE: Does NOT include pedestal stand. | 1 | |
| 81091004 | EASA STANDARD TOOL BOX | 1 | |
| 8818471000 | STANDARD TOOL CASE | 1 | |
| 895-3900-06-101 | BOX ELECTROAVIONIC, STANDARD TOOLS | 1 | |
| 9300GSBFMUYO | MECHANIC STANDARD TOOL | 1 | |
| 95-92134-0001 | ELECTRIC AND/OR ELECTRONIC STANDARD TOOL KIT | 1 | |
| 968RB | DEFLATOR - TIRE, VALVE CORE R & I AND TIRE DEFLATION, STANDARD/SMALL BORE (*SAFETY*) (SAFE-COR TOOLS) | 13 | |
| 98814905 | TOOL BOX STANDARD, STAHLWILLE | 2 | |
| 98814935 | TOOL BOX STANDARD | 1 | |
| 98A54003098000 | NDT REF STANDARD BLOCK TOOL | 1 | |
| 98A57103013000 | TAP TEST TOOL REF STANDARD | 20 | |
| 98A57103016001 | A300 NDT REF STANDARD TOOL | 2 | |
| 98F29003000000 | STANDARD TORQUE TOOL SET | 15 | |
| 98F32401001000 | TOOL-R I WHEELS OR STANDARD WHEEL R AND I DOLLY | 14 | |
| 98F71203010000 | STANDARD TOOL FCD FLAG | 5 | |
| 98L29003002000 | TOOL SET,STANDARD TORQUE | 6 | |
| 98S53005014-006 | STANDARD CALIBRATION TOOL | 1 | |
| 98S53005014006 | STANDARD CALIBRATION TOOL | 1 | |
| 98S53805002000 | CALIBRATION STANDARD TOOL | 6 | |
| 98S57105010201 | CALIBRATION TOOL STANDARD NDT | 1 | |
| 98S57105013004 | CALIBRATION TOOL STANDARD NDT | 1 | |
| 98S57105014001 | CALIBRATION TOOL STANDARD NDT | 2 | |
| 98S57105014002 | CALIBRATION TOOL STANDARD NDT | 2 | |
| 98S57105014003 | CALIBRATION TOOL STANDARD NDT | 2 | |
| 98S57105019000 | CALIBRATION TOOL STANDARD NDT | 1 | |
| 99A53803024000 | NDT REF STANDARD TOOL | 1 | |
| 99A5440302000 | NDT REF STANDARD BLOCK TOOL | 1 | |
| 99A55407291000 | TOOL TEST FUNCTION STANDARD | 5 | |
| 99A57103030000 | A300 NDT REF STANDARD TOOL | 4 | |
| 99A57103041000 | NDT REFERENCE STANDARD TOOL | 3 | |
| 99A57103042000 | NDT REFERENCE STANDARD TOOL | 2 | |
| 99A57103043000 | NDT REFERENCE STANDARD TOOL | 2 | |
| 99A571043001 | NDT REF STANDARD TOOL | 1 | |
| 99A57204420000 | CALIBRATION STANDARD TOOL | 1 | |
| 99D54403004000 | NDT REF STANDARD TOOL | 6 | |
| 99F53303086000 | TOOL- REFERENCE STANDARD | 5 | |
| 99F53303087000 | TOOL REFERENCE STANDARD | 4 | |
| A20006-32 | STANDARD TOOL - INSTALLATION TOOL, GROMMET, NAS1368 | 15 | |
| A30199 | MECHANICAL PLIERS. THIS TOOL IS USED FOR ELECTRICAL STANDARD PRACTICES. | 8 | |
| A32091-0781 | STANDARD TOOL HOLE SAW | 1 | |
| A330-92200-0001 | STANDARD TOOL BENCH - A | 1 | |
| A330-92210-0001 | STANDARD TOOL BENCH - B | 1 | |
| A40199 | HAND BANDING TOOL - STANDARD CLAMPING BAND | 6 | |
| A40199 | BAND-IT A40199 TIE-DEX II TOOL FOR STANDARD SIZE BANDS | 6 | |
| AF8 | M22520/1-01 Standard Adjustable Indent Crimp Tool | 14 | |
| AF8-CC | Standard Adjustable Indent Crimp Tool with CYCLE COUNTER | 2 | |
| AFK-SS | PH TOOL REFERENCE STANDARD STAINLESS SPEC USAF TO 33-B-1-1 | 1 | |
| AFS-1202L | STANDARD TOOL - BUCKING BAR | 1 | |
| AJD070505-CS | CUTTING TOOL - STANDARD 9507M23 BEARING (AJD070505-CS) | 1 | |
| AJD070505-SS | SWAGING TOOL - STANDARD 9507M23 BEARING (AJD070505-SS) | 1 | |
| AJD070605-CS | CUTTING TOOL - STANDARD 2122M92 BEARING (AJD070605-CS) | 1 | |
| AJD070605-SS | SWAGING TOOL - STANDARD 2122M92 BEARING (AJD070605-SS) | 1 | |
| ATR42V100A | ATR 42&72 DIGITAL AIR/HYDRAULIC TOOL KIT (Standard MILH5606) | 5 | |
| AW1020DK | WRENCH SET, AW1020DK, 20/PC, TOOLS, HAND, TYPE, TOOL WRENCH SET, TYPE HEXAGONAL, STANDARD SAE | 3 | |
| AZL01980-R00 | STANDARD AVIONICS HANGAR TOOLBOX | 1 | |
| BB73-482 | RVSM STANDARD TOOL CASE | 1 | |
| BST2960-1 | STANDARD TOOLS CLINOMITER | 1 | |
| CAM-100-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-101-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-102-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-103-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-110-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-111-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-20-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-21-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-22-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-23-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-30-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-31-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-32-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-33-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-40-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-41-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-42-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-43-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-50-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-51-