| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 99A51307303000 | STANDARD, CALIBRATION | 1 | |
| 99A53107215000 | STANDARD, CALIBRATION | 5 | |
| 99A53107230000 | STANDARD, CALIBRATION | 1 | |
| 99A53107269000 | STANDARD, CALIBRATION | 1 | |
| 99A53107270000 | STANDARD, CALIBRATION | 1 | |
| 99A53107282000 | STANDARD, CALIBRATION | 1 | |
| 99A53307229000 | STANDARD, CALIBRATION | 1 | |
| 99A53307236000 | STANDARD, CALIBRATION | 4 | |
| 99A53307267000 | STANDARD, CALIBRATION | 2 | |
| 99A53307274 000 | STANDARD, CALIBRATION | 5 | |
| 99A53307274000 | STANDARD, CALIBRATION | 5 | |
| 99A53307281000 | STANDARD, CALIBRATION | 2 | |
| 99A53407254000 | STANDARD, CALIBRATION | 1 | |
| 99A53407285000 | STANDARD, CALIBRATION | 1 | |
| 99A55307306000 | STANDARD, CALIBRATION | 2 | |
| 99A57507293000 | STANDARD, CALIBRATION | 1 | |
| 99D51107295000 | STANDARD, CALIBRATION | 5 | |
| 99F53207313000 | STANDARD, CALIBRATION | 3 | |
| 99F53507256000 | STANDARD, CALIBRATION | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 99A51107299001 | STANDARD, REFERENCE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A55307306000 | STANDARD, CALIBRATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A57204436000 | STANDARD STANDARD, REFERENCE - INCLUDING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D51107295000 | STANDARD STANDARD, CALIBRATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F53303097000 | STANDARD, CALIBRATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DHC-29435-001 | CALIBRATION TEST STANDARD, DASH8 PT6 53-10-61:PG7 (CALIBRATION) | 1 | |
| (CALIB) SWREF1 | STANDARD, REFERNCE (CALIBRATION) (CALIBRATION) | 1 | |
| 1037BJ | Calibration Standard, TO 1C-130J-36 20-40-00 PG31:FIG21 | 1 | |
| 12245-004-001 | ULTRASONIC CALIBRATION STANDARD, MIDSPAR | 1 | |
| 145-44131-001 | Calibration Standard, Embraer 145, AL 7075-T6 | 6 | |
| 145-44131-003 | Calibration Standard, Embraer 135-145 E57-26-00-250-813C-1:PG4 FIG649 - 15-5PH | 3 | |
| 145-44131-005 | Calibration Standard, Embraer 135-145 E57-26-00-250-813C-1:PG4 FIG649 - 6AL4V Titanium | 3 | |
| 15-5 PH | CALIBRATION REFERENCE STANDARD, 15-5 PH STAINLESS STEEL, CONTAINING 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES, (MHIRJ OR EQUIVALENT) | 1 | |
| 2-164-551 | AIRBUS CALIBRATION STANDARD, A350-A-51-90-01-01001-040A-A-NDT & 51-63-01-991-001-A PT 6 FIG 601, 2024-T351 ALUMINUM. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. | 2 | |
| 201 | CALIBRATION STANDARD, CASA 55-15-00, CASA CN-25515000B001, PT 6, PG 4 | 8 | |
| 203026-101 | TGB BEVEL GEAR - REFERENCE STANDARD, CALIBRATION RING EWR | 1 | |
| 209PB | Calibration Standard, CASA CN-235 PT6 55-35-00:PG5 FG3 | 1 | |
| 210 | CALIBRATION STANDARD, CASA CN-25515100B000 | 2 | |
| 212-93000-0101 | Casa Calibration Standard, No.1, Page 3-3 | 1 | |
| 212-93000-0201 | Casa Calibration Standard, No.2, Page 3-5 | 1 | |
| 212-93000-0301 | Casa Calibration Standard, No.3, Page 3-7 | 1 | |
| 212-93000-0401 | Casa Calibration Standard, No.4, Page 3-9 | 1 | |
| 212-93000-0501 | Casa Calibration Standard,57-10-01 & 57-10-02, No.6 Page 3-15 | 1 | |
| 212-93000-0601 | Casa Calibration Standard,57-10-03, No.7 Page 3-17 | 1 | |
| 212-93000-0701 | Casa Calibration Standard, No.10, Page 3-29 | 1 | |
| 212-93011-0001 | Casa Calibration Standard,57-10-03, No.5 Page 3-11 to 3-14, Use BACR15BB5D8C rivet | 1 | |
| 212-93012-0001 | Casa Calibration Standard,57-10-03, No.8 Page 3-19, Use rivet in Drawer 393 | 1 | |
| 212-93013-0001 | Casa Calibration Standard, No.9, Page 3-25, Use MS20470AD4-5 rivet | 1 | |
| 212-93014-0001 | Casa Calibration Standard, No.11, Page 3-31, FE-PL-52SN = 4130 Steel, L3149-T42 = 2024-T4 | 1 | |
| 212-93015-0001 | Casa Calibration Standard, No.12, Page 3-37, Use MS20470AD4-10 rivet | 1 | |
| 220 | CALIBRATION STANDARD, CASA CN-27121120B000 | 8 | |
| 221 | CALIBRATION STANDARD, CASA CN-27120000BA00 | 3 | |
| 235302 | Calibration Standard, CASA 57-10-16, PG310, FG304a | 1 | |
| 235303 | Calibration Standard, CASA 57-10-16, PG311, FG304b | 1 | |
| 235502 | Calibration Standard, CN235 PT5 57-10-34:PG510 FIG504b | 2 | |
| 235503 | Calibration Standard, CASA CN-235 PT5 53-10-57:PG507 FG504 | 1 | |
| 235505 | Calibration Standard, CASA CN-235 PT5 57-10-05:PG509 FG504a | 1 | |
| 235507 | Calibration Standard, CASA CN-235 PT5 53-10-56:PG507 FG504 | 1 | |
| 235509 | Calibration Standard, CASA CN-235 PT5 53-20-42:PG512 FG504 | 1 | |
| 235510 | Calibration Standard, CASA CN-235 PT5 57-20-28:PG512 FG504 | 1 | |
| 235511 | Calibration Standard, CASA CN-235 PT5 53-20-32:PG514 FG505b | 1 | |
| 28-0-6049 | Fokker 70/100 Calibration Standard, Part 6 53-10-18 Page 12 Figure 8. Material: 2024-T351 Aluminum. Paint with Primer. Includes Test Report and Certificate of Conformance. | 1 | |
| 29A029 | AIRBUS CALIBRATION STANDARD, A350-A-51-90-01-01001-040A-A-NDT & 51-63-01-991-001-A PT 6 FIG 601, 2024-T351 ALUMINUM. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. | 5 | |
