| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 98A27803003000 | SHIM SHIM | 9 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 833204-1 | Shim Checking Gage | 1 | |
| (CALIB) 98D52308002000 | CURVED SHIM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27601000000 | TOOL SHIM-SETTING,SPOILER (CALIBRATION) (CALIBRATION) | 1 | |
| 010A-39115 | SHIM | 1 | |
| 03208O6 | SHIM | 1 | |
| 0442512-1 | SHIMMEY DAMPER | 1 | |
| 06-5022-6C00 | Shimmy Damper Fluid Unit (Ce) | 9 | |
| 06-5056-1D00 | Shimmy Damper Fluid Pump | 1 | |
| 068-01100 | SHIM | 1 | |
| 078-540-000 | REFERENCE BLOCK - FERROUS (VARIANT FITTED W 4 SHIMS 0,5MM THICK EA) | 1 | |
| 078-540-038 | REFERENCE BLOCK TITANIUM (VARIANT FITTED WITH 4 SHIMS 0,5MM THICK EA) | 1 | |
| 078-540-039 | REFERENCE BLOCK STAINLESS STEEL (VARIANT FITTED 4 SHIMS 0,5MM THICK EA) | 1 | |
| 078-540-040 | REFERENCE BLOCK ALUNINIUM (VARIANT FITTED WITH 4 SHIMS 0,5MM THICK EA) | 1 | |
| 1085 | SHIMPO FORCE GAUGE (MF-20KG) TEST SET | 1 | |
| 099425 | SETTING SHIM | 1 | |
| 0321004 | SET OF NON-CONDUCTIVE PLASTIC SHIMS | 1 | |
| 0279940450 | SHIM | 1 | |
| 0292660100 | SHIM | 1 | |
| 0292760280 | SHIM | 1 | |
| 0292900280 | FRONT ADJUSTING SHIM | 1 | |
| 0292900300 | REAR ADJUSTING SHIM | 1 | |
| 0298700240 | SHIM,ADJUSTING | 1 | |
| 0301500750 | SHIM | 1 | |
| 0319103630 | LAMINED SHIM | 1 | |
| 0319760080 | SHIM,ADJUSTING | 1 | |
| 0319760430 | SHIM | 1 | |
| 0319761630 | SHIM,ADJUSTING | 1 | |
| 0322100330 | WASHER,SHIMMING | 1 | |
| 0322720140 | ADJUSTING SHIM | 1 | |
| 0333710590 | SHIM | 1 | |
| 0390950270 | SHIM | 1 | |
| 0465410830 | ASSEMBLY SHIM C-RING | 1 | |
| 09P305 | SHIM | 1 | |
| 0S22935 | SHIMS SPECIAL | 1 | |
| 0S22935A | SHIMS | 1 | |
| 109-0110-34-1 | SHIM | 1 | |
| 109-0111-24-101 | SHIM, TEFLON | 1 | |
| 109-0111-38-101 | SHIM | 1 | |
| 109011203103A561B | POSITIONING/ BONDING TOOL, METAL WASHERS AND FIBERGLASS SHIMS BONDING PART | 1 | |
| 109011203103A561C | POSITIONING/ BONDING TOOL, METAL PLATES AND FIBERGLASS SHIMS BONDING PART | 1 | |
| 10C1196 | SHIM SET - SUPPORT-LPT ROTOR/STATOR | 1 | |
| 114-1035 | SHIMS FOR HIGH-PRESSURE LEAK TEST | 1 | |
| 114-1035TE | Leak test shim | 1 | |
| 114-1214TE | Leak test shim | 1 | |
| 114-1406 | TEST SHIMS | 1 | |
| 114-1604 | HIGH-PRESSURE LEAK TEST SHIMS | 1 | |
| 114-330 | HIGH-PRESSURE LEAK TEST SHIMS | 1 | |
| 114-330TE | Leak test shim | 1 | |
| 114-331 | Shims for high pressure leak test | 1 | |
| 114-374 | LEAK TEST SHIM | 2 | |
| 114-374TE | Leak test shim | 1 | |
| 114-388TE | Leak test shim | 1 | |
| 114-416 | SHIM TOOL FOR HIGH PRESSURE LEAK TEST | 1 | |
| 114-433 | SHIM LEAK TEST | 1 | |
| 114-433TE | Leak test shim | 1 | |
| 115-555023-7 | SHIM FOR FREON COMPRESSOR | 1 | |
| 117-32 | *SHIM | 6 | |
| 117-34 | *SHIM | 8 | |
| 11C3465 | SHIM SET | 1 | |
| 1243030-5 | SHIM | 1 | |
| 1610000F29 | SHIMMING TOOL | 1 | |
| 161498-001 | SHIM TRUNNION | 1 | |
| 170-00835-601 | SHIM ASSY | 1 | |
| 1700791 | SHIM | 1 | |
| 170T07153-401 | DEVICE ASSY - LOCK, SHIMMY DAMPER LDG | 1 | |
| 170T07153-401 | DEVICE ASSY - LOCK, SHIMMY DAM | 1 | |
| 185100-000Z000 | SHIM (TOOL FOR SAFRAN SEATS) | 1 | |
| 1949120019 | SHIM BOX - SENSOR | 1 | |
| 1C8117 | SHIM SET | 1 | |
| 1C9397 | HOLDER - SHIM HP TURB PRESS | 1 | |
| 1C9397G01 | HOLDER, SHIM - HP TURB PRESSURE TUBE ADAPTER | 1 | |
| 1C9435G01 | RING, SHIM - HPT STAGE 1 NOZZLE SUPPORT (DLE ONLY) | 1 | |
| 1SF2797 | MLG SHIMMY ADJUST TOOL | 1 | |
| 2000A4210K01 | SHIMMY DAMPER NUT SOCKET (12) | 1 | |
| 2000A5609K01 | SHIMMY DAMPER NUT SOCKET (12) | 1 | |
| 2024067 | Fixture-Press Seal And Shim | 1 | |
| 206TRC | TAIL ROTOR TRUNNION SHIMMING | 1 | |
| 21C7020G03 | PTO DRIVE ASSEMBLY SHIM AND BACKLASH CHECK KIT | 1 | |
| 228591-1 | SHIM CHECKING GAGE | 1 | |
| 23030210 | Gage-Shim | 1 | |
| 2309-S015-401 | TOOL, POSITIONING -TRAILING ARM SHIM | 2 | |
| 2309‐S015‐401 | TOOL,POSITIONING‐TRAILING ARM SHIM | 2 | |
| 2558615 | ASSEMBLY SHIM | 1 | |
| 2558693 | ASSEMBLY SHIM | 1 | |
| 2558741 | ASEEMBLY, TEST SHIM | 1 | |
| 2558743 | ASSEMBLY SHIM | 1 | |
| 2558801 | ASSEMBLY SHIM | 2 | |
| 2558842 | SHIM ASSEMBLY | 1 | |
| 2558911 | SHIM-BRAKE ASSY | 1 | |
| 2558928 | ASSEMBLY SHIM | 1 | |
| 2560930 | SHIM-BRAKE ASSEMBLY | 1 | |
| 2566449 | Shimming Fixture | 1 | |
| 25FC5903 | SHIM, PLATE | 1 | |
| 269382-1 | SHIM CHECKING GAGE | 1 | |
| 269T9272-7 | Main Rotor Rigging Block W/ Shim | 1 | |
| 27-0 | SPACER SHIMS HARD STEEL .187 SHANK 1/64 A | 1 | |
| 27-1 | Spacer Shims (Shank size: .187") (Thickness: 1/64") (Add to cart: Add To Cart) (Shank size: .187") (Thickness: 1/32") (Add to cart: Add To Cart) | 1 | |
| 27-2 | Spacer Shims (Shank size: .187") (Thickness: 1/64") (Add to cart: Add To Cart) (Shank size: .187") (Thickness: 1/32") (Add to cart: Add To Cart) (Shank size: .187") (Thickness: 1/16") (Add to cart: Add To Cart) | 1 | |
