| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0356720170 | SCREW JACK | 1 | |
| 535700036 | SCREW JACK | 1 | |
| 856A1130P11 | SCREW JACK | 5 | |
| CHA1238-002C | SCREW JACK | 1 | |
| DZZ0010-503 | SCREW JACK | 1 | |
| GSE2720435 | SCREW JACK | 1 | |
| HU41649 | SCREW JACK | 1 | |
| WMP-1-30P5836000-501 | SCREW JACK | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 856A1130 | TOOL SET - JACK SCREW | 4 | |
| (CALIB) 98L55109007000 | WRENCH-GROOVE NUT, THS SCREW JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27050-32 | Handling EQPT - R/I Stab Jackscrew (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F80014-16 | HOIST ADAPTER STABILIZER JACKSCREW (CALIBRATION) | 1 | |
| (CALIB) F80014-2 | BAR STABILIZER JACK SCREW (CALIBRATION) | 1 | |
| (CALIB) PWC32396 | JACKSCREW | 1 | |
| (CALIB)C27050-82 | HANDLING EQUIPMENT - REMOVAL/INSTALLATION, STABILIZER JACKSCREW (CALIBRATION) | 1 | |
| 0U142112 | ASS SCREW JACK KIT | 1 | |
| 10-24-36 | JACK - TRIPOD, 10 TON, 24 IN. CLOSED HEIGHT, 36 IN. LIFT, 4 IN. SCREW EXTENSION, 64 IN. EXTENDED HEIGHT. | 1 | |
| 10-24-36(2) | JACK - TRIPOD, 10 TON, 24 IN. CLOSED HEIGHT, 36 IN. LIFT, 4 IN. SCREW EXTENSION, 64 IN. EXTENDED HEIGHT. | 1 | |
| 1008-50 | JACK - AXLE, NLG - 10 TON CAPACITY - 8" MINIMUM HT., 13" LIFT, 4" SCREW EXTENSION, 25 TOTAL HT | 1 | |
| 10C1036G01 | TOOL SET, JACKSCREWS (TOOL SET) | 1 | |
| 10C3109G01 | JACKSCREW | 1 | |
| 11-54371-1 | KIT FLAP JACK SCREW | 1 | |
| 11C3389 | JACK SCREWS - DIASSEMBLE-STG 5-10 HPC STTR INR RINGS | 1 | |
| 11C3389G01 | JACK SCREWS, DISASSEMBLE - STAGE 5-10 HPC STTR INR RINGS | 1 | |
| 140052 | GEARBOX JACKSCREW SET | 1 | |
| 15-54-40 | JACK - TRIPOD, 15 TON, 54 IN. CLOSED HEIGHT, 40 IN. LIFT, 12 IN. SCREW EXTENSION, 106 EXTENDED HEIGHT. | 3 | |
| 190E2G0004 | JACKSCREW ASSY -HORIZONTAL STABILIZ-ER | 2 | |
| 1C6804 | TOOL SET, JACK SCREW-DISASSEMBLE FLANGES | 1 | |
| 1C6804G01 | TOOL SET,JACKSCREW | 1 | |
| 1C6804G04 | Set, Jackscrew | 1 | |
| 1C8039P02 | JACK SCREW HAND | 1 | |
| 1C8039P03 | JACK SCREW HAND | 1 | |
| 1C8039P04 | JACK SCREW HAND | 1 | |
| 1C9013G01 | JACKSCREWS | 1 | |
| 1C9150 | TOOL SET, JACK SCREWS-ENGINE BEARINGS & SEALS | 1 | |
| 1C9150G02 | Tool Set, Jackscrew | 1 | |
| 1SF2476-27-43KN | HORIZONTAL STAB. JACKSCREW PIN | 1 | |
| 1SF4347-72-00R | JACKSCREW | 1 | |
| 244689 | CAPSCREW, JACK OFF FRONT SUPPORT RING FROM FAN DISC | 4 | |
| 244689-2 | CAPSCREW, JACK OFF SUPPORT RING FROM FAN DISC | 5 | |
| 298487 | Screw, Jack Assembly | 1 | |
| 2AJ65B80552 | ASSEMBLY JIG SHAFT - DIFFERENTIAL, STABILIZER JACKSCREW | 1 | |
| 2C6164 | TOOL SET - JACKSCREW | 1 | |
| 2C6164G01 | SET JACK SCREW | 6 | |
| 2C6164P04. | JACKSCREW (6164G01'İN PARÇASI) | 1 | |
| 2MIT65B81117-1 | B747 TE FLAP JACK SCREW SUPPORT EQUIPMNET | 9 | |
| 32396 | JACKSCREWS P&WC | 1 | |
| 330A91-0181-01 | JACK SCREW HAND | 1 | |
| 3400844-3 | JACK SCREW | 1 | |
| 3403149-1 | FLAP JACKSCREW BALL NUT INSPECTION TOOL | 2 | |
| 365A91-2141-01 | JACKING: BALL ASSY, SCREW ON AIRFRAME FRONT [AS365 - EC155] | 1 | |
| 3C3238P07 | JACK SCREW | 1 | |
| 3CF65B80552 | CHECK FIXTURE - STABILIZER JACKSCREW DIFFERENTIAL ASSEMBLY, BACKLASH | 1 | |
