| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 55242 | SPLINE | 1 | |
| 6796182 | Spline | 2 | |
| 23032404 | Spline | 2 | |
| A27079-10 | Spline | 1 | |
| A27079-11 | Spline | 1 | |
| B28009-10 | SPLINE | 1 | |
| F77252 | SPLINE | 1 | |
| G52001-7 | SPLINE | 1 | |
| J27030-18 | SPLINE | 1 | |
| J27030-20 | SPLINE | 1 | |
| J27030-20-M | SPLINE | 1 | |
| PWA87187-11 | Spline | 1 | |
| SPL-9414 | Spline | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 01011007 | 40.SP.7 - 1/4DR x 7 SOCKET SPLINE-DRIVE | 1 | |
| 01011008 | 40.SP.8 - 1/4DR x 8 SOCKET SPLINE-DRIVE | 1 | |
| 01011009 | 40.SP.9 - 1/4DR x 9 SOCKET SPLINE-DRIVE | 1 | |
| 01011010 | 40.SP.10 - 1/4DR x 10 SOCKET SPLINE-DRIVE | 1 | |
| 01011012 | 40A SP 12 = 3/8-SPLINE-DRIVE-SOCKET 1/4 SP12 | 1 | |
| 01011014 | 40A SP 14 = 7/16-SPLINE-DRIVE-SOCKET 1/4 SP14 | 1 | |
| 01021007 | 40AL SP 7 = 7/32-1/4DR SPLINE-DRIVE-SOCKET SP7 | 1 | |
| 01021008 | 40.L.SP.8-1/4DR x 8mm SOCKT EX DP SPLINE | 1 | |
| 01021010 | 40AL SP10 = 5/16-1/4DR SPLINE-DRIVE-SOCKET SP10 | 1 | |
| 01542016 | 402ASP.8=1/4"-1/4"DRxNo8 UNIFLEX SPLINE SKT | 1 | |
| 01542020 | 402ASP 10 =5/16-1/4DRxNo10 UNIFLEX SPLINE SKT | 1 | |
| 02011012 | 45.ASP.12-3/8DR SPLINE SOCKET 3/8"(12) | 1 | |
| 02011014 | 45.ASP.14-3/8DR SPLINE SOCKET 7/16"(14) | 1 | |
| 02011016 | 45.ASP.16-3/8DR SPLINE SOCKET 1/2"(16) | 1 | |
| 02021012 | 46.SP.12-3/8"DR SPLINE SOCKT 3/8(12) DP | 1 | |
| 02021014 | 46.SP.14-3/8"DR SPLINE SCKT 7/16(14) DP | 1 | |
| 02480014 | 447.A.SP.7/32-3/8DR SPLINE-DR ADAPTOR 7/32" | 1 | |
| 02480016 | 447.A.SP.1/4-3/8DR SPLINE-DR ADAPTOR 1/4" | 1 | |
| 02480018 | 447.A.SP.9/32-3/8DR SPLINE-DR ADAPTOR 9/32" | 1 | |
| 02480020 | 447.A.SP.5/16-3/8DR SPLINE-DR ADAPTOR 5/16" | 1 | |
| 02480024 | 447.A.SP.3/8-3/8DR SPLINE-DR ADAPTOR 3/8" | 1 | |
| 02480028 | 447.A.SP.7/16-3/8DR SPLINE-DR ADAPTOR 7/16" | 1 | |
| 02480032 | 447.A.SP.1/2-3/8DR SPLINE-DR ADAPTOR 1/2" | 1 | |
| 02480034 | 447.A.SP.9/16-3/8DR SPLINE-DR ADAPTOR 9/16" | 1 | |
| 02480036 | 447.A.SP.5/8-3/8DR SPLINE-DR ADAPTOR 5/8" | 1 | |
| 03012024 | 50AP.SP.12 = 3/8-1/2DR SPLINE-DRIVE SOCKET 12 | 1 | |
| 03012028 | 50AP.SP.14 = 7/16-1/2DR SPLINE-DRIVE SOCKET 14 | 1 | |
| 03012034 | 50AP SP 18 = 9/16-1/2DR SPLINE-DRIVE SOCKET 18 | 1 | |
| 03013028 | 50APL SP 14 = 7/16-1/2DR SPLINE-DRIVE DEEP SKT 14 | 1 | |
| 03090005 | 54.CV.M.5-1/2DR x M5 SPLINE DRIVER SKT | 1 | |
| 03090006 | 54.CV.M.6-1/2DR x M6 SPLINE DRIVER SKT | 1 | |
| 03090007 | 54.CV.M.7-1/2DR x M7 SPLINE DRIVER SKT | 1 | |
| 03090008 | 54.CV.M.8-1/2DR x M8 SPLINE DRIVER SKT | 1 | |
| 03090009 | 54.CV.M.9-1/2DR x M9 SPLINE DRIVER SKT | 1 | |
| 03090010 | 54.CV.M.10-1/2DR x M10 SPLINE DRIVER SKT | 1 | |
| 03090012 | 54.CV.M.12-1/2DR x M12 SPLINE DRIVER SKT | 1 | |
| 03090013 | 54.CV.M.13-1/2DR x M13 SPLINE DRIVER SKT | 1 | |
| 03090014 | 54.CV.M.14-1/2DR x M14 SPLINE DRIVER SKT | 1 | |
| 03090016 | 54.CV.M.16-1/2DR x M16 SPLINE DRIVER SKT | 1 | |
| 03390001 | 3000.1,5X58-1/2" SOCKET, MULTI SPLINE | 1 | |
| 0292101430 | SPLINED FLANGE | 1 | |
| 0292104240 | SPLINED SLEEVE | 1 | |
| 0292104810 | FLANGE,SPLINED | 1 | |
| 0292900160 | SHAFT,SPLINED | 1 | |
| 0292901060 | FLANGE, SPLINED | 1 | |
| 0301042780 | SPLINED SHAFT | 1 | |
| 0319112990 | SPLINED FLANGE | 1 | |
| 0319141940 | FLANGE,SPLINED | 1 | |
| 0319151000 | FLANGE,SPLINED | 1 | |
| 0319203730 | SPLINED NUT | 1 | |
| 071-06010-0000 | SPLINE ADAPTER | 2084 | |
| 071-06010-0000 | SPLINE ADAPTER | 1 | |
| 071-06010-0000-LET | SPLINE ADAPTER | 1 | |
| 071-6010-0000 | SPLINED ADAPTER | 1 | |
| 093-9200 | SPLINE KEY | 1 | |
| 093-9202 | SPLINE KEY | 1 | |
| 093-9204 | ALCOA BOLTED SPLINE DRIVE HANDLE | 1 | |
| 100-49291 | Impeller Shaft Spline Wrench | 1 | |
| 100-49291 PM | IMPELLER SHAFT SPLINE WRENCH | 2084 | |
| 100-49292-5-B | Splined socket | 1 | |
| 100-49292-B | Splined socket wrench | 1 | |
| 100-51128 | SPLINE CRANK | 1 | |
| 100-51128 | Spline Crank | 1 | |
| 100-51963 | Crank ( For Drive Shaft Spline ) | 1 | |
| 1000-13AP P51 | Spline Adapter | 1 | |
| 109-0425-01-3 | SPLINED ADAPTER | 1 | |
| 109-3401-19-1 | SUPPORT, TAIL ROTOR SLIDER AND SHAFT SPLINED PLAT CHECK | 1 | |
| 10C1131G01 | FIXTURE, SPLINE BOLT REMOVAL (REMOVAL FIXTURE) | 1 | |
| 10C1258 | DRESSING KIT/GEARSHAFT SPLINE PLUG | 1 | |
| 1106019-1 | SPLINE WRENCH | 1 | |
| 1106109-1 | SPLINE WRENCH | 1 | |
| 1106759-4 | REMOVAL, SPLINE ADAPTER | 1 | |
| 1106759-4PM | REMOVAL, SPLINE ADAPTER | 2084 | |
| 1106769-2 | Generator Spline Adapter Removal | 1 | |
| 1106769-2PM | GENERATOR SPLINE ADAPTER REMOVAL | 2084 | |
| 1106769-4 | VESPEL SPLINE ADAPTER WITHDRAWAL TOOL | 2 | |
| 1106769-4PM | VESPEL SPLINE ADAPTER WITHDRAWAL TOOL | 2084 | |
| 1106841-1 | Installer, Spline Adapter | 2 | |
| 1106841-1 | SPLINE INSERTION TOOL | 2 | |
| 1106841-1 PM | INSTALLER, SPLINE ADAPTER | 2084 | |
| 1106841-1PM | INSTALLER, SPLINE ADAPTER | 2084 | |
| 1106926 | NIIN 013767268 SPLINE ADAPTER INSTALLER | 1 | |
| 111-115 | Mitutoyo 111-115 Spline Micrometer 0-25mm | 1 | |
| 111-116 | Mitutoyo 111-116 Spline Micrometer 25-50mm | 1 | |
| 111-117 | Mitutoyo 111-117 Spline Micrometer 50-75mm | 1 | |
| 111-118 | Mitutoyo 111-118 Spline Micrometer 75-100mm | 1 | |
| 111-166 | Mitutoyo 111-166 Spline Micrometer 0-1" | 1 | |
| 1159GSE20006-5 | SPLINE ADAPTER INSTALLATION TOOL | 2084 | |
| 1159GSE20006-7 | SPLINE ADAPTER INSTALLATION TOOL | 2084 | |
| 1159GSE200065 | ALT SPLINE ADAPT,INS | 2084 | |
| 1159GSE47011-1 | ADAPTER VESPEL SPLINE APU | 2084 | |
| 1159GSEM50136-11 | SPLINE FLAP DRIVE SOCKET | 1 | |
| 1159SEP30100-5 | SPLINE ADAPTER INSTALLATION TOOL | 2084 | |
| 1159SEP30101-3 | Spline Adapter Removal Tool | 1 | |
| 1159SEP30110-1 | SPLINE ADAPTER INSTALLATION TOOL | 1 | |
| 1159SEP30110-3 | SPLINE ADAPTER INSTALLATION TOOL | 1 | |
| 117-68021 W11 | SPLINE PROTECTOR | 1 | |
| 117-68021W11 | SPLINE PROTECTOR | 1 | |
| 11C3296 | PROTECTOR - THREAD/SPLINE - LPT SHAFT - FORWARD | 1 | |
| 1200-2 | SPLINE, BALL BEARING | 1 | |
| 12777TOOL-F | FLAP SPLINE ADAPTER | 1 | |
| 1400 | SPLINE KEY (BRISTOL KEY) 0.145 IN | 1 | |
| 129339 | EXPANDER SPLINE | 1 | |
| 130480 | SPECIAL TOOL - INCO SPLINE QUICK CHECK GAGE KIT | 1 | |
| 1369-04 P03 | Spline Shaft | 1 | |
| 1369-05J P13 | Spline Shaft | 1 | |
| 14PF465 | ADAPTER, DRIVE TOOL SPLINE | 1 | |
| 14PF465-TOOL | ADAPTOR, DRIVE TOOL SPLINE (FEMALE) | 6 | |
| 14PF465KF-10001 | FLIGHT CONTROL TORQUE TUBE SPLINE | 1 | |
| 14PF465KF-1001 | SPLINE ADAPTER - TORQUE TUBE | 3 | |
| 14PF465KF1001 | SPLINE ADAPTER –TORQUE TUBE | 2084 | |
| 14PF465KIT | SPLINE ADAPTER - TORQUE TUBE | 1 | |
| 14PF465T00L | ADAPTER FLAP DRIVE FEMALE SPLINE | 2084 | |
| 14PF465TOOL | Adapter Flap/Slat Driveline − Female Spline | 6 | |
| 14PF465TOOL-M | ADAPTOR, FLAP/SLAT DRIVELINE - MALE SPLINE | 2084 | |
| 14PF465TOOLM | Adapter Flap/Slat Driveline − Male Spline | 3 | |
| 14PF485KIT | SPLINE ADAPTER –TORQUE TUBE | 1 | |
| 14PF65KF-1001 | SPLINE ADAPTER TORQUE TOOL | 1 | |
| 159-2833 | 5 SPLINE SKT 2 3/16 SGL HEX I | 1 | |
| 16A11894L1-1 | WRENCH ASSEMBLY, SPLINE SOCKET INLET STRUT LOWER BOLT | 1 | |
| 17A1733G02 | SPLINE, PLUG SHAFT | 1 | |
| 17PF465TOOL | FEMALE SPLINE ADAPTER, FLAP SLAT DRIVELINE | 1 | |
| 1871 | CFM 56 SPLINE DRIVE ADAPTOR | 2 | |
| 18C2268-2 | SPLINE SOCKET - LDS | 1 | |
| 1C6827 | GAGE SET, SPLINE WEAR | 1 | |
| 1C6827 REV E | GAGE SET, SPLINE WEAR | 1 | |
| 1C6827G01 | GAGE SET, SPLINE WEAR | 1 | |
| 1C8033 | ADAPTER - DRIVE-SPLINE | 1 | |
| 1C8033G01 | Adapter, Splined - TGB, Borescope Inspection | 1 | |
| 1C8208G02 | SPLINE, ADAPTER, MANUALFRONT DRIVE PAD | 2084 | |
| 1C8315G01 | FIXTURE, I/R-SPLINED ADAPTER, HP COMPRES | 1 | |
| 2024871-1 | SPLINED ADAPTER | 1 | |
| 2025070-1 | SPLINED SHAFT SLEEVE | 1 | |
| 2025580-1 | SPLINE WRENCH | 1 | |
| 204 | SPLINE MEASURING KIT | 1 | |
| 205 | SPLINE MEASURING KIT | 1 | |
| 206 | SPLINE MEASURING KIT | 1 | |
| 206-TRGB-OH-03 | SPLINE WRENCH | 2084 | |
| 207TFEL | 7PC DEEP SPLINE SOCKET SET | 1 | |
| 208FRDH | 3/8" DRIVE 5/16" TO 15/16" HEX, SPLINE TORQUE ADAPTOR SET | 1 | |
| 209TFES | 9PC SPLINE SET | 2084 | |
| 212 | SPLINE MEASURING KIT | 1 | |
| 216565PM | SPLINE DRIVER | 2084 | |
| 21C7349G01 | PROTECTOR, SPLINE- POWER TURBINE SHAFT | 2084 | |
