| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2C8072G02 | SEAL FIXTURE | 2 | |
| 6755010 | SEAL FIXTURE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 067-00-0431 | FLANGE SEALING SURFACE LOCATION FIXTURE | 1 | |
| 100-47823 | STATIONARY SEAL INSTALLATION FIXTURE | 1 | |
| 10C1218 | FIXTURE - PULLER - HP TURB AFT AIR SEAL | 1 | |
| 10C1218G01 | FIXTURE, PULLER - HPT AFT AIR SEAL (AFT AIR SEAL PULLER FIXTURE) | 1 | |
| 10C1218G02 | FIXTURE, PULLER - HPT AFT AIR SEAL (PULLER FIXTURE) (HIGHER REMOVAL FORCE FOR THE AFT AIR SEAL 2044M65P03) | 1 | |
| 10C2149 | OMNI SEAL INST FIXTURE | 1 | |
| 11-10830 | AIR SEALING FIXTURE | 1 | |
| 1106469 | PRESSURE SEAL INSTALLATION/ REMOVAL FIXTURE | 1 | |
| 1106569-2 | Pressure Seal Remover Fixture | 1 | |
| 114-227 | SEAL INSPECTION FIXTURE | 1 | |
| 114-432 | SEAL INSPECTION FIXTURE | 1 | |
| 114-441 | GREASE SEAL EXAMINATION FIXTURE | 5 | |
| 114-759-1 | SEAL INSPECTION FIXTURE 1 | 1 | |
| 114-759-2 | SEAL INSPECTION FIXTURE 2 | 1 | |
| 11C3006 | FIXTURE - INSTALL/REMOVE-HP TURB RTR INNER STG SEAL | 1 | |
| 11C3042 | FIXTURE - CHILL - INTERSTAGE SEAL | 1 | |
| 11C3063 | FIXTURE - CHIL-STATIONARY SEAL & IGV SHROUD | 1 | |
| 11C3063G01 | FIXTURE, CHILL - STATIONARY SEAL AND IGV SHROUD | 1 | |
| 11C3065 | FIXTURE - REMOVAL-HPTR AFT SEAL | 1 | |
| 11C3076 | FIXTURE - RMV/INST CMBSTR DIFFUSER NOZ STG 1 HPT NOZ SEAL | 1 | |
| 11C3147 | FIXTURE - RUN OUT-CDP SEAL/HPT ROTOR | 1 | |
| 11C3166 | FIXTURE, I/R - SEAL ROTATING, NO. 1 BRG | 1 | |
| 11C3354 | FIXTURE - INSTALL/REMOVE - HPT INTERSTAGE SEAL | 1 | |
| 11C3411 | FIXTURE - INSTALL-CARBON SEAL - NO. 1 BRG | 1 | |
| 11C3428 | FIXTURE - TEST-CARBON SEAL - NO. 1 BRG | 1 | |
| 11C3437 | FIXTURE, REMOVAL - SEAL, LPT AFT | 1 | |
| 11C3439 | FIXTURE - PROTECTOR/INSTALLATION-NOZZLE COVER - FWD OUTER SEAL | 1 | |
| 11C3440 | FIXTURE - PUSHER/PULL CARBON SEAL NO 1 BRG | 1 | |
| 11C3484 | FIXTURE - INSPECT/RESTRAIN HPTR AFT SEAL | 1 | |
| 11C3487 | FIXTURE - INSPECTION-SEAL - SUMP-HPT ROTOR | 1 | |
| 11C3499 | FIXTURE - INSPECT RESTRAIN-LPT FWD SEALS | 1 | |
| 11C3590 | FIXTURE - RUNOUT-LPT BRUSH SEAL (ENGLISH) (USA) | 1 | |
| 11C4206 | FIXTURE - RESTRAINING - HP TURBINE FORWARD OUTER SEAL | 1 | |
| 11C4215 | FIXTURE - RESTRAINING SEAL AIR/OIL ROT NO 4 BRG | 1 | |
| 11C4232 | FIXTURE - RESTRAINING-SEAL - STATIONARY INNER FWD NO 5 BEARING | 1 | |
| 11C4247 | FIXTURE - RESTRAINING RING MATING SEAL ROT NO 5 BRG | 1 | |
| 11C4249 | FIXTURE - START & RUN TCF SEAL RUNS (SOURCE CTRL-RHINESTAHL) | 1 | |
| 11C4292 | FIXTURE - INSTALLATION-EXPANSION - NO 5 BRG CARBON SEAL | 1 | |
| 11C4434 | FIXTURE, REMOVAL - SEAL, LPT AFT | 1 | |
| 11C4525 | FIXTURE - TORQUE-CDP SEAL JOINT | 1 | |
| 11C4562 | FIXTURE - INSTALLATION - INTERSTAGE SEAL - HPTR | 1 | |
| 11C4563 | FIXTURE - SEPARATION- INTERSTAGE SEAL / BLADE RETAINER HPTR | 1 | |
| 11C4623 | FIXTURE - CLAMP-STG 10 OGV SEALING RING | 1 | |
| 11C4658 | FIXTURE, I/R - HPT INTERSTAGE STAGE SEAL | 1 | |
| 11C4687 | FIXTURE, REMOVE - CDP SEAL AND STAGE 6-10 SP JOINT | 1 | |
| 11C4687G01 | FIXTURE, REMOVE - CDP SEAL AND STAGE 6-10 SP JOINT | 1 | |