| 3G6005G00431 | JACKSCREWS KIT | 1 | |
| 3G6305G01331 | JACKSCREWS KIT | 1 | |
| 3MIT65B80713 | MISCELLANEOUS TOOL AIR MOTOR - STABILIZER JACKSCREW ADAPTER | 3 | |
| 3SF5384-1 | FLAP JACKSCREW GIMBAL OILER | 1 | |
| 4621 | JACKSCREW HOIST | 1 | |
| 50-60-44 | JACK - TRIPOD - WING - 50 TON CAPACITY - 60" MINIMUM HT., 44" HYDRAULIC LIFT, 16" SCREW EXTENSION, 120" TOTAL HT. | 4 | |
| 532740157-1 | ADAPTER JACKSCREW | 1 | |
| 532740157-2 | ADAPTER JACKSCREW | 1 | |
| 53D22004 | JACK - AXLE, NLG - 10 TON CAPACITY - 8" MINIMUM HT., 13" LIFT, 4" SCREW EXTENSION, 25 TOTAL HT | 2 | |
| 55771S0000 | BACKLASH CHECKING TOOL - SLAT SCREWJACKS | 1 | |
| 558-1-05903-6 | SCREW-JACKING | 1 | |
| 65P10 | JACK - AXLE, 65 TON CAPACITY, 10.19 CLOSED HEIGHT, 11.0LIFT, 4.75 SCREW EXTENSION, 25.94 INCH EXTENDED HEIGHT | 5 | |
| 6F6000F00132 | JACKSCREW KIT | 1 | |
| 6F6000G00132 | JACK SCREW KIT | 1 | |
| 7011 | BARREL, Stab. Jack Screw Pin Tool | 8 | |
| 714ALEGEXT | JACK - TRIPOD - AFT BODY - 12 TON CAPACITY - 96-150 INCHES WITH 36 INCH LEG EXTENSION KIT - 44 INCH HYDRAULIC LIFT - 10 INCH SCREW EXTENSION | 1 | |
| 718A | JACK - TRIPOD - FORWARD FUSELAGE - 20 TON CAPACITY - HEIGHT 54-104 INCHES - 40 INCH HYDRAULIC LIFT - 10 INCH SCREW EXTENSION - HEIGHT 72-122 INCHES WITH 18 INCH LEG EXTENSION KIT - HEIGHT 90-140 INCHES WITH 36 INCH LEG EXTENSION KIT | 3 | |
| 718B | JACK - TRIPOD - FORWARD FUSELAGE - 20 TON CAPACITY - HEIGHT 54-104 INCHES - 40 INCH HYDRAULIC LIFT - 10 INCH SCREW EXTENSION - HEIGHT 72-122 INCHES WITH 18 INCH LEG EXTENSION KIT - HEIGHT 90-140 INCHES WITH 36 INCH LEG EXTENSION KIT | 2 | |
| 718B/71800B | JACK - TRIPOD - FORWARD FUSELAGE - 20 TON CAPACITY - HEIGHT 54-104 INCHES - 40 INCH HYDRAULIC LIFT - 10 INCH SCREW EXTENSION - HEIGHT 72-122 INCHES WITH 18 INCH LEG EXTENSION KIT - HEIGHT 90-140 INCHES WITH 36 INCH LEG EXTENSION KIT | 1 | |
| 7200TC16102-501 | Jacking Screw Set/GENX Engine | 1 | |
| 7825222 | JACKSCREW | 1 | |
| 460007060 | SCREWJACK ASSEMBLY | 1 | |
| 4600067060 | SCREW JACK ASSEMBLY | 1 | |
| 795D1100 | JACK - TRIPOD - AFT FUSELAGE - 15 TON CAPACITY - 44" MINIMUM HT., 54" HYDRAULIC LIFT, 13" SCREW EXTENSION, 111" TOTAL HT. | 1 | |
| 7MIT65B03670 | 747SP HORIZONTAL STABILIZER JACKSCREW SUPPORT | 1 | |
| 856A-1130-G01 | Tool Set, 53 Jack Screws | 9 | |
| 856A-1130-G02 | Tool Set, 4 Jack Screws | 6 | |
| 856A-1130-G03 | Tool Set, 21 Jack Screws | 1 | |
| 856A-1130-G07 | Tool Set, 31 Jack Screws | 8 | |
| 856A-1130-G08 | Tool Set, 28 Jack Screws | 6 | |
| 856A-1130-G09 | Tool Set, 42 Jack Screws | 12 | |
| 856A-1130-P05 | Jack Screw | 2 | |
| 856A-1130-P08 | Jack Screw | 9 | |
| 856A-1130-P10 | Jack Screw | 2 | |
| 856A-1130-P11 | Jack Screw | 5 | |
| 856A1130 | TOOL SET - JACK SCREW | 4 | |
| 856A1130 G10 | TOOL SET-JACKSCREWS | 25 | |
| 856A1130 GO9 | TOOL SET- JACK SCREW | 12 | |
| 856A1130 REV M | TOOL SET-JACK SCREW | 1 | |
| 856A1130/ALT: 856A1130G01 | TOOL SET-JACK SCREW | 1 | |
| 856A1130G01 | TOOL SET- JACK SCREW;SEE M1 | 9 | |
| 856A1130G010 | TOOL SET - JACK SCREW | 2 | |
| 856A1130G011 | TOOL SET - JACK SCREW | 1 | |
