| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0880000-3 | STANDARD | 2 | |
| 0880000-4 | STANDARD | 2 | |
| 0880000-5 | STANDARD | 2 | |
| 1002 | STANDARD | 4 | |
| 1004 | STANDARD | 6 | |
| 10003114 | Standard | 1 | |
| 10003115 | Standard | 1 | |
| 10540001-3 | STANDARD | 1 | |
| 10540001-5 | STANDARD | 1 | |
| 10540001-7 | STANDARD | 1 | |
| 10RS.26.1BM | STANDARD | 1 | |
| 12145-046-002 | STANDARD | 1 | |
| 126 | STANDARD | 7 | |
| 12845-582-001 | STANDARD | 1 | |
| 145-31661-401ABS-150 | STANDARD | 1 | |
| 145-34230-403 | STANDARD | 1 | |
| 145-34230-405 | STANDARD | 1 | |
| 145-34230-407 | STANDARD | 1 | |
| 145-34231-401 | STANDARD | 1 | |
| 145-34231-403 | STANDARD | 1 | |
| 145-34231-405 | STANDARD | 1 | |
| 145-34231-407 | STANDARD | 1 | |
| 145-44131-001 | STANDARD | 6 | |
| 185 | STANDARD | 2 | |
| 186A | STANDARD | 3 | |
| 186B | STANDARD | 3 | |
| 186C | STANDARD | 4 | |
| 186D | STANDARD | 4 | |
| 186E | STANDARD | 4 | |
| 186F | STANDARD | 3 | |
| 188A | STANDARD | 5 | |
| 189 | STANDARD | 7 | |
| 2683301-1 | STANDARD | 4 | |
| 369 | STANDARD | 2 | |
| 53-20-104/1 | STANDARD | 1 | |
| 5683101-2 | STANDARD | 2 | |
| 7947479-10 | STANDARD | 3 | |
| 833081-1 | STANDARD | 1 | |
| 98F29003000000 | STANDARD | 15 | |
| 98S51605000206 | STANDARD | 1 | |
| 98S51605001-200 | STANDARD | 4 | |
| 98S57105012-200 | STANDARD | 3 | |
| 99A51107299001 | STANDARD | 5 | |
| 99A55400729000 | STANDARD | 1 | |
| 99D51407291001 | STANDARD | 7 | |
| 99D52809004000 | STANDARD | 7 | |
| 99D57103002001 | STANDARD | 5 | |
| 99D57103013000 | STANDARD | 6 | |
| 99D57103015000 | STANDARD | 4 | |
| 99D57103016000 | STANDARD | 7 | |
| 99F54503000000 | STANDARD | 2 | |
| 99F54503002000 | Standard | 1 | |
| 9A53107261000 | STANDARD | 1 | |
| A607 | STANDARD | 4 | |
| A607A | STANDARD | 3 | |
| AFNDT-3180 | STANDARD | 1 | |
| AGE-04900-401 | STANDARD | 4 | |
| ANDT1015 | STANDARD | 3 | |
| ANDT1049 | STANDARD | 3 | |
| ANDT1050 | STANDARD | 3 | |
| ANDT1055 | STANDARD | 3 | |
| ANDT1056 | STANDARD | 4 | |
| ANDT1057 | STANDARD | 3 | |
| ANDT1079 | STANDARD | 4 | |
| ANDT4126 | STANDARD | 2 | |
| BAC 5578MANUFACTURE OF ADVANCED COMPOSITE PRIMARY STRUCTURE | STANDARD | 1 | |
| CA900-4 | STANDARD | 1 | |
| EN462-2 H1 IQI FE | STANDARD | 1 | |
| HC21743 | Standard | 1 | |
| IIW-01AL | STANDARD | 1 | |
| IIW1.IA | STANDARD | 1 | |
| MAB-AL | STANDARD | 1 | |
| NDT 6004 | STANDARD | 2 | |
| NDT 6005 | STANDARD | 2 | |
| NDT 6006 | STANDARD | 2 | |
| NDT 6007 | STANDARD | 2 | |
| NDT 6008 | STANDARD | 2 | |
| NDT 689 | STANDARD | 3 | |
| NDT 714 | STANDARD | 2 | |
| NDT 731 | STANDARD | 3 | |
| NDT-797 | STANDARD | 3 | |
| NDT001 | Standard | 1 | |
| NDT1002 | STANDARD | 1 | |
| NDT1016 | STANDARD | 3 | |
| NDT1017 | STANDARD | 2 | |
| NDT1018 | STANDARD | 3 | |
| NDT1019 | STANDARD | 3 | |
| NDT1020 | STANDARD | 2 | |
| NDT1021 | STANDARD | 2 | |
| NDT1022 | STANDARD | 3 | |
| NDT1023 | STANDARD | 2 | |
| NDT1024 | STANDARD | 2 | |
| NDT1025 | STANDARD | 2 | |
| NDT1026 | STANDARD | 2 | |
| NDT1027 | STANDARD | 2 | |
| NDT104 | STANDARD | 1 | |
| NDT1040 | STANDARD | 2 | |
| NDT1048 | STANDARD | 4 | |
| NDT1049 | STANDARD | 1 | |
| NDT1062 | STANDARD | 2 | |
| NDT1072 | STANDARD | 2 | |
| NDT1074 | STANDARD | 2 | |
| NDT1075 | STANDARD | 2 | |
| NDT1084 | STANDARD | 1 | |
| NDT1085-032 | STANDARD | 3 | |
| NDT1085-036 | STANDARD | 3 | |
| NDT1085-050 | STANDARD | 2 | |
| NDT1085-071 | STANDARD | 2 | |
| NDT1085-080 | STANDARD | 2 | |
| NDT1085-090 | STANDARD | 2 | |
| NDT1085-100 | STANDARD | 2 | |
| NDT1085-112 | STANDARD | 2 | |
| NDT1085-125 | STANDARD | 2 | |
| NDT1087-1 | STANDARD | 4 | |
| NDT1087-6 | STANDARD | 2 | |
| NDT1087-9 | STANDARD | 2 | |
| NDT1087-X | STANDARD | 1 | |
| NDT126 | STANDARD | 1 | |
| NDT3074 | STANDARD | 1 | |
| NDT3077 | STANDARD | 2 | |
| NDT3104 | STANDARD | 2 | |
| NDT3109 | STANDARD | 2 | |
| NDT3116 | STANDARD | 2 | |
| NDT3133 | STANDARD | 2 | |
| NDT3139 | STANDARD | 2 | |
| NDT3142 | STANDARD | 2 | |
| NDT3149 | STANDARD | 2 | |
| NDT3190- C | STANDARD | 2 | |
| NDT3190- D | STANDARD | 2 | |
| NDT3190-A | STANDARD | 2 | |
| NDT3190-B | STANDARD | 2 | |
| NDT3204 | STANDARD | 2 | |
| NDT3226 | STANDARD | 2 | |
| NDT3226A | STANDARD | 2 | |
| NDT3231 | STANDARD | 2 | |
| NDT3244 | STANDARD | 2 | |
| NDT3248 | STANDARD | 2 | |
| NDT3271 | STANDARD | 2 | |
| NDT3272 | STANDARD | 2 | |
| NDT3279 | STANDARD | 1 | |
| NDT3280 | STANDARD | 1 | |
| NDT3282 | STANDARD | 3 | |
| NDT3310-A | STANDARD | 1 | |
| NDT3310-B | STANDARD | 1 | |
| NDT3310-C | STANDARD | 1 | |
| NDT3313A | STANDARD | 1 | |
| NDT3317 | STANDARD | 1 | |
| NDT3318 | STANDARD | 1 | |
| NDT396 | STANDARD | 6 | |
| NDT396-1 | STANDARD | 1 | |
| NDT398 | STANDARD | 2 | |
| NDT5089 | STANDARD | 2 | |
| NDT6000A | STANDARD | 2 | |
| NDT6000B | STANDARD | 2 | |
| NDT6000C | STANDARD | 2 | |
| NDT6000D | STANDARD | 2 | |
| NDT6000E | STANDARD | 2 | |
| NDT6000EC | STANDARD | 2 | |
| NDT6001 | STANDARD | 2 | |
| NDT6002 | STANDARD | 2 | |
| NDT6009 | STANDARD | 2 | |
| NDT6010 | STANDARD | 1 | |
| NDT6011 | STANDARD | 2 | |
| NDT6014 | STANDARD | 2 | |
| NDT6015 | STANDARD | 2 | |
| NDT6016 | STANDARD | 2 | |
| NDT6017 | STANDARD | 2 | |
| NDT6018 | STANDARD | 2 | |
| NDT6019 | STANDARD | 2 | |
| NDT6020 | STANDARD | 2 | |
| NDT6021 | STANDARD | 2 | |
| NDT6022 | STANDARD | 2 | |
| NDT6023 | STANDARD | 2 | |
| NDT6024 | STANDARD | 2 | |
| NDT6025-1 | STANDARD | 1 | |
| NDT6025-2 | STANDARD | 1 | |
| NDT6025-3 | STANDARD | 1 | |
| NDT6025-4 | STANDARD | 1 | |
| NDT6025-5 | STANDARD | 2 | |
| NDT6025-6 | STANDARD | 2 | |
| NDT6027 | STANDARD | 3 | |
| NDT6028 | STANDARD | 3 | |
| NDT6029 | STANDARD | 3 | |
| NDT6030 | STANDARD | 3 | |
| NDT6031-1 | STANDARD | 2 | |
| NDT6031-2 | STANDARD | 2 | |
| NDT6031-3 | STANDARD | 2 | |
| NDT6031-4 | STANDARD | 2 | |
| NDT6032-1 | STANDARD | 2 | |
| NDT6032-2 | STANDARD | 2 | |
| NDT6032-3 | STANDARD | 2 | |
| NDT6032-4 | STANDARD | 2 | |
| NDT6033-1 | STANDARD | 3 | |
| NDT6033-2 | STANDARD | 2 | |
| NDT6038 | STANDARD | 3 | |
| NDT6041 | STANDARD | 3 | |
| NDT6049 | STANDARD | 3 | |
| NDT6050 | STANDARD | 3 | |
| NDT6051 | STANDARD | 3 | |
| NDT6058 | STANDARD | 3 | |
| NDT6059 | STANDARD | 3 | |
| NDT6060 | STANDARD | 3 | |
| NDT6061 | STANDARD | 3 | |
| NDT6063 | STANDARD | 3 | |
| NDT6099 | STANDARD | 2 | |
| NDT614 | STANDARD | 3 | |
| NDT617 | STANDARD | 3 | |
| NDT618 | STANDARD | 3 | |
| NDT618A | STANDARD | 3 | |
| NDT619 | STANDARD | 3 | |
| NDT620 | STANDARD | 2 | |
| NDT621 | STANDARD | 4 | |
| NDT622 | STANDARD | 4 | |
| NDT623 | STANDARD | 3 | |
| NDT624 | STANDARD | 2 | |
| NDT628 | STANDARD | 3 | |
| NDT630 | STANDARD | 3 | |
| NDT642 | STANDARD | 2 | |
| NDT643 | STANDARD | 5 | |
| NDT644 | STANDARD | 4 | |
| NDT648 | STANDARD | 3 | |
| NDT652 | STANDARD | 4 | |
| NDT658 | STANDARD | 2 | |
| NDT660 | STANDARD | 4 | |
| NDT662 | STANDARD | 3 | |
| NDT663A | STANDARD | 3 | |
| NDT663B | STANDARD | 3 | |
| NDT664 | STANDARD | 3 | |
| NDT664A | STANDARD | 2 | |
| NDT664B | STANDARD | 1 | |
| NDT664C | STANDARD | 1 | |
| NDT665B | STANDARD | 1 | |
| NDT666A | STANDARD | 3 | |
| NDT666B | STANDARD | 3 | |
| NDT666C | STANDARD | 3 | |
| NDT667 | STANDARD | 4 | |
| NDT671 | STANDARD | 2 | |
| NDT674 | STANDARD | 3 | |
| NDT675 | STANDARD | 3 | |
| NDT682 | STANDARD | 4 | |
| NDT684 | STANDARD | 3 | |
| NDT685 | STANDARD | 3 | |
| NDT686 | STANDARD | 3 | |
| NDT688 | STANDARD | 3 | |
| NDT690 | STANDARD | 3 | |
| NDT691 | STANDARD | 3 | |
| NDT693 | STANDARD | 3 | |
| NDT694 | STANDARD | 3 | |
| NDT695 | STANDARD | 3 | |
| NDT697 | STANDARD | 3 | |
| NDT698 | STANDARD | 3 | |
| NDT710 | STANDARD | 2 | |
| NDT711 | STANDARD | 2 | |
| NDT725 | STANDARD | 2 | |
| NDT728 | STANDARD | 2 | |
| NDT729 | STANDARD | 1 | |
| NDT730 | STANDARD | 1 | |
| NDT731 | STANDARD | 3 | |
| NDT732A | STANDARD | 2 | |
| NDT733 | STANDARD | 2 | |
| NDT735 | STANDARD | 2 | |
| NDT736 | STANDARD | 1 | |
| NDT737 | STANDARD | 2 | |
| NDT738 | STANDARD | 2 | |
| NDT739 | STANDARD | 2 | |
| NDT740 | STANDARD | 2 | |
| NDT741 | STANDARD | 2 | |
| NDT745 | STANDARD | 2 | |
| NDT746 | STANDARD | 2 | |
| NDT757 | STANDARD | 1 | |
| NDT760 | STANDARD | 2 | |
| NDT761 | STANDARD | 2 | |
| NDT766 | STANDARD | 2 | |
| NDT767 | STANDARD | 2 | |
| NDT768 | STANDARD | 2 | |
| NDT769 | STANDARD | 2 | |
| NDT776 | STANDARD | 2 | |
| PWA104625 | STANDARD | 1 | |
| PWA28403B | STANDARD | 1 | |
| SK601R-10040-1 | STANDARD | 4 | |
| ST4340 | STANDARD | 5 | |
| UT-2370 | STANDARD | 1 | |
| WS-C130M | STANDARD | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| $32 | Hamilton Standard Gun Assembly (Hair Pin Filament) | 3 | |
| (CALIB) 2591553-901 | CALIBRATION SET - STANDARD (CALIBRATION) | 1 | |
| (CALIB) 6283102-1 | CESSNA STANDARD (CALIBRATION) | 1 | |
| (CALIB) 80350A | Standard Peak Power Sensor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 901-14990 | BALANCER/ANALYZER W/ STANDARD ACCESSORIE (CALIBRATION) | 1 | |
| (CALIB) 9339A1 | CALIBRAT CALIBRATION STANDARD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 954-2399 | STANDARD COMPASS FOR COMPASS SWING CALIBRATION (CALIBRATION) | 1 | |
| (CALIB) 981-102 | ANGLE STANDARD (CALIBRATION) | 1 | |
| (CALIB) 98F29003000000 | WRENCHES WRENCHES-STANDARD TORQUE SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L29003002000 | TOOLSET TOOL SET,STANDARD TORQUE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S53005012000 | STANDARD D'ETALONNAGE DU JOINT | 1 | |
| (CALIB) 98S53005013000 | STANDARD D'ETALONNAGE DU JOINT | 1 | |
| (CALIB) 98S53005021000 | STANDARD NDT | 1 | |
| (CALIB) 98S55305011000 | CALIBRATION STANDARD FOR VTP FITTINGS INSPECTION | 1 | |
| (CALIB) 98S57105006200 | CALIBRE STANDARD NDT | 1 | |
| (CALIB) 98S57105009200 | CALIBRE STANDARD NDT | 1 | |
| (CALIB) 98S57105015200 | CALIBRE STANDARD NDT-9941A3 | 1 | |
| (CALIB) 98S57105019200 | CALIBRATION STANDARD FOR NTM 57 14 01 | 1 | |
| (CALIB) 98S57105031200 | CALIBRATION STANDARD FOR SSI 57-12-12 | 1 | |
| (CALIB) 98S57105034200 | CALIBRE STANDARD POUR SSI-57-12-12 | 1 | |
| (CALIB) 98S57205030001 | NDT CALIBRATION STANDARD (CALIBRATION) | 1 | |
| (CALIB) 99A53003001101 | CALIBRATION STANDARD (CALIBRATION) | 1 | |
| (CALIB) 99A53307274000 | Standard Calibration (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A55407291000 | FUNCTION TEST STANDARD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A5540729100010 | FUNCTION TEST STANDARD (CALIBRATION) | 1 | |
| (CALIB) 99A57204436000 | STANDARD STANDARD, REFERENCE - INCLUDING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A57504296000 | REFERENCE STANDARD (CALIBRATION) | 2 | |
| (CALIB) 99D51107295000 | STANDARD STANDARD, CALIBRATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D51407291001 | STANDARD SET, CALIBRATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D54403001002 | REFERENCE STANDARD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F53113002000 | AIRBUS CALIBRATION STANDARD A330-200/300 53-11-55 PAGE 28 FIGURE 53-11-55-013-A. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. (CALIBRATION) | 1 | |
| (CALIB) ADT681-02-CP30-PS*0 | DIGITAL PRESSURE GAUGE STANDARD (CALIBRATION) | 1 | |
| (CALIB) C12-PCS-3C1N | REFERENCE STANDARD COMPOSITE (CALIBRATION) | 1 | |
| (CALIB) CREF5-04174559100 | CONDUCTIVITY REFERENCE STANDARD (CALIBRATION) | 1 | |
| (CALIB) DHC29198-003 | CALIBRATION TEST STANDARD (CALIBRATION) | 1 | |
| (CALIB) EXBD300-50047-001 | CALIBRATION TEST STANDARD (CALIBRATION) | 1 | |
| (CALIB) EXBD400-50040-001 | CALIBRATION STANDARD (CALIBRATION) | 1 | |
| (CALIB) HFSTIN-20PC | 20 PIECE HOLE FINDER (STRAP DUPLICATOR) KIT! INCLUDES ALL FIVE SIZES IN 8-1/2" & 13-1/2" IN STANDARD AND INVERTED STYLES! (CALIBRATION) | 1 | |
| (CALIB) NDT3282 | REFERENCE STANDARD (CALIBRATION) | 2 | |
| (CALIB) NDT3305B | REFERENCE STANDARD (CALIBRATION) | 1 | |
| (CALIB) PSD60-2R | UNIT TEST CARBURANT + STANDARD ACCESSORIES(CABLE 58345 + OPERATION MANUAL) | 2 | |
| (CALIB) PTS-2 | Precision Transfer Standard (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SRS-0824A | SRS, SURFACE REFERENCE STANDARD (CALIBRATION) | 1 | |
| (CALIB) SS-5A | Synchro Standard (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TEK-SWREF1 | COMPOSITE STANDARD (CALIBRATION) | 1 | |
| . | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 PAGES 6-9. MATERIAL: 2024-T3 ALCLAD ALUMINUM. SINGLE DOUBLER CONFIGURATION. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE...SKIN THICKNESS = .080"..DOUBLER = .098"..FILLER = .080"..STRINGER = .063" | 1 | |
| 0 PPM | CALIBRATING OIL STANDARD 2 | 1 | |
| 001U532A5100000 | DORNIER 328/328 JET SE.4.48A CALIBRATION STANDARD Part 4 53-21-23 Page 11 Figure 407 Includes Test Report and Certificate of Conformance. | 1 | |
| 00460-062-000 | STANDARD ADAPTER FOR TRIPOD JACK | 1 | |
| 0061R7834 | STANDARD TEST ARM AND BLADE ASSEMBLY | 1 | |
| 01-0507-0000 | TRONAIR ATA-9 Standard Towbar Head, 20-1/2 in L, 10-5/8 in W, 4 in H, Steel, Blue | 2 | |
| 01-0515-0000 | TRONAIR ATA-9 Standard Towbar Head, 16-3/16 in L, 6-1/4 in W, 4 in H, Steel, Blue | 5 | |
| 01-0545-0011 | TRONAIR ATA-9 Standard Towbar Head, 23-3/4 in L, 29.6 in W, 4 in H, Steel, Blue | 5 | |
| 01-0546-0000 | TRONAIR ATA-9 Standard Towbar Head, 26-1/4 in L, 37-1/8 in W, Steel, Powder-Coated | 4 | |
| 01-0556-0000 | TRONAIR ATA-9 Standard Towbar Head, 27-3/4 in L, 24.8 in W, 6 in H, Steel, Blue | 2 | |
| 01-0558-0000 | TRONAIR ATA-9 Standard Towbar Head, 3.74 in L, 20.64 in W, 4.27 in H, Steel, Blue | 6 | |
| 01-0576-0000 | TRONAIR ATA-9 Standard Towbar Head, 13-5/8 in L, 6-1/4 in W, 4 in H, Steel, Blue | 6 | |
| 01-0577-0010 | TRONAIR ATA-9 Standard Towbar Head, 28-1/4 in L, 29-5/8 in W, 7-3/8 in H, Steel, Blue | 1 | |
| 01-0577-0020 | TRONAIR ATA-9 Standard Towbar Head, 28-1/4 in L, 29-5/8 in W, 7-3/8 in H, Steel, Blue | 2 | |
| 01-0590-0000 | TRONAIR ATA-9 Standard Towbar Head, 20-1/4 in L, 9.06 in W, 4 in H, Steel, Blue | 9 | |
| 01-0599-0010 | TRONAIR ATA-9 Standard Towbar Head, 31 in L, 31 in W, 4 in H, Steel, Powder-Coated | 2 | |
| 01-0601-0000 | TRONAIR ATA-9 Standard Towbar Head, 23-1/4 in L, 6-1/4 in W, 4 in H, Steel, Blue | 3 | |
| 01-0602-0000 | TRONAIR ATA-9 Standard Towbar Head, 24-15/16 in L, 8-7/8 in W, 4-5/8 in H, Steel, Blue | 3 | |
| 01-0605-0000 | TRONAIR ATA-9 Standard Towbar Head, 27-1/16 in L, 31-1/2 in W, 6-1/16 in H, Steel | 4 | |
| 01-0612-0000 | TRONAIR ATA-9 Standard Towbar Head, 23-1/2 in L, 8 in W, 4-1/2 in H, Steel, Blue | 3 | |
| 01-1201-0010 | TOWBAR STANDARD MULTI HEAD | 14 | |
| 01-1202-0000 | Towbar, Standard Multi-Head (CE) | 13 | |
| 01-1270-0010 | Towbar, Standard Multi-Head (CE) | 7 | |
| 01-1950-5000 | Telecoupler, Standard | 5 | |
| 01473656400/10 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 019 | BOEING REFERENCE STANDARD 7075-T6 ALUMINUM 7075 57-10-07 PART 6 PG.216. | 1 | |
| 01A1201-0010 | TRONAIR ATA-9 Standard Multi-Head Towbar, 4 in Tube Dia, 127 in L, 22 in W, 7-3/4 in H | 2 | |
| 02-285-1 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-10 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-2 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-3 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-4 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-5 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-6 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-7 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-8 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-9 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-1 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-10 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-11 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-12 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-13 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-14 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-17 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-2 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-20 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-21 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-22 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-23 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-24 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-3 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-4 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-5 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-6 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-7 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-8 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-9 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-441 | STANDARD MS COUNTERSINK 1/4-28 THREAD | 3 | |
| 02-441FBACR15FT | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) | 1 | |
| 02-441FBACR15FT-1 | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") | 1 | |
| 02-441SBACR15FT | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") | 1 | |
| 02-441SBACR15FT-1 | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") | 1 | |
| 022-510-404 | USM GO STANDARD DMS GO AD | 1 | |
| 026T018B | CALIBRATION STANDARD FOR YOKE | 1 | |
| 02C7019 | REFERENCE STANDARD OLYMPUSCONDSTD | 1 | |
| 038 | BOEING 707 REFERENCE STANDARD 2024-T3 ALUMINUM DETAIL 1 FIGURE 8 SHEET 7 BBL 70.5 SPLICE 707-300/400..PART 6, 57-30-07 PG.71 | 1 | |
| 0381-1928 | ATTACHMENT, STANDARD CUTTING 90 DEG. HEAD ANGLE, , MODEL NO. CA2460 WITH CUTTING ATTACHMENT ,MNF, VICTOR. | 1 | |
| 039 | BOEING 707 REFERENCE STANDARD 2024-T3 ALUMINUM DETAIL 3 FIGURE 8 SHEET 9 BBL 70.5 SPLICE 707-300/400..PART 6, 57-30-07 PG.73 | 1 | |
| 04-401 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-401-1 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-401-4 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-405 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-405-1 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-405-4 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-410 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-410-4 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-415 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-415-4 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-420 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-421 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-430 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-435 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-440 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-62 | SHEET METAL FASTENER PLIERS ( TYPE: STANDARD ) | 2 | |
| 04-63 | SHEET METAL FASTENER PLIERS TYPE: STANDARD ADD | 1 | |
| 04-CBX-3/32 | CBX STANDARD TEMP. FASTENER DIA.=3/32" GRIP=0-1/2" | 1 | |
| 04-CBXEL-1/4 | CBX STANDARD TEMP. FASTENER DIA.=1/4" GRIP=0.5-1.5" | 1 | |
| 04-CBXEL-1/8 | CBX STANDARD TEMP. FASTENER DIA.=1/8" GRIP=0.5-1.5" | 1 | |
| 04-CBXEL-3/16 | CBX STANDARD TEMP. FASTENER DIA.=3/16" GRIP=0.5-1.5" | 1 | |
| 04-CBXK-1/8 | CBX STANDARD TEMP. FASTENER DIA.=1/8" GRIP=1.5-2.5" | 1 | |
| 04-CBXL-3/16 | CBX STANDARD TEMP. FASTENER DIA.=3/16" GRIP=0-1" | 1 | |
| 04-HNX-3/32IN | WEDGELOCK FASTENER - 3/32 HEX BODY FASTENER (NUT TYPE; STANDARD SIZE) | 1 | |
| 04-K380 | TELESCOPING DEBURR TOOLS ( TYPE: STANDARD ) | 1 | |
| 04-M-1/4 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: 1/4" )( MATERIAL CAPACITY: 0 TO 5/16" )( TYPE: M TYPE STANDARD ) | 2 | |
| 04-M-1/8 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: #30 )( MATERIAL CAPACITY: 0 TO 1/4" )( TYPE: M TYPE STANDARD ) | 2 | |
| 04-M-3/16 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: #10 )( MATERIAL CAPACITY: 0 TO 1/4" )( TYPE: M TYPE STANDARD ) | 1 | |
| 04-M-3/32 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: #40 )( MATERIAL CAPACITY: 0 TO 1/4" )( TYPE: M TYPE STANDARD ) | 1 | |
| 04-M-5/32 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: #20 )( MATERIAL CAPACITY: 0 TO 1/4" )( TYPE: M TYPE STANDARD ) | 2 | |
| 04-MD10 | IRWIN® Standard Tinner Snips (Cut length: 2-3/4") (Overall length: 10" (254 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-MD12 | IRWIN® Standard Tinner Snips (Cut length: 2-3/4") (Overall length: 10" (254 mm)) (Add to cart: Add To Cart) (Cut length: 3-1/4") (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-MD7 | IRWIN® Standard Tinner Snips (Cut length: 2-3/4") (Overall length: 10" (254 mm)) (Add to cart: Add To Cart) (Cut length: 3-1/4") (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: 2") (Overall length: 7" (178 mm)) (Add to cart: Add To | 1 | |
| 07B10123 | REFERENCE STANDARD OLYMPUSCONDSTD | 1 | |
| 0880000-2 | Cessna Standard Inconel 601 .050" thick 2.5" x 2.5" | 1 | |
| 0880000-3 | Cessna Standard 301 SS Full Hard .050" thick 2.5" x 2.5" | 2 | |
| 0880000-4 | Cessna Standard 321 SS .018" thick 2.5" x 2.5" | 2 | |
| 0880000-5 | Cessna Standard 321 SS .063" thick 2.5" x 2.5" | 2 | |
| 09A8293 | REFERENCE STANDARD OLYMPUSCONDSTD | 1 | |
| 0E X18B | WRENCH, COMBINATION, STANDARD LENGTH, 9/16IN, 12-POINT | 3 | |
| 0EX24B | WRENCH, COMBINATION, STANDARD L 3/4 | 5 | |
| 0EX26B | WRENCH, COMBINATION, STANDARD 13/16 | 4 | |
| 0EX28B | WRENCH, COMBINATION, STANDARD 13/16" | 4 | |
| 1-1 | 90° "Midget" Drilling Attachment - Standard Duty - MADE IN USA! | 1 | |
| 1-899-15 | SECONDARY STANDARD SENSOR | 1 | |
| 10 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 10-0109-00 | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601, INCONEL 718, 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. | 2 | |
| 10-04230 | STANDARD COMPASS | 1 | |
| 10-1-N | COLD WORKING TOOL STANDARD | 3 | |
| 10.801.039 | VACLAV 2 AIRCRAF WASTE LINE DESCALING GROUND SUPPORT UNIT WITH STANDARD EQUIPMENT | 1 | |
| 100 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 101-00401 | Barfield Standard Lead Package, For Model 2548H Fuel Quantity Tester | 4 | |
| 101-388014-1 | ACTUATOR STÁNDARD GEAR | 1 | |
| 102-3120 | STANDARD TOOLS TENSIOMETER | 1 | |
| 10212-0501A | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501B | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501C | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501D | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501E | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501F | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501G | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 10212-0501H | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501J | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501K | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501L | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 1030-1 | STANDARD FLUSH SETS | 3 | |
| 1030-2 | STANDARD FLUSH SETS | 3 | |
| 1030-3 | STANDARD FLUSH SETS | 4 | |
| 10902001-00-C | STANDARD WORKSTATION SINK PACKAGE 230V | 1 | |
| 1091K2 | GREASE-DISPENSING TIP FOR STANDARD GREASE FITTINGS, 1-1/2" LONG, NPSF THREAD | 1 | |
| 10L16-4.96X2-A00-P-2.5-OM | STANDARD PHASED-ARRAY PROBE, 10 MHZ LINEAR ARRAY, 16 ELEMENTS, 0.012 IN. (0.31MM) PITCH (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| 10L16-A00 | STANDARD PHASED-ARRAY PROBE, 10 MHZ LINEAR ARRAY, 16 ELEMENTS, 0.012 IN. (0.31MM) PITCH (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| 10L64-38.4X7-A2-P-2.5-OM | STANDARD PHASED ARRAY PROBE-U8330658 | 1 | |
| 10RS-52-2-MLG-FTG-AF | MD-10 REFERENCE STANDARD FIGURE 1.3, SHEET 1&2. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.01.1 | BOEING REFERENCE STANDARD KC10 Page 1-6 MATERIAL: 2024-T3, 7075-T6, 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.02 | BOEING REFERENCE STANDARD KC10 53.10.001, 53.10.013/.014 Page 1-8 Material: 2024-T3 and 7075-T6, 6AL-4V or Phenolic. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.05 | DC-10 REFERENCE STANDARD 53.10.025, 53.10.028, 53.10.030. Page 1-5. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.08 | DC-10 REFERENCE STANDARD 55.10.003/.004 Page 1-12. Material: 7075-T6 and 6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| 10RS.10.1 | DC-10 REFERENCE STANDARD 55.10.005/.006 Page 1-3. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 2 | |
| 10RS.15a | DC-10 SID REFERENCE STANDARD DETAILS -3,-5 & -7 PAGE 1-6. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. | 1 | |
| 10RS.15b | DC-10 SID REFERENCE STANDARD DETAILS -3,-5, & -5, -501 ASSEMBLY PAGE 1-6. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. | 1 | |
| 10RS.15c | DC-10 SID REFERENCE STANDARD DETAILS -7, -9 & -11, -503 ASSWMBLY PAGE 1-6. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. | 1 | |
| 10RS.17 | DC-10 SID REFERENCE STANDARD DETAIL -3 & -5 PAGE 2-3. MATERIAL: 2024-T3 ALUMNIUM. Includes Certification Report and COC. | 1 | |
| 10RS.17.1 | DC-10 SID REFERENCE STANDARD DETAIL -3 & -5 PAGE 2-3. MATERIAL: 2024-T3 ALUMNIUM. Includes Certification Report and COC. | 1 | |
| 10RS.21 | DC-10 REFERENCE STANDARD DETAIL -1 PAGE 1. MATERIAL: 718 INCONEL. Includes Test Report and Certificate of Conformance. | 2 | |
| 10RS.22a | DC-10 REFERENCE STANDARD 54-10-029/.030 Page 1-2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| 10RS.23 | DC-10 SID REFERENCE STANDARD 54.10.029/.030. DETAIL -1 SHEET 1 PAGE 1. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 10RS.25a | DC-10 SID REFERENCE STANDARD 57.10.029/.030. DETAIL -3 PAGE 1. MATERIAL: 7075-T7 ALUMNIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.25b | DC-10 SID REFERENCE STANDARD DETAIL -1 PAGE 1. MATERIAL: 7075-T7 ALUMNIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.25c | DC-10 SID REFERENCE STANDARD DETAIL -5 PAGE 1. MATERIAL: 7075-T7 ALUMNIUM. includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.26.1BM | DOUGLAS DC-10 REFERENCE STANDARD 54.10.031/.032 PAGES 1-8 (SHEET1-8). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| 10RS.26.1bM | DOUGLAS DC-10 REFERENCE STANDARD 54.10.031/.032 PAGES 1-8 (SHEET1-8). Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.27b | DC-10 SID REFERENCE STANDARD DETAILS -7,-9 & -11 PAGE 1-6. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. | 1 | |
| 10RS.32 | DC-10 REFERENCE STANDARD 54-10-027 Page 1-2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.33a | DC-10 REFERENCE STANDARD 54-10-027 Page 1-2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.33b | DC-10 REFERENCE STANDARD 54-10-027 Page 1-2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.36a | DC-10 REFERENCE STANDARD DETAIL RA11005-12-1, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027 | 1 | |
| 10RS.36aN | DC-10 REFERENCE STANDARD DETAIL RA11005-12-1, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027 | 1 | |
| 10RS.36b | DC-10 REFERENCE STANDARD DETAIL RA11005-12-2, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027 | 1 | |
| 10RS.36bN | DC-10 REFERENCE STANDARD DETAIL RA11005-12-2, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027. | 1 | |
| 10RS.39.1 | DC-10 SID REFERENCE STANDARD DETAIL -1, -3 & -5 PAGE 1-5. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. | 1 | |
| 10RS.43 | DC-10 REFERENCE STANDARD PAGE 1. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.47 | MD-11 Eddy current reference standard Section 2-1 Page 1 Figure 1.21 | 1 | |
| 10RS.48 | BOEING REFERENCE STANDARD - KC10. Page 1-23. Material: 2024-T3, 7075-T6, and 7150-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.50 | DOUGLAS DC-10 REFERENCE STANDARD 54.10.031/.032 PAGES 1-5 (SHEET1-5). Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.51-MLG-FTG-FF | MD-10 REFERENCE STANDARD FIGURE 1.1, SHEET 1&2. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.52-1-MLG-FTG-AF | MD-10 REFERENCE STANDARD FIGURE 1.2, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.53-1-MLG-FTG-CC-UPR | MD-10 REFERENCE STANDARD FIGURE 1.4, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.53-2-MLG-FTG-AA | MD-10 REFERENCE STANDARD FIGURE 1.5, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.53-3-MLG-FTG-DD | MD-10 REFERENCE STANDARD FIGURE 1.6, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.bN | DC-10 REFERENCE STANDARD DETAIL RA11005-12-2, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027 | 1 | |
| 11-01-0097 | Hand Crimp Tool for 2.36mm Diameter, Standard .093" Pin and Socket Crimp Terminal, 22-24 AWG | 1 | |
| 110-001100200 | CHAVE AJUSTAVEL STANDARD ACO LIGA 23,0MM 8 | 1 | |
| 110TMDY | 1/4 STANDARD SOCKET SET 3/16" - 9/16" | 4 | |
| 111502-1 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (STANLEY) | 1 | |
| 111515-1 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (STANLEY) | 1 | |
| 1123000-550 | STRETCHER - STANDARD 787 MODEL | 1 | |
| 11260001_STAH | Ratchet, HY-LOK, Standard Handle, 4 7/16" | 1 | |
| 113-126-660 | STANDARD REFERENCE : NDT3322A | 1 | |
| 1159SST261 | CALIBRATION STANDARD (NDT) | 1 | |
| 118-440-050 | STANDARD REFERENCE : NDT3322A | 1 | |
| 118-540-270 | REFERENCE STANDARD V2 - AÇO | 1 | |
| 118-540-400 | STANDARD BLOCK ;SPECIFICATION: V1 ;CRACK SIZE: 1 MM | 1 | |
| 120A | STANDARD RIVET SET MIX | 1 | |
| 12245-011-001 | ULTRASONIC CALIB.STANDARD LEAR 45 NTM 57-30-05 | 1 | |
| 12345-040-001 | EC CALIBRATION STANDARD LEAR 45 NTM 55-10-05 | 2 | |
| 124B | OSCILLOSCOPE – PORTABLE - STANDARD KIT, NO SOFTWARE | 1 | |
| 125/H-20 | AMM CH 20 STANDARD PRACTICES-AIR FRAME | 1 | |
| 125A | CASA Standard 51-30-02 PT 1 PG 6 | 1 | |
| 127-0.032 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.036 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.040 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.050 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.063 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.071 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.080 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.090 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.100 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.110 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.125 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0_080 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| 127-0_090 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| 127-0_110 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| 127-0_125 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| 127-XXX | Corrosion reference standard Calibration Block | 1 | |
| 127-_080 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| 127-_090 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| 127-_110 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| 127-_125 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| 127A | BOEING REFERENCE STANDARD - 0.032” AL | 1 | |
| 127A-.032 | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 2 | |
| 127A-.036 | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127A-.040 | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127A-.050 | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127A-.063 | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127A-.072 | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127A-.080 | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127A-.090 | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127A-.100 | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127A-.110 | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127A-.125 | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127B | CASA Standard 51-30-06 PT1 PG 5 | 1 | |
| 12S1283-02 | DOCTO® ADJUSTABLE DEPTH CONTROL SAWS STANDARD MODE | 2 | |
| 13-3022 | Bowers 13-3022 Standard Tracer SH Smallest Bore Dia 8mm Max. Measuring Depth 27mm Included in the Delivery | 1 | |
| 13-3030 | Bowers 13-3030 Standard Tracer Extension 100mm | 1 | |
| 130-.350 | BOEING GLASS THICKNESS STANDARD TEST BLOCK | 1 | |
| 130A | BOEING THICKNESS STANDARD FOR X-BAND RADOMES DETAIL IV 737 PT 6 53-50-00. MATERIAL: LUCITE. Includes Test Report and Certificate of Conformance. | 2 | |
| 130B | BOEING THICKNESS STANDARD FOR C-BAND RADOMES DETAIL V 737 PT 6 53-50-00. MATERIAL: LUCITE. Includes Test Report and Certificate of Conformance. | 2 | |
| 130C | BOEING REFERENCE STANDARD Part 6 53-50-00 Page 13 Figure 1. Material: Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 131681AJ14-9 | WIRE,ELECTRICAL, STANDARD 14 AWG WIRE | 1 | |
| 13216-4 | EASA STANDARD TOOL BOX, MAKE STAHLWILLE | 1 | |
| 13A-5/16 | COMBINATION WRENCH,STANDARD LENGTH, 5/16, 12PT | 1 | |
| 1402B80 | "PUMP - VACUUM, PORTABLE, STANDARD DUTY | 1 | |
| 1409-00-2 | KIT REFERENCE STANDARD NDI- TORQUE BOX. NDI WING ASSY. | 11 | |
| 1440-04 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1440-06 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1441-4 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1442-04 | HELICOIL STANDARD INSERT 2B THREAD | 2 | |
| 1442-06 | HELICOIL STANDARD INSERT 2B THREAD | 2 | |
| 1442-2 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1443-2 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1443-3 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1443-4 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1443-5 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1443-6 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 145-15998-001 | EMBRAER REFERENCE STANDARD 54-50-00 FIG 603, 4340 STEEL | 4 | |
| 145-4413-0058 | REFERENCE STANDARD TITANIUM | 1 | |
| 145-44130-401 | KIT REFERENCE STANDARD NDI- TORQUE BOX. NDI WING ASSY. | 3 | |
| 145-44131-001 | EMBRAER REFERENCE STANDARD 57-26-00 PT 2 FIG 601, Aluminum(7050-T745) Includes Test Report and Certificate of Conformance. | 6 | |
| 145-44131-003 | EMBRAER REFERENCE STANDARD 57-26-00 PT 2 FIG 601, Steel(15-SPH 5/8") Includes Test Report and Certificate of Conformance. | 3 | |
| 145-44131-005 | EMBRAER REFERENCE STANDARD 57-26-00 PT 2 FIG 601, Titanium(Titanium Galy US AMS2631 CLAI 1/2") Includes Test Report and Certificate of Conformance. | 3 | |
| 145-54-0008 | EMBRAER REFERENCE STANDARD 54-50-00 FIG 606, 4340 STEEL | 1 | |
| 145T09065-401 | REFERENCE STANDARD FOR FASTENER | 1 | |
| 14H-45 | CONTACT TIPS - STANDARD THREADED STYLE 1.2 MM | 1 | |
| 15 STEPS WEB KIT WITH STEP 0.6MM | CALIBRATION STANDARD (KIT) | 1 | |
| 15-3046 | Standard Wire Pull Grip for MPT-250C | 2 | |
| 15-5 PH | CALIBRATION REFERENCE STANDARD 15-5 PH | 1 | |
| 15-5PH | CALIBRATION REFERENCE STANDARD 15-5 PH STAINLESS S | 1 | |
| 15-628-2 | Filter - Regulator - Lubricator Mini Assemblies (Type: Mini Assemblies) (Pipe size: 1/8") (Add to cart: Add To Cart) (Type: Mini Assemblies) (Pipe size: 1/4") (Add to cart: Add To Cart) (Type: Standard Assemblies) (Pipe size: 1/4") (Add to cart: Add To Ca | 1 | |
| 15-628-3 | Filter - Regulator - Lubricator Mini Assemblies (Type: Mini Assemblies) (Pipe size: 1/8") (Add to cart: Add To Cart) (Type: Mini Assemblies) (Pipe size: 1/4") (Add to cart: Add To Cart) (Type: Standard Assemblies) (Pipe size: 1/4") (Add to cart: Add To Ca | 1 | |
| 15-628-4 | Filter - Regulator - Lubricator Mini Assemblies (Type: Mini Assemblies) (Pipe size: 1/8") (Add to cart: Add To Cart) (Type: Mini Assemblies) (Pipe size: 1/4") (Add to cart: Add To Cart) (Type: Standard Assemblies) (Pipe size: 1/4") (Add to cart: Add To Ca | 1 | |
| 15-E35+ | Bowers 15-E35+ ACCRETECH HandySurf + Portable Surface Measurement Standard Unit with 5µm Stylus | 1 | |
| 15-E35/2+ | Bowers 15-E35/2+ ACCRETECH HandySurf + Portable Surface Measurement Standard Unit with 2µm Stylus | 1 | |
| 150-060 | CANOPY/ENGINE COVER (standard canopy cover type) | 1 | |
| 150-830 | TRAVEL COVER, Light Weight Travel Canopy/Engine Cover (standard canopy cover type) | 1 | |
| 15F2716 | TOWBAR - 737 - 16 FT LONG - NO LIFTING UNDERCARRIAGE - CLAMP STYLE HEAD (2713) STANDARD - EXPANDING PIN TYPE HEAD (2491) OPTIONAL | 5 | |
| 15−5 PH | Calibration reference standard 15−5 PH stainless steel containing 0.008 in. (0.20 mm)0.020 in. (0.51 mm) and 0.040 in. (1.02 mm) deep electrical discharge machined notches (Bombardier Inc. or equivalent) | 1 | |
| 1688-04 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 17-1XSP | USATCO RIVET GUNS ( BLOWS PER MINUTE: 3600 )( CAPACITY (ALUMINUM - STEEL): 1/8" ALUMINUM )( OVERALL LENGTH: 5-11/16" (145 MM) )( TYPE: STANDARD .401 SHANK ) | 1 | |
| 17-3XSP | USATCO RIVET GUNS ( BLOWS PER MINUTE: 2160 )( CAPACITY (ALUMINUM - STEEL): 3/16" - 5/32" )( OVERALL LENGTH: 7-5/16" (186 MM) )( TYPE: STANDARD .401 SHANK ) | 1 | |
| 17-4XSP | USATCO RIVET GUNS ( BLOWS PER MINUTE: 1740 )( CAPACITY (ALUMINUM - STEEL): 1/4" - 3/16" )( OVERALL LENGTH: 8-5/16" (211 MM) )( TYPE: STANDARD .401 SHANK ) | 2 | |
| 17-9XBSP | USATCO RIVET GUNS STANDARD .498 SHANK | 1 | |
| 170A.18 | STANDARD MULTIGRIP PLIERS 30MM | 1 | |
| 170A.30 | STANDARD MULTIGRIP PLIERS 55MM | 1 | |
| 171-00844-601 16E1 | EMBRAER REFERENCE STANDARD 7075-T7 ALUMINUM.Includes Test Report and Certificate of Conformance. | 1 | |
| 171T17969-401 | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-10-00 pages 4-11. Includes Test Report and Certificate of Conformance. | 3 | |
| 171T17973-401 | CALIBRATION STANDARD - CALIBRATE EDY CURRENT INSTR | 4 | |
| 175-00215 | CABLE STANDARD LEADS | 4 | |
| 17M46 | STANDARD WINDOWS HANDLING TOOL | 1 | |
| 17P9M2007 | Douglas Reference Standard Assembly For the Ultrasonic Calibration of Upper Wing Skin to common Stringer, Figure24-4 sheets 253. Material: 7075 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 17TES0078 | AVIATION CABLE (STANDARD REEL/ROLL | 9 | |
| 182-511-10 | STANDARD SCALE | 1 | |
| 182-534-10 | MITUTOYO WORKING STANDARD SCALE, 1000MM RANGE, 1MM GRAD | 1 | |
| 186A | BOEING REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.1875. Includes Test Report and Certificate of Conformance. | 3 | |
| 186ABCDEF | BOEING CUSTOM COMBINATION REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.1875", .2500", .3125", .3750", .4375", .500. Each hole size marked with the corresponding Boeing Part number 186A-186F Includes Test Report and Certific... | 1 | |
| 186B | BOEING REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.2500. Includes Test Report and Certificate of Conformance. | 3 | |
| 186C | BOEING REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.3125. Includes Test Report and Certificate of Conformance. | 4 | |
| 186D | BOEING REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.3750. Includes Test Report and Certificate of Conformance. | 4 | |
| 186E | BOEING REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.4375. Includes Test Report and Certificate of Conformance. | 4 | |
| 186F | BOEING REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.5000. Includes Test Report and Certificate of Conformance. | 3 | |
| 186G | BOEING STANDARD 737/747 PT6 51-00-00 PROCEDURE 1 PG5 FIG2, .563 DIAMETER HOLE | 2 | |
| 186H | BOEING STANDARD 737/747 PT6 51-00-00 PROCEDURE 1 PG5 FIG2, .625 DIAMETER HOLE | 2 | |
| 186J | BOEING STANDARD 737/747 PT6 51-00-00 PROCEDURE 1 PG5 FIG2, .750 DIAMETER HOLE | 2 | |
| 188A | Reference Standard 188A | 5 | |
| 189A | Boeing Standard 737 51-00-00 Part 6 Figure 4 | 1 | |
| 19-4301-0000 | POTABLE WATER CART, STANDARD (100 | 9 | |
| 19-4305-0000 | CART, POTABLE WATER CART, STANDARD (31 GAL/117 L) FILL RESERVOIR (Œ) | 10 | |
| 1920166 (NRK-3AL) | REFERENCE STANDARD ALUMINUM 7075 | 1 | |
| 1920167 (NRK-3T) | REFERENCE STANDARD TITANIUM (HOLES) | 1 | |
| 1920168 (NRK-3ST) | REFERENCE STANDARD 4340 STEEL | 1 | |
| 20 | AMERICAN STANDARD WIRE GAUGE | 3 | |
| 23 | Tesa 00510041 Standard models Vernier Calipers 0-150mm | 1 | |
| 125 | BOEING REFERENCE STANDARD 767 PT 6 -51-00-05 FIG 2 PAGE 6 & 737 pART 6 51-00-00 FIGURE 2 PAGE 6 DETAIL II. HOLE SIZES: 0.1875, 0.250, 0.3125, 0.375, 0.4375, 0.500. Material: 4130 or 4340 Cres Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| 126 | Reference Standard 126 | 7 | |
| 128 | BOEING REFERENCE STANDARD 767 PT 6 51-00-06 PAGE 4 FIGURE 1, MATERIAL: Aluminum Alloy. Includes Test Report and Certificate of Conformance. | 1 | |
| 134 | Boeing Reference Standard 707 Part 4 53-40-07 Page 12 Figure 2 (Sheet 6) Detail 3. Material: 4330M or Equivalent. Includes Test Report and Certificate of Conformance. | 4 | |
| 181 | BOEING REFERENCE STANDARD 707 PART 6 55-10-07 PAGE 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 182 | BOEING REFERENCE STANDARD 707 PART 6 55-10-07 PAGE 17. Includes Test Report and Certificate of Conformance. | 1 | |
| 185 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG 13 & 777-200/300 51-00-04 PROCEDURE 1 PAGE 8. Includes Test Report and Certificate of Conformance. | 2 | |
| 189 | BOEING REFERENCE STANDARD PT 6 51-00-01 FIG 4 PG.13 & 737 PT 6 51-00-00 PROCEDURE 23 PG.11 FIG.7. Includes Test Report and Certificate of Conformance. | 7 | |
| 192 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG 13. Includes Test Report and Certificate of Conformance. | 4 | |
| 194 | BOEING REFERENCE STANDARD 737 PT 6 53-30-00 FIGURE 1., BOEING 757 PART 6 53-30-02 PAGE 5 FIGURE 2 | 9 | |
| 194A | BOEING REFERENCE STANDARD 767 PT 6 53-30-02 FIG 3 PAGE 5. Includes Test Report and Certificate of Conformance. | 4 | |
| 194B | REFERENCE STANDARD NDT | 1 | |
| 194C | STANDARD SAMPLE | 1 | |
| 198 | Reference Standard 198 | 1 | |
| 2-1522 | PIN PROTRUSION GAUGES ( TYPE: HI-LOK STANDARD ) | 2 | |
| 2-1522-B | PIN PROTRUSION GAUGES TYPE: HI-LOK STANDARD ADD | 2 | |
| 2-1522HST-B | PIN PROTRUSION GAUGES TYPE: HI-LOK STANDARD ADD | 1 | |
| 2-164-501 | Surface Standard with .2, .5, 1mm Notches, 4340 Steel | 4 | |
| 2-164-551 | REFERENCE STANDARD BLOCK | 2 | |
| 2-164-551-2024T3 | Surface Standard with .2, .5 1mm Notches, 2024T3 | 1 | |
| 2-835-01-9301 | Surface Standard with .2, .5, 1mm Notches, 304 Stainless | 2 | |
| 2-835-01-9330 | Surface Standard with .2, .5, 1mm Notches, 6AL4V Titanium | 2 | |
| 2-887-01-931-6S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-931-9S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-9313S | CALIBRATION STANDARD - SPLIT - CONICAL | 6 | |
| 2-887-01-9314S | CALIBRATION STANDARD - SPLIT - CONICAL | 5 | |
| 2-887-01-9315S | CALIBRATION STANDARD - SPLIT - CONICAL | 4 | |
| 2-887-01-9316S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-9319S | SPLITTED CONICAL CALIBRATION STANDARD IN 6AL-4V Titanium TYPE SCCS3-7, A318/A319/A320/A321 51-63-06-991-002A. Includes Test Report and Certificate of Conformance. | 3 | |
| 2-887-01-932-1S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-932-3S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-932-5S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-9321S | SPLITTED CONICAL CALIBRATION STANDARD IN 6AL-4V Titanium..TYPE SCCS3-7, A318 51-63-07-991-002A. Includes Test Report and Certificate of Conformance. | 3 | |
| 2-887-01-9323S | SPLITTED CONICAL CALIBRATION STANDARD IN 6AL-4V Titanium..TYPE SCCS3-7, A318 51-63-07-991-002A. Includes Test Report and Certificate of Conformance. | 3 | |
| 2-887-01-9325S | SPLITTED CONICAL CALIBRATION STANDARD IN 6AL-4V Titanium..TYPE SCCS3-7, A318 51-63-07-991-002A. Includes Test Report and Certificate of Conformance. | 3 | |
| 2-887.01-93145 | CALIBRATION STANDARD SPLIT | 1 | |
| 2044A | MITUTOYO 2044S STANDARD DIAL INDICATOR 5MM (1MM) | 1 | |
| 2044K44 | STANDARD FLEXIBLE EXTENSION HOSE 36" LENGTH (GREASE GUN HOSE) | 1 | |
| 2044S | Mitutoyo 2044S Standard Dial Indicator 5mm (1mm) | 1 | |
| 2044S-60 | Mitutoyo 2044S-60 Standard Dial Indicator 5mm (1mm) | 1 | |
| 2045S | Mitutoyo 2045S Standard Dial Indicator 5mm (1mm) | 1 | |
| 2046S | Mitutoyo 2046S Standard Dial Indicator 10mm (1mm) | 4 | |
| 2046S-60 | Mitutoyo 2046S-60 Standard Dial Indicator 10mm (1mm) | 1 | |
| 2047S | Mitutoyo 2047S Standard Dial Indicator 10mm (1mm) | 1 | |
| 2052S-19 | MITUTOYO STANDARD TYPE DIAL INDICATOR SERIES 2 | 1 | |
| 206 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 19. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD14)Includes Test Report and Certificate of Conformance. | 3 | |
| 208 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 19. MATERIAL 2024 ALUMINUM (FASTENERS: BACB30PT5-10, BACN10TN5)Includes Test Report and Certificate of Conformance. | 2 | |
| 208 FRONT SPAR | CESSNA / TEXTRON AVIATION EDDY CURRENT REFERENCE STANDARD 208 FRONT SPAR LOWER CAP. Drawing NO. 2683201 | 1 | |
| 208 REAR SPAR | CESSNA / TEXTRON AVIATION EDDY CURRENT REFERENCE STANDARD 208 REAR SPAR LOWER CAP. Drawing NO. 2683202 | 1 | |
| 208-104 | ENGINE INLET PLUGS, Standard Aero Mod (set of 2) | 1 | |
| 208-106 | EXHAUST PLUG, STANDARD FAIRING | 1 | |
| 208EFAY | STANDARD HEX BIT SOCKET SET | 2 | |
| 208EFTABY | STANDARD BALL HEX BIT SOCKET SET | 1 | |
| 208FRDH | 8 PC 3/8" DRIVE STANDARD TORQUE ADAPTOR SET (5/16" - 3/4") | 1 | |
| 210EFTAMY | DRIVE METRIC STANDARD HEX BIT SOCKET SET | 1 | |
| 212-A1325-01 | AIRBUS MILITARY REFERENCE STANDARD COM 212-266 PG 13 | 1 | |
| 2124S-10 | Mitutoyo 2124S-10 Standard Dial Indicator 5mm (0.5mm) | 1 | |
| 212EFTAY | 12 PC COMBINATION DRIVE SAE STANDARD HEX DRIVER BIT SOCKET SET (1/16-3/8" | 4 | |
| 212EFTXY | 12 PIECE TORX BIT COMBO UNIT STANDARD SOCKET SET | 2 | |
| 2200ST | STANDARD HEIGHT STEPS | 1 | |
| 22112943-007 | 22112943-007;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM FC/PC | 1 | |
| 2285/90.02 | 2285/90.02;Standard Stereo Headset with Volume Control | 1 | |
| 23-55ST | CALIBRATION STANDARD TEST SET | 1 | |
| 230 | STANDARD FEELER GAUGE SETS | 6 | |
| 2310S-10 | Mitutoyo 2310S-10 Standard Dial Indicator 10mm (1mm) | 1 | |
| 2358S-10 | Mitutoyo 2358S-10 High Resolution Standard Dial Indicator .5" (.01") | 1 | |
| 239 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 18. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD)Includes Test Report and Certificate of Conformance. | 1 | |
| 240 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 18. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD)Includes Test Report and Certificate of Conformance. | 1 | |
| 2414S | Mitutoyo 2414S Standard Dial Indicator .5" (.1") | 3 | |
| 2415S | Mitutoyo 2415S Standard Dial Indicator .5" (.1") | 1 | |
| 2506F | S/B 57-200 Douglas DC-9 Reference Standard 7075-T6 Aluminum. Figure 5, 6,7 | 1 | |
| 2510F | PUMP - VACUUM, PORTABLE, STANDARD DUTY | 1 | |
| 2545B-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY | 1 | |
| 2545B-02 | PUMP - VACUUM,PORTABLE,STANDARD DUTY | 1 | |
| 2545C-02 | PUMP - VACUUM, PORTABLE,STANDARD DUTY 220V, 50 HZ. (WELCH VACUUM TECHNOLOGY INC) | 4 | |
| 2546B-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY | 5 | |
| 2546C-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY | 2 | |
| 2546C-02 | PUMP - VACUUM, PORTABLE,STANDARD DUTY 220V, 50 HZ. (WELCH VACUUM TECHNOLOGY INC) | 5 | |
| 26-3-N | STANDARD TOOL | 1 | |
| 2607081-3 | HONEYWELL WHEEL - NEED A REFERENCE STANDARD NDT | 1 | |
| 262 | BOEING REFERENCE STANDARD 727 PT 6 53-10-27 | 2 | |
| 262A | BOEING REFERENCE STANDARD 727 PT 6 53-10-27 | 1 | |
| 263 | BOEING REFERENCE STANDARD 727 PT 6 53-10-27 PAGE 4 FIG 1. Includes Test Report and Certificate of Conformance. | 1 | |
| 2683201-1 | REFERENCE STANDARD AY | 2 | |
| 2683202-1 | REFERENCE STANDARD ASSEMBLY | 1 | |
| 2683301-1 | REFERENCE STANDARD AY | 4 | |
| 27-1-6033 | Fokker 50/60 calibration standard Part 6 53-40-05 pages 7&8 figure 4&5. Material 2024-T3 Aluminum. | 1 | |
| 27-95031-001 | Fairchild METRO 23, Model SA227-CC, METRO 23, Model SA227-DC,Reference standard for inspection of the MLG and NLG Yoke Assembly. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 272 | BOEING REFERENCE STANDARD 727, PT 6 55-10-27 FIG. 2 Includes Test Report and Certificate of Conformance. | 1 | |
| 27F-000-212-57-10-1204 | REFERENCE STANDARD FOR DYNAMIC INSPECTION | 1 | |
| 27F-2-212-57-10-1204 | REFERENCE STANDARD FOR DYNAMIC INSPECTION | 1 | |
| 28-0-4225 | STANDARD TOOLS SPRING BALANCE | 1 | |
| 28-0-6035 | Fokker Standard 70/100 PT6 53-10-14 PG 6 FG 5 | 1 | |
| 28-0-6036 | Fokker Standard 70/100 PT6 53-10-15 PG 12 FG 8 | 1 | |
| 28-04225 | STANDARD TOOLS SPRING BALANCE | 1 | |
| 2803S-10 | Mitutoyo 2803S-10 Standard Dial Indicator .025" (.01") | 1 | |
| 2804S-10 | Mitutoyo 2804S-10 High Resolution Standard Dial Indicator .05" (.01") | 1 | |
| 2805S-10 | Mitutoyo 2805S-10 High resolution Standard Dial Indicator .05" (.01") | 1 | |
| 285 | BOEING REFERENCE STANDARD 727 PART 6 57-10-27 FASTENER (BACB30NM7K23). Includes Test Report and Certificate of Conformance. | 1 | |
| 286 | BOEING REFERENCE STANDARD 727 PART 6 57-10-27 FASTENER (BACB30NM7K21). Includes Test Report and Certificate of Conformance. | 1 | |
| 29-90-114-10 | SCREWDRIVER / STANDARD PRACTICES | 3 | |
| 2902S | Mitutoyo 2902S Standard Reverse Reading Dial Indicator 10mm (1mm) | 1 | |
| 2922S | Mitutoyo 2922S Standard Dial Indicator .125" (.05") | 1 | |
| 2923S-10 | Mitutoyo 2923S-10 High Resolution Standard Dial Indicator .05" (.01") | 1 | |
| 2929S | Mitutoyo 2929S Standard One Revolution Dial Indicator 0.8mm | 1 | |
| 2929S-62 | Mitutoyo 2929S-62 Standard One Revolution Dial Indicator 0.8mm | 1 | |
| 296 | BOEING REFERENCE STANDARD 727 PT 6 53-30-27 Includes Test Report and Certificate of Conformance. | 1 | |
| 296050002-1 | SKYLOX STANDARD ORANGE | 5 | |
| 296050029-257 | SKYLOX STANDARD LAVENDER | 1 | |
| 296050029-2825 | SKYLOX STANDARD BLUE | 1 | |
| 296050029-802 | SKYLOX STANDARD GREEN | 1 | |
| 29A028 | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601. MATERIAL: 4340 STEEL. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance..... | 4 | |
| 29A029 | REFERENCE STANDARD - REFERENCE NDI | 5 | |
| 29A032 | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601, MATERIAL: 6AL-4V TITANIUM, 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. | 3 | |
| 29A047 | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601, Aluminum(7075-T7)(39.5% IACS) 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. | 5 | |
| 29A120 | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601, MAGNESIUM. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. | 2 | |
| 29A49 | AIRBUS REFERENCE STANDARD 3 EDM NOTCH STEEL | 1 | |
| 2KEX-120 | INTAKE/EXHAUST COVERS, Standard Design Strap Type (set of 4) | 1 | |
| 3-212-100-325-WP | UCAS STANDARD WIDE MODEL | 1 | |
| 30 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 30-300 | PlewsLubrimatic 30-300 Standard Duty Pistol Grease Gun | 1 | |
| 30-981-7132 | Sylvac 30-981-7132 Sylcom Software Standard Version Dongle | 1 | |
| 30-981-7232 | Sylvac 30-981-7232 Sylcom Advanced & Standard Bundle | 1 | |
| 3008-550 | TOOL - SCREW REMOVAL (ALSO CALLED A "LESTER" TOOL) (USE WITH STANDARD 1/4" HEXAGON SCREW DRIVER BITS) (MAGNAVON INDUSTRIES INC) | 3 | |
| 301 GUIDE | BOEING REFERENCE STANDARD GUIDE PLATE KC10 FUEL COMPENSATOR CUTOUT-INSPECTION | 1 | |
| 301SS | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 301 STAINLESS . SIZE: 1.5"W x 3.75"L x .25" | 1 | |
| 302 GUIDE | BOEING REFERENCE STANDARD GUIDE PLATE KC10 FUEL COMPENSATOR CUTOUT-INSPECTION | 1 | |
| 302.3 | OVEN STANDARD - 300°C | 1 | |
| 304-00005 | STANDARD GAUGE PSI | 5 | |
| 305 | BOEING REFERENCE STANDARD 737 PART 6 57-10-18 FIGURE 2 PAGE 6. Includes Test Report and Certificate of Conformance. | 1 | |
| 312 | BOEING REFERENCE STANDARD 737 PART 6 53-10-17 PAGE 6 FIGURE 2. 2024-T3 ALUMINUM Includes Test Report and Certificate of Conformance. | 7 | |
| 313A/313B | BOEING REFERENCE STANDARD 737 PART 6 53-10-17 PAGE 7 FIGURE 3. 2024-T3 ALUMINUM | 1 | |
| 315 | BOEING REFERENCE STANDARD 737 PART 4 55-30-01 FIGURE 1 PAGE 4. Includes Test Report and Certificate of Conformance. | 4 | |
| 316 | BOEING REFERENCE STANDARD 737 PART 4 55-30-01 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 31A008 | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601. MATERIAL: 4340 STEEL. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance... | 1 | |
| 320 | BOEING REFERENCE STANDARD 737 PART 6 55-10-19 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 320008B-SO | WHEEL DEFLATOR FOR STANDARD BORE SCHRADER WHEEL VALVE: | 3 | |
| 321 | BOEING REFERENCE STANDARD 737 PART 6 53-10-19 FIGURE 3 PAGE 6. Includes Test Report and Certificate of Conformance. | 7 | |
| 32244-TH | 1/2DR STANDARD SKT 12PT 1-3/8 | 1 | |
| 323A | BOEING REFERENCE STANDARD 737 PART 4 55-50-01 FIGURE 1 PAGE 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 323B | BOEING REFERENCE STANDARD 737 PART 4 53-10-38 FIGURE 2 PAGE 6. Includes Test Report and Certificate of Conformance. | 1 | |
| 3252LMT | STANDARD MAGNETIC NEEDLE | 1 | |
| 326 | BOEING REFERENCE STANDARD 737 PART 6 53-10-28 FIGURE 1 PAGE 4. Includes Test Report and Certificate of Conformance. | 1 | |
| 328A | Boeing Reference standard 737 pt 6 53-10-38 | 1 | |
| 328A/328B | BOEING REFERENCE STANDARD 737 PART 6 53-10-38 FIGURE 2 PAGE 7. | 1 | |
| 328AB | Boeing Reference Standard 737 PT6 53-10-38 | 1 | |
| 328C/328D | BOEING REFERENCE STANDARD 737 PART 6 53-10-38 FIGURE 3 PAGE 8. | 1 | |
| 33-725 | 25' POWERLOCK TAPE MEASURE WITH BOTH STANDARD AND METRIC MARKINGS. | 1 | |
| 33-B-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) | 1 | |
| 330-400 | BLADE COVERS, STANDARD TYPE (set of 3) | 1 | |
| 330A91-5805-03 | AIR INTAKE STANDARD SLING | 1 | |
| 332A91-5805-00 | AIR INTAKE STANDARD SLING | 1 | |
| 332A91‐5806‐01 | AIR INTAKE STANDARD SLING | 1 | |
| 335 | BOEING REFERENCE STANDARD 737 PT 6 53-10-31. Includes Test Report and Certificate of Conformance. | 10 | |
| 336A | BOEING REFERENCE STANDARD 737 PART 6 57-30-02 FIGURE 2 PAGE 5. | 1 | |
| 336B | BOEING REFERENCE STANDARD 737 PART 6 57-30-02 FIGURE 2 PAGE 5. | 1 | |
| 338A | BOEING REFERENCE STANDARD 737 PART 6 53-10-35 FIGURE 1 PAGE 6. MATERIAL: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 338B | BOEING REFERENCE STANDARD 737 PART 6 53-10-35 FIGURE 1 PAGE 6. MATERIAL: 301 1/2 HARD. Includes Test Report and Certificate of Conformance. | 1 | |
| 340-51-020-02 | NDT REFERENCE STANDARD SAAB - DANDT046 | 1 | |
| 341 | BOEING REFERENCE STANDARD 737 PART 4 53-10-40 FIGURE 1 PAGE 4. Includes Test Report and Certificate of Conformance. | 1 | |
| 345 | BOEING REFERENCE STANDARD 737 PART 6 57-40-01 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 348-3666 | KNIPEX VDO Standard tool set | 1 | |
| 349 | Reference Standard 349 | 1 | |
| 35-92106-0001 | STANDARD TOOLS KIT | 1 | |
| 35-92133-0001 | ENGINE AND STRUCTURE STANDARD TOOL KIT | 1 | |
| 350 | BOEING REFERENCE STANDARD 737 PT 4 32-20-01 FIG 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 351A | BOEING REFERENCE STANDARD 737 PT 6 53-10-01 | 2 | |
| 351B | BOEING REFERENCE STANDARD 737 PT 6 53-10-01 | 1 | |
| 353ABC | BOEING REFERENCE STANDARD 737 PT6 53-10-12 | 1 | |
| 353D | BOEING REFERENCE STANDARD 737 PT 6 53-10-12 | 2 | |
| 354A | BOEING REFERENCE STANDARD 737 PT 6 57-30-04 | 4 | |
| 354B | BOEING REFERENCE STANDARD 737 PT 6 57-30-04 | 1 | |
| 354C | BOEING REFERENCE STANDARD 737 PT 6 57-30-04 | 1 | |
| 355A | BOEING REFERENCE STANDARD 737 PT 6 57-30-04 | 1 | |
| 355B | BOEING REFERENCE STANDARD 737 PT 6 57-30-04 | 1 | |
| 355C | BOEING REFERENCE STANDARD 737 PT 6 57-30-04 | 1 | |
| 356 | BOEING REFERENCE STANDARD 737 53-30-04 PART 6 PAGE 4 FIGURE 1. Includes test report and Certificate of Conformance. | 9 | |
| 3600-25 | ULTRA LIGHT AIR HOSE ( INNER DIAMETER: 1/4" )( MAXIMUM WORKING PRESSURE: 300 PSI )( OUTER DIAMETER: .472" )( OVERALL LENGTH: 25' (7.6 M) )( TYPE: STANDARD HOSE ) | 1 | |
| 3600-50 | ULTRA LIGHT AIR HOSE ( INNER DIAMETER: 1/4" )( MAXIMUM WORKING PRESSURE: 300 PSI )( OUTER DIAMETER: .472" )( OVERALL LENGTH: 50' (15.2 M) )( TYPE: STANDARD HOSE ) | 1 | |
| 3616297-1 | BOEING REFERENCE STANDARD 737 PART 4 57-10-20 PAGE 7 FIGURE 2 . MATERIAL: 6AL-4V TITANIUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| 363 | BOEING REFERENCE STANDARD PART 6 53-30-03 FIGURE 1 PAGE 6. Includes Test Report and Certificate of Conformance. | 5 | |
| 365 | BOEING REFERENCE STANDARD 737 PART 4 71-20-01 PG.4 FIGURE 1 DETAIL I. Includes Test Report and Certificate of Conformance. | 6 | |
| 367 | BOEING REFERENCE STANDARD 737 PT 6 71-20-01 Figure 4, PG. 10-12 (Sheets 1-3) Includes Test Report and Certificate of Conformance. | 4 | |
| 3688-04 | HELICOIL STANDARD INSERT 3B GO-HI GAGE | 2 | |
| 3688-06 | HELICOIL STANDARD INSERT 3B THREAD GO-HI GAGE | 1 | |
| 3688-2 | HELICOIL STANDARD INSERT 3B THREAD GO-HI GAGE | 1 | |
| 369 | BOEING REFERENCE STANDARD 727 Part 6 53-30-27 & 737 Part 6 53-30-05. Includes Test Report and Certificate of Conformance. | 2 | |
| 3694-2 | HELICOIL STANDARD INSERT 3B THREAD GO-HI GAGE | 1 | |
| 3694-3 | HELICOIL STANDARD INSERT 3B TGREAD GO-HI GAGE | 1 | |
| 3694-4 | HELICOIL STANDARD INSERT 3B THREAD GO-HI GAGE | 1 | |
| 3694-5 | HELICOIL STANDARD THREAD GO-HI GAGE | 1 | |
| 3694-6 | HELICOIL STANDARD INSERT 3B THREAD GO-HI GAGE | 1 | |
| 369 | REFERENCE STANDARD | 2 | |
| 370 | BOEING REFERENCE STANDARD 737 PT 4 53-30-02 FIG 1. Includes Test Report and Certificate of Conformance. | 1 | |
| 375 | Alpha Aviation Model#375 Standard Aircraft Tail Post & Weight Assembly | 3 | |
| 378 | BOEING REFERENCE STANDARD 737 PT 6 53-10-44 PAGE 5 FIGURE 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 383 | BOEING REFERENCE STANDARD 737 PART 6 53-30-07 FIGURE 2 PAGE 7. Includes Test Report and Certificate of Conformance. | 2 | |
| 401 | BOEING REFERENCE STANDARD 747 PT 4 57-10-01 Page 4 Figure 1. Includes Test Report and Certificate of Conformance. | 2 | |
| 402 | BOEING REFERENCE STANDARD 747 PT 4 57-10-04 Page 5 Figure 1. Includes Test Report and Certificate of Conformance. | 3 | |
| 403 | BOEING REFERENCE STANDARD PT 4 57-10-04 FIG 2, PAGE 6. Includes Test Report and Certificate of Conformance. | 1 | |
| 404 | BOEING 747 REFERENCE STANDARD PART 6 57-10-08 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | 5 | |
| 405 | BOEING REFERENCE STANDARD 747 PT 4 57-10-02 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 406 | BOEING REFERENCE STANDARD 747 PT 6 57-10-09 Page 6 Figure 2. Includes Test Report and Certificate of Conformance. | 12 | |
| 408 | BOEING REFERENCE STANDARD PT 4 57-10-03 FIG 2, PAGE 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 410 | BOEING REFERENCE STANDARD 747 PT 4 57-10-05 Page 6 Figure 3. Includes Test Report and Certificate of Conformance. | 4 | |
| 411 | BOEING REFERENCE STANDARD PT 6 55-10-04 FIG 1, PAGE 4. Includes Test Report and Certificate of Conformance. | 1 | |
| 412 | BOEING REFERENCE STANDARD PT 6 55-10-01 FIG 1, PAGE 3. Includes Test Report and Certificate of Conformance. | 1 | |
| 423 | BOEING 747 REFERENCE STANDARD PART 6 57-10-17 FIGURE 2 PAGE 8. Includes Test Report and Certificate of Conformance. | 3 | |
| 424 | BOEING 747 REFERENCE STANDARD PART 6 57-10-17 FIGURE 3 PAGE 9. Includes Test Report and Certificate of Conformance. | 3 | |
| 426 | BOEING REFERENCE STANDARD PT 4 55-10-01 FIG 1, PAGE 4. Includes Test Report and Certificate of Conformance. | 1 | |
| 431 | BOEING REFERENCE STANDARD PT 6 53-10-19 FIG 1, PAGE 6. Includes Test Report and Certificate of Conformance. | 3 | |
| 432 | BOEING REFERENCE STANDARD 747 PT 6 57-30-02 Page 4 Figure 1. Includes Test Report and Certificate of Conformance. | 1 | |
| 435 | BOEING 747 REFERENCE STANDARD PART 6 57-10-20 FIGURE 3 PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| 436 | BOEING 747 REFERENCE STANDARD PART 6 57-10-20 FIGURE 4 PAGE 8. Includes Test Report and Certificate of Conformance. | 3 | |
| 437 | BOEING REFERENCE STANDARD 747 53-10-01 PART 4 PAGE 11 FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 438 | BOEING REFERENCE STANDARD 747 53-10-01 PART 4 PAGE 11 FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 439 | BOEING 747 REFERENCE STANDARD PART 6 57-10-22 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | 2 | |
| 440 | BOEING REFERENCE STANDARD 747 PT 4 57-10-11 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 441 | BOEING REFERENCE STANDARD 747 PT 4 57-10-10 Page 9 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 442 | BOEING REFERENCE STANDARD PT 4 53-10-02 FIG 2, PAGE 5. Includes Test Report and Certificate of Conformance. | 4 | |
| 443 | BOEING REFERENCE STANDARD PT 4 53-10-02 FIG 2, PAGE 5. Includes Test Report and Certificate of Conformance. | 2 | |
| 446 | BOEING REFERENCE STANDARD 747 PT 4 57-10-13 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 447 | BOEING REFERENCE STANDARD 747 PT 4 57-10-13 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 448 | BOEING REFERENCE STANDARD 747 PT 4 57-10-13 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | 3 | |
| 449 | BOEING REFERENCE STANDARD 747 PT 4 57-10-13 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 460 | BOEING REFERENCE STANDARD 747 PART 6 57-10-28, PAGE 3 FIGURE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| 471 | BOEING REFERENCE STANDARD 747 PT 4 57-30-02 Page 4 Figure 1. Includes Test Report and Certificate of Conformance. | 5 | |
| 474 | BOEING REFERENCE STANDARD PT 6 53-10-20 FIG 1, PAGE 5. Includes Test Report and Certificate of Conformance. | 2 | |
| 475 | BOEING 747 REFERENCE STANDARD PART 6 57-10-27 FIGURE 1 PAGE 4. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 6 | |
| 476 | BOEING REFERENCE STANDARD PT 6 53-10-18 FIG 3, PAGE 6. Includes Test Report and Certificate of Conformance. | 1 | |
| 477 | BOEING REFERENCE STANDARD PT 6 53-10-18 FIG 3, PAGE 6. Includes Test Report and Certificate of Conformance. | 1 | |
| 478 | BOEING REFERENCE STANDARD PT 6 5-10-18 FIG 3 PAGE 6. Includes Test Report and Certificate of Conformance. | 1 | |
| 482 | BOEING 747 REFERENCE STANDARD PART 6 55-10-08 FIGURE 3 PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| 483 | BOEING 747 REFERENCE STANDARD PART 6 55-10-08 FIGURE 3 PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| 484 | BOEING 747 REFERENCE STANDARD PART 6 55-10-25 FIGURE 1 PAGE 4. Includes Test Report and Certificate of Conformance. | 2 | |
| 490 | BOEING REFERENCE STANDARD 747 PT 4 57-30-06 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 497 | BOEING REFERENCE STANDARD 767 PT 6 53-00-05 FIG 1. Includes Test Report and Certificate of Conformance. | 2 | |
| 506 | BOEING REFERENCE STANDARD 757 PT 4 57-40-01 FIG 3 Includes Test Report and Certificate of Conformance. | 4 | |
| 1002 | BOEING REFERENCE STANDARD PT 6 51-00-00 Part 6 FIG 4. Includes Test Report and Certificate of Conformance. | 4 | |
| 1003 | Reference Standard 1003 | 6 | |
| 1004 | Reference Standard 1004 | 6 | |
| 1005 | Reference Standard Boeing | 6 | |
| 2000 | STANDARD LINEN | 5 | |
| 2006 | BOEING REFERENCE STANDARD 727 PART 6 57-10-27 FASTENER (BACB30NM7K19). Includes Test Report and Certificate of Conformance. | 1 | |
| 2387 | PISTON STANDARD STEEL | 1 | |
| 2388 | PISTON STANDARD STEEL, 2IN LO | 1 | |
| 2972 | Mitutoyo 2972 Standard One Revolution Dial Indicator 1mm | 1 | |
| 2976 | Mitutoyo 2976 Standard One Revolution Dial Indicator .02" | 1 | |
| 2978 | Mitutoyo 2978 Standard One Revolution Dial Indicator .06" | 1 | |
| 3171 | Reference Standard NDT3171 | 1 | |
| 3230 | REFERENCE BLOCK (BOEING BONDED STANDARD 737) | 1 | |
| 3233 | REFERENCE BLOCK (BOEING BONDED STANDARD 737) | 4 | |
| 4004 | BOEING REFERENCE STANDARD 747 PART 4 53-40-01 PAGE 10 FIGURE 6. Includes Test Report and Certificate of Confromance. | 4 | |
| 4028 | BOEING REFERENCE STANDARD 747 PART 4 57-40-03 FIGURE 3 PAGE 6.MATERIAL: 4340 STEEL. Includes Test Report and Certificate of Conformance. | 4 | |
| 4029 | BOEING REFERENCE STANDARD 747 PART 4 55-50-01 FIGURE 1 PAGE 4.MATERIAL: 2024-T3 or 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 4036 | BOEING REFERENCE STANDARD 747 PART 4 57-40-05 FIGURE 3 PAGE 6.MATERIAL: 4340 STEEL. Includes Test Report and Certificate of Conformance. | 7 | |
| 4057 | BOEING REFERENCE STANDARD 747 PT 6 53-30-03 | 2 | |
| 4059 | BOEING 747 REFERENCE STANDARD PART 4 57-10-12 FIGURE 1 PAGE 5. Includes Test Report and Certificate of Conformance. | 2 | |
| 4065 | Boeing Standard 747 53-30-08 PT 6 PG 7 | 1 | |
| 4068 | Boeing Standard 747 53-30-09 PT6 PG3 | 1 | |
| 4070 | BOEING REFERENCE STANDARD 747, PT 6 53-30-07. Includes Test Report and Certificate of Conformance. | 1 | |
| 4072 | BOEING REFERENCE STANDARD 747 PT 6 53-30-05. Material 2024-T3 Aluminum. Fasteners BACR15CE5D5, BACR15CE6D5. Includes Test Report and Certificate of Conformance. | 1 | |
| 5135 | STANDARD OILERS 500ML (FOR LUB) | 1 | |
| 5209 | STANDARD BORE VALVE TOOL | 1 | |
| 5371.2 | STANDARD SOCKET ( 6PT) 1/2 | 1 | |
| 5373.8 | STANDARD SOCKET ( 6PT) 3/8 | 1 | |
| 5375.16 | STANDARD SOCKET ( 6PT) 5/16 | 1 | |
| 5377.16 | STANDARD SOCKET ( 6PT) 7/16 | 1 | |
| 5377.8 | STANDARD SOCKET ( 6PT) 7/8 | 1 | |
| 5451.6 | HALF DRIVE STANDARD 1’’ | 1 | |
| 10122 | STANDARD SCREW EXTRACTOR/SCREW KNOCKER/OLD MAN 8 | 1 | |
| 10156 | STANDARD RIVET SET KIT WITH 3X RIVET GUN | 1 | |
| 10213 | WILLIAMS 13 piece Standard Hex Key Set | 2 | |
| 10301 | STANDARD FLUSH | 3 | |
| 10302 | STANDARD FLUSH SET 1 INCH DIA | 3 | |
| 11075 | Standard ROTACUT Hole Cutting Kit - The Original! Includes 7 Cutters - MADE IN USA! | 3 | |
| 11638 | REFERENCE STANDARD SB190-57-0031/02 | 1 | |
| 13060 | 6” STANDARD HOLE FINDER* | 1 | |
| 13230 | 13” STANDARD HOLE FINDER* | 1 | |
| 16004 | 0.0157 HIGH SPEED STEEL DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 16023 | 0.0905 HIGH SPEED STEEL DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 16024 | 0.0945 HIGH SPEED STEEL DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 16026 | 0.1024 HIGH SPEED STEEL DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 16029 | 0.1142 HIGH SPEED STEEL DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 16032 | 0.126 HIGH SPEED STEEL DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 16051 | 0.2008 HIGH SPEED STEEL DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 16075 | 0.2953 HIGH SPEED STEEL DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 16087 | 0.3425 HIGH SPEED STEEL DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 16163 | LOCKING PLIER (VICE GRIP STYLE) 7" STANDARD JAW | 1 | |
| 16439 | 0.1535 COBALT DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 16440 | 0.1575 COBALT DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 16441 | 0.1614 COBALT DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 16449 | 0.1929 COBALT DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 16474 | 0.2913 COBALT DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 16488 | 0.3465 HIGH SPEED STEEL DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 16491 | 0.3583 COBALT DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 22642 | SEMCO® 226242 NO.2 DOUBLE HEAD STANDARD SEALANT REMOVAL SPATULA, PLASTIC, ORANGE, 7-1/4 IN L | 2 | |
| 40120 | STANDARD SOCKET 5/8" | 1 | |
| 40122 | STANDARD SOCKET 11/16" | 1 | |
| 40132 | STANDARD SOCKET 25MM | 1 | |
| 40216 | STANDARD SOCKET 1/2" | 1 | |
| 40317 | STANDARD SOCKET 17MM | 1 | |
| 40318 | STANDARD SOCKET 18MM | 1 | |
| 40319 | STANDARD SOCKET 19MM | 1 | |
| 41318 | 0.7087 COBALT DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 50000 | ACF-50 HANDHELD SPRAY SYSTEM OR ACF-50 STANDARD PUMP SPRAY SYSTEM-50000 OR 50003 | 1 | |
| 50003 | ACF-50 HANDHELD SPRAY SYSTEM OR ACF-50 STANDARD PU | 3 | |
| 54515.16 | HALF DRIVE STANDARD 15/16’’ | 1 | |
| 220538 | PPG Semco 220538 Model 252 Polyethylene 116 Orifice x 2.5 Long x 14 NPT Male Thread Standard Sealant Nozzle | 4 | |
| 220540 | PPG Semco 220540 Model 254 Polyethylene 18 Orifice x 2.5 Long x 14 NPT Male Thread Standard Sealant Nozzle | 2 | |
| 220542 | PPG Semco 220542 Model 410 Polyethylene 132 Orifice x 4 Long x 14 NPT Male Thread Standard Sealant Nozzle | 4 | |
| 220544 | PPG Semco 220544 Model 420 Polyethylene 116 Orifice x 4 Long x 14 NPT Male Thread Standard Sealant Nozzle | 8 | |
| 220548 | PPG Semco 220548 Model 430 Polyethylene 332 Orifice x 4 Long x 14 NPT Male Thread Standard Sealant Nozzle | 4 | |
| 220550 | PPG Semco 220550 Model 440 Polyethylene 18 Orifice x 4 Long x 14 NPT Male Thread Standard Sealant Nozzle | 4 | |
| 220553 | PPG Semco 220553 Model 620 Polyethylene 116 Orifice x 6 Long x 14 NPT Male Thread Standard Sealant Nozzle | 1 | |
| 220555 | PPG Semco 220555 Model 640 Polyethylene 18 Orifice x 6 Long x 14 NPT Male Thread Standard Sealant Nozzle | 1 | |
| 220557 | PPG Semco 220557 Model 820 Polyethylene 116 Orifice x 8 x 14 NPT Male Thread Standard Sealant Gun Nozzle | 2 | |
| 220559 | PPG Semco 220559 Model 840 Polyethylene 18 Orifice x 8 x 14 NPT Male Thread Standard Sealant Gun Nozzle | 1 | |
| 220561 | PPG Semco 220561 Model 1002 Polyethylene 116 Orifice x 10 x 14 NPT Male Thread Standard Sealant Gun Nozzle | 2 | |
| 220563 | PPG Semco 220563 Model 1004 Polyethylene 18 Orifice x 10 x 14 NPT Male Thread Standard Sealant Gun Nozzle | 1 | |
| 220565 | PPG Semco 220565 Model 1010 Polyethylene 516 Orifice x 10 x 14 NPT Male Thread Standard Sealant Gun Nozzle | 2 | |
| 224494 | PPG Semco 224494 Model 650 Polyethylene 38 Orifice x 6 Long x 14 NPT Male Thread Standard Sealant Nozzle | 1 | |
| 228623 | PPG Semco 228623 Model 420 Polyethylene 116 Orifice x 4 Long x 14 NPT Male Thread Standard Sealant Nozzle | 1 | |
| 229394 | STANDARD SEALANT SPREADER | 4 | |
| 235302 | STANDARD TEST SET | 1 | |
| 235502 | CASA CN-235 EDDY CURRENT REFERENCE STANDARD PART 5 57-10-05 PAGE 510 FIGURE 504b. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 235509 | STANDARD - CN235 | 1 | |
| 249003 | CALIBRTN, STANDARD 0.01 OHMS | 3 | |
| 416161 | SAFT STANDARD BATTERY MAINTENANCE TOOL KIT | 9 | |
| 419115 | Henkel 985088 LOCTITE Hot Melt Applicators 98030, 98035, 98036, 98040, 916268 Standard AdapterCheck Valve | 1 | |
| 478554 | Henkel 984261 LOCTITE Standard Cartridge to Nozzle Adapter for 300 mL Cartridges | 1 | |
| 535303 | STANDARD TEST SET | 1 | |
| 1001790 | MECHANIC STANDARD TOOLBOX RED | 1 | |
| 1006663 | RS232 STANDARD CABLE (1:1), 9-POLE, SOCKET/PIN | 1 | |
| 1006664 | RS232 STANDARD CABLE (1:1), 9-POLE, SOCKET/SOCKET | 1 | |
| 1017294 | CABIN STANDARD TOOLBOX | 1 | |
| 1902510 | EDDY CURRENT CALIBRATION STANDARD ALUMINUM | 1 | |
| 1920166 | OLYMPUS REFERENCE STANDARD ALUMINUM 7075-T651 / 7075-T73 | 1 | |
| 1920167 | REFERENCE STANDARD TITANIUM | 1 | |
| 2000194 | G200S "Short" towbar head for Gulfstream G150/G200/G250/G280/Galaxy/Dornier 328/Envoy 3. Nose gear attachment is mounted to a standard -2R shank with radial/linear shear protection incorporated. Compatible towbar(s): TB1, TB2.5, TB3 (w/Reducer), TB125 (w | 1 | |
| 2000468 | G200 towbar head for Gulfstream G150/G200/G250/G280/Galaxy/Dornier 328/Envoy 3. 60" aluminum extension tube with head attachment. Extension allows sufficient clearance under nose of aircraft to use with standard length towbar, eliminating the need for a | 1 | |
| 2001887 | Econo crate (open sided crate) for products fitting on standard pallet. Meets ISPM 15 fumigated wood shipping requirements. | 1 | |
| 2002443 | LC100G Galvanized Low Profile Lav Cart. Includes all hoses & couplers required to service aircraft. 68-gallon waste, 36-gallon fill. Honda gas pump system (max 72gpm/54psi), backup hand pump, flow meter included as standard equipment. (prev P/N 001646G) | 1 | |
| 2004049 | 2890 Double LD2/LD3 Dolly. 7000 lb. capacity, handles (2) ea LD2/LD3 or (1) LD8/LD11 container, unit comes standard with 2 WHEEL Ackerman steering. | 1 | |
| 2004853 | Iron Tire Aircraft Flat Tire Dolly. The Iron Tire is a robust aircraft wheel dolly, designed for use on aircraft with a flat tire. The unit allows for easy one-person recovery of a disabled aircraft. Standard features and include: 18,000 lbs (8164kg) tow | 1 | |
| 06010065 | STANDARD SOCKET 1" | 1 | |
| 10252720 | 0.311 HSS DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030110 | 0.0394 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030111 | 0.0433 CARBIDE DRILL BIT-1, ( NON-STANDARD ) | 1 | |
| 11030112 | 0.0492 CARBIDE DRILL BIT-1, ( NON-STANDARD ) | 1 | |
| 11030115 | 0.0591 CARBIDE DRILL BIT-1, ( NON-STANDARD ) | 1 | |
| 11030118 | 0.0709 CARBIDE DRILL BIT-1, ( NON-STANDARD ) | 1 | |
| 11030120 | 0.0807 CARBIDE DRILL BIT-1, ( NON-STANDARD ) | 1 | |
