| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 856A1827G01 | SET - ADAPTER | 21 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98F27508278001 | ADAPTER ADAPTER SET - OPTICAL ALIGNMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27508278002 | ADAPTER ADAPTER SET - OPTICAL ALIGNMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S21305000000 | TOOL I/F ADC-VACUUM PUMP SET ADAPTERS | 1 | |
| 07-401B | Shank Adapters (Shank size: .401" Shank) (Accepts: .401" Shank Sets) (Overall length (without spring): 3-3/4"{ (95 mm)) (Add to cart: Add To Cart) | 1 | |
| 07-498A | Shank Adapters (Shank size: .401" Shank) (Accepts: .401" Shank Sets) (Overall length (without spring): 3-3/4"{ (95 mm)) (Add to cart: Add To Cart) (Shank size: .498" Shank) (Accepts: .498" Shank Sets) (Overall length (without spring): 3-3/4"{ (95 mm)) (Ad | 1 | |
| 07-70407 | Shank Adapter (For use with: .401 Shank Sets) (Overall length: 4-1/2" (114 mm)) (Add to cart: Add To Cart) | 1 | |
| 10-400-0192 | ADAPTER CASE BOLT ADAPTER (SET OF 8) - 3X699 | 1 | |
| 101-00808 | TEST SET-FUEL QUANTITY WITH HARNESS ADAPTER OR BARFIEL TESTER (WITCH 101-00808) | 7 | |
| 10C1022G01 | ADAPTER SET ASSEMBLY PEDESTAL - COMPRESSOR REAR FRAME, | 1 | |
| 11C3447P01 | ADAPTER, TORQUE - OFFSET | 1 | |
| 11C4566G04 | ADAPTER SET, MANIFOLD PRESSURE CHECK-FUEL | 1 | |
| 1206GS | ADAPTER SET-6 PCS | 6 | |
| 12BAK728 | SURFTEST SJ-210 POWER ADAPTER CORD SET | 1 | |
| 16U14503-5/-801 | PITOT-STATIC ADAPTER SET | 1 | |
| 178AS960 | ADAPTER, W53 AN/AWM-102 TEST SET | 1 | |
| 17G110637-1 | ADAPTER SET, HOISTING - ELEVATOR/AILERON/SLAT | 1 | |
| 18253G-18 | HEADSET PLUG ADAPTER (H10-66) | 3 | |
| 18253G05 | "ADAPTER - HEADSET (CONNECTOR U-92A/U TO PJ-055B/PJ-068) | 9 | |
| 18C1030 | PLUG/ADAPTER SET - NO 5 BRG HOUSING | 1 | |
| 190T06260-401 | ADAPTERS SET-LKG TEST, AUX FUEL SYS | 1 | |
| 190T06260-401 | ADAPTERS SET-LKG TEST, AUX FUEL SYS- | 1 | |
| 196T07750-401 | ADAPTERS SET, LEAK-AGE TEST - FIREX SYS | 1 | |
| 19C0903G01 | ADAPTER SET PRESSURE TEST/RIG - VIGV, VBV, VSV SPECIAL TOOL FOR VARIBLE BYPASS VALVE (VBV) REPLACEMENT AND CHECK | 1 | |
| 1C6167 | ADAPTER SET - ROLLER | 1 | |
| 1C6170 | ADAPTER SET, ROLLOR-POWER TURB | 1 | |
| 1C6807 | BRACKET SET, ADAPTER-LPTR AFT SHAFT TO 2C6001G01 | 1 | |
| 1C6831 | ADAPTER SET, STATIC BALANCE - PT ROTOR SUB-ASSEMBLIES | 1 | |
| 1C6831G02 | ADAPTER SET, STATIC BALANCE - PT ROTOR SUB-ASSEMBLIES | 1 | |
| 1C6881 | ADAPTER SET-FUEL MANIFOLD PR | 1 | |
| 1C6881G01 | ADAPTER SET-FUEL MANIFOLD PR | 1 | |
| 1C8444 | ADAPTER SET - ELECTRONIC PROTRACTOR-V STTR VANE RIGGING | 1 | |
| 1C9373G01 | ADAPTER SET - PEDESTAL TURBINE, REAR FRAME | 1 | |
| 1C9375 | ADAPTER SET ASSY - SUPPORT - AIR COLLECTOR - FWD | 1 | |
| 1C9375G01 | ADAPTER SET ASSY-SUPPORT AIR COLLECTOR | 1 | |
| 1C9377 | ADAPTER SET - SUPT. | 1 | |
| 1C9377G01 | ADAPTER SET ASSEMBLY - SUPPORT LPC FORWARD | 1 | |
| 1C9393 | ADAPTER SET, PRESSURE TEST/ RIG-VIGV, VBV AND VSV | 1 | |