| 856A1130G02 | TOOL SET-JACK SCREW | 6 | |
| 856A1130G03 | TOOL SET - JACK SCREWS | 1 | |
| 856A1130G04 | TOOL SET - JACK SCREWS | 1 | |
| 856A1130G05 | TOOL SET - JACK SCREWS | 1 | |
| 856A1130G06 | JACKSCREW TOOL SET | 8 | |
| 856A1130G07 | TOOL SET JACKS SCREWS | 8 | |
| 856A1130G08 | TOOL SET - JACK SCREWS | 6 | |
| 856A1130G08 | TOOL SET JACKSCREW | 6 | |
| 856A1130G09 | TOOL SET - JACKSCREW | 12 | |
| 856A1130G09 | TOOL SET JACKSCREW | 12 | |
| 856A1130G10 | TOOL SET JACK SCREWS | 25 | |
| 856A1130G12 | Tool Set Jack Screw | 1 | |
| 856A1130G6 | TOOL SET - JACK SCREW | 1 | |
| 856A1130GO9 | TOOL SET- JACK SCREW | 12 | |
| 856A1130P05 | JACKSCREW .250 DIAMETER | 2 | |
| 856A1130P08 | JACKSCREW | 9 | |
| 856A1130P09 | SCREW, JACK | 1 | |
| 856A1130P10 | JACKSCREW 312-24UNF | 2 | |
| 856A1130P11 | SCREW, JACK | 5 | |
| 856A1130P12 | JACK SCREW | 10 | |
| 856A1130P13 | JACKSCREW - 190 DIAMETER | 2 | |
| 856A1130P19 | JACK SCREW | 1 | |
| 856A1130P8 | JACK SCREW | 1 | |
| 856A1130 | TOOL SET - JACK SCREW | 4 | |
| 856A1196G02 | TOOL SET JACKSCREWS | 4 | |
| 856A1839G01 | FIXTURE, DISASSY-HPTR/HPCR (JACKSCREW) | 8 | |
| 856A2601G01 | Kit Jackscrew | 1 | |
| 856A3576G02 | SET - TOOL, JACKSCREW, ENGINE DISASSEMBLY | 17 | |
| 856AA1130G10 | JACK SCREWS | 1 | |
| 856AII30 | TOOL SET-JACK SCREW | 1 | |
| 856AII30 GO9 | TOOL SET- JACK SCREW | 1 | |
| 856AII30G0I | TOOL SET- JACK SCREW;SEE MI | 1 | |
| 856S1130P11 | ENGINE REPAIR JACKSCREW | 1 | |
| 8842 | JACK - AXLE, 45 TON CAPACITY, 7.0" CLOSED HEIGHT, 12.03" LIFT, 2.84" SCREW EXTENSION, 21.88" INCH EXTENDED HEIGHT, 7.0" (MALABAR INTERNATIONAL) | 4 | |
| 8C2741 | JACK SCREWS, SEPERATION SET | 1 | |
| 8G6000G00231 | JACK SCREW KIT | 1 | |
| 9429M50 | SET-JACKSCREWS | 1 | |
| 9429M50G02 | SET - JACK SCREW | 2 | |
| 9429M50G04 | JACK SCREW SET | 3 | |
| 9441M55 | JACKSCREW-TRANSFER GEARBOX | 1 | |
| 9441M55 REV B | JACKSCREW-TRANSFER GEARBOX | 1 | |
| 9441M56 | JACKSCREW-TRANSFER GEARBOX | 1 | |
| 9441M56 REV C | JACKSCREW-TRANSFER GEARBOX | 1 | |
| 9471M48P01 | TOOL SET - JACKSCREW | 5 | |
| 9480M58G02 | JACKSCREW | 1 | |
| 956A1243 | TOOL SET - JACK SCREWS | 1 | |
| 956A1609 | TOOL SET - JACK SCREW | 1 | |
| 956A1609G01 | JACKSCREWS, TOOL SET | 5 | |
| 956A3243 | TOOL SET - JACK SCREWS | 1 | |
| 956A3506 | SET - GUIDE PINS / JACK SCREWS - PMA INSTALL/REMOVE | 1 | |
| 956A3506G01 | SET, GUIDE PINS JACK SCREWS | 8 | |
| 956A6002 | TOOL KIT - JACK SCREWS - FAN | 1 | |
| 956A6880P03 | JACKSCREW | 2 | |
| 98807000005000 | JACK PNT PLUG SCREW DRIVER | 1 | |
| 98A12001029000 | LUBE ADP SCREW JACK TOOL RL S13B2 | 3 | |
| 98A27104018000 | CLAMP-AILERON TRIM SCREW JACK | 2 | |
| 98A27203250003 | SCREW-JACK ASSY | 1 | |
| 98A27203501001 | SCREW-JACK ASSY | 1 | |
| 98A27501501000 | SLEEVE-LOCKING,FLAP SCREW JACK NO.1 HEAD ATTACHMENT | 4 | |
| 98A27504011000 | EXTRACTOR-GIMBOL SPIGOT-SCREW JACK TO FLAP CARRIAGE | 9 | |
| 98A27508022000 | MEASURING DEVICE-OVERTRAVEL FLAP, SCREW JACKS 1 THRU 4 | 3 | |
| 98A27508051000 | SETTING DEVICE SET-SUPPORTING SPRING,FLAP SCREW JACK 1 | 1 | |
| 98A27803000000 | WRENCH-SLAT SCREWJACK UNLOCKING | 5 | |
