| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| GSE170-LTC52014-A | SAFETY STA | 3 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 200911-CA | STAY-SAFETY Same as P/N TMHAS18-00-00 | 1 | |
| (CALIB) 98D07103000000 | DYNAMOMETER-SAFETY STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07103000001 | DYNAMOMETER-SAFETY STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V54503012000 | PYLON INSTALL SAFETY KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHAS02-00-00 | SAFETY STAY H 2640/4410 | 1 | |
| (CALIB) TMHAS13-00-00 | Safety Stay (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHAS18-00-00 | STAY SAFETY REAR FUSELAGE | 1 | |
| (CALIB) TMHAS20-10-00 | STAY, SAFETY (CALIBRATION) (CALIBRATION) | 1 | |
| 00160-115-001 | EXTENSION SAFETY STAY | 1 | |
| 03A5846C0100 | SAFETY STAY (TRONAIR) | 2 | |
| 1000-14H | SAFETY STAY, CARGO DOORS | 1 | |
| 1159GSE50204-3 | STATIC PORT SAFETY VALVE COVER | 2 | |
| 17069600401000-14H | SAFETY STAY, CARGO DOORS | 1 | |
| 2-11-987 | STANLEY® 1992 ROUNDED TIP SAFETY UTILITY BLADE (10 PK) | 1 | |
| 2000932CA | SAFETY STAY H 1000/2450 | 1 | |
| 200911-CA | Rear Safety Stay | 3 | |
| 200911CA | STAY-SAFETY | 3 | |
| 200932-CA | Safety Stay H 1000/2450 | 3 | |
| 200932CA | SAFETY STAY / PETIT ETAI | 3 | |
| 230.2200 | KUNZ TTS AIRCRAFT TIRE TEST STAND 65/28-AC (SAFETY CAGE DIGITAL INFLATING AUTOMETIC SYSTEM) | 1 | |
| 200911 | SAFETY STAY | 1 | |
| 1026737 | ADJUSTABLE SAFETY BARRIER | 1 | |
| 2001100 | model 2187 5-23' working height wing maintenance stand. 5-17' platform height, 750 lb. weight capacity, 4' x 4' platform with 10' x 10' railing for protected working area. Overhang: In the lowest position 5', from the edge of the safety fence to the fron | 1 | |
| 2020349 | (4) Fixed base module with 18" high (457mm) - For fixed installations that need to comply to the 18" rule for fire safety. | 1 | |
| 24MIT65B00002 | ATTACH LANYARD - WING/HORIZONTAL STABILIZER, SAFETY HARNESS | 2 | |
| 2C90503P01 | KEY FOR SAFETY NUT OF THE PROPELLER GEARBOX ADJUSTABLE SPAR | 1 | |
| 320008B | DEFLATOR - TIRE, VALVE CORE R & I AND TIRE DEFLATION, STANDARD/SMALL BORE (*SAFETY*) INCLUDES SILENCER STD CONFIG ON 757 (SR TECHNICS - IRELAND) | 7 | |
| 332A95-2100-00 | SAFETY TAY - FWD. STAYS | 1 | |
| 332A95‐2100‐00 | SAFETY STAY | 1 | |
| 390-151 | LARGE SAFETY CLIP PIN FOR ENGINE STAND | 1 | |
| 3MIT65B03670 | ADAPTER - SAFETY ROD, HORIZONTAL STABILIZER ACTUATOR | 5 | |
| 4063HA00 | TAILJACK SAFETY STAY A330 | 1 | |
| 421GGS0160-1 | STATIC PORT SAFETY VALVE | 3 | |