| 11030121 | 0.0827 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030122 | 0.0886 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030124 | 0.0945 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030126 | 0.1024 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030128 | 0.1102 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030129 | 0.1142 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030131 | 0.122 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030132 | 0.126 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030133 | 0.1299 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030134 | 0.1339 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030136 | 0.1417 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030137 | 0.1457 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030138 | 0.1496 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030139 | 0.1535 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030140 | 0.1575 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030142 | 0.1654 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030143 | 0.1693 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030146 | 0.1811 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030149 | 0.1929 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030151 | 0.2008 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030153 | 0.2087 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030157 | 0.2244 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030158 | 0.2283 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030159 | 0.2323 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030162 | 0.2441 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030163 | 0.248 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030164 | 0.252 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030166 | 0.2598 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030168 | 0.2677 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030172 | 0.2835 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030173 | 0.2874 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030174 | 0.2913 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030175 | 0.2953 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 11030176 | 0.2992 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030178 | 0.3071 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030179 | 0.311 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030180 | 0.315 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030181 | 0.3189 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030182 | 0.3228 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030183 | 0.3268 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030184 | 0.3307 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030185 | 0.3346 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030187 | 0.3425 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030188 | 0.3465 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030189 | 0.3504 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030190 | 0.3543 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030191 | 0.3583 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030194 | 0.3701 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030195 | 0.374 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030196 | 0.378 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030197 | 0.3819 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030199 | 0.3898 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 11030210 | 0.433 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 14100082 | STANDARD JAW PINCERS | 2 | |
| 110301100 | 0.3937 CARBIDE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 296050003 | SKYLOX STANDARD YELLOW | 1 | |
| 2050503383 | HEAD-STANDARD 90°, 1/16-1/4 COLLET | 3 | |
| 2050503403 | DESOUTTER AH-90-STD-S8 QUICK RELEASE STANDARD HEAD 90DG 5/16-28 UNF | 1 | |
| 2050503433 | DESOUTTER AH-360-STD-S8 QUICK RELEASE STANDARD HEAD 360DG 5/16-28 UNF | 1 | |
| 2509100213 | STANDARD TOOLS FEELER GAGE | 1 | |
| 18903500000 | PRIME STANDARD LIGHTING REFERENCE | 1 | |
| 39DLP | "DIGITAL ULTRASONIC THICKNESS GAGE WITH WAVEFORM VERIFICATION AND INTERNAL DATALOGGER. STANDARD KIT INCLUDES: CARRYING CASE, USB MANUAL, GAGEVIEW INTERFACE PROGRAM, USB CABLE, LITHIUMION RECHARGEABLE BATTERY " | 1 | |
| 4-1-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 1 | |
| 4-2-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 1 | |
| 4-3-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 2 | |
| 4-4-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 2 | |
| 4-90STD | GROUND POWER UNIT - STANDARD - ELECTRICAL - 90 KVA, 400 HZ - DIESEL POWERED - NBPT MODULE AVAILABLE | 1 | |
| 4.1MM | 0.1614 CARBIDE COMPOSITE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 4.2MM | 0.1654 CARBIDE COMPOSITE DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 4.8MM | 0.1896 CARBIDE COMPOSITE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 40-42A30 | Bowers 40-42A30 Ball Anvil Standard Steel M2.5mm Thread | 1 | |
| 40-42A31 | Bowers 40-42A31 Ball Anvil Standard Carbide M2.5mm Thread | 1 | |
| 4000KIT | STANDARD DG KIT | 6 | |
| 402-190.73 | 402-190.73;4x50GE - 802.3cd - PAM4 - QSFP56 - Standard License | 1 | |
| 402-620.73 | 402-620.73;FlexE 4x100GBASE-R PHY with client size up to 100G - Standard License | 1 | |
| 402-810.72 | 402-810.72;Advanced Error Analysis - Module Standard License | 1 | |
| 402-820.72 | 402-820.72;100G Ethernet FEC Validation - Module Standard License | 1 | |
| 402-822.72 | 402-822.72;50GE Ethernet FEC Validation - Module Standard License | 1 | |
| 402-864.72 | 402-864.72;FlexE 100G Ethernet FEC Validation - Module Standard License | 1 | |
| 402-868.72 | 402-868.72;FlexE Management Channel Test - Module Standard License | 1 | |
| 4032-1 | STANDARD SOCKET 21MM | 4 | |
| 4032-2 | STANDARD SOCKET 22MM | 1 | |
| 4032-3 | STANDARD SOCKET 23MM | 1 | |
| 403A/403B | BOEING REFERENCE STANDARD 747 PT 4 57-10-04 Page 6 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 40482020 | COMBINATION WRENCH,STANDARD LENGTH, 5/16, 12PT | 4 | |
| 41034G02 | DAVID CLARK (DC) CLAA99- 14CRG 4-BAY BATTERY CHARGER FOR 9900/9100 SYSTEM BATTERIES. THE 4- BAY BATTERY CHARGER (CLAA99- 14CRG) REQUIRES A STANDARD 110V CORD WITH A THREE-PRONG PLUG FOR CHARGING | 3 | |
| 412B5MHZ35R80FE | CUSTOM 5MHz 35° TRANSVERSE WAVE TRANSDUCER WITH END MOUNT MICRODOT CONNECTOR WIT A 80mm RADIUS. USED WITH AIRBUS REFERENCE STANDARD PART NUMBER 98A54003096 Includes Test Report and Certificate of Conformance. REFERENCE: AIRBUS A300-600 PART 4 54-50-20 | 1 | |
| 412B5MHZ40R75FE | CUSTOM 5MHz 40° TRANSVERSE WAVE TRANSDUCER WITH END MOUNT MICRODOT CONNECTOR WIT A 75mm RADIUS. USED WITH AIRBUS REFERENCE STANDARD PART NUMBER 98A54003069 Includes Test Report and Certificate of Conformance. REFERENCE: AIRBUS A300-600 PART 4 54-50-20 | 1 | |
| 41318 0.7087 | 41318 0.7087 COBALT DRILL BIT-3, ( NON-STANDARD ) | 1 | |
| 418W1017-20 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 9 | |
| 4340-3-0050 | DC9 REFERENCE STANDARD S/B 57-118 SERVICE SKETCH 2671 SHEET 4 OF 7. MATERIAL: 4340 STEEL. | 1 | |
| 4340-5-0050 | STANDARD REFERENCE BLOCKS FOR ULTRASONICS – DISTANCE AMPLITUDE, 5/64" FLAT-BOTTOM HOLES, 4340 STEEL, IN ACCORDANCE WITH ASTM E127 | 1 | |
| 4340-5-0100 | STANDARD REFERENCE BLOCKS FOR ULTRASONICS – DISTANCE AMPLITUDE, 5/64" FLAT-BOTTOM HOLES, 4340 STEEL, IN ACCORDANCE WITH ASTM E127 | 1 | |
| 4340-5-0175 | STANDARD REFERENCE BLOCKS FOR ULTRASONICS – DISTANCE AMPLITUDE, 5/64" FLAT-BOTTOM HOLES, 4340 STEEL, IN ACCORDANCE WITH ASTM E127 | 1 | |
| 45-128 | Custom 8 Hole Calibration Standard Test Coupon Assembly Figure 5 Page 10 to include the following Pieces. Figure 2 Page 7. Material .071" 2024-T3 Clad Aluminum, 7 EDM Flaws total. Figure 3 Page 8 .250" 4130or4340 Steel 0 EDM Flaws total and Figure 4... | 2 | |
| 45-128-1 | Custom 8 Hole Calibration Standard Test Coupon. Figure 1 Page 7. Material .071" 2024-T3 Clad Aluminum. 7 EDM Flaws total. | 1 | |
| 45-128-2 | Custom 8 Hole Calibration Standard Test Coupon. Figure 3 Page 8. Material .250" 4130/4340 Steel. 0 EDM Flaws total. | 1 | |
| 45-128-3 | Custom 8 Hole Calibration Standard Test Coupon. Figure 4 Page 9. Material .125" 2024-T3 Clad Aluminum. 0 EDM Flaws total. | 1 | |
| 45-403 | Ringer Cable Stripper Standard No Blade | 5 | |
| 46-081 | RIVET FAN SPACING TOOLS TYPE: STANDARD NUMBER | 5 | |
| 4708T | PROTO 1/4'' 12-POINT SAE STANDARD SOCKET | 1 | |
| 485A | Boeing Standard 747 PT6 53-10-23 FG 3 PG 8 | 1 | |
| 485B | Boeing Standard 747 PT6 53-10-23 FG 3 PG 8 | 1 | |
| 49-TD1 | DIAMOND PLATED TWIST DRILLS 1/8 DIA. STANDARD GRIT | 1 | |
| 49-TD2 | DIAMOND PLATED TWIST DRILLS 1/4 DIA. STANDARD GRIT | 1 | |
| 49-TD3 | DIAMOND PLATED TWIST DRILLS 3/8 DIA. STANDARD GRIT | 1 | |
| 49-TD4 | DIAMOND PLATED TWIST DRILLS 7/16 DIA. STANDARD GRI | 1 | |
| 49-TD5 | DIAMOND PLATED TWIST DRILLS 1/2 DIA. STANDARD GRIT | 1 | |
| 49-TD6 | DIAMOND PLATED TWIST DRILLS 5/8 DIA. STANDARD GRIT | 1 | |
| 49-TD7 | DIAMOND PLATED TWIST DRILLS 3/4 DIA. STANDARD GRIT | 1 | |
| 49-TD8 | DIAMOND PLATED TWIST DRILLS 7/8 DIA. STANDARD GRIT | 1 | |
| 49-TD9 | DIAMOND PLATED TWIST DRILLS 1 DIA. STANDARD GRIT 4 | 1 | |
| 50 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 513-404E | MITUTOYO DIAL TEST INDICATOR STANDARD 0.8 MM | 1 | |
| 515-721 | Mitutoyo 515-721 - Standard Accuracy Check Master 0-450mm | 1 | |
| 515-722 | Mitutoyo 515-722 - Standard Accuracy Check Master 0-600mm | 1 | |
| 515-723 | Mitutoyo 515-723 - Standard Accuracy Check Master 0-1000mm | 1 | |
| 5163A42 | WRENCH:COMBINATION STANDARD SET IN METRIC TOOLS - HAND / POWER :10 PIECE INCH WRENCH SET 1/4" - 3/4" ORDER PN 5163A43 FROM MCMASTER- CARR MANUFACTURER PART NUMBER (M) - 5163A42; MANUFACTURER (MA) - ARMSTRONG; VENDOR/SUPPLIER PART NUMBER (VN) - 5163A42 | 1 | |
| 5163A43 | WRENCH SET:COMBINATION TYPE:RATCHETING BOX SIZE:3/8 INCH - 3/4 INCH OPEN SIZE:3/8INCH - 3/4INCH STYLE:12- POINT MATL:CHROME PLATED NUMBER OF PIECES:10 PIECES CONT:PLASTIC WRENCH:COMBINATION STANDARD SET IN INCHES TOOLS - HAND / POWER :STANDARD SET IN INCH | 1 | |
| 5290020-4 | Cessna Model 401/402 Calibration Standard Figure 4 part 2 & 3 Inspection. Plate A - 7075-T6 Aluminum and Plate B - 2024-T3 Aluminum. | 1 | |
| 53-10-126/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-0126/1 PT 6 FIGURE 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-10-130/158/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-01 PT 6 FIGURES 5&6 PAGES 10&11. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-10-137 | BAE 146-RJ SERIES REFERENCE STANDARD SET OF 8 UNITS, 53-10-12 PT 6 FIGURE 7 PAGES 907-910. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-10-153/155/175/193/194/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-08 PT 6 FIGURES 5&6 PAGES 9&10. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-10-153/155/175/194/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-06 PT 6 FIGURES 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-10-192/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-25 PT 6 FIGURES 6&7 PAGES 10&11. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-104/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-00-86 PT 6 FIGURES 7&8 PAGES 14&15. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-140A/1 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 53-20-26 PG 10 FIG 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-140A/2 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 53-20-26 PG 10 FIG 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-145/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-20-03 PT 6 FIGURE 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-148/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-20-01 PT 6 FIGURES 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-149/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-20-65 PT 6 FIGURE 11&12 PAGES 16&17. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-155/1/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-36 PT 6 FIGURES 7&8 PAGES 13&14. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-155/1/2 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-36 PT 6 FIGURES 9&10 PAGES 15&16. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-155/1/3 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-36 PT 6 FIGURES 11&12 PAGES 17&18. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-155/1/4 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-36 PT 6 FIGURES 13&14 PAGES 19&20. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-157/2 | BAE 146-RJ SERIES REFERENCE STANDARD 53-20-84 PT 6 FIGURE 8 PAGE 12. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-165/2 | RADIUSED ULTRASONIC PROBE SHOE USED WITH K5K AND REFERENCE STANDARD 53-20-165/1 (BAe 146 Series) | 1 | |
| 53-20-167/1 | BAE REFERENCE STANDARD 146-RJ 53-238 53-20-21 PT 4 FIGURE 4 PAGE 519. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-169/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-20-21 PT 4 FIGURE 3 PAGES 505. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-169/2 | BAE 146-RJ SERIES REFERENCE STANDARD 53-20-21 PT 4 FIGURE 3 PAGES 505. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-171/1 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 53-20-21 PG 512 FIG 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-171/2 | RADIUSED ULTRASONIC PROBE SHOE USED WITH K5K(AFC-525-7S) AND REFERENCE STANDARD 53-20-165/1 (BAe 146 Series). Includes Certificate of Conformance. | 1 | |
| 53-20-179/2 | BAE 146-RJ SERIES REFERENCE STANDARD 53-30-14 PT 6 FIGURE 5&6 PAGES 10&11. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-20-180/3 | BAE REFERENCE STANDARD 146-RJ 53-20-88 FIG 4&5, PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-205 | OFFSET RIVET GUN SET 5PC MIX UNIV. STANDARD 'L" 3-1/2" .401 | 2 | |
| 53-30-126/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-30-02 PT 6 FIGURE 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-30-131/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-30-01 PT 6 FIGURE 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-30-174/177/179/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-30-03 PT 6 FIGURE 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-30-174/177/179/2 | BAE 146-RJ SERIES REFERENCE STANDARD 53-30-04 PT 6 FIGURE 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-40-125/1 | BAE REFERENCE STANDARD 146-RJ 53-238 53-40-06 PT 6 FIGURE 5&6 PAGES 9&10. Includes Test Report and Certificate of Conformance. | 1 | |
| 53-41-04-991-002-A | Airbus Reference standard 53-41-04-991-002-A Sheet 01 part 6 page 11. Includes Test Report and Certificate of Conformance. | 1 | |
| 532002100 | STANDARD "CROW FOOT WRENCH FLARE NUT" TORQUE | 1 | |
| 5420M | STANDARD SOCKET 20MM | 1 | |
| 545-020 | STANDARD TIP | 1 | |
| 5451.1.16 | HALF DRIVE STANDARD 1-1/16’’ | 1 | |
| 5451.1.4 | HALF DRIVE STANDARD 1-1/4’’ | 1 | |
| 5451.1.8 | HALF DRIVE STANDARD 1-1/8’’ | 1 | |
| 5451.3.16 | HALF DRIVE STANDARD 1-3/16’ | 1 | |
| 546C-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY | 1 | |
| 55-1987 | 16-26 AWG Ergo-Elite Stripmaster® Standard Tool | 3 | |
| 55-31-105/1 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 55-31-42 PG 7 FIG 3. Includes Test Report and Certificate of Conformance. | 1 | |
| 55-31-109/2 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 55-31-43 PG 8 FIG 4. Includes Test Report and Certificate of Conformance. | 1 | |
| 55-31-NDT 1 | BAE REFERENCE STANDARD 146-RJ 53-238 55-20-11 PT 6 FIGURE 5 PAGE 9. Includes Test Report and Certificate of Conformance. | 1 | |
| 55-33-101/1 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 55-33-10 PG 7/8 FIG 3. Includes Test Report and Certificate of Conformance. | 1 | |
| 55-33-101/2 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 55-33-10 PG 7/8 FIG 3. Includes Test Report and Certificate of Conformance. | 1 | |
| 55-33-101/3 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 55-33-10 PG 7/8 FIG 3. Includes Test Report and Certificate of Conformance. | 1 | |
| 55-36-01 | UT CALIBRATION REFERENCE STANDARD , STEP WEDGE, 7000 SERIES ALUMINUM, GENERIC AS PER ATR 72 NTM 55-36-01 | 1 | |
| 551-341-10 | Mitutoyo 551-341-10 ABSOLUTE Digimatic Caliper 0-300mm / 0-12", Nib and Standard Jaws | 1 | |
| 5543A17 | CHROME-PLATED 12-POINT STANDARD SOCKET, 1/4" DRIVE, 5/32" SIZE | 1 | |
| 57-10-102/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-12 PT 4 FIGURE 6&7 PAGES 11&12. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-10-102/2 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-12 PT 4 FIGURE 6&7 PAGES 11&12. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-10-107/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-52 PT 6 FIGURE 5&6 PAGES 11&12. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-10-107/2 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-52 PT 6 FIGURE 6&7 PAGES 12&13. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-10-111/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-55 PT 6 FIGURE 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-10-111/2 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-55 PT 4 FIGURE 5&6 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-10-117/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-50 PT 6 FIGURE 4&5 PAGES 8&9. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-10-117/2 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-48 PT 6 FIGURE 3&4 PAGES 7&8. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-10-119/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-42 PT 6 FIGURES 4&5 PAGE 7&8. Material: 7075-T6 & 2014A-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-20-148A/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-20-24 PT 6 FIGURES 5&6 PAGE 9&10. Material: 2024-T3 & 2024-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-20-163/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-20-28 PT 6 FIGURES 4&5 PAGE 9&10. Material: 2024-T3 & 2024-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-20-179/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-20-10 PT 4 FIGURES 4 PAGE 8. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-54-103C | CUSTOM BOEING REFERENCE STANDARD 7075-T6 ALUMINUM | 1 | |
| 57309 | 57309;Cable; polarized BNC to standard BNC / 55-0605-16 | 1 | |
| 58886 | EU STANDARD CHARGER | 1 | |
| 59026 | STANDARD REACTION ARM FOR 58875 AND 58876 | 1 | |
| 59027 | STANDARD REACTION ARM FOR 58877 AND 58878 | 1 | |
| 59028 | STANDARD REACTION ARM FOR 58901 | 1 | |
| 59270 | K1-zert Reference Standard No.1 | 1 | |
| 59608 | BATTERY TORQUE WRENCH 3/4" 110 – 850 Nm (90 - 620 ft.lbs) WITH TORQUE MEASUREMENT (set with 2 batteries, charger and standard reaction arm) | 1 | |
| 59609 | BATTERY TORQUE WRENCH 3/4" 150 – 1400 Nm (110-1030 ft.lbs) WITH TORQUE MEASUREMENT(set with 2 batteries, charger and standard reaction arm) | 1 | |
| 59610 | BATTERY TORQUE WRENCH 1" 250 – 1800 Nm (190 -1330 ft.lbs) WITH TORQUE MEASUREMENT (set with 2 batteries, charger and standard reaction arm) | 1 | |
| 59611 | BATTERY TORQUE WRENCH 1" 350 – 2500 Nm (260-1840 ft.lbs) WITH TORQUE MEASUREMENT (set with 2 batteries, charger and standard reaction arm) | 1 | |
| 59612 | BATTERY TORQUE WRENCH 1" 480 – 3500 Nm (360-2580 ft.lbs) WITH TORQUE MEASUREMENT (set with 2 batteries, charger and standard reaction arm) | 1 | |
| 59613 | BATTERY TORQUE WRENCH 1" 560 – 4000 Nm (410-2950 ft.lbs) WITH TORQUE MEASUREMENT (set with 2 batteries, charger and standard reaction arm) | 1 | |
| 59614 | BATTERY TORQUE WRENCH 1.1/2" 650 – 4800 Nm (480-3540 ft.lbs) WITH TORQUE MEASUREMENT (set with 2 batteries, charger and standard reaction arm) | 1 | |
| 59615 | BATTERY TORQUE WRENCH 1.1/2" 800 – 6000 Nm (590-4420 ft.lbs) WITH TORQUE MEASUREMENT (set with 2 batteries, charger and standard reaction arm) | 1 | |
| 59620 | STANDARD REACTION ARM FOR 59608 AND 59609 | 1 | |
| 59621 | STANDARD REACTION ARM FOR 59610, 59611, 59612 AND 59613 | 1 | |
| 59622 | STANDARD REACTION ARM FOR 59614 | 1 | |
| 59623 | STANDARD REACTION ARM FOR 59615 | 1 | |
| 576714 | STANDARD STRAIGHT ACTION HAND CRIMP TOOL | 4 | |
| 580A | 1/2 RATCHET STANDARD HANDLE | 1 | |
| 590580 | MANDATORY MODULE STANDARD CHASSIS | 1 | |
| 59191030 | 7210/30-SPARE PARTS STANDARD MANOSKOP | 1 | |
| 5L16-A00 | STANDARD PHASED-ARRAY PROBE, 5 MHZ LINEAR ARRAY, 16 ELEMENTS, 0.012 IN. (0.31 MM) PITCH (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| 5L60-60X10-A14-P-2.5-OM | STANDARD PHASED ARRAY PROBE | 1 | |
| 5L64-64X7-NW1-P-5-OM | STANDARD PHASED ARRAY PROBE | 1 | |
| 6" X 18" ID 1" ANGLE | Standard Frame, Steel | 1 | |
| 6-0-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 5 | |
| 6-1-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 2 | |
| 6-2-N | COLD WORKING TOOL STANDARD | 3 | |
| 6-3-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 4 | |
| 600-058 | HAND BANDING TOOL - STANDARD CLAMPING BAND | 8 | |
| 6001-1 | Standard Bushing Style Hole Finder - Length: 8-1/2", Size: #40 | 1 | |
| 6001-1EL | Standard Bushing Style Hole Finder - Length: 13-1/2", Size: #40 | 2 | |
| 6001-2 | Standard Bushing Style Hole Finder - Length: 8-1/2", Size: #30 | 1 | |
| 6001-2EL | Standard Bushing Style Hole Finder - Length: 13-1/2", Size: #30 | 2 | |
| 6001-3 | Standard Bushing Style Hole Finder - Length: 8-1/2", Size: #21 | 3 | |
| 6001-3EL | Standard Bushing Style Hole Finder - Length: 13-1/2", Size: #21 | 1 | |
| 6001-5 | Standard Bushing Style Hole Finder - Length: 8-1/2", Size: #10 | 2 | |
| 6001-5EL | Standard Bushing Style Hole Finder - Length: 13-1/2", Size: #10 | 1 | |
| 6001-8 | Standard Bushing Style Hole Finder - Length: 8-1/2", Size: 1/4" | 1 | |
| 6001-8EL | Standard Bushing Style Hole Finder - Length: 13-1/2", Size: 1/4" | 1 | |
| 601-100 | ATS STANDARD BANDS | 2 | |
| 601R32-079K90 | CALIBRATION STANDARD KIT | 1 | |
| 602 | BOEING REFERENCE STANDARD 767 PT 4 32-10-01 FIG 2 Includes Test Report and Certificate of Conformance. | 1 | |
| 603 | BOEING REFERENCE STANDARD 767 PT 4 55-10-01 FIG 1. Includes Test Report and Certificate of Conformance. | 1 | |
| 604A | BOEING REFERENCE STANDARD 767 PT 6 53-60-01 FIG 1 | 1 | |
| 604B | BOEING REFERENCE STANDARD 767 PT 6 53-60-01 FIG 1 | 1 | |
| 605 | BOEING REFERENCE STANDARD 767 PT 6 22-10-01 FIG 2. Includes Test Report and Certificate of Conformance. | 4 | |
| 605-522 | CONDUCTIVITY STANDARD 43 IACS | 1 | |
| 605A | BOEING REFERENCE STANDARD 767 PT 6 22-10-01 | 1 | |
| 608 | BOEING REFERENCE STANDARD 767 PT 4 27-80-01 FIG 4 Includes Test Report and Certificate of Conformance. | 1 | |
| 610 | BOEING REFERENCE STANDARD 767 PT 4 32-20-01 FIG 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 615-3 | ARINC STANDARD DATA LOADER | 1 | |
| 62200-7400 | Tool Kit for Standard Manual Press FFC | 1 | |
| 62200-7800 | Standard Manual Press for FFC | 1 | |
| 62201-0904 | Insertion Module for Standard Shield Signal Header, 6-Row by 14-Wide, 28.00mm | 1 | |
| 62201-0905 | Insertion Module for Standard Shield Signal Header, 6-Row by 13-Wide, 26.00mm | 1 | |
| 62202-0208 | Insertion Module for Standard Shield Signal Header, 6-Row by 25-Wide, 50.00mm | 1 | |
| 62202-0209 | Insertion Module for Standard Shield Signal Header, 8-Row by 10-Wide, 20.00mm | 1 | |
| 62202-0210 | Insertion Module for Standard Shield Signal Header, 8-Row by 25-Wide, 50.00mm | 1 | |
| 810 | BUCKLE 1Ó STANDARD HANDLE | 1 | |
| 7300 | DINITROL ACS, STANDARD KIT | 1 | |
| 7374 | EDDY CURRENT BOLT HOLE STANDARD BLOCK (7075-T6 ALUMINUM) | 1 | |
| 9043 | Dill Air Controls 9043 Standard Bore High Pressure Strut Coupler - .375-24 Hose Connector - 3,000 PSIG | 3 | |
| 61008 | STANDARD BASIN WRENCH 32 MM | 1 | |
| 65514 | STANDARD SELF-LEVELING LASER LEVEL | 1 | |
| 66275 | HSS DRILL BIT 19 DIN 338 STANDARD WITH REDUCED SHANK | 1 | |
| 70385 | Cotton Fiber Mounted Point Test Kits (Description: 13 PC Mini Assortment) (Spindle: 1/8") (Add to cart: Add To Cart) (Description: 13 PC Standard Assortment) (Spindle: 1/4") (Add to cart: Add To Cart) | 3 | |
| 78755 | STANDARD STRAIGHT SUPPORT | 1 | |
| 90004 | 90004;Standard Accessories;7200 | 1 | |
| 90252 | Digital Aircraft Cable Tensiometers (Description: Standard Preset: 1/16", 3/32",) (Description continued: 1/8" & 5/32") (Range: 20 to 250 lbs) (Resolution: 0.5 lbs) (Add to cart: Contact us to order) | 1 | |
| 90253 | Digital Aircraft Cable Tensiometers (Description: Standard Preset: 1/16", 3/32",) (Description continued: 1/8" & 5/32") (Range: 20 to 250 lbs) (Resolution: 0.5 lbs) (Add to cart: Contact us to order) (Description: Standard Preset: 3/32", 1/8" &) (Descript | 1 | |
| 90254 | Digital Aircraft Cable Tensiometers (Description: Standard Preset: 1/16", 3/32",) (Description continued: 1/8" & 5/32") (Range: 20 to 250 lbs) (Resolution: 0.5 lbs) (Add to cart: Contact us to order) (Description: Standard Preset: 3/32", 1/8" &) (Descript | 1 | |
| 90255 | Digital Aircraft Cable Tensiometers (Description: Standard Preset: 1/16", 3/32",) (Description continued: 1/8" & 5/32") (Range: 20 to 250 lbs) (Resolution: 0.5 lbs) (Add to cart: Contact us to order) (Description: Standard Preset: 3/32", 1/8" &) (Descript | 1 | |
| 94126 | Cordless Electric Scissor Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Standard Blade Assembly) (Add to cart: Contact us to order) | 1 | |
| 94128 | Cordless Electric Scissor Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Standard Blade Assembly) (Add to cart: Contact us to order) (Description: Blade Assembly with Shoe) (Add to cart: Contact us to order) | 1 | |
| 631590 | MAGNETIC FLUX INDICATORS: STANDARD QQI MODEL CX-230 | 2 | |
| 6380002-1 | CALIBRATION STANDARD KIT | 1 | |
| 63819-1300 | Hand Crimp Tool for Standard 1.57mm Pin and Socket Crimp Terminals, 18-24 AWG | 9 | |
| 63819-6800 | Hand Crimp Tool for Industry standard 1.78mm Terminals | 1 | |
| 63819-6900 | Hand Crimp Tool for Industry standard 1.78mm Tab Terminals, 24-26 AWG Wire | 1 | |
| 6383103 | REFERENCE STANDARD KIT | 1 | |
| 640-025-007 | GEIT ROTARY TAPERED STANDARD BLOCK KIT ALUMINUM | 1 | |
| 64000-0041 | Manual Standard Press for SC Power Connector | 1 | |
| 64003-7300 | Right Hand Crimp Tool for Female Non-Insulated Standard Quick Disconnects, 12-16 AWG Wire | 1 | |
| 6412-249 | STANDARD 335 | 1 | |
| 6583103-1 | Cessna Model 500 Calibration Standard 53-30-03-0 Rev. 14 Figure 4 Sheet 1 Inspection. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 6914V-SD | STANDARD SCRADER VALVE TOOL, TO REMOVE CORE OF PRESSURE TEST VALVE. | 1 | |
| 69360-11 | STANDARD MAG KIT | 1 | |
| 6983101-5 | CESSNA REFERENCE STANDARD PAINT THICKNESS MESURAMENT | 1 | |
| 6B34 | STANDARD COMPASS FOR COMPASS SWING | 1 | |
| 7-696 | 1’’ DRIVE STANDARD IMPACT SOCKET 6-POINT 3’’ | 1 | |
| 703A91022301 | STANDARD HOISTING RING | 1 | |
| 703A95-0030-10 | ELECTRICIAN'S STANDARD CASE | 1 | |
| 71130013 | 11050N-3-STANDARD TWO ARM PULLER | 1 | |
| 71130015 | 11050N-5-STANDARD TWO ARM PULLER | 1 | |
| 71190011 | 11055N-1-STANDARD PULLERS TWO-ARMED W | 1 | |
| 71190012 | 11055N-2-STANDARD PULLERS TWO-ARMED W | 1 | |
| 71190013 | 11055N-3-STANDARD PULLERS TWO-ARMED W | 1 | |
| 714AAFLZ | OUTSIDE MICROMETERS / STARRETT ELECTRONIC DIGITAL INTERCHANGEABLE ANVIL (WITH OUTPUT) WITH STANDARD INCH GRADUATIONS ON SHELL AND THIMBLE STARRETT CATALOG NO 714AAFLZ APPROX INCH.0-4_. 0-101 MM EDP NO. 64427 | 1 | |
| 71658-10-42 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-10-42 (5/8" X 4.1") | 1 | |
| 71658-10-46 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-10-46 (5/8" X 4.4") | 1 | |
| 71658-14-45 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-14-45 (7/8" X 4.8") | 1 | |
| 71658-14-50 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-14-50 (7/8" X 5.1") | 1 | |
| 71658-16-55 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-16-55 (1.0" X 6.0") | 1 | |
| 71658-18-53/2&3 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 CARBON STEEL, 54-10-11 PAGE 651 FIG.603 SHEET 39 | 1 | |
| 71658-18-59 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-8-59 (1 1/8" X 6.25") | 1 | |
| 71658-18-64 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-18-64 (1 1/8" X 6.5") | 1 | |
| 71658-20-68 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-20-68 (1 1/4" X 7.0") | 1 | |
| 71658-7-35/1&4 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 CARBON STEEL, 54-10-11 PAGE 651 FIG.603 SHEET 39 | 1 | |
| 717RS1 | 717-200 REFERENCE STANDARD ISOLATOR LUG. FIG. 1.1 SHEET 1, PAGE 1. MATERIAL: 4340 NORMALIZED STEEL PER MIL-S-5000. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS10-C | 717-200 REFERENCE STANDARD FOR THE LOWER CENTER WING SKIN PANELS AT STRINGER 16 &18. PAGES 1-11. MATERIAL: 2024-T3, 7075-T6 &7075-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS4 | 717-200 REFERENCE STANDARD FIGURE 1.17 SHEETS (1-4 ), PAGES 1-4. MATERIAL: 2024-T3 and 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS9 | BOEING 717-200 REFERENCE STANDARD FIGURE 1.24. MATERIAL: 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| 727085 | STANDARD ABRASIVES | 1 | |
| 727086 | STANDARD ABRASIVES | 2 | |
| 73A26-01 | STANDARD TARGET (ELDEC CRANE) | 1 | |
| 750071403 | STANDARD "O" RING | 1 | |
| 7552-3 | TOOLS FOR INSTALLATION OF STANDARD HELI-COIL® INSERTS AND INNER TWINSERT® COILS IN THE PISTON HOUSING | 5 | |
| 7552-4 | TOOL FOR INSTALLATION OF STANDARD HELI COIL INSERT IN THE PISTION HOUSING | 10 | |
| 7637987-19 | CUSTOM SPO-2664 SLIDING PROBE FIXTURE USED WITH DC-10 REFERENCE STANDARD 7637987-15 Includes Certificate of Conformance | 1 | |
| 7637987-9 | A53-142 Douglas DC-9 7637987-9 Reference Standard Assembly 2024-T3 Clad Aluminum. Figure 1, Sheets 2&3 | 1 | |
| 77000DL00.01300.088 | STANDARD DIGITAL MULTIMETER | 1 | |
| 782-6MBC | STANDARD 6 DIA | 2 | |
| 787-9-HS-1 | Boeing Standard Previously 787-9-HS 55-10-10 55-10-05/06 R | 1 | |
| 787-9-HS-2 | Boeing Standard previously 787-9-HS 55-10-10 PFWEB PF UPR&LWR | 1 | |
| 787-FT-ET-18B | REFERENCE STANDARD 787-FT-ET-18B, | 1 | |
| 787-FT-UT-12-Ti | Boeing Standard Titanium | 1 | |
| 78755-01 | STANDARD STRAIGHT SUPPORT | 1 | |
| 78755-05 | STANDARD STRAIGHT SUPPORT | 1 | |
| 79204-25 | "PUMP - VACUUM, PORTABLE, STANDARD DUTY | 1 | |
| 7947479-10 | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 3 | |
| 7947479-10 I | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10 S | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10 TI | 6/4 TITANIUM STANDARD, AIR FORCE EDDY CURRENT STANDARD - USAF T.O. 33-B-1-1 | 1 | |
| 7947479-10 Ti | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10-304 | PH TOOL REFERENCE STANDARD STAINLESS SPEC USAF TO 33-B-1-1 | 1 | |
| 7947479-10-T | PH TOOL REFERENCE STANDARD TITANIUM SPEC USAF TO 33-B-1-1 | 2 | |
| 7947479-10/17-4PH | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10/304 | 304 STAINLESS STEEL STANDARD, AIR FORCE EDDY CURRENT STANDARD - USAF T.O. 33-B-1-1 | 1 | |
| 7947479-10/304SS | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 8-0-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 2 | |
| 8-1-N | STANDARD TOOL DIAMETER NUMBER (STDN) | 3 | |
| 8000CSA 12 1/2 X 3 | RIVETER/INSERTION TOOL, COMPLETE WITH FOOT CONTROL, HOSES, CONNECTORS, STANDARD ACCESSORIES GROUP AND HARDWARE. READY TO OPERATE. NOTE: DOES NOT INCLUDE PEDESTAL STAND. | 1 | |
| 8000CSA 12 1/2 x 3 | Riveter/Insertion tool, complete with foot control, hoses, connectors, standard accessories group and hardware. Ready to operate. NOTE: Does NOT include pedestal stand. | 1 | |
| 8000CSA 24 1/2 x 3 | Riveter/Insertion tool, complete with foot control, hoses, connectors, standard accessories group and hardware. Ready to operate. NOTE: Does NOT include pedestal stand. | 1 | |
| 8000CSA 9 1/2 x 3 | Riveter/Insertion tool, complete with foot control, hoses, connectors, standard accessories group and hardware. Ready to operate. NOTE: Does NOT include pedestal stand. | 1 | |
| 80RS10 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS11 | MD-80 REFERENCE STANDARD 57.80.007 | 1 | |
| 80RS12 | MD-80 REFERENCE STANDARD | 1 | |
| 80RS13 | MD-80 REFERENCE STANDARD 57.80.012 | 1 | |
| 80RS14 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS15 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS16 | MD-80 REFERENCE STANDARD | 1 | |
| 80RS18 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS19 | Ultrasonic Inspection Reference standard MD-80 | 1 | |
| 80RS21 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS22 | Ultrasonic Inspection Reference standard MD-80 | 3 | |
| 80RS3 | MD-80 REFERENCE STANDARD | 1 | |
| 80RS4 | Ultrasonic Inspection Reference standard MD-80 | 1 | |
| 80RS5 | MD-80 REFERENCE STANDARD | 1 | |
| 80RS6 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS7 | Ultrasonic Inspection Reference standard MD-80 | 1 | |
| 80RS8 | MD-80 REFERENCE STANDARD | 1 | |
| 80RS9 | MD-80 REFERENCE STANDARD | 1 | |
| 810-218D | Ref. Standard set for Harness Tester (t) | 1 | |
| 81091004 | EASA STANDARD TOOL BOX | 1 | |
| 812.350.11 | UCAS Standard Platform variable height 2.2m | 1 | |
| 81490004 | STANDARD COVER PLATE | 1 | |
| 8500C | BALANCER/ANALYZER W/ STANDARD ACCESSORIES | 4 | |
| 8500C+ | Balancer/Analyzer w/ Standard Accessories | 4 | |
| 85ACF | STANDARD CUTTER | 1 | |
| 871087-2 | STANDARD TP PISTOLE | 1 | |
| 8784B-NB | US DOT STANDARD 3600PSI NITROGEN BOTTLE FOR PART # 8784B | 1 | |
| 8784B-SPC | SPECIAL PAINT COLOUR FOR PART # 8784B (STANDARD COLOUR IS SAFETY YELLOW) | 1 | |
| 8800-3 | 8800-3;3 Yr Total HW Warranty + Standard Calibrations - SILVER-3 | 1 | |
| 8800-5 | 8800-5;5 Yr Total HW Warranty + Standard Calibrations - SILVER-5 | 1 | |
| 8800-R-SILVER | 8800-R-SILVER;1yr. Renewal Standard Full Maintenance Contract 8800SX Existing Equipment | 1 | |
| 8818471000 | STANDARD TOOL CASE | 1 | |
| 895-3900-06-101 | BOX ELECTROAVIONIC, STANDARD TOOLS | 1 | |
| 8C2504 | ADAPTER, BRACKET - STANDARD ROLLOVER STAND | 1 | |
| 90-002 | NOVA® STANDARD Motor .3 HP, 2800 RPM | 1 | |
| 90-006 | NOVA® STANDARD Motor, 3200rpm, 0.5 hp | 2 | |
| 90-025 | NOVA® STANDARD 90° Angle Head | 1 | |
| 90-027 | NOVA® STANDARD 45° Angle Head | 1 | |
| 90-030 | NOVA® STANDARD 360° Angle Head | 1 | |
| 90-LS1003 | Bowers Lead standard for 'V' threads, 3/4" TPF | 1 | |
| 90-LS1004 | Bowers Lead standard for straight threads, NPS threads | 1 | |
| 90-LS5003M | Bowers Lead standard for metric threads | 1 | |
| 90-LS5004M | Bowers Metric Lead Standard 1, 1.5, 2,3 & 4mm | 1 | |
| 900 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 901-10800-2 | BALANCER/ANALYZER W/ STANDARD ACCESSORIES | 3 | |
| 901-14990 | BALANCER/ANALYZER W/ STANDARD ACCESSORIE | 2 | |
| 9080317 | CONDUCTIVITY STANDARD 11 MS/M (18 IACS) | 1 | |
| 9080325 | CONDUCTIVITY STANDARD 16 MS/M (28 IACS) | 1 | |
| 9080341 | CONDUCTIVITY STANDARD 22 MS/M (38 IACS) | 1 | |
| 9080350 | CONDUCTIVITY STANDARD 30 MS/M (52 IACS) | 1 | |
| 9080708 | CALIBRATION STANDARD SET (3 STDS) 20 TO 40 IACS (30 IACS); (42 IACS); (60 IACS) | 1 | |
| 9081003 | CALIBRATION STANDARD SET (2 STDS.) 4.4 MS/M (8 IACS);58 MS/M (100 IACS) | 1 | |
| 915-26514 | BALANCER/ANALYZER W/ STANDARD ACCESSORIES | 2 | |
| 9213012 | SURFACE PROBE, STANDARD BRIDGE DETACHABLE SURFACE | 1 | |
| 9213550 | SURFACE PROBE, STANDARD REFLECTION DETACHABLE SURFACE PROBE WITH A DIAMETER OF .25 IN. (6.3 MM) AND | 1 | |
| 9216656 | ROTATING SCANNER STANDARD R/A KIT | 1 | |
| 9222193 | SURFACE PROBE, POWERLINK STANDARD BRIDGE DETACHABLE SURFACE PROBE WITH A DIAMETER OF .62 IN. (15.7 M | 1 | |
| 9222305 | CALIBRATION STANDARD VM30889-C1A 480 KHZ CONDUCTIVITY PROBE | 1 | |
| 9300GSBFMUYO | MECHANIC STANDARD TOOL | 1 | |
| 9317796 | 9317796 : S-MP-3 STANDARD .5'' S-MP-3 MECHANICAL IMPEDANCE ANALYSIS PROBE, STANDARD, RIGHT ANGLE PRO | 1 | |
| 9317808 | 9317808 : S-MP-4 STANDARD .25' RIGHT ANGLE MIA PROBE, SMALL 6.35 MM (0.25") TIP DIAMETER, REQUIRES B | 1 | |
| 9322075 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 | |
| 935-14-72/DB | SEMI-STANDARD PLATINUM RESISTANCE THERMOMETER | 1 | |
| 9471M17P01 | STANDARD LRU JACK | 3 | |
| 9481M78 | ADAPTER - BRACKET-STANDARD ROLLOVER STAND | 1 | |
| 9481M78G01 | Adapter,bracket-standard rollover stand | 1 | |
| 95-92134-0001 | ELECTRIC AND/OR ELECTRONIC STANDARD TOOL KIT | 1 | |
| 9522103 | CONDUCTIVITY STANDARD BLOCK | 1 | |
| 9522321 | CONDUCTIVITY STANDARD SET | 1 | |
| 954-2399 | STANDARD COMPASS FOR COMPASS SWING | 5 | |
| 97880831 | WRENCH:COMBINATION STANDARD SET ... | 1 | |
| 981-102 | ANGLE STANDARD | 1 | |
| 98669 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| 98A09001000000 | BAR-TOWING SUPSD BY STANDARD TOWBAR | 1 | |
| 98A52003000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A52003001 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A52003002 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A52003003 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 98A52003004 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A53003003 | Ultrasonic Inspection reference standard A300 | 1 | |
| 98A53803006000 | STANDARD CALIBRATION | 2 | |
| 98A53803016 | Ultrasonic Inspection reference standard A300 | 1 | |
| 98A53803018000 | Ultrasonic Inspection Reference Standard A300-600 | 2 | |
| 98A53803019000 | Ultrasonic Inspection Reference standard A300 | 3 | |
| 98A5380302000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-10-46 Page 404 Figure 404. Material:7050. Includes Test Report and Certificate of Conformance. | 1 | |
| 98A53803020000 | Ultrasonic Inspection Reference standard A300 | 3 | |
| 98A54003019 | AIRBUS A300 REFERENCE STANDARD PART 4 54-40-00 PG. 13 FIGURE 8, SSI NO. 54-10-07. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| 98A54003069 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A54003072 | AIRBUS A300 REFERENCE STANDARD PART 4 54-40-00 PG.25 FIGURE 16, SSI NO. 54-40-09. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| 98A54003072000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 54-50-23 Page 404 Figure 403. Material: 30NCD16 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| 98A54003073 | IRBUS A300 REFERENCE STANDARD PART 4 54-40-00 PG.28 FIGURE 21, SSI NO. 54-40-09. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| 98A54003073000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 54-50-23 Page 404 Figure 403. Material: Titanium. Includes Test Report and Certificate of Conformance. | 3 | |
| 98A54003074 | AIRBUS A300 REFERENCE STANDARD PART 4 54-40-00 PG.19 FIGURE 12, SSI NO. 54-40-07. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| 98A54003074000 | AIRBUS A300-600 CALIBRATION STANDARD PART 4 54-50-15 PAGE 404 FIGURE 403. Includes Test Report and Certificate of Conformance. | 3 | |
| 98A54003075 | AIRBUS A300 REFERENCE STANDARD PART 4 54-40-00 PG. 5 FIGURE 3, SSI NO. 54-10-03 Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 2 | |
| 98A54003077 | AIRBUS A300 REFERENCE STANDARD PART 4 54-40-00 PG. 5 FIGURE 3, SSI NO. 54-10-03. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 2 | |
| 98A54003096 | AIRBUS A310 REFERENCE STANDARD PART4 54-50-20 PAGE 402 FIGURE 401. Includes Test Report and certificate of Conformance. | 1 | |
| 98A54003096000 | STANDARD CALIBRATION | 3 | |
| 98A54003097000 | STANDARD CALIBRATION | 2 | |
| 98A54003098000 | STANDARD CALIBRATION | 1 | |
| 98A54603008000 | STANDARD REFERENCE | 1 | |
| 98A57103011 | Surface Standard with .2, .5, 1mm Notches, 2024T6 | 1 | |
| 98A57103016 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A57103016001 | Ultrasonic Inspection Reference standard A300-600 | 2 | |
| 98A57103017000 | AIRBUS A300-600 CALIBRATION STANDARD PART 6 57-10-29 PAGE 604 FIGURE 603. Includes Test Report and Certificate of Conformance. | 1 | |
| 98A57103020000 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 98A57103023000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 98A57103030000 | PLATE-STANDARD DRILLING | 1 | |
| 98D10203500000 | MOORING KIT-NLG (BASIC STANDARD TOWING BRACKET) | 7 | |
| 98D10203500004 | MOORING KIT - NLG (BASIC STANDARD TOWING B) | 8 | |
| 98D36109001000 | LEAP ENGINE STANDARD BLEED TEST EQUIPMENT | 9 | |
| 98DNSA20206060 | STANDARD RIGGING PIN, 6MM X 60MM | 29 | |
| 98F29003000000 | WRENCHES-STANDARD TORQUE SET | 15 | |
| 98F29003000000-57 | WRENCHES-STANDARD TORQUE SET | 1 | |
| 98F32401001000 | STANDARD WHEEL R AND I DOLLY TYPE | 15 | |
| 98F71203010000 | STANDARD TOOL FCD FLAG | 5 | |
| 98L2409004 | STANDARD HOIST | 1 | |
| 98L2409004000 | STANDARD HOIST ASSEMBLY | 1 | |
| 98L24209004000 | STANDARD HOIST | 2 | |
| 98L29003002000 | TOOL SET,STANDARD TORQUE | 6 | |
| 98L53509010000 | LADDER, STANDARD - S19 | 2 | |
| 98L53509011000 | PLATFORM, STANDARD - S19 | 2 | |
| 98L53509011104 | STANDARD PLATFORM S19 | 1 | |
| 98L53509011106 | STANDARD PLATFORM S19 | 1 | |
| 98S51605001-200 | ATR REFERENCE STANDARD ATR42-400/500 Part 6 51-60-00 Page 628 Figure 615. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 4 | |
| 98S51605001-202 | ATR REFERENCE STANDARD ATR42-400/500 Part 6 51-60-00 Page 628 Figure 615. Material: 15-5PH. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S51605001-204 | ATR REFERENCE STANDARD PT 6 51-60-00. MATERIAL: TITANIUM TA6V(6AL-4V). Includes Test Report and Certificate of Conformance. | 3 | |
| 98S51605001-212 | ATR REFERENCE STANDARD 2024-T3 Aluminum PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes: ( 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm, 12.7mm, 13.5mm, 14mm ). Includes Test Report and Certificate of C... | 4 | |
| 98S51605001-214 | ATR REFERENCE STANDARD 15-5PH Steel PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes: ( 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm, 12.7mm, 13.5mm, 14mm ). Includes Test Report and Certificate of Confo... | 4 | |
| 98S51605001-216 | ATR REFERENCE STANDARD ..TA6V(6AL-4V) Titanium PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes: ( 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm, 12.7mm, 13.5mm, 14mm ). Includes Test Report and Certifica... | 3 | |
| 98S51605001-218 | ATR REFERENCE STANDARD 2024-T3 Aluminum PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 3.6mm, 4mm, 4.8mm, 5.2mm, 5.7mm, 6.4mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm ). Includes Test Report and Certificat... | 3 | |
| 98S51605001-220 | ATR REFERENCE STANDARD PT 6 51-60-00 15-5PH stainless steel Calibration Standard for Rotary Probes Figure 616 (Sheet 1) Page 629, Hole Sizes:( 3.6mm, 4mm, 4.8mm, 5.2mm, 5.7mm, 6.4mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm ). Includes Test Report and Certifi... | 4 | |
| 98S51605001-222 | ATR REFERENCE STANDARD TA6V(6AL-4V) Titanium PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 3.6mm, 4mm, 4.8mm, 5.2mm, 5.7mm, 6.4mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm ). Includes Test Report and Cert... | 3 | |
| 98S51605001-224 | ATR REFERENCE STANDARD 2024-T3 Aluminum PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 14.3mm, 14.6mm, 15.1mm, 15.9mm, 16.3mm, 16.7mm, 28.9mm, 19.8mm, 22.2mm, 22.6mm, 23mm ). Includes Test Report and... | 4 | |
| 98S51605001-226 | ATR REFERENCE STANDARD 15-5PH Steel PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 14.3mm, 14.6mm, 15.1mm, 15.9mm, 16.3mm, 19.0mm, 19.4mm, 19.8mm, 22.2mm, 22.6mm, 23mm ). Includes Test Report and Cer... | 3 | |
| 98S51605001-228 | ATR REFERENCE STANDARD TA6V(6AL-4V) Titanium PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 14.3mm, 14.6mm, 15.1mm, 15.9mm, 16.3mm, 19.0mm, 19.4mm, 19.8mm, 22.2mm, 22.6mm, 23mm ). Includes Test Repor... | 3 | |
| 98S51605001-230 | ATR REFERENCE STANDARD ATR72 Part 6 51-60-00 Page 630 Figure 616. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 4 | |
| 98S51605001-232 | ATR REFERENCE STANDARD ATR72 Part 6 51-60-00 Page 630 Figure 616. Material: 15-5PH. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S51605001-234 | ATR REFERENCE STANDARD ATR72 Part 6 51-60-00 Page 630 Figure 616. Material: Titanium. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S520305008-200 | ATR72 REFERENCE STANDARD PT 6 52-31-04 PAGE 603 FIGURE 601. Material: 2024-T62. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S52305005-000 | ATR CALIBRATION STANDARD PT 4 53-31-04 PAGE 404 FIGURE 401. MATERIAL: 2024-T3, 15-5 CRES. Includes Test Report and Certificate of Conformance. | 4 | |
| 98S52305005000 | CALIBRATION STANDARD HL1 | 4 | |
| 98S52305008-200 | ATR REFERENCE STANDARD ATR72 Part 6 52-31-04 Page 603 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005005-000 | ATR CALIBRATION STANDARD Part 6 53-31-01 Page 607 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005006-000 | ATR CALIBRATION STANDARD Part 6 53-31-01 Page 606 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005008-000 | ATR CALIBRATION STANDARD Part 6 53-31-21 Page 608 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005009-000 | ATR CALIBRATION STANDARD Part 6 53-51-02 Page 606 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005010-000 | ATR CALIBRATION STANDARD Part 6 53-51-03 Page 606 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005011-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-31-21 FIGURE 601 SHEETS 1&2 PAGE 608 & 609. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005012-000 | ATR CALIBRATION STANDARD Part 6 53-81-14 Page 606 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005013-000 | ATR CALIBRATION STANDARD Part 6 53-81-14 Page 607 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005014-006 | STANDARD CALIBRATION TOOL | 1 | |
| 98S53005014006 | STANDARD CALIBRATION TOOL | 1 | |
| 98S53005014008 | CALIBRATION STANDARD ( SKIN LAP JOINT) | 1 | |
| 98S53005015-000 | ATR CALIBRATION STANDARD Part 6 53-51-01 Page 608 Figure 601. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005016-000 | ATR Standard ATR42 PT4 53-51-20 PG 407/408 FG 402 | 3 | |
| 98S53005017-000 | ATR CALIBRATION STANDARD Part 6 53-81-16 Page 606 Figure 601. Material: 2024-T3, 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005018-000 | ATR CALIBRATION STANDARD Part 6 53-81-16 Page 607 Figure 601. Material: 2024-T3, 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005020-000 | ALUMINUIM CALIBRATION STEP WEDGE STANDARD FOR ET | 4 | |
| 98S53005020-000/1 | ATR CALIBRATION STANDARD ATR72 Part 6 53-00-01 Page 608 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S53005020-000/2 | ATR CALIBRATION STANDARD ATR72 Part 6 53-00-01 Page 609 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S53005020-200 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-202 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-204 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-206 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-208 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005020-210 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-212 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-214 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-216 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020000 | ALUMINUIM CALIBRATION STEP WEDGE STANDARD FOR ET | 4 | |
| 98S53005021-000 | ATR72 Calibration Standard Drawing PT6 53-51-01 PG 608, Figure 601 | 3 | |
| 98S53005021000 | STANDARD NDT | 3 | |
| 98S53005024-000 | ATR CALIBRATION STANDARD 53-61-03 PT6 PG 606 | 2 | |
| 98S53005025-000 | ATR CALIBRATION STANDARD 53-61-02 PT 6 PG 606 | 2 | |
| 98S53005026-000 | ATR CALIBRATION STANDARD 53-61-01-PT6 PG 606 | 2 | |
| 98S53005027-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-61-01 FIGURE 606 SHEET 1. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005028-000 | ATR CALIBRATION STANDARD 53-31-04 PT 6 PG 606 | 2 | |
| 98S53005029-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-31-01 FIGURE 601 SHEET 1. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005030-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-31-21 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005031-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-31-04 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005032-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-61-01 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005033-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-61-02 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53105000-200 | ATR72 CALIBRATION STANDARD PART 6 53-11-23 PAGE 612 FIGURE 603. MATERIAL: 15-5PH Steel. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53305002-200 | CALIBRATION STANDARD - ATR72 | 4 | |
| 98S53305002-200/19MM | ATR Standard w/ 19mm Lug Hole, ATR72 PT4 53-37-06:PG405 FIG401 SHEET2, 2024T3, .685 thick | 1 | |
| 98S53305002-200/23MM | ATR Standard w/ 23mm Lug Hole, ATR72 PT4 53-37-06:PG405 FIG401 SHEET2, 2024T3, .685 Thick | 1 | |
| 98S53305002200 | CALIBRATION STANDARD FOR UT | 4 | |
| 98S53305004-000 | ATR REFERENCE STANDARD PT 5 53-51-01 Figure 501, Page 506 Does not include Stringer Hook. Material: 2024-T3 Aluminum. | 5 | |
| 98S53305005000 | SKIN STRINGER CALIBRATION STANDARD (ULTRASON) | 5 | |
| 98S53505003-200 | ATR CALIBRATION STANDARD ATR72 Part 4 53-56-01 Page 405 Figure 402. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 4 | |
| 98S53505003000 | CALIBRATION STANDARD FOR SSI -57-12-12 | 1 | |
| 98S53505003200 | CALIBRATION STANDARD FOR UT | 4 | |
| 98S53505004000 | SKIN CALIBRATION STANDARD STRG;11 AND STRG;17 | 1 | |
| 98S53505005000 | SKIN CALIBRATION STANDARD STRG.4 | 1 | |
| 98S53505006-000 | ATR REFERENCE STANDARD PT 4 53-51-23 FIG 403. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 4 | |
| 98S53505006000 | CALIBRATION STANDARD FOR UT | 4 | |
| 98S53605002000 | CALIBRATION STANDARD STR.3, 11ET17 | 1 | |
| 98S53805002-000 | ATR REFERENCE STANDARD 53-61-18 PT 6 FIGURE 603 PAGE 609. INSPECTION OF REAR PRESSURE BULKHEAD PERIPHERY OF DOME SKIN AND CONNECTION WITH VERTICAL FLANGE OF DOME VERTICLAL CHORD. Includes Test Report traceable to NIST and Certificate of Conformance. | 6 | |
| 98S53805002000 | CALIBRATION STANDARD TOOL | 6 | |
| 98S53805003000 | SKIN CALIBRATION STANDARD STR.4 AND 17 | 1 | |
| 98S54305001-200 | ATR REFERENCE STANDARD Part 4 54-31-70 Page 403 Figure 401. Material: 15CDV6. Includes Test Report and Certificate of Conformance. | 4 | |
| 98S54305001-202 | ATR REFERENCE STANDARD 54-31-70 PT 4 FIG 401. Includes Test Report and Certificate of Conformance. | 4 | |
| 98S54305002-200 | ATR REFERENCE STANDARD ART72 Part 4 54-31-70 Page 403 Figure 401. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 5 | |
| 98S57105003-200 | ATR REFERENCE STANDARD Part 4 57-15-21 Page 403 Figure 401. Material: 35NCD16(4340). Includes Test Report and Certificate of Conformance. | 4 | |
| 98S57105004-200 | ATR CALIBRATION STANDARD ATR72 Part 4 57-15-21 Page 403 Figure 401. Material: 34NCD16(4340). Includes Test Report and Certificate of Conformance. | 4 | |
| 98S57105005-200 | ATR CALIBRATION STANDARD Part 4 57-12-11 Page 404 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 4 | |
| 98S57105006-200 | ATR CALIBRATION STANDARD ATR72 Part 4 57-12-11 Page 404 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105007-200 | ATR CALIBRATION STANDARD ATR72 Part 4 57-14-03 Page 403 Figure. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105009-200 | ATR REFERENCE STANDARD PT 4 57-15-10 PAGE 403 FIGURE 401. 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105010-200 | ATR REFERENCE STANDARD PT 4 57-15-10 PAGE 403 FIGURE 401. TA6V TITANIUM. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105010201 | CALIBRATION TOOL STANDARD NDT | 1 | |
| 98S57105011-200 | ATR CALIBRATION STANDARD Part 4 57-15-11 Page 403 Figure 401. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105012-200 | ATR REFERENCE STANDARD PT 4 57-15-11 PAGE 403 FIGURE 401. 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105013004 | CALIBRATION TOOL STANDARD NDT | 1 | |
| 98S57105014001 | CALIBRATION TOOL STANDARD NDT | 2 | |
| 98S57105014002 | CALIBRATION TOOL STANDARD NDT | 2 | |
| 98S57105014003 | CALIBRATION TOOL STANDARD NDT | 2 | |
| 98S57105015 | Calibration Standard Drawing 57-14-03, Figure 401 | 1 | |
| 98S57105015-200 | ATR REFERENCE STANDARD ATR72 Part 4 57-14-03 Page 403 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105016-200 | ATR CALIBRATION STANDARD Part 6 57-14-04 Page 603 Figure 601. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105019-200 | ATR CALIBRATION STANDARD Part 6 57-14-01 Page 603 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105019000 | CALIBRATION TOOL STANDARD NDT | 1 | |
| 98S57105019200 | CALIBRATION STANDARD FOR NTM 57 14 1 | 3 | |
| 98S57105030-200 | ATR CALIBRATION STANDARD Part 4 57-12-12 Page 404 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 4 | |
| 98S57105031-200 | ATR REFERENCE STANDARD ATR42-400/500 Part 4 57-12-12 Page 404 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S57105032-200 | ATR72 Calibration Standard Drawing PT4 57-12-12 PG 404, Figure 401 | 3 | |
| 98S57105032-202 | ATR72 Calibration Standard Drawing PT4 57-12-12 PG 405, Figure 402 | 3 | |
| 98S57105033-200 | ATR REFERENCE STANDARD ATR42-400/500 Part 4 57-12-11 Page 404 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S57105034-200 | ATR REFERENCE STANDARD ATR42-400/500 Part 4 57-14-03 Page 403 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S57105034200 | CALIBRATION STANDARD FOR SSI -57-12-12 | 1 | |
| 98S57205011000 | CALIBRATION STANDARD FOR SSI -57-12-12 | 1 | |
| 98S57205024-200 | ATR REFERENCE STANDARD PT 4 57-24-09 PAGE 403 FIGURE 401. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57205025-200 | ATR REFERENCE STANDARD Part 4 57-24-10 Page 403 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57205026-200 | ATR REFERENCE STANDARD Part 4 57-24-12 Page 403 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57205027-200 | ATR REFERENCE STANDARD Part 4 57-24-13 Page 403 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57205027-202 | ATR REFERENCE STANDARD Part 4 57-24-13 Page 404 Figure 402. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57205029000 | CALIBRATION STANDARD FOR SSI -57-12-12 | 1 | |
| 98S57205030.001 | ATR72 REFERENCE STANDARD SET OF 5 | 4 | |
| 98S57205030.001-.005 | ATR72 REFERENCE STANDARD SET OF 5 PT 4 51-40-00 | 1 | |
| 98S57205030.004 | UT CALIBRATION REFERENCE STANDARD , STEP WEDGE, 7000 SERIES ALUMINUM, GENERIC | 5 | |
| 98S57205030.005 | ATR72 REFERENCE STANDARD SET OF 5 | 2 | |
| 98S57205030001 | UT CARBON CALIBRATION STANDARD AS PER ATR 72 NTM 57-24-08 | 4 | |
| 99-2642 | STANDARD INLINE NOSE ASSEMBLIES | 8 | |
| 99-8033-6000 | COVER-MAIN LANDING WHEEL STANDARD TIRES | 1 | |
| 99-8034-6000 | COVER-NOSE LANDING WHEEL STANDARD TIRES | 1 | |
| 9953103002000 | Airbus Standard Fig 53-15-991-003A Sheet 1 page 6 | 1 | |
| 9970 958 579 | STANDARD CFM56 | 1 | |
| 999-3582-503 | STANDARD DOOR BLOCKER, LEFT AND RIGHT. | 1 | |
| 99A-510-03000-000 | Calibration Standard NDT | 2 | |
| 99A51003000000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-00-02 Page 603/604 Figure 602. Includes Test Report an Certificate of Conformance. | 2 | |
| 99A51107299001 | STANDARD CALIBRATION | 5 | |
| 99A51107300000 | AIRBUS A330 REFERENCE STANDARD FOR SUBSURFACE CRACKS IN AL-ALLOY 51-10-16-991-011-A. PART 6, PAGE 615 FIGURE 610PROCEDURE B. Includes Test Report and Certificate of Conformance... | 5 | |
| 99A51107300000-7075 | AIRBUS REFERENCE STANDARD A330 Part 6 51-10-16 Page 615 Figure 610. Material: 7075. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53003001001 | STANDARD CALIBRATION | 1 | |
| 99A53003001100 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 6AL-4V TITANIUM. Includes Test Report an Certificate of Conformance. | 4 | |
| 99A53003001101 | STANDARD CALIBRATION | 8 | |
| 99A53003001101/A1 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. Note: Holes A1-A6 | 2 | |
| 99A53003001101/A13 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. Note: Holes A13-A18 | 1 | |
| 99A53003001101/A7 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. Note: Holes A7-A12 | 1 | |
| 99A53003001102 | CALIBRATION STANDARD (STEEL 35NCD16) | 5 | |
| 99A53003001103 | CALIBRATION STANDARD (AL, AU4G OR 2017A) | 4 | |
| 99A53003001104 | CALIBRATION STANDARD (TI, TA6V) | 4 | |
| 99A53003001105 | CALIBRATION STANDARD (ST, 35NCD16) | 4 | |
| 99A53003001106 | CALIBRATION STANDARD (AL, AU4G OR 2017A) | 4 | |
| 99A53003001107 | CALIBRATION STANDARD (TI, TA6V) | 4 | |
| 99A53003001108 | CALIBRATION STANDARD (ST, 35NCD16) | 4 | |
| 99A53003002000 | Ultrasonic Inspection Reference standard A310 | 1 | |
| 99A53003003001101 | ROTARY CALIBRATION STANDARD ALUMINUM | 2 | |
| 99A53003005001 | AIRBUS REFERENCE STANDARD A300-600/ A310 PT 4 53-12-52 PG.404 FIGURE 404. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53103002000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 53-12-50 Page 407/408 Figure 403 Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53103003000 | AIRBUS A300-600 CALIBRATION STANDARD PART 4 53-12-20 PAGE 407 FIGURE 403. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53107215000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 53-31-81 99A53107215000. Includes Test Report and Certificate of Conformance. | 5 | |
| 99A53107251000 | Ultrasonic Inspection Reference standard A310 | 2 | |
| 99A53107265001 | AIRBUS REFERENCE STANDARD A300-600 PT 6 53-19-21 Page 606 Figure 604, Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53107282000 | AIRBUS REFERENCE STANDARD A300 Part 6 53-30-00 Page 6A/6B Figure 3A Material: 2024-T4 and 17-4PH Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53107283000 | AIRBUS A330 REFERENCE STANDARD 7075-T7451 ALUMINUM. PART 4 53-40-18-270-801-A-01 - Bulk Cargo Compartment Door Cut-out Lateral Frame at Bulk Door-Fittings, FR67 at STGR37 and FR69 at STGR38, RH, FIGURE 53-40-18-991-015-A. Includes Test Report and Cer... | 2 | |
| 99A53107287000 | AIRBUS REFERENCE STANDARD A318-A321 52-31-16. Includes Test Report and Certificate of Conformance. | 7 | |
| 99A53107290000 | AIRBUS REFERENCE STANDARD A300-600 PT6 53-19-24 FIGURE 604, PG. 604 . Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53203005000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 53-12-11 Page 407/408 Figure 403. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53203007000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 53-12-23 Paghe 404 Figure 403, Material: 2024 ro Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53307203000 | CALIBRATION STANDARD - | 1 | |
| 99A53307225000 | AIRBUS A300 REFERENCE STANDARD PART 6; 53-30-20 | 1 | |
| 99A53307236000 | STANDARD CALIBRATION | 4 | |
| 99A53307244000 | Airbus Standard A300 53-30-30 Part 5 FIG 3 PG8 | 1 | |
| 99A53307264000 | CALIBRATION STANDARD SET | 1 | |
| 99A53307274000 | Ultrasonic Inspection Reference standard A318-312-320-321 | 5 | |
| 99A53307274000-7075 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 6 51-10-16 Page 7 Figure 51-10-16-991-005-A. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53307292001 | AIRBUS REFERENCE STANDARD A318-A321 51-10-15-991-004-A. Includes Test Report and Certificate of Conformance. | 4 | |
| 99A53307294000 | STANDARD REFERENCE | 2 | |
| 99A53403003001 | AIRBUS REFERENCE STANDARD A300-600 53-15-23 FIGURE 603 PROCEDURE A PG. 605-606 . Includes Test Report and Certificate of Conformance. | 3 | |
| 99A53403005001 | AIRBUS REFERENCE STANDARD PT 6 53-12-25 PAGE 605 FIGURE 604. . Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53403007000 | AIRBUS REFERENCE STANDARD A300-600 Part 6 53-15-78 Part 8 Page 604 Figure 603. Material: 2024-T3. Inlcudes Test Report and Certificate of Conformance. | 2 | |
| 99A53407285000 | Airbus Standard A318/A319/A320/A321 53-30-01 PG9 | 1 | |
| 99A53507286000 | AIRBUS REFERENCE STANDARD A330 PT 4 53-51-09. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A53803004001 | AIRBUS REFERENCE STANDARD A300-600 53-15-23 FIGURE 603 PROCEDURE A PG. 605-606 . Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53803009000 | Ultrasonic Inspection Reference standard A300 | 2 | |
| 99A53803019 | AIRBUS REFERENCE STANDARD A300-600ST 53-15-43 FIGURE 403 PAGE 404 . Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53803024000 | NDT REF STANDARD TOOL | 1 | |
| 99A54403002000 | Ultrasonic Inspection Reference standard A300 | 3 | |
| 99A54403003000 | Ultrasonic Inspection Reference standard A300-600 | 2 | |
| 99A54403004000 | AIRBUS REFERENCE STANDARD A300-600 A300-54-6015. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A5440302000 | NDT REF STANDARD BLOCK TOOL | 1 | |
| 99A55107271000 | AIRBUS STANDARD 55-10-22 FIG 403 PG407 | 1 | |
| 99A55107288000 | Ultrasonic Inspection Reference standard A300-600 | 2 | |
| 99A55107289000 | Ultrasonic Inspection Reference standard A300-600 | 2 | |
| 99A55109003000 | Ultrasonic Inspection Reference standard A300-600 | 1 | |
| 99A55109005000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 99A55407291000 | Airbus Standard for Woodpecker, A310 PT5 51-10-19:FIG503 PG507 | 5 | |
| 99A55407322000 | AIRBUS REFERENCE STANDARD A330 Part 9 - Visual 55-40-00 Page 906 Figure 904 Material: Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A55507222000 | Ultrasonic Inspection Reference standard A300-600 | 1 | |
| 99A55507240000 | Ultrasonic Inspection Reference standard A300-600 | 1 | |
| 99A55507253000 | Ultrasonic Inspection Reference standard A300-600 | 1 | |
| 99A57004001285 | Ultrasonic Inspection Reference standard A300 | 2 | |
| 99A57004001289 | STANDARD CALIBRATION | 1 | |
| 99A57004001290 | STANDARD CALIBRATION | 1 | |
| 99A57004001291 | Airbus Standard A300-600 57-53-05 PT4 PG404 | 1 | |
| 99A57004001292 | AIRBUS A300-600 CALIBRATION STANDARD PART 4 57-54-04 PAGE 405 FIGURE 403. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57004001320 | Ultrasonic Inspection Reference Standard A310 | 2 | |
| 99A57004009000 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 99A57004010000 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 99A57004012000 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 99A57004101000 | AIRBUS REFERENCE STANDARD 57-21-25-270-801-A01 use green primer and silver metallic top coat for paint | 6 | |
| 99A57004101000-MOD | AIRBUS REFERENCE STANDARD WITH CERTIFICATE | 1 | |
| 99A57103000 | Ultrasonic Inspection Reference standard A310 | 1 | |
| 99A57103000100 | Airbus Standard A310 PT4 57-10-13:PG404 FIG403 | 1 | |
| 99A57103000101 | Airbus Standard A310 PT4 57-10-13:PG404 FIG403 | 1 | |
| 99A57103000102 | Airbus Standard A310 PT4 57-10-13:PG404 FIG403 | 1 | |
| 99A57103000103 | Airbus Standard A310 PT4 57-10-13:PG404 FIG403 | 1 | |
| 99A57103001000 | Ultrasonic Inspection Reference Standard A310 | 1 | |
| 99A57103003000 | Ultrasonic Inspection Reference Standard A310 | 1 | |
| 99A57103005002 | Ultrasonic Inspection Reference standard A310 | 3 | |
| 99A57103007000 | Ultrasonic Inspection Reference Standard A300-600 | 2 | |
| 99A57103009000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-10-44 Page 405 Figure 403. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57103010000 | Ultrasonic Inspection Reference Standard A300-600 | 2 | |
| 99A57103011000 | Ultrasonic Inspection Reference Standard A300 | 2 | |
| 99A57103012000 | Ultrasonic Inspection Reference Standard A300 | 2 | |
| 99A57103015000 | AIRBUS A300-600 CALIBRATION STANDARD PART 4 57-10-34 PAGE 405/406 FIGURE 403. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103025001 | Ultrasonic Inspection Reference Standard A300 | 3 | |
| 99A57103028000 | Ultrasonic Inspection Reference Standard A300-600 | 3 | |
| 99A57103029000 | Ultrasonic Inspection Reference Standard A300 | 4 | |
| 99A57103030000 | Ultrasonic Inspection Reference standard A300 | 4 | |
| 99A57103031000 | Ultrasonic Inspection Reference Standard A300-600 | 2 | |
| 99A57103033000 | Ultrasonic Inspection Reference Standard A310 | 2 | |
| 99A57103034001 | AIRBUS A310 CALIBRATION STANDARD PART 4 57-10-28 PAGE 411/412 FIGURE 403 | 1 | |
| 99A57103036000 | Ultrasonic Inspection Reference standard A310 | 2 | |
| 99A57103037000 | Ultrasonic Inspection Reference standard A310 | 1 | |
| 99A57103038000 | Ultrasonic Inspection Reference Standard A310 | 2 | |
| 99A57103041000 | Ultrasonic Inspection Reference Standard A300-600 | 3 | |
| 99A57103042000 | Ultrasonic Inspection Reference Standard A300-600 | 2 | |
| 99A57103043000 | Ultrasonic Inspection Reference Standard A300-600 | 2 | |
| 99A57103044000 | Ultrasonic Inspection Reference Standard A300-600 | 2 | |
| 99A57103045000 | REFERENCE STANDARD N | 2 | |
| 99A57103046000 | AIRBUS A300-600 CALIBRATION STANDARD PART 4 57-10-52 PAGE 415 FIGURE 403. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103048000 | AIRBUS A300-600 REFERENCE STANDARD PART 4 57-10-36 PAGE 407/408 FIGURE 403. MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103048001 | Airbus A300-600 Reference Standard Part 4 57-10-68 Page 409/410 figure 403. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103050000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-10-64 Page 407/408 Figure 403 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103051000 | AIRBUS STANDARD A300-600 PT4 57-10-22 PG 413/414 FG 403 | 1 | |
| 99A57103053000 | AIRBUS REFERENCE STANDARD A310 Part 4 57-10-07 Page 409/410 Figure 403 Material: 7175 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103054000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-10-24 Page 411/412 Figure 403 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103055000 | AIRBUS STANDARD A310 57-10-08 FIG 408 PG 403 | 1 | |
| 99A57103056000 | AIRBUS A300-600 REFERENCE STANDARD PART 4 57-10-50 PAGE 411 FIGURE 403. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| 99A571043001 | NDT REF STANDARD TOOL | 1 | |
| 99A57104329000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-21-04 Page 405 Figure 403. Material: L97(2024-T3) and BAEM1102(7075-T6). Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57104330000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-21-04 Page 406 Figure 404. Material: L97(2024-T3) and BAEM1102(7075-T6). Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57104331000 | Ultrasonic Inspection Ultrasonic Reference standard A300 | 1 | |
| 99A57104332000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 99A57104333000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 99A57104334000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 99A57104335000 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 99A57104336000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 99A57104337000 | Ultrasonic Inspection Reference standard A300 | 2 | |
| 99A57104338000 | Ultrasonic Inspection Reference standard A300 | 2 | |
| 99A57104340000 | Ultrasonic Inspection Reference standard A300 | 2 | |
| 99A57104353000 | Reference Standard | 2 | |
| 99A57104353001 | AIRBUS REFERENCE STANDARD A330 Part 4 57-26-08 Page 410 Figure 404 (Sheet 3) MATERIAL:2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 99A57104354000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-26-08 Page 406/407 Figure 403 (Sheet 2 and 3) Material: Delrin. lncludes Test Report and Certificate of Conformance. | 2 | |
| 99A57104355000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-26-08 Page 406/407 Figure 403 (Sheet 2 and 3) Material: Delrin. lncludes Test Report and Certificate of Conformance. | 3 | |
| 99A57104359000 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 99A57104361000 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 99A57204360000 | Ultrasonic Inspection Reference standard A300 | 2 | |
| 99A57204362000 | REFERENCE STANDARD 5100 | 3 | |
| 99A57204375000 | Ultrasonic Inspection Reference Standard A300 | 2 | |
| 99A57204379000 | Ultrasonic Inspection Reference Standard A300 | 2 | |
| 99A57204387000 | Ultrasonic Inspection Reference standard A310 | 3 | |
| 99A57204388000 | AIRBUS REFERENCE STANDARD A300-600 Part 6 57-21-58 Page 606 Figure 603. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57204390000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 99A57204390001 | Ultrasonic Inspection Reference Standard A300-600 | 1 | |
| 99A57204391001 | AIRBUS REFERENCE STANDARD A310 Part 6 57-25-26 Page 305 Figure 604. Material: 2024-T351. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57204392000 | Ultrasonic Inspection Reference standard A300 | 1 | |
| 99A57204393000 | Airbus Standard 310 57-25-30 PT4 PG403 | 1 | |
| 99A57204394000 | Ultrasonic Inspection Reference standard A310 | 4 | |
| 99A57204400000 | Ultrasonic Inspection Reference Standard A310 | 1 | |
| 99A57204401000 | Ultrasonic Inspection Reference standard A310 | 3 | |
| 99A57204402000 | Ultrasonic Inspection Reference Standard A310 | 2 | |
| 99A57204403000 | AIRBUS REFERENCE STANDARD A300 PT 4 57-00-11 FIG.3 SHEET 1 PG.5-6, A310 PT 4 57-51-24. MATERIAL 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| 99A57204403001 | Ultrasonic Inspection Reference standard A310 | 5 | |
| 99A57204406000 | Ultrasonic Inspection Reference Standard A300 | 2 | |
| 99A57204408000 | Ultrasonic Inspection Reference Standard A300 | 2 | |
| 99A57204409000 | Ultrasonic Inspection Reference Standard A300 | 1 | |
| 99A57204410000 | Airbus Standard A310 PT4 57-21-24:PG406 FIG403 - CAA+PRIMER+TOPCOAT | 2 | |
| 99A57204420000 | CALIBRATION STANDARD TOOL | 1 | |
| 99A57204425000 | Ultrasonic Inspection Reference Standard A300-60 | 2 | |
| 99A57204438001 | AIRBUS A310 REFERENCE STANDARD PART4 57-29-01 PAGE 406 FIGURE 403. Includes Test Report and certificate of Conformance. | 2 | |
| 99A57204453000 | AIRBUS A310 REFERENCE STANDARD PART4 57-29-01 PAGE 406 FIGURE 403. Includes Test Report and certificate of Conformance. | 1 | |
| 99A57204454000 | AIRBUS A310 REFERENCE STANDARD PART4 57-29-01 PAGE 407/408 FIGURE 404. Includes Test Report and certificate of Conformance. | 2 | |
| 99A57204455000 | AIRBUS A310 REFERENCE STANDARD PART4 57-29-01 PAGE 407/408 FIGURE 404. Includes Test Report and certificate of Conformance. | 2 | |
| 99A57404349000 | REFERENCE STANDARD 5100 | 1 | |
| 99A57504294000 | AIRBUS A300-600 CALIBRATION STANDARD PT 6 57-52-05 PAGE 606 FIGURE 602 (SHEET 2). MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57504296000 | AIRBUS REFERENCE STANDARD A300 57-42-11, A300-600 57-51-34 and A310 57-51-11 PART PAGE 404 FIGURE 403. Includes Test Report and Certificate of Conformance. | 3 | |
| 99A57703000000 | Ultrasonic Inspection Reference Standard A310 | 2 | |
| 99D5109001000 | CALIBRATION STANDARD SET AIRBUS | 1 | |
| 99D51103001000 | AIRBUS REFERENCE STANDARD NTM A318/A319/A320/A321, FIGURE 51-10-04-991-014-A. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D51103004000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Page 9 Figure 51-10-04-270-803-A-01. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D51103016000 | AIRBUS REFERENCE STANDARD NTM A318/A319/A320/A321, FIGURE 51-10-31-991-004-A. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D51107295000 | Ultrasonic Inspection Reference Standard A310 | 5 | |
| 99D51307001000 | AIRBUS REFERENCE STANDARD (WIFI BROADBAND) | 1 | |
| 99D51407291000 | STANDARD SET, CALIBRATION | 2 | |
| 99D51407291001 | STANDARD SET, CALIBRATION | 7 | |
| 99D51407291001 BLOCK 2 | STANDARD SET, CALIBRATION | 1 | |
| 99D51407291001-3 | Airbus Carbon Standard SET, ALL PT4 51-10-06:FIG402 PG404, Fabric Material #3 | 1 | |
| 99D52103001000 | Ultrasonic Inspection Reference standard A318-319-320-321 | 3 | |
| 99D52809001000 | STANDARD CALIBRATION | 1 | |
| 99D52809002000 | Airbus Standard A320 | 2 | |
| 99D52809004000 | AIRBUS REFERENCE STANDARD A318-A321 52-81-06-PB4. Includes Test Report and Certificate of Conformance. | 7 | |
| 99D53103000000 | Ultrasonic Inspection Reference standard A318-319-320-321 | 5 | |
| 99D53103001000 | STANDARD CALIBRATION | 2 | |
| 99D53103002000 | STANDARD CALIBRATION | 1 | |
| 99D53203000002 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 6 53-21-86 Page 604A/604B Figure 603 Material: 2024. Includes Test Report and Certificate of Conformance. | 5 | |
| 99D53203001000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 53-00-13-PB6 Page 6 Figure 53-00-13-991-003-A Sheet 1 Material 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D53207304000 | Ultrasonic Inspection Reference standard A318-319-320-321 | 5 | |
| 99D53409001000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 6 53-41-37 Page 605 Figure 602 Material: 2024 and 7075, Fasteners: NAS1097D5-6. Includes Test Report and Certificate of Conformance... | 5 | |
| 99D54403000004 | Ultrasonic Inspection Reference standard A318-319-320-321 | 7 | |
| 99D54403001000 | AIRBUS REFERENCE STANDARD A318/319/320/321 Part 6 54-51-01 Page 606 Figure 604 Material 35NCD16. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D54403001001 | Reference Standard 99D54403001001 | 1 | |
| 99D54403001002 | AIRBUS REFERENCE STANDARD 54-51-01-991-003-A, 4340 STEEL.HOLE SIZES: 11.1mmØ, 11.5mmØ, 11.9mmØ and15.8mmØ. Includes Test Report and Certificate of Conformance. | 4 | |
| 99D54403002000 | Ultrasonic Inspection Reference standard A318-319-320-321 | 4 | |
| 99D54403003000 | Ultrasonic Inspection Reference standard A318-319-320-321 | 4 | |
| 99D54403004000 | NDT REF STANDARD TOOL | 6 | |
| 99D54403005000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 54-51-15 Page 406 Figure 405. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D54403007000 | NDT REFERENCE STANDARD | 3 | |
| 99D55109001000 | CALIBRATION STANDARD SET | 7 | |
| 99D55109001000/1MM | AIRBUS A318/A319/A320/A321 CARBON STANDARD PT 4 51-10-06 PAGE 7. MULTIDIRECTIONAL TAPE MATERIAL BLOCK NOMINAL THICKNESS (1mm). Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57004000000 | Calibration standard set. A340-500/-600, 51-63-03-PB1; Pages 2-3, Figure 51-63-03-991-001-A SHEET 01 AND SHEET 02, Includes 99D57004000040 and 99D57004000042. | 4 | |
| 99D57004000042 | STANDARD CALIBRATION | 1 | |
| 99D57004001000 | Airbus Standard A318/A319/A320/A321 51-63-03 PG 4-5, Consists of 99D57004001001 and 99D57004001002 | 4 | |
| 99D57004001001 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 51-63-03-PB1 Page 4 Figure 51-63-03-991-002-A Sheet 1 Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57004001002 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 51-63-03-PB1 Page 5 Figure 51-63-03-991-002-A Sheet 1 Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57103002000 | Ultrasonic Inspection Reference Standard A300 | 3 | |
| 99D57103002001 | Ultrasonic Inspection Reference standard A318-319-320-321 | 5 | |
| 99D57103003000 | STANDARD CALIBRATION | 1 | |
| 99D57103004000 | Ultrasonic Inspection Reference Standard Ultrasonic Inspection A318-319-320-321 | 4 | |
| 99D57103005001 | Ultrasonic Inspection Reference standard A318-319-320-321 | 5 | |
| 99D57103006000 | AIRBUS REFERENCE STANDARD PT 4 57-11-83. Includes Test Report and Certificate of Conformance. | 5 | |
| 99D57103007000 | AIRBUS REFERENCE STANDARD , A318/A319/A320/A321 Part 4 57-11-81 Page 417 Figure 408. Material: 7175T73. Includes Test Report and Certificate of Conformance. | 3 | |