| 98A32301010000 | BACKLASH CHECKING TOOL - FLAP SCREWJACK 2 | 9 | |
| 98A32301011000 | BACKLASH CHECKING TOOL - FLAP SCREWJACKS 1,3 AND 4 | 5 | |
| 98A54003023100 | JACKSCREW | 1 | |
| 98A54003023101 | JACK SCREW | 1 | |
| 98A54003023102 | JACK SCREW | 1 | |
| 98A54003036000 | JACK SCREW | 1 | |
| 98A54003036100 | JACK SCREW | 1 | |
| 98D27203000043 | SCREW JACK ASSY | 1 | |
| 98F55109012000 | WRENCH - GROOVE NUT, THS SCREW JACK | 8 | |
| 98L55109007000 | WRENCH-GROOVE NUT, THS SCREW JACK | 1 | |
| 98S 070 0 0005 000 | JACK PNT PLUG SCREW DRIVER | 14 | |
| 98S07000000500 | JACK POINT PLUG SCREW DRIVER (ATR) | 1 | |
| 98S07000005000 | Jack Pnt Plug Screw Driver | 14 | |
| 98S07000005000-REVB0 | JACK PNT PLUG SCREW DRIVER | 1 | |
| 9C2351 | JACK SCREW | 1 | |
| 9C2351G01 | JACKSCREW - EXTRACTION SCREW SET | 1 | |
| 9C2351G02 | JACKSCREW - EXTRACTION SCREW SET | 1 | |
| A0054 | Screwdriver Jacking Point Plug | 1 | |
| A0083 | Clamp Screw Jack Large Cargo Door | 1 | |
| AB72001-N3V | TOOL SET - JACK SCREW | 1 | |
| AID-00704 | JACKING SCREW | 1 | |
| AJ65B80552 | ASSEMBLY JIG - DIFFERENTIAL ASSEMBLY, STABILIZER JACKSCREW | 1 | |
| AN509-416R15 | WING JACK SCREW | 2 | |
| B27001-1 | REMOVAL AND INSTALLATION EQUIPMENT HORIZONTAL STABILISER JACKSCREW | 8 | |
| B27001-79 | REMOVAL AND INSTALLATION EQUIPMENT HORIZONTAL STABILISER JACKSCREW | 1 | |
| B27011 | INTL/REM EQUIPMENT - HORIZ. STAB. JACKSCREW | 1 | |
| B27011 REV E | INTL/REM EQUIPMENT - HORIZ. STAB. JACKSCREW | 1 | |
| B27011-28 | HORIZ STAB JACKSCREW TOOL | 1 | |
| B27011-4 | HORIZ. STAB. JACKSCREW INST/REM | 6 | |
| B27011-62 | FRAME ASSEMBLY - FOR EQUIP HANDLING JACKSCREW | 4 | |
| B27011-69 | R&I Equip Horiz Stab Jackscrew | 3 | |
| B27011-71 | TRUNNION ASSEMBLY - HORIZ. STAB. JACKSCREW INST/REM | 6 | |
| B27011-77 | HORIZ. STAB. JACKSCREW INST/REM | 5 | |
| B27011-79 | INSTALLATION/REMOVAL EQUIPMENT - HORIZONTAL STABILIZER JACKSCREW | 18 | |
| B27034 | CHKNG EQUP - JACK SCREW: BACK LASH HZTL STBLZR | 1 | |
| B27034 REV NC | CHKNG EQUP - JACK SCREW: BACK LASH HZTL STBLZR | 1 | |
| B27034-1 | CHECKING EQUIPMENT - JACKSCREW BACKLASH, HORIZONTAL STABILIZER | 11 | |
| B27034-1-M | CHECKING EQPT-JACKSCREW | 1 | |
| B27034-6 | LOAD ASSEMBLY-JACKSCREW BACKLASH,HORIZ .STABILIZER INCUDED IN B27034-1 | 6 | |
| B55002-11 | Jack Screw | 1 | |
| BS4168 | SCREW M5X12 JACKING | 1 | |
| BW307 | Starrett S190 JACK SCREW SET | 1 | |
| BW322 | Starrett SF190 JACK SCREW SET | 1 | |
| BW442 | Starrett S191 JACK SCREW SET | 1 | |
| C12004-6 | SPRING LUBE JACKSCREW FLAP | 17 | |
| C12005-5 | FLAP LUB TOOL, BOEING JACKSCREW | 14 | |
| C12005-6 | DISP LUBE JACKSCREW | 7 | |
| C136408-2 | SCREWJACK | 1 | |
| C20750-82 | EQUIP.HANDLING,STABILIZER SCREW JACK | 1 | |
| C27011 | INSTL/REM EQUIPMENT-HORIZ. STAB,JACKSCREW | 1 | |
| C27050 | HANDLING EQUIPMENT REMjINSTL STAB JACKSCREW | 1 | |
| C27050-1 | EQUIP JACKSCREW H/S | 1 | |
| C27050-125 | Handling Equipment - Removal/Installation, Stabilizer Jackscrew | 8 | |
| C27050-32 | Equipment-Handling, StabilizerJackscrew ( Dome Pressure Bulkhead) | 8 | |
| C27050-36 | EQUIPMENT HANDLING R/I STABILIZER JACK SCREW | 1 | |