| 29A029YS | AIRBUS CALIBRATION STANDARD, A318/A319/A320/A321 51-63-01-991-001-A PB 1 FIG 60 & A350-A-51-90-01-01001-040A-A-NDT 1, 2024-T351 ALUMINUM. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x 0.13mm(.0051") WIDE. Includes Test Report and Certificate of Conformance. | 1 | |
| 29A049 | AIRBUS CALIBRATION STANDARD, A350-A-51-90-01-01001-040A-A-NDT & 51-63-01-991-001-A PT 6 FIG 601, 304 stainless steel.. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. | 2 | |
| 328JET-SE.4.44 | Calibration Standard, 328JET PT6 51-60-01:PG9/10 FIG605 | 1 | |
| 457A | CALIBRATION STANDARD, C130 SMP 515-C-NDI 20-40-00:FIG6 PG8 | 1 | |
| 53-10-087/1 | Calibration Standard, BAe 4100 PT6 53-10-87:PG8 FIG4 | 1 | |
| 53-10-110A/1 | Raytheon Calibration Standard, 125 Series, 53-10-110A Fig 2 | 1 | |
| 53-10-110A/2 | Raytheon Calibration Standard, 125 Series, 53-10-110A Fig 2 | 1 | |
| 57-12-501 | RIGHT AND LEFT WING REAR BEAM AT BL 35.8 — EDDY CURRENT INSPECTION CALIBRATION STANDARD, 1159W40007-1NDT (GULFSTREAM) | 1 | |
| 57-12-502 | RIGHT AND LEFT WING REAR BEAM AT RBS 103.3 — EDDY CURRENT INSPECTION PROBE :SPO 5053 PROBE :SPO 5054 CALIBRATION STANDARD, 1159W40005-1NDT (GULFSTREAM | 1 | |
| 57-12-504 | RIGHT AND LEFT WING REAR BEAM AT RBS 230.1 — EDDY CURRENT INSPECTION CALIBRATION STANDARD, 1159W40063-1NDT (GULFSTREAM | 1 | |
| 6683101-17 | ET CALIBRATION STANDARD, 560 XL SKIN AND DOUBLER | 1 | |
| 80RS01 | CALIBRATION STANDARD, | 1 | |
| 80RS02 | CALIBRATION STANDARD, | 1 | |
| 80RS03 | CALIBRATION STANDARD, | 1 | |
| 80RS04 | CALIBRATION STANDARD, | 1 | |
| 80RS05 | CALIBRATION STANDARD, | 1 | |
| 80RS07 | CALIBRATION STANDARD, | 2 | |
| 80RS08 | CALIBRATION STANDARD, | 1 | |
| 80RS10 | Calibration Standard, MD80 SID Section 2-1:FIG13 PG1 SHEET1 | 2 | |
| 80RS11 | Calibration Standard, MD80 SID Section 2-1:FIG16 PG1 SHEET1 | 1 | |
| 80RS12 | Calibration Standard, MD80 SID Section 2-1:FIG19 PG1 SHEET1 | 1 | |
| 80RS13 | Calibration Standard, MD80 SID Section 2-1:FIG20 PG1 SHEET1 | 1 | |
| 80RS15 | Calibration Standard, MD80 SID Section 2-1:FIG22 PG1-4 | 2 | |
| 80RS16 | Calibration Standard, MD80 SID Section 2-1:FIG23 PG1 SHEET1 | 1 | |
| 80RS18 | Calibration Standard, MD80 SID Section 2-1:FIG25 PG1 SHEET1 | 2 | |
| 80RS21 | Calibration Standard, MD80 SID Section 2-1:FIG29 PG1-3 | 2 | |
| 80RS23 | Calibration Standard, MD80 SID Section 2-1:FIG31 PG1 SHEET1 | 1 | |
| 80RS25 | Calibration Standard, MD80 | 1 | |
| 80RS26 | Calibration Standard, MD80 | 1 | |
| 80RS3 | Calibration Standard, MD80 SID Section 2-1:FIG3 PG1 SHEET1 | 1 | |
| 80RS4 | Calibration Standard, MD80 SID Section 2-1:FIG4 PG1 SHEET1 | 1 | |
| 80RS5 | Calibration Standard, MD80 SID Section 2-1:FIG5 PG1 SHEET1 | 1 | |
| 80RS6 | Calibration Standard, MD80 SID Section 2-1:FIG6 PG1 SHEET1 | 2 | |
| 80RS7 | Calibration Standard, MD80 SID Section 2-1:FIG7 PG1 SHEET1 | 1 | |
| 98S51605001-200 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 2024T3 | 4 | |
| 98S51605001-202 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 15-5PH | 3 | |
| 98S51605001-204 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 TA6V | 3 | |
| 98S51605001-206 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 | 3 | |
| 98S51605001-208 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 | 3 | |
| 98S51605001-224 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 2024T3 | 4 | |
| 98S51605001-226 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 15-5PH | 3 | |
| 98S51605001-228 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 TA6V | 3 | |
| 98S51605001-230 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 2024T3 | 4 | |
| 98S51605001-232 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 15-5PH | 3 | |
| 98S51605001-234 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 TA6V | 3 | |
| 98S52305005-000 | Calibration Standard, ATR42 PT4 52-31-04:PG404 FIG401 | 4 | |
| 98S52305005-002 | Calibration Standard, ATR72 PT4 52-31-04:PG411 FIG402 | 1 | |
| 98S52305008-200 | Calibration Standard, ATR42-400/500 PT6 52-31-04:PG603 FIG601 | 2 | |
| 98S523104-ATR72/42 | Calibration Standard, ATR72 PT6 52-31-04: PG603 FIG601, SB52-1057 or SB52-1058 | 1 | |
| 98S53005005 | Calibration Standard, ATR42 PT6 53-61-03:PG607 FIG601 SHT2 | 1 | |
| 98S53005005-000 | Calibration Standard, ATR42 PT6 53-31-01:PG606 FIG601 SHT1 | 3 | |
| 98S53005006-000 | Calibration Standard, ATR42 PT6 53-31-01:PG606 FIG601 SHT1 | 3 | |
| 98S53005007-000 | Calibration Standard, ATR42 PT6 53-31-04:PG606 FIG601 SHT1 | 2 | |
| 98S53005008-000 | Calibration Standard, ATR42 PT6 53-31-21:PG608 FIG601 SHT1 | 3 | |
| 98S53005009-000 | Calibration Standard, ATR42 PT6 53-51-02:PG608 FIG601 | 3 | |
| 98S53005010-000 | Calibration Standard, ATR42 PT6 53-51-03:PG606 FIG601 | 3 | |
| 98S53005011-000 | Calibration Standard, ATR42 PT6 53-61-01:PG606 FIG601 SHT1 | 3 | |