| 99D57103008000 | Ultrasonic Inspection Reference Standard A318-319-320-321 | 6 | |
| 99D57103009000 | Ultrasonic Inspection Reference Standard A318-319-320-321 | 4 | |
| 99D57103010000 | Ultrasonic Inspection Reference Standard A318-319-320-321 | 5 | |
| 99D57103011000 | Ultrasonic Reference standard A318-319-320-321 | 5 | |
| 99D57103012000 | STANDARD CALIBRATION | 6 | |
| 99D57103013000 | Ultrasonic Reference standard A318-319-320-321 | 6 | |
| 99D57103014000 | Ultrasonic Reference standard A318-319-320-321 | 5 | |
| 99D57103015000 | AIRBUS REFERENCE STANDARD A318-A321 PT 4 57-11-47 FIG 412. Includes Test Report and Certificate of Conformance. | 4 | |
| 99D57103016000 | AIRBUS REFERENCE STANDARD A318-A321 PT 4 57-11-47 FIG 417. Includes Test Report and Certificate of Conformance. | 7 | |
| 99D57103017000 | Ultrasonic Reference standard A318-319-320-321 | 5 | |
| 99D57103018000 | Ultrasonic Reference standard A318-319-320-321 | 4 | |
| 99D57103019000 | Ultrasonic Reference standard A318-319-320-321 | 4 | |
| 99D57103020000 | Airbus Reference Standard w/certs | 3 | |
| 99D57103021000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-11-47 Page 421 Figure 411 Material 7075-T7. Includes Test Report and Certificate of Conformance. | 5 | |
| 99D57103023000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-12-04-PB4 Page 47 Figure 57-12-04-991-013-A Sheet 1. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57103024000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-12-04-PB4 Page 11 Figure 57-12-04-991-003-A Sheet 1. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57103027000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-12-03-PB4 Page 73 Figure 57-12-03-991-015-A Sheet1 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57103028000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-12-03-PB4 Page 99 Figure 57-12-03-991-020-A Sheet 1 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57103032000 | AIRBUS A318/A319/A320/A321 REFERENCE STANDARD PART4 57-11-82-991-003-A SHEET 01 PG.6. Includes Test Report and certificate of Conformance. | 2 | |
| 99D57103033000 | REFERENCE STANDARD PART4 | 2 | |
| 99D57103034000 | REFERENCE STANDARD AIRBUS | 2 | |
| 99D57103035000 | AIRBUS A318/A319/A320/A321 REFERENCE STANDARD PART4 57-11-81-991-003-A PAGE 1. Includes Test Report and certificate of Conformance. | 2 | |
| 99D57103036000 | AIRBUS A318/A319/A320/A321 REFERENCE STANDARD PART4 57-11-47-991-003-A . Material: 7075 Aluminum Includes Test Report and certificate of Conformance. | 2 | |
| 99D57204105000 | STANDARD CALIBRATION | 5 | |
| 99D57204107000 | Ultrasonic Inspection Reference Standard A318-319-320-321 | 6 | |
| 99D57204125000 | Reference Standard 99D57204125000 | 5 | |
| 99D5720416400 | Reference Standard 99D5720416400 | 1 | |
| 99D57204164000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-29-07-PB4 Page 17 Figure 57-29-07-991-003-A Sheet 1. Material: 7150-T651 or Equivalent. Includes Test Report and Certificate of Conformance. | 4 | |
| 99D57204164001 | AIRBUS REFERENCE STANDARD A318-A321 57-29-07-PB4 PAGE 23 FIGURE 57-29-07-991-003-A SHEET 01. Includes Test Report and Certificate of Conformance. | 4 | |
| 99D57204166000 | Airbus Standard 57-29-10 PG25 sheet 1 | 1 | |
| 99D57204167000 | Airbus Standard 57-29-10 Sheet 1 PG10 | 2 | |
| 99D57204169000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 57-29-11-PB6 PG.9. MATERIAL: ABM3-1031(7150-T6 AL), ABM3-1029(7050-T7 AL). Includest Certification and COC. | 3 | |
| 99D57204169001 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 57-29-11-PB6 PG.9. MATERIAL: ABM3-1031(7150-T6 AL), ABM3-1029(7050-T7 AL). Includest Certification and COC. | 2 | |
| 99D57204170000 | AIB standard 57-29-11-250-801-A-01 | 3 | |
| 99D57204170001 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 57-29-11-PB6 PG.11. Includes Test Report and Certificate of Conformance | 1 | |
| 99D57204171000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-29-09-PB4 Page 12 Figure 57-29-09-991-003-A Sheet 1. Material: 2014-T652. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57204175000 | Airbus Standard A320 Figure 57-29-13-991-003-A SHEET 01 PG 43 | 4 | |
| 99D57204175000/S | AIRBUS REFERENCE STANDARD A318-A321, 57-29-13-003-A, 4340 | 1 | |
| 99D57204186000 | AIRBUS REFERENCE STANDARD Part 4 57-20-54 Figure 57-20-54-991-018-A. Material:2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57204188000 | AIRBUS A320 CALIBRATION STANDARD FIGURE 2 PROCEDURE D. A320 FWD SPAR LOWER FLANGE RIB 22-27. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57204196000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 57-29-11-PB6 PG.11. MATERIAL: ABM3-1031(7150-T6 AL), ABM3-1029(7050-T7 AL). Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57204197000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 57-29-11-PB6 PG.11. MATERIAL: ABM3-1031(7150-T6 AL), ABM3-1029(7050-T7 AL). Includes Test Report and Certificate of Conformance. Note: Repair Plate = .236" | 2 | |
| 99D57204403001 | STANDARD ETALON | 1 | |
| 99D57504100000 | AIRBUS REFERENCE STANDARD INBOARD LUG A318/A319/A320/A321 PART 4: 57-52-50 FIGURE 403 PAGE 404 Material: 2024-T351. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57504102000 | AIRBUS REFERENCE STANDARD OUTBOARD LUG A318/A319/A320/A321 PART 4: 57-52-50 FIGURE 403 PAGE 404 Material: 2024-T351. Includes Test Report and Certificate of Conformance. | 4 | |
| 99D57504103001 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-51-01 Page 405 Figure 403. Material 2024. Includes Test Report and Certificate of Conformance. | 3 | |
| 99D57504107000 | AIRBUS A318/A319/A320/A321 REFERENCE STANDARD INBOARD LUG 2024-T351 ALUMINUM. PART 4: 57-53-50 FIGURE 403 PAGE 404. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57504108000 | AIRBUS A318/A319/A320/A321 REFERENCE STANDARD OUTBOARD LUG 2024-T351 ALUMINUM. PART 4: 57-53-50 FIGURE 404 PAGE 405. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57504109000 | Ultrasonic Inspection Reference Standard A318-319-320-321 | 3 | |
| 99D57704100000 | AIRBUS REFERENCE STANDARD A318/319/320/321 57-70-06, PG. 404, FIGURE 402. Includes Test Report and Certificate of Conformance. | 3 | |
| 99DTA1511 | STANDARD BLOCK | 1 | |
| 99F-533-03044-000 | Reference Standard NDT | 1 | |
| 99F53103000000 | STANDARD REFERENCE | 3 | |
| 99F53103003000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-11-65-PB4 Page 9 Figure 53-11-65-991-00-A Sheet 1. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53103004000 | AIRBUS REFERENCE STANDARD A330-200F PT 4 53-11-08-991-004-A PAGE 1. Material 2024 Aluminum. lncludes Test Report and Certificate of Conformance. | 2 | |
| 99F53103005000 | AIRBUS REFERENCE STANDARD A330-200F PT 4 53-11-09-991-003-A PAGE 1. Material 2024 Aluminum. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53103006000 | AIRBUS REFERENCE STANDARD A330-200F PT 4 53-11-48-991-004-A PAGE 1. Material 2024 Aluminum. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53103007000 | Airbus Standard A330 53-11-82 FG 53-11-82-991-003-A | 1 | |
| 99F53103009000 | AIRBUS REFERENCE STANDARD A330 PT 4 53-11-08-009-A. MATERIAL: 2024 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53103010000 | AIRBUS REFERENCE STANDARD A330 53-11-79-991-003-A PB4. MATERIAL: 2024-T3 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53107330000 | Airbus A318/A319/A320/A321 Conductivity Standard Block Set SB A320 57-1190 Figure 3. Material: 2024-T3 and 2024-T0 Aluminum. .047", 063" and .080" thickness in each Aluminum Temper Painted with Primer. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53113000000 | AIRBUS A330/200-300 REFERENCE STANDARD PART 4 53-11-96 FIGURE 403 SHEET 1, 2024-T3 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53113002000 | AIRBUS CALIBRATION STANDARD A330-200/300 53-11-55 PAGE 28 FIGURE 53-11-55-013-A. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53113005000 | AIRBUS CALIBRATION STANDARD A330-200/300 53-11-55 PAGE 15 FIGURE 53-11-55-007-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53207310000 | Airbus Standard A330 PT6 53-21-51 | 4 | |
| 99F53207313000 | AIRBUS REFERENCE STANDARD A330 53-21-36 FIG 619. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F53207314000 | AIRBUS CALIBRATION STANDARD A330 PART 6 53-21-36 PAGE 637 FIGURE 620. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53207316000 | Airbus Standard A330 53-21-36-PB6 PG 16 FIGURE 53-21-36-991-004-A SHEET 01..Calibration Block PN 99F53207316000 | 1 | |
| 99F53207317000 | Airbus Standard A330 53-21-36-PB6 PG 18 FIGURE 53-21-36-991-005-A SHEET 01..Calibration Block PN 99F53207317000 | 1 | |
| 99F53207318000 | Airbus Standard A330 53-21-36-PB6 PG 20 FIGURE 53-21-36-991-006-A SHEET 01..Calibration Block PN 99F53207318000 | 1 | |
| 99F53303000001 | AIRBUS CALIBRATION STANDARD A340-200/-300 FIGURE 53-31-39-991-003-A. MAERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303002000 | Airbus Standard A330 PT4 53-31-62 | 1 | |
| 99F53303005000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-31-09 Page 607/608 Figure 603. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303007000 | STANDARD REFERENCE | 1 | |
| 99F53303008000 | AIRBUS REFERENCE STANDARD A330 PT 4 53-31-07 FIGURE 403 PAGE 407/408, MATERIAL 7075 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53303008001 | AIRBUS REFERENCE STANDARD A330 Part 4 53-31-07 Figure 53-31-07-991-005-A Material: 7075 or Equivalent. lncludes Test Report and Certificate of Conformance. | 2 | |
| 99F53303009000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-30-10-PB6 Page 12 Figure 53-30-10-991-004-A Sheet 1. Material: 2024-T3. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53303010000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-31-14 Page 405 Figure 403. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303011000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-31-56 Page 405 Figure 403. Material: 7175-T7351. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303012000 | AIRBUS REFERENCE STANDARD A330 Figure 53-31-61-991-010-A. Material: 7175-T7351. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303013000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-31-61 Page 404 Figure 403. Material: 7475-T7351. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303015000 | AIRBUS REFERENCE STANDARD A340-200/-300 53-31-13-PB4. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303017000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-11-84-PB6 Page 7 Figure 53-11-84-991-003-A Sheet 1, Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F53303018000 | STANDARD REFERENCE | 3 | |
| 99F53303019000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-11-30 Page 404 Figure 403. Material: 7175-T7351. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F53303020000 | Ultrasonic Inspection Reference standard A300 | 3 | |
| 99F53303021000 | Airbus Standard A330 PT4 53-11-44:PG FIG408 | 3 | |
| 99F53303023000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-30-16 Page 607/608 Figure 603. Material: 2024-T3 Bare and Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303026000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-30-18-PB6 Page 10 Figure 53-30-18-991-003-A Sheet1. Material: 2024-T3 Bare and Clad. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53303027000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-30-18-PB6 Page 11 Figure 53-30-18-991-004-A Sheet 1. Material: 2024-T3 Bare and Clad. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53303029000 | AIRBUS REFERENCE STANDARD A330 53-31-45-991-003-A, Material: 2024 or Equivalent, Fasteners: ASNA-2391-3 + ASNA-2025-3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303030000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-30-19 Page 605/606 Figure 603. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303073000 | AIRBUS CALIBRATION STANDARD A340-500/-600 FIGURE 53-39-22-991-038-A SHEET 1. MAERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303080000 | Airbus Standard A340-500/600 PT4 pg 407-408 fg 403 | 1 | |
| 99F53303084000 | Airbus Standard A340 53-38-19 | 1 | |
| 99F53303085000 | Airbus Standard A330 53-31-62 | 1 | |
| 99F53303086000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-31-87-PB4 Page 14 Figure 53-31-87-991-004-A Sheet1. Material: 2024 or Equivalent. lncludes Test Report and Certificate of Conformance. | 5 | |
| 99F53303087000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-31-87 Page 422 Figure 408, Material: 2024-T3. lncludes Test Report and Certificate of Conformance. | 4 | |
| 99F53303088000 | Airbus Standard A330 53-31-11-PB4 PG31 | 1 | |
| 99F53303090000 | Airbus Standard A340-200/-300 53-31-12-PB4 PG6 | 1 | |
| 99F53303091000 | Airbus standard A330/A340 53-31-12 Part 4 sheet 1 figure 401 | 1 | |
| 99F53303092000 | AIRBUS REFERENCE STANDARD Figure 53-31-96-991-003-A. Material: 2024-R3 or Equivalent. Includes Test Report and Certificate of Conformance | 1 | |
| 99F53303094000 | Airbus Standard A330 53-30-22PB4 PG10 | 2 | |
| 99F53303095000 | Airbus standard A340-200/300 53-30-24-PB4 PG8 | 2 | |
| 99F53303096000 | Airbus Standard A340-200/-300 53-30-29 -PB4 PG10 | 1 | |
| 99F53303097000 | Airbus Standard A340 Part 4 figure 403 sheet 1 57-11-70 page 408 | 2 | |
| 99F53303098000 | AIRBUS A340 REFERENCE STANDARD FIGURE 53-30-66-991-006-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303099000 | AIRBUS STANDARD A340 53-31-51 | 3 | |
| 99F53303100000 | Airbus Standard 53-30-51 | 1 | |
| 99F53303101000 | Airbus Standard 53-30-52 Sheet 1 PG 8 | 2 | |
| 99F53303103000 | AIRBUS STANDARD A340 53-31-89 | 1 | |
| 99F53303104000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-30-65 Figure 53-30-65-991-008-A. Material: 2024. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303107000 | AIRBUS REFERENCE STANDARD A340-500/-600 53-39-08-22-23. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303109000 | AIRBUS REFERENCE STANDARD A340-500/-600 53-39-19-270-801-A-01. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303115000 | AIRBUS REFERENCE STANDARD A330 | 3 | |
| 99F53303118000 | AIRBUS REFERENCE STANDARD A330-A340/200-300 Part 4 53-30-23 Page 407 Figure 403 Sheet 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303119000 | AIRBUS A330 REFERENCE STANDARD PART 4 53-30-70-991-008-A PAGE 7. MATERIAL: 7050 or EQUIVALENT. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303119001 | AIRBUS A330 REFERENCE STANDARD PART 4 53-30-70 PAGE 9. MATERIAL: 7050 or EQUIVALENT. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303120000 | AIRBUS A330-300/A340-200 CALIBRATION STANDARD 53-30-28 FIGURE 53-30-28-005-A. MATERIAL: 7075-T7351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303121000 | AIRBUS A330 REFERENCE STANDARD PART 4 53-30-71-991-004-A SHEET 1, 7175-T7351 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53303125000 | ARIBUS REFERENCE STANDARD A330 Part 6 53-30-72 Figure 53-30-72-991-012-A. Material: 2024-T3 and 7075-T7. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303127000 | AIRBUS REFERENCE STANDARD Part 4 53-30-09 Figure 53-30-09-991-015-A. Material: 2024-T4. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53307305001 | AIRBUS REFERENCE STANDARD A330 51-31-80 PB6 PAGE 12. A340 53-31-81 PB6 PAGES 609-610. Includes Certification Report traceable to NIST and Certificate of Conformance. | 5 | |
| 99F53507256000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-51-09-PB4 Page 12 Figure 53-51-09-991-004-A Sheet 1. Material: 7075-T7. lncludes Test Report and Certificate of Conformance. | 2 | |
| 99F54403000001 | AIRBUS REFERENCE STANDARD A330 Part 4 54-51-38 Page 404 Figure 403. Material: 40CDV12. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F54403001001 | AIRBUS REFERENCE STANDARD A330 Part 4 54-51-39 Page 404 Figure 403 Material: 40CDV12. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F54403002001 | AIRBUS REFERENCE STANDARD A330 Part 4 54-51-40 Page 405/406 Figure 403 Material: E-40CDV12. Includes Test Report and Certificate of Conformance. | 5 | |
| 99F54403002002 | AIRBUS REFERENCE STANDARD A330 54-51-40-991-008-A Page 15. Material 15-5PH. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F54503000000 | Airbus Standard A340 54-51-04-991-011-A SHEET 01 Page 10 *NOT SURE OF THE EXACT MATERIAL* | 2 | |
| 99F54503009000 | AIRBUS REFERENCE STANDARD A330 54-51-40-PB4 PAGE 46 FIGURE 54-51-40-991-014-A SHEET 01. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F54503010000 | AIRBUS REFERENCE STANDARD A330 FIGURE 54-51-40-991-019-A .FASTENER (NAS5415-36). Includes Test Report and Certificate of Conformance. | 2 | |
| 99F54503011000 | AIRBUS REFERENCE STANDARD A330 54-51-40-PB4. MATERIAL 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F54503012000 | AIRBUS REFERENCE STANDARD A330 Part 6 54-51-04-PB6 Page 28 Figure 54-51-04-991-061-A Sheet 1. Material: 40CDV12. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F54503015000 | AIRBUS REFERENCE STANDARD A330 54-54-19-991-003-A. MATERIAL: TA6V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F55109001000 | AIRBUS REFERENCE STANDARD A330 PT 4 55-10-09. Includes Test Report and Certificate of Conformance | 2 | |
| 99F55109002000 | AIRBUS REFERNECE STANDARD A330 PT 4 55-10-09. Includes Test Report and Certificate of Conformance | 2 | |
| 99F57004100001 | REF STANDARD POST SBA330-57-3087 | 4 | |
| 99F57004101001 | AIRBUS REFERENCE STANDARD A330 57-00-11 FIG 403. Includes Test Report and Certificate of Conformance. | 4 | |
| 99F57103006000 | Airbus Standard A330 PT4 57-11-48 | 1 | |
| 99F57103007000 | AIRBUS REFERENCE STANDARD A330 PT 4 57-11-44. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F57103008000 | Airbus Standard A330/340 PT4 57-11-16/57 | 2 | |
| 99F57103009000 | Airbus Standard A340 57-11-38PB4 | 1 | |
| 99F57103010000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-11-52 Page 415 Figure 408. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57103011000 | AIRBUS REFERENCE STANDARD 330 57-11-00-200-822A A340-200/-300 57-11-52-PB4. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57103012001 | Airbus Standard A330 PT4 57-11-22 | 1 | |
| 99F57103016001 | AIRBUS REFERENCE STANDARD A330 Part 4 57-11-46 Page 411/412 Figure 403. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57103017000 | Airbus Standard A330 PT4 57-11-59 | 3 | |
| 99F57103018000 | Airbus Standard A330 PT4 57-11-45 | 2 | |
| 99F57103019000 | Airbus Standard A330 PT4 57-11-25 | 4 | |
| 99F57103026000 | AIRBUS REFERENCE STANDARD A340-200/-300 57-11-62-PB4. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57103028000 | Airbus Standard 57-11-63-991-007-E SHEET 01 Page 20 | 2 | |
| 99F57103029000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-11-57 Page 407/408 Figure 403. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57103030000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-11-58 Page 407/408 Figure 403. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57103031000 | AIRBUS REFERENCE STANDARD Figure 57-11-10-991-033-A. Includes Test Report and Certificate of Conformance | 2 | |
| 99F57103032000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-11-22 Page7 Figure 57-11-22-991-003-A. Material: Aluminum Alloy. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F57103033000 | Reference standard A330/340 | 1 | |
| 99F57103035000 | Reference Standard A330/340 | 2 | |
| 99F57103036000 | Airbus Standard A340-500/-600 57-18-08-PB4 PG 5 FG 57-15-08-991-003-A | 1 | |
| 99F57103040000 | Airbus Standard Figure 57-18-11-991-003-A Sheet 1 page 5 | 1 | |
| 99F57103041000 | Airbus Standard Figure 57-18-11-991-008-A Sheet 1 page 13 | 2 | |
| 99F57103042000 | Airbus Standard Figure 57-18-11-PB4 | 1 | |
| 99F57103042001 | Airbus Standard A340 57-18-13-991-010 | 2 | |
| 99F57103043000 | Airbus Standard Figure 57-18-11-PB4 page 20.. | 1 | |
| 99F57103044000 | Airbus Standard A340-500/-600 57-18-11-pb6 Pg 11 Fg 57-18-11-991-026-A Sheet 01 | 1 | |
| 99F57103045000 | Airbus Standard Figure 57-18-11-PB6 Page 20.. | 1 | |
| 99F57103046000 | AIRBUS REFERENCE STANDARD A340 57-18-11-991-036-A FASTENER (EN6115V6-11 + NSA5050-6). Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57103048000 | Airbus Standard 57-11-63-991-016-E SHEET 01 Page 46 | 2 | |
| 99F5710305200 | Airbus Standard A330 57-11-71 section 403 page 406 | 1 | |
| 99F57103052000 | Airbus Standard A340-200/300 57-11-71-991-005-A | 1 | |
| 99F57103053000 | Airbus Standard A330 NTM 57-11-66 | 1 | |
| 99F57103054000 | Airbus Standard A330 NTM 57-20-96 FG 57-20-96-991-003-A | 2 | |
| 99F57103056000 | AIRBUS REFERENCE STANDARD A340-500/600 57-18-25-991-004-A . Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57103057000 | AIRBUS REFERENCE STANDARD A330 PT 4 57-11-79-991-003-A. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57103059000 | AIRBUS REFERENCE STANDARD 57-11-68-991-007-A. MATERIAL: 7175 or 7075 ALUMINUM WITH PROTECTIVE FINISH 13-002 and PAINT PRIMER 16-006. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57203000000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-20-84 Page 409 Figure 403. Material: 7175-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57203001000 | AIRBUS A340 REFERENCE STANDARD FIGURE 57-20-84-991-008-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57203002000 | AIRBUS REFERENCE STANDARD A330 PT 4 57-20-86-991-003-A. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57204102000 | AIRBUS REFERENCE STANDARD A340-200/-300 57-20-16-PB4. Includes Test Report and Certificate of Conformance. | 7 | |
| 99F57204105000 | AIRBUS REFERENCE STANDARD Part 4 57-20-49 Figure 57-20-49-991-006-A. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F57204106000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-20-52 Page 424 Figure 413 Material: 2024. lncludes Test Report and Certificate of Conformance. | 4 | |
| 99F57204108000 | Airbus Standard w/ Certs, A330 57-26-10: FIG403 PG404 - CAA | 3 | |
| 99F57204109001 | Airbus Standard w/ Certs, A330 57-26-10: FIG404 PG405 - CAA | 2 | |
| 99F57204110000 | Airbus Standard w/ Certs A340-200/-300 57-26-11-PB4 PG 10 FG 57-26-11-991-004-A SHEET 01 | 1 | |
| 99F57204111000 | Airbus Standard w/ Certs A340-200/-300 57-26-11-PB4 PG 9 FG 57-26-11-991-003-A SHEET 01 | 1 | |
| 99F57204114000 | Airbus Standard w/ Certs, A340 57-26-10-PB4:PG9 FIG57-26-10-991-013-A - CAA | 1 | |
| 99F57204115000 | Airbus Standard w/ Certs, A340 57-26-10-PB4:PG10 FIG57-26-10-991-014-A - CAA | 1 | |
| 99F57204120000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-26-12 Page 404 Figure 403. Material: 2024-T351. Includes Test Report and Certificate of Conformance. | 4 | |
| 99F57204124000 | AIRBUS REFERENCE STANDARD A340 PT 4 57-26-08. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57204124001 | Airbus Standard w/ Certs, A340 57-26-08-PB4:PG12 FIG57-26-08-991-012-A - CAA | 1 | |
| 99F57204128000 | AIRBUS REFERENCE STANDARD A340 PT 4 57-26-09. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57204128001 | AIRBUS REFERENCE STANDARD A340-200/-300 57-26-09-PB4. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57204130000 | AIRBUS REFERENCE STANDARD A330 57-20-47 FIG 405. Includes Certification Report and Certificate of Conformance. | 4 | |
| 99F57204134000 | AIRBUS REFERENCE STANDARD A340 PT 4 57-26-08. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57204135000 | AIRBUS REFERENCE STANDARD A330 57-20-52 FIG 403 SHEET 1 PAGE 407. Includes Test Report and Certificate of Conformance. | 4 | |
| 99F57204136000 | AIRBUS REFERENCE STANDARD A330 57-20-52 FIG 403 SHEET 1 PAGE 407. Includes Test Report and Certificate of Conformance. | 4 | |
| 99F57204137000 | AIRBUS REFERENCE STANDARD A330 57-20-52 FIG 403. Includes Test Report and Certificate of Conformance. | 4 | |
| 99F57204138001 | AIRBUS REFERENCE STANDARD A330 57-20-52 FIG 403. Includes Test Report and Certificate of Conformance. | 4 | |
| 99F57204140000 | AIRBUS REFERENCE STANDARD A330 Part 6 57-20-02 Page 604 Figure 603. Material: 2024-T351. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57204144000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-20-93 page 405 Figure 403. Material: 2024-T351. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F57204145000 | Airbus Standard A330 PT4 57-20-15 | 4 | |
| 99F57204146000 | AIRBUS REFERENCE STANDARD A330 57-20-49 FIG 403 SHEET 1 PAGE 406. Includes Test Report and Certificate of Conformance. | 4 | |
| 99F57204171000 | Airbus Standard A340 57-26-59 | 1 | |
| 99F57204173000 | AIRBUS A330 REFERENCE STANDARD 57-20-46-270-801-A-01 PAGE 12. OUTER WING REAR SPAR UPPER & LOWER FLANGES BETWEEN RIB7 and RIB12 LH/RH. MATERIAL: 7010 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F57204174000 | AIRBUS REFERENCE STANDARD A330 57-20-46-991-005-A PAGE 13. US INSPECTION OF OUTER WING REAR SPAR FWD FACE BETWEEN RIB 7 AND RIB 12 INCLUDING TOP AND BOTTOM FLANGES Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57204175000 | AIRBUS REFERENCE STANDARD A330 57-20-46-991-005-A PAGE 13. US INSPECTION OF OUTER WING REAR SPAR FWD FACE BETWEEN RIB 7 AND RIB 12 INCLUDING TOP AND BOTTOM FLANGES Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57204176000 | AIRBUS REFERENCE STANDARD A330 57-20-46-991-005-A PAGE 13. US INSPECTION OF OUTER WING REAR SPAR FWD FACE BETWEEN RIB 7 AND RIB 12 INCLUDING TOP AND BOTTOM FLANGES Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57204177000 | AIRBUS REFERENCE STANDARD A330 57-20-46-991-005-A PAGE 13. US INSPECTION OF OUTER WING REAR SPAR FWD FACE BETWEEN RIB 7 AND RIB 12 INCLUDING TOP AND BOTTOM FLANGES Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57244001000 | AIRBUS A330 REFERENCE STANDARD PART 4 57-24-04-991-010-A SHEET 1, 2024-T351 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F57500001000 | AIRBUS CALIBRATION STANDARD A340-200/-300, FIGURE 57-29-02-991-003-A. MATERIAL: 7050-T7651 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57603001000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-61-16 page 404 Figure 403. Material: 7175-T7351. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57603002000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-61-06 Page 404 Figure 403. Material: Aluminum Alloy. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57603004000 | Airbus Standard A330 57-61-14 PB4 sheet 1 page 6 | 2 | |
| 99F57603005000 | Airbus Standard A330 57-61-14 Sheet 1 PG17 | 1 | |
| 99F57603006000 | AIRBUS REFERENCE STANDARD A330-200F PT 4 57-61-21-991-003-A PAGE 1. Material 2024 Aluminum. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99GP-06-OLAD | OFFSET NOSE ASSY HUCK POWER RIVETERS (STANDARD EXTENDED) | 1 | |
| 99L52103000000 | Airbus Standard A380 Figure 52-81-01-991-012-A | 1 | |
| 99L52107325000 | Airbus Standard A380 52-18-02 PG 15 | 1 | |
| 99L53103000000 | Airbus Standard A380 53-11-03 | 1 | |
| 99L53103001000 | Airbus Standard A380 53-11-12 | 1 | |
| 99L53103002000 | A380-800 REFERENCE STANDARD 2024 ALUMINUM; FIGURE:53-11-03-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103004000 | Airbus Standard A380 53-11-09 | 1 | |
| 99L53103005000 | Airbus Standard A380 53-11-23 | 1 | |
| 99L53103006000 | Airbus Standard A380 53-11-07 | 1 | |
| 99L53103008000 | Airbus Standard A380 53-11-11 | 1 | |
| 99L53103010000 | Airbus Standard A380 53-31-24 | 1 | |
| 99L53103012000 | Airbus Standard A380 53-31-22 | 1 | |
| 99L53103013000 | A380 REFERENCE STANDARD 7010 OR EQUIVALENT ALUMINUM; FIG.53-11-20-991-003-A SHEET 1. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103020000 | AIRBUS A380 REFERENCE STANDARD FIGURE 7 53-11-10-010-A PG. 25. Material: 7075-T751 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103021000 | AIRBUS A380 REFERENCE STANDARD FIGURE 6 53-11-02-009-A PG. 17-18. Material: 7075-T7 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53113002000 | AIRBUS A380 REFERENCE STANDARD FIGURE 6 53-11-10-009-A PG. 24. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303000000 | Airbus Standard A380 53-31-37 | 1 | |
| 99L53303001000 | Airbus Standard A380 53-31-36-991-003-A | 1 | |
| 99L53303002000 | Airbus Standard 53-31-22 | 1 | |
| 99L53303003000 | Airbus standard 53-31-22 | 1 | |
| 99L53303004000 | Airbus Standard 53-31-22 | 1 | |
| 99L53303005000 | Airbus Standard A380 53-31-21-991-003-A | 1 | |
| 99L53303006000 | Airbus Standard A380 53-31-29 | 1 | |
| 99L53303007000 | Airbus Standard A380 53-31-29 | 1 | |
| 99L53303008000 | Airbus Standard A380 53-31-19-991-003-A | 1 | |
| 99L53303009000 | Airbus Standard A380 53-31-20 | 1 | |
| 99L53303010000 | Airbus Standard A380 53-31-08 | 1 | |
| 99L53303015000 | Airbus Standard A380 53-31-10 | 1 | |
| 99L533030150000 | Airbus Standard 53-31-10 | 1 | |
| 99L53303016000 | Airbus Standard A380 53-31-30 | 1 | |
| 99L53303017000 | Airbus Standard A380 53-31-30 | 1 | |
| 99L53303018000 | Airbus Standard A380 53-31-16 | 1 | |
| 99L53303019000 | Airbus Standard A380 53-31-11-991-003-A | 1 | |
| 99L5330302200 | Airbus Standard 53-31-12 | 1 | |
| 99L53303022000 | Airbus Standard 53-31-12 | 1 | |
| 99L53303024000 | Airbus Standard 53-31-22 | 1 | |
| 99L53303027000 | AIRBUS REFERENCE STANDARD A380-800 53-31-37-991-013A. MATERIAL: 7475 OR EQUIVALENT 7050 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303030000 | AIRBUS REFERENCE STANDARD A380-800 53-31-62-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303031000 | AIRBUS REFERENCE STANDARD A380-800 53-31-60-991-015-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303032000 | A380-800 REFERENCE STANDARD 7075 ALUMINUM; FIGURE:53-31-53-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303033000 | AIRBUS REFERENCE STANDARD A380-800 53-31-63-991-003-A. MATERIAL: 7175-T73 OR EQUIVALENT. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303035000 | AIRBUS REFERENCE STANDARD A380 53-31-27-991-021-A PAGE 23. MATERIAL: 7175 OR 7075 ALUMINUM. Includes Certificate of Conformance. | 1 | |
| 99L53303037000 | AIRBUS REFERENCE STANDARD A380 53-31-27-991-020-A PAGE 22. MATERIAL: TEFLON. Includes Certificate of Conformance. | 1 | |
| 99L53303100000 | Airbus Standard A380 53-30-51 | 1 | |
| 99L53509001000 | Airbus Standard 53-51-02 | 1 | |
| 99L53509002000 | Airbus Standard A380 | 1 | |
| 99L53509003000 | Airbus Standard A380 53-51-08 FG 53-51-08-991-004-A | 1 | |
| 99L53509006000 | Airbus Standard A380-800 53-51-37 FG 53-51-37-991-007-A | 1 | |
| 99L53509008000 | AIRBUS A380-800 REFERENCE STANDARD TITANIUM 6AL 4V; FIGURE:53-51-58-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L54503000000 | Airbus Standard A380 54-51-04 | 1 | |
| 99L54503003000 | Airbus Standard A380 54-51-05 | 1 | |
| 99L54503004000 | Airbus Standard A380 54-51-05 | 1 | |
| 99L54503005000 | AIRBUS REFERENCE STANDARD A380-800 54-51-03-991-004-A. MATERIAL: TA6V B Includes Test Report and Certificate of Conformance. | 1 | |
| 99L54503006000 | AIRBUS REFERENCE STANDARD A380-800 54-52-02-991-022-A, MATERIAL:TA6VB Includes Test Report and Certificate of Conformance. | 1 | |
| 99L55209001000 | AIRBUS REFERENCE STANDARD 55-21-03-991-003-1. 7050-T7451 ALUMINUM | 1 | |
| 99L57103002000 | A380-800 REFERENCE STANDARD FIGURE:53-11-03-991-008-A. Material: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57200001000 | STANDARD CALIBRATION | 1 | |
| 99L57203000000 | Airbus Standard A380 57-21-10-991-003-A | 1 | |
| 99L57203001000 | Airbus Standard A380 57-21-10 | 1 | |
| 99L57203002000 | Airbus standard A380 57-21-05 | 2 | |
| 99L57203003000 | Airbus Standard A380 57-21-02-991-003-A | 1 | |
| 99L57203005000 | Airbus Standard A380 57-11-03 | 1 | |
| 99L57203006000 | Airbus Standard A380 57-11-03 | 1 | |
| 99L57203007000 | Airbus Standard A380 57-11-03 Probe Guide | 1 | |
| 99L57203008000 | Airbus Standard A380 57-11-03 Probe Guide | 1 | |
| 99L57204005000 | Airbus Standard A380 57-26-01 | 1 | |
| 99L57204068000 | AIRBUS STANDARD A380-800 FIGURE 53-21-17-991-019-A | 1 | |
| 99L57603000000 | AIRBUS REFERENCE STANDARD A330-200F 57-61-21-991-006-A PAGE 1. . lncludes Certificate of Conformance. | 1 | |
| 99N28207315000 | AIRBUS REFERENCE STANDARD A318-A321 28-28-03-PB6. Includes Test Report and Certificate of Conformance. | 4 | |
| 99N51107332000 | REFERENCE STANDARD NDT | 2 | |
| 99N51107332000-A | AIRBUS REFERENCE STANDARD A380-800 51-10-30-991-003-A FOR CLADDING MEASUREMENT. Includes Test Report and Certificate of Conformance. | 1 | |
| 99N51107332000-B | AIRBUS REFERENCE STANDARD A380-800 51-10-30-991-003-A FOR CLADDING MEASUREMENT. Includes Test Report and Certificate of Conformance. | 1 | |
| 99N51107332000-C | AIRBUS REFERENCE STANDARD A380-800 51-10-30-991-003-A FOR CLADDING MEASUREMENT. Includes Test Report and Certificate of Conformance. | 1 | |
| 99N51109009000 | CALIBRATION REFERENCE STANDARD (CRS) | 2 | |
| 99N51109009000 | CALIBRATION STANDARD | 2 | |
| 99N51109010000 | CALIBRATION REFERENCE STANDARD (CRS) | 2 | |
| 99PNF54503009000 | AIRBUS REFERENCE STANDARD A330 54-51-40-991-014-A FASTENER (NSA5415-36). lncludes Test Report and Certificate of Conformance. | 1 | |
| 99V52307336000 | AIRBUS REFERENCE STANDARD A380 52-31-01 FIGURE 5-52-31-01-005-A.MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 9RS1 | DC-9 REFERENCE STANDARD Page 1-4 Material:2024-T6 and 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| 9RS12 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 9RS17 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 9RS22 | Ultrasonic Inspection Reference standard MD-80 | 1 | |
| 9RS5 | DC-9 REFERENCE STANDARD PAGES 17-20, SHEETS 1-4. MATERIAL: 2024-T3 CLAD ALUMINUM | 2 | |
| 9RST8 | 717-200 REFERENCE STANDARD FIGURE 1.10 SHEETS (1-6 ), PAGES 1-6. MATERIAL: 2024-T3 ALUMINUM and PHENOLIC(DMS1558). Includes Test Report and Certificate of Conformance. FASTENER (NAS1203 + NAS1252-10H + NAS679-A3, S432867-8 + NAS1080-8) | 1 | |
| A-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| A-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| A-2TM | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| A10L16-00-25Q | STANDARD PHASED ARRAY PROBE (NDT) | 1 | |
| A20006-32 | STANDARD TOOL - INSTALLATION TOOL, GROMMET, NAS1368 | 15 | |
| A21010-70 | PUMP - VACUUM, PORTABLE, STANDARD DUTY | 6 | |
| A23-105 | INSULATED ENGINE COVER (standard design) | 1 | |
| A2482FG701 | 8TJ141 TRANSFER STANDARD FIXTURE | 1 | |
| A266 | BOEING REFERENCE STANDARD 727 PT 6 57-50-27 | 1 | |
| A27073-1 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 5 | |
| A27288 | Eddy Current Inspection Reference standard SB DC9-27A235 R03 | 3 | |
| A30199 | MECHANICAL PLIERS. THIS TOOL IS USED FOR ELECTRICAL STANDARD PRACTICES. | 8 | |
| A305 | BOEING REFERENCE STANDARD PART 6 57-30-03 pg. 3 Fig 1 & 57-10-18. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| A306 | BOEING REFERENCE STANDARD 737 PART 6 57-10-07 FIGURE 1 PAGE 4. | 1 | |
| A32045-101 | SPANNER WRENCH - AN STANDARD TYPE | 11 | |
| A32045-125 | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| A32091-0781 | STANDARD TOOL HOLE SAW | 1 | |
| A330-92200-0001 | STANDARD TOOL BENCH - A | 1 | |
| A330-92210-0001 | STANDARD TOOL BENCH - B | 1 | |
| A341-000 | BUBBLE COVER, STANDARD CABIN | 1 | |
| A341-100 | PARTICLE SEPARATOR/EXHAUST COVER (STANDARD MODEL) | 1 | |
| A341-800 | TRAVEL COVER, Light Weight Travel Bubble Cover, STANDARD CABIN | 1 | |
| A35002-10 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 8 | |
| A35002-7 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 4 | |
| A352 | BOEING REFERENCE STANDARD 737 PART 6 53-10-04 PAGE 4 FIGURE 1. 2024-T3 CLAD ALUMINUM OR 7075-T6 BARE. Includes Test Report and Certificate of Conformance. | 11 | |
| A376 | BOEING REFERENCE STANDARD 737 PT 6 53-10-45 | 1 | |
| A386 | BOEING REFERENCE STANDARD 737 PT 6 53-10-45 | 2 | |
| A389A | Reference Standard A389A | 3 | |
| A389B | REFERENCE STANDARD A389B | 2 | |
| A389C | Reference Standard A389C | 2 | |
| A4010 | Boeing Standard 53-10-33 PT6 PG7 | 1 | |
| A40199 | HAND BANDING TOOL - STANDARD CLAMPING BAND | 6 | |
| A40199 | BAND-IT A40199 TIE-DEX II TOOL FOR STANDARD SIZE BANDS | 6 | |
| A4024 | Boeing Standard 747 53-10-33 PT6 PG 8 | 1 | |
| A428 | Boeing Standard 747 53-10-15 PT6 PG9 | 1 | |
| A429 | Boeing Standard 747 53-10-15 PT 6 PG9 | 1 | |
| A430 | Boeing Standard 747 53-10-15 PT 6 PG9 | 2 | |
| A459 | Boeing Standard 747 30-10-13 PT6 PG3 | 1 | |
| A5069 | REFERENCE STANDARD 5 MHZ 70 DEGREE | 2 | |
| A607 | BOEING REFERENCE STANDARD 767 PT 6 53-80-02 | 4 | |
| A607A | BOEING REFERENCE STANDARD 767 PT6 53-80-02 | 3 | |
| A71015-157/Standard parts-N | Standard parts kit assy | 1 | |
| A99-14CRG | DAVID CLARK (DC) CLAA99- 14CRG 4-BAY BATTERY CHARGER FOR 9900/9100 SYSTEM BATTERIES. THE 4- BAY BATTERY CHARGER (CLAA99- 14CRG) REQUIRES A STANDARD 110V CORD WITH A THREE-PRONG PLUG FOR CHARGING | 2 | |
| AA-62584 | Action Air Parts LED51N Standard Aviation Single Magneto Synchronizer | 1 | |
| AA1-400 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers) (standard tail), WINTER USE | 1 | |
| AA1-405 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers) (standard tail), ALL YEAR USE | 1 | |
| ABS324205-2 | Flat Standard with Radius Notch, Forged Aluminum, per ABS PT3 32-42-05 PG15:PROC1 FIG11 | 1 | |
| AC-PKG-SF-00 | AC-PKG-SF-00;MAP-Series OPM Standard Single Adaptors Kit | 1 | |
| AC500-900 | COCKPIT HEATSHIELDS, standard pilot's side (no door), w/ skylights (set of 6) | 1 | |
| AC500-903 | COCKPIT HEATSHIELDS, standard side window (no door), no skylights (set of 4) | 1 | |
| ACF-50 | ACF-50 HANDHELD SPRAY SYSTEM OR ACF-50 STANDARD PUMP SPRAY SYSTEM-50000 OR 50003 | 1 | |
| ACRS3-172942 | CALIBRATED CONDUCTIVVITY REFERENCE STANDARD SET OF 3. KIT CONSISTS OF MAGNESIUM, 6061-T6 AL AND 2024-T3 AL ( IACS Nominal values of 17%, 29% and 42% respectively) | 1 | |
| AD-1 | ADAPTS LARGE BORE VALVE DOWN TO STANDARD BORE. FITS IN 305-32 VALVE CORE THREADS. | 1 | |
| AD626037 | REVERSIBLE RATCHET HANDLE 1/4" STANDARD ANTIDROP ACO | 1 | |
| ADSE743 | PITOT/STATIC TESTER , WITH STANDARD ACCESSORIES | 3 | |
| AE-OPT-0060 | Non-Standard Paint -Tug Only (Non Metallic) | 1 | |
| AE0PT0060 | NON STANDARD PAINT, TUG ONLY NON METALL, | 1 | |
| AES-.187SS/1.5WL | STAINLESS STEEL STANDARD ELOTEST ROTARY PROBE, 3/16"Ø,100KHZ-2MHZ 1.5" (38.1mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AES-6.3MSE | STANDARD ELOTEST ROTARY PROBE SPLIT END 6.3MM 100KHZ-2MHZ.. 2.0" WORKING LENGTH | 1 | |
| AES-RA | ADAPTER STANDARD ELOTEST ROTARY TO RECHII RA PROBE END | 1 | |
| AESY-.125-.156 | STANDARD ELOTEST ROTARY PROBE ..100KHZ-2MHZ 1.3" WORKING LENGTH | 1 | |
| AESY-.156-.187 | STANDARD ELOTEST ROTARY PROBE..100KHZ-2MHZ 1.3" WORKING LENGTH | 1 | |
| AF-4092 | LOW FREQUENCT RING PROBE, 500Hz-3KHz. REFLECTION, 1.00" OD, .510" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4101 | LOW FREQUENCT RING PROBE, 1-10KHz. REFLECTION, .700" OD, .350" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4102 | LOW FREQUENCT RING PROBE, 50Hz-5KHz. REFLECTION, .700" OD, .350" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4105/TF | Surface Probe, Standard Bridge Detachable Surface Probe with a diameter of .31 in. (7.9 mm) and a operating range of 1 kHz - 50 kHz (equivalent to SPO-1284, SPO-1596), Triax Fischer/ LEMO Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4109/TI | LOW FREQUENCY REFLECTION RING PROBE, ID .470, OD.900, 3-10KHZ. For reference standard NDT 3259. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4124/300H | REFLECTION RING PROBE TRIAX FISHER CONNECTOR, 1.25"OD .75" ID(19.6mm) 300HZ-1KHZ. 737 PART 6 57-10-53, pg.2, USED WITH REFERENCE STANDARD NDT3168 AND NDT3176-X. Includes test report and Certificate of Conformance. | 1 | |
| AF-4153/TI | LOW FREQUENCY RING PROBE 1-15KHz, REFLECTION, ID.565" OD.910",SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT 3225. | 1 | |
| AF-4202 | LOW FREQUENCY REFLECTION RING PROBE, 500HZ-5KHZ, ID 0.325", OD 0.790" (MAX). 1.05" HEIGHT. TRIAX FISCHER CONNECTOR. USED WITH NDT6097 REFERENCE STANDARD Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4335 | LOW FREQUENCY REFLECTION RING PROBE, 300Hz-1KHz .425"Ø ID SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance.....USED WITH 717-200 REFERENCE STANDARD P/N: 717RS10-C | 1 | |
| AF-5098RS/.875 | BOEING DC9 REFERENCE STANDARD -57-225 FIG 6 | 1 | |
| AF-5272 | CUSTOM COUNTERBORE ROTARY ADJUSTABLE X STYLE PROBE WITH THE COIL LOCATED AT THE EDGE OF THE PROBE TIP, .936'-1.0" 2.0"WL, SUPPLIED WITH A 4 PIN FICHER CONNECTOR, 100 KHz-2MHz Includes Test Report and Certificate of Conformance REFERENCE STANDARD - NDT3117 | 1 | |
| AF-5278/TF | HIGH FREQUENCY SURFACE PROBE, Twin Coil Differential 50-500KHZ. 4.0" Long 0.375" Diameter with Triax Fischer connector. For use with Boeing Reference Standard 497 767 Part 6 53-00-04. IncludesTest Report and Certificate of conformance. | 1 | |
| AF-6006 | SLIDING PROBE, REFLECTION, 1-40KHZ TRIAX FISHER CONNECTOR. REFERENCE STANDARD USED ( NDT1099) 757 PT. 6, 53-30-14. Includes Certification Report and COC. | 1 | |
| AF-NEC-6112-1/Ti | Custom multi-hole reference standard Material: 6AL-4v Titanium. Hole sizes: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8",11/16" and 3/4". Countersink holes opposite side. Thru hole EDM notches in each hole .005" +/-.001". 3 Surface... | 1 | |
| AF125-4801-DEV | Custom Boeing Reference Standard. Material: ST Aeromet 100. Quantity of 1 (A) .030" x .030" and 1 (B) .050" x .050" corner EDM notch. Reference standard must be fabricated using round bar since Aeromet 100 is only commercially available in this form.... | 1 | |
| AF8 | M22520/1-01 Standard Adjustable Indent Crimp Tool | 14 | |
| AF8-CC | Standard Adjustable Indent Crimp Tool with CYCLE COUNTER | 2 | |
| AFC-169 | BOEING REFERENCE STANDARD TRANSDUCER POSITIONER TRANSDUCER POSITIONER TRANSDUCER POSITIONER CONTACT TRANSDUCER | 1 | |
| AFC-470-1 | Airwolf AFC-470-1 Standard 3.00 to 3.75 Diameter Oil Filter Can Cutter | 2 | |
| AFHS20-2A-5 | Aluminum Multi-hole reference standard with certificate. Contains 20 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 1.0" inch. Each hole contains two EDM corner... | 1 | |
| AFK-1014 | Custom Ultrasonic Kit, PART 4 53-10-13 for the WING REAR SPAR - STA 663.75 REAR SPAR BULKHEAD SIDE FRAME FITTING FAIL SAFE STRAP. Kit includes 1 of each AFM-560AT & AFS-0541 Transducers, 1 NDT3312 Reference Standard and 1 ABNC-MD6. Supplied with a waterpr | 1 | |
| AFK-1017 | Custom Eddy Current Inspection Kit. Includes the following probes, Reference Standard and cables.AUR-.125SE/1.75WL-LF, AUR-.156SE/1.75WL-LF, AUR-.187SE/1.75WL-LF, AUR-.250SE/2.0WL-LF, AUR-.312SE/2.0WL-LF, AUR-.375SE/2.0WL-LF, AUR-.437SE/2.0WL-LF, AUR-... | 1 | |
| AFK-AUR9 | Scanner Probe kit, ""SUB"" scanner series:9 probes with standard working lengths. Probes "SUB-8-10, SUB-10-12, SUB-12-14, SUB-14-16, SUB-16-18, SUB-18-20, SUB-20-24, SUB-24-28, SUB-28-32. Includes shipping/ transport kit capable of storing scanner cable a | 1 | |
| AFK-EC-BH16 | Boeing Part 6 51-00-00 Proceedure 16 Eddy Current Bolt Hole Inspection Kit. Includes 15 Universal Rotating Split End scanner probes Supplied with a with a Universal 4 Pin Fischer Connector and 1 Calibration Standard with hole sizes ranging from .187"Ø to | 1 | |
| AFK-SS | PH TOOL REFERENCE STANDARD STAINLESS SPEC USAF TO 33-B-1-1 | 1 | |
| AFNDT-1000/4340 | 12 HOLE REFERENCE STANDARD 4340 STEEL WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1000/SA | 12 HOLE REFERENCE STANDARD ALUMINUM WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1000SA-1 | 12 HOLE REFERENCE STANDARD ALUMINUM WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1000SS | 12 HOLE REFERENCE STANDARD STAINLESS STEEL WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1000TI | 12 HOLE REFERENCE STANDARD 6AL4V WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1002 | CUSTOM 3 HOLE 7075-T6 ALUM. EC REFERENCE STANDARD WITH a .020x.020" CORNER NOTCH IN EACH HOLE. HOLE SIZES 1.063", .687", .625" DIA. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1005 | 14 HOLE ROTARY STANDARD 6AL4V 5/32, 7/32, 11/32, 3/16, 5/16, 13/64, 15/64, 17/64, 19/64, 21/64, 1/4, 3/8, 1/2, 28 EDM NOTCHES .050 TOP, .030 CORNER BOTTEM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1012 | Bombardier / Challenger 300 Custom UT Thickness Reference Standard Figure 2 Part 1 Section 4 page 11. Material: 2024-T351 Clad. Standard machine milling, no Chemical mill. Step Tolerance: +/-.002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-INC625 | CALIBRATION STANDARD INCOLNEL BLOCK 625 5X1 OAL .10,.20,.30,.40,.50. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1016-6S-TI | CUSTOM 6 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6, 51-00-02 PROCEDURE 1..... Hole Sizes: .188", .250", .313", .375" .438" .500". MATERIAL: 6AL-4V Titanium. Inc... | 1 | |
| AFNDT-1017AL | Custom Eddy Current Hole Standard 7075-T7 Aluminum ( Equivalent substitute for 7010 Aluminum). Hole Sizes 1.77" and 0.58" diameter. EDM flaw size: 0.5mm(.020") x 0.1mm (0.004") +/- .002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1025AL | Multi-Hole reference standard. Material: 7075-T6 Aluminum. 12 Holes 3/16", 7/32", 1/4" ,9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4" .020" x .020" x .005" Wide ± .002" Through EDM Notches in each hole. Standard also includes 3 surface EDM n | 1 | |
| AFNDT-1025TI | Multi-Hole reference standard. Material: 6Al-4v Titanium. 12 Holes 3/16", 7/32", 1/4" ,9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4" .020" x .020" x .005" Wide ± .002" Through EDM Notches in each hole. Standard also includes 3 surface EDM no | 1 | |
| AFNDT-1030 | CUSTOM BRILE RIVET/ 100 DEGREE COUNTERSINK MULTI HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. BRILE HOLE SIZES: 5/32", 3/16" and 1/4". 100 DEGREE COUNTERSINK HOLE SIZES: 5/32", 3/16", 1/4", 5/16", 3/8". .030"X.030" CORNER / COUNTERSINK EDM NOTCHES. DIM... | 1 | |
| AFNDT-1035/7075 | 5 hole reference standard sizes; 1/4", 5/16", 3/8", 7/16" and1/2" inch diameters.( .030" X .030" x .005" +/-.001" corner EDM notch. 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1035TI | REFERENCE STANDARD 7/16" THICK 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1074/TI | REFERENCE STANDARD TITANIUM | 1 | |
| AFNDT-1080-2/840 | CUSTOM REFERENCE STANDARD PER SPECS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1098AL | 12 HOLE REFERENCE STANDARD 2024-T3 .156, .187, .199 ,.218, .250, .281, .312, .343, .375, .406, .437, .500, .030X.030 CORNER NOTCH, .050X.050 CORNER NOTCH ( 24 EDM NOTCHES TOTAL). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1098St | 12 HOLE REFERENCE STANDARD 4340 STEEL. HOLE SIZES: .156, .187, .199 ,.218, .250, .281, .312, .343, .375, .406, .437, .500, .030X.030 CORNER NOTCH, .050X.050 CORNER NOTCH (24 EDM NOTCHES TOTAL). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1098TI | 12 HOLE REFERENCE STANDARD 6AL4V .156, .187, .199 ,.218, .250, .281, .312, .343, .375, .406, .437, .500, .030X.030 CORNER NOTCH, .050X.050 CORNER NOTCH (24 EDM NOTCHES TOTAL). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-186A-F | CUSTOM STANDARD COMBINING 186A-F INTO ONE STANDARD. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2002AL | CALIBRATION STANDARD THREE HOLES, 1.0,1.25,1.5, CORNER NOTCH .030X.030. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2003-1A-2 | 12 HOLE STANDARD - HOLE SIZES; 3/16 INCH (4.74MM) 7/32 INCH (5.53MM) 1/4 INCH (6.35MM) 9/32 INCH (7.13MM) 5/16 INCH (7.92MM) 11/32 INCH (8.71MM) 3/8 INCH (9.52MM) 7/16 INCH (11.09MM) 1/2 INCH (12.7MM) 9/16 INCH (14.27MM) 5/8 INCH (15.87MM) 3/4 INCH (19.05 | 1 | |
| AFNDT-2003-1AL | "EC REFERENCE STANDARD U8860405 | 1 | |
| AFNDT-2003-2S | 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: .187", .250" ,.312", .375", .437", .500", .562", .625", .687", .750", AND 1.0" ( .030X.030 CORNER NOTCH and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) 304 STAINLESS STEEL. Includes Test Repo | 1 | |
| AFNDT-2004 | EDDY CURRENT SURFACE STANDARD WITH 3 EDM NOTCHES: ( .005", .010", .020" Deep x .004"Wide +/- .002 ), MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2005A | 12 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .030" x .030" CORNER NOTCH. .008", .020", .040" SURFACE NOTCHES. .005" +/-.001". Includes Test Report and Certificate o | 1 | |
| AFNDT-2005TI | 12 HOLE REFERENCE STANDARD 6AL-4v TITANIUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .030" x .030" CORNER NOTCH. .008", .020", .040" SURFACE NOTCHES. .005" +/-.001". Includes Test Report and Certificate of | 1 | |
| AFNDT-2006/13-8 | 12 HOLE REFERENCE STANDARD 13-8 PH STAINLESS STEEL (3/16, 7/32 ,1/4, 9/32, 5/16,11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4), .030X.030. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2006/17-4 | 12 HOLE REFERENCE STANDARD 17-4PH (3/16, 7/32 ,1/4, 9/32, 5/16,11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4), .030X.030. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2006/300M | 12 HOLE REFERENCE STANDARD 300M STEEL.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.005"WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", .020", .040" DEEP .005" ... | 1 | |
| AFNDT-2006A | 12 HOLE REFERENCE STANDARD 7075-T6 aluminum. Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.004" ±.002" WIDE CORNER EDM NOTCH in EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", .020",... | 1 | |
| AFNDT-2006S | 12 HOLE REFERENCE STANDARD 4130 or 4340 STEEL.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.005"WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", .020", .040" DEE... | 1 | |
| AFNDT-2006SS | 12 HOLE REFERENCE STANDARD 304 304 STAINLESS STEEL.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.005"WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", .020", .040... | 1 | |
| AFNDT-2006TI | 12 HOLE REFERENCE STANDARD 6AL-4V.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.005"WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", .020", .040" DEEP .005" WIDE... | 1 | |
| AFNDT-2008/2024-T6 | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PROCEEDURE 1, FIGURE 11, PAGE 15 ALUMINUM 2024-T6 .. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2008/C | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PAGES 1-7 FIGURE 2 and 3 CAST ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2008/F | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PROCEEDURE 1, FIGURE 11, PAGE 15 ALUMINUM 2014-T6 CONDUCTIVITY RANGE 35-40 IACS.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2008/MAG | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PAGES 1-7 FIGURE 2 and 3. MATERIAL: MAGNESIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2008/SS | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PAGES 1-7 FIGURE 2 and 3 & 32-42-05 FIGURE 11 PROCEDURE 1 PAGE 15. MATERIAL: 304 STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2010AL | Custom McDonnell Douglas 15 bolt hole reference standard with a .060"L x .030Dx .005" max width mid-wall notch, and .030"x.030"x.005" max width corner notch in each hole. Hole sizes (.156", .172", .188", .203", .250", .266", .281", .297", .313", .328"... | 1 | |
| AFNDT-2013AL | 12 HOLE REFERENCE STANDARD 7075-T6 (3/16" x 2), 13/64", 7/32", 15/64" ,(1/4" x 2 ), 17/64",9/32", 19/64",5/16", 21/64" .020"x.020" and .030"x.030" x .005"W +/-.002" CORNER EDM NOTCH PER BOEING SPECIFICATION 747 PART 6 51-00-00 PAGE 8 FIGURE 3. Includes Te | 1 | |
| AFNDT-2014Ti | 12 HOLE REFERENCE STANDARD IN 6AL-4v Ti; HOLE SIZES: (3/16, 7/32 ,1/4, 9/32, 5/16,11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4), .010", .020", .030", and .040" SURFACE NOTCHES. .050"x.050" CORNER EDM NOTCH and .030"x.030" CORNEREDM NOTCH, .050"Lx.030"D MID-... | 1 | |
| AFNDT-2017-INC718 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 718 INCONEL. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certific | 1 | |
| AFNDT-2030/MAG | Surface reference standard, Magnesium, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX | 1 | |
| AFNDT-2035 | 6 Hole reference standard (Aluminum 7075-T6 with certifications). Hole Sizes: 1.0", 1.125", 1.250" ,1.500", 1.625", 1.750", ( .030 x .030 x .006 +/- .001) Corner EDM Notches and .010, .020, .040 Surface notches).. Includes Test Report and Certificate | 1 | |
| AFNDT-2042/AL | CUSTOM 5 HOLE REFERENCE STANDARD MADE OF 7075-T6 ALUMINUM WITH (0.5mm X 0.5mm +/- .05mm) CORNER EDM FLAWS. HOLE SIZE : 13/64", 19/64", 23/64", 7/16" & 31/64". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2046/AL | 15 HOLE REFERENCE STANDARD 7075-T6 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 15 EDM NOTCHES .030X.030 CORNER TOP. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2046/TI | 15 HOLE REFERENCE STANDARD 6AL4V 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 15 EDM NOTCHES .030X.030 CORNER. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2054AL-2 | CUSTOM ALUMINUM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1016-NDT1021, 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. WITH HOLE DIAMETERS: .125" .156", .187", .250",.375",.500". CORNER... | 1 | |
| AFNDT-2054CS-1 | CUSTOM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1040-NDT1045, 707, 727, 737, 747 PT 6 51-00-00 FIG 19, 757, 767 PT 6 51-00-17, 777 PT 6 51-00-05 PROCEDURE 2, 787 PT 6 51-00-04 PROCEDURE 1. DIAMETERS: .156",.250",.312",.375",.437",.500". CORN... | 1 | |
| AFNDT-2054CS-2 | CUSTOM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1040-NDT1045, 707, 727, 737, 747 PT 6 51-00-00 FIG 19, 757, 767 PT 6 51-00-17, 777 PT 6 51-00-05 PROCEDURE 2, 787 PT 6 51-00-04 PROCEDURE 1. DIAMETERS: .125", .156", .187" ,.250",.375", .500". ... | 1 | |
| AFNDT-2060 | CUSTOM REFERENCE STANDARD 7075-T6, NOTCH .010 +/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2063 | 10 HOLE REFERENCE STANDARD 6AL-4V TITANIUM, HOLE SIZES: 1/8, 3/16 , 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, .030X.030 CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .75L X.010,.020,.040 DEEP. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2063AL | 11/16" HOLE STANDARD IN 7075-T6 with .030" x .030" CORNER EDM NOTCH. MATERIAL SIZE 2.0" x 2.0" x .375". Includes Test Report and Certificate of Conformance.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2063S | 10 HOLE REFERENCE STANDARD 4340 STEEL, HOLE SIZES: 1/8, 3/16 , 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, .030X.030 CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .75L X.010,.020,.040 DEEP. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2064/AL | SAFRAN MESSIER-BUGATTI-DOWTY ET SURFACE REFERENCE STANDARD 32-09-01 FIGURE 67,GRAPHIC-32-09-01-041-008-A01. MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of conformance. | 1 | |
| AFNDT-2064/MAG | SAFRAN MESSIER-BUGATTI-DOWTY REFERENCE STANDARD 32-09-01 MAGNESIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2064/TI | SAFRAN MESSIER-BUGATTI-DOWTY REFERENCE STANDARD 32-09-01 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2066/TI | 12 HOLE REFERENCE STANDARD 6AL-4V TITANIUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .005" +/- .001" WIDE THRU NOTCH. .008", .020", .040" SURFACE NOTCHES. .005" +/-.001". Includes Test Report and C | 1 | |
| AFNDT-2066A | 12 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .005" +/- .001" WIDE THRU NOTCH. .008", .020", .040" SURFACE NOTCHES. .005" +/-.001". Includes Test Report and | 1 | |
| AFNDT-2069/Ti | Custom Bolt Hole Standard 6Al-4v Titanium. Contains 12 hole sizes; 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, and 7/8 inch diameters.( .050" x .050" +/- .005" x .005"W +0.000" / -0.002" Corner EDM Notch. Per Boeing Specification 77... | 1 | |
| AFNDT-2069AL | 13 HOLE REFERENCE STANDARD 7075-T6 aluminum. Hole Sizes: 3/16(.1875), 13/64(.203), 7/32(.218), 15/64(.234),1/4(.250), 17/64(.265), 9/32(.281), 19/64(.297), 5/16(.312),21/64(.328),11/32(.343), 23/64(.359), 3/8(.375). EDM NOTCH: .030" X. 030" x.005" ±.... | 1 | |
| AFNDT-2069TI | 13 HOLE REFERENCE STANDARD 6AL-4V Titanium. Hole Sizes: 3/16(.1875), 13/64(.203), 7/32(.218), 15/64(.234),1/4(.250), 17/64(.265), 9/32(.281), 19/64(.297), 5/16(.312),21/64(.328),11/32(.343), 23/64(.359), 3/8(.375). EDM NOTCH: .030" X. 030" x.005" ±.00... | 1 | |
| AFNDT-2071 | BOEING REFERENCE STANDARD 767 PT 4 51-00-04. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2073AL | 12 HOLE REFERENCE STANDARD 7075-T6 aluminum. Hole Sizes: 25/64(.390), 13/32(.406), 27/64(.421),7/16(.437), 29/64(..453), 15/32(..468), 31/64(.484),1/2(.500), 33/64(.515),17/32(.531), 35/64(.546), 9/16(.562). EDM NOTCH: .030" X. 030" x.005" ±.001" WIDE... | 1 | |
| AFNDT-2073TI | 12 HOLE REFERENCE STANDARD 6AL-4V Titanium. Hole Sizes: 25/64(.390), 13/32(.406), 27/64(.421),7/16(.437), 29/64(..453), 15/32(..468), 31/64(.484),1/2(.500), 33/64(.515),17/32(.531), 35/64(.546), 9/16(.562). EDM NOTCH: .030" X. 030" x.005" ±.001" WIDE ... | 1 | |
| AFNDT-2075/TI | REFERENCE STANDARD TO NDT | 1 | |
| AFNDT-2076AL | 10 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. Hole Sizes: 1/8", 5/32", 3/16", 7/32" ,1/4", 9/32", 5/16", 3/8", 7/16", 1/2", .030" X. 030" x.005" +/- .001" WIDE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2076TI | 10 HOLE REFERENCE STANDARD 6AL-4v TITANIUM. Hole Sizes: 1/8", 5/32", 3/16", 7/32" ,1/4", 9/32", 5/16", 3/8", 7/16", 1/2", .030" X. 030" x.005" +/- .001" WIDE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2083 | 10 HOLE REFERENCE STANDARD 2024-T3, HOLE SIZES, 1/8,5/32, 3/16 , 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, .030X.030 CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .75L X.010,.020,.040 DEEP. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2094/6.2 | EMBRAER REFERENCE STANDARD 57-28-00 PT 2, HOLE SIZE 6.2. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2094/7.8 | EMBRAER REFERENCE STANDARD 57-28-00 PT 2, HOLE SIZE 7.8. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2094/8.2 | EMBRAER REFERENCE STANDARD 57-28-00 PT 2, HOLE SIZE 8.2. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2099/S | 5 STEP STANDARD .050, .100, .200, .300, .400, 1018 STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-21-6-9 | CUSTOM REFERENCES STANDARD PER AMSS5561. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2106 | 3 HOLE REFERENCE STANDARD 2024-T3 ALUMINUM.. HOLE SIZES: 5/32", 3/16", 1/4" TOTAL OF 3 EDM CORNER NOTCHES .030" x .030".N Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2116 | CUSTOM EC REFERENCE STANDARD BRT189-080 REV A, STEEL 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2122/C/1.5/.050 | BEECHCRAFT STANDARD CURVED, 1.5Ø, .050. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2122/C/1.5/.100 | BEECHCRAFT STANDARD CURVED, 1.5Ø, .100. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2122/C/2.5/.050 | BEECHCRAFT STANDARD CURVED, 2.5Ø, .050. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2122/C/2.5/.100 | BEECHCRAFT STANDARD CURVED, 2.5Ø, .100. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2122/F.050 | BEECHCRAFT STANDARD FLAT .050. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2122/F.100 | BEECHCRAFT STANDARD FLAT .100. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2123AL | 12 HOLE REFERENCE STANDARD 7075-T6, 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", .005" +/-.001" THROUGH NOTCH ON EACH HOLE and A .030" x .030" x .005+/- .001" CORNER NOTCH IN EACH HOLE. SURFACE NOTCHES: .008", .020"... | 1 | |
| AFNDT-2123S | 12 HOLE REFERENCE STANDARD 4340 STEEL, 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", .005" +/-.001" THROUGH NOTCH ON EACH HOLE and A .030" x .030" x .005+/- .001" CORNER NOTCH IN EACH HOLE. SURFACE NOTCHES: .008", .0... | 1 | |
| AFNDT-2123TI | 12 HOLE REFERENCE STANDARD 6AL-4v TITANIUM, 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", .005" +/-.001" THROUGH NOTCH ON EACH HOLE and A .030" x .030" x .005+/- .001" CORNER NOTCH IN EACH HOLE. SURFACE NOTCHES: .008... | 1 | |
| AFNDT-2124 | CUSTOM REFERENCE STANDARD PER SPEC, 2024-T42. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2127 | SAFRAN MESSIER -BUGATTI-DOWTY REFERENCE STANDARD Material aluminum 7075-T6; Thickness 1/2". - Number of holes 5;- hole diameter 9/16 in, 10/16 in, 11/16 in, 12/16 in, 13/16 in; EDM notch in each hole: thru the thickness, depth and width in according with | 1 | |
| AFNDT-2130AL | 9 HOLE REFERENCE STANDARD 7075-T6, HOLE SIZES, 1/2",, 9/16" , 5/8", 11/16, 3/4", 13/16", 7/8", 15/16", 1.0", .030X.030 CORNER NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2130S | 9 HOLE REFERENCE STANDARD 4130 STEEL, HOLE SIZES, 1/2",, 9/16" , 5/8", 11/16, 3/4", 13/16", 7/8", 15/16", 1.0", .030X.030 CORNER NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2130TI | 9 HOLE REFERENCE STANDARD 6Al-4V Titanium , HOLE SIZES, 1/2",, 9/16" , 5/8", 11/16, 3/4", 13/16", 7/8", 15/16", 1.0", .030X.030 CORNER NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2132/2024-T3 | 20 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 1/8, 5/32, 11/64, 3/16, 13/64, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 5/8, 11/16, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001. MID-WALL EDM NOTC | 1 | |
| AFNDT-2132/7075-T6 | 20 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 1/8, 5/32, 11/64, 3/16, 13/64, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 5/8, 11/16, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001. MID-WALL EDM NOTC | 1 | |
| AFNDT-2133/304L | 20 HOLE REFERENCE STANDARD 304L STAINLESS STEEL. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 17/32, 9/16,19/32, 5/8, 21/32, 11/16, 23/32, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001. I | 1 | |
| AFNDT-2133/4130 | 20 HOLE REFERENCE STANDARD 4130 CARBON STEEL. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 17/32, 9/16,19/32, 5/8, 21/32, 11/16, 23/32, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001. Incl | 1 | |
| AFNDT-2133/6AL4V | 20 HOLE REFERENCE STANDARD 6AL-4V TITANIUM. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 17/32, 9/16,19/32, 5/8, 21/32, 11/16, 23/32, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001. Includ | 1 | |
| AFNDT-2133/7075T6 | 20 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 17/32, 9/16,19/32, 5/8, 21/32, 11/16, 23/32, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001. Inclu | 1 | |
| AFNDT-2133AL-1 | 20 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 17/32, 9/16,19/32, 5/8, 21/32, 11/16, 23/32, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001 NOTCH | 1 | |
| AFNDT-2133TI | 20 HOLE REFERENCE STANDARD 6AL-4V TITANIUM. HOLE SIZES: 1/8, 5/32, 11/64, 3/16, 13/64, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 5/8, 11/16, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001 Includes Test Repor | 1 | |
| AFNDT-2136 | 12 HOLE REFERENCE STANDARD 6061-T6. HOLE SIZES: 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4". .030" x .030" x .005" +/- .001" W CORNER NOTCH IN EACH HOLE. SURFACE NOTCHES: .008", .020", .040" . .005" +/-.001". Includ | 1 | |
| AFNDT-2137/6AL4V | 3 HOLE REFERENCE STANDARD 6AL-4V TITANIUM. HOLE SIZES: 7/32, 1/4, 9/32 TOTAL OF 3 EDM THROUGH NOTCHES .020 DEEP. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2138/6AL-4V | 3 HOLE COUNTERSINK REFERENCE STANDARD 6AL-4V TITANIUM. HOLE SIZES: 7/32, 1/4, 9/32 TOTAL OF 3 EDM THROUGH NOTCHES .020 DEEP. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2140/304L | 11 HOLE REFERENCE STANDARD IN 304L STAINLESS STEEL; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), WITH .030"x.030" CORNER EDM NOTCH IN EACH HOLE.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2140/4130 | 11 HOLE REFERENCE STANDARD IN 4130 CARBON STEEL; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16,5/8,11/16, 3/4), WITH .030"x.030" CORNER EDM NOTCH IN EACH HOLE.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2140/6AL4V | 11 HOLE REFERENCE STANDARD IN 6AL-4v Ti; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), WITH .030"x.030" CORNER EDM NOTCH IN EACH HOLE.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2140/7075 | 11 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), WITH .030"x.030" CORNER EDM NOTCH IN EACH HOLE.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2141AL | 12 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .030" x .030" CORNER EDM NOTCH and .020" MID-WALL EDM NOTCH IN EACH HOLE. Tolerance: .005" +/-.001". Includes Test Repo | 1 | |
| AFNDT-2144 | 13 HOLE REFERENCE STANDARD 7075-T6 Auminum. Hole Sizes: (5/32",3/16", 7/32" ,1/4", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 1.0"), . 040" DEEP x .005" WIDE +0.00/-.002" THROUGH EDM NOTCH in EACH HOLE. Includes Test Report and Certificate of Co | 1 | |
| AFNDT-2145AL | Custom calibration standard containing 4 hole sizes of 5mm, 6mm, 8mm and 10mm. Each hole has a .100" x .100" x .005" W +/- .002". Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2145MG | Custom calibration standard containing 4 hole sizes of 5mm, 6mm, 8mm and 10mm. Each hole has a .100" x .100" x .005" W +/- .002". Material: Mgnesium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2149AL | 13 HOLE REFERENCE STANDARD 7075-T7 Auminum. Hole Sizes: (5/32",3/16", 7/32" ,1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.0"), . 020" DEEP x .005" MAX WIDTH THROUGH EDM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2149AL-1 | 13 HOLE REFERENCE STANDARD 7075-T7 Auminum. Hole Sizes: (5/32",3/16", 7/32" ,1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.0"), . 040" DEEP x .005" MAX WIDTH THROUGH EDM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2149SS | 13 HOLE REFERENCE STANDARD 304 Stainless Steel. Hole Sizes: (5/32",3/16", 7/32" ,1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.0"), . 020" DEEP x .005" MAX WIDTH THROUGH EDM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2150AL | 9 HOLE REFERENCE STANDARD 7075-T6, HOLE SIZES, 3/16",, 7/32" , 9/32", 5/16, 11/32", 3/8", 7/16", 5/8", 3/4", CORNER EDM NOTCH .030X.030 +/- 10%; WIDTH: .005+/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2227TI | CUSTOM TITANIUM EDDY CURRENT MULTI HOLE STANDARD WHICH COMBINES BOEING PART NUMBERS NDT1022-NDT1027 STANDARDS INTO ONE PART..HOLE SIZES ( 0.188", 0.250", 0.313", 0.375",0.438", 0.500" ). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AFNDT-2227Ti | CUSTOM TITANIUM EDDY CURRENT MULTI HOLE STANDARD WHICH COMBINES BOEING PART NUMBERS NDT1022-NDT1027 STANDARDS INTO ONE PART..HOLE SIZES ( 0.188", 0.250", 0.313", 0.375",0.438", 0.500" ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2227Ti-1 | 8 Hole Calibration Standard, Hole Sizes; 1/8" 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", EDM NOTCH: .050" x .050" x .005" +0.000/-.002" BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, 737 PT 6 51-00-00 FIG 3 PROCEDURE 17, PG.8 MATERIAL(6AL-4V) TIT | 1 | |
| AFNDT-3001 | Embraer 170 reference standard with a .473" diameter hole. Per NDTM PT1 51-00-00-916-802-A , 1.4mm x 1.4mm +/-.05mm long x 0.1mm +/-.05 wide corner EDM notch. Material: 7050-T7 Aluminum. Block size 2.0" x 2.0" x .375". Includes Test Report and Certifica | 1 | |
| AFNDT-3007 | SURFACE NOTCH REFERENCE STANDARD 15-5 PH STEEL. EDM NOTCH SIZE: FULL WIDTH OF PART x .20mm(.008") WIDE x .50mm(.020") DEEP +/- .05mm(.002"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3009 | CUSTOM BOLT HOLE STANDARD 6AL-4V TITANIUM. HOLE SIZES: 7/32", 7/4", 9/32" CONTAINING 0.020" DEEP x .005" WIDE edm NOTCHES IN THE COUNTERSINK OF EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3011AL | 4 HOLE REFERENCE STANDARD 7075-T6,1/8"(3.2mm),5/32"(3.9mm),1/4"(6.5mm),9/32"(7.1mm), .005" +/-.001" THROUGH NOTCH ON EACH HOLE and .030" x .030" x .005+/- .001" CORNER NOTCH IN EACH HOLE. .005" +/-.001". Includes Test Report and Certificate of Confor... | 1 | |
| AFNDT-3012AL | 9 HOLE REFERENCE STANDARD PER BOEING 737 NTM 51-00-00 PG 9 FIGURE 3 SPECIFICATION. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES, 1.0",1.125",1.250", 1.375", 1.500"", 1.625", 1.750", 1.875", 2.00", .030"x.030" and .020"x.020" CORNER NOTCH .005+/-.002. Includ... | 1 | |
| AFNDT-3015 | EMBRAER 170/190 SERIES EDDY CURRENT SURFACE REFERENCE STANDARD 50-00-00 PT 1 PAGE 4, Aluminum(7075-T6) 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05mm WIDE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3018TI | CUSTOM TITANIUM BORE HOLE STANDARD WITH 2.200" BORE with 2 EDM FLAWS .030" CORNER NOTCH, .060"x.030" MID-BORE NOTCH. MATERIAL: 6AL-4V. SIZE 3.0" X 3.0" X 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3019S | CUSTOM AIR FORCE EDDY CURRENT BOLT HOLE STANDARD PER CUSTOMER SUPPLIED DRAWING, 1/4" 8630 STEEL PLATE (4130 EQUIVALENT ALTERNATIVE). EDM: 0.030 x 0.030 CORNER NOTCH. HOLE DIAMETER= 0.437Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3025AL | Eddy Current Surface Standard 7075-T6 Aluminum. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W x... | 1 | |
| AFNDT-3025CS | Eddy Current Surface Standard 4340 Carbon Steel. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W ... | 1 | |
| AFNDT-3025INC | Eddy Current Surface Standard 718 Inconel. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W x (25m... | 1 | |
| AFNDT-3025SS | Eddy Current Surface Standard 304 Stainless Steel. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)... | 1 | |
| AFNDT-3025TI | Eddy Current Surface Standard 6AL-4V Titanium. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W x ... | 1 | |
| AFNDT-3026AL | EDDY CURRENT SURFACE REFERENCE STANDARD Leonardo Helicopters SB No. 109EP-158. MATERIAL: 7475-T7 ALUMINUM. SIZE: 1.0" x 3.0" x .25" EDM SLOT (0.5mm DEEP) x (0.05-0.25mm WIDE) +/-.03mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3027AL | MHS style Multi-Hole reference standard (Aluminum 7075-T6 with certifications). 12 Holes 3/16", 7/32", 1/4" ,9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" ( .030 x .030 x .006 +/- .001) Corner Notches and .010, .020, .040 Surface notch... | 1 | |
| AFNDT-3028AL | 3i-Hole reference standard (Aluminum 7075-T6 with certifications). Hole Sizes , 7/16", 1/2" and 11/16" ( .030 x .030 x .006 +/- .001) Corner Notches. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3032 | 3 HOLE 100° COUNTERSINK REFERENCE STANDARD 2024-T3 ALUMINUM, PLATE SIZE: 3.0" x 2.0" x 1/4" . HOLE SIZES: 5/32", 3/16" and 1/4" TOTAL OF 3 EDM NOTCHES .040" +0.004"/-0.000" Long x .007" Max Width Through the Depth of the Countersink. | 1 | |
| AFNDT-3032-1 | 3 HOLE 100° COUNTERSINK REFERENCE STANDARD 7075-T6 ALUMINUM, PLATE SIZE: 3.0" x 2.0" x 1/4" . HOLE SIZES: 3/16", 7/32" and 1/4" TOTAL OF 3 CORNER EDM NOTCHES: .030" +0.004"/-0.000" Long x .007" Max Width Through the Depth of the Countersink. Includes Tes | 1 | |
| AFNDT-3034AL | Custom Bolt Hole / Countersink Reference Standard Combination Containing 6 Bolt Hole Sizes of .171", .218", .281", .343", .406", .500". EDM Slot Size: .030" x .030" x .005" Wide +/- .001". 5 Holes with 100° Countersinks, Hole Sizes: .218", .312", .37... | 1 | |
| AFNDT-3051AL | (Aluminum Multi-hole reference standard with certificate. Contains 2 rows of 6 hole sizes. The first row has no flaws or side drilled holes. The second row includes side drilled holes. Hole Sizes: 3/16", 1/4", 5/16", 3/8", and 1/2". Material: 7075-T6 ... | 1 | |
| AFNDT-3052AL | (Aluminum Multi-hole reference standard with certificate. Contains 2 rows of 29 hole sizes. The first row has no flaws or side drilled holes. The second row includes side drilled holes. Hole Sizes: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32"... | 1 | |
| AFNDT-3056AL | 10 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. Hole Sizes: 3/16", 7/32" ,1/4", 9/32", 5/16", 3/8", 7/16", 1/2", 9/16', 5/8". Corner EDM Notches: .020" x .020" x .005" +/- .001" Wide and Mid-Wall EDM Notches .020" x .020" x .005" +/- .001" Wide in Each... | 1 | |
| AFNDT-3059 | Custom Eddy Current 2 Hole Calibration Standard per Customer Supplied Drawing. Material: 7050-T7451. Hole Sizes: .516"Ø and .812"Ø with a total of 4 EDM Notches 0.021" x 0.021" x .004" Wide Max. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3060 | Custom Eddy Current 2 Hole Calibration Standard per Customer Supplied Drawing. Material: 7050-T7451. Hole Sizes: .252"Ø and .516"Ø with a total of 4 EDM Notches 0.021" x 0.021" x .004" Wide Max. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3071 | Custom designed eddy current multi-layer aircraft aluminum skin test specimen, drawing 2, sheets 1-4. reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 1 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 2 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 3 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3081AL | 3 HOLE REFERENCE STANDARD 2024-T3 ALUMINUM.. HOLE SIZES: 5/16", 3/8", 7/16" TOTAL OF 3 EDM CORNER NOTCHES .030" x .030". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3104 | The VMA.01-0-07 reference standard is ..3 ½” long x 3.0” wide x 1/4” thick...• The tapered notch on both standards is 0.080” deep at the edge of the standard and tapers to 0.000” deep...• The tapered notch has scribe marks every 0.010” deep from 0.000”... | 1 | |