| 43-020 | Stainless Steel Aircraft Safety Wire (Diameter: .020") (Length: 937') (Add to cart: Add To Cart) | 1 | |
| 43-025 | Stainless Steel Aircraft Safety Wire (Diameter: .020") (Length: 937') (Add to cart: Add To Cart) (Diameter: .025") (Length: 599') (Add to cart: Add To Cart) | 1 | |
| 43-032 | Stainless Steel Aircraft Safety Wire (Diameter: .020") (Length: 937') (Add to cart: Add To Cart) (Diameter: .025") (Length: 599') (Add to cart: Add To Cart) (Diameter: .032") (Length: 366') (Add to cart: Add To Cart) | 1 | |
| 43-041 | Stainless Steel Aircraft Safety Wire (Diameter: .020") (Length: 937') (Add to cart: Add To Cart) (Diameter: .025") (Length: 599') (Add to cart: Add To Cart) (Diameter: .032") (Length: 366') (Add to cart: Add To Cart) (Diameter: .041") (Length: 223') (Add | 1 | |
| 4498016-000 | SAFETY PIN AND FLAG - CONSTANT DISPENSING SYSTEM | 2 | |
| 510-010 | PIPEFITTER'S CHAIN VISE, OR OTHER HOLDING STAND- TO HOLD RESERVOIR DURING DISSASSEMBLY/ASSEMBLY (AND SAFETY) | 1 | |
| 5L32 SERIES | TOOL - INSTALLATION, SAFETY CABLE, 0.032 INCH DIA SCT323 | 1 | |
| 600S-DL | Coilhose Safety Blow Guns (Description: Safety Standard) (Add to cart: Add To Cart) | 1 | |
| 6796185 | DRIFT - INSTALLATION, SAFETY COUPLING OUTER MEMBER SHAFT BUSHING | 2 | |
| 6F6400G02131 | T/R TAPERED FLANGE INSTALLATION SAFETY EQUIPMENT. | 1 | |
| 7-11-0003 | SAFETY STAY STA5211(FR85) | 1 | |
| 72P2500002Z006 | STATIC PORT / SAFETY VALVE COVER | 1 | |
| 8784B-SPC | SPECIAL PAINT COLOUR FOR PART # 8784B (STANDARD COLOUR IS SAFETY YELLOW) | 1 | |
| 95SPL-12757-D-0088 | SPANNER WRENCH INSTALL AND REMOVAL SAFETY HEAD TOOL | 1 | |
| 968RB | DEFLATOR - TIRE, VALVE CORE R & I AND TIRE DEFLATION, STANDARD/SMALL BORE (*SAFETY*) (SAFE-COR TOOLS) | 13 | |
| 98A27108028000 | STAZ SICHERHEITSKL.-ASA ACTUATOR SAFETY COLI.OR SET-ASA ACTUATOR | 3 | |
| 98D0710 3000 000 | DYNAMOMETER - SAFETY STAY TAIL | 20 | |
| 98D07103000 | DYNAMOMETER-SAFETY STAY | 1 | |
| 98D07103000000 | DYNAMOMETER-SAFETY STAY | 20 | |
| 98D07103000001 | DYNAMOMETER-SAFETY STAY | 11 | |
| 98D07103000200 | DYNAMOMETER-SAFETY STAY | 1 | |
| 98D07103000201 | DYNAMOMETER-SAFETY STAY | 1 | |
| 98D07103000202 | DYNAMOMETER-SAFETY STAY | 1 | |
| 98D07103000203 | DYNAMOMETER-SAFETY STAY | 1 | |
| 98D07103002042 | DYNOMETERSAFETYSTAY | 1 | |
| 98F07103000001 | SAFETY STAY ADAPTER | 1 | |
| 98F07103000002 | DYNAMOMETER – SAFETY STAY | 1 | |
| 98L07008510000 | SAFETY STAY ADAPTER | 1 | |
| 98L07008510001 | SAFETY STAY ADAPTER | 4 | |