| 98S53005012 | Calibration Standard, ATR42 PT6 53-61-03:PG606 FIG601 | 1 | |
| 98S53005014-000 | Calibration Standard, ATR42 PT4 53-56-52:PG405-408 FIG402 | 3 | |
| 98S53005014-000A | Calibration Standard, ATR42 PT4 53-56-52:PG406 FIG402 SHT2 | 1 | |
| 98S53005014-000B | Calibration Standard, ATR42 PT4 53-56-52:PG407 FIG402 SHT3 | 1 | |
| 98S53005014-000C | Calibration Standard, ATR42 PT4 53-56-52:PG408 FIG402 SHT4 | 1 | |
| 98S53005014-000D | Calibration Standard, ATR42 PT4 53-56-52:PG408 FIG402 SHT4 | 1 | |
| 98S53005015-000 | Calibration Standard, ATR42 PT6 53-51-01:PG608 FIG601 | 3 | |
| 98S53005017-000 | Calibration Standard, ATR42 PT6 53-81-16:PG606 FIG601 | 3 | |
| 98S53005018-000 | Calibration Standard, ATR42 PT6 53-81-16:PG607 FIG601 | 3 | |
| 98S53005020-000 | Calibration Standard, ATR72 PT6 53-00-01:PAGE 608 FIG 601, Includes P1 thru P8 | 4 | |
| 98S53005020-200 | CALIBRATION STANDARD, ATR72 PT6 53-00-01 | 2 | |
| 98S53105000-200 | Calibration Standard, ATR42 PT6 53-11-23:PG612 FIG603 | 2 | |
| 98S53305004-000 | Calibration Standard, Bonded, ATR72 PT4 53-31-01:PG404 FIG401 | 5 | |
| 98S53305004000 | CALIBRATION STANDARD, BONDED WITH FLAT STRINGER, ATR72 PT4 53-31-01:PG404 FIG401 | 5 | |
| 98S53305005-000 | Calibration Standard, Bonded, ATR72 PT4 53-31-21:PG404 FIG401 | 5 | |
| 98S53505003-200 | Calibration Standard, ATR72 PT4 53-56-0: PG405 FIG 402 | 4 | |
| 98S53505006-000 | Calibration Standard, ATR72 PT4 53-51-23:PG408 FIG 403 | 4 | |
| 98S53805002-000 | Calibration Standard, ATR42 PT6 53-61-18:PG609 FIG603 | 6 | |
| 98S54305001-200 | Calibration Standard, ATR42 PT4 54-31-70 PG403 FIG 401 | 4 | |
| 98S54305001-202 | Calibration Standard, ATR42 PT4 54-31-70 PG409 FIG 401 | 4 | |
| 98S54305002-200 | Calibration Standard, ATR72 PT4 54-31-70 PG403 FIG 401 | 5 | |
| 98S57105003-200 | Calibration Standard, ATR42 PT4 57-15-21:PG404 FIG401 | 4 | |
| 98S57105004-200 | Calibration Standard, ATR72 PT4 57-15-21 PG403 FIG 401 | 4 | |
| 98S57105005-200 | Calibration Standard, ATR42 PT4 57-12-11:PG404 FIG401 | 4 | |
| 98S57105006-200 | Calibration Standard, ATR72 PT4 57-12-11 PG404 Figure 401 | 3 | |
| 98S57105007-200 | Calibration Standard, ATR42 PT4 57-14-03:PG403 FIG401 | 3 | |
| 98S57105009-200 | Calibration Standard, ATR42 PT4 57-15-10:PG403 FIG401 | 3 | |
| 98S57105010-200 | Calibration Standard, ATR72 57-15-10 PT4:PG404 FIG402 | 3 | |
| 98S57105011-200 | Calibration Standard, ATR42 PT4 57-15-11:PG403 FIG401 | 3 | |
| 98S57105012-200 | Calibration Standard, ATR72 PT4 57-15-11 PG403 FIG 401 | 3 | |
| 98S57105019200 | Calibration Standard, ATR42 PT6 57-14-01 PG603 FIG 601 | 3 | |
| 98S571400 | Calibration Standard, ATR42 PT6 52-14-00:PG603 FIG601 | 1 | |
| 98S57205023-000 | Calibration Standard, 57-15-06, Part 4, Page 403 Fig 401 | 1 | |
| 98S57205030001 | CALIBRATION STANDARD, ATR72, DRAWING REF: 22S57213396 | 4 | |
| 98S57205030003 | CALIBRATION STANDARD, ATR72, DRAWING REF: 22S5721 | 2 | |
| 98S57205030004 | CALIBRATION STANDARD, ATR72, DRAWING REF: 22S57213396 | 5 | |
| 999-6807-02 | US REFERENCE STANDARD, EQUIPMENT CALIBRATION PART | 1 | |
| 999-6807-03 | US REFERENCE STANDARD, EQUIPMENT CALIBRATION | 1 | |
| 99D52809004000 | AIRBUS REFERENCE STANDARD, 52-81-06, PAGE6 CALIBRATION BLOCK | 7 | |
| 99D57204193000 | AIRBUS CALIBRATION STANDARD, Material AL 7010/7050-T7651, EDM Notch 5mm (H) x 5mm (L) x 0.18mm (W) +/- 0.02mm, Paint all surfaces with primer (Material No. 16-006) . Includes Test Report and Certificate of Conformance. | 1 | |
| 9RST1 | Calibration Standard, MD80 SID Section 2-1:FIG18 PG1 SHEET1 | 1 | |
| AFNDT-2227TI-1 | 8 HOLE CALIBRATION STANDARD, HOLE SIZES; 1/8 5/3 | 1 | |
| AFNDT-2227Ti-1 | 8 Hole Calibration Standard, Hole Sizes; 1/8" 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", EDM NOTCH: .050" x .050" x .005" +0.000/-.002" BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, 737 PT 6 51-00-00 FIG 3 PROCEDURE 17, PG.8 MATERIAL(6AL-4V) TIT | 1 | |
| AFNDT-3072 | Custom designed eddy current aircraft calibration standard, Drawing 3, Sheets 1-3, for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3136-7075T6 | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030 and .020 x .020 Corner EDM Notches in each Hole. Material: 7075-T6 Aluminum | 1 | |
| AFNDT-3136/2024T3 | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030 and .020 x .020 Corner EDM Notches in each Hole. Material: 2024-T3 Aluminum | 1 | |
| AFNDT-3137AL | 14 Hole Calibration Standard, Hole Sizes; 1/8" 5/32", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4 inch diameters. ( .030 x .030 and .020 x .020 Corner EDM Notches in each Hole Per Boeing B737 PT 6 51-00-00 Prodedure 1 | 1 | |
| AFNDT-3250/2024T3 | 12 Hole Calibration Standard, Hole Sizes; 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" inch diameters. ( .030 x .030 Corner and .020 x .020 Midwall EDM Notches in each Hole. Material: 2024-T3 Aluminum | 1 | |