| AFNDT-3110A | Custom Multi-Hole Standard made to the Specifications of 99A53003001101. Material: 2024-T351. 48 Total Hole Sizes: 33/64, 17/32, 35/64, 9/16, 37/64, 19/32, 39/64, 5/8, 41/64, 21/32,43/64, 11/16. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3110B | Custom Multi-Hole Standard made to the Specifications of 99A53003001101. Material: 2024-T351. 36 Total Hole Sizes: 45/64, 23/32, 47/64, 3/4, 49/64, 25/32, 51/64, 13/16, 53/64. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3110C | Custom Multi-Hole Standard made to the Specifications of 99A53003001101. Material: 2024-T351. 24 Total Hole Sizes: 27/32, 55/64, 7/8, 57/64, 29/32, 59/64. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3110D | Custom Multi-Hole Standard made to the Specifications of 99A53003001101. Material: 2024-T351. 20 Total Hole Sizes: 15/16, 61/64, 31/32, 63/64, 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3114 | 16 HOLE REFERENCE STANDARD 6AL-4V TITANIUM. 2 OF EACH HOLE SIZES: 3/16", 13/64" 7/32" , 1/4", 17/64", 9/32", 7/16", 9/16". .030" x .030" CORNER NOTCH IN 1st HOLE SET and .060" x .020" MID-WALL NOTCH IN 2nd HOLE SET. Tolerance: .006" +/-.001". Includ... | 1 | |
| AFNDT-3115 | 16 HOLE REFERENCE STANDARD 4340 CRES STEEL. 2 OF EACH HOLE SIZES: 3/16", 13/64" 7/32" , 1/4", 17/64", 9/32", 7/16", 9/16". .030" x .030" CORNER NOTCH IN 1st HOLE SET and .060" x .020" MID-WALL NOTCH IN 2nd HOLE SET. Tolerance: .006" +/-.001". Includ... | 1 | |
| AFNDT-3116 | 16 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. 2 OF EACH HOLE SIZES: 3/16", 13/64" 7/32" , 1/4", 17/64", 9/32", 7/16", 9/16". .030" x .030" CORNER NOTCH IN 1st HOLE SET and .060" x .020" MID-WALL NOTCH IN 2nd HOLE SET. Tolerance: .006" +/-.001". Inclu... | 1 | |
| AFNDT-3120AL | 11 hole Reference Standard 7075-T6 Aluminum. Contains 10 hole sizes; 7/64, 1/8, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4 and 1.0 inch diameters.( .030X.030 Corner EDM Notch and 3 Surface EDM Notches at .010", .020", .040" DEEP x .750" LONG.) Includes T... | 1 | |
| AFNDT-3121S | 10 hole Reference Standard 4340 or 4130 Carbon Steel. Contains 10 hole sizes; 1/8, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 inch diameters.( .030" x .030" +/- 10% x .006" +/- .001" Wide Corner EDM Notch and 3 Surface EDM Notches at .010", .020", ... | 1 | |
| AFNDT-3122T-0 | 10 hole Reference Standard 6AL-4v Titanium. Contains 10 hole sizes; 1/8, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 inch diameters.( .030" x .030" +/- 10% x .006" +/- .001" Wide Corner EDM Notch and 3 Surface EDM Notches at .010", .020", .040" Dee... | 1 | |
| AFNDT-3122T-4 | 10 hole Reference Standard 6AL-4v Titanium. Contains 10 hole sizes; 1/8, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 inch diameters.( .050" x .050" +/- 10% x .006" +/- .001" Wide Corner EDM Notch and 3 Surface EDM Notches at .010", .020", .040" Dee... | 1 | |
| AFNDT-3128AL | BOEING ALL AIRCRAFT MODELS 51-00-16 PT 6 FIG 3. MULTIHOLE STANDARD WITH 11 HOLES SIZES: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.00". EDM NOTCHES: .020 x .020 X .005" +/-0.002 wide on one side and .030 x .030 .005" +/-0.002 wi... | 1 | |
| AFNDT-3129CS | BOEING ALL AIRCRAFT MODELS 51-00-17 PT 6 FIG 3. MULTIHOLE STANDARD WITH 11 HOLES SIZES: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.00". EDM NOTCHES: .030 x .030 .005" +/-0.002. MATERIAL: 4340 STEEL. Includes Test Report Traceab... | 1 | |
| AFNDT-3130TI | BOEING ALL AIRCRAFT MODELS 51-00-14 PT 6 FIG 3. MULTIHOLE STANDARD WITH 11 HOLES SIZES: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.00". EDM NOTCHES: .050 x .050(+/-.005") x .005" (+0.00/-.002). MATERIAL: 6AL-4V TITANIUM. Includ... | 1 | |
| AFNDT-3133 | CUSTOM 100° COUNTERSINK BOLT HOLE STANDARD MAUNUFACTURED TO BOEING PART NUMBER 194A, 737 PART 6 53-30-00. MATERIAL: 2024-T3 CLAD ALUMINUM. HOLE SIZES: 2 HOLES 8.6mmØ. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3139AL | 11 HOLE REFERENCE STANDARD in 7075-T6 Aluminum; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6... | 1 | |
| AFNDT-3139CS | 11 HOLE REFERENCE STANDARD in 4130 Carbon Steel; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16,5/8,11/16, 3/4), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6... | 1 | |
| AFNDT-3139TI | 11 HOLE REFERENCE STANDARD in 6AL-4V Titanium; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6 ... | 1 | |
| AFNDT-3140AL | 7 HOLE REFERENCE STANDARD in 7075-T6 Aluminum; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6 FIG 3, 14 Notches Tota... | 1 | |
| AFNDT-3141AL | Custom McDonnell Douglas 12 bolt hole reference standard 7075-T6 Aluminum with a .060"L x .030Dx .005" max width mid-wall notch, and .030"x.030"x.005" max width corner notch in each hole. Hole sizes (.125, .156", .187", .250", .281", ..312", .375", .4... | 1 | |
| AFNDT-3141AL-1 | Custom McDonnell Douglas 12 bolt hole reference standard 7075-T6 Aluminum with .005" max width through EDM notch in holes #1-#6 and a .060"L x .030"D x .005" max width mid-wall notch in holes #7-12, and .030"x.030"x.005" max width corner notch in each hol | 1 | |
| AFNDT-3141AL-2 | Custom McDonnell Douglas 12 bolt hole reference standard 7075-T6 Aluminum with a .060"L x .030Dx .005" max width mid-wall notch, and .030"x.030"x.005" max width corner notch in each hole. Hole sizes (.2966, .3122", .3278", .3434", .359", ..3746", .3902", | 1 | |
| AFNDT-3145S | 12 HOLE REFERENCE STANDARD 4340 STEEL, 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", .020" x .005" +/-.001" THROUGH NOTCH ON EACH HOLE, A .030" x .030" x .005+/- .001" CORNER NOTCH IN EACH HOLE. SURFACE NOTCHES: .01... | 1 | |
| AFNDT-3147AL | 7 HOLE 100° COUNTERSINK REFERENCE STANDARD 2024-T3 ALUMINUM, PLATE SIZE: 3.0" x 2.5" x 3/8" . HOLE SIZES: 5/32", 3/16", 7/32",1/4", 5/16",3/8", 7/16". TOTAL OF 7 EDM NOTCHES .030" +0.002"/-0.002" Long x .007" Max Width Through the Depth of the Countersin | 1 | |
| AFNDT-3151AL | 15 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM, HOLE SIZES: 1/8, 5/32, 3/16, 7/32 ,1/4, 9/32, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4,,7/8,1.0" .030" x .030" CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .750"L x .010",.020",.040" DEEP. Includes Test Report and | 1 | |
| AFNDT-3151CS | 15 HOLE REFERENCE STANDARD 4130 OR 4340 CARBON STEEL, HOLE SIZES: 1/8, 5/32, 3/16, 7/32 ,1/4, 9/32, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4,,7/8,1.0" .030" x .030" CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .750"L x .010",.020",.040" DEEP. Includes Test Re | 1 | |
| AFNDT-3151SS | 15 HOLE REFERENCE STANDARD 304 STAINLESS STEEL, HOLE SIZES: 1/8, 5/32, 3/16, 7/32 ,1/4, 9/32, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4,,7/8,1.0" .030" x .030" CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .750"L x .010",.020",.040" DEEP. Includes Test Report a | 1 | |
| AFNDT-3153/7075T6 | 11 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 7/16, 1/2, 9/16), WITH .050"x.050" .005±.001 CORNER EDM NOTCH IN EACH HOLE. | 1 | |
| AFNDT-3154CS | Eddy Current Surface Standard Carbon Steel. 0.5mm, 1.0mm,2.0mm Deep x .15mm Wide +/- .05mm. Block Size: 5.0"(127mm)L x 2.0"(50.8mm)W x .25"(6.35mm). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3154SS | Eddy Current Surface Standard 316 Steel. 0.5mm, 1.0mm,2.0mm Deep x .15mm Wide +/- .05mm. Block Size: 5.0"(127mm)L x 2.0"(50.8mm)W x .25"(6.35mm). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3155AL | • Each standard is 6” long x 3” wide x 1/2” thick. Contains14 holes with diameters of: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8” & 3/4”..• Each hole contains a 0.050” x 0.050” corner notch at the bottom of th... | 1 | |
| AFNDT-3155AL-1 | • Each standard is 6” long x 3” wide x 1/2” thick. Contains14 holes with diameters of: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8” & 3/4”• Each hole contains a 0.050” x 0.050” corner notch at the bottom of the cou | 1 | |
| AFNDT-3159TI | 8 HOLE REFERENCE STANDARD 6AL-4v TITANIU., HOLE SIZES: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", .020" THROUGH NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3164AL | Custom NDI standard for F-15C/D inspection. Material: 2124-T8 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3167CS | CUSTOM HOLE REFERENCE STANDARD in 4130 OR 4340 STEEL; HOLE SIZES: 2 OF EACH SIZE HOLE FOR A TOTAL OF 4 HOLES. 2.5mm(.098"), ,3.5mm(.137") , WITH A .030"x.030" x .005" +/-.002" CORNER EDM NOTCH AND .020" x .005" THRU NOTCHES. | 1 | |
| AFNDT-3171AL | 17 HOLE REFERENCE STANDARD 7075-T6 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 11/16 and 3/4 diameters. Includes 15 Thru EDM Notches .040" +/- 10% x .005" +/- .001" Wide. Includes Test Report and Certificate ... | 1 | |
| AFNDT-3171CS | 17 HOLE REFERENCE STANDARD 4130/4340 Carbon Steel, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 11/16 and 3/4 diameters. Includes 15 Thru EDM Notches .040" +/- 10% x .005" +/- .001" Wide. Includes Test Report ... | 1 | |
| AFNDT-3171SS | 17 HOLE REFERENCE STANDARD 304 Stainless Steel, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 11/16 and 3/4 diameters. Includes 15 Thru EDM Notches .040" +/- 10% x .005" +/- .001" Wide. Includes Test Report and... | 1 | |
| AFNDT-3189AL | 11 HOLE REFERENCE STANDARD IN 2024-T3 ALUMINUM; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), WITH .020" x .020" x .005" +/-.001" CORNER EDM NOTCH IN EACH HOLE. Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3197AL | BOEING REFERENCE STANDARD 737 PT 6 51-00-00 FIGURE 3 PG.9 & 777 PT 6 51-00-02 PAGE 7-8. HOLE SIZES: 1.000", 1.250" . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3198TI | 10 HOLE REFERENCE STANDARD 6AL-4V Titanium.Hole Sizes: (3/16", 7/32" ,1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.005" +/-.002" WIDE & .020" X. 020" x.005" +/-.002" WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES .500... | 1 | |
| AFNDT-3204/4130 | 8 HOLE REFERENCE STANDARD IN 4130 CARBON STEEL; HOLE SIZES: (1/8, 5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2), WITH .020"x.020" CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3204/7075 | 8 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (1/8, 5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2), WITH .020"x.020" CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3218AL | CUSTOM HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: 9/64,10/64,11/64,12/64,13/64, 14/64, 15/64, 16/64, 17/64, 18/64, 19/64... | 1 | |
| AFNDT-3219AL | CUSTOM HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: 37/64,38/64,39/64,40/64,41/64, 42/64, 43/64, 44/64, 45/64, 46/64, 47/6... | 1 | |
| AFNDT-3220ST | CUSTOM HOLE STANDARD IN 4340 OR 4340M STEEL PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .030" x .030" x .005" +/- .002" HOLE SIZES: 9/64,10/64,11/64,12/64,13/64, 14/64, 15/64, 16/64, 17/64, 18/64, 19/64, 20/64, 21/64, 22/64, 23/64, 24/64, ... | 1 | |
| AFNDT-3221ST | CUSTOM HOLE STANDARD IN 4340 OR 4340M STEEL PER BOEING PART NUMBER NDT1083. EDM CORNER NOTCH SIZES: .030" x .030" x .005" +/- .002" HOLE SIZES: 37/64,38/64,39/64,40/64,41/64, 42/64, 43/64, 44/64, 45/64, 46/64, 47/64, 48/64, 49/64, 50/64, 51/64, 52/64... | 1 | |
| AFNDT-3222TI | CUSTOM HOLE STANDARD IN 6AL-4V TITANIUM PER BOEING PART NUMBER NDT1027. EDM CORNER NOTCH SIZES: .050" x .050" x .005" + 0.000 / - 0.002" HOLE SIZES:9/64,10/64,11/64,12/64,13/64, 14/64, 15/64, 16/64, 17/64, 18/64, 19/64, 20/64, 21/64, 22/64, 23/64, 24/... | 1 | |
| AFNDT-3223TI | CUSTOM HOLE STANDARD IN 6AL-4V TITANIUM PER BOEING PART NUMBER NDT1027. EDM CORNER NOTCH SIZES: .050" x .050" x .005" +0.000 / - 0.002" HOLE SIZES: 37/64,38/64,39/64,40/64,41/64, 42/64, 43/64, 44/64, 45/64, 46/64, 47/64, 48/64, 49/64, 50/64, 51/64, 5... | 1 | |
| AFNDT-3232F | Custom Hole Standard 2.0" x 2.0" x .25" Square. Material: Forged Aluminum. Hole Size: 16.5mm. EDM Corner Notch: .05mm x .05mm x .1mm Wide +/- 0.05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3235 | BOEING REFERENCE STANDARD PT 6 32-11-11. 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3239AL | 3 HOLE REFERENCE STANDARD 2024-T3 ALUMINUM. HOLE SIZES: 1/4", 5/16", 3/8" TOTAL OF 3 EDM CORNER NOTCHES .030" x .030". 3 EDM SURFACE NOTCHES 0.008", 0.020", 0.040". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3251AL | 12 HOLE REFERENCE STANDARD 2024-T3 ALUMINUM. HOLE SIZES: 1/8", 3/16" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8",11/16", 3/4", 13/16" .030" x .030" CORNER NOTCH and .020" x .020" CORNER NOTCH IN EACH HOLE. Tolerance: .005" +/-.001", 4 SURFACE EDM NOTCH | 1 | |
| AFNDT-3251TI | 12 HOLE REFERENCE STANDARD 6AL-4V TITANIUM. HOLE SIZES: 1/8", 3/16" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8",11/16", 3/4", 13/16" .030" x .030" CORNER NOTCH and .020" x .020" CORNER NOTCH IN EACH HOLE. Tolerance: .005" +/-.001", 4 SURFACE EDM NOTCHE | 1 | |
| AFNDT-3255AL | 11 HOLE REFERENCE STANDARD in 7075-T6 Aluminum; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), With a .020" x .020" x .005" +/-.002" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3264 | Custom Reference Standard for the Boeing Lead Screw inspection, equivalent to 7903385. Material: 4150 Alloy Steel, 1.5 Outside Diameter and 1.069" Inside Diameter with 3 EDM Flaws per BSS 7048 page 2 Table 1. Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3269AL | Custom Multi-Hole Standard manufactured to the Specifications of Airbus part number 99A53003001101. Material: 2024-T351. 8 Total Hole Sizes: 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10.0mm, 11.0mm, 12.0mm, 13mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3280 | Surface reference standard, 4340 Steel, with EDM notch depths of 0.5mm", 1.0" and 2.0mm +/-1.3mm, Notch Width: .18mm Max. Depth: +/- .03mm. Reference standard overall dImensions 25.4mm X 101.6mm X 6.4mm). Includeds .020" thick shim and Key Ring. Supplie | 1 | |
| AFNDT-3286 | 12 HOLE REFERENCE STANDARD 7075-T6 (Hole Sizes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1.0", 1-1/8",) .020"x.020" and .030"x.030" x .005"W +/-.002" CORNER EDM NOTCH PER BOEING SPECIFICATION 747 PART 6 51-00-00 PAGE 8 FIGURE 3 | 1 | |
| AFNDT-3287AL | Custom multi-hole 100° countersink reference standard Material: 7075-T6 Aluminum. Hole sizes: 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2". Countersink holes opposite side. Thru hole EDM notches in each hole, .020" Deep x .005" Wide +/-.001". Includes T | 1 | |
| AFNDT-3290AL | Custom ST Aerospace Engineering Multi-Hole Standard 2 Plate Assembly, Manufactured to the Customer Supplied Drawing Specifications . Material: 7075-T6 Aluminum. 6 Total Hole Sizes to be determined. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3292AL | CUSTOM 20 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .(1/8", 5/32",3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8",13/32" | 1 | |
| AFNDT-3295 | CUSTOM HOLE STANDARD IN 4340 OR 4340M STEEL PER BOEING PART NUMBER NDT1083 PART 6 51-00-00 PROCEDURE 19. EDM CORNER NOTCH SIZES: .030" x .030" x .005" +/- .002". 13 HOLE SIZES: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32, 9/ | 1 | |
| AFNDT-3299/4340 | 12 HOLE REFERENCE STANDARD . HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .005" +/- .002" WIDE MID-WALL EDM NOTCH. Material: 4340 Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3299/6AL-4V | 12 HOLE REFERENCE STANDARD . HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .005" +/- .002" WIDE MID-WALL EDM NOTCH. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3299/7075-T6 | 12 HOLE REFERENCE STANDARD . HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .005" +/- .002" WIDE MID-WALL EDM NOTCH. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3303AL | SINGLE HOLE REFERENCE STANDARD 2024-T3 ALUMINUM, HOLE SIZE 3/8"( .375) EDM CORNER NOTCHES .030" x .030". BLOCK SIZE: 2.0" x 2.0" x 1/4" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3307 | Custom 8 Hole Standard Manufactured to the Specifications of ATR Part Number 98S51605001-218, Part 6 51-60-00 Figure 616 Sheet 1. Material: 2024-T3 Aluminum, Block Size: .390" x 4.4" x 4.4"(10mm x 111.8mm x 111.8mm) . HOLE SIZES: 2.5mm and 3.2mm. Include | 1 | |
| AFNDT-3308AL | Eddy Current Calibration Standard 3/8” diameter hole standard. Material: 2024-T3 standard with a .030”x .030" corner notch. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3320AL | 6 Hole reference standard (Aluminum 7075-T6 manufactured in accordance with Boeing Specification 51-00-02 Part 6 Procedure 1 or 2. Hole Sizes: 15/32", 17/32", 9/16", 11/16", 5/8", 3/4" ( .020" x .020" x .005" +/- .002), ( .030" x .030" x .005" +/- .002 | 1 | |
| AFNDT-3321AL | 5 Hole reference standard (Aluminum 7075-T6 manufactured in accordance with Boeing Specification 51-00-16 Part 6 Page 9 Figure 3. Hole Sizes: 11.5mm, 14.4mm, 14.6mm, 17.4mm and 17.5mm. Corner EDM Notches ( .020" x .020" x .005" +/- .002), ( .030" x .0 | 1 | |
| AFNDT-3329ST | CUSTOM 12 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737 PT 6 51-00-00, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: 3/16”(.188), 7/32”(.218),1/4”(.250), 9/32”(.281), 5/16”(. | 1 | |
| AFNDT-3329TI | CUSTOM 12 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737 PT 6 51-00-00, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: 3/16”(.188), 7/32”(.218),1/4”(.250), 9/32”(.281), 5/16”(. | 1 | |
| AFNDT-3332AL | 20 HOLE REFERENCE STANDARD 2024-T3 ALUMINUM. HOLE SIZES: 1/8, 5/32, 11/64, 3/16, 13/64, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 5/8, 11/16, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001. TOTAL OF 20 SURFA | 1 | |
| AFNDT-3332CS | 20 HOLE REFERENCE STANDARD 4340 STEEL. HOLE SIZES: 1/8, 5/32, 11/64, 3/16, 13/64, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 5/8, 11/16, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001. TOTAL OF 20 SURFACE TO | 1 | |
| AFNDT-3338/17-4 | Surface reference standard, 17-4PH Steel, with EDM notch depths of 0.005", 0.010" and 0.020" inches +/-.001 (0.127mm, 0.254mm and .508mm), Notch Width: .004" +/-.001" Wide EDM notches, .005" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| AFNDT-3369/7075T6 | Custom 8 hole 100° countersink reference standard Material: 7075-T6 Aluminum. Hole sizes: 5/32", 3/16", 7/32" 1/4", 5/16", 3/8", 7/16", 1/2". Countersink holes opposite side. Thru hole EDM notches in each hole, .020" Deep x .005" Wide +/-.001". Includes | 1 | |
| AFNDT-3390AL | CUSTOM 10 HOLE FLAT BOTTOM REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .188", .218", .250", 312", .375" .437" .500",.562", .625", | 1 | |
| AFNDT-3391AL | CUSTOM 10 HOLE FLAT BOTTOM HOLE REFERENCE STANDARD ASSEMBLY PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .875", 1.00", 1.125", 1.250" 1.375", 1.500", | 1 | |
| AFNDT-3395 | CUSTOM EC SKIN INSPECTION REFERENCE STANDARD. Contains various EDM Nothes in the Upper and Lower Skin. Upper Skin Thickness of .080" and Lower Skin Thickness of .100" Thick. Standard Physical Size = 13.5" Long x 5.15" Wide. MATERIAL: 2024-T3 ALUMINUM. I | 1 | |
| AFNDT-3396CS | SURFACE NOTCH REFERENCE STANDARD 4130 or 4340 CARBON STEEL. EDM NOTCH SIZE: FULL WIDTH OF PART x .51mm(.020") DEEP +/- .05mm(.002"). BLOCK SIZE: 1.0" WIDE x 3.0" LONG. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3399S | 12 HOLE REFERENCE STANDARD 4340 STEEL.Hole Sizes: 6.35mm, 5.54mm, 4.75mm, 3.96mm, 3.18mm, 2.36mm. (1/4", 7/32", 3/16", 5/32", 1/8", 3/32"), 0.5mm x 0.5mm x 0.15mm (.0197" X .0197" x.0059")WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES 0.2mm, | 1 | |
| AFNDT-3405AL | CUSTOM 15 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737 PT 6 51-00-00, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: 3/16”(.188), 7/32”(.218),1/4”(.250), 9/32”(.281), 5/16”(. | 1 | |
| AFNDT-3412 | Custom Eddy Current Surface Standard with a Total of 12 EDM Notches. Notch Lenghs of .125, .250", .375" and .625". Notch Depths of .008", .020", and .040" for each length. Material: Nickel Aluminum Bronze. Includes Test Report and Certificate of Conforman | 1 | |
| AFNDT-3421/7075T6 | 12 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (5/32, 3/16, 7/32,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), WITH A .020"x.020" and .030"x.030" CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3422 | Titanium(6AL-4V) Multi-hole reference standard with certificate. Contains 20 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 1.0" inch. Each hole contains two EDM c | 1 | |
| AFNDT-3427AL | 1/8" HOLE STANDARD IN 7075-T6 with .020" x .020" x .005" CORNER EDM NOTCH. MATERIAL SIZE 2.0" x 2.0" x .375". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3431/718 | 12 HOLE REFERENCE STANDARD 718 INCONEL. HOLE SIZES: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8" .020" x .005" +/-.001" THROUGH EDM NOTCH ON EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3439/6AL-4V | EDDY CURRENT SUIRFACE STANDARD WITH A TOTAL OF THREE A3 TYPE SURFACE NOTCHES ORIENTATED AT 0°, 45° and 90°. MATERIAL: 6AL-4V TITANIUM. SIZE: 2.0" Wide X 4.0" Wide. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3439/718 | EDDY CURRENT SUIRFACE STANDARD WITH A TOTAL OF THREE A3 TYPE SURFACE NOTCHES ORIENTATED AT 0°, 45° and 90°. MATERIAL: 718 INCONEL SIZE: 2.0" Wide X 4.0" Wide. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3446 | SURFACE STANDARD MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. EDM SLOT (0.5mm(.020") DEEP) x (0.13mm(.05") WIDE) +/-.03mm. BLOCK SIZE 3.50" X 1.0" X .50 Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3456AL | CUSTOM 19 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737 PT 6 51-00-00 Procedure16 Figure 3 , 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Total of 19 Hole Sizes: .128", .159", .189", .2 | 1 | |
| AFNDT-3471AL | Custom Eddy Current Bolt Hole Calibration Standard Manufactured in Accordance with Airbus Specification 51-63-04. Total of 14 Hole Sizes x 4 For a Total of 56 Holes: Diameters 13.5mm(.531"), 14.1mm(.555"), 14.3mm(.563"), 15.0mm(.591"), 15.8mm(.622"), ... | 1 | |
| AFNDT-3472AL | Custom Eddy Current Bolt Hole Calibration Standard Manufactured in Accordance with Boeing Specification 51-00-00. Total of 14 with 28 EDM Notches. Hole Sizes: Diameters 13.5mm(.531"), 14.1mm(.555"), 14.3mm(.563"), 15.0mm(.591"), 15.9mm(.625"), 16.7mm(... | 1 | |
| AFNDT-3476CS | CUSTOM 6 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION..737 PART 6 51-00-00 FIG.3 PG. 8, 757 PT 6 51-00-17 PAGE 7 FIG 3 and 767 PT 6 51-00-16 PAGE 7 FIG 3. Includes Test Report and Certificate of Conformance..... Hole Sizes: .188", .250", .313", .3... | 1 | |
| AFNDT-3500/MAG | Surface reference standard, Magnesium, with EDM notch depths of 0.008", 0.020", 0.030 and 0.040" inches (0.2mm, 0.51mm, 0.76mm and 1.02mm). Reference standard overall dImensions 1 X 5 X 0.25 inches (2.54cm X 12.7cm X 6.35mm). EDM notches .007" W MAX Inclu | 1 | |
| AFNDT-3504TI | 12 HOLE REFERENCE STANDARD MANUFACTURED TO SPECIFICATION USAF T.O. 33-B-1-1. MATERIAL: 6AL-4V TITANIUM. HOLE SIZES: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/ 16" 5/8", 3/4" 0.020" x 0.004" +/-.001" Wide thru EDM NOTCHES. 4 tot... | 1 | |
| AFNDT-3507 | Custom 2 hole BOEING REFERENCE STANDARD MANUFACTURED PER 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Includes Test Report and Certificate of Conformance. ....HOLE SIZES: 0.344" (11/32''),0.562"... | 1 | |
| AFNDT-3513AL | SAFRAN MESSIER -BUGATTI-DOWTY REFERENCE STANDARD Material aluminum 7075-T6; Thickness 1/2"...- Number of holes 11;..- hole diameters: 14.0mm, 14.2mm, 14.4mm, 14.6mm, 15.6mm, 15.8mm, 16.1mm, 16.2mm, 16.3mm, 16.6mm, 16.9mm...EDM notch in each hole: thru ... | 1 | |
| AFNDT-3518AL | 12 Hole Standard - Hole Sizes; 3/16 inch (4.74mm) 7/32 inch (5.53mm) 1/4 inch (6.35mm) 9/32 inch (7.13mm) 5/16 inch (7.92mm) 11/32 inch (8.71mm) 3/8 inch (9.52mm) 7/16 inch (11.09mm) 1/2 inch (12.7mm) 9/16 inch (14.27mm) 5/8 inch (15.87mm) 3/4 inch (19... | 1 | |
| AFNDT-3519SS | 6 HOLE REFERENCE STANDARD IN 304 STAINLESS STEEL; HOLE SIZES: (1/8, 5/32, 3/16, 7/32, 1/4, 9/32), WITH .030"x.030" CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3541AL | EDDY CURRENT SURFACE STANDARD MANUFACTURED TO BSS 7698,..3 EDM NOTCHES: ( .010", .020", .030" Deep x .005" Wide ± .001 ), MATERIAL: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3541ST | EDDY CURRENT SURFACE STANDARD MANUFACTURED TO BSS 7698,.. 3 EDM NOTCHES: ( .010", .020", .030" Deep x .005" Wide ± .001 ), MATERIAL: 4340 Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3541TI | EDDY CURRENT SURFACE STANDARD MANUFACTURED TO BSS 7698, ..3 EDM NOTCHES: ( .010", .020", .030" Deep x .005" Wide ± .001 ), MATERIAL: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3551CS | 7 HOLE REFERENCE STANDARD in 4340 Steel; Hole Sizes: .875", 1.000", 1.100", 1.200", 1.300", 1.400", 1.500"), With a .030" x .030" x .004" ± .001" Corner EDM Notch in top and bottom of each hole in the top plate. 14 Notches Total. Includes Engraving, ... | 1 | |
| AFNDT-3554 | CUSTOM 4 HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: .875"(7/8"), .937" (15/16"), 1.0", 1.125". Includes Test Report and ... | 1 | |
| AFNDT-3555 | CUSTOM 5 HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: .531" (17/32"), .625" (5/8"), .750" (3/4"), .875"(7/8"), .906"(29/32... | 1 | |
| AFNDT-3560A | Corrosion Reference Standard used for verifying function of low frequency corrosion probes. It is 0.100” thick with simulated 5%, 10% and 20% material loss. Overall size: 7.50” x 3.50” (190 x 89 mm). Material: 2024-T3 Aluminum. Includes Certification. | 1 | |
| AFNDT-3560B | Corrosion Reference Standard used for verifying function of low frequency corrosion probes. It is 0.100” thick with simulated 5%, 10% and 20% material loss. Overall size: 7.50” x 3.50” (190 x 89 mm). Material: 7075-T6 Aluminum. Includes Certification. | 1 | |
| AFNDT-3669-1043 | BOEING COUNTERSINK REFERENCE STANDARD 737 PT6 51-00-00 PROCEDURE 19, 0.375” DIAMETER 100° COUNTERSINK HOLE. MATERIAL: 43404340M STEEL. SIZE: 2.0" X .375" THICK( ROUNDSQUARE. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AFNDT-AL-6061 | CUSTOM REFERENCES STANDARD PER AMS4083 | 1 | |
| AFNDT-ECRC82040 | Eddy Current Crack Standard Magnesium AZ-31 | 1 | |
| AFNDT-SRS-4A | SURFACE STANDARD ALUMINUM(2024-T351) 1 EDM SLOT (0.040 DEEP) | 1 | |
| AFNDT-SRS-4S | SURFACE STANDARD STEEL 4340 1 EDM SLOT (0.40 DEEP) | 1 | |
| AFNDT-SRS-4T | SURFACE STANDARD TITANIUM 1 EDM SLOT (0.40 DEEP) | 1 | |
| AFNDT-SS304 | CUSTOM REFERENCES STANDARD PER AMSS5564 | 1 | |
| AFNDT1016-12S-2024 | CUSTOM 12 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .188", .219", .250",.282", 313", .344", .375" .438" .500",.563", . | 1 | |
| AFNDT1016-12S-7075 | CUSTOM 12 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .188", .219", .250",.282", 313", .344", .375" .438" .500",.563", .6 | 1 | |
| AFP-1012 | 10 MHZ .125" dia focused Straight shaft pencil transducer with a .080" Replaceable tip. Standard microdot connector | 1 | |
| AFP-1012/90 | 10 MHZ 90° .125"Ø diameter focused pencil transducer with a .060" Replaceable tip. Standard microdot connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFP-1512 | 15 MHZ .125" dia focused Straight shaft pencil transducer with a .080" Replaceable tip. Standard microdot connector | 1 | |
| AFP-1512/90 | 15 MHZ 90° SHAFT .125" dia focused pencil transducer with a .060" Replaceable tip. Standard microdot connector | 1 | |
| AFP-7512 | 7.5MHZ .125" dia. High Resolution focused Straight shaft pencil transducer with a .080" Replaceable tip. Standard microdot connector. ( K-PEN style ) | 1 | |
| AFP-7512/90 | 7.5MHZ 90° angle head. High Resolution .125" dia focused pencil transducer with a .080" Replaceable tip. Standard microdot connector. K-PEN Style | 1 | |
| AFS-0506 | 5MHZ 51° SHEAR WAVE IN ALUMINUM. CASE SIZE .50" W x .80"L x .37"H, REFERENCE STANDARD NDT624 | 1 | |
| AFS-0507 | 5MHZ 32° SHEARWAVE IN ALUMINUM. CASE SIZE .50"X.80"L. HEIGHT TAPERS FROM .20"H FRONT TO .32" H BACK. REFERENCE STANDARD IS NDT624 | 1 | |
| AFS-0539 | Custom 5MHz 45 degree shearweave ring transducer which features both right and left scanning directions. Ref. Standard NDT796 | 1 | |
| AFS-0570-1L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR ( .328" )DIAMETER FASTENER HOLE'S (0.430" ) STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-1R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .328" )DIAMETER FASTENER HOLE'S (0.430" ) STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-2L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.438" & 0.500") DIAMETER FASTENER HOLE'S (0.430" & 0.590") STEPS OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-2R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.438" & 0.500") DIAMETER FASTENER HOLE'S (0.430" & 0.590") STEPS OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-3L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.642") DIAMETER FASTENER HOLE IN (0.570") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-3R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.642") DIAMETER FASTENER HOLE IN (0.570") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-4L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.438") DIAMETER FASTENER HOLE (0.710") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-4R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.438") DIAMETER FASTENER HOLE (0.710") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-5L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.625") DIAMETER FASTENER HOLE IN (0.850") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-5R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.625") DIAMETER FASTENER HOLE IN (0.850") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0572-1L | CUSTOM 45° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.340" ) STEP OF REFERENCE STANDARD NDT6091. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-1R | CUSTOM 45° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.340" ) STEP OF REFERENCE STANDARD NDT6091. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-2L | CUSTOM 50° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.240" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-2R | CUSTOM 50° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.240" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-3L | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-3R | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-4L | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .412" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-4R | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .412" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1032SS | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 45 degree shearwave in Steel, Side Microdot Connector. | 1 | |
| AFS-1033SS | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 60 degree shearwave in Steel, Side Microdot Connector. | 1 | |
| AFS-1034SS | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 70 degree shearwave in Steel, Side Microdot Connector. | 1 | |
| AFS-1160 | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 45 degree shearwave in Aluminum, Right Angle Microdot Connector. | 1 | |
| AFS-1161 | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 60 degree shearwave in Aluminum, Right Angle Microdot Connector. | 1 | |
| AFS-1175 | 70°. ANGLE BEAM TRANSDUCER in ALUMINUM, SIDE MOUNT MICRODOT CONNECTOR, .187" x .187" ELEMENT. CASE SIZE: .67'L x .26"W x .33"H. Includes Test Report and Certificate of Conformance. Reference: B767 Part 4 53-50-05. Standard Part number NDT679 | 1 | |
| AFS-1175T | 70°. ANGLE BEAM TRANSDUCER in ALUMINUM, .187" x .187" ELEMENT, TOP MOUNTED MICRODOT CONNECTOR. CASE SIZE: .67'L x .26"W x .33"H. Includes Test Report and Certificate of Conformance. Reference: B767 Part 4 53-50-05. Standard Part number NDT679 | 1 | |
| AFS-1202L | STANDARD TOOL - BUCKING BAR | 1 | |
| AFS-1225S | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 60 degree shearwave in Aluminum, Right Angle Microdot Connector. | 1 | |
| AFS-1225T | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 60 degree shearwave in Aluminum, Top Microdot Connector. Case Size: .375"L x .425"H x .325"W | 1 | |
| AFS-1346 | CUSTOM 2 ELEMENT RING TRANSDUCER FOR BORE HOLE INSPECTION WITH BOEING REFERENCE STANDARD 55-10-13 PAGE 9 FIGURE 2. TWO MICRODOT CONNECTORS "A" and "B" | 1 | |
| AFS-1394 | CARGOLUX CUSTOM 5MHz .187", 40° IN ALUMINUM SHEAR WAVE TRANSDUCER WITH A 1.00" RADIUS FOR THE BOEING REFERENCE STANDARD LUG 1B7- FITTING-SEQUENCE CARRIAGE ATTACHMENT INBOARD TRAILING EDGE FLAP. CASE SIZE: .500"L x .270"W x .350". Includes Test Report... | 1 | |
| AFS-2034SS | Sub Miniature Integral Angle Beam Transducers, Standard Series, 2.25 MHz, 0.120 inch x 0.250 inch; 70 degree shear in Steel, Right microdot Connector | 1 | |
| AFS-545AT | REF STANDARD AND PROBE | 1 | |
| AFS-5825 | Custom 5MHz 22° shear wave transducer .375" element. 1.90"(51mm) radius. Case Size: .75"L x .50"W x .25"H. Used with reference standard NDT3195. | 1 | |
| AFS-5826 | Custpm 5MHz 31° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3196. | 1 | |
| AFS-5827 | Custpm 5MHz 33° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3197. | 1 | |
| AFS-5828 | Custpm 5MHz 26° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3197. | 1 | |
| AFW-45/1.83R | 45° IN ALUMINUM LUCITE (PLEXIGLASS) WEDGE, 3/8-32 THREAD WITH A 1.83" RADIUS USED WITH A .25"Ø DIAMETER TRANSDUCER AFC-0520(ABT-0504). Includes Certificate of Conformance...Used with Fairchild Reference Standard part number 27-95031-001. | 1 | |
| AGE-02001-401 | KIT-REFERENCE STANDARD NDT | 1 | |
| AGE-04329-401 | SET REFERENCE STANDARD NDI | 1 | |
| AGE-04362-401 | SET-REFERENCE STANDARD , NDI | 1 | |
| AGE-04383-003 | REFERENCE STANDARD FOR WINDSHIELD POST | 1 | |
| AGE-04707-401 | SET - REFERENCE STANDARD NDI - GENERALEDDY CURRENT TEST | 2 | |
| AGE-04707-401 | SET - REFERENCE STANDARD NDI | 2 | |
| AGE-04900-401 | SET- REFERENCE STANDARD NDI | 4 | |
| AGE-05546-401 | REFERENCE STANDARD FOR BAGGAGE DOOR CUTOUT, NDI | 2 | |
| AGE-05697-401 | REFERENCE STANDARD NDI | 3 | |
| AGE-05698 | REFERENCE STANDARD HORIZONTAL STABILIZER | 1 | |
| AGE-05698-401 | REFERENCE STANDARD HORIZONTAL STABILIZER | 1 | |
| AGE-05698-403 | REFERENCE STANDARD HORIZONTAL STABILIZER | 1 | |
| AGE-05698-405 | REFERENCE STANDARD HORIZONTAL STABILIZER | 1 | |
| AGE-05700 | BAG REFERENCE STANDARD - FABRIC | 1 | |
| AGE-05700-401 | REFERENCE STANDARD BAG-FABRIC | 1 | |
| AGE04900-401 | EMBRAER 145 NDT CALIBRATION STANDARD PART | 4 | |
| AH-360-STD-S8 | DESOUTTER AH-360-STD-S8 QUICK RELEASE STANDARD HEAD 360DG 5/16-28 UNF | 1 | |
| AH-90-STD-S8 | DESOUTTER AH-90-STD-S8 QUICK RELEASE STANDARD HEAD 90DG 5/16-28 UNF | 1 | |
| AH-90-STD-T8 | DESOUTTER AH-90-STD-T8 STANDARD 90 DEGREE ANGLE HEAD | QUICK RELEASE | 3/16" COLLET SPINDLE | 1 | |
| AH135-600 | BLADE COVERS (STANDARD DESIGN) (set of 4) | 1 | |
| AHS29-1A-0 | (Aluminum Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/... | 1 | |
| AHS29-1A-2 | (Aluminum Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/... | 1 | |
| AHS29-1S-0 | Carbon Steel(4340) Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 2... | 1 | |
| AHS29-1SS-0 | (304 Stainless Steel Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16",... | 1 | |
| AHS29-1SS-1 | (Stainless Steel Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/… | 1 | |
| AHS29-1T-0 | Titanium(6AL-4V) Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/... | 1 | |
| AHS29-C2-A1 | CUSTOM 29 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM WITH 0.015" THRU EDM NOTCH AND 0.030X0.030 CORNER NOTCH. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AHS29-C30304 | 304 Stainless Steel Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/ | 1 | |
| AHS29-C30INC | Inconel 718 Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8 | 1 | |
| AHS29-C30TI | 6AL-4V Titanium Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", | 1 | |
| AJD070505-CS | CUTTING TOOL - STANDARD 9507M23 BEARING (AJD070505-CS) | 1 | |
| AJD070505-PR-P02 | BEARING LOAD TESTER - RAM, STANDARD 9507M23 BEARING (AJD070505-PR-P02) | 1 | |
| AJD070505-SS | SWAGING TOOL - STANDARD 9507M23 BEARING (AJD070505-SS) | 1 | |
| AJD070605-CS | CUTTING TOOL - STANDARD 2122M92 BEARING (AJD070605-CS) | 1 | |
| AJD070605-PRS | BEARING LOAD TESTER - RAM, STANDARD 2122M92 BEARING (AJD070605-PRS) | 1 | |
| AJD070605-SS | SWAGING TOOL - STANDARD 2122M92 BEARING (AJD070605-SS) | 1 | |
| AL 29-32 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-20-001. Also in 53-30-19 PART 6 PAGE 6 FIGURE 2. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL 2024-T3 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25" | 6 | |
| AL 35-45 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" Wide +0.00, - .002" and +/- .001" Depth), MATERIAL: 2124-T8 or 7075-T7 ALUMINUM. SIZE: 1.5"W x 3.75"L... | 8 | |
| AL-BOEING REF STD PART6 51-00-0 | AL REF STANDARD FOR BOEING NDT PART 6 51-00-00 PROCEDURE 16 | 1 | |
| AL35-45 | BOMBARDIER SURFACE REFERENCE STANDARD - 7075-T7ALUMINUM. FULL WIDTH EDM NOTCHES .008", .020", .040" (.005"W +/- .002, MAX.006) BLOCK SIZE: 3.75"L x 1.50"W x 0.25"H | 8 | |
| AM2563 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (AGSE) | 2 | |
| AM27118 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (AGSE) | 1 | |
| AMI 2600 | RVSM STANDARD INTERFACE CASE | 1 | |
| AMP-39-B-53-10-00-00A-31BA-K | REFERENCE STANDARD PER AW139 IETP 33rd Issue. Material: AISI 301-1/4 HARD STEEL, 7075 AL | 1 | |
| AMS2630C Custom | Custom Reference Standard Per SAE AMS2630C. material: Titanium Alloy, Ti6Al4V per AMS-4928R Annealed. Includes 2 EDM Flaws per customer supplied Drawing. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AN-111 | STANDARD PORTABLE CYLINDER HONE (SUNNEN) RANGE:2.5"-7" | 1 | |
| AN2551 | AERONAUTICAL STANDARD AN2551 RED PLASTIC 12-VOLT/24-VOLT 3-PIN NATO EXTERNAL POWER CONNECTOR | 2 | |
| AN670-55-31-102 | CALIBRATION REFERENCE STANDARD (CRS), MADE OF ALUMINUM WITH MULTIPLE LAYERS CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| AN670-55-31-110 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| ANDT 3004 | Reference standard ANDT 3004 | 3 | |
| ANDT 3019 | BOEING REFERENCE STANDARD 737 PART 6 53-30-16 PAGE 5 FIGURE 1. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| ANDT-1049 | Reference Standard ANDT-1049 | 3 | |
| ANDT-1050 | Reference Standard ANDT-1050 | 3 | |
| ANDT-1051 | Reference Standard ANDT-1051 | 4 | |
| ANDT-1052 | Reference Standard ANDT-1052 | 3 | |
| ANDT-1053 | Reference Standard ANDT-1053 | 5 | |
| ANDT-1054 | Reference Standard ANDT-1054 | 3 | |
| ANDT-1055 | Reference Standard ANDT-1055 | 3 | |
| ANDT-1056 | Reference Standard ANDT-1056 | 4 | |
| ANDT-1057 | Reference Standard ANDT-1057 | 3 | |
| ANDT-3019 | Reference Standard ANDT-3019 | 3 | |
| ANDT1015 | BOEING REFERENCE STANDARD 53-30-00 PT 6 FIG 5 and 737 51- 00-26. FASTENER (BACB30FN8-4, BACR15CE8D-4, BACR15BB8D-4). Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT1029A | Boeing Standard 707 53-30-07 PT6 PG102 | 1 | |
| ANDT1029B | Boeing Standard 707 53-30-07 PT6 PG 103 | 1 | |
| ANDT1049 | REFERENCE STANDARD (NDT) | 3 | |
| ANDT1050 | REFERENCE STANDARD B737 | 3 | |
| ANDT1051 | REFERENCE STANDARD B737 | 4 | |
| ANDT1052 | REFERENCE STANDARD 737 PT6 | 3 | |
| ANDT1053 | REFERENCE STANDARD B737 | 5 | |
| ANDT1054 | REFERENCE STANDARD 737 PT6 | 3 | |
| ANDT1056 | REFERENCE STANDARD 737 PT6 | 4 | |
| ANDT1079 | REFERENCE STANDARD (NDT) | 4 | |
| ANDT1080 | BOEING REFERENCE STANDARD 737 PT6 53-30-00: PG 7-8 FIG 2 Procedure 7/ 767 PT6 53-00-07: PG 6-7 FIG 2. Includes Test Report and Certificate of Conformance. FASTENER (BACR15BB5AD-4, BACR15BB6AD-4, BACR15BB7AD-4, BACR15BB8AD-4, ALL ALODINE) | 2 | |
| ANDT1081 | BOEING STANDARD 737 PT6 | 2 | |
| ANDT1082 | BOEING STANDARD 737 PT6 | 3 | |
| ANDT3004 | BOEING REFERENCE STANDARD 737 Part 6 53-30-12 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT3006 | BOEING REFERENCE STANDARD 737 Part 6 53-30-14 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT3016-B | BOEING REFERENCE STANDARD 737 PT 6 53-10-54 FIG 2 FASTENER (BACB15BB5D-4, ALL ALODINE). Includes Certification Report and Certificate of Conformance. | 4 | |
| ANDT3016B | BOEING REFERENCE STANDARD 737 PT6 53-10-54 PG 7 FG 2 | 4 | |
| ANDT3019 | BOEING REFERENCE STANDARD 737 Part 6 53-30-16 Page 5 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT378 | REFERENCE STANDARD B737 | 1 | |
| ANDT388 | BOEING 737 REFERENCE STANDARD PART 6 53-10-48, ..PAGE 11 FIGURE 4. Includes Test Report and Certificate of Conformance. | 1 | |
| ANDT390A | BOEING REFERENCE STANDARD 737 Part 6 53-10-47 Page 10 Figure 4. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| ANDT390B | BOEING REFERENCE STANDARD 737 Part 6 53-10-47 Page 11 Figure 5. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| ANDT4125 | Boeing Standard w/ certs | 1 | |
| ANDT4126 | BOEING REFERENCE STANDARD PT 6 53-30-00 FIGURE 6 PAGE 5 & 757 53-30-05 PT 6 FASTENER (BACR15CE6, ALL ALODINE). Includes Test Report and Certificate of Conformance. | 2 | |
| ANDT4218 | Boeing Standard 747 53-10-51 PT6 PG6 | 1 | |
| ANDT4223 | Boeing Standard 747 53-10-33 PT6 PG 8 | 1 | |
| ANET429-4 | "4 CHANNEL STANDARD ETHERNET TO ARINC429 INTERFACE | 1 | |
| AP-763 ECI | Flat Standard with Radius Notch, Cast Aluminum, per ABS PT3 32-42-05 PG15:PROC1 FIG11 | 1 | |
| APB-NDT001 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-02 Page 6 Frigure 2. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes | 1 | |
| APB-NDT003 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-02 Page 9-10 Figure 5. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Include | 1 | |
| APB-NDT004 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-01 Page 5-6 Figure 2. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Include | 1 | |
| APB-NDT005 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-02 Page 13-14. Figure 7. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Inclu | 1 | |
| APB-NDT006 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-53 Page 5-6 Figure 2. Material: 7075-T7 (40-44% IACS), 2324-T3 (29.5-33.5% IACS), and 2224-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Inclu | 2 | |
| APB-NDT011A | REFERENCE STANDARD B767 | 1 | |
| APB-NDT011B | REFERENCE STANDARD B767 | 1 | |
| APB-NDT011C | REFERENCE STANDARD B767 | 1 | |
| APB-NDT011D | REFERENCE STANDARD B767 | 1 | |
| APB-NDT012 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 4 57-20-03 Page 8 Figure 3. Material: 2224-T3 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT013 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 4 57-20-03 Page 10 Figure 4. Material: 2224-T3 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT014 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 4 57-20-03 Page 12 Figure 5. Material: 2224-T3 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT015 | BOEING AVIATION PARTNERS REFERENCE STANDARD 767 Part 6 57-20-09 Page 21-22 Figure 10. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Ce | 2 | |
| APB-NDT016 | BOEING AVIATION PARTNERS REFERENCE STANDARD 767 Part 6 57-50-09 Page 24-25. Figure 12 Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Ce | 1 | |
| APB-NDT3301 | AVIATION PARTNERS BOEING REFERENCE STANDARD 737 Part 6 57-20-34 Page 7-8 Figure 2. Material: 2024-T3 (28.5-32% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT3302 | AVIATION PARTNERS BOEING REFERENCE STANDARD 737 Part 6 57-20-35 Page 6 Figure 2. Material: 2024-T3, 7050-T7 (40-44% IACS), and 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT3801NG | BOEING REFERENCE STANDARD PT6 737 57-10-205 PAGE 7-8, FIGURE 2, SHEETS 1&2 | 2 | |
| APB-NDT3802NG | BOEING REFERENCE STANDARD PT 6 737 57-10-205 PAGE 11-12, FIGURE 4, SHEETS 1 & 2. | 2 | |
| APB-NDT5203 | AVIATION PARTNERS REFERENCE STANDARD 737 Part 6 57-20-02 Page 7-8 Figure 2. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate | 2 | |
| APB-NDT5204 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-02 Page 11-12 Figure 4. Material: 2224-T3 and 2324-T3 or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 2 | |
| APB-NDT5205 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-02 Page 15-16 Figure 6. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Cer | 2 | |
| APB-NDT5206 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 8-9 Figure 2. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | 2 | |
| APB-NDT5207 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 12-13 Figure 4. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Cer | 2 | |
| APB-NDT5208 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 16-17 Figure 6. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Cer | 2 | |
| APB-NDT5209 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 4 57-20-03 Page 9 Figure 2. Material: Airplane Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5301 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 15-16 Figure 6. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5302 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 11-12 Figure 4. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5303 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 7-8 Figure 2. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APEX-STANDARD-OVA-M | APEX-STANDARD-OVA-M;Observer Apex - Standard OVA Annual Maintenance | 1 | |
| APEX-STANDARD-SO | APEX-STANDARD-SO;Observer Apex - Standard - Software Only | 1 | |
| APEX-STANDARD-SO-M | APEX-STANDARD-SO-M;Observer Apex - Standard - Annual Maintenance | 1 | |
| APEX-STANDARD-SO-SUB-1 | APEX-STANDARD-SO-SUB-1;One-Year subscription for APEX Standard Software - 1TB Version | 1 | |
| APEX-STANDARD-SO-SUB-3 | APEX-STANDARD-SO-SUB-3;Three-Year subscription for APEX Standard Software - 1TB Version | 1 | |
| APEX-STD-AWS-3YEAR | APEX-STD-AWS-3YEAR;APEX STANDARD Annual 3-Year Subscription for AWS Cloud | 1 | |
| APEX-STD-AWS-ANNUAL | APEX-STD-AWS-ANNUAL;APEX STANDARD Annual 1-Year Subscription for AWS Cloud | 1 | |
| APEX-STD-AWS-PERPETUAL | APEX-STD-AWS-PERPETUAL;APEX STANDARD Perpetual Subscription for AWS Cloud | 1 | |
| APEX-STD-GCP-3YEAR | APEX-STD-GCP-3YEAR;APEX STANDARD Annual 3-year Subscription for Google Cloud | 1 | |
| APEX-STD-GCP-ANNUAL | APEX-STD-GCP-ANNUAL;APEX STANDARD Annual 1-year Subscription for Google Cloud | 1 | |
| APEX-STD-GCP-PERPETUAL | APEX-STD-GCP-PERPETUAL;APEX STANDARD Perpetual Subscription for Google Cloud | 1 | |
| APEX-STD-LIC-3YEAR | APEX-STD-LIC-3YEAR;APEX STANDARD Annual 3-year Subscription for Private Cloud | 1 | |
| APEX-STD-LIC-ANNUAL | APEX-STD-LIC-ANNUAL;APEX STANDARD Annual 1-year Subscription for Private Cloud | 1 | |
| APEX-STD-LIC-PERPETUAL | APEX-STD-LIC-PERPETUAL;APEX STANDARD Perpetual Subscription for Private Cloud | 1 | |
| APEX-STD-MACS-3YEAR | APEX-STD-MACS-3YEAR;APEX STANDARD Annual 3-year Subscription for Azure Cloud | 1 | |
| APEX-STD-MACS-ANNUAL | APEX-STD-MACS-ANNUAL;APEX STANDARD Annual 1-year Subscription for Azure Cloud | 1 | |
| APEX-STD-MACS-PERPETUAL | APEX-STD-MACS-PERPETUAL;APEX STANDARD Perpetual Subscription for Azure Cloud | 1 | |
| APM452ID-A | WINCH STRAP WITH HOOK (STANDARD LENGTH158 ”) | 1 | |
| AR000200 | SR1-MF STANDARD HAND-ROTOR, 10 KHZ - 500 KHZ | 1 | |
| ARD-1025/375 | STANDARD REFERENCE : NDT3322A | 1 | |
| ARINC 615 | STANDARD PORTABLE DATA LOADER | 1 | |
| ARP-.385/.720 | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-5KHz.385"Ø ID .720"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. FOR REFERENCE STANDARD APB-3302. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.75-1.25/300Hz | REFLECTION RING PROBE, 1.25"OD .75" ID(19.6mm) TRIAX FISHER CONNECTOR 300HZ-1KHZ. REFERENCE STANDARD NDT3176-X 737 PT 6 57-10-59, 737 PART 6 57-10-53 NDT3168. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.85/1.40-200HZ | LOW FREQUENCY REFLECTION RING PROBE .85" I.D. 1.40" O.D. TRIAX CONNECTOR 100HZ-500HZ. REFERENCE STANDARD NDT3176-X 737 PT 6 57-10-59. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| ARP-.85/1.40-200Hz | LOW FREQUENCY REFLECTION RING PROBE .85" I.D. 1.40" O.D. TRIAX CONNECTOR 100Hz-500Hz. REFERENCE STANDARD NDT3176-X 737 PT 6 57-10-59. Includes test report and Certificate of Conformance. | 1 | |
| ARP-1.25-.75-300H | REFLECTION RING PROBE TRIAX FISHER CONNECTOR, 1.25"OD .75" ID(19.6mm) 300HZ-1KHZ. 737 PART 6 57-10-53, pg.2, USED WITH REFERENCE STANDARD NDT3168 AND NDT3176-X. Includes test report and Certificate of Conformance... | 1 | |
| ARP-1.40/.85-200Hz | LOW FREQUENCY REFLECTION RING PROBE .85" I.D. 1.40" O.D. TRIAX FISCHER CONNECTOR 100Hz-500Hz. REFERENCE STANDARD NDT3176-X 737 PT 6 57-10-59. Includes test report and Certificate of Conformance. | 1 | |
| ARP-1_25-_75-300H | REFLECTION RING PROBE TRIAX FISHER CONNECTOR, 1.25"OD .75" ID(19.6MM) 300HZ-1KHZ. 737 PART 6 57-10-53, PG.2, USED WITH REFERENCE STANDARD NDT3168 AND NDT3176-X. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE... | 1 | |
| ARS-0812S | Surface reference standard, 17-4PH Steel, with EDM notch depths of 0.008", 0.010" and 0.020" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 inc | 1 | |
| ARS-0824-7050 | Surface reference standard, 7050-T7 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX | 1 | |
| ARS-0824-7050T74 | Surface reference standard, 7050-T74 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX | 1 | |
| ARS-0824-7075T6 | Surface reference standard, 7075-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| ARS-0824-7075T7 | Surface reference standard, 7075-T7 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824-7075T73 | Surface reference standard, 7075-T73 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| ARS-0824/2024-T3 | Surface reference standard, 2024-T3 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824/2024-T6 | Surface reference standard, 2024-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| ARS-0824/2024T6 | Surface reference standard, 2024-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| ARS-0824/4330 | Surface reference standard, 4330 Steel, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 inches | 1 | |
| ARS-0824/6061T6 | Surface reference standard, 6061-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824/7475-T7 | Surface reference standard, 7475-T7 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824A | Surface reference standard, 7075-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824I | Surface reference standard, Inconel 718, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX | 1 | |
| ARS-0824M | Surface reference standard, Magnesium, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX | 1 | |
| ARS-0824S | Surface reference standard, 4340 Steel, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 inc... | 1 | |
| ARS-0824SS | Surface reference standard, 304 Stainless steel, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM NOTCHES .005" W +/-.001" | 1 | |
| ARS-0824SS/316 | Surface reference standard, 316 Stainless steel, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM NOTCHES .005" W +/-.001" | 1 | |
| ARS-0824T | Surface reference standard, 6AL-4v Titanium, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.2... | 1 | |
| ARS-1012HCS | 12 HOLE REFERENCE STANDARD 4130 OR 4340 CARBON STEEL WITH 0.020" x 0.020" and 0.030" x 0.030" CORNER EDM NOTCH. HOLE SIZES: 1/8, 5/32, 3/16, 13/64, 7/32, 5/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64. Includes Test Report and Certificate of Conformance. | 1 | |
| ARS-1012HSA | 12 HOLE REFERENCE STANDARD 7075-T6 WITH 0.020" x 0.020" and 0.030" x 0.030" CORNER EDM NOTCH. HOLE SIZES: 1/8, 5/32, 3/16, 13/64, 7/32, 5/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64. Includes Test Report and Certificate of Conformance. | 1 | |
| ARS-1S | Surface reference standard, 4340 or 4130 steel, with EDM notch depth of 0.010" x .005" wide Reference standard overall dImensions 1.0" X 3.0" X 0.25" inches .007" W MAX. Includes Certification traceable to NIST. | 1 | |
| ARTEX 8807 | ARTEX FTP (FIELD PROGRAMMING TABLET) STANDARD KIT | 1 | |
| ASDP-.25/2-200K | STANDARD REFLECTION SPOT PROBE. 0.25 IN. (6.3MM). 2-200KHz SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.25/7L | DETACHABLE STANDARD REFLECTION SPOT PROBE. 0.25 IN. (6.3MM) DIAMETER. 5kHZ-100KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.25/7L/2-200K | STANDARD REFLECTION SPOT PROBE. 0.25 IN. (6.3MM). 2kZ-200KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.25/L16-1-100K | STANDARD SIDE MOUNT REFLECTION SPOT PROBE WITH A 16 PIN LEMO 6.O FT ATTACHED. 0.25 IN. (6.3MM). 1Khz100KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.25/TF/1-100K | STANDARD SIDE MOUNT REFLECTION SPOT PROBE. 0.25 IN. (6.3MM). 1Kz-100KHz. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.31/7L | STANDARD REFLECTION SPOT PROBE. 0.31 IN. (7.9MM) DIAMETER. 700HZ-80KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.31/TF | STANDARD REFLECTION SPOT PROBE(STRAIGHT). 0.31"Ø (7.9MM) DIAMETER. 1KHz-50KHz. SUPPLIED WITH A TRIAX FISCHER / LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.44/7L | STANDARD REFLECTION SPOT PROBE. 0.44 IN. (11.2MM) DIAMETER. 400HZ-60KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.45/1KHZ | SURFACE SPOT PROBE, STANDARD BRIDGE .45"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 1KHZ -5KHZ. Includes Test Report and Certificate of conformance. | 1 | |
| ASDP-.5/400HZ-30K | SURFACE SPOT PROBE, STANDARD BRIDGE .500"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 400Hz-30KHz. Includes Test Report and Certificate of conformance. 9213548 | 1 | |
| ASDP-.5/7L | STANDARD REFLECTION SPOT PROBE. 0.50 IN. (12.7MM) DIAMETER. 300HZ-40KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.55/500HZ | SURFACE SPOT PROBE, STANDARD BRIDGE .55"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 500Hz-5KHz. Includes Test Report and Certificate of conformance. | 1 | |
| ASDP-.620 | SURFACE PROBE STANDARD BRIDGE .620" DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 300Hz-10KHz. Includes Test Report and Certificate of conformance. Olympus P/N: 9213011 | 1 | |
| ASDP-1.0/300HZ | SURFACE SPOT PROBE, STANDARD BRIDGE 1.0"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 300HZ. Includes Test Report and Certificate of conformance. | 1 | |
| ASRS-123A | REFERENCE STANDARD ALUMINUM .008, .010, .040 | 1 | |
| ASTM D7215-16 RED | STANDARD TEST METHOD FOR CALCULATED FLASH POINT SIMULATED DISTILLATION ANALYSIS OF DISTILLATE FUELS (STANDARD + REDLINE PDF BUNDLE) | 1 | |
| ASTM F 428-7 | GLASS SCRATCH VISUAL COMPARISON STANDARD SET / PLATES | 1 | |
| AT-3132 | REFLECTOR TO FIT STANDARD APERTURE WITH CLAMPS (RAYCHEM) | 2 | |
| AT553WNX | CLECOS COM BORBOLETA MANUAL STANDARD 5/32 | 1 | |
| AT554WNX | CLECOS COM BORBOLETA MANUAL STANDARD 3/16 | 1 | |
| AT555WNX | CLECOS COM BORBOLETA MANUAL STANDARD 1/4 | 1 | |
| ATI443S1 | MICROSTOP STANDARD TYPE | 1 | |
| ATI501R | RIVET CUTTER - 3/32ʺ-1/4ʺ - STANDARD HANDLES | 3 | |
| ATI5513WNX | CLECOS COM BORBOLETA MANUAL STANDARD 5/32 | 1 | |
| ATI552M | STANDARD CLECO 1/8 | 1 | |
| ATI554WNX | CLECOS COM BORBOLETA MANUAL STANDARD 3/16 | 2 | |
| ATR42-57-0038 | ALUMINUUM STANDARD REF BLOCK 1,2&3 | 1 | |
| ATR42V100A | ATR 42&72 DIGITAL AIR/HYDRAULIC TOOL KIT (Standard MILH5606) | 5 | |
| ATS 120A | STANDARD RIVET SET MIX | 1 | |
| AURFBSE-5.5M/40MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 40mm(1.57") WORKING LENGTH 100KHZ-2MHZ. EXPANDABLE PROBE HEAD DIAMETER= 5.5mm(0.2165Ø - APPROXIMATELY 6.91mmØ 0.272"Ø. Includes Test Report and C... | 1 | |
| AURFBSE-6.0M/51MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 51mm(2.0") WORKING LENGTH 100KHz-2MHz. EXPANDABLE PROBE HEAD DIAMETER= 8.0mm(0.236"Ø) - 10.0mmØ(.315"Ø). Includes Test Report and Certificate of Con | 1 | |
| AURFBSE-8.0M/51MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 51mm(2.0") WORKING LENGTH 100KHz-2MHz. EXPANDABLE PROBE HEAD DIAMETER= 8.0mm(0.315"Ø) - 10.0mmØ(.394"Ø). Includes Test Report and Certificate of Con | 1 | |
| AW1020DK | WRENCH SET, AW1020DK, 20/PC, TOOLS, HAND, TYPE, TOOL WRENCH SET, TYPE HEXAGONAL, STANDARD SAE | 3 | |
| AW3D | STANDARD HEX L WRENCH 3/32X | 1 | |
| AWEF9K | SET OF STANDARD HEXAGON | 3 | |
| AZL01980-R00 | STANDARD AVIONICS HANGAR TOOLBOX | 1 | |
| AZL02623-R00 | STANDARD BOLT FOR PN A32266 WITH A THREAD EDM NOTCH | 1 | |
| AZL02626-R00 | STANDARD BOLT FOR PN A35219 WITH SHANK EDM NOTCH | 1 | |
| AZL02629-R00 | STANDARD BOLT FOR PN MS21250-09038 WITH A THREAD EDM NOTCH | 1 | |
| AZL02636-R00 | STANDARD BOLT FOR PN 43-1374 WITH SHANK EDM NOTCH | 1 | |
| B-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| B-2R | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| B-2TM | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| B-300 | TRACTOR - TOW - 25,000 LB DPB - PERKINS T4.236 STANDARD DIESEL ENGINE | 1 | |
| B-500 | TRACTOR - TOW - 40,000 LB DBP - DETROIT DIESEL - STANDARD ENGINE | 1 | |
| B105-000 | BUBBLE COVER, STANDARD MODEL | 1 | |
| B105-005 | BUBBLE COVER, STANDARD MODEL (with Wire Strike) | 1 | |
| B105-800 | TRAVEL COVER, Light Weight Travel Bubble Cover, STANDARD MODEL | 1 | |
| B105-810 | TRAVEL COVER, Light Weight Travel Bubble Cover, STANDARD MODEL (with Wire Strike) | 1 | |
| B18-120 | PROPELLOR/SPINNER COVERS, 2 blade Hamilton-Standard (set of 2) | 1 | |
| B18-121 | INSULATED PROPELLOR/SPINNER COVERS, 2 blade Hamilton-Standard (set of 2) | 1 | |
| B47-300 | ROTOR HUB COVER (standard type) | 1 | |
| B60-107 | EXHAUST PLUGS, standard engine (set of 2) | 1 | |
| BA CRS EXBC670-59046 | REFERENCE STANDARD UT | 1 | |
| BACB30US10K47 | STANDARD BOLT | 1 | |
| BACC14AD-04 | ASSEMBLY - CAP, PRESSURE SEAL, FLARELESS TUBE (STANDARD MS9513-04 OR BACC14AD-04) | 1 | |
| BACRS EX605-60037-001 | REFERENCE STANDARD UT | 1 | |
| BACRS EXBC670-59046 | REFERENCE STANDARD UT | 1 | |
| BAHCO317 | BAHCO Standard Duty Hack Saw | 1 | |
| BAT-VDG17 | V-DrillGuide® - Drill Straight - Every Time! Standard Model - 17 Fractional Sizes | 1 | |
| BAT3518-A | Nutplate Jig - Double Wing - Standard Spacing - #6 Screw - MADE IN THE USA! | 1 | |
| BAT3518-B | Nutplate Jig - Double Wing - Standard Spacing - #8 Screw - MADE IN THE USA! | 1 | |
| BAT3518-C | Nutplate Jig - Double Wing - Standard Spacing - #10 Screw - MADE IN THE USA! | 1 | |
| BAT3518-D | Nutplate Jig - Double Wing - Standard Spacing - 1/4" Screw - MADE IN THE USA! | 1 | |
| BAT3518-G | Nutplate Jig - Single Wing - Standard Spacing - #6 Screw | 1 | |
| BAT3518-H | Nutplate Jig - Single Wing - Standard Spacing - #8 Screw | 1 | |
| BAT3518-J | Nutplate Jig - Single Wing - Standard Spacing - #10 Screw | 1 | |
| BAT3518-K | Nutplate Jig - Single Wing - Standard Spacing - 1/4" Screw | 1 | |
| BB73-482 | RVSM STANDARD TOOL CASE | 1 | |
| BCM-74-4 | CABLE. STANDARD BNC TO MICRODOT. 4'. RG-174 | 1 | |
| BH7545-T7351 | STANDARD CALIBRATION | 1 | |
| BHCB-AL | EDDY CURRENT STANDARD | 1 | |
| BHCB-AL1 | EDDY CURRENT STANDARD | 1 | |
| BHS13A | Set, Wrench, L-Shape, Ball Hex, Standard (13 pcs.) (0.050" to 3/8') | 3 | |
| BHS6061-T6/C2 | Bombardier Bolt hole and surface crack reference standard 6061-T6, 15 Holes, .030 Midwall notches top plate, (2) .030 corner notches each hole on the bottom plate. .008, .020, .030 surface notches | 1 | |
| BLC4RC25S | PIN, QUICK RELEASE, STANDARD R HANDLE, SINGLE ACTING, WITHOUT LANYARD & TAB. | 1 | |
| BLC6BC66S | PIN, QUICK RELEASE, STANDARD B HANDLE, SINGLE ACTING, WITHOUT LANYARD & TAB. | 1 | |
| BLP7 | PLIERS, LOCKING, STANDARD GR | 2 | |
| BLP7A | PLIERS, LOCKING, STANDARD GR | 1 | |
| BLPBB1215 | BREAKER BAR, 1/2"DRIVE 15" STANDARD HANDLE (BLUE POINT) | 1 | |
| BLPBB3810 | BREAKER BAR HANDLE,STANDARD HANDLE,3/8” DRIVE, LENGTH 10” | 2 | |
| BLPT1415 | 1/4 DRIVE TORX T15 STANDARD BIT SOCKET BLUE-POINT | 1 | |
| BM-KIT-MIA | BONDMASTER PROBE AND STANDARD KIT FOR MIA INSPECTIONS | 1 | |
| BM-KIT-PC2 | BONDMASTER PROBE AND STANDARD KIT FOR PITCH-CATCH INSPECTIONS | 1 | |
| BM-KIT-RES-A | BONDMASTER PROBE AND STANDARD KIT FOR RESONANCE INSPECTIONS | 1 | |
| BM-KIT-RES-C | BONDMASTER PROBE AND STANDARD KIT FOR RESONANCE INSPECTIONS | 1 | |
| BOER708 | RATCHET COMBINATION WRENCH SET, STANDARD LENGTH,8PCS,SIZE 5/16”-3/4” | 2 | |
| BPK-01 | Standard Probe Kit. Type: BPK-01 | 1 | |
| BPRTR936 | DRIVE STANDARD HANDLE QUICK-RELEASE RATCHET 1/4 | 2 | |
| BPS7 | BLUEPOINT STANDARD PLIERS SET | 1 | |
| BPS7A | STANDARD PLIER SET | 1 | |
| BREAK BAR - 3/8" STANDARD HANDLE | BREAK BAR - 3/8" STANDARD HANDLE | 1 | |
| BREAK BAR 1/4" STANDARD HANDLE | BREAK BAR 1/4" STANDARD HANDLE | 1 | |
| BRSTAND | PORTABLE STANDARD CYLINDER SHARPENER (SUNNEN) RANGE: 2.5"-7" | 1 | |
| BSGDMR6 | "6-BIT RATCHETING STANDARD SCREWDRIVER (BLUE-POINT®) SCREWDRIVER (BLUE-POINT®) | 1 | |
| BST2960-1 | STANDARD TOOLS CLINOMITER | 1 | |
| BUNDO | STANDARD WEIGHT SET 1 GRAM - 10 KGRAM (17 EA) | 1 | |
| C-130-OW-016 | CALIBRATION STANDARD BLOCK | 2 | |
| C-130-WR | C-130 Outer Wing Rainbow Fitting Bolt Hole Standard C-130, 2 Layers, 3 HOLES, 3/4", 7/8" and 1.0" with .004" X .030" X .030" EDM Notches in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| C-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 4 | |
| C-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| C-2M | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 2 | |
| C-2MHD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| C-2ML | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| C12-DEL-3C1N | REPAIR REFERENCE STANDARD GR/EP LAMINATE STEP DELAM DEFECT. ALL BOEING AIRCRAFT MODELS PART 1 51-01-01. Includes C-SCAN Certification and Certificate of Conformance... | 3 | |
| C12-DEL-3C1N | STANDARD SAMPLE REPAIR | 3 | |
| C12-DIS-3C1N | REPAIR REFERENCE STANDARD GR/EP LAMINATE STEP DISBOND and CORE LAMINATE INTERFACE. ALL BOEING AIRCRAFT MODELS PART 1 51-01-01. Includes C-SCAN Certification and Certificate of Conformance. | 3 | |
| C12-DIS-3C1N | STANDARD SAMPLE REPAIR | 3 | |
| C12-PCS-3C1N | REPAIR REFERENCE STANDARD GR/EP LAMINATE STEP POTTED HOLE and SPLICE CORE DEFECT. ALL BOEING AIRCRAFT MODELS PART 1 51-01-01. Includes C-SCAN Certification and Certificate of Conformance... | 3 | |
| C12-PCS-3C1N | STANDARD SAMPLE REPAIR | 3 | |
| C12-POT-3C1N | REPAIR REFERENCE STANDARD GR/EP LAMINATE STEP POTTED CORE and CORE DEFECT. ALL BOEING AIRCRAFT MODELS PART 1 51-01-01. Includes C-SCAN Certification and Certificate of Conformance... | 3 | |
| C12-POT-3C1N | STANDARD SAMPLE REPAIR | 3 | |
| C130-300 | CENTER CONSOLE COVER (standard color: Black), NSN: 1680-01-592-8492 | 1 | |
| C130-305 | CENTER CONSOLE COVER (J Models, standard color: Black), NSN 1680-01-590-9530 | 1 | |
| C130-900 | FLIGHT DECK HEATSHIELD SET (standard models), NSN: 1680-66-164-1476 (set of 13) | 1 | |
| C130-CWOW-019 | LOCKHEED C-130 CALIBRATION STANDARD LOWER SURFACE PANEL. MATERIAL: 7075-T6 ALUMINUM | 1 | |
| C130-OW-016 | LOCKHEED C-130 CALIBRATION STANDARD FIGURE 9-4 No.1 and No. 4 Truss Mount Upper Lugs. Material: 7075-T6 Aluminum Sulfuric Acid Anodized Per MIL-A-8625 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| C130-OW016 | LOCKHEED C-130 CALIBRATION STANDARD FIGURE 9-4 NO.1 AND NO. 4 TRUSS MOUNT UPPER LUGS. MATERIAL: 7075-T6 ALUMINUM SULFURIC ACID ANODIZED PER MIL-A-8625EQUIVALENT. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| C32036-5 | CLAMP STANDARD ASSY | 5 | |
| C49003-1 | CRADLE, SUND STANDARD AUXILIARY POWER UNIT | 16 | |
| C500-300 | WING COVERS (Standard model) (set of 2) | 1 | |
| C7091/10.6MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 10.6mm hole standard 6AL-4V Ti | 1 | |
| CA12-1508A | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 7075-T7 ALUMINUM, 54-10-11 PAGE 634A FIG.603 SHEET 21B | 1 | |
| CA12-1683A | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 STEEL, 54-10-11 PAGE 632C FIG.603 SHEET 20C | 1 | |
| CA235-235502 | AIRBUS MILITARY REFERENCE STANDARD 53-30-10 FIG 505, PAGE 508. | 1 | |
| CA71 | STANDARD ACCESSORIES | 3 | |
| CAM-100-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-101-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-102-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-103-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-110-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-111-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-20-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-21-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-22-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-23-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-30-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-31-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-32-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-33-1-30-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-40-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-41-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-42-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-43-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-50-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-51-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-52-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-53-1-40-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-60-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-61-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-62-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-63-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-70-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-71-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-72-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-73-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-80-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-81-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-82-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-83-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-90-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-91-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-92-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAM-93-2-60-V2 | Mandrel - Standard CA Tooling | 1 | |
| CAR-102-1-XXXX | Gage Finish Reamer - Standard CA Tooling | 1 | |
| CAR-111-1-XXXX | Gage Finish Reamer - Standard CA Tooling | 1 | |
| CAR-70-1-*XXXX | Gage Finish Reamer - Standard CA Tooling | 1 | |
| CASE-10064-X600 | STANDARD RUGGED TRANSPORT CASE FOR THE 600 SERIES FLAW DETECTORS | 1 | |
| CAX0201 | 1/2HP STANDARD BENCH GRINDER | 1 | |
| CBCE-14A-04 23F | STANDARD NOSECAP ASSY | 1 | |
| CBCE-14A-0401F | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-14A-0423F | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-14A-0423F OR | STANDARD NOSECAP | 1 | |
| CBCE-14A-0601F | STANDARD NOSECAP | 1 | |
| CBCE-14A-0623F | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-14A-0801F | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-14A-0823F | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-14A-1023F | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-14B-0823F | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-14B-1001F | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-14C-1223F | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-14C-1623-F | STANDARD NOSECAP ASEMBLY | 1 | |
| CBCE-26D-18-2-NF | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBCE-26E-26-3-NF | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBG-18-0-N-1 | DIMENSIONAL INSPECTION GAUGE, MADE OF STANDARD METAL, USED DURING AIRCRAFT REPAIRS. | 3 | |
| CBG-18-1-N-1 | DIMENSIONAL INSPECTION GAUGE, MADE OF STANDARD METAL, USED DURING AIRCRAFT REPAIRS. | 2 | |
| CBG-4-1-N-1 | COMBINATION GAGE FOR STANDARD TOOL DIAMETER NUMBER (STDN) 4-1-N | 1 | |
| CBL-615 | STANDARD ARINC 615 DATA LOADER INTERFACE CABLE | 1 | |
| CBL-PDL-615 | STANDARD 10-FOOT ARINC 615 CABLE | 1 | |
| CBM-18-0-N-2-60-V1 | Mandrel - Standard CB Tooling | 3 | |
| CBM-18-1-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-18-2-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-18-3-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-20-0-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-20-1-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-20-2-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-20-3-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-22-0-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-22-1-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-22-2-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-22-3-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-24-0-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-24-1-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-24-2-N-2-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-24-3-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-26-0-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-26-1-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-26-2-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-26-3-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-28-0-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-28-1-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-28-2-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-28-3-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-30-0-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-30-1-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-30-2-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBM-30-3-N-5-60-V1 | Mandrel - Standard CB Tooling | 1 | |
| CBMG-4-1-N | MANDREL GAGE FOR STANDARD TOOL DIAMETER NUMBER (STDN) 4-1-N | 1 | |
| CBR-26-3-N-1-.8291 | STANDARD NOSECAP ASSEMBLY | 1 | |
| CBSD-12-3-N-1 | STANDARD TOOL DIAMETER NUMBER | 2 | |
| CBSD-4-1-N-1 | STARTING DRILL FOR STANDARD TOOL DIAMETER NUMBER (STDN) 4-1-N | 1 | |
| CBSR-4-1-N-1 | STARTING REAMER FOR STANDARD TOOL DIAMETER NUMBER (STDN) 4-1-N | 1 | |
| CC01 | Standard Duty Countersink Cage / Microstop | 1 | |
| CC01-USA | STANDARD DUTY COUNTERSINK CAGE / MICROSTOP 5/8" CUTTER CAPACITY. RATED FOR 3,000 RPM USE | 2 | |
| CC317 | Starrett 234A-1 STANDARD W/HANDLE | 1 | |
| CC322 | Starrett 234A-2 STANDARD W/HANDLE | 1 | |
| CC327 | Starrett 234A-3 STANDARD W/HANDLE | 1 | |
| CC332 | Starrett 234A-4 STANDARD W/HANDLE | 1 | |
| CC337 | Starrett 234A-5 STANDARD W/HANDLE | 1 | |
| CC342 | Starrett 234A-6 STANDARD W/HANDLE | 1 | |
| CC347 | Starrett 234A-7 STANDARD W/HANDLE | 1 | |
| CC352 | Starrett 234A-8 STANDARD W/HANDLE | 1 | |
| CC357 | Starrett 234A-9 STANDARD W/HANDLE | 1 | |
| CC362 | Starrett 234A-10 STANDARD W/HANDLE | 1 | |
| CC367 | Starrett 234A-11 STANDARD W/HANDLE | 1 | |
| CC372 | Starrett 234A-12 STANDARD W/HANDLE | 1 | |
| CC377 | Starrett 234A-13 STANDARD W/HANDLE | 1 | |
| CC382 | Starrett 234A-14 STANDARD W/HANDLE | 1 | |
| CC387 | Starrett 234A-15 STANDARD W/HANDLE | 1 | |
| CC392 | Starrett 234A-16 STANDARD W/HANDLE | 1 | |
| CC397 | Starrett 234A-17 STANDARD W/HANDLE | 1 | |
| CC402 | Starrett 234A-18 STANDARD W/HANDLE | 1 | |
| CC407 | Starrett 234A-19 STANDARD W/HANDLE | 1 | |
| CC412 | Starrett 234A-20 STANDARD W/HANDLE | 1 | |
| CC417 | Starrett 234A-21 STANDARD W/HANDLE | 1 | |
| CC422 | Starrett 234A-22 STANDARD W/HANDLE | 1 | |
| CC427 | Starrett 234A-23 STANDARD W/HANDLE | 1 | |
| CC432 | Starrett 234A-24 STANDARD W/HANDLE | 1 | |
| CC437 | Starrett 234MA-25 STANDARD W/HANDLE | 1 | |
| CC442 | Starrett 234MA-50 STANDARD W/HANDLE | 1 | |
| CC447 | Starrett 234MA-75 STANDARD W/HANDLE | 1 | |
| CC452 | Starrett 234MA-100 STANDARD W/HANDLE | 1 | |
| CC457 | Starrett 234MA-125 STANDARD W/HANDLE | 1 | |
| CC462 | Starrett 234MA-150 STANDARD W/HANDLE | 1 | |
| CC467 | Starrett 234MA-175 STANDARD W/HANDLE | 1 | |
| CC472 | Starrett 234MA-200 STANDARD W/HANDLE | 1 | |
| CC477 | Starrett 234MA-225 STANDARD W/HANDLE | 1 | |
| CC482 | Starrett 234MA-250 STANDARD W/HANDLE | 1 | |
| CC487 | Starrett 234MA-275 STANDARD W/HANDLE | 1 | |
| CC492 | Starrett 234MA-300 STANDARD W/HANDLE | 1 | |
| CC497 | Starrett 234MA-325 STANDARD W/HANDLE | 1 | |
| CC502 | Starrett 234MA-350 STANDARD W/HANDLE | 1 | |
| CC507 | Starrett 234MA-375 STANDARD W/HANDLE | 1 | |
| CC512 | Starrett 234MA-400 STANDARD W/HANDLE | 1 | |
| CC517 | Starrett 234MA-425 STANDARD W/HANDLE | 1 | |
| CC522 | Starrett 234MA-450 STANDARD W/HANDLE | 1 | |
| CC527 | Starrett 234MA-475 STANDARD W/HANDLE | 1 | |
| CC532 | Starrett 234MA-500 STANDARD W/HANDLE | 1 | |
| CC537 | Starrett 234MA-525 STANDARD W/HANDLE | 1 | |
| CC542 | Starrett 234MA-550 STANDARD W/HANDLE | 1 | |
| CC547 | Starrett 234MA-575 STANDARD W/HANDLE | 1 | |
| CC552 | Starrett 234MA-600 STANDARD W/HANDLE | 1 | |
| CE9900085-101 | CALIBRATION REFERENCE STANDARD (CRS) | 1 | |
| CE9900086-101 | CALIBRATION REFERENCE STANDARD (CRS) | 1 | |
| CE9900088-001 | CALIBRATION REFERENCE STANDARD (CRS) | 1 | |
| CE9900088-003 | CALIBRATION REFERENCE STANDARD (CRS) | 1 | |
| CE9900088-005 | CALIBRATION REFERENCE STANDARD (CRS) | 1 | |
| CE9900088-007 | CALIBRATION REFERENCE STANDARD (CRS) | 1 | |
| CE9900088-009 | CALIBRATION REFERENCE STANDARD (CRS) | 1 | |
| CESSNA 17-7PH .050 | Cessna Standard 17-7 PH .050" thick 2.5" x 2.5" | 1 | |
| CFL10 | CYLINDER HONE STANDARD 3 TO 4-1/4 | 1 | |
| CG2-000 | BUBBLE COVER (STANDARD MODEL) | 1 | |
| CH-410 | STANDARD BORE | 1 | |
| CH77-000 | BUBBLE COVER (STANDARD MODEL) | 1 | |
| CHRS-1-3 | Composite Standard Boeing 767 PT1 51-01-01 PG14 R&D | 1 | |
| CHRS-1-6 | Composite Standard Boeing 767 PT1 51-01-01 PG14 R&D | 1 | |
| CHRS-2-9 | REFERENCE STANDARD CARBON | 1 | |