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-52-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-53-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-60-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-61-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-62-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-63-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-70-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-71-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-72-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-73-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-80-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-81-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-82-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-83-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-90-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-91-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-92-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-93-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAR-102-1-XXXX | Gage Finish Reamer - Standard CA Tooling | 1 | |
| CAR-111-1-XXXX | Gage Finish Reamer - Standard CA Tooling | 1 | |
| CAR-70-1-*XXXX | Gage Finish Reamer - Standard CA Tooling | 1 | |
| CBG-4-1-N-1 | COMBINATION GAGE FOR STANDARD TOOL DIAMETER NUMBER (STDN) 4-1-N | 1 | |
| CBM-18-0-N-2-60-V1 | Mandrel - Standard CB Tooling | 3 | |
| CBM-18-1-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-18-2-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-18-3-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-20-0-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-20-1-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-20-2-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-20-3-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-22-0-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-22-1-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-22-2-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-22-3-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-24-0-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-24-1-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-24-2-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-24-3-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-26-0-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-26-1-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-26-2-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-26-3-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-28-0-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-28-1-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-28-2-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-28-3-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-30-0-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-30-1-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-30-2-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-30-3-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBMG-4-1-N | MANDREL GAGE FOR STANDARD TOOL DIAMETER NUMBER (STDN) 4-1-N | 1 | |
| CBSD-12-3-N-1 | STANDARD TOOL DIAMETER NUMBER | 2 | |
| CBSD-4-1-N-1 | STARTING DRILL FOR STANDARD TOOL DIAMETER NUMBER (STDN) 4-1-N | 1 | |
| CBSR-4-1-N-1 | STARTING REAMER FOR STANDARD TOOL DIAMETER NUMBER (STDN) 4-1-N | 1 | |
| CRFG-R30-1-XXXX/YYYY | Final Hole Gage - Standard CR Tooling | 1 | |
| CRM-R30-1-30-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R32-1-30-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R40-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R42-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R50-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R52-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R60-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R62-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| DAT06AETA1000 | AXIAL STANDARD CRIMPING TOOL | 1 | |
| DAT06AETA4000 | AXIAL STANDARD CRIMPING TOOL | 1 | |
| DAT06AETA5000 | AXIAL STANDARD CRIMPING TOOL | 1 | |
| DBS-1100-32 | Tension Adjustment Key for use with .250 standard width Band Tools | 1 | |
| DBS-2100 | HAND BANDING TOOL - STANDARD CLAMPING BAND | 5 | |
| DMC1264 | KIT, CRIMP TOOL - ELECTRICAL CONNECTOR REF FOUND IN STANDARD WIRE PRACTICES MANUAL (SWPM). (DANIELS MANUFACTURING CORPORATION) | 6 | |
| DSE-100X | STANDARD TOOL,DIGIT | 1 | |
| EC-AF-NRK-3A | CTS-PH-TOOL, CONFIRM FROM NDT FOR STANDARD | 1 | |
| EC-AF-NRK-3AL | CTS-PH-TOOL, CONFIRM FROM NDT FOR STANDARD | 1 | |