| AFNDT-3277 | Custom 2 Layer 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. 36 Total EDM Notches.1.) EDM Notch Specifications: .030 x .030 Corner EDM Notches in each Hole. 2.) Faying Surfa | 1 | |
| AFNDT-3296/316L | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters, .020 x .005" ± .002" Thru EDM Notches in each Hole. Material: 316L Stainless Steel. Includes Test Report and Certificate of Co | 1 | |
| AFNDT-3386/7075T6 | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters, .040 x .005 ±.002" Through EDM Notches in each Hole. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3389/15-5 | 12 Hole Calibration Standard, Hole Sizes; 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 x .020 x .005" ± .002" Corner and .020" x .005" ± .002" Thru EDM Notches in each Hole, .010, .020, .040" x .750" Long Surfac | 1 | |
| AFNDT-3389/2024T3 | 12 Hole Calibration Standard, Hole Sizes; 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 x .020 x .005" ± .002" Corner and .020" x .005" ± .002" Thru EDM Notches in each Hole, .010, .020, .040" x .750" Long Surfac | 1 | |
| AFNDT-3389/4340 | 12 Hole Calibration Standard, Hole Sizes; 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 x .020 x .005" ± .002" Corner and .020" x .005" ± .002" Thru EDM Notches in each Hole, .010, .020, .040" x .750" Long Surfac | 1 | |
| AFNDT-3389/6AL4V | 12 Hole Calibration Standard, Hole Sizes; 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 x .020 x .005" ± .002" Corner and .020" x .005" ± .002" Thru EDM Notches in each Hole, .010, .020, .040" x .750" Long Surfac | 1 | |
| AFNDT-3459AL | Calibration standard, Aluminium alloy 2024-T3, rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1. | 1 | |
| AFNDT-3459TI | Calibration standard, 6Al-4v Titanium , rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1.1/8 in | 1 | |
| AFNDT-3484AL | Eddy Current Bolt Hole Calibration standard, 5 Hole Sizes. Material: 7075-T6 Aluminium, Hole diameters: .750", .875",1.00" 1.125" 1.187", .030" x .030" x .005" ± .001" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3485AL | Eddy Current Bolt Hole Calibration standard, 3 Hole Sizes. Material: 7075-T6 Aluminium, Hole diameters: 1.250" 1.375", 1.500", .030" x .030" x .005" ± .001" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3527/2024T3 | 12 Hole Calibration Standard, 27 Total EDM Notches. Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030 and .020 x .020 ± .002" Corner EDM Notches in each Hole. 3 surface EDM Notches .008”,.020” | 1 | |
| AL29-32 | CALIBRATION REFERENCE STANDARD, BLOCK, 2024-T3 ALUMINUM ALLOY, CONDUCTIVITY BETWEEN 29% AND 32% IACS, CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP SURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ OR EQUIVALENT) | 6 | |
| BAe3100/53-10-15/14-18SWG | Calibration Standard, BAe 3100 PT6 53-10-15:PG408 FIG2, 14SWG TOP/18SWG BOTTOM | 1 | |
| BAe3100/53-10-15/17-18SWG | Calibration Standard, BAe 3100 PT6 53-10-15:PG408 FIG2, 17SWG TOP/18SWG BOTTOM | 1 | |
| BAe3100/53-10-15/19-18SWG | Calibration Standard, BAe 3100 PT6 53-10-15:PG408 FIG2, 19SWG TOP/18SWG BOTTOM | 1 | |
| BH7475-T7351 | CALIBRATION STANDARD, BOMBARDIER CHALLENGER 604, 53-21-00 FIG 602. MATERIAL: 7475-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 4 | |
| C02683A | PAUT ULTRASONIC CALIBRATION STANDARD, HY-100, NICKELPLATED 3.250'' TALL X 1.250" WIDE X 15.50" LONG UT SCANNING SURFACE PHONOGRAPHIC FINISH TO 125 RA | 1 | |
| C02699A | PAUT ULTRASONIC CALIBRATION STANDARD, HY-100, NICKELPLATED 6.250'' TALL X 1.250" WIDE X 24.00" LONG UT SCANNING SURFACE PHONOGRAPHIC FINISH TO 125 RA | 1 | |
| CE1617528 | CALIBRATION STANDARD, BOMBARDIER TEST REFERENCE ULTRA SONIC NDI. MATERIAL: 7475-T7351 and 7040-T7451 ALUMINUM. MS90254U0805D FASTENERS. Includes Test Report and Certificate of Conformance. | 1 | |
| CE1617529 | CALIBRATION STANDARD, BOMBARDIER TEST REFERENCE ULTRA SONIC NDI. MATERIAL: 7475-T7351 and 7040-T7451 ALUMINUM. MS90254U0805D FASTENERS. Includes Test Report and Certificate of Conformance. | 1 | |
| DHC 29116-001 | CALIBRATION TEST STANDARD, DASH8 PT6 53-30-01:PG7 FIG3 | 3 | |
| DHC 29116-007 | CALIBRATION TEST STANDARD, DASH8 PT6 53-30-01:PG7 FIG3 | 3 | |
| DHC 29117-001 | CALIBRATION TEST STANDARD, DASH8 PT6 53-10-21:PG5 FIG3 | 3 | |
| DHC 29435-001 | CALIBRATION TEST STANDARD, DASH8 PT6 53-10-61:PG7 FIG3 | 2 | |
| DHC-29116-001 | Calibration Test Standard, DASH8 PT6 53-30-01:PG7 FIG3 | 3 | |
| DHC-29116-007 | Calibration Test Standard, DASH8 PT6 53-30-01:PG7 FIG3 | 3 | |
| DHC-29117-001 | Calibration Test Standard, DASH8 PT6 53-10-21:PG5 FIG3 | 3 | |
| DHC-29434-001 | Calibration Test Standard, DASH8 PT6 53-10-41:PG7 FIG2 | 1 | |
| DHC-29434-101 | Calibration Test Standard, DASH8 PT6 53-10-41:PG8 FIG2 | 3 | |
| DHC-29435-001 | Calibration Test Standard, DASH8 PT6 53-10-61:PG7 FIG3 | 2 | |