| CLAA99-14CRG | 4-BAY BATTERY CHARGER FOR 9900/9100 SYSTEM BATTERIES. THE 4-BAY BATTERY CHARGER (CLAA99-14CRG) REQUIRES A STANDARD 110V CORD WITH A THREE-PRONG PLUG FOR CHARGING | 1 | |
| CM-ET-S-AL2014A-T6 | CONDUCTIVITY STANDARD ALLUMINIUM | 1 | |
| CM-ET-S-AL5083 | CONDUCTIVITY STANDARD ALLUMINIUM | 1 | |
| CM-ET-S-AL6082-T6 | CONDUCTIVITY STANDARD ALLUMINIUM | 1 | |
| CM-ET-S-BRS | CONDUCTIVITY STANDARD ALLUMINIUM | 1 | |
| CMMT44778 | CRAFTSMAN® STANDARD (SAE) OPEN END IGNITION WRENCH SET (8-PIECE) CMMT44778 | 1 | |
| CMS-787 | KIT - CRIMP TOOL, 787 REF FOUND IN STANDARD WIRE PRACTICES MANUAL (SWPM). | 2 | |
| CN1020A12G12SN-200 | STANDARD CIRCULAR CONNECTOR | 1 | |
| COUPON 25 | PEMCO LOW FREQUENCY EDDY CURRENT STANDARD FOR INSPECTION UJ-1. 05-30-10 PAGE 194. EDM NOTCH: .030 MAX WIDTH x .240" LONG. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON NO. 12 | PEMCO Standard 05-30-10 Pg 192 | 1 | |
| COUPON NO. 2 | PEMCO Standard 05-30-10 Pg 189 | 1 | |
| COUPON NO. 25 | PEMCO Standard 05-30-10 Pg 182 | 1 | |
| COUPON NO. 29 | PEMCO Standard 05-30-10 Pg 194 | 1 | |
| COUPON NO. 3 | PEMCO Standard 05-30-10 Pg 190 | 1 | |
| COUPON NO. 31 | PEMCO Standard 05-30-10 Pg 184 | 1 | |
| COUPON NO. 6 | PEMCO Standard 05-30-10 Pg 180 | 1 | |
| CP4444RURAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) | 2 | |
| CP4444RUSAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 3 | |
| CP4444RUTAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 4 | |
| CP4447RUSAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4447RUTAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4447RUVAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4450-2 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4450-3 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 2 | |
| CP4450-4 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 4 | |
| CP4475-3 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4475-4 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4475-6 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CREF3-172959 | CONDUCTIVITY STANDARD 17.2 - 29.3 - 59.9 | 1 | |
| CREF3-294259 | CONDUCTIVITY STANDARD 43 IACS | 1 | |
| CREF5- 04174559100 | CERTIFIED CONDUCTIVITY REFERENCE STANDARD SET OF 5. INCLUDES VALUES OF 4.6% IACS ( /- 0.6%), 17.2% IACS ( /- 1.5%), 45.7% IACS ( /- 4%), 59.9% IACS ( /- 6%) AND 100% IACS ( /- 10%). SET INCLUDES PLASTIC HOLDER. | 1 | |
| CREF5-01293242100 | CONDUCTIVITY STANDARD SET | 1 | |
| CRFG-R30-1-XXXX/YYYY | Final Hole Gage - Standard CR Tooling | 1 | |
| CRM-R30-1-30-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R32-1-30-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R40-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R42-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R50-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R52-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R60-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| CRM-R62-1-40-V1 | Mandrel - Standard CR Tooling | 1 | |
| CSCASEINCL | CSCASEINCL;Standard Soft Case for TB6000A with MSAM | 1 | |
| CTS DHC29445-001 | CALIBRATION TEST STANDARD (CTS), | 1 | |
| CW-23 OW-47 | C-130 CALIBRATION STANDARD. MATERIAL:7075-T7 or Equivalent Aluminum. FASTENER (NAS517-3-2) 2 Places. Includes Test Report and Certificate of Conformance For Standard and Certification for material and Fasteners. | 1 | |
| CW-23/OW-47 | C130J Calibration Standard 57-10-09 Pg 7-93 Fg 7-9 | 1 | |
| CW-23OW-47 | C130 CALIBRATION STANDARD 57-10-09 | 1 | |
| CX100-R-SILVER | CX100-R-SILVER;1yr. Renewal Standard Full Maintenance Contract CX100 Existing Equipment | 1 | |
| CX300-R-SILVER | CX300-R-SILVER;1yr. Renewal Standard Full Maintenance Contract CX300 Existing Equipment | 1 | |
| D01068-002 | OW HYDRAULIC LIFT D01068-002+ 16A CEE, STANDARD 30 M; COLOR RAL 6018 YELLOW-GREEN, HYDRO | 1 | |
| D02016-002 | WING HYDRAULIC LIFT D02016-002 + 16A CEE, STANDARD 30 M: RAL 6018 YELLOW-GREEN, HYDRO | 1 | |
| D02540K2D1E01B0 | HYDRO Standard B787 Nose Tripod Jack | 2 | |
| D04020K3D1E01B0 | HYDRO Standard B787 Tail Tripod Jack | 2 | |
| D08504K3D1E01B0 | HYDRO Standard A330 /A340-200/-300 Wing Tripod Jack | 2 | |
| D08505K3D1E01B0 | HYDRO Standard B787 Wing Tripod Jack | 2 | |
| D26411 | STANDARD HEAT GUN 220V 1800W | 1 | |
| D500A372 | STANDARD TOOL, GAUGE | 1 | |
| DAC ETBS AL-1T 2024-T3 0.063 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5, 06-10-02.005. MATERIAL: 2024-T3 ALUMINUM 0.063". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETBS AL-1T/ 0.032 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 7075-T7 ALUMINUM .032". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETBS AL-1T/ 0.071 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 2024-T3 ALUMINUM .071". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETBS AL-1T/ 0.090 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 7075-T6 ALUMINUM .090". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETBS AL-1T/0.080 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 2024-T3 ALUMINUM .080". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH AL | 7075-T6 Aluminum Multi-purpose Reference Standard 1/8" to 3/4" holes similar to RH120 | 1 | |
| DAC ETOH FE | 4340 Multi-purpose Reference Standard 1/8" to 3/4" holes similar to RH120 | 1 | |
| DAC ETOH TI | 6AL-4V Multi-purpose Reference Standard 1/8" to 3/4" holes similar to RH120 | 1 | |
| DAC ETOH-AL-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC GSET AL.01-N1-N2 | General Surface Aluminum HFET Reference Standard MD-11 section 2-1 page 1 figure 1.1 | 1 | |
| DAC GSET Ti.01-N1-N2 | General Surface Titanium HFET Reference Standard MD-11 section 2-1 page 1 figure 1.2 | 1 | |
| DAC GSET-AL | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 7075-T6 | 1 | |
| DAC GSET-AL.01 | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 FIG.1 SHEETS 1-3. MATERIAL: 7075-T6 ALUMINUM PER QQ-Q-250/12. | 1 | |
| DAC GSET-FE | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 4340 | 1 | |
| DAC GSET-FE.01 | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 FIG.1 SHEETS 1-3. MATERIAL: 4340 STEEL PER MIL-S-5000 | 1 | |
| DAC GSET-MG | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 ALUMINUM BRONZE | 1 | |
| DAC GSET-SS.01 | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 FIG.1 SHEETS 1-3. MATERIAL: 303SE CRES or 301 1/2 HARD CRES STEEL. | 1 | |
| DAC GSET-TI.01 | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 FIG.1 SHEETS 1-3. MATERIAL: 6AL-4V TITANIUM PER AMS 491 or MIL-T-9046 | 1 | |
| DANDT045 | NDT REFERENCE STANDARD SAAB 340 - DANDT045 | 1 | |
| DASTM D7215-16 | STANDARD TEST METHOD FOR CALCULATED FLASH POINT SIMULATED DISTILLATION ANALYSIS OF DISTILLATE FUELS | 1 | |
| DAT06AETA1000 | AXIAL STANDARD CRIMPING TOOL | 1 | |
| DAT06AETA4000 | AXIAL STANDARD CRIMPING TOOL | 1 | |
| DAT06AETA5000 | AXIAL STANDARD CRIMPING TOOL | 1 | |
| DB-C-4.1X6.35-70MM | STANDARD CARBIDE DRILL - 4.1P X 6.35 MD - 70OAL IN MM- 1/4 IN SHANK DIA | 1 | |
| DB-C-7.1X7.6-70MM | STANDARD CARBIDE DRILL - 7.1P X 7.6 MD - 70OAL IN MM- 1/4 IN SHANK DIA. | 1 | |
| DBS-1100-32 | Tension Adjustment Key for use with .250 standard width Band Tools | 1 | |
| DBS-2100 | HAND BANDING TOOL - STANDARD CLAMPING BAND | 5 | |
| DC-10 FIG603/15C | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 628B FIG.603 SHEET 15C | 1 | |
| DC-10 FIG603/15E/4340 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 CARBON STEEL, 54-10-11 PAGE 628D FIG.603 SHEET 15E | 1 | |
| DC-10 FIG603/15E/Ti | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 628D FIG.603 SHEET 15E | 1 | |
| DC-10 FIG603/15G | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 CARBON STEEL, 54-10-11 PAGE 628F FIG.603 SHEET 15G | 1 | |
| DC-10 FIG603/23 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 7075-T6 ALUMINUM, 54-10-11 PAGE 635 FIG.603 SHEET 23 | 1 | |
| DC-10 FIG603/24-Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 636C FIG.603 SHEET 24 | 1 | |
| DC-10 FIG603/24-Ti | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 636C FIG.603 SHEET 24 | 1 | |
| DC-10 FIG603/25 | DOUGLAS DC-10 WING CLEVIS REFERENCE STANDARD 6AL-6V or 6AL-4 TITANIUM, 54-10-11 PAGE 637 FIG.603 SHEET 25 | 1 | |
| DC-10 FIG603/27Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 639 FIG.603 SHEET 27 | 1 | |
| DC-10 FIG603/27Ti | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 639 FIG.603 SHEET 27 | 1 | |
| DC-10 FIG603/28LOWER/Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 640 FIG.603 SHEET 28 (LOWER) | 1 | |
| DC-10 FIG603/28LOWERTi | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 640 FIG.603 SHEET 28 (LOWER) | 1 | |
| DC-10 FIG603/28UPPER/Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 640 FIG.603 SHEET 28 (UPPER) | 1 | |
| DC-10 FIG603/28UPPER/Ti | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 640 FIG.603 SHEET 28 (UPPER) | 1 | |
| DC-10 FIG603/29Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 641 FIG.603 SHEET 29 | 1 | |
| DC-10 FIG603/29Ti | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 641 FIG.603 SHEET 29 | 1 | |
| DC-10 FIG603/30-AL | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 7075-T6 ALUMINUM, 54-10-11 PAGE 642 FIG.603 SHEET 30 | 1 | |
| DC-10 FIG603/39-1 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4130 or 4340, 54-10-11 PAGE 651 FIG.603 SHEET 39, BOLT IDENTIFICATION 71658-7-35 #1 | 1 | |
| DC-10 FIG603/39-2 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4130 or 4340, 54-10-11 PAGE 651 FIG.603 SHEET 39, BOLT IDENTIFICATION 71658-18-53 #2 | 1 | |
| DC-10 FIG603/39-3 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4130 or 4340, 54-10-11 PAGE 651 FIG.603 SHEET 39, BOLT IDENTIFICATION 71658-18-53 #3 | 1 | |
| DC-10 FIG603/39-4 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4130 or 4340, 54-10-11 PAGE 651 FIG.603 SHEET 39, BOLT IDENTIFICATION 71658-7-35 #4 | 1 | |
| DC-10 FIG603/43 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 655 FIG.603 SHEET 43 | 1 | |
| DC-10 FIG603/5 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 CARBON STEEL, 54-10-11 PAGE 617 FIG.603 SHEET 5 | 1 | |
| DC-9/MD-80-1 FIG 21 | Boeing DC-9/MD-80 Reference Standard Design (1- Assembly) Figure 21, Sheet 1-5 Page 31-35, 7-5. Includes Test Report and Certificate of Conformance. | 1 | |
| DC3-1 | DC-3 REFERENCE STANDARD ..SECTION 3 PAGE 2 FIGURE 1.1 | 1 | |
| DHC 25533-001 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC 25533-003M | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC 29116-001 | CALIBRATIONTEST STANDARD (CTS) | 3 | |
| DHC 29116-007 | CALIBRATIONTEST STANDARD (CTS) | 3 | |
| DHC 29117-001 | CALIBRATIONTEST STANDARD (CTS) | 3 | |
| DHC 29198-003 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC 29298-001 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC 29394-001 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC 29434-101 | CALIBRATIONTEST STANDARD (CTS) | 3 | |
| DHC 29438-001 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC 29442-001 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC 29443-001 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC25533-001 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC25533-003M | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC29298-001 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| DHC29298-003 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| DHC29434-101 | CALIBRATIONTEST STANDARD (CTS) | 3 | |
| DHC29436-001 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| DHC29437-001 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| DHC29445-001 | CALIBRATION TEST STANDARD - Q400 | 3 | |
| DK-A320-53-1378-1 | STANDARD TOOL | 3 | |
| DKA320531378-1 | STANDARD TOOL | 3 | |
| DKA3205313781 | STANDARD TOOL | 3 | |
| DKA3205313791 | STANDARD TOOL | 2 | |
| DKA320531381-1 | STANDARD TOOL | 1 | |
| DLH-1 | STANDARD DELAY. POLYSTYRENE 1/4 IN. DIAMETER, 10 MICROSECOND DELAY(0.45IN LONG), FITS 0.25 IN. REPLACEABLE DELAY LINE TRANSDUCERS | 1 | |
| DLH-2 | STANDARD DELAY. POLYSTYRENE 1/2 IN. DIAMETER, 11 MICROSECOND DELAY, FITS 0.50 IN. REPLACEABLE DELAY LINE TRANSDUCERS | 1 | |
| DLH294 | STANDARD UNIT | 1 | |
| DMAK-A320X-E18K2P0V3 | STANDARD PITOT STATIC ADAPTER KIT | 1 | |
| DMAK-A320X-E1K0P0V3 | STANDARD PITOT STATIC ADAPTER KIT | 1 | |
| DMC1264 | KIT, CRIMP TOOL - ELECTRICAL CONNECTOR REF FOUND IN STANDARD WIRE PRACTICES MANUAL (SWPM). (DANIELS MANUFACTURING CORPORATION) | 6 | |
| DN2XD5-02 | STANDARD WRENCHES | 1 | |
| DN2YD3-02 | STANDARD SOCKETS | 1 | |
| DPI-610 | DRUCK / GE SENSING PRESSURE CALIBRATOR - STANDARD - REFURBISHED* | 11 | |
| DPS1000 | DIGITAL PITOT STATIC TEST SET , WITH STANDARD ACCESSORIES | 9 | |
| DRXDA31320GF | STANDARD REPLACEMENT WHEEL X | 1 | |
| DSE-100X | STANDARD TOOL,DIGIT | 1 | |
| DT1407K3D1E01B0 | HYDRO Standard A330 / A340-200/-300 Nose Tripod Jack | 2 | |
| E-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 3 | |
| E-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| E-2TM | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| E135-600 | BLADE COVERS (STANDARD DESIGN) (set of 4) | 1 | |
| E18001 | STANDARD BATTERY DISCONNECT PLUG ASSY | 1 | |
| E53-002A | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .031"..Doubler = .040"..Filler = .031"..Stringer = .063" | 1 | |
| E53-002A. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .031"..Doubler 1 = .040"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002B | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .047"..Doubler = .050"..Filler = .047"..Stringer = .063" | 1 | |
| E53-002B. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .047"..Doubler 1 = .050"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002C | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .055"..Doubler = .063"..Filler = .055"..Stringer = .063" | 1 | |
| E53-002C. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .055"..Doubler 1 = .063"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002D | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .071"..Doubler = .080"..Filler = .071"..Stringer = .063" | 1 | |
| E53-002D. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .071"..Doubler 1 = .080"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002E | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .080"..Doubler = .098"..Filler = .080"..Stringer = .063" | 1 | |
| E53-002E. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .080"..Doubler 1 = .098"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002F | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .098"..Doubler = .110"..Filler = .098"..Stringer = .063" | 1 | |
| E53-002F. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .098"..Doubler 1 = .110"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-003A | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-003B | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-003C | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-003D | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-003E | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-003F | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-004 | EMBRAER 190/195 REFERENCE STANDARD PT 6 53-23-00 pages 1-13. Material: 2024-T3 Alclad Aluminum. Repair Doubler Configuration. Includes Test Report and Certificate of Conformance. Repair Doubler = .125" Fus Skin Thickness = .098" Filler = .098" In | 2 | |
| E54-003 | EMBRAER 170/175 CALIBRATION STANDARD PT 4 54-50-00 Embraer 170 NDT 1967 Rev. 49, pages 11-13 and Embraer 175 NDT 5893 Rev. 25, pages 10-12. Includes Test Report and Certificate of Conformance. | 1 | |
| EAA0335N13A | Diagnostic Repair Standard Cha | 1 | |
| EBTOR-HW-STDW | EBTOR-HW-STDW;STANDARD HW WARRANTY OF 3 YEARS EXTRATED FROM OUR HW PRICE - BTOR | 1 | |
| EBTOR-HW-STDW1 | EBTOR-HW-STDW1;STANDARD HW WARRANTY OF 1 YEAR EXTRATED FROM OUR HW PRICE - BTOR ONLY | 1 | |
| EC-AF-NRK-Case | CASE FOR EDDY CURRENT STANDARD TOOL | 1 | |
| ECL-100 | ENGINE COVER SET, standard design (set of 8) | 1 | |
| ECTSA109 | 0.5M STANDARD LIGHTBAR | 1 | |
| ECTSA109UK | 0.5M STANDARD TS LIGHT | 1 | |
| ED-TB-AL | EDDY CURRENT STANDARD | 1 | |
| ED-TB-CS | EDDY CURRENT STANDARD | 1 | |
| ED-TB-TI | EDDY CURRENT STANDARD | 1 | |
| EEBC500B-INT | STANDARD NATO BATTERY CHARGER | 1 | |
| EEBM4BANK-1 | ONE 6FT STANDARD CABLE/CLAMPS | 1 | |
| EI1566 | METERING EQUIPMENT-BIOCIDE-STANDARD EI1566 | 1 | |
| EKA 3205313781 | STANDARD TOOL | 3 | |
| EKA3205313791 | STANDARD TOOL | 2 | |
| EKA330533226-3 | STANDARD TOOL TOOLD07 | 1 | |
| ELHFSET | HOLE FILDER KIT, 5PC 13-1/2" STANDARD BUSHING | 1 | |
| ELOTEST M2 | EDDY CURRENT FLAW DETECTOR WITH A SET OF SENSORS, STANDARD SAMPLES, CABLES | 3 | |
| ELOTEST M3 | EDDY CURRENT FLAW DETECTOR WITH A SET OF SENSORS, STANDARD SAMPLES, CABLES | 1 | |
| EM145NDI540043A | EMBRAER REFERENCE STANDARD 54-50-00 PT 2 FIG 606 | 1 | |
| EM145NDI540047A | EMBRAER REFERENCE STANDARD 54-50-00 PT 2 FIG 615 | 1 | |
| EM8000E-ENC | EM8000E-ENC;MTS-8000E V2 Mainframe with Standard Power | 1 | |
| EMB-CFD | STANDARD FUNNEL | 1 | |
| ENDMILL-2-FLUTE-53-002C | STANDARD ENDMILL 2 FLUTE REG LENGTH 53-002C | 1 | |
| ENDMILL-2-FLUTE-53-006C | STANDARD ENDMILL 2 FLUTE REG LENGTH 53-006C | 1 | |
| EO13829.001/1 | Aeronautical Engineers Australia Reference Standard Fig.2 Page 5 DOC NO: MMS13829.001/1 and REF EO: EO13829.001/1 | 1 | |
| EOTDRV2-STD | EOTDRV2-STD;EOTDR V2 STANDARD CONFIGURATION | 1 | |
| EP33-20-310 | STANDARD TEST SYSTEM | 1 | |
| ESRX.187-.250 | Adjustable X Type probe for Rohmann Standard Rotor, .187"-.250", 100KHz-2MHz | 1 | |
| ESRX.250-.312 | Adjustable X Type probe for Rohmann Standard Rotor, .250"-.312", 100KHz-2MHz | 1 | |
| ESRX.312-.375 | Adjustable X Type probe for Rohmann Standard Rotor, .312"-.375", 100KHz-2MHz | 1 | |
| ESRX.375-.437 | Adjustable X Type probe for Rohmann Standard Rotor, .375"-.437", 100KHz-2MHz | 1 | |
| ESRX.437-.500 | Adjustable X Type probe for Rohmann Standard Rotor, .437"-.500", 100KHz-2MHz | 1 | |
| ESRX.500-.625 | Adjustable X Type probe for Rohmann Standard Rotor, .500"-.625", 100KHz-2MHz | 1 | |
| ESRX.625-.750 | Adjustable X Type probe for Rohmann Standard Rotor, .625"-.750", 100KHz-2MHz | 1 | |
| ESRX.750-.875 | Adjustable X Type probe for Rohmann Standard Rotor, .750"-.875", 100KHz-2MHz | 1 | |
| ESRX.875-1.0 | Adjustable X Type probe for Rohmann Standard Rotor, .875"-1.0", 100KHz-2MHz | 1 | |
| ESRX1.0-1.125 | Adjustable X Type probe for Rohmann Standard Rotor, 1.0"-1.125", 100KHz-2MHz | 1 | |
| ESRX1.125-1.25 | Adjustable X Type probe for Rohmann Standard Rotor, 1.125"-1.25", 100KHz-2MHz | 1 | |
| ESRX1.250-1.375 | Adjustable X Type probe for Rohmann Standard Rotor, 1.250-1.375", 100KHz-2MHz | 1 | |
| ESRX12-15M/60WL | Adjustable X Type probe for Rohmann Standard Rotor, 12-15mm, 60mm WL, 100KHz-1MHz | 1 | |
| ESRY 40-55M | ELOTEST Standard Rotor Y Probe, 40-55mm Diameter, 100Khz-2Mhz | 1 | |
| ESRY 5-6.5M | ELOTEST Standard Rotor Y Probe, 5-6.5mm Diameter, 100Khz-2Mhz | 1 | |
| ESRY.125-.187 | ELOTEST Standard Rotor Y Probe, .125-.187 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.156-.187 | ELOTEST Standard Rotor Y Probe, .156-.187 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.187-.250 | ELOTEST Standard Rotor Y Probe, .187-.250 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.250-.312 | ELOTEST Standard Rotor Y Probe, .250-.312 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.312-.375 | ELOTEST Standard Rotor Y Probe, .312-.375 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.375-.437 | ELOTEST Standard Rotor Y Probe, .375-.437 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.437-.500 | ELOTEST Standard Rotor Y Probe, .437-.500 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.500-.625 | ELOTEST Standard Rotor Y Probe, .500-.625 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.625-.750 | ELOTEST Standard Rotor Y Probe, .625-.750 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.750-.875 | ELOTEST Standard Rotor Y Probe, .750-.875 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.875-1.0 | ELOTEST Standard Rotor Y Probe, .875-1.0 Diameter, 100Khz-2Mhz | 1 | |
| ESRY1.0-1.125 | ELOTEST Standard Rotor Y Probe,1.0-1.125 Diameter, 100Khz-2Mhz | 1 | |
| ESRY1.500-1.625 | ELOTEST Standard Rotor Y Probe, 1.500- 1.625 Diameter, Shielded..100Khz-2Mhz | 1 | |
| ESRY1.625-1.750 | ELOTEST Standard Rotor Y Probe, 1.625- 1.750 Diameter, Shielded..100Khz-2Mhz | 1 | |
| ET.28 | Bombardier Bolt hole and surface crack reference standard 6061-T6, 15 Holes, .030 Midwall notches top plate, (2) .030 corner notches each hole on the bottom plate. .008, .020, .030 surface notches | 1 | |
| ET002 | BRANTLY B2 MAIN ROTOR BLADE ROOT SKIN CALIBRATION STANDARD PG.2. MATERIAL: 2024-T3 ALUMINUM BARE & CLAD. Includes Test Report and Certificate of Conformance. | 1 | |
| ET6018 | CUSTOM SIKORSKY S61-N FLAT BOTTOM HOLE AFT REAR FUSELAGE REFERENCE STANDARD 51-10-05 FIGURE 7 (SHEETS 1-5). MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certiicate of Conformance. | 1 | |
| ETBS AL-1T/2024-T3 0.032 | MD REFERENCE STANDARD ETFL PROCEDURE 5 06-10-02 | 1 | |
| EX601R47015-001 | REF STANDARD PIANO HUGE | 1 | |
| EX601R47015−001 | Calibration reference standard − piano hinge passenger door (Bombardier Inc.) | 1 | |
| EX601R51093 | Calibration reference standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EX604-60024 | CRJ700/900/1000 Calibration Standard PT6 53-11-108 PG19 FG4 | 2 | |
| EX604−60024 | Calibration reference standard multi−layered aluminum alloy fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 2 | |
| EX605-60037-001 | REFERENCE STANDARD UT | 1 | |
| EX605−60037−001 | CALIBRATION REFERENCE STANDARD MADE FROM | 1 | |
| EXBC670-59040-005 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 3.000 IN. (76.20 MM)OUTSIDE DIAMETER 1.563 IN. (39.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−001 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 4.224 IN. (107.29 MM)OUTSIDE DIAMETER 2.311 IN. (58.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−003 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 3.374 IN. (85.70 MM)OUTSIDE DIAMETER 2.311 IN. (58.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−007 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.000 IN. (50.80 MM)OUTSIDE DIAMETER 1.032 IN. (26.21 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−009 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.000 IN. (50.80 MM)OUTSIDE DIAMETER 1.332 IN. (33.83 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−011 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.500 IN. (63.50 MM)OUTSIDE DIAMETER 1.563 IN. (39.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−013 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.500 IN. (63.50 MM)OUTSIDE DIAMETER 1.332 IN. (33.83 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59045 | CALIBRATION REFERENCE STANDARD ASSEMBLY ALUMINUM ALLOY CONTAINS 0.250 IN. (6.35 MM) LONG ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59046 | CALIBRATION REFERENCE STANDARD ASSEMBLY ALUMINUM ALLOY CONTAINS 0.250 IN. (6.35 MM) LONG ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59066-001 | CALIBRATION REFERENCE STANDARD CONTAINS 0.250 IN | 1 | |
| EXBC670-59066−001 | CALIBRATION REFERENCE STANDARD CONTAINS 0.250 IN (6.35 MM) LONG0.005 IN. (0.127 MM) WIDE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59089-001 | CALIBRATION REFERENCE STANDARD SIMILAR IN MATERIAL AS THE INSPECTION AREA CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ) | 1 | |
| EXBC670-59089−001 | CALIBRATION REFERENCE STANDARD SIMILAR IN MATERIAL AS THE INSPECTION AREA CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59133 | CALIBRATION REFERENCE STANDARD MADE FROM ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59141 | CALIBRATION REFERENCE STANDARD MULTI LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59141 | CALIBRATION REFERENCE STANDARD | 1 | |
| EXBC670-59142 | CALIBRATION REFERENCE STANDARD MADE FROM ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59142 | CALIBRATION REFERENCE STANDARD | 1 | |
| EXBC670-59145 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59148 | CALIBRATION REFERENCE STANDARD (CRS) MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670-59156 | CALIBRATION REFERENCE STANDARD MADE FROM MULTIPLE ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59158 | CALIBRATION REFERENCE STANDARD (CRS) MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.). | 1 | |
| EXBC670-59159 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 1 | |
| EXBC670-59160 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERED FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EXBC670-59161 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59163 | CALIBRATION REFERENCE STANDARD TITANIUM ALLOY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCH. (BOMBARDIER INC.EQUIVALENT) | 1 | |
| EXBC670-59164 | CALIBRATION REFERENCE STANDARD MULTIPLE LAYERS ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59174 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59176 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59177 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59179 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 1 | |
| EXBC670-59180 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59181 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670-59182 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 1 | |
| EXBC670-59183-001 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) TRANSDUCER - ANGLE BEAM, 5.0 MHZ, 0.375 IN. (9.53 MM) H X | 1 | |
| EXBC670-59185 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EXBC670−59040−001 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 4.224 in. (107.29 mm)outside diameter 2.311 in. (58.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−003 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 3.374 in. (85.70 mm)outside diameter 2.311 in. (58.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−005 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 3.000 in. (76.20 mm)outside diameter 1.563 in. (39.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−007 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.000 in. (50.80 mm)outside diameter 1.032 in. (26.21 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−009 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.000 in. (50.80 mm)outside diameter 1.332 in. (33.83 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−011 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.500 in. (63.50 mm)outside diameter 1.563 in. (39.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−013 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.500 in. (63.50 mm)outside diameter 1.332 in. (33.83 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59044 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59045 | Calibration reference standard assembly aluminum alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59046 | Calibration reference standard assembly aluminum alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59065 | Calibration reference standard assembly aluminum and steel alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier inc.) | 1 | |
| EXBC670−59066−001 | Calibration reference standard contains 0.250 in (6.35 mm) long0.005 in. (0.127 mm) wide electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59068 | Calibration reference standard multiple layered assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59089−001 | Calibration reference standard similar in material as the inspection area containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59094 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59098 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59099 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59101 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59125 | Calibration reference standard assembly contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59133 | Calibration reference standard made from aluminum alloy containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59134 | Calibration reference standard aluminum alloy that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59139−001 | Calibration reference standard made from aluminum alloy that contains electrical discharge machined notches (Bombardier inc.) | 1 | |
| EXBC670−59141 | Calibration reference standard multi layers fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59142 | Calibration Reference Standard made from aluminum alloy containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59143 | Calibration Reference Standard assembly that contains electrical discharge machined notches. (Bombardier Inc.) | 1 | |
| EXBC670−59145 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59148 | Calibration Reference Standard (CRS) multiple layers fastened assembly that contains electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59153 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59154 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59156 | Calibration Reference Standard made from multiple aluminum alloy containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59157 | Calibration reference standard multiple layered fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59158 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | 1 | |
| EXBC670−59159 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | 1 | |
| EXBC670−59161 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59162 | Calibration Reference Standard aluminum alloy that contains electrical discharge machined notch. (Bombardier Inc. or equivalent) | 1 | |
| EXBC670−59163 | Calibration Reference Standard titanium alloy that contains electrical discharge machined notch. (Bombardier Inc. or equivalent) | 1 | |
| EXBC670−59164 | Calibration Reference Standard multiple layers assembly that contains electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59174 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59176 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59177 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59178 | Calibration reference standard multiple layer fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59180 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59181 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBD 400-50040 | CALIBRATION TEST STANDARD (CTS), | 1 | |
| EXBD 400−50040 (1) | CALIBRATION TEST STANDARD FOR ULTRASONIC INSPECTION | 1 | |
| EXBD400-50013-005 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| EXBD400-50023 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| EXBD400-50040 | CALIBRATION TEST STANDARD FOR ULTRASONIC INSPECTION (DHC) | 1 | |
| EXBD400-50040-001 | CALIBRATION TEST STANDARD FOR ULTRASONIC INSPECTION | 3 | |
| EXBD400-50047-001 | CALIBRATION TEST STANDARD (CTS)/ DHC | 1 | |
| EXBD400-50051-001 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| EXBD400-50067-001 | CALIBRATION TEST STANDARD (CTS), | 1 | |
| EXBD400-50068-105 | CALIBRATION TEST STANDARD (CTS), P/N EXBD400-50068-105 | 1 | |
| EXBD400-50069-001 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| EXBD400-50069-004 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| EXBD400-50071-001 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| EXBD400-50093-005 | CALIBRATION TEST STANDARD (CTS), | 1 | |
| EXBD400-51325-101 | CALIBRATION TEST STANDARD (CTS) | 2 | |
| EXBD400-51325-101 | CALIBRATION TEST STANDARD (CTS | 2 | |
| EXBD400-53070-001 | CALIBRATIONTEST STANDARD (CTS) | 2 | |
| EXBD400-54006-001 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| EXBD400-80003 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| EXBD400-80005 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| EXBD400−50047−001 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| EXBD400−51325−101 | CALIBRATION TEST STANDARD (CTS) | 2 | |
| EXCM601R30014 | REFERENCE STANDARD (CRJ200) | 1 | |
| EXCM601R30038 | REFERENCE STANDARD (CRJ200) | 1 | |
| EXGC926-7008-001 | CALIBRATION STANDARD ASSY | 2 | |
| EXGC926-7011-001 | CALIBRATION STANDARD ASSY | 1 | |
| EXSH670-31001−1 | CALIBRATION REFERENCE STANDARD STGR15R BUTT JOINT CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH670-31002-1 | CALIBRATION REFERENCE STANDARD STGR1L AND STGR20L BUTT JOINTS CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH670-31011−1 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH670-35910−1 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES | 1 | |
| EXSH670−31001−1 | Calibration reference standard STGR15R butt joint contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH670−31002−1 | Calibration reference standard STGR1L and STGR20L butt joints contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH670−31011−1 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH670−31014−1 | Calibration reference standard pressure bulkhead machined frames FS693.00 and FS847.00 contains subsurface electrical discharge machined notches. (Bombardier Inc.) | 1 | |
| EXSH670−35910−1 | Calibration Reference Standard assembly that contains electrical discharge machined notches | 1 | |
| EXSH690-31003−11 | CALIBRATION REFERENCE STANDARD EMERGENCY EXIT DOOR SURROUND STRUCTURE CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH690-31022 | CALIBRATION REFERENCE STANDARD POTABLE WATER. | 1 | |
| EXSH690-31023−1 | CALIBRATION REFERENCE STANDARD CIRCUMFERENTIAL SKIN JOINT STGR7 TEST PIECE CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH690−31003−11 | Calibration reference standard emergency exit door surround structure contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH690−31022 | Calibration reference standard potable water. | 1 | |
| EXSH690−31023−1 | Calibration reference standard circumferential skin joint STGR7 test piece contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| F-80 | 3/8" DRIVE DUAL TECHNOLOGY STANDARD HANDLE RATCHET | 3 | |
| F12-DEL-3C1N | REPAIR REFERENCE STANDARD GR/EP FIBERGLASS STEP DELAM DEFECT. ALL BOEING AIRCRAFT MODELS PART 1 51-01-01. Includes C-SCAN Certification and Certificate of Conformance. | 1 | |
| F12-DIS-3C1N | REPAIR REFERENCE STANDARD GR/EP FIBERGLASS STEP DISBOND and CORE FIBERGLASS INTERFACE. ALL BOEING AIRCRAFT MODELS PART 1 51-01-01. Includes C-SCAN Certification and Certificate of Conformance. | 1 | |
| F23E | SNAP-ON 3/8" DRIVE 1/4" FLAT TIP STANDARD BIT SOCKET DRIVER | 1 | |
| F70199-6 | Air Chuck - Standard Bore | 9 | |
| F70308 | STANDARD TAG -0 SUPPORT EQUIPMENT | 1 | |
| F70308-24 | STANDARD TAG-SUPPORT EQUIPMENT | 5 | |
| F70313-1 | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-2 | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-2/ 36"×24 | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-2/ 36"×24"×12" | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-2/32"×28"×12" | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-2/36"×24"×12" | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-3 | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-4 | STANDARD BOX - SUPPORT EQUIPMENT | 3 | |
| F70313-5 | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-6 | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F72913-10 | SLEEVE-MLG AXLE PROTEct STANDARD AXLE | 15 | |
| F729589-31 | SPANNER WRENCH AN STANDARD TYPE | 1 | |
| F72959 | Spanner Wrench AN Standard Type | 11 | |
| F72959-1 | Spanner Wrench - AN Standard Type | 9 | |
| F72959-1 thru -12 | All Standard Type - Spanner Wrench | 1 | |
| F72959-10 | Spanner Wrench - AN Standard Type | 4 | |
| F72959-11 | Spanner Wrench - AN Standard Type | 4 | |
| F72959-12 | Spanner Wrench - AN Standard Type | 4 | |
| F72959-13 | SPANNER WRENCH AN STANDARD TYPE | 3 | |
| F72959-14 | SPANNER WRENCH AN STANDARD TYPE | 2 | |
| F72959-15 | SPANNER WRENCH AN STANDARD TYPE | 1 | |
| F72959-2 | Spanner Wrench - AN Standard Type | 3 | |
| F72959-3 | Spanner Wrench - AN Standard Type | 3 | |
| F72959-31 | Spanner Wrench - AN Standard Type | 9 | |
| F72959-31 thru -42 | All Standard Type - Spanner Wrench | 1 | |
| F72959-31PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-32 | Spanner Wrench - AN Standard Type | 9 | |
| F72959-32PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-33 | Spanner Wrench - AN Standard Type | 10 | |
| F72959-33PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-34 | Spanner Wrench - AN Standard Type | 10 | |
| F72959-34PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-35 | Spanner Wrench - AN Standard Type | 12 | |
| F72959-36 | Spanner Wrench - AN Standard Type | 12 | |
| F72959-36PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-37 | Spanner Wrench - AN Standard Type | 9 | |
| F72959-37PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-38 | Spanner Wrench - AN Standard Type | 11 | |
| F72959-38PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-39 | Spanner Wrench - AN Standard Type | 10 | |
| F72959-39PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-4 | Spanner Wrench - AN Standard Type | 7 | |
| F72959-40 | Spanner Wrench - AN Standard Type | 24 | |
| F72959-41 | Spanner Wrench - AN Standard Type | 13 | |
| F72959-41PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-42 | Spanner Wrench - AN Standard Type | 9 | |
| F72959-42PM | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-5 | Spanner Wrench - AN Standard Type | 4 | |
| F72959-6 | Spanner Wrench - AN Standard Type | 4 | |
| F72959-7 | Spanner Wrench - AN Standard Type | 5 | |
| F72959-8 | Spanner Wrench - AN Standard Type | 3 | |
| F72959-9 | Spanner Wrench - AN Standard Type | 4 | |
| F72959-X | SPANNER WRENCH - AN STANDARD TYPE | 1 | |
| F72959-XX | Spanner Wrench -An Standard Type | 1 | |
| F7295935 | SPL-4834 SPANNER WRENCH AN STANDARD TYPE | 12 | |
| F7295940 | SPANNER WRENCH - AN STANDARD TYPE | 24 | |
| F80 | RACHET 3/8”INCH DRIVE STANDARD HANDLE | 3 | |
| F80FOD | 3/8" DR TECHNOLOGY STANDARD HANDLE RATCHET | 1 | |
| F80 | (3/8")DRIVE STANDARD HANDLE RATCHET | 3 | |
| F830 | STANDARD RATCHET | 1 | |
| FA12E | STANDARD HEX BIT SOCKET DRIVER, 3/8" DR, SAE 3/8" | 1 | |
| FA4E | STANDARD HEX BIT SOCKET DRIVER, 3/8" DR, SAE 1/8" | 1 | |
| FA6E | STANDARD HEX BIT SOCKET DRIVER, 3/8" DR, SAE 3/16" | 1 | |
| FA7E | SOCKET DRIVER, HEX, STANDARD 7/32 ENCAIXE 3/8" | 2 | |
| FAM5E | 3/8" DRIVE METRIC 5MM STANDARD HEX BIT SOCKET DRIV | 1 | |
| FAS5060 | CONDUCTIVITY STANDARD 9.563 | 1 | |
| FAS5061 | CONDUCTIVITY STANDARD 29.65 | 1 | |
| FAS5062 | CONDUCTIVITY STANDARD 32.25 | 1 | |
| FAS5063 | CONDUCTIVITY STANDARD 59.69 | 1 | |
| FAS5064 | CONDUCTIVITY STANDARD 100.15 | 1 | |
| FB2400-S | STANDARD PACKAGE FOD | 1 | |
| FB70-010-1B | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (FRANK BROWN) | 3 | |
| FB70-077-200 | ENGINE TROLLEY/CRADLE TRANSPORTIATION SHIPPING STANDARD (APPROVED CFM STANDARDS) (FRANK BROWN) | 7 | |
| FBPP-BAP1 | FBPP-BAP1;BARREL ASSEMBLY FOR PROBE STANDARD CONFIGURATION--REV001 | 2 | |
| FC34B | STANDARD FIXED KEY | 3 | |
| FEN06 | STANDARD TRIPOD-JACK SET A320 FAMILY INCL. NEO - TAIL | 1 | |
| FEN06A21 | HYDRO Standard A320 Family Tail Tripod Jack | 2 | |
| FEN10 | STANDARD TRIPOD-JACK SET A320 FAMILY INCL. NEO - NOSE | 1 | |
| FEN10A21 | HYDRO Standard A320 Family Nose Tripod Jack | 2 | |
| FEN121 | STANDARD B737 TAIL TRIPOD JACK | 1 | |
| FEN121A2 | HYDRO STANDARD B737 TAIL TRIPOD JACK | 1 | |
| FEN121A21 | HYDRO Standard B737 Tail Tripod Jack | 2 | |
| FEN122A21 | HYDRO Standard B737 Nose Tripod Jack | 2 | |
| FEN351 | STANDARD TRIPOD-JACK SET A320 FAMILY INCL. NEO - WING | 1 | |
| FEN351A21 | HYDRO Standard A320 Family Wing Tripod Jack | 2 | |
| FEN352A21 | HYDRO Standard B737 Wing Tripod Jack | 2 | |
| FG-M6ADP | ADAPTER STANDARD SET FOR RGANGE 2-200 LB | 1 | |
| FH80 | Ratchet, Dual 80™ Technology Comfort Handle, Standard Length, 3/8" drive, 9 9/16" | 3 | |
| FLIR-T640 | THERMAL IMAGER HAND HELD STANDARD MODEL T640 WITH 25 X 19 LENS , 640 X 480 PIXELS ,30 HZ MSX TECHNOLOGY & BUILT IN VISUAL CAMERA | 1 | |
| FLUKE 289 | STANDARD MULTIMETER | 17 | |
| FLUKE 5540A | SPEC / 5540A STANDARD MULTI-PRODUCT CALIBRATOR | 1 | |
| FOKKER-50/60 | FOKKER 50/60 CALIBRATION STANDARD PART 6 53-30-09 PAGE 6 FIGURE 3. MATERIAL: 2024-T3 ALUMINUM. NOTE: ***DOES NOT INCLUDE 3M BELLY PROTECTIVE TAPE 8641 | 1 | |
| FP22E2 | #2 PHILLIPS® STANDARD DRIVER BIT | 1 | |
| FP32A | 3/8" DRIVE #3 PHILLIPS® STANDARD BIT SOCKET DRIVER | 1 | |
| FP32E | 3/8" DRIVE #3 PHILLIPS STANDARD BIT SOCKET DRIVER | 1 | |
| FP32E2 | #3 PHILLIPS STANDARD DRIVER BIT | 1 | |
| FP41E | 3/8" DRIVE #4 PHILLIPS STANDARD BIT SOCKET DRIVER | 2 | |
| FRDH101 | 3/8" DRIVE 12-POINT SAE 5/16" STANDARD TORQUE ADAPTOR | 3 | |
| FRDH121 | 3/8" DRIVE 12-POINT SAE 3/8" STANDARD TORQUE ADAPTOR | 2 | |
| FRDH141 | 3/8" Drive 12-Point SAE 7/16" Standard Torque Adaptor | 12 | |
| FRDH161 | TORQUE ADAPTER 1/2 - 3/8" DRIVE 12-POINT SAE 1/2" STANDARD TORQUE ADAPTER | 2 | |
| FRDH181 | 3/8" DRIVE 12-POINT SAE 9/16" STANDARD TORQUE ADAPTOR | 3 | |
| FRDH201 | 5/8" STANDARD TORQUE ADAPTOR 12-POINT | 1 | |
| FRDH221 | 11/16" STANDARD TORQUE ADAPTOR 12-POINT | 2 | |
| FRDH241 | 3/4" STANDARD TORQUE ADAPTOR 12-POINT | 1 | |
| FRDH281 | 3/8" DRIVE 12-POINT SAE 7/8" STANDARD TORQUE ADAPTOR | 1 | |
| FRDH301 | 3/8" DRIVE 12-POINT SAE 15/16" STANDARD TORQUE ADAPTOR | 1 | |
| FS725 | RUBIDIUM FREQUENCY STANDARD FS725 | 1 | |
| FTIA3205313781 | STANDARD TOOL | 1 | |
| FTIA3205313791 | STANDARD TOOL | 1 | |
| FTX27E | 3/8" DRIVE TORX® T27 STANDARD BIT SOCKET DRIVER | 1 | |
| FULL-STD-1 | FULL-STD-1;1yr. Renewal Standard Full Maintenance Contract Existing Equipment | 1 | |
| FW1/4-SS18-8 | FLAT WASHER STANDARD 1/4 DIA STAINLESS | 1 | |
| G01J3P3 | KIT, CRIMP TOOL - ELECTRICAL CONNECTOR REF FOUND IN STANDARD WIRE PRACTICES MANUAL (SWPM) (GRAPHIC DATAKITS INTERNATIONAL (6495 CORP.)) | 1 | |
| G11-STD-3 | STANDARD G11STD-3 | 1 | |
| G32066-21 | 1 3/4-INCH STANDARD SOCKET | 1 | |
| G601R572101-1 | CALIBRATION STANDARD - EDDY CURRENT INSPECTION (4777 CYCLES) | 1 | |
| G601R572101−1 | Calibration Standard − Eddy Current Inspection (4777 cycles) | 1 | |
| G704B | G704B CHERRYMAX® POWER RIVETER STANDARD MODEL-RIVETER ONLY ( STROKE: .510" )( PULLING FORCE: 3,100 LBS (1,406 KGS) )( DESCRIPTION: RIVETER ONLY ) | 11 | |
| GA0002859-NH | NITROGEN HOSE 8M WITH STANDARD CONNECTOR | 1 | |
| GB704RK | Gage Bilt Standard PowerMAX Installation Kit | 1 | |
| GCA580 | ADAPTOR US STANDARD CONNECTION | 1 | |
| GEIT1512171 | USM GO STANDARD PLUS DMS GO BASIC | 1 | |
| GEN40-85-1P230 | POWER SUPPLY - PROGRAMMABLE DC (STANDARD OPTION, SINGLE PHASE AC INPUT) | 2 | |
| GENERAL BLOCK 29A032 | TITANIUM REFERENCE STANDARD 3 EDM CUT DEPTH 0.2 MM, 0.5 MM AND 1MM WITH WIDTH 0.05 MM – 0.25 MM | 1 | |
| GENERAL BLOCK 29A49 | STEEL REFERENCE STANDARD 3 EDM CUT DEPTH 0.2 MM, 0.5 MM AND 1MM WITH WIDTH 0.05 MM – 0.25 MM | 1 | |
| GENIE SLA25 | SUPERLIFT ADVANTAGE STANDARD BASE MATERIAL LIFT | 2 | |
| GLF-000 | CANOPY/NOSE COVER, H-201 Standard Libelle, all year use | 1 | |
| GLOVE310L | GLOVE 4X STANDARD LG | 1 | |
| GLOVE310M | GLOVE 4X STANDARD MD | 1 | |
| GLOVE310XL | GLOVE 4X STANDARD XL | 1 | |
| GLOVE310XX | GLOVE 4X STANDARD XXL | 1 | |
| GMIHB015015-1Z-2 | STANDARD FLEXIBLE BLANKET 15X15CM 1 ZONE - 230V | 1 | |
| GMIHB020020-1Z-2 | STANDARD BLANKETS | 1 | |
| GMIHB025025-1Z-2 | STANDARD BLANKETS RECTANGULAR 25X25 CM | 1 | |
| GMIHB040-1Z-2 | STANDARD HEATING BLANKET ROUND DIAM 40CM, 230V | 1 | |
| GMIHB040040-1Z-2 | STANDARD BLANKETS | 1 | |
| GMIHB040050-1Z-2 | STANDARD BLANKETS RECTANGULAR 30X50 CM | 1 | |
| GMIHB040060-1Z-2 | STANDARD BLANKETS RECTANGULAR 40X60 CM | 1 | |
| GOB7222 | STANDARD HANDLE COMBINATION SPANNER, INCHES (SET) (5/16 TO 1-5/8) | 1 | |
| GOEX722K | 22 PC 12-POINT SAE FLANK DRIVE® STANDARD COMBINATION WRENCH SET (5/16-1-5/8") | 3 | |
| GPKIT-5 | 5 Piece Rivet Gun Punch Kit - Standard Length - MADE IN THE USA! | 1 | |
| GPS3530S | 3/4"DR X 15/16" STANDARD 8PT | 1 | |
| GS19818-1 | ADAPT PISTON RETAINING NUT TO A STANDARD TORQUE WRENCH | 5 | |
| GS19820-1 | ADAPT THE PITCHLOCK NUT TO A STANDARD TORQUE WRENCH | 2 | |
| GS19822-1 | ADAPT THE PISTON RETAINING NUT TO A STANDARD TORQUE WRENCH | 2 | |
| GS2-612 | STANDARD GRIP SCALE | 1 | |
| GS20841-1 | ADAPT THE PISTON RETAINING NUT TO A STANDARD TORQUE WRENCH | 1 | |
| GS4MT | TOOL - INSTALLATION - HAND OPERATED - INSTALLS STANDARD .18", LIGHT-HEAVY .25", AND HEAVY .31" CROSS SECTION TIES | 7 | |
| GSB0900002 | TOWBAR, STANDARD MULTI-HEAD | 1 | |
| GSB1000014 | COVER-MAIN LANDING WHEEL (STANDARD TIRES) | 1 | |
| GSB1000017 | COVER-NOSE LANDING WHEEL (STANDARD TIRES) | 1 | |
| GSB2840008C | SET - HARNESS ADAPTER Q100, 200, 300, METRIC, STANDARD RANGE | 2 | |
| GSB5180003 | STANDARD - CALIBRATION | 1 | |
| GSB5500001 | REFERENCE STANDARD NDT TOOL | 1 | |
| GSE 450 | EMBRAER190/195 REFERENCE STANDARD PART 6 57-50-00 PAGE 5 FIGURE 1. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| GSE 503 | EMBRAER 190/195 REFERENCE STANDARD PT 4 53-10-00 pages 1-12 Embraer 190-NDT 2824, 270-801-B. Includes Test Report and Certificate of Conformance. | 1 | |
| GSE 503/171T17969-401 | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-10-00 pages 4-11. Includes Test Report and Certificate of Conformance. | 1 | |
| GT110 | TRACTOR - TOW - 72,000 DRAWBAR PULL - 90,000 GVW STANDARD (THE "STANDARD" IS NOT RECOMMENDED) - THE OPTIONAL 78,000 DRAWBAR PULL IS RECOMMENDED - 78,000 DRAW BAR PULL IS AVAILABLE AT 100K, 110K AND 120K GVW. 81.5" CAB HEIGHT | 1 | |
| GT111105 | AIRCRAFT WHEEL CHOCK STANDARD A320/B737 | 1 | |
| GTP-322 | FLUORESCING STANDARD CALIBRATION PAD GPT-32 | 1 | |
| GTS2 | CALIBRATION TEST STANDARD 2 | 1 | |
| GXO810NP | STANDARD HANDLE 60 DEGREE OFFSET HEAD. SIZE: 1/4" X 5/16" | 1 | |
| GYZJ-934-1 | STANDARD BARCOL IMPRESSOR | 3 | |
| H-5265 | STANDARD BORE AIR CHUCK | 13 | |
| H-5265-0P | LOCK ON AIR CHUCK STANDARD VALVE | 2 | |
| H-5265-OP | LOCK ON AIR CHUCK, STANDARD BORE VALVE | 2 | |
| H-5265A | STANDARD VALVE | 1 | |
| H-64B | REPLACEMENT STANDARD BLADES 100 PCKG | 1 | |
| H10-60 | STANDARD NOISE ATTENUATING HEADSET | 11 | |
| H3310 | STANDARD HEADSET | 10 | |
| HC2-S3 | STANDARD CLIMATE PROBE | 1 | |
| HCS9000B | Single Zone Hot Bonder with standard Accessory Package | 4 | |
| HCU103 | Standard equipment | 1 | |
| HDS 3.5/30-4 | KARCHER STEAM CLEANER - HDS 3.5/30-4 EA STANDARD HOT WATER PRESSURE WASHER, DIESEL/ELECTRIC, 3000 PSI, 3.5 GPM | 1 | |
| HFSET | 5 Pc 8-1/2" Standard Bushing Hole Finder Kit | 1 | |
| HFSTIN-20PC | 20 Piece Hole Finder (Strap Duplicator) Kit! Includes all five sizes in 8-1/2" & 13-1/2" in Standard and Inverted Styles! | 1 | |
| HH-60W | STANDARD EXPEDITIONARY TOOL KIT | 1 | |
| HLA4424-NM | Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting | 1 | |
| HLA4424-NM-PS | Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting with Safety | 1 | |
| HLA4816-1 | STANDARD SCREW-IN INFLATION NIPPLE - TUBE FOR BP HOSE | 1 | |
| HLA5625-30 | Inflation Handle Staubli RBE06 Inlet - Standard Inflation Fitting HLA6226-PD Outlet | 1 | |
| HLA5625-30-PS | Inflation Handle Staubli RBE06 Inlet - Standard Inflation Fitting with Safety HLA6226-PS Outlet | 1 | |
| HLA5854-P-D | Inflation Handle with Two Flexible Extensions (One with Standard Fitting and One with High Flow Fitting) in Transport Cases | 1 | |
| HLA5854-PS-GS | Inflation Handle with Two Flexible Extensions (One with Standard Fitting with Safety and One with High Flow Fitting with Safety) in Transport Cases | 1 | |
| HLA5959 | Hose Assembly for Air Supply to Jacks for Standard Valve | 1 | |
| HLA6226-PD | Standard Inflation Fitting barbed for Flexible Hose LP | 1 | |
| HLA6226-PS | Standard Inflation Fitting with Safety 1/4"NPT Threaded | 1 | |
| HLA6427A-PD | Precision Pressure Controller for Standard Valve (with Case) | 1 | |
| HLA6505 | Digital Inflation Handle Staubli RBE06 Inlet - Standard Inflation Fitting HLA6226-PD Outlet | 1 | |
| HLA6505-PS | Digital Inflation Handle Staubli RBE06 Inlet - Standard Inflation Fitting with Safety HLA6226-PS Outlet | 1 | |
| HLA6599 | Digital Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting | 1 | |
| HLA6599-PS | Digital Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting with Safety | 1 | |
| HLA7920 | ADAPTOR US STANDARD CONNECTION | 1 | |
| HP3458A | STANDARD MULTIMETER | 1 | |
| HPL-RALL-PD | RIGID PRESSURE TAP FOR STANDARD VALVE | 1 | |
| HRS-10A-0/0824 | NDT STANDARD TEMPLATE | 1 | |
| HRS-15A | 15 HOLE STANDARD 2024-T3, 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 1 | 1 | |
| HS0603K2D1B01B0 | HYDRO Standard A330/A340-200/ -300 Tail Stanchion | 2 | |
| HS7610 | HAMILTON STANDARD HS 7610 WRENCH SPANNER | 2 | |
| HS9458 | HAMILTON STANDARD HS 9458 WRENCH SPANNER | 3 | |
| HSEADP | Hose on side B: crimped with standard ad | 1 | |
| HSP-1825 | Standard Gauge Mod 15 | 1 | |
| HSP-1827 | Standard Gauge Mod 15 | 3 | |
| HTC-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 4 | |
| HTE-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 2 | |
| HU17589-1 | TAPER REAMER (STANDARD SIZE) (SR. NO. 14558/2-4) | 1 | |
| HU18038-2 | TAPER REAMER, STANDARD (SR. NO. 1042647) | 1 | |
| HU37870-1 | TAPER REAMER (STANDARD SIZE) (SR. NO. 1118675) | 1 | |
| HU37871-1 | TAPER REAMER (STANDARD SIZE) (SR. NO. DCC200081-1-001) | 1 | |
| IAE2R19854 | WORKING STANDARD (PART OF IAE2R19878) | 1 | |
| IAE2R19860 | WORKING STANDARD FOR OUTER DIAMETER INSPECTION | 1 | |
| IIW TYPE 2 | CALIBRATION REFERENCE STANDARD BLOCK, ALUMINUM. (GE OR EQUIVALENT) | 1 | |
| IIW TYPE 2 AL | REFERENCE STANDARD V1 - ALUMINIO | 1 | |
| INTEXA01 | Bowers INTEXA01 Intex Beam Gauge Standard Contacts 10mm Diameter (Pair) | 1 | |
| IPIK4103-6 | STANDARD PORTABLE SWAGER CUTTER AND IPR AND LOAD CELL SMT PRO KITS | 1 | |
| IPIK4103-7 | STANDARD PORTABLE SWAGER CUTTER AND IPR AND LOAD CELL SMT PRO KIT | 1 | |
| ITS-375 | Immersion Transducer, Standard Case, 5MHz, .375" ES, UHF Connector | 1 | |
| J27030-9 | Standard rig pin assy | 1 | |
| J34004 -8 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J34004-1 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J34004-3 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J34004-4 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J34004-5 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J34004-6 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J34004-7 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J34004-8 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J34004-9 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J442742-7RD | PROTO® ROLLER CABINET, STANDARD DUTY, LOCKABLE | 1 | |
| J4708T | PROTO 1/4'' 12-POINT SAE STANDARD SOCKET | 2 | |
| J71063-1 | STANDARD TOOL - COWL LATCHING ASSEMBLY, ENGINE COW | 3 | |
| JAT14977A | JIFFY® Standard 90° Head Attachment - Production Grade - MADE IN THE USA! | 1 | |
| JCW60BL | STANDARD CREEPER | 1 | |
| JCW60R | SNAP-ON® JCW60R STANDARD CREEPER WITH HEADREST, 40 IN L X 17 IN W X 4 IN H X 2-1/2 IN CASTER | 3 | |
| JCW62BL | F/O STANDARD CREEPER BLK | 1 | |
| JCW62G | F/O STANDARD CREEPER GRN | 1 | |
| JCW62O | F/O STANDARD CREEPER ORG | 1 | |
| JCW62PCM | F/O STANDARD CREEPER BLUE | 1 | |
| JCW62R | F/O STANDARD CREEPER RED | 1 | |
| JCW67R | STANDARD CREEPERS | 1 | |
| JCW80R | CREEPER, STANDARD SE | 3 | |
| JGL146 | FLUID SAMPLE STANDARD TEST | 1 | |
| JHW11212 | WRENCH, COMBINATION, STANDARD LENGTH, 3/8",12 POINT (P.NO. 11212) | 1 | |
| JHW11220 | WRENCH, COMBINATION, STANDARD LENGTH, 5/8",12 POINT (P.NO. 11220) | 1 | |
| JHW11222 | WRENCH, COMBINATION, STANDARD LENGTH, 11/16",12 POINT (P.NO. 11222) | 1 | |
| JHW24915 | 1/4IN DR STANDARD HX 5/16 BIT | 1 | |
| JHW24917 | 1/4IN DR STANDARD PH2 BIT | 1 | |
| JHW24921 | 1/4IN DR STANDARD T10 BIT | 1 | |
| JHW42302 | STANDARD SEAT CREEPER | 1 | |
| JHWWS-7-19TB | STANDARD SOCKET SET C1‘ FROM 11/2’ TO 3 1/2‘ PLUS UNIVERSAL JOINT AND 7 3/8’ EXTENSION INCLUDES METAL CASE - GENERIC | 1 | |
| JLA321C | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 3 | |
| JMP/CF6/D/4038 | 50 (2 X 25) GALLON ENGINE COMPRESSOR WASH RIG STANDARD VOLTAGE 115V/200V 400HZ FOR USE WITH AIRCRAFT | 1 | |
| JMP/GE90/D/4038/C200 | 2 X 25 GALLON COMPRESSOR WASH CART (STANDARD VOLTAGE 115V/200V 400HZ FOR USE WITH AIRCRAFT GPU ) | 1 | |
| JMP/LUFT/D/4972/C500 | 2 X 50 GALLON COMPRESSOR WASH RIG STANDARD VOLTAGE 115V/200V 400HZ FOR USE WITH AIRCRAFT GPU | 2 | |
| JMP/LUFT/D/4972/C800 | 2 X 50 GALLON COMPRESSOR WASH RIG STANDARD VOLTAGE 115V/200V 400HZ FOR USE WITH AIRCRAFT GPU | 1 | |
| JMPCF6D4038 | 50 (2 X 25) GALLON ENGINE COMPRESSOR WASH RIG STANDARD VOLTAGE 115V/200V 400HZ FOR USE WITH AIRCRAFT | 1 | |
| K 780 | K 780;Mains Cable Straight Line UK Standard Plug | 1 | |
| K-1/16 | #50 (1/16") Standard Spring Cleco | 1 | |
| K-1/4 | 1/4" Standard Spring Cleco | 3 | |
| K-1/8 | 1/8" (#30) Standard Spring Cleco - MADE IN USA! | 6 | |
| K-144 | #27 (.144) Standard Spring Cleco | 1 | |
| K-177 | #16 (.177) Standard Spring Cleco | 1 | |
| K-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 8 | |
| K-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K-2M | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K-2MHD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K-2ML | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K-2MR | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K-2R | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K-3/16 | 3/16" (#10) Standard Spring Cleco - MADE IN USA! | 3 | |
| K-3/32 | 3/32" (#40) Standard Spring Cleco - MADE IN USA! | 2 | |
| K-5/32 | 5/32" (#20 / #21) Standard Spring Cleco - MADE IN USA! | 3 | |
| K-7/32 | 7/32" Standard Spring Cleco | 1 | |
| K-7/64 | 7/64" Standard Spring Cleco | 1 | |
| K1-4 | 1/4" STANDARD SPRING CLECO | 3 | |
| K1-8 | 1/8" (#30) STANDARD SPRING CLECO - MADE IN USA! | 6 | |
| K12003-1 | FILL TOOL – HYDRAULIC STRUT, SEMI LEVER GEAR STANDARD PRACTICES – AIRFRAME | 5 | |
| K15/15B | FACOM 12 POINT STANDARD SOCKET | 1 | |
| K2 | STANDARD UT CALIBRATION BLOCK | 8 | |
| K5/32" | 5/32" (#20 / #21) STANDARD SPRING CLECO - MADE IN USA! | 3 | |
| K78010-72 | K 780;MAINS CABLE STRAIGHT LINE UK STANDARD PLUG | 5 | |
| KC10-7025-3 ASSEMBLY | CUSTOM MANUFACTURED BOEING REFERENCE STANDARD FOR ULTRASONIC INSPECTION 101/201 | 1 | |
| KC10-7027 | BOEING REFERENCE STANDARD KC10 FUEL COMPENSATOR CUTOUT-INSPECTION.( 301 GUIDE AND 302 GUIDE ARE PART OF INSPECTION AND SOLD SEPARATELY) | 1 | |
| KIT BOX | CASE FOR EDDY CURRENT STANDARD TOOL | 1 | |
| KR-C-WC | WATER RAM STANDARD WITH TOILET ATTACHMENT | 1 | |
| KT56778 | MESSIER-DOWTY REFERENCE STANDARD 631-32-181 2024-T3 | 1 | |
| KY | STANDARD SUPLERGRIP COUPLER | 1 | |
| L00-M4 | STANDARD CABLE | 1 | |
| L1-M4 | STANDARD CABLE | 1 | |
| L17-200 | WING COVERS, standard wingtip, WINTER USE (set of 2) | 1 | |
| L17-205 | WING COVERS, standard wingtip, ALL YEAR USE (set of 2) | 1 | |
| L1CM-74-1.2 | STANDARD CABLE | 1 | |
| L2220 | GREASE HOSES ( TYPE: STANDARD )( OVERALL LENGTH: 24" (60.9 CM) ) | 1 | |
| L2305 | Legacy L2305 LubeLink Standard Buttonhead Coupler, 4000 PSI, QuickConnect | 1 | |
| L90-210 | WING COVERS (STANDARD MODELS), WINTER USE (set of 2) | 1 | |
| L90-215 | WING COVERS (STANDARD MODELS), ALL YEAR USE (set of 2) | 1 | |
| LA-705T | TOP MOUNTED REFERENCE STANDARD 5 MHZ IN ALUMINIUM | 2 | |
| LA-705T 70A | TOP MOUNTED REFERENCE STANDARD 5 MHZ IN ALUMINIUM | 1 | |
| LAPTOP | STANDARD MAINTENANCE LAPTOP | 1 | |
| LASER12 | STANDARD ETCH UP TO 12 CHAR | 1 | |
| LASER12PLUS | STANDARD ETCH 12 - 15 CHAR | 1 | |
| LCB-74-4 | CABLE. STANDARD &LEMO TO BNC. 4. RG-174 | 2 | |
| LCLPD-78-5 | THICKNESS METER CABLE FOR OLYMPUS 38DL PLUS CABLE PART # LCLPD-78-5 – FOR USE WITH MTD705 TRANSDUCER, STANDARD TYPE, DUAL LEMO MOLDED PLUG TO LEPRA/CON. 5 FT. RG178 MAKE: EVIDENT (OLYMPUS) – USA | 1 | |
| LCM-74-1.2 | STANDARD CABLE | 1 | |
| LCM-74-3 | THICKNESS METER CABLE FOR OLYMPUS 38DL PLUS CABLE: CABLE PART # LCM-74-3 – FOR USE WITH M1016 TRANSDUCER, STANDARD TYPE, STANDARD LEMO TO MICRODOT. 3 FT. RG-174 MAKE: EVIDENT (OLYMPUS) – USA | 2 | |
| LCM-74-4 | CABLE, STANDARD LEMO TO MICRODOT. 4 FT. RG-175 | 1 | |
| LCM-74-6 | CABLE STANDARD LEMO TO MICRODOT | 1 | |
| LG-50KG | GAUGESTANDARD ACCESS | 8 | |
| LJ6130 | STANDARD RESISTOR | 1 | |
| LN-RB-53SPN-BC1 | LN-RB-53SPN-BC1;LN Rb SA.53 Standard PN Bronze Care - 1Yr - Up to 3Yr Duration | 1 | |
| LN-RB-55SPN-BC1 | LN-RB-55SPN-BC1;LN Rb SA.55 Standard PN Bronze Care - 1Yr - Up to 3Yr Duration | 1 | |
| LP404 | SET,LOCKING PLIERS, STANDARD GRIP, 4 PCS. | 3 | |
| LST51318 | U.S. STANDARD GAGE | 1 | |
| LTCT5511 | Wheel Standard Speed Pickup Test | 1 | |
| LTCT5511-01 | Standard Speed Pickup Test Wheel | 1 | |
| Level1 | STANDARD LEVEL 1 STAND MAINTENANCE | 1 | |
| Lucite Wedge 120P | Custom Lucite Wedge for Reference Standard 1. Material: Lucite/Cast Acrylic | 1 | |
| M1 PROB | M1 PROBE STANDARD REMOTE PROBE CABLE | 3 | |
| M1-G-KIT | STANDARD M1-G METER HAS GREEN DISPLAY WITH RESOLUTION OF 0.01 MILLIOHMS | 6 | |
| M1-PROB | STANDARD REMOTE PROB | 3 | |
| M1-Prob | M1 PROBE STANDARD REMOTE PROBE CABLE | 3 | |
| M1-TIPS-STD | STANDARD REPLACEMENT TIPS | 1 | |
| M103-SB | CONTACT TRANSDUCER, 1 MHZ, 0.50" ELEMENT DIAMETER, STANDARD CASE STYLE, STRAIGHT BNC CONNECTOR | 1 | |
| M20-115 | INSULATED ENGINE COVER, Fully Enclosed, standard windshield | 1 | |
| M46292 | "ADAPTOR OR SOCKET STANDARD WITH AN EXTENSION (320, 321) | 28 | |
| M90 | ULTRASONIC KIT ( TYPE M90) REFLECTROSCOPE WITH STANDARD PULSER/RECEIVER | 1 | |
| M9557-10 | MILITARY STANDARD MACHINE BOLT | 1 | |
| MA-705S 70A | SIDE MOUNTED REFERENCE STANDARD 5 MHZ IN ALUMINIUM | 1 | |
| MA40-13 | TRACTOR - CARGO - 4000 DRAW BAR PULL - DIESEL POWERED - STANDARD HEIGHT (FOR LOW PROFILE USE M1A SERIES) | 1 | |
| MA40-24 | TRACTOR - CARGO - 4000 DRAW BAR PULL - DIESEL POWERED - STANDARD HEIGHT (FOR LOW PROFILE USE M1A SERIES) | 1 | |
| MAB BLOCK-A | REFERENCE STANDARD ALUMINIUM 7075 T6-CONF ASTM E164 | 1 | |
| MAP-RM-C13456FP-M100-MFA | MAP-RM-C13456FP-M100-MFA;MAP-220 OCWR IL/RL Meter 1310/1490/1550/1625nm Standard FP laser SMF FC/APC | 1 | |
| MAP-RM-C13500FP-M100-MFA | MAP-RM-C13500FP-M100-MFA;MAP-220 OCWR IL/RL Meter 1310/1550nm Standard FP laser SMF FC/APC | 1 | |
| MAU-220 | WING COVERS (standard tip), WINTER USE (set of 2) | 1 | |
| MAU-225 | WING COVERS (standard tip), ALL YEAR USE (set of 2) | 1 | |
| MAU-901 | WINDSHIELD/SKYLIGHT HEATSHIELDS (Standard Skylight) (set of 2) | 1 | |
| MB12P-1 | STANDARD CIRCULAR CONNECTOR | 1 | |
| MBBRIIL80 | CALIBRATION STANDARD FOR RUDDER INSPECTION | 1 | |
| MD11-04-210 | McDONNELL DOUGLAS ULTRASONIC REFERENCE STANDARD (MDC-K225) FIGURE 1.29, PG.1 SECTION 2-1. Includes Test Report and Certificate of Conformance. | 1 | |
| MD11-04-325 | McDONNELL DOUGLAS ULTRASONIC REFERENCE STANDARD (MDC-K5225 FIGURE 1.30, PG.1 SECTION 2-1. Includes Test Report and Certificate of Conformance. | 1 | |
| MD11-04-400 | McDONNELL DOUGLAS ULTRASONIC REFERENCE STANDARD (MDC-K225) FIGURE 1.31, PG.1 SECTION 2-1. Includes Test Report and Certificate of Conformance. | 1 | |
| MD11-05a | SUBSURFACE AL ETLF STANDARD DM-11 SECTION 2-1 PG1 SHEET 1 | 1 | |
| MD11-05b | MD11 SUBSURFACE ALUMINUM ETLF REFERENCE STANDARD FIG 1.10 (Sheets 1-5) Section 2-1 Pages 1-5. Includes Test Report and Certificate of Conformance. | 1 | |
| MD11-05c | MD11 SUBSURFACE ALUMINUM ETLF REFERENCE STANDARD FIG 1.11 (Sheets 1-5) Section 2-1 Pages 1-5. Includes Test Report and Certificate of Conformance. | 1 | |
| MD11-09 | MD11 REFERENCE STANDARD MDC-K5225 SECTION 2-1 FIG 1.22. Includes Test Report and Certificate of Conformance. | 1 | |
| MD11-10 | McDONNELL DOUGLAS ULTRASONIC REFERENCE STANDARD (MDC-K5225 SECTION 2-1 PG.1 FIG.1.23.. 2024-T3 ALUMINUM | 1 | |
| MD11-11 | McDONNELL DOUGLAS ULTRASONIC REFERENCE STANDARD (MDC-K5225 FIGURE 1.27 SHEETS 1-6, PG.1-6 SECTION 2-1 | 1 | |
| MD11/57-10-25 | MD11 REFERENCE STANDARD 57-10-25 FIG 603 (Sheet 13) Page 618. Includes Test Report and Certificate of Conformance. | 1 | |
| MD900-600 | BLADE COVERS (standard type) (set of 5) | 1 | |
| MEN-14A-0401F | STANDARD NOSECAP ASSEMBLY | 1 | |
| MEN-14A-0423F | STANDARD NOSECAP ASSY | 1 | |
| MEN-14A-0601F | STANDARD NOSE CAL ASSEMBLY | 4 | |
| MEN-14A-0623F | STANDARD NOSECAP ASSEMBLY | 4 | |
| MEN-14A-0801F | STANDARD NOSECAP ASSEMBLY | 3 | |
| MEN-14A-0823F | STANDARD NOSECAP ASSEMBLY | 4 | |
| MEN-14A-1001F | STANDARD NOSE CAP ASSEMBLY | 3 | |
| MEN-14A-1023F | STANDARD NOSECAP ASSEMBLY | 2 | |
| MEN-14A-1223F | STANDARD NOSECAP ASSEMBLY | 2 | |
| MEN-14A-1423F | STANDARD NOSE CAP | 1 | |
| MEN-14A-1623F | STANDARD NOSECAP ASSY | 1 | |
| MEN-26C-2623F | STANDARD NOSECAP ASSEMBLY | 1 | |
| MEN14B1601F | STANDARD NOSE CAP | 2 | |
| MFCL150 | 1/4 STANDARD COUPLER | 1 | |
| MG0010G00131 | BOX ELECTROAVIONIC, STANDARD TOOLS | 1 | |
| MHS-10-1A-2 | 7075-T6 (BOLT HOLE STANDARD BLOCK FOR EDDY CURRENT INSPECTION) | 2 | |
| MHS-12-1A-0 | "EC REFERENCE STANDARD U8860405 | 1 | |
| MHS-12-1A-2 | ALUMINUM (7075-T6) MULTI-HOLE REFERENCE STANDARD WITH CERTIFICATE TRACEABLE TO NIST | 1 | |
| MHS-29-1A-0 | ROTATING PROBE TEST BLOCK, MULTIPLE HOLE STANDARD - 29 HOLES | 1 | |
| MHS29-1S0 | MULTIPOLE STANDARD FOR 0 1/8 ATE 3/4 ROTOTESTE | 1 | |
| MI-12-1.1 | STANDARD GAIN HORN | 1 | |
| MI121.1 | STANDARD GAIN HORN | 1 | |
| MIL-C-27500-AWG22 | STANDARD WIRE SHEILDED TWISTED PAIR PRICE PER FT | 1 | |
| MK7ATIS-002 | INFLATION KIT, TYRE, W/STANDARD REACH HOSE | 6 | |
| ML-01 | Cable, Standard 6-Foot long, Microdot / Lemo RG174 | 1 | |
| MOCETS-A4055S0-M100-MFA | MOCETS-A4055S0-M100-MFA;MAP-300 OCETS System 55 channel standard SM FC/APC | 1 | |
| MOCETS-A4055S0-M100-MNC | MOCETS-A4055S0-M100-MNC;MAP-300 OCETS System 55 channel standard SM no connector | 1 | |
| MOCETS-A4055S0-M101-MFA | MOCETS-A4055S0-M101-MFA;MAP-300 OCETS System 55 channel standard 50um MM FC/APC | 1 | |
| MOCETS-A4055S0-M101-MNC | MOCETS-A4055S0-M101-MNC;MAP-300 OCETS System 55 channel standard 50um MM no connector | 1 | |
| MOCETS-A4105S0-M100-MFA | MOCETS-A4105S0-M100-MFA;MAP-300 OCETS System 105 channel standard SM FC/APC | 1 | |
| MOCETS-A4105S0-M100-MNC | MOCETS-A4105S0-M100-MNC;MAP-300 OCETS System 105 channel standard SM no connector | 1 | |
| MOCETS-A4105S0-M101-MFA | MOCETS-A4105S0-M101-MFA;MAP-300 OCETS System 105 channel standard 50um MM FC/APC | 1 | |
| MOCETS-A4105S0-M101-MNC | MOCETS-A4105S0-M101-MNC;MAP-300 OCETS System 105 channel standard 50um MM no connector | 1 | |
| MOCETS-A4160S0-M100-MFA | MOCETS-A4160S0-M100-MFA;MAP-300 OCETS System 160 channel standard SM FC/APC | 1 | |
| MOCETS-A4160S0-M100-MNC | MOCETS-A4160S0-M100-MNC;MAP-300 OCETS System 160 channel standard SM no connector | 1 | |
| MOCETS-A4160S0-M101-MFA | MOCETS-A4160S0-M101-MFA;MAP-300 OCETS System 160 channel standard 50um MM FC/APC | 1 | |
| MOCETS-A4160S0-M101-MNC | MOCETS-A4160S0-M101-MNC;MAP-300 OCETS System 160 channel standard 50um MM no connector | 1 | |
| MOCETS-A4210S0-M100-MFA | MOCETS-A4210S0-M100-MFA;MAP-300 OCETS System 210 channel standard SM FC/APC | 1 | |
| MOCETS-A4210S0-M100-MNC | MOCETS-A4210S0-M100-MNC;MAP-300 OCETS System 210 channel standard SM no connector | 1 | |
| MOCETS-A4210S0-M101-MFA | MOCETS-A4210S0-M101-MFA;MAP-300 OCETS System 210 channel standard 50um MM FC/APC | 1 | |
| MOCETS-A4210S0-M101-MNC | MOCETS-A4210S0-M101-MNC;MAP-300 OCETS System 210 channel standard 50um MM no connector | 1 | |
| MOCETS-A4320S0-M100-MFA | MOCETS-A4320S0-M100-MFA;MAP-300 OCETS System 320 channel standard SM FC/APC | 1 | |
| MOCETS-A4320S0-M100-MNC | MOCETS-A4320S0-M100-MNC;MAP-300 OCETS System 320 channel standard SM no connector | 1 | |
| MOCETS-A4320S0-M101-MFA | MOCETS-A4320S0-M101-MFA;MAP-300 OCETS System 320 channel standard 50um MM FC/APC | 1 | |
| MOCETS-A4320S0-M101-MNC | MOCETS-A4320S0-M101-MNC;MAP-300 OCETS System 320 channel standard 50um MM no connector | 1 | |
| MPS43B-A0-B9-F3-K0 | Standard MPS43B Price Offering, Incl Wi-Fi | 1 | |
| MRC005574 | INDICATOR/REGISTER - MOISTURE, RADOME (MODEL A8AF) (115 V) (CONSISTS OF ELECTRODE GUN, METER, BATTERY, CHARGER/CALIBRATION STANDARD AND 3 FOOT CABLE) | 3 | |
| MRC006507 | INDICATOR/REGISTER - MOISTURE, RADOME (MODEL A8AF) (230 V) (CONSISTS OF ELECTRODE GUN, METER, BATTERY, CHARGER/CALIBRATION STANDARD AND 3 FOOT CABLE) | 5 | |
| MS20426D5-6 | CALIBRATION STANDARD RIVET | 1 | |
| MS21902J4 | STANDARD FITTING FOR COMBUSTOR DRAIN | 8 | |
| MS22058-1 | Military Standard MS22058-1 Adapter, Compressed Gas Cylinder Valve Connections | 2 | |
| MS25182-2 | STANDARD BATTERY DISCONNECT PLUG ASSY | 1 | |
| MS27215-1 | Military Standard MS27215-1 18mm (Non-Refillable) Dehydrator Spark Plug | 3 | |
| MS27215-2 | Military Standard MS27215-2 18mm (Refillable) Dehydrator Spark Plug | 5 | |
| MS28889-2 | MILITARY STANDARD MS28889-2 VALVE, PNEUMATIC TANK | 14 | |
| MS3160-20 | Military Standard MS3160-20 Inserter & Remover, Electrical Connector | 1 | |
| MS3396-12 | Military Standard MS3396-12 14mm Dehydrator Spark Plug | 2 | |
| MS35670-2A | Military Standard MS35670-2A Steel Valve, Safety Relief | 2 | |
| MS504 | MAINTENANCE PLATFORM STANDARD - RIGHT SIDE | 1 | |
| MS505 | MAINTENANCE PLATFORM STANDARD - LEFT SIDE | 1 | |
| MS9315-04 | STANDARD CAP FITTING | 1 | |
| MSL98370 | STANDARD COUPLER/ADAPTOR KIT | 1 | |
| MSRC-C21308FP-M101-MFP | MSRC-C21308FP-M101-MFP;850/1310nm Standard FP laser 50um MMF EF compliant FC/PC | 1 | |
| MSRC-C21308FPX-M101-MFP | MSRC-C21308FPX-M101-MFP;850/1310nm Standard FP laser Single output 50um MMF EF compliant FC/PC | 1 | |
| MSRC-C23456FP-M100-MFA | MSRC-C23456FP-M100-MFA;1310/1490/1550/1625nm Standard FP laser SMF FC/APC | 1 | |
| MSRC-C23456FPX-M100-MFA | MSRC-C23456FPX-M100-MFA;1310/1490/1550/1625nm Standard FP laser SMF Single output FC/APC | 1 | |
| MSRC-C23500FP-M100-MFA | MSRC-C23500FP-M100-MFA;1310/1550nm Standard FP laser SMF FC/APC | 1 | |
| MSRC-C23500FPX-M100-MFA | MSRC-C23500FPX-M100-MFA;1310/1550nm Standard FP laser SMF Single output FC/APC | 1 | |
| MT1462 | STANDARD VALVE CORE BIT DRIVER | 1 | |
| MVIQKP4020 | STANDARD DEFINITION MVIQ+INTERCHANGEABLE VIDEOPROBE | 1 | |
| MVIQKP4030 | 4.0MM X 3.0M STANDARD DEFINITION MVIQ INTERCHANGEABLE VIDEOPROBE | 1 | |
| MVOA-C1DS0-M100-MFA | MVOA-C1DS0-M100-MFA;DUAL VOA STANDARD POWER NO OPTION SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1DS0-M100-MFP | MVOA-C1DS0-M100-MFP;DUAL VOA STANDARD POWER NO OPTION SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1DS0-M100-MLC | MVOA-C1DS0-M100-MLC;DUAL VOA STANDARD POWER NO OPTION SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1DS0-M100-MLU | MVOA-C1DS0-M100-MLU;DUAL VOA STANDARD POWER NO OPTION SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1DS0-M100-MSC | MVOA-C1DS0-M100-MSC;DUAL VOA STANDARD POWER NO OPTION SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1DS0-M100-MSU | MVOA-C1DS0-M100-MSU;DUAL VOA STANDARD POWER NO OPTION SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1DS0-M101-MFA | MVOA-C1DS0-M101-MFA;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM FC/APC | 1 | |
| MVOA-C1DS0-M101-MFP | MVOA-C1DS0-M101-MFP;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM FC/PC | 1 | |
| MVOA-C1DS0-M101-MLC | MVOA-C1DS0-M101-MLC;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM LC/PC | 1 | |
| MVOA-C1DS0-M101-MLU | MVOA-C1DS0-M101-MLU;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM LC/APC | 1 | |
| MVOA-C1DS0-M101-MSC | MVOA-C1DS0-M101-MSC;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM SC/PC | 1 | |
| MVOA-C1DS0-M101-MSU | MVOA-C1DS0-M101-MSU;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM SC/APC | 1 | |
| MVOA-C1DS0-M102-MFA | MVOA-C1DS0-M102-MFA;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM FC/APC | 1 | |
| MVOA-C1DS0-M102-MFP | MVOA-C1DS0-M102-MFP;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM FC/PC | 1 | |
| MVOA-C1DS0-M102-MLC | MVOA-C1DS0-M102-MLC;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM LC/PC | 1 | |
| MVOA-C1DS0-M102-MLU | MVOA-C1DS0-M102-MLU;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM LC/APC | 1 | |
| MVOA-C1DS0-M102-MSC | MVOA-C1DS0-M102-MSC;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM SC/PC | 1 | |
| MVOA-C1DS0-M102-MSU | MVOA-C1DS0-M102-MSU;DUAL VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM SC/APC | 1 | |
| MVOA-C1DS1-M100-MFA | MVOA-C1DS1-M100-MFA;DUAL VOA STANDARD POWER TAP SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1DS1-M100-MFP | MVOA-C1DS1-M100-MFP;DUAL VOA STANDARD POWER TAP SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1DS1-M100-MLC | MVOA-C1DS1-M100-MLC;DUAL VOA STANDARD POWER TAP SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1DS1-M100-MLU | MVOA-C1DS1-M100-MLU;DUAL VOA STANDARD POWER TAP SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1DS1-M100-MSC | MVOA-C1DS1-M100-MSC;DUAL VOA STANDARD POWER TAP SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1DS1-M100-MSU | MVOA-C1DS1-M100-MSU;DUAL VOA STANDARD POWER TAP SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1DSM-M100-MFA | MVOA-C1DSM-M100-MFA;DUAL VOA STANDARD POWER MONITOR SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1DSM-M100-MFP | MVOA-C1DSM-M100-MFP;DUAL VOA STANDARD POWER MONITOR SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1DSM-M100-MLC | MVOA-C1DSM-M100-MLC;DUAL VOA STANDARD POWER MONITOR SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1DSM-M100-MLU | MVOA-C1DSM-M100-MLU;DUAL VOA STANDARD POWER MONITOR SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1DSM-M100-MSC | MVOA-C1DSM-M100-MSC;DUAL VOA STANDARD POWER MONITOR SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1DSM-M100-MSU | MVOA-C1DSM-M100-MSU;DUAL VOA STANDARD POWER MONITOR SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1DSM-M101-MFA | MVOA-C1DSM-M101-MFA;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM FC/APC | 1 | |
| MVOA-C1DSM-M101-MFP | MVOA-C1DSM-M101-MFP;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM FC/PC | 1 | |
| MVOA-C1DSM-M101-MLC | MVOA-C1DSM-M101-MLC;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM LC/PC | 1 | |
| MVOA-C1DSM-M101-MLU | MVOA-C1DSM-M101-MLU;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM LC/APC | 1 | |
| MVOA-C1DSM-M101-MSC | MVOA-C1DSM-M101-MSC;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM SC/PC | 1 | |
| MVOA-C1DSM-M101-MSU | MVOA-C1DSM-M101-MSU;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM SC/APC | 1 | |
| MVOA-C1DSM-M102-MFA | MVOA-C1DSM-M102-MFA;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM FC/APC | 1 | |
| MVOA-C1DSM-M102-MFP | MVOA-C1DSM-M102-MFP;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM FC/PC | 1 | |
| MVOA-C1DSM-M102-MLC | MVOA-C1DSM-M102-MLC;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM LC/PC | 1 | |
| MVOA-C1DSM-M102-MLU | MVOA-C1DSM-M102-MLU;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM LC/APC | 1 | |
| MVOA-C1DSM-M102-MSC | MVOA-C1DSM-M102-MSC;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM SC/PC | 1 | |
| MVOA-C1DSM-M102-MSU | MVOA-C1DSM-M102-MSU;DUAL VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM SC/APC | 1 | |
| MVOA-C1QS0-M100-MFA | MVOA-C1QS0-M100-MFA;QUAD VOA STANDARD POWER NO OPTION SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1QS0-M100-MFP | MVOA-C1QS0-M100-MFP;QUAD VOA STANDARD POWER NO OPTION SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1QS0-M100-MLC | MVOA-C1QS0-M100-MLC;QUAD VOA STANDARD POWER NO OPTION SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1QS0-M100-MLU | MVOA-C1QS0-M100-MLU;QUAD VOA STANDARD POWER NO OPTION SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1QS0-M100-MSC | MVOA-C1QS0-M100-MSC;QUAD VOA STANDARD POWER NO OPTION SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1QS0-M100-MSU | MVOA-C1QS0-M100-MSU;QUAD VOA STANDARD POWER NO OPTION SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1QS0-M101-MFA | MVOA-C1QS0-M101-MFA;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM FC/APC | 1 | |
| MVOA-C1QS0-M101-MFP | MVOA-C1QS0-M101-MFP;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM FC/PC | 1 | |
| MVOA-C1QS0-M101-MLC | MVOA-C1QS0-M101-MLC;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM LC/PC | 1 | |
| MVOA-C1QS0-M101-MLU | MVOA-C1QS0-M101-MLU;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM LC/APC | 1 | |
| MVOA-C1QS0-M101-MSC | MVOA-C1QS0-M101-MSC;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM SC/PC | 1 | |
| MVOA-C1QS0-M101-MSU | MVOA-C1QS0-M101-MSU;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM SC/APC | 1 | |
| MVOA-C1QS0-M102-MFA | MVOA-C1QS0-M102-MFA;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM FC/APC | 1 | |
| MVOA-C1QS0-M102-MFP | MVOA-C1QS0-M102-MFP;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM FC/PC | 1 | |
| MVOA-C1QS0-M102-MLC | MVOA-C1QS0-M102-MLC;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM LC/PC | 1 | |
| MVOA-C1QS0-M102-MLU | MVOA-C1QS0-M102-MLU;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM LC/APC | 1 | |
| MVOA-C1QS0-M102-MSC | MVOA-C1QS0-M102-MSC;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM SC/PC | 1 | |
| MVOA-C1QS0-M102-MSU | MVOA-C1QS0-M102-MSU;QUAD VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM SC/APC | 1 | |