| EC-AF-NRK-3S | CTS- PH-TOOL,CONFIRM FROM NDT FOR STANDARD | 1 | |
| EC-AF-NRK-Case | CASE FOR EDDY CURRENT STANDARD TOOL | 1 | |
| EKA330533226-3 | STANDARD TOOL TOOLD07 | 1 | |
| G01J3P3 | KIT, CRIMP TOOL - ELECTRICAL CONNECTOR REF FOUND IN STANDARD WIRE PRACTICES MANUAL (SWPM) (GRAPHIC DATAKITS INTERNATIONAL (6495 CORP.)) | 1 | |
| GS4MT | TOOL - INSTALLATION - HAND OPERATED - INSTALLS STANDARD .18", LIGHT-HEAVY .25", AND HEAVY .31" CROSS SECTION TIES | 7 | |
| GSB5500001 | REFERENCE STANDARD NDT TOOL | 1 | |
| HER-097 | TOOLBOX AVIATION STANDARD | 1 | |
| HH-60W | STANDARD EXPEDITIONARY TOOL KIT | 1 | |
| HORIZONTAL STAB SLINGS | CALIBRATE AND RE-CERTIFY THIS TOOL (HORIZONTAL STAB SLINGS) IN ACCORDANCE WITH BOEING DWG C55007 REV. D (OR LATER) AND LOLER 1998 (OR LATER). TEST/CALIBRATION CERTIFICATE MUST REFERENCE MAINTENANCE DATA (MANUAL/STANDARD) AND REVISION USED. ADDITIONAL REFE | 1 | |
| IDCT4101 | RETENTION GROOVE CUTTING TOOL STANDARD, 1/2 AND FI | 1 | |
| IPCT4101-12 | RETENTION GROOVE CUTTING TOOL STANDARD, 1/2 AND FIRST OVERSIZE | 2 | |
| J71063-1 | STANDARD TOOL - COWL LATCHING ASSEMBLY, ENGINE COW | 3 | |
| K12003-1 | FILL TOOL - HYDRAULIC STRUT, SEMI LEVER GEAR STANDARD PRACTICES - AIRFRAME | 4 | |
| KIT BOX | CASE FOR EDDY CURRENT STANDARD TOOL | 1 | |
| MG0010G00131 | BOX ELECTROAVIONIC, STANDARD TOOLS | 1 | |
| NDT3237-.040/.010 | TOOL BOEING STANDARD | 1 | |
| NDT3237-050-015 | TOOL BOEING STANDARD | 1 | |
| NDT3237-130-020 | TOOL BOEING STANDARD | 1 | |
| NDT3271 | REFERENCE STANDARD NDT TOOL | 2 | |
| NDT3276A | REFERENCE STANDARD NDT TOOL | 2 | |
| NDT4244 | TOOLS-REFERENCE STANDARD FOR NDT | 3 | |
| NDT667 | NDI STANDARD, TOOLING | 4 | |
| NDT674 | NDI STANDARD, TOOLING | 3 | |
| NRK-3A | CTS-PH-TOOL, CONFIRM FROM NDT FOR STANDARD | 1 | |
| NRK-3AL | CTS-PH-TOOL, CONFIRM FROM NDT FOR STANDARD | 2 | |
| NRK-3S | CTS- PH-TOOL,CONFIRM FROM NDT FOR STANDARD | 1 | |
| NRK-3ST | CTS- PH-TOOL,CONFIRM FROM NDT FOR STANDARD | 1 | |
| NRK-CASE | CASE FOR EDDY CURRENT STANDARD TOOL | 1 | |
| NRK−3S | CTS- PH-TOOL,CONFIRM FROM NDT FOR STANDARD | 1 | |
| OEX64A | TOOLING / WRENCH, COMBINATION, STANDARD LENGTH, 2, 12-POINT | 2 | |
| PWA 75947 | NDI TOOL MASTER STANDARD | 1 | |
| RBI8000T | HELIBOX TROLLEY CASE WITH TOOLS – IMPERIAL (SAE / STANDARD)/METRIC KIT, INCLUDES 236 TOOLS | 1 | |
| RBI9400T | MECHANIC HAND TROLLEY CASE WITH TOOLS – IMPERIAL (SAE / STANDARD) KIT (161 TOOLS) | 1 | |
| RBI9600T | AVIONICS TOOLKIT – 262 PIECE SET – IMPERIAL (SAE / STANDARD) | 1 | |
| RBI9650TM | AVIONICS TOOL KIT– INCLUDES 266 IMPERIAL (SAE / STANDARD)/DMC TOOLS | 1 | |
| RKC4101-12 | RETENTION GROOVE CUTTING TOOL STANDARD, 1/2 AND FI | 3 | |
| RKC4101−12 | RETENTION GROOVE CUTTING TOOL STANDARD, 1/2 AND FIRST OVERSIZE | 3 | |
| RKC7135 | RETENTION GROOVE CUTTING TOOLS STANDARD AND FIRST OVERSIZE | 1 | |
| RKC7155 | RETENTION GROOVE CUTTING TOOLS STANDARD AND FIRST OVERSIZE | 1 | |
| RRT048964 | ASSEMBLY TOOL (FOR SB 72-G262 STANDARD QUILL SHAFT) | 1 | |
| RSAF-304 | PH TOOL REFERENCE STANDARD STAINLESS SPEC USAF TO 33-B-1-1 | 1 | |
| RSAF-T6AL4V | PH TOOL REFERENCE STANDARD TITANIUM SPEC USAF TO 33-B-1-1 | 1 | |
| RST1016 | ROLLER STAKING TOOLS STANDARD, 1/2 AND FIRST OVERSIZE | 2 | |
| RST2200 | ROLLER STAKING TOOLS STANDARD & FIRST OVERSIZE | 1 | |
| RST4265 | ROLLER STAKING TOOLS STANDARD & FIRST OVERSIZE | 1 | |
| SB095184-7 | TOOL, STANDARD | 1 | |
| SK601R-10042-1 | TOOL, CALIBRATION STANDARD | 1 | |
| SK601R-30039 | ULTRASONIC REF STANDARD TOOL | 2 | |
| SMO415431 | STARTING SKID STANDARD ASSEMBLY/REMOVAL TOOL (BAKER HUGHES) | 1 | |
| ST | STANDARD TOOL CUTTER - SCOTCHCAL MARKING MATERIAL | 1 | |
| ST10-907-H | STANDARD TOOL - CARBIDE TIPPED DRILL | 1 | |
| ST10-907H | STANDARD TOOL - CARBIDE TIPPED DRILL | 1 | |
| ST1000-A-8252 | Standard Tool - Bucking Bar | 1 | |
| ST1000-A-8252-1 | Standard tool-bucking bar | 3 | |
| ST1000-A-8252-2 | Standard tool-bucking bar | 3 | |
| ST1000-A-8252-3 | Standard tool-bucking bar | 3 | |
| ST1000-A-8252-4 | Standard tool-bucking bar | 3 | |
| ST1000-A-8252-5 | Standard tool-bucking bar | 3 | |
| ST1060-20 | Standard Tool - Decompression Fork | 1 | |
| ST1065C | Standard Tool - Installation Tool, Grommet, NAS1368 | 6 | |
| ST1065C-10-1 | Standard Tool - Installation Tool Grommet | 1 | |
| ST1065C-6-1 | Standard Tool - Installation Tool Grommet | 1 | |
| ST1066-22 | STANDARD TOOL SEAL RETAINER ADJUSTMENT TOOL | 1 | |
| ST1066-24 | STANDARD TOOL-ASSEMBLY AID,GAP COVER SEAL 737 HORIZ STAB | 1 | |
| ST1066-26 | STANDARD TOOL - SEAL INSTALLATION TOOL | 1 | |