| 11C4729 | FIXTURE, PRESS - SEAL | 1 | |
| 11C4888 | FIXTURE - TORQUE-CDP SEAL JOINT | 1 | |
| 18C1013 | FIXTURE, REMOVE - HPT AFT SEAL | 1 | |
| 18C1019 | FIXTURE, REMOVE - NO. 4 BRG. & SEALS | 1 | |
| 18C1062 | FIXTURE, REMOVE - M10 SEAL | 1 | |
| 1C6274 | FIXTURE SET, INSPECTION - LPT STATOR SEAL, STG. 2 | 1 | |
| 1C6274 REV B | FIXTURE SET, INSPECTION - LPT STATOR SEAL, STG. 2 | 1 | |
| 1C6279 | FIXTURE SET, INSP LPT STATOR SEAL STG 4 TF39 ENG | 1 | |
| 1C6279 REV B | FIXTURE SET, INSP. LPT STATOR SEAL, STAGE 4 TF39 ENG. | 1 | |
| 1C6280 | FIXTURE , INSP. LPT STATOR SEAL, STG. 3 | 1 | |
| 1C6280 REV C | FIXTURE , INSP. LPT STATOR SEAL, STG. 3 | 1 | |
| 1C6281 | FIXTURE, INSP. LPT STATOR SEAL, STG. 5 | 1 | |
| 1C6281 REV C | FIXTURE, INSP. LPT STATOR SEAL, STG. 5 | 1 | |
| 1C6282 | FIXTURE, INSP. LPT STATOR SEAL, STG. 6 | 1 | |
| 1C6282 REV B | FIXTURE, INSP. LPT STATOR SEAL, STG. 6 | 1 | |
| 1C6284 | FIXTURE SET, REPAIR - PT INTERSTAGE SEAL, STAGES 2-6 | 1 | |
| 1C8161 | FIXTURE, ASSY HP TURB. INTERSTAGE SEAL | 1 | |
| 1C8161 REV C | FIXTURE, ASSY HP TURB. INTERSTAGE SEAL | 1 | |
| 1C8182 | FIXTURE SET - REMOVAL MATING SEAL | 2 | |
| 1C8182 REV B | FIXTURE SET - REMOVAL MATING SEAL | 1 | |
| 1C8182G01 | Fixture set, Mating Seal Removal | 1 | |
| 1C9029G01 | FIXTURE, CONC -NO. 5 AND 7 BR.SEALS | 1 | |
| 1C9642 | FIXTURE - LIFT / INSTALL - SPACER SEAL AFT | 1 | |
| 1X56131407 | FIXTURE SEAL INSTALLATION | 1 | |
| 1X56131407/PHP | FIXTURE SEAL INSTALLATION 1X56131407EQUAL | 1 | |
| 2024067-1 | Seal Press Fixture | 1 | |
| 2024151-1 | SEAL PRESS FIXTURE | 1 | |
| 2024370-1 | Seal Press Fixture | 1 | |
| 2024649-1 | Seal Installer Fixture | 1 | |
| 2024821-1 | FIXTURE TEST, BEARING SEAL | 1 | |
| 2128M93 | THE CARBON SEAL REPLACEMENT FIXTURE | 1 | |
| 216564 | SHAFT SEAL ASSEMBLY FIXTURE | 1 | |
| 2024067 | Fixture-Press Seal And Shim | 1 | |
| 21C7237G01 | GRINDING FIXTURE, COMPRESSOR DISCHARGE ROTATING SEAL | 1 | |
| 21C7406P01 | FIXTURE, HOLDINGSEAL | 1 | |
| 2566442 | Seal Installation Fixture | 1 | |
| 291441-1 | FIXTURE LEAKAGE SEAL TEST | 1 | |
| 293323-1 | SEAL ALIGNMENT FIXTURE | 1 | |
| 294527-1 | FIXTURE SEAL, HOLDING | 1 | |
| 296165-2 | ALIGNMENT FIXTURE, SEAL | 1 | |
| 296447-1 | Fixture-Seal | 1 | |
| 2C 14094G06 | FIXTURE, SEAL CHECK NO. 4 BEARING AND SEAL | 1 | |
| 2C14094 | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094 REV Y | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094G05 | FIXTURE, SEATING CHECK ‐ NO. 4B BEARING AND SEAL | 1 | |
| 2C14094G06 | FIXTURE, SEATING #4 BEARING & SEAL | 1 | |
| 2C14124 | FIXTURE,SEAL-PRESSURIZE AGB | 1 | |
| 2C14124 REV D | FIXTURE, SEAL/PRESSURIZE ACCESS. GEARBOX | 1 | |
| 2C14124G02 | FIXTURE SEAL | 4 | |
| 2C14138 | FIXTURE, REMVL-MATING SEAL RINGS - ACCESS GEARBOX | 1 | |
| 2C14138 REV B | FIXTURE, REMOVAL-MATING SEAL RINGS - ACCESS. GEARBOX | 1 | |
| 2C14138G01 | FIXTURE REMOVAL MATING SEAL RING | 11 | |
| 2C14138G02 | FIXTURE REMOVAL MATING SEAL RINGS ACC GEARBOX CF6-80C2 | 12 | |
| 2C14174G02 | FIXTURE, CONCENTRICITY-NO.6 BRG. AND SEALS | 1 | |
