| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0002165332-771 | SQUARE | 1 | |
| 6137MT000-064 | SQUARE | 1 | |
| 6259MT000-146 | SQUARE | 1 | |
| 8 B5Q10 LONG | Square | 1 | |
| K47001-61 | SQUARE | 1 | |
| K47001-62 | SQUARE | 1 | |
| K52052-7 | SQUARE | 1 | |
| LST50303 | SQUARE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 6004MFRMH | MICRO-ADJUSTABLE CLICK TYPE TORQUE WRENCHES ( SQUARE DRIVE: 3.4" )( TORQUE RANGE: 100-600 FT.-LBS. )( INCREMENTS: 5 ) (CALIBRATION) | 2 | |
| 012N8928-126 | TOP KIT - BLOWOUT PANEL ASSEMBLY, SQUARE | 1 | |
| 03110014 | 50.DSQ.14-*OBS*1/2" SOCKETS, DBLE SQUARE | 1 | |
| 0319160310 | STRAIGHT SQUARE 45x26,5 | 1 | |
| 0319160320 | STRAIGHT SQUARE 53x31,5 | 1 | |
| 05042750001 | WERA - 5042750001 FEMALE SQUARE 784 A QUICK-RELEASE CHUCK, ADAPTOR 1/4 | 1 | |
| 051115-69043 | 3M 051115-69043 Scotch-Weld EPX Square Orange 45 mL Mixing Nozzle | 1 | |
| 08200013 | 1359.M.10-M10 TRI-SQUARE XZN BITS | 1 | |
| 08200014 | 1360.M.12-M12 TRI-SQUARE XZN BITS | 1 | |
| 0620740120 | SQUARE FITTED | 1 | |
| 08-00178-01 | WRENCH, TORQUE, TORQUE ADJUSTABLE, MATL CHROME-VANADIUM STEEL, DRIVE RATCHET, SIZE-DRV 3/8 IN SQUARE, TORQ 5 - 50 NM, LG 400 MM | 1 | |
| 08-1100T | TUNGSTEN BUCKING BAR SQUARE | 1 | |
| 08200004 | 1350.M.4-M4 TRI-SQUARE XZN BITS | 1 | |
| 08200010 | 1356.M.5-M5 TRI-SQUARE XZN BITS | 1 | |
| 08200011 | 1357.M.6-M6 TRI-SQUARE XZN BITS | 1 | |
| 08200012 | 1358.M.8-M8 TRI-SQUARE XZN BITS | 1 | |
| 0620660070 | SQUARE FITTED | 1 | |
| 0AT-2193 | OUTLINE ADAPTER SQUARE DRIVE CLUTCH SET RUN IN | 1 | |
| 0U141857 | SQUARE PIN WRENCH | 1 | |
| 10-180-907U | 12"/300MM COMBINATION SQUARE MITUTOYO | 1 | |
| 10002MRMH | Micro-Adjustable Click Type Torque Wrenches (Square drive: 3/8") (Torque range: 150-1000 in.-lbs.) (Increments: 5) (Add to cart: Add To Cart) | 4 | |
| 10005MFRMH | Micro-Adjustable Click Type Torque Wrenches (Square drive: 3/8") (Torque range: 150-1000 in.-lbs.) (Increments: 5) (Add to cart: Add To Cart) (Square drive: 1") (Torque range: 200-1000 ft. lbs.) (Increments: 5) (Add to cart: Add To Cart) | 2 | |
| 10T | FILE, THREE SQUARE 10" | 1 | |
| 11G-212-52-10-0726-1 | SQUARE NUT ANGLE WRENCH | 1 | |
| 11H-12-16R | STARRETT® 12" Combination Square - USA MADE! | 1 | |
| 11H-6-16R | STARRETT® 6" Combination Square - USA MADE! | 1 | |
| 11H12-18R | STARRETT 12” – COMBINATION SQUARE | 1 | |
| 12-102 | SQUARE: FOR CHECKING RIGHT ANGLES. | 1 | |
| 12299 | PEG ADAPTOR SQUARE DRIVE | 1 | |
| 14275 | MACHINIST SQUARES SET OF 3 | 1 | |
| 14544 | FIRST QUALITY SCALE COMBINATION SQUARE BLADE 24" SILVER (RIGID) | 1 | |
| 120142 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 1" Oal) | 1 | |
| 120143 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 2" Oal) Pin Type | 1 | |
| 120144 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 3" Oal) | 1 | |
| 120146 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 6" Oal) | 1 | |
| 120147 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 8" Oal) | 1 | |
| 120148 | Square Dr. Adapter (3/8 Sq. Dr x 1/4 Hex x 2" Oal) | 1 | |
| 120149 | Square Dr. Adapter (3/8 Sq. Dr x 1/4 Hex x 3"L) Pin Type | 1 | |
| 120225 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 1 3/8 Oal) | 1 | |
| 120315 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 2" Oal) Ball Type | 1 | |
| 120504 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 4" Oal) Pin Type | 1 | |
| 1206 GS | Square Drive Adapter | 6 | |
| 1206GS | SET SQUARE DRIVE ADAPTORS | 6 | |
| 122504 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 4" Oal) | 1 | |
| 12030001 | SQUARE DRIVE ADAPTOR | 1 | |
| 13-627-5 | TRY SQUARE | 1 | |
| 13-633-3 | SQUARE, MACHINIST SET | 1 | |
| 13-634-1 | SQUARE, MACHINIST SET | 1 | |
| 13-635-8 | MACHINIST SQUARE SETS4 PC SET 4, 6, 9 & 12” | 1 | |
| 14T-1/2 | PUSH-THROUGH SQUARE RATCHET HEAD WITH RECTANGULAR CONNECTOR ½ 14X18 | 1 | |
| 15030006 | ADAPTOR SQUARE DRIVE 3/4" INTERNAL x 1" EXTERNAL | 1 | |
| 1503MFRMH | Micro-Adjustable Click Type Torque Wrenches (Square drive: 3/8") (Torque range: 150-1000 in.-lbs.) (Increments: 5) (Add to cart: Add To Cart) (Square drive: 1") (Torque range: 200-1000 ft. lbs.) (Increments: 5) (Add to cart: Add To Cart) (Square drive: 1/ | 3 | |
| 180-202 | Mitutoyo 180-202 - Combination Square Set - Centre Head | 1 | |
| 180-907B | 12"/300MM COMBINATION SQUARE MITUTOYO | 1 | |
| 1922 | SOCKET - HEX, 2 5/8 INCH, 6 POINT, 3/4 INCH SQUARE DRIVE | 24 | |
| 2 PCS | BLOCK GAGE (SQUARE TYPE ) | 1 | |
| 20-100 | TORQUE WRENCH + 1/2'' SQUARE DRIVE RATCHET + CASE | 2 | |
| 20-350 | Socket Drive Angle Drill Attachments (Description: 90° Angle Head, 1/4 Square Drive) (Diameter: 3/4" (19 mm)) (Head size: 1.60" (41 mm)) (Overall length: 7" (178 mm)) (Side to center: 1-3/8" (35 mm)) (Add to cart: Add To Cart) | 1 | |
| 20-90424 | Keyless Impact Chucks (Capacity (aluminum steel): 3/32" to 3/8") (Square drive mount: 3/8") (Overall length (open): 2-3/32" (53 mm)) (Add to cart: Add To Cart) | 1 | |
| 20-90430 | Keyless Impact Chucks (Capacity (aluminum steel): 3/32" to 3/8") (Square drive mount: 3/8") (Overall length (open): 2-3/32" (53 mm)) (Add to cart: Add To Cart) (Capacity (aluminum steel): 1/8" to 1/2") (Square drive mount: 1/2") (Overall length (open): 2- | 1 | |
| 2002MRMH | Micro-Adjustable Click Type Torque Wrenches (Square drive: 3/8") (Torque range: 150-1000 in.-lbs.) (Increments: 5) (Add to cart: Add To Cart) (Square drive: 1") (Torque range: 200-1000 ft. lbs.) (Increments: 5) (Add to cart: Add To Cart) (Square drive: 1/ | 3 | |
| 2007A112 | COMBINATION SQUARE | 1 | |
| 2007A7 | COMBINATION SQUARE | 1 | |
| 2007A8 | COMBINATION SQUARE | 1 | |
| 21WM79 | WESTWARD IMPACT SOCKET ADAPTER: 1 IN INPUT DRIVE SIZE, BLACK OXIDE, 3/4 IN OUTPUT DRIVE SIZE, SQUARE | 1 | |
| 22JL19 | SQUARE SHEAR | 1 | |
| 231 | THREE-SQUARE SCRAPER | 3 | |
| 2364A65 | SQUARE WITH GRADUATIONS ON BOTH BLADES | 1 | |
| 24-319-9 | 0-.250" X .001" DIAL INDICATOR (X2) (Drop Indicator Spindle Square FOR MACHINE SHOP) | 1 | |
| 2503MFRMH | Micro-Adjustable Click Type Torque Wrenches (Square drive: 3/8") (Torque range: 150-1000 in.-lbs.) (Increments: 5) (Add to cart: Add To Cart) (Square drive: 1") (Torque range: 200-1000 ft. lbs.) (Increments: 5) (Add to cart: Add To Cart) (Square drive: 1/ | 2 | |
| 250B 1/4 | ADAPTER, 1/4" HEX TO 1/4" SQUARE DRIVE | 1 | |
| 2C81434 | SPLINE, DRIVE SQUARE | 1 | |
| 3/4-SQ-UNI-HEAD | RB211-3/4 SQUARE UNIVERSAL HEAD TOOL | 1 | |
| 3325B | TOOL - SQUARESINEWAVE SIGNAL | 2 | |
| 3CU7-125AN | SQUARE MESH | 1 | |
| 40-0524 | FRAMING SQUARE | 1 | |
| 4003 | Moore & Wright Engineers Square Grade B 3"/75mm | 1 | |
| 4003R | Moore & Wright Retail Pack Engineers Square 3"/75mm B | 1 | |
| 4004 | Moore & Wright Engineers Square Grade B 4"/100mm | 4 | |
| 4006 | Moore & Wright Engineers Square Grade B 6"/150mm | 1 | |
| 4009 | Moore & Wright Engineers Square Grade B 9"/225mm | 1 | |
| 30314 | 5/16", 4 FLUTE STI TAP EXTRACTOR WITH SQUARE SHANK | 1 | |
| 40012 | Moore & Wright Engineers Square Grade B 12"/300mm | 1 | |
| 2000674 | AERO Hydraulic hand pump retro-fit lift kit for all square or round towbars up to 4 1/2" O.D. Includes mounting hardware and wheels. | 1 | |
| 23005430 | REAR SUPPORT CONCENTRICITY AND SQUARENESS CHECKING FIXTURE | 2 | |
| 290804208 | 90 DEGREE SQUARE PREISSER,Germany | 1 | |
| 4004R | Moore & Wright Retail Pack Engineers Square 4"/100mm B | 1 | |
| 402-911 | HEATSHIELD SET (square side windows) (set of 14) | 1 | |
| 40200TW38I | CEMENTEX INSULATED TORQUE WRENCH, 3/8" SQUARE DRIVE, 40-200 LBF.IN | 1 | |
| 40200TW8I | CEMENTEX INSULATED TORQUE WRENCH 3/8" SQUARE DRIVE, 40-200 IBFD.IN | 1 | |
| 422698 | SQUARE DRIVE WRENCH | 1 | |
| 40384252 | 90 DEGREE SQUARE | 1 | |
| 4114FJ10PBO | SQUARE CORNER LID RED | 1 | |