| 98L21308497000 | BRIDGE-REMOVAL INSTALLATION SAFETY VALVES | 2 | |
| 98L52003000000 | ADJUSTABLE SAFETY BARRIER | 4 | |
| 98L52003000001 | ADJUSTABLE SAFETY BARRIER | 4 | |
| 98L52003000002 | ADJUSTABLE SAFETY BARRIER | 10 | |
| 98L52003003000 | ADJUSTABLE SAFETY BARRIER | 3 | |
| 98S53605001000 | SAFETY STAND | 3 | |
| 98S53605001000-REVA | SAFETY STAND | 1 | |
| 98V54503012000 | PYLON INSTALLATION SAFETY KIT | 1 | |
| A1-300.04 - x2 (WINGS) - 120t A1-1200.01 - x1 (NOSE) - 30t | HYDRO tripod jack set wide body with control stand A300/A310 /A330/A340 with Automatic Safety Nut Lock Manufacturer: LFT Lukassen (now Hydro)- MFD:1990 | 1 | |
| A20002-29 | ATTACH FITTING SET - WING AND HORIZONTAL STABILIZER, SAFETY HARNESS | 5 | |
| A20002-4 | HORIZONTAL STAB. SAFETY HARNESS | 7 | |
| A20002-51 | ATTACH FITTING SET - WING AND HORIZONTAL STABILIZER, SAFETY HARNESS | 1 | |
| AB07001-G85 | DYNAMOMETER SAFETY STAY | 1 | |
| AB07001-G8C | DYNAMOMETER SAFETY STAY | 1 | |
| AB07001-H1L | DYNAMOMETER SAFETY STAY | 1 | |
| AM1803-732 | AXLE SAFETY PIN FOR CFM56-5 ENGINE STAND | 1 | |
| ASL-07964W09-01 | SAFETY STAY-FAN COWL, JT9D & PW 4000 | 1 | |
| B20001 | ATTACH LANYARD WING/HORIZ. STAB SAFETY HARNESS | 1 | |
| B20001-12 | ATTACH FITTING EQUIPMENT - WING/HORIZONTAL, STABILIZER SAFETY HARNESS | 1 | |
| B20001-34 | ATTACH FITTING EQUIPMENT - WING/HORIZONTAL, STABILIZER SAFETY HARNESS | 3 | |
| B20001-5 | ATTACH LANYARD - WING/HORIZONTAL STABILIZER SAFETY HARNESS | 8 | |
| B52009-1 | MISCELLANEOUS TOOL, SAFETY PIN - POWER INSTALLATION, MAIN ENTRY DOORS | 19 | |
| BM20 | TOOL - INSTALLATION, SAFETY CABLE, 0.020 INCH DIA | 1 | |
| BM202 | TOOL - INSTALLATION, SAFETY CABLE, 0.020 INCH DIA | 1 | |
| BM203 | TOOL - INSTALLATION, SAFETY CABLE, 0.020 INCH DIA | 3 | |
| BM323 | TOOL - INSTALLATION, SAFETY CABLE, 0.032 INCH DIA | 4 | |
| BM325 | TOOL - INSTALLATION, SAFETY CABLE, 0.032 INCH DIA | 1 | |
| C35003-11 | SAFETY PIN AND FLAG - CONSTANT DISPENSING SYSTEM | 11 | |
| C35003-20 | SAFETY PIN AND FLAG - CONSTANT DISPENSING SYSTEM | 9 | |
| COM-2048 | INSTALLATION SAFETY CABLES | 1 | |
| CS-330-AG116 | SAFETY STAY - A330/A340 | 1 | |
| D00202K2D1B01B0 | JACK - SAFETY STAY | 1 | |
| D00645K2D1B01B0 | SAFETY STAY | 1 | |
| D00645K2D1E01B0 | TRIPOD JACK SAFETY STAY | 1 | |
| D01062K2D1E01B0 | SAFETY STAY - A330/A340 | 1 | |
| E71401-00 | SAFETY PIN AND FLAG - CONSTANT DISPENSING SYSTEM | 5 | |
| F2 | SAFETY STAY | 1 | |
| F2-SAFETY STAY | STAY SAFETY TAIL SUPPORT | 1 | |
| F71336-501 | LOCK SAFETY TRIM STA | 29 | |