| 1C9393G01 | ADAPTER SET PRESSURE TEST/RIG - VIGV, VBV, VSV SPECIAL TOOL FOR PRESSURE TEST | 2 | |
| 247C5185 | ADAPTER SET, AFT FLANGE - INTMD POWER TURBINE FRAME | 1 | |
| 247C5255 | ADAPTER SET - DOLLY - MANITENANCE | 1 | |
| 247C5256 | ADAPTER SET - MAINTENANCE DOLLY-IPT CASE | 1 | |
| 259-202702-4-3 | COM-22906 - ADAPTER - ALTITUDE PRESSURE SWITCH TO AIR DATA TEST SET | 1 | |
| 28-0-5011 | SET- ADAPTER LIFT DUMPER MECHANICAL | 2 | |
| 2C14178G01 | ADAPTER SET -PIEDESTAL-COMP REAR FRAME | 2 | |
| 2C14203 | ADAPTER SET, PEDESTAL-COMPR. REAR FRAME | 1 | |
| 2C14203 REV B | ADAPTER SET, PEDESTAL-COMPR. REAR FRAME | 1 | |
| 2C14203G01 | ADAPTER SET -PIEDESTAL-COMP REAR FRAME | 3 | |
| 2C14224 | ADAPTER SET, PEDESTAL-LPT MODULE, FWD | 1 | |
| 2C14224 REV B | ADAPTER SET, PEDESTAL-LPT MODULE, FWD | 1 | |
| 2C14224G02 | ADAPTER SET - PEDESTALS LPT MODULE FWD | 1 | |
| 2C14664 | TORQUE ADAPTER SET - RET NUT | 1 | |
| 2C14664G01 | TORQUE ADAPTER SET, RETAINER NUT -NO. 5R BEARING INNER RACE | 4 | |
| 2C14717 | ADAPTER SET, PEDESTAL - FAN STATOR FWD | 1 | |
| 2C14717 REV A | ADAPTER SET, PEDESTAL - FAN STATOR FWD | 1 | |
| 2C14717G01 | ADAPTER SET, PEDESTAL - FAN STATOR & UNDER G/B | 4 | |
| 2C14729G01 | ADAPTER SET, PEDESTAL - ENGINE AFT (ALTERNATE TO 2C14827G01) (PEDESTAL ADAPTER SET) | 4 | |
| 2C14729G01TK | ADAPTER SET, PEDESTAL-ENGINE AFT | 1 | |
| 2C14738G01 | ADAPTER SET - INSTALL/REMOVE, STAGE 1 FAN DISK NUTS | 2 | |
| 2C14827 | ADAPTER SET,PEDESTAL-ENGINE | 1 | |
| 2C14827G01 | ADAPTER SET, PEDESTAL - ENGINE AFT (PEDESTAL ADAPTER SET) | 1 | |
| 2C14856 | ADAPTER SET, SPANNER - AIRTUBE NUTS | 1 | |
| 2C18044 | ADAPTER SET ASSYPEDESTAL-COMPRESSOR REAR FRAME | 1 | |
| 2C18044G01 | ADAPTER SET ASSEMBLY, PEDESTAL - CRF | 1 | |
| 2C6937 | ADAPTER, TORQUE, SET-COMPRESSOR ROTOR | 1 | |
| 2C6937 REV U | ADAPTER, TORQUE, SET-COMPRESSOR ROTOR | 1 | |
| 2C7140G01 | ADAPTER SET-COMPRESSOR ROTOR | 1 | |
| 3281AS100-1 | ADAPTER SET, PITOT-STATIC | 1 | |
| 3300264-6001 | ADAPTER SET, TEST (M0D-A) | 1 | |
| 35M5M01160001 | SETTING TOOL - MICROSWITCH UNIT OR CABLE ADAPTER PLUG & OHMMETER (RANGE >1K OHM) | 2 | |
| 361-040-001 | GTF-2 TEST SET ADAPTER | 1 | |
| 460006234 | OFFSET ADAPTER - MLG A320NEO | 4 | |
| 47001-031-000 | Pedestal AdapterSet for LEAP-1B Engine | 1 | |
| 4MIT65B04008 | LUBE ADAPTER SET - FLAP TRAILING EDGE TORQUE TUBE COUPLINGS | 8 | |
| 53-2921 | THD SHANK ADAPTER DRILL SET 3/4" OAL 4 PC. 3/32"-3/16" | 1 | |
| 53-2961 | THD SHANK ADAPTER DRILL SET 4PC, FRACTIONAL, 1-1/4 | 1 | |
| 550T05661-401 | ADAPTERS SET-FUEL LEAKAGE TEST,NACA | 1 | |
| 550T05661-403 | ADAPTERS SET-FUEL LEAKAGE TEST,NACA | 1 | |
| 550T05670-401 | ADAPTER,SET-LASER TRACKER | 1 | |
| 550T05670-401 | ADAPTER,SET-LASER TRACKER | 1 | |
| 5MIT65B01500-1 | TORQUE ADAPTER SET - RETRACT ACTUATOR WING, NOSE AND BODY LANDING GEAR | 3 | |
| 601R57-048K92 | TOOL - COLD WORK KIT FOR OFFSET ADAPTER | 1 | |
| 635-6382-001 | 678P-1/2 (ASI-209-X) TEST SET ADAPTER FOR 628T-1/1B | 1 | |