| 27-3 | Spacer Shims (Shank size: .187") (Thickness: 1/64") (Add to cart: Add To Cart) (Shank size: .187") (Thickness: 1/32") (Add to cart: Add To Cart) (Shank size: .187") (Thickness: 1/16") (Add to cart: Add To Cart) (Shank size: .250") (Thickness: 1/32") (Add | 1 | |
| 27-4 | Spacer Shims (Shank size: .187") (Thickness: 1/64") (Add to cart: Add To Cart) (Shank size: .187") (Thickness: 1/32") (Add to cart: Add To Cart) (Shank size: .187") (Thickness: 1/16") (Add to cart: Add To Cart) (Shank size: .250") (Thickness: 1/32") (Add | 1 | |
| 27-5 | Spacer Shims (Shank size: .187") (Thickness: 1/64") (Add to cart: Add To Cart) (Shank size: .187") (Thickness: 1/32") (Add to cart: Add To Cart) (Shank size: .187") (Thickness: 1/16") (Add to cart: Add To Cart) (Shank size: .250") (Thickness: 1/32") (Add | 1 | |
| 27-6 | SPACER SHIMS HARD STEEL .312 SHANK 1/32 A | 1 | |
| 27-7 | Spacer Shims (Shank size: .187") (Thickness: 1/64") (Add to cart: Add To Cart) (Shank size: .187") (Thickness: 1/32") (Add to cart: Add To Cart) (Shank size: .187") (Thickness: 1/16") (Add to cart: Add To Cart) (Shank size: .250") (Thickness: 1/32") (Add | 2 | |
| 27-8 | Spacer Shims (Shank size: .187") (Thickness: 1/64") (Add to cart: Add To Cart) (Shank size: .187") (Thickness: 1/32") (Add to cart: Add To Cart) (Shank size: .187") (Thickness: 1/16") (Add to cart: Add To Cart) (Shank size: .250") (Thickness: 1/32") (Add | 3 | |
| 274170006310-01 | SHIM SUPPORT EQUIPPED LINEAR SCREW / NUT TUBE | 1 | |
| 28-0-4834 | FILL AND BLEED SHIMMY DAMPER | 2 | |
| 281988-1-1 | Shim Checking Gage | 1 | |
| 281988-3 | Shim Gage | 1 | |
| 281988-3-1 | SHIM GAGE | 1 | |
| 2821-0041 | SHIM | 3 | |
| 284115-1 | Shim Checking Holder Assembly | 1 | |
| 284115-1-1 | HOLDER SHIM CHECKING | 1 | |
| 284115-1-1PM | HOLDER SHIM CHECKING | 1 | |
| 284988-1-1 | CAGE ASSEMBLY, SHIM CLEARANCE | 1 | |
| 287303-1-1 | GAGE SHIM CLEARANCE | 1 | |
| 287467-1 | SHIM CLEARENCE GAGE | 1 | |
| 287467-1-1 | SHIM CLEARANCE GAGE | 3 | |
| 287467-1-1PM | SHIM CLEARANCE GAGE | 1 | |
| 287467-2-1 | Shim Clearance Gage | 1 | |
| 2874674-1 | SHIM CLEARANCE GAGE | 1 | |
| 287904-1 | GAGE SHIM CLEARENCE | 1 | |
| 287905-1 | GAGE SHIM CLEARENCE | 1 | |
| 289198-1 | GAGE SHIM CLEARANCE | 1 | |
| 289203-1 | GAGE SHIM CLEARANCE | 1 | |
| 289204-1 | GAGE SHIM CLEARANCE | 1 | |
| 289205-1 | GAGE, SHIM CLEARANCE | 1 | |
| 289241-1 | GAGE SHIM CLEARANCE | 1 | |
| 289242-1 | GAGE SHIM CLEARANCE | 1 | |
| 2892431 | SHIM CLEARANCE | 1 | |
| 289459-1 | GAGE,SHIM CHECKING | 1 | |
| 289565-1 | Shim Checking Gage Set | 1 | |
| 289566-1 | GAGE SHIM CHECKING | 1 | |
| 289591-1 | SHIM CHECKING GAGE | 1 | |
| 289591-1TK | SHIM CHECKING GAGE | 1 | |
| 289656 | GAGE SET SHIM CHECKING | 1 | |
| 289656-1 | GAGE SET SHIM CHECKING | 1 | |
| 289656-1TK | SHIM CHECKING GAGE | 1 | |
| 289697-1 | GAGE SHIM CHECKING | 1 | |
| 289701-1 | GAGE SHIM CHECKING | 3 | |
| 289745-1 | HOLDER SHIM CHECKING | 1 | |
| 289857-1 | GAGE SET SHIM CHECKING | 1 | |
| 289888-1 | SHIM GAUGE | 1 | |
| 291053-1 | SHIM CHECKING GAGE | 1 | |
| 291058-1 | GAGE SHIM CHECKING | 1 | |
| 291119-1 | HOLDER SHIM CLEARANCE | 1 | |
| 291176-1 | SHIM CHECKING SPACER | 1 | |
| 291190-1 | SHIM RETAINING PLATE | 1 | |
| 291348-1 | GAGE SET SHIM CHECKING | 1 | |
| 291455 | Shim Checking Gage | 1 | |
| 291644-1 | SHIM CLEARANCE | 1 | |
| 291815-1 | SHIM CHECKING GAGE | 1 | |
| 291815-1-1 | SHIM CHECKING GAGE | 1 | |
| 291815-1TK | SHIM CHECKING GAGE | 1 | |
| 291819-1 | GAGE, SHIM CHECKING | 1 | |
| 293084-1 | SHIM CHECKING GAGE | 1 | |
| 293086-1 | SHIM CHECKING GAGE | 1 | |
| 293162-1 | SHIM CHECKING GAGE | 1 | |
| 293166-1 | SHIM CHECKING GAGE | 1 | |
| 293250-1 | SHIM CHEKING GAGE | 1 | |
| 293354-1 | Shim clearance cylindrical gage | 1 | |
| 293354-1PM | SHIM CLEARANCE CYLINDRICAL GAGE | 1 | |
| 293358-1 | Shim Clearence Gage Set | 1 | |
| 293358-1PM | SHIM CLEARANCE GAGE SET | 1 | |
| 293359-1 | Shim Clearence Gage Set | 1 | |
| 293359-1PM | SHIM CLEARANCE GAGE SET | 1 | |
| 293497-1 | SHIM CHECKING DUMMY BEARING SET | 1 | |
| 293685-1 | GAGE ASSY SHIM CHECKING | 1 | |
| 293709-1 | SHIM CHECK GAGE | 1 | |
| 2937141 | GAGE SHIM | 1 | |
| 293715-1 | SHIM CHECKING GAGE | 1 | |
| 293802-1 | SHIM CHECKING CLAMP | 1 | |
| 293814-1 | SHIM CHECKING DUMMY BEARING SET | 1 | |
| 294324-1 | SHIM CLEARANCE GAGE SET | 1 | |
| 296081 | GAGE SHIM CHECKING | 1 | |
| 296081-1 | SHIM CHECKING GAGE | 1 | |
| 296303-1 | GAGE SHIM CHECKING | 1 | |
| 296325-1 | SHIM CHECKING GAGE | 1 | |
| 296326-1 | SHIM CHECKING GAGE | 1 | |
| 296340-1 | SHIM GAUGE | 1 | |
| 296478-1 | GAGE, SHIM CHECKING | 1 | |
| 296488-1 | Shim Checking Gage | 1 | |