| FENT101A21-004 | TAIL JACK (SAFETY STAY) | 1 | |
| G20011 | ATTACH LANYARD - WING/HORIZONTAL STABILIZER, SAFETY HARNESS | 1 | |
| G20011-1 | ATTACH LANYARD WING/HORIZONTAL STAB SAFETY HARNESS | 7 | |
| G57001 | SAFETY LANYARD EQUIP -0 HORIZ STAB UPPER SURFACE | 1 | |
| G57001-1 | SAFETY LANYARD EQUIPMENT - HORIZONTAL STABILIZER UPPER SURFACE | 4 | |
| G601R274202-1 | SAFETY TOLL - HORIZONTAL STABILIZER | 8 | |
| G601R274202???1 | SAFETY TOOL ??? HORIZONTAL STABILIZER | 8 | |
| G601R274202−1 | Safety Tool − Horizontal Stabilizer | 8 | |
| G604-274201-1 | SAFETY TOOL HORIZONTAL STAB | 4 | |
| G604-274201-1 | HORIZONTAL STAB SAFETY TOOL | 4 | |
| G604−274201−1 | Safety Tool − Horizontal Stabilizer | 4 | |
| GSE 128 | SAFETY STAY | 1 | |
| GSE170-LTC52014 | FORWARD AND AFT CARGO-DOORS SAFETY STAY | 1 | |
| GSE170-LTC52014-A | SAFETY STAY, CARGO DOORS | 3 | |
| GSE170-LTC52014A | SAFETY STAY, CARGO DOORS | 3 | |
| GSE170LTC52014A | SAFETY STAY,CARGO DOORS | 3 | |
| HLA4424-NM-PS | Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting with Safety | 1 | |
| HLA5625-30-GS | Inflation Handle Staubli RBE06 Inlet - High Flow Inflation Fitting with Safety HLA6226-GS Outlet | 1 | |
| HLA5625-30-PS | Inflation Handle Staubli RBE06 Inlet - Standard Inflation Fitting with Safety HLA6226-PS Outlet | 1 | |
| HLA5854-PS-GS | Inflation Handle with Two Flexible Extensions (One with Standard Fitting with Safety and One with High Flow Fitting with Safety) in Transport Cases | 1 | |
| HLA6226-PS | Standard Inflation Fitting with Safety 1/4"NPT Threaded | 1 | |
| HLA6505-GS | Digital Inflation Handle Staubli RBE06 Inlet - High Flow Inflation Fitting with Safety HLA6226-GS Outlet | 1 | |
| HLA6505-PS | Digital Inflation Handle Staubli RBE06 Inlet - Standard Inflation Fitting with Safety HLA6226-PS Outlet | 1 | |
| HLA6599-PS | Digital Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting with Safety | 1 | |
| HU44090 | SAFETY STAND | 1 | |
| HU45453 | Safety Stand | 1 | |
| IAE1J12188 | SAFETY STAY STAND | 24 | |
| J20004-1 | EQUIPMENT - PERSONNEL SAFETY, HORIZONTAL STABILIZER | 5 | |
| J20004-8 | EQUIPMENT - PERSONNEL SAFETY, HORIZONTAL STABILIZER | 5 | |
| J55002-37 | LOCK SAFETY STAB HOR | 10 | |
| JACK - SAFETY STAY | JACK - SAFETY STAY | 1 | |
| K20003-92 | UPPER WING/STAB SAFETY ACCESS EQUIPMENT | 8 | |
| K20004-30 | Equipment - Personnel, Shock Absorbing Lanyard, Horizontal Stabilizer (*Safety*) | 1 | |
| K20004-60 | EQUIPMENT - PERSONNEL SAFETY, HORIZONTAL STABILIZER | 7 | |
