| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| K71010-1 | STAND AY | 1 | |
| K71010-2 | STAND AY | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 03-5842C4000 | Tailstand, Flyaway (Ce) | 4 | |
| 10L16-4.96X2-A00-P-2.5-OM | STANDARD PHASED-ARRAY PROBE, 10 MHZ LINEAR ARRAY, 16 ELEMENTS, 0.012 IN. (0.31MM) PITCH (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| 10L16-A00 | STANDARD PHASED-ARRAY PROBE, 10 MHZ LINEAR ARRAY, 16 ELEMENTS, 0.012 IN. (0.31MM) PITCH (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| 10L64-38.4X7-A2-P-2.5-OM | STANDARD PHASED ARRAY PROBE-U8330658 | 1 | |
| 186A-F | Boeing Standard, 737/747 PT6 51-00-00:PG6 FIG1 DETAILII, 2 LAYERS/6 HOLES | 1 | |
| 50000 | ACF-50 HANDHELD SPRAY SYSTEM OR ACF-50 STANDARD PUMP SPRAY SYSTEM-50000 OR 50003 | 1 | |
| 50003 | ACF-50 HANDHELD SPRAY SYSTEM OR ACF-50 STANDARD PU | 3 | |
| 600113 | STAND: FLOOR,DISPLAY,GLOVE,CARDBOARD, KOMODO | 1 | |
| 2000635 | AERO Maintenance/Fueling stand, 7 foot platform height. Features include heavy duty tug towable caster mounted base with ground locks. 450 lbs. capacity stairway has aircraft protection bumpers. | 1 | |
| 2001099 | B-7 (2011) Maintenance & Crew Access Stairway/Stand. 7' to 15' platform height, 7' to 20' working height. Wide 4'x7' platform and full bumpers (handles DC-9, 727, DC8, 757, 767, A300, A310, A320 series airframes). | 1 | |
| 2001102 | B-2 (2698) Maintenance & Crew Access Stairway/Stand. 10' to 19' Platform Height, Air Powered powered hydraulic lift with back-up hand pump. 4'x9' platform, sliding rail on left side of platform allows aircraft door opening, full front bumper. Note: This | 1 | |
| 212EFTAY | 212EFTAY (1/4 AND 3/8" DRIVE STANDARD HEX BIT SOCKET SET) | 4 | |
| 25-7Y25A | STAND - LAY-BY | 1 | |
| 254A1290-2 | RH BRAKE AY-ENG STAND | 1 | |
| 254A1290-4 | RH BRAKE AY-ENG STAND | 1 | |
| 254A1290-6 | RH BRAKE AY-ENG STAND | 1 | |
| 2683201-1 | REFERENCE STANDARD AY | 2 | |
| 2683301-1 | REFERENCE STANDARD AY | 4 | |
| 30-808-1231 | Sylvac 30-808-1231 Horizonal Stand Integral Display 25mm | 1 | |
| 30-808-1232 | Sylvac 30-808-1232 Horizonal Stand Integral Display 50mm | 1 | |
| 342100-1 | STAND AY FULL ENGINE | 1 | |
| 41034G02 | DAVID CLARK (DC) CLAA99- 14CRG 4-BAY BATTERY CHARGER FOR 9900/9100 SYSTEM BATTERIES. THE 4- BAY BATTERY CHARGER (CLAA99- 14CRG) REQUIRES A STANDARD 110V CORD WITH A THREE-PRONG PLUG FOR CHARGING | 3 | |
| 53-10-110A | Raytheon 125 Series Calibration Standard. Material: 4340 Cres Steel. Includes Test Report and Certificate of Conformance. | 2 | |
| 53-10-110A/1 | Raytheon Calibration Standard, 125 Series, 53-10-110A Fig 2 | 1 | |
| 53-10-110A/2 | Raytheon Calibration Standard, 125 Series, 53-10-110A Fig 2 | 1 | |
| 53-20-149/1 | MLG BAY REFERENCE STANDARD -NO | 1 | |
| 5L16-A00 | STANDARD PHASED-ARRAY PROBE, 5 MHZ LINEAR ARRAY, 16 ELEMENTS, 0.012 IN. (0.31 MM) PITCH (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| 5L60-60X10-A14-P-2.5-OM | STANDARD PHASED ARRAY PROBE | 1 | |
| A0BA5534 | Stand - Engine layby | 1 | |
| A10L16-00-25Q | STANDARD PHASED ARRAY PROBE (NDT) | 1 | |
| A330-92480-0001 | Stand booom flyaway | 1 | |