| C27050-82 | Handling Equipment - Removal/Installation, Stabilizer Jackscrew | 16 | |
| C27050-82 | JACKSCREW R/I EQ | 16 | |
| C27065-1 | Check Equipment - Jackscrew Backlash, Horizontal Stabilizer | 5 | |
| C27065-20 | Check Equipment - Jackscrew Backlash, Horizontal Stabilizer | 9 | |
| C27090-1 | Torque Socket - Upper Stop, Stabilizer Trim Jack Screw | 10 | |
| C270901 | TORQUE SOCKET - UPPER STOP, STABILIZER TRIM JACK SCREW | 10 | |
| C28008-1 | CHECK EQUIPMENT - JACKSCREW BACKLASH HORIZONTAL STABILIZER | 12 | |
| CE4-1219 | PULLER JACKSCREW | 1 | |
| CE4-1220 | PULLER JACKSCREW | 1 | |
| CE4-1249 | PULLER JACKSCREW | 1 | |
| CH713-125 | STEADY JACK SCREW BEARING | 1 | |
| CH723-435 | PIN LOCKING TRIMMABLE HORIZONT STABI SCREW JACK M CON | 1 | |
| CHA141377 | SCREW/JACKHEAD END FLOAT CHECKING ADAPTER | 4 | |
| CHA141478 | BACKLASH CHECKING TOOL - FLAP SCREWJACKS 1 THRU 6 | 4 | |
| CPWA-30226 | Jack Screws | 1 | |
| D01051 | JACK - TRIPOD, FORWARD BODY, 11 TON CAPACITY, 57.1 INCH CLOSED HEIGHT, 40.2 INCH HYDRAULIC LIFT, 10.0 INCH SCREW EXTENSION, 107.3 INCH EXTENDED HEIGHT. | 1 | |
| DRT68165 | JACK-SCREW, ASSEMBLY | 1 | |
| DRT68834 | SCREW JACK ASSY | 1 | |
| DZZ0010-1 | Screwjack-slat drum positioning ,outbd | 1 | |
| DZZ0010-503 | OUTBD SLAT DRIVE MECH JACK SCREW | 1 | |
| DZZ0018 | SCREWJACK | 1 | |
| DZZ0018-1 | INBD SLAT DRIVE MECH JACK SCREW | 1 | |
| DZZ7021-1 | HORZ STAB JACKSCREW | 4 | |
| ELA12986-1 | DIP EXTRACTOR JACKSCREW | 1 | |
| F7/252 JACKSCREW | JACKSCREW ADAPTER 727 | 1 | |
| F70057 | SUPPORT ASSY -0 STABILIZER JACK SCREW USED TO | 1 | |
| F70057-500 | Support assembly-stabilizer jack screw | 1 | |
| F70087 | SPANNER (HORZ STAB JACKSCREW) | 1 | |
| F72703-500 | STAB. SCREW JACK TOOL KIT | 4 | |
| F72908 | HOIST MOUNT ASSY -0 STABILIZER JACKSCREW USED AS | 1 | |
| F72908-1 | STABILIZER JACK SCREW HOIST | 3 | |
| F72908-3 | HOIST MOUNT ASS'Y STAB.JACKSCREW | 1 | |
| F72924-1 | Holder - Stabilizer Trim Jackscrew Ballnut and Screw Assembly | 9 | |
| F72937-1 | GAGE JACKSCREW XMISS | 3 | |
| F72937-2 | GAGE JACKSCREW XMISS | 1 | |
| F80014 | Handling Equ Satb Jackscrew | 1 | |
| F80014-1 | ADAPTOR HANDLING EQUIP,JACKSCREW, STABIL | 1 | |
| F80014-16 | HOIST ADAPTER-STAB JACKSCREW | 14 | |
| F80014-2 | STABILIZER JACKSCREW BAR | 13 | |
| F80014-2-M | STABILIZER JACKSCREW BAR | 1 | |
| FAS-B27011-85 | Horizontal Jackscrew Support Equip | 1 | |
| FJC01-35-24000 | SCREW JACK-TRESTLE,REARFUSELAGE AND AUTER WING | 1 | |
| GSB3411012 | JACKING SCREW − OIL PUMP (SERIES 400) | 1 | |
| GSE545 | JACKSCREW ASSY – HORIZONTAL STABILIZER | 1 | |
| HC130-H0064-000 | GAGS SCREW JACK | 3 | |
| HC130H0072-000 | Extractor - pin flap screw jack trunnion | 1 | |
| HC130H0108-000 | Clamp - locking flap screw jack | 3 | |
| HC130H0179-000 | Fixture - back lash checking, flap ball screw jack | 3 | |
| HU27579 | SPANNER - T/R ARREST SCREW JACK, RB211 | 1 | |
| IAE1P17043 | PULLER, JACKSCREW | 1 | |
| J1383P04 | JACKSCREW - EXTRACTION SCREW SET | 1 | |
| J32014-36 | Jack Screw Assembly | 1 | |
| J32014-92 | JACK SCREW | 1 | |
| J32082-4 | JACK SCREW ASSEMBLY | 1 | |