| MVOA-C1QS1-M100-MFA | MVOA-C1QS1-M100-MFA;QUAD VOA STANDARD POWER TAP SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1QS1-M100-MFP | MVOA-C1QS1-M100-MFP;QUAD VOA STANDARD POWER TAP SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1QS1-M100-MLC | MVOA-C1QS1-M100-MLC;QUAD VOA STANDARD POWER TAP SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1QS1-M100-MLU | MVOA-C1QS1-M100-MLU;QUAD VOA STANDARD POWER TAP SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1QS1-M100-MSC | MVOA-C1QS1-M100-MSC;QUAD VOA STANDARD POWER TAP SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1QS1-M100-MSU | MVOA-C1QS1-M100-MSU;QUAD VOA STANDARD POWER TAP SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1QSM-M100-MFA | MVOA-C1QSM-M100-MFA;QUAD VOA STANDARD POWER MONITOR SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1QSM-M100-MFP | MVOA-C1QSM-M100-MFP;QUAD VOA STANDARD POWER MONITOR SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1QSM-M100-MLC | MVOA-C1QSM-M100-MLC;QUAD VOA STANDARD POWER MONITOR SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1QSM-M100-MLU | MVOA-C1QSM-M100-MLU;QUAD VOA STANDARD POWER MONITOR SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1QSM-M100-MSC | MVOA-C1QSM-M100-MSC;QUAD VOA STANDARD POWER MONITOR SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1QSM-M100-MSU | MVOA-C1QSM-M100-MSU;QUAD VOA STANDARD POWER MONITOR SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1QSM-M101-MFA | MVOA-C1QSM-M101-MFA;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM FC/APC | 1 | |
| MVOA-C1QSM-M101-MFP | MVOA-C1QSM-M101-MFP;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM FC/PC | 1 | |
| MVOA-C1QSM-M101-MLC | MVOA-C1QSM-M101-MLC;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM LC/PC | 1 | |
| MVOA-C1QSM-M101-MLU | MVOA-C1QSM-M101-MLU;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM LC/APC | 1 | |
| MVOA-C1QSM-M101-MSC | MVOA-C1QSM-M101-MSC;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM SC/PC | 1 | |
| MVOA-C1QSM-M101-MSU | MVOA-C1QSM-M101-MSU;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM SC/APC | 1 | |
| MVOA-C1QSM-M102-MFA | MVOA-C1QSM-M102-MFA;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM FC/APC | 1 | |
| MVOA-C1QSM-M102-MFP | MVOA-C1QSM-M102-MFP;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM FC/PC | 1 | |
| MVOA-C1QSM-M102-MLC | MVOA-C1QSM-M102-MLC;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM LC/PC | 1 | |
| MVOA-C1QSM-M102-MLU | MVOA-C1QSM-M102-MLU;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM LC/APC | 1 | |
| MVOA-C1QSM-M102-MSC | MVOA-C1QSM-M102-MSC;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM SC/PC | 1 | |
| MVOA-C1QSM-M102-MSU | MVOA-C1QSM-M102-MSU;QUAD VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM SC/APC | 1 | |
| MVOA-C1SS0-M100-MFA | MVOA-C1SS0-M100-MFA;SINGLE VOA STANDARD POWER NO OPTION SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1SS0-M100-MFP | MVOA-C1SS0-M100-MFP;SINGLE VOA STANDARD POWER NO OPTION SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1SS0-M100-MLC | MVOA-C1SS0-M100-MLC;SINGLE VOA STANDARD POWER NO OPTION SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1SS0-M100-MLU | MVOA-C1SS0-M100-MLU;SINGLE VOA STANDARD POWER NO OPTION SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1SS0-M100-MSC | MVOA-C1SS0-M100-MSC;SINGLE VOA STANDARD POWER NO OPTION SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1SS0-M100-MSU | MVOA-C1SS0-M100-MSU;SINGLE VOA STANDARD POWER NO OPTION SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1SS0-M101-MFA | MVOA-C1SS0-M101-MFA;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM FC/APC | 1 | |
| MVOA-C1SS0-M101-MFP | MVOA-C1SS0-M101-MFP;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM FC/PC | 1 | |
| MVOA-C1SS0-M101-MLC | MVOA-C1SS0-M101-MLC;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM LC/PC | 1 | |
| MVOA-C1SS0-M101-MLU | MVOA-C1SS0-M101-MLU;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM LC/APC | 1 | |
| MVOA-C1SS0-M101-MSC | MVOA-C1SS0-M101-MSC;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM SC/PC | 1 | |
| MVOA-C1SS0-M101-MSU | MVOA-C1SS0-M101-MSU;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 50UM SC/APC | 1 | |
| MVOA-C1SS0-M102-MFA | MVOA-C1SS0-M102-MFA;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM FC/APC | 1 | |
| MVOA-C1SS0-M102-MFP | MVOA-C1SS0-M102-MFP;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM FC/PC | 1 | |
| MVOA-C1SS0-M102-MLC | MVOA-C1SS0-M102-MLC;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM LC/PC | 1 | |
| MVOA-C1SS0-M102-MLU | MVOA-C1SS0-M102-MLU;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM LC/APC | 1 | |
| MVOA-C1SS0-M102-MSC | MVOA-C1SS0-M102-MSC;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM SC/PC | 1 | |
| MVOA-C1SS0-M102-MSU | MVOA-C1SS0-M102-MSU;SINGLE VOA STANDARD POWER NO OPTION MULTIMODE FIBER 62UM SC/APC | 1 | |
| MVOA-C1SS1-M100-MFA | MVOA-C1SS1-M100-MFA;SINGLE VOA STANDARD POWER TAP SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1SS1-M100-MFP | MVOA-C1SS1-M100-MFP;SINGLE VOA STANDARD POWER TAP SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1SS1-M100-MLC | MVOA-C1SS1-M100-MLC;SINGLE VOA STANDARD POWER TAP SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1SS1-M100-MLU | MVOA-C1SS1-M100-MLU;SINGLE VOA STANDARD POWER TAP SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1SS1-M100-MSC | MVOA-C1SS1-M100-MSC;SINGLE VOA STANDARD POWER TAP SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1SS1-M100-MSU | MVOA-C1SS1-M100-MSU;SINGLE VOA STANDARD POWER TAP SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1SSM-M100-MFA | MVOA-C1SSM-M100-MFA;SINGLE VOA STANDARD POWER MONITOR SINGLE MODE FIBERFC/APC | 1 | |
| MVOA-C1SSM-M100-MFP | MVOA-C1SSM-M100-MFP;SINGLE VOA STANDARD POWER MONITOR SINGLE MODE FIBERFC/PC | 1 | |
| MVOA-C1SSM-M100-MLC | MVOA-C1SSM-M100-MLC;SINGLE VOA STANDARD POWER MONITOR SINGLE MODE FIBERLC/PC | 1 | |
| MVOA-C1SSM-M100-MLU | MVOA-C1SSM-M100-MLU;SINGLE VOA STANDARD POWER MONITOR SINGLE MODE FIBERLC/APC | 1 | |
| MVOA-C1SSM-M100-MSC | MVOA-C1SSM-M100-MSC;SINGLE VOA STANDARD POWER MONITOR SINGLE MODE FIBERSC/PC | 1 | |
| MVOA-C1SSM-M100-MSU | MVOA-C1SSM-M100-MSU;SINGLE VOA STANDARD POWER MONITOR SINGLE MODE FIBERSC/APC | 1 | |
| MVOA-C1SSM-M101-MFA | MVOA-C1SSM-M101-MFA;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM FC/APC | 1 | |
| MVOA-C1SSM-M101-MFP | MVOA-C1SSM-M101-MFP;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM FC/PC | 1 | |
| MVOA-C1SSM-M101-MLC | MVOA-C1SSM-M101-MLC;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM LC/PC | 1 | |
| MVOA-C1SSM-M101-MLU | MVOA-C1SSM-M101-MLU;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM LC/APC | 1 | |
| MVOA-C1SSM-M101-MSC | MVOA-C1SSM-M101-MSC;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM SC/PC | 1 | |
| MVOA-C1SSM-M101-MSU | MVOA-C1SSM-M101-MSU;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 50UM SC/APC | 1 | |
| MVOA-C1SSM-M102-MFA | MVOA-C1SSM-M102-MFA;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM FC/APC | 1 | |
| MVOA-C1SSM-M102-MFP | MVOA-C1SSM-M102-MFP;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM FC/PC | 1 | |
| MVOA-C1SSM-M102-MLC | MVOA-C1SSM-M102-MLC;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM LC/PC | 1 | |
| MVOA-C1SSM-M102-MLU | MVOA-C1SSM-M102-MLU;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM LC/APC | 1 | |
| MVOA-C1SSM-M102-MSC | MVOA-C1SSM-M102-MSC;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM SC/PC | 1 | |
| MVOA-C1SSM-M102-MSU | MVOA-C1SSM-M102-MSU;SINGLE VOA STANDARD POWER MONITOR MULTIMODE FIBER 62UM SC/APC | 1 | |
| NAS1756-24 | National Aerospace Standard NAS1756-24 Red-White 24" Remove Before Flight Streamer | 23 | |
| NAS1756-36 | National Aerospace Standard NAS1756-36 Red-White 36' Remove Before Flight Streamer | 20 | |
| NDETECH-7515 | CALIBRATION BLOCK STAINLESS STEEL SURFACE REFERENCE STANDARD 304 STAINLESS STEEL. | 1 | |
| NDT 1017 | BOEING REFERENCE STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 1039-0.040/0.020 | REFERENCE STANDARD BOND TEST INS | 2 | |
| NDT 1039-0.040/0.040 | REFERENCE STANDARD BOND TEST INS | 2 | |
| NDT 1039-0.050/0.040 | REFERENCE STANDARD BOND TEST INS | 2 | |
| NDT 1039-0.063/0.056 | REFERENCE STANDARD BOND TEST INS | 2 | |
| NDT 1086-040 | BOEING REFERENCE STANDARD NDT1086-040 767 PT 4 53-00-01 AND 747 PT 4 53-30-05 | 3 | |
| NDT 1086-070 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 AND 737 53-30-05. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 1086-080 | Reference Standard NDT 1086-080 | 3 | |
| NDT 1086-090 | Reference Standard NDT 1086-090 | 3 | |
| NDT 1086-100 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 AND 737 53-30-05. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 1086-110 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 AND 737 53-30-05. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 1086-120 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 AND 737 53-30-05. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 1087- 3 | BOEING REFERENCE STANDARD 737 PT 6 53-30-00 | 3 | |
| NDT 194B | Boeing Reference standard w/Certs | 2 | |
| NDT 2797 | EMBRAER 170 REFERENCE STANDARD PT 6 53-10-00 pages 4-8 figure 1 sheets 1 and 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT 3065 | BOEING REFERENCE STANDARD 767 PT 6 53-00-12 FIG 2.707, 727, 737, 747 AIRCRAFTS; PART 6, 53-30-22. ON 737 AIRCRAFT; PART 4, 53-30-06. ON 757, 767 AIRCRAFTS; PART 6, 53-00-09. ON 777 AIRCRAFT; PART 6,53-00-07. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORM | 3 | |
| NDT 3087R&D | NDT 3087 Reference Standard R&D | 1 | |
| NDT 3116 | BOEING REFERENCE STANDARD 737 PT 4 53-10-06 FIG 2. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 3141 | BOEING REFERENCE STANDARD 737 PART 4 55-10-13 PAGE | 2 | |
| NDT 3152- A | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 3152- F | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 3152- K | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 3156 | BOEING REFERENCE STANDARD 737 PART 6 57-10-60 PAGE 11 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 4 | |
| NDT 3164 | BOEING REFERENCE STANDARD 737 PART 6 57-10-60 PAGE 11 FIGURE 2. MATERIAL: 7150-T7. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 3166- 007 | BOEING REFERENCE STANDARD 737 PART 4 57-10-08 PAGE 6 FIGURE 2. MATERIAL: AIRCRAFT QUALITY ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 4 | |
| NDT 3170 | 737 reference standard NDT 3170 | 5 | |
| NDT 3171 | BOEING STANDARD 737 PT4 57-10-06 | 5 | |
| NDT 3172 | BOEING STANDARD 737 PT4 57-10-05 PG 14 FG 2 | 3 | |
| NDT 3285 | BOEING REFERENCE STANDARD 737 PART 6 53-30-63 PAGE 11 FIGURE 2. MATERIAL: 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 3289 | BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 3293 | BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 3299 | BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 396 | BOEING REFERENCE STANDARD 737 PT 6 53-30-09 FIG 2.( NOTE: MATERIAL THICKNESS FOR THIS STANDARD IS .036"/.036"). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 6 | |
| NDT 398 | BOEING REFERENCE STANDARD 737 PT 4 53-10-01. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 5203 | Wing Front Spar Standard ID # R0059591 | 1 | |
| NDT 5204 | wing front Spar Standard ID# R0059592 | 1 | |
| NDT 5205 | wing Front Spar Standard ID# R0059593 | 1 | |
| NDT 5206 | Wing rear Spar Standard ID# R0061094 | 1 | |
| NDT 5207 | wing Rear Spar Standard ID# R0061095 | 1 | |
| NDT 5208 | Wing Rear Spar Standard ID# R61096 | 1 | |
| NDT 6001 | Boeing Steel Reference Standard w/certs | 2 | |
| NDT 6018 | Boeing Titanium Reference Standard w/certs | 2 | |
| NDT-102 | Boeing Standard INC 625 customer supplies material | 1 | |
| NDT-103 | Boeing Standard AL | 1 | |
| NDT-1039-.040-.056 | Reference Standard NDT-1039-.040-.056 | 1 | |
| NDT-1039-.040-.080 | Reference Standard NDT-1039-.040-.080 | 1 | |
| NDT-1039-.050-.080 | Reference Standard NDT-1039-.050-.080 | 1 | |
| NDT-1048 | Reference Standard NDT-1048 | 4 | |
| NDT-1069A | Reference Standard NDT-1069A | 1 | |
| NDT-1069B | Reference Standard NDT-1069B | 1 | |
| NDT-1086-032 | Reference Standard NDT-1086-032 | 3 | |
| NDT-1086-050 | Reference Standard NDT-1086-050 | 3 | |
| NDT-1086-060 | Reference Standard NDT-1086-060 | 3 | |
| NDT-1086-070 | Reference Standard NDT-1086-070 | 3 | |
| NDT-1086-080 | Reference Standard NDT-1086-080 | 3 | |
| NDT-1086-090 | Reference Standard NDT-1086-090 | 3 | |
| NDT-1086-100 | Reference Standard NDT-1086-100 | 3 | |
| NDT-1086-110 | Reference Standard NDT-1086-110 | 3 | |
| NDT-1086-120 | Reference Standard NDT-1086-120 | 3 | |
| NDT-1094-040 | Reference Standard NDT-1094-040 | 2 | |
| NDT-1094-050 | Reference Standard NDT-1094-050 | 2 | |
| NDT-1094-070 | Reference Standard NDT-1094-070 | 2 | |
| NDT-1094-090 | Reference Standard NDT-1094-090 | 2 | |
| NDT-1094-110 | Reference Standard NDT-1094-110 | 1 | |
| NDT-1094-110-A | BOEING REFERENCE STANDARD 737 PART 4 53-30-07, 757 PART 4 53-00-02 FIG 2, 777 PART 4 53-00-02 PAGE 34 FIGURE 2. MATERIAL: ALUMINUM. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMAN | 2 | |
| NDT-1094-130-A | BOEING REFERENCE STANDARD 737 PART 4 53-30-07, 757 PART 4 53-00-02 FIG 2, 777 PART 4 53-00-02 PAGE 34 FIGURE 2. MATERIAL: ALUMINUM. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMAN | 2 | |
| NDT-1094-40 | REFERENCE STANDARD BOEING 737 | 2 | |
| NDT-1094-40-A | REFERENCE STANDARD BOEING 737 | 2 | |
| NDT-3005 | Reference Standard NDT 3005 | 1 | |
| NDT-3007 | Reference Standard NDT 3007 | 1 | |
| NDT-3014B | Eddy current standard set | 1 | |
| NDT-3015 | Reference Standard NDT-3015 | 2 | |
| NDT-3021 | REFERENCE STANDARD B737 PT.6 7-50-01 | 6 | |
| NDT-3050 | Ref Standard NDT-3050,B737 53-30-20 | 4 | |
| NDT-3065 | REFERENCE STANDARD NDT-3065 | 3 | |
| NDT-3065-STL | REFERENCE STANDARD NDT-3065-STL | 2 | |
| NDT-3091 | Reference Standard NDT-3091 | 2 | |
| NDT001-767T | Boeing Standard Part 6 53-60-94 pg 5 | 1 | |
| NDT002-767T | Boeing standard 6 52-30-92 Page 7 | 1 | |
| NDT006 | NDT REFERENCE STANDARD BOEING 767 | 1 | |
| NDT007-767T | Boeing Standard Part 6 53-80-93 pg 6 | 1 | |
| NDT009-767T | Boeing Standard Part 6 53-80-93 pg 4 | 1 | |
| NDT055 | Boeing Standard 57-10-07 PT6 PG677 | 1 | |
| NDT056 | Boeing Standard 57-10-07 PT6 PG678 | 1 | |
| NDT1016 | Boeing Standard .188" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 3 | |
| NDT1017 | Boeing Standard .250" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 2 | |
| NDT1018 | Boeing Standard .313" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 3 | |
| NDT1019 | Boeing Standard .375" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 3 | |
| NDT1020 | Boeing Standard .438" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 2 | |
| NDT1021 | Boeing Standard .500" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 2 | |
| NDT1022 | BOEING REFERENCE STANDARD PT 6 51-00-00 | 3 | |
| NDT1022-27/6 | BOEING REFERENCE STANDARD 767 51-00-14 PT 6 FIG 3, 757 Part 6 51-00-14 Page 8 Figure 3. SINGLE STANDARD WITH ALL SIX HOLES. MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1023 | BOEING REFERENCE STANDARD PT 6 51-00-00 | 2 | |
| NDT1024 | BOEING REFERENCE STANDARD PT 6 51-00-00 | 2 | |
| NDT1025 | BOEING REFERENCE STANDARD PT 6 51-00-00 | 2 | |
| NDT1026 | BOEING REFERENCE STANDARD PT 6 51-00-00 | 2 | |
| NDT1027 | BOEING REFERENCE STANDARD PT 6 51-00-00 | 2 | |
| NDT1027-.188/.500 | CUSTOM TITANIUM EDDY CURRENT MULTI HOLE STANDARD WHICH COMBINES BOEING PART NUMBERS NDT1022-NDT1027 STANDARDS INTO ONE PART..HOLE SIZES ( 0.188", 0.250", 0.313", 0.375",0.438", 0.500" ). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT1031 | BOEING 707 REFERENCE STANDARD 707 PART 6, 57-10-07 DETAIL 2 FIGURE 93 SHEET 7 PG.1525. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1033-10 | ALUMINUM TO ALUMINUM SKIN REFERENCE STANDARD WITH A TOTAL OF 10 BONDED SHIMS .016"-.125" THICK. 100 THICKNESS COMBINATIONS WITH SIMULATED DISBOND DEFECTS. PART 4 51-00-01 | 4 | |
| NDT1037-0.032 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.036 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.040 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.050 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.063 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.072 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.080 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.090 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.100 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.110 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.125 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1038 | Reference Standard NDT1038 | 3 | |
| NDT1039-.016/.020 | Boeing Reference Standard 737 PT4 53-30-01 PG5 FIG2 | 1 | |
| NDT1039-.025/.025 | Boeing Reference Standard 737 PT4 53-30-01 PG5 FIG2 | 1 | |
| NDT1039-.050/.080 | Boeing Reference Standard 737 PT4 53-30-01 PG5 FIG2 | 1 | |
| NDT1039-.080/.025 | Boeing Reference Standard 737 PT4 53-30-01 PG5 FIG2 | 1 | |
| NDT1039-.080/.100 | Boeing Reference Standard 737 PT4 53-30-01 PG5 FIG2 | 1 | |
| NDT1039-0.016/0.016 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.016". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.016/0.020 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.020". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.016/0.025 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.025". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.016/0.100 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.100". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.020/0.020 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.016". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.020/0.025 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.020"/0.025". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.020/0.032 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.020"/0.032". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.025/0.025 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.030/0.030 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.030"/0.030". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.032/0.032 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.032"/0.032". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.032/0.036 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.032/0.050 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.032"/0.050". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.036/0.036 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.040/0.020 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1039-0.040/0.032 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.040/0.036 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.040/0.040 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1039-0.040/0.050 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.040"/0.050". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.040/0.056 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.045/0.040 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.050/0.040 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1039-0.050/0.056 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.050/0.063 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.050/0.080 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.063/0.040 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.063/0.056 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1039-0.063/0.063 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.063/0.080 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 PAGE 5 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.071/0.063 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.080/0.025 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.080/0.063 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1039-0.080/0.100 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-T1/T2 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1039-t1/t2 | Boeing Standard 737 PT4 51-00-05 PG 7..*t1 & t2 are material thickness, customer must provide thickness dimensions | 2 | |
| NDT1040 | Boeing Standard 0.188" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
| NDT1041 | Boeing Standard 0.250" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
| NDT1042 | Boeing Standard 0.313" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
| NDT1043 | Boeing Standard 0.375" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
| NDT1043CS | BOEING COUNTERSINK REFERENCE STANDARD 737 PT6 51-00-00 PROCEDURE 19, 0.375” DIAMETER 100° COUNTERSINK HOLE. MATERIAL: 43404340M STEEL. SIZE: 2.0" X .375" THICK( ROUNDSQUARE. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT1044 | Boeing Standard 0.438" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
| NDT1045 | Boeing Standard 0.500" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
| NDT1047 | BOEING 737 REFERENCE STANDARD PART 6 51-00-00 PAGE 5 FIGURE 1. MATERIAL: LOW ALLOY 4000 SERIES STEEL 4130. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1048 | standard number NDT1048 | 4 | |
| NDT1061 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG 13. Includes Test Report and Certificte of Conformance. | 2 | |
| NDT1062 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG 24. Includes Test Report and Certificte of Conformance. | 2 | |
| NDT1069A | BOEING REFERENCE STANDARD 737 pt 6 53-30-19 FIGURE 3 SHEET 1 PAGE 9. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1069A-0.010 DEEP | Boeing Standard w/ 0.010 deep notch | 1 | |
| NDT1069B | BOEING REFERENCE STANDARD 737 PT 6 53-30-19 FIGURE 3 SHEET 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1071 | BOEING REFERENCE STANDARD 767 Part 4 51-00-22 Page 4 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1072 | BOEING REFERENCE STANDARD PT 6, 51-00-00 fig. 13 PG.11 . MATERIAL-301 1/2 HARD. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1073 | BOEING REFERENCE STANDARD Part 6 51-00-00 Page 12 Figure 13. Material:4130 or 4340. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1074 | BOEING REFERENCE STANDARD Part 6 51-00-00 Page 11 Figure 24. Material: 304 1/2 Hard. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1075 | BOEING REFERENCE STANDARD Part 6 51-00-00 Page 14 Figure 13. Material: 301 1/2 Hard. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1079 | Reference Standard NDT1079 | 1 | |
| NDT1083 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1083-.157 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-.188 | Boeing Standard 757 PT6 51-00-17 PG 7 | 1 | |
| NDT1083-.250 | Boeing Standard 757 PT6 51-00-17 PG 7 | 1 | |
| NDT1083-.313 | Boeing Standard 757 PT6 51-00-17 PG 7 | 1 | |
| NDT1083-.375 | Boeing Standard 757 PT6 51-00-17 PG 7 | 1 | |
| NDT1083-.438 | Boeing Standard 757 PT6 51-00-17 PG 7 | 1 | |
| NDT1083-.500 | Boeing Standard 757 PT6 51-00-17 PG 7 | 1 | |
| NDT1083-.5625 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-.625 | Boeing Standard 757 PT6 51-00-17 PG 7 | 1 | |
| NDT1083-.630 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-.750 | Boeing Standard 757 PT6 51-00-17 PG7 | 1 | |
| NDT1083-.812 | REFERENCE STANDARD (0.812 INCH) | 1 | |
| NDT1083-.851 | Boeing Standard .851 PT6 51-00-00:FIG19 PG10 DetailIII | 1 | |
| NDT1083-.875 | Boeing Standard 757 PT6 51-00-17 PG6 | 1 | |
| NDT1083-0.5620 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.563 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.625 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.630 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.688 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.695 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.750 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 2 | |
| NDT1083-0.787 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.812 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.813 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.875 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.938 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-1.00 | Boeing Standard 1.0", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
| NDT1083-1.000 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-1.1875 | Boeing Standard 1.1875", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII | 1 | |
| NDT1083-1.19 | Boeing Standard 1.19", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII | 1 | |
| NDT1083-1.25 | Boeing Standard 1.25", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
| NDT1083-1.286 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-1.347 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-3.2/8.7 | REFERENCE STANDARD BOEING 12 HOLE | 1 | |
| NDT1083.157 | Boeing Reference Standard 0.157" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 1 | |
| NDT1083.219 | Boeing Reference Standard 0.219" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 1 | |
| NDT1083.282 | Boeing Reference Standard 0.282" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 1 | |
| NDT1083.344 | Boeing Reference Standard 0.344" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 1 | |
| NDT1083.407 | Boeing Reference Standard 0.407" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 1 | |
| NDT1083.469 | Boeing Reference Standard 0.469" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 1 | |
| NDT1083.516 | Boeing Reference Standard 0.516" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 1 | |
| NDT1083.5625 | Boeing Standard 0.5625", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
| NDT1083.563 | Boeing Standard 0.563", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
| NDT1083.625 | Boeing Standard 0.625", 737/747 PT6 51-00-00:FIG19 PG10 Detail III or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
| NDT1083.6875 | Boeing Standard 0.6875", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
| NDT1083.750 | Boeing Standard 0.750", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
| NDT1083.875 | Boeing Standard 0.875", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
| NDT1084 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-.096 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-.125 | Boeing Standard .125 hole 737/747 PT 6 51-00-00 PH10 FIG 16 DETAIL III | 2 | |
| NDT1084-.129 | Boeing Standard 767 Part 6 51-00-16 page 7 | 1 | |
| NDT1084-.156 | Boeing Standard .156" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 1 | |
| NDT1084-.157 | Boeing Standard .157" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 2 | |
| NDT1084-.161 | Boeing Standard 767 PART6, 51-00-16..page 7 | 1 | |
| NDT1084-.218 | Boeing Standard .218: Hole,737/747 PT6 51-00-00: PG 10 FIG 16 DETAIL III | 1 | |
| NDT1084-.265 | Boeing Standard 767 Part 6 51-00-16 page 7 | 1 | |
| NDT1084-.281 | Boeing Standard 767 Part 6 51-00-16 Page 7 | 1 | |
| NDT1084-.562 | Boeing Standard .562" Hole, 737/747 PT6 51-00-00: PG10 FIG16 DETAIL III | 1 | |
| NDT1084-.5625 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-.563 | Boeing Standard .563" Hole, 737/747 PT6 51-00-00: PG10 FIG16 DETAIL III | 1 | |
| NDT1084-.750 | REFERENCE STANDARD PROCEDURE | 1 | |
| NDT1084-.875 | REFERENCE STANDARD PROCEDURE | 1 | |
| NDT1084-0.09375 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.122 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.125 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.127 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.129 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.156 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-0.157 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.161 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.200 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.218 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.219 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-0.234 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.265 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.281 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.297 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.328 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.359 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.391 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.422 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.453 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.469 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.484 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.531 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.562 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.5625 | REFERENCE STANDARD PROCEDURE | 1 | |
| NDT1084-0.563 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.578 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.594 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.600 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.625 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-0.630 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.640 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.656 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.675 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.688 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.689 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.695 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.700 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.719 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.75 | REFERENCE STANDARD PROCEDURE | 1 | |
| NDT1084-0.750 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-0.787 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.813 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.875 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.906 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.938 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.XXX | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0125 | BOEING REFERENCE STANDARD 737 PART 6 51-00-00 PAGE 9 FIGURE 3, 777 PART 6 51-00-02 PAGE 7 FIGURE 3,777-200/300 PART 6 51-00-02 PAGE 9 FIGURE 3. MATERIAL: 2024-T3. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. PROVIDE CUSTOM | 1 | |
| NDT1084-1.00 | REFERENCE STANDARD PROCEDURE | 2 | |
| NDT1084-1.000 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.062 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.100 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.124 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.125 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-1.187 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.200 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.25 | REFERENCE STANDARD PROCEDURE | 2 | |
| NDT1084-1.250 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.300 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.312 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.3605 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.375 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-1.400 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.437 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.5 | REFERENCE STANDARD PROCEDURE | 1 | |
| NDT1084-1.50/T20 | REFERENCE STANDARD PROCEDURE | 1 | |
| NDT1084-1.500 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.625 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-1.750 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.875 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.940 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.9855 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-11.5MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-14.4MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-14.6MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-17.4MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-17.5MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-2.000 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-2.250 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-27.6MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-3.2/8.7 | REFERENCE STANDARD BOEING 12 HOLE | 1 | |
| NDT1084-7MM | Boeing Standard 767 Part 6 51-00-16 page 7, 7mm Diameter Hole | 1 | |
| NDT1085-032 | BOEING REFERENCE STANDARD 767 PT 6 53-00-10, 737 PART 6 53-30-23. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1085-036 | BOEING REFERENCE STANDARD 767 PT 6 53-00-10, 737 PART 6 53-30-23. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1085-050 | BOEING REFERENCE STANDARD 767 PT 6 53-00-10, 737 PART 6 53-30-23. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1085-063 | BOEING REFERENCE STANDARD 767 PT 6 53-00-10, 737 PART 6 53-30-23. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1085-071 | BOEING REFERENCE STANDARD 767 PT 6 53-00-10, 737 PART 6 53-30-23. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1085-080 | BOEING REFERENCE STANDARD 767 PT 6 53-00-10, 737 PART 6 53-30-23. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1085-090 | BOEING REFERENCE STANDARD 767 PT 6 53-00-10, 737 PART 6 53-30-23. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1085-100 | BOEING REFERENCE STANDARD 767 PT 6 53-00-10, 737 PART 6 53-30-23. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1085-112 | BOEING REFERENCE STANDARD 767 PT 6 53-00-10, 737 PART 6 53-30-23. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1085-125 | BOEING REFERENCE STANDARD 767 PT 6 53-00-10, 737 PART 6 53-30-23. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1086-032 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 and 737 53-30-05. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1086-040 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 and 737 53-30-05. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1086-050 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 and 737 53-30-05. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1086-060 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 and 737 53-30-05. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1086-070 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 and 737 53-30-05. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1086-080 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 and 737 53-30-05. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1086-090 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 and 737 53-30-05. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1086-100 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 and 737 53-30-05. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1086-110 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 and 737 53-30-05. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1086-120 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 and 737 53-30-05. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1087-1 | REFERENCE STANDARD PT6 B737 | 4 | |
| NDT1087-10 | BOEING STANDARD 757 PT6 53-00-11 PG 7-10 FG 2-3 (D634N301) .120" UPPER SHEET - .080" LOWER SHEET, W | 2 | |
| NDT1087-2 | BOEING REFERENCE STANDARD 737 PT 6 53-30-00 & 777 PT 6 53-30-09. .071/.040. INCLUDES NDT1087-P1 POSITIONERS. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1087-3 | REFERENCE STANDARD NDT | 3 | |
| NDT1087-4 | BOEING REFERENCE STANDARD 737 PT 6 53-30-00 & 777 PT6 53-30-09 .090/.040. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1087-5 | BOEING REFERENCE STANDARD 737 PT 6 53-30-00 & 777 PT6 53-30-09 .100/.050. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1087-6 | REFERENCE STANDARD DUAL FREQ | 2 | |
| NDT1087-7 | BOEING REFERENCE STANDARD 737 PT 6 53-30-00 & 777 PT6 53-30-09 .090/.080. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1087-8 | BOEING REFERENCE STANDARD 737 PT 6 53-30-00 & 777 PT6 53-30-09 .100/.090). Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1087-P1 | Boeing Dual Frequency Standard Acrylic Guides (Pair) | 3 | |
| NDT1087-R&D | Boeing Standard w/ 12 NOTCHES, 737/747 PT6 53-30-00:PG10 FIG9 DETAIL II, .080" over .040" | 1 | |
| NDT1087-R&D V2 | Boeing Standard w/ 9 NOTCHES, 737/747 PT6 53-30-00:PG10 FIG9 DETAIL II, .080" over .040" | 1 | |
| NDT1088-050/063 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1088-062/071 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1088-072/050 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 4 | |
| NDT1088-095/071 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1088-112/100 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 2 | |
| NDT1088-133/071 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1088-144/050 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 3 | |
| NDT1088-156/100 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1088-180/180 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1089-.500 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-.626 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-.750 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-0.125 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16,BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø0.125" | 2 | |
| NDT1089-0.157 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø0.157" | 1 | |
| NDT1089-0.563 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance.Hole Ø 0.563" | 1 | |
| NDT1089-0.600 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. HOLE SIZE: 0.600". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-0.625 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.625" | 1 | |
| NDT1089-0.626 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.626" | 1 | |
| NDT1089-0.656 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-0.660 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-0.688 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.688" | 1 | |
| NDT1089-0.750 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.750" | 1 | |
| NDT1089-0.813 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.813" | 1 | |
| NDT1089-0.875 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.875" | 1 | |
| NDT1089-0.938 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.938" | 1 | |
| NDT1089-1.000 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 1.000" | 1 | |
| NDT1089-1.375 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-1.438 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-1.500 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-1.9855 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16. MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-4.8/15.5 | Boeing Standard 737/767 PT6 51-00-00:PG 7 FG 3 Procedure 17, 22 Hole Std, 4.8mm, 5.1mm, 5.5mm, 6.3mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm, 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm,12.5mm, 13mm, 13.5mm, 14mm, 14.5mm, 15mm, 15.5mm with .050 corner notc... | 1 | |
| NDT1092-.040/.016 | Reference Standard 737 PT9 51-00-03 PG 9 FG 2 | 1 | |
| NDT1092-.040/.032 | Reference Standard 737 PT9 51-00-03 PG 9 FG 2 | 1 | |
| NDT1092-.040/.052 | Reference Standard 737 PT9 51-00-03 PG 9 FG 2 | 1 | |
| NDT1092-.050/.040 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2, .050/.040. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1092-.071/.056 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2 .071/.056. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1092-.080/.040 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2 .080/.040. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1092-1.02/.8mm | Reference Standard 737 PT9 51-00-03 PG 9 FG 2, 1.02mm Top, .8mm Bottom | 1 | |
| NDT1093-.050/.040 | Reference Standard 737 PT9 51-00-03 PG 10 FG 3 | 1 | |
| NDT1093-.071/.056 | Reference Standard 737 PT9 51-00-03 PG 10 FG 3 | 1 | |
| NDT1093-.080/.040 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1093-1.27/1.02mm | Reference Standard 737 PT9 51-00-03 PG 10 FG 3, 1.27mm Top, 1.02mm Bottom | 1 | |
| NDT1093-1.8/1.42mm | Reference Standard 737 PT9 51-00-03 PG 10 FG 3, 1.8mm Top, 1.42mm Bottom | 1 | |
| NDT1094-040 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-040-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-050 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-050-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-050/010-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-070 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-070-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-090 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-090-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-110 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-110-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-130 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-130-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-155 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-155-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-185 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-185-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-215 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-215-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-245 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-245-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-275 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-275-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-300 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-300-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1096-040 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-040-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-050 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-050-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-070 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-070-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-090 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-090-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-110 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-110-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-130 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-130-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-155 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-155-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-185 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-185-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-215 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-215-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-245 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-245-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-275 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-275-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-300 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | 1 | |
| NDT1096-300-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1097-A | BOEING REFERENCE STANDARD PT 6 53-30-25 FIG 2. Includes Certification Report and Certificate of Conformance. | 2 | |
| NDT1097-B | BOEING REFERENCE STANDARD PT 6 53-30-25 FIG 2. Includes Certification Report and Certificate of Conformance. | 2 | |
| NDT1097-C | BOEING REFERENCE STANDARD PT 6 53-30-25 FIG 2. Includes Certification Report and Certificate of Conformance. | 2 | |
| NDT1099 | BOEING REFERENCE STANDARD 757 PT 6 53-30-14 Page 5 Figure 1. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT1099G-P1 | BEOING REFERENCE STANDARD 757 Part 4 53-30-04 Page 15-17 Figure 3. Material: Delrin. *** SEE FINALIZED DRAWING*** | 1 | |
| NDT1102-100 | Boeing Standard 787 PT6 51-00-11 PG 5-6 FG 1 | 1 | |
| NDT1102-200 | Boeing Standard 787 PT6 51-00-11 PG 5-6 FG 1 | 1 | |
| NDT1102-300 | Boeing Standard 787 PT6 51-00-11 PG 5-6 FG 1 | 1 | |
| NDT1102-400 | Boeing Standard 787 PT6 51-00-11 PG 5-6 FG 1 | 1 | |
| NDT1102-500 | Boeing Standard 787 PT6 51-00-11 PG 5-6 FG 1 | 1 | |
| NDT1102-600 | Boeing Standard 787 PT6 51-00-11 PG 5-6 FG 1 | 1 | |
| NDT1106 | Boeing Reference Standard composite..737 PT4 51-00-05 PG 5-6 FG 1 | 2 | |
| NDT1106-1 | Boeing Reference Standard composite..737 PT4 51-00-05 PG 5-6 FG 1 With top plate thickness of .060", .080" .100".. | 1 | |
| NDT126 | BOEING REFERENCE STANDARD PT 6 51-00-01 FIG 4. INC | 1 | |
| NDT127 | Casa Standard 51-30-06 PT1 page 5 | 1 | |
| NDT17031A | BOEING STANDARD , 777 PT4 57-20-14 PG 6 FG 2 | 1 | |
| NDT17031B | BOEING STANDARD , 777 PT4 57-20-13 PG 6 FG 2 | 1 | |
| NDT17031C | BOEING STANDARD , 777 PT4 57-20-15 PG 13 FG 2 | 1 | |
| NDT188A | REFERENCE STANDARD BLOCO PADR?O | 1 | |
| NDT194B | Reference Standard NDT194B | 2 | |
| NDT194C | BOEING REFERENCE STANDARD 737 Part 6 53-30-00 Page 10 Figure 6. MATERIAL: 2024-T3 OR T4 CLAD ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT2009 | BOEING REFERENCE STANDARD 727 Part 4 57-10-27 Page 10 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2015 | BOEING REFERENCE STANDARD 727 PT 4 54-30-27. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2016 | BOEING REFERENCE STANDARD 727 Part 6 54-40-27 Page 5 Figure 1. Material: 6AL-4V and 4130, 4330, or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2019 | BOEING REFERENCE STANDARD 727 PT 6 57-40-27 DETAIL II. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2024 | BOEING REFERENCE STANDARD 727 Part 6 53-30-27 Page 4 Figure 1. Material: 2024-T3 or T4 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2025 | BOEING REFERENCE STANDARD 727 Part 6 53-30-27 Page 4 Figure 1. Material: 2024-T3 or T4 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2026 | BOEING REFERENCE STANDARD 727 Part 6 53-30-27 Page 4 Figure 1. Material: 2024-T3 or T4 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2027 | BOEING REFERENCE STANDARD 727 Part 6 53-30-27 Page 4 Figure 1. Material: 2024-T3 or T4 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2028 | BOEING REFERENCE STANDARD 727 Part 6 53-30-27 Page 4 Figure 1. Material: 2024-T3 or T4 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2029 | BOEING REFERENCE STANDARD 727 Part 6 53-30-27 Page 4 Figure 1. Material: 2024-T3 or T4 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2031 | BOEING REFERENCE STANDARD 727 PART 6 55-30-27 FIGURE 3 PAGE 22. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2032-A | BOEING STANDARD 727 PT6 57-10-28 PG 7 FG 2 | 1 | |
| NDT240 | Boeing Standard 727 57-10-27 PT6 page 3 | 1 | |
| NDT291 | Boeing Standard 727 54-40-27 PART 6 page 6 | 1 | |
| NDT295 | Boeing Standard PT4 53-30-27 page 13 | 1 | |
| NDT297 | BOEING REFERENCE STANDARD 727 PART 4 32-30-27 PROCEDURE 5 PAGE 10 FIGURE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT298 | BOEING REFERENCE STANDARD 727 PART 4 32-30-27 PROCEDURE 5 PAGE 11 FIGURE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3001 | standard NDT3001 | 2 | |
| NDT3004 | BOEING REFERENCE STANDARD PART 6 53-30-10 FIGURE 2 (SHEET1&2) PAGE 9&10. | 3 | |
| NDT3005 | BOEING REFERENCE STANDARD 737 Part 6 53-30-13 Page 5 Figure 1. Material: 2024-T3 or T4. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3008 | BOEING REFERENCE STANDARD 737 Part 6 54-40-01 Page 9 Figure 2. Material: 4330 or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3009 | BOEING REFERENCE STANDARD 737 Part 6 54-40-01 Page 9 Figure 2. Material: 4330 or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3010 | BOEING REFERENCE STANDARD 737 Part 6 54-40-01 Page 9 Figure 2. Material: 4330 or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3011 | BOEING REFERENCE STANDARD 737 Part 6 53-30-10 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3012 | BOEING REFERENCE STANDARD 737 Part 4 53-10-03 Page 8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3014-A | BOEING REFERENCE STANDARD 737 Part 4 27-00-01 Page 13 Figure 5. Material: 7075-T6 or T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3014-B | BOEING REFERENCE STANDARD 737 Part 4 27-00-01 Page 13 Figure 5. Material: 7075-T6 or T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3015 | BOEING REFERENCE STANDARD 737 Part 6 53-30-15 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3016B | BOEING REFERENCE STANDARD 737 PT6 53-10-54 PG 7 FG 2 | 1 | |
| NDT3019 | Boeing standard 727 PT6 53-30-27 PG 115 FIG 17 | 2 | |
| NDT3021 | REFERENCE STANDARD B | 6 | |
| NDT3023 | BOEING REFERENCE STANDARD 737 PT 4 32-10-02 FIG 5. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT3023P1 | BOEING REFERENCE STANDARD TRANSDUCER POSITIONER TRANSDUCER POSITIONER TRANSDUCER POSITIONER CONTACT TRANSDUCER | 4 | |
| NDT3023P2 | BOEING REFERENCE STANDARD TRANSDUCER POSITIONER TRANSDUCER POSITIONER TRANSDUCER POSITIONER CONTACT TRANSDUCER | 4 | |
| NDT3023P3 | BOEING REFERENCE STANDARD TRANSDUCER POSITIONER TRANSDUCER POSITIONER TRANSDUCER POSITIONER CONTACT TRANSDUCER | 4 | |
| NDT3024A | Reference Standard NDT3024A | 2 | |
| NDT3030 | BOEING REFERENCE STANDARD 737 PT 4 57-10-01 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3038 | BOEING REFERENCE STANDARD 737 57-50-02 PT 4 FIG 4. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT3039 | BOEING REFERENCE STANDARD 737 53-30-04 PT 4 FIG 2 SHEETS 1&2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3041 | BOEING REFERENCE STANDARD PT 6 57-50-15 PAGE 7 FIGURE 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3046 | BOEING REFERENCE STANDARD 767 PT 4 53-20-01. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3048D | BOEING REFERENCE STANDARD 737 PART 6 53-10-56 FIGURE 4. | 1 | |
| NDT3049 | Reference Standard NDT3049 | 2 | |
| NDT3050 | BOEING REFERENCE STANDARD PT 6 53-30-20 FIG 2. Includes Test Report and Certificate of Conformance. (SCREW AND NUT) | 4 | |
| NDT3052 | BOEING REFERENCE STANDARD 737 Part 6 57-10-26 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3053 | BOEING REFERENCE STANDARD 737 Part 6 53-30-21 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3054 | BOEING REFERENCE STANDARD 737 Part 4 57-10-04 Page 12 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3062 | BOEING REFERENCE STANDARD 737 Part 4 57-10-02 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3065 | BOEING REFERENCE STANDARD 767 PT 6 53-00-12 FIG 2.707, 727, 737, 747 Aircrafts; Part 6, 53-30-22. On 737 Aircraft; Part 4, 53-30-06. On 757, 767 Aircrafts; Part 6, 53-00-09. On 777 Aircraft; Part 6,53-00-07. Includes Test Report and certificate of Conform | 3 | |
| NDT3065-STL | BOEING REFERENCE STANDARD 777 Part 6 53-00-07 Page 8 Figure 3. Material: Aluminum and 301 1/2 Hard. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3068 | REFERENCE STANDARD (NDT) | 5 | |
| NDT3070 | Boeing Standard 737 FIG 2 PG 19 57-10-06 | 1 | |
| NDT3071A and NDT3071B | BOEING REFERENCE STANDARD 737 Part 6 53-10-65 Page 11 Figure 2. Material: 2024-T3 Bare or Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3073 | BOEING REFERENCE STANDARD 737 Part 6 57-10-31 Page 8 Figure 2. Material: 2024-T3 or T4. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3075 | BOEING REFERENCE STANDARD 727 Part 6 53-30-26 Page 7 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3077 | Reference Standard NDT-3077 | 2 | |
| NDT3078 | BOEING REFERENCE STANDARD 737 Part 6 53-10-38 Page 9 Figure 4. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3080 | BOEING REFERENCE STANDARD 737 Part 4 55-30-02 Page 10 Figure 3. Material: 2024-T3, 7050 or 7075. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3080-B | BOEING REFERENCE STANDARD 737 Part 4 737 55-30-02 Page 11 Figure 4. Material:2024-T3,7075 or 7075. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3081 | BOEING REFERENCE STANDARD 737 PT 4 55-10-01 FIG 4. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3082A | BOEING REFERENCE STANDARD 737 PT 6 53-10-70. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3082B | BOEING REFERENCE STANDARD 737 PT 6 53-10-70. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3082C | BOEING REFERENCE STANDARD 737 PT 6 53-10-70. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3083 | BOEING REFERENCE STANDARD 737 Part 4 55-10-03 Page 14 Figure 3. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3085A | BOEING REFERENCE STANDARD 737 Part 6 57-10-32 Page 8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3085B | BOEING REFERENCE STANDARD 737 Part 6 57-10-32 Page 8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3085C | BOEING REFERENCE STANDARD 737 Part 6 57-10-32 Page 8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3086A | BOEING REFERENCE STANDARD 737 Part 6 57-10-32 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3086B | BOEING REFERENCE STANDARD 737 Part 6 57-10-32 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3086C | BOEING REFERENCE STANDARD 737 Part 6 57-10-32 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3090A | BOEING REFERENCE STANDARD 737 Part 6 53-10-52 Page 7 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3090B | BOEING REFERENCE STANDARD 737 Part 6 53-10-52 Page 8 Figure 3. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3090C | BOEING REFERENCE STANDARD 737 Part 6 53-10-52 Page 8 Figure 3. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3091 | BOEING REFERENCE STANDARD B737 53-30-20 PART 6 & B727 53-30-21 PT 6 FIG 2 PG. 6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3092 | BOEING REFERENCE STANDARD 53-10-05 PT 4 FIG 2. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3094 | Boeing Standard 737 PT4 55-10-11 PG5 FG2 | 2 | |
| NDT3098 | Boeing Standard 737 PT4 55-10-07 PG7 FG2 | 1 | |
| NDT3099 | BOEING REFERENCE STANDARD 737 Part 4 55-10-06 Page 8 Figure 2. Material: Ti-6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3100 | Boeing Standard 737 PT4 55-10-08 PG7 FG2 | 2 | |
| NDT3101 | BOEING REFERENCE STANDARD 737 PT 4 55-10-12 FIG 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3102 | Boeing Standard 737 PT4 55-10-10 PG7 FG2 | 1 | |
| NDT3104 | Boeing Standard 737 PT4 55-10-04 PG9 FG2 | 2 | |
| NDT3105 | Boeing Standard 737 PT4 55-10-15 PG7 FG2 | 1 | |
| NDT3106 | Boeing Standard 737 PT6 55-10-30 PG6 FG2 | 1 | |
| NDT3107 | Boeing Standard 737 PT4 55-10-09 PG7 FG2 | 1 | |
| NDT3109 | Boeing Standard 737 PT4 53-80-01 PG7 FG2 | 2 | |
| NDT3111 | Boeing Standard 737 PT4 55-10-05 PG9 FG2 | 1 | |
| NDT3112 | BOEING REFERENCE STANDARD 737 Part 4 57-50-05 Page 7 Figure 2. Material: 15-5 Steel. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3114 | BOEING REFERENCE STANDARD 737 PART 6 53-30-31 FIGURE 1 PAGE 5. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3115 | BOEING REFERENCE STANDARD 737 PART 6 53-30-31 FIGURE 1 PAGE 5. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3116 | Boeing Standard 737 PT4 53-10-06 PG10 FG2 | 2 | |
| NDT3117 | Boeing Standard 737 PT6 54-40-03 PG6 FG2 | 1 | |
| NDT3118 | BOEING REFERENCE STANDARD 737 Part 6 52-30-01 Page 10 Figure 3. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3122 | BOEING REFERENCE STANDARD 737 PART 4 55-10-20 PAGE 14 FIGURE 2. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3123 | BOEING REFERENCE STANDARD 737 PART 4 55-10-20 PAGE 15 FIGURE 3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3124 | BOEING REFERENCE STANDARD 737 PART 4 55-10-20 PAGE 16 FIGURE 4. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3125 | BOEING REFERENCE STANDARD PART 4 55-10-25 FIGURE 2 PAGE 18. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3126 | BOEING REFERENCE STANDARD PART 4 55-10-25 FIGURE 3 PAGE 19. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3127 | BOEING REFERENCE STANDARD PART 4 55-10-25 FIGURE 4 PAGE 20. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3129 | BOEING REFERENCE STANDARD Part 6 53-30-38 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3130 | Boeing Standard 737 PT6 53-30-37 PG9 FG2 | 1 | |
| NDT3131 | BOEING REFERENCE STANDARD 737 Part 6 53-11-10 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3132 | BOEING REFERENCE STANDARD 737 Part 6 53-11-18 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3132B | BOEING REFERENCE STANDARD 737 Part 6 53-11-18 page 8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3133 | BOEING REFERENCE STANDARD 737 Part 6 53-11-16 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3136 | Boeing Standard 737 PT4 55-10-14 PG7 FG2 | 1 | |
| NDT3137 | BOEING REFERENCE STANDARD 737 Part 6 57-50-03 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3139 | Boeing Standard 737 PT4 53-10-07 PG6 FG2 | 2 | |
| NDT3141 | Boeing Standard 737 PT4 55-10-13 PG 9 FG 2 | 2 | |
| NDT3142 | Boeing Standard 737 PT6 53-11-08 PG 6 FG 2 | 2 | |
| NDT3144 | BOEING REFERENCE STANDARD 737 Part 4 55-10-16 Page 6 Figure 2. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3145 | BOEING REFERENCE STANDARD 737 Part 4 55-10-16 Page 7 Figure 3. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3146 | BOEING REFERENCE STANDARD 737 Part 4 55-10-16 Page 8 Figure 4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3147 | BOEING REFERENCE STANDARD 737 PART 4 53-30-10 PAGE 7 FIGURE 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3149 | Boeing Standard 737 PT6 53-30-419 PG6 FG2 | 2 | |
| NDT3150 | Boeing Standard 737 PT6 55-10-42 PG 7 FG 2 | 1 | |
| NDT3151 | BOEING REFERENCE STANDARD 737 PT 6 53-30-46 PAGE 7 FIGURE2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3152- H | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT3152-A | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-B | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-C | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-D | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-E | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-F | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-G | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-H | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-I | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-J | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-K | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152A-K | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2, NDT3152A THRU K | 1 | |
| NDT3153-A | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-B | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-C | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-D | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-E | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-F | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-G | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-H | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-J | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153A-J | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2, NDT3153A THRU J | 1 | |
| NDT3156 | Boeing Standard 737 PT6 57-10-60 PG 11 FG 2 | 4 | |
| NDT3157 | Boeing Standard 737 PT6 57-10-60 PG 11 FG 2 | 4 | |
| NDT3159 | Boeing Standard 737 PT6 57-10-60 PG 11 FG 2 | 4 | |
| NDT3161 | Boeing Standard 737 PT6 57-10-60 PG 11 FG 2 | 3 | |
| NDT3162 | Boeing Standard 737 PT6 57-10-60 PG 11 FG 2 | 4 | |
| NDT3163 | Boeing Standard 737 PT6 57-10-60 PG 11 FG 2 | 2 | |
| NDT3164 | Boeing Standard 737 PT6 57-10-60 PG 11 FG 2 | 3 | |
| NDT3166-001 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3166-002 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3166-003 | Boeing Standard 737 PT4 57-10-07 PG 8 FG 2 | 3 | |
| NDT3166-004 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3166-005 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3166-006 | Boeing Standard 737 PT4 57-10-14 PG 5 FG 2 | 4 | |
| NDT3166-007 | Boeing Standard 737 PT4 57-10-08 PG 6 FG 2 | 4 | |
| NDT3167-A | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-B | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-C | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-D | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-E | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-F | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-G | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-H | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-J | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167A-J | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2, NDT3167A THRU J | 1 | |
| NDT3168 | BOEING REFERENCE STANDARD 737 Part 6 57-10-53 Page 6 Figure 2. Material: 7075-T7. Includes test report and Certificate of Conformance. | 3 | |
| NDT3169 | Boeing Standard 737 PT6 57-10-48 PG5 FG2 | 1 | |
| NDT3170 | Boeing Standard 737 PT4 57-10-06 PG 16 FG 2 | 5 | |
| NDT3171 | Boeing Standard 737 PT4 57-10-06 PG 17 FG 3 | 5 | |
| NDT3172 | Boeing Standard 737 PT4 57-10-05 PG 14 FG 2 | 3 | |
| NDT3176-A | Boeing Standard 737 PT6 57-10-59 PG 12 FG 2 | 3 | |
| NDT3176-B | Boeing Standard 737 PT6 57-10-59 PG 12 FG 2 | 3 | |
| NDT3176-C | Boeing Standard 737 PT6 57-10-59 PG 12 FG 2 | 3 | |
| NDT3176-D | Boeing Standard 737 PT6 57-10-59 PG 12 FG 2 | 3 | |
| NDT3178-A | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2 | 2 | |
| NDT3178-B | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2 | 2 | |
| NDT3178-BOEING | REFERENCE STANDARD (NDT) | 1 | |
| NDT3178-C | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2 | 3 | |
| NDT3178-D | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2 | 3 | |
| NDT3178-E | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2 | 2 | |
| NDT3178-F | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2 | 2 | |
| NDT3178-G | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2 | 2 | |
| NDT3178-X | BOEING REFERENCE STANDARD 737 Part 6 57-10-62 Page 8 Figure 2. Material: 2024-T3. Test Report and Certificate of Conformance. | 1 | |
| NDT3178A-G | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2, NDT3178A THRU G | 1 | |
| NDT3179-A | BOEING STANDARD 737 NDT Manual Part 6 Chapter 53-30-39 | 1 | |
| NDT3179-B | BOEING STANDARD 737 NDT Manual Part 6 Chapter 53-30-39 | 1 | |
| NDT3179-C | BOEING STANDARD 737 NDT Manual Part 6 Chapter 53-30-39 | 1 | |
| NDT3180-A | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3180-B | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3180-C | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3180-D | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3180-E | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3180-F | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3180-G | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3180-H | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3180-J | Boeing Standard 737 PT6 57-10-61 PG 7 FG 2 | 1 | |
| NDT3181-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 page 9 Figure 2. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3181-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 page 9 Figure 2. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3182-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 Page 10 Figure 3. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3182-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 Page 10 Figure 3. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3183 | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 Page 11 Figure 4. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3184 | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 Page 12 Figure 5 | 1 | |
| NDT3185-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 Page 13 Figure 6. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3185-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 Page 13 Figure 6. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3186 | Boeing Standard 737 PT4 57-10-17 PG 11 FG 2 | 3 | |
| NDT3187 | Boeing Standard 737 PT4 57-10-17 PG 12 FG 3 | 3 | |
| NDT3189 | BOEING REFERENCE STANDARD 737 Part 4 55-10-18 Page 6 Figure 2. Material: 7075-T6, 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3190-A | Boeing Standard 737 PT6 55-10-45 PG 6 FG 2 | 2 | |
| NDT3190-B | Boeing Standard 737 PT6 55-10-45 PG 6 FG 2 | 2 | |
| NDT3190-C | Boeing Standard 737 PT6 55-10-45 PG 6 FG 2 | 2 | |
| NDT3190-D | Boeing Standard 737 PT6 55-10-45 PG 6 FG 2 | 2 | |
| NDT3191 | BOEING REFERENCE STANDARD 737 Part 6 55-10-28 Page 6 Figure 2. Material: 2024-T3 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3192 | BOEING REFERENCE STANDARD 737 Part 6 55-10-28 Page 7 Figure 3. Material: 2024-T3 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3193 | BOEING REFERENCE STANDARD 737 PT 6 51-30-28 FIG 1. Includes Certification Report and Certificate of Conformance. | 1 | |
| NDT3194-36/36 | BOEING REFERENCE STANDARD 737 PART 6 53-30-45 PAGE 7 FIGURE 1 TABLE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3194-40/40 | BOEING REFERENCE STANDARD 737 PART 6 53-30-45 PAGE 7 FIGURE 1 TABLE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3194-45/40 | BOEING REFERENCE STANDARD 737 PART 6 53-30-45 PAGE 7 FIGURE 1 TABLE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3194-50/40 | BOEING REFERENCE STANDARD 737 PART 6 53-30-45 PAGE 7 FIGURE 1 TABLE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3195 | BOEING REFERENCE STANDARD 737 PT 4 55-10-17 PAGE 18 FIGURE 4. MATERIAL: 7075-T6 or EQUIVALENT AIRCRAFT QUALITY ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3196 | BOEING REFERENCE STANDARD 737 PT 4 55-10-17 PAGE 19 FIGURE 5. MATERIAL: 7075-T6 or EQUIVALENT AIRCRAFT QUALITY ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3197 | BOEING REFERENCE STANDARD 737 PT 4 55-10-17 PAGE 20 FIGURE 6. MATERIAL: 7075-T6 or EQUIVALENT AIRCRAFT QUALITY ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3202-A | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | 1 | |
| NDT3202-B | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | 1 | |
| NDT3202-C | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | 1 | |
| NDT3202-D | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | 1 | |
| NDT3202-E | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | 2 | |
| NDT3202-F | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | 1 | |
| NDT3202-G | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | 1 | |
| NDT3204 | Boeing Standard 737 PT4 53-10-08 PG 9 FG 2 | 2 | |
| NDT3207 | Boeing Standard 737 PT6 55-10-50 PG 5 FG 2 | 1 | |
| NDT3207A | BOEING REFERENCE STANDARD 737 Part 6 55-10-82 Paqe 5 Figure 2. Material: 7075-T6 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3208-C | Boeing Standard 737 PT6 55-10-55 PG6 FG3 | 1 | |
| NDT3209-A | BOEING REFERENCE STANDARD PART 6 55-10-62 PAGE 17 FIGURE 2. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3209-B | BOEING STANDARD 737 PT6 55-10-62 PG 18 FG 3 | 1 | |
| NDT3209A | BOEING REFERENCE STANDARD 737 Part 6 55-10-74 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3210 | Boeing Standard 737 PT6 57-10-81 PG 8 FG 2 | 1 | |
| NDT3211 | Boeing Standard 737 PT6 57-10-81 PG 9 FG 3 | 1 | |
| NDT3212 | Boeing Standard 737 PT6 57-10-81 PG 10 FG 4 | 1 | |
| NDT3214 | BOEING STANDARD 737 PT4 53-10-09 PG6 FG2 | 1 | |
| NDT3217-A | Boeing Standard 737 PT6 57-10-79 PG6 FG2 | 1 | |
| NDT3217-B | Boeing Standard 737 PT6 57-10-79 PG6 FG2 | 1 | |
| NDT3218 | Boeing Standard 737 PT6 55-10-53 PG 10 FG 3 | 2 | |
| NDT3219 | BOEING REFERENCE STANDARD 737 PART 4 57-10-19 PAGE 11 FIGURE 2. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3220 | Boeing Standard 737 PT4 57-50-04 PG 6 FG 2 | 1 | |
| NDT3221 | Boeing Standard 737 PT4 55-10-19 PG 5 FG 2 | 2 | |
| NDT3223 | Boeing Standard 737 PT6 53-11-34 PG 6 FG 2 | 2 | |
| NDT3224 | BOEING REFERENCE STANDARD 737 Part 4 54-40-01 Page 7 Figure 3. Material: 15-5PH or 4330. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3225 | BOEING REFERENCE STANDARD 737 Part 6 54-40-20 Page 6 Figure 2. Material: 6AL-4V and 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3226 | BOEING REFERENCE STANDARD 53-11-39 PART 6. MATERIAL: 2024-T3 ALUMINUM. 2. Includes Test Report and Certificate of Conformance.BACR15FT6D RIVETS BUCKED BETWEEN .250"Ø and .280"Ø. | 2 | |
| NDT3226A | BOEING REFERENCE STANDARD 737 Part 6 53-11-39 Page 5 Figure 2. Material: 2024-T4 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3227 | BOEING REFERENCE STANDARD 737 Part 4 54-40-09 Page 6 Figure 2. Material: 15-5 PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3228-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-87 Page 7 Figure 2. Material: 7150-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3228-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-87 Page 7 Figure 2. Material: 7150-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3228-C | BOEING REFERENCE STANDARD 737 Part 6 57-10-87 Page 7 Figure 2. Material: 7150-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3229 | Boeing Standard 737 PT6 53-30-50 PG 21 FG 2 | 2 | |
| NDT322A | BOEING REFERENCE STANDARD 737 Part 6 53-10-25 Page 4 Figure 1. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3230 | BOEING REFERENCE STANDARD 737 pt 4 53-30-11 page 8 figure 2. Includes test report and Certificate of Conformance. | 2 | |
| NDT3231 | Boeing Standard 737 PT4 53-10-10 PG10 FG2 | 2 | |
| NDT3232-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-86 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3232-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-86 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3232-C | BOEING REFERENCE STANDARD 737 Part 6 57-10-86 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3233 | BOEING REFERENCE STANDARD 737 Part 4 53-30-11 Page 8 Figure 2. Includes test report and Certificate of Conformance. | 2 | |
| NDT3234 | BOEING REFERENCE STANDARD 737 Part 6 57-10-89 Page 7 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3235 | BOEING REFERENCE STANDARD 737 Part 4 -54-40-05 Page 5 Figure 2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3236 | BOEING REFERENCE STANDARD 737 Part 6 57-10-85 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3237-.040/.010 | Boeing Standard 737 PT4 53-30-12 PG 14-15 FG 7 | 1 | |
| NDT3237-.050/.015 | Boeing Standard 737 PT4 53-30-12 PG 14-15 FG 7 | 1 | |
| NDT3237-.130/.020 | Boeing Standard 737 PT4 53-30-12 PG 14-15 FG 7 | 1 | |
| NDT3237-0.040/0.010 | BOEING REFERENCE STANDARD 737 PT 4 53-30-12 FASTENER (BACR15GF5*). Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3237-0.050-0.015 | REFERENCE STANDARD BLOCO PADR?O | 1 | |
| NDT3237-0.050/0.015 | BOEING REFERENCE STANDARD 737 PT 4 53-30-12 FASTENER (BACR15GF5*). Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3237-0.130/0.020 | BOEING REFERENCE STANDARD 737 PT 4 53-30-12 FASTENER (BACR15GF5*). Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3237-P1 | Boeing Standard 737 PT4 53-30-12 PG 16 FG 8 | 2 | |
| NDT3238 | BOEING REFERENCE STANDARD 737 Part 4 55-10-23 Page 6 Figure 2. Material: 7050-T7 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3239 | BOEING REFERENCE STANDARD 737 Part 4 55-30-03 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3240 | BOEING REFERENCE STANDARD 737 Part 6 57-10-90 Page 6 Figure 3. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3242 | BOEING REFERENCE STANDARD 737 PT 4 54-40-03. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3243 | BOEING REFERENCE STANDARD 737 PT 4 54-40-04. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3244 | BOEING REFERENCE STANDARD 737 Part 6 53-11-42 Page 8 Figure 2. Material: 2024-T4 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3248 | BOEING REFERENCE STANDARD 737 Part 6 55-10-66 Page 5 Figure 2. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3249 | BOEING Reference Standard 551064 | 1 | |
| NDT3250 | BOEING Reference Standard 551064 | 1 | |
| NDT3251 | BOEING REFERENCE STANDARD 737 Part 6 52-30-02 page 5 Figure 2. Material: 7050-T7 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3252 | BOEING REFERENCE STANDARD 737 Part 4 52-10-03 Page 7 Figure 2. Material: 7050-T7 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3253 | BOEING REFERENCE STANDARD 737 Part 4 54-40-06 Page 7 Figure 2. Material: 15-5PH or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3254 | BOEING REFERENCE STANDARD 737 Part 4 54-40-06 Page 8 Figure 3. Material: 15-5PH or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3257 | BOEING REFERENCE STANDARD 737 Part 657-10-96 Page 7 Figure 2. Material: 7050-T7 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3258-B | BOEING REFERENCE STANDARD 737 Part 4 54-40-08 Page 6 Figure 2. Material: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3259 | BOEING REFERENCE STANDARD 737 Part 6 54-40-17 Page 8 Figure 2. Material: 6AL-4V, 15-5PH and 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3260 | BOEING REFERENCE STANDARD 737 Part 6 54-40-17 Page 9 Figure 3. Material: 6AL-4V, 15-5PH and 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3261 | BOEING REFERENCE STANDARD 737 Part 6 57-50-31 Page 9 Figure 2. Material: 2024-T3 and 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3262 | BOEING REFERENCE STANDARD 737 Part 4 54-40-17 Page 6 Figure 2. Material: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3263 | BOEING REFERENCE STANDARD 737 Part 6 57-50-31 Page 10 Figure 3. Material: 2024-T3 and 7075-T7. Inlcudes | 1 | |
| NDT3264 | BOEING REFERENCE STANDARD 737 Part 4 55-10-22 page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3265 | BOEING REFERENCE STANDARD 737 Part 655-10-70 Page 8 Figure 2. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3266 | BOEING REFERENCE STANDARD 737 Part 6 -57-10-96 Page 8 Figure 3. Material: 7050-T7 or Eqivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3267-.040/.040 | Boeing Bonded Reference Standard 737 PT4 53-30-01 PG 6 FG 3, .040/.040. IncludesTest Report and Certificate of Conformance. | 2 | |
| NDT3267-.050/.040 | Boeing Bonded Reference Standard 737 PT4 53-30-01 PG 6 FG 3, .050/.040. IncludesTest Report and Certificate of Conformance. | 2 | |
| NDT3267-.063/.056 | Boeing Bonded Reference Standard 737 PT4 53-30-01 PG 6 FG 3, .063/.056. IncludesTest Report and Certificate of Conformance. | 2 | |
