| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 545-020 | STANDARD TIP | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1091K2 | GREASE-DISPENSING TIP FOR STANDARD GREASE FITTINGS, 1-1/2" LONG, NPSF THREAD | 1 | |
| 14H-45 | CONTACT TIPS - STANDARD THREADED STYLE 1.2 MM | 1 | |
| 9317796 | S-MP-3 MECHANICAL IMPEDANCE ANALYSIS PROBE, STANDARD, RIGHT ANGLE PROBE, .5 IN. TIP DIAMETER (CAN BE | 1 | |
| 9317808 | 9317808 : S-MP-4 STANDARD .25' RIGHT ANGLE MIA PROBE, SMALL 6.35 MM (0.25") TIP DIAMETER, REQUIRES B | 1 | |
| 9322075 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 | |
| AF-5272 | CUSTOM COUNTERBORE ROTARY ADJUSTABLE X STYLE PROBE WITH THE COIL LOCATED AT THE EDGE OF THE PROBE TIP, .936'-1.0" 2.0"WL, SUPPLIED WITH A 4 PIN FICHER CONNECTOR, 100 KHz-2MHz Includes Test Report and Certificate of Conformance REFERENCE STANDARD - NDT3117 | 1 | |
| AFP-1012 | 10 MHZ .125" dia focused Straight shaft pencil transducer with a .080" Replaceable tip. Standard microdot connector | 1 | |
| AFP-1012/90 | 10 MHZ 90° .125"Ø diameter focused pencil transducer with a .060" Replaceable tip. Standard microdot connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFP-1512 | 15 MHZ .125" dia focused Straight shaft pencil transducer with a .080" Replaceable tip. Standard microdot connector | 1 | |
| AFP-1512/90 | 15 MHZ 90° SHAFT .125" dia focused pencil transducer with a .060" Replaceable tip. Standard microdot connector | 1 | |
| AFP-7512 | 7.5MHZ .125" dia. High Resolution focused Straight shaft pencil transducer with a .080" Replaceable tip. Standard microdot connector. ( K-PEN style ) | 1 | |
| AFP-7512/90 | 7.5MHZ 90° angle head. High Resolution .125" dia focused pencil transducer with a .080" Replaceable tip. Standard microdot connector. K-PEN Style | 1 | |
| AN670-55-31-102 | CALIBRATION REFERENCE STANDARD (CRS), MADE OF ALUMINUM WITH MULTIPLE LAYERS CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| AN670-55-31-110 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EX601R51093 | Calibration reference standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670-59145 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59148 | CALIBRATION REFERENCE STANDARD (CRS) MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670-59156 | CALIBRATION REFERENCE STANDARD MADE FROM MULTIPLE ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59157-003 | CALIBRATION REFERENCE STANDARD, MULTIPLE LAYERED FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXBC670-59159 | CALIBRATION REFERENCE STANDARD(CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM)NOTCHES (MHIRJ). | 1 | |
| EXBC670-59160 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERED FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EXBC670-59164 | CALIBRATION REFERENCE STANDARD MULTIPLE LAYERS ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59177 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59178 | CALIBRATION REFERENCE STANDARD, MULTIPLE LAYER FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXBC670-59179 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 1 | |
| EXBC670-59180 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59181 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670-59182 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 1 | |
| EXBC670-59183-001 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) TRANSDUCER - ANGLE BEAM, 5.0 MHZ, 0.375 IN. (9.53 MM) H X | 1 | |
| EXBC670-59185 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EXBC670−59044 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59068 | Calibration reference standard multiple layered assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59145 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59148 | Calibration Reference Standard (CRS) multiple layers fastened assembly that contains electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59153 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59156 | Calibration Reference Standard made from multiple aluminum alloy containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59157 | Calibration reference standard multiple layered fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59158 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | 1 | |