| 2313M58G01 | VSFG SPLINE PLUG | 1 | |
| 2313M60G01 | HYDRAULIC PUMP SPLINE PLUG | 1 | |
| 2370-T160-001 | AXLE SPLINER UNLKG GSE | 2 | |
| 24542AT1 | SPLINE BUSHING CALIBRATION TOOL | 1 | |
| 2468M31P01 | NUT, SELF-LOCKING - SPLINE DRIVE, SOLID FILM LUBRICATED | 1 | |
| 2468M31P03 | NUT, SELF-LOCKING- SPLINE DRIVE, SOLID FILM LUBRICATED | 1 | |
| 47 | SPLINE MEASURING KIT | 1 | |
| 447 | TORQUE ADAPTOR 9/16" SPLINE DRIVE | 1 | |
| 3482 | HOLDER,COMPRESSOR ROTOR FWD SPLINE | 1 | |
| 3755 | FWD.SPLINE HOLDER | 2084 | |
| 33260 | TURBINE ROTOR SPLINE FIXTURE | 1 | |
| 44804 | GEAR CARRIER 6TH SPLINE | 2084 | |
| 55242 | SPLINE | 1 | |
| 57324 | TORQUE ADAPTER 3/8 - 1/4 M8 SPLINE | 2084 | |
| 163563 | ADAPTER-DRIVE SPLINES FUEL PUMP ROTATION CHECK | 2084 | |
| 208062 | Mitutoyo 208062 Spindle attachment tip, Spline | 1 | |
| 216168 | Spline Shaft Support | 1 | |
| 216565 | Spline Driver | 2 | |
| 216723 | FLOATING SPLINE SHAFT | 1 | |
| 256106 | ADAPTER,SPLINE | 2 | |
| 280219 | Internal Spline Socket Wrench | 1 | |
| 293386 | Adapter, Torque, Wrench, Splined | 1 | |
| 298493 | Adapter, Kit, Installation/Removal Seal and Spline Adapter | 1 | |
| 298494 | Adapter, Threaded, Removal Spline Adapter | 1 | |
| 298495 | Adapter Assembly, Splined, Starter | 1 | |
| 298496 | Driver, Installation, Spline Adapter | 1 | |
| 1900656 | SPLINE WRENCH | 1 | |
| 2470032 | SPLINE-DRIVE-ADAPTOR 1/2 *3/8 | 2084 | |
| 247C5079P05 | Tube,splined | 1 | |
| 253782-1 | SPLINE WRENCH | 1 | |
| 2550139 | Adapter-Spline | 1 | |
| 2550176 | Adapter, spline | 1 | |
| 2550177 | Adapter Spline | 1 | |
| 2550693 | Plug Gage, Involute Spline – No-Go | 1 | |
| 22410028 | 45APSP 7/16 SP14-SOCKETS SPLINE-DRIVE 3/8 | 1 | |
| 23002205 | STARTER GENERATOR GEARSHAFT NO-GO SPLINE GAUGE | 2084 | |
| 23003629 | GAGE – EXTERNAL HELICAL SPLINE, SAFETY COUPLING | 2084 | |
| 23003630 | GAGE – INTERNAL HELICAL SPLINE, SAFETY COUPLING INNER MEMBER | 2084 | |
| 23006780 | RING----SPLINED, SPUR ADAPTER GEAR, BALANCE | 1 | |
| 23008673 | COMPRESSOR ROTOR SPLINE ADAPTER | 1 | |
| 23008674 | RING – CONCENTRICITY, 2ND STAGE TURBINE SPLINED ADAPTER | 2084 | |
| 23030279 | GAUGE-COMPRESSOR IMPELLER SPLINE | 2084 | |
| 23032403 | WRENCH & HOLDER - 2ND STAGE TURBINE SPLINE ADAPTER | 1 | |
| 23032404 | SPLINE - STARTER SHAFT TURNING | 2 | |
| 23054758 | Adapter – Splined, Frame Assembly, Upper Gearbox | 1 | |
| 23060752 | SPLINE NO GO GAUGE | 2084 | |
| 23060755 | SPLINE NO GO GAUGE | 2084 | |
| 23060756 | SPLINE NO GO GAUGE | 2084 | |
| 269T1005 | Compressor Check Spline Adapter Engine Turning Tool | 2 | |
| 269T3330 | SPLINE HUB | 2084 | |
| 269T3330-03 | Installation Aide, Main Rotor Splined Hub | 1 | |
| 269T9281 | Wrench, Splined Fitting | 1 | |
| 269T9330 | Socket 269A6029 Nut Drive Spline Tail Rotor Gearbox | 2 | |
| 278114-1 | DIAL INDICATOR AND BASE FOR CHECK OF SPLINES FUEL PUMP DRIVE SHAFT | 1 | |
| 281688-4 | Internal Spline Spanner Wrench | 1 | |
| 281720-1 | WRENCH BOX SPLINED | 1 | |
| 281875-1-1 | ADAPTER, TORQUE WRENCH, SPLINED | 1 | |
| 287045-1 | ADAPTER TORQUE WREBCH INTERNAL SPLINE | 1 | |
| 287339-1-1 | Socket and Spline Wrench Assembly | 1 | |
| 287706-1 | TORQUE WRENCH SPLINED | 1 | |
| 289130-1 | SPLINER TORQUE WRENCH ADAPTER | 1 | |
| 289482-1 | ADAPTER WRENCH SPLINED | 1 | |
| 294760-1 | SPLINE ADAPTER | 1 | |
| 294866-7 | BEARING REMOVAL TOOL (USED TO LOCATE IN LARGER ID OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892576-1 BEARING) | 1 | |
| 294866-8 | BEARING REMOVAL TOOL (USED TO LOCATE IN SMALLER ID OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 294870-7 | BEARING REMOVAL PLATE (USED TO SUPPORT 892575-1 BEARING WHEN REMOVING 3860167-1 SPLINED SHAFT FROM BEARING) | 1 | |
| 2960-C | WET SPLINE CAV FI ADAPTOR HOSE | 1 | |
| 296818-1 | SPLINED ADAPTER INSTALLATION AND REMOVAL TOOL | 1 | |
| 296903-1 | SPLINED HOLDER | 1 | |
| 296903-2 | SPLINED HOLDER | 1 | |
| 296903-3 | HOLDER, SPLINED | 1 | |
| 297292-1 | SPLINE PLUG GAUGE | 1 | |
| 298062-1 | Spline Adapter Puller Set | 1 | |
| 298062-11 | INSTALLER, STARTER SHAFT SPLINE ADAPTER | 1 | |
| 298062-13 | REMOVER,STARTER SHAFT SPLINE ADAPTER | 1 | |
| 2C14113 | HPC ROTOR FWD SPLINE ADAPTER REMOVAL-INST. | 1 | |
| 2C14113G01 | FIXTURE, INSTALL AND REMOVE-COMP.ROTOR FWD. SHAFT SPLINE ADAPTER | 3 | |
| 2C14155P23 | SPLINE LOCKOUT PLUG | 1 | |
| 2C14199P69 | ADAPTOR, SPLINE | 1 | |
| 2C14635 | SPLINED SPOOL | 1 | |
| 2C14635P02 | SPLINED SPOOL | 2 | |
| 2C6038P08 | INNER SPLINE ASSEMBLY | 2084 | |
| 2C6341 | WRENCH, SPLINE- DIRECT DRIVE | 1 | |
| 2C6341G02 | WRENCH,SPLINE-DIRECT DRIVE | 2 | |
| 2C6341G02TK | WRENCH, SPLINE-DIRECT DRIVE | 1 | |
| 2C634I | WRENCH, SPLINE- DIRECT DRIVE | 1 | |
| 2C6591P01 | SPLINE DRIVE AGB | 1 | |
| 2C6900G01 | TOOL - INSTALL. SPLINED | 1 | |
| 2C6943G02 | WRENCH,SPLINE ADAPTER NUT,ASSEM HPC | 1 | |
| 2C8055 | GO/NO GO GAGE SPLINE WEAR, HORIZ DRIVE SHAFT - 1GB | 1 | |
| 2C8055 REV B | GO/NO GO GAGE SPLINE WEAR, HORIZ. DRIVE SHAFT - IGB | 1 | |
| 2C8055G01 | SPLINE WEAR GAGE | 2 | |
| 2C8055G01(P02) | IGB Spline Gage | 1 | |
| 2C8062G01 | IGB Spline Check | 1 | |
| 2C8063 | GO/NO GO GAGE, INSPECT-SPLINED ADAPTOR | 1 | |
| 2C8063 REV C | GO/NO GO GAGE, INSPECT-SPLINED ADAPTOR | 1 | |
| 2C8064 | GO/NO GO GAGE, INSPCT-SPLINED ADAPTOR | 1 | |
| 2C8064 REV C | GO/NO GO GAGE, INSPCT-SPLINED ADAPTOR | 1 | |
| 2C8064G01 | Spline Adapter | 2 | |
| 2C81434 | SPLINE, DRIVE SQUARE | 1 | |
| 2C91237P01 | GAGE-SPLINE WEAR | 1 | |
| 2C91238P01 | GAGE - SPLINE WEAR | 1 | |
| 2C91239P01 | GAGE - SPLINE WEAR | 1 | |
| 2C91253P01 | GAGE - SPLINE WEAR | 1 | |
| 2MIT65B04008 | SPLINE ADAPTER - ANGLE GEARBOX DRIVE, INBOARD TRAILING EDGE FLAP | 2084 | |
| 30-803-0301 | Sylvac 30-803-0301 S-Mike Pro Digital Spline Micrometer Range 0-25mm | 1 | |
| 30-903-0601 | Sylvac 30-903-0601 S-Mike Pro Digital Spline Micrometer Range 25-60mm | 1 | |
| 30-903-1001 | Sylvac 30-903-1001 S-Mike Pro Digital Spline Micrometer Range 60-95mm | 1 | |
| 30R0554G01 | OUTPUT SHAFT,SPLINE INSPECTION KIT | 1 | |
| 315SESY | SOCKET SET, SPLINED (BOX 1) | 1 | |
| 331-351 | Mitutoyo 331-351 Digimatic Spline Micrometer 0-25mm / 0-1" | 1 | |
| 331-352 | Mitutoyo 331-352 Digimatic Spline Micrometer 25-50mm / 1-2" | 1 | |
| 331-353 | Mitutoyo 331-353 Digimatic Spline Micrometer 50-75mm / 2-3" | 1 | |
| 331-354 | Mitutoyo 331-354 Digimatic Spline Micrometer 75-100mm / 3-4" | 1 | |
| 331-361 | Mitutoyo 331-361 Digimatic Spline Micrometer 0-25mm /0-1" | 1 | |
| 331-362 | Mitutoyo 331-362 Digimatic Spline Micrometer 25-50mm /1-2" | 1 | |
| 331-363 | Mitutoyo 331-363 Digimatic Spline Micrometer 50-75mm /2-3" | 1 | |
| 331-364 | Mitutoyo 331-364 Digimatic Spline Micrometer 75-100mm /3-4" | 1 | |
| 332A93-3228-00 | SLEEVE SPLINED SPANNER | 1 | |
| 332A93‐3228‐00 | SLEEVE SPLINED SPANNER | 1 | |
| 3400A0000-01W01 | FLAP-, SLATSYSTEM RIGGING SPLINE ADAPTER DRIVE TOOL | 1 | |
| 3533-25A | MITUTOYO331-351DIGIMATICSPLINEMICROMETER0-25M | 2084 | |
| 3MIT65B04008-12 | SPLINED WRENCH - TORQUE TUBE, INBOARD FLAP DRIVE | 1 | |
| 3T6510A07437 | SHAFT ASSY SPLINED AFT | 1 | |
| 4006753 | SPLINED COUPLING(ASSEMBLY) | 1 | |
| 400A0000-01W01 | FLAP-, SLATSYSTEM RIGGING SPLINE ADAPTER | 1 | |
| 4013406-625G01 | GEARSHAFT SPLINE PLUG | 1 | |
| 4013406-625G02 | GEARSHAFT SPLINE PLUG | 1 | |
| 4013606-583G01 | VSFG SPLINE PLUG | 1 | |
| 4025T07P02 | PLUG−SPLINE BEVEL | 2084 | |
| 40581616 | 130ASP 8=1/4-HPQ SPANNER SPLINE SP8 | 1 | |
| 40582020 | 130ASP 10=5/16-HPQ SPANNER SPLINE SP10 | 1 | |
| 40582424 | 130ASP 12=3/8-HPQ SPANNER SPLINE SP12 | 1 | |
| 40582828 | 130ASP 14=7/16-HPQ SPANNER SPLINE SP14 | 1 | |
| 40583232 | 130ASP 16=1/2-HPQ SPANNER SPLINE SP16 | 1 | |
| 40583434 | 130ASP 18=9/16-HPQ SPANNER SPLINE SP18 | 1 | |
| 406-240-012-101 | EXTERNAL SPLINE WRENCH ASSY | 1 | |
| 41160709 | 220ASP.7/32.X.9/32-7x9 spline EXLONG DE RING SPNR | 1 | |
| 41160810 | 220ASP.1/4.X.5/16-8x10spline EXLONG DE RING SPNR | 1 | |
| 41161214 | 220ASP.3/8.X.7/16-12x14spline EXLONG DE RINGSPNR | 1 | |
| 41161618 | 220ASP.1/2.X.9/16-16x18spline EXLONG DE RINGSPNR | 1 | |
| 41161820 | 220ASP.9/16.X.5/8-18x20spline EXLONG DE RINGSPNR | 1 | |
| 41162224 | 220ASP.11/16.X.3/4-22x24spline EXLONG DE RINGSPNR | 1 | |