| 2C14784 | FIXTURE, REMOVE-HPT ROTOR AFT OUTER AIR SEAL | 1 | |
| 2C14784G01 | FIXTURE, REMOVE - HPT ROTOR AFT OUTER AIR SEAL | 1 | |
| 2C14785 | FIXTURE, PULL-HPT ROTOR AFT AIR SEALS | 1 | |
| 2C14785 REV B | FIXTURE, PULL-HPT ROTOR AFT AIR SEALS | 1 | |
| 2C14785G01 | FIXTURE, PULL-HPTR AFT AIR SEALS | 2 | |
| 2C14785G02 | FIXTURE, PULL - HPT ROTOR AFT AIR SEALS | 1 | |
| 2C14785G05 | FIXTURE, PULL- HPTR AFT AIR SEALS ( PULL FIXTURES ) | 1 | |
| 2C14790 | FIXTURE, RUNOUT - NO. 3 BEARING/SEALS | 1 | |
| 2C14790 REV C | FIXTURE, RUNOUT - NO. 3 BEARING/SEALS | 1 | |
| 2C14790G01 | FIXTURE, RUNOUT - NO. 3 BEARING SEALS | 2 | |
| 2C14981G01 | FIXTURE, LIFT - ROTATING INTERSTAGE SEAL | 1 | |
| 2C18096G01 | FIXTURE, INSTL - ROTATING INNER SEAL RETAINER | 1 | |
| 2C18118 | FIXTURE, GAGE GO- STATIONARY AIR/OIL SEAL, NO 4 BRG | 1 | |
| 2C4094 | FIXTURE, SEATCHECK- NO 4B BEARING AND SEAL | 1 | |
| 2C5786G01 | FIXTURE - MACHINING SUMP SEALS | 1 | |
| 2C6145 | FIXTURE, CONCENTRICITY-FAN FRAME, NO. 3 BRG. SEALS | 1 | |
| 2C6145 REV H | FIXTURE, CONCENTRICITY-FAN FRAME, NO. 3 BRG. SEALS | 1 | |
| 2C6581 | FIXTURE, ASSEMBLY - CDP SEAL | 1 | |
| 2C658I | FIXTURE, ASSEMBLY - CDP SEAL | 1 | |
| 2C6998G05 | FIXTURE SET REMOVAL MATING SEAL RINGS-ACCESORY GEARBOX | 2 | |
| 2C6998G06 | FIXTURE SEAL REMOVAL | 3 | |
| 2C6I45 | FIXTURE, CONCENTRICITY-FAN FRAME, NO. 3 BRG. SEALS | 1 | |
| 2C7147G02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7147P02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7148G03 | Fixture, Holding, Nut, Seal, No. 4R Brg | 1 | |
| 2C7149G01 | Fixture, Holding, Air Vent Seal, No. 4R Brg | 1 | |
| 2C8040G01TK | FIXTURE CONCENTRICITY-NO.3 BRG. STATIONARY AIR &OIL SEALS | 1 | |
| 2C8072G02 | G/B DRIVE SHAFT SEAL FIXTURE | 2 | |
| 2C8072G03 | FIXTURE SEAL REMOVAL | 1 | |
| 2C91030G01 | FIXTURE - #6 SEAL | 1 | |
| 2C91122G01 | FIXTURE-MACHINING TURBINE SEAL | 1 | |
| 2C91123G01 | FIXTURE-MACHINING TURBINE SEAL | 1 | |
| 2C91124G01 | FIXTURE-MACHINING TURBINE SEAL | 1 | |
| 473015 | REPLACEMENT HOSES TOOL NO. 473015 THIS KIT CONTAINS ALL HYDRAULIC SEALS CAPABLE OF REBUILDING ONE HYDRAULIC JACK OF THE AA293268 CYLINDER HEAD/MAIN BEARING HYDRAULIC FIXTURE. | 1 | |
| 501353 | FIXTURE – 501 SERIES LLL VANE & SEAL SUPPORT STRESS RELIEVE | 1 | |
| 5035-0023W01 | LOWER CAM EXT SEALS ASSY FIXTURE | 1 | |
| 831630 | Fixture, Flush, No. 2 Bearing Seal Retainer | 1 | |
| 6796761 | Comp Stator Vane Corrugated Seal fixture | 1 | |
| 6796764 | Fixture Assy Corrugated seal | 2 | |
| 6799596 | FIXTURE -INSTALLATION, SPEED SENSITIVE CONTROL SEAL | 2 | |
| 6799630 | COMP. RTR LAYBRINTH STATOR SEAL CHECKING FIXTURE | 1 | |
| 6872288 | FIXTURE - INSTALLATION AND REMOVAL, STARTER SHAFT SEAL | 1 | |
| 6877003 | TURNING FIXTURE, SUPPORT MOUNTING FLANGE HOLDS FUEL NOZZLE FOR MACHINING OF MOUNTING FLANGE SEAL SURFACE. | 1 | |
| 6877021 | SEAL FIXTURE SECONDARY ORIFICE | 1 | |
| 6877025 | SEAL RING ADAPTER FIXTURE VALVE END | 1 | |
| 6877029 | LEAK TEST FIXTURE, CARTRIDGE VALVE HOLDS CARTRIDGE VALVE FOR CHECKING VALVE SEAL. | 1 | |
