| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| HS8785 | SHAFT ADAP | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 00711011N | SHAFT ADAPTER | 1 | |
| 10C1105G02 | ADAPTER, TORQUE, COUPLING NUT - FAN MAINTENANCE UNIT TO FAN MID SHAFT (TORQUE ADAPTER) | 1 | |
| 11C3129 | ADAPTER - TORQUE FAN SHAFT EXTERNAL NUT AND SENSOR - SHAFT NUT | 1 | |
| 11C3129G03 | ADAPTER, TORQUE FAN SHAFT EXTERNAL NUT AND SENSOR, SHAFT NUT | 1 | |
| 11C3515 | ADAPTER - THREAD - LPT CONE SHAFT | 1 | |
| 11C3603 | ADAPTER TOOL SHAFT MID FAN | 1 | |
| 11C4565 | ADAPTER - TORQUE LPT SHAFT TO ELECTRONIC | 1 | |
| 1C6807 | BRACKET SET, ADAPTER-LPTR AFT SHAFT TO 2C6001G01 | 1 | |
| 1C6807G01 | ADAPTER BRACKETS, AFT SHAFT - PT ROTOR | 1 | |
| 1C8344 | PULLER, SHAFT- FORWARD ADAPTER | 1 | |
| 1C8344G01 | Puller Shaft - Forward Adapter, LPT | 1 | |
| 1C9186 | ADAPTER, SLEEVE-LP TURB ROTOR SHAFT | 1 | |
| 1C9316G01 | ADAPTER, SLEEVE - LPT ROTOR SHAFT | 1 | |
| 1C9316G02 | Adapter, Sleeve LPT Rotor Shaft | 1 | |
| 2024047-1 | Shaft Adapter | 1 | |
| 2024825-1 | Shaft Adapter | 1 | |
| 21C7439P01 | GAS GENERATOR SHAFT TIE-BOLTS RESTRAINING ADAPTER | 1 | |
| 21C7714G01 | OUTPUT SHAFT ASSEMBLY INSPECTION ADAPTER | 1 | |
| 2895071 | ADAPTOR-TORQUE WRENCH,APU G/SHAFT | 2 | |
| 23005426 | Guide â Spur Adapter, Gear shaft | 4 | |
| 23006764 | GAGE-RETAINING RING, SPUR ADAPTER GEAR SHAFT | 2 | |
| 23006778 | GUIDE BEARING SPUR ADAPTER GEARSHAFT (PM) | 5 | |
| 23006778- | GUIDE BEARING SPUR ADAPTER GEARSHAFT (PM) | 5 | |
| 23006784 | SPUR ADAPTER SHAFT GUIDE | 2 | |
| 23052530 | Adapter – Drive, Starter Shaft, PU Access Drive | 2 | |
| 23054762 | Adapter – Support, Long Shaft to Pedestal | 1 | |
| 23058497 | Adapter – Compressor Forward Shaft Holding | 1 | |
| 23068615 | Adapter – Support, Compressor Rotor, Forward Shaft | 1 | |
| 18903010000 | SHAFT ADAPTER | 1 | |
| 269A9291 | Wrench Adapter Preload Ls Shaft | 2 | |
| 269T9211-003 | Drive Shaft Coupling Adapter Spanner Wrench | 1 | |
| 289539-1 | ADAPTER BALANCING SHAFT | 1 | |
| 289540-1 | ADAPTER SHAFT RETAINING | 1 | |
| 289558-1 | ADAPTER THRUST SHAFT AND BEARING | 1 | |
| 291189-1 | BUTTERFLY SHAFT ADAPTER | 1 | |
| 291615-1 | ADAPTER ASSY ALTERNATOR PLUG DRIVE SHAFT | 1 | |
| 291993-1 | BALANCING GEARSHAFT ADAPTER ASSEMBL | 1 | |