| A99-14CRG | DAVID CLARK (DC) CLAA99- 14CRG 4-BAY BATTERY CHARGER FOR 9900/9100 SYSTEM BATTERIES. THE 4- BAY BATTERY CHARGER (CLAA99- 14CRG) REQUIRES A STANDARD 110V CORD WITH A THREE-PRONG PLUG FOR CHARGING | 1 | |
| ACF-50 | ACF-50 HANDHELD SPRAY SYSTEM OR ACF-50 STANDARD PUMP SPRAY SYSTEM-50000 OR 50003 | 1 | |
| AFK-1002 | CUSTOM BRITISH AIRWAYS KIT 1. Contains one each of Boeing 1002 Reference Standard, ATPN-92-12.5FX , ATPN-93-5B, ABNC-MD6, in a waterproof storage case. Includes test reports and Certificate of Conformance. | 1 | |
| AFK-1011 | CUSTOM BRITISH AIRWAYS KIT 2. Contains one each of Boeing 1004 Reference Standard, ATPN-92-12.5FX , ATPN-93-5B, ABNC-MD6, in a waterproof storage case. Includes test reports and Certificate of Conformance. | 1 | |
| AFK-1016 | CUSTOM BRITISH AIRWAYS KIT 3. Contains one each of Boeing 1005 Reference Standard, ATPN-92-12.5FX , ATPN-93-5B, ABNC-MD6, in a waterproof storage case. Includes test reports and Certificate of Conformance. | 1 | |
| AFNDT-3071 | Custom designed eddy current multi-layer aircraft aluminum skin test specimen, drawing 2, sheets 1-4. reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3277 | Custom 2 Layer 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. 36 Total EDM Notches.1.) EDM Notch Specifications: .030 x .030 Corner EDM Notches in each Hole. 2.) Faying Surfa | 1 | |
| AFNDT-3413 | Custom Boeing Eddy Current Hole Standard. Hole Sizes: .159 & .190"Ø. With one of each hole size plugged. Material: 2024-T3 Aluminum. Plugged holes contain a BACR15BA6A8C Rivet in the .056" plate. Apply BMS 545 sealant between each layer Includes Test Repo | 1 | |
| AGE-04900-401 | EDDY CURRENT INSTRUMENT - IMPEDANCEPLANE DISPLAY OR SIMILAR REFERENCE STANDARD, NDI, ALUMINUM7050-T7451 | 4 | |
| AN670-55-31-102 | CALIBRATION REFERENCE STANDARD (CRS), MADE OF ALUMINUM WITH MULTIPLE LAYERS CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| AN670-55-31-110 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| AT-3132 | REFLECTOR TO FIT STANDARD APERTURE WITH CLAMPS (RAYCHEM) | 2 | |
| C-130-WR | C-130 Outer Wing Rainbow Fitting Bolt Hole Standard C-130, 2 Layers, 3 HOLES, 3/4", 7/8" and 1.0" with .004" X .030" X .030" EDM Notches in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| C16786GA02 | INTEGRATED STANDBY FLIGHT DISPLAY | 1 | |
| CLAA99-14CRG | 4-BAY BATTERY CHARGER FOR 9900/9100 SYSTEM BATTERIES. THE 4-BAY BATTERY CHARGER (CLAA99-14CRG) REQUIRES A STANDARD 110V CORD WITH A THREE-PRONG PLUG FOR CHARGING | 1 | |
| CP30596-2 | ENGINE TRANSPORTATION STAND TAY 620 EN | 1 | |
| CP30596-4 | STAND - ENGINE TRANSPORT TAY | 4 | |
| CP30596-5 | Engine STAND - TAY 610-8 , 611-8 , 620-15 , 650-15 , 651-54 , 611-8C | 1 | |
| CP30596/5 | TRANSIT STAND - TAY 610-8 , 611-8 , 620-15 , 650-15 , 651-54 , 611-8C | 1 | |
| CP30599-2 | ENGINE REAR SUPPORT TRANSIT STAND - TAY | 4 | |
| CP30599/2 | ENGINE REAR SUPPORT TRANSIT STAND - TAY | 4 | |
| CP30600- | TRUNNION ASSY TRANSIT STAND - TAY | 1 | |
| CP30600-1 | TRUNNION ASSY TRANSIT STAND - TAY | 2 | |
| CP30600-2 | TRUNNION ASSY TRANSIT STAND - TAY | 1 | |
| CP30600/1 | TRUNNION ASSY TRANSIT STAND - TAY | 2 | |
| CP30604 | SLING - TOP FRAME OF TAY TRANSIT STAND - TAY 610-8 , 620-15 | 1 | |
| CP30616-3 | DRESSING STAND - ENGINE WITH NOSE COWL AND JET PIPE - TAY 183-03 | 3 | |