| 6400-3-4-O | ADAPTER - ALTITUDE PRESSURE SWITCH TO AIR DATA TEST SET | 1 | |
| 6799877 | ADAPTER CABLE - TORQUEMETER RUNOUT TEST SET | 1 | |
| 6799878 | ADAPTER CABLE - TORQUEMETER RUNOUT TEST SET PHASE DETECTOR | 1 | |
| 6801-4-3 NOW | ADAPTER - ALTITUDE PRESSURE SWITCH TO AIR DATA TEST SET | 1 | |
| 6801-4-3 NWO | ADAPTER - ALTITUDE PRESSURE SWITCH TO AIR DATA TEST SET | 1 | |
| 7C2218 | ADAPTER SET - VSV ACTUATOR | 1 | |
| 8028181-10 | ADAPTER SET MHU-25 | 1 | |
| 835284 | Set-Adapter PWR Flush | 1 | |
| 8457784 | M-10 ADAPTER SET | 1 | |
| 856A1130G07 | TOOL SET - JACKSCREWS (JACKSCREWS) 12 856A1136 ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTI | 8 | |
| 856A1336 | ADAPTER SET, TORQUE-MAIN ENG. CONTROL FASTENERS | 5 | |
| 856A1336 REV C | ADAPTER SET, TORQUE-MAIN ENG. CONTROL FASTENERS | 1 | |
| 856A1336G02 | ADAPTER SET, TORQUE- MEC FASTENERS | 20 | |
| 856A1827G01 | Set-Adapter, Torque Hydromechanical UN&MN Fuel Pump Nuts | 21 | |
| 856A1827G01 | SET - ADAPTER, TORQUE HYDROMECHANICAL UN & MN FUEL PUMP NUTS | 21 | |
| 856A2201G02 | ADAPTER SET, VIBRATOR-COMPR ROTOR BLADES | 1 | |
| 856A2304G02 | ADAPTER TOOL SET, LIFT AND TURN - NO. 1 AND 2 BEARING SUPPORT (LIFT AND TURN ADAPTER) | 2 | |
| 856A3328G01 | TOOL SET, ADAPTER - NO. 1 AND NO. 2 BEARING OIL NOZZLES AIR IMPINGEMENT (ADAPTER TOOL SET) | 6 | |
| 856A3329G02 | TOOL SET - ADAPTER #1 /#2 AIR IMPINGMENT CHECK | 3 | |
| 856A3515G04 | TOOL SET, DRIVE ADAPTER - BOOSTER AND LPT (TOOL SET) | 9 | |
| 856A3524 | TOOL SET, DRIVE ADAPTER - BOOSTER AND LPT (TOOL SET) | 1 | |
| 856A3524G01 | TOOL SET, DRIVE ADAPTER - BOOSTER AND LPT | 14 | |
| 856A3551 | TOOL SET, REMOVAL/INSTALLATION - TRANSFER GEARBOX ADAPTER AND NIPPLE RESTRICTOR | 1 | |
| 856A3551G01 | TOOL SET, REMOVAL/INSTALLATION - TRANSFER GEARBOX ADAPTER AND NIPPLE rESTRICTOR | 6 | |
| 856A3721 | ADAPTER TOOL SET - LIFT AND TURN 1 &2 BEARING SUPPORT (TOOL SET) | 1 | |
| 856A3721G03 | Adapter Tool Set - Lift and Turn 1 &2 Bearing Support (tool set) | 11 | |
| 8768 | P-LEAD ADAPTER (COMPLETE SET) | 2 | |
| 8C2160 | ADAPTER SET, INSTALL/REMOVE - FORWARD HPC STATOR CASES | 1 | |
| 8C3488 | SET - PROTECTION PLUGS - AGBX - ADAPTER FP MANIFOLD | 1 | |
| 9400M83G01 | ADAPTER SET - HYDRAULIC LUBE SYSTEM | 1 | |
| 9426M27 | ADAPTER SET, SUPPORT-BOOSTER, AFT | 1 | |
| 9426M27 REV NC | ADAPTER SET, SUPPORT-BOOSTER, AFT | 1 | |
| 9426M31 | ADAPTER SET, SUPPORT-CORE ENGINE-FWD | 1 | |
| 9426M31 REV NC | ADAPTER SET, SUPPORT-CORE ENGINE-FWD | 1 | |
| 9429M63 | ADAPTER SET, FLOW CHECK-FRAMES, LUBE SYSTEM | 1 | |
| 9429M71 | ADAPTER SET, FLOW CHECK - FRAM | 1 | |
| 9471M47 | ADAPTER - OFFSET - CRANK PAD | 1 | |
| 9471M47G01 | ADAPTER, OFFSET - CRANK PAD | 1 | |
| 9471M47P01 | ADAPTER, OFFSET - CRANK PAD | 3 | |
| 9471M47P02 | ADAPTER - OFFSET, CRANK PAD | 2 | |
| 9481M92P03 | ADAPTER, OFFSET - CRANK PAD | 4 | |
| 956A1201 | ADAPTER SET - GUIDE - CDN | 1 | |
| 956A1209 | ADAPTER SET, MANIFOLD PRESSURE CHECK - FUEL | 1 | |