| DHC-29436-001 | Calibration Test Standard, DASH8 PT6 51-00-03:PG7 FIG3 | 1 | |
| DHC-29437-001 | Calibration Test Standard, DASH8 PT6 51-00-03:PG7 FIG4 | 1 | |
| DHC29117-001 | CALIBRATION TEST STANDARD, DASH8 PT6 53-10-21:PG5 FIG3 | 3 | |
| DHC29434-101 | CALIBRATION TEST STANDARD, DASH8 PT6 53-10-41:PG8 FIG2 | 3 | |
| DHC29435-001 | CALIBRATION TEST STANDARD, DASH8 PT6 53-10-61:PG7 FIG3 | 2 | |
| EO8199-4F | CALIBRATION TEST STANDARD, DASH8 | 1 | |
| EXBC670-59141 | CALIBRATION REFERENCE STANDARD, MULTI LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ) | 1 | |
| EXBC670-59143-001 | CALIBRATION REFERENCE STANDARD, ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES. (MHIRJ) | 1 | |
| EXBC670-59145 | CALIBRATION REFERENCE STANDARD, ALUMINUM ALLOY, MULTIPLE LAYERS FASTENED ASSEMBLY, CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ) | 1 | |
| EXBC670-59157-003 | CALIBRATION REFERENCE STANDARD, MULTIPLE LAYERED FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXBC670-59162 | CALIBRATION REFERENCE STANDARD, ALUMINUM ALLOY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCH. (MHIRJ OR EQUIVALENT) | 1 | |
| EXBC670-59164 | CALIBRATION REFERENCE STANDARD, MULTIPLE LAYERS ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EXBC670-59174 | CALIBRATION REFERENCE STANDARD, ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ) | 1 | |
| EXBC670-59178 | CALIBRATION REFERENCE STANDARD, MULTIPLE LAYER FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXBD400-50013-003 | Calibration Standard, 2024-T3 Clad, NAS1097AD4 Rivets, Paint.. | 1 | |
| EXSH670-31001-1 | CALIBRATION REFERENCE STANDARD, STGR15R BUTT JOINT, CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ) | 1 | |
| EXSH670-31002-1 | CALIBRATION REFERENCE STANDARD, STGR1L AND STGR20L BUTT JOINTS, CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ) | 1 | |
| EXSH670-35910-1 | CALIBRATION REFERENCE STANDARD, ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES | 1 | |
| EXSH690-31022 | CALIBRATION REFERENCE STANDARD, POTABLE WATER. | 1 | |
| EXSH690-31023-1 | CALIBRATION REFERENCE STANDARD, CIRCUMFERENTIAL SKIN JOINT STGR7 TEST PIECE, CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| GSE 206 | Calibration Standard, Embraer 190 PART 1 51-00-00 PG 4, 7050-T7 *same as 145-44131-001* | 1 | |
| GSE 449 | Calibration Standard, Embraer 190 PART 1 51-00-00 PG 5, 15-5PH *same as 145-44131-003* | 1 | |
| GSE 450 | Calibration Standard, Embraer 190 PART 1 51-00-00 PG 6, 6AL-4V *same as 145-44131-005* | 1 | |
| L1011-NDI-0100-57-030 | Calibration Standard, L1011 PT4 57-32-80:PG3 FIG2 | 1 | |
| NDT187 | Calibration Standard, CASA CN-25130040E001, 51-30-04 PT 1, PG 11 | 1 | |
| NDT188 | Calibration Standard, CASA CN-25130040F001, 51-30-04, PT 1, PG 12 | 1 | |
| NDT190 | Calibration Standard, CASA CN-25130050E001, 51-30-05, PT 1 PG 11 | 1 | |
| NDT191 | Calibration Standard, CASA CN-25130050F001, 51-30-05, PT 1 PG 12 | 1 | |
| NDT201 | Calibration Standard, CASA 55-15-00, CASA CN-25515000B001, PT 6, PG 4 | 1 | |
| NDT202 | Calibration Standard, CASA CN-25233150B001 | 1 | |
| NDT203 | Calibration Standard, CASA CN- 25515200B000 | 1 | |
| NDT204 | Calibration Standard, CASA CN-25337450B000, 53-37-45, PT 3, PG 5 | 1 | |
| NDT205 | Calibration Standard, CASA CN-25327150B001, 53-27-15, PT 3, PG 4 | 1 | |
| NDT207 | Calibration Standard, CASA CN-25753100B000, 57-53-10, PT 4, PG 5 | 1 | |
| NDT209 | Calibration Standard, CASA CN-25535000B001, 55-35-00, PT 6, PG 4 | 1 | |
| NDT210 | Calibration Standard, CASA CN-25515100B000 | 1 | |
| NDT211 | Calibration Standard, CASA CN-25327110B000, 53-27-11 PT 3, PG 4 | 1 | |
| NDT214 | Calibration Standard, CASA CN-25711040B000, 57-11-01, PT 4, PG 4 | 1 | |
| NDT215 | Calibration Standard, CASA CN-25315000B000, 53-15-00, PT 2, PG 4 | 1 | |
| NDT216 | Calibration Standard, CASA CN-25316000B000, 53-16-00 PT 2, PG 4 | 1 | |
| NDT217 | Calibration Standard, CASA CN-25337000B000, 53-37-00, PT 3, PG 4 | 1 | |
| NDT218 | Calibration Standard, CASA 57-24-00, PT 4, PG 4 | 1 | |
| NDT219 | Calibration Standard, CASA CN-235 PT4 57-11-06:PG4 FG2 | 1 | |
| NDT220 | Calibration Standard, CASA CN-27121120B000 | 1 | |
| NDT221 | Calibration Standard, CASA CN-27120000BA00 | 1 | |
| NDT602-.050 | Calibration Standard, 0.050INCH | 1 | |
| NDT602-.074 | Calibration Standard, .074INCH | 1 | |
| NDT602-.100 | Calibration Standard, 0.100 | 1 | |
| NDT602-.125 | Calibration Standard, 0.125 | 1 | |
| NDT602-.130 | Calibration Standard, 0.130 | 1 | |
| NDT602-.150 | Calibration Standard, 0.150INCH | 1 | |
| NDT602-.180 | Calibration Standard, 0.180INCH | 1 | |
| NDT602-.225 | Calibration Standard, 0.225INCH | 1 | |
| PDL 1030J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG17 PG24 | 2 | |
| PDL 1034 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26, engrave per drawing Standard | 1 | |