| CP30616/3 | DRESSING STAND - ENGINE WITH NOSE COWL AND JET PIPE - TAY 183-03 | 3 | |
| CP30626 | ADAPTOR SET ENGINE TRANSIT STAND - QECU - TAY 610-8 & 620-15 | 1 | |
| CP30956-4 | STAND - ENGINE TRANSPORTATION TAY | 1 | |
| D38772 | JES TEST STAND (MAY BE CALLED AN APU) | 1 | |
| DLH-1 | STANDARD DELAY. POLYSTYRENE 1/4 IN. DIAMETER, 10 MICROSECOND DELAY(0.45IN LONG), FITS 0.25 IN. REPLACEABLE DELAY LINE TRANSDUCERS | 1 | |
| DLH-2 | STAND DELAY LINE | 1 | |
| DLT.187-P | Persplex(Lucite) Delay Tip(Standoff) for MRD-1501-HR Transducer. | 1 | |
| EX601R51093 | Calibration reference standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EX604-60024 | CALIBRATION REFERENCE STANDARD MULTI-LAYERED ALUMINUM ALLOY FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 2 | |
| EX604−60024 | Calibration reference standard multi−layered aluminum alloy fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 2 | |
| EXBC670-59141 | CALIBRATION REFERENCE STANDARD MULTI LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59145 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59148 | CALIBRATION REFERENCE STANDARD (CRS) MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670-59157-003 | CALIBRATION REFERENCE STANDARD, MULTIPLE LAYERED FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXBC670-59158 | CALIBRATION REFERENCE STANDARD (CRS) MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.). | 1 | |
| EXBC670-59159 | CALIBRATION REFERENCE STANDARD(CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM)NOTCHES (MHIRJ). | 1 | |
| EXBC670-59160 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERED FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EXBC670-59164 | CALIBRATION REFERENCE STANDARD MULTIPLE LAYERS ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59177 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59178 | CALIBRATION REFERENCE STANDARD, MULTIPLE LAYER FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXBC670-59179 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 1 | |
| EXBC670-59180 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59181 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670-59182 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 1 | |
| EXBC670-59183-001 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) TRANSDUCER - ANGLE BEAM, 5.0 MHZ, 0.375 IN. (9.53 MM) H X | 1 | |
| EXBC670-59185 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EXBC670−59044 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59068 | Calibration reference standard multiple layered assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59141 | Calibration reference standard multi layers fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59145 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59148 | Calibration Reference Standard (CRS) multiple layers fastened assembly that contains electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59153 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59157 | Calibration reference standard multiple layered fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59158 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | 1 | |
