| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| AGE-04362-401 | STANDARD SET | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 2591553-901 | CALIBRATION SET - STANDARD (CALIBRATION) | 1 | |
| (CALIB) 98F29003000000 | WRENCHES WRENCHES-STANDARD TORQUE SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L29003002000 | TOOLSET TOOL SET,STANDARD TORQUE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D51407291001 | STANDARD SET, CALIBRATION (CALIBRATION) (CALIBRATION) | 1 | |
| 04-S3 | Malco® Hand Seamers (Jaw width: 3-1/4" W x 1-1/4" D) (Overall length: 8-3/4" (222 mm)) (Type: Standard) (Add to cart: Add To Cart) (Jaw width: 3-1/4" W x 1-1/4" D) (Overall length: 8-1/2" (216 mm)) (Type: Offset) (Add to cart: Add To Cart) | 1 | |
| 04-S6 | Malco® Hand Seamers (Jaw width: 3-1/4" W x 1-1/4" D) (Overall length: 8-3/4" (222 mm)) (Type: Standard) (Add to cart: Add To Cart) (Jaw width: 3-1/4" W x 1-1/4" D) (Overall length: 8-1/2" (216 mm)) (Type: Offset) (Add to cart: Add To Cart) (Jaw width: 6" | 1 | |
| 10156 | STANDARD RIVET SET KIT WITH 3X RIVET GUN | 1 | |
| 10213 | WILLIAMS 13 piece Standard Hex Key Set | 2 | |
| 1030-1 | STANDARD FLUSH SETS | 3 | |
| 1030-2 | STANDARD FLUSH SETS | 3 | |
| 1030-3 | STANDARD FLUSH SETS | 4 | |
| 10302 | STANDARD FLUSH SET 1 INCH DIA | 3 | |
| 106ETMAMY | Set, Socket Driver, Metric, Hex, Standard, 2 to 6 mm (6 pcs.) | 1 | |
| 110ETMAY | Set, Socket Driver, Hex, Standard, 1/16" to 1/4" (10 pcs.) | 2 | |
| 110TMDY | 1/4 STANDARD SOCKET SET 3/16" - 9/16" | 4 | |
| 120A | STANDARD RIVET SET MIX | 1 | |
| 12245-011-001 | SET, TEST, CALIBRATION STANDARD | 1 | |
| 12445-002-003 | TOOL, TEST SET, CALIBRATION STANDARD | 3 | |
| 13060 | 6" STANDARD HOLE FINDER 5 PIECE SET | 1 | |
| 13230 | 13" STANDARD HOLE FINDER 5 PIECE SET | 1 | |
| 208-104 | ENGINE INLET PLUGS, Standard Aero Mod (set of 2) | 1 | |
| 208EFAY | Set, Socket Driver, Hex, Standard, 1/8" to 3/8" (8 pcs.) | 2 | |
| 208EFTABMY | Set, Socket Driver, Metric, Ball Hex, Standard, 1/4"-3/8" Drive, 3 to 10mm (8 pcs.) | 1 | |
| 208EFTABY | STANDARD BALL HEX BIT SOCKET SET | 1 | |
| 208FRDH | 8 PC 3/8" DRIVE STANDARD TORQUE ADAPTOR SET (5/16" - 3/4") | 1 | |
| 210EFTAMY | DRIVE METRIC STANDARD HEX BIT SOCKET SET | 1 | |
| 211EFAMY | Set, Socket Driver, Metric, Hex, Standard, 4 to 14 mm (11 pcs.) | 1 | |
| 212EFTAY | 12 PC COMBINATION DRIVE SAE STANDARD HEX DRIVER BIT SOCKET SET (1/16-3/8" | 4 | |
| 212EFTXY | 12 PIECE TORX BIT COMBO UNIT STANDARD SOCKET SET | 2 | |
| 2285/90.02 | 2285/90.02;Standard Stereo Headset with Volume Control | 1 | |
| 23 | Interapid 074111502 - Dial Test Indicator Sets 312 standard, Range - mm | 1 | |