| 4114FJ10PC | SQUARE CORNER LID BLACK | 1 | |
| 4114FJ10PCM | SQUARE CORNER LID ROYAL BLUE | 1 | |
| 4114FJ10PDG | SQUARE CORNER LID MIDNIGHT BLU | 1 | |
| 4114FJ10PJK | SQUARE CORNER LID ORANGE | 1 | |
| 42-315 | DURABLE COMBINATION SQUARE WITH A STAINLESS STEEL BLADE FOR PRECISE MEASUREMENTS AND RIGHT ANGLES. | 1 | |
| 429BF-5000-15 | LABEL, ORANGE SQUARE | 1 | |
| 431 | SQUARE DRIVE ADAPTOR | 3 | |
| 4457A41 | HIGH-ACCURACY TORQUE TOOL TESTER BENCH TOP, 1/4" SQUARE DRIVE, 5 TO 50 IN.-LBS/ 0.4 TO 4.17 FT.-LBS WITH CALIBRATION CERTIFICATE WITH TEST DATA TRACEABLE TO NIST CERTIFICATE OF CALIBRATION | 1 | |
| 4457A43 | HIGH-ACCURACY TORQUE TOOL TESTER BENCH TOP, 3/8" SQUARE DRIVE, 25 TO 250 IN.-LBS./2 TO 21 FT.-LBS. WITH CALIBRATION CERTIFICATE WITH TEST DATA TRACEABLE TO NIST CERTIFICATE OF CALIBRATION | 1 | |
| 4457A45 | HIGH-ACCURACY TORQUE TOOL TESTER BENCH TOP, 1/2" SQUARE DRIVE, 300 TO 3,000 IN.-LBS./25 TO 250 FT.-LBS. CALIBRATION WITH CERTIFICATE WITH TEST DATA TRACEABLE TO NIST CERTIFICATE OF CALIBRATION | 1 | |
| 4457A46 | HIGH-ACCURACY TORQUE TOOL TESTERBENCH TOP, 3/4" SQUARE DRIVE, 720 TO 7,200 IN.-LBS./60 TO 600 FT.-LBS.WITH CALIBRATION CERTIFICATE WITH TEST DATA TRACEABLE TO NIST CERTIFICATE OF CALIBRATION | 1 | |
| 4550-20 | SQUARE MECHANICAL TORQUE WRENCH | 1 | |
| 46-012 | SQUARE, COMBINATION | 1 | |
| 49-R1US | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) | 1 | |
| 49-R2UR | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R2US | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R3FR | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R3FS | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R3UR | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R3US | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R4FR | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R4FS | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R4UR | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R4US | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R5FR | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R5FS | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R5UR | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R5US | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R6FR | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R6FS | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R6UR | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R6US | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R7FR | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R7FS | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R7UR | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 49-R7US | Diamond Plated Routers (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Radius End) (Add to cart: Add To Cart) (Head length: 1/4" (6.35 mm)) (Outside diameter: 1/8") (Type: Unfluted, Square End) (Add to cart: Add To Cart) (Head leng | 1 | |
| 501127 | Cylinder Square | 2 | |
| 50181040 | WRENCH TORQUE STEEL SINGLE END 14X18MM; M END DRIVE W/SQUARE LOCATION FOR ADAPTER; NSN 5120123699145 | 1 | |
| 501MRMH | MICRO-ADJUSTABLE CLICK TYPE TORQUE WRENCHES ( SQUARE DRIVE: 1/4" )( TORQUE RANGE: 10-50 IN.-LBS. )( INCREMENTS: 1 ) | 2 | |
| 5109KV | HAZET 5109KV TORQUE WRENCH WITH PROTECTIVE INSULATION, 5-25 NM, 10MM (3/8") SQUARE | 1 | |
| 513721 | INSPECTION LAMP, MODEL 2Z-24A UV-A LIGHT (BLACKLIGHT), MINIMUM POWER RATING OF 100 WATTS AND MUST PRODUCE A MINIMUM BLACK LIGHT INTENSITY OF 1200 AND A MAXIMUM OF 10000 MICROWATTS PER SQUARE CENTIMETER AT 15 INCHES (381 MM) (MAGNAFLUX OR EQUIVALENT) | 1 | |
| 5075800001 | SAFE-TORQUE A 1 TORQUE WRENCH WITH 1/4" SQUARE HEAD DRIVE, 2-12 NM | 1 | |
| 509-4959 | BAHCO 1/2 IN SQUARE HANDLE | 1 | |
| 52-375-012 | FOWLER,COMBINATION,SQUARE,SET,12 IN | 1 | |
| 5254 | SQUARE DRIVE ADAPTORS 1/2" - 3/8" | 1 | |
| 52725A34 | BIT; HEX SHANK ASSORTMENT WITH ADAPTER, 30-PIECE, STEEL, SLOTTED SQUARE, EXTERNAL HEX | 1 | |
| 52735A21 | HEX SHANK TO SQUARE DRIVE ADAPTERS | 1 | |
| 53-540AK | BREAK LOOSE TOOL KIT (USATCO) 3/8" SQUARE DRIVE | 1 | |
| 53-542AK | **OBSOLETE**BREAK LOOSE KIT 1/2" SQUARE DRIVE | 1 | |
| 5385A16 | RATCHET WRENCHES, 3/8" SQUARE DRIVE SIZE | 1 | |
| 54765A12 | SCREW DRIVER; SQUARE DRIVE TORQUE MEASURING, 0 TO 384 | 1 | |
| 5522A33 | 3/8" FEMALE X 1/2" MALE SQUARE DRIVE ADAPTER, CHROME | 1 | |
| 5522A41 | SQUARE DRIVE SIZE ADAPTERS | 1 | |
| 55315A21 | ADAPTER; SQUARE DRIVE, BLACK, 3/8 | 1 | |
| 5558A29 | 1/4'' SQUARE DRIVE PREMIUAM SOCKET SET 25 PIECES | 1 | |
| 55RNAL-3T-4 | 55RNAL-3T-4 CLECO 55RNAL-3T-4 ANGLE NUTRUNNER 55 SERIES, 1/2'' SQUARE DRIVE (43-95FT-LBS. / 58-129NM) | 5 | |
| 5852089 | 3/4" FEMALE SQUARE 1 1/2" MALE SQUARE | 1 | |
| 58240004 | 734/4-1/4" SQUARE DRIVE INSERT TOOL | 1 | |
| 58240005 | 734/5-3/8" SQUARE DRIVE INSERT TOOL | 1 | |
| 58240010 | 734/10-1/2" SQUARE DRIVE INSERT TOOL | 1 | |
| 58240020 | 734/20-1/2" SQUARE DRIVE INSERT TOOL | 1 | |
| 58240040 | 734/40-3/4" SQUARE DRIVE INSERT TOOL | 1 | |
| 58240080 | 734/80-3/4" SQUARE DRIVE SHELL TOOL | 1 | |
| 58240100 | 734/100-3/4" SQUARE DRIVE INSERT TOOL | 1 | |
| 58241004 | 734F.1/4-1/4" SQUARE DRIVE INSERT TOOL | 1 | |
| 58241005 | 734F/5-3/8" SQUARE DRIVE INSERT TOOL | 1 | |
| 58242005 | 734L/5-3/8" SQUARE DRIVE INSERT TOOL | 1 | |
| 5836025-22 | SQUARE DRIVE ADAPTOR | 1 | |
| 58521087 | ADAPTER SQUARE DRIVE 1/4" INTERNAL 3/4" EXTERNAL | 1 | |
| 58521088 | ADAPTER SQUARE DRIVE 3/8" INTERNAL 3/4" EXTERNAL | 1 | |
| 58521089 | 7789-SQUARE DRIVE ADAPTOR | 1 | |
| 58523089 | 7789-2-SQUARE DRIVE ADAPTER | 1 | |
| 58524089 | 7789-3-SQUARE DRIVE ADAPTER | 1 | |
| 58524090 | 1/4"FEMALE SQUARE 1/2"MALE 58524090 | 1 | |
| 58524091 | 3/8" SQUARE FEMALE 1/2" MALE 58524091 | 1 | |
| 59010001 | 70.V.1-SQUARE DRIVE UNIT 1/4"-1/4" | 1 | |
| 59010003 | 70.V.3-SQUARE DRIVE UNIT 3/8"-3/8" | 1 | |
| 59010005 | ADAPTER SQUARE DRIVE 1/2" TO 3/8" | 1 | |
| 59010007 | 70.V.7-SQUARE DRIVE UNITS 1/2"-1/2" | 1 | |
| 59010008 | 70.V.8-SQUARE DRIVE UNIT 3/4"-3/4" | 1 | |
| 59010011 | 502.1/2-SQUARE DRIVE (FOR SOC)1/2"-1/2 | 1 | |
| 59010014 | 70.V.11-SQUARE DRIVE UNIT 3/8"-1/4" | 1 | |
| 59010015 | 70.V.12-SQUARE DRIVE UNIT 3/4"-3/4" | 1 | |
| 59010016 | 70.V.16-SQUARE DRIVE UNIT 3/4"-3/4" | 1 | |
| 59011012 | SQUARE DRIVE UNIT FOR TORQUE WRENCHES | 1 | |
| 5945-1153 | SOCKET-2-3/4" x 1" SQUARE DRIVE 6 POINT | 1 | |
| 5945-3001 | SOCKET-3-1/8" x 1" SQUARE DRIVE 6 POINT | 1 | |
| 5NSQA | SQUARE FILE | 1 | |
| 5NSQB | NEEDLE FILE,SQUARE | 1 | |
| 5NTSB | 3 SQUARE FIL | 1 | |
| 5NTSC | NEEDLE FILE-THREE SQUARE | 1 | |
| 6004MFRMH | Micro-Adjustable Click Type Torque Wrenches (Square drive: 3/8") (Torque range: 150-1000 in.-lbs.) (Increments: 5) (Add to cart: Add To Cart) (Square drive: 1") (Torque range: 200-1000 ft. lbs.) (Increments: 5) (Add to cart: Add To Cart) (Square drive: 1/ | 4 | |
| 6169NMF | STANLEY DIAL TORQUE WRENCH, 0 → 10NM, 1/4 IN DRIVE, SQUARE DRIVE | 1 | |
| 64003-7670 | Square “DIN” style dies for 8 AWG | 1 | |
| 64003-7770 | Square “DIN” style dies for 6 AWG | 1 | |
| 64003-7870 | Square “DIN” style dies for 4 AWG | 1 | |
| 64003-7970 | Square “DIN” style dies for 2 AWG | 1 | |
| 64008-0170 | Square DIN style die sets used with Metric 6mm² (10 AWG) compression lug. | 1 | |
| 64008-0270 | Square DIN style die sets used with Metric 10mm² (8 AWG) compression lug | 1 | |
| 64008-0370 | Square DIN style die sets used with Metric 16mm² (6 AWG) compression lug | 1 | |
| 64008-0470 | Square DIN style die sets used with Metric 25mm² (4 AWG) compression lug | 1 | |
| 64008-0570 | Square DIN style die sets used with Metric 35mm² (2AWG) compression lugs | 1 | |
| 64008-0670 | Square DIN style die sets used with Metric 50mm² (1AWG) compression lugs | 1 | |
| 64008-0770 | Square DIN style die sets used with Metric 70mm² (2/0 AWG) compression lugs | 1 | |