| ST1066-27 | STANDARD TOOL - SEAL INSTALLATION TOOL | 1 | |
| ST1066-7 | STANDARD TOOL-INSTALLATION TOOL DOOR BULB SEAL | 2 | |
| ST1066RB | Standard Tool - Release Key For Pivot Bin Snubber, "Boeing Sky" Interior | 3 | |
| ST1066RB-1 | Standard Tool - Release Key | 3 | |
| ST1069D | STANDARD TOOL GROMMET SET FOR INSTALLATION OF BAC-G20L | 1 | |
| ST1069D-249 | Standard tool grommet set for installation of BAC-G20L | 1 | |
| ST1069D-374 | Standard tool grommet set for installation of BAC-G20L | 1 | |
| ST1069D-431 | Standard tool grommet set for installation of BAC-G20L | 1 | |
| ST1157G | Standard tool rivet die，BACR15GA TI-CB t.e | 1 | |
| ST1212E | STANDARD TOOL - HOLE SAW | 1 | |
| ST1212E-1.5625 | STANDARD TOOL, HOLE SAW | 1 | |
| ST1212E-12500 | STANDARD TOOL -HOLE SAW | 1 | |
| ST1212E-1930 | Standard Tool Holesaw 1.930" Dia | 1 | |
| ST1212E-2988 | STANDARD TOOL HOLE SAW | 1 | |
| ST1212E-625 | HOLE SAW-STANDARD TOOL | 1 | |
| ST1212E-653 | Standard Tool Holesaw .653" Dia | 1 | |
| ST1212E-687 | Standard Tool Holesaw .687" Dia | 1 | |
| ST1212E-781 | Standard Tool Hole Saw .781" Dia | 1 | |
| ST1212E-812 | Standard Tool Hole Saw .8125" Dia | 1 | |
| ST1219Y-3RCA-3856-374-6-2-H-1 | STANDARD TOOL, REAMER | 1 | |
| ST1219Y3RCA3856-374-6-2H1 | STANDARD TOOL, REAMER | 1 | |
| ST1241BAC | STANDARD TOOL DRILL - THREADED SHANK FOR ANGLE MOTOR | 1 | |
| ST1257B | STANDARD TOOL - DRILL (CARBIDE), 4 FLUTES | 1 | |
| ST1257B-1250-300-1 | DRILL, STANDARD TOOL | 1 | |
| ST1257B1900-600-1 | 4 FLUTE SOLID CARBIDE STRAIGHT REAMER "DREAMER" UNDER BOEING STANDARD TOOL P/N: ST1257B SIZE: STRAIGHT SHANK, DIAMETER 0.190" LENGTH 6" | 1 | |
| ST13022B | TROLLEY MECHANICAL, STANDARD TOOLS | 1 | |
| ST1742C | Standard tool window seal installation | 1 | |
| ST1742C-A | STANDARD TOOL - WINDOW SEAL INSTALLATION | 2 | |
| ST1742C-A-1 | Standard Tool - Window Seal Installation | 1 | |
| ST1742F | STANDARD TOOL - 787 WINDOW INSTALL AND REMOVAL TOOL | 5 | |
| ST1742F-1 | STANDARD TOOL-787 WINDOW REM/I | 8 | |
| ST1813E | STANDARD TOOL - MISCELLANEOUS SCREWDRIVER BITS | 1 | |
| ST1813E-2 | Standard tool-misc.screwdriver bits | 3 | |
| ST1864P | Standard Tool Reamer - Carbide, Straight Flute, Piloted | 1 | |
| ST1864R | STANDARD TOOL - REAMER, CARBIDE, MULTI-STEP, STRAIGHT FLUTE | 1 | |
| ST1874R | PILOTED STEP REAMER UNDER BOEING STANDARD TOOL P/N: ST1874R SIZE: DIAMETERS 0.190" X 0.158" X 0.126", LENGTH 6" | 1 | |
| ST1876EA | STANDARD TOOL - BIN BUCKET QUICK RELEASE | 1 | |
| ST1876EA-1 | STANDARD TOOL - BIN BUCKET QUI | 4 | |
| ST2575A | Standard Tool - Torque Adapter | 5 | |
| ST2575C | STANDARD TOOL - FENWAL CONNECTORS, SLEEVE AND PIN PRESS TOOL, BAC5162-64 | 1 | |
| ST258/0-334C-1-185 | STANDARD TOOL - SPANNER NOSE PLIERS | 12 | |
| ST2580-1 | STANDARD TOOL - SPANNER NOSE PLIERS | 1 | |
| ST2580-104PA-12-61-.25 | Standard tool-deep socket variable | 2 | |
| ST2580-104PA-12-61-_25 | STANDARD TOOL-DEEP SOCKET VARIABLE | 2 | |
| ST2580-145 | STANDARD TOOL - SPANNER NOSE PLIERS | 1 | |
| ST2580-153 | Standard Tool - Spanner Wrench | 3 | |
| ST2580-185 | STANDARD TOOL - SPANNER NOSE PLIERS | 5 | |
| ST2580-251 | STANDARD TOOL - TORQUE WRENCH ADAPTER, 0.375 SLOT - 5-INCH OUTSIDE DIAMETER | 10 | |
| ST2580-267 | STANDARD TOOL - SPANNER WRENCH ADAPTER FOR BACN10RF NUTS | 15 | |
| ST2580-267-10 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-10-3-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-10-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-12-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-14-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-16-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-18-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-19-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-20 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-20-3-5-F | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-20-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-201-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-21-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-210-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-22-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-228-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-24-3-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 2 | |