| 296488-1PM | SHIM CHECKING GAGE | 1 | |
| 298206-1 | SHIM CHECKING DIAL GAGE ASSEMBLY | 1 | |
| 298406-1 | SHIM CHECKING DUMMY BEARING AND SPACER SET | 1 | |
| 2C6119 | SHIM SET, BLADE TIPS-COMPRESSOR ROTOR | 1 | |
| 2C6119G01 | SHIM SET | 1 | |
| 2C6119G02 | SHIM SET, BLADE TIPS - COMPRESSOR ROTOR | 1 | |
| 2C6157 | GAGE SHIM LPT COUPLIN | 1 | |
| 2C6523G01 | GAGE , SHIME LOW PRESSURE TURBINE COUPLING | 1 | |
| 2C81009G01 | FIXTURE, MEASURE, SHIM LPT | 1 | |
| 2C81009G02 | FIXTURE LPT SHIM MEASURE | 1 | |
| 2C81182G01 | FIXT, MEAS SHIM THICK BEV GEAR | 1 | |
| 2C81226P02 | FIXTURE, HPC STATOR SHIM AND KEY | 1 | |
| 2C81621G01 | FIXTURE - SHIMMING - PTO | 1 | |
| 2C91170G01 | FIXTURE-SHIM THICKNESS | 1 | |
| 2C91213G01 | FIXTURE-CHECKING SHIM BACKLASH | 1 | |
| 3064-0004 | MEASURING SHIM | 1 | |
| 3151ES000-003 | SHIM | 1 | |
| 3170045-1 | RADOME EROSION BOOT SHIM | 1 | |
| 330A93-3082-00 | SHIMS,TOOL FLEXIBLE MOUNTING | 1 | |
| 330A93-3119-00 | SHIM,SETTING | 1 | |
| 330A93303200 | FLEXIBLE PLATE SHIMS | 1 | |
| 332A08-0648-21 | SHIM | 1 | |
| 332A93-3090-00 | SHIMS, TOOL FLEXIBLE MOUNTING | 1 | |
| 332A93-4207-20 | ASSEMBLY SHIM | 1 | |
| 332A93420720 | ASSEMBLY SHIM | 1 | |
| 332A94-3310-00 | SETTING SHIM END PLAY | 1 | |
| 332A94-3310-01 | SETTING SHIM END PLAY | 1 | |
| 332A94-3310-21 | SHIM | 1 | |
| 332A944500.00 | TORQUEMETTER / SHIM SETTING TOOL SET | 1 | |
| 332A944500.26 | CALIBRATING SHIM | 1 | |
| 332A94450000 | TORQUEMETTER / SHIM SETTING TOOL SET | 1 | |
| 332A94‐5400‐10 | JET PIPE LH SETTING SHIM | 1 | |
| 332A94‐5400‐11 | JET PIPE RH SETTING SHIM | 1 | |
| 332A94‐8210‐20 | SHIM | 1 | |
| 332А93-3090-00 | SHIM | 1 | |
| 35-42301-0201 | SHIM: | 1 | |
| 350A13102220 | SHIM COMPOSITE | 1 | |
| 350A13102221 | SHIM COMPOSITE | 1 | |
| 350A93370800 | SETTING SHIM REAGLING TOOL | 1 | |
| 350A96320322 | SHIM MGB PLANET GEAR | 1 | |
| 350А37-1264-20 | SHIM, PEEL | 1 | |
| 365A94-3247-20 | SPECIAL SHIM | 1 | |
| 3761017-1 | GAGE SHIM CHECKING | 1 | |
| 3791013-1 | Shim Clearence Gage Set | 1 | |
| 3791013-1PM | SHIM CLEARANCE GAGE SET | 1 | |
| 3791014-1 | Shim Clearance Transfer Gage Assy | 1 | |
| 3791014-1PM | SHIM CLEARANCE TRANSFER GAGE ASSEMBLY | 1 | |
| 3791015-1 | Shim checking transfer gage assy | 1 | |
| 3791015-1PM | SHIM CHECKING TRANSFER GAGE ASSEMBLY | 1 | |
| 3791055-1 | FIXTURE SHIM CHECKING | 1 | |
| 3791062-1 | GAGE SHIM CHECKING | 1 | |
| 3791067-1 | GAGE SET SHIM CHECKING | 1 | |
| 3791070-1 | PLATE BRAKE TORQUE SHIMMING | 1 | |
| 3791100-1 | GAGE SET SHIM CHECKING | 1 | |
| 3791114-1 | SHIM-CHECKING GAGE | 1 | |
| 3791114-2 | BRAKE AND CLUTCH ASSEMBLY SHIM GAGE ASSEMBLY | 1 | |
| 3791118-1 | Shim Checking Gage | 1 | |
| 383820NKS | SHIM WINDOW | 1 | |
| 38382DNKS | SHIM WINDOW | 1 | |
| 3G6220A05451 | SHIM, PEELING | 1 | |
| 3G6510A05651 | PEELING SHIM | 1 | |
| 407-XMSN | 407 TRANSMISSION SHIMS PER BELL'S ORIGINAL SHIM DRAWING, $1000 PER SET OF FOUR (4) | 1 | |
| 420688-6 | SETTING SHIMS | 1 | |
| 422334M0NT1 | SHIM | 1 | |
| 422336M0NT1 | SHIM | 1 | |
| 43100-20-2021 | TORQUE LIMITER SHIMMING | 1 | |
| 4834 | Shimmy damper fill Fokker | 1 | |
| 46477 | Washer Shim | 1 | |
| 50049 | SHIM LAMINATED | 1 | |
| 422216 | SHIM | 1 | |
| 422546 | SHIM | 1 | |
| 4TLD3 | SHIMPO Digital Force Gauge,Range 200 lb,USB | 1 | |
| 4TLE4 | SHIMPO Digital Force Gauge,Range 100 lb | 1 | |
| 51021 | COMPRESSOR ROTO BALANCING SHIM | 1 | |
| 513-063 | SHIM | 1 | |
| 513-072 | COLLET SHIM | 1 | |
| 513.32.12.132 | SHIMMY DAMPER LEVEL GAUGE ASSEMBLY | 1 | |
| 5143-2 | SHIM | 1 | |
| 53-25 | SET ASSORTMENT KIT 31PC ASSORTMENT KIT INCLUDES ASSORTED CUPPED & FLUSH SETS, SOFT BLANKS, SPACER SHIMS & METAL CASE | 1 | |
| 531000578-1/2/3/4/5 | SHIM | 1 | |
| 53100578-1 | SHIM | 1 | |
| 53100578-2 | SHIM | 1 | |
| 53100578-3 | SHIM | 1 | |
| 53100578-4 | SHIM | 1 | |
| 53100578-5 | SHIM | 1 | |
| 53100578-6 | SHIM | 1 | |
| 558-1-30100 | LOCATOR-SHIM | 1 | |
| 558-2-16306 | FIXTURE-SHIM,MEASURING | 1 | |
| 5590032-2 | SHIM | 1 | |
| 59622A0000-01 | TORQUE SPANNER-SHIMMY DAMPER REMOVAL | 4 | |
| 5965684-25 | Shim Assembly | 1 | |
| 6127137-008 | SHIMMY DAMPER | 1 | |
| 6147MT000-067 | SETTING SHIM | 1 | |
| 6197MT000-062 | SHIM | 1 | |
| 6197MT000-129 | SHIM | 1 | |
| 7032 | SHIMMY DAMPER FILLING TOOL | 2 | |
| 7170 | SHIMMY DAMPER - SERVICING | 8 | |
| 625551 | FLAW SHIM | 1 | |
| 625553 | FLAW SHIM | 1 | |
| 460006804 | SHIMMY DAMPER BLEEEDTOOL TOOL | 27 | |
| 537831520 | SHIM - CNA SUPPORT, CFM56-5C | 1 | |
| 4618241533 | SHIM | 1 | |
| 6260A8000-01 | SHIM TOOL, DRAG BRACE APEX PIN | 1 | |
| 6263-0004 | SHIMMY DAMPER NUT SOCKET (11) | 1 | |
| 6263-6102 | SHIMMY DAMPERS TORQUES SPANNER | 1 | |
| 6263-6103 | SHIMMY DAMPER BOLT SOCKET | 1 | |
| 63001001-3 | Shimming Ring | 1 | |