| 956A1209G01 | ADAPTER SET, MANIFOLD PRESSURE CHECK - FUEL | 1 | |
| 956A1209G02 | ADAPTER SET, MANIFOLD PRESSURE CHECK- FUEL | 1 | |
| 956A1320 | BRACKET SET - ADAPTER - TRF | 1 | |
| 956A1631G01 | ADAPTER SET - PRESSURE CHECK - FUEL MANIFOLD - LEAP 1A | 1 | |
| 956A1720 | ADAPTER SET - LIFT - CDN | 1 | |
| 956A3201 | ADAPTER SET - GUIDE - CDN | 1 | |
| 956A3209 | ADAPTER SET - MANIFOLD PRESSURE CHECK - FUEL | 1 | |
| 956A3209G01 | ADAPTER SET, MANIFOLD PRESSURE CHECK - FUEL | 1 | |
| 956A3209G02 | ADAPTER SET - MANIFOLD PRESSURE CHECK | 1 | |
| 956A3209G03 | ADAPTER SET-MANIFOLD | 1 | |
| 956A3240 | ADAPTER SET - COMPRESSOR STATOR - DUMMY | 1 | |
| 980N-1 | ASI-203 ALTIMETER TEST SET WITH CABLE ADAPTER | 8 | |
| 98AMS172327002 | TOOL SET-R I,THS OR WRENCH-ADAPTER - SECONDARY PINS | 12 | |
| 98AMS172333002 | TOOL SET-R I,THS OR ADAPTER-WRENCH - PRIMARY PINS | 13 | |
| 98D27407517000 | TOOL SET-R I,THS OR WRENCH-ADAPTER - SECONDARY PINS | 21 | |
| 98D32303000000 | ADAPTER, WRENCH-SOCKET SET NLG | 26 | |
| 98D34003500000 | SET ADAPTER/COVER-STATIC PORT SET | 31 | |
| 98D34103002000 | STATIC PORT ADAPTER (SPECIFIC TO AIRBUS PITOT-STATIC TEST SETS) | 32 | |
| 98D36109004000 | ADAPTER KIT - BLEED TEST SET | 6 | |
| 98F27508278000 | ADAPTER ADPATER SET-OPTICAL AL | 2 | |
| 98F27508278001 | ADAPTER ADAPTER SET -0 OPTICAL ALIGNMENT | 2 | |
| 98F27508278002 | ADAPTER ADAPTER SET -0 OPTICAL ALIGNMENT | 4 | |
| 98F27508278003 | ADAPTER ADAPTER SET -0 OPTICAL ALIGNMENT | 2 | |
| 98F27508278004 | ADPATER ADAPTER SET -0 OPTICAL ALIGNMENT | 2 | |
| 98S21305000000 | TOOL I/F ADC-VACUUM PUMP SET ADAPTERS | 1 | |
| 98S57003029000 | ADAPTER-LOAD RELIEF(COMPLETE SET) | 8 | |
| 99-791-511 | ADAPTER - ANTISKID TEST SET CABLE | 2 | |
| 9970-957-526 | "TOOL SET - LEAK TEST, ADAPTER TEST LUBRICATION UNIT" | 1 | |
| 9C1378 | ADAPTER SET - LIFT - AFT ENGINE | 1 | |
| 9C1393 | ADAPTER SET HYR-VSS & ACTUATOR | 1 | |
| 9C1393G01 | Set -Adapter, VSV/VBV | 2 | |
| 9C1455 | ADAPTER SET-LIFT AND TURN PROPULSOR, AFT | 1 | |
| 9C1457 | ADAPTER SET, INSTALL/REMOVE-TRIM BALANCE CLIP, STG 6 LPT | 1 | |
| A158068-501 | Kit - Bleed Air Tube (Adapters Set) | 5 | |
| A158068‐501 | Kit - Bleed Air Tube (Adapters Set) | 5 | |
| A27021-98 | ADAPTER EQPTI-CONTROL WHEEL SET | 13 | |
| A32075-1 | ADAPTER - SPIN UP, WHEEL SPEED TRANSDUCER, ANTI-SKID SYSTEM GAUGE SET | 14 | |
| A32075-10 | ADAPTER - SPIN UP, WHEEL SPEED TRANSDUCER, ANTI-SKID SYSTEM GAUGE SET | 22 | |
| A32078-1 | ADAPTER SET - RETAINING NUT, ACTUATOR SIDE AND DRAG BRACE, MAIN LANDING GEAR (MLG) | 1 | |
| A32120-1 | TORQUE ADAPTER SET - ACTUATOR COMPONENTS, MAIN LANDING GEAR (MLG) | 1 | |
| A342 | TORQUE SCREWDRIVER WITH TORQUE-SET ADAPTER | 1 | |
| AC10K-HEADSETADPTR | AC10K-HEADSETADPTR;Headset Adapter | 1 | |
| ACK-2 | GREASE GUN ADAPTER SET (PN : MACNAUGHT ACK-2) | 18 | |
| AD953-7 | SET - PITOT-STATIC PROBE ADAPTER | 15 | |
| AD953HT-7 | SET - PITOT-STATIC PROBE ADAPTER | 1 | |
| AGE-01524-401 | TUBEADAPTER, SET-TESTPRESSURIZATIONBOOTH | 2 | |