| NDT3267-.063/.063 | Boeing Bonded Reference Standard 737 PT4 53-30-01 PG 6 FG 3, .063/.063. IncludesTest Report and Certificate of Conformance. | 1 | |
| NDT3267-.080/.063 | Boeing Bonded Reference Standard 737 PT4 53-30-01 PG 6 FG 3, .080/.063. IncludesTest Report and Certificate of Conformance. | 2 | |
| NDT3267-.080/.100 | Boeing Bonded Reference Standard 737 PT4 53-30-01 PG 6 FG 3, .080/.100. IncludesTest Report and Certificate of Conformance. | 1 | |
| NDT3267-T1/T2 | BOEING REFERENCE STANDARD NDT3267-T1/T2 X 1SET OF 4 PIECES | 1 | |
| NDT3268 | BOEING REFERENCE STANDARD 737 Part 4 53-10-11 Page 4 Figure 2. Material: 7075-T6 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3271 | BOEING REFERENCE STANDARD 737 PART 4 55-10-27 FIGURE 2 SHEET 1&2 PAGE 12. MATERIAL: 6AL-4v Includes Test Report and Certificate of Conformance. MATERIAL: 6AL-4v TITANIUM. | 2 | |
| NDT3272 | BOEING REFERENCE STANDARD 737 PART 4 55-10-27 FIGURE 3 PAGE 14. MATERIAL: 6AL-4v. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3273A | BOEING REFERENCE STANDARD PART 6 55-10-84 PAGE 6 FIGURE 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3276 | BOEING REFERENCE STANDARD 737 PART 4 53-20-02 FIGURE 2 PAGE 9. MATERIAL: 2024-T3 ALUMINUM WITH RUBBER FEET ON BOTTOM FOR SUPPORT. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3276A | REFERENCE STANDARD BOEING | 2 | |
| NDT3278-A | BOEING REFERENCE STANDARD 737 PART 6 53-30-50 FIGURE 3 PAGE 30. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3278-B | BOEING REFERENCE STANDARD 737 PART 6 53-30-50 FIGURE 3 PAGE 30. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3278-C | BOEING REFERENCE STANDARD 737 PART 6 53-30-50 FIGURE 3 PAGE 30. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3282 | BOEING REFERENCE STANDARD 737 PART 4 57-10-20 PAGE 7 FIGURE 2 . MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3285 | BOEING REFERENCE STANDARD 737 Part 6 53-30-63 Page 11 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3286 | BOEING REFERENCE STANDARD 787 Part 4 53-20-02 Page 7 Figure 2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3287 | BOEING REFERENCE STANDARD 787 Part 4 53-20-01 Page 7 Figure 2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3288 | BOEING REFERENCE STANDARD 787 Part 4 53-20-01 Page 7 Figure 2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3289 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3291 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3292 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3293 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3294 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3295 | BOEING REFERENCE STANDARD 737 Part 6 53-30-66 Page 6 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3296 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3297 | BOEING REFERENCE STANDARD 737 Part 6 53-30-64 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3298 | BOEING REFERENCE STANDARD 737 Part 6 53-30-66 Page 6 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3299 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT32XX-B | Boeing Standard top plate only | 1 | |
| NDT3300 | BOEING REFERENCE STANDARD 737 Part 6 5330-60 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3301A | REFERENCE STANDARD B737 NDTM P4 53-10-13 | 1 | |
| NDT3303 | BOEING REFERENCE STANDARD 737 PT 4 FIGURE 2. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3305A | BOEING REFERENCE STANDARD PART 4 53-10-64 PG.18, FIG. 5. MATERIAL: 2024-T42 CLAD ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3305B | BOEING REFERENCE STANDARD PART 4 53-10-64 PG.18, FIG. 5. MATERIAL: 2024-T42 CLAD ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3307 | BOEING REFERENCE STANDARD 737 PART 6 57-11-05 PAGE 5 FIGURE 2 SHEET 1. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3308 | BOEING REFERENCE STANDARD 737 PART 6 57-11-05 PAGE 6 FIGURE 2 SHEET 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3312 | BOEING REFERENCE STANDARD 737 PART 4 53-10-13 FIGURE 2 SHEET 1&2 | 2 | |
| NDT3316 | REFERENCE STANDARD FOR INSPECTION USE ON B737 AS PER B737 NDTM PART 4 53-10-16 | 2 | |
| NDT3317 | BOEING 737 STANDARD NTM , TAPERED ALUMINUM AND TITANIUM WITH .25 DIAMETER HOLES | 1 | |
| NDT3318 | BOEING 737 STANDARD NTM 53-11-61, TAPERED ALUMINUM AND TITANIUM WITH .375 DIAMETER HOLES | 1 | |
| NDT335 | REFERENCE STANDARD | 2 | |
| NDT363 | Boeing Reference Standard 737 53-30-03 PT6 PG3 | 1 | |
| NDT391 | BOEING REFERENCE STANDARD Part 6 53-10-51 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT392 | BOEING REFERENCE STANDARD 737 Part 4 53-30-03 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT394 | BOEING REFERENCE STANDARD 737 PT 6 54-30-01. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT396 | REFERENCE STANDARD B | 6 | |
| NDT396-32/40 | BOEING REFERENCE STANDARD 737 PT 6 53-30-44 FIGURE 2 PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT396-36/36 | BOEING REFERENCE STANDARD 737 PT 6 53-30-44 FIGURE 2 PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT396-40/40 | BOEING REFERENCE STANDARD 737 PT 6 53-30-44 FIGURE 2 PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT396-45/40 | BOEING REFERENCE STANDARD 737 PT 6 53-30-44 FIGURE 2 PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT396-50/40 | BOEING REFERENCE STANDARD 737 PT 6 53-30-44 FIGURE 2 PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT396-56/40 | BOEING REFERENCE STANDARD 737 PT 6 53-30-44 FIGURE 2 PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT398 | Reference Standard 737 | 2 | |
| NDT4064 | BOEING REFERENCE STANDARD 747 Part 6 53-30-06 Page 4 Figure 1. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4116 | BOEING REFERENCE STANDARD 747 Part 4 54-40-02 Page 20 Figure 7. Material: 4330M or 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4150 | BOEING 747 COMPOSITE REFERENCE STANDARD PART 4 57-22-01 FIGURE 2. Includes C-Scan Report and Certificate of Conformance. | 1 | |
| NDT4151 | BOEING 747 REFERENCE STANDARD PART 4 57-10-17 FIGURE 3 PAGE 10. 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4152 | BOEING 747 REFERENCE STANDARD PART 4 53-10-07 PAGE 6 FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4153 | BOEING 747 REFERENCE STANDARD PART 4 57-30-08 PAGE 6 FIGURE 2. PROCEDURE FOR INSPECTING CRACKED RIVET PART NUMBER BACR15FH10DD17 | 1 | |
| NDT4154 | BOEING REFERENCE STANDARD 747 PT 4 54-40-14 FIGURE 5 PAGE 19. Includes Test Report and Certificate of Conformance | 1 | |
| NDT4155 | BOEING REFERENCE STANDARD 747 PT 4 54-40-14 FIGURE 6 PAGE 20. Includes Test Report and Certificate of Conformance | 1 | |
| NDT4156 | BOEING REFERENCE STANDARD 747 PT 4 54-40-14 FIGURE 7 PAGE 21. Includes Test Report and Certificate of Conformance | 1 | |
| NDT4157 | BOEING REFERENCE STANDARD 747 PT 4 54-40-14 PAGE 22 FIGURE 8. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4170 | BOEING REFERENCE STANDARD 747 Part 4 53-30-02 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4175 | BOEING REFERENCE STANDARD 747 PT 6 53-10-41 Page 12 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4176 | BOEING REFERENCE STANDARD 747 PT 6 53-10-41 Page 13 Figure 3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4178 | BOEING REFERENCE STANDARD 747 Part 4 53-40-05 Page 4 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4183 | BOEING 747 REFERENCE STANDARD PART 4 53-30-03 FIGURE 2 PAGE 21. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4187 | BOEING 747 REFERENCE STANDARD PART 4 57-10-18 FIGURE 2 PAGE 8. 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4190 | Boeing Standard w/ certs | 1 | |
| NDT4190A | Boeing Standard w/ certs | 1 | |
| NDT4205 | BOEING REFERENCE STANDARD 747 PT 4 57-40-07 PAGE 5 FIGURE 2. MATERIAL: 4340 STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4208 | BOEING REFERENCE STANDARD 747 PART 4 54-40-23 FIGURE 2 PAGE 8. Includes Certification Report and Certificate of Conformance. | 2 | |
| NDT4209 | BOEING REFERENCE STANDARD 747 PT 4 53-10-08 PAGE 12. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4211 | BOEING REFERENCE STANDARD 747 PT 4 53-10-08 PAGE 12. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4212 | Boeing Standard 747 53-10-09 PT4 PG4 | 1 | |
| NDT4214 | Boeing Standard 747 53-30-08 PT6 PG8 | 1 | |
| NDT4219 | BOEING REFERENCE STANDARD 747 Part 4 53-10-11 Page 9 Figure 2. Material: 7075-T6 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4220 | BOEING REFERENCE STANDARD 747 Part 6 53-30-13 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4221 | Boeing Standard 747 53-30-12 PT6 PG 5 | 1 | |
| NDT4224 | Boeing Standard 747 54-40-24 PT4 PG7 | 1 | |
| NDT4225 | BOEING 747 REFERENCE STANDARD PART 6 53-10-47 PAGE 7 FIGURE 2. MATERIAL: 7075-T6 or 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4226 | BOEING REFERENCE STANDARD 747 Part 4 57-10-22 Page 6 Figure 2, Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4228 | BOEING 747 REFERENCE STANDARD PART 6 54-40-16 PAGE 11 FIGURE 2. MATERIAL: 15-5PH, 17-4 PH or 4130 STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4229 | BOEING REFERENCE STANDARD PT 6 54-40-16 FIG 3, PAGE 12. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4230 | BOEING REFERENCE STANDARD 747 PT 4 53-10-10 Page 6 Figure 2. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4231 | BOEING 747 REFERENCE STANDARD PART 4 57-10-18 FIGURE 2 PAGE 8. 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4232 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 2, Page 6. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4233 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 3, Page 7. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4234 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 4, Page 8. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4235 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 5, Page 9. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4236 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4237 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4238 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4239 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4240 | BOEING REFERENCE STANDARD 747 Part 4 27-20-01 Page 8 Figure 3, Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4240P | BOEING 747 REFERENCE STANDARD PART 4, 27-20-01 PAGE 6 FIGURE 2 Includes Certificate of Conformance. | 1 | |
| NDT4243 | BOEING REFERENCE STANDARD 747 Part 6 57-10-31 Page 4 Figure 1. Material: 2024-T3 or An Airplane Quality with an Electrical Conductivity of 28-43% IACS. Fasteners: Non-Magetic Fastener. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4244 | BOEING REFERENCE STANDARD 747 Part 4 53-10-12 Page 5 Figure 2. Material: 7075-T6, 7075-T7, or 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT4246 | Boeing Standard 747 53-10-34 PT6 PG 5 | 1 | |
| NDT4247 | BOEING REFERENCE STANDARD 747 PART 4 27-60-01, PAGE 5 FIGURE 2. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT4249 | BOEING REFERENCE STANDARD 747 Part 6 53-30-19 Page 3 Figure 1. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4250 | Boeing Standard 747 PT4 57-30-10 PG 6 FG 2 | 1 | |
| NDT4251 | Boeing Standard 747 PT4 57-30-11 PG 11 FG 2 | 1 | |
| NDT4252 | Boeing Standard 747 PT4 57-10-23 PG 6 FG 2 | 1 | |
| NDT4254 | BOEING STANDARD 747 PT4 57-10-24 FIG 2 | 1 | |
| NDT4263 | BOEING STANDARD 747 FG2 | 2 | |
| NDT4264 | BOEING STANDARD 747 FG3 | 2 | |
| NDT4266 | BOEING REFERENCE STANDARD 747 PT 4 57-30-12 PAGE 8 FIGURE 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4267 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 10 FIGURE 2. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4268 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 11 FIGURE 3. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4269 | BOEING REFERENCE STANDARD 747 part 4 57-40-08 page 12 Figure 4. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4270 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 13 FIGURE 5. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4271 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 14 FIGURE 6. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4272 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 15 FIGURE 7. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4273 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 16 FIGURE 8. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4274 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 17 FIGURE 9. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4275 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4276 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4277 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4278 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4279 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4280 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4281 | BOEING REFERENCE STANDARD 747 PT 4 57-10-26 PAGE 5 FIGURE 2. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT431 | Boeing Standard 747-53-10-19 PT 6 PG 4 | 1 | |
| NDT442 | Boeing Standard 747-53-10-02 PT 4 PG 4 | 1 | |
| NDT443 | Boeing Standard 747-53-10-02 PT 4 PG 4 | 1 | |
| NDT455 | Boeing Standard 747-53-40-01 PT 4 PG 6 | 1 | |
| NDT456 | Boeing Standard 747-53-40-01PT 4 PG 7 | 1 | |
| NDT474 | Boeing Standard 747 PT6 53-10-20 FG 1 PG5 | 1 | |
| NDT476 | Boeing Standard 747-53-10-18 PT 6 PG 5 | 1 | |
| NDT478 | Boeing Standard 747-53-10-18 PT 6 PG 5 | 1 | |
| NDT479 | Boeing Standard 747 PT6 53-10-22 FG 2 PG 5 | 1 | |
| NDT480 | Boeing Standard 747 PT6 53-10-22 FG 3 PG 6 | 1 | |
| NDT481 | Boeing Standard 747 PT6 53-10-22 FG 4 PG 7 | 1 | |
| NDT484 | Boeing Standard 747 PT6 53-10-25 FG 1 PG3 | 1 | |
| NDT490 | Boeing Standard 747 57-30-06 Part 4 page 5 fig 2 | 1 | |
| NDT491 | Boeing Standard 747 PT6 53-10-16 FG 1 PG 5 | 1 | |
| NDT504A | BOEING REFERENCE STANDARD 757 Part 6 54-40-01 Page 12 Figure 3, Material: 4330, 4330M, 4340, or 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT504B | BOEING REFERENCE STANDARD 757 Part 6 54-40-01 Page 12 Figure 3, Material: 4330, 4330M, 4340, or 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT504C | BOEING REFERENCE STANDARD 757 Part 6 54-40-01 Page 12 Figure 3, Material: 4330, 4330M, 4340, or 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT504D | BOEING REFERENCE STANDARD 757 Part 6 54-40-01 Page 12 Figure 3, Material: 4330, 4330M, 4340, or 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT504E | BOEING REFERENCE STANDARD 757 Part 6 54-40-01 Page 12 Figure 3, Material: 4330, 4330M, 4340, or 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT506 | Boeing Standard 757 Part 4 57-40-01 figure 3 | 1 | |
| NDT5089 | REFERENCE STANDARD FOR UT INSPECTION | 2 | |
| NDT5097-A | BOEING REFERENCE STANDARD 757 PT 4 57-20-03 FIG 2 PG 6. Material 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT5097-B | BOEING REFERENCE STANDARD 757 PT 4 57-20-03 FIG 2 PG 6. Material 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT5097-C | BOEING REFERENCE STANDARD 757 PT 4 57-20-03 FIG 2 PG 6. Material 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT5097-D | BOEING REFERENCE STANDARD 757 PT 4 57-20-03 FIG 2 PG 6. Material 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT511 | BOEING REFERENCE STANDARD 757 Part 6 57-10-02 Page 7 Figure 2. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT512 | BOEING REFERENCE STANDARD 757, PT 4 5710-01. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT514 | BOEING REFERENCE STANDARD 757 PT 6 57-20-01. BOEING REFERENCE STANDARD 757 PT 6 57-20-01 FASTENER. Includes Test Report and Certificate of Conformance. FASTENER (BACB30VU12K14 + BACC30M12, BACBVU10K13 + BACC30M10) | 1 | |
| NDT515 | BOEING REFERENCE STANDARD 757 PT 4 57-21-01 FIG 3 PG 6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT516 | BOEING REFERENCE STANDARD 757 Part 6 57-23-01 Page 3 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT518 | Ultrasonic Inspection Reference standard 757 | 1 | |
| NDT519 | BOEING REFERENCE STANDARD 757 Part 6 52-30-01 Page 8 Figure 4. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT520 | Eddy Current Inspection Reference standard 757 | 1 | |
| NDT522 | BOEING REFERENCE STANDARD 757 PT 4 53-80-01 FIGURE 4 PAGE 8. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT524 | BOEING REFERENCE STANDARD 757 PART 6 53-10-06 PAGE 5 FIGURE 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT525 | Boeing Reference Standard 757 Part 4 54-50-01 Page 7 Figure 3. Material: 4330, 4330M, 4340, or 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT527 | BOEING REFERENCE STANDARD 757 Part 6 53-30-06 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT528 | BOEING REFERENCE STANDARD 757 Part 4 55-10-04 Page 10 Figure 2. Material: Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT531 | BOEING REFERENCE STANDARD 757 Part 6 53-60-01 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT533 | BOEING REFERENCE STANDARD 757 PT 4 55-10-03 FI2 3 PG 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT537 | BOEING REFERENCE STANDARD 757 PT 4 57-10-02 FIG 3 PG 8. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT539 | Boeing Standard 757 PT6 55-10-02 PG5 FG2 | 1 | |
| NDT542 | Boeing Standard 757 Part 4 55-10-07 page 11 figure 3 | 1 | |
| NDT546 | BOEING REFERENCE STANDARD 757 PT 4 57-20-02 FIGURE 2 PG. 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT549 | STANDARD BOEING 757 PT6 57-20-02 | 1 | |
| NDT552 | BOEING REFERENCE STANDARD 757 PT 4 57-20-01. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT555 | BOEING REFERENCE STANDARD 757 PT 4 53-10-19 FIGURE 2 PAGE 8. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT558 | BOEING REFERENCE STANDARD 757 Part 6 53-30-12 Page 8 Figure 1. Material: 2024-T3. Includes Certification Report and Certificate of Conformance. | 1 | |
| NDT560 | BOEING REFERENCE STANDARD 757 PT 4 57-50-02 FIG 6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT561 | BOEING REFERENCE STANDARD 757 PT 4 57-50-02 FIG 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT562 | BOEING REFERENCE STANDARD 757 Part 4 57-25-01 Page 11 Figure 2. Material: Aircraft Qualtiy Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT563 | BOEING REFERENCE STANDARD 757 PT 6 57-51-04 FIGURE 2, SHEETS 1 & 2 PAGE 10. Includes Test Report and Certificate of conformance. | 2 | |
| NDT563 R&D | NDT563 R&D Standard w/ certs | 1 | |
| NDT564A | Boeing Standard 737 PT4 57-50-01 PG4 FG2 | 2 | |
| NDT564B | Boeing Standard 737 PT4 57-50-01 PG4 FG2 | 2 | |
| NDT566 | BOEING REFERENCE STANDARD 757 PT 4 54-50-03 FIGURE 2 PAGE 6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT567 | BOEING REFERENCE STANDARD 757 PT4 54-50-02 FIGURE 3 PAGE 8. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT567-G1 | Positioner, used with Boeing Standard NDT567, .645" Dimension 767 PT4 54-50-02 PG 9 FG 4 | 1 | |
| NDT567-G2 | Positioner, used with Boeing Standard NDT567, .680" Dimension 767 PT4 54-50-02 PG 9 FG 4 | 1 | |
| NDT568 | BOEING REFERENCE STANDARD 757 Part 6 57-51-05 Page 8 Figure 2. Material: 7050-T7. includes Test Report and Certificate of Conformance. | 2 | |
| NDT569 | Boeing Standard 757 PT6 53-40-07 PG 7 FG 2 | 1 | |
| NDT575 | Boeing Standard 757 PT6 53-60-12 PG 8 FG 2 | 1 | |
| NDT578 | Boeing Standard 757 PT6 55-10-04 PG 10 FG 2 | 1 | |
| NDT579 | BOEING REFERENCE STANDARD 757 Part 6 54-40-05 page 6 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT581 | BOEING REFERENCE STANDARD 757 PT 6 57-50-09 FIGURE 2 PAGE 7. Includes Test Report and Certificate of conformance. | 1 | |
| NDT582 | BOEING REFERENCE STANDARD 757 PT 6 57-50-08 Page 7 Figure 2. Material: 2024-T351 Aluminum Includes Test Report and Certificate of Conformance. | 2 | |
| NDT595 | Boeing Standard 757 PT4 53-80-02 PG 7 FG 2 | 1 | |
| NDT596 | Boeing Standard 757 PT4 52-30-01 PG 6 FG 2 | 2 | |
| NDT6000-EC | Boeing Standard 767 PT 4 57-50-02 PG10 FIG 4 | 2 | |
| NDT6000A | BOEING REFERENCE STANDARD 767 Part 4 57-50-02 Page 9 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6000B | BOEING REFERENCE STANDARD 767 Part 4 57-50-02 Page 9 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6000C | BOEING REFERENCE STANDARD 767 Part 4 57-50-02 Page 9 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6000D | BOEING REFERENCE STANDARD 767 Part 4 57-50-02 Page 9 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6000E | BOEING REFERENCE STANDARD 767 Part 4 57-50-02 Page 9 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6001 | Boeing Standard 767 PT4 57-50-23 PG7 FG2 *for TEK-5023 | 2 | |
| NDT6002 | Boeing Standard 767 PT4 57-50-24 PG7 FG2 *for TEK-5024 | 2 | |
| NDT6004 | Boeing Standard 767 PT4 57-50-09 PG 11 FG 2 | 2 | |
| NDT6005 | Boeing Standard 767 PT4 57-50-09 PG 12 FG 3 | 2 | |
| NDT6006 | Boeing Standard 767 PT4 57-50-09 PG 13 FG 4 | 2 | |
| NDT6007 | Boeing Titanium Reference Standard w/certs 767 PT4 57-50-11 PG 7 FG 2 | 2 | |
| NDT6008 | Boeing Titanium Reference Standard w/certs 767 PT4 57-50-11 PG 8 FG 3 | 2 | |
| NDT6009 | BOEING REFERENCE STANDARD 767 Part 4 52-30-03 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6010 | BOEING REFERENCE STANDARD 767 Part 4 52-30-02 Page 5 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6011 | Boeing Standard 767 PT4 57-50-20 PG 6 FG 2 | 2 | |
| NDT6012 | BOEING REFERENCE STANDARD 767 PT 4 57-50-26 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6013 | BOEING REFERENCE STANDARD 767 PT 4 57-50-26 FIGURE 3, PAGE 8. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6014 | Boeing Standard 767 57-50-16 PT4 | 2 | |
| NDT6015 | Boeing Standard 767 57-50-16 PT4 PG6 | 2 | |
| NDT6016 | BOEING REFERENCE STANDARD 767 Part 4 53-10-03 page 4 Figure 2. Material: 7075-T7 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6017 | Boeing Titanium Reference Standard w/certs 767 PT4 57-50-22 PG 6-7 FG 2 | 2 | |
| NDT6018 | Boeing Titanium Reference Standard w/certs 767 PT4 57-50-22 PG 8-9 FG 3 | 2 | |
| NDT6019 | Boeing Reference Standard 767 52-32-06 Fig. 2 | 2 | |
| NDT6020 | Boeing Standard 767 PT4 57-50-14 PG 11 FG 4 | 2 | |
| NDT6021 | Boeing Standard 767 PT4 57-50-14 PG 12 FG 5 | 2 | |
| NDT6022 | Boeing Standard 767 57-50-15 PT4 PG 5 FG2 | 2 | |
| NDT6023 | Boeing Standard 767 57-50-21 PT4 PG 5 FG 2 | 2 | |
| NDT6023P | Boeing Standard 767 57-50-21 PT4 PG 6 FG 3 | 2 | |
| NDT6024 | BOEING REFERENCE STANDARD 767 Part 6 57-50-10 Page 5 Figure 2. Material: 4330M. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6025-1 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6025-2 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6025-3 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6025-4 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6025-5 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6025-6 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6027 | Boeing Standard 767 PT4 57-50-10 PG 9 FG2 | 3 | |
| NDT6028 | Boeing Standard 767 PT4 57-50-10 PG 10 FG 3 | 3 | |
| NDT6029 | Boeing Standard 767 PT4 57-50-10 PG 11 FG 4 | 3 | |
| NDT6030 | Boeing Standard 767 PT4 57-50-10 PG 12 FG 5 | 3 | |
| NDT6031-1 | Boeing Standard 767 PT4 57-50-18 PG 5 FG 2 Used with TEK-5076-1 | 2 | |
| NDT6031-2 | Boeing Standard 767 PT4 57-50-18 PG 5 FG 2 Used with TEK-5076-2 | 2 | |
| NDT6031-3 | Boeing Standard 767 PT4 57-50-18 PG 5 FG 2 Used with TEK-5076-3 | 2 | |
| NDT6031-4 | Boeing Standard 767 PT4 57-50-18 PG 5 FG 2 Used with TEK-5076-4 | 2 | |
| NDT6032-1 | Boeing Standard 767 PT4 57-50-19 PG 5 FG 2 Used with TEK-5077-1 | 2 | |
| NDT6032-2 | Boeing Standard 767 PT4 57-50-19 PG 5 FG 2 Used with TEK-5077-2 | 2 | |
| NDT6032-3 | Boeing Standard 767 PT4 57-50-19 PG 5 FG 2 Used with TEK-5077-3 | 2 | |
| NDT6032-4 | Boeing Standard 767 PT4 57-50-19 PG 5 FG 2 Used with TEK-5077-4 | 2 | |
| NDT6033-1 | Boeing Standard 767 PT4 57-50-12 PG5 FG2 *for TEK-5078-1 | 3 | |
| NDT6033-2 | Boeing Standard 767 PT4 57-50-12 PG5 FG2 *for TEK-5078-2 | 2 | |
| NDT6034 | Boeing Reference Standard 767 PT4 57-50-13 PG7 FG 2 | 1 | |
| NDT6035-1 | Boeing Standard 767 PT4 57-50-13 PG8 FG3 | 1 | |
| NDT6035-2 | Boeing Standard 767 PT4 57-50-13 PG8 FG3 | 1 | |
| NDT6036 | REFERENCE STANDARD BOEING | 2 | |
| NDT6038 | Boeing Standard 767 PT4 57-50-25 PG6 FG2 *for TEK-5089-1 and -2 | 3 | |
| NDT6041 | REFERENCE STANDARD B767 4 57-20-03 | 3 | |
| NDT6045 | BOEING REFERENCE STANDARD 767 PART 4 54-50-08. MATERIAL: 7075-T6 or 7075-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6046 | Boeing Standard 767 53-30-02 PT4 PG 8 FG 2 | 3 | |
| NDT6047 | Boeing Standard 767 53-30-02 PT4 PG 9 FG 3 | 2 | |
| NDT6048 | BOEING REFERENCE STANDARD 767 Part 4 27-40-02 horizontal stab inspection. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6049 | Boeing Standard 767 PT4 57-20-09 PG 5 FG 2 | 3 | |
| NDT6050 | Boeing Standard 767 PT4 57-20-09 PG 5 FG 2 | 3 | |
| NDT6051 | Boeing Standard 767 PT4 57-20-09 PG 5 FG 2 | 3 | |
| NDT6052 | BOEING REFERENCE STANDARD 767 P4, 57-50-27. UT INSPECTION OF MAIN LANDING GEAR FORWARD TRUNNION SUPPORT SIDE LOAD FITTING | 1 | |
| NDT6052G | BOEING 767 6052 REFERENCE STANDARD GUIDE. DELRIN | 1 | |
| NDT6057 | BOEING REFERENCE STANDARD 767 PART 4 54-50-11 PAGE 7 FIGURE 2. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6058 | REFERENCE STANDARD B767 | 3 | |
| NDT6059 | REFERENCE STANDARD NDT | 3 | |
| NDT6060 | BOEING REFERENCE STANDARD 767 | 3 | |
| NDT6061 | BOEING REFERENCE STANDARD 767 | 3 | |
| NDT6062 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6063 | BOEING REFERENCE STANDARD 767 | 3 | |
| NDT6064 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6065 | BOEING REFERENCE STANDARD 767 PART 4 54-50-09 PAGE 12 FIGURE 2. MATERIAL: 2024-T3 OR 7075 SERIES ALUMINUM.. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6066 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 11. LUG B 4340M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6067 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 9. LUG A 4340M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6068 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 15. LUG D 4340M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6069 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 13. LUG C..4340M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT607 | BOEING REFERENCE STANDARD 767 Part 6 53-80-02 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6070 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 17. LUG E 4340M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6071 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 19. LUG F 4340M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6072 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 21. LUG H 4340M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6073 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 23. LUG G 4340M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6074 | BOEING REFERENCE STANDARD 767 PART 4 54-50-10 FIGURE 2 PAGE 7. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6075 | BOEING REFERENCE STANDARD 767 PART 6 53-10-22 FIGURE 2 PAGE 5. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6076 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6077 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6078 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6079 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT607A | BOEING REFERENCE STANDARD 767 Part 6 53-80-02 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6080 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6081 | BOEING REFERENCE STANDARD 767 PART 4 54-50-16 PAGE 5 FIGURE 2 MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6082 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 13 Figure 2. Material: 7075-T6 or 7075-T7, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6083 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 14 Figure 3. Material: 7075-T7 or 7075-T6, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6084 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 15 Figure 4. Material: 7075-T6 or 7075-T7, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6085 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 16 Figure 5. Material: 7075-T6 or 7075-T7, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6086 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 17 Figure 6. Material: 7075-T6 or 7075-T7, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6088 | BOEING REFERENCE STANDARD 767 PART 4 54-50-12 PAGE 9 FIGURE 2. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6089 | BOEING REFERENCE STANDARD 767 PART 4 54-50-15 PAGE 35-37 FIGURE 10 SHEETS 1-3. MATERIAL: 15-5PH STEEL.. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6090 | BOEING REFERENCE STANDARD 767 PART 4 54-50-15 PAGE 38-40 FIGURE 10 SHEETS 1-3. MATERIAL: 15-5PH STEEL.. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6091 | BOEING REFERENCE STANDARD 767 PART 4 54-50-14 PAGE 26 FIGURE 2. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6091G1 | NDT6091 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 26 FIGURE 2. | 1 | |
| NDT6091G2 | NDT6091 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 26 FIGURE 2. | 1 | |
| NDT6092 | BOEING REFERENCE STANDARD 767 PART 4 54-50-14 PAGE 27 FIGURE 3. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6092G1 | NDT6092 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 27 FIGURE 3 | 1 | |
| NDT6092G2 | NDT6092 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 27 FIGURE 3 | 1 | |
| NDT6094 | BOEING REFERENCE STANDARD 767 PART 4 54-50-14 PAGE 29 FIGURE 5. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6096 | BOEING REFERENCE STANDARD 767 PART 4 53-60-02 FIGURE 2 PAGE 6. MATERIAL: 2024-T3 ALUMINUM WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6099 | BOEING REFERENCE STANDARD PER MARKUP 767 PT 4 57-20-01 PAGE 4 FIGURE 2 | 2 | |
| NDT6100 | BOEING REFERENCE STANDARD 767 PART 4 57-10-03 PAGE 6 FIGURE 2 MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6103 | BOEING REFERENCE STANDARD 767 PART 4 54-50-17 PAGE 5 FIGURE 2. MATERIAL: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6105 | BOEING REFERENCE STANDARD 767 PT 6 53-50-16 PAGE 5 FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. Includes Certification Report | 1 | |
| NDT6108 | BOEING REFERENCE STANDARD 767 PT 4 57-20-03, Figure 4 Page 9. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6109 | BOEING REFERENCE STANDARD BOEING REFERENCE STANDARD 767 PART 6 57-20-01. Includes Test Report and Certificate of Conformance. MATERIAL: 7075-T6, 2024-T3 CLAD OR BARE ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT611 | BOEING REFERENCE STANDARD 767 PT 6 54-51-01 FIGURE 2 PAGE 8. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6110A | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110B | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110C | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110D | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110E | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6111A | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 Figure 5, Sheets 1-2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6111B | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 Figure 5, Sheets 1-2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT612 | Boeing Standard 767 PT6 54-51-02: FIG2 PG9 | 2 | |
| NDT613 | BOEING REFERENCE STANDARD 767 PT 6 54-51-01 FIGURE 2 PAGE 8. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT614 | REFERENCE STANDARD B767 4 57-20-01 | 3 | |
| NDT615 | BOEING REFERENCE STANDARD 767 PT 4 53-80-01 FIG 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT616 | BOEING REFERENCE STANDARD 767 Part 4 27-40-01 Page 4 Figure 2. Matierial: 7075-T7 (Preferred) or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT616P | REFERENCE STANDARD POSITIONER | 1 | |
| NDT617 | BOEING REFERENCE STANDARD 767 Part 6 53-80-03 Page 6 Figure 2. Material: 4330M or 4340M. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT618 | BOEING REFERENCE STANDARD 767 Part 6 53-80-03 Page 7 Figure 3. Material: 4330M or 4340M. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT618A | BOEING REFERENCE STANDARD 767 Part 6 53-80-03 Page 8 Figure 3. Material: 4330M or 4340M. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT619 | BOEING REFERENCE STANDARD 767 Part 4 55-10-04 Page 5 Figure 2. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT620 | BOEING REFERENCE STANDARD 767 Part 4 53-60-01 Page 5 Figure 2. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT621 | BOEING REFERENCE STANDARD 767 PT 4 57-10-01 page 4 fig.1. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT622 | REFERENCE STANDARD B767 657-20-01 | 4 | |
| NDT623 | REFERENCE STANDARD B767 4 57-10-03 | 3 | |
| NDT624 | BOEING REFERENCE STANDARD 767 Part 4 53-80-02 Page 6 Figure 2. Material: 7075-T6 or 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT625 | BOEING REFERENCE STANDARD 767 Part 4 55-10-03 Page 4 Figure 2. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT627 | BOEING REFERENCE STANDARD 767 Part 4 57-10-02 Page 5 Figure 3. Material: 7075-T6 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT628 | BOEING REFERENCE STANDARD 767 PT 4 53-50-01. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT629 | BOEING COMPOSITE REFERENCE STANDARD 767 PT 4 57-40-01. AULUMINUM to ALUMINUM HONEYCOMB CORE. Includes C-Scan Report and Certificate of Conformance. 2 year Unconditional Warranty. | 2 | |
| NDT630 | BOEING REFERENCE STANDARD 767 Part 4 55-10-02 Page 5 Figure 2. Material: Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT631 | BOEING REFERENCE STANDARD 767 Part 4 71-20-01 Page 6 Figure 2. Material: 15-5 PH or 4130, 4140, 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT632 | BOEING REFERENCE STANDARD 767 Part 4 71-20-01 Page 7 Figure 3. Material: 15-5 PH or 4130, 4140, 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT633 | BOEING REFERENCE STANDARD 767 Part 6 54-51-02 Page 9 Figure 2. Material: 4330, 4330M, 4340, 4340M. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT634 | BOEING REFERENCE STANDARD 767 Part 4 54-50-02 Page 5 Figure 2. Material: 15-5PH or 4330M, 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT636 | BOEING REFERENCE STANDARD 767 Part 4 32-10-03 Page 4 Figure 2. Material: 4140, 4330, 4340, 4330M, or 4340M. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT637 | BOEING REFERENCE STANDARD 767 Part 4 32-10-04 Page 7 Figure 2. Material: 4330 or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT638 | BOEING REFERENCE STANDARD 767 Part 4 57-40-02 Page 5 Figure 2. Material: 7075-T6 or 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT639 | BOEING REFERENCE STANDARD 767 Part 4 54-50-02 Page 6 Figure 3. Material: 15-5 PH or 4330M , 4340M. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT640 | BOEING REFERENCE STANDARD 767 Part 4 54-50-01 Page 5 Figure 2. Material: 15-5 PH or 4330M, 4340M. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT641 | BOEING REFERENCE STANDARD 767 Part 4 54-50-01 Page 6 Figure 3. Material: 15-5 PH or 4330M, 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT642 | BOEING REFERENCE STANDARD 767 Part 4 53-50-02 Page 6 Figure 2. Material: 7075-T6 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT643 | BOEING REFERENCE STANDARD 767 PT 6 57-20-03. Includes Test Report and Certificate of Conformance. | 5 | |
| NDT644 | BOEING REFERENCE STANDARD 767 PT 4 57-20-02. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT648 | Boeing Standard 767 PT6 53-30-06 PG 31 FG 3 | 3 | |
| NDT650 | BOEING REFERENCE STANDARD 767 Part 6 Page 4 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT651 | BOEING REFERENCE STANDARD 767, 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT652 | REFERENCE STANDARD B767 4 57-20-07 | 4 | |
| NDT655 | BOEING REFERENCE STANDARD 767 Part 4 54-50-03 Page 7 Figure 4. Material: 7075-T6 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT656 | BOEING REFERENCE STANDARD 767 Part 4 54-50-03 Page 8 Figure 3. Material: 7075-T6 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT657 | BOEING REFERENCE STANDARD 767 Part 6 53-10-09 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT658 | BOEING REFERENCE STANDARD 767 Part 4 53-10-01 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT660 | BOEING REFERENCE STANDARD 767 Part 6 53-80-04 Page 11 Figure 3. Material: 7075-T6 Bare and Clad. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT661 | BOEING REFERENCE STANDARD 767 Part 4 53-30-01 Page 5 Figure 2. Material: 7075-T6 or 7075-T7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT662 | BOEING REFERENCE STANDARD 767 PT 4 57-20-03, Figure 2 Page 7. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT663A | BOEING REFERENCE STANDARD 767 Part 6 53-10-13 Page 7 Figure 3. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT663B | BOEING REFERENCE STANDARD 767 Part 6 53-10-13 Page 7 Figure 3. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT664 | BOEING REFERENCE STANDARD 767 Part 6 57-20-06 Page 8 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT664-A | BOEING REFERENCE STANDARD 767 PART 6 57-20-06. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT665 | BOEING REFERENCE STANDARD 767 PT 6 53-10-06 PAGE 4 FIGURE 2. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT666A | BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 8 Figure 3. Material 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT666B | BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 9 Figure 4. Material 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT666C | BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 10 Figure 5. Material 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT667 | BOEING REFERENCE STANDARD 767 Part 4 54-50-05 Page 7 Figure 2. Material: 15-5 PH or 4130. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT668 | BOEING REFERENCE STANDARD 767 Part 6 57-50-01 Page 5 Figure 2. Material: 15-5 PH. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT669 | BOEING REFERENCE STANDARD 767 Part 4 3210-05 Page 5 Figure 2. Material: 4330 or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT670 | BOEING REFERENCE STANDARD 767 Part 4 53-10-02 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT671 | BOEING REFERENCE STANDARD 767 Part 6 53-30-12 Page 4 Figure 2. Material: 7075-T6 or 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT672 | BOEING REFERENCE STANDARD 767 Part 6 54-50-01 Page 4 Figure 2. Material: 15-5 PH or 4130. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT674 | BOEING REFERENCE STANDARD 767 PT 4 54-50-06 PAGE 14 FIGURE 3. Includes Certification Report. | 3 | |
| NDT675 | BOEING REFERENCE STANDARD 767 Part 4 54-50-06 Page 15 Figure 4. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT676 | BOEING REFERENCE STANDARD FOR PW4000 and JT9D-7R4D/E STRUTS FIGURE 2 Part 4 54-50-07 page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT679 | BOEING REFERENCE STANDARD 767 53-50-05 PT 4 FIG 3. Includes.Test Report and Certificate of Conformance. | 2 | |
| NDT680 | BOEING REFERENCE STANDARD 767 Part 4 32-10-06 Page 5 Figure 2. Material: 4340M. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT682 | BOEING REFERENCE STANDARD 767 Part 6 53-80-02 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT684 | BOEING REFERENCE STANDARD 767 Part 6 52-32-02 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT685 | BOEING REFERENCE STANDARD 767 Part 6 53-10-018 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT686 | BOEING REFERENCE STANDARD 767 Part 6 53-50-09 Page 5 Figure 3. Material: 7075-T6 or Equivalent. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT687 | BOEING REFERENCE STANDARD 767 PT 4 57-50-08 PAGE 6 FIGURE 3. . Includes Test Report and Certificate of Conformance. | 2 | |
| NDT688 | BOEING REFERENCE STANDARD 767 Part 4 57-50-03 Page 8 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance | 3 | |
| NDT689 | BOEING REFERENCE STANDARD 767 Part 4 57-50-06 Page 6 Figure 2. Material: 4340. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT689-P | REFERENCE STANDARD W | 3 | |
| NDT690 | BOEING REFERENCE STANDARD 767 PT 4 57-50-04 PAGE 8 FIGURE 3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT691 | BOEING REFERENCE STANDARD 767 Part 6 57-50-08 Page 6 Figure 2. Material: 4340M. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT693 | BOEING REFERENCE STANDARD 767 Part 4 53-50-04 Page 6 Figure 4. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT694 | BOEING REFERENCE STANDARD 767 Part 4 57-50-05 Page 8 Figure 3. Material: 15-5 PH. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT695 | BOEING REFERENCE STANDARD 767 Part 4 57-50-05 Page 8 Figure 3. Material: 15-5 PH. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT697 | BOEING REFERENCE STANDARD 767 Part 4 -57-50-07 Page 5 Figure 2. Material: 15-5 PH. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT698 | BOEING REFERENCE STANDARD 767 Part 4 57-50-03 Page 9 Figure 3. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT7001P | BOEING LUCITE WEDGE WITH A .315"Ø FLAT BOTTOM HOLE, 2.010" RADIUS FOR A .25"Ø STRAIGHT BEAM TRANSDUCER. USED WITH REFERENCE STANDARD NDT7001. | 1 | |
| NDT7005 | REFERENCE STANDARD NDT7005 BOEING777 | 2 | |
| NDT700A | Boeing Standard 767 57-50-04 | 1 | |
| NDT700B | Boeing Standard 767 57-50-04 | 1 | |
| NDT700C | Boeing Standard 767 57-50-04 | 1 | |
| NDT700D | Boeing Standard 767 57-50-04 | 1 | |
| NDT700E | Boeing Standard 767 57-50-04 | 1 | |
| NDT7014 | EDYCURRENT CALIBRATION STANDARD | 2 | |
| NDT7031A | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-14 PAGE 6 FIGURE 2. MATERIAL: 7055-T7751, OR AIRPLANE QUALITY ALUMINUM. INCLUDES TEST REPORT AND CE | 2 | |
| NDT7031B | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-15 PAGE 11-12 FIGURE 2, SHEET 1&2 AND PART 4 57-20-13 PAGE 6 FIGURE 2. MATERIAL: 7055-T7751, OR AIR | 2 | |
| NDT7031C | BOEING STANDARD , 777 PT4 57-20-15 PG 13 FG 2 | 2 | |
| NDT706P | Boeing Standard 777 PT6 53-10-01 PG6 FG3 | 3 | |
| NDT707 | Boeing Standard PT4 52-80-01 page 6 777 | 1 | |
| NDT713 | Boeing Standard 777 PT6 53-10-02:PG9 FIG2 SHEET1,2 | 1 | |
| NDT714 | Boeing Standard 777 PT6 53-10-03:PG6 FIG2 | 2 | |
| NDT725 | Boeing Standard 777 55-17-01 PT4 PG8-9 Fig 2 | 2 | |
| NDT729 | Boeing Standard 777 PT4 53-10-03 PG4 FG2 | 1 | |
| NDT730 | Boeing Standard 777 PT4 57-54-01 PG6 FG2 | 1 | |
| NDT731 | BOEING REFERENCE STANDARD 777 Part 4 53-40-01 Page 5 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT732A | Boeing Reference Standard 777 PT4 55-17-03 PG6 FG2 | 2 | |
| NDT733 | Boeing Reference Standard 777 PT4 53-40-03 PG7 FG2 | 2 | |
| NDT734 | Boeing Standard 777 PT4 57-54-02 PG8 FG4 | 2 | |
| NDT735 | Boeing Standard 777 PT4 53-40-02 PG6 FG2 | 2 | |
| NDT736 | BOEING 777 REFERENCE STANDARD PART 4 53-60-02 FIGURE 2 PAGE 6. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT737 | Boeing Standard 777 PT6 53-50-03 PG9 FG2 | 2 | |
| NDT737-X | REFERENCE STANDARD (NDT737-1, NDT737-2, NDT737-3 AND NDT737-4) | 1 | |
| NDT738 | Boeing Reference Standard 777 PT4 53-10-02 PG6 FG2 | 2 | |
| NDT739 | Boeing Reference Standard 777 PT4 53-10-02 PG7 FG3 | 2 | |
| NDT740 | Boeing Standard 777 PT4 53-10-01 PG6 FG2 | 2 | |
| NDT741 | Boeing Standard Boeing 777 PART4 57-12-01 page 7 | 2 | |
| NDT744 | BOEING REFERENCE STANDARD 777 Part 6 53-10-09 Page 4 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT745 | Boeing Standard 777 PT6 57-20-01 PG7 FG2 | 2 | |
| NDT746 | Boeing Standard 777 PT6 53-60-07 PG 7 Fig 2 | 2 | |
| NDT747-1 | Boeing Standard 777 PT6 53-00-11 PG 33 Fig 2 | 2 | |
| NDT747-2 | Boeing Standard 777 PT6 53-00-11 PG 34 Fig 3 | 2 | |
| NDT748 | Boeing Standard 777 PT4 54-51-01 PG 14 Fig 2 | 1 | |
| NDT749 | Boeing Reference Standard 777 PT6 57-20-03 PG 7 FG 2 | 2 | |
| NDT753 | BOEING REFERENCE STANDARD 777 Part 4 57-20-04 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT754 | Boeing Standard 777 PT6 53-80-03 PG 5 FG 3 | 2 | |
| NDT755 | Boeing Standard 777 53-60-07 PT6 PG 8 Fig 3 | 2 | |
| NDT756 | Boeing Standard 777 53-60-07 PT6 PG 9 Fig 4 | 2 | |
| NDT757 | Boeing Reference Standard 777 PT4 57-20-03 PG 7 FG 2 | 1 | |
| NDT760 | Boeing Standard 777 PT6 53-60-06 PG 6-7 FG 2 | 2 | |
| NDT761 | BOEING 777 REFERENCE STANDARD PART 4 53-80-01 FIGURE 2 PAGE 9. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT762 | BOEING 777 REFERENCE STANDARD PART 4 54-51-02 FIGURE 2 PAGE 8. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT763 | Boeing Standard 777 PT4 54-51-04 PG 7 FG 2 | 2 | |
| NDT766 | Boeing Standard 777, 57-10-02 PT4 pg9 | 2 | |
| NDT767 | BOEING REFERENCE STANDARD 777 PT 4 57-10-02 PAGE 11 FIGURE 3. IncludesTest Report and Certificate of Conformance. | 2 | |
| NDT768 | Boeing Reference Standard 777 PT4 57-10-01 PG 6 FG 2 | 2 | |
| NDT769 | Boeing Reference Standard 777 PT4 57-10-01 PG 7 FG 3 | 2 | |
| NDT770 | BOEING REFERENCE STANDARD 777 PART 4 57-20-05 PAGE 8 FIGURE 2. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT771 | BOEING REFERENCE STANDARD 777 Part 4 57-10-05 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT772 | Boeing Reference Standard 777 PT4 57-10-04 PG 18 FG 4 | 2 | |
| NDT773 | Boeing Reference Standard 777 PT4 57-10-04 PG 19 FG 5 | 2 | |
| NDT773-G1 | TRANSDUCER GUIDE THE TRANSDUCER GUIDE IS USED WITH REFERENCE STANDARD NDT773 ONLY | 2 | |
| NDT774 | BOEING REFERENCE STANDARD 777 Part 4 57-10-05 Pag e8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT775 | Boeing Reference Standard 777 PT6 54-51-15 PG 5 FG 2 | 1 | |
| NDT776 | Boeing Reference Standard 777 PT4 54-51-03 PG 7 FG 2 *make part out of 2024-T3, heat treat to 2024-T8 | 2 | |
| NDT779 | Boeing Reference Standard 777 PT4 55-51-01 PG 15 FG 3 | 1 | |
| NDT780-A | Boeing Standard 777 PT4 57-50-01 PG 7 FG 2, TEK-5828-1 | 1 | |
| NDT780-B | Boeing Standard 777 PT4 57-50-01 PG 7 FG 2, TEK-5828-2 | 1 | |
| NDT780-C | Boeing Standard 777 PT4 57-50-01 PG 7 FG 2, TEK-5828-3 | 1 | |
| NDT780-D | Boeing Standard 777 PT4 57-50-01 PG 7 FG 2, TEK-5828-4 | 1 | |
| NDT780-E | Boeing Standard 777 PT4 57-50-01 PG 7 FG 2, TEK-5828-5 | 1 | |
| NDT780-F | Boeing Standard 777 PT4 57-50-01 PG 7 FG 2, TEK-5828-6 | 1 | |
| NDT781 | Boeing Standard 777 57-40-02 PT6 PG 6 | 2 | |
| NDT786-A | Boeing Standard 777 PT6 57-10-04 PG 6 FG 2 | 2 | |
| NDT786-B | Boeing Standard 777 PT6 57-10-04 PG 6 FG 2 | 2 | |
| NDT786A | EDYCURRENT CALIBRATION STANDARD | 2 | |
| NDT787 | Boeing Standard 777 53-80-06 PT6 PG 8 FG 2 | 2 | |
| NDT789 | Boeing Standard 777 PT6 57-20-03 PG 17 FG 3 | 1 | |
| NDT790 | Boeing Standard 777 PT6 57-20-03 PG 18 FG 4 | 1 | |
| NDT791 | Boeing Standard 777 PT6 57-20-03 PG 19 FG 5 | 1 | |
| NDT792 | Boeing Standard 777 PT6 57-20-03 PG 20 FG 6 | 1 | |
| NDT797 | BOEING REFERENCE STANDARD 777-200/300 PART 4 53-40-06 PG.11 FIGURE 2. MATERIAL: 7075-T7 ALUMINUM WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT799 | BOEING REFERENCE STANDARD 757 Part 4 51-00-05 Page 7 Figure 2. 777-200/300 Part 4 51-00-05 Page 8 Figure 1. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT801 | BOEING REFERENCE STANDARD 787-8 51-13-02-00A-280A-A. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT803A | BOEING REFERENCE STANDARD ABS PLASTIC THICKNESS MEASUREMENT. PART 4 51-00-07 page 11 figure 2 | 2 | |
| NDT803B | BOEING REFERENCE STANDARD ABS PLASTIC THICKNESS MEASUREMENT. PART 4 51-00-07 page 11 figure 2 | 2 | |
| NDT809 | BOEING STANDARD 787 PT6 51-00-10 PG6 *still in the developing stages | 1 | |
| NDT811 | BOEING CALIBRATION STANDARD FIGURE 3 DETAIL II. MATERIAL: 2024-T351 ALUMINUM or 7075-T651 ALUMINUM. | 1 | |
| NDT813 | Reference Standard 0.200" Length x 0.040" Deep x 0.010" width; 6AL-4V | 1 | |
| NDT815 | BOEING REFERENCE STANDARD 787 Part 4 57-10-01 Page 10 Figure 2. Material: 2024 or 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT815-G1 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NDT815-G2 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815. | 1 | |
| NDT815-G3 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815. | 1 | |
| NDT815-G4 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NDT815-G5 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NDT815-G6 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NDT816 | BOEING REFERENCE STANDARD 787 part 4 57-10-02 Figure 2. MATERIAL: 6AL-4V TITANIUM. Includes Certification Report and Certificate of Conformance. | 2 | |
| NDT817 | BOEING REFERENCE STANDARD 787 Part 4 51-00-23 Page 5 Figure 2. Material: Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NEC-6151-SD | REFERENCE STANDARD - | 1 | |
| NEC-6252 | boeing ec reference standard w/cert | 1 | |
| NEC-6293-1 | SPECIAL PURPOSE EC REF STANDARD W/CERTS | 1 | |
| NRK-3AST | CUSTOM NAVY BLOCK SET, 3 Blocks Total. Materials: 7075-T6 Aluminum, 4340 Cres Steel and 6AL-4V Titanium. Each Standard Includes 20 Fastener Holes (.156-.750) Containing a total of 71 EDM Notches. All Standards Manufactured in Accordance with U.S.A.F. ... | 1 | |
| NRK-3X | STANDARD KIT | 1 | |
| NRK-CASE | CASE FOR EDDY CURRENT STANDARD TOOL | 1 | |
| NRM-003 | EXTENDED CANOPY COVER (standard windshield) | 1 | |
| Niton XL2T 980 GOLDD | Niton XL2T 980 GOLDD - Standard analytical range of + 25 elements, Light element detection (Mg-S), Modes for General Metals, Precious Metals, Mining and Plastics | 1 | |
| OBSRTU-SUB-1 | OBSRTU-SUB-1;One-year subscription for Observer Standard Right-To-Use License | 1 | |
| OBSRTU-SUB-3 | OBSRTU-SUB-3;Three-year subscription for Observer Standard Right-To-Use License | 1 | |
| OE X10B | WRENCH, COMBINATION, STANDARD LENGTH, 5/16IN, 12-POINT | 3 | |
| OE X12B | WRENCH,COMBINATION, STANDARD LENGTH, 3/8IN, 12-POINT | 4 | |
| OE X14B | WRENCH, COMBINATION, STANDARD LENGTH, 7/16IN, 12-POINT | 4 | |
| OEX10B | 5/16" STANDARD COMBINATION WRENCH | 3 | |
| OEX11B | 11/32" STANDARD COMBINATION WRENCH | 3 | |
| OEX12B | WRENCH,COMBINATION, STANDARD LENGTH, 3/8IN, 12-POINT | 4 | |
| OEX14B | WRENCH, COMBINATION, STANDARD LENGTH, 7/16IN, 12-POINT | 4 | |
| OEX16B | WRENCH, COMBINATION, STANDARD LENGTH, 1/2IN, 12-POINT | 4 | |
| OEX18B | WRENCH, COMBINATION, STANDARD LENGTH, 9/16IN, 12-POINT | 3 | |
| OEX20B | WRENCH, COMBINATION, STANDARD LENGTH, 5/8IN, 12-POINT | 3 | |
| OEX22B | 11/16" STANDARD COMBINATION WRENCH | 4 | |
| OEX24B | 3/4" STANDARD COMBINATION WRENCH | 5 | |
| OEX26B | 13/16" STANDARD COMBINATION WRENCH | 4 | |
| OEX28B | 7/8" STANDARD COMBINATION WRENCH | 4 | |
| OEX30B | 15/16" STANDARD COMBINATION WRENCH | 4 | |
| OEX32B | 1" STANDARD COMBINATION WRENCH | 4 | |
| OEX34B | 1-1/16" STANDARD COMBINATION WRENCH | 2 | |
| OEX36B | 1-1/8" STANDARD COMBINATION WRENCH | 3 | |
| OEX42B | WRENCH COMBINATION STANDARD LENGTH | 3 | |
| OEX46B | WRENCH COMBINATION STANDARD LENGTH | 2 | |
| OEX64A | TOOLING / WRENCH, COMBINATION, STANDARD LENGTH, 2, 12-POINT | 2 | |
| OEX724K | COMBO WRENCHES STANDARD 1/4-1 5/8 | 4 | |
| OEX8B | WRENCH, COMBINATION, STANDARD LENGTH, 1/4IN, 12-POINT | 5 | |
| OH58-300 | BLADE COVERS, standard type (set of 4) | 1 | |
| OM2-1522 | HI-LOK® STANDARD PROTRUSION GUAGES | 1 | |
| OM2-1522 HST | HI-LOK® STANDARD PROTRUSION GUAGES | 1 | |
| OMK-WLS-STD | OMK-WLS-STD;OMK Wireless Contractor Standard Package | 1 | |
| OPL5 | CARABINER, STANDARD LOCKING | 1 | |
| OPO5 | CARABINER, STANDARD OVAL | 1 | |
| OSH10B | Wrench, Combination, Standard Length, 5/16", 6-Point | 1 | |
| OSH11B | Wrench, Combination, Standard Length, 11/32", 6-Point | 1 | |
| OXD3307380K | OXD3307380K STANDARD 8 INCH VERNIER | 1 | |
| Olympus Phased Array Weld Inspection Kit | Olympus Phased Array Weld Inspection Kit - he kit contains the following items:, qty 2 A12 5L64 PA probes with 5m cable., qty 2 SA12 N55S Standard Wedge with Removable IHC Ring, qty 1 ‘Y’ Splitter 64/64, for Omniscan MX2, 5m split conduit, Irrigation Tubi | 1 | |
| P39 | ULTIMA STEEL HYDRAULIC HAND PUMP, S STANDARD PUMP | 10 | |
| P59 | PUMP P59-standard 1 speed 325psi 2-nd speed 10000psi | 3 | |
| P60507 | ENGINE, FULL, STANDARD AIR/TRUCK COVER | 1 | |
| P8-STD-P001MIDDLE | BOEING STANDARD MIDDLE PLATE ONLY | 1 | |
| P8-STD-P013 | Boeing Standard formally part number 55-10-04--B4 | 1 | |
| P8-STD-P033 | Boeing Standard 6AL-4V, 1.375 Diameter | 1 | |
| P8-STD-P034 | Boeing Standard 6AL-4V, 1.438 Diameter | 1 | |
| P8-STD-P035 | Boeing Standard 6AL-4V, 1.50 Diameter | 1 | |
| P8-STD-P036 | Boeing Standard 6AL-4V & 2024-T3 Muti-Layered. 20 Holes, 40 corner notches | 1 | |
| P8-STD-P037-AL | Boeing Standard 2024-T3 | 1 | |
| P8-STD-P037-TI | Boeing Standard 6AL-4V | 1 | |
| P8-STD-P039 | Boeing Standard TI-6AL-4V | 1 | |
| P801 | STANDARD P801 HAND PUMP | 5 | |
| PA24-200 | WING COVERS (standard wingtips), WINTER USE (set of 2) | 1 | |
| PA24-205 | WING COVERS (standard wingtips), ALL YEAR USE (set of 2) | 1 | |
| PA24-240 | WING COVERS (standard wingtips), hail protection type, WINTER USE (set of 2) | 1 | |
| PA24-245 | WING COVERS (standard wingtips), hail protection type, ALL YEAR USE (set of 2) | 1 | |
| PA24-900 | WINDSHIELD HEATSHIELD (standard windshield) | 1 | |
| PA31-100 | ENGINE INLET PLUGS (STANDARD MODEL) (set of 4) | 1 | |
| PAB050445ST | PALPEUR A ANGLE MINIATURE HARISONIC STANDARD SERIES 5.0 MHZ, 0.250"X O.250, 45 DEGREE SHEAR IN STEEL, RIGHT ANGLE MICRODOT CONNECTOR | 1 | |
| PASSCALDMM | STANDARD CALIBRATION CERTIFICATE NEW MULTIMETER | 1 | |
| PASSCALTHERM | STANDARD CALIBRATION CERTIFICATE | 1 | |
| PC7-100 | ENGINE PLUGS (standard design: Main Inlet & 3 smaller wedge plugs) (set of 4) | 1 | |
| PC7-HP1 | PITOT COVER (standard design) | 1 | |
| PDL 1030J | HERCULES C-130 UT CALIBRATION STANDARD FIGURE 17 SHEETS 1&2 20-40-00. FASTENER (HL18PB6-8, HL18PB6-6, HL70-6). Includes Test Report Traceable to NIST and Certificate of Conformance. | 2 | |
| PDL 1034/1040 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26, engrave per drawing Standard + Guide | 1 | |
| PDL 1034J/1040J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26 & PG27, engrave per drawing, Standard + Guide | 2 | |
| PDL 1037AJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 PAGE 30 FIG 20, 7075-T6 ALUMINUM | 1 | |
| PDL 1037BJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 PAGE 31 FIG 21, 7075-TG ALUMINUM | 1 | |
| PDL 1155 | CALIBRATION STANDARD FIGURE 3 FASTENER (BACB30NX12K11, BACB30NX14K8, HL1012-12) | 2 | |
| PDL 1214J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 22 | 2 | |
| PDL 1215J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 23 PAGE 33, 7075-T6 ALUMINUM | 2 | |
| PDL 1217AJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 24 PAGES 34, 7075-T6 ALUMINUM | 1 | |
| PDL 1217BJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 25 PAGE 35, CAST ACRYLIC SHEET | 1 | |
| PDL 1217CJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 26 PAGE 36, CAST ACRYLIC SHEET | 1 | |
| PDL 1253 | CALIBRATION STANDARD FIGURE 20-49 FASTENER (HLT114-6-8 + KFN542-3) | 1 | |
| PDL 1254J | Calibration Standard Figure 27 20-40-00 PG1 | 2 | |
| PDL 1257 | C130J Calibration Standard 20-40-00 Pg 1-2 Fg 22 | 1 | |
| PDL 1258 | C130J Calibration Standard 20-40-00 Pg 1 Fg 23 | 1 | |
| PDL 1259 | C130J Calibration Standard 20-40-00 Pg 1-2 Fg 24 | 1 | |
| PDL 389 | CALIBRATION STANDARD LM AERO | 1 | |
| PDL 389J | LOCKHEED C-130 CALIBRATION STANDARD 7075-T6 ALUMINUM FIGURE 1 | 2 | |
| PDL 419J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 2 PAGE 4, 2024-T3 ALUMINUM | 1 | |
| PDL 447J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 4, 7075-T6 ALUMINUM | 2 | |
| PDL 449J | LOCKHEED C-130 CALIBRATION STANDARD FIGURE 5, 7075-T6 ALUMINUM | 1 | |
| PDL 457AJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 6 PAGES 8&9 SHEET 1&2, 7075-T6 ALUMINUM | 2 | |
| PDL 457SJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 6 PAGES 8&9 SHEET 1&2, 4340 STEEL | 2 | |
| PDL 457SS | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 6 PAGES 8&9 SHEET 1&2 304 STAINLESS STEEL | 2 | |
| PDL 459J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 7 PAGE 10, 7075-T6 ALUMINUM | 1 | |
| PDL 601J | CALIBRATION STANDARD FIGURE 20-29 | 1 | |
| PDL 843J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 9 FASTENER (HL21-6-4 + TLN 1030.3) | 2 | |
| PDL 874 | CALIBRATION STANDARD 20-40-00 FIG 10 | 1 | |
| PDL 917 | LOCKHEED C 130 CALIBRATION STANDARD FIGURE 2 PAGE 14. 7075-T6 ALUMINUM OR EQUIVALENT. | 2 | |
| PDL 919 | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 11 SHEET 1&2, 7075-T6 ALUMINUM, FASTENERS (HL64PB-10-9, HLT114-6-8, HLT18PB-12, HL70) | 2 | |
| PDL 919J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 11 SHEET 1&2, 7075-T6 ALUMINUM, FASTENERS (HL64PB-10-9, HLT114-6-8, HLT18PB-12, HL70) | 1 | |
| PDL 920 | CALIBRATION STANDARD FIGURE 12 FASTENER (HLT114-6-8, HLPB8-8, HL18PB10-8, HL 206-4) | 2 | |
| PDL 920J | CALIBRATION STANDARD FIGURE 12 FASTENER (HLT114-6-8, HLPB8-8, HL18PB10-8, HL 206-4) | 1 | |
| PDL 941J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 13 PAGE 19, 7075-T6 ALUMINUM | 1 | |
| PDL 943J | CALIBRATION STANDARD FIGURE 14 PG.20 FASTENER (HL54-6-6, HL54-6-5, COLLAR (HL70-6) SMP-515-C NDI; 20-40-00, 7075-T6 ALUMINUM | 2 | |
| PDL 944-2J | CALIBRATION STANDARD FIGURE 15 FASTENER (HL40-6-5 + HL70-6, NAS6208-11 + KFN5428), 7075-T6 ALUMINUM | 2 | |
| PDL 944-J | CALIBRATION STANDARD FIGURE 15 FASTENER (HL40-6-5 + HL70-6, NAS6208-11 + KFN5428), 7075-T6 ALUMINUM | 1 | |
| PDL 958 | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 PAGE 23 FIGURE 16 2024-T3 ALUMINUM | 1 | |
| PDL389 | CALIBRATION STANDARD ALUMINUM | 1 | |
| PDL422 | STANDARD LASC | 1 | |
| PDL920 | CALIBRATION STANDARD FIGURE 12 FASTENER HLT114-6- | 2 | |
| PN 314150 | COUPLING, GREASE GUN, SHAFER TYPE NOZZLE - THREAD 1/8" NPTF(F)SIMILAR (WHICH COMPLY WITH STANDARD MS24203-1) | 1 | |
| POSITECTOR 6000 NS1 | STANDARD BODY, NON FERROUS PROBE, 0-1500UM | 2 | |
| POSITECTOR6000-NS1 | COATING THICKNESS GAUGE (STANDARD BODY, NON FERROUS PROBE, 0-1500UM) | 2 | |
| PRO-400B | LCNDT PRO-400B STANDARD INTENSITY, BROAD-BEAM LED UV + WHITE LIGHT LAMP, INCLUDES BATTERY, 110-220V | 1 | |
| PS-COTS-QSG | PS-COTS-QSG;One-day Onsite Standard QuickStart Services Training for Observer COTS | 1 | |
| PS-STANDARD-QUICKSTART-3 | PS-STANDARD-QUICKSTART-3;Three-Day Onsite Standard QuickStart Services Training | 1 | |
| PS4312-2H | STANDARD PAD | 1 | |
| PSD60-2R | UNIT TEST CARBURANT + Standard Accessories (cable 58345 + Operation Manual) | 27 | |
| PWA 75523 | STANDARD TOOL | 1 | |
| PWA101418 | STANDARD HEXHEAD, 8-32 X 1.5 INCH (38.1MM) | 3 | |
| PWA102805 | STANDARD SENSITIVIT | 1 | |
| PWA104625 | STANDARD SENSIVITY SETTING | 1 | |
| PWA21350-47 | STANDARD X-RAY | 1 | |
| PWA28403 | PRATT & WHITTNEY 1ST STAGE FAN BLADE CALIBRATION STANDARD WITH HOLDING BLOCK . Includes Test Report and Certificate of Conformance. | 4 | |
| PWA84306 | EDDY CURRENT STANDARD & CAL CARD | 1 | |
| PWA84314 | REFERENCE STANDARD FOR EDDY CURRENT TEST ON PW2000 SERIES ENGINE FAN BLADES | 1 | |
| QC6851 | STANDARD TOOL LEAK TRACKING INB'D WING ASSY | 1 | |
| QC7091/10.1MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 10.1mm hole standard 6AL-4V Ti | 1 | |
| QC7091/10.45MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 10.45mm hole standard Inconel 718 | 1 | |
| QC7091/10.5MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 10.5mm hole standard 4130 STEEL | 1 | |
| QC7091/10.6MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 10.6mm hole standard 6AL-4V Ti | 1 | |
| QC7091/10.8MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 10.8mm hole standard 4130 STEEL | 1 | |
| QC7091/11.1MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 11.1mm hole standard Inconel 718 | 1 | |
| QC7091/11.3MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 11.3mm hole standard 4130 STEEL | 1 | |
| QC7091/11.5MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 11.5mm hole standard Inconel 718 | 1 | |
| QC7091/12.7MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 12.7mm hole standard 4130 STEEL | 1 | |
| QC7091/12.93MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 12.93mm hole standard Inconel 718 | 1 | |
| QC7091/13.09MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 13.09mm hole standard Inconel 718 | 1 | |
| QC7091/13.5MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 13.5mm hole standard Inconel 718 | 1 | |
| QC7091/13.5MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 13.5mm hole standard 4130 STEEL | 1 | |
| QC7091/13.5MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 13.5mm hole standard 6AL-4V Ti | 1 | |
| QC7091/13.9MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 13.9mm hole standard 6AL-4V Ti | 1 | |
| QC7091/14.5MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 14.5mm hole standard Inconel 718 | 1 | |
| QC7091/14.6MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 14.6mm hole standard 4130 STEEL | 1 | |
| QC7091/15.3MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 15.3mm hole standard 4130 STEEL | 1 | |
| QC7091/15.3MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 15.3mm hole standard 6AL-4V Ti | 1 | |
| QC7091/2.8MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 2.8mm hole standard 6AL-4V Ti | 1 | |
| QC7091/2.9MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 2.9mm hole standard 6AL-4V Ti | 1 | |
| QC7091/24.1MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 24.1mm hole standard 6AL-4V Ti | 1 | |
| QC7091/25MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 25mm hole standard 4130 STEEL | 1 | |
| QC7091/27.8MM INCONEL 718 | Rolls Royce 50mm x 50mm x 6mm 27.8mm hole standard Inconel 718 | 1 | |
| QC7091/3.12MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 3.12mm hole standard Inconel 718 | 1 | |
| QC7091/3.1MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 3.1mm hole standard 4130 STEEL | 1 | |
| QC7091/4.1MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 4.1mm hole standard 4130 STEEL | 1 | |
| QC7091/4.2MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 4.2mm hole standard 6AL-4V Ti | 1 | |
| QC7091/4.65MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 4.65mm hole standard Inconel 718 | 1 | |
| QC7091/4.85MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 4.85mm hole standard Inconel 718 | 1 | |
| QC7091/5.95MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 5.95mm hole standard 4130 STEEL | 1 | |
| QC7091/6.15MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 6.15mm hole standard 6AL-4V Ti | 1 | |
| QC7091/6.1MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 6.1mm hole standard 4130 STEEL | 1 | |
| QC7091/6.35MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 6.35mm hole standard Inconel 718 | 1 | |
| QC7091/6.45MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 6.45mm hole standard 4130 STEEL | 1 | |
| QC7091/6.65MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 6.65mm hole standard Inconel 718 | 1 | |
| QC7091/6MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 6mm hole standard Inconel 718 | 1 | |
| QC7091/7.3MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 7.3mm hole standard 4130 STEEL | 1 | |
| QC7091/7.3MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 7.3mm hole standard 6AL-4V Ti | 1 | |
| QC7091/7.9MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 7.9mm hole standard 4130 STEEL | 1 | |
| QC7091/7MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 7mm hole standard Inconel 718 | 1 | |
| QC7091/7MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 7mm hole standard 4130 STEEL | 1 | |
| QC7091/8.2MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 8.2mm hole standard 6AL-4V Ti | 1 | |
| QC7091/8.5MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 8.5mm hole standard 6AL-4V Ti | 1 | |
| QC7091/8.98MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 8.98mm hole standard Inconel 718 | 1 | |
| QC7091/8.9MM STEEL 4130 | Rolls Royce 40mmx40mmx6mm 8.9mm hole standard 4130 STEEL | 1 | |
| QC7091/8MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 8mm hole standard 6AL-4V Ti | 1 | |
| QC7091/9.3MM INCONEL 718 | Rolls Royce 40mmx40mmx6mm 9.3mm hole standard Inconel 718 | 1 | |
| QC7091/9.3MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 9.3mm hole standard 6AL-4V Ti | 1 | |
| QC7091/9.7MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 9.7mm hole standard 6AL-4V Ti | 1 | |
| QC7091/9MM TITANIUM 6AL-4V | Rolls Royce 40mmx40mmx6mm 9mm hole standard 6AL-4V Ti | 1 | |
| QO-QTS-TI-03-001 | Air Force reference standard Detail#1. Material 7075-T6 Aluminum. EDM Notch size: .050" x .050" x .005" Max Width, 10 Flaws total. Includes Test Report and Certificate of Conformance. | 1 | |
| R&D-COND--STEEL-15-5 | BOEING STANDARD STEEL 15-5 | 1 | |
| R&D-COND-1-ABS-PLASTIC | BOEING STANDARD ABS PLASTIC | 1 | |
| R&D-COND-1-AL-2024-O | BOEING STANDARD AL 2024-O | 1 | |
| R&D-COND-1-AL-2024-T4(BARE) | BOEING STANDARD AL 2024-T4 BARE | 1 | |
| R&D-COND-1-AL-2024-T4(CLAD) | BOEING STANDARD AL 2024-T4 CLAD | 1 | |
| R&D-COND-1-AL-2024-T6X/T8X | BOEING STANDARD AL 2024-T6X/T8X | 1 | |
| R&D-COND-1-AL-2090-TX | BOEING STANDARD AL-2090-TX | 1 | |
| R&D-COND-1-AL-2219-T3 | BOEING STANDARD AL 2219-T3 | 1 | |
| R&D-COND-1-AL-6063-O | BOEING STANDARD AL 6063-O | 1 | |
| R&D-COND-1-COPPER | BOEING STANDARD COPPER | 1 | |
| R&D-COND-1-STEEL-15-5 | BOEING STANDARD STEEL 15-5 | 1 | |
| R&D-COND-1-STEEL-4340 | BOEING STANDARD STEEL 4340 | 1 | |
| R&D-COND-1-Ti-6AL-4V | BOEING STANDARD Ti-6AL-4V | 1 | |
| R&D-COND-2-2024-T4 (CLAD) | BOEING STANDARD 2024-T4 CLAD | 1 | |
| R&D-COND-2-2024-T4(BARE) | BOEING STANDARD AL 2024-T4 BARE | 1 | |
| R&D-COND-2-ABS-PLASTIC | BOEING STANDARD ABS PLASTIC | 1 | |
| R&D-COND-2-AL-2024-O | BOEING STANDARD AL 2024-O | 1 | |
| R&D-COND-2-AL-2024-T6X/T8X | BOEING STANDARD AL2024-T6X/T8X | 1 | |
| R&D-COND-2-AL-2090-TX | BOEING STANDARD AL 2090-TX | 1 | |
| R&D-COND-2-AL-2219-T3 | BOEING STANDARD AL-2219-T3 | 1 | |
| R&D-COND-2-AL-6063-O | BOEING STANDARD AL 6063-O | 1 | |
| R&D-COND-2-COPPER | BOEING STANDARD COPPER | 1 | |
| R&D-COND-2-STEEL-15-5 | BOEING STANDARD STEEL 15-5 | 1 | |
| R&D-COND-2-STEEL-4340 | BOEING STANDARD STEEL 4340 | 1 | |
| R&D-COND-2-Ti-6AL-4V | BOEING STANDARD Ti 6AL-4V | 1 | |
| R&D-COND-3-2024-T4(BARE) | BOEING STANDARD AL-2024-T4 BARE | 1 | |
| R&D-COND-3-ABS-PLASTIC | BOEING STANDARD ABS PLASTIC | 1 | |
| R&D-COND-3-AL-2024-O | BOEING STANDARD AL 2024-O | 1 | |
| R&D-COND-3-AL-2024-T4(CLAD) | BOEING STANDARD AL 2024-T4 CLAD | 1 | |
| R&D-COND-3-AL-2024-T6X/T8X | BOEING STANDARD AL 2024-T6X/T8X | 1 | |
| R&D-COND-3-AL-2090-TX | BOEING STANDARD AL 2090-TX | 1 | |
| R&D-COND-3-AL-2219-T3 | BOEING STANDARD AL 2219-T3 | 1 | |
| R&D-COND-3-AL-6063-O | BOEING STANDARD AL 6063-O | 1 | |
| R&D-COND-3-COPPER | BOEING STANDARD COPPER | 1 | |
| R&D-COND-3-STEEL-15-5 | BOEING STANDARD STEEL 15-5 | 1 | |
| R&D-COND-3-STEEL-4340 | BOEING STANDARD STEEL 4340 | 1 | |
| R&D-COND-3-Ti-6AL-4V | BOEING STANDARD Ti 6AL-4V | 1 | |
| R&D-COND-4-ABS-PLASTIC | BOEING STANDARD ABS PLASTIC | 1 | |
| R&D-COND-4-AL-2024-O | BOEING STANDARD AL 2024-O | 1 | |
| R&D-COND-4-AL-2024-T4(BARE) | BOEING STANDARD AL 2024-T4 BARE | 1 | |
| R&D-COND-4-AL-2024-T4(CLAD) | BOEING STANDARD AL 2024-T4 CLAD | 1 | |
| R&D-COND-4-AL-2024-T6X/T8X | BOEING STANDARD AL 2024-T6X/T8X | 1 | |
| R&D-COND-4-AL-2090-TX | BOEING STANDARD AL 2090TX | 1 | |
| R&D-COND-4-AL-2219-T3 | BOEING STANDARD AL 2219-T3 | 1 | |
| R&D-COND-4-AL-6063-O | BOEING STANDARD AL 6063-O | 1 | |
| R&D-COND-4-COPPER | BOEING STANDARD COPPER | 1 | |
| R&D-COND-4-STEEL-15-5 | BOEING STANDARD STEEL 15-5 | 1 | |
| R&D-COND-4-STEEL-4340 | BOEING STANDARD STEEL 4340 | 1 | |
| R&D-COND-4-Ti-6AL-4V | BOEING STANDARD Ti-6AL-4V | 1 | |
| R&D-SHEAR WAVE-EDGE-AL | BOEING STANDARD R&D SHEAR WAVE | 1 | |
| R&D-SHEAR WAVE-EDGE-TI | BOEING REFERENCE STANDARD R&D SHEAR WAVE EDGE | 1 | |
| R1011C | STANDARD LENGTH WRENCH | 3 | |
| R1012C | STANDARD LENGTH WRENCH | 1 | |
| R1214C | STANDARD LENGTH WRENCH | 4 | |
| R1618C | STANDARD LENGTH WRENCH | 5 | |
| R2022C | STANDARD LENGTH WRENCH | 4 | |
| R2024C | STANDARD LENGTH WRENCH | 1 | |
| R22-000 | BUBBLE COVER (STANDARD MODEL) | 1 | |
| R235 | 1/4" SOCKET BIT HOLDER WITH STANDARD RETAINING RING 1/4" SQUARE 1/4" FACOM | 1 | |
| R2426C | STANDARD LENGTH WRENCH | 2 | |
| R2428C | STANDARD LENGTH WRENCH | 2 | |
| R2830C | STANDARD LENGTH WRENCH | 2 | |
| R3032C | STANDARD LENGTH WRENCH | 1 | |
| R3436C | STANDARD LENGTH WRENCH | 1 | |
| R3840C | STANDARD LENGTH WRENCH | 1 | |
| R810C | STANDARD LENGTH WRENCH | 4 | |
| R857ELSV60 | BORESCOPE - RIGID (MEETS GENERAL ELECTRIC OR CFM STANDARD PRACTICES MANUAL SPECIFICATION SUCH AS: MODEL R857ELSV60) STD-10719 | 1 | |
| RAAU1A11 | C Clamp Locking Pliers With Standard Tip | 1 | |
| RADIUSED SHOE | Airbus Standard A340-500/-600 57-26-59-PB6 FIG. 57-26-59-991-003-A SHEET 01 PG. 15 | 1 | |
| RATCHET, SEALED HEAD (HIGH STRENGTH), STANDARD HANDLE, 4 7/16" | RATCHET, SEALED HEAD (HIGH STRENGTH), STANDARD HANDLE, 4 7/16" | 1 | |
| RBEM324U3010101 | STANDARD LANDING GEAR WHEEL REPLACEMENT DEVICE | 2 | |
| RBZ1214 | STANDARD O” OFFSET RATCHETING BOX WRENCH, 12 POINT 3/8-7/16” | 3 | |
| RCH3-T20-6AL4V | 3 hole countersink standard 7/32, 1/4, 9/32, .500 thick plate .020 deep notches on the CS and inside the hole, 6AL4V | 1 | |
| RD-KA5617-03 | STANDARD HS CRADLE | 1 | |
| RD11-01A | MD-11 REFERENCE STANDARD MDC-K5225 SECTION 2-1 PAGES 1-2, FIG 1.3 SHEETS 1&2. Includes Test Report and Certificate of Conformance. | 1 | |
| RD11-02 | MD REFERENCE STANDARD MDC-K5225 SECTION 2-1 FIG 1.6 | 1 | |
| RD11-03 | MD11 REFERENCE STANDARD MDC-K5225 SECTION 2-1 | 1 | |
| REBLING 7007 | STANDARD BATTERY DISCONNECT | 1 | |
| REFERENCE STANDARD, NDI, ALUMINUM 7050-T7451 | REFERENCE STANDARD FOR TASK 57-21-00-250-802-A00 | 1 | |
| RH1-M20-7075T6-1 | 1 hole standard .700" diameter hole, 2" x 2" x .5" thick 7075-T6, .020 deep x .060 long midwall notch | 1 | |
| RH12-T40-7075T6 | CALIBRATION REFERENCE STANDARD (CRS), ALUMINUM ALLOY, CONDUCTIVITY VALUE OF 35 TO 45 IACS THAT CONTAINS VARIOUS HOLE SIZES WITH 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (TECHNA NDTEQUIVALENT) | 1 | |
| RH18-T20-2024T3 | 18 hole standard 5/16, 11/32, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 19/32, 5/8, 21/32, 11/16, 23/32, 3/4, 25/32, 13/16, 7/8, 15/16 with .020 thru notches, 2024T3 Aluminum | 1 | |
| RH18.75-T20-7075T6 | 18 hole standard 5/16, 11/32, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 19/32, 5/8, 21/32, 11/16, 23/32, 3/4, 25/32, 13/16, 7/8, 15/16 with .020 +/- .002 thru notches .004 +/- .002 wide notches, 7075-T6 Aluminum .75" thick plate | 1 | |
| RH3-C30-304 | 3 hole standard .875,1.0 and 1.125 inch holes .250 thick plate .030 x .030 corner notch..304 | 1 | |
| RH3-C30-4340 | 3 hole standard .875,1.0 and 1.125 inch holes .250 thick plate .030x.030 corner notch..4340 | 1 | |
| RH3-C30-6AL4V | 3 hole standard .875,1.0 and 1.125 inch holes .250 thick plate .030x.030 corner notch..6AL4V | 1 | |
| RH3-C30-7075T6 | 3 hole standard 1.0 1.125 and 1.5 inch holes .250 thick plate .030x.030 corner notch | 1 | |
| RH3-T30-304 | 3 hole standard .875,1.0 and 1.125 inch holes .250 thick plate .030 thru notch..304 | 1 | |
| RH3-T30-4340 | 3 hole standard .875,1.0 and 1.125 inch holes .250 thick plate .030 thru notch..4340 | 1 | |
| RH3-T30-7075T6 | 3 hole standard .875,1.0 and 1.125 inch holes .250 thick plate .030 thru notch..7075T6 | 1 | |
| RH50-C30-7075T6 | Holes Standard 7/16in,1/2in,9/16in,3/4in,1.0in,.030 corner notch | 1 | |
| RH8-C30-2024 | STANDARD FOR OPEN HOPE INSPECTION | 1 | |
| RH80-C30-2024T3 | STANDARD FOR OPEN HOPE INSPECTION | 1 | |
| RH80-C30-7475T6 | 8 Hole calibration Standard 1/8 5/32 3/16 7/32 1/4 5/16 3/8 1/2 corner notch 0.30" | 1 | |
| RKC7135 | RETENTION GROOVE CUTTING TOOLS STANDARD AND FIRST OVERSIZE | 1 | |
| RKC7155 | RETENTION GROOVE CUTTING TOOLS STANDARD AND FIRST OVERSIZE | 1 | |
| RM120-C30-2024T3-1 | "EC REFERENCE STANDARD U8860405 | 1 | |
| RM120-C30T20-2024T3-1 | 12 HOLE STANDARD - HOLE SIZES; 3/16 INCH (4.74MM) 7/32 INCH (5.53MM) 1/4 INCH (6.35MM) 9/32 INCH (7.13MM) 5/16 INCH (7.92MM) 11/32 INCH (8.71MM) 3/8 INCH (9.52MM) 7/16 INCH (11.09MM) 1/2 INCH (12.7MM) 9/16 INCH (14.27MM) 5/8 INCH (15.87MM) 3/4 INCH (19.05 | 1 | |
| RM120-C30T20-7075T6-1 | 12 HOLE STANDARD - HOLE SIZES; 3/16 INCH (4.74MM) 7/32 INCH (5.53MM) 1/4 INCH (6.35MM) 9/32 INCH (7.13MM) 5/16 INCH (7.92MM) 11/32 INCH (8.71MM) 3/8 INCH (9.52MM) 7/16 INCH (11.09MM) 1/2 INCH (12.7MM) 9/16 INCH (14.27MM) 5/8 INCH (15.87MM) 3/4 INCH (19.05 | 1 | |
| RM140-C50-6AL4V | Multi Purpose Standard (6AL4V Titanium), 1/8" to 3/8" x 1/32" & 7/16", 1/2", 9/16", 5/8", 3/4" w/.050" Corner + 3 Surface Notches | 1 | |
| RM140-C50-7075T6 | Multi Purpose Standard (7075-T6 Aluminum), 1/8" to 3/8" x 1/32" & 7/16", 1/2", 9/16", 5/8", 3/4" w/.050" Corner + 3 Surface Notches | 1 | |
| RM140-C50-AS4340 | Multi Purpose Standard (6AL4V Titanium), 1/8" to 3/8" x 1/32" & 7/16", 1/2", 9/16", 5/8", 3/4" w/.050" Corner + 3 Surface Notches | 1 | |
| RM140-T40-4340 | Multi Purpose Standard (4340 Steel), 1/8" to 3/8" x 1/32" & 7/16", 1/2", 9/16", 5/8", 3/4" w/.040" Thru + 3 Surface Notches | 1 | |
| RM150-C20C30-2024T6 | 15 hole standard .020 comer notch for top top row of holes .030 corner notch for bottom row 2024T6 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1.0 | 1 | |