| 294866-6 | BEARING REMOVAL ADAPTER (LOCATES LARGER INSIDE DIAMETER OF 3860180-2 SPUR GEARSHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEARSHAFT FROM 3605094-1 BEARING | 1 | |
| 294891-1 | DRIVEN COMPRESSOR HOLDER ADAPTER (TO FIT SHAFT OF 294886-1 ROTATING ASSEMBLY HOLDER THAT WILL LOCATE THE INSIDE DIAMETER OF 3822075-2 MAIN SHAFT) | 1 | |
| 294896-1 | TORQUE WRENCH ADAPTER (TO TORQUE 3822056-1 NUT ON 38220752 MAIN SHAFT) | 1 | |
| 297641-1 | ADAPTER, SHAFT, STRETCH | 1 | |
| 297642-2 | ADAPTER, SHAFT, STRETCHING | 1 | |
| 298062-11 | INSTALLER, STARTER SHAFT SPLINE ADAPTER | 1 | |
| 298062-13 | REMOVER,STARTER SHAFT SPLINE ADAPTER | 1 | |
| 298262-1 | Oil Pump Assembly Adapter And Shaft Assembly | 1 | |
| 298341-1 | ADAPTER, SHAFT, OIL PUMP TEST | 1 | |
| 2C14093 | ADAPTOR, TORQUE,COUPLING NUT-LPT MID SHAFT | 1 | |
| 2C14093G03 | ADAPTOR, TORQUE,COUPLING NUT-LPT MID SHAFT | 6 | |
| 2C14113G01 | FIXTURE, INSTALL AND REMOVE-COMP.ROTOR FWD. SHAFT SPLINE ADAPTER | 3 | |
| 2C14199P102 | BEARING ADAPTOR SHAFT | 1 | |
| 2C5241 | ADAPTER FAN SHAFT LOCKNUT | 1 | |
| 2C5241G01 | ADAPTER, FAN SHAFT LOCKNUT TORQUE | 1 | |
| 2C6173 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | 1 | |
| 2C6363G01 | ADAPTERS, PEDESTAL - FAN MIDSHAFT | 1 | |
| 2C6363G01TK | ADAPTERS, PEDESTAL-FAN MID SHAFT | 1 | |
| 2C6I73 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | 1 | |
| 2C81011 | ADAPT, HOIST DR SHAFT FAN CF34 | 1 | |
| 2C81011G01 | ADAPTER, FAN DRIVE SHAFT HOIST | 1 | |
| 2C81046G01 | ADAPTER, LPT-TO-FAN DRIVE SHAFT | 2 | |
| 2C81103 ADA | ADAPTER - TORQUE - LOCKNUT - FAN TO FAN DRIVESHAFT | 1 | |
| 2C81464G01 | ADAPTER TORQUE HPTLOCKNUT FAN DRIVE SHAFT | 1 | |
| 2C91046G01 | ADAPTER, COMPRESSOR ROTOR REAR SHAFT HOIST | 1 | |
| 2C91050G01 | ADAPTER - FAN SHAFT | 1 | |
| 2C91074G01 | ADAPTER - FAN DRIVE SHAFT | 1 | |
| 3402491-1 | ADAP, ASSY, SHAFT, PROP, ENG, MOUNT & TRUCK | 1 | |
| 35889 | Adaptor - grease gun flap shaft joints | 1 | |
| 365A93-3100-00 | ROTOR SHAFT NUT ADAPTOR | 1 | |
| 365A93310000 | ROTOR SHAFT NUT ADAPTOR | 1 | |
| 404708-1 | ADAP, ASSY, SHAFT, PROP, ENG, MOUNT & TRUCK | 1 | |
| 550T05862-401 | ADAPTER ASSY FLEXIBLE SHAFT | 1 | |
| 6610-20560-01-T | SHAFT (ADAPTER) | 1 | |
| 6796265 | PULLER - TURB COUPLING SHAFT ADAPTER | 1 | |
| 6796359 | ADAPTER - HOLDING, NO. 60 PROPELLER SHAFT | 4 | |