| LE96901Z01-1706960040 | SAFETY STAY, CARGO DOORS | 1 | |
| LE96901Z01-17069600401 000-14H | SAFETY STAY, CARGO DOORS | 1 | |
| LE96901Z01-17069600401000-14H | SAFETY STAY, CARGO DOORS | 1 | |
| M303 | TOOL - INSTALLATION, SAFETY CABLE, 0.032 INCH DIA | 1 | |
| M305 | TOOL - INSTALLATION, SAFETY CABLE, 0.032 INCH DIA | 2 | |
| M307 | TOOL - INSTALLATION, SAFETY CABLE, 0.032 INCH DIA CONTAINER - OIL RESISTANT, 5 U.S. GALLON (19 LITER) WRENCH - TORQUE | 2 | |
| MIT65B04430-1 | MISCELLANEOUS TOOL, SAFETY PIN - POWER INSTALLATION, MAIN ENTRY DOORS | 7 | |
| MODEL 8571 | BAUER SINGLE STATION INFLATION SAFETY CAGE | 1 | |
| MS02-2 | SAFETY STAY- STRESS JACK | 1 | |
| MS12 | SAFETY STAY | 1 | |
| MS20995C32 | SAFETY WIRE, STAINLESS STEEL | 22 | |
| MS35670-2A | Military Standard MS35670-2A Steel Valve, Safety Relief | 2 | |
| O6551 | SAFETY OUTLET INSTALLATION TOOL | 1 | |
| P2J1512422 | STAND (SAFETY CAGE) | 1 | |
| PH6810-NK | TOOL - INSTALLATION, SAFETY CABLE, 0.032 INCH DIA SCT323 | 3 | |
| PWA106390 | STAND,TRANSPORTATION SAFETY PLATFORM | 1 | |
| PWA107001 | STAND,TRANSPORTATION SAFETY PLATFORM | 1 | |
| PWA107321 | ENGINE PROPULSOR (SPLIT SHIP) SAFETY KIT-ENGINE SHIP STAND | 1 | |
| PWA107539 | SAFETY KIT-ENGINE SHIP STAND | 1 | |
| RBW6205G10151-3G | SAFETY STAY | 2 | |
| RRT058602 | SAFETY STAND | 1 | |
| SCT-TB1 | TEST BLOCK - SAFETY CABLE INSTALLER CALIBRATION | 5 | |
| SCT203 | TOOL - INSTALLATION, SAFETY CABLE, 0.020 INCH DIA | 2 | |
| SCT207 | TOOL - INSTALLATION, SAFETY CABLE, 0.0200 | 2 | |
| SCT323 | TOOL - INSTALLATION, SAFETY CABLE, 0.032 INCH DIA CONTAINER - FUEL RESISTANT, 5 U.S.-GAL (19 L) WRENCH - TORQUE | 3 | |
| SCT327 | TOOL - INSTALLATION, SAFETY CABLE, 0.032 INCH DIA | 5 | |
| SCTR203 | TOOL INSTALLATION, SAFETY CABLE | 2 | |
| SCTR323 | TOOL INSTALLATION, SAFETY CABLE | 4 | |
| SCTR325 | TOOL INSTALLATION SAFETY CABLE | 2 | |
| SCTR327 | SAFETY CABLE INSTALLATION TOOL 0.032 INCH DIA.5 INCH TOOL NOSE DMC | 4 | |
| SPEC: F2-SAFETY-STAY | Safety Stay | 1 | |
| STHT10368-0 | STANLEY - SQUEEZE SAFETY KNIFE | 1 | |
| SWC3B0M0109 | COVER: STATIC WICK,SAFETY, 3PK | 1 | |
| T-AM-90750-48T | ENGINE STAND SAFETY PIN | 1 | |
| TMH AE01-00-00 | DYNAMOMETER SAFETY STAY TC REQD | 1 | |
| TMH AS-01-01-00 | SAFETY STAY | 4 | |
| TMH AS01 | Safety Stay - 6.7 T | 1 | |
| TMH AS01-00-00 | SAFETY STAY | 8 | |
| TMH AS01-01-00 | SAFETY STAY | 4 | |
| TMH AS01-02-00 | SAFETY STAY EXTENSION | 2 | |
| TMH AS02 | Safety Stay - 6.6 T | 1 | |
| TMH AS02-00-00 | SAFETY STAY | 5 | |