| 64008-0870 | Square DIN style die sets used with Metric 95mm² (3/0 AWG) compression lug. | 1 | |
| 64008-0970 | Square DIN style die sets used with 4/0 compression lugs | 1 | |
| 64008-1070 | Square DIN style die sets used with 300 MCM compression lugs | 1 | |
| 64008-1170 | Square DIN style die sets used with 4/0 (14mm wide) compression lugs | 1 | |
| 64008-1270 | Square DIN style die sets used with 300 MCM (14 mm wide) compression lugs | 1 | |
| 64530-10 | SLEEVE, TAPERED, CONNECTING ROD PARALLELISM AND SQUARENESS GAGE. ADQUIRIR | 1 | |
| 64530-9 | SLEEVE, TAPERED, CONNECTING ROD PARALLELISM AND SQUARENESS GAGE. ADQUIRIR | 1 | |
| 668 | KIT ASSY JASCO 6 SPLINE SQUARE BASE SUIT 6555 + 7555 | 2 | |
| 6956 | 1/4″ SQUARE DRIVE SPINNER HANDLE 150 MM | 2 | |
| 64530 | GAGE, CONNECTING ROD PARALLELISM AND SQUARENESS | 1 | |
| 6C227 | RAFTER SQUARE | 1 | |
| 6SD600 | TORQUE WRENCH FIXED SQUARE DRIVE. RANGE 10"LBS - 600 FT.LBVS (STURTEVANT) | 1 | |
| 6T | FILE THREE SQUARE (6") | 2 | |
| 718322 | WASHER, SQUARE | 4 | |
| 735310 | ADAPTOR TO INSTALL TEST SQUARE BRACKET | 1 | |
| 72063101 | THREE SQUARE ENGINEERS SCRAPER 215MM | 1 | |
| 7000121587 | 3M 021200-50009 Scotch-Weld EPX Square Gold 37 mL & 50 mL Mixing Nozzle | 1 | |
| 7000123863 | 3M 063806-01003 Scotch-Weld EPX Plus II Square Green 48.550mL Mixing Nozzle | 1 | |
| 7100104991 | 3M 076308-86434 Scotch-Weld EPX Green Square 48.5 mL & 50 mL (11 21) Mixing Nozzle | 2 | |
| 7229A42 | BIT ADAPTER FOR RATCHET WRENCHES WITH RING, 1/4" SQUARE DRIVE SIZE, FOR 1/4" BIT HEX SHANK | 1 | |
| 7229A44 | BIT ADAPTER FOR RATCHET WRENCHES WITH RING, 3/8" SQUARE DRIVE SIZE, FOR 1/4" BIT HEX SHANK | 1 | |
| 730N/40 | WRENCH TORQUE STEEL SINGLE END 14X18MM; M END DRIVE W/SQUARE LOCATION FOR ADAPTER; NSN 5120123699145 | 2 | |
| 734K/5 3/8 | SQUARE BIT 58243005 | 1 | |
| 735-936 | BAHCO 1/2 IN SQUARE HANDLE | 1 | |
| 7409H | 3/8" SQUARE DRIVE BIT HOLDER | 1 | |
| 7502MRMH | Micro-Adjustable Click Type Torque Wrenches (Square drive: 3/8") (Torque range: 150-1000 in.-lbs.) (Increments: 5) (Add to cart: Add To Cart) (Square drive: 1") (Torque range: 200-1000 ft. lbs.) (Increments: 5) (Add to cart: Add To Cart) (Square drive: 1/ | 3 | |
| 752MFRMH | Micro-Adjustable Click Type Torque Wrenches (Square drive: 3/8") (Torque range: 150-1000 in.-lbs.) (Increments: 5) (Add to cart: Add To Cart) (Square drive: 1") (Torque range: 200-1000 ft. lbs.) (Increments: 5) (Add to cart: Add To Cart) (Square drive: 1/ | 2 | |
| 7752 | 3/8" SQUARE DRIVE SPEEDERS WITH ROTARY HANDLE | 4 | |
| 7789 | 1/2" FEMALE SQUARE 3/4" MALE SQUARE | 1 | |
| 77593000 | 10757-2K - NEW-SQUARE BLADE AWL - NEW | 1 | |
| 7789-2 | STAHLWILLE ADAPTER SQUARES | 1 | |
| 7789-3 | STAHLWILLE ADAPTER SQUARES | 1 | |
| 7789-4 | STAHLWILLE ADAPTER SQUARES | 1 | |
| 7789-5 | STAHLWILLE ADAPTER SQUARES | 1 | |
| 8-4014A | 111 SQUARE RING | 1 | |
| 8-4114A | 207 SQUARE RING | 1 | |
| 8-755-01 | ELDEC GO-GAUGE SQUARELY | 1 | |
| 838 | APEX 838 1/4'' HEX INSERT BIT HOLDER, 3/8'' SQUARE DRIVE | 1 | |
| 8035.2 | SQUARE LUG | 1 | |
| 8965 | DECREASING ADAPTOR FOR ¾ SQUARE DRIVE AND ½ SOCKETS MLG/NLG | 1 | |
| 94556 | PAD, SQUARE 1/4 -20 QUICK CHANGE EYELET | 1 | |
| 809114 | Adaptor 1/4 ' square drive ratchet | 1 | |
| 809115 | Adaptor 3/8 ' square drive ratchet | 1 | |
| 809117 | Adaptor 3/4 ' square drive ratchet | 1 | |
| 809506 | Adaptor 1/2 ' square drive ratchet | 1 | |
| 810525 | 100-700 LB-FT TORQUE WRENCH, MICROMETER ADJUSTABLE 3/4'' SQUARE DRIVE | 1 | |
| 810600 | TORQUE WRENCH FIXED SQUARE DRIVE. RANGE 10"LBS - 600 FT.LBVS (STURTEVANT) | 2 | |
| 819058 | STURTEVANT RICHMONT SD 3/8 | INTERCHANGEABLE HEAD SQUARE DRIVE, 1250 IN. LBS | 1 | |
| 819059 | STURTEVANT RICHMONT SD 1/2 | INTERCHANGEABLE HEAD SQUARE DRIVE, 2500 IN. LBS | 1 | |
| 79270011 | SD.10351.N-SQUARE CUTTING WIRE 50M | 1 | |
| 80350017 | 8035.1-SQUARE LUG 17X35MM | 1 | |
| 80350020 | 8035.2-SQUARE LUG | 1 | |
| 818.300CLO | PRECISION SQUARES | 1 | |
| 85555A413 | TORQUE WRENCH, ADJUSTABLE CLICK-STYLE W/ SOCKET RELEASE, 3/8" SQUARE DRIVE, 50-250 IN-LB | 1 | |
| 8637A41 | SQUARE DRIVE TRX PLUS BIT SOCKET | 1 | |
| 8900DZ-1 | 1 , DRIVE 3/4” SQUARE DRIVE SOCKETS WITH IMPERIAL BI-HEX PROFILE | 1 | |
| 8900DZ-1.13/16 | 13/16 , DRIVE 3/4” SQUARE DRIVE SOCKETS WITH IMPERIAL BI-HEX PROFILE | 1 | |
| 9045-B-250 | L SQUARE ANGLE RULER 90 DEGREE 25CM | 1 | |
| 90DEGREESQUARE | 90 DEGREE SQUARE | 1 | |
| 91146A120 | SQUARE BEVELED WASHER 12MM BOLT | 1 | |
| 916-107 | BEVELED EDGE SQUARE, DIN 875, 100X70 MM STAINLESS STEEL (MANUFACTURER MITUTOYO) | 1 | |
| 916-108 | BEVELED EDGE SQUARE, DIN 875, 150X100 MM STAINLESS STEEL (MANUFACTURER MITUTOYO) | 1 | |
| 92288A120 | METRIC KEY BAR STOCK 5mm SQUARE (12" LG) | 1 | |
| 9565K26 | TUBE FINISHING PLUG 1"1/2 SQUARE | 1 | |
| 956A7403 | FIXTURE - RESTRAIN-SQUARE HEAD BOLT STAGE 4 | 1 | |
| 956A8549 | FIXTURE - RESTRAIN - SQUARE HEAD BOLT | 1 | |
| 956A8553 | FIXTURE - RESTRAIN-SQUARE HEAD BOLT STAGE 2 | 1 | |
| 96035125 | SET OF SQUARE NOZZLES | 1 | |
| 98F49208240000 | ADAPTER - TORQUE (SQUARE DRIVE 1-2, HEX SIZE 9-16 IN) | 10 | |
| 98F49208240001 | ADAPTER - TORQUE (SQUARE DRIVE 3-8, HEX SIZE 7-16 IN) | 12 | |
| 98F49209001000 | ADAPTER - TORQUE (SQUARE DRIVE 3-8, HEX SIZE 7-16 IN) | 5 | |
| 98L24209005000 | ADAPTER - TORQUE (SQUARE DRIVE 3-8, HEX SIZE 7-16 IN) | 1 | |
| 98L52108529052 | BACK SQUARE | 1 | |
| 98S57605002116 | SQUARE SUPPORT | 1 | |
| 994202 | 3/8 ROUND DOUBLE-SQUARE ADAPTER | 1 | |
| 994204 | 3/8 ROUND DOUBLE-SQUARE ADAPTER | 1 | |
| A27092-139 | ACTUATORS/DEACTUATORS SET - PROXIMITY SENSOR WRENCH - SPEED, 3/8 INCH SQUARE DRIVE | 12 | |
| A27124-28 | Square Jack | 1 | |
| A2A | 3/8 DRIVE SQUARE 1/2 DRIVE ADAPTOR | 4 | |
| A51006-28 | SQUARE BEAM | 1 | |
| A71015-12 | SQUARE TUBE | 1 | |
| A78019-10 | Square Tube | 1 | |
| A78019-11 | Square Tube | 1 | |
| A78019-13 | Square Tube | 1 | |
| A78019-14 | Square Tube | 1 | |
| A78019-8 | Square Tube | 1 | |
| A78026 | ADAPTER - SQUARE DRIVE | 1 | |
| A78026-1 | TORQUE WRENCH SQUARE ADAPTER | 1 | |
| ACRATORK MODEL MINOR MKIII | TORQUE SPANNER 0.26 INCH SQUARE DRIVE | 1 | |
| AFNDT-2009AL | 5 STEP WEDGE, 16mm, 17mm, 18mm, 19mm, 20mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2090AL | 5 STEP WEDGE, 11mm, 12mm, 13mm, 14mm, 15mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2100TI | 6 STEP WEDGE TITANIUM, 1MM, 2MM, 4MM, 6MM, 8MM, 10MM, 6AL-4V, 1.0" x 1.0" SQUARES, AMS 4928. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2119AL | 5 STEP WEDGE, 11mm, 12mm, 13mm, 14mm, 15mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013/2024 | 5 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 2024 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013/304 | 5 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 304 Stainless Steel. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013/4340 | 5 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 4340 Cres Steel. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013/7075 | 5 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 7075 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013/INC | 5 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 718 Inconel. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013/TI | 5 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 6AL-4V Titanium. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013AL | 6 STEP WEDGE, 0.5mm,1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013AL-1 | Metric 6 Step Wedge, 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 2024-T3 Aluminum Supplied with Delrin Holding Block. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013CS | 6 STEP WEDGE, 0.5mm 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 4340 Carbon Steel. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013TI | 5 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 6AL-4V Titanium. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3014AL | 8 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3014CS | 8 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 4340 Carbon Steel. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3014SS | 8 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 304 Stainless Steel. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3014TI | 8 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 6AL-4V Titanium. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3031 | 4 STEP WEDGE 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: Magnesium RZ5. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3163CS | 8 STEP WEDGE, STEP SIZES: 0.35mm 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm +/- .02mm. Material: 1018 Carbon Steel. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3228AL-1 | 8 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3228AL-2 | 8 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3232F | Custom Hole Standard 2.0" x 2.0" x .25" Square. Material: Forged Aluminum. Hole Size: 16.5mm. EDM Corner Notch: .05mm x .05mm x .1mm Wide +/- 0.05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3243AL | 8 STEP WEDGE, 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3244AL | 8 STEP WEDGE, 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3245AL | 8 STEP WEDGE, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3246AL | 8 STEP WEDGE, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3253AL | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Confo | 1 | |
| AFNDT-3253CS | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 4340 or 4130 Carbon Steel. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate | 1 | |
| AFNDT-3253TI | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 6Al-4v Titanium. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Confor | 1 | |
| AFNDT-3313TI | 5 STEP WEDGE, 1mm, 1.5mm, 2mm, 3mm, 4mm, +/- .05mm. Material: 6AL-4V Titanium. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3317/7075 | 6 STEP WEDGE, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm +/- .05mm. Material: 7075 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3354/2024-T3 | METRIC 5 STEP WEDGE, 5mm, 10mm, 15mm, 20mm, 25mm, +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 20mm x 20mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3354/7075-T6 | METRIC 5 STEP WEDGE, 5mm, 10mm, 15mm, 20mm, 25mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3409AL | 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3409ST | 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 4340 Steel. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3409TI | 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 6AL-4V Titanium. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/2024T3 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 2024-T3 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/2024T42 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 2024-T42 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/304SS | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 304 nStainless Steel. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/7075T6 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/TI | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 6AL-4V Titanium. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/2024T3 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 2024-T3 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/2024T42 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 2024-T42 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/304SS | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 304 Stainless Steel. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/7075T6 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/TI | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 6AL-4V Titanium. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3433/7075T6 | 5 STEP WEDGE, 10mm, 20mm, 30mm, 40mm, 50mm, +/- .05mm. Material: 7075 Aluminum. Pad Size: 25mm x 25mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3445AL | METRIC 5 STEP WEDGE, 10mm, 15mm, 20mm, 25mm, 30mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 25mm x 25mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3491AL | METRIC 6 STEP WEDGE. STEP SIZE: 0.6mm, 1mm, 3mm, 7mm, 13mm, 20mm +/- .03mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3492AL | METRIC 5 STEP WEDGE: STEP SIZE: 2mm, 5mm, 10mm, 15mm, 20mm +/- .03mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3521AL | 5 STEP METRIC WEDGE , 2mm, 4mm, 6mm, 8mm, 10mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square Supplied with Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3530TI | METRIC 5 STEP WEDGE, 1mm, 3mm, 7mm, 12mm, 15mm +/- .05mm. Material: 6Al-4v Titanium. Pad Size: 25mm x 25mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3532 | 6 STEP WEDGE, .045", .005", .015", .025", .035", .045" ± .001". Material: 6061-T6 Aluminum. Pad Size: 1.0" x 1.0" square with .500" Steps on the ends. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3533 | 6 STEP WEDGE, .045", .010", .020", .030", .040", .045" ± .001". Material: 6061-T6 Aluminum. Pad Size: 1.0" x 1.0" square with .500" Steps on the ends. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3548/7075 | 5 STEP WEDGE, 1mm, 3mm, 5mm, 7mm, 10mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square supplied with Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3669-1043 | BOEING COUNTERSINK REFERENCE STANDARD 737 PT6 51-00-00 PROCEDURE 19, 0.375” DIAMETER 100° COUNTERSINK HOLE. MATERIAL: 43404340M STEEL. SIZE: 2.0" X .375" THICK( ROUNDSQUARE. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AFS-0524 | 5 MHz shear wave transducer .25" x .25" square element. 1.025 radius top mount connector. used with NDT3238 ref. standard | 1 | |
| AFS-1159 | Panametrics / Olympus NDT Integral Angle Beam Transducer, 45° 5 MHz, .187" square element. .433"x.433"x.236" Stainless Steel case. Includes Test Report ancd Certificate of Conformance. | 1 | |
| AFS-1384 | 5MHZ, 2 x .25" SQUARE ELEMENT PAINTBRUSH TRANSDUCER USED WITH NDT3023, 737 PART 4 32-10-03 PAGE 7 FIGURE 3. Includes Test Report and Certificate of Conformance. | 1 | |
| AGE16194-6 | E-STOP, SQUARE-D | 1 | |
| AGE16194-9 | LOCKOUT, SQUARE-D | 1 | |
| AL-16 | SQUARE TOOL BITS ,STYLE AL CI° LEAD ANGLE ,TURNING TOOL PREMIUM CARBIDE TIPPED FOR TURNING TO A SQUARE SHOULDER. TOOL NO. AL-16 (LEFT HAND) ,W X H(SHANK SIZE) X L (1X1X7), NOSE RAD. 1/32 ,GRADE 370E =C5 EDP NO. 70245, LIST NO, 4110 .MORSE CUTTING TOOL | 1 | |
| AN8514-1 | WRENCH 3/8 INCH SQUARE DRIVE | 4 | |
| AN8515-1 | WRENCH – 1/2” SQUARE DRIVE ADJUSTABLE SPANNER SET (1.75 TO 4 INCH DIA.) | 2 | |
| ATECHMS80MK | ELEC SCRWDRIVER 1/4 SQUARE KIT | 1 | |
| ATHR250 | HI-LOK & HI-LITE HAND RATCHET WRENCH, REVERSIBLE 1/4'' MALE SQUARE DRIVE WITH THROUGH HOLE FOR HEX KEY, REPLACES HI-SHEAR HLH101-21 OR HLH 101-250 | 2 | |
| ATI3595 | RATCHET-SQUARE DRIVE 3/8" | 1 | |
| ATI3596-38 | ATI Tools ATI3596-.38 Hi-Lok Socket 14 Square Drive - 38 Hex | 3 | |
| ATI3597-.38 | HI-LOK-R SOCKET - 3/8IN SQUARE | 1 | |
| ATI3597-.50 | HI-LOK-R SOCKET - 3/8IN SQUARE | 1 | |
| ATI437C-1 | CARBIDE DEBUR BLADE-SQUARE | 1 | |
| ATI540 | ATI Tools ATI540 9 x 38 Square Drive Screw Removal Tool | 4 | |
| ATIFY936 | HI-LOK 1/4 SQUARE D" | 1 | |
| ATIGRO31.351 | FILE 6IN NO1 CUT SQUARE SWISS | 1 | |
| ATIGRO31.377 | FILES THREE SQUARE 8 CUT 0 | 1 | |
| ATIHTS-2 | #2 HI-TORQUE® BIT - 1/4" SQUARE DRIVE | 1 | |
| B55003-18 | 3/4INCH SQUARE DRIVE RETAINING NUT WRENCH | 1 | |
| B55003-24 | 1/2INCH SQUARE DRIVE RETAINING NUT WRENCH | 1 | |