| EXBC670−59159 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | 1 | |
| EXBC670−59164 | Calibration Reference Standard multiple layers assembly that contains electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59177 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59178 | Calibration reference standard multiple layer fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59180 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59181 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EddyFi Array Probe (Standard) | EddyFi Array Probe (Standard) | 1 | |
| F84ED0011 | STAND-RACE WAY SHIELD ASSY_[F84ED0011] | 1 | |
| FTH5K-1625M-16-AC-19-S | FTH5K-1625M-16-AC-19-S;Package FTH5K; 1625nm M; 16p LCAPC; AC-Rear Tray; 19in; USB adp; Standalone | 1 | |
| FTH5K-1650M-16-AC-19-S | FTH5K-1650M-16-AC-19-S;Package FTH5K; 1650nm M; 16p LCAPC; AC-Rear Tray; 19in; USB adp; Standalone | 1 | |
| HC130H0269-000 | Stand APU Mobile (layby) Sundstrand | 1 | |
| IAE1J12188 | SAFETY STAY STAND | 24 | |
| J53001-5 | Standoffay | 3 | |
| J71038-1 | Standay | 5 | |
| J71038-2 | Standay | 5 | |
| M1-G-KIT | STANDARD M1-G METER HAS GREEN DISPLAY WITH RESOLUTION OF 0.01 MILLIOHMS | 6 | |
| MIL-PRF-32133 | X-RAY TUBE HEAD STAND | 1 | |
| NDT 1086-032 | Boeing Standard, .032" Bottom Layer | 3 | |
| NDT 1086-040 | Boeing Standard, .040" Bottom Layer | 3 | |
| NDT 1086-050 | Boeing Standard, .050" Bottom Layer | 3 | |
| NDT 1086-060 | Boeing Standard, .060" Bottom Layer | 3 | |
| NDT 1086-070 | Boeing Standard, .070" Bottom Layer | 3 | |
| NDT 1086-080 | Boeing Standard, .080" Bottom Layer | 3 | |
| NDT 1086-090 | Boeing Standard, .090" Bottom Layer | 3 | |
| NDT 1086-100 | Boeing Standard, .100" Bottom Layer | 3 | |
| NDT 1086-110 | Boeing Standard, .110" Bottom Layer | 3 | |
| NDT 1086-120 | Boeing Standard, .120" Bottom Layer | 3 | |
| NDT 1094-090 | PHASED ARRAY REFERENCE STANDARD | 2 | |
| NDT1069A-0.010 DEEP/.045 SKIN | Boeing Standard, .010 deep notch in .045 (-1 layer) skin, no feeties | 1 | |
| NDT1085-032 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .032" Top Layer | 3 | |
| NDT1085-036 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .036" Top Layer | 3 | |
| NDT1085-050 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .050" Top Layer | 2 | |
| NDT1085-063 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .063" Top Layer | 2 | |
| NDT1085-071 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .071" Top Layer | 2 | |
| NDT1085-080 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .080" Top Layer | 2 | |
| NDT1085-090 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .090" Top Layer | 2 | |
| NDT1085-100 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .100" Top Layer | 2 | |
| NDT1085-112 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .112" Top Layer | 2 | |
| NDT1085-125 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .125" Top Layer | 2 | |
| NDT6019 | BOEING REFERENCE STANDARD 767 Part 6 52-32-06 Page 6 Figure 2. Material: 7075-T6 on Layer 1, 2, and 3, 2024 on Layer 4. Includes Test Report and Certificate of Conformance. | 2 | |
| NGTAY611-8 | TAY611-8 ENGINE STAND | 1 | |