| 6796568 | ADAPTER - TORQUE, COORDINATOR CONTROL SHAFT | 2 | |
| 6796635 | ADAP, PULLER, PROP SHAFT THRUST BRG. | 1 | |
| 6796651 | PROP SHAFT SEAL ADAPTER | 2 | |
| 6797175 | PULLER - TURBINE COUPLING SHAFT ADAPTER | 1 | |
| 6797179 | DRIFT - TURBINE COUPLING SHAFT ADAPTER | 1 | |
| 6797236 | ADAPTER, HOLDING, #60 PROPELLER SHAFT | 1 | |
| 6797313 | ADAPTER TORQUE CO-ORDINATOR CONTROL SHAFT | 1 | |
| 6798981 | ADAPTER PROPELLER SHAFT SPLINED | 1 | |
| 6872646 | GUIDE一SPUR ADAPTER GEARSHAFT BEARING | 2 | |
| 6893501 | DRIFT - SPUR ADAPTER GEARSHAFT | 1 | |
| 6893503 | GAGE--SPLINE, SPUR ADAPTER GEARSHAFT AND SECOND-STAGE SPLINED ADAPTER CHECKING | 2 | |
| 460004750 | MLG TORQUE SHAFT ADAPTOR | 2 | |
| 833978-5 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEAR SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | 1 | |
| 833978-9 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 834415-1 | SHAFT ADAPTER | 1 | |
| 834415-2 | SHAFT ADAPTER | 1 | |
| 834415-3 | Shaft Adapter | 1 | |
| 834415-4 | Shaft Adapter | 1 | |
| 834415-4PM | SHAFT ADAPTER | 1 | |
| 834645-1 | SET ADAPTOR MAINTENANCE SHAFT | 2 | |
| 83820100 | SCREWSHAFT HOLDING ADAPTOR | 1 | |
| 83820102 | SCREWSHAFT HOLDING ADAPTOR | 1 | |
| 856A2362G01 | LPT SHAFT REM/INSTALL ADAPTOR - CFM56-5 | 4 | |
| 856A2573 | ADAPTER, PULLER - LPT SHAFT PLUG (PULLER ADAPTER) | 2 | |
| 856A2573G01 | ADAPTOR PULL LP SHAFT PLUG | 6 | |
| 856A2632G01 | PULL LPT-SHAFT PLUG ADAPTER | 23 | |
| 856A2985 | DRIVE ADAPTER-BOOSTER/LPT SHAFT | 1 | |
| 856A2985G01 | DRIVE ADAPTER-BOOSTER/LPT SHAFT | 4 | |
| 856A3118 | ADAPTER AXIAL LOAD FAN SHAFT | 1 | |
| 856A3455G01 | BALANCING DRIVE ADAPTER - FWD LPT SHAFT | 2 | |
| 856A3468G01 | ADAPTER DRIVE FORWARD LPT SHAFT BALANCING | 1 | |
| 8C2539 | ADAPTER, TORQUE FAN SHAFT EXTENSION NUT AND SENSOR, SHAFT NUT | 1 | |
| 913789-1 | SHAFT ADAPTER | 1 | |
| 9458M56 | ADAPTER, SHAFT | 1 | |
| 956A1259 | ADAPTER - GUIDE - HPC FWD SHAFT | 1 | |
| 956A3259 | ADAPTER - GUIDE - HIGH PRESSURE COMPRESSOR FORWARD SHAFT | 1 | |
| 956A6674 | SLIDE HAMMER & ADAPTER - TGB TRANSFERT SHAFT | 2 | |
| 956A6674G02 | SLIDE HAMMER AND ADAPTER TGB TRANSFER SHAFT | 4 | |
| 98A27508061000 | ADAPTER-FLAP DRIVE SHAFT,WING | 1 | |
| 98A27508062000 | ADAPTER - FLAP DRIVE SHAFT LH-RH WING | 3 | |
| 98A27808003000 | Adapter fuer torque shaft drive tool-24 teeth | 3 | |