| 41162630 | 220ASP.13/16X15/16-26x30spline EXLONG DE RINGSPNR | 1 | |
| 41162832 | 220ASP.7/8.X.1-28x32spline EXLONG DE RINGSPNR | 1 | |
| 412-240-028-101 | ALIGNMENT TOOL M/R TQ. SPLINE-MAST ASSY M | 1 | |
| 41570810 | 25ASP.8.X.10-SPLINE DR RATCHET RING SPANNER | 1 | |
| 41571214 | 25ASP.12.X.14-SPLINE DR RATCHET RING SPANNER | 1 | |
| 41572428 | 25ASP.24.X.28-SPLINE DR RATCHET RING SPANNER | 1 | |
| 427-240-103-101 | SPLINE WRENCH | 1 | |
| 429-242-017-101 | SOCKET,SPLINED | 1 | |
| 447.A.1/2 | SPLINE-DRIVE-ADAPTOR1/23/8 | 1 | |
| 45.ASP.16 | 3/8DR SPLINE SOCKET 1/2 16 | 2084 | |
| 4610381505 | SPLINED HUB TOOL | 1 | |
| 4900494 | ADAPTER, SPLINE REMOVAL TOOL APU | 1 | |
| 493-9002 | 5IN DIA 1IN SPLINE | 1 | |
| 493-9012 | 6IN DIA 1IN SPLINE | 1 | |
| 50000-T5 | SPLINE ADAPTOR | 1 | |
| 50000T5 | SPLINE ADAPTOR | 1 | |
| 508264-001 | Spline Wrench | 1 | |
| 53172-2001 | Flap Spline Tool | 1 | |
| 558-1-13542 | SPLINE WEAR CHECKING TOOL | 1 | |
| 57481-T1 | Spline Adapter | 1 | |
| 57481-T1 PM | SPLINE ADAPTER | 2084 | |
| 57481T1 | SPLINE ADAPTER | 1 | |
| 57913-T1 | SPLINE ADAPTER | 1 | |
| 57914T1 | SPLINE ADAPTER | 1 | |
| 58161A0000-01 | SPLINE ADAPTER | 2084 | |
| 58162A0000-01 | SPLINE ADAPTER | 2084 | |
| 58163-0001 | SPLINE ADAPTER | 1 | |
| 58163A0000-01 | SPLINE ADAPTER | 1 | |
| 58164-0001 | SPLINE ADAPTER | 1 | |
| 58164A0000-01 | SPLINE ADAPTER | 2084 | |
| 5837600-34 | SPLINE INSERT REMOVAL TOOL | 1 | |
| 5837600-35 | SPLINE INSERT INSTALLATION TOOL | 1 | |
| 5838419-1 | TOOL, SPLINE ADAPTER | 1 | |
| 58573T1 | SPLINE ADAPTOR | 1 | |
| 60G2756004N001 | SPLINED FLAP DRIVE ADAPTER KIT | 1 | |
| 61700-10427-042 | VESEL SPLINE REMOVAL TOOL | 1 | |
| 65058094-1 | SPLINE WRENCH | 1 | |
| 668 | KIT ASSY JASCO 6 SPLINE SQUARE BASE SUIT 6555 + 7555 | 2 | |
| 754331 | SPLINE MUFF (739515 PN IDG S) | 1 | |
| 832623 | SHAFT TORQUE, SPLINE | 1 | |
| 5838419 | TOOL, SPLINE ADAPTER | 1 | |
| 6795588 | WRENCH HOLDING 32/64 PITCH, 24 TOOTH SPLINE | 2084 | |
| 6796182 | SPLINE, STARTER SHAFT TURNING | 2084 | |
| 6796301 | SUPPORT, TORQUEMETER SPLINE | 2084 | |
| 6796316 | WRENCH - TORQUEMETER INNER SHAFT SPLINE | 1 | |
| 6796645 | WRENCH-SPLINE, NO. 60 PROP SHAFT THRUST BEARING | 2084 | |
| 6797015 | HOLDER, COMPRESSOR EXTENSION SHAFT, FORWARD SPLINE | 2084 | |
| 6797116 | SPLINE - STARTER SHAFT TURNING | 1 | |
| 6797368 | WRENCH SPLINE PROPELLER SHAFT 34 | 2084 | |
| 6797788 | WRENCH SPLINE PLANET JOUNIOR RR RET NUT | 2084 | |
| 6797789 | WRENCH SPLINE PLANET JOURNAL FRT RET NUT | 2084 | |
| 6798784 | LAYOUT-COMPARATOR, SPLINE 30.44 | 1 | |
| 6798845 | PULLER TURBINE SECOND STAGE SPLINED ADAPTER | 1 | |
| 6798981 | ADAPTER - SPLINED | 1 | |
| 6799536 | Wrench â Spanner, Prop Break Outer Member Assy Retaining Nut (Spline) | 1 | |
| 6799576 | GAGE,PD DIAL BORE INTERNAL SPLINE | 2084 | |
| 6799577 | GAGE,PD DIAL BORE INTERNAL SPLINE | 1 | |
| 6799578 | Gage Kit â P D Dial Bore, Internal Spline (with storage case) | 1 | |
| 6799579 | GAGE,PD DIAL BORE INTERNAL SPLINE | 1 | |
| 6799783 | Gage Kit â Retractable Dial Snap, External Spline P.D. | 1 | |
| 6799784 | Gage Kit â Retractable Dial Snap, External Spline P.D. | 1 | |
| 6799822 | Wrench â Spline Nut, Front Planet Journal Retaining | 2 | |
| 6872245 | INTERNAL SPLINE GAGE | 2084 | |
| 6872593 | GAGE - IMPELLER INTERMAL SPLINE | 1 | |
| 6889891 | HOLDER - COMPRESSOR ROTOR SPLINED | 1 | |
| 6889894 | SPLINED POWER TURBINE HOLDER | 2084 | |
| 6891195 | PULLER - COMPRESSOR ROTOR SPLINED ADAPTER | 1 | |
| 6891351 | WRENCH, GP TU SPLINED | 1 | |
| 6891390 | GAGE - SPLINE, STARTER GENERATOR | 1 | |
| 6893357 | 32/64 PITCH 27 TOOTH SPLINE HOLDING WRENCH | 2084 | |
| 6893397 | INSTALL FUEL PUMP SPLINED ADAPTER BEARING DRIFT | 2084 | |
| 6893503 | Spline Gage | 2 | |
| 6897868 | PULLER - SPLINED ADAPTER | 1 | |
| 9300922 | HEAD ALIGNMENT TOOL SPLINE | 1 | |
| 65058094 | SPLINE WRENCH | 1 | |
| 7-562100057-001 | GENERATOR SPLINE | 1 | |
| 70001-T1 | Spline Wrench | 1 | |
| 70001T1 | EXTENSION SPLINED WRENCH | 1 | |
| 71310001 | 906/1-M5/M6 REMOVALPINS&SPLINED NUTS | 1 | |
| 75130T3 | SPLINE WRENCH | 1 | |
| 75146T003 | SPLINE WRENCH | 1 | |
| 75221185 | TORQUE ADAPTER 11/16" SPLINE DRIVE | 1 | |
| 75221668 | TORQUE ADAPTOR 11/16" SPLINE DRIVE "SPECIAL" | 1 | |
| 75416-T1 | TORQUE ADAPTER AND SPLINE WRENCH | 1 | |
| 75416T003 | SPLINE SOCKET SETSCREW TORQUE WRENCH ADAPTER | 1 | |
| 75416T1 | SPLINE WRENCH AND TORQUE ADAPTER | 1 | |
| 75416T3 | Spline Wrench | 1 | |
| 8221381-01 | ADAPTER - STATIONARY INNER SPLINE | 1 | |
| 831411-1 | SEAL ROTOR AND SPLINED ADAPTER REMOVAL/ INSTALLATION KIT (CONSISTS OF 831411-11 SEAL PULLER, 831411-13 SEAL INSTALLER, AND 831411-15 SPLINE PULLER) | 1 | |
| 831411-117 | ENGINE SPLINE ADAPTER REMOVAL TOOL | 1 | |
| 831411-15 | SPLINE PULLER | 2084 | |
| 831411-2 | SEAL ROTOR & SPLINE ADAPTER | 1 | |
| 831412-1 | SPLINE WEAR INDICATOR KIT | 1 | |
| 833978-9 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 834268-1 | INTERNAL SPLINE SPANNER WRENCH | 1 | |
| 856A1070 | FIXTURE, SPLINE BOLT REMOVAL | 1 | |
| 856A1070 G01 | Fixture Removal ‐ Spline Bolt | 1 | |
| 856A1070G01 | FIXTURE SPLINE BOLT | 1 | |
| 856A1070G02 | FIXTURE, SPLINE BOLT REMOVAL | 1 | |
| 856A1070G03 | FIXTURE, SPLINE BOLT REMOVAL | 1 | |
| 856A1070P03 | FIXTURE, SPLINE BOLT REMOVAL | 1 | |
| 856A1426P06 | Spline Wrench | 1 | |
| 856A1431G02 | FIXT SPLINED BOLT REMOVAL | 1 | |
| 856A1604 | FIXTURE, SPLINE BOLT REMOVAL | 1 | |
| 856A1604G01 | Fixture Splined Bolt Remove | 1 | |
| 856A1604G02 | FIXT. SPLINED BOLT REM | 1 | |
| 856A3471 | ADAPTER-DRIVE SPLINES FUEL PUMP ROTATION CHECK | 1 | |
| 856A3471 G01 | Drive Spline | 1 | |
| 856A3471 P01 | Drive Spline | 2 | |
| 856A3471P01 | Drive Spline | 2 | |
| 856A3471P02 | DR SPLINE ADPT FUEL PUMP | 6 | |
| 856A3796-26 | SPLINE PLUG W/ INSTALLER,REMOVER | 1 | |
| 856A3802 | PUSHER, BALL BRG. HANDCRANK SPLINED SHAFT | 1 | |
| 856A3802 REV A | PUSHER, BALL BRG. HANDCRANK SPLINED SHAFT | 1 | |
| 856A3802P01 | PUSHER, HANDCRANK SPLINED SHAFT | 1 | |
| 856AI070 | FIXTURE, SPLINE BOLT REMOVAL | 1 | |
| 8812954000 | SPLINE PROTECTOR | 1 | |
| 8816183132 | SPLINED SLEEVE | 1 | |
| 8816183133 | SPLINED BUSH | 1 | |
| 8G7100G07831 | SPLINE WRENCH | 1 | |
| 90118-19-T3 | SPLINE TOOL | 1 | |
| 908C714-1 | SPLINE WRENCH | 1 | |
| 92700-10753-055 | VESPEL SPLINE ADAPTER TOOL KIT | 1 | |
| 928A678-1 | SPLINE WRENCH | 1 | |
| 93893-3380PS | SP SERIES INTERNAL SPLINE TOOLS | 1 | |
| 9413M30 | WRENCH, RATCHETING BOX END SPLINE | 1 | |
| 9441M42 | ADAPTER, SPLINE, TORQUE | 1 | |
| 9441M42 REV B | ADAPTER, SPLINE, TORQUE | 1 | |
| 9441M47 | ADAPTER, SPLINE | 1 | |
| 9441M47 REV B | ADAPTER, SPLINE | 1 | |
| 9441M51 | ADAPTER, SPLINE TORQUE NUT | 1 | |
| 9441M51 REV B | ADAPTER, SPLINE TORQUE NUT | 1 | |
| 9441M52 | PLUG, SPLINED-TORQUE | 1 | |
| 9441M52 REV B | PLUG, SPLINED-TORQUE | 1 | |
| 9450M11 | SPLINE SOCKET | 1 | |
| 9450M14P01 | SOCKET,SPLINE - NO 14 | 1 | |
| 9480M58P07 | Adapter, Spline | 1 | |
| 9480M58P36 | Expander, Spline | 1 | |
| 9560006600 | NAIL,SPLINED | 1 | |
| 9560174200 | NAIL,SPLINED | 1 | |
| 9562610170 | NAIL,SPLINED | 1 | |
| 9564910240 | SPLINED PIN | 1 | |
| 956A3319G01 | Adapter,spline-torque angle calibration | 1 | |
| 956A6241 | DRIVE SPLINE ADAPTER - TGB | 1 | |
| 956A6241P01 | Adapter drive splines bevel gear tgb | 1 | |
| 956A6288 | DRIVE SPLINE ADAPTER - AGB | 1 | |
| 956A6288P01 | Adapter,Drive Splines-Bevel Gear,Agb | 1 | |
| 956A8931 | ADAPTER - DRIVE SPLINES - GEAR - TGB/AGB | 1 | |
| 956A8931G01 | Adapter，drive splines-gear，TGB/AGB | 1 | |
| 983-9138-750 | TIEROD TIE-ROD SPLINE CHECK AND GO/NO- | 1 | |
| 985-92-03-901 | A/P SPLINE ADAPETR | 1 | |
| 985.92.03.901 | SPLINE ADAPTOR, AUTOPILOT | 1 | |
| 985.92.03.903 | SPLINE ADAPTER | 1 | |
| 985.L92.03.901 | SPLINE ADAPTER, AUTO PILOT | 1 | |
| 98A27508058000 | Spline Drive | 1 | |
| 98A27508061000 | Spline Drive | 1 | |
| 98A32403001000 | SPLINE DRIVE | 1 | |
| 98A32404001000 | Spline Adaptor | 1 | |
| 98A78303500000 | SPLINE DRIVE TOOL | 1 | |
| 98D27804001000 | SPLINE TOOL | 18 | |
| 98F32104022000 | DRIVE-SPLINED | 1 | |
| 98F32404001000 | DRIVE-SPLINED (WHEEL TACHO) | 5 | |
| 98L32404000000 | DRIVE, SPLINED - WHEEL TACHO | 3 | |