| 63001003-3 | Shimming Dummy Washer | 1 | |
| 63001004-3 | Shimming Spacer | 1 | |
| 63001005-3 | Shimming Spacer | 1 | |
| 63001006-3 | Shimming Dummy Washer | 1 | |
| 63001007-3 | Shimming Spacer | 1 | |
| 63001009-1 | Shimming Fixture | 1 | |
| 636-1100-3GSE | CURVED SHIM | 3 | |
| 64301-FE276-300 | SHIM SETTING | 1 | |
| 64401FE250000 | SHIM SETTING | 1 | |
| 64402FE240-002 | SHIM SETTING | 1 | |
| 64402FE240002 | SHIM SETTING | 1 | |
| 656-186 | SHIM RING 3/4 X 1"1/8 X 0.31 STEEL | 1 | |
| 65B01925-32 | SHIM | 1 | |
| 6791532 | SHIM | 1 | |
| 68506-723 | SHIM | 1 | |
| 687-9715-001 | PITCH SHIM | 1 | |
| 687-9715-002 | PITCH SHIM | 1 | |
| 687-9715-003 | PITCH SHIM | 1 | |
| 687-9715-004 | PITCH SHIM | 1 | |
| 687-9715-005 | PITCH SHIM | 1 | |
| 687-9715-006 | PITCH SHIM | 1 | |
| 687-9715-007 | PITCH SHIM | 1 | |
| 687-9715-008 | PITCH SHIM | 1 | |
| 687-9728-001 | ROLL SHIM KIT | 1 | |
| 6893383 | SHIM CHECKING FIXTURE | 2 | |
| 6899957 | GAGE-FUEL NOZZLE SHIM MEASURING | 2 | |
| 6899966 | FIXTURE- FUEL NOZZLESHIMMEASURING | 2 | |
| 68SHIMBLOCK | SHIM BLOCK | 1 | |
| 6954 350A371290 | MRS - HALF SHIM | 1 | |
| 7003764 | SHIM | 1 | |
| 703A94-2790-00 | SHIM, TEST BINDING SERVO-CONTROL | 1 | |
| 7312218-507 | SHIM ASSY | 1 | |
| 756-147 | SHIM-BACK BLEEDER | 1 | |
| 757-611 | SHIM | 1 | |
| 76700-20156-041 | SHIM GAGE | 1 | |
| 76700-20156-042 | SHIM GAGE | 1 | |
| 8011531-508 | SHIM MEASUREMENT TOOLKIT | 1 | |
| 804.U | SET OF SHIMS (FACOM) | 1 | |
| 813676-T1 | Shimming Fixture | 1 | |
| 813676-T2 | Shimming Fixture | 1 | |
| 813676T1 | SHIMMING FIXTURE | 1 | |
| 813676T2 | SHIMMING FIXTURE | 1 | |
| 8307725 | SHIMMING TOOL | 1 | |
| 833118-1 | Shim Checking Gage Set | 1 | |
| 833118-2 | SHIM CHECKING GAGE SET | 1 | |
| 833204-1 | SHIM CHECKING GAGE | 1 | |
| 833206-1 | SHIM CHECKING GAGE | 1 | |
| 834392 | SHIM SLAVE | 1 | |
| 835221-1 | SHIM CLEARANCE GAGE | 1 | |
| 835598-1 | Shim Gauge | 1 | |
| 846-501-900 | ADAPTER PULLER– FAN BLADES SHIM | 1 | |
| 856A1050 | FIXTURE, INSPECT SHIM | 1 | |
| 856A1050 G04 | FIXTURE, INSPECT SHIMMING INLET GEARBOX | 3 | |
| 856A1050G01 | FIXTURE, INSPECT SHIMMING INLET GEAR BOX | 1 | |
| 856A1050G02 | FIXTURE, INSPECT SHIMMING INLET GEAR BOX | 1 | |
| 856A1050G03 | FIXTURE, INSPECT SHIMMING INLET GEAR BOX | 1 | |
| 856A1050G04 | FIXT. INSPECT SHIM I | 3 | |
| 856A1050G05 | FIXTURE, INSPECT SHIMMING INLET GEARBOX | 1 | |
| 856A1050P33 | FIXTURE, INSPECTION SHIMMING IGB (INSPECTION FIXTURE) | 1 | |
| 856A3707G05 | REMOVAL TOOL - SPACER SHIM -700 | 11 | |
| 856A3707G05L0C | REMOVAL TOOL - SPACER SHIM | 1 | |
| 856A4639P05 | SHIM | 1 | |
| 87001-FE159 | SHIM TOOL | 1 | |
| 87001-FE201 | SHIM TOOL | 1 | |
| 91470285 | SHIM | 1 | |
| 91470290 | SHIM | 1 | |
| 91470291 | SHIM | 1 | |
| 91470323 | SHIM | 1 | |
| 91470325 | SHIM | 1 | |
| 91470326 | SHIM | 1 | |
| 91470360 | SHIM | 1 | |
| 91470590 | SHIM | 1 | |
| 91470646 | SHIM | 1 | |
| 91472290 | SHIM | 1 | |
| 8812240000 | SHIM | 2 | |
| 8814724000 | SHIM | 1 | |
| 8815099209 | SHIM | 1 | |
| 8819316000 | SHIMS (SET OF 3) | 1 | |
| 1E1157 | SHIM | 1 | |
| 886-60 | SHIM: | 1 | |
| 8C2091 | SET, SHIMS, HPTR CENTERING | 1 | |
| 8C2541 | SHIMS, CENTERING SET | 1 | |
| 8C3291 | SEATING TOOL - SHIM - VBV DOOR | 1 | |
| 8C3524 | BASE - SHIM MEASUREMENT - TGBX - VERTICAL | 1 | |
| 8C3525 | ADAPTER - SHIM MEASUREMENT - TGBX - VERTICAL | 1 | |
| 8C3526 | BASE - SHIM MEASUREMENT - TGBX - HORIZONTAL | 1 | |
| 9520011390 | SHIM | 1 | |
| 9520011847 | LAMINATED SHIM | 1 | |
| 9560138360 | SHIM | 1 | |
| 9560152980 | SHIM | 1 | |
| 9560155650 | SHIM | 1 | |
| 9560159100 | SHIM | 1 | |
| 9560167230 | SHIM,PEEL | 1 | |
| 9560171370 | SHIM,PEEL | 1 | |
| 956A1153 | FIXTURE - SHIM HP COMPRESSOR STATOR AFT CASE | 1 | |
| 956A1524 | FIXTURE - INSPECT - SHIMMING - IGB | 1 | |
| 956A3153 | FIXTURE - SHIM HPCS AFT CASE | 1 | |
| 956A6001 | SHIM - ADJUST - SENSOR N1 | 1 | |
| 956A7644P64 | SHIM | 1 | |
| 956A8324 | SHIM - DUMMY - PLATE PROTECTION REAR | 1 | |
| 956A8330 | SHIM - RAISE - DIMENSION CHECK - LPT ASSY | 1 | |
| 95SPL-12757-B-0185 | SHIMS, UPPER PISTON ASSEMBLY | 1 | |
| 97-820000-17 | SHIM | 1 | |
| 97235K816 | SLOTTED SHIM SET | 1 | |
| 97D34103000200 | SHIMING FOAM PTZ 29KG/M3 | 1 | |
| 97D34103000202 | SHIMING FOAM | 1 | |
| 98126A650 | STAINLESS STEEL SHIM 3/8 ID X 5/8 OD X 0.031 THICK | 1 | |
| 98A21001600202 | SHIM | 1 | |
| 98A27803002000 | SHIM | 1 | |
| 98A27803003000 | SHIM | 9 | |
| 98A53103001200 | SHIM TOOL | 1 | |
| 98A53103001202 | SHIM TOOL | 1 | |
| 98A57103032000 | DRILLING TOOL-SHIM DOUBLER, RIB 1 | 1 | |
| 98A57103032001 | DRILLING TOOL,SHIM DOUBLER RIB 1-KIT 1 | 1 | |
| 98A57103032002 | DRILLING TOOL,SHIM DOUBLER RIB 1-KIT 2 | 1 | |