| 98A27808003001 | Adapter fuer torque shaft drive tool-24 teeth | 15 | |
| 98A27808003200 | ADAPTOR TORQUE SHAFT | 1 | |
| 98A27808003400 | ADAPTOR TORQUE SHAFT | 1 | |
| 9C2000 | ADAPTER,TOOL SHAFT | 1 | |
| 9C2115G02 | ADVANCE WRENCH ADAPTER - FAN SHAFT EXTENSION NUT | 1 | |
| A-C148659-1/13 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
| A-C148659-113 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
| AFLX-6.5 | ADAPTOR, MICRODOT FEMALE TO MAKE W/COPPER SHAFT, 6.5" TOTAL LENGTH 3" WORKING LENGTH | 1 | |
| AFLXR-6.5 | ADAPTOR, MICRODOT FEMALE TO RIGHT ANGLE MALE W/6.5" COPPER SHAFT | 1 | |
| AGE---00586-001 | ADAPTER - FLAP FLEX-IBLE SHAFT | 5 | |
| AGE-00545-001 | ADAPTER - FLAP FLEX-IBLE SHAFT | 1 | |
| AGE-00568-001 | ADAPTER - FLAP FLEXIBLE SHAFT | 1 | |
| AGE-00586-001 | ADAPTER - FLAP FLEX-IBLE SHAFT | 5 | |
| A−C148659−1/13 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
| B27029 | LUG SPANNER -0 TORQUE ADAPTER, RUDDER JACKSHAFT | 1 | |
| B27029-1 | LUG SPANNER - TORQUE ADAPTER, RUDDER JACKSHAFT | 1 | |
| B28009-1 | ADAPTOR SHAFT ALIGMENT TOOL | 19 | |
| B76004-1 | ADAPTER - THRUST CONTROL INNER SHAFT 76-10-03 | 1 | |
| B78016-9 | ADAPTER - WORM GEAR SHAFT (B78016-9 IS INCLUDED IN B78016-1) | 4 | |
| C-12003-1 | RAM AIR INLET MODULATION SHAFT LUBRICATION ADAPTOR | 5 | |
| C12003-1 | Adapter Nozzle - Ram Air Inlet Modulation Shaft | 5 | |
| CH1057-280 | ADAPTOR - TORQUE SHAFT | 1 | |
| DMFLX-13 | Adaptor, Dual Microdot Female to Male w/ 13" copper shaft | 1 | |
| E0006 | Adapter Gearbox Drive Shaft | 1 | |
| E0013 | Grease Gun Adapter Gearbox Drive Shaft | 1 | |
| F70067 | ADAPTER -0 SPLINED SHAFT,INBD.FLAP DRIVE USED TO | 1 | |
| F72899 | WRENCH ADAPTER -0 MLG MAN EXT SHAFT BRG RETAINER | 1 | |
| F72899-1 | Wrench adapter-MLG man ext shaft BRG retainer unt | 1 | |
| FJC 04-35-40000-123 | L/H MAINT SHAFT ADAPTER | 1 | |
| FJC 04-35-40000-129 | R/H MAIN SHAFT ADAPTER | 1 | |
| FJC 04-35-40000-131 | NOSE WHEEL SHAFT ADAPTER | 1 | |
| GS11865 | PULLER - SHAFT ADAPTER | 1 | |
| GSE-064 | ADAPTER-FLAP FLEXIBLE SHAFT | 1 | |
| HA-23005426 | GUIDE Ã?? SPUR ADAPTER, GEAR SHAFT | 1 | |
| HC130H0103-000 | Adaptor - drive flap shaft | 4 | |
| HU29227 | REAR SLINGING ADAPTOR LP COMP SHAFT ASSY | 1 | |
| IAE1R18673_A | Stub shaft Dummy Adapter | 1 | |