| 99-PS-60 | SPLINE SET | 2084 | |
| 99PS-60 | SPLINE SOCKET SET | 2084 | |
| 99PS60 | BRISTOL MULTI-SPLINE SOCKET SD 11 PC | 2084 | |
| 9C1079 | PROTECTOR,THREAD/SPLINE LPT | 1 | |
| A27061-47 | SPLINED SHAFT | 1 | |
| A27062-2 | Spline Adapter | 1 | |
| A27071-54 | SPLINE ASSEMBLY | 1 | |
| A27078-1 | ADAPTER SPLINE GEAR | 1 | |
| A27078-2 | ADAPTER SPLINE | 1 | |
| A27078-3 | ADAPTER SPLINE | 1 | |
| A27078-4 | ADAPTER SPLINE | 1 | |
| A27078-5 | Spline adapter | 1 | |
| A27078-7 | SPLINE ADAPTERS - LEADING EDGE SLAT DRIVE ROTARY ACTUATORS AND GEARBOXES | 1 | |
| A27078-8 | ADAPTER SPLINE | 1 | |
| A27117-1 | SPLINE DRIVE TOOL | 3 | |
| A27117-4 | SPLINE ADAPTER | 1 | |
| A32026-44 | SPLINE WRENCH | 1 | |
| A32026-49 | SPLINE WRENCH | 1 | |
| A52034-3 | SPLINE SOCKET -0 WELDMENT | 1 | |
| A52034-7 | SPLINE ADAPTER | 1 | |
| A681248 | SPLINED SOCKET | 1 | |
| A71034-3 | SPLINE WRENCH | 2 | |
| ADVANCE MFG. CO.INC / AHX-T550 | YDRAULIC TORQUE WRENCH CAPACITY: 80,000 FT-LBS 960,000 IN-LBS CENTER DRIVE # 43 SPLINE COUNTER TORQUE: 2 PIN-1.00 DIA 15.25" BOLT CIRCLE INCLUDE: HYDRAULIC HANDPUMP | 1 | |
| AE1602A12T520 | SPLINED END ASSEMBLY TOOL | 1 | |
| AEM9793 | HAR DAV 6 SPLINE CRKNSHFT WR | 1 | |
| AEM9794 | HAR DAV 10 SPLINE CRNKSHFT WR | 1 | |
| AGE-12928 | SOCKET - SPLINED - APS2300 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| AGE10021 | Spline Wrench | 1 | |
| AGE10068 | WRENCH, SPLINE | 1 | |
| AGE11031 | SPLINE WRENCH | 1 | |
| AGE12093 | SPLINE WRENCH .600-12 INTERNAL SPLINE | 1 | |
| AGE12605 | SPLINE HOLDER | 1 | |
| AGE12702 | Spline Inspection Gauge | 1 | |
| AGE12927 | WRENCH - SPLINED | 1 | |
| AGE12928 | SOCKET - SPLINED | 1 | |
| AGE13164 | SPLINE ADAPTER | 1 | |
| AGE13487 | Spline Adapter (Part of AGE13483 and AGE13488) | 1 | |
| AGE13585 | INPUT SHAFT SPLINE WRENCH | 1 | |
| AGE13588 | TOOL, SPLINE, ALIGNMENT | 1 | |
| AGE14922 | No-go Spline Gauge | 1 | |
| AGE15808 | DRIVER, SPLINE | 1 | |
| AGE15831 | Spline Adapter | 1 | |
| AGE15832 | SPLINE, DRIVER | 1 | |
| AGE15834 | SPLINE ADAPTER | 1 | |
| AGE19524 | ADAPTOR / SPLINE | 2084 | |
| AHX-T550 | HYDRAULIC TORQUE WRENCH CAPACITY 80,000 FT-LBS 960,000 IN.LBS CENTRE DRIVE #43 SPLINE COUNTER TORQUE: 2 PIN-1.00 DIA 15.25" BOLT CIRCLE. INCLUDE: HYDRAULIC HAND PUMP. BRAND ADVANCE MFG.CO.INC | 1 | |
| AK706 | SPLINE SOCKET KIT | 2084 | |
| ANHC1721 | 20 TOOTH SPLINE SKT 3/4IN DR | 2084 | |
| AO102081 | Mandrel and base assy (Splined sleeve pressing) | 1 | |
| ATISK3686-2T | SOCKET 8 OCTAGONAL SPLINE | 1 | |
| ATISK3686-3T | SOCKET-8 SPLINE-OCT-#10 | 1 | |
| ATISK3686-4T | SOCKET-8 SPLINE-OCT-1/4IN | 1 | |
| ATISK3686-5F | SOCKET-8 SPLINE-OCT-5/16IN | 1 | |
| ATISK3686-6F | SOCKET-8 SPLINE-OCT-3/8IN | 1 | |
| ATISK3686-7S | SOCKET-8 SPLINE-OCT-7/16IN | 1 | |
| ATISK3686-8S | SOCKET-8 SPLINE-OCT-1/2IN | 1 | |
| ATISK3686-9S | SOCKET-8 SPLINE-OCT-9/16IN | 1 | |
| ATISK368610S | SOCKET-8 SPLINE-OCT-5/8IN | 1 | |
| ATSK3686-2T | #8 SPLINE SOCKET | 1 | |
| ATSK3686-3T | #10 SPLINE SOCKET | 1 | |
| ATSK3686-4T | 5/16IN SPLINE SOCKET | 1 | |
| ATSK3686-5F | 5/16IN SPLINE SOCKET | 1 | |
| ATSK3686-6F | 3/8 SPLINE SOCKET | 1 | |
| B-21761 | Coupling, spline | 1 | |
| B27028-6 | EXTERNAL SPLINE | 1 | |
| B27028-7 | INTERNAL SPLINE(2 IT) | 1 | |
| B27036-18 | SPLINE WRENCH | 1 | |
| B27038-10 | GEAR SPLINE WRENCH ASSY | 1 | |
| B27038-23 | GEAR SPLINE WRENCH ASSY | 1 | |
| B27038-33 | COUPLING SPLINE WRENCH | 1 | |
| BOESR10 | WRNCH COMB RAT REV 10 SPLINE | 1 | |
| BOESR11 | WRNCH COMB RAT REV 11 SPLINE | 1 | |
| BOESR12 | WRNCH COMB RAT REV 12 SPLINE | 1 | |
| BOESR14 | WRNCH COMB RAT REV 14 SPLINE | 1 | |
| BOESR16 | WRNCH COMB RAT REV 16 SPLINE | 1 | |
| BOESR18 | WRNCH COMB RAT REV 18 SPLINE | 1 | |
| BOESR20 | WRNCH COMB RAT REV 20 SPLINE | 1 | |
| BOESR22 | WRNCH COMB RAT REV 22 SPLINE | 1 | |
| BOESR24 | WRNCH COMB RAT REV 24 SPLINE | 1 | |
| BOESR26 | WRNCH COMB RAT REV 26 SPLINE | 1 | |
| BOESR28 | WRNCH COMB RAT REV 28 SPLINE | 1 | |
| BOESR30 | WRNCH COMB RAT REV 30 SPLINE | 1 | |
| BOESR32 | WRNCH COMB RAT REV 32 SPLINE | 1 | |
| BOESR7 | WRNCH COMB RAT REV NO.7 SPLINE | 1 | |
| BOESR8 | WRNCH COMB RAT REV NO.8 SPLINE | 1 | |
| BOESR9 | WRNCH COMB RAT REV NO.9 SPLINE | 1 | |
| BPOERMSP10 | SPLINE RATCHETING WRENCH 10MM | 1 | |
| BPOERMSP11 | SPLINE RATCHETING WRENCH 11MM | 1 | |
| BPOERMSP12 | SPLINE RATCHETING WRENCH 12MM | 1 | |
| BPOERMSP13 | SPLINE RATCHETING WRENCH 13MM | 1 | |
| BPOERMSP14 | SPLINE RATCHETING WRENCH 14MM | 1 | |
| BPOERMSP15 | SPLINE RATCHETING WRENCH 15MM | 1 | |
| BPOERMSP16 | SPLINE RATCHETING WRENCH 16MM | 1 | |
| BPOERMSP17 | SPLINE RATCHETING WRENCH 17MM | 1 | |
| BPOERMSP18 | SPLINE RATCHETING WRENCH 18MM | 1 | |
| BPOERMSP19 | SPLINE RATCHETING WRENCH 19MM | 1 | |
| BPOERMSP8 | SPLINE RATCHETING WRENCH 8MM | 1 | |
| BPOERMSP9 | SPLINE RATCHETING WRENCH 9MM | 1 | |
| C17698-0101 | NO 38 SPLINE LEFT HAND WRCH | 1 | |
| C17698-0102 | 1 3/6 SPLINE SOCKET" | 1 | |
| C17698-103 | 7/8 SPLINE SOCKET | 1 | |
| C17698-104 | 7/8: SPLINE SOCKET, | 1 | |
| C17698-109 | 1 SPLINE SOCKET | 1 | |
| C17698-110 | 1 SPLINE SOCKET | 1 | |
| C17698-201 | SPLINE NUT TOOL ADAP | 1 | |
| C27041-5 | SPLINED END | 1 | |
| C49001-19 | ADPTER-SPLINE | 1 | |
| C651G3005101 | EXTRACTOR FOR SPLINED FLANGE/BEARING | 1 | |
| C651G3006101 | STORAGE FOR SPLINED FLANGE/BEARING | 1 | |
| CARGO-SPLINE-WRENCH | CARGO SPLINE WRENCH TOOL | 1 | |
| CH1062-040 | SPLINE SOCKET | 1 | |
| CH1062-169 | SPLINE HOLDER | 1 | |
| CH696-060 | SPLINED PLUG ADAPTOR | 1 | |
| CH700-196 | SPLINED PLUG ADAPTER | 1 | |
| CH705-334 | SPLINED ADAPTER | 1 | |
| CH712-192 | SPLINE ALIGNMENT | 1 | |
| CH712-193 | SPLINE ALIGNMENT | 1 | |
| CH716-125 | SPLINED PLUG ADAPTER | 1 | |
| CHA1062-040 | SPLINE SOCKET | 1 | |
| CHA700-375 | FEMALE SPLINE SPANNER | 1 | |
| CHA712-192 | SPLINE ALIGMENT PLUG | 1 | |
| CHA713-258 | SPLINE ALIGNMENT PLUG | 1 | |
| CHA717-253 | SPLINED ADAPTER | 1 | |
| CMMT12016 | SQUARE SPLINED SOCKET SET | 1 | |
| CMMT12047 | SPLINED SOCKET SET | 2084 | |
| CP30598-3 | EXTRACTOR SPLINE BUSH FROM IDG DRIVE SHAFT | 1 | |
| CPWA-30857 | Wrench, splined | 1 | |
| CSM260-20 | SLAVE SPLINED SHAFT | 1 | |
| CSM260-20-21 | SLAVE SPLINED SHAFT | 1 | |
| CSRS603-3 | SPANNER WRENCH, 8-SPLINE, CURVED, #10 | 1 | |
| CSRS603-4 | SPANNER WRENCH, 8-SPLINE, CURVED, ¼” | 1 | |
| DZZ7291-1 | ADAPTOR-TORQUE HORIZ. STAB. SPLINE | 1 | |
| ECSRS603-4 | WRENCH,BASIN;|WRENCH 8 SPLINE 1/4 CRANKED; | 1 | |
| ESRS603-3 | SPANNER WRENCH, 8 SPLINE | 1 | |
| ESRS603-4 | SPANNER WRENCH, 8 SPLINE | 2084 | |
| EVT174-2-6010 | SHAFT SPLINED | 1 | |
| EWS603-10 | SOCKET SPLINED | 1 | |
| EWS603-5 | SOCKET-SPLINED | 1 | |
| EWS603-6 | SOCKET SPLINED ALSO EWS603KIT | 1 | |
| EWS603-7 | SOCKET,SPLINED | 1 | |
| EWS603-8 | SOCKET SPLINED | 1 | |
| EWS603-9 | SOCKET-SPLINED-ALSO EWS603KIT | 1 | |
| EX-83339 | GAGE-NO-GO, POWER TRAIN DRIVE GEAR SPLINE | 2084 | |
| Ex-83339 | Gage-no-go, power train drive gear spline | 1 | |
| F35SPLE23 | 23 TOOTH EXT SPLINE SKT 1/2 DR | 1 | |
| F35SPLI17 | 17 TOOTH SPLINE SKT 1/2 SQ DR | 1 | |
| F70067 | ADAPTER -0 SPLINED SHAFT,INBD.FLAP DRIVE USED TO | 1 | |
| F70190 | ADAPTER 20/40 EXTERNAL SPLINE USED TO KEEP THE | 1 | |
| F70190-1 | STAB TRIM SPLINE ADAPT. ADAPTER, SPLINE 20/40 | 1 | |
| F70300-1 | ADAPTOR FLAPDRIVEFLAPTORQUETUBESPLINEMAN | 13 | |
| F71228 | FLAP T/E GEARBOX COUP. SPLINED WRENCH | 2 | |
| F71228-500 | SPLINED COUPLING WRENCH | 8 | |
| F71252 | ADAPTER - 16/32 INCH SPLINE, 3/4 INCH MALE HEX | 5 | |
| F71267 | SPLINE WRENCH ASSY TOOL | 13 | |
| F7279 | SPLINED WRENCH | 1 | |
| F72797 | Wrench - Control Column Splined | 1 | |
| F80122-12 | Spline Adaptor | 1 | |
| F80122-4 | SPLINE DRIVE ADAPTOR TOOL | 5 | |
| FEL120B | 3/8" DRIVE SAE #12, 3/8" HEX, DEEP SPLINE SOCKET | 2084 | |
| FEL140 | SOCKET SPLINE HEX | 1 | |
| FEL160B | 3/8DR #16-1/2IN DEEP SPLINE | 1 | |
| FEL180B | 3/8" DRIVE SAE #18, 9/16" HEX, DEEP SPLINE SOCKET | 2084 | |
| FEL200B | 3/8" DRIVE SAE #20, 5/8" HEX, DEEP SPLINE SOCKET | 2084 | |
| FELM10B | 3/8DR #10-10MM DEEP SPLINE SKT | 1 | |
| FES120 | SPLINE SOCKET 3/8' | 2084 | |
| FES120B | SOCKET SPLINE SWALLOW, #12, 3/8IN | 2084 | |
| FES14 | TORQUE ADAPTOR, SPLINE, | 2084 | |
| FES140 | SOCKET, SPLINE 7/16 | 2 | |