| AGE-02430-401 | ADAPTERS SET, LEAK TEST-FUEL LINE/TANK | 1 | |
| AGE-02933-401 | ADAPTERS SET - LEAKAGE TEST, FIREX SYS | 1 | |
| AGE-03025-401 | SET- ADAPTERS, RIGGING FLAP | 1 | |
| AGE-03132-401 | ADAPTERS SET - TEST, PNEUMATIC SYSTEM | 1 | |
| AGE-03248-401 | SET-ADAPTERS, RIGGING FLAP | 4 | |
| AGE-03249-403 | SET-ADAPTERS LEFT HAND, RIGGING FLAP | 3 | |
| AGE-03249-404 | SET-ADAPTERS RIGHT HAND, RIGGING FLAP | 2 | |
| AGE-03390-401 | ADAPTERS SET - LEAKAGE TEST, FIREX SYS | 3 | |
| AGE-03889-401 | ADAPTERS SET, LEAKAGE TEST-BLEED/AIR CONDITIONING | 1 | |
| AGE-04363-401 | GSE 026 SET - JACKING ADAPTER | 9 | |
| AGE-04369-401 | ADAPTERS SET - TEST, PNEUMATIC SYSTEM | 3 | |
| AGE-04443-401 | ADAPTERS SET-TEST, TORQUE MOTOR SERVO LINES | 1 | |
| AGE-04718-401 | ADAPTER SET-MEAS, TAP BACKLASH | 4 | |
| AGE-04890-401 | Adapters - Set Jacking Aircraft | 2 | |
| AGE-05102-401 | SET - ADAPTERS/HARNESS, ADC CALI-BRATION | 1 | |
| AGE-05102-403 | SET - ADAPTERS/HARNESS, ADC CALI-BRATION | 3 | |
| AGE-05190-401 | SET - TEST ADAPTERS | 1 | |
| AGE-05190-403 | SET - TEST ADAPTERS | 1 | |
| AGE-05439-401 | ADAPTERS SET-LKG TEST, AUX FUEL SYS | 1 | |
| AGE03390-401 | ADAPTERS SET - LEAKAGE TEST,FIREX SYS EMB195 | 3 | |
| AK1-380PAX | SET-ADAPTER,SUPPLEMENTAL COOLING SYSTEM | 1 | |
| B32015 | HOISTING ADAPTER SET -0 MLG COMPONENTS | 1 | |
| B32015-38 | HOISTING ADAPTER SET - MAIN LANDING GEAR COMPONENTS | 8 | |
| B952 | FUEL QUANTITY ADAPTER SET 6150-00-408-3005 | 1 | |
| BAT-195-1 | Rivet Set Shank Adapter - Shank Opening: .498 Rivet Set to be Used: .401 | 1 | |
| BAT-195-2 | Rivet Set Shank Adapter - Shank Opening: .401 Rivet Set to be Used: .498 | 1 | |
| BT-S-550 | 24 Piece Adapter Jaw Set for BT-VS-500 | 2 | |
| C07002-1 | ADAPTER SET-WING JACKING | 30 | |
| C27017-1 | Adapter Set-Torque Wrench-TE Flaps | 3 | |
| C9393G01 | ADAPTER SET PRESSURE TEST/RIG - VIGV, VBV, VSV SPECIAL TOOL FOR PRESSURE TEST | 1 | |
| CB-45TO11-KIT1 | CB-45TO11-KIT1;Cable Set RJ 11 Patch W/Adapter | 1 | |
| CM-S-264 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool Set | 3 | |
| CM-S-264R | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool Set | 2 | |
| CM-S-288 | MIL-DTL-28840 Adapter Tool Set | 2 | |
| CM-S-288R | MIL-DTL-28840 Adapter Tool Set | 2 | |
| CM-S-389B | MIL-DTL-38999 Series IV Adapter Tool Set | 2 | |
| CM-S-389BR | MIL-DTL-38999 Series IV Adapter Tool Set | 2 | |
| CM-S-389L | MIL-DTL-38999 Series I Adapter Tool Set | 3 | |
| CM-S-389LR | MIL-DTL-38999 Series I Adapter Tool Set | 2 | |
| CM-S-389S | MIL-DTL-38999 Series II Adapter Tool Set | 3 | |
| CM-S-389SAB | MIL-DTL-38999 Series II Adapter Tool Set | 2 | |
| CM-S-389T | MIL-DTL-38999 Series III Adapter Tool Set | 4 | |
| CM-S-389TR | MIL-DTL-38999 Series III Adapter Tool Set | 2 | |
| CM-S-5015 | AS50151 and MIL-DTL-83723 Series II Adapter Tool Set | 2 | |
| CM-S-5015-SS | AS50151 and MIL-DTL-83723 Series II Adapter Tool Set | 2 | |