| BAT-MDS4 | 4" Miniature Double Square | 1 | |
| BAT-MSQ6 | 6" Machinist Square | 1 | |
| BF617B | HAMMER, SHRINKING, SQUARE FACE | 1 | |
| BH007 | Starrett 8H LARGE COMBINATION SQUARE | 1 | |
| BH100 | Starrett 10MH-150 COMB SQUARE METRIC | 1 | |
| BH105 | Starrett 10MEH-150 COMB SQUARE MET/ENG | 1 | |
| BH110 | Starrett 10H-6-4R COMB SQUARE | 1 | |
| BH168 | Starrett 11H-4-4R COMB SQUARE | 1 | |
| BH169 | Starrett C11H-4-4R COMB SQUARE | 1 | |
| BH177 | Starrett 11H-6-4R COMB SQUARE | 1 | |
| BH179 | Starrett C11H-6-4R COMB SQUARE | 1 | |
| BH197 | Starrett C11H-6-16R COMB SQUARE | 1 | |
| BH202 | Starrett 11H-12-4R COMB SQUARE | 1 | |
| BH222 | Starrett C11H-12-4R COMB SQUARE | 1 | |
| BH242 | Starrett 11H-18-4R COMB SQUARE | 1 | |
| BH322 | Starrett 11MH-150 COMB SQUARE | 1 | |
| BH327 | Starrett C11MH-150 COMB SQUARE | 1 | |
| BH342 | Starrett 11MH-300 COMB SQUARE | 1 | |
| BH352 | Starrett 11MEH-300 COMB SQUARE | 1 | |
| BH362 | Starrett C11MH-300 COMB SQUARE | 1 | |
| BH382 | Starrett 11MH-600 COMB SQUARE | 1 | |
| BH402 | Starrett C11MH-600 COMB SQUARE | 1 | |
| BH405 | Starrett C11MEH-600 COMB SQUARE | 7 | |
| BH427 | Starrett H11-6 SQUARE HEAD ONLY | 1 | |
| BH432 | Starrett H11-1224 SQUARE HEAD ONLY | 1 | |
| BH967 | Starrett 13A SQUARE | 1 | |
| BH977 | Starrett 13C SQUARE | 1 | |
| BH997 | Starrett 13MA SQUARE | 1 | |
| BI007 | Starrett 13MC SQUARE | 1 | |
| BI222 | Starrett 14A SQUARE | 1 | |
| BI227 | Starrett 14D SQUARE | 1 | |
| BI232 | Starrett 14MA SQUARE | 1 | |
| BI237 | Starrett 14MD SQUARE | 1 | |
| BI687 | Starrett 20-3 SQUARE | 1 | |
| BI697 | Starrett 20-4 1/2 SQUARE | 1 | |
| BI707 | Starrett 20-6 SQUARE | 1 | |
| BI717 | Starrett 20-12 SQUARE | 1 | |
| BI737 | Starrett 20-24 SQUARE | 1 | |
| BI747 | Starrett 20-36 SQUARE | 1 | |
| BI857 | Starrett 21 THIN STEEL TRY SQUARE | 1 | |
| BIT-1/4-ADPT-TOOL | 1/4 DRIVE X 1/4 SQUARE TOOL | 1 | |
| BK089 | Starrett C33H-4-4R COMB SQUARE | 1 | |
| BK112 | Starrett 33H-12-4R COMB SQUARE | 1 | |
| BK122 | Starrett C33H-12-4R COMB SQUARE | 1 | |
| BK132 | Starrett C33H-12-16R COMB SQUARE | 1 | |
| BK137 | Starrett C33H-18-4R COMB SQUARE | 1 | |
| BK237 | Starrett C33MH-150 COMB SQUARE | 1 | |
| BK247 | Starrett 33MH-300 COMB SQUARE | 1 | |
| BK256 | Starrett 33MEH-300 COMB SQUARE | 1 | |
| BK2565 | Starrett C33MEH-300 COMB SQUARE | 1 | |
| BK257 | Starrett C33MH-300 COMB SQUARE | 1 | |
| BK317 | Starrett C33MEH-600 COMB SQUARE | 1 | |
| BK327 | Starrett H33-4 SQUARE HEAD ONLY | 1 | |
| BK332 | Starrett H33-6 SQUARE HEAD ONLY | 1 | |
| BK337 | Starrett H33-1224 SQUARE HEAD ONLY | 1 | |
| BK357 | Starrett 33JH-6-4R COMB SQUARE | 1 | |
| BK372 | Starrett 33JH-6-16R COMB SQUARE | 1 | |
| BL627 | Starrett 55-3 SQUARE | 1 | |
| BL637 | Starrett 55-6 SQUARE | 1 | |
| BLP73BIT-7 | HEX BIT 25MM SQ1 SQUARE | 1 | |
| BLP73BIT-8 | HEX BIT 25MM SQ2 SQUARE | 1 | |
| BLP73BIT-9 | HEX BIT 25MM SQ3 SQUARE | 1 | |
| BLPAFM1438 | 1/4" DRIVE SQUARE DRIVE ADAPTOR | 2 | |
| BLPAFM3814 | SQUARE DRIVER ADAPTOR 3/8-1/4 | 2 | |
| BLPSQB1 | BIT,SQUARE NO.1 | 1 | |
| BLPSQB2 | BIT,SQUARE NO.2 | 1 | |
| BM1400 | Starrett 60B-50 PRECISION SQUARE | 1 | |
| BM1402 | Starrett 60B-75 PRECISION SQUARE | 1 | |
| BM1404 | Starrett 60B-100 PRECISION SQUARE | 1 | |
| BM1406 | Starrett 60B-150 PRECISION SQUARE | 1 | |
| BM1408 | Starrett 60B-200 PRECISION SQUARE | 1 | |
| BM1450 | Starrett 60F-75 PRECISION SQUARE | 1 | |
| BM1452 | Starrett 60F-100 PRECISION SQUARE | 1 | |
| BM1454 | Starrett 60F-150 PRECISION SQUARE | 1 | |
| BM1456 | Starrett 60F-200 PRECISION SQUARE | 1 | |
| BM232 | Starrett 61 6IN SQUARE | 1 | |
| BP3403NMRPHZ | BLUE POINT TORQUE WENCH / 60-340NM (44.2 - 250IBF/FT)/ SQUARE DRIVE: 1/2" | 1 | |
| BRA6PS175SQD | PRESSURE SWITCH SQUARE D | 1 | |
| BRAKE PEDAL SQUARE | BRAKE PEDAL SQUARE | 1 | |
| BT-HT-100 | T-Handle Wrench - 1/4" Square Drive | 2 | |
| BT-HT-107 | T-Handle Wrench - 3/8" Square Drive | 2 | |
| BTA-8001-23 | A321 BRAKE CONTAINER SQUARE QUBETAINER | 1 | |
| BW 1/4 ST BLK | BEVELED SQUARE WASHER 1/4 (THIK7/32-5/16) | 1 | |
| C12051T-19-1562 | SQUARE SLEEVE #5/32 | 1 | |
| C12051T-19-1850 | SQUARE SLEEVE #13 | 1 | |
| C12051T-49-0980ST | SMALL SQUARE SLEEVE #40 | 1 | |
| C24004-16 | SQUARE TUBE | 1 | |
| C27049-33 | SQUARE TUBE | 1 | |
| C27057-7 | SQUARE TUBE | 1 | |
| C32038-53 | SQUARE DRIVE SLEEVE | 1 | |
| C32038-54 | SQUARE DRIVE SLEEVE | 1 | |
| CAAA1210 | 3/8" SQUARE DRIVE EXTENSION BAR, LENGTH 10" | 1 | |
| CAAF0802 | 1/4" SQUARE DRIVE EXTENSION BAR, LENGTH 2" | 1 | |
| CAAF0806 | 1/4" SQUARE DRIVE EXTENSION BAR, LENGTH 6" | 1 | |
| CAAF1206 | 3/8" SQUARE DRIVE EXTENSION BAR, LENGTH 6" | 1 | |
| CCM150I | WRENCH,TORQUE;?M;30.0 INCH-POUNDS MIN AND 150.0 INCH-POUNDS MAX;AUDIBLE AND FEEL IMPULSE;SINGLE END EXTERNAL DOVETAIL; STEEL;?M END DRIVE,W/SQUARE LOCATION FOR ADAPTER,TORQUE WRENCH;|9.000";2.00 INCH-POUNDS;PLAIN HEAD;RUBBER GRIP HANDLE; CH | 1 | |
| CK457 | Starrett 289A ATTACHMENT (COMB SQUARE) | 1 | |
| CK462 | Starrett 289B ATTACHMENT (COMB SQUARE) | 1 | |
| CM-S-837 | PLUG SET - ADAPTOR, CONNECTOR PLUG (MIL-C-83723 SERIES III, SIZE FROM 8 TO 28, DRIVE 1/4 - 3/8 SQUARE) | 3 | |
| CMMT12016 | SQUARE SPLINED SOCKET SET | 1 | |
| CNT3S502 | 12IN MACHINIST SQUARE | 1 | |
| COTS | SQUARE METAL GROUND PLATE 1 M (39.37 IN) BY 1 M (39.37 IN) WITH A MALE 50 Ω TNC SOCKET IN ITS CENTER (ELTA) | 1 | |
| CP828 | Chicago Pneumatic® Ratchet Wrenches (Tube outer diameter: 10-50 ft-lbs) (Rpm: 150) (Overall length: 10" (254 mm)) (Square drive: 3/8") (Add to cart: Add To Cart) | 1 | |
| CP828H | Chicago Pneumatic® Ratchet Wrenches (Tube outer diameter: 10-50 ft-lbs) (Rpm: 150) (Overall length: 10" (254 mm)) (Square drive: 3/8") (Add to cart: Add To Cart) (Tube outer diameter: 10-50 ft-lbs) (Rpm: 150) (Overall length: 10" (254 mm)) (Square drive: | 1 | |
| CSSH | Moore & Wright Square Head For CSM Combination Set | 1 | |
| CT8810A | IMPACT WRENCH CORDLESS; 3/8'' SQUARE DRIVE SNAP ON | 1 | |
| CW242 | Starrett 453C DIE MAKERS SQUARE | 1 | |
| CW247 | Starrett 453EZ DIE MAKERS SQUARE | 1 | |
| CW252 | Starrett 453MA DIE MAKERS SQUARE | 1 | |
| CW277 | Starrett 453ME DIE MAKERS SQUARE | 1 | |
| CW279 | Starrett 453MEZ DIE MAKERS SQUARE | 1 | |
| CW787 | Starrett 457A DIE MAKERS SQUARE | 1 | |
| CW792 | Starrett 457C DIE MAKERS SQUARE | 1 | |
| DB175F-4AS | DIAL INDICATING TORQUE WRENCH, 0-175, 2LBF.FT, 1/2" SQUARE DRIVE | 1 | |
| DB300I-3AS | TORQUE WRENCH DIAL INDICATOR 0-300 5LBF.IN, 3/8" SQUARE DRIVE | 1 | |
| DB600I-4AS | TORQUE WRENCH DIAL INDICATOR 0-600 10LBF IN. 1/2" SQUARE DRIVE | 1 | |
| DC150 | CHUCK KIT SQUARE DRIVE ATTACH | 1 | |
| DC15014 | 1/4IN DRILL CHUCK 1/4IN SQUARE | 1 | |
| DC15038 | 3/8IN DRILL CHUCK 3/8IN SQUARE | 1 | |
| DCD785 | IMPACT WRENCH (1 / 2 SQUARE HEAD) | 1 | |
| DCF813 | IMPACT WRENCH (3 / 8 SQUARE HEAD) | 1 | |
| DCF922D2 | CORDLESS BRUSHLESS 1/2" SQUARE DRIVE IMPACT WRENCH 20V XR LI-ION SET | 1 | |
| DCT4-106 | Commercial Crimp Tool - .042" Square / .128" Hex / .178" Hex | 2 | |
| DET HE CP | HLD | AVF 2014 (SQUARESPACE.COM) | 1 | |
| DET HE WK | HWK 2014 (SQUARESPACE.COM) | 1 | |
| DF550 | Starrett 649-1M SPINDLE SQUARE | 1 | |
| DM632 | Starrett 800A SQUARE HEAD NAIL SET | 1 | |
| DM637 | Starrett 800B SQUARE HEAD NAIL SET | 1 | |
| DM642 | Starrett 800C SQUARE HEAD NAIL SET | 1 | |
| DM647 | Starrett 800D SQUARE HEAD NAIL SET | 1 | |
| DM652 | Starrett 800E SQUARE HEAD NAIL SET | 1 | |
| DR9350 | Starrett S3020Z SQUARE SET | 1 | |
| DR93555 | Starrett 3020-3 PRECISION SQUARE | 1 | |
| DR93556 | Starrett 3020-4 PRECISION SQUARE | 1 | |
| DR93557 | Starrett 3020-6 PRECISION SQUARE | 1 | |
| DR93560 | Starrett 3020-12 PRECISION SQUARE | 1 | |
| DR93580 | Starrett 3020M-75 PRECISION SQUARE | 1 | |
| DR93581 | Starrett 3020M-100 PRECISION SQUARE | 1 | |
| DR93582 | Starrett 3020M-150 PRECISION SQUARE | 1 | |