| 6897102 | PRIMARY SUPPORT RING FIXTURE LOCATES AND SEALS PRIMARY TO SUPPORT JOINT DURING PREWELD TESTING. | 1 | |
| 6897103 | HOLDING FIXTURE TIP SEAL | 1 | |
| 6897104 | SEAL FIXTURE PRIMARY ORIFICE | 1 | |
| 23051180 | FIXTURE, INST, PROP SHAFT SEAL | 3 | |
| 23055718 | Fixture – Flow Test, No. 7 Carbon Seal | 1 | |
| 23055719 | Fixture – Flow Test, No. 6 Carbon Seal | 1 | |
| 23055720 | Fixture – Flow Test, No. 5 Carbon Seal | 1 | |
| 23055721 | Fixture – Flow Test, No. 4 Carbon Seal | 1 | |
| 23055791 | Fixture – Flow Test, No. 0 Carbon Seal | 1 | |
| 23060655 | Fixture – Flow Test, No. 6 Carbon Seal | 1 | |
| 23060731 | Fixture – Grind, Center Sump Forward Labyrinth Seal | 1 | |
| 23060772 | Fixture – Grinding, Rear Stationary Seal | 1 | |
| 23060774 | Fixture – Grinding, Air Seal, Rear Center Sump | 1 | |
| 23063520 | Fixture – Holding, Rear Stationary Seal | 1 | |
| 23068488 | Fixture – Grinding, Air Seal, Rear Compressor | 1 | |
| 23068591 | Fixture – Flow Test No. 6 Carbon Seal | 1 | |
| 23068592 | Fixture – Flow Check No. 5 Carbon Seal | 1 | |
| 23068617 | Fixture – Flow Check No. 4 Carbon Seal | 1 | |
| 23076508 | Fixture – Flow Check No. 4 Carbon Seal | 1 | |
| 7C2021 | FIXTURE - RUN OUT- CDP SEAL/HP TURB ROTOR | 1 | |
| 7C2142G01 | FIXTURE, REMOVAL - SEAL LPT AFT INNER | 1 | |
| 81268100 | WELDING FIXTURE ASSY FOR HERMEIC SEAL DISC ASSEMBLIES | 4 | |
| 833110-12 | FIXTURE, SEAL PRESSING | 1 | |
| 833543-1 | FIXTURE ASSEMBLY SEAL PRESS | 1 | |
| 833544-1 | FIXTURE REMOVAL SEAL | 1 | |
| 833667-1 | FIXTURE INSTALLATION AND REMOVAL SEAL | 1 | |
| 833667-2 | Seal Installation&Removal fixture | 1 | |
| 834044-1 | FIXTURE SEAL REMOVAL | 1 | |
| 834332-1 | Seal Removal Fixture | 1 | |
| 834349-1 | Seal Assembly Fixture | 1 | |
| 834383-1 | Rotor Seal Installation Fixture | 1 | |
| 834443- | SEAL REMOVAL FIXTURE | 1 | |
| 834447-1 | SEAL REMOVAL FIXTURE | 1 | |
| 835224 -1 | SEAL REMOVAL FIXTURE | 1 | |
| 835224-1 | SEAL REMOVAL FIXTURE | 1 | |
| 835558-1 | SEAL REMOVA FIXTURE | 1 | |
| 835801-1 | Seal Press Fixture | 1 | |
| 856A 2377G01 | FIXTURE CENTERING & HANDELING ROTATIONAL SEAL | 1 | |
| 856A1061G03 | Fixture Lift/Turn Disk & Seal Fwd | 7 | |
| 856A1092P01 | FIXTURE, HOLDING - HPT AFT OUTER SEAL (HOLDING FIXTURE) | 1 | |
| 856A1099 | FIXTURE, INSTALLATION AND REMOVAL - HPT AFT OUTER AIR SEAL | 1 | |
| 856A1099 G01 | Fixture Install/Removal ‐ HPT Aft Outer Air Seal | 6 | |
| 856A1099G01 | FIXTURE INSTALL/REMOVAL HPT AFT OUTER AIR SEAL | 6 | |
| 856A1099P01 | FIXTURE, INSTALL/REMOVAL - HPT AFT OUTER AIR SEAL (INSTALL/REMOVAL FIXTURE) | 1 | |
| 856A1171 | FIXTURE, PRESS TEST NO 3 BRG AFT AIR/OIL SEAL | 1 | |
| 856A1171G03 | FIXTURE, PRESS TEST, #3 BRG AFT AIR/OIL SEAL | 1 | |
| 856A1171G05 | FIXTURE, PRESSURE TEST - SEAL, STATIONARY, NO. 3 BEARING AFT (PRESSURE TEST FIXTURE) | 1 | |
| 856A1171G06 | FIXTURE, PRESS TEST, #3 BRG AFT AIR/OIL SEAL | 2 | |
| 856A1281G02 | FIXTURE LIFT HPT FRONT OUTER SEAL | 5 | |
| 856A1295G02 | FIXTURE - ALIGNMENT - CDP SEAL BOLT EROSION SHIELD | 5 | |
| 856A1374 | FIXTURE, INSTALL/REMOVE - AIR SEAL IGB (FIXTURE) | 1 | |
| 856A1374G02 | FIXTURE, I/R - AIR SEAL, IGB | 2 | |