| CM-S-5015S | ADAPTER TOOL SET - ALUMINUM | 3 | |
| CM-S-815L | MIL-C-81511 Series I and III Adapter Tool Set | 2 | |
| CM-S-815R | MIL-C-81511 Series I, II, III, and IV Adapter Tool Set | 2 | |
| CM-S-815S | MIL-C-81511 Series II and IV Adapter Tool Set | 2 | |
| CM-S-837 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool Set | 3 | |
| CM-S-837RB | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool Set | 2 | |
| CM-S-837SS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool Set | 2 | |
| DRCADPH10-76/9100 | HEADSET ADAPTER WITHOUT PTT; MUST BE COMPATIBLE WITH H10-76 OR EQUAL HEADSET | 1 | |
| DRCADPH10-76/9100/U94 | DAVID CLARK HEADSET ADAPTER WITH PTT; MUST BE COMPATIBLE WITH H10-76 OR EQUAL HEADSET | 1 | |
| DZZ7026-501 | Adapter set-apu hoisting | 1 | |
| DZZ7062-1 | Adapter set-MLG trunnion bolt torque | 1 | |
| DZZ7062-501 | Adapter set-MLG trunnion bolt torque | 1 | |
| DZZ7062-501-312 | ADAPTER SET - MLG TRUNNION BOL | 1 | |
| DZZ7080-501 | Adapter Set - NLG Instl | 2 | |
| DZZ7137-1 | Adapter set-MLG trim cylinder overhaul | 1 | |
| DZZ7243-501 | Set-adapter，axle sleeve puller，NLG | 1 | |
| ETOR.101 | TORQUE SCREWDRIVER WITH TORQUE-SET ADAPTER | 2 | |
| ETOR.102 | TORQUE SCREWDRIVER WITH TORQUE-SET ADAPTER | 1 | |
| F70174 | THRESHOLD ADAPTER SET -0 CARGO LOADING PROVIDES | 1 | |
| F70291 | ADAPTER SET -0 TORQUE WRENCH USED TO TORQUE | 1 | |
| F70291-1 | Adapter set-torque wrench | 2 | |
| F70291-3 | ADAPTER SET-TORQUE WRENCH | 1 | |
| F71420 | TEST SET & ADAPTER ASSY -0 HF COMM SYS USED AS A | 1 | |
| F72731-114 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 502 | 3 | |
| F72731-115 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 503 | 3 | |
| F72731-116 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 500 | 2 | |
| F72731-117 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 504 | 2 | |
| F72731-118 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 505 | 4 | |
| F72731-119 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 506 | 2 | |
| F72731-120 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 507 | 1 | |
| F72731-121 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 508 | 1 | |
| F72731-130 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 509 | 8 | |
| F72731-81 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 501 | 7 | |
| F72731-82 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 510 | 5 | |
| F72867-1 | ADAPTER- CONTROL WHEEL SET | 23 | |
| F72883-10 | ADAPTER ASS'Y SET-LUBRFITTRACKROLLE | 4 | |
| F72925-15 | ADAPTER SET - PROTACTOR, FWD THRUST LEVER | 1 | |
| F72952-1 | Adapter Set - Protactor, Fwd Thrust Lever | 2 | |
| F72952-14 | Adapter Set - Protractor, FWD Thrust Lever | 9 | |
| F72952-14 -15 | Adapter Set -Protractor. Forward Thrust Lever | 1 | |
| F72952-15 | Adapter Set - Protractor FWD Thrust Lever | 23 | |
| F72952-3 | ADAPTER SET -0 PROTRACTOR, FWD THRUST LEVER USED | 1 | |
| F72977-62 | ADAPTER - SPIN UP, WHEEL SPEED TRANSDUCER, ANTI-SKID SYSTEM GAUGE SET | 16 | |