| J47201 | Adapter for shaft D46242 | 8 | |
| K24001-117 | Shaft Adapter | 1 | |
| LTCT23503 | Adapter, Shaft | 1 | |
| ME9026-0300 | ACTUATOR DRIVE SHAFT ADAPTER | 1 | |
| MFLX-10 | Adaptor, Microdot Female to Male w/ 10" copper shaft | 1 | |
| MFLX-20 | Adaptor, Microdot Female to Male w/ 20" copper shaft | 1 | |
| MFLX-4 | Adaptor, Microdot Female to Male w/ 4" copper shaft | 1 | |
| MFLX-5 | Adaptor, Microdot Female to Male w/ 5" copper shaft | 1 | |
| MFLX-6 | Adaptor, Microdot Female to Male w/ 6" copper shaft | 2 | |
| MFLX-8 | Adaptor, Microdot Female to Male w/ copper shaft, 8" OAL | 1 | |
| MFLX90-6 | ADAPTOR, MICRODOT FEMALE TO RIGHT ANGLE MALE W/ 6" COPPER SHAFT | 1 | |
| MFLXR-10 | Adaptor, Microdot Female to Right Angle Male w/ 10" copper shaft | 1 | |
| MFLXR-6 | Adaptor, Microdot Female to Right Angle Male w/ 6" copper shaft | 2 | |
| MFLXR-8 | Adaptor, Microdot Female to Right Angle Male w/ 8" copper shaft | 1 | |
| MHC-12 | DRIVE SHAFT ADAPTER | 1 | |
| MIT65B92408-1 | ADAPTER SHAFT - ALIGNMENT FIXTURE | 9 | |
| PWA108351 | ADAPTOR REMOVAL LPT SHAFT | 1 | |
| PWA12443 | ADAPTER-HPT SHAFT | 5 | |
| PWA25026 | ADAPTER-WRENCH TURBINE SHAFT NUT | 2 | |
| PWA26871 | ADAPTER - TURBINE SHAFT FRONT FLANGE | 2 | |
| PWA26872 | ADAPTER-TURBINE SHAFT FRONT FLANGE | 3 | |
| PWA26873 | ADAPTER - FLANGE, LPC DRIVE TURB SHAFT_[PWA26873] | 2 | |
| PWA29989 | ADAPTER-R I TURBINE SHAFT NUT | 1 | |
| PWA75511 | ADAPTER-R I TURBINE SHAFT NUT | 1 | |
| PWA75574 | ADAPTER-LPT SHAFT REAR_[PWA75574] | 2 | |
| PWC 66625 | SHAFT ADAPTER | 4 | |
| PWC30368 | ADAPTER, STUBSHAFT | 1 | |
| PWC31327 | COLLAR ADAPTER, HP TURBINE SHAFT NUT | 1 | |
| PWC31400 | ADAPTER, JT15D-4 SERIES FAN SHAFT (PRE-SB7135/PRE-SB7318) | 1 | |
| PWC37030 | ADAPTER, MEASURING, OIL PUMP SHAFT BEARING | 1 | |
| PWC37502 | ADAPTER, MEASURING, UPPER TOWER SHAFT SPACER | 1 | |
| PWC37613 | Adapter, Propeller Shaft | 1 | |
| PWC37760 | Adapter SHAFT | 5 | |
| PWC38395 | ADAPTER STUBSHAFT | 1 | |
| PWC40580 | Adapter-SPLINE,GEARSHAFT | 1 | |
| PWC40601 | ROD ADAPTER, STUBSHAFT | 1 | |
| PWC40653 | Adapter SHAFT | 1 | |
| PWC42197 | Adapter Oil pump shaft | 1 | |
| PWC43266 | Adapter LC Shaft | 2 | |
| PWC45314 | ADAPTER-PROPSHAFT | 1 | |
| PWC50028 | Adapter Gearshaft | 1 | |
| PWC52077 | ADAPTER, FAN SHAFT | 1 | |