| ST2580-267-24-4-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24-4-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-242-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-245-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-26-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-26-4-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-28 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-28-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-29-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-32 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-32-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-36-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-40-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-48-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-60-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-285-8 | STANDARD TOOL-SPANNER WRENCH,FACE TYPE | 1 | |
| ST2580-286-3A | STANDARD TOOL-SPANNER WRENCH-224NUT AND RACE ENDS | 1 | |
| ST2580-286-8 | STANDARD TOOL - SPANNER WRENCH, FACE TYPE | 6 | |
| ST2580-286-8-K | Standard tool spanner wrench，face type | 1 | |
| ST2580-334 | Standard Tool-Spanner Nose Pliers | 1 | |
| ST2580-334C | STANDARD TOOL - SPANNER NOSE PLIERS | 3 | |
| ST2580-334C-1 | STANDARD TOOL - SPANNER NOSE PLIERS | 1 | |
| ST2580-334C-1-145 | Standard Tool - Spanner Nose Pliers | 13 | |
| ST2580-334C-1-145 -185 | Standard Tool -Spanner Nose Pliers | 1 | |
| ST2580-334C-1-185 | Standard Tool - Spanner Nose Pliers | 12 | |
| ST2580-334C-1-185 -1-145 | Standard Tool -Spanner Nose Pliers | 1 | |
| ST2580-381A | Standard tool-spanner wrench | 2 | |
| ST2580-436B | STANDARD TOOL TORQUE WRENCH BOX END FOR BACC63CP ELECTROCAL CONNECTOR | 1 | |
| ST2580-469-2-12-20 | Standard tool-wrench offset box end | 1 | |
| ST2580-469-2-12-20-B | Standard Tool - Wrench Offset Box End | 2 | |
| ST2580-469-2-24-40B | Standard tool-wrench offset box end | 1 | |
| ST2583-13 | STANDARD TOOL-WRENCH SPLINE DRIVE | 2 | |
| ST2587D | STANDARD TOOL-COTTER PIN INSERTION AND BENDING TOOL | 1 | |
| ST2589A | Standard tool-pliers cannon connectors bacc45 ft | 1 | |
| ST2598C | STANDARD TOOL - HOLDER TOOL FOR WALTER KIDDE ELECTRICAL CONNECTOR | 2 | |
| ST2598C-1 | Standard tool-holder tool for walter kidde electrical connector | 5 | |
| ST2598C-201 | Standard Tool - Holder Tool For Walter Kidde | 3 | |
| ST2613A | STANDARD TOOL-ASSEMBLY TOOLS,737 SLAT DOWNSTOP | 1 | |
| ST2850-334C | STANDARD TOOL - SPANNER NOSE PLIERS | 1 | |
| ST600-281 | STANDARD TOOL-VENTURI VENT | 1 | |
| ST6760 | STANDARD TOOL - ULTRASONIC LEAK PROBE TOOL | 1 | |
| ST6760A | STANDARD TOOL - ULTRASONIC LEAK PROBE TOOL | 2 | |
| ST7217J | STANDARD TOOL - ALIGNMENT PIN WITH WARNING STREAMER | 1 | |
| ST732 | Standard Tool Cutter - Scotchcal Marking Material | 1 | |
| ST732-190 | STANDARD TOOL CUTTER - SCOTCHCAL MARKING MATERIAL | 2 | |
| ST732-250 | STANDARD TOOL CUTTER - SCOTCHCAL MARKING MATERIAL | 1 | |
| ST732-312 | STANDARD TOOL CUTTER - SCOTCHCAL MARKING MATERIAL | 1 | |
| ST732-3121 | STANDARD TOOL CUTTER - SCOTCHCAL MARKING MATERIAL | 1 | |
| ST848 | Standard tool-installation tool "O" rings | 15 | |
| ST8709H | Standard Tool - Go No Go Gauge | 6 | |
| ST8709H-1 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 8 | |
| ST8709H-1 -2 -3 -4 -5 -6 -7 | Standard Tool -Go/No-Go Gauge. For Assembly Of Wiggins Bacc42R Coupling | 1 | |
| ST8709H-2 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-3 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-4 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 8 | |
| ST8709H-5 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-6 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-7 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 6 | |
| ST8709H-KIT | STANDARD TOOL - GO-NO-GO GAGE | 2 | |
| ST8709H-X | Standard Tool - G0 No Go Gauge | 2 | |
| ST8711J | STANDARD TOOL - GAUGE PROTRUSION, HEX DRIVE BOLT WITH LOCKBOLT COLLARS | 1 | |
| ST8711J-6 | Standard Tool - Gage Protrusion, Hex Drive Bolt | 1 | |
| ST8744 | Standard tool leak tracking inb'd wing assy | 2 | |
| ST8783-6 | STANDARD TOOL - ASSEMBLY, PROOF LOAD TEST EQUIPMENT, BACB10FB08GC BEARING INSTALLATION | 1 | |
| ST8783F | STANDARD TOOL - BEARING RETENTION PROOF TEST | 1 | |
| ST8783F-0625-035-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-0687-033-16 | Standard tool bearing retention proof test | 1 | |
| ST8783F-0688-033-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-0750-039-16 | Standard tool bearing retention proof test | 1 | |