| F80091-1 | Threshold Adapter Set -Cargo Loading | 1 | |
| F80091-3 | Threshold Adapter Set -Cargo Loading | 1 | |
| FG-M6ADP | ADAPTER STANDARD SET FOR RGANGE 2-200 LB | 1 | |
| FST8168 | P-8 FUEL CONTROL ADAPTER SET / MFC: 50027 | 1 | |
| G32075-16 | ADAPTER - SPIN UP, WHEEL SPEED TRANSDUCER, ANTI-SKID SYSTEM GAUGE SET | 9 | |
| G5M5M0-116-0000 | SETTING TOOL - MICROSWITCH UNIT OR CABLE ADAPTER PLUG & OHMMETER (RANGE >1K OHM) | 1 | |
| GNSSRK | REPEATER KIT; INCLUDES GA30-V AMPLIFIER MODULE, S440 GNSS ANTENNA, N-JK-G ARRESTER, GRA10-NF INDOOR ANTENNA, LMR/KSR240 L=20MTR (NM-NM) INDOOR CABLE SET, RG8 L=30MTR (NM-TM) OUTDOOR CABLE SET, OUTDOOR ANTENNA MOUNTING STAND AND POWER ADAPTER MANUFACTURER: | 1 | |
| GSB2840002 | ADAPTER CABLE SET FOR D8-400 FUEL QUANTITY TEST | 1 | |
| GSB2840008A | ADAPTER CABLE SET FOR D8-400 FUEL QTY TEST | 1 | |
| GSB2840008B | SET - HARNESS ADAPTER Q100, 200, 300, METRIC, EXTENDED RANGE | 1 | |
| GSB2840008C | SET - HARNESS ADAPTER Q100, 200, 300, METRIC, STANDARD RANGE | 2 | |
| GSB2840008D | SET - HARNESS ADAPTER Q100, 200, 300, IMPERIAL, EXTENDED RANGE | 1 | |
| GSE 279 | ADAPTERS SET - TEST, PNEUMATIC SYSTEM | 1 | |
| HOA-6L | ADAPTER-OFFSET | 1 | |
| J21001-133 | HOIST ADAPTER EQUIPMENT SET - AIR COND PACK 777 | 6 | |
| J32055-01 | TORQUE ADAPTER SET -0 LANDING GEAR COMPONENTS | 1 | |
| J32055-03 | TORQUE ADAPTER SET -0 LANDING GEAR COMPONENTS | 1 | |
| J32055-1 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 5 | |
| J32055-3 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 6 | |
| J32055-50 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 9 | |
| J32055-61 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 7 | |
| J32055-81 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 4 | |
| J32055-82 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 2 | |
| J32055-97 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 1 | |
| JCIPSD737-1 | TOOL-FQIS TEST SET ADAPTER KIT | 1 | |
| K21016-129 | CTOP K-TOOLS(ADAPTER SET) | 10 | |
| K24014-1 | ADAPTER CABLE - BATTERY GSE MAIN/APU BATTERY ENCLOSURETEST SET - AUTO THROTTLE SWITCHPACK | 5 | |
| K27068-10 | MEASURING TOOL - ENCODER CALIBRATION ADAPTER SET | 7 | |
| LBOA-20-T6 | ADAPTER-OFFSET | 1 | |
| LBOA20 | ADAPTER-OFFSET | 2 | |
| M27456-2104D | ADAPTER - OFFSET, CRANK PAD | 1 | |
| MC-4A | Modular Extension Nosecap for offset adapter - Modular Cap/Jaw Attachment Plate | 1 | |
| MC-4B | Modular Extension Nosecap for offset adapter - Modular Cap/Jaw Attachment Plate | 1 | |
| MEN-44A-0401F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-0423F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-0601F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-0623F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-0801F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-0823F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-1001F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-1023F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-1201F | Modular Extension Nosecap for offset adapter - Modular Assy | 2 | |