| 856A1451P01 | FIXTURE HOLDING SEAL | 1 | |
| 856A1478 | FIXTURE, REMOVAL NO. 3 BRG. AFT STATIONARY SEAL | 1 | |
| 856A1478 REV A | FIXTURE, REMOVAL NO. 3 BRG. AFT STATIONARY SEAL | 1 | |
| 856A1499G01 | Fixture Ins/Rem Air Seal | 1 | |
| 856A1603 | FIXTURE, I/R - HPTR FWD OUTER SEAL | 1 | |
| 856A1603G03 | FIXTURE, INSTALL/REMOVE - HPT ROTOR FWD OUTER SEAL | 3 | |
| 856A1603G05 | FIXTURE, I/R -HPTR FWD OUTER SEAL | 2 | |
| 856A1603G07 | FIXTURE, I/R -HPTR OUTER SEAL (CONFIG | 2 | |
| 856A1603G08 | FIXTURE, I/R -HPTR FWD OUTER SEAL | 3 | |
| 856A1621 | FIXTURE,LIFT I/R HPTR FWD SEAL | 1 | |
| 856A1621G01 | Fixture, Lift - Fixture Install/Remove, HP Turbine Rotor Forward Outer Seal (lift fixture) | 3 | |
| 856A1826 | FIXTURE, REMOVAL - NO. 3 BEARING AFT STATIONARY SEAL (REMOVAL FIXTURE) | 1 | |
| 856A1826G01 | Fixture, Install/Remove - No. 3 Stationary Air Seal (fixture) | 3 | |
| 856A1838G01 | FIXTURE, PULLER HPT FWD SHAFT (SEAL) | 4 | |
| 856A1845G01 | FIXTURE, ALIGNING- HIGH PRESSURE COMPRESSOR TO HOLD HP COMPRESSOR VANE SECTOR WHILE INSTALLING AND REMOVING SEALS | 3 | |
| 856A1868 | FIXTURE, INSTALL/REMOVE-HP TURB ROTOR FWD OUTER SEAL | 1 | |
| 856A1868G01 | Fixture Install/Remove - HPTR Forward Outer Seal | 4 | |
| 856A1868G02 | FIXTURE, INSTALL/REMOVE-HP TURB ROTOR FWD OUTER SEAL | 1 | |
| 856A1868G03 | FIXTURE, INSTALL/REMOVE-HP TURB ROTOR FWD OUTER SEAL | 3 | |
| 856A2377G01 | FIXTURE CENTERING & HANDELING ROTATIONAL SEAL | 1 | |
| 856A2409G02 | REMOVAL FIXTURE - LPT STG 1 OUTER STA AIR SEAL | 2 | |
| 856A2961G02 | INS/REM FIXTURE - AGB HANDCRANKING SEALOL | 8 | |
| 856A2961G03 | INS/REM FIXTURE - AGB HANDCRANKING SEALOL & MAGNETIC SEAL | 14 | |
| 856A3287G02 | HOLDING FIXTURE ROTATING AIR SEAL BOLT HEADS | 3 | |
| 856A3416 G01 | Fixture Disassembly ‐ Rotating Air Seal | 3 | |
| 856A3416G01 | FIXTURE DISASSEMBLY ‐ ROTATING AIR SEAL | 3 | |
| 856A3752 | FIXTURE, REMOVAL - STAGE 1-2-3 OUTER STATIONARY AIR SEAL (FIXTURE) | 1 | |
| 856A3752 G04 | Removal Fixture - Stage 1, 2 and 3 Outer Sta Air Seal | 8 | |
| 856A3752G02 | Fixture, Remove Stage 1-2-3 Outer Stat Air Seal | 1 | |
| 856A3752G04 | Fixture, Removal - Stage 1-2-3 Outer Stationary Air Seal (fixture) | 8 | |
| 856A4026G02 | FIXTURE MACHINING NO. 3 BEARING FORWARD STATIONARY OIL SEAL | 1 | |
| 856A4206 | FIXTURE, WELD/MACHINE - SEAL LIP, COMBUSTOR, AFT | 1 | |
| 856A4206G02 | FIXTURE, WELD/MACHINE – SEAL LIP, COMBUSTOR, AFT | 1 | |
| 856A5636G01 | EDM FIXTURE - LPT NOZZ STG 1 STAT AIR SEAL USE | 1 | |
| 856A5636G02 | EDM FIXTURE - LPT NOZZ STG 1 STAT AIR SEAL USE | 1 | |
| 856A5636G03 | EDM FIXTURE - LPT NOZZ STG 1 STAT AIR SEAL USE | 1 | |
| 856A5636G04 | EDM FIXTURE - LPT NOZZ STG 1 STAT AIR SEAL USE | 1 | |
| 856A5638G01 | EDM FIXTURE - LPT FWD ROTATING AIR SEAL | 1 | |
| 856A5638G02 | EDM FIXTURE - LPT FWD ROTATING AIR SEAL | 1 | |
| 856A5655G01 | FIXTURE CHECK TILT ANGLE STAGE 2 OUTER STATIONARY AIR SEAL | 2 | |
| 856A5656G01 | FIXTURE CHECK TILT ANGLE STAGE 3 OUTER STATIONARY AIR SEAL | 1 | |
| 8813535000 | SEALING FIXTURE | 1 | |
| 8813824000 | SEALING RING FIXTURE | 3 | |