| PDL 1034/1040 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26, engrave per drawing Standard + Guide | 1 | |
| PDL 1034J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26, engrave per drawing Standard | 1 | |
| PDL 1034J/1040J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26 & PG27, engrave per drawing, Standard + Guide | 2 | |
| PDL 1037A | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG20 PG30 | 2 | |
| PDL 1037A/B | Calibration Standard, TO 1C-130J-36 20-40-00 PG31:FIG20, 2 Saw cuts | 1 | |
| PDL 1037AJ | Calibration Standard, TO 1C-130J-36 20-40-00 PG30:FIG20 | 1 | |
| PDL 1037B | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG21 PG31 | 2 | |
| PDL 1037BJ | Calibration Standard, TO 1C-130J-36 20-40-00 PG31:FIG21 | 1 | |
| PDL 1040 | Calibration Standard, C130 20-40-00 Fig 18 GP26 Probe Guide | 1 | |
| PDL 1040J | Calibration Standard, C130 20-40-00 Fig 18 GP26 Probe Guide | 1 | |
| PDL 1081 | Calibration Standard, Foward Fuselage Skin/Doulber, Fg 6-22 Pg 6-97 | 1 | |
| PDL 1155 | Calibration Standard, Calibration Standard, C130 SMP 515-C-NDI 20-40-00 | 2 | |
| PDL 1199 | Calibration Standard, L1011 PT4 093-32-238:PG17 FIG2 | 1 | |
| PDL 1214J | Calibration Standard, C13J SMP 515-C-NDI 20-40-00:FIG22 PG32 | 2 | |
| PDL 1215J | Calibration Standard, C130J SMP 515-C-NDI 20-40-00:FIG23 PG33 | 2 | |
| PDL 1217AJ | Calibration Standard, C130J SMP 515-C-NDI 20-40-00:FIG24 PG34 | 1 | |
| PDL 1217BJ | Calibration Standard, C130J SMP 515-C-NDI 20-40-00:FIG25 PG35 | 1 | |
| PDL 1217CJ | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG25 PG35 | 1 | |
| PDL 1252 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 | 1 | |
| PDL 1253 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 | 1 | |
| PDL 389J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG1 PG3 | 2 | |
| PDL 419J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG2 PG4 | 1 | |
| PDL 422J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG3 PG5 | 1 | |
| PDL 447 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG4 PG6 | 1 | |
| PDL 447J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG4 PG6 | 2 | |
| PDL 449J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG5 PG7 | 1 | |
| PDL 457A | CALIBRATION STANDARD, C130 SMP 515-C-NDI 20-40-00:FIG6 PG8 | 1 | |
| PDL 457AJ | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG6 PG8 | 2 | |
| PDL 457S | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG6 PG8 | 1 | |
| PDL 457SJ | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG6 PG8 | 2 | |
| PDL 457SS | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG6 PG8 | 2 | |
| PDL 459J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG7 PG10 | 1 | |
| PDL 522J | Calibration Standard, C130 SMP, 522 | 1 | |
| PDL 601 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 Probe Guide Set PDL 601-101 thru 109 | 1 | |
| PDL 624 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 Probe Guide Set PDL 624-101 thru 109 | 1 | |
| PDL 843 | CALIBRATION STANDARD, LOCKHEED-GEORGIA CO. | 1 | |
| PDL 843J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG9 PG12 | 2 | |
| PDL 917 | Calibration Standard, C130 SMP 515-C-NDI FIG2 | 2 | |
| PDL 919J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG11 PG14 | 1 | |
| PDL 920J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG12 PG16 | 1 | |
| PDL 941J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG13 PG19 | 1 | |
| PDL 943 | CALIBRATION STANDARD, LASC | 1 | |
| PDL 943J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG14 PG20 | 2 | |
| PDL 944-2 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG15 PG21 | 1 | |
| PDL 944-2J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG15 PG21 | 2 | |
| PDL 958J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG16 PG23 | 1 | |
| PDL 980 | CALIBRATION STANDARD, L-382/C130 NDI LEFT AND RIGHT HORIZONTAL QEC LONGERONS | 1 | |
| PDL1034 | CALIBRATION STANDARD, C130 SMP 515-C-NDI 20-40-00: | 1 | |
| PDL1252 | CALIBRATION STANDARD, C130 SMP 515-C-NDI 20-40-00 | 1 | |
| PDL419 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL422 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL447 | CALIBRATION STANDARD, C130 SMP 515-C-NDI 20-40-00:FIG4 PG6 | 1 | |
| PDL457A | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL459 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL525 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL621 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL843 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PSP 396 | BOMBARDIER CALIBRATION STANDARD, CL-215T PART 6 FIGURE 5 PAGE 8. A TOTAL OF 15 HOLE SIZES: 4mm THRU 18mm MATERIAL: 2024T3 ALUMINUM. Includes Certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| RH123-C30-2024T3 | 12 hole calibration standard, .030 Corner notches, 3/16" (.187) to 25/64" (.390), 2024T3 Aluminum | 1 | |