| TMH AS02-02-00 | SAFETY STAY EXT EQUIPMENT | 3 | |
| TMH AS03 | Safety Stay - 8.8 T | 1 | |
| TMH AS09 | Safety Stay Shoring - 13 Ton | 1 | |
| TMH AS10 | Safety Stay Shoring- 11 Ton | 1 | |
| TMH AS10-10-00 | SAFETY STAY | 3 | |
| TMH AS12 | Safety Stay Rear - 13 Ton | 1 | |
| TMH AS18 | Safety Stay Tail - 1.7 Ton | 1 | |
| TMH AS18-0-00 | REAR SAFETY STAY | 1 | |
| TMH AS18-00-00 | SAFETY STAY | 6 | |
| TMH AS20-20-00 | SAFETY STAY- STRESS JACK | 1 | |
| TMH AS23 | Safety Stay Tail - 1.6 Ton | 1 | |
| TMH AS24 | Safety Stay Nose - 11 Ton | 1 | |
| TMH AS25 | Safety Stay Tail - 14 Ton | 1 | |
| TMH AS36 | Safety Stay Shoring - 11 Ton | 1 | |
| TMH AS37 | Safety Stay Extension | 1 | |
| TMH AS50 | Safety Stay Tail - 7 Ton | 1 | |
| TMH AS50-00-00 | 7 Tons Safety Stay - A320 CEO & NEO - Aft Fuselage - Tail | 1 | |
| TMH AS51 | Safety Stay Nose - 9 Ton | 1 | |
| TMH AS51-00-00 | B737 MAX - Nose Safety Stay | 1 | |
| TMH AS52-00-00 | Safety Stay A330 / A340 / A350 | 1 | |
| TMH-AS01-02-00 | SAFETY STAY EXTENSION WITH EXTENSION | 2 | |
| TMH-AS18 | SAFETY STAY TAIL - 1.7 TON | 1 | |
| TMHA 502-00-00 | SAFETY STAY FOR WING AND ENGINE SUPPORT | 1 | |
| TMHA S02-00-00 | SAFETY STAY FOR WING AND ENGINE SUPPORT | 5 | |
| TMHA02-00-00 | SAFETY STAY -TAIL ASSY | 1 | |
| TMHAS 01-00-00 | SAFETY STAY FOR FUSELAGE | 8 | |
| TMHAS 01-01-00 | SAFETY STAY FOR FUSELAGE | 4 | |
| TMHAS01-00-00 | Safety Stay H 1000/2450 | 8 | |
| TMHAS01-01-00 | SAFETY STAY | 4 | |
| TMHAS01-03-00 | Screw Assy for Safety stay AS01 and AS02, SCREW -750MM | 3 | |
| TMHAS010-00-00 | SAFETY STAY TOOL | 1 | |
| TMHAS02-00-00 | Safety Stay H 2640/4410 | 5 | |
| TMHAS02-002-00 | SAFETY STAY | 1 | |
| TMHAS02-01-00 | ATR42/72 WING SAFETY STAY FOR ZERO STRESS | 2 | |
| TMHAS02-02-00 | SAFETY STAY EXT EQUIPMENT | 3 | |
| TMHAS09-00-00 | SAFETY STAY | 2 | |
| TMHAS09-10-00 | SAFETY STAY | 1 | |
| TMHAS10-00-00 | SAFETY STAY | 2 | |
| TMHAS18-00-00 | SAFETY STAY | 6 | |
| TMHAS18-00-00 / 200911-CA | SAFETY STAY, REAR FUSELAGE | 1 | |
| TMHAS18-00-00-REVA | SAFETY STAY | 1 | |
| TMHAS18-00-00 | TAIL SAFETY STAY | 6 | |
| TMHAS180000 | STAY-SAFETY, REAR FUSELAGE | 6 | |
| TMHAS20-10-00 | STAY, SAFETY | 2 | |
| TMHAS50 | SAFETY STAY TAIL - 7 TON | 1 | |
| TMHAS50-00-00 | TRIPOD SAFETY, STAY | 1 | |
| V7950-93-S114 | COUPLING - AIR START WITH SAFETY SCREEN | 3 | |
| ZSBG2 | SAFETY B-GUN / 4.5" STAINLESS NOZZ ABG/3 | 1 | |
| 98D07103000001 | DYNAMOMETER-SAFETY STAY,USED TO PROVIDE | 11 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