| ST8783F-0781-039-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-0906-045-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-0969-054-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-1-1437-075 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-1563-084 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-1912-111 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-2065-111 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-2360-134 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1010-063-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1094-058-1 | Standard tool bearing retention proof test | 3 | |
| ST8783F-1218-068-1 | Standard tool bearing retention proof test | 2 | |
| ST8783F-1437-075-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1750-075-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1874-140-1 | Standard Tool-Bearing Retention Proof Test | 1 | |
| ST8783F-1899-140-1 | Standard Tool-Bearing Retention Proof Test | 1 | |
| ST8783F-1912-111-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1938-140-1 | Standard Tool-Bearing Retention Proof Test | 1 | |
| ST8783F-2360-134-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-2500-423-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-3000-150-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-812-437-16 | Standard tool bearing retention proof test | 1 | |
| ST878D | Standard Tool - Sleeveset for Presetting BACS13AP Flareless Tube Fittings | 8 | |
| ST918A | STANDARD TOOL MANDREL-BEARING-PRESSING BACB10A | 4 | |
| ST918A-1000-1750 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-1000-1875 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1000-1912 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1000-2500 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1180-2064 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1250-2360 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1375-2250 | Standard Tool - Mandrel, Bearing Pressing | 1 | |
| ST918A-1375-2562 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-2572 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-2582 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-2856 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-3500 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1378-2440 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1500-2812 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1500-3125 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1625-2964 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1750-3339 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1771-2952 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-190-625 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-190-777 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-2125-3592 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-605 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-625 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-250-656 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-687 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-250-689 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-250-750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-901 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-2500-3937 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-688 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-689 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-3000-5000 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-312-1250 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-312-750 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-312-781 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-312-783 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-312-812 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-375-1500 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-375-500 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-375-875 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-375-876 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-375-906 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-437-906 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-500-1000 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-500-1065 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1094 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1095 | STANDARD TOOL MANDREL, BEARING, PRESSING BACB10A | 1 | |