| RH20-T20-7075T6 | 20 Hole Calibration Standard, Thru Notches 7075T6 | 1 | |
| RH240-C30M20T20-7075T6 | 24 hole calibration standard, 3/4" - 1 1/2" holes. 030" corner notches, .020 midwall notch, .020" thru-wall, 3 plate stack, 7075T6 | 1 | |
| RH290-C3-304 | 29 hole calibration standard, 1/8" to 1.0", .030" corner notches, per Boeing PT6 51-00-00 FIG16, Stainless Steel | 1 | |
| RH290-C3-T6AL4V | 29 hole calibration standard, 1/8" to 1.0", .030" corner notches, per Boeing PT6 51-00-00 FIG16, Titanium | 1 | |
| RH290-C30-2024T3 | 29 hole calibration standard, 1/8" to 1.0", .030" corner notches, per Boeing PT6 51-00-00 FIG16 | 1 | |
| RH290-C3C2-2024T3 | 29 hole calibration standard, 1/8" to 1.0", .030" & .020" corner notches, per Boeing PT6 51-00-00 FIG16 | 1 | |
| RH290-C50-T6AL4V | 29 hole calibration standard, 1/8" to 1.0", .050" corner notches, per Boeing PT6 51-00-00 FIG16, Titanium | 1 | |
| RH290-M30-7075T6 | 29 hole calibration standard, 1/8" to 1.0", .030" deep midwall notches .100 long | 1 | |
| RH80-C30-2024T3 | 8 hole calibration standard, 1/8" thru 1/2", .030" corner notches, 2024-T3 | 1 | |
| RH80-C30-7075T6 | 8 hole calibration standard, 1/8" thru 1/2", .030" corner notches, 7075-T6 | 1 | |
| RH80-C30M20-304L | 8 hole calibration standard, 1/8" thru 1/2", .030" corner notches, .020 midwall notch, 304L | 1 | |
| RH80-C30M20-7075T6 | 8 hole calibration standard, 1/8" thru 1/2", .030" corner notches, .020 midwall notch, 7075T6 | 1 | |
| RH80-C30M20-T6AL4V | 8 hole calibration standard, 1/8" thru 1/2", .030" corner notches, .020 midwall notch, T6AL4V Titanium | 1 | |
| RH80-M30-7075T6 | 8 hole calibration standard, .030 midwall notch, 7075T6 | 1 | |
| RH80-M30-T6AL4V | 8 hole calibration standard, 1/8" thru 1/2", .030 midwall notch x .100 Long, T6AL4V Titanium | 1 | |
| RH80-T20-2024T3 | 8 hole calibration standard, 1/8" thru 1/2", .020" Thru notches, 2024-T3 | 1 | |
| RH80-T20-7075T6 | 8 Hole Calibration Standard, 1/8" Thru 1/2", .020" Thru notches, 7075T6 | 1 | |
| RH80-T20-T6AL4V | 8 hole calibration standard, 1/8" thru 1/2", .020" Thru notches, T6AL4V | 1 | |
| RH81-C30-7075T6 | 8 hole calibration standard, .625" thru 1.5", increments of .125", .030" corner notches, 7075-T6 | 1 | |
| RH81-C30T20-155 | 8 hole calibration standard, .156" thru .562", .030" corner notches, .020 thru notch, 155SS | 1 | |
| RH81-C30T20-4130 | 8 hole calibration standard, .156" thru .562", .030" corner notches, .020 thru notch, 4130 | 1 | |
| RH84-M30-7075T6 | 8 hole calibration standard, .030 midwall notch, 7075T6, 4.8mm, 6.35mm, 7.9mm, 9.5mm, 11.1mm, 12.7mm, 13.5mm, 14.29mm | 1 | |
| RH85-M30-7075T6 | 8 hole calibration standard, .030 midwall notch, 7075T6, 5mm, 6mm, 7mm, 8.15mm, 9.42mm, 11mm, 12.6mm, 14mm | 1 | |
| RH86-M30-7075T6-MM | 8 hole calibration standard, .030 midwall notch, 7075T6, Hole Sizes; 3.5mm, 5mm, 6mm, 7mm, 8mm, 10mm, 11mm, 15mm, Dimensions of Std. 3" x 6" | 1 | |
| RH87-C30T20-7075T6 | 8 hole calibration standard, .030 corner notch, .020 thru notch, 7075T6, Hole Sizes; .312 - .750, 1/16" increments | 1 | |
| RM110-C30M20-T6AL4V-1 | 11 hole calibration standard, .125, .187, .25, .312, .375, .437, .50, .562, .625, .687, .75 , T6AL4V, .030 Corner, .020 Midwall and .040, .020, .008 surface notches | 1 | |
| RM120-C20-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" corner, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM120-C30-2024T3 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 2024-T3 | 1 | |
| RM120-C30-2024T3-1 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 010", .020", .040" surface notches 2024-T3 | 1 | |
| RM120-C30-304 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 304 Stainless | 1 | |
| RM120-C30-4340 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 4340 Steel | 1 | |
| RM120-C30-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM120-C30-T6AL4V | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 6AL4V | 1 | |
| RM120-C30C20-2024T3 | 12 hole calibration standard, .030" corner notches, 3/16" to 3/4", 2024T3 Aluminum“2 corner notches 180 deg apart. 0.030’” upper surface and 0.020” on lower surface | 1 | |
| RM120-C30C20-T6AL4V | 12 hole calibration standard, .030" corner notches, 3/16" to 3/4", T6AL4V TI 2 corner notches 180 deg apart. 0.030’” upper surface and 0.020” on lower surface | 1 | |
| RM120-C30M20-2024T3 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" Midwall & .030" corner, 008", .020", .040" surface notches 2024T3 | 1 | |
| RM120-C30M20-4340 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" midwall & .030" corner, 008", .020", .040" surface notches 4340 | 1 | |
| RM120-C30M20-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" midwall & .030" corner, 008", .020", .040" surface notches 4340 | 1 | |
| RM120-C30T20-2024T3 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 2024T3 | 1 | |