| 23-55ST | CALIBRATION STANDARD TEST SET | 1 | |
| 230 | STANDARD FEELER GAUGE SETS | 6 | |
| 2KEX-120 | INTAKE/EXHAUST COVERS, Standard Design Strap Type (set of 4) | 1 | |
| 307ESAMY | SOCKET DRIVER SET, METRIC, HEX, STANDARD, 6 TO 19 MM, 7 PCS, MAKE: SNAP ON | 1 | |
| 307ESAY | Set, Socket Driver, Hex, Standard, 5/16" to 3/4" (7 pcs.) | 1 | |
| 330-400 | BLADE COVERS, STANDARD TYPE (set of 3) | 1 | |
| 348-3666 | KNIPEX VDO Standard tool set | 1 | |
| 455-9100 | ELT TEST SET (ETS) - STANDARD | 13 | |
| 505-03439-403 | SENSITIVITY SETTING STANDARD | 1 | |
| 5163A42 | WRENCH:COMBINATION STANDARD SET IN METRIC TOOLS - HAND / POWER :10 PIECE INCH WRENCH SET 1/4" - 3/4" ORDER PN 5163A43 FROM MCMASTER- CARR MANUFACTURER PART NUMBER (M) - 5163A42; MANUFACTURER (MA) - ARMSTRONG; VENDOR/SUPPLIER PART NUMBER (VN) - 5163A42 | 1 | |
| 5163A43 | WRENCH SET:COMBINATION TYPE:RATCHETING BOX SIZE:3/8 INCH - 3/4 INCH OPEN SIZE:3/8INCH - 3/4INCH STYLE:12- POINT MATL:CHROME PLATED NUMBER OF PIECES:10 PIECES CONT:PLASTIC WRENCH:COMBINATION STANDARD SET IN INCHES TOOLS - HAND / POWER :STANDARD SET IN INCH | 1 | |
| 53-10-137 | BAE 146-RJ SERIES REFERENCE STANDARD SET OF 8 UNITS, 53-10-12 PT 6 FIGURE 7 PAGES 907-910. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-205 | OFFSET RIVET GUN SET 5PC MIX UNIV. STANDARD 'L" 3-1/2" .401 | 2 | |
| 530G12406-1-3 | CALIBRATION STANDARDS-STEEL BLOCKS,SET OF 3 | 1 | |
| 5414 | TORQUE SCREWDRIVER VALVE CORE DRIVER WITH PRESET TORQUE TO TIRE & RIM STANDARDS | 7 | |
| 605-10-PC-AU | SCREWDRIVER SET (STANDARD) | 1 | |
| 810-218D | Ref. Standard set for Harness Tester (t) | 1 | |
| 88-700 | GAGE SET STANDARD | 2 | |
| 88-800 | GAGE SET STANDARD | 2 | |
| 90252 | Digital Aircraft Cable Tensiometers (Description: Standard Preset: 1/16", 3/32",) (Description continued: 1/8" & 5/32") (Range: 20 to 250 lbs) (Resolution: 0.5 lbs) (Add to cart: Contact us to order) | 1 | |
| 90253 | Digital Aircraft Cable Tensiometers (Description: Standard Preset: 1/16", 3/32",) (Description continued: 1/8" & 5/32") (Range: 20 to 250 lbs) (Resolution: 0.5 lbs) (Add to cart: Contact us to order) (Description: Standard Preset: 3/32", 1/8" &) (Descript | 1 | |
| 90254 | Digital Aircraft Cable Tensiometers (Description: Standard Preset: 1/16", 3/32",) (Description continued: 1/8" & 5/32") (Range: 20 to 250 lbs) (Resolution: 0.5 lbs) (Add to cart: Contact us to order) (Description: Standard Preset: 3/32", 1/8" &) (Descript | 1 | |
| 90255 | Digital Aircraft Cable Tensiometers (Description: Standard Preset: 1/16", 3/32",) (Description continued: 1/8" & 5/32") (Range: 20 to 250 lbs) (Resolution: 0.5 lbs) (Add to cart: Contact us to order) (Description: Standard Preset: 3/32", 1/8" &) (Descript | 1 | |