| J55004-3 | JACK SCREW ASSY | 1 | |
| J55004-77 | Jack Screw Assy | 1 | |
| K-3343 | TRONAIR JACK REPLACEMENT SCREW KIT | 3 | |
| K32011- 68 | JACK SCREW ASSY | 1 | |
| K32011-68 | Jack screw assy | 1 | |
| K32011-8 | Jack screw assy | 1 | |
| K55001-58 | JACK SCREW ASSY | 1 | |
| K55001-6 | JACK SCREW ASSY | 1 | |
| L-37764 | PULLER JACKSCREW HPC | 1 | |
| L-37765 | PULLER JACKSCREW HPC | 1 | |
| L27001-1 | HORIZ STAB JACK SCREW | 7 | |
| LLA537A204 | TOOL BACKLASH CHECKING - FLAP SCREWJACK 1, 3 AND 4 | 3 | |
| LLA547A108 | TOOL BACKLASH CHECKING - FLAP SCREWJACK 2 | 2 | |
| LST50680 | JACK SCREW | 1 | |
| LST64622 | Jackscrew - complete | 1 | |
| MIT65C37785-1-81 | JACK SCREW ASSY | 1 | |
| MS24694-S102 | WING JACK SCREW | 1 | |
| MTK | PUSHER JACKSCREW LPC | 1 | |
| NPN | PUSHER JACKSCREW LPC | 1 | |
| OTC25931A | JACK SCREW | 1 | |
| PS660S | HYDRAULIC JACK 60 TONNE, 150MM SCREWED RAM | 1 | |
| PWA 101848 | PULLER, JACKSCREW (6 NECESSARY) | 1 | |
| PWA 108554 | PULLER, JACKSCREW FAN, SPINNER | 2 | |
| PWA 108555 | PULLER,JACKSCREW-FAN SHAFT | 1 | |
| PWA 115019 | PMA ROTOR JACKSCREW PULLER | 1 | |
| PWA 211790 | PULLER, JACKSCREW | 3 | |
| PWA 80239 | PULLER, JACKSCREW | 1 | |
| PWA 80240 | PULLER, JACKSCREW | 1 | |
| PWA 81556 | RING, JACKSCREW | 1 | |
| PWA 85069 | PULLER, JACKSCREW | 1 | |
| PWA 85258A | PULLER JACKSCREW LPT | 1 | |
| PWA 85298 | PULLER, JACKSCREW | 1 | |
| PWA 85307 | PULLER, JACKSCREW | 9 | |
| PWA 85632 | PULLER, JACKSCREW | 1 | |
| PWA 85688 | PULLER, JACKSCREW | 9 | |
| PWA 86489 | PULLER, JACKSCREW | 1 | |
| PWA 86551 | PULLER, JACKSCREW | 1 | |
| PWA 86630 | JACKSCREW PULLER (2 ARE NECESSARY) − | 1 | |
| PWA101035 | PULLER-JACKSCREW ANGLE GEARBOX | 3 | |
| PWA101042 | PULLER JACKSCREW | 2 | |
| PWA101179 | PULLER JACKSCREW LPT | 1 | |
| PWA101833 | PUSHER JACKSCREW LPT | 1 | |
| PWA102301 | PULLER JACK SCREW | 1 | |
| PWA102346 | PULLER JACK SCREW | 1 | |
| PWA102388 | PULLER JACK SCREW | 1 | |
| PWA102396-1 | PULLER JACKSCREW HPC 3 PCS SET | 1 | |
| PWA102460 | PULLER JACKSCREW HPC 3 PCS SET | 1 | |
| PWA107285-1 | Puller, Jackscrew | 1 | |
| PWA107285-2 | Puller, Jackscrew | 1 | |
| PWA107285-3 | Puller, Jackscrew | 1 | |
| PWA107285-4 | Puller, Jackscrew | 1 | |
| PWA108554 | PULLER, JACKSCREW | 2 | |
| PWA108554C | PULLER JACK SCREW | 1 | |
| PWA108555 | PULLER, JACKSCREW | 1 | |
| PWA108555C | PULLER, JACKSCREW | 1 | |
| PWA111015 | PULLER JACKSCREW CONE | 1 | |
| PWA111606 | PULLER, JACKSCREW | 5 | |
| PWA111679 | PULLER, JACKSCREW | 3 | |
| PWA211778 | PULLER, JACKSCREW | 3 | |
| PWA211790 | Puller jack screw | 3 | |
| PWA27600 | PULLER-SCREWJACK SPLITTER ASSY | 4 | |
| PWA45211 | JACK SCREW | 1 | |
| PWA45543 | JACKSCREW | 1 | |
| PWA75735 | PUSHER JACKSCREW LPT | 1 | |
| PWA75751 | PUSHER JACKSCREW LPT | 1 | |
| PWA75946 | PULLER JACKSCREW | 1 | |
| PWA75947 | PULLER JACKSCREW | 1 | |
| PWA78173 | PULLER JACKSCREW | 1 | |
| PWA78176 | PULLER JACKSCREW | 1 | |
| PWA80212 | PULLER JACKSCREW ANGLE GEARBOX RADIAL DRIVE NUT WASHER | 1 | |
| PWA80214 | PULLER JACKSCREW ANGLE GEARBOX RADIAL DRIVE OIL DUCT | 1 | |
| PWA80238 | PULLER,JACKSCREW | 1 | |