| 98C7830H049-000 | ODUCT MAINTENANCE SLIDE SHIM | 1 | |
| 98D52038002000 | CURVED SHIM | 1 | |
| 98D52308001000 | LONG CURVED SHIMS | 7 | |
| 98D52308002000 | CURVED SHIM | 6 | |
| 98D52603001000 | SETTING SHIM | 7 | |
| 98D54403002104 | SHIM | 1 | |
| 98D54403002240 | SHIM | 4 | |
| 98F07203000120 | SHIM PLATE FOR FITTING C17 LH | 1 | |
| 98F07203000120-SHIM-LH | SHIM PLATE FOR FITTING C17 LH | 1 | |
| 98F07203000121 | SHIM PLATE FOR FITTING C17 RH | 1 | |
| 98F07203000121-SHIM-RH | SHIM PLATE FOR FITTING C17 RH | 1 | |
| 98F57103012000 | SPLICE SHIM COPY | 1 | |
| 98L27601000000 | SHIM-SETTING,SPOILER | 3 | |
| 98L27601000040 | CALE REGLAGE SPOILER SPOILER SETTING SHIM | 1 | |
| 98L27601000100 | CALE REGLAGE SPOILER SPOILER SETTING SHIM | 1 | |
| 98L52403000224 | SHIM | 1 | |
| 98L53103004208 | SHIM | 1 | |
| 98S53003002203 | SHIM | 1 | |
| 98S53003002204 | SHIM | 1 | |
| 98S53003003203 | SHIM | 1 | |
| 98S57205001000 | WEDGES - SHIM SET | 2 | |
| 99A34201102103 | SHIM | 1 | |
| 99A57103057003 | REAR FRAME FITTING SHIM | 1 | |
| 9C1366 | SHIM SET *** | 1 | |
| 9C1366G01 | SHIM SET - STAGE 6 LOW PRESSURE TURBINE ROTOR (LPTR) | 1 | |
| 9C1901 | TOOL SET/ BACKLASH SHIM | 1 | |
| 9C2053 | TOOL SET SHIM THICKNESS DETERMINATION IGBX ASSY | 1 | |
| 9C2055 | SHIM THICKNESS DETERMINATION | 1 | |
| 9C2056 | SHIM THICKNESS DETERMINATION | 1 | |
| 9C2131 | CENTERING SHIMS | 1 | |
| 9C2131G01 | SHIMS, CENTERING SET | 1 | |
| 9C2247 | SHIM, HPC ROTOR BALANCING | 1 | |
| 9C2247G01 | Shim HPC Balancing | 1 | |
| A109BF-2255-1 | SHIM | 1 | |
| A11001 | SHIM | 3 | |
| A11111 | Shim | 2 | |
| A27001-1 | 767 RUDDER SHIMMING TOOL | 8 | |
| A27055-1 | FIXTURE - TRAILING EDGE FLAP DRIVE WORM GEAR SHIM THICKNESS | 1 | |
| A320-53-1119 | A320 SHIM CHECK TOOL(ESC/SLIDE | 1 | |
| A32086-1 | JIG - DOWNLOCK STOP SHIM ADJUSTMENT | 7 | |
| A32086-1-M | JIG EQPT- DOWNLOCK STOP SHIM | 1 | |
| A32096-45 | TORSION LINK SHIM | 1 | |
| A5377644220800 | SHIM | 1 | |
| A660743 | SLAVE SHIM | 1 | |
| A678789 | SHIM GRINDING PLATE | 1 | |
| A678790 | SHIM GRINDING PLATE | 1 | |
| A678791 | SHIM GRINDING PLATE | 1 | |
| A685269 | SHIM GRINDING PLATE | 1 | |
| A685269 PM | SHIM GRINDING PLATE | 1 | |
| A685270 | SHIM GRINDING PLATE | 1 | |
| A685270 PM | SHIM GRINDING PLATE | 1 | |
| A685271 | SHIM GRINDING PLATE | 1 | |
| A685271 PM | SHIM GRINDING PLATE | 1 | |
| A685272 | SHIM GRINDING PLATE | 1 | |
| A685272 PM | SHIM GRINDING PLATE | 1 | |
| A686923 | SHIM GRINDING PLATE | 1 | |
| A687045 | SHIM GRINDING PLATE | 1 | |
| A687046 | SHIM GRINDING PLATE | 1 | |
| A687047 | SHIM GRINDING PLATE | 1 | |
| A688472 | SHIM GRINDING PLATE | 1 | |
| A688472 PM | SHIM GRINDING PLATE | 1 | |
| A688789 | SHIM GRINDING PLATE | 1 | |
| A690720 | SHIM GRINDING PLATE | 1 | |
| A690744 | SHIM GRINDING PLATE | 1 | |
| A71013-52 | SHIM | 1 | |
| A864A0673G030T | SHIM | 1 | |
| A99154-1 | SHIM | 1 | |
| A99154-2 | SHIM | 1 | |
| A99154-3 | SHIM | 1 | |
| AAR-ST-0310 | ADJUSTMENT SHIM(38MMX38MMX20MM) | 1 | |
| AAR-ST-0311 | ADJUSTMENT SHIM(50MMX50MMX7MM) | 1 | |
| AAR-ST-0312 | ADJUSTMENT SHIM((50MMX50MMX1.4MM) | 1 | |
| AAR-ST-0313 | ADJUSTMENT SHIM(50MMX50MMX1.8MM) | 1 | |
| AC120 | KIT, PIN TOOL & SHIM | 1 | |
| ACS76058 | SHIM, RIGGING PAX DOOR, SET OF 4 | 4 | |
| ACT825-1 | 2 FLTRS, 1 SHIM, LRG,SML GASKT | 1 | |
| AD-636678 | Shim gage to position | 1 | |
| AEGG12547 | SHIM SETTING ASSEMBLY TOOL | 2 | |
| AFNDT-2113/2024 | 10 PIECE SHIM THICKNESS SET. SHIM SIZE: 0.787" x 0.787". THICKNESSES: .020", .032", .040", .050", .063", .070", .080", .090", .100", .125". Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2113/7075 | 10 PIECE SHIM THICKNESS SET. SHIM SIZE: 0.787" x 0.787". THICKNESSES: .020", .032", .040", .050", .063", .070", .080", .090", .100", .125". Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2120 | CUSTOM EDDY CURRENT BLOCK, 4340, 4X1X.250, EDM .2MM, .5MM, 1.0MM X .005±.002. ADD.003 NON-CONDUCTIVE SHIMS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3280 | Surface reference standard, 4340 Steel, with EDM notch depths of 0.5mm", 1.0" and 2.0mm +/-1.3mm, Notch Width: .18mm Max. Depth: +/- .03mm. Reference standard overall dImensions 25.4mm X 101.6mm X 6.4mm). Includeds .020" thick shim and Key Ring. Supplie | 1 | |
| AFNDT-3347CS | EDDY CURRENT WELD SURFACE REFERENCE STANDARD. EDM NOTCHES: 0.5mm, 1.0mm, 2.0mm (.1mm (.004") WIDE ± .05mm( .002") MAX WIDTH .152mm (.006"). MATERIAL: 4340 CARBON STEEL. SIZE: 1.0"W x 4.0"L Includeds 4 piece .020" thick shim and Key Ring set. Includes Tes | 1 | |
| AFT6355C0001-01-06 | PIN, SHIM ALIGNMENT, LONG | 1 | |
| AFT6355C0001-01-07 | PIN, SHIM ALIGNMENT, LONG | 1 | |
| AGE 13876 | SHIM GAGE | 1 | |
| AGE10228 | Shimming Fixture | 2 | |
| AGE10229 | Shimming Fixture | 2 | |