| DR93583 | Starrett 3020M-300 PRECISION SQUARE | 1 | |
| DR93590 | Starrett S3020MZ PRECISION SQUARE SET | 1 | |
| DS71041 | Moore & Wright 100mm Sliding "T" Square | 1 | |
| DS71044 | Moore & Wright 4"/100mm Sliding "T" Square | 1 | |
| DS71051 | Moore & Wright 150mm Sliding "T" Square | 1 | |
| DS71056 | Moore & Wright 6"/150mm Sliding "T" Square | 1 | |
| E70 | T-BAR - 1/2 IN. SQUARE DRIVE | 2 | |
| ENGINEERS SQUARE | ENGINEERS SQUARE | 1 | |
| ETBB03 | TUNGSTEN BUCKING BAR SQUARE | 1 | |
| EX-250 | Apex® Bit Extensions (Description: 1/4" Male Square) (Lock type: Pin) (Overall length: 1-3/8") (Add to cart: Add To Cart) | 1 | |
| EX-250-2 | Apex® Bit Extensions (Description: 1/4" Male Square) (Lock type: Pin) (Overall length: 1-3/8") (Add to cart: Add To Cart) (Description: 1/4" Male Square) (Lock type: Pin) (Overall length: 2") (Add to cart: Add To Cart) | 1 | |
| EX-250-B | Apex® Bit Extensions (Description: 1/4" Male Square) (Lock type: Pin) (Overall length: 1-3/8") (Add to cart: Add To Cart) (Description: 1/4" Male Square) (Lock type: Pin) (Overall length: 2") (Add to cart: Add To Cart) (Description: 1/4" Male Square) (Loc | 1 | |
| EX-370 | Apex® Bit Extensions (Description: 1/4" Male Square) (Lock type: Pin) (Overall length: 1-3/8") (Add to cart: Add To Cart) (Description: 1/4" Male Square) (Lock type: Pin) (Overall length: 2") (Add to cart: Add To Cart) (Description: 1/4" Male Square) (Loc | 1 | |
| EX-370-2 | Apex® Bit Extensions (Description: 1/4" Male Square) (Lock type: Pin) (Overall length: 1-3/8") (Add to cart: Add To Cart) (Description: 1/4" Male Square) (Lock type: Pin) (Overall length: 2") (Add to cart: Add To Cart) (Description: 1/4" Male Square) (Loc | 1 | |
| EX-370-B | Apex® Bit Extensions (Description: 1/4" Male Square) (Lock type: Pin) (Overall length: 1-3/8") (Add to cart: Add To Cart) (Description: 1/4" Male Square) (Lock type: Pin) (Overall length: 2") (Add to cart: Add To Cart) (Description: 1/4" Male Square) (Loc | 1 | |
| EX250-B/G | ADAPTER, 1/4" HEX TO 1/4" SQUARE DRIVE | 1 | |
| F4LB | 3/8 SQUARE HEAD CRANK | 6 | |
| F80 | 3/8" SQUARE HEAD RACHET | 3 | |
| F80168-1 | SOCKET - HEX, 2 5/8 INCH 6 POINT, 3/4 INCH SQUARE DRIVE (SPX OTC DIVISION) | 31 | |
| FAIES9 | ENGINEERS SQUARE 9"/225MM | 1 | |
| FAIESSET4 | ENGINEERS SQUARES SET, 4 PIECE (50, 75, 100, 150MM) | 1 | |
| FBPT-ULC-A6S | FBPT-ULC-A6S;Tip LC/PC and LC/APC Bulkhead Square Angled 60 Degrees | 1 | |
| FC36A | 3/8" SQUARE HEAD OPEN ENDED SPANNER | 5 | |
| FFL52378006 | 6 IN SQUARE 2 PC COMBO | 1 | |
| FFL52392018 | 18IN 2 PC COMBO SQUARE | 1 | |
| FFL52432246 | L SQUARE 4PC SET | 1 | |
| FNLWC5R5 | SQUARE DRIVE KEYLESS IMPACT CH | 1 | |
| FRDH141 | ADAPTER TORQUE - SQUARE DRIVE | 12 | |
| FSDR1 | 3/8" EXTERNAL DRIVE/ 1/4" INTERNAL SQUARE DRIVE FINGER RATCHET | 1 | |
| FTSM4E | 4MM TRIPLE SQUARE BIT SOCKET | 1 | |
| FTSM4E2 | 4MM TRIPLE SQUARE BIT | 1 | |
| FTSM5E | 5MM TRIPLE SQUARE BIT SOCKET | 1 | |
| FTSM5E2 | 5MM TRIPLE SQUARE BIT | 1 | |
| FXK3 | 3/8"" SQUARE HEAD EXTENSION ROD | 4 | |
| GFAT1E | 1/4" DRIVE SQUARE DRIVE ADAPTOR | 4 | |
| GFATIE | 1/4" DRIVE SQUARE DRIVE ADAPTOR | 1 | |
| GLA12B | 1/2" DRIVE SQUARE DRIVE ADAPTOR | 5 | |
| GLAS1F | 3/4" DRIVE SQUARE DRIVE ADAPTOR | 4 | |
| GLAS1F2 | REPLACEMENT ADAPTER (1/2"SQUARE BIT) | 1 | |
| GLASIE | SQUARE ADAPTOR | 1 | |
| GMB3041 | Adaptor, Power, Hex-To-Square, Friction Ball, 2" long | 2 | |
| GMB3042 | HEX TO SQUARE ADAPTORS | 2 | |
| GMIHB015015-1Z-2 | SQUARE BLANKET | 1 | |
| GMIHB020020-1Z-2 | SQUARE BLANKET | 1 | |
| GMIHB030030-1Z-2 | SQUARE BLANKET | 1 | |
| GMIHB030030-1Z-2-G | SQUARE BLANKET FOR GMIOTHE9701 | 1 | |
| GMIHB040040-1Z-2 | SQUARE BLANKET | 1 | |
| GMIHB040040-1Z-2-G | SQUARE BLANKET FOR GMIOTHE9701 | 1 | |
| GMIHB060060-1Z-2 | SQUARE BLANKET | 1 | |
| GMIHB081081-2Z-2 | SQUARE BLANKET | 1 | |
| GMIHB081081-2Z-2-G | SQUARE BLANKET FOR GMIOTHE9701 | 1 | |
| GS-18020 | COMBINATION SQUARE. 24 INCHES LENGTH, 0.01 GRADUATICM. | 1 | |
| GS-18037 | SCALING HAMMER. 1/2 INCH SQUARE SOCKET | 1 | |
| GS14875-1 | INDICATOR BEARING SQUARENESS | 2 | |
| GS21111-1 | BRG Squareness Fixture | 1 | |
| GSAF1F | SQUARE DRIVE ADAPTORS ( SNAP ON ) | 4 | |
| GTA3 | SQUARE DRIVE ADAPTER 1/4@3/8 | 2 | |
| GTMA4.5ENP | 9/64 HEX BIT SKT 1/4 SQUARE DR | 1 | |
| Gedore-029040 | Gedore 029040 3/8'' FIXED SQUARE DRIVE | 1 | |
| Gedore-029060 | Gedore 029060 1/2'' FIXED SQUARE DRIVE | 1 | |
| Gedore-7672630 | Gedore 7672630 9x12 RECTANGULAR 1/4 FIXED HEAD SQUARE, Torque Wrench End Fittings | 1 | |
| Gedore-7679800 | Gedore 7679800 9x12 RECTANGULAR 3/8 FIXED HEAD SQUARE, Torque Wrench End Fittings | 1 | |
| Gedore-7687900 | Gedore 7687900 9x12 RECTANGULAR 1/2 FIXED HEAD SQUARE, Torque Wrench End Fittings | 1 | |
| Gedore-A36340 | Gedore A36340 1/4 TB SQUARE DRIVE, Torque Wrench End Fittings | 1 | |
| H250T1-6000-3 | SQUARE TUBE WELDMENT | 1 | |
| HGF4SQ | FILE, SQUARE | 1 | |
| HIW33 | SQUARE DRIVE | 1 | |
| HIW4A-2 | 3/4IN SQUARE DRIVE | 1 | |
| HK875/2 | 90 DEGREE SQUARE | 1 | |
| HP3325B | TOOL - SQUARESINEWAVE SIGNAL | 1 | |
| HT-7200 | 200-810NM 3/4" SQUARE DRIVE CLASSIC CLICK REVERSIBLE TORQUE WRENCH | 1 | |
| HT3202M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) | 1 | |
| HT3203M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 5 | |
| HT3205M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HT3206M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HT3406M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HT3407M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HT3408M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HT3409M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HT3410M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HT4403M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HT4404M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HTB10M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HTB2M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 2 | |
| HTB3M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 3 | |
| HTB4M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HTB5M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HTB6M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HTB7M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HTB8M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HTB9M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HTS-1 | HTS-1 APEX 1/4'' HI-TORQUE #1 SQUARE DRIVE INSERT BITS | 10 | |
| HTS-2 | Apex HTS-2 14 Hi-Torque #2 Square Drive Insert Bit | 12 | |
| HTS-3 | Apex HTS-3 14 Hi-Torque #3 Square Drive Insert Bit | 10 | |
| HTS-4 | HI-TORQUE SCREWDRIVER BIT 1/4 SQUARE DRIVE | 12 | |
| HVT7200 | 200-810NM 3/4" SQUARE DRIVE CLASSIC CLICK REVERSIBLE TORQUE WRENCH | 2 | |
| IM1083 | WRENCH - SOCKET, 3-3/8 INCH, 1 INCH SQUARE DRIVE SPL-5282 ( SNAP-ON) | 1 | |
| IM124B | SQUARE DRIVE ADAPTORS( SNAP ON ) | 1 | |
| IS38-22L 12PT WO | CEMENTEX INSULATED 3/8" SQUARE DRIVE 12 POINT 11/16" DEEP WALL SOCKET | 1 | |
| IS38-22L 12PTWO | CEMENTEX INSULATED 3/8" SQUARE DRIVE 12 POINT 11/16" DEEP WALL SOCKET | 1 | |
| IW100H-12 | SQUARE ANVIL | 1 | |
| IW100H-12-6 | SQUARE ANVIL 6IN EXTENDED | 1 | |
| IW150H-12 | SQUARE ANVIL | 1 | |
| IW38TB-52 | ANVIL 3/8IN SQUARE | 1 | |
| IW75-34 | ANVIL 3/4 SQUARE DRIVE | 1 | |
| IW75-46 | ANVIL 1 SQUARE DRIVE | 1 | |
| J.1/2 | 3/8" SQUARE SOCKET 12 | 2 | |
| J.11/16 | 3/8" SQUARE SOCKET 12 INCH PIECES | 2 | |
| J.13/16 | 3/8" SQUARE SOCKET 12 INCH PIECES | 2 | |
| J.3/4 | 3/8" SQUARE SOCKET 12 INCH PIECES | 2 | |
| J.3/8 | 3/8" SQUARE SOCKET 12 INCH PIECES | 2 | |
| J.5/16 | 3/8" SQUARE SOCKET 12 INCH PIECES | 3 | |
| J.5/8 | 3/8" SQUARE SOCKET 12 INCH PIECES | 2 | |
| J.7/16 | 3/8" SQUARE SOCKET 12 INCH PIECES | 2 | |
| J.9/16 | 3/8" SQUARE SOCKET 12 INCH PIECES | 2 | |
