| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 100-48795 | REMOVAL FIXTURE | 1 | |
| 10C1113G01 | REMOVAL FIXTURE | 2 | |
| 11C1690 | REMOVAL FIXTURE | 1 | |
| 41937-T601 | REMOVAL FIXTURE | 1 | |
| 41937-T601 | REMOVAL FIXTURE | 1 | |
| 41937T601 | REMOVAL FIXTURE | 1 | |
| 56512- T2 | REMOVAL FIXTURE | 1 | |
| 856A1204G01 | Removal Fixture | 10 | |
| IAE1P17040 | REMOVAL FIXTURE | 1 | |
| 10C1113G01 | REMOVAL FIXTURE | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 9C1132G05 | FIXTURE - INSTALLATION/REMOVAL, LINE REPLACEABLE U | 1 | |
| -343 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 8 | |
| 100-48795 | MOTOR COVER AND HOUSING REMOVAL FIXTURE | 1 | |
| 100000-S96-3 | HOLDING FIXTURE PIN REMOVAL – MANIFOLD | 1 | |
| 10C1131G01 | FIXTURE, SPLINE BOLT REMOVAL (REMOVAL FIXTURE) | 1 | |
| 10C1178G01 | FIXTURE, REMOVAL - LPT INNER AIR TUBE | 1 | |
| 10C1218G02 | FIXTURE, PULLER - HPT AFT AIR SEAL (PULLER FIXTURE) (HIGHER REMOVAL FORCE FOR THE AFT AIR SEAL 2044M65P03) | 1 | |
| 10C1290 | FIXTURE - REMOVAL - BOOSTER MOD | 1 | |
| 10C1290G01 | FIXTURE REMOVAL | 1 | |
| 10C1318 | FIXTURE, REMOVAL IGNITER | 1 | |
| 10C1318G01 | FIXTURE, REMOVAL - IGNITER | 5 | |
| 11--4270 | FIXTURE - COVER REMOVAL | 1 | |
| 11--6300 | FIXTURE - REMOVAL | 1 | |
| 11-10788 | CHASSIS REMOVAL FIXTURE | 1 | |
| 8951 | BEARING REMOVAL FIXTURE | 1 | |
| 25014 | NOZZLE TIP AND AIR CAP REMOVAL FIXTURE | 1 | |
| 64501 | VALVE REMOVAL FIXTURE | 1 | |
| 289922 | FIXTURE, LOCKPLATE REMOVAL | 1 | |
| 501114 | Fixture – Removal Turbine Unit | 1 | |
| 833582 | FIXTURE REMOVAL AND INSTALLATION | 1 | |
| 1106469 | PRESSURE SEAL INSTALLATION/ REMOVAL FIXTURE | 1 | |
| 114-498 | BEARING CUP REMOVAL AND FIXTURES | 1 | |
| 11C3065 | FIXTURE - REMOVAL-HPTR AFT SEAL | 1 | |
| 11C3087 | FIXTURE - REMOVAL HP COMPR RTR - STG 5 DISK/STG 3-4 SPOOL | 1 | |
| 11C3087G01 | FIXTURE, REMOVAL - HPC ROTOR, STAGE 5 DISK, STAGES 3-4 SPOOL | 1 | |
| 11C3262G04 | FIXTURE - REMOVAL/INSTALLATION, ACCESSORY GEARBOX (AGB) | 1 | |
| 11C3319 | FIXTURE - REMOVAL - AIR TUBE - HPT STG 2 NOZZLE | 1 | |
| 11C3321 | FIXTURE - REMOVAL-STAGE 2 HPT SHROUD/HANGER SUB-ASSEMBLY | 1 | |
| 11C3322 | FIXTURE - REMOVAL-HP COMPR ROTOR CONE SHAFT | 1 | |
| 11C3322G01 | FIXTURE, REMOVAL - HPC ROTOR FORWARD SHAFT | 1 | |
| 11C3353G03 | FIXTURE, INSTALL/REMOVAL - TUBE CARRIER RETAINING NUT - HPC ROTOR | 1 | |
| 11C3388 | FIXTURE - REMOVAL-STG 2 BLISK/SPOOL 3-4 HP COMPR RTR | 1 | |
| 11C3437 | FIXTURE, REMOVAL - SEAL, LPT AFT | 1 | |
| 11C4246 | FIXTURE - REMOVAL - CASE HP COMPR. FORWARD LOWER | 1 | |
| 11C4246G03 | FIXTURE, REMOVAL-CASE, HPC, FORWARD, LOWER | 1 | |
| 11C4412G06 | FIXTURE-REMOVAL/INSTALLATION VFEG | 1 | |
| 11C4434 | FIXTURE, REMOVAL - SEAL, LPT AFT | 1 | |
| 11C4589 | FIXTURE - REMOVAL-AFT EXTENSION CASE | 1 | |
| 11C4690 | FIXTURE, REMOVAL - HDS COVER | 1 | |
