| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| C27065-17 | STAND OFF | 1 | |
| PWC43600-10 | STAND OFF | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 04-S3 | Malco® Hand Seamers (Jaw width: 3-1/4" W x 1-1/4" D) (Overall length: 8-3/4" (222 mm)) (Type: Standard) (Add to cart: Add To Cart) (Jaw width: 3-1/4" W x 1-1/4" D) (Overall length: 8-1/2" (216 mm)) (Type: Offset) (Add to cart: Add To Cart) | 1 | |
| 04-S6 | Malco® Hand Seamers (Jaw width: 3-1/4" W x 1-1/4" D) (Overall length: 8-3/4" (222 mm)) (Type: Standard) (Add to cart: Add To Cart) (Jaw width: 3-1/4" W x 1-1/4" D) (Overall length: 8-1/2" (216 mm)) (Type: Offset) (Add to cart: Add To Cart) (Jaw width: 6" | 1 | |
| 1250-R-SS-1.0-12 | THREADED STAND-OFF | 1 | |
| 53-205 | OFFSET RIVET GUN SET 5PC MIX UNIV. STANDARD 'L" 3-1/2" .401 | 2 | |
| 56274-01 | STAND OFF - 56274-01 | 1 | |
| 70746-1 | STANDOFF | 1 | |
| 8549110 | SUPPORT STAND (FOUR OFF) | 1 | |
| 956A1602P01 | KIT, PRESERVATION - ENGINE LEAP OFF-STAND | 5 | |
| 994-0004 | ADJUSTABLE BARREL STANDOFF | 1 | |
| 99GP-06-OLAD | OFFSET NOSE ASSY HUCK POWER RIVETERS (STANDARD EXTENDED) | 1 | |
| 99GP-06-ORAD | OFFSET NOSE ASSY HUCK POWER RIVETERS (STANDARD) | 1 | |
| ACS87009 | Support Stand − Fan Cowls (4− off) | 2 | |
| BOERF708A | Set, Wrench, Flex Head Ratcheting Box / Open End, Standard, 12° Offset, (8 pcs.) | 2 | |
| C27083-7 | STANDOFF | 1 | |
| C32004-43 | STANDOFF ASSY | 1 | |
| CB609B3 | STANDOFF ADAPTOR TOOL | 1 | |
| CFM-110 | QEC OFF-LINK ENGINE SHIPPER/TRANSPORT, LONG-TERM STORAGE COVER "BAG" or "ENVELOPE", CFM-56-5A/5B w/ Exhaust Cone, Fully enclosed under belly, Stanley Stand P/N: 150502-2 | 1 | |
| DLT.187-P | Persplex(Lucite) Delay Tip(Standoff) for MRD-1501-HR Transducer. | 1 | |
| F80049-12 | HYDRAULIC STANDBY SYS. PRESS./SHUTOFF VALVE 2ea | 9 | |
| F80049-2 | HYDRAULIC STANDBY SYS. PRESS./SHUTOFF VALVE | 6 | |
| F80049-56 | HYDRAULIC STANDBY SYS. PRESS./SHUTOFF VALVE 2EA | 17 | |
| GE-105 | QEC OFF-LINK SHIPPING/TRANSPORT ENGINE COVER, GE90-115 Propulsor, fully enclosed (Boeing 777). AGSE Stand P/N: 9C6019P0Z | 1 | |
| GXO810NP | STANDARD HANDLE 60 DEGREE OFFSET HEAD. SIZE: 1/4" X 5/16" | 1 | |
| H150E-1000-101 | STANDOFF | 1 | |
| J061202 | STAND OFF ROD | 1 | |
| J25016-1 | TEST STAND - LATCH ACTUATOR, OFF-WING ESCAPE SLIDE COMPARTMENT DOOR | 3 | |
| J53001-5 | Stand-Off Assembly | 3 | |
| J53001-6 | Stand-Off Assembly | 3 | |
| J53001-7 | Stand-Off Assembly | 2 | |
| J71038-20 | Standoff block | 1 | |
| K51004-1 | BOND TEST EQUIPMENT - STANDOFFS, PRESSURE DECK HEAT SHIELDS | 1 | |
| MPS43B-A0-B9-F3-K0 | Standard MPS43B Price Offering, Incl Wi-Fi | 1 | |
| PW-120 | PW JT9D Series QEC OFF-LINK ENGINE SHIPPER/TRANSPORT, LONG-TERM STORAGE COVER "BAG" or "ENVELOPE", Fully Enclosed, JT9D-7R4 model, STANG Engine Stand | 1 | |
| PWA52843-3 | STANDOFF | 1 | |
| QRS10001301 | STANDOFF NUT | 1 | |
| R1011C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 5/16"-11/32", 12-POINT | 3 | |
| R1012C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 5/16"-3/8", 12-POINT | 1 | |
| R1214C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | 4 | |
| R1618C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1/2"-9/16", 12-POINT | 5 | |
| R810C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1 /4"-5/16", 12-POINT | 4 | |
| RBZ1214 | STANDARD O” OFFSET RATCHETING BOX WRENCH, 12 POINT 3/8-7/16” | 3 | |
| RRT115165 | PROBE STANDOFF | 1 | |
| RYA1011 | WRENCH, RATCHETING BOX, 25° OFFSET, STANDARD LENGTH, 5/16IN-11/32IN, 12-POINT | 3 | |
| RYA1214 | WRENCH, RATCHETING BOX, 25° OFFSET, STANDARD LENGTH, 3/8IN-7/16IN, 12-POINT | 4 | |
| RYA810 | WRENCH,RATCHETING BOX,25 OFFSET.STANDARD LENGHT,1/4"-5/16",12- POINT | 3 | |
| S/343502 | STANDOFF,MULTIPLE TRANSDUCER | 1 | |
| S92-142 | PITOT COVERS (Covers Stand-Off) (set of 3) | 1 | |