| RM120-C30T20-2024T3-1 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 010", .020", .040" surface notches 2024T3 | 1 | |
| RM120-C30T20-2024T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 2024T6 | 1 | |
| RM120-C30T20-304 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 304 SS | 1 | |
| RM120-C30T20-304L | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 304L | 1 | |
| RM120-C30T20-4130 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 4130 | 1 | |
| RM120-C30T20-4340 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 4340 | 1 | |
| RM120-C30T20-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM120-C30T20-MAG | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches Magnesium | 1 | |
| RM120-C30T20-T6AL4V | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 6AL4V | 1 | |
| RM120-C30T30-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" thru notches & .030" corner, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM120-C40T20-2024T3 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .040" corner, 008", .020", .040" surface notches 2024T3 | 1 | |
| RM120-C40T20-T6AL4V | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .040" corner, 008", .020", .040" surface notches 6AL4V | 1 | |
| RM120-T20-4130 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches, 008", .020", .040" surface notches 4130 | 1 | |
| RM120-T20-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" Thru, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM120-T20-I625 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches, 008", .020", .040" surface notches Inconel 625 | 1 | |
| RM120-T20-T6AL4V | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches, 008", .020", .040" surface notches 6AL-4V | 1 | |
| RM120-T40-T6AL4V | 12 hole calibration standard, 3/16" to 3/4" holes, .040" thru notches, 008", .020", .040" surface notches 6AL-4V | 1 | |
| RM121-C30-4130 | 12 hole calibration standard, .030" corner & .010", .020", .040" surface notches, 1/8" to 3/4", .125”,.156”, .187 ", .250”, .312”, .375”, .437”, .500”, .562”, .625”, .687”, .750”, 4130 Steel | 1 | |
| RM121-C30-7075T6 | 12 hole calibration standard, 1/8" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM121-C30-T6AL4V | 12 hole calibration standard, 1/8" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 6AL4V | 1 | |
| RM122-C30-2024T3 | 12 hole calibration standard, .030" corner notches, 1/8" to 13/16", 008", .020", .040" surface notches, 2024T3 Alum | 1 | |
| RM122-C30-4130 | 12 hole calibration standard, .030" corner notches, 1/8" to 13/16", 008", .020", .040" surface notches, 4130 Steel | 1 | |
| RM122-C30-7075T6 | 12 hole calibration standard, .030" corner notches, 1/8" to 13/16", 008", .020", .040" surface notches, 7075-T6 | 1 | |
| RM123-C30-2024T3 | 12 hole calibration standard, .030 Corner notches, 3/16" (.187) to 25/64" (.390), 008", .020", .040" surface notches, 2024T3 Aluminum | 1 | |
| RM130-C30M20-T6AL4V | 13 hole Titanium calibration standard, .030" corner, .020 midwall notches ,5/32" to 3/4" holes .005, .010 and .040 surface notches *similar to 23-55* | 1 | |
| RM200-C30-304L | 20 Hole Calibration Standard, 1/8"-3/4"Ø, .030 Corner, 304L SS, with .008, .020, .040 Surface Notches | 1 | |
| RM200-T40-T6AL4V | 20 Hole Calibration Standard, 1/8"-3/4"Ø, .040 Thru Wall, T6AL4V Titanium, with .008, .020, .040 Surface Notches | 1 | |
| RM6-C40T20-2024T3 | 6 hole calibration standard,( 0.75",1.0", 1.250" , 1.5" , 1.750" , 2.0"..holes, .020" thru notches & .040" corner,..008", .020", .040" surface notches 2024T3 | 1 | |
| RM6-C40T20-T6AL4V | 6 hole calibration standard,( 0.75",1.0", 1.250" , 1.5" , 1.750" , 2.0"..holes, .020" thru notches & .040" corner,..008", .020", .040" surface notches T6AL4V | 1 | |
| SK601R-30009-1 | CALIBRATION STANDARD, CANADAIR JET CRJ200 PT4 53-61-153: FIG 1 PG 6, 2 LAYERS OF .063 2024-T3 WITH 1 | 5 | |
| SN10550000-7001 | Calibration Standard, DAC 60-13AI (REV 6-86):DWG No. SN10550000 | 1 | |
| ST4130 | CALIBRATION REFERENCE STANDARD, CARBON STEEL 4130 ALLOY, CONTAINING 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ OR COMMERCIALLY AVAILABLE). | 1 | |
| ST4340 | STANDARD, CALIBRATION, NON DEST. TESTING | 5 | |
| ST4340 | STANDARD, CALIBRATION, NON DEST | 5 | |
| THICKNESS MEASUREMENT-2024-T3 | Calibration Standard, Embraer 170 PART 1 51-00-00 PG 7,2024-T3 | 1 | |
| THICKNESS MEASUREMENT-6013-T4 | Calibration Standard, Embraer 170 PART 1 51-00-00 PG 7,6013-T4 | 1 | |
| THICKNESS MEASUREMENT-7050-T7 | Calibration Standard, Embraer 170 PART 1 51-00-00 PG 7, 7050-T7 | 1 | |
| TI-6AL-6V-2SN | CALIBRATION REFERENCE STANDARD, NO.TI-6AL-6V-2SN, MADE FROM TITANIUM ALLOY (1.1% IACS), CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED NOTCHES, (BOMBARDIER INC. OR EQUIVALENT) | 3 | |
| VM89A | 12 HOLE CALIBRATION STANDARD, 3/16" TO 3/4" HOLES, .030" CORNER, 010", .020", .040" SURFACE NOTCHES | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