| 235302 | STANDARD TEST SET | 1 | |
| 535303 | STANDARD TEST SET | 1 | |
| 9080708 | CALIBRATION STANDARD SET (3 STDS) 20 TO 40 IACS (30 IACS); (42 IACS); (60 IACS) | 1 | |
| 9081003 | CALIBRATION STANDARD SET (2 STDS.) 4.4 MS/M (8 IACS);58 MS/M (100 IACS) | 1 | |
| 9522321 | CONDUCTIVITY STANDARD SET | 1 | |
| 97880831 | WRENCH:COMBINATION STANDARD SET ... | 1 | |
| 98F29003000000 | WRENCHES-STANDARD TORQUE SET | 15 | |
| 98F29003000000-57 | WRENCHES-STANDARD TORQUE SET | 1 | |
| 98L29003002000 | TOOL SET,STANDARD TORQUE | 6 | |
| 98S57205030.001 | ATR72 REFERENCE STANDARD SET OF 5 | 4 | |
| 98S57205030.001-.005 | ATR72 REFERENCE STANDARD SET OF 5 PT 4 51-40-00 | 1 | |
| 98S57205030.005 | ATR72 REFERENCE STANDARD SET OF 5 | 2 | |
| 99A53307264000 | CALIBRATION STANDARD SET | 1 | |
| 99D5109001000 | CALIBRATION STANDARD SET AIRBUS | 1 | |
| 99D51407291000 | STANDARD SET, CALIBRATION | 2 | |
| 99D51407291001 | STANDARD SET, CALIBRATION | 7 | |
| 99D51407291001 BLOCK 2 | STANDARD SET, CALIBRATION | 1 | |
| 99D51407291001-3 | Airbus Carbon Standard SET, ALL PT4 51-10-06:FIG402 PG404, Fabric Material #3 | 1 | |
| 99D55109001000 | CALIBRATION STANDARD SET | 7 | |
| 99D57004000000 | Calibration standard set. A340-500/-600, 51-63-03-PB1; Pages 2-3, Figure 51-63-03-991-001-A SHEET 01 AND SHEET 02, Includes 99D57004000040 and 99D57004000042. | 4 | |
| 99F53107330000 | Airbus A318/A319/A320/A321 Conductivity Standard Block Set SB A320 57-1190 Figure 3. Material: 2024-T3 and 2024-T0 Aluminum. .047", 063" and .080" thickness in each Aluminum Temper Painted with Primer. Includes Test Report and Certificate of Conformance. | 2 | |
| 99GP-06-OLAD | OFFSET NOSE ASSY HUCK POWER RIVETERS (STANDARD EXTENDED) | 1 | |
| 99GP-06-ORAD | OFFSET NOSE ASSY HUCK POWER RIVETERS (STANDARD) | 1 | |
| 99N51107332000 | AIRBUS REFERENCE STANDARD A380-800 51-10-30-991-003-A FOR CLADDING MEASUREMENT BLOCK SET. Includes Test Report and Certificate of Conformance. | 2 | |
| AC500-900 | COCKPIT HEATSHIELDS, standard pilot's side (no door), w/ skylights (set of 6) | 1 | |
| AC500-903 | COCKPIT HEATSHIELDS, standard side window (no door), no skylights (set of 4) | 1 | |
| ACRS3-172942 | CALIBRATED CONDUCTIVVITY REFERENCE STANDARD SET OF 3. KIT CONSISTS OF MAGNESIUM, 6061-T6 AL AND 2024-T3 AL ( IACS Nominal values of 17%, 29% and 42% respectively) | 1 | |
| AFNDT-3114 | 16 HOLE REFERENCE STANDARD 6AL-4V TITANIUM. 2 OF EACH HOLE SIZES: 3/16", 13/64" 7/32" , 1/4", 17/64", 9/32", 7/16", 9/16". .030" x .030" CORNER NOTCH IN 1st HOLE SET and .060" x .020" MID-WALL NOTCH IN 2nd HOLE SET. Tolerance: .006" +/-.001". Includ... | 1 | |