| 8817958000 | SEALING FIXTURE | 1 | |
| 8C2060 | FIXTURE, CHILL - HPT AFT ROTATING SEAL | 1 | |
| 8C2067 | FIXTURE, INSTALLATION - #4 BEARING CARBON SEAL | 1 | |
| 8C2071 | FIXTURE, REMOVAL - CARBON SEAL, NO. 4 BEARING | 1 | |
| 8C2087 | FIXTURE, ALIGNMENT - ASPIRATING AIR SEAL | 1 | |
| 8C2123 | FIXTURE, REMOVAL-CDP SEAL | 1 | |
| 8C2137 | FIXTURE, DUMMY CDP SEAL | 1 | |
| 8C2511 | FIXTURE, PUSHER/PULLER CARBON SEAL NO. 1 BEARING | 1 | |
| 8C2514 | FIXTURE, TEST - CARBON SEAL - NO. 1 BEARING | 1 | |
| 8C2527 | FIXTURE, REMOVE – INTERSHAFT SEAL | 1 | |
| 8C2717 | FIXTURE - RMV/INST FWD OUTER SEAL - LITE (PRODUCTION TOOL) | 1 | |
| 8C2833 | FIXTURE - LIFT - HPTR MIDSEAL | 1 | |
| 8C3193 | FIXTURE - RESTRAINING - LPT STAGE 3 INTERSTAGE SEAL | 1 | |
| 8C3197 | FIXTURE - RESTRAINING - NO 5 BRG OUTERROTATING AIR SEAL | 1 | |
| 919266 | VACUUM SEAL FIXTURE | 1 | |
| 956A1031 | FIXTURE - RTNR-NO 4 BRG INNER RACE/OIL SCOOP/ROTATING SEAL/FWD SEAL | 1 | |
| 956A1037 | FIXTURE - RESTRAINING - FWD ROTATING OIL SEAL NO. 4 BEARING | 1 | |
| 956A1040 | FIXTURE - REMOVAL-AFT SEAL - HPT ROTOR | 1 | |
| 956A1042 | FIXTURE - SEPARATION - INTERSTAGE SEAL/BLADE RETAINER | 1 | |
| 956A1042G01 | Fixture,separation-interstage seal/blade retainer | 1 | |
| 956A1050 | FIXTURE REMOVE - NO. 4 SEAL RUNNER | 1 | |
| 956A1064 | FIXTURE - INSTALL - STATIONARY OIL SEAL - FWD | 1 | |
| 956A1065 | FIXTURE - INSTALL - CARBON SEAL - NO 4 | 1 | |
| 956A1098 | FIXTURE - LEAKAGE TEST-CARBON SEAL - N0 4. BEARING | 1 | |
| 956A1282 | FIXTURE - INSTALL/REMOVE- SHANK NUT - CDP STATOR SEAL | 1 | |
| 956A1351 | FIXTURE - REMOVE - HPT AFT STATIONARY SEAL | 1 | |
| 956A1502 | FIXTURE - TEST - NO. 3 CARBON SEAL | 1 | |
| 956A1503 | FIXTURE - GUIDE - NO. 3 CARBON SEAL | 1 | |
| 956A1727 | FIXTURE - INSTALLATION - HPT FWD OUTER SEAL | 1 | |
| 956A1736 | FIXTURE - INSTALLATION-HPT FWD OUTER SEAL | 1 | |
| 956A1804 | FIXTURE - RESTRAINING - SEAL - TRANSITION DUCT - TCF | 1 | |
| 956A1805 | FIXTURE - RESTRAIN - SEAL ROTATING - OIL | 1 | |
| 956A1805G02 | ROTATING OIL SEAL RESTRAIN FIXTURE | 1 | |
| 956A1807 | FIXTURE - RESTRAINING -MIDSEAL - HPTR | 1 | |
| 956A1807G02 | Fixture,restraining-midseal,hptr | 1 | |
| 956A1810 | FIXTURE - RESTRAINING - FWD OUTER SEAL - ROTATING | 1 | |
| 956A1811 | FIXTURE - RESTRAIN - AFT ROTATING AIR SEAL - HPTR | 1 | |
| 956A1816 | FIXTURE - INSTALL/REMOVE-HPT ROTOR - FWD SEAL | 1 | |
| 956A3006 | FIXTURE - INSTALL/ REMOVE-HPTR MIDSEAL | 1 | |
| 956A3022 | FIXTURE - INSTALL/REMOVE- HPT ROTOR - FWD SEAL | 1 | |
| 956A3031 | FIXTURE - RTNR-NO 4 BRG INNER RACE/OIL SCOOP/ROTATING SEAL/FWD SEAL | 1 | |
| 956A3041 | FIXTURE - CHILL-HPT ROTOR INTSTG SEAL/ STG 1 AFT RETAINER | 1 | |
| 956A3042 | FIXTURE - SEPARATION-HPTR MIDSEAL | 1 | |
| 956A3050 | FIXTURE - REMOVE - NO 4 CARBON SEAL RUNNER | 1 | |
| 956A3061 | FIXTURE - REMOVE - STATIONARY SEALS - B-SUMP | 1 | |
| 956A3079 | FIXTURE - REMOVAL - AFT SEAL - HPT ROTOR | 1 | |
| 956A3090 | FIXTURE - REMOVAL - STATIONARY SEAL - B SUMP | 1 | |
| 956A3093 | FIXTURE - LEAKAGE TEST - CARBON SEAL - NO. 4 BEARING | 1 | |