| AGE10248 | SHIMMING FIXTURE, DIFFERENTIAL SHAFT | 1 | |
| AGE10249 | GAUGE, SHIMMING | 1 | |
| AGE13876 | SHIM GAGE | 1 | |
| AGE15824 | SHIM GAGE | 1 | |
| AGE15825 | PLUG, SHIM | 1 | |
| AHM10395 | SHIM | 1 | |
| AS5731 | QQI SHIMS | 1 | |
| ASM DTL-22499/1 | LAMINATED SHIM | 1 | |
| ASTM A240 | DELAMINABLE STEEL SHIM | 1 | |
| B27030-78 | SHIM | 1 | |
| B27030-79 | SHIM | 1 | |
| B27045-12 | Shim Gauge Equipment | 2 | |
| B27045-13 | SHIM GAUGE | 1 | |
| B27045-5 | SHIM TOOL | 1 | |
| B27045-51 | SHIM GAGE -6 | 1 | |
| B71024-11 | SHIM | 1 | |
| B71024-12 | SHIM BLOCK | 1 | |
| BACB28BB05A107Z | BUSHIMG | 1 | |
| BACF3AB006BF006GF | FIBERGLASS SHIM HORIZONTAL AEROSTRIP | 1 | |
| BACS40R | SHIM-LAMINATED | 1 | |
| BACS40V009C021 | SHIM | 1 | |
| BL46249 | SHIM | 1 | |
| BL47834 | SET OF THRUST SHIM | 1 | |
| BL47835 | SET OF THRUST SHIM | 1 | |
| BL51333 | SET-OF THRUST SHIM | 1 | |
| BL51334 | SET-OF THRUST SHIM | 1 | |
| BL51336 | SET-OF THRUST SHIM | 1 | |
| BL52559 | SET-OF THRUST SHIM | 1 | |
| C27028-18 | LAMINATED SHIM | 1 | |
| C27036-1 | Shim Set Fwd | 8 | |
| C27036-4 | SHIM ANGLE | 1 | |
| C27045-5 | PRELOAD SHIM | 1 | |
| C27045-9 | SHIM | 1 | |
| C32046-1 | Holding Fixture Equipment - Shimmy Damper Assembly, Main Landing Gear | 10 | |
| C32046-25 | HOLDING FIXTURE EQUIPMENT - SHIMMY DAMPER ASSEMBLY, MAIN LANDING GEAR | 3 | |
| C321G1001101 | SHIM,ANTI-ROLL | 1 | |
| C47788 | SHIM | 1 | |
| C54014-28 | Shim | 1 | |
| C71003-36 | Shim | 1 | |
| C71003-37 | Shim | 1 | |
| CH1012-225 | SHIM GRINDING PLATE | 1 | |
| CH1012-226-1 | SHIM GRINDING PLATE | 1 | |
| CH1012-228 | SHIM GRINDING PLATE | 1 | |
| CH1012-228-1 | SHIM GRINDING PLATE | 1 | |
| CH1057-415 | SHIM GRINDING PLATE | 1 | |
| CH1057-416 | SHIM GRINDING PLATE | 1 | |
| CH1057-461 | SHIM GRINDING PLATE | 1 | |
| CH1057-462 | SHIM GRINDING PLATE | 1 | |
| CH1057-463 | SHIM GRINDING PLATE | 1 | |
| CH1057-464 | SHIM GRINDING PLATE | 1 | |
| CH1057-465 | SHIM GRINDING PLATE | 1 | |
| CH1057-466 | SHIM GRINDING PLATE | 1 | |
| CH1057-467 | SHIM GRINDING PLATE | 1 | |
| CH1057-468 | SHIM GRINDING PLATE | 1 | |
| CH1057-469 | SHIM GRINDING PLATE | 1 | |
| CH1057-470 | SHIM GRINDING PLATE | 1 | |
| CH1542-0248 | Shim Grinding Plate | 1 | |
| CH1542-0252 | Shim Grinding Plate | 1 | |
| CH1542-0253 | Shim Grinding Plate | 1 | |
| CH1542-0254 | Shim Grinding Plate | 1 | |
| CH1542-0255 | Shim Grinding Plate | 1 | |
| CH1542-0256 | Shim Grinding Plate | 1 | |
| CH1542-0256PM | SHIM GRINDING PLATE | 1 | |
| CH1542-0257 | Shim Grinding Plate | 1 | |
| CHA1542-0248 | SHIM GRINDING PLATE | 1 | |
| CHA1542-0252 | SHIM GRINDING PLATE | 1 | |
| CHA1542-0253 | SHIM GRINDING PLATE | 1 | |
| CHA1542-0254 | SHIM GRINDING PLATE | 1 | |
| CHA1542-0255 | SHIM GRINDING PLATE | 1 | |
| CHA1542-0257 | SHIM GRINDING PLATE | 1 | |
| CP17065 | SHIM PLATE | 1 | |
| D21851-5000 | LOW-PRESSURE TEST FIXTURE - ANTISHIMMY VALVE NLG A320NEO | 1 | |
| D227450001 | SPANNER ANTI-SHIMMY VALVE | 1 | |
| D50599 | SHIM | 1 | |
| D5337557820800 | SHIM | 1 | |
| D5391137420000 | SHIM | 1 | |
| D60775 | SHIM, REF.AMM FIG.ITEM:46, AIPC REF.:32211603A-220 | 1 | |
| E2G52532 | Setting Shim | 1 | |
| EAK0277J26A | KIT SHIM 1.0MM | 1 | |
| EC SHIM SET | 9 PIECE EDDY CURRENT SHIM THICKNESS SET. COLOR COATED THICKNESS RANGE FROM .0005"-.010 | 1 | |
| ECFSLIMDLX24 | CHARGING BASE SHIM | 1 | |
| F1276873 | TOOLING SHIM | 1 | |
| F1404017 | STTING SHIM | 1 | |
| F27449000 | SHIM MEASUREMENT TOOLKIT | 1 | |
| F27488000 | SHIM ETCH SUPPORT | 1 | |
| F27489000 | SHIM ETCH SUPPORT | 1 | |
| F28276000 | ADJUSTMENT TOOL WITH SETTING SHIMS (GS48354 GS48363) AND GAGE T47948 | 1 | |
| F46862 | SHIM | 1 | |
| F71136-38 | Shim | 1 | |
| F71136-43 | SHIM | 1 | |
| F71136-49 | Shim | 1 | |
| F71252 STC | SHIMMY DMAPNER SERVICE | 1 | |
| FGE-0.5X | Digital Force Gauge "Nidec-Shimpo Corporation" | 1 | |
| FGE-200XY | SHIMPO Digital Force Gauge, 200 lb., 4 Digit LCD | 1 | |
| FGE-50XY | SHIMPO FGE-50XY DIGITAL FORCE GAUGE,50 LBS.4 DIGIT | 1 | |
| FGV-100XY | CONTROL STICK FORCE MEASUREMENT (CYCLIC, COLLECTIVE) (NIDEC-SHIMPO FGV-100XY) | 3 | |
| FLAPABSTAND | DISTANCE SHIM | 1 | |
| G-604-324306-1 | KIT, SHIM BRAKE VALVE | 2 | |
| G27043-20 | SHIM | 1 | |
| G27046-25 | Shim 13 | 1 | |
| G34002-28 | SHIM | 1 | |
| G34002-29 | SHIM | 1 | |
| G34002-30 | SHIM | 1 | |
| G600-324307-1 | KIT - SHIM BRAKE VALVE ADJUSTMENT | 1 | |
| G601R271001-1 | SHIM | 5 | |
| G601R321103 | ADAPTOR SHIMMY DAMPER | 1 | |
| G604-324306-1 | KIT SHIM BRAKE VALVE ADJUSTMENT | 2 | |
| G604−324306−1 | Kit − Shim Brake Valve Adjustment | 2 | |
| G670-321103-1 | Adaptor Shimmy Damper | 4 | |
| G670-321103−1 | ADAPTOR SHIMMY DAMPER | 4 | |
| G670321103 | ADAPTOR SHIMMY DAMPER | 1 | |
| G670321103-1 | ADAPTER SHIMMY DAMPER | 4 | |