| Olympus Phased Array Weld Inspection Kit | Olympus Phased Array Weld Inspection Kit - he kit contains the following items:, qty 2 A12 5L64 PA probes with 5m cable., qty 2 SA12 N55S Standard Wedge with Removable IHC Ring, qty 1 ‘Y’ Splitter 64/64, for Omniscan MX2, 5m split conduit, Irrigation Tubi | 1 | |
| P8-STD-P036 | Boeing Standard 6AL-4V & 2024-T3 Muti-Layered. 20 Holes, 40 corner notches | 1 | |
| P8A-STD-P028B | Reference Standard, Top layer .100" 2024T3, 2nd layer .100" 2024T3, 3rd layer .080" 7075T6 | 1 | |
| PS-COTS-QSG | PS-COTS-QSG;One-day Onsite Standard QuickStart Services Training for Observer COTS | 1 | |
| PS-STANDARD-QUICKSTART-3 | PS-STANDARD-QUICKSTART-3;Three-Day Onsite Standard QuickStart Services Training | 1 | |
| PSV-STANDARD-QSG-3 | PSV-STANDARD-QSG-3;3-Day Onsite QuickStart Services Voucher - Valid for 6 months from purchase | 1 | |
| PWA21350-47 | STANDARD X-RAY | 1 | |
| PWC70907 | ENGINE STAND AY | 3 | |
| PWC71835 | ENGINE STAND AY | 9 | |
| QXFD2PT008PQ04 | QX NO RADIO, DISPLAY, 20V PISTOL 8NM STANDARD, 1/4" QUICK CONNECT | 1 | |
| RT115-015 | PARKER BAYSIDE: RT SERIES STEALTH MULTIDRIVE GEARBOX, RIGHT ANGLE, HOLLOW SHAFT, 115MM FRAME SIZE, 15:1 RATIO, STANDARD BACKLASH | 1 | |
| S3S21212000 | ADAPTOR MAIN MOUNT LAYBY STAND | 1 | |
| SB 57-3329 FIG.9 | Raytheon 12 Hole Standard Calibration Block Figure 9 Page 20, Service Bulletin SB 57-3329. Hole sizes 9/64, 11/64,3/16 and 13/64. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| SK601R-30008A | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERED FASTENED ASSEMBLY, EQUIVALENT IN MATERIAL AND THICKNESS AS THE INSPECTION AREA CONTAINING SUBSURFACE ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 6 | |
| SK601R-30009-1 | CALIBRATION STANDARD, CANADAIR JET CRJ200 PT4 53-61-153: FIG 1 PG 6, 2 LAYERS OF .063 2024-T3 WITH 1 | 5 | |
| SN09530004-3 | Douglas Standard w/ Certs, DC9:SN09530004 SHEET13 FIG2.0 & 2.1, -5 & -7 Layers | 1 | |
| SOEX710 | STANDARD WRENCH (MAY OPEN) | 2 | |
| SPO-3932 | SLIDING PROBE CRACK STANDARD 2ND LAYER ALUMINUM - 1916915 -OLYMPUS | 1 | |
| T-TL610 | 4WAY VALVE TOOL STANDARDE BORE | 1 | |
| TAY-620-15 ENGINE STAND | TAY-620-15 ENGINE STAND | 1 | |
| TAY611-08 | TAY611-08 ENGINE STAND | 1 | |
| TAY611-8 ENGINE STAND | TAY611-8 ENGINE STAND | 1 | |
| TEK-6200-A | Hole Standard, 20 Holes 5/32" to 3/4", with Countersinks, .020" thru Notch at CS to Fay, .030" corner in top plate, 7075T6 Aluminum | 1 | |
| TEK-6200-S | Hole Standard, 20 Holes 5/32" to 3/4", with Countersinks, .020" thru Notch at CS to fay, .030" corner in top plate, 4340 | 1 | |
| TEK-6200-T | Hole Standard, 20 Holes 5/32" to 3/4", with Countersinks, .020" thru Notch at CS to fay, .030" corner in top plate, T6AL4V | 1 | |
| TRDS-12 | STANDARD DELAY | 1 | |
| TRDS-25-.450 | STANDARD DELAY. POLYSTYRENE 1/4 IN. DIAMETER, 10 MICROSECOND DELAY(0.45IN LONG), FITS 0.25 IN. REPLACEABLE DELAY LINE TRANSDUCERS | 1 | |
| U8330115 | Standard Phased Array Probe 10L32-9.9X7-A1-P-2.5-OM-TOP (NDT) | 1 | |
| U8330134 | Standard Phased Array Probe 5L64-64X7-NW1-P-2.5-OM (NDT) | 2 | |
| U8770054 | DLH-1 : Standard Delay. Polyst | 1 | |
| WNG-3NDI-XRS599-02 | Reference Standard, Rear Spar Layer | 1 | |
| WNG-3NDI-XRS599-03 | Reference standard, Lower Skin Layer | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