| FES140B | SOCKET SPLINE SWALLOW, #14, 7/16IN | 2084 | |
| FES160 | SOCKET SPLINE SWALLOW, #16, 1/2IN | 1 | |
| FES160B | 3/8" DRIVE SAE #16, 1/2" HEX, SHALLOW SPLINE SOCKET | 2084 | |
| FES180B | 3/8" DRIVE SAE #18, 9/16" HEX, SHALLOW SPLINE SOCKET | 1 | |
| FES200B | 3/8" DRIVE SAE #20, 5/8" HEX, SHALLOW SPLINE SOCKET | 2084 | |
| FESU140 | SOCKET, SPLINE, UNIV | 1 | |
| FRES10 | Torque Adaptor, Spline, no.10, 5/16" | 3 | |
| FRES12 | 3/8" SPLINE TORQUE ADAPTOR | 4 | |
| FRES14 | Torque Adaptor, Spline - 3/8" Drive, #14 - 7/16" | 5 | |
| FRES16 | SNAP-ON - TORQUE ADAPTOR, SPLINE, #16, 1/2 IN. HEX | 1 | |
| FRES18 | SNAP-ON - TORQUE ADAPTOR, SPLINE, #18, 9/16 IN. HEX | 3 | |
| FRES20 | SNAP-ON - TORQUE ADAPTOR, SPLINE, #20, 5/8 IN. HEX | 2 | |
| FRES22 | SNAP-ON - TORQUE ADAPTOR, SPLINE, #22, 11/16 IN. HEX | 1 | |
| FRES24 | SNAP-ON - TORQUE ADAPTOR, SPLINE, #24, 3/4 IN. HEX | 1 | |
| FRES7 | SNAP-ON - TORQUE ADAPTOR, SPLINE, #7, 7/32 IN. HEX | 2 | |
| FRES8 | Torque Adaptor, Spline, no.8, 1/4" Hex | 1 | |
| FRES9 | SNAP-ON - TORQUE ADAPTOR, SPLINE, #9, 9/32 IN. HEX | 1 | |
| FRESL14 | TORQ ADPT SPLINE 7/16 LOW PROF | 1 | |
| FRESL16 | TORQ ADPT SPLINE 1/2 LOW PROFI | 1 | |
| FRESL24 | TORQ ADP,SPLINE 3/4IN LOW PROF | 1 | |
| FRESL28 | TORQ ADP,SPLINE 7/8IN LOWPROFL | 1 | |
| FRESM7A | 3/8IN SPLINE TORQUE ADAPTER | 1 | |
| G22002 | SPLINE ALIGNMENT GUIDE -0 AUTOTHROTTLE | 1 | |
| G22002-1 | SPLINE ALIGNMENT GUIDE - AUTOTHROTTLE | 1 | |
| G27011 | SPLINE ADAPTER -0 TORQUE SENSOR, INBD & OUTBD TE | 1 | |
| G27011-1 | SPLINE ADAPTER - TORQUE SENSOR, INBOARD AND OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| G27020 | SPLINE ADAPTER -0 OUTBD XMSN, INBD T.E. FLAP | 1 | |
| G27020-1 | SPLINE ADAPTER - OUTBOARD TRANSMISSION, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| G27034 | SPLINE ADAPTER -0 ANGLE GEARBOX DRIVE, INBD TE | 1 | |
| G27034-1 | SPLINE ADAPTER - ANGLE GEARBOX DRIVE, INBOARD TRAILING EDGE FLAP | 1 | |
| G27091-1 | SPLINE ADAPTERS - ANGLE GEARBOX DRIVE, INBOARD AND OUTBOARD TRAILING EDGE FLAPS | 1 | |
| G27094-1 | SPLINE ADAPTERS - SUPPORT ASSEMBLY, TORQUE TUBE | 1 | |
| G27094-4 | Spline adapter | 1 | |
| G52001 | SPLINE WRENCH -0 UPPER DECK DOOR, TYPE "A" | 1 | |
| G52001-6 | SPLINE WRENCH | 1 | |
| G52001-8 | SPLINE WRENCH - UPPER DECK DOOR, TYPE A | 1 | |
| G52001-8-M | SPLINE WRENCH | 1 | |
| G603311 | SPLINE GAUGE | 1 | |
| G647296 | Spline Gauge | 1 | |
| G700-282002-1-REVNC-FAB | FABRICATION SPLINE CHEZ AVITEC MAT SS304 | 1 | |
| GE-FQAP-352 | FAN MIDSHAFT SPLINE KIT | 1 | |
| GFEL220 | 22 SPLINE DEEP SKT 3/8 SQ DR | 1 | |
| GFEL220NP | 22 SPLINE DEEP SKT 3/8 SQ DR | 1 | |
| GFEL280 | DEEPWELL SKT3/8 DR SPLINE | 1 | |
| GFEL280NP | DEEPWELL SKT3/8 DR SPLINE | 1 | |
| GFRES10NP | 5/16 NO.10 SPLINE TQ APTR 3/8 | 1 | |
| GG98678 | SPLINE GAUGE | 1 | |
| GS10281 | PULLER, SPLINED SPACER | 1 | |
| GS13302-1 | ADAPTER, SPLINED | 1 | |
| GS13306-1 | SPLINE FIXTURE | 1 | |
| GS13322-1 | ADAPTER SPLINED | 1 | |
| GS13324-1 | FIXTURE SPLINE | 1 | |
| GS13335-1 | GUIDE, SPLINE | 1 | |
| GS13833-1 | SPLINE WRENCH | 1 | |
| GS13966-1 | GAGE,N1, SPLINE WEAR | 1 | |
| GS14807 | SPLINE GAGE | 1 | |
| GS14807-1 | GAGE, #60-SPLINE, NO-GO | 2084 | |
| GS20182-1 | HOLDER,SPLINE | 1 | |
| GS23485-2 | PCU TORQUE SPLINE DRIVE CHECK | 12 | |
| GSE-383 | SPLINE TORQUE ADAPTER | 1 | |
| GSE234 | SPLINE ADAPTER - TORQUE TUBE | 1 | |
| GSE2720135 | SPLINE ADAPTER | 1 | |
| GSE2720136 | SPLINE ADAPTER | 1 | |
| GSE2720137 | SPLINE ADAPTER | 1 | |
| GSE2720138 | SPLINE ADAPTER | 1 | |
| GSE2720570 | SPLINED FLAP DRIVE ADAPTER KIT | 1 | |
| GSE383 | SPLINE TORQUE ADAPTOR | 1 | |
| GSE4900494 | SPLINE ADAPTER REMOVAL TOO | 1 | |
| GSE4900495 | ALTERNATE: SPLINE ADAPTER INSTALLATION TOOL | 1 | |
| GSE4920821 | SPLINE ADAPTER INSTALLATION TOOL | 1 | |
| GSEL361NP | DEEPWELL SKT1/2 DR SPLINE | 1 | |
| GU30411 | EXTRACTOR SPLINE BUSH FROM IDG DRIVE SHAFT | 1 | |
| GXDES1214A | 3/8 X 7/16 SPLINE SPANNER | 1 | |
| GXDES1820ANP | WRENCH-BOX NO.18 AND 20 SPLINE | 1 | |
| GXDES38TL16 | #38 SPLINE WRENCH 16" HANDLE | 1 | |
| HS8260 | PULLER-MECH. SPLINED LOCK TUBE | 1 | |
| HS8268 | WRENCH-SPLINED, PROP RET NUT | 1 | |
| HSP1617 | GAGE #51 SPLINE NO GO | 1 | |
| HSP1765 | SPIDER SPLINE NO-GO GAGE | 1 | |
| HST3006-604-3 | TORQUE WRENCH, 8 SPLINE | 1 | |
| HST3008-604-3 | TORQUE WRENCH, 8 SPLINE | 1 | |
| HT288917 | ELECTRICAL TRIMMING SPLINE | 1 | |
| HTET720330 | SPLINED ADAPTOR | 1 | |
| HU26895 | Fuel Spline crow foot | 1 | |
| HU36988 | Splined Socket（Lock Ring) | 1 | |
| HU37631 | LOADING TOOL-SPLINED NUT, LP COMPRESSOR | 1 | |
| HU81880 | VSCF SPLINE WEAR GAUGE | 1 | |
| IAE 1P16052 | IAE 1P16052 SPLINE ALIGNER | 1 | |
| IAE1P16052 | ALIGNER, SPLINES | 1 | |
| ID5079-82 | EXPANDING SPLINE | 1 | |
| IMD482 | SPLINED SOCKET | 2084 | |
| IMFES14 | SOCKET, SPLINE, IMPA | 1 | |
| IMFES22 | NO22 SPLINE IMP SKT 3/8 DR | 1 | |
| IMFES22NP | NO22 SPLINE IMP SKT 3/8 DR | 1 | |
| IMSES18TW | 9/16 SPLINE TW IMP SKT 1/2 DR | 1 | |
| IW1000MH-5S | H.D. 5 SPLINE ANVIL IMPACT WR | 1 | |
| J22002-1 | Spline Wrench - Gearbox, Autothrottle Control Stand | 1 | |
| J22002-1-M | SPLINE WRENCH-GEARBOX | 1 | |
| J22002-2 | SPLINE WRENCH | 1 | |
| J27015-1 | SPLINE ADAPTER - LE/TE POWER DRIVE UNIT, MANUAL DRIVE | 1 | |
| J27015-1-M | SPLINE ADAPTER | 1 | |
| J27015-2 | SPLINE ADAPTER | 1 | |
| J27021-3 | SPLINE DRIVE ADAPTOR | 1 | |
| J27058-21 | Spline cover | 1 | |
| J27058-23 | Spline Cover | 1 | |
| J27058-24 | Spline cover | 1 | |
| J27067-93 | WRENCH SPLINE | 1 | |
| J32055-12 | Spline Vice | 1 | |
| J57011-1 | Spline protector-aft hinge pin，polding wing tip，removal and installation | 1 | |
| JRC1623 | NO.14 SPLINE SOCKET 1/2 DR | 1 | |
| JSCV08 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/4) | 2084 | |
| JSCV09 | CIRCIRLI SPLINE KOMBINE ANAHTAR 9/32 | 2084 | |
| JSCV10 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/16) | 2084 | |
| JSCV11 | CIRCIRLI SPLINE KOMBINE ANAHTAR 11/32 | 2084 | |
| JSCV12 | REVERSIBLE RATCHETING WRENCHES - SPLINE | 2084 | |
| JSCV14 | REVERSIBLE RATCHETING WRENCHES - SPLINE | 2084 | |
| JSCV16 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/2) | 2084 | |
| JSCV20 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/8) | 2084 | |
| JSCV22 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 11/16) | 2084 | |
| JSCV24 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 3/4 ) | 2084 | |
| JSCV26 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 13/16) | 2084 | |
| JSCV32 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1) | 2084 | |
| JSCV34 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/16) | 2084 | |
| JSCV36 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/8) | 2084 | |
| JSCV40 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/4) | 2084 | |
| JT8 SERVICE | JT8 SPLINE CAVITY SERVICE | 1 | |
| K1578LH | NO.14 SPLINE SPECIAL WRENCH | 1 | |
| K1579 | #12 SPLINE WR | 1 | |
| K1580LH | 28 7/8 SPLINE WRENCH LH BEND | 1 | |
| K1580RH | NO 28 (7/8) SPLINE WR RH BEND | 1 | |
| K2308-01 | 12 3/8 SPLINE TRQ ADPTR 1/2 | 1 | |
| K2310C | NO 12 SPLINE RATCHET TQAD | 1 | |
| K24001-114 | VFSG SPLINE ADAPTER ALIGNMENT TOOL | 2084 | |
| K24001-98 | VFSG SPLINE ADAPTER ALIGNMENT TOOL | 1 | |
| K27028 | Spline Adapter -Leading Edge/Trailing Edge Power Drive Unit. Manual Drive | 1 | |
| K27028-1 | SPLINE ADAPTER - LEADING EDGE TRAILING EDGE PWR DR | 1 | |
| K27030-1 | ADAPTER EQUIPMENT - SPLINE | 2084 | |
| K27030-2 | SPLINEADAPTEREQPT | 1 | |
| K27030-95 | Spline Adapter Eqpt | 1 | |
| K27030-99 | ADAPTER EQUIPMENT - SPLINE | 2084 | |
| KIT E | KIT E (W/CASE) MODELS 47/206/204/205/212 SPLINE MEASURING KIT (BELL 206B) | 1 | |
| KIT E W/ CASE | KIT-MEASURING PIN, GEAR TEETH, AND SPLINE | 1 | |
| L44627P05 | SPLINED ADAPTER | 1 | |
| L44627P05L44627P06 | SPLINED ADAPTER CONDITION-NEW/OHC MANUFACTURER GE | 1 | |
| L44627P06 | SPLINED ADAPTER | 1 | |
| LES242B | 3/4DR 24-3/4 SHAL SPLINE | 1 | |
| LES262B | 3/4DR 26-13/16 SHAL SPLINE | 1 | |
| LES282 | 3/4DR 28-7/8 SHAL SPLINE | 1 | |
| LES282B | 3/4DR 28-7/8 SHAL SPLINE | 1 | |
| LES302 | 3/4DR 30-15/16 SHAL SPLINE | 1 | |
| LES302B | 3/4DR 30-15/16 SHAL SPLINE | 1 | |