| 956A3094 | FIXTURE - INSTALL / REMOVE - CARBON SEAL. NO. 4 | 1 | |
| 956A3096 | FIXTURE - INSTALL - CARBON SEAL - NO 4 | 1 | |
| 956A3502 | FIXTURE - TEST - NO. 3 CARBON SEAL | 1 | |
| 956A3503 | FIXTURE - GUIDE - NO. 3 CARBON SEAL | 1 | |
| 956A3700 | FIXTURE - LIFT - MIDSEAL | 1 | |
| 956A3727 | FIXTURE - INSTALLATION - HPT FWD OUTER SEAL | 1 | |
| 956A3728 | FIXTURE - INSTALLATION - HPT STG1 RETAINER & MIDSEAL | 1 | |
| 956A3732 | FIXTURE - CHILL - HPT ROTOR AFT SEAL | 1 | |
| 956A3805 | FIXTURE - RESTRAIN - AFT ROTATING OIL SEAL - NO 4 BRG | 1 | |
| 956A3807 | FIXTURE - RESTRAINING -MIDSEAL - HPTR | 1 | |
| 956A6058 | FIXTURE - BACKLASH CHECK - ABRADABLE SEAL | 1 | |
| 956A6154 | FIXTURE - INSTALL REAR SEAL SUPPORT - VBV DOOR | 1 | |
| 956A6304 | FIXTURE, RESTRAIN-ROTATING SEAL BEARING 4 | 1 | |
| 956A6311 | FIXTURE - REMOVE - ROTATING SEAL BEARING 4 | 1 | |
| 956A6466 | FIXTURE - DISASSY-LPT SEAL RING STAGE 2-3 | 1 | |
| 956A6483 | FIXTURE - PUSHER - LPT RING -SEAL BEARING 5 | 1 | |
| 956A6489 | FIXTURE - PULLER - LPT RING -SEAL REAR ENCLOSURE | 1 | |
| 956A6490 | FIXTURE - REMOVE - LPT - RING SEAL | 1 | |
| 956A6491 | FIXTURE - PULLER - LPT RING -SEAL BEARING 5 | 1 | |
| 956A6575 | FIXTURE - RESTRAINER - SEALING RING | 1 | |
| 956A6604 | FIXTURE - HEATER - REAR SEAL NO.5 BEARING | 1 | |
| 956A6617 | FIXTURE, FLOW CHECK - CARBON SEAL NO.5 BEARING | 1 | |
| 956A6619 | FIXTURE - CENTERING - CARBON SEAL NO.5 BEARING | 1 | |
| 956A6812 | FIXTURE, CENTERING - FRONT ROTATING SEAL | 1 | |
| 956A6834 | FIXTURE ASSY/DIASSY - JOINT ROTATING SEAL | 1 | |
| 956A8151 | FIXTURE - INSTALL - SEAL | 1 | |
| 956A8157 | FIXTURE - ASSY - TORQUING - VBV DOOR & REAR SEAL | 1 | |
| 956A8320 | FIXTURE - REMOVE - RING SEAL | 1 | |
| 956A8402 | FIXTURE - INSTALL/REMOVE - RING - SEAL-REAR ENCLOSURE | 1 | |
| 956A8403 | FIXTURE - INSTALL/REMOVE - RING - SEAL | 1 | |
| 956A8432 | FIXTURE - DOG-CLUTCHING - RING - SEAL STG 2 | 1 | |
| 956A8501 | FIXTURE - RESTRAIN - SUPPORT - SEG RADIAL SEAL | 1 | |
| 956A8513 | FIXTURE - REMOVE - SUPPORT - SEG RADIAL SEAL | 1 | |
| 98A57004002000 | SEALING FIXTURE | 1 | |
| 98A57004002001 | FIXTURE - SEALING | 1 | |
| 995011 | SEALING STRAP AND SOLDE-RING FIXTURE | 1 | |
| 995063 | VACUUM SEAL FIXTURE; B/E AEROSPACE | 1 | |
| 9C1135 | FIXTURE, RUNOUT-CDP SEAL/HPTR | 1 | |
| 9C1422 | FIXTURE, RESTRAINING-HPT FORWARD OUTER SEAL | 1 | |
| 9C1425 | FIXTURE, RESTRAINING-FORWARD INNER SEAL | 1 | |
| 9C1433 | FIXTURE, RESTRAINING-LPT STAGE 3 INTERSTAGE SEAL | 1 | |
| 9C1434 | FIXTURE, RESTRAINING-LPT STAGE 4 INTERSTAGE SEAL | 1 | |
| 9C1436 | FIXTURE, RESTRAINING-SEAL, PLT ROTOR STGE 2 | 1 | |
| 9C1437 | FIXTURE, RESTRAINING-LPT FORWARD SEAL SUPPORT | 1 | |
| 9C1438 | FIXTURE, RESTRAINING-LPT STAGE 5 INTERSTAGE SEAL | 1 | |
| 9C1441 | FIXTURE, RESTRAINING-NO 5 BRG OUTER ROTATING AIR SEAL | 1 | |
| 9C2324 | FIXTURE R/I SEAL ROT #1 BRG. | 1 | |
| 9C3060 | FIXTURE, RESTRAINING-LPT STAGE 6 INTERSTAGE SEAL | 1 | |
| 9C3067 | SUPERSEDED BY G02FIXTURE, RESTRAINING-NO 3 BEARING, ROTATING SEAL | 1 | |
| 9C3070 | FIXTURE, RESTRAINING-HPT ROTOR FORWARD SEAL | 1 | |