| AFNDT-3115 | 16 HOLE REFERENCE STANDARD 4340 CRES STEEL. 2 OF EACH HOLE SIZES: 3/16", 13/64" 7/32" , 1/4", 17/64", 9/32", 7/16", 9/16". .030" x .030" CORNER NOTCH IN 1st HOLE SET and .060" x .020" MID-WALL NOTCH IN 2nd HOLE SET. Tolerance: .006" +/-.001". Includ... | 1 | |
| AFNDT-3116 | 16 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. 2 OF EACH HOLE SIZES: 3/16", 13/64" 7/32" , 1/4", 17/64", 9/32", 7/16", 9/16". .030" x .030" CORNER NOTCH IN 1st HOLE SET and .060" x .020" MID-WALL NOTCH IN 2nd HOLE SET. Tolerance: .006" +/-.001". Inclu... | 1 | |
| AFNDT-3347CS | EDDY CURRENT WELD SURFACE REFERENCE STANDARD. EDM NOTCHES: 0.5mm, 1.0mm, 2.0mm (.1mm (.004") WIDE ± .05mm( .002") MAX WIDTH .152mm (.006"). MATERIAL: 4340 CARBON STEEL. SIZE: 1.0"W x 4.0"L Includeds 4 piece .020" thick shim and Key Ring set. Includes Tes | 1 | |
| AGE-04329-401 | SET- REFERENCE STANDARD, NDI | 1 | |
| AGE-04329-401 | STANDARDS SET - REFERENCE | 1 | |
| AGE-04362-401 | SET- REFERENCE STANDARD, NDI | 1 | |
| AGE-04383-001 | STANDARDS SET - REFERENCE, NDI – GENERAL EDDY CURRENT TEST | 1 | |
| AGE-04383-003 | STANDARDS SET, REFERENCE, NDI - GENENRAL ADDY CURRENT TEST | 1 | |
| AGE-04707-401 | SET- REFERENCE STANDARD, NDI | 2 | |
| AGE-04707-401 | SET - REFERENCE STANDARD NDI | 2 | |
| AGE-04900-401 | SET- REFERENCE STANDARD, NDI | 4 | |
| AGE04362-401 | SET- REFERENCE STANDARD, NDI | 1 | |
| AH135-600 | BLADE COVERS (STANDARD DESIGN) (set of 4) | 1 | |
| ASTM F 428-7 | GLASS SCRATCH VISUAL COMPARISON STANDARD SET / PLATES | 1 | |
| ASTW-8 | CUSTOM ACRYLIC CALIBRATION STANDARDS, SET OF 8, THICKNESS .921 / .818 / .559 / .504 / .275 / .248 / .157 / .134 | 1 | |
| ATS 120A | STANDARD RIVET SET MIX | 1 | |
| AW1020DK | WRENCH SET, AW1020DK, 20/PC, TOOLS, HAND, TYPE, TOOL WRENCH SET, TYPE HEXAGONAL, STANDARD SAE | 3 | |
| AWEF9K | SET OF STANDARD HEXAGON | 3 | |
| B18-120 | PROPELLOR/SPINNER COVERS, 2 blade Hamilton-Standard (set of 2) | 1 | |
| B18-121 | INSULATED PROPELLOR/SPINNER COVERS, 2 blade Hamilton-Standard (set of 2) | 1 | |
| B60-107 | EXHAUST PLUGS, standard engine (set of 2) | 1 | |
| BHS13A | Set, Wrench, L-Shape, Ball Hex, Standard (13 pcs.) (0.050" to 3/8') | 3 | |
| BOER708 | RATCHET COMBINATION WRENCH SET, STANDARD LENGTH,8PCS,SIZE 5/16”-3/4” | 2 | |
| BOERF708A | Set, Wrench, Flex Head Ratcheting Box / Open End, Standard, 12° Offset, (8 pcs.) | 2 | |
| BPS7 | BLUEPOINT STANDARD PLIERS SET | 1 | |
| BUNDO | STANDARD WEIGHT SET 1 GRAM - 10 KGRAM (17 EA) | 1 | |