| ST918A-500-1687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-562-1187 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-562-1188 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-625-1125 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-625-1187 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-625-1687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1437 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-750-1625 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1937 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918B-3-500-1687 | Standard tool mandrel bearing pressing BACB10B | 1 | |
| ST918C-250-901 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-312-1250 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-500-1625 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-625-1375 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-625-1937 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918D-750-1250-620 | Standard tool mandrel-bearing pressing BAC-B10D | 1 | |
| ST919 | STANDARD TOOL SUPPORT BEARING INSTALL | 3 | |
| ST919-1250 | Standard tool support bearing install | 3 | |
| ST919-1750 | Standard tool support bearing install | 1 | |
| ST919-1937 | Standard tool support bearing install | 1 | |
| ST919-625 | Standard tool support bearing install | 1 | |
| ST919-812 | Standard tool support bearing install | 1 | |
| ST919-875 | Standard tool support bearing install | 1 | |
| ST919-901 | Standard tool support bearing install | 3 | |
| ST920 | Standard tool mandrel nas press fit bushing installation tool | 1 | |
| ST921MA-4-8-22-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-4-28-ALL-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-5-31-ALL-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-6-33-ALL-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-8-22-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-9-22-ALL | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MB | STANDARD TOOL - STRAIGHT SLEEVE | 1 | |
| ST922C-4 | Standard tool staking tool 1/4" bushing BACB28B-4 | 1 | |
| ST922C-5 | Standard tool staking tool 5/16 bushing BACB28B-5 | 2 | |
| ST922C-6 | Standard tool staking tool 3/8" bushing BACB28B-6 | 2 | |
| ST925-1771-2952 | Standard tool point staking tool bearing retention | 3 | |
| ST925-250-750 | Standard tool point staking tool bearing retention | 2 | |
| ST925-250-901 | Standard tool point staking tool bearing retention | 3 | |
| ST925-625-1062 | Standard tool point staking tool bearing retention | 1 | |
| ST926B-601B | Standard tool roller staking tool-portable hand operated | 1 | |
| ST926C-1375-2250-2127 | Standard Tool - Roller Staking Tool | 2 | |
| ST926C-500-1218-1093 | Standard tool roller staking tool | 2 | |
| ST926C-750-1937-1809 | Standard tool roller staking tool | 1 | |
| ST926G | STANDARD TOOL - BEARING REMOVE/INSTALL/SWAGE, BEARING WITH GROOVE 0.500 TO 1.250-INCH RACE SWAGE (TYPE III) | 1 | |
| ST926G-1.75-.750-1.000-1.625 | BEARING REMOVE / INSTALL / SWAGE STANDARD TOOL | 1 | |
| ST926G-2125-750-12.5-2000 | Bearing R/I Swage, Standard Tool | 1 | |
| ST927AA-1 | STANDARD TOOL - BACB10CN3 BEARING REMOVAL TOOL | 1 | |
| ST927AA-2 | STANDARD TOOL - BACB10AG4MC BEARING REMOVAL TOOL | 1 | |
| ST927C | STANDARD TOOL - BEARING REMOVAL TOOL | 4 | |
| ST927C-10 | Standard tool-bearing removal tool | 5 | |
| ST927C-108 | Standard tool-bearing removal tool | 1 | |
| ST927C-11 | Standard tool-bearing removal tool | 4 | |
| ST927C-114 | Standard Tool - Bearing removal | 1 | |
| ST927C-136 | Standard tool-bearing removal tool | 4 | |
| ST927C-139 | Standard tool-bearing removal tool | 5 | |
| ST927C-142 | Standard tool-bearing removal tool | 4 | |
| ST927C-20 | Standard tool-bearing removal tool | 1 | |
| ST927C-5 | Standard tool-bearing removal tool | 5 | |
| ST927C-81 | Standard tool-bearing removal tool | 4 | |
| ST927J | STANDARD TOOL - HOLE SAW, BEARING REMOVAL | 1 | |
| ST928 | STANDARD TOOL - ROLLER STAKING TOOL, ALUMINUM SLEEVE | 1 | |
| ST928-A | STANDARD TOOL - ROLLER SWAGING, ALUMINUM SLEEVE 69-38919 | 1 | |
| ST928D | Standard tool-roller swage，bearing sleeve | 1 | |
| ST928G | STANDARD TOOL - ROLLER SWAGING ACCESSORIES FOR ST928 | 1 | |
| ST928H | STANDARD TOOL - BEARING REMOVE/INSTALL/SWAGE, SLEEVE OUTSIDE DIAMETER 1.33 THRU 2.25-INCH SLEEVE TYPE | 1 | |
| ST929-1A | STANDARD TOOL - ROLLER SWAGING SLEEVE BEARING | 1 | |
| ST929-1A-1250-2000 | Standard tool-roller swage sleeve bearing | 1 | |
| ST929-1A-250-901 | Standard tool-roller swage sleeve bearing | 1 | |
| ST929-2A | STANDARD TOOL.BEARING SLEEVE.STAKING TOOL 3 POIINT | 1 | |
| ST929-2A-2000-1250 | Standard tool bearing sleeve staking tool 3 point | 1 | |
| ST929-2A-3500-1375 | Standard tool bearing sleeve staking tool 3 point | 1 | |