| LES322B | 3/4DR 32-1IN SHAL SPLINE | 1 | |
| LES323B | 1DR 32-1IN SPLINE SKT | 1 | |
| LES342 | 1 1/16 SPLINE 3/4 DRIVE, SHALLOW (#34) | 2084 | |
| LES342B | 3/4DR 34-1-1/16 SHAL SPLINE | 1 | |
| LES343 | 1IN DR 34-1-1/16 SHAL SPLINE | 1 | |
| LES343B | 1IN DR 34-1-1/16 SHAL SPLINE | 1 | |
| LES362B | 3/4DR 36-1-1/8 SHAL SPLINE | 1 | |
| LES383 | SPLINE SOCKE | 1 | |
| LES383B | 1IN DR 38-1-3/16 SHAL SPLINE | 1 | |
| LES443 | NO.44 SPLINE HND SKT 1IN SQ DR | 1 | |
| LES483 | NO.48 SPLINE SOCKET 1IN DR | 1 | |
| LES642 | NO. 64 SPLINE SKT 3/4IN SQ. DR | 1 | |
| LL517A034 | SPLINED PLUG 5100 | 1 | |
| LTCT14604-02 | Fixture, Input Spline Wrench and Torque | 1 | |
| LTCT14679 | 62. GAGE PLUG SPLINE | 1 | |
| LTCT14791-01 | Gear Separator Rotating Spline Assembly | 1 | |
| LTCT1731 | SPLINE ASSY | 1 | |
| LTCT3929-02 | SPLINE ASSY | 1 | |
| LTCT5484 | Spline Handle | 1 | |
| LTCT6917 | GAGE SPLINE | 1 | |
| M47910-6/32 | SPLINED NUTSERT INSERT | 2084 | |
| M47920-8/32 | SPLINED NUTSERT INSERT | 2084 | |
| MEST001 | Tool - starter alignment g/box splines | 9 | |
| MIT65B04008-2 | MALE SPLINE | 1 | |
| MIT65B81561 | SPLINE ADAPTER - OUTBOARD FLAP DRIVE | 1 | |
| MIT65B82831 | SPLINED ADAPTER - ENGINE CONTROL, AUTOTHROTTLE CONTROL | 1 | |
| MIT69B82662 | Radars Parts Spline Adaptor | 4 | |
| MS10A | SPLINE WR | 2084 | |
| MS27404-3D | ADAPTER - SPLINE CAVITY | 2084 | |
| MS2A | SPLINE WRENCH | 2084 | |
| MS3A | SPLINE WRENCH | 2084 | |
| MS4A | SPLINE WRENCH | 2084 | |
| MS5A | SPLINE WRENCH | 2084 | |
| MS6A | SPLINE WRENCH | 2084 | |
| MS7 | Multi-spline Wrench | 1 | |
| MS7A | SPLINE WRENCH | 2084 | |
| MS8A | SPLINE WR | 2084 | |
| MV8527X08 | ADAPTER SPLINE | 1 | |
| N8909A2 | NO36 SPLINE SOCKET W/1-1/8IN | 2084 | |
| NTG2604D | SPLINE DRIVE SOCKET 20 TEETH PITCH DIAMETER 0.0625 (5/8”) 32/64 PITCH FRACTION CLASS A. | 5 | |
| OES10B | WRENCH, SPLINE, COMB | 1 | |
| OES20B | WRENCH, SPLINE, COMB | 1 | |
| OES709K | SPLINE WRENCHES-1/4 THRU 1 INCH | 1 | |
| PBS37782 | SPLINE WRENCH | 1 | |
| PD2657 | SOKER SPLINED REAC. | 1 | |
| PE4727 | TOOL SPLINED | 1 | |
| PF53175 | WETSPLINE ADAPTER | 2 | |
| PF53361-2P | DISPENSER - ENGINE, CSD, AND STARTER OIL; 2 GAL. CAPACITY WITH PUMP; 7 FT. HOSE; OMP COUPLING WITH 53175 CSD WET SPLINE (MALABAR INTERNATIONAL) | 1 | |
| PRESSOL 12935 | SYRINGE CFM56 CSD SPLINE CAVITY SERVICE | 1 | |
| PWA 26377 | HOLDER, SPLINED | 2084 | |
| PWA 29989 | ANTI TORQUE SPLINE PLATE | 1 | |
| PWA102726 | GAGE SPLINE WEAR GEARBOX | 1 | |
| PWA10408 | JT8 STARTER / N2 SPLINE TURNER | 3 | |
| PWA17286 | GAGE - ACCESSORY DRIVE SPLINE WEAR | 1 | |
| PWA18872 | Wrench, Torque Hydraulic Spline; 0 - 20000FT/LBS. | 1 | |
| PWA20333 | ADAPTER-SPLINED HYD. WRENCH TO HEX DRIVE WRENCH | 1 | |
| PWA20333 REV A | ADAPTER-SPLINED HYD. WRENCH TO HEX DRIVE WRENCH | 1 | |
| PWA211413 | ADAPTER, ANTI-TORQUE -ENGINE ASSY, MAIN G/BOX IDG SPLINE | 1 | |
| PWA26377 | HOLDER-SPLINES STARTER | 1 | |
| PWA26967 | GAGE - CSD GEARSHAFT SPLINE WEAR | 1 | |
| PWA45186 | SPLINE RETAINER | 1 | |
| PWA45232 | ADAPTER- SWEENEY SWE-8100 TO P&WA SPLINED ADAPTER | 2 | |
| PWA45232 REV NC | ADAPTER- SWEENEY SWE-8100 TO P&WA SPLINED ADAPTER | 1 | |
| PWA45309 | ADAPTER SPLINE ALIGN | 1 | |
| PWA45353 | SPLINE RETAINER HOLD | 1 | |
| PWA45391 | SPLINE RETAINER HOLD | 1 | |
| PWA86220 | GAGE SPLINE WEARSHAFT STARTER DRIVE | 1 | |
| PWA8641 | ADAPTER, HEX TO SPLINE | 2084 | |
| PWA87352 | HOLDER,SPLINED-GEARBOX,DRIVE STARTER COUPLING | 1 | |
| PWC30415 | COMPRESSOR PWCPE30499-50, SPLINE INSERT OLI RELIEF VALVE | 3 | |
| PWC30499 | Gauge Spline Wear (Set of 2 Tools) | 1 | |
| PWC30499-50 | Gauge Spline Wear | 4 | |
| PWC30499-51 | Gauge Spline Wear | 1 | |
| PWC30675 | GAGE, SPLINE WEAR | 3 | |
| PWC30816 | WRENCH, SPLINED STUB SHAFT | 1 | |
| PWC33260 | Splined Turb. | 1 | |
| PWC34041 | RING SPLINE FOR WEAR | 1 | |
| PWC34152 | SPLINE CHECK FOR WEAR | 1 | |
| PWC34941 | WRENCH FOR SPLINED SHAFT | 3 | |
| PWC37267 | Splined Adapter PT Pack | 1 | |
| PWC40535 | DRIFT-SPLINED | 1 | |
| PWC40580 | Adapter-SPLINE,GEARSHAFT | 1 | |
| PWC44167 | DRIVE SHAFT SPLINED | 1 | |
| PWC48271 | SPLINED ANTI-ROTATION BASE | 1 | |
| PWC48372 | DRIVE SHAFT SPLINED | 1 | |
| PWC48468 | SPLINE ADAPTER | 1 | |
| PWC51336 | PLUG SPLINED | 1 | |
| PWC60144-C | Adapter Spline | 1 | |
| PWC61155 | DRIFT (SPLINE ADAPTER INSTALLATION) | 2 | |
| PWC61512 | PULLER (SPLINE ADAPTER REMOVAL) | 2 | |
| PWC70059 | BRIDGE SPLINED SHAFT | 1 | |
| RB 92700-10753-042 | VESPEL SPLINE KIT | 2 | |
| RB KIT 407M | SPLINE MEASURING KIT | 2 | |
| RB KIT A | Model 47 Spline Measuring Kit | 1 | |
| RB KIT B | Model 206 Spline Measuring Kit | 2 | |
| RB KIT C | Model 204/205/212 Spline Measuring Kit | 1 | |
| RB KIT D | Model 47/206 Spline Measuring Kit | 1 | |
| RB KIT E | Models 47/206/204/205/212 Spline Measuring Kit | 3 | |
| RB T101368 | External Spline Input Wrench | 1 | |
| RB T101945 | External Spline Tail Rotor Drive Wrench | 2 | |
| RB T101959 | External Spline Wrench | 1 | |
| RB T101962 | Splined Shaft Holder | 1 | |
| RB T101983 | Internal Spline Wrench | 1 | |
| RB T103006 | Splined Collector Pinnion Quill | 1 | |
| RB T103007 | Wrench, Splined Collector Pinion Nut | 1 | |
| RB T103010 | Splined Adapter | 1 | |
| RB T103024 | Wrench, Splined | 1 | |
| RB T103030 | Mast Torquemeter Gear Splined Wrench | 1 | |
| RB T103138 | Internal Spline Wrench | 1 | |
| RB T103138-101 | Internal Spline Wrench Assembly, Driveshaft Assembly | 1 | |
| RB T103144-101 | Combining Gear Box Internal Spline Wrench Assembly | 1 | |
| RB T103145-101 | Combining Gear Box Internal Spline Wrench Assembly | 1 | |
| RB T103151 | Spline Wrench | 1 | |
| RB T103153 | Combining Gear Box External Spline Wrench | 1 | |
| RB T103153-105 | Combining Gear Box External Spline Wrench | 1 | |
| RB23008673 | Compressor Rotor Spline Adapter | 2 | |
| RB6795588 | Wrench-Holding, 32/64 Pitch 24 Tooth Spline | 2 | |
| RB6798845 | Turbine 2Nd Stage Spline Adapter | 2 | |
| RB6798981 | Prop Shaft Splined Adapter | 1 | |
| RB6889891 | Rotor Splined Compressor Holder | 3 | |
| RB6889894 | Splined Power Turbine Holder | 3 | |
| RB6891195 | Puller, Compressor Rotor Splined Adapter | 1 | |
| RB6891390 | Starter Generator Gearshaft No-Go Spline Gauge | 1 | |
| RB6893357 | 32/64 Pitch 27 Tooth Spline Holding Wrench | 2 | |
| RB6893382 | Compressor Rotor Spline, Concentricity Checking Adapter | 1 | |
| RB6893397 | Install Fuel Pump Splined Adapter Bearing Drift | 2 | |
| RB6897868 | Gasifier Turbine Splined Adapter Puller | 2 | |
| RBA9965 | Arbor, Spline | 2 | |
| RBE117-68021W11 | SPLINE PROTECTOR | 2 | |
| RBEM632V4002101 | SPLINE CHECK GAUGES | 2 | |
| RBKITE | SPLINE MEASURING KIT | 3 | |
| RBT103216-101 | SPLINE WRENCH | 2084 | |
| RBT18003 | SPLINE MEASURING PIN SET | 2 | |
| RBT18659 | Forward & Aft Spline Grease Tool (269 & 300) | 1 | |
| RBW109-3401-19-1 | Support, Tail Rotor Slider And Shaft Splined Plat Check | 2 | |
| RES1214C | SPLINE RATCHETING BOX WRENCH | 1 | |
| RETRACT ACTUATOR SPLINE KIT | RETRACT ACTUATOR SPLINE KIT | 1 | |
| REX104A | EXTRACTOR, MULTI-SPLINE, 1/8" | 1 | |
| REX104C | EXTRACTOR MULTISPLINE 1/8 | 1 | |
| REX104C1 | EXTRACTOR MULTISPLINE 1/8 | 1 | |
| REX105A | EXTRACTOR, MULTI-SPLINE, 5/32" | 1 | |
| REX105C | EXTRACTOR MULTISPLINE 5/32 | 1 | |
| REX105C1 | 5/32IN MULTISPLINE EXTRACTOR | 1 | |
| REX106A | EXTRACTOR, MULTI-SPLINE, 3/16" | 1 | |
| REX106C | EXTRACTOR MULTISPLINE 3/16 | 1 | |
| REX106C1 | 3/16IN MULTISPLINE EXTRACTOR | 1 | |
| REX107A | EXTRACTOR, MULTI-SPLINE, 7/32" | 1 | |
| REX107C | EXTRACTOR MULTISPLINE 7/32 | 1 | |
| REX107C1 | 7/32IN MULTISPLINE EXTRACTOR | 1 | |
| REX108A | EXTRACTOR, MULTI-SPLINE, 1/4" | 1 | |
| REX108C | EXTRACTOR MULTISPLINE 1/4 | 1 | |
| REX108C1 | 1/4IN MULTISPLINE EXTRACTOR | 1 | |
| REX109A | EXTRACTOR, MULTI-SPLINE, 9/32" | 1 | |
| REX109C | EXTRACTOR MULTISPLINE 9/32 | 1 | |
| REX109C1 | 9/32IN MULTISPLINE EXTRACTOR | 1 | |
| REX10B | EXTRACTOR SET, MULTI-SPLINE, 10 PS | 1 | |
| REX110A | EXTRACTOR, MULTI-SPLINE, 5/16" | 1 | |
| REX110C | EXTRACTOR MULTISPLINE 5/16 | 1 | |
| REX110C1 | 5/16IN MULTISPLINE EXTRACTOR | 1 | |
| REX111C | EXTRACTOR MULTISPLINE 11/32 | 1 | |
| REX111C1 | 11/32IN MULTISPLINE EXTRACTOR | 1 | |