| J5100 | 9PC 3/8'' SQUARE DRIVE INCH 12PT RING SPANNER SET | 2 | |
| J52030-59 | SQUARE BEAM | 1 | |
| J52030-60 | SQUARE BEAM | 1 | |
| J6169NMF | STANLEY DIAL TORQUE WRENCH, 0 → 10NM, 1/4 IN DRIVE, SQUARE DRIVE | 3 | |
| J71002-61 | Square Drive Adapter | 1 | |
| J71002-81 | SQUARE DRIVE ADAPTER STORAGE BOX | 1 | |
| J71007-75 | Square drive adapter | 1 | |
| JHW7-6108 | WRENCH - SOCKET, 3-3/8 INCH, 1 INCH SQUARE DRIVE SPL-5282 ( SNAP-ON) | 1 | |
| JHW7-6108 ( SNAP-ON) | WRENCH - SOCKET, 3-3/8 INCH, 1 INCH SQUARE DRIVE SPL-5282 | 1 | |
| JHWTM-394RSD | REPL. SQUARE DRIVE FOR TM-394 | 1 | |
| JLV400 | COMBINATION SQUARE 12IN ZIN | 1 | |
| JLVCS1 | STEEL SQUARE | 1 | |
| JNT-S3 | Jus N Tyme JNT-S3 Red 3 Square Single Edge (3) Celcon Plastic Serrated Sealant Spreader | 1 | |
| K.230B1 | INTERCHANGEABLE 1/2" MALE SQUARE | 1 | |
| K120B | TOOL FACOM K.120B - 3/4'' SQUARE DRIVE SLIDING TEE HANDLE | 2 | |
| K24001-110 | Square Tube | 1 | |
| K52052-6 | SLIDING SQUARE | 1 | |
| KEY STOCK 3/16" | KEY STOCK 3/16" SQUARE ZINC PLATED | 1 | |
| L32 | EXTENSION,SOCKET WRENCH;BOTH ENDS 0.750";1ST END INTERNAL SQUARE#2ND END EXTERNAL SQUARE; STEEL;RIGID;|2.90" MIN AND 4.12" MAX;1.000" MAX;MANUAL TOOL;PLASTICS REMOVAL IN THE MARINE ENVIRONMENT (PRIME) PRODUCT; CHROMIUM;PROFESSIONAL/INDUSTRI | 4 | |
| L62 | EXTENSION,SOCKET WRENCH;BOTH ENDS 0.750";1ST END INTERNAL SQUARE#2ND END EXTERNAL SQUARE; STEEL;RIGID;|8.000";SECM;MANUAL TOOL;LOCK BUTT RETENTION; CHROMIUM; | 3 | |
| L8A-300 | HORIZONTAL STABILIZER COVERS, WINTER USE (specify round or square horiz.) (set of 2) | 1 | |
| L8A-305 | HORIZONTAL STABILIZER COVERS, ALL YEAR USE (specify round or square horiz.) (set of 2) | 1 | |
| L8A-410 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers), square tail, round horiz, WINTER USE | 1 | |
| L8A-415 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers), square tail, round horiz, ALL YEAR USE | 1 | |
| L8A-420 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers), square tail, square horiz, WINTER USE | 1 | |
| L8A-425 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers), square tail, square horiz, ALL YEAR USE | 1 | |
| LDH402 | SOCKET,SOCKET WRENCH;SINGLE END 1.250";SINGLE END 0.750";SINGLE END INTERNAL 12 POINT;SINGLE END INTERNAL SQUARE; STEEL;???BOX;|2.250";1.750";1.500";0.937"; | 3 | |
| LIL57670 | 10MM TRIPLE SQUARE BIT | 1 | |
| LIL71780 | SQUARE BLADE 1.4 X 25MM | 1 | |
| LS4116 | 4 Flute Carbide Square End Mill, 1/16 dia x 1/2" LOC x 2" OAL x 1/8 Shank | 1 | |
| LST36129 | SQUARE-CARPENTER | 1 | |
| LST50111 | DOUBLE SQUARE | 1 | |
| LST50225 | SQUARE HEADS | 1 | |
| LST50230 | 6IN SQUARE | 1 | |
| LST51549 | 4PC COMBINATION SQUARE | 1 | |
| LST55156 | CASE FOR 20-12 SQUARE | 1 | |
| LST56242 | COMBINATION SQUARE | 1 | |
| LST56362 | COMBINATION SQUARE | 1 | |
| LST56367 | COMBINATION SQUARE | 1 | |
| LST56368 | COMBINATION SQUARE | 1 | |
| LST56376 | COMBO SQUARE WITH 24IN RULE | 1 | |
| LST66682 | COMBO SQUARE W/PROTRACTOR HEAD | 1 | |
| LTCT14681 | Gage, Concentricity & Squareness | 1 | |
| LTCT25544-01 | Tailpipe Assembly (180 Square- Inch [116,129 mm2]) | 1 | |
| M.230C1 | FACOM 3/4 Male Square Drive, For 1' Adaptor | 1 | |
| M0NT27437 | TOOL-FOR FITTING SQUARE BRACKETS | 1 | |
| M0NT27540 | TEMPORARY SCREWS FOR SQUARE BRACKETS | 1 | |
| M2-3-4HA | SOCKET 2 3/4 X 3/4 IN SQUARE DRIVE, 6 POINT | 1 | |
| M20-104 | ENGINE INLET PLUGS, Southwest Texas Cowl Mod (square shape) (set of 2) | 1 | |
| M201-910 | HEATSHIELD SET (squared windows) | 1 | |
| M3-1-8HA | SOCKET 3 1/8 X 3/4 IN. SQUARE DRIVE, 6 POINT | 1 | |
| MCI00621185 | SINGLE FLINT STRIKER SQUARE | 1 | |
| MCI79268058 | SPI MACHINIST SQUARE SET | 1 | |
| MPN0203 | ENGINEER SQUARE 400MM | 1 | |
| MT3258154 | MORSE CUTTING TOOLS 3/8" X 3/8" X 1 1/8'' X 3" 4 FLUTE SINGLE END CARBIDE FINISHING CENTER CUTTING END MILL-UNCOATED SERIES/LIST #5955 IN SQUARE & CORNER RADIUS END MILLS , | 1 | |
| MT3258162 | MORSE CUTTING TOOLS 1/2" X 1/2" X 2" X 4" 4 FLUTE SINGLE END CARBIDE FINISHING CENTER CUTTING END MILL-UNCOATED SERIES/LIST #5955 IN SQUARE & CORNER RADIUS END MILLS | 1 | |
| MT3290841 | MORSE CUTTING TOOLS 3/16"" X 3/16"" X 3/4"" X 2 1/2"" 4 FLUTE SINGLE END CARBIDE FINISHING CENTER CUTTING END MILL-ALTIN SERIES/LIST #5955T IN SQUARE & CORNER RADIUS. END MILLS , | 1 | |
| MT357-4 | HEX DRIVER (FABL8 *; 3/8" SQUARE DRIVE) | 1 | |
| MT357-5 | TORQUE ADAPTER (FRDH101 *; 3/8" SQUARE DRIVE) | 1 | |
| MTMB3300 | 1/2" SQUARE INPUT | 1 | |
| MTMB740 | TORQUE MULTIPLIER, 1/2" SQUARE INPUT,3/4" SQUARE OUTPUT, 740 FT-LB BAR | 2 | |
| MTTACH1A1 | 24 REFLECTIVE 1/2 INCH SQUARES | 1 | |
| MW910-01 | Moore & Wright Engineers Square, 40x30mm, Grade 0 | 1 | |
| MW910-02 | Moore & Wright Engineers Square, 50x40mm, Grade 0 | 1 | |
| MW910-03 | Moore & Wright Engineers Square, 75x50mm, Grade 0 | 1 | |
| MW910-04 | Moore & Wright Engineers Square, 100x70mm, Grade 0 | 1 | |
| MW910-05 | Moore & Wright Engineers Square, 150x100mm, Grade 0 | 1 | |
| MW910-06 | Moore & Wright Engineers Square, 200x130mm, Grade 0 | 1 | |
| NDT1043CS | BOEING COUNTERSINK REFERENCE STANDARD 737 PT6 51-00-00 PROCEDURE 19, 0.375” DIAMETER 100° COUNTERSINK HOLE. MATERIAL: 43404340M STEEL. SIZE: 2.0" X .375" THICK( ROUNDSQUARE. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NR.1567 | 90 DEGREE SQUARE | 1 | |
| NR.1568 | 90 DEGREE SQUARE | 1 | |
| NR.1569 | 90 DEGREE SQUARE | 1 | |
| NR.1570 | 90 DEGREE SQUARE | 1 | |
| NR.1571 | 90 DEGREE SQUARE | 1 | |
| NR.1572 | 90 DEGREE SQUARE | 1 | |
| NR.1573 | 90 DEGREE SQUARE | 1 | |
| NSA8213-4 | SQUARE SEALS | 1 | |
| OAT-2193 | OUTLINE ADAPTER SQUARE DRIVE CLUTCH SET RUN IN | 1 | |
| OEX724KB | WRENCH 1/4 IN - SQUARE | 1 | |
| PA28-930 | HEATSHIELD SET (three side windows, squared corners) (set of 8) | 1 | |
| PER27452 | TOOL FOR COUNTERBORING SQUARE BRACKETS AND PLATE | 1 | |
| PHP-75 | BUSHING WITH 3/4 SQUARE INSIDE | 1 | |
| PNPGT32 | SETSQUARE | 2 | |
| PNPGT72 | SET SQUARE | 1 | |
| PNPGT99 | SETSQUARE | 2 | |
| PTT45-912 | 12IN STEEL SQUARE STANLEY | 1 | |
| PTT52010.00 | TRY SQUARE 4IN ROSEWOOD HANDLE | 1 | |
| PTT874-623 | TRI SQUARE 12IN ROSEWOOD HANDL | 1 | |
| PWA33788 | CONCENTRICITY AND SQUARENESS GAUGE | 1 | |
| PWA51762-2 | BUTTON,SQUARE | 1 | |
| PWA51762-4 | BUTTON,SQUARE | 1 | |
| QJD12A-80 | 3/8" SQUARE DRIVE RATCHETING HEAD, J-SHANK | 2 | |
| QJSD12A | SQUARE DRIVE TORQUE WRENCH HD | 1 | |
| QJSD8A | SQUARE DRIVE TORQUE WRENCH HD | 1 | |
| QXD12A-80 | RATCHETING SQUARE HEAD-SAE | 1 | |
| QXD16A | 1/2" SQUARE DRIVE RATCHETING HEAD | 1 | |
| QXD24A | 3/4" SQUARE DRIVE RATCHETING HEAD | 1 | |
| QXSD16A | SQUARE DRIVE TORQUE WRENCH HD | 1 | |
| QXSD24A | SQUARE DRIVE TORQUE WRENCH HD | 1 | |
| QYD12A-80 | 3/8" SQUARE DRIVE RATCHETING HEAD | 1 | |
| QYD16A | 1/2" SQUARE DRIVE RATCHETING HEAD | 1 | |
| QYSD12A | SQUARE DRIVE TORQUE WRENCH HD | 1 | |
| QYSD16A | SQUARE DRIVE TORQUE WRENCH HD | 1 | |
| QZSD24A | SQUARE DRIVE TORQUE WRENCH HD | 1 | |
| R235 | 1/4" SOCKET BIT HOLDER WITH STANDARD RETAINING RING 1/4" SQUARE 1/4" FACOM | 1 | |
| RH-.343-T20-2618T6 | 1 Hole Std, Ø.343 (11/32") diameter hole, 1/2" thick x 1" square plate, .020" thru notch | 1 | |
| RL.161 | 1/4" SQUARE DRIVE DUST PROOF RATCHET HANDLE | 1 | |
| RR40S-SP | REVERSIBLE 1/4'' SQUARE DRIVE SHORT HANDLE ROLLER RATCHET | 3 | |
| RR40SP | ROLLER RATCHET 1/4`` SQUARE DRIVE | 4 | |
| RR80SP | DOUBLE CLUTCH 1/4'' SQUARE DRIVE SHORT HANDLE ROLLER RATCHET | 1 | |
| RT5-20MM-7075T6-5/25MM | METRIC 5 STEP WEDGE, 5MM, 10MM, 15MM, 20MM, 25MM, +/- .05MM. MATERIAL: 7075-T6 ALUMINUM. PAD SIZE: 20MM X 20MM SQUARE. | 1 | |
| RUBBER STAMP TOOL | RUBBER 1CM SQUARE STAMP TOOL | 1 | |
| S-460 | 46 PIECE SOCKET SET, 1/4 IN SQUARE DRIVE | 1 | |
| S.120A | FACOM 1/2 IN SQUARE SOCKET WRENCH WITH T-HANDLE HANDLE | 1 | |