| 11C4690G01 | FIXTURE, REMOVAL - HDS COVER | 1 | |
| 11C4690G02 | FIXTURE, REMOVAL - HORIZONTAL DRIVE SHAFT COVER | 1 | |
| 11C4694 | FIXTURE, REMOVAL - LINK PIN | 1 | |
| 11C4818G01 | FIXTURE, REMOVAL - STAGE 2 BLISK/SPOOL, 3-4 HPC ROTOR | 1 | |
| 18C1224 | FIXTURE, REMOVAL - AFT RETAINER, STG 2 HPT | 1 | |
| 18C1225 | FIXTURE, REMOVAL - STG 2 HPT SHROUD / HANGER SUB ASSY | 1 | |
| 1C6872G01 | Fixture, Inst/Removal -AGB Horizontal | 1 | |
| 1C6902G01 | CASING REMOVAL FIXTURE (2 REQUIRED) | 1 | |
| 1C6978 | FIXTURE, INSTALL. & REMOVAL, HORIZ. - PWR TURB. | 1 | |
| 1C6978 REV G | FIXTURE, INSTALL. & REMOVAL, HORIZ. - PWR TURB. | 1 | |
| 1C6988G02 | AFT TURN OVER FIXTURE (TMF REMOVAL) | 1 | |
| 1C8182 | FIXTURE SET - REMOVAL MATING SEAL | 2 | |
| 1C8182 REV B | FIXTURE SET - REMOVAL MATING SEAL | 1 | |
| 1C8182G01 | Fixture set, Mating Seal Removal | 1 | |
| 1C9422G01 | FIXTUREINSTALLATION/REMOVAL CRF AFT CAS | 1 | |
| 1C9422G02 | Fixture, Installation/Removal - CRF Aft Case | 1 | |
| 1C9618 | E.FIXTURE - INSTAL/REMOVAL | 1 | |
| 2024272-1 | Bearing Removal Fixture | 1 | |
| 2024272-1PM | BEARING REMOVAL FIXTURE | 1 | |
| 2024544-1 | Bearing Removal Fixture | 1 | |
| 2024783-1 | Bearing Removal Fixture | 1 | |
| 2024783-1PM | BEARING REMOVAL FIXTURE | 1 | |
| 2025254-2 | Shaft removal fixture | 1 | |
| 2025261-1 | BEARING REMOVAL FIXTURE | 1 | |
| 204783-1 | BEARING REMOVAL FIXTURE | 1 | |
| 206R2200-10 | BEARING REMOVAL FIXTURE | 1 | |
| 21C7765G01 | FIXTURE, IGNITER REMOVAL | 1 | |
| 247C5260 | FIXTURE - FORWARD ADAPTER - REMOVAL | 1 | |
| 25049T4 | TEST AND REMOVAL FIXTURE | 1 | |
| 2550958 | FIXTURE, PIN, INSTALLATION & REMOVAL | 1 | |
| 2558783 | FIXTURE, BEARING CUP/SLEEVE REMOVAL, IB AND OB WHEEL HALF | 1 | |
| 20252542 | SHAFT REMOVAL FIXTURE TOOL | 1 | |
| 291986-1 | PLANET SHAFT REMOVAL FIXTURE | 1 | |
| 298029-1 | GEARBOX HANDLING FIXTURE (TO HOLD GEARBOX STABLE FOR REMOVAL OR INSTALLATION) | 1 | |
| 298057-1 | GEARBOX HANDLING FIXTURE (TO HOLD GEARBOX STABLE FOR REMOVAL OR INSTALLATION) | 1 | |
| 2C14107G01 | FIXTURE, REMOVAL/INSTALL-AGB DRIVE SHAFT | 10 | |
| 2C14138 | FIXTURE, REMOVAL-MATING SEAL RINGS - ACCESS. GEARBOX | 1 | |
| 2C14138 REV B | FIXTURE, REMOVAL-MATING SEAL RINGS - ACCESS. GEARBOX | 1 | |
| 2C14138G01 | FIXTURE SET, REMOVAL | 11 | |
| 2C14138G02 | FIXTURE REMOVAL MATING SEAL RINGS ACC GEARBOX CF6-80C2 | 12 | |
| 2C14661G01 | FIXTURE, INSTALLATION/REMOVAL COMPRESSOR REAR FRAME ASSEMBLY | 2 | |
| 2C14661G02 | FIXTURE, REMOVAL COMPRESSOR EAR FRAME ASSEMBLY | 1 | |
| 2C14668G01TK | FIXTURE SET, INSTALLATION AND REMOVAL LPT NOZZLES STAGE 1 | 1 | |
| 2C14668G02 | FIXTURE SET, INSTALLATION AND REMOVAL - LPT NOZZLES STAGE 1 | 1 | |
| 2C14676G01 | FIXTURE, INSTALLATION / REMOVAL ‐ OUTER AIR TUBE, STAGE 1 NOZZLE | 1 | |
| 2C14691G01 | FIXTURE, REMOVAL/INS | 2 | |