| C130-900 | FLIGHT DECK HEATSHIELD SET (standard models), NSN: 1680-66-164-1476 (set of 13) | 1 | |
| C500-300 | WING COVERS (Standard model) (set of 2) | 1 | |
| C845-1032 | WRENCH TYPE UPSETTERS DESCRIPTION: FOR STANDARD | 1 | |
| CC817 | Starrett S234MG SET STANDARDS 25-275MM | 1 | |
| CC825 | Starrett S234J SET STANDARDS 12-23" | 1 | |
| CMMT44778 | CRAFTSMAN® STANDARD (SAE) OPEN END IGNITION WRENCH SET (8-PIECE) CMMT44778 | 1 | |
| CREF5- 04174559100 | CERTIFIED CONDUCTIVITY REFERENCE STANDARD SET OF 5. INCLUDES VALUES OF 4.6% IACS ( /- 0.6%), 17.2% IACS ( /- 1.5%), 45.7% IACS ( /- 4%), 59.9% IACS ( /- 6%) AND 100% IACS ( /- 10%). SET INCLUDES PLASTIC HOLDER. | 1 | |
| CREF5-01293242100 | CONDUCTIVITY STANDARD SET | 1 | |
| CU882 | Starrett S436MFXRLZ MIC SET + STANDARDS | 1 | |
| DPS1000 | DIGITAL PITOT STATIC TEST SET , WITH STANDARD ACCESSORIES | 9 | |
| E135-600 | BLADE COVERS (STANDARD DESIGN) (set of 4) | 1 | |
| ECL-100 | ENGINE COVER SET, standard design (set of 8) | 1 | |
| ELOTEST M2 | EDDY CURRENT FLAW DETECTOR WITH A SET OF SENSORS, STANDARD SAMPLES, CABLES | 3 | |
| ELOTEST M3 | EDDY CURRENT FLAW DETECTOR WITH A SET OF SENSORS, STANDARD SAMPLES, CABLES | 1 | |
| F72959-XX | SET - SPANNER WRENCH, AN STANDARD TYPE | 1 | |
| FEN06 | STANDARD TRIPOD-JACK SET A320 FAMILY INCL. NEO - TAIL | 1 | |
| FEN10 | STANDARD TRIPOD-JACK SET A320 FAMILY INCL. NEO - NOSE | 1 | |
| FEN351 | STANDARD TRIPOD-JACK SET A320 FAMILY INCL. NEO - WING | 1 | |
| FG-M6ADP | ADAPTER STANDARD SET FOR RGANGE 2-200 LB | 1 | |
| GOEX722K | 22 PC 12-POINT SAE FLANK DRIVE® STANDARD COMBINATION WRENCH SET (5/16-1-5/8") | 3 | |
| GSB2840008C | SET - HARNESS ADAPTER Q100, 200, 300, METRIC, STANDARD RANGE | 2 | |
| GSE 539 | GSE 539 STANDARDS SET - REFERENCE, NDI - GENERAL EDDY CURRENT TES | 1 | |
| GXO810NP | STANDARD HANDLE 60 DEGREE OFFSET HEAD. SIZE: 1/4" X 5/16" | 1 | |
| H10-60 | STANDARD NOISE ATTENUATING HEADSET | 11 | |
| H3310 | STANDARD HEADSET | 10 | |
| J4902A | SOCKET SET, HEX BIT, 3/8" DRIVE STANDARD: 1/4", 1/8", 3/16", 3/8", 5/16" 5/32", 7/32", METRIC: 4, 5, 6, 7, 8, 10MM, SOCKET BARS 6-1/4", 9", SOCKET CLIP 3/8" DR, 13 PIECE, MAKE: PROTO | 1 | |
| JHWWS-7-19TB | STANDARD SOCKET SET C1‘ FROM 11/2’ TO 3 1/2‘ PLUS UNIVERSAL JOINT AND 7 3/8’ EXTENSION INCLUDES METAL CASE - GENERIC | 1 | |
| L17-200 | WING COVERS, standard wingtip, WINTER USE (set of 2) | 1 | |
| L17-205 | WING COVERS, standard wingtip, ALL YEAR USE (set of 2) | 1 | |
| L90-210 | WING COVERS (STANDARD MODELS), WINTER USE (set of 2) | 1 | |
| L90-215 | WING COVERS (STANDARD MODELS), ALL YEAR USE (set of 2) | 1 | |
| LP404 | SET,LOCKING PLIERS, STANDARD GRIP, 4 PCS. | 3 | |