| EXBC670−59159 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | 1 | |
| EXBC670−59164 | Calibration Reference Standard multiple layers assembly that contains electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59177 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59178 | Calibration reference standard multiple layer fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59180 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59181 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| I-OST-16X16-LP8-HMHNS | I-OST-16X16-LP8-HMHNS;S600i 16x16 50um MM LC/PC ETHernet MULTIPCL HT SWP NRML Standard | 1 | |
| I-OST-24X24-LU1-HMHNS | I-OST-24X24-LU1-HMHNS;S6000I OST-24X24 LC/PC SM ETH MULTIPCL HT SWP NRML Standard | 1 | |
| I-OST-32XCC-LU1-HMHNS | I-OST-32XCC-LU1-HMHNS;S6000i Polatis OST 32xCC LC/PC SM ETH MULTIPCL HT SWP NRML Standard | 1 | |
| L17-200 | WING COVERS, standard wingtip, WINTER USE (set of 2) | 1 | |
| L17-205 | WING COVERS, standard wingtip, ALL YEAR USE (set of 2) | 1 | |
| M1-TIPS-STD | STANDARDREPLACEMENTTIPS | 1 | |
| MAU-220 | WING COVERS (standard tip), WINTER USE (set of 2) | 1 | |
| MAU-225 | WING COVERS (standard tip), ALL YEAR USE (set of 2) | 1 | |
| MHS-29-1A-0 | ROTATING PROBE TEST BLOCK, MULTIPLE HOLE STANDARD - 29 HOLES | 1 | |
| N-OST-16X16-CA1-HMHNS | N-OST-16X16-CA1-HMHNS;S6000N Polatis OST 16X16 LSC/PC SM ETH MULTIPCL HT SWP NRML Standard | 1 | |
| N-OST-192X192-LU1-HMWNS | N-OST-192X192-LU1-HMWNS;S6000N OST 192X192 LC/PC SM ETH MULTIPCL HT SWP NRML Standard | 1 | |
| N-OST-256X256-LU1-HMWNS | N-OST-256X256-LU1-HMWNS;S6000N OST 256x256 LC/PC SM ETH MULTIPCL HT SWP NRML Standard | 1 | |
| N-OST-48X48-LA1-HMHNS | N-OST-48X48-LA1-HMHNS;Polatis N6000 OST 48x48 LC/APC SM ETH MULTIPCL HT SWP NRML Standard | 1 | |
| N-OST-96X96-LU1-HMWNS | N-OST-96X96-LU1-HMWNS;S6000N OST 96X96 LC/PC SM ETH MULTIPCL HT SWP NRML Standard | 1 | |
| PA24-200 | WING COVERS (standard wingtips), WINTER USE (set of 2) | 1 | |
| PA24-205 | WING COVERS (standard wingtips), ALL YEAR USE (set of 2) | 1 | |
| PA24-240 | WING COVERS (standard wingtips), hail protection type, WINTER USE (set of 2) | 1 | |
| PA24-245 | WING COVERS (standard wingtips), hail protection type, ALL YEAR USE (set of 2) | 1 | |
| RAAU1A11 | C Clamp Locking Pliers With Standard Tip | 1 | |
| SGD2B | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 7/32" | 1 | |
| SGD4B | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 1/4" | 1 | |
| SGD6B | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 5/16" | 1 | |
| SGD8B | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 3/8" | 1 | |
| SGD8BR | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 3/8" | 2 | |
| SHD10R | "FLAT TIP INSTINCT® HARD GRIP STANDARD SCREWDRIVER (RED)" | 2 | |
| SHD8R | "FLAT TIP INSTINCT® HARD GRIP STANDARD SCREWDRIVER (RED)" | 2 | |
| SK601R-30008A | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERED FASTENED ASSEMBLY, EQUIVALENT IN MATERIAL AND THICKNESS AS THE INSPECTION AREA CONTAINING SUBSURFACE ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 6 | |
| ST10-907-H | STANDARD TOOL - CARBIDE TIPPED DRILL | 1 | |
| ST931 | STANDARD TOOL - BALL POINT MULTIPLE - BEARING STAKING TOOL | 1 | |
| ST931-190-500 | Standard tool,ball point multiple-bearing starking tool | 1 | |
| ST931-250-750 | Standard tool,ball point multiple-bearing starking tool | 2 | |
| ST9999-VBA-201 | Standard tool-vacuum generator multiple venturi | 4 | |
| U8010011 | S-MP-3 MECHANICAL IMPEDANCE ANALYSIS PROBE, STANDARD, RIGHT ANGLE PROBE, .5 IN. TIP DIAMETER (CAN BE | 1 | |
| U8770335 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