| REX112C | EXTRACTOR MULTISPLINE 3/8 | 1 | |
| REX112C1 | 3/8IN MULTISPLINE EXTRACTOR | 1 | |
| REX113C | EXTRACTOR MULTISPLINE 13/32 | 1 | |
| REX114C | EXTRACTOR MULTISPLINE 7/16 | 1 | |
| REX114C1 | 7/16IN MULTISPLINE EXTRACTOR | 1 | |
| REX115C | EXTRACTOR MULTISPLINE 15/32 | 1 | |
| REX115C1 | 15/32IN MULTISPLINE EXTRACTOR | 1 | |
| REX116C | EXTRACTOR MULTISPLINE 1/2 | 1 | |
| REX116C1 | 1/2IN MULTISPLINE EXTRACTOR | 1 | |
| REX117C | EXTRACTOR MULTISPLINE 17/32 | 1 | |
| REX117C1 | 17/32IN MULTISPLINE EXTRACTOR | 1 | |
| REX118C | EXTRACTOR MULTISPLINE 9/16 | 1 | |
| REX118C1 | 9/16IN MULTISPLINE EXTRACTOR | 1 | |
| REX119C | EXTRACTOR -MULTISPLINE 19/32IN | 1 | |
| REX119C1 | EXTRACTOR MULTISPLINE 19/32IN | 1 | |
| REX120C | EXTRACTOR -MULTISPLINE 5/8IN | 1 | |
| REX120C1 | EXTRACTOR MULTISPLINE 5/8IN | 1 | |
| REX121C | EXTRACTOR -MULTISPLINE 21/32IN | 1 | |
| REX121C1 | EXTRACTOR MULTISPLINE 21/32IN | 1 | |
| REX122C | EXTRACTOR -MULTISPLINE 11/16IN | 1 | |
| REX122C1 | EXTRACTOR MULTISPLINE 11/16IN | 1 | |
| REX123C | EXTRACTOR -MULTISPLINE 23/32IN | 1 | |
| REX123C1 | EXTRACTOR MULTISPLINE 23/32IN | 1 | |
| REX124C | EXTRACTOR -MULTISPLINE 3/4IN | 1 | |
| REX124C1 | EXTRACTOR MULTISPLINE 3/4IN | 1 | |
| REX125C | EXTRACTOR -MULTISPLINE 25/32IN | 1 | |
| REX125C1 | EXTRACTOR MULTISPLINE 25/32IN | 1 | |
| REX126C | EXTRACTOR -MULTISPLINE 13/16IN | 1 | |
| REX126C1 | EXTRACTOR MULTISPLINE 13/16IN | 1 | |
| REX127C | EXTRACTOR -MULTISPLINE 27/32IN | 1 | |
| REX127C1 | EXTRACTOR MULTISPLINE 27/32IN | 1 | |
| REX128C | EXTRACTOR -MULTISPLINE 7/8IN | 1 | |
| REX15A | EXTRACTORS, MULTI SPLINE, E-Z OUT/SNAP - ON | 1 | |
| REX15B | MULTISPLINE SET | 2084 | |
| REX25C | SNAP ON 25 PC MULTISPLINE SCREW EXTRACTOR SET | 1 | |
| RRT060843 | INSPECTION GAUGE - SPLINE | 1 | |
| RRT119681-1 | Splined nut&locking ring spanner | 1 | |
| RSE1224 | SPLINE REAR ENGINE MOUNT | 3 | |
| S-033-4 | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) | 1 | |
| S-048-4 | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) (Type: Short) (Major diameter: 0.048") (Flute count: 4) (Add to cart: Contact us to order) | 1 | |
| S-048-4L | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) (Type: Short) (Major diameter: 0.048") (Flute count: 4) (Add to cart: Contact us to order) (Type: Long) (Major diameter: 0.048") (Flute c | 1 | |
| S-048-6 | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) (Type: Short) (Major diameter: 0.048") (Flute count: 4) (Add to cart: Contact us to order) (Type: Long) (Major diameter: 0.048") (Flute c | 1 | |
| S-048-6L | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) (Type: Short) (Major diameter: 0.048") (Flute count: 4) (Add to cart: Contact us to order) (Type: Long) (Major diameter: 0.048") (Flute c | 1 | |
| S-060-6 | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) (Type: Short) (Major diameter: 0.048") (Flute count: 4) (Add to cart: Contact us to order) (Type: Long) (Major diameter: 0.048") (Flute c | 1 | |
| S-060-6L | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) (Type: Short) (Major diameter: 0.048") (Flute count: 4) (Add to cart: Contact us to order) (Type: Long) (Major diameter: 0.048") (Flute c | 1 | |
| S-069-4 | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) (Type: Short) (Major diameter: 0.048") (Flute count: 4) (Add to cart: Contact us to order) (Type: Long) (Major diameter: 0.048") (Flute c | 1 | |
| S-069-4L | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) (Type: Short) (Major diameter: 0.048") (Flute count: 4) (Add to cart: Contact us to order) (Type: Long) (Major diameter: 0.048") (Flute c | 1 | |
| S-072-6 | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) (Type: Short) (Major diameter: 0.048") (Flute count: 4) (Add to cart: Contact us to order) (Type: Long) (Major diameter: 0.048") (Flute c | 1 | |
| S-072-6L | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) (Type: Short) (Major diameter: 0.048") (Flute count: 4) (Add to cart: Contact us to order) (Type: Long) (Major diameter: 0.048") (Flute c | 1 | |
| S-076-4 | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) (Type: Short) (Major diameter: 0.048") (Flute count: 4) (Add to cart: Contact us to order) (Type: Long) (Major diameter: 0.048") (Flute c | 1 | |
| S-076-4L | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) (Type: Short) (Major diameter: 0.048") (Flute count: 4) (Add to cart: Contact us to order) (Type: Long) (Major diameter: 0.048") (Flute c | 1 | |
| S-096-6 | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) (Type: Short) (Major diameter: 0.048") (Flute count: 4) (Add to cart: Contact us to order) (Type: Long) (Major diameter: 0.048") (Flute c | 1 | |
| S-096-6L | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) (Type: Short) (Major diameter: 0.048") (Flute count: 4) (Add to cart: Contact us to order) (Type: Long) (Major diameter: 0.048") (Flute c | 1 | |
| S-111-6 | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) (Type: Short) (Major diameter: 0.048") (Flute count: 4) (Add to cart: Contact us to order) (Type: Long) (Major diameter: 0.048") (Flute c | 1 | |
| S-111-6L | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) (Type: Short) (Major diameter: 0.048") (Flute count: 4) (Add to cart: Contact us to order) (Type: Long) (Major diameter: 0.048") (Flute c | 1 | |
| S20237 | WET SPLINE ADAPTER | 1 | |
| SB737-27-1267 | T/E TORQUE TUBE SPLINE CHK PIN | 1 | |
| SCV08 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/4) | 1 | |
| SCV09 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 9/32) | 1 | |
| SCV10 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/16) | 1 | |
| SCV11 | REVERSIBLE RATCHETING WRENCHES - SPLINE | 1 | |
| SCV12 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 3/8 RIVERSIBLE) | 1 | |
| SCV14 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 7/16”RIVERSIBLE) | 1 | |
| SCV16 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/2) | 1 | |
| SCV20 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/8) | 1 | |
| SCV22 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 11/16) | 1 | |
| SCV24 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 3/4 ) | 1 | |
| SCV26 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 13/16) | 1 | |
| SCV28 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 7/8) | 2084 | |
| SCV32 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1) | 1 | |
| SCV34 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/16) | 1 | |
| SCV36 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/8) | 1 | |
| SCV40 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/4) | 1 | |
| SES161 | SPLINE SOCKET 1/2 | 1 | |
| SES161B | 1/2" HEX, SHALLOW SPLINE SOCKET | 1 | |
| SES181 | SPLINE SOCKET | 1 | |
| SES181B | SPLINE SOCKET | 2084 | |
| SES201 | SPLINE SOCKET | 1 | |
| SES201B | 5/8" HEX, SHALLOW SPLINE SOCKET | 1 | |
| SES221 | SPLINE SOCKET | 1 | |
| SES221B | 1/2DR 22-11/16 SHAL SPLINE | 1 | |
| SES241 | SPLINE SOCKET | 1 | |
| SES241B | SPLINE SOCKET | 2084 | |
| SES261 | SPLINE SOCKET | 1 | |
| SES261B | 1/2DR 26-13/16 SHAL SPLINE | 1 | |
| SES281 | SPLINE SOCKET 7/8 | 1 | |
| SES281B | 1/2DR 28-7/8 SHAL SPLINE | 1 | |
| SES301 | SPLINE SOCKET | 1 | |
| SES301B | 1/2DR 30-15/16 SHAL SPLINE | 1 | |
| SES361 | NO.36SPLINE SHALLOW SOCKET 1/2 | 1 | |
| SN10042 | 24 PC. RAT AND SPLINE SCK SET | 1 | |
| SOSR11 | 11/32" SAE, #11 SPLINE, FLANK DRIVE® 0° OFFSET NON-REVERSIBLE RATCHETING COMBINATION WRENCH | 2084 | |
| SOSR12 | 3/8" SAE, #12 SPLINE, FLANK DRIVE® 0° OFFSET NON-REVERSIBLE RATCHETING COMBINATION WRENCH | 2084 | |
| SOSR8 | 1/4" SAE, #8 SPLINE, FLANK DRIVE® 0° OFFSET NON-REVERSIBLE RATCHETING COMBINATION WRENCH | 2084 | |
| SOSRR707 | 7PC F/DR RAT SPLINE WR SET | 1 | |
| SP503 | 34 TOOTH SPLINE SOCKET | 1 | |
| SPK650-6-2 | HEX KEYS & SPLINE LOK DIA. INCH -6 AREF. 1,07 | 1 | |
| SPKH-10S | ALCOA BOLTED SPLINE DRIVE HANDLE | 1 | |
| SPKH-6S | HANDLE FOR SPLINE KEY | 1 | |
| SPKH-8S | HANDLE FOR SPLINE KEY | 1 | |
| SPL-8551 | Spline Adapter 9.5 | 1 | |
| SPL-8596 | Spline Assembly | 1 | |
| SPLINE-SPANNERS | SPLINE SPANNERS (VARIOUS SIZES) TOOL | 1 | |
| SRES18 | SPLINE TORQUE ADAPTER | 2 | |
| SRES20 | SPLINE TORQUE ADAPTOR (5/8) | 1 | |