| PWC54082 | Adapter Stub Shaft | 5 | |
| PWC54267 | ADAPTER, HPT DISK/STUBSHAFT BALANCING | 1 | |
| PWC54386 | ADAPTER, MEASURING, OIL PUMP GEARSHAFT BACKLASH | 1 | |
| PWC56260 | ADAPTER, HPT DISK/STUBSHAFT, BALANCING | 1 | |
| PWC56845 | Adapter SHAFT | 1 | |
| PWC56870 | Adapter, Propeller Shaft | 1 | |
| PWC56871 | ADAPTER LIFTER SHAFT | 5 | |
| PWC57254 | Adapter-PT SHAFT | 1 | |
| PWC57573 | ADAPTER, SHAFT | 1 | |
| PWC60356 | Adapter Stud Shaft | 1 | |
| PWC61059 | Adapter,Gearshaft | 3 | |
| PWC61248 | ADAPTER-TIE SHAFT | 1 | |
| PWC61876 | TIE SHAFT ADAPTER | 1 | |
| PWC62679 | ADAPTER SHAFT LP | 3 | |
| PWC64821 | Adapter CPLG Shaft | 1 | |
| PWC64822 | Adapter CPLG Shaft | 1 | |
| PWC64823 | Adapter CPLG Shaft | 1 | |
| PWC66354 | Adapter SHAFT | 1 | |
| PWC66471 | ADAPTOR-SHAFT | 1 | |
| PWC66625 | ADAPTER SHAFT | 4 | |
| PWC66644 | ADAPTER SHAFT | 1 | |
| PWC67012 | ADAPTER SHAFT | 1 | |
| PWC67816 | ADAPTER SHAFT | 1 | |
| PWC67954 | Shaft adapter | 1 | |
| PWC70336 | ADAPTER-GEARSHAFT | 1 | |
| R2102 | ADAPTER: SHAFT,ST, RAT GTM | 1 | |
| RA-RAFX-6 | FLEX SHAFT ADAPTER FOR RECHII SCANNER MALE CONNECTOR TO RECHII RA PROBE, (4PIN STEP LEMO RECEPTACLE FEMALE CONNECTOR) WITH SLIDING COLLAR, 6.0" LONG. Includes Test Report and Certificate of Conformance | 1 | |
| RB T103013 | Wrench & Adapter, Collector Shaft | 1 | |
| RB23005426 | Guide - Spur Adapter Gearshaft C-30 | 2 | |
| RB23006778 | Guide Bearing Spur Adapter Gearshaft C-20 | 2 | |
| RB6798981 | Prop Shaft Splined Adapter | 1 | |
| RB6893501 | Drift-Spur Adapter Gearshaft | 2 | |
| RBA9957 | Main Rotor Drive Shaft Torque Adapter (Frdh101) | 2 | |
| RBT101588 | MAIN DRIVESHAFT / INPUT ADAPTER WRENCH | 2 | |
| RRT029946 | SHAFT ADAPTOR | 1 | |
| RT19H-TT1 | ADAPTER SHAFT | 1 | |
| RT19H-TT2 | ADAPTER SHAFT | 1 | |
| SDM-11 | ADAPTER FLEXIBLE DRIVE SHAFT | 6 | |
| SDM11 | Adapter − Flexible Shaft Drive | 6 | |
| SDM11A | ADAPTER - FLEXIBLE SHAFT DRIVE | 1 | |
| STD67669 | Torque Adapter-Main Drive Shaft | 1 | |
| STI3249 | ADAPTER TORQUE WRENCH INPUT SHAFT, ASSY | 1 | |
| T-25817 | ADAPTER, MOTOR DRIVE SHAFT TORQUE | 1 | |
| T101588 | MAIN DRIVESHAFT / INPUT ADAPTER WRENCH | 1 | |
| T25817 | Adapter, Motor Drive Shaft Torque | 1 | |
| lC6807 | BRACKET SET, ADAPTER-LPTR AFT SHAFT TO 2C600lG0l | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