| G670−321103−1 | Adaptor Shimmy Damper | 4 | |
| GA32713 | BRAKE SHIM | 1 | |
| GRD AT | SUB-ITEM 2 FOR PN AEGG12547 (SHIM SET ASSY TOOL) | 1 | |
| GS10388 | SHIMMING SPACER | 1 | |
| GS10675 | THROTTLE VALVE SHIMMING KIT | 1 | |
| GS10885-1 | FIXTURE-LIMITING LINKAGE SHIMMING | 1 | |
| GS12631-1 | FIXTURE – P3 BELLOWS SHIMMING | 1 | |
| GS13616-1 | CAM FOLLOWER SHIMMING FIXTURE | 1 | |
| GS13713-1 | FIXTURE SHIMMING | 1 | |
| GS13777-1 | SHIMMING BLOCK, DROOP LINKAGE | 2 | |
| GS15396-1 | BLOCK SHIMMING | 1 | |
| GS15427-1 | BELLOWS SHIMMING FIXTURE | 1 | |
| GS15652-1 | ROTOR SHIMMING FIXTURE | 2 | |
| GS15681-1 | SHIMMING FIX. HIGH PRESSURE VALVE | 1 | |
| GS15691-1 | FIXTURE, SHUT OFF VLV SHIM | 1 | |
| GS15712-1 | FIXTURE, SHIMMING, PILOT VALVE VG | 1 | |
| GS15786-1 | SHIMMING FIXTURE | 1 | |
| GS15818-1 | DIFFERENTIAL GEAR SHIMMING FIXTURE | 1 | |
| GS16180-1 | FIXTURE, SHIM NG OVERSPEED VLV | 1 | |
| GS19719-1 | SHIMMING, SCREW | 1 | |
| GS19740-1 | BETA SHIMMING FIXTURE | 1 | |
| GS19850-1 | SHIM FIXTURE | 2 | |
| GS20075-1 | Shimming Fixture | 1 | |
| GS20394-1 | FIXTURE, BETA VALVE SHIM | 2 | |
| GS20443-1 | FIXTURE, SHIMMING | 1 | |
| GS20754-1 | KIT, PINS, SHIMMING | 1 | |
| GS20851-1 | BETA SHIM FIXTURE | 2 | |
| GS208511 | BETA SHIM FIXTURE | 2 | |
| GS20968-38 | SHIM .005 | 2 | |
| GS20968-39 | SHIM .010 | 2 | |
| GS20968-40 | SHIM .015 | 1 | |
| GS20968-41 | SHIM .020 | 1 | |
| GS22016-1 | RING, SHIMMING | 1 | |
| GS22927-1 | SHIMMING FIXTURE | 1 | |
| GS23003-1 | SHIMMING FIXTURE | 3 | |
| GS23005-1 | BETA SHIM GAGE | 1 | |
| GS23052-1 | SHIMMING GAGE | 1 | |
| GS23428-1 | ACTUATOR SHIM FIXTURE | 1 | |
| GS24282-1 | SHIMMING FIXTURE | 1 | |
| GS24283 | Shimming Fixture | 1 | |
| GS24284-1 | SHIMMING RING SET | 1 | |
| GS24527-1 | ACTUATOR SHIM FIXTURE | 1 | |
| H3090 | SHIM: SLOTTED, | 1 | |
| HS7877 | FIXTURE - GAGING,SHIM THICKNESS | 1 | |
| HS7909 | FIXTURE-GAGING, SHIM THICKNESS | 1 | |
| HS7963 | FIXTURE-GAGING,SHIM THICKNESS | 1 | |
| HS8129 | TOPPING LINKAGE SHIM GUIDE | 1 | |
| HS8218 | FIXTURE - GAGING SHIM THICKNESS | 1 | |
| HT307832 | SHIM LOAD FIXTURE | 1 | |
| HT307833 | SHIM LOAD FIXTURE | 1 | |
| HU28060 | SHIM | 1 | |
| HU28061 | SHIM | 1 | |
| HU28062 | SHIM | 1 | |
| HU28063 | SHIM | 1 | |
| IAE1R18757 | CURVED SHIM | 12 | |
| IAE1R19313 | CURVED SHIM | 7 | |
| IAG-280-01 | SHIM SET | 1 | |
| J27017-10 | Shim | 1 | |
| J27017-11 | SHIM | 1 | |
| J27017-9 | SHIM | 1 | |
| J32015-5 | TAPERED SHIM | 1 | |
| J32018-14 | STOP SHIM JIG | 13 | |
| J32038-49 | SHIM BLOCK | 1 | |
| J32038-50 | SHIM BLOCK | 1 | |
| J32038-51 | SHIM BLOCK | 1 | |
| J32069-141 | A SHIM | 2 | |
| J32069-143 | B SHIM | 1 | |
| J32069-144 | B SHIM | 1 | |
| J32069-19 | B SHIM | 1 | |
| J32069-65 | A SHIM | 1 | |
| J32082-66 | Shim | 1 | |
| J32082-72 | Shim | 1 | |
| J47138 | ADAPTOR FOR HOLDING ANTI-SHIMMY VALVE | 2 | |
| JW8097572 | KIT SHIMS FOR BLADES MEASURMET | 1 | |
| JW81-97125 | KIT SHIMS FOR BLADES MEASURMET | 1 | |
| JW97116 | KIT SHIMS FOR BLADES MEASURMET | 1 | |
| JW97468 | KIT SHIMS FOR BLADES MEASURMET | 1 | |
| K27022-6 | Shim 001 | 1 | |
| K27022-7 | Shim 005 | 1 | |
| K27022-8 | Shim 010 | 1 | |
| K56003-1 | REMOVAL SHIM - PASSENGER WINDOWS | 7 | |
| LAG 2463A | ASSEMBLY SHIM (2 ITEMS) | 1 | |
| LAG-2944 | TEST SHIMS | 1 | |
| LL1007A035 | SHIM GRINDING PLATE | 1 | |
| LL1007A036 | SHIM GRINDING PLATE | 1 | |
| LL1007A048 | SLAVE SHIM | 1 | |
| LL1007A066 | SHIM GRINDING PLATE | 1 | |
| LL519A025 | SHIM | 1 | |
| LL519A036 | SHIM | 1 | |
| LL537A153 | SHIM SETTING TOOL | 1 | |
| LL921A034 | SHIM GRINDING PLATE | 1 | |
| LL921A035 | SHIM GRINDING PLATE | 1 | |
| LL921A036 | SHIM GRINDING PLATE | 1 | |
| LL921A037 | SHIM GRINDING PLATE | 1 | |
| LL921A038 | SHIM GRINDING PLATE | 1 | |
| LL921A039 | SHIM GRINDING PLATE | 1 | |
| LL924A016 | SHIM GRINDING PLATE | 1 | |
| LL924A017 | SHIM GRINDING PLATE | 1 | |
| LL924A018 | SHIM GRINDING PLATE | 1 | |
| LL954A092 | SHIM GRINDING PLATE | 1 | |
| LL954A093 | SHIM GRINDING PLATE | 1 | |
| LL954A094 | SHIM GRINDING PLATE | 1 | |
| LL954A095 | SHIM GRINDING PLATE | 1 | |
| LLA547A063 | SHIM SETTING GAUGE | 1 | |
| LTCT 30333 | SHIM GAP CHECK GAGE | 1 | |
| LTCT127525-01 | 6NG SHIM | 1 | |
| LTCT23681-01 | SHIM | 1 | |
| LTCT23767-01 | SHIM | 1 | |
| LTCT30333 | TK SHIM GAP CHECKING GAGE "A/B" | 1 | |
| LTCT30366 | TK SHIM SELECTION SIMULATOR GAGE | 1 | |
| LTCT7506-01 | Kit, Shims | 1 | |
| M46226 | COMPRESSION TOOL - ANTISHIMMY VALVE NLG A320NEO | 4 | |
| M46227 | TEST FIXTURE - ANTISHIMMY VALVE NLG A320NEO | 4 | |
| M58891A0000-01 | MEASURING SHIM | 1 | |
| M65723569 | DUMMY SHIM | 1 | |
| M65724073 | FALSE SHIM | 1 | |
| M65724073A | FALSE SHIM | 1 | |
| M65724556 | SHIM | 1 | |