| PWA80239 | PULLER,JACKSCREW | 1 | |
| PWA80240 | PULLER,JACKSCREW | 1 | |
| PWA80428 | PULLER/PUSHER,JACKSCREW | 1 | |
| PWA80636 | PULLER,JACKSCREW | 1 | |
| PWA81340 | PULLER, JACKSCREW | 1 | |
| PWA81797 | PULLER, JACKSCREW | 1 | |
| PWA81816 | PULLER,JACKSCREW | 1 | |
| PWA85033 | PULLER JACKSCREW HPC ROTOR ASSY | 1 | |
| PWA85034 | PULLER JACKSCREW HPC ROTOR ASSY | 1 | |
| PWA85035 | PULLER JACKSCREW HPC ROTOR ASSY | 7 | |
| PWA85036 | PULLER JACKSCREW HPC ROTOR ASSY | 1 | |
| PWA85078 | PULLER JACKSCREW LPT | 2 | |
| PWA85079 | PUSHER JACKSCREW LPT | 1 | |
| PWA85081 | PULLER JACKSCREW LPT | 1 | |
| PWA85082 | PULLER JACKSCREW LPT | 1 | |
| PWA85124 | PULLER JACKSCREW LPT | 1 | |
| PWA85195 | PULLER JACKSCREW | 1 | |
| PWA85262 | PULLER JACKSCREW | 1 | |
| PWA85307 | PULLER-JACKSCREW ENG ASSY N.4 BEARING COVER | 9 | |
| PWA85574 | PULLER JACKSCREW ENG ASSY | 1 | |
| PWA85601 | PULLER JACKSCREW SUPPORT HPC REAR | 1 | |
| PWA85676 | PULLER JACKSCREW | 1 | |
| PWA85688 | PULLER-JACKSCREW VARIABLE STATOR VANE ACTUATOR | 9 | |
| PWA856881 | PULLER JACKSCREW | 1 | |
| PWA85798 | PULLER JACKSCREW | 1 | |
| PWA85801 | PULLER JACKSCREW | 1 | |
| PWA85926 | PULLER JACKSCREW SUPPORT HPC REAR | 1 | |
| PWA85931 | PULLER-JACKSCREW ENGINE ASSEMBLY PMA ROTOR | 2 | |
| PWA85936 | PULLER JACKSCREW SUPPORT HPC REAR | 1 | |
| PWA86086 | PULLER-JACKSCREW GBX ASSY PMA | 1 | |
| PWA86484 | PULLER JACKSCREW | 1 | |
| PWA86540 | PULLER JACK SCREW HPT | 1 | |
| PWA86543 | PULLER JACKSCREW | 1 | |
| PWA86551 | PULLER JACKSCREW MAIN GEARBOX PMA ROTOR | 1 | |
| PWA86630 | PULLER JACKSCREW-OIL PUMP R I | 1 | |
| PWA87208 | PULLER, JACKSCREW | 1 | |
| PWA87208A | PULLER, JACKSCREW | 1 | |
| PWA87225 | PULLER, JACKSCREW - MAIN GEARBOX, PMA SEAL RETAINER | 3 | |
| PWA87227 | PULLER - JACKSCREW, PMA BEARING SEAT | 1 | |
| PWA88231 | PULLER JACKSCREW | 1 | |
| PWA8874 | PULLER-SCREW JACK OIL PUMP I/R | 1 | |
| PWA88774 | PULLER JACKSCREW-OIL PUMP R I | 1 | |
| PWC 32396 | JACKING SCREW | 7 | |
| PWC 32396-400 | JACKINGSCREW,GG CASE | 4 | |
| PWC30226 | JACKING SCREW | 1 | |
| PWC32346-400 | JACKSCREW | 1 | |
| PWC32396 | JACKSCREW | 7 | |
| PWC32396-1 | JACKING SCREWS | 1 | |
| PWC32396-100 | JACKING SCREW | 7 | |
| PWC32396-200 | Jackscrew | 8 | |
| PWC32396-200N | JACKSCREW - 2" | 1 | |
| PWC32396-300 | Jackscrew | 3 | |
| PWC32396-400 | Jackscrew | 4 | |
| PWC32396-400/PHP | JACKSCREW | 1 | |
| PWC32396-500 | Jackscrew | 2 | |
| PWC32396-600 | Jackscrew | 2 | |
| PWC32396-700 | Jackscrew | 1 | |
| PWC37207 | Jackscrew | 1 | |
| PWC38161 | JACK SCREW | 4 | |
| PWC38231 | LOCKING RING,ADAPTER,JACK SCREWS | 3 | |
| PWC38396 | JACKSCREW | 1 | |
| PWC42034 | JACKSCREWS | 1 | |
| PWC57220 | JACKING SCREW OIL PUMP | 6 | |
| PWC58513 | Jacking screw | 1 | |
| PWC89800 | SCREW JACKING SET | 1 | |
| PWC89800-075 | Jacking screw | 1 | |
| PWC89800-100 | SCREW JACKING N°2 | 1 | |
| PWC89800-150 | SCREW JACKING N°3 | 1 | |
| PWC89800-200 | SCREW JACKING N°4 | 1 | |
| PWC89800-250 | SCREW JACKING N°5 | 1 | |
| PWC89800-300 | SCREW JACKING N°6 | 1 | |
| PWC89800-350 | SCREW JACKING N°7 | 1 | |