| S92-143 | PITOT COVERS, heat resistant type (Covers Stand-Off) (set of 3) | 1 | |
| ST2580-469-2-12-20 | Standard tool-wrench offset box end | 1 | |
| ST2580-469-2-12-20-B | Standard Tool - Wrench Offset Box End | 2 | |
| ST2580-469-2-24-40B | Standard tool-wrench offset box end | 1 | |
| ST895A-2 | STAND-OFF ELECTRICAL | 1 | |
| STD400WHT | STAND-OFF LED ELECTR | 1 | |
| TEK-1504-5/4L | LENGTH, (TECHNA NDT OR EQUIVALENT) SLIDING PROBE WITH ADJUSTABLE STAND-OFF FOR PROTRUDING FASTENER, 100 HZ TO 20 KHZ FREQUENCY, REFLECTION, 0.594 IN. (15.09 MM) WIDTH, 1.469 IN. (37.31 MM) LENGTH, 1.125 IN. (25.58 MM) HEIGHT. (TECHNA NDT OR EQUIVALENT) | 1 | |
| THXB1214A- | WRENCH,BOXSTANDARD LG 10DEG OFFSET,3/8 X 7/16IN,12-PT | 1 | |
| THXB1618A | WRENCH,BOX,STANDARD LG 10DEG OFFSET 1/2 X 9/16IN,12-PT | 1 | |
| THXB2022A | WRENCH,BOX,STANDARD LG 10DEG OFFSET 5/8 X 11/16IN,12-PT | 1 | |
| THXB2426A | WRENCH,BOX,STANDARD LG 10DEG OFFSET 3/4 X 13/16IN,12-PT | 1 | |
| THXB2830A | WRENCH,BOX STANDARD LG,10DEG OFFSET 7/8 X 15/16IN,12-PT | 1 | |
| THXB3234A- | WRENCH,BOX,STANDARD LG 10DEG OFFSET 1 X 1-1/16IN,12-PT | 1 | |
| TTC343502 | STANDOFF FIX | 1 | |
| Tail Stands | 2 off Tail Stands | 1 | |
| WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 1/2"-9/16", 12-POINT | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1 /4"-5/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1 /4"-5/16", 12-POINT | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1/2"-9/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| X0605 | FRANK DRIVE OFFSET BOX (STANDARD HANDLE) | 1 | |
| XB1214A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| XB1416A | WRENCH, BOX, STANDARD LENGTH, STANDARD LENGTH, 10° OFFSET, 7/16"-1/2", 12-POINT | 1 | |
| XB1618A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| XB1820A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 9/16"-5/8", 12-POINT | 1 | |
| XB2022A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 5/8"-11/16", 12-POINT | 1 | |
| XB2224A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 11/16"-3/4", 12-POINT | 1 | |
| XB2426A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 3/4"-13/16", 12-POINT | 1 | |
| XB3032A | WRENCH BOX OFFSET STANDARD 15/16"X1" | 1 | |
| XBM1011A | WRENCH BOX OFFSET STANDARD METRIC 10X11MM | 1 | |
| XBM1012A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 10-12 MM, 12 POINT | 1 | |
| XBM1214A | WRENCH BOX OFFSET STANDARD METRIC12X14MM | 1 | |
| XBM1315A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 13-15 MM, 12 POINT | 1 | |
| XBM1415A | WRENCH BOX OFFSET STANDARD METRIC 13X15MM | 1 | |
| XBM1417A | WRENCH BOX OFFSET STANDARD METRIC 14X17MM | 1 | |
| XBM1618A | WRENCH BOX OFFSET STANDARD METRIC 16X18MM | 1 | |
| XBM1719A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 17-19 MM, 12 POINT | 1 | |
| XBM1821A | WRENCH BOX OFFSET STANDARD METRIX 18X21MM | 1 | |
| XBM2224A | WRENCH BOX OFFSET STANDARD METIC 22X24MM | 1 | |
| XDES79A | 7/32–9/32" HEX, SAE SPLINE STANDARD HANDLE 15° OFFSET BOX WRENCH | 2 | |
| XDES810A | 1/4–5/16" HEX, SAE SPLINE STANDARD HANDLE 15° OFFSET BOX WRENCH | 3 | |
| XO1012 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 5/16"-3/8", 12-POINT | 1 | |
| XO1214 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| XO1618 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| XO1820 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 9/16"-5/8", 12-POINT | 1 | |
| XO2024 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 5/8"-3/4", 12-POINT | 1 | |
| XO2428 | WRENCH BOX OFFSET STANDARD 3/4"X7/8" | 1 | |
| XO810 | DOUBLE RING WRENCH, STANDARD LENGTH DEEP 60O OFFSET, 12 POINT, SIZE 1/4"X5/16” | 1 | |
| XS1214A | STANDARD OFFSET END SPRING SPANNER | 3 | |
| XS810A | WRENCH BOX OFFSET STANDARD 5/16"X1/4" | 3 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