| MAU-220 | WING COVERS (standard tip), WINTER USE (set of 2) | 1 | |
| MAU-225 | WING COVERS (standard tip), ALL YEAR USE (set of 2) | 1 | |
| MAU-901 | WINDSHIELD/SKYLIGHT HEATSHIELDS (Standard Skylight) (set of 2) | 1 | |
| MD900-600 | BLADE COVERS (standard type) (set of 5) | 1 | |
| NDT-3014B | Eddy current standard set | 1 | |
| NDT1039-T1/T2 | BOEING REFERENCE STANDARD NDT1039-T1/T2 X 1SET OF 5 PIECES | 2 | |
| NDT3267-T1/T2 | BOEING REFERENCE STANDARD NDT3267-T1/T2 X 1SET OF 4 PIECES | 1 | |
| NRK-3AST | CUSTOM NAVY BLOCK SET, 3 Blocks Total. Materials: 7075-T6 Aluminum, 4340 Cres Steel and 6AL-4V Titanium. Each Standard Includes 20 Fastener Holes (.156-.750) Containing a total of 71 EDM Notches. All Standards Manufactured in Accordance with U.S.A.F. ... | 1 | |
| OH58-300 | BLADE COVERS, standard type (set of 4) | 1 | |
| PA24-200 | WING COVERS (standard wingtips), WINTER USE (set of 2) | 1 | |
| PA24-205 | WING COVERS (standard wingtips), ALL YEAR USE (set of 2) | 1 | |
| PA24-240 | WING COVERS (standard wingtips), hail protection type, WINTER USE (set of 2) | 1 | |
| PA24-245 | WING COVERS (standard wingtips), hail protection type, ALL YEAR USE (set of 2) | 1 | |
| PA31-100 | ENGINE INLET PLUGS (STANDARD MODEL) (set of 4) | 1 | |
| PC7-100 | ENGINE PLUGS (standard design: Main Inlet & 3 smaller wedge plugs) (set of 4) | 1 | |
| PDL 601 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 Probe Guide Set PDL 601-101 thru 109 | 1 | |
| PDL 624 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 Probe Guide Set PDL 624-101 thru 109 | 1 | |
| PWA104625 | SENSITIVITY SETTING STANDARD | 1 | |
| PWA105249 | SENSITIVITY SETTING STANDARD | 1 | |
| R1011C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 5/16"-11/32", 12-POINT | 3 | |
| R1012C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 5/16"-3/8", 12-POINT | 1 | |
| R1214C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | 4 | |
| R1618C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1/2"-9/16", 12-POINT | 5 | |
| R2022C | SNAP-ON, WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 5/8"-11/16", 12-POINT SNAP-ON | 4 | |
| R2426C | SNAP-ON, WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/4"-13/16", 12-POINT SNAP-ON | 2 | |
| R2830C | SNAP-ON, WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 7/8"-15/16", 12-POINT SNAP-ON | 2 | |
| R3032C | SNAP-ON, WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 15/16"-1", 12-POINT SNAP-ON | 1 | |
| R810C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1 /4"-5/16", 12-POINT | 4 | |
| RBI9600T | AVIONICS TOOLKIT – 262 PIECE SET – IMPERIAL (SAE / STANDARD) | 1 | |