| PWC89800-400 | SCREW JACKING N°8 | 1 | |
| PWC89800-50 | SCREW JACKING N°10 | 1 | |
| PWC89800-75 | SCREW JACKING N°9 | 1 | |
| PWC89800-85 | SCREW JACKING N°1 | 1 | |
| R1015 | SLAT SCREW JACK RIG INCL INSTRUMENT N01455 | 1 | |
| R1016 | FLAP SCREW JACK RIG INCL INSTRUMENT N01520 | 1 | |
| RB T102064 | SCREW SET, JACKING, TRANSMISSION | 3 | |
| RB T100929 | Jacking Screw Set | 3 | |
| RB T100929-3 | Jack Screw | 2 | |
| RB T101308 | Screw Set, Jack | 3 | |
| RB T101308-3 | Jack Screw | 1 | |
| RB T101338 | Screw Set, Jack | 2 | |
| RB T102064 | JACK SCREW (TEE HANDLE) | 3 | |
| RB T103222-101 | Jack Screw Set (Set of 3) | 2 | |
| RB6889889-4 | Jack Screw | 1 | |
| RB900G8920125-1 | Jack Screws (2 Pieces) | 1 | |
| RBT101308 | SCREW SET, JACK (3PCS) | 3 | |
| RBT101338 | JACKSCREW SET | 2 | |
| RBT102064 | JACK SCREW (TEE HANDLE) | 3 | |
| RBW6000G00231-8G | JACKSCREWS KIT | 2 | |
| RBW6000G00531-8G | JACKSCREWS (#10-32) | 2 | |
| RBW6005G00431-3G | Jack Screw Set | 2 | |
| RBW6005G00531-3G | Jack Screw | 2 | |
| RBW6005G00631-3G | Jack Screw | 2 | |
| RH1029 | JACK - AXLE, HAND CARRY, 11 TON CAPACITY, 5.7 CLOSED HEIGHT, 10.4 LIFT, 1.6 SCREW EXTENSION, 17.7 INCH EXTENDED HEIGHT, (HYDRO-GERAETEBAU GMBH & CO. K.G.) | 1 | |
| SE27-1001 | HOLDER ASSY -0 STABILIZER TRIM JACKSCREW USED TO | 1 | |
| SE27-1011 | HOLDER ASSY -0 STABILIZER TRIM JACKSCREW USED TO | 1 | |
| SE27-4503 | HOLDER JACKSCREW H/S | 1 | |
| SPL-13949 | TORQUE SOCKET - UPPER STOP, STABILIZER TRIM JACK SCREW | 1 | |
| SPL-14904 | TOOL SET - JACKSCREW | 1 | |
| SPL-14905 | GUIDE PIN SET - JACKSCREWS (PMA R/I) | 1 | |
| SPL-1728 | EQUIPMENT - HANDLING, STABILIZER JACKSCREW (DOME PRESSURE BULKHEAD) | 1 | |
| SPL-1752 | EQUIPMENT - CHECK, JACKSCREW BACKLASH, HORIZONTAL | 1 | |
| SPL-2262 | SET - TOOL, JACKSCREW, ENGINE DISASSEMBLY | 1 | |
| STD-6422 | SET OF 3EA JACKSCREWS - 1/4X28 UNF | 1 | |
| T100929 | JACK SCREW SET | 1 | |
| T100929-3 | JACK SCREW | 1 | |
| T101064 | JACK SCREWS | 1 | |
| T101308 | Jack Screw Kit | 3 | |
| T101308-3 | JACK SCREW | 1 | |
| T101308/T102064 | JACK SCREW SET | 1 | |
| T101338 | JACKSCREW SET | 1 | |
| T101338-3 | JACKSCREW | 1 | |
| T101440 | TRANSMISSION LEVER JACK SCREW | 1 | |
| T102064 | JACK SCREW (TEE HANDLE) | 1 | |
| T103222 | JACK SCREW | 1 | |
| T103222-101 | JACK SCREW SET SET OF 3 | 1 | |
| T103222-101 | JACKSCREW | 1 | |
| T103222-1Q1 | JACK SCREW SET | 1 | |
| T14564 | JACK-SCREW | 1 | |
| T240486 | JACKSCREW DRIVER | 1 | |
| TE27T-41001-8 | STAB TRIM JACK SCREW SCALE | 1 | |
| TOOL131 | McFarlane TOOL131 Cessna Aircraft Stabilizer Jack Screw Pin Removal Tool | 1 | |
| TR8770 | CARGO STRAPS-SCREWJACK R/I | 1 | |
| UT1271-1 | TOOL, SCREW JACK BLOCK | 2 | |
| WC32396-400 | JACKSCREW | 1 | |
| f 80014-1 | stab jack screw handling equiptment | 1 | |
| f 80014-2 | stab jack screw handling equiiptment | 13 | |
| lC6804 | TOOL SET, JACK SCREW-DISASSEMBLE FLANGES | 1 | |
| 190E2G0004 | JACKSCREW ASSY | 2 | |
| 98A27803000000 | WRENCH,FOR SLAT SCREWJACK UNLOCKING | 5 | |
| CHA141478 | BACKLASH CHECKING TOOL,FLAP SCREWJACKS 1 | 4 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