| SRES22 | SPLINE SOCKET 11/16 | 2084 | |
| SRES24 | 1/2" DRIVE S® #24, 3/4" HEX, SPLINE TORQUE ADAPTOR | 2084 | |
| SRES28 | SPLINE TORQUE ADAPTOR (7/8) | 1 | |
| SRES30 | SNAP-ON A;T# 15/16 SPLINE DR TQ ADAPTOR | 2 | |
| SRES306 | SNAP-ON - SET, TORQUE ADAPTOR, SPLINE, 1/2 IN. DRIVE (6 PCS.) (9/16 IN. TO 7/8 IN.) | 1 | |
| SRES30A | NO30 SPLINE 1/2IN DR TORQ ADPT | 1 | |
| SRES34 | 34 SPLINE TQ ADAPT 1/2 DR 3CL | 1 | |
| SRES42 | 42 1-5/16 SPLINE TQAD 1/2 SQ | 1 | |
| SRS603-10 | SPANNER WRENCH, 8-SPLINE, 5/8” | 1 | |
| SRS603-3 | SPANNER WRENCH, 8-SPLINE, #10 | 1 | |
| SRS603-4 | SPANNER WRENCH, 8-SPLINE, ¼” | 1 | |
| SRS603-5 | SPANNER WRENCH, 8-SPLINE, 5/16” | 1 | |
| SRS603-6 | SPANNER WRENCH, 8-SPLINE, 3/8” | 1 | |
| SRS603-7 | SPANNER WRENCH, 8-SPLINE, 7/16” | 1 | |
| SRS603-8 | SPANNER WRENCH, 8-SPLINE, ½” | 1 | |
| SRS603-9 | SPANNER WRENCH, 8-SPLINE, 9/16” | 1 | |
| SS-508 | Bristol® Spline Drive Keys (Type: Short) (Major diameter: 0.033") (Flute count: 4) (Add to cart: Contact us to order) (Type: Short) (Major diameter: 0.048") (Flute count: 4) (Add to cart: Contact us to order) (Type: Long) (Major diameter: 0.048") (Flute c | 1 | |
| ST2583-13 | STANDARD TOOL-WRENCH SPLINE DRIVE | 1 | |
| ST2583-2-3 | Spline Adapter Assembly | 1 | |
| STL1826 | #32 SPLINE TRQ ADPTR 1/2 SQ DR | 1 | |
| STP SCV08 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/4) | 1 | |
| STP SCV09 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 9/32) | 1 | |
| STP SCV10 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/16) | 1 | |
| STP SCV12 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 3/8 RIVERSIBLE) | 1 | |
| STP SCV14 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 7/16”RIVERSIBLE) | 1 | |
| STP SCV16 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/2) | 1 | |
| STP SCV20 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/8) | 1 | |
| STP SCV22 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 11/16) | 1 | |
| STP SCV24 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 3/4 ) | 1 | |
| STP SCV26 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 13/16) | 1 | |
| STP SCV28 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 7/8) | 1 | |
| STP SCV32 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1) | 1 | |
| STP SCV34 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/16) | 1 | |
| STP SCV36 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/8) | 1 | |
| STP SCV40 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/4) | 1 | |
| SW241 | SHORT SPLINE SOCKET 3/4X1/2 - MANUAL (STEEL) | 3 | |
| SWE 86072 | WRENCH - SPLINE, NO. 60 PROPELLER SHAFT THRUST BEARING NUT | 2084 | |
| SWE8200 | SPLINE DRIVE TORQUE MULTIPLIER | 2084 | |
| SWE8200DS | SWEENEY-DOUBLE SPLINE | 1 | |
| T 27298 | Adjusting Tool Metering Valve Stop Spline | 1 | |
| T-27298 | ADJUSTING TOOL METERING VALVE STOP SPLINE | 2084 | |
| T-304582 | Gage Internal Spline | 2 | |
| T-304583 | Gage-Internal Spline | 1 | |
| T-304584 | Gage internal Spline | 1 | |
| T-304590 | Gage-Internal Spline | 1 | |
| T-304590PM | GAGE-INTERNAL SPLINE | 2084 | |
| T-304591 | Gage,Spline | 1 | |
| T-304591PM | GAGE - INTERNAL SPLINE | 2084 | |
| T-430961 | INTERNAL SPLINE GAGE | 2 | |
| T-438325 | INTERNAL SPLINE | 2084 | |
| T-445077 | Spline Socket | 1 | |
| T-448118 | Internal Spline Gage | 1 | |
| T-449116 | Internal Spline Gage | 1 | |
| T-449116PM | INTERNAL SPLINE GAGE | 2084 | |
| T-449117 | Internal Spline Gage | 1 | |
| T-449118 | Internal Spline Gage | 1 | |
| T-449118PM | INTERNAL SPLINE GAGE | 2084 | |
| T-449121 | Internal Spline Gage | 1 | |
| T-449121PM | INTERNAL SPLINE GAGE | 2084 | |
| T-456057 | Internal Spline Gauge | 1 | |
| T-456057PM | GAGE-INTERNAL SPLINE | 2084 | |
| T-456058 | Gage,Internal Spline | 1 | |
| T-456058PM | GAGE OF INTERNAL SPLINE | 2084 | |
| T-540737 | Spline Key | 1 | |
| T101304 | INTERNAL SPLINE WRENCH ASSY O | 1 | |
| T101305 | INTERNAL SPLINE WRENCH ASSY O | 1 | |
| T101306 | SPLINED WRENCH, MAIN DRIVE SHAFT NUT | 2 | |
| T101511 | Spline Wrench | 1 | |
| T101561 | WRENCH SPLINE | 1 | |
| T101945 | EXTERNAL SPLINE TAIL ROTOR DRIVE WRENCH | 1 | |
| T101983 | INTERNAL SPLINE WRENCH | 1 | |
| T103-165 | MAST BEARING INSTALLATION AND REMOVAL SPLINED ADAPTER | 1 | |
| T103001 | INPUT QUILL SPLINE WRENCH XMSN | 1 | |
| T103024 | WRENCH, SPLINED | 1 | |
| T103139-101 | WRENCH,INTERNAL SPLINE | 1 | |
| T103144-101 | COMBINING GEAR BOX INTERNAL SPLINE WRENCH ASSEMBLY | 1 | |
| T103165 | SPLINED ADOPTER | 1 | |
| T103216-101 | SPLINE WRENCH | 1 | |
| T20273 | TOOL-SPLINED LEVER AND CHECKING | 1 | |
| T27298 | Adjusting Tool Metering Valve Stop Spline | 1 | |
| T304582 | GAGE INTERNAL SPLINE | 2 | |
| T304582PM | GAGE INTERNAL SPLINE | 2084 | |
| T304583 | GAUGE-INTERNAL SPLINE | 1 | |
| T304584 | GAGE - INTERNAL SPLINE | 1 | |
| T304590 | GAUGE-INTERNAL SPLINE | 1 | |
| T304591 | GAGE - INTERNAL SPLINE | 1 | |
| T304621 | INTERNAL SPLINE GAUGE | 1 | |
| T3098DR | SPLINE DRIVER | 2084 | |
| T430085 | SPLINE DRIVE TOOL | 1 | |
| T430961 | INTERNAL SPLINE GAGE | 2 | |
| T444539 | GAGE INTERNAL SPLINE | 1 | |
| T456058 | GAGE OF INTERNAL SPLINE | 1 | |
| T458794 | SPLINE SOCKET | 1 | |
| T720330 | SPLINED ADAPTOR | 1 | |
| TB9097G001 | SPLINE ADAPTERSPLINE WRENCH | 1 | |
| TE38641 | SPLINE COUPLING | 1 | |
| TEL10B | 1/4" DRIVE #10, 5/16" HEX, DEEP SPLINE SOCKET | 1 | |
| TEL7B | 1/4" DRIVE SAE #7, 7/32" HEX, DEEP SPLINE SOCKET | 2084 | |
| TEL8B | 1/4" DRIVE SAE #8, 1/4" HEX, DEEP SPLINE SOCKET | 2084 | |
| TELM7B | 1/4DR 7LB 7MM DEEP SPLINE SKT | 1 | |
| TELM8B | 1/4DR 8LB 8MM DEEP SPLINE SKT | 1 | |
| TES10 | SOCKET SPLINE #10 | 1 | |
| TES10B | 1/4DR 10-5/16IN SHALSPLINE SKT | 1 | |
| TES10B | HEX, SHALLOW SPLINE SOCKET | 1 | |
| TES12 | 3/8 HEX SPLINED SOCKET (SNAP-ON TOOLS) | 1 | |
| TES12B | SOCKET SPLINE 3/8" X 1/4" DRIVE SHALLOW | 2084 | |
| TES14 | SPLINE SOCKET #14 | 1 | |
| TES14B | SOCKET, SPLINE SHALLOW | 1 | |
| TES7 | SOCKET SPLINE #7 | 1 | |
| TES7B | 1/4" DRIVE SAE #7, 7/32" HEX, SHALLOW SPLINE SOCKET | 1 | |
| TES8 | SPLINE SOCKET #8 | 1 | |
| TES8B | 1/4"DR #8 1/4" SPLINE SOCKET | 1 | |
| TES9 | SOCKET SPLINE #9 | 1 | |
| TES9B | 1/4" DRIVE SAE #9, 9/32" HEX, SHALLOW SPLINE SOCKET | 2084 | |
| TM0677G001 | SPLINE FLANGE POSITIONING TOOL | 1 | |
| TMA2493 | Brake Torque Spline Adapter | 1 | |
| TMD14 | SIMPLE SOCKET ENC 1/4 SHORT SPLINE 7/16 | 2 | |
| TQES280-7CL | WRENCH 1/2DR NO.28 SPLINE TRQ | 1 | |
| TSK1522-1 | SPLINE SHAFT | 1 | |
| TSK1522-2 | SPLINE SHAFT | 1 | |
| UT630 | Fuel Spline crow foot | 1 | |
| WA24A | WRENCH SPLINE 3/4 | 1 | |
| WA24A 3/4 | WRENCH SPLINE 3/4" | 1 | |
| WAS-37660 | Spline Adapter | 1 | |
| WAS-39230 | SPLINE ADAPTER | 1 | |
| WBS-41419 | Spline Wrench - Dial Bore Gauge | 1 | |
| WET SPLINE ADAPTER | WET SPLINE ADAPTER | 1 | |
| WS603 | 1 SET K-FAST SPLINE SOCKETS TOOL | 1 | |
| WS603-08 | SPLINED SOCKET | 2084 | |
| WS603-4 | SOCKET,SOCKET WRENCH,8 SPLINE | 1 | |
| WS603-5 | SOCKET WRENCH,8 SPLINE | 1 | |
| WS603-6 | SOCKET WRENCH,8 SPLINE | 1 | |
| WS603-7 | SOCKET WRENCH,8 SPLINE | 1 | |
| WS603-8 | SOCKET WRENCH,8 SPLINE | 1 | |
| WWG19C418 | 1/8IN DRV 15/16IN DP SPLINE SC | 1 | |
| XDES1214A | WRENCH, SPLINE, BOX, | 2 | |
| XDES132-24TH | NO.32 SPLINE WRENCH | 1 | |
| XDES134-24TH | 34 SPLINE TUBE WRENCH | 1 | |
| XDES1618A | SPLINE WR. | 1 | |
| XDES1820A | SPLINE WR | 2 | |
| XDES2224A | SPLINE WRENC | 1 | |
| XDES2630A | WRENCH, SPLINE, BOX, | 1 | |
| XDES2832A | SPLINE WRENCH 7/8-1" | 2084 | |
| XDES79A | SPLINE WRENCH 7/32-9/32" | 2084 | |
| XDES810A | WRENCH, SPLINE, BOX, | 2 | |
| XDESM67 | WRENCH SPLINE BOX 6 X 7MM | 1 | |
| XDESM78 | 15 DEG OFFSET SPLINE 7,8 MM | 1 | |
| XDH605 | SPLINE WRENCH 15o OFFSET HEAD | 1 | |
| XDHF605 | SPLINE WRENCH 0O OFFSET HEAD | 2084 | |
| YA6775A | SPLINE OXYGEN SENSORSKT W HNDL | 1 | |
| YA8875B | SPLINE OXYGEN SENSOR WRENCH | 1 | |
| YA9375B | SPLINE OXYGEN SENSOR OFFSET WR | 1 | |
| lC6827 | GAGE SET, SPLINE WEAR | 1 | |
| PWC61155 | DRIFT, SPLINED, GEARSHAFT PUMP DRIVE | 2084 | |
| SES261B | 1/2" DRIVE SAE #26, 13/16" HEX, SHALLOW SPLINE SOCKET (CHROME) | 2084 | |
| TES12 | SOCKET SPLINE 3/8" X 1/4" DRIVE SHALLOW | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