| RM150-C20C30-4340 | 15 hole standard .020 comer notch for top top row of holes .030 corner notch for bottom row 4340 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1.0 | 1 | |
| RM150-C20C30-6AL4V | 15 hole standard .020 comer notch for top top row of holes .030 corner notch for bottom row 6AL4V TI 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1.0 | 1 | |
| RM290-C30-4340 | MULTIPOLE STANDARD FOR 0 1/8 ATE 3/4 ROTOTESTE | 1 | |
| RM290-T20-2014T6 | multi-hole reference standard 29 holes 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 19/32, 5/8, 31/32, 11/16, 23/32, 3/4, 25/32, 13/16, 27/32, 7/8, 29/32 15/16, 31/32 0.020 deep through notch 3 surface flaws... | 1 | |
| RO2512-50SNP | SIOUX Signature Series Random Orbital Sander - 5" Pad / Standard Orbit | 1 | |
| RO2512-60SNP | SIOUX Signature Series Random Orbital Sander - 6" Pad / Standard Orbit | 2 | |
| ROMPAS | REFERENCE STANDARD ALUMINIUM 7075 T6-CONF ASTM E164 | 1 | |
| RRT048964 | ASSEMBLY TOOL (FOR SB 72-G262 STANDARD QUILL SHAFT) | 1 | |
| RRT062470 | WORKING STANDARD TUBE | 1 | |
| RS-0123-2024T3 | Surface Reference Standard .10" .020" .030" long 2024T3 | 1 | |
| RS-0123-7075T6 | Surface Reference Standard .010" .020" .030" long 7075T6 | 1 | |
| RS02051M-15-SHP | Surface Standard with .2, .5, 1mm Notches, 15-SHP Stainless, 100x50x10MM | 1 | |
| RS02051M-2024T3 | Surface Standard with .2, .5, 1mm Notches, 2024T3 | 1 | |
| RS02051M-2024T6 | Surface Standard with .2, .5, 1mm Notches, 2024T6 | 1 | |
| RS02051M-301 | Surface Standard with .2, .5, 1mm Notches, 301 Stainless | 1 | |
| RS02051M-303 | Surface Standard with .2, .5, 1mm Notches, 303 Austenitic Stainless, 36mmLx 20mmW x 2mmH | 1 | |
| RS02051M-304 | Surface Standard with .2, .5, 1mm Notches, 304 Stainless | 1 | |
| RS02051M-304L | Surface Standard with .2, .5, 1mm Notches, 304L Stainless | 1 | |
| RS02051M-4130 | Surface Standard with .2, .5, 1mm Notches, 4130 Steel, 36mmL x 20mmW x 2mmT | 1 | |
| RS02051M-4340 | Surface Standard with .2, .5, 1mm Notches, 4340 Steel | 1 | |
| RS02051M-6AL4V | Surface Standard with .2, .5, 1mm Notches, 6AL4V Titanium | 1 | |
| RS02051M-7075T6 | Surface Standard with .2, .5, 1mm Notches, 7075T6 | 1 | |
| RS02051M-7075T7 | Surface Standard with .2, .5, 1mm Notches, 7075T7 (40%IACS) | 1 | |
| RS02051M-I600 | Surface Standard with .2, .5, 1mm Notches, Inconel 600, Per A330, 51-63-01, PG601, FIG601 | 1 | |
| RS02051M-I718 | Surface Standard with .2, .5, 1mm Notches, Inconel 718, Per A330, 51-63-01, PG601, FIG601 | 1 | |
| RS02051M-MAG | Surface Standard with .2, .5, 1mm Notches, Magnesium | 1 | |
| RS05115M-304 | Surface Standard (metric), 304 stainless, with .5, 1 and 1.5 mm deep notches | 1 | |
| RS0512M-2024T3 | Surface Standard (Metric), .5mm, 1mm, 2mm, 2024-T3 aluminum | 1 | |
| RS0512M-2024T3-1 | Surface Standard (metric), 2024-T3 aluminum .5mm, 1mm and 2mm notches..80mm long x 35mm wide x 7mm thick, Width .1 +/- .05 | 1 | |
| RS0512M-304 | Surface Standard (Metric), .5mm, 1mm, 2mm, 304 Stainless | 1 | |
| RS0512M-304L | Surface Standard (Metric), .5mm, 1mm, 2mm, 304L Stainless | 1 | |
| RS0512M-4340 | Surface Standard (Metric), .5mm, 1mm, 2mm, 4340 | 1 | |
| RS0512M-6061-T4 | Surface Standard (Metric), .5mm, 1mm, 2mm, 6061-T4 | 1 | |
| RS0512M-6AL4V | Surface Standard (Metric), .5mm, 1mm, 2mm, 6AL4V Titanium | 1 | |
| RS0512M-7075T6 | Surface Standard (Metric), .5mm, 1mm, 2mm, 7075-T6 aluminum | 1 | |
| RS0512M-I600 | Surface Standard (Metric), .5mm, 1mm, 2mm, Inconel 600 | 1 | |
| RS0512M-MAG | Surface Standard (Metric), .5mm, 1mm, 2mm, Magnesium | 1 | |
| RS051M-6AL4V | Special Surface Standard with 2 notches, 1mm long x .5mm deep x .2mm wide..2mm long x 1.0mm deep x .2mm wide..100mm x 50mm x 5mm 6AL-4V | 1 | |
| RS0824-2024T3 | (B) SURFACE STANDARD .008"-.020"-.040" DEEP NOTCHES, 2024-T3 | 2 | |
| RS0824-316 | SURFACE REFERENCE STANDARD WITH CERTIFICATE TRACEABLE TO NIST. STAINLESS STEEL (316) WITH EDM NOTCH DEPTHS OF 0.008, 0.020 AND 0.040 INCHES, BLOCK OVERALL DIMENSIONS 1 X 4 0.25 INCHES. | 1 | |
| RS0824-T6AL4V | EC REFERENCE STANDARD WITH CERTIFICATE, EDM NOTCH DEPTHS 0.008 INCH (0.203MM), 0.020 INCH (0.508MM) AND 0.040 INCH (1.016MM), TITANIUM 6AL-4V. | 1 | |
| RS367SAL | NDT REFERENCE STANDARD 367 BOEING | 1 | |
| RS9000-1 | DC9 REFERENCE STANDARD PER BOEING SB DC9-54A031 PAGE 16 FIGURE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| RSAF-304 | PH TOOL REFERENCE STANDARD STAINLESS SPEC USAF TO 33-B-1-1 | 1 | |
| RSAF-T6AL4V | PH TOOL REFERENCE STANDARD TITANIUM SPEC USAF TO 33-B-1-1 | 1 | |
| RSDC6-5 | BOEING REFERENCE STANDARD DC6 | 1 | |
| RSM125/3.9 | Standard Rotary Probe | 1 | |
| RST2200 | ROLLER STAKING TOOLS STANDARD & FIRST OVERSIZE | 1 | |
| RST4265 | ROLLER STAKING TOOLS STANDARD & FIRST OVERSIZE | 1 | |
| RT115-015 | PARKER BAYSIDE: RT SERIES STEALTH MULTIDRIVE GEARBOX, RIGHT ANGLE, HOLLOW SHAFT, 115MM FRAME SIZE, 15:1 RATIO, STANDARD BACKLASH | 1 | |
| RT4550 | STANDARD AXLE-JACK (RT-DESIGN) - 45 TON | 1 | |
| RT4550-001 | STANDARD AXLE-JACK (45T) | 8 | |
| RT5.75-7075T6 | THIKNESS STANDARD 2.5/12.5MM | 1 | |
| RT6050 | STANDARD AXLE-JACK (60T) | 4 | |
| RT6050-001 | STANDARD AXLE JACK (60T) | 7 | |
| RT9050-001 | STANDARD AXLE-JACK (90T) | 7 | |
| RTY905025-11-90001 | STANDARD AXLE JACK 90T | 1 | |
| RV10-100 | ENGINE INLET PLUGS, Standard Cowling (set of 3) | 1 | |
| RYA1011 | WRENCH, RATCHETING BOX, 25° OFFSET, STANDARD LENGTH, 5/16IN-11/32IN, 12-POINT | 3 | |
| RYA1214 | WRENCH, RATCHETING BOX, 25° OFFSET, STANDARD LENGTH, 3/8IN-7/16IN, 12-POINT | 4 | |
| RYA810 | WRENCH,RATCHETING BOX,25 OFFSET.STANDARD LENGHT,1/4"-5/16",12- POINT | 3 | |
| S-17-1 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 1, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-2 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 2, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-3 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 3, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-4 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 4, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-5 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 5, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-6 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 6, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-7 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 7, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-8 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 8, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| S-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| S0143 | Fokker 50/60 Reference Standard PART 6 53-30-03 PAGE 9. Material: 2024-T3 Alclad Aluminum. | 1 | |
| S41-E1A | BOEING CUSTOM REFERENCE STANDARD MCU ESM S41-E1A NDI REF STD PER DRAWING SK667-00011. | 1 | |
| S41-E1C | BOEING CUSTOM REFERENCE STANDARD MCU ESM S41-E1C NDI REF STD PER DRAWING SK667-00012. | 1 | |
| S41-F1B | BOEING CUSTOM REFERENCE STANDARD MCU ESM S41-F1B NDI REF STD PER DRAWING SK667-00010. | 1 | |
| S46-C2 | BOEING REFERENCE STANDARD S42-C6 FIGURE 2. MATERIAL: 2024-T3 CLAD. RIVET: BACR15CE6. Includes Test Report and Certificate of Conformance | 1 | |
| S46-G1A/G2A | BOEING REFERENCE STANDARD FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. FASTENERS: BACR15CE6D 2 PLACES. Includes Certification Report. | 1 | |
| S53-10-103.3/1 | BAE 146-RJ SERIES REFERENCE STANDARD 53-10-25 PT 4 FIGURE 3&4 PAGES 7&8. Includes Test Report and Certificate of Conformance. | 1 | |
| S57-10-105.2/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-58 PT 6 FIGURE 7-9 PAGES 13-15. Material: 2024-T3 Includes Test Report and Certificate of Conformance. | 1 | |
| S57-10-105.2/2 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-58 PT 6 FIGURE 7-9 PAGES 13-15. Material: 2024-T3 Includes Test Report and Certificate of Conformance. | 1 | |
| S76-009 | FUSELAGE COVER, C-MODEL (standard config. w/ new VOR antennae position) | 1 | |
| S76-110 | ENGINE COVER, C-MODEL (standard config. w/ new VOR antennae position) | 1 | |
| S76-115 | INSULATED ENGINE COVER, C-MODEL (standard config. w/ new VOR antennae position) | 1 | |
| S76-210 | BLADE COVERS, S76D model, (Standard Type) (set of 4) | 1 | |
| S80A | STANDARD HND | 2 | |
| SA-455T | REF STANDARD AND PROBE | 1 | |
| SA00-N60S | WEDGE STANDARD (NDT) | 1 | |
| SA14E | SOCKET DRIVER HEX STANDARD 7/16 INCH | 1 | |
| SA18E | 1/2" DRIVE SAE 9/16" STANDARD HEX BIT SOCKET DRIVER | 1 | |
| SA20E | "1/2"" DRIVE SAE5/8"" STANDARD HEX BIT SOCKET DRIVER" | 1 | |
| SA24E | "1/2"" DRIVE SAE 3/4"" STANDARD HEX BIT SOCKET DRIVER" | 1 | |
| SAAB 5341-151-01I | REFERENCE STANDARD SAAB 340 FIG.1 5341-151-01I PART 4 PAGE 5. MATERIAL: 4140 CRES STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| SAAB 5512-332-03I | SAAB 340 REFERENCE STANDARD 5512-332-03I FIGURE 1 PAGE 2, 55-10-00 PART 6 PAGE 3. MATERIAL: 2024-T351 ALUMINUM WITH 4 HL10 VAP-6-7 HI-LOK FASTENERS.. Includes Test Reprort and Certificate of Conformance. | 1 | |
| SAHB-6 | STANDARD AIRCRAFT HANDBOOK- SEVENTH EDITION | 1 | |
| SB 146/53-167/2 | BAE 146-RJ SERIES REFERENCE STANDARD ISB.53-167 APPENDIX 2 DRAWING 15, PAGE 23&24. Material: Substitute 2024-T3 Clad for 2014A-T4 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| SB 57-3329 FIG.9 | Raytheon 12 Hole Standard Calibration Block Figure 9 Page 20, Service Bulletin SB 57-3329. Hole sizes 9/64, 11/64,3/16 and 13/64. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| SB09270209-5 | Eddy Current Inspection Reference standard SB DC9-27-209 R07 | 1 | |
| SB09270288-5 | NDT REFERENCE STANDARD - SB09270288-5 | 1 | |
| SB09530016-5 | Eddy Current Inspection Reference standard SB MD-A27-320 R01 | 2 | |
| SB09530016-5/303SS | DOUGLAS REFERENCE STANDARD 53-253, 303/SS | 1 | |
| SB09530016-5/AL | DOUGLAS REFERENCE STANDARD 53-253, 7075-t651 | 1 | |
| SB09530016-5/TI | DOUGLAS REFERENCE STANDARD 53-253, TITANIUM | 1 | |
| SB09530186-9 | Eddy Current Inspection Reference standard SB DC9-53-186 R06 | 1 | |
| SB09540030-5 | DC9 SURFACE REFERENCE REFERENCE STANDARD DC9-54-030. MATERIAL: 17-7 PH STAINLESS STEEL. EDM NOTCH: 0.002"-0.010" WIDE x 0.030" DEEP. | 1 | |
| SB09550023-17 | Douglas Reference Standard Assembly 55-23 Figure1 sheets 1-5, Pages 31-35. Material: 2024-T3 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 2 | |
| SB10270203-5 | Douglas Reference Standard Inboard Slat Drive Arm. Bulletin A27-203. Figure1 sheet 11, Pages 31-35. Material: HY-TUF or 4000 Series Steel CAD Plated. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| SB10550016-147 | DC-10 SERVICE BULLETIN REFERENCE STANDARD FIGURE 1 PAGE 14, SHEET 1. MATERIAL: 7075-T6 ALUMNIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| SBE2155-A01 | ADAPTOR TO BLEED COMPONENT STANDARD BIP DE-ACTIVATION SCREW LENGTH: 70CM/25.5470” | 1 | |
| SBE2155-A02 | ADAPTOR TO BLEED COMPONENT STANDARD EM/NEW BLEED DE-ACTIVATION SCREW LENGTH: 70CM/25.5470” | 1 | |
| SCA-1289.00 | HYDRO STANDARD B737 TAIL TRIPOD JACK | 1 | |
| SCA-7011 | HAND PUMP TO REFURBISH ENGINE OIL BASED ON STANDARD US CAN SIZES (1 US QT). | 2 | |
| SCCS14-21AI | Reference Standard 2-887-01-9315S | 1 | |
| SCCS3-7AI | Reference Standard 2-887-01-9319S | 1 | |
| SCH-002 | CANOPY/NOSE COVER, Standard Cirrus, all year use | 1 | |
| SD-BRACKET | CELESTE® SD-BRACKETN STANDARD ADHESIVE BACKED DEODORANT DISC BRACKET | 5 | |
| SDDP162 | STANDARD PHILLIPS (SIZE 20.13/32) | 1 | |
| SDDP62 | STANDARD PHILLIPS (SIZE 10.13/32) | 1 | |
| SDK-15 | SANDING DRUM & SLEEVE KITS STANDARD LOCK STYLE | 1 | |
| SE.4.44 | 328JET CALIBRATION STANDARD (SE.4.44); 51-60-01 PAGE 9/10 FIG.605 EDDY CURRENT | 1 | |
| SERVER2008UP | SERVER2008UP;Windows Server 2008 Upgrade from Standard OS - sold at time of purchase only | 1 | |
| SERVER2012R2 | SERVER2012R2;Windows Server 2012 R2 Standard OS - sold at time of purchase | 1 | |
| SGB 0.2150 | STANDARD GUN BARREL 0.2150 | 1 | |
| SGB 0.3100 | SGB 0.3100 STANDARD GUN BARREL 0.3100 | 1 | |
| SGB 15/64-0.2344 | STANDARD GUN BARREL 15/64-0.2344 | 1 | |
| SGB 17/64-0.2656 | SGB 17/64-0.2656 STANDARD GUN BARREL 17/64-0.2656 | 1 | |
| SGB 5-0.2055 | STANDARD GUN BARREL 5-0.2055 | 1 | |
| SGD2B | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 7/32" | 1 | |
| SGD4B | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 1/4" | 1 | |
| SGD6B | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 5/16" | 1 | |
| SGD8B | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 3/8" | 1 | |
| SGD8BR | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 3/8" | 2 | |
| SGDMRC44B | RATCHETING SOFT GRIP STANDARD RED SCREWDRIVER (RED) | 3 | |
| SGDMRC4A | SOFT GRIP STANDARD RATCHETING SCREWDRIVER HANDLE | 2 | |
| SGDP162BR | STANDARD PHILLIPS (SIZE 20.13/32) | 1 | |
| SGDP31IRB | SREWDRIVER, SOFT GRIP STANDARD PHILLIPS #1 | 1 | |
| SGDP31IRBG | PHILLIPS® #1 INSTINCT® SOFT GRIP STANDARD SCREWDRIVER (GREEN) | 1 | |
| SGDP42IRB | SREWDRIVER, SOFT GRIP STANDARD PHILLIPS #2 | 1 | |
| SGDP63IRB | SREWDRIVER, SOFT GRIP STANDARD PHILLIPS #3 | 1 | |
| SGDP64IRB | SREWDRIVER, SOFT GRIP STANDARD PHILLIPS #4 | 1 | |
| SGMRC44B | ATCHETING SOFT GRIP STANDARD SCREWDRIVER (RED) | 1 | |
| SGT4BR | DRIVER, STANDARD SHA | 2 | |
| SH80A | RATCHET, STANDARD HANDLE, COMFORT GRIP, 1/2" DRIVE, 12" LONG | 2 | |
| SHD10R | "FLAT TIP INSTINCT® HARD GRIP STANDARD SCREWDRIVER (RED)" | 2 | |
| SHD1R | HARD GRIP STANDARD SCREWDRIVER, FLAT TIP, 3 1/2" | 3 | |
| SHD4R | HARD GRIP STANDARD SCREWDRIVER, FLAT TIP, 8 7/8" | 2 | |
| SHD6 | STANDARD FLAT TOP SCREW DRIVER | 1 | |
| SHD8R | "FLAT TIP INSTINCT® HARD GRIP STANDARD SCREWDRIVER (RED)" | 2 | |
| SHDP421 | STANDARD CROSS SCREW DRIVER | 1 | |
| SHDP42IRR | PHILLIPS® #2 INSTINCT® HARD GRIP STANDARD SCREWDRIVER | 2 | |
| SHDP62IRR | STANDARD PHILLIPS (SIZE 10.13/32) | 2 | |
| SHDX60G | STANDARD SCREW CUTTER | 1 | |
| SHDX60O | STANDARD SCREW CUTTER | 1 | |
| SHDX60R | HARD HANDLE STANDARD SCREWDRIVERS SET | 2 | |
| SHLF80 | Ratchet, Dual 80®, Flex Head, Long Standard Handle, Comfort Grip, 1/2" drive, 25 3/4" | 1 | |
| SIGMATEST (D2-069) | CALIBRATION STANDARD SET (2 STDS.) 4.4 MS/M (8 IACS);58 MS/M (100 IACS) | 1 | |
| SJ-210 | STANDARD DRIVE UNIT SURFACE DETECTOR | 8 | |
| SK215T-10001 | CALIBRATION STANDARD NACELLE SUPPORT - FORK END & STRUT | 1 | |
| SK215T-10002 | STANDARD CALIBRATION NACELLE - SLOPING LONGERON | 1 | |
| SK601R-10022 | STANDARD CALIBRATION | 1 | |
| SK601R-30008A | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERED FASTENED ASSEMBLY, EQUIVALENT IN MATERIAL AND THICKNESS AS THE INSPECTION AREA CONTAINING SUBSURFACE ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 6 | |
| SK601R-30014 | CALIBRATION STANDARD REFERENCE | 2 | |
| SK601R-30039 | ULTRASONIC REF STANDARD TOOL | 2 | |
| SK601R30009-1 | CALIBRATION STANDARD BLANK | 5 | |
| SK601R30014 | REFERENCE STANDARD (CRJ200) | 2 | |
| SK601R30038 | REFERENCE STANDARD (CRJ200) | 1 | |
| SK601R−10043 | Calibration reference standard block (Bombardier Inc.) | 1 | |
| SL-210 | STANDARD DRIVE UNIT SURFACE DETECTOR | 1 | |
| SL80A | RATCHET, DUAL 80, LONG STANDARD HANDLE, 1/2" DRIVE, 15" | 2 | |
| SL90 KIT | Standard Lock Kit for A300/A320/A340 | 1 | |
| SLS-123456-SS304 | BOEING REFERENCE STANDARD PER DRAWING STD-1. MATERIAL: 304 STAINLESS STEEL. CHEMICAL CONVERSION COATING PER MIL-DTL-5541, CLASS 1A. Includes Certification Traceable to NIST and Material Certs. | 1 | |
| SM872400 | STANDARD NAME SELF-ADHESIVE LABEL; IN VINYL; 150X150MM | 1 | |
| SMO415431 | STARTING SKID STANDARD ASSEMBLY/REMOVAL TOOL (BAKER HUGHES) | 1 | |
| SMT-PRO-P-MS14101-9-MS14101-9 | STANDARD PORTABLE SWAGE CUTTER | 1 | |
| SMT-PRO-P-MS14103-6 | STANDARD PORTABLE SWAGER CUTTER AND IPR AND LOAD CELL SMT PRO KITS | 1 | |
| SMT-PRO-P-MS14103-7 | STANDARD PORTABLE SWAGER CUTTER AND IPR AND LOAD CELL SMT PRO KIT | 1 | |
| SN08530002-11 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET35 FIG16.1 | 1 | |
| SN08530002-13 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET36 FIG16.2 | 1 | |
| SN08530002-15 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET37 FIG16.3 - .063" CLAD | 1 | |
| SN08530002-17 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET37 FIG16.3 - .071" CLAD | 1 | |
| SN08530002-19 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET37 FIG16.3 - .080" CLAD | 1 | |
| SN08530002-21 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET37 FIG16.3 - .090" CLAD | 1 | |
| SN08530002-23 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET37 FIG16.3 - .125" CLAD | 1 | |
| SN08530002-25 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET38 FIG16.4 - .040" CLAD | 1 | |
| SN08530002-27 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET38 FIG16.4 - .050" CLAD | 1 | |
| SN08530002-29 | Douglas Standard w/ Certs, DC8:SN08530002 SHEET38 FIG16.4 - .063" CLAD | 1 | |
| SN09530002-03 | Douglas Standard w/ Certs, DC9:SN09530002 SHEET50 FIG23.0 | 1 | |
| SN09530002-15 | Douglas Standard w/ Certs, DC9:SN09530002 SHEET55 FIG24.0 | 1 | |
| SN09530002-23 | Douglas Standard w/ Certs, DC9:SN09530002 SHEET59 FIG25.0 | 1 | |
| SN09530004-3 | Douglas Standard w/ Certs, DC9:SN09530004 SHEET13 FIG2.0 & 2.1, -5 & -7 Layers | 1 | |
| SN10280002 | DOUGLAS REFERENCE STANDARD FIGURE 2 SHEETS 2-8. INCLUDES GANG CHANNEL PART NUMBER RMG9421-3-7-2. Test Report and Certificate of Conformance included. | 1 | |
| SN10280002-7001 | Douglas Standard w/ Certs | 1 | |
| SN10550000 | BOEING REFERENCE STANDARD SHEETS 1-4. DETAIL -3,-5,-7. MATERIAL: 7075-T7 & 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| SN15B | 1/2" DRIVE 15" STANDARD HANDLE BREAKER BAR | 4 | |
| SN18B | 1/2" DRIVE STANDARD 18" BREAKER BAR | 2 | |
| SN24C | 1/4 DRIVE 24" STANDARD HANDLE BREAKER BAR | 2 | |
| SN36 | /2" DRIVE 36" STANDARD HANDLE BREAKER BAR | 1 | |
| SO111-7 | Custom FOKKER F28 Horizontal Stab. Drive Junction Fitting Eddy Current Standard per drawing # 28. 0-3210/2610-Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| SOEX10 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 5/16", 12-POINT | 3 | |
| SOEX11 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 11/32", 12-POINT | 2 | |
| SOEX12 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 3/8", 12-POINT | 3 | |
| SOEX14 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 7/16", 12-POINT | 3 | |
| SOEX16 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 1/2", 12-POINT | 3 | |
| SOEX18 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 9/16", 12-POINT | 3 | |
| SOEX20 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 5/8", 12-POINT | 3 | |
| SOEX22 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 11/16", 12-POINT | 3 | |
| SOEX24 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 3/4", 12-POINT | 3 | |
| SOEX26 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 13/16", 12-POINT | 3 | |
| SOEX28 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 7/8", 12-POINT | 2 | |
| SOEX30 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 15/16", 12-POINT | 2 | |
| SOEX32 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 1", 12-POINT | 2 | |
| SOEX40 | WRENCH COMBINATION STANDARD 1-1/4" | 2 | |
| SOEX710 | STANDARD WRENCH (MAY OPEN) | 2 | |
| SOEX8 | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 1/4", 12-POINT | 4 | |
| SORFIT 146/151/1 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 53-20-96 PG 14&15 FIGURE 5&6. Includes Test Report and Certificate of Conformance. | 1 | |
| SORFIT 146/151/2 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 53-20-96 PG 14&15 FIGURE 5&6. Includes Test Report and Certificate of Conformance. | 1 | |
| SORFIT 146/154/1 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 6 53-20-95 PG 11 FIG 5. Includes Test Report and Certificate of Conformance. | 1 | |
| SORFIT 146/164/1 | BAE REFERENCE STANDARD 146 SERIES / AVRO-RJ SERIES PART 4 53-20-19 PG 9 FIG 5. Includes Test Report and Certificate of Conformance. | 1 | |
| SORFIT 146/166/1 | BAE REFERENCE STANDARD 146-RJ 53-238 53-30-15 PT 6 FIGURE 5&6 PAGES 9&10. Includes Test Report and Certificate of Conformance. | 1 | |
| SORFIT 146/166/2 | BAE REFERENCE STANDARD 146-RJ 53-238 53-30-16 PT 6 FIGURE 4-6 PAGES 8-10. Includes Test Report and Certificate of Conformance. | 1 | |
| SP-078 | CALIBRATION STANDARD BATS | 1 | |
| SP-096 | CALIBRATION STANDARD BATS 53-30-30 | 1 | |
| SP-115 | CALIBRATION STANDARD BATS | 1 | |
| SP32E | 1/2" DRIVE #3 PHILLIPS STANDARD BIT SOCKET DRIVER | 1 | |
| SP42E | 1/2" DRIVE #4 PHILLIPS STANDARD BIT SOCKET DRIVER | 9 | |
| SPECIALPARTREQ192380 | NON STANDARD CUSTOMER REQUESTED ITEM | 1 | |
| SPECTROLNF-Q210 | INCLUDING LNF Q210 OPTICAL PARTICAL, SOFTWARE, USER MANUAL CONNECTION CABLES AND POWER CORD, REQUIRES SA1015 STANDARD ACCESSORY KITS | 1 | |
| SPL1555-7-1 | BOEING STANDARD PUMP | 1 | |
| SPO-3932 | SLIDING PROBE CRACK STANDARD 2ND LAYER ALUMINUM - 1916915 -OLYMPUS | 1 | |
| SPP2305 | STANDARD DISPLAY BOARD | 1 | |
| SR-1 | STANDARD RESISTOR | 1 | |
| SR1MF | STANDARD ROTOR | 2 | |
| SRDH321 | 1/2" DRIVE 12 POINT SAE 1" STANDARD TORQUE ADAPTOR | 1 | |
| SRDH341 | 1/2" DRIVE 12 POINT SAE 1-1/16" STANDARD TORQUE ADAPTOR | 1 | |
| SRDH361 | 1/2" DRIVE 12 POINT SAE 1-1/8" STANDARD TORQUE ADAPTOR | 1 | |
| SRDH401 | 1/2" DRIVE 12 POINT SAE 1-1/4" STANDARD TORQUE ADAPTOR | 1 | |
| SRDH441 | 1/2" DRIVE 12 POINT SAE 1-3/8" STANDARD TORQUE ADAPTOR | 1 | |
| SRS-0824A | REFERENCE STANDARD FOR ECI, 6 ALUMINUM | 3 | |
| SRS-0824A/7050T74 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| SRS-0824A/7075T6 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| SRS-0824M | REFERENCE STANDARD FOR SURFACE INSPECTION | 1 | |
| SRS-0824M- AZ31B | EC REFERENCE STANDARD WITH CERTIFICATE, EDM NOTCH DEPTHS | 1 | |
| SRS-0824S | REFERENCE STANDARD FOR SURFACE INSPECTION | 3 | |
| SRS-0824S-4130 | SURFACE REFERENCE STANDARD WITH CERTIFICATE, STEEL (4130) WITH EDM NOTCH DEPTHS OF 0.008, 0.020 AND 0.040 INCHES. BLOCK OVERALL DIMENSIONS 1 X 4 X 0.25 INCHES . | 1 | |
| SRS-0824S-4340 | EC Reference. Wing to fuselage lateral attachement. Use to calibrate standard SRS-0824S to calibrate the instrument. | 1 | |
| SRS-0824SS | REFERENCE STANDARD FOR SURFACE INSPECTION | 1 | |
| SRS-0824SS-316 | SURFACE REFERENCE STANDARD WITH CERTIFICATE TRACEABLE TO NIST. STAINLESS STEEL (316) WITH EDM NOTCH DEPTHS OF 0.008, | 1 | |
| SRS-0824T | CALIBRATION TEST STANDARD (CTS) | 3 | |
| SRS-0824T-6AL- 4V | EC REFERENCE STANDARD WITH CERTIFICATE, EDM NOTCH DEPTHS | 1 | |
| SRS0824A | CALIBRATION TEST STANDARD (CTS) | 3 | |
| SRSM-2510A | ec reference standard w/certs | 1 | |
| SRSM-51020S/WLD | urface reference standard, 4340 Steel, with EDM notch depths of 0.5mm", 1.0" and 2.0mm +/-1.3mm1 (0.2mm, 0.51mm and 1.02mm), Notch Width: .18mm Max. Depth: +/- .03mm. Reference standard overall dImensions 25.4mm X 101.6mm X 6.4mm). Includes Test Report a | 1 | |
| SS TYPE 301 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 301 STAINLESS . SIZE: 1.5"W x 3.75"L x .25" | 2 | |
| SS TYPE 304 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 304 STAINLESS STEEL. SIZE: 1.5"W x 3.75"L x .25" | 1 | |
| SS-MT-A2AIF-SUPP-1YR | SS-MT-A2AIF-SUPP-1YR;Support for standard VIAVI Mobile Tech app2app interface - 1 inst / 1 yr | 1 | |
| SS-MT-SVRUPLD-SUPP-1YR | SS-MT-SVRUPLD-SUPP-1YR;Support for standard MTA Test Result Server upload feature - 1YR/INSTR | 1 | |
| SS137-F2 | NDT REFERENCE STANDARD EDDY CURRENT | 1 | |
| SSDMR4B | RACHETING STANDARD SCREWDRIVER (SNAP ON) | 4 | |
| SSDMR4B0 | 8-3/4" RATCHETING STANDARD SCREWDRIVER (ORANGE) | 2 | |
| SSDMR4BO | 8-3/4" RATCHETING STANDARD SCREWDRIVER (ORANGE) | 2 | |
| SSDMR4BR | 8-3/4" RATCHETING STANDARD SCREWDRIVER (RED) | 1 | |
| SSI 55-11-115/1 | BAE 146-RJ SERIES REFERENCE STANDARD 55-11-10 PT 6 FIGURE 6&7 PAGES 12&13. Includes Test Report and Certificate of Conformance. | 1 | |
| SSI 57-20-151/152A/153A/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-20-50 PT 6 FIGURE 6&7 PAGES 10&11. Includes Test Report and Certificate of Conformance. | 1 | |
| SSI57-20-151/152A/153A/2 | BAE 146-RJ SERIES REFERENCE STANDARD 57-20-50 PT 6 FIGURE 8&9 PAGES 12&13. Includes Test Report and Certificate of Conformance. | 1 | |
| SSINO54-10-03 | CALIB STANDARD BLOCK (TI) | 1 | |
| ST | STANDARD TOOL CUTTER - SCOTCHCAL MARKING MATERIAL | 1 | |
| ST10-907-H | STANDARD TOOL - CARBIDE TIPPED DRILL | 1 | |
| ST10-907-N-1285-1-44-26-REV N (.1285 DIA | #30 CARBIDE STANDARD BIT - | 1 | |
| ST10-907H | STANDARD TOOL - CARBIDE TIPPED DRILL | 1 | |
| ST1000-A-8252 | Standard Tool - Bucking Bar | 1 | |
| ST1000-A-8252-1 | Standard tool-bucking bar | 3 | |
| ST1000-A-8252-2 | Standard tool-bucking bar | 3 | |
| ST1000-A-8252-3 | Standard tool-bucking bar | 3 | |
| ST1000-A-8252-4 | Standard tool-bucking bar | 3 | |
| ST1000-A-8252-5 | Standard tool-bucking bar | 3 | |
| ST1060-20 | Standard Tool - Decompression Fork | 1 | |
| ST1065C | Standard Tool - Installation Tool, Grommet, NAS1368 | 6 | |
| ST1065C-10-1 | Standard Tool - Installation Tool Grommet | 1 | |
| ST1065C-6-1 | Standard Tool - Installation Tool Grommet | 1 | |
| ST1066-22 | STANDARD TOOL SEAL RETAINER ADJUSTMENT TOOL | 1 | |
| ST1066-24 | STANDARD TOOL-ASSEMBLY AID,GAP COVER SEAL 737 HORIZ STAB | 1 | |
| ST1066-26 | STANDARD TOOL - SEAL INSTALLATION TOOL | 1 | |
| ST1066-27 | STANDARD TOOL - SEAL INSTALLATION TOOL | 1 | |
| ST1066-7 | STANDARD TOOL-INSTALLATION TOOL DOOR BULB SEAL | 2 | |
| ST1066RB | Standard Tool - Release Key For Pivot Bin Snubber, "Boeing Sky" Interior | 3 | |
| ST1066RB-1 | Standard Tool - Release Key | 3 | |
| ST1069D | STANDARD TOOL GROMMET SET FOR INSTALLATION OF BAC-G20L | 1 | |
| ST1069D-249 | Standard tool grommet set for installation of BAC-G20L | 1 | |
| ST1069D-374 | Standard tool grommet set for installation of BAC-G20L | 1 | |
| ST1069D-431 | Standard tool grommet set for installation of BAC-G20L | 1 | |
| ST1157G | Standard tool rivet die，BACR15GA TI-CB t.e | 1 | |
| ST1212E | STANDARD TOOL - HOLE SAW | 1 | |
| ST1212E-1.5625 | STANDARD TOOL, HOLE SAW | 1 | |
| ST1212E-12500 | STANDARD TOOL -HOLE SAW | 1 | |
| ST1212E-1930 | Standard Tool Holesaw 1.930" Dia | 1 | |
| ST1212E-2988 | STANDARD TOOL HOLE SAW | 1 | |
| ST1212E-625 | HOLE SAW-STANDARD TOOL | 1 | |
| ST1212E-653 | Standard Tool Holesaw .653" Dia | 1 | |
| ST1212E-687 | Standard Tool Holesaw .687" Dia | 1 | |
| ST1212E-781 | Standard Tool Hole Saw .781" Dia | 1 | |
| ST1212E-812 | Standard Tool Hole Saw .8125" Dia | 1 | |
| ST1219Y-3RCA-3856-374-6-2-H-1 | STANDARD TOOL, REAMER | 1 | |
| ST1219Y3RCA3856-374-6-2H1 | STANDARD TOOL, REAMER | 1 | |
| ST1241BAC | STANDARD TOOL DRILL - THREADED SHANK FOR ANGLE MOTOR | 1 | |
| ST1257B | STANDARD TOOL - DRILL (CARBIDE), 4 FLUTES | 1 | |
| ST1257B-1250-300-1 | DRILL, STANDARD TOOL | 1 | |
| ST1257B1900-600-1 | 4 FLUTE SOLID CARBIDE STRAIGHT REAMER "DREAMER" UNDER BOEING STANDARD TOOL P/N: ST1257B SIZE: STRAIGHT SHANK, DIAMETER 0.190" LENGTH 6" | 1 | |
| ST13022B | TROLLEY MECHANICAL, STANDARD TOOLS | 1 | |
| ST1742C | Standard tool window seal installation | 1 | |
| ST1742C-A | STANDARD TOOL - WINDOW SEAL INSTALLATION | 2 | |
| ST1742C-A-1 | Standard Tool - Window Seal Installation | 1 | |
| ST1742F | STANDARD TOOL - 787 WINDOW INSTALL AND REMOVAL TOOL | 5 | |
| ST1742F-1 | STANDARD TOOL-787 WINDOW REM/I | 10 | |
| ST1813E | STANDARD TOOL - MISCELLANEOUS SCREWDRIVER BITS | 1 | |
| ST1813E-2 | Standard tool-misc.screwdriver bits | 3 | |
| ST1864P | Standard Tool Reamer - Carbide, Straight Flute, Piloted | 1 | |
| ST1864R | STANDARD TOOL - REAMER, CARBIDE, MULTI-STEP, STRAIGHT FLUTE | 1 | |
| ST1874R | PILOTED STEP REAMER UNDER BOEING STANDARD TOOL P/N: ST1874R SIZE: DIAMETERS 0.190" X 0.158" X 0.126", LENGTH 6" | 1 | |
| ST1876EA | STANDARD TOOL - BIN BUCKET QUICK RELEASE | 1 | |
| ST1876EA-1 | STANDARD TOOL - BIN BUCKET QUI | 5 | |
| ST2575A | Standard Tool - Torque Adapter | 5 | |
| ST2575C | STANDARD TOOL - FENWAL CONNECTORS, SLEEVE AND PIN PRESS TOOL, BAC5162-64 | 1 | |
| ST258/0-334C-1-185 | STANDARD TOOL - SPANNER NOSE PLIERS | 12 | |
| ST2580-1 | STANDARD TOOL - SPANNER NOSE PLIERS | 1 | |
| ST2580-104PA-12-61-.25 | Standard tool-deep socket variable | 2 | |
| ST2580-104PA-12-61-_25 | STANDARD TOOL-DEEP SOCKET VARIABLE | 2 | |
| ST2580-145 | STANDARD TOOL - SPANNER NOSE PLIERS | 1 | |
| ST2580-153 | Standard Tool - Spanner Wrench | 3 | |
| ST2580-185 | STANDARD TOOL - SPANNER NOSE PLIERS | 5 | |
| ST2580-251 | STANDARD TOOL - TORQUE WRENCH ADAPTER, 0.375 SLOT - 5-INCH OUTSIDE DIAMETER | 10 | |
| ST2580-267 | STANDARD TOOL - SPANNER WRENCH ADAPTER FOR BACN10RF NUTS | 15 | |
| ST2580-267-10 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-10-3-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-10-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-12-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-14-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-16-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-18-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-19-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-20 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-20-3-5-F | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-20-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-201-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-21-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-210-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-22-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-228-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-24-3-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 2 | |
| ST2580-267-24-4-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24-4-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-242-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-245-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-26-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 2 | |
| ST2580-267-26-4-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-28 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-28-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-29-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-32 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-32-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-36-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-40-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-48-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-60-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-285-8 | STANDARD TOOL-SPANNER WRENCH,FACE TYPE | 1 | |
| ST2580-286-3A | STANDARD TOOL-SPANNER WRENCH-224NUT AND RACE ENDS | 1 | |
| ST2580-286-8 | STANDARD TOOL - SPANNER WRENCH, FACE TYPE | 6 | |
| ST2580-286-8-K | Standard tool spanner wrench，face type | 1 | |
| ST2580-334 | Standard Tool-Spanner Nose Pliers | 1 | |
| ST2580-334C | STANDARD TOOL - SPANNER NOSE PLIERS | 3 | |
| ST2580-334C-1 | STANDARD TOOL - SPANNER NOSE PLIERS | 1 | |
| ST2580-334C-1-145 | Standard Tool - Spanner Nose Pliers | 13 | |
| ST2580-334C-1-145 -185 | Standard Tool -Spanner Nose Pliers | 1 | |
| ST2580-334C-1-185 | Standard Tool - Spanner Nose Pliers | 12 | |
| ST2580-334C-1-185 -1-145 | Standard Tool -Spanner Nose Pliers | 1 | |
| ST2580-381A | Standard tool-spanner wrench | 2 | |
| ST2580-436B | STANDARD TOOL TORQUE WRENCH BOX END FOR BACC63CP ELECTROCAL CONNECTOR | 1 | |
| ST2580-469-2-12-20 | Standard tool-wrench offset box end | 1 | |
| ST2580-469-2-12-20-B | Standard Tool - Wrench Offset Box End | 2 | |
| ST2580-469-2-24-40B | Standard tool-wrench offset box end | 1 | |
| ST2583-13 | STANDARD TOOL-WRENCH SPLINE DRIVE | 2 | |
| ST2587D | STANDARD TOOL-COTTER PIN INSERTION AND BENDING TOOL | 1 | |
| ST2589A | Standard tool-pliers cannon connectors bacc45 ft | 1 | |
| ST2598C | STANDARD TOOL - HOLDER TOOL FOR WALTER KIDDE ELECTRICAL CONNECTOR | 2 | |
| ST2598C-1 | Standard tool-holder tool for walter kidde electrical connector | 5 | |
| ST2598C-201 | Standard Tool - Holder Tool For Walter Kidde | 3 | |
| ST2613A | STANDARD TOOL-ASSEMBLY TOOLS,737 SLAT DOWNSTOP | 1 | |
| ST2850-334C | STANDARD TOOL - SPANNER NOSE PLIERS | 1 | |
| ST30-8783A-54 | STANDARD TOOL | 2 | |
| ST4130 | BOMBARDIER / CANADAIR EDDY CURRENT SURFACE REFERENCE STANDARD PART 6 55-20-001, NOTCHES .008", .020", .040" (.005" Wide +000 / - .002 and +/- .001" Depth), MATERIAL: 4130 STEEL. Includes certification Report and Certificate of Conformance(COC)... | 1 | |
| ST4330 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 4330 or 4340 STEEL. SIZE: 1.5"W x 3.75"L x .25". Includes certification Rep | 1 | |
| ST4340 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 4340 STEEL. SIZE: 1.5"W x 3.75"L x .25". Includes certification Report ... | 5 | |
| ST600-281 | STANDARD TOOL-VENTURI VENT | 1 | |
| ST6760 | STANDARD TOOL - ULTRASONIC LEAK PROBE TOOL | 1 | |
| ST6760A | STANDARD TOOL - ULTRASONIC LEAK PROBE TOOL | 2 | |
| ST7217J | STANDARD TOOL - ALIGNMENT PIN WITH WARNING STREAMER | 1 | |
| ST732 | Standard Tool Cutter - Scotchcal Marking Material | 1 | |
| ST732-190 | STANDARD TOOL CUTTER - SCOTCHCAL MARKING MATERIAL | 2 | |
| ST732-250 | STANDARD TOOL CUTTER - SCOTCHCAL MARKING MATERIAL | 1 | |
| ST732-312 | STANDARD TOOL CUTTER - SCOTCHCAL MARKING MATERIAL | 1 | |
| ST732-3121 | STANDARD TOOL CUTTER - SCOTCHCAL MARKING MATERIAL | 1 | |
| ST848 | Standard tool-installation tool "O" rings | 16 | |
| ST869EA-700 | Standard tool | 1 | |
| ST8709H | Standard Tool - Go No Go Gauge | 6 | |
| ST8709H-1 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 8 | |
| ST8709H-1 -2 -3 -4 -5 -6 -7 | Standard Tool -Go/No-Go Gauge. For Assembly Of Wiggins Bacc42R Coupling | 1 | |
| ST8709H-2 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-3 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-4 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 8 | |
| ST8709H-5 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-6 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-7 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 6 | |
| ST8709H-KIT | STANDARD TOOL - GO-NO-GO GAGE | 2 | |
| ST8709H-X | Standard Tool - G0 No Go Gauge | 2 | |
| ST8711J | STANDARD TOOL - GAUGE PROTRUSION, HEX DRIVE BOLT WITH LOCKBOLT COLLARS | 1 | |
| ST8711J-6 | Standard Tool - Gage Protrusion, Hex Drive Bolt | 1 | |
| ST8744 | Standard tool leak tracking inb'd wing assy | 2 | |
| ST8783-6 | STANDARD TOOL - ASSEMBLY, PROOF LOAD TEST EQUIPMENT, BACB10FB08GC BEARING INSTALLATION | 1 | |
| ST8783F | STANDARD TOOL - BEARING RETENTION PROOF TEST | 1 | |
| ST8783F-0625-035-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-0687-033-16 | Standard tool bearing retention proof test | 1 | |
| ST8783F-0688-033-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-0750-039-16 | Standard tool bearing retention proof test | 1 | |
| ST8783F-0781-039-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-0906-045-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-0969-054-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-1-1437-075 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-1563-084 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-1912-111 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-2065-111 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-2360-134 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1010-063-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1094-058-1 | Standard tool bearing retention proof test | 3 | |
| ST8783F-1218-068-1 | Standard tool bearing retention proof test | 2 | |
| ST8783F-1437-075-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1750-075-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1874-140-1 | Standard Tool-Bearing Retention Proof Test | 1 | |
| ST8783F-1899-140-1 | Standard Tool-Bearing Retention Proof Test | 1 | |
| ST8783F-1912-111-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1938-140-1 | Standard Tool-Bearing Retention Proof Test | 1 | |
| ST8783F-2360-134-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-2500-423-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-3000-150-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-812-437-16 | Standard tool bearing retention proof test | 1 | |
| ST878D | Standard Tool - Sleeveset for Presetting BACS13AP Flareless Tube Fittings | 8 | |
| ST8870-1 | Reference Standard ST8870-1 | 4 | |
| ST8870-1 & -4 | GR/EP skin to NOMEX core disdond defect standard GR/EP | 1 | |
| ST8870-4 | Reference Standard ST8870-4 | 4 | |
| ST8870-7 | STANDARD SAMPLE | 4 | |
| ST8870-8 | STANDARD SAMPLE | 5 | |
| ST8870-9 | STANDARD SAMPLE | 4 | |
| ST8870D | BOEING PERFORATED BONDED REFERENCE STANDARD ALUMINUM HONEYCOMB ALL PT4 78-30-01; PG.18 FIG.3 | 1 | |
| ST8871 | REFERENCE STANDARD COMPOSITE | 4 | |
| ST8871D | Reference Standard ST8871D | 4 | |
| ST918A | STANDARD TOOL MANDREL-BEARING-PRESSING BACB10A | 4 | |
| ST918A-1000-1750 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-1000-1875 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1000-1912 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1000-2500 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1180-2064 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1250-2360 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1375-2250 | Standard Tool - Mandrel, Bearing Pressing | 1 | |
| ST918A-1375-2562 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-2572 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-2582 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-2856 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-3500 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1378-2440 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1500-2812 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1500-3125 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1625-2964 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1750-3339 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1771-2952 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-190-500 | Standard Tool | 1 | |
| ST918A-190-625 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-190-777 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-2125-3592 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-605 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-625 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-250-656 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-687 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-250-689 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-250-750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-901 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-2500-3937 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-688 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-689 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-3000-5000 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-312-1250 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-312-750 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-312-781 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-312-783 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-312-812 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-375-1500 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-375-500 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-375-875 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-375-876 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-375-906 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-437-906 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-500-1000 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-500-1065 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1094 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1095 | STANDARD TOOL MANDREL, BEARING, PRESSING BACB10A | 1 | |
| ST918A-500-1687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-562-1187 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-562-1188 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-625-1062 | Standard Tool | 1 | |
| ST918A-625-1125 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-625-1187 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-625-1687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1437 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-750-1625 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1937 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918B-3-500-1687 | Standard tool mandrel bearing pressing BACB10B | 1 | |
| ST918C-250-901 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-312-1250 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-500-1625 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-625-1375 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-625-1937 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918D-750-1250-620 | Standard tool mandrel-bearing pressing BAC-B10D | 1 | |
| ST919 | STANDARD TOOL SUPPORT BEARING INSTALL | 3 | |
| ST919-1062 | Standard Tool | 1 | |
| ST919-1250 | Standard tool support bearing install | 3 | |
| ST919-1750 | Standard tool support bearing install | 1 | |
| ST919-1937 | Standard tool support bearing install | 1 | |
| ST919-625 | Standard tool support bearing install | 1 | |
| ST919-812 | Standard tool support bearing install | 1 | |
| ST919-875 | Standard tool support bearing install | 1 | |
| ST919-901 | Standard tool support bearing install | 3 | |
| ST920 | Standard tool mandrel nas press fit bushing installation tool | 1 | |
| ST921MA-4-8-22-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-4-28-ALL-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-5-31-ALL-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-6-33-ALL-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-8-22-P | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MA-6-9-22-ALL | Standard tool-tapered sleeve removal tool | 1 | |
| ST921MB | STANDARD TOOL - STRAIGHT SLEEVE | 1 | |
| ST922C-4 | Standard tool staking tool 1/4" bushing BACB28B-4 | 1 | |
| ST922C-5 | Standard tool staking tool 5/16 bushing BACB28B-5 | 2 | |
| ST922C-6 | Standard tool staking tool 3/8" bushing BACB28B-6 | 2 | |
| ST925-1771-2952 | Standard tool point staking tool bearing retention | 3 | |
| ST925-250-750 | Standard tool point staking tool bearing retention | 2 | |
| ST925-250-901 | Standard tool point staking tool bearing retention | 3 | |
| ST925-625-1062 | Standard Tool | 1 | |
| ST926B-601B | Standard tool roller staking tool-portable hand operated | 1 | |
| ST926C-1375-2250-2127 | Standard Tool - Roller Staking Tool | 2 | |
| ST926C-500-1218-1093 | Standard tool roller staking tool | 2 | |
| ST926C-750-1937-1809 | Standard tool roller staking tool | 1 | |
| ST926G | STANDARD TOOL - BEARING REMOVE/INSTALL/SWAGE, BEARING WITH GROOVE 0.500 TO 1.250-INCH RACE SWAGE (TYPE III) | 1 | |
| ST926G-1.75-.750-1.000-1.625 | BEARING REMOVE / INSTALL / SWAGE STANDARD TOOL | 1 | |
| ST926G-2125-750-12.5-2000 | Bearing R/I Swage, Standard Tool | 1 | |
| ST927AA-1 | STANDARD TOOL - BACB10CN3 BEARING REMOVAL TOOL | 1 | |
| ST927AA-2 | STANDARD TOOL - BACB10AG4MC BEARING REMOVAL TOOL | 1 | |
| ST927C | STANDARD TOOL - BEARING REMOVAL TOOL | 4 | |
| ST927C-10 | Standard tool-bearing removal tool | 5 | |
| ST927C-108 | Standard tool-bearing removal tool | 1 | |
| ST927C-11 | Standard tool-bearing removal tool | 4 | |
| ST927C-114 | Standard Tool - Bearing removal | 1 | |
| ST927C-136 | Standard tool-bearing removal tool | 4 | |
| ST927C-139 | Standard tool-bearing removal tool | 5 | |
| ST927C-142 | Standard tool-bearing removal tool | 4 | |
| ST927C-20 | Standard tool-bearing removal tool | 1 | |
| ST927C-5 | Standard tool-bearing removal tool | 5 | |
| ST927C-81 | Standard tool-bearing removal tool | 4 | |
| ST927J | STANDARD TOOL - HOLE SAW, BEARING REMOVAL | 1 | |
| ST928 | STANDARD TOOL - ROLLER STAKING TOOL, ALUMINUM SLEEVE | 1 | |
| ST928-A | STANDARD TOOL - ROLLER SWAGING, ALUMINUM SLEEVE 69-38919 | 1 | |
| ST928D | Standard tool-roller swage，bearing sleeve | 1 | |
| ST928G | STANDARD TOOL - ROLLER SWAGING ACCESSORIES FOR ST928 | 1 | |
| ST928H | STANDARD TOOL - BEARING REMOVE/INSTALL/SWAGE, SLEEVE OUTSIDE DIAMETER 1.33 THRU 2.25-INCH SLEEVE TYPE | 1 | |
| ST929-1A | STANDARD TOOL - ROLLER SWAGING SLEEVE BEARING | 1 | |
| ST929-1A-1250-2000 | Standard tool-roller swage sleeve bearing | 1 | |
| ST929-1A-250-901 | Standard tool-roller swage sleeve bearing | 1 | |
| ST929-2A | STANDARD TOOL.BEARING SLEEVE.STAKING TOOL 3 POIINT | 1 | |
| ST929-2A-2000-1250 | Standard tool bearing sleeve staking tool 3 point | 1 | |
| ST929-2A-3500-1375 | Standard tool bearing sleeve staking tool 3 point | 1 | |
| ST929-2A-4800-2500 | Standard tool bearing sleeve staking tool 3 point | 1 | |
| ST929-2A-5000-3000 | Standard tool bearing sleeve staking tool 3 point | 1 | |
| ST929-2C | STANDARD TOOL STAKING TOOL BEAKING SLEEVE.6 POINT. | 1 | |
| ST929-2C-250-750-28 | Standard tool | 1 | |
| ST929-2C-250-750-281 | Standard tool | 1 | |
| ST929H | STANDARD TOOL-BEARING REMOVAL/INSTALL/SWAGE.SLEEVE | 1 | |
| ST930-LT-375-906-801 | Standard tool load test-bearing BAC 5435 | 1 | |
| ST930C | STANDARD TOOL - ANVIL SWAGING TOOL | 1 | |
| ST930C-250-656-1 | Standard tool-anvil swaging tool | 4 | |
| ST930C-250-687-1 | Standard tool-anvil swaging tool | 3 | |
| ST930C-250-688-1 | Standard tool-anvil swaging tool | 1 | |
| ST930C-250-689-1 | Standard tool-anvil swaging tool | 2 | |
| ST930C-375-687-Ⅲ | STANDARD TOOL-ANVIL SWAGING TOOL | 1 | |
| ST931 | STANDARD TOOL - BALL POINT MULTIPLE - BEARING STAKING TOOL | 1 | |
| ST931-1000-1750 | Standard tool | 1 | |
| ST931-190-500 | Standard tool,ball point multiple-bearing starking tool | 1 | |
| ST931-250-625 | Standard tool | 1 | |
| ST931-250-750 | Standard tool,ball point multiple-bearing starking tool | 2 | |
| ST931-375-875 | Standard tool | 1 | |
| ST931-625-1937 | Standard tool | 1 | |
| ST931D-250-625 | Standard tool | 1 | |
| ST932-750-1187-1-2 | Standard Tool | 1 | |
| ST932-750-1375-1-2 | STANDARD TOOL | 1 | |
| ST932-C-235 | Standard Tool | 1 | |
| ST932-C-297 | Standard Tool | 1 | |
| ST933-2250-1250 | Standard tool swagong tool housing bearing ring lock | 1 | |
| ST937D-1 | STANDARD TOOL - ANVIL SWAGE NACELLE SUPPORT FITTINGS | 1 | |
| ST9501B | STANDARD TOOL -0 ALIGNMENT PIN | 2 | |
| ST9503-1 | Standard Tool - Universal Flap Peen Tool Kit | 1 | |
| ST982L-9 | Standard tool-scraper：sealant not for use on clad aluminum | 5 | |
| ST982LF-9 | Standard tool-scraper：sealant not for use on clad aluminum | 4 | |
| ST990-A | Standard tool | 1 | |
| ST991A | Standard tool-wedge seal installation | 5 | |
| ST991A-2 | STANDARD TOOL - REMOVAL TOOL, SCRIVET FASTENER | 10 | |
| ST991A-2-250 | STANDARD TOOL - REMOVAL TOOL，SCRIVET FASTENERS AND BACB31 SLEEVE BOLTS | 10 | |
| ST991A-2-312 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 4 | |
| ST991A-2-375 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-438 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-500 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-563 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-625 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-750 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A-2-875 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 1 | |
| ST991A2 | STANDARD TOOL - | 10 | |
| ST991NB-1 | Standard tool-spreader，sealant application | 2 | |
| ST9999-VBA-201 | Standard tool-vacuum generator multiple venturi | 3 | |
| ST9999-VBA-301 | STANDARD TOOL VACUUM | 1 | |
| ST9999ART | Standard tool-aerostrip removal tool | 3 | |
| ST9999CL | STANDARD TOOL COWL LATCHING | 3 | |
| ST9999CL-1 | Standard Tool, Cowl Latching Assy | 1 | |
| ST9999CL-201 | STANDARD TOOL - COWL LATCHING ASSEMBLY, ENGINE COWL FAN | 5 | |
| STANDARD-B | 2/64" FLAT BOTTOM HOLE EQUIVALENT SURFACE NOTCH STANDARD (*ABOVE DESCRIPTION MUST BE ENGRAVED ON THE REFERENCE STANDARD) ..DRAWING "B" (PS21211.3 FOR F/A-18 OUTER WING FORWARD SPAR) MATERIAL=7075-T6 | 1 | |
| STANDARD-C | MIL-STD-2154A, STANDARD ULTRASONIC TEST BLOCK FOR AGNLE BEAM EXAMINATION, 7075-t6 | 1 | |
| STD-1--AL | Custom Radius Channel Standard Material: 7075-T651 ALUMINUM. Standard to include a total of 62 EDM flaws identified as A, B,C, D, E, and F in the drawing. Includes test report traceable to NIST standards which comply with MIL-Q-9858A, Mil-4-45208A. | 1 | |
| STD-1-TI | Custom Radius Channel Standard Material: 6AL-4V Titanium. Standard to include a total of 62 EDM flaws identified as A, B,C, D, E, and F in the drawing. Includes test report traceable to NIST standards which comply with MIL-Q-9858A, Mil-4-45208A. | 1 | |
| STD-6760 | WRENCH STANDARD 5/8 INCH | 1 | |
| STD-CAL-1 | STD-CAL-1;1yr. Renewal Standard Term Calibration Contract - Existing Equipment | 1 | |
| STD-REPAIR-AGREEMENT | STD-REPAIR-AGREEMENT;Standard repair charges for Key Account Repair/Frame Agreement | 1 | |
| STI3022 | BOX MECHANICAL STANDARD TOOLS | 1 | |
| STI3022B | BOX MECHANICAL, STANDARD TOOLS (SNAP-ON) | 1 | |
| STI3217 | STANDARD TOOLS (SNAP-ON) BOX MECHANICAL | 1 | |
| STI3217-A | STANDARD TOOLS KIT, MECHANICAL | 1 | |
| STI3218 | STANDARD TOOLS BOX ELECTROAVIONIC | 1 | |
| STI3219 | BOX REPAIR, STANDARD TOOLS | 1 | |
| STR/146/RIT/5089 | BAE 146-RJ SERIES REFERENCE STANDARD 53-20-26 PT 6 FIGURE 6&7 PAGES 12&13. Includes Test Report and Certificate of Conformance. | 1 | |
| STR/146/RP/5139 | BAE 146-RJ SERIES REFERENCE STANDARD 57-55-09 PT 6 FIGURE 6&7 PAGES 12&13. Includes Test Report and Certificate of Conformance. | 1 | |
| ST‐03‐65 | STANDARD SOCKET 1" | 1 | |
| SUC-169 | STANDARD CONTACT TRANSDUCER | 2 | |
| SUC169 | STANDARD CONTACT TRA | 2 | |
| SUS921L | STANDARD TOOL - BUCKING BAR | 2 | |
| SW1-000 | CANOPY COVER (STANDARD CANOPY) | 1 | |
| SW1-020 | EXTENDED CANOPY COVER (STANDARD CANOPY) | 1 | |
| SW1-800 | TRAVEL COVER, Light Weight Canopy Cover (STANDARD CANOPY) | 1 | |
| SW121A | SOCKET, SHALLOW 1/2" DRIVE STANDARD 3/8" | 3 | |
| SW141A | SOCKET, SHALLOW 1/2" DRIVE STANDARD 7/16" | 2 | |
| SW161A | SOCKET, SHALLOW 1/2" DRIVE STANDARD 1/2" | 2 | |
| SW181A | SOCKET, SHALLOW 1/2" DRIVE STANDARD 9/6" | 2 | |
| SW32E | SNAP-ON 1/2" DRIVE 1/2" FLAT TIP STANDARD BIT SOCKET DRIVER | 1 | |
| SWEEF1 | REFERENCE STANDARD | 1 | |
| SWREF1 | COMPOSITE STANDARD (CALIBRATION) | 2 | |
| SZD-004 | CANOPY/NOSE COVER, 48-3 Jantar Standard 3, all year use | 1 | |
| T-10032 | STANDARD INSULATOR 5 PACK | 1 | |
| T-401-4-50 | STANDARD NOZZLE | 1 | |
| T-710-DIA-UPS | HAND TRUCK; STANDARD PLATFORM 1000 LB. CAPACITY | 1 | |
| T.53.03 | SHORTS REFERENCE STANDARD Shorts SD 3-30, 53 pages 3-8. Material: 2024-T3 or 2014 AluminumIncludes Test Report and Certificate of Conformance. | 1 | |
| T0WA320S20RH1TY | STANDARD TOW-BAR (A320F INCL. NEO) | 2 | |
| T2024-T6 BLOCK | BOLT HOLE STANDARD 1/8, 3/16, 5/32 | 1 | |
| T34-210 | WING COVERS (STANDARD MODELS), WINTER USE (set of 2) | 1 | |
| T34-215 | WING COVERS (STANDARD MODELS), ALL YEAR USE (set of 2) | 1 | |
| T35608 | Standard Holder | 1 | |
| T35744 | Standard Holder Stop plates | 1 | |
| T3A2 | JAWS UPPER STANDARD RADIUS | 1 | |
| T3B2 | JAWS LOWER STANDARD RADIUS | 1 | |
| T5-2002-101-00 | TENSIOMETER STANDARD GRIP | 23 | |
| T72 | RATCHET, SEALED HEAD (HIGH STRENGTH), STANDARD HANDLE, 4 7/16" | 2 | |
| T72FOD | 1/4" DRIVE DUAL 80® TECHNOLOGY STANDARD HANDLE FOREIGN OBJECT DAMAGE RATCHET | 2 | |
| TB 7150-1 | STANDARD BLOCK | 1 | |
| TB1065-4 | REFF STANDARD (V2 BLOCK) | 1 | |
| TB2-DWDMOCC-P0 | TB2-DWDMOCC-P0;T-BERD 2000 DWDM channel checker standard package | 1 | |
| TB2-OTDR-2WLA-ENC | TB2-OTDR-2WLA-ENC;T-BERD 2000 OTDR 1310/1550 Standard Pkg with Power Meter; VFL - ENCORE | 1 | |
| TB5939-4 | REFERENCE STANDARD V1 - ALUMINIO | 1 | |
| TC4 | STANDARD CONTACT TRANSDUCER | 1 | |
| TC4-255S | STANDARD CONTACT TRA | 2 | |
| TC7829 | STAHLWILLE TOOL BOX LINE AVIONICS OR EQUIVALENT STANDARD AVIONICS TOOL BOX | 1 | |
| TEK-186-2024T3-12 | 12 Hole Reference Standard Similar to Boeing 186, 3/16" to 3/4", with .030" corner and .020" corner notches on the bottom plate, .040 Long x .020 Deep Midwall Notches on the top plate. 2024-T3 | 1 | |
| TEK-5154 | CUSTOM 2 ELEMENT RING TRANSDUCER FOR BORE HOLE INSPECTION WITH BOEING REFERENCE STANDARD 55-10-13 PAGE 9 FIGURE 2. TWO MICRODOT CONNECTORS "A" AND "B" | 1 | |
| TEK-6034C | Flat Standard with Radius Notch, Cast Aluminum, per ABS PT3 32-42-05 PG15:PROC1 FIG11 | 1 | |
| TEK-6034CB | Flat Standard with Radius Notch, Copper Bronze per ABS PT3 32-42-05 PG15 PROC 1 FIG 11 | 1 | |
| TEK-6034F | Flat Standard with Radius Notch, Forged Aluminum, per ABS PT3 32-42-05 PG15:PROC1 FIG11 | 1 | |
| TEK-6034M | Flat Standard with Radius Notch, Magnesium, per ABS PT3 32-42-05 PG15:PROC1 FIG11 | 1 | |
| TEK-6220-ST | 12 Hole Standard Top Row 4.76mm, 6.35mm, 7.93m, 9.52m, 11.11mm, 12.7mm without defect, Bottom Row 4.76mm, 6.35mm, 7.93m, 9.52m, 11.11mm, 12.7mm with .5mm hole at the center, 4340 | 1 | |
| TEK-6220-TI | 12 Hole Standard Top Row 4.76mm, 6.35mm, 7.93m, 9.52m, 11.11mm, 12.7mm without defect, Bottom Row 4.76mm, 6.35mm, 7.93m, 9.52m, 11.11mm, 12.7mm .. with .5mm hole at the center, 6AL-4V | 1 | |
| TEK-6801 | Standard for Bond Master | 1 | |
| TEK-6802 | Standard for Bond Master | 1 | |
| TEK-6805 | GR/EP Laminate Standard with 3 inner ply defects, Thickness: 2.4mm, 150mm x 250mm | 1 | |
| TEK-9087L | 5 MHZ SURFACEWAVE TRANSDUCER, REFERENCE STANDARD NDT3310, LEFT SOUND DIRECTION | 1 | |
| TEK-9087R | 5 MHZ SURFACEWAVE TRANSDUCER, REFERENCE STANDARD NDT3310, RIGHT SOUND DIRECTION | 1 | |
| TEK-SF-2024T8 | MD Spotface Reference Standard 06-20-01 Pg F25, .016" 2024-T8 Clad | 1 | |
| TEK812 | REFERENCE STANDARD TECNAM | 1 | |
| TEk-5838 | Transducer for standard 787-9-HS-9 | 1 | |
| TFY72 | STANDARD HANDLE HI-LOCK FLEX HEAD | 2 | |
| TFY936 | RATCHET, HY-LOK, STANDARD HANDLE, 4 7/16IN | 3 | |
| TGUA026 | Bowers TGUA026 Universal Standard Contact Mounting Arms (Pair) | 1 | |
| THR72 | STANDARD HANDLE QUICK-RELEASE RATCHET | 1 | |
| THXB1214A- | WRENCH,BOXSTANDARD LG 10DEG OFFSET,3/8 X 7/16IN,12-PT | 1 | |
| THXB1618A | WRENCH,BOX,STANDARD LG 10DEG OFFSET 1/2 X 9/16IN,12-PT | 1 | |
| THXB2022A | WRENCH,BOX,STANDARD LG 10DEG OFFSET 5/8 X 11/16IN,12-PT | 1 | |
| THXB2426A | WRENCH,BOX,STANDARD LG 10DEG OFFSET 3/4 X 13/16IN,12-PT | 1 | |
| THXB2830A | WRENCH,BOX STANDARD LG,10DEG OFFSET 7/8 X 15/16IN,12-PT | 1 | |
| THXB3234A- | WRENCH,BOX,STANDARD LG 10DEG OFFSET 1 X 1-1/16IN,12-PT | 1 | |
| TI-6AL-4V | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 6AL-4V TITANIUM. SIZE: 1.5"W x 3.75"L x .25" | 3 | |
| TI-6AL-6V-2SN | TITANIUM STANDARD TI-6AL-6V-2SN BAMS 514-002 ...00 | 3 | |
| TL-2243 | MRI NON MAGNETIC SIEMENS 32 PIECE STANDARD TOOL KIT | 1 | |
| TL72 | LONG STANDARD HANDLE 1/4" | 4 | |
| TM10G | BREAKER BAR, STANDARD HANDLE,¼” DRIVE, LENGTH 6” | 5 | |
| TM4CSA | Driver, Standard Shank, 1/4" female square drive in handle, 6" | 1 | |
| TM830 | STANDARD RATCHET | 1 | |
| TMA2.5E | STANDARD HEX SOCKET DRIVER | 2 | |
| TMA3E | STANDARD HEX SOCKET DRIVER | 2 | |
| TMA4E | 1/4" DRIVE SAE 1/8" STANDARD HEX SOCKET DRIVER | 1 | |
| TMA5E | 1/4" DRIVE SAE 5/32" STANDARD HEX SOCKET DRIVER (SNAP-ON) | 2 | |
| TMA7E | STANDARD HEX SOCKET DRIVER | 2 | |
| TMA8E | STANDARD HEX SOCKET DRIVER 1/4 | 2 | |
| TMAB4(5E) | BALL HEX/STANDARD INCHES- 9/64'' | 1 | |
| TMAB5E | BALL HEX/STANDARD INCHES | 1 | |
| TMAM3E | 1/4" DRIVE METRIC 3 MM STANDARD HEX BIT SOCKET DRIVER | 1 | |
| TMD10 | 1/4" DRIVE STANDARD SOCKET 5/16" | 3 | |
| TMD11 | 1/4" DRIVE STANDARD SOCKET 11/32" | 4 | |
| TMD12 | 1/4" DRIVE STANDARD SOCKET 3/8" | 4 | |
| TMD14 | 1/4" DRIVE STANDARD SOCKET 7/16" | 4 | |
| TMD16 | 1/4" DRIVE STANDARD SOCKET 1/2" | 3 | |
| TMD18 | 1/4" DRIVE STANDARD SOCKET 9/16" | 4 | |
| TMD6 | 1/4" DRIVE STANDARD SOCKET 3/16" | 3 | |
| TMD7 | 1/4" DRIVE STANDARD SOCKET 7/32" | 3 | |
| TMD8 | 1/4" DRIVE STANDARD SOCKET 1/4" | 5 | |
| TMD9 | 1/4" DRIVE STANDARD SOCKET 9/32" | 3 | |
| TMP12E | 1/4" DRIVE #1 PHILLIPS STANDARD SOCKET DRIVER | 2 | |
| TMP22E | 1/4" DRIVE #2 PHILLIPS STANDARD SOCKET DRIVER | 3 | |
| TOOL BOX | STAHLWILLE TOOL BOX LINE AVIONICS OR EQUIVALENT STANDARD AVIONICS TOOL BOX | 1 | |
| TOOLA01 | STANDARD TOOL | 1 | |
| TOWA320S | STANDARD TOW-BAR (A320F INCL. NEO) | 1 | |
| TOWA320S20RH1_TY | STANDARD TOW-BAR (A320F INCL. NEO) | 2 | |
| TOWA345S | TWO BAR STANDARD SERIES | 1 | |
| TP54 | AIRBUS REFERENCE STANDARD A318-A321 51-63-07-PB1, PAGE 2 SHEET 01. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| TP54-07-1 | AIRBUS SPLIT CALIBRATION REFERENCE STANDARD A318-A321 51-63-07-991-002 PB1. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 2 | |
| TPMA12 | 12FT STANDARD TAPE MEASURE | 3 | |
| TPMA25 | 25FT STANDARD TAPE MEASURE | 1 | |
| TQS050FUA | TORQOMETER(R), Torque Driver, U.S., Standard Follow-up, 96 in. oz./6 in. lb. | 2 | |
| TQS2FUA | TORQOMETER(R), Torque Driver, U.S., Standard Follow-up, 384 in. oz./24 in. lb. | 1 | |
| TR72 | STANDARD HANDLE QUICK-RELEASE RATCHET | 4 | |
| TRDS-12 | STANDARD DELAY | 1 | |
| TRDS-25-.450 | STANDARD DELAY. POLYSTYRENE 1/4 IN. DIAMETER, 10 MICROSECOND DELAY(0.45IN LONG), FITS 0.25 IN. REPLACEABLE DELAY LINE TRANSDUCERS | 1 | |
| TS500 | TEST SET - UNDERWATER LOCATOR BEACON, LOW FREQUENCY (LF-ULB) AND STANDARD FREQUENCY ULB^T1 | 18 | |
| TSD01106 | STANDARD SINGLE ROD IMMERSION THERMOSTAT, 5-80'C, STEM LENGTH 11" - COTHERM | 1 | |
| TT-ONXDSL-TDR-TEST-SP | TT-ONXDSL-TDR-TEST-SP;Self-Paced - ONX-580 TDR Testing in Standard Mode - 22 minutes | 1 | |
| TTX10E | 1/4 DRIVE TORX T10 STANDARD BIT SOCKET | 1 | |
| TTX20E | T20 X 1/4 DRIVE TORX T20 STANDARD BIT SOCKET | 1 | |
| TTX30E | 1/4" DRIVE TORX® T30 STANDARD BIT SOCKET | 1 | |
| TY72 | STANDARD HANDLE HI-LOCK | 2 | |
| TZ72 | Ratchet Sealed Head (High Strength), Standard Handle, 4 7/16" | 1 | |
| Ti-6AL-6V-2sn | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: TI-6AL-6V-2SN TITANIUM. SIZE: 1.5"W x 3.75"L x .25" | 3 | |
| Ti-6Al-6V-2Sn | Titanium Standard Ti-6AL-6V-2SN, BAMS 514-002 ...008, .020, .040 surface notches | 3 | |
| U8330115 | Standard Phased Array Probe 10L32-9.9X7-A1-P-2.5-OM-TOP (NDT) | 1 | |
| U8330134 | Standard Phased Array Probe 5L64-64X7-NW1-P-2.5-OM (NDT) | 2 | |
| U8330689 | STANDARD PHASED ARRAY PROBE | 1 | |
| U8626006 | SURFACE PROBE, POWERLINK STANDARD BRIDGE DETACHABLE SURFACE PROBE WITH A DIAMETER OF .62 IN. (15.7 M | 1 | |
| U8700265 | STANDARD WEDGE SNW1-0L-IHC (NDT) | 2 | |
| U8720002 | STANDARD WEDGE | 1 | |
| U8720006 | STANDARD WEDGE | 1 | |
| U8720008 | WEDGE STANDARD (NDT) | 1 | |
| U8720036 | SA1-N60S Standard Wedge | 1 | |
| U8720159 | SA5-0L STANDARD WEDGE | 1 | |
| U8720163 | SA5-N45S Standard Wedge | 1 | |
| U8720169 | SA5-N60S Standard Wedge | 1 | |
| U8770054 | DLH-1 : Standard Delay. Polyst | 1 | |
| U8770069 | DLH-3 : Standard Polystyrene D | 1 | |
| U8770335 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 | |
| U8800349 | CABLE, STANDARD LEMO TO MICRODOT, 6FT RG-174 | 1 | |
| U880349 | LCM-74-6 CABLE STANDARD LEMO TO MICRODOT 6FT | 1 | |
| U8860192 | Reference standard 99A53003001104 | 1 | |
| U8860370 | Reference standard ANDT-1053 | 1 | |
| U8860407 | ALUMINUM (7075-T6) MULTI-HOLE REFERENCE STANDARD WITH CERTIFICATE TRACEABLE TO NIST | 1 | |
| U8861902 | CONDUCTIVITY STANDARD SET | 1 | |
| U8861929 | CONDUCTIVITY STANDARD CREF5-04174559100 | 1 | |
| U8880111 | CONDUCTIVITY STANDARD BLOCK | 1 | |
| UEXT0001 | Bowers UEXT0001 Ultima Standard Extension Length 100mm To Fit Heads 12-20mm | 1 | |
| UEXT0002 | Bowers UEXT0002 Ultima Standard Extension Length 150mm To Fit Heads 20-50mm | 1 | |
| UEXT0004 | Bowers UEXT0004 Ultima Standard Extension Length 150mm To Fit Heads 50mm Plus | 1 | |
| UEXT0200 | Bowers UEXT0200 Ultima Standard Extension Length 63mm To Fit Heads 6-10mm | 1 | |
| UEXT0300 | Bowers UEXT0300 Ultima Standard Extension Length 75mm To Fit Heads 10-12mm | 1 | |
| UFEDIIB-PKG-1 | UFEDIIB-PKG-1;UFEDIIb Package with Standard Accessories | 1 | |
| UK-1 | STANDARD U KIT (ULTRASONIC TESTING) | 1 | |
| UK1 | STANDARD U KIT (ULTRASONIC TESTING) | 1 | |
| USM25 | STANDARD TOOL | 1 | |
| UT-PHT-CALBLK1.A | CALIBRATION STANDARD (K1) ALUMINIUM | 1 | |
| UT-PHT-CALBLK1.CS | CALIBRATION STANDARD (K1) STEEL | 1 | |
| UT-PHT-CALBLK1.SS | CALIBRATION STANDARD (K1) STAINLESS STEEL | 1 | |
| UT-RC-5S-CASE | 5 -STEP CALIBRATION BLOCK, WOOD CASE FOR STANDARD INCH VERSION, CUSTOM INCH VERSION C2 AND METRIC A | 1 | |
| UV-LC-PRO-400B | LCNDT PRO-400B STANDARD INTENSITY, BROAD-BEAM LED UV + WHITE LIGHT LAMP, INCLUDES BATTERY, 110-220V | 1 | |
| V01214B | DOUBLE OPEN-END WRENCH WITH STANDARD HANDLE | 3 | |
| V01616B | DOUBLE OPEN-END WRENCH WITH STANDARD HANDLE | 1 | |
| V02022B | DOUBLE OPEN-END WRENCH WITH STANDARD HANDLE | 1 | |
| V02426B | DOUBLE OPEN-END WRENCH WITH STANDARD HANDLE | 2 | |
| V02830B | DOUBLE OPEN-END WRENCH WITH STANDARD HANDLE | 3 | |
| V1 | V1 STANDARD REFERENCE STANDARD IIW 1 (TYPE V1), MADE FROM ALUMINUM | 3 | |
| V1-IIW-CS | V-1 (A-2) IIW Angle Beam Calibration Block (Metric). Made to British Standard: BS-2704, German Standard: DIN 54-120, Australian Standard AS 2803 and ISO 2400. Material: A36/1018 Carbon Steel. Thickness of 1" / 25 mm, Height of 4" / 100 mm for straight bea | 1 | |
| V1041J016A00 | LAVATORY SERVICE FILL COUPLING, SIZE -16, STANDARD COLLAR V1041J016A00 GS-L600JA | 1 | |
| V15A2.CS | STANDARD BLOCK ;SPECIFICATION: V1 ;CRACK SIZE: 1 MM | 1 | |
| V2 | V2 STANDARD REFERENCE STANDARD TYPE V2), MADE FROM ALUMINUM | 2 | |
| V2 ALUMINUM STANDARD | V2 STANDARD REFERENCE STANDARD TYPE V2), MADE FROM ALUMINUM | 1 | |
| VANMAR NO 1 CAGE | VANMAR NO 1 STANDARD CAGE TOOL | 1 | |
| VANMAR NO 2 CAGE | VANMAR NO 2 STANDARD CAGE TOOL | 1 | |
| VC 010 | Boeing Reference Standard For MR-TCDL Modification (L3H). Material: 7050-T7451 or 7075-T7351 & 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| VC 011 | Boeing Reference Standard For MR-TCDL Modification (L3H). Material: 7050-T7451 or 7075-T7351 & 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| VC009 | BOEING R & D LFEC REFERENCE STANDARD Material: 7076-T6 Clad Aluminum. Fasteners HL18PB6-3, NAS620-10L, MS21042. Includes Test Report and Certificate of Conformance. | 1 | |
| VIBREX 2000 | Balancer/Analyzer w/ Standard Accessories | 4 | |
| VIBREX 2000 + | Balancer/Analyzer w/ Standard Accessories | 4 | |
| VIBREX 2000 WITH AW139 | CHADWICK BALANCER/ANALYZER W/ STANDARD ACCESSORIES - REFURBISHED* | 1 | |
| VIBREX2000 | Balancer/Analyzer w/ Standard Accessories | 4 | |
| VINTAGE 360 | REFERENCE STANDARD TITANIUM | 1 | |
| VM650CIT-3A | CALIBRATION REFERENCE STANDARD – ROTARY PRPBE KIT | 1 | |
| VO1012B | WRENCH, OPEN END, STANDARD LENGTH, 5/16"-3/8" | 4 | |
| VO1214B | WRENCH, OPEN END, STANDARD LENGTH, 3/8"-7/16" | 3 | |
| VO1416B | WRENCH, OPEN END, STANDARD LENGTH, 7/16"-1/2" | 3 | |
| VO1618B | WRENCH, OPEN END, STANDARD LENGTH, 1/2"-9/16" | 2 | |
| VO1820B | WRENCH, OPEN END, STANDARD LENGTH, 9/16"-5/8" | 1 | |
| VO2022B | WRENCH, OPEN END, STANDARD LENGTH, 5/8"-11/16" | 1 | |
| VO2224B | WRENCH, OPEN END, STANDARD LENGTH, 11/16"-3/4" | 1 | |
| VO2426B | WRENCH, OPEN END, STANDARD LENGTH, 3/4"-13/16" | 2 | |
| VO2428B | WRENCH OPEN END STANDARD 3/4"X7/8" | 1 | |
| VO2628B | WRENCH, OPEN END, STANDARD LENGTH, 13/16"-7/8" | 1 | |
| VO2830B | WRENCH, OPEN END, STANDARD LENGTH, 7/8"-15/16" | 3 | |
| VO3032B | WRENCH, OPEN END, STANDARD LENGTH, 15/16"-1" | 2 | |
| VO3234B | DOUBEL OPEN END WRENCH, STANDARD INCH, SIZE 1” X 11/16 | 2 | |
| VO3638B | OPEN WRENCH,STANDARD LENGTH,1-1/8" | 2 | |
| VO810B | WRENCH, OPEN END, STANDARD LENGTH, 1/4"-5/16" | 3 | |
| VOB20K | STANDARD OPEN END SPANNER, INCHES (SET) (1/4-5/16 TO 1-7/32-1-5/8) | 1 | |
| VOM1011B | WRENCH OPEN END STANDARD METRIC 10X11MM | 1 | |
| VOM1213B | WRENCH OPEN END STANDARD METRIC 12X13MM | 1 | |
| VOM1415B | WRENCH OPEN END STANDARD METRIC 14X15MM | 1 | |
| VOM1618B | WRENCH OPEN END STANDARD METRIC 16X18MM | 1 | |
| VOM1719B | WRENCH OPEN END STANDARD METRIC 17X19MM | 1 | |
| VOM1922B | WRENCH METRIC, OPEN END, STANDARD LENGTH, 19-22MM | 1 | |
| VOM2224B | WRENCH OPEN END STANDARD METRIC 22X24MM | 1 | |
| VOM2730B | WRENCH OPEN END STANDARD METRIC 27X30MM | 1 | |
| VOM3032B | WRENCH OPEN END STANDARD METRIC 30X32MMMM | 2 | |
| VOM67B | WRENCH OPEN END STANDARD METRIC 6X7MM | 1 | |
| VOM89B | WRENCH OPEN END STANDARD METRIC 8X9MM | 1 | |
| W-203 | PRISM STANDARD WEDGE (W-203) | 1 | |
| W-TS-100 | Bowers W-TS-100 Standard Tracer for TR200 | 1 | |
| W203 | STANDARD WEDGE | 1 | |
| W500-28-931 | NEZ STANDARD W931-CB | 1 | |
| WCI-1700NE-0801-20F | STANDARD NOSECAP ASSEMBLY | 2 | |
| WCI-1700NE-0823-20F | STANDARD NOSECAP ASSEMBLY | 2 | |
| WCI-1700NE-1001-20F | STANDARD NOSE CAP ASSEMBLY | 2 | |
| WCI-1700NE-A4243-20F | STANDARD NOSECAP ASSEMBLY | 2 | |
| WCI-A320-53-1378 Service Bulletin Kit | STANDARD TOOL | 1 | |
| WCI-A320-53-1379 Service Bulletin Kit | STANDARD TOOL | 1 | |
| WCI-CAM-A30-1-30-V2 | MANDREL - STANDARD CA TOOLING | 1 | |
| WCI-CAM-A50-1-40-V2 | MANDREL - STANDARD CA TOOLING | 1 | |
| WCI-CAM-A72-2-60-V2 | MANDREL - STANDARD CA TOOLING | 1 | |
| WCI-EKA330533226-3 | STANDARD TOOL TOOLD07 | 1 | |
| WCI-FR-26-2-N-8291 | STANDARD NOSECAP ASSEMBLY | 1 | |
| WCIA 3205313791 | STANDARD TOOL | 2 | |
| WCIA3205313781 | STANDARD TOOL | 2 | |
| WCIA3205313791 | STANDARD TOOL | 2 | |
| WCIA320531381-1 | STANDARD TOOL | 2 | |
| WK-3 | STANDARD PNEUMATIC WHEEL KIT | 1 | |
| WMH2904110 | STANDARD JAW INSERTS | 1 | |
| WNG-CB-Repair-0.622 | NDI CB Repair Reference Standard .622 diameter hole, 2" Wide x 11" Long, T=.272" Thick, T2=.500" Thick | 1 | |
| WNG-CB-Repair-0.685 | NDI CB Repair Reference Standard .685 diameter hole, 2" Wide x 11" Long, T=.320" Thick, T2=.500" Thick | 1 | |
| WNG-CB-Repair-0.747 | NDI CB Repair Reference Standard .747 diameter hole, 2" Wide x 11" Long, T=.389" Thick, T2=.500" Thick | 1 | |
| WNG-CB-Repair-0.810 | NDI CB Repair Reference Standard .810 diameter hole, 2" Wide x 11" Long, T=.500" Thick, T2=.500" Thick | 1 | |
| WNG-CB-Repair-0.870 | NDI CB Repair Reference Standard .870 diameter hole, 2" Wide x 11" Long, T=.272" Thick, T2=.500" Thick | 1 | |
| WNG-CB-Repair-0.932 | NDI CB Repair Reference Standard .932 diameter hole, 2" Wide x 11" Long, T=.563" Thick, T2=.500" Thick | 1 | |
| WNG-CB-Repair-0.997 | NDI CB Repair Reference Standard .997 diameter hole, 2" Wide x 11" Long, T=.583" Thick, T2=.500" Thick | 1 | |
| WNG-CB-Repair-1.057 | NDI CB Repair Reference Standard 1.057 diameter hole, 2" Wide x 11" Long, T=.583" Thick, T2=.500" Thick | 1 | |
| WNG-Steel-Doubler-0.625 | NDI Steel Doubler Reference Standard .625" diameter hole, 2" Wide x 11" Long, T=.500" Thick, T2=.500" Thick, 17-4PH | 1 | |
| WNG-Steel-Doubler-1.125 | NDI Steel Doubler Reference Standard 1.125" diameter hole, 2" Wide x 11" Long, T=.500" Thick, T2=.500" Thick, 17-4PH | 1 | |
| WRENCH SET, L-SHAPE, BALL HEX, STANDARD (13 PCS.) (.050" TO 3/8') | WRENCH SET, L-SHAPE, BALL HEX, STANDARD (13 PCS.) (.050" TO 3/8') | 1 | |
| WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 1/2"-9/16", 12-POINT | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 1", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 1", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 1/2", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 1/2", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 1/4", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 1/4", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 11/16", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 11/16", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 11/32", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 11/32", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 13/16", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 13/16", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 3/4", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 3/4", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 3/8", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 3/8", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 5/8", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 5/8", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 7/16", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 7/16", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 7/8", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 7/8", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 9/16", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 9/16", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 1/4", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 1/4", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 11/32", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 11/32", 12-POINT | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 5/16", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, FLANK DRIVE® PLUS, 5/16", 12-POINT | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1 /4"-5/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1 /4"-5/16", 12-POINT | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1/2"-9/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| X0605 | FRANK DRIVE OFFSET BOX (STANDARD HANDLE) | 1 | |
| XB1214A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| XB1416A | WRENCH, BOX, STANDARD LENGTH, STANDARD LENGTH, 10° OFFSET, 7/16"-1/2", 12-POINT | 1 | |
| XB1618A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| XB1820A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 9/16"-5/8", 12-POINT | 1 | |
| XB2022A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 5/8"-11/16", 12-POINT | 1 | |
| XB2224A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 11/16"-3/4", 12-POINT | 1 | |
| XB2426A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 3/4"-13/16", 12-POINT | 1 | |
| XB2830A | STANDARD DOUBLE END SPRING SPANNER | 1 | |
| XB3032A | WRENCH BOX OFFSET STANDARD 15/16"X1" | 1 | |
| XBM1011A | WRENCH BOX OFFSET STANDARD METRIC 10X11MM | 1 | |
| XBM1012A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 10-12 MM, 12 POINT | 1 | |
| XBM1214A | WRENCH BOX OFFSET STANDARD METRIC12X14MM | 1 | |
| XBM1315A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 13-15 MM, 12 POINT | 1 | |
| XBM1415A | WRENCH BOX OFFSET STANDARD METRIC 13X15MM | 1 | |
| XBM1417A | WRENCH BOX OFFSET STANDARD METRIC 14X17MM | 1 | |
| XBM1618A | WRENCH BOX OFFSET STANDARD METRIC 16X18MM | 1 | |
| XBM1719A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 17-19 MM, 12 POINT | 1 | |
| XBM1821A | WRENCH BOX OFFSET STANDARD METRIX 18X21MM | 1 | |
| XBM2224A | WRENCH BOX OFFSET STANDARD METIC 22X24MM | 1 | |
| XDES79A | 7/32–9/32" HEX, SAE SPLINE STANDARD HANDLE 15° OFFSET BOX WRENCH | 2 | |
| XDES810A | 1/4–5/16" HEX, SAE SPLINE STANDARD HANDLE 15° OFFSET BOX WRENCH | 3 | |
| XO1012 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 5/16"-3/8", 12-POINT | 1 | |
| XO1214 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| XO1618 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| XO1820 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 9/16"-5/8", 12-POINT | 1 | |
| XO2024 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 5/8"-3/4", 12-POINT | 1 | |
| XO2428 | WRENCH BOX OFFSET STANDARD 3/4"X7/8" | 1 | |
| XO810 | DOUBLE RING WRENCH, STANDARD LENGTH DEEP 60O OFFSET, 12 POINT, SIZE 1/4"X5/16” | 1 | |
| XP-2000 | STANDARD TOOL, DIGIT | 1 | |
| XP2000 | STANDARD TOOL, DIGIT | 1 | |
| XPT-HOSTED-BASE | XPT-HOSTED-BASE;Annual hosting fee for one standard instance of XPERTrak hosted products | 1 | |
| XS1214A | STANDARD OFFSET END SPRING SPANNER | 3 | |
| XS810A | WRENCH BOX OFFSET STANDARD 5/16"X1/4" | 3 | |
| Z-2639 | WELDMENT, MAIN ADAPTOR - LEARJET - COMES STANDARD ON 02-7818C0110 | 4 | |
| ZHP-200 | HI-LOK COLLAR REMOVAL PLIERS STANDARD 5/16” – 3/4” | 1 | |
| ZLGG | Lever Grease Gun Standard (Boxed) | 1 | |
| ZP-FMA-0000 | ZP-FMA-0000;Standard Housing for Fiber Adapters | 1 | |
| ZT108-3 | STANDARD RIVET SHAVER ZT706 7/16 (PFER0036/21) | 1 | |
| f 72958-8 | Spanner Wrench An Standard Type | 1 | |
| f 72959-1 | Spanner Wrench An Standard Type | 9 | |
| f 72959-10 | Spanner Wrench An Standard Type | 4 | |
| f 72959-11 | Spanner Wrench An Standard Type | 4 | |
| f 72959-12 | spanner wrench an standard type | 4 | |
| f 72959-2 | Spanner Wrench An Standard Type | 3 | |
| f 72959-3 | Spanner Wrench An Standard Type | 3 | |
| f 72959-4 | Spanner Wrench An Standard Type | 7 | |
| f 72959-5 | Spanner Wrench An Standard Type | 4 | |
| f 72959-6 | Spanner Wrench An Standard Type | 4 | |
| f 72959-7 | Spanner Wrench An Standard Type | 5 | |
| f 72959-9 | Spanner Wrench An Standard Type | 4 | |
| f72958-8 | Spanner Wrench An Standard Type | 1 | |
| f72959-1 | Spanner Wrench An Standard Type | 9 | |
| f72959-10 | Spanner Wrench An Standard Type | 4 | |
| f72959-11 | Spanner Wrench An Standard Type | 4 | |
| f72959-12 | spanner wrench an standard type | 4 | |
| f72959-2 | Spanner Wrench An Standard Type | 3 | |
| f72959-3 | Spanner Wrench An Standard Type | 3 | |
| f72959-4 | Spanner Wrench An Standard Type | 7 | |
| f72959-5 | Spanner Wrench An Standard Type | 4 | |
| f72959-6 | Spanner Wrench An Standard Type | 4 | |
| f72959-7 | Spanner Wrench An Standard Type | 5 | |
| f72959-9 | Spanner Wrench An Standard Type | 4 | |
| 11030145 | 0.1771 CARBIDE DRILL BIT-2, ( NON-STANDARD ) | 1 | |
| 2546B-01 | PUMP-VACUUM, PORTABLE, STANDARD DUTY (GDC10149) | 5 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