| RBZ1214 | STANDARD O” OFFSET RATCHETING BOX WRENCH, 12 POINT 3/8-7/16” | 3 | |
| RSN-3AST | Gage Set NSN 5280-01-352-1336, Consist of 7075T6, 4340 & 6AL4V Standards | 1 | |
| RV10-100 | ENGINE INLET PLUGS, Standard Cowling (set of 3) | 1 | |
| RYA1011 | WRENCH, RATCHETING BOX, 25° OFFSET, STANDARD LENGTH, 5/16IN-11/32IN, 12-POINT | 3 | |
| RYA1214 | WRENCH, RATCHETING BOX, 25° OFFSET, STANDARD LENGTH, 3/8IN-7/16IN, 12-POINT | 4 | |
| RYA810 | WRENCH,RATCHETING BOX,25 OFFSET.STANDARD LENGHT,1/4"-5/16",12- POINT | 3 | |
| S76-210 | BLADE COVERS, S76D model, (Standard Type) (set of 4) | 1 | |
| SB09530016-5 | Douglas Standard, SB 53-253, A27-320 - SAME AS DAC GSET AL.01 but 7075-T651, Mark with SB53-253, A27-320 | 2 | |
| SET OF SCREW DRIVERS IN INCHES, AVIATION STANDARD | SET OF SCREW DRIVERS IN INCHES, AVIATION STANDARD | 1 | |
| SHDX60R | HARD HANDLE STANDARD SCREWDRIVERS SET | 2 | |
| SIGMATEST (D2-069) | CALIBRATION STANDARD SET (2 STDS.) 4.4 MS/M (8 IACS);58 MS/M (100 IACS) | 1 | |
| ST1069D | STANDARD TOOL GROMMET SET FOR INSTALLATION OF BAC-G20L | 1 | |
| ST1069D-249 | Standard tool grommet set for installation of BAC-G20L | 1 | |
| ST1069D-374 | Standard tool grommet set for installation of BAC-G20L | 1 | |
| ST1069D-431 | Standard tool grommet set for installation of BAC-G20L | 1 | |
| ST2580-469-2-12-20 | Standard tool-wrench offset box end | 1 | |
| ST2580-469-2-12-20-B | Standard Tool - Wrench Offset Box End | 2 | |
| ST2580-469-2-24-40B | Standard tool-wrench offset box end | 1 | |
| ST878D | Standard Tool - Sleeveset for Presetting BACS13AP Flareless Tube Fittings | 8 | |
| Stackable Standard | Set of 4 standards, 2024T3 Plates, 0.040", 0.063", 0.068", 0.071", 0.100" | 1 | |
| T34-210 | WING COVERS (STANDARD MODELS), WINTER USE (set of 2) | 1 | |
| T34-215 | WING COVERS (STANDARD MODELS), ALL YEAR USE (set of 2) | 1 | |
| THXB1214A- | WRENCH,BOXSTANDARD LG 10DEG OFFSET,3/8 X 7/16IN,12-PT | 1 | |
| THXB1618A | WRENCH,BOX,STANDARD LG 10DEG OFFSET 1/2 X 9/16IN,12-PT | 1 | |
| THXB2022A | WRENCH,BOX,STANDARD LG 10DEG OFFSET 5/8 X 11/16IN,12-PT | 1 | |
| THXB2426A | WRENCH,BOX,STANDARD LG 10DEG OFFSET 3/4 X 13/16IN,12-PT | 1 | |
| THXB2830A | WRENCH,BOX STANDARD LG,10DEG OFFSET 7/8 X 15/16IN,12-PT | 1 | |
| THXB3234A- | WRENCH,BOX,STANDARD LG 10DEG OFFSET 1 X 1-1/16IN,12-PT | 1 | |
| TS500 | TEST SET - UNDERWATER LOCATOR BEACON, LOW FREQUENCY (LF-ULB) AND STANDARD FREQUENCY ULB^T1 | 18 | |
| U8861902 | CONDUCTIVITY STANDARD SET | 1 | |
| WRENCH SET, L-SHAPE, BALL HEX, STANDARD (13 PCS.) (.050" TO 3/8') | WRENCH SET, L-SHAPE, BALL HEX, STANDARD (13 PCS.) (.050" TO 3/8') | 1 | |
| WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 1/2"-9/16", 12-POINT | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1 /4"-5/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1 /4"-5/16", 12-POINT | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1/2"-9/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| X0605 | FRANK DRIVE OFFSET BOX (STANDARD HANDLE) | 1 | |
| XB1214A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| XB1416A | WRENCH, BOX, STANDARD LENGTH, STANDARD LENGTH, 10° OFFSET, 7/16"-1/2", 12-POINT | 1 | |
| XB1618A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| XB1820A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 9/16"-5/8", 12-POINT | 1 | |
| XB2022A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 5/8"-11/16", 12-POINT | 1 | |
| XB2224A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 11/16"-3/4", 12-POINT | 1 | |
| XB2426A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 3/4"-13/16", 12-POINT | 1 | |
| XB3032A | WRENCH BOX OFFSET STANDARD 15/16"X1" | 1 | |
| XBM1011A | WRENCH BOX OFFSET STANDARD METRIC 10X11MM | 1 | |
| XBM1012A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 10-12 MM, 12 POINT | 1 | |
| XBM1214A | WRENCH BOX OFFSET STANDARD METRIC12X14MM | 1 | |
| XBM1315A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 13-15 MM, 12 POINT | 1 | |
| XBM1415A | WRENCH BOX OFFSET STANDARD METRIC 13X15MM | 1 | |
| XBM1417A | WRENCH BOX OFFSET STANDARD METRIC 14X17MM | 1 | |
| XBM1618A | WRENCH BOX OFFSET STANDARD METRIC 16X18MM | 1 | |
| XBM1719A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 17-19 MM, 12 POINT | 1 | |
| XBM1821A | WRENCH BOX OFFSET STANDARD METRIX 18X21MM | 1 | |
| XBM2224A | WRENCH BOX OFFSET STANDARD METIC 22X24MM | 1 | |
| XDES79A | 7/32–9/32" HEX, SAE SPLINE STANDARD HANDLE 15° OFFSET BOX WRENCH | 2 | |
| XDES810A | 1/4–5/16" HEX, SAE SPLINE STANDARD HANDLE 15° OFFSET BOX WRENCH | 3 | |
| XO1012 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 5/16"-3/8", 12-POINT | 1 | |
| XO1214 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| XO1618 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| XO1820 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 9/16"-5/8", 12-POINT | 1 | |
| XO2024 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 5/8"-3/4", 12-POINT | 1 | |
| XO2428 | WRENCH BOX OFFSET STANDARD 3/4"X7/8" | 1 | |
| XO810 | DOUBLE RING WRENCH, STANDARD LENGTH DEEP 60O OFFSET, 12 POINT, SIZE 1/4"X5/16” | 1 | |
| XS1214A | STANDARD OFFSET END SPRING SPANNER | 3 | |
| XS810A | WRENCH BOX OFFSET STANDARD 5/16"X1/4" | 3 | |
| Y282 | DIE BLANK SET - STANDARD | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