| 9C3071 | FIXTURE, RESTRAINING-TRANSITION DUCT SEAL SUPPORT | 1 | |
| 9C3084 | FIXTURE, RESTRAINING-NO 5 BEARING SEAL HSG | 1 | |
| AGE70768 | CARBON SEAL ASSEMBLY FIXTURE | 1 | |
| C202-32-0711 | SEAL PRESS FIXTURE | 1 | |
| C27206 | FIXTURE,POSITIONING-TMF SEAL | 1 | |
| C27206G01 | FIXTURE,POSITIONING-TMF SEAL | 1 | |
| C32045-1 | FIXTURE SEAL CHANGE | 3 | |
| C32045-23 | Holding Fixture - Seal Change, Main Landing Gear | 5 | |
| C32045-63 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 4 | |
| C32063-1 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 1 | |
| GS13050-1 | FIXTURE, SEAL COMPRESSING | 1 | |
| GS13381 | FIXTURE SEAL COMPRESSI | 1 | |
| GS19468-1 | FIXTURE, SEAL COMPRESSION | 1 | |
| GS20023-1 | FIXTURE, CHEVRON SEAL | 1 | |
| HS7539 | FIXTURE-SEAL INSERTING | 2 | |
| IAE1J12812 | MOLDING FIXTURE IGV SEAL | 1 | |
| IAE2J12617 | FIXTURE - LPC IGV SEAL | 1 | |
| L-545 | FIXTURE SUPPORT HPC SPLIT STATOR CASE AND AIRSEAL SET BUILD AND TURN | 1 | |
| L-545149 | FIXTURE SUPPORT HPC SPLIT STATOR CASE AND AIRSEAL SET BUILD AND TURN | 1 | |
| LTCT7507-01 | Fixture, No. 2 Aft Seal Support | 1 | |
| PWA 107723 | FIXTURE, SUPPORT – HPT 1ST STAGE AIR SEAL | 1 | |
| PWA 12812 | Fixture Compr.rear bearing seal air pressure tube | 1 | |
| PWA 16197 | FIXTURE NO.6 BEARING SEAL HOUSING | 1 | |
| PWA107391 | INDEXING FIXTURE (INLET CONE SEAL) | 1 | |
| PWA26112 | FIXTURE, LEAK TEST - #1 BRG SEAL ASSY_[PWA26112] | 2 | |
| PWA26113 | FIXTURE - #1 SEAL SUPPORT PRESSURE TEST_[PWA26113] | 1 | |
| PWA26436 | FIXTURE - MOLD, AIRSEALING RING | 2 | |
| PWA27906 | FIXTURE - NO.3 BRG FRT AIRSEAL RETNG NUT_[PWA27906] | 2 | |
| PWA27988 | FIXTURE - SEAL ASSY - NO.3 BRG, FRONT_[PWA27988] | 1 | |
| PWA27989 | FIXTURE, SEAL & HOLDER - #3 BRG REAR_[PWA27989] | 1 | |
| PWA29647 | FIXTURE - SEAL ASSEMBLY, N1 & 2 BEARING_[PWA29647] | 2 | |
| PWA75913 | FIXTURE - HOLDG NO4 BEARING SEAL SPACER_REPLACESPWA27491BYT.B87-067_[PWA75913] | 1 | |
| PWC38101 | FIXTURE, HOLDING, LOW PRESSURE VANE RING SEAL MACHINING | 2 | |
| PWC62294 | FIXTURE-BRUSH SEAL | 1 | |
| PWC62865 | Fixture Assy/Disassy Seal | 1 | |
| PWC67184 | Fixture Brush Seal Front | 1 | |
| RB6893737 | FIXTURE SELECTOR, REAR COMPRESSOR SEAL VENT ORIFICE | 2 | |
| RBE1X56-131-407 | Tool, Fixture, Seal Installation | 2 | |
| SWE84036 | FIXTURE DOME SEAL REPLACEMENT | 1 | |
| TES-3771 | SHAFT SEAL REMOVING FIXTURE | 1 | |
| TES-3772 | SHAFT SEAL INSTALLING FIXTURE | 1 | |
| TES-3774 | Fixture,Shaft Seal | 1 | |
| TES-3774PM | FIXTURE,SHAFT SEAL | 1 | |
| U0008 | Sealing Fixture Cockpit Sliding Windows | 1 | |
| WT-01962 | FIXTURE, VENT SEALING | 1 | |
| Z0107-944 | TEST FIXTURE FOR SEALING TEST | 1 | |
| lC6274 | FIXTURE SET, INSPECTION - LPT STATOR SEAL, STG. 2 | 1 | |
| lC6279 | FIXTURE SET, INSP. LPT STATOR SEAL, STAGE 4 TF39 ENG. | 1 | |
| lC6280 | FIXTURE , INSP. LPT STATOR SEAL, STG. 3 | 1 | |
| lC6282 | FIXTURE, INSP. LPT STATOR SEAL, STG. 6 | 1 | |
| lC628l | FIXTURE, INSP. LPT STATOR SEAL, STG. 5 | 1 | |
| C067-00-0431 | FLANGE SEALING SURFACE LOCATION FIXTURE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