| MAT P11D CHDN | SUB-ITEM 1 FOR PN AEGG12547 (SHIM SET ASSY TOOL) | 1 | |
| ME5E19 | SHIM | 1 | |
| MF-20 KG | SHIMPO FORCE, GAUGE (MF-20 KG) TEST SET | 1 | |
| MF-20KG | SHIMPO FORCE, GAUGE (MF-20 KG) TEST SET | 1 | |
| MIL-S-22499/3 | DELAMINABLE STEEL SHIM 0.5 MM, 1.6 MM OR 20 MM | 1 | |
| MIT311U0050SM2 | MISC TOOL, SPRING BEAM SHIMMING, UNDERWING FITTING GAP SET, OUTBD STRUT | 1 | |
| MIT65B01463 | SHIM - DOWNLOCK ACTUATOR REMOVAL AND INSTALLATION, BODY LANDING GEAR | 1 | |
| NDT1033-10 | ALUMINUM TO ALUMINUM SKIN REFERENCE STANDARD WITH A TOTAL OF 10 BONDED SHIMS .016"-.125" THICK. 100 THICKNESS COMBINATIONS WITH SIMULATED DISBOND DEFECTS. PART 4 51-00-01 | 4 | |
| NDT506 | Alum to alum core shim damage defect standard | 1 | |
| NDT629 | Alum to alum core shim damage defect standard | 2 | |
| OHME65B89601-5 | SHIM | 1 | |
| OS22935 | Shim Set, Special | 1 | |
| OTM775 | SHIM | 1 | |
| OWF930038 | KIT SHIMS FOR BLADES MEASURMET | 1 | |
| PF53467-4P | SHIMMY DAMPER CHARGING TOOL | 2 | |
| PS4-032 | SHIM | 1 | |
| PWA 33229 | SHIM | 1 | |
| PWA 81073 | SHIM, PROTECTIVE | 1 | |
| PWA102757 | SHIMS_[PWA102757] | 5 | |
| PWA116009 | ADAPTER WORK HPC SHIM | 1 | |
| PWA25712 | SHIM - ENG ASSY FAN BLADE TIPS_[PWA25712] | 2 | |
| PWA33229 | SHIM | 1 | |
| PWA33229FAS | SHIM (IN 0005378) | 1 | |
| PWA81073 | SHIM, PROTECTIVE | 1 | |
| PWC51021 | SHIM SPECIAL SET | 1 | |
| PWC63288-27 | SHIM PLATE | 1 | |
| PWC72688 | SHIMS AND CLOSING PLATE | 1 | |
| PWC85129 | Shim | 1 | |
| Q21833 | Shim Grinding Plate | 1 | |
| Q21833 PM | SHIM GRINDING PLATE | 1 | |
| Q21833PM | SHIM GRINDING PLATE | 1 | |
| QDS101467 | SHIMS | 1 | |
| R21898 | GRADUATED QUADRANT - ANTISHIMMY VALVE NLG A320NEO | 2 | |
| R47651 | SHIM | 1 | |
| R5311527520400 | SHIM Y+/-790(40X20 1.6 MM THICK) | 1 | |
| RB EMC35A-73-13.105 | Shimming Fixture, .105" | 1 | |
| RB EMC35A-73-13.256 | Shimming Fixture, .256" | 1 | |
| RB T101529-29 | Shim .700 X .390 X .001 Stainless | 1 | |
| RBE332A93-3090-00 | SHIM KIT | 2 | |
| RBE350A96-3203-20 | Tool, Shim, Main Gear Box | 1 | |
| RBE350A96-3203-22 | Tool, Shim | 2 | |
| RBE703A94-2790-00 | Binding Servo Control Test Shim | 2 | |
| RBT18551 | Swashplate Shim Bolts | 1 | |
| RO25-032 | SHIM | 1 | |
| RR shim replacement | RR pylon mid bulkhead upper shim replacement kit 90 degree drill | 1 | |
| RRT109042 | PEEN SHIM TOOL | 1 | |
| RSW-0512M-316 | Weldscan Test Block w/Shims, 316SS, with .5, 1 and 2 mm deep surface notches | 1 | |
| S2521038600200 | SHIM TOOL BALL | 6 | |
| SA30252 | SHIM-BRAKE ASSY | 1 | |
| SBC20225-32-3299-3301 | SHIM INSTALATION | 1 | |
| SCA2GAL-SDF | SHIMMY DAMPER CHARGING TOOL | 1 | |
| SCI09A108-9-REVA2 | BATTERY SHIM | 1 | |
| SG 350A96-3203-22 | SHIM, MGB PLANET GEAR | 1 | |
| SHIM | SHIM (IN 0005378) | 1 | |
| SHIM KIT | SHIM KIT | 1 | |
| SHIMS/.050 | SHIM | 1 | |
| SHIMS/.090 | SHIM | 1 | |
| SK20977-1006 | DRAIN - ANTISHIMMY VALVE NLG A320NEO | 2 | |
| SK382-55-073-1 | ELEVATOR TORQUE TUBE SHIM REPA | 1 | |
| SMS0 | SHIMS | 1 | |
| SMS1 | USTOOL RIVET SET SPACER SHIM 1/32 INCH | 1 | |
| SMS2 | SHIMS | 1 | |
| SP67651 | SHIM | 1 | |
| SPL-12962 | MEC INSTALLATION SHIM KIT | 1 | |
| SPSWG-96 | BEARING/SHIM SET | 1 | |
| STD-14974 | SHIM -0.008 INCH(0.200 MM) | 1 | |
| STK32921 | EASY AIR SHIM INFLATABLE PRY B | 1 | |
| STK32925 | MINI EASY AIR SHIM INFLATABLE | 1 | |
| SWM8-SDIN988 | METRIC STEEL SHIM DIN988 (8 ID X 14 OD X .5MM) | 1 | |
| T-00741 | SHIMMY DAMPER SPECIAL TOOL | 1 | |
| T-00893-1 | Rotor Shimming Fixture | 1 | |
| T00741 | SHIMMI DAMPER SPECIAL TOOL | 1 | |
| T01541725-1 | SHIM | 1 | |
| T101529-29 | SHIM | 1 | |
| T25792 | ADJUSTING SHIM - THROTTLE | 1 | |
| T3608-04 | SHIM TOOL | 1 | |
| T71884 | CURVED SHIM | 15 | |
| T99022255-7C | SHIM (MIN7) SET | 1 | |
| TB3034G001 | MEASURMENT SHIM | 1 | |
| TK 2281/936 | SHIMMY DAMPER ADJUSTMENT TOOL | 1 | |
| TK2281/936 | SHIMMY DAMPER ADJUSTMENT TOOL | 1 | |
| TM1638P001 | SHIM 1 | 1 | |
| TM1638P002 | SHIM 2 | 1 | |
| TM1638P003 | SHIM 3 | 1 | |
| TM1638P004 | SHIM 4 | 1 | |
| TM5307G001 | SHIM | 1 | |
| U21905200 | LOW-PRESSURE TEST FIXTURE - ANTISHIMMY VALVE NLG A320NEO | 1 | |
| U8779068 | SET OF NON-CONDUCTIVE PLASTIC SHIMS | 1 | |
| VEI-T1-0299 | SHIM TOOL | 1 | |
| WK3863307-1 | SHIM (0.010IN.(0.25MM)) | 1 | |
| WK3863307-2 | SHIM (0.015IN.(0.38MM)) | 1 | |
| WK3863307-6 | SHIM (0.016IN.(0.40MM)) | 1 | |
| WK3863309-14 | SHIM(0.010IN.(0.25MM)) | 1 | |
| WK3863309-3 | SHIM(0.020IN(0.50MM)) | 1 | |
| WT-107901 | MAXIMUM N1 SHIM TOOL (BAUER INC.) | 2 | |
| WT107901 | MAXIMUM N1 SHIM TOOL | 2 | |
| Z-2168-01 | Extension Shim Plate - 1" | 6 | |
| Z-2169-01 | Extension Shim Plate - 2" | 7 | |
| 98A27803003000 | SHIM,USED TO CHECK MINIMUM GAP | 9 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