| MEN-44A-1223F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44B-1401F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44B-1423F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44B-1601F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44B-1623F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-46B-1801F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-46B-1823F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MIT65B04017 | LUBE ADAPTER SET - FLAP LEADING EDGE TORQUE TUBE COUPLING | 4 | |
| MIT65B04308-1 | TORQUE ADAPTER SET - CARGO DOOR MECHANISM | 1 | |
| MIT69B82662 | SOCKET ADAPTER SET - SPOILER ACTUATOR BOLT | 5 | |
| MIT69B82662-17 | SET - SOCKET ADAPTER, SPOILER ACTUATOR BOLT, USED ON INBD SPOILERS 5 THRU 8 | 1 | |
| MJ-A4-0401F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-0423F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-0601F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-0623F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-0801F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-0823F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-1001F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-1023F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-1201F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-1223F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B4-1401F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B4-1423F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B4-1601F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B4-1623F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B6-1801F* | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B6-1823F* | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| PSD737-1 | TOOL-FQIS TEST SET ADAPTER KIT | 9 | |
| PWA106473 | ADAPTERS SET AFT - ENGINE TO TRANSPORT STAND | 1 | |
| PWA106492 | ADAPTER,OFFSET-BORESCOPE | 1 | |
| PWA107715 | ADAPTERS SET AFT - ENGINE TO TRANSPORT STAND | 1 | |
| PWC61322 | ADAPTER-LIFTINGIMP/SET | 1 | |
| PWC89878 | Pressure Set Adapter - Pratt & Whitney Canada | 2 | |
| RAR-USB-0805WQ01 | ARINC USB - ADAPTER SET | 1 | |
| RB T101623-7 | Adapter, Cradle Set-Support, Main Rotor Blade | 1 | |
| SH60B-612 | ADAPTER SET, PITOT-STATIC | 1 | |
| SPL-14867 | ADAPTER - OFFSET CRANK PAD | 1 | |
| SPL-2358 | SET ADAPTER - TORQUE HMU | 1 | |
| SPL2358 | SET ADAPTER - TORQUE HMU | 1 | |
| T103063 | TOOL SET-ADAPTER HOLDING,ENGINE | 1 | |
| WCI-1600HO | ADAPTER-OFFSET | 2 | |
| WCI-1700-ONE-0601-20F | MODULAR EXTENSION NOSECAP FOR OFFSET ADAPTER - MODULAR ASSY | 1 | |
| WCI-1700-ONE-0623-20F | MODULAR EXTENSION NOSECAP FOR OFFSET ADAPTER - MODULAR ASSY | 1 | |
| f 72952-2 | Adapter Set FWD - Thrust Lever | 6 | |
| f72952-2 | Adapter Set FWD - Thrust Lever | 6 | |
| lC6807 | BRACKET SET, ADAPTER-LPTR AFT SHAFT TO 2C600lG0l | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