| ST929-2A-4800-2500 | Standard tool bearing sleeve staking tool 3 point | 1 | |
| ST929-2A-5000-3000 | Standard tool bearing sleeve staking tool 3 point | 1 | |
| ST929-2C | STANDARD TOOL STAKING TOOL BEAKING SLEEVE.6 POINT. | 1 | |
| ST929H | STANDARD TOOL-BEARING REMOVAL/INSTALL/SWAGE.SLEEVE | 1 | |
| ST930-LT-375-906-801 | Standard tool load test-bearing BAC 5435 | 1 | |
| ST930C | STANDARD TOOL - ANVIL SWAGING TOOL | 1 | |
| ST930C-250-656-1 | Standard tool-anvil swaging tool | 4 | |
| ST930C-250-687-1 | Standard tool-anvil swaging tool | 3 | |
| ST930C-250-688-1 | Standard tool-anvil swaging tool | 1 | |
| ST930C-250-689-1 | Standard tool-anvil swaging tool | 2 | |
| ST930C-375-687-Ⅲ | STANDARD TOOL-ANVIL SWAGING TOOL | 1 | |
| ST931 | STANDARD TOOL - BALL POINT MULTIPLE - BEARING STAKING TOOL | 1 | |
| ST931-190-500 | Standard tool,ball point multiple-bearing starking tool | 1 | |
| ST931-250-750 | Standard tool,ball point multiple-bearing starking tool | 2 | |
| ST932-750-1375-1-2 | 0-1375-1-2 L STANDARD TOOL | 1 | |
| ST933-2250-1250 | Standard tool swagong tool housing bearing ring lock | 1 | |
| ST937D-1 | STANDARD TOOL - ANVIL SWAGE NACELLE SUPPORT FITTINGS | 1 | |
| ST9501B | STANDARD TOOL -0 ALIGNMENT PIN | 2 | |
| ST9503-1 | Standard Tool - Universal Flap Peen Tool Kit | 1 | |
| ST982L-9 | Standard tool-scraper：sealant not for use on clad aluminum | 5 | |
| ST982LF-9 | Standard tool-scraper：sealant not for use on clad aluminum | 4 | |
| ST991A | Standard tool-wedge seal installation | 5 | |
| ST991A-2 | STANDARD TOOL - REMOVAL TOOL, SCRIVET FASTENER | 9 | |
| ST991A-2-250 | STANDARD TOOL - REMOVAL TOOL，SCRIVET FASTENERS AND BACB31 SLEEVE BOLTS | 10 | |
| ST991A-2-312 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 4 | |
| ST991A-2-375 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-438 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-500 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-563 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-625 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-750 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-875 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991NB-1 | Standard tool-spreader，sealant application | 2 | |
| ST9999-VBA-201 | Standard tool-vacuum generator multiple venturi | 3 | |
| ST9999-VBA-301 | STANDARD TOOL VACUUM | 1 | |
| ST9999ART | Standard tool-aerostrip removal tool | 3 | |
| ST9999CL | STANDARD TOOL COWL LATCHING | 3 | |
| ST9999CL-1 | Standard Tool, Cowl Latching Assy | 1 | |
| ST9999CL-201 | STANDARD TOOL - COWL LATCHING ASSEMBLY, ENGINE COWL FAN | 5 | |
| STI3022 | BOX MECHANICAL STANDARD TOOLS | 1 | |
| STI3022B | BOX MECHANICAL, STANDARD TOOLS (SNAP-ON) | 1 | |
| STI3217 | STANDARD TOOLS (SNAP-ON) BOX MECHANICAL | 1 | |
| STI3218 | STANDARD TOOLS BOX ELECTROAVIONIC | 1 | |
| STI3219 | BOX REPAIR, STANDARD TOOLS | 1 | |
| SUS921L | STANDARD TOOL - BUCKING BAR | 2 | |
| T-TL610 | 4WAY VALVE TOOL STANDARDE BORE | 1 | |
| T5-2002-101-00 | STANDARD TOOLS TENSIOMETER | 23 | |
| TC7829 | STAHLWILLE TOOL BOX LINE AVIONICS OR EQUIVALENT STANDARD AVIONICS TOOL BOX | 1 | |
| TL-2243 | MRI NON MAGNETIC SIEMENS 32 PIECE STANDARD TOOL KIT | 1 | |
| TOOL BOX | STAHLWILLE TOOL BOX LINE AVIONICS OR EQUIVALENT STANDARD AVIONICS TOOL BOX | 1 | |
| TOOLBOX STANDARD | TOOLBOX STANDARD | 1 | |
| VANMAR NO 1 CAGE | VANMAR NO 1 STANDARD CAGE TOOL | 1 | |
| VANMAR NO 2 CAGE | VANMAR NO 2 STANDARD CAGE TOOL | 1 | |
| WCI-CAM-A30-1-30-V2 | MANDREL - STANDARD CA TOOLING | 1 | |
| WCI-CAM-A50-1-40-V2 | MANDREL - STANDARD CA TOOLING | 1 | |
| WCI-CAM-A72-2-60-V2 | MANDREL - STANDARD CA TOOLING | 1 | |
| WCI-EKA330533226-3 | STANDARD TOOL TOOLD07 | 1 | |
| WCI-TK-06-2-N-2150 | COLD WORKING TOOL STANDARD | 2 | |
| WCI-TK-06-2-N-_2150 | COLD WORKING TOOL STANDARD | 2 | |
| WCI-TK-10-1-N-.3245 | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-10-1-N-3245 | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-10-2-N | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-12-1-N | COLD WORKING TOOL STANDARD | 2 | |
| WCI-TK-12-1-N-.3870 | COLD WORKING TOOL STANDARD | 2 | |
| WCI-TK-12-1-N.3870 | COLD WORKING TOOL STANDARD | 2 | |
| WCI-TK-12-2-N | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-12-2-N-.4025 | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-16-1-N | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-16-1-N-.5120 | COLD WORKING TOOL STANDARD | 1 | |
| XP-2000 | STANDARD TOOL, DIGIT | 1 | |
| XP2000 | STANDARD TOOL, DIGIT | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