| S.232B | FACOM 1/2'' to 3/4'' Square Drive Adaptor Coupler | 2 | |
| S.440AUP | TOOL BOX 1/2 SQUARE | 1 | |
| S1500X | S1500X, SQUARE DRIVE HYDRAULIC TORQUE WRENCH (ENERPAC) | 2 | |
| S22 | MIRROR, SQUARE | 2 | |
| S3000X | , SQUARE DRIVE HYDRAULIC TORQUE WRENCH (ENERPAC) | 2 | |
| SAO10542 | TORQUE ADAPTER 1/2 IN. SQUARE DR | 1 | |
| SB8158-15 | SQUARE DRIVE SWIVEL HEAD BREAKER BARS | 1 | |
| SC41011AL-K | SCALER KIT SQUARE SHANK | 1 | |
| SC41011AU-N5 | SQUARE SHANK SCALER | 1 | |
| SGDMRC4-TMF4 | FLEXIBLE 1/4" SQUARE DRIVE SHANK | 1 | |
| SGF4SQG | SQUARE FILE W GREEN HANDLE | 1 | |
| SGF4SQO | SQUARE FILE W ORANGE HANDLE | 1 | |
| SHB90302 | 1/4” DRIVE HEX, TORX, PHILLIPS, SLOTTED, SQUARE BIT SOCKET SET WITH CASE (44-PIECE) | 1 | |
| SIPRL436 | 1-1/8, 8PT XTRA DP DBLE SQUARE | 1 | |
| SM#6-32X1/2-SZRDSQ | SCREW MACHINE #6-32 X 1/2 STEEL ZINC ROUND HEAD SQUARE | 1 | |
| SM#8-32X1/2-SZPANSQ | MACH. SCREW PANHEAD SQUARE #8-32X1/2 STEEL ZINC | 1 | |
| SN1/4-20-SBOGR8 | SQUARE NUT 1/4-20 STEEL BLACK OXIDE | 1 | |
| SN5/16-18-SBOGR8 | SQUARE NUT 5/16-18 STEEL BLACK OXIDE | 1 | |
| SPEED BRACE | 3/8 SQUARE DRIVE TOOL | 1 | |
| SPEEDY BRACE-1/2 | 1/2 SQUARE DRIVE TOOL | 1 | |
| SQUAREB 12 | POINT MACHINIST SQUARE | 2 | |
| SQUAREB12 | ADJUSTABLE MACHINIST SQUARE | 2 | |
| SRES22 | ADAPTER,TORQUE WRENCH;SINGLE END 0.688";SINGLE END 0.500";SINGLE END INTERNAL SPLINE;SINGLE END INTERNAL SQUARE; STEEL;BOX END;|3.000";12;NO. 22 SPLINE SIZE; CHROMIUM; | 3 | |
| ST-91 | GAGE, COUNTERWEIGHT SQUARENESS | 1 | |
| ST2580-269 | SOCKET WRENCH - CROSS SLOT NUT, 1/2-INCH SQUARE DRIVE | 2 | |
| ST2580-269-1 | Socket wrench cross slot nut 1/2 square drive | 1 | |
| ST2580-269-2 | Socket wrench cross slot nut 1/2 square drive | 1 | |
| ST2580-270 | SOCKET WRENCH - CROSS SLOT NUT, 1/2-INCH SQUARE DRIVE | 2 | |
| ST2580-271 | SOCKET WRENCH - CROSS SLOT NUT, 1/2-INCH SQUARE DRIVE | 1 | |
| STARTVLVTOOLLA330 | DRIVE 3/8 IN-SQUARE | 1 | |
| STD-13062 | AIR MOTOR - 1/2 INCH SQUARE DRIVE (MAX TORQUE = 500 IN-LBS) | 1 | |
| STD-6728 | BOEING TOOL WRENCH-0.20 INCH SQUARE DRIVE ( FOR ANGLE GEARBOX ) | 1 | |
| STD-7111 | ADAPTER - HEX WRENCH, 0.25-INCH HEX TO 0.375IN SQUARE DRIVE, STANDARD | 1 | |
| STD-997 | WRENCH - SPEED, 3/8 INCH SQUARE DRIVE | 1 | |
| STSM14E2 | 14MM TRIPLE SQUARE BIT | 1 | |
| STSM16E | 16MM TRIPLE SQUARE BIT SOCKET | 1 | |
| STSM16E2 | 16MM TRIPLE SQUARE BIT | 1 | |
| STSM18E | 18MM TRIPLE SQUARE SOCKET | 1 | |
| STSM18E2 | 18MM TRIPLE SQUARE BIT ONLY | 1 | |
| SW432 | 1/2" DRIVE 8-POINT SAE 1" DOUBLE SQUARE SOCKET | 1 | |
| SWR2 | SQUARE DRIVE OXYGEN SENSOR | 1 | |
| T-27287 | WRENCH, SQUARE DRIVE 3/32 ALLEN | 1 | |
| T-F-TSQ-08SC | 3SQUARE HAND FILE 8IN SECOND | 1 | |
| T-FF46 | SQUARE FILE FINE 61463681104 | 1 | |
| T-HF13 | 1/4x3 SQUARE SHARP 61463686590 | 1 | |
| T27287 | Wrench, Square Drive 3/32” Allen | 1 | |
| T72 | 1/4" SQUARE HEAD RACHET | 2 | |
| TA3 | 1/4 DRIVE SQUARE DRIVE ADAPTOR | 6 | |
| TAH8961 | 3/4 SQUARE DRIVE EXTENSION BARS WITH 4 POINT SOLUTION | 1 | |
| TE12A | WRENCH,TORQUE;DIAL;0.0 INCH-POUNDS MIN AND 150.0 INCH-POUNDS MAX;DIAL INDICATOR;SINGLE END 0.375";SINGLE END EXTERNAL SQUARE; STEEL;850 RIGID FRAME END DRIVE; | 4 | |
| TE1FUA | WRENCH,TORQUE;DIAL;0.0 INCH-POUNDS MIN AND 15.0 INCH-POUNDS MAX;DIAL INDICATOR;SINGLE END 0.250";SINGLE END EXTERNAL SQUARE; STEEL;RIGID FRAME END DRIVE;|9.906";CASE;0.25 INCH-POUNDS;MEMORY INDICATOR; CHROMIUM;PROFESSIONAL/INDUSTRIAL ASSOCI | 2 | |
| TGUA028 | Bowers TGUA028 Universal Squareness Setting Gauge | 1 | |
| TH27-42500 | SQUARE BRASS MALLET 2500G | 1 | |
| TH27-45000 | SQUARE BRASS MALLET 5000G | 1 | |
| TM4CSA | Driver, Standard Shank, 1/4" female square drive in handle, 6" | 1 | |
| TMD10 | 1/4 SQUARE HEAD SHALLOW SLEEVE | 3 | |
| TMD12 | 1/4 SQUARE HEAD SHALLOW SLEEVE | 4 | |
| TMD14 | 1/4 SQUARE HEAD SHALLOW SLEEVE | 4 | |
| TMD16 | 1/4 SQUARE HEAD SHALLOW SLEEVE | 3 | |
| TMD18 | 1/4 SQUARE HEAD SHALLOW SLEEVE | 4 | |
| TMD8 | 1/4 SQUARE HEAD SHALLOW SLEEVE | 5 | |
| TMDS10 | LONG SOCKET 5/16 SQUARE 1/4 | 2 | |
| TMXK4 | 1/4 "SQUARE HEAD KNURLED EXTENSION ROD | 4 | |
| TMXKBS6 | 1/4IN HEX X 1/4IN SQUARE 6 SKT | 1 | |
| TPS 800 | CPRESSURES 2014 (SQUARESPACE.COM) | 1 | |
| TT1202 | 1.4MM X 28MM SQUARE TERM. TOOL | 1 | |
| TY72 | HI-LOK 1/4 SQUARE D" | 2 | |
| UNI-BAR-DRIVE | BAR FOR RAT/HEAD/SQUAREDR HEAD TOOL | 1 | |
| UT841 | C' type torque spanner（3/8"） square drive | 8 | |
| WAVEB2T40282 | 5/16IN SQUARE DRIVE | 1 | |
| WAVRWB100-13 | SQUARE DRIVE ROLLER | 1 | |
| WWG5W189 | FRAMING SQUARE | 1 | |
| XCRU3 | Square Jaw Ratchet Spring Clamps (Jaw reach: 2" (51 mm)) (Jaw gap: 2" (51 mm)) (Add to cart: Add To Cart) | 1 | |
| XCRU5 | Square Jaw Ratchet Spring Clamps (Jaw reach: 2" (51 mm)) (Jaw gap: 2" (51 mm)) (Add to cart: Add To Cart) (Jaw reach: 4" (102 mm)) (Jaw gap: 4" (102 mm)) (Add to cart: Add To Cart) | 1 | |
| XD08370 | SOCKET-2-3/4" x 1" SQUARE DRIVE 6 POINT | 1 | |
| XD08380 | SOCKET-3-1/8" x 1" SQUARE DRIVE 6 POINT | 1 | |
| Y1604 | Y Die Set - .130 Hex & .067 Square | 2 | |
| Y1605P | Y Die Set - .213 Hex & .067 Square w/ Alignment Pin | 2 | |
| Y1626S | Y Die Set - .178 Hex & .052 Square | 2 | |
| Y1633 | Y Die Set - .200 Square,.190 (THRU) & .500 Circle | 2 | |
| Y1639S | Y Die Set - .195 Hex & .028 Square | 2 | |
| Y1640P | Y Die Set - .160 Hex & .049 Square w/ Alignment Pin | 2 | |
| Y1664 | Y Die Set - .421 Hex,.095 Square | 2 | |
| Y1670 | Y Die Set - .217 Hex,.063 Square | 2 | |
| Y1671 | Y Die Set - .178 Hex,.042 Square | 2 | |
| Y1681P | Y Die Set - .130 Hex,.063 & .029 Square w/ Alignment Pin | 2 | |
| Y1682 | Y Die Set - .256 Hex,.063 Square | 2 | |
| Y1698P | Y Die Set - .106 Hex,.028 Square w/ Alignment Pin | 2 | |
| Y1833P | Y Die Set - .197 Hex,.042 Square w/ Alignment Pin | 2 | |
| Y1839P | Y Die Set - .067 Square w/ Alignment Pin | 2 | |
| Y1840P | Y Die Set - .063 Square w/ Alignment Pin | 2 | |
| Y1854P | Y Die Set - .128 - .188 Hex,.058 Square w/ Alignment Pin | 2 | |
| Y2067S | Y Die Set - 2x .028 & 2x .030 Square | 2 | |
| Y298 | Y Die Set - .075 Square | 2 | |
| Y365 | Y Die Set - .118 & .075 Square | 2 | |
| Y378 | Y Die Set - .128 Hex,.042 Square | 2 | |
| Y460S | Y Die Set - .106 Hex,.028 Square | 2 | |
| Y487 | Y Die Set - .250 Hex,.059 Square,.125 Circle | 2 | |
| Y512 | Y Die Set - .158 Circle,.047 Square | 2 | |
| Y684 | Y Die Set - .200 Square,.190 (THRU) & .500 Circle for Nexus MP-101-4 | 2 | |
| Y685 | Y Die Set - .255 Hex,.049 Square | 2 | |
| Y686 | Y Die Set - .178 Hex,.049 Square | 2 | |
| Y733 | Y Die Set - .051 Square | 2 | |
| Y734 | Y Die Set - .051 Square | 2 | |
| Y736 | Y Die Set - .050 Square | 2 | |
| Y737 | Y Die Set - .050 Square | 2 | |
| Y738 | Y Die Set - .050 Square | 2 | |
| Y739 | Y Die Set - .050 Square | 2 | |
| Y740 | Y Die Set - .0513 Square | 2 | |
| Y741 | Y Die Set - .054 Square | 2 | |
| Y742 | Y Die Set - .050 Square | 2 | |
| Y800P | Y Die Set - .169 Hex, .0525 Square w/ Alignment Pin | 2 | |
| Y811P | Y Die Set - .240 Circle, .043 Square w/ Alignment Pin | 2 | |
| Y837P | Y Die Set - .128 Hex, .049 Square w/ Alignment Pin | 2 | |
| Y877 | Y Die Set - .205 Hex, .044 Square | 3 | |
| Y920 | Y Die Set - .139 Square | 2 | |
| Y985 | Y Die Set - .051 Square,.170 Circle | 2 | |
| YA391 | MULTIPLIER,TORQUE WRENCH;1200.0 FOOT-POUNDS MAX;1ST END 0.500" NOMINAL#2ND END 0.750";1ST END INTERNAL SQUARE#2ND END EXTERNAL SQUARE;6 TO 1; STEEL;GEARED;|20.000"; CHROMIUM; | 1 | |
| YA393RK | SQUARE DRIVE REPLACEMENT KIT | 1 | |
| YA734A | LUBRICATING GUN,HAND;5500.0 POUNDS PER SQUARE" GAGE;LEVER;|MEDIUM MINE PROTECTED VEHICLE - MMPV;FLEXIBLE RUBBER HOSE;HYDRAULIC COUPLER;PACS; | 5 | |
| 2652 | SQUARE DRIVE, INCHES 3/8 | 1 | |
| MSI-SQ-350-125-600 | BUMPER CUSHION,SAFETY,STRAIGHT SQUARE,SE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