| 2C14718G02 | FIXTURE, INSTALLATION AND REMOVAL - AIR TUBE, HPT STAGE 2 NOZZLE | 2 | |
| 2C14785G02 | FIXTURE, REMOVAL | 1 | |
| 2C14825G01 | FIXTURE, INSTALLATION AND REMOVAL - HPT | 1 | |
| 2C14825G03 | FIXTURE, INSTALLATION AND REMOVAL - HPT | 1 | |
| 2C14836G01 | FIXTURE, REMOVAL, HP | 1 | |
| 2C14838G01 | FIXTURE, REMOVAL - H | 1 | |
| 2C14846G01 | CENTERING FIXTURE - CVT REMOVAL/INSTALLATION | 1 | |
| 2C14871G03 | Fixture, Installation/Removal - Manifold No. 1 Bearing | 1 | |
| 2C18064G01 | FIXTURE REMOVAL TOOL | 1 | |
| 2C6122 | FIXTURE, INSTALL & REMOVAL - BOLTS, FWD FAN SHAFT | 1 | |
| 2C6122 REV G | FIXTURE, INSTALL & REMOVAL - BOLTS, FWD FAN SHAFT | 1 | |
| 2C6122G03 | FIXTURE, REMOVAL, BOLTS - FORWARD FAN SHAFT | 1 | |
| 2C6356G03 | INSTALLATION/REMOVAL FIXTURE | 1 | |
| 2C6998G05 | FIXTURE SET REMOVAL MATING SEAL RINGS-ACCESORY GEARBOX | 2 | |
| 2C6998G06 | FIXTURE SEAL REMOVAL | 3 | |
| 2C8007 | FIXTURE,REMOVAL-TRIWING SCREW | 1 | |
| 2C8008 | FIXTURE, REMOVAL - FAN STATOR FAIRING | 1 | |
| 2C8008 REV A | FIXTURE, REMOVAL - FAIRING, FAN STATOR | 1 | |
| 2C8008G01 | REMOVAL FIXTURE - FAN STATOR FAIRING | 4 | |
| 2C8008G01TK | FIXTURE, REMOVAL-FAIRING, FAN STATOR | 1 | |
| 2C8072G02 | FIXTURE SEAL REMOVAL | 2 | |
| 2C8072G03 | FIXTURE SEAL REMOVAL | 1 | |
| 2C8073G01 | FIXTURE, REMOVAL AND | 2 | |
| 2C8073G05 | FIXTURE, REMOVAL AND | 13 | |
| 2C81575G02 | FIXTURE, REMOVAL, BLADE RETAIN | 1 | |
| 2C81668G01 | FIXTURE, REMOVAL, BEARING, AXI | 1 | |
| 2C91175G01 | FIXTURE-REMOVAL PTO BEARING | 1 | |
| 2CF65B80511 | FIXTURE - SPRING REMOVAL AND INSTALLATION, FORCE LIMITER, LATERAL CONTROL INPUT BUS | 1 | |
| 30R0496G01 | FIXTURE,REMOVAL,BELLCRANK ASSY-HPC | 1 | |
| 3403167-1 | TURBINE REMOVAL FIXTURE | 1 | |
| 3791069-1 | FIXTURE PIN REMOVAL | 1 | |
| 3791774-1 | PIN REMOVAL FIXTURE | 1 | |
| 3J12763 | Fixture, Removal | 1 | |
| 58T-108 | FIXTURE-BODY REMOVAL / INSTALLATION | 3 | |
| 5952166-59 | RUDDER REMOVAL FIXTURE, L/H | 1 | |
| 5952166-60 | RUDDER REMOVAL FIXTURE, R/H | 1 | |
| 65885T3 | Bearing Removal Holding Fixture | 1 | |
| 6795872 | Fly Weight Snap Ring Removal Fixture | 4 | |
| 6872288 | FIXTURE - INSTALLATION AND REMOVAL, STARTER SHAFT SEAL | 1 | |
| 6877014 | PURGE FIXTURE, AIR (CHECK VALVE REMOVAL) BACK PRESSURES FUEL NOZZLE TO BLOW CHIPS OUT OF NOZZLE DURING CHECK VALVE MACHINING OPERATION. | 1 | |
| 6877108 | ASSEMBLY FIXTURE ASSISTS REMOVAL OF CARTRIDGE VALVE FROM FUEL NOZZLE CARTRIDGE VALVE CAVITY USING AIR PRESSURE THROUGHTIP END. | 1 | |
| 7C2142G01 | FIXTURE, REMOVAL - SEAL LPT AFT INNER | 1 | |
| 8077C | CRANKSHAFT COUNTERWEIGHT BUSHING REMOVAL / INSTALLER FIXTURE | 1 | |
| 813689T | FILL VALVE REMOVAL FIXTURE | 1 | |
| 813690T1 | CLOSURE REMOVAL FIXTURE | 1 | |
| 831384-1 | Fixture, Spinner Removal | 1 | |
| 833129-1 | BEARING AND GEAR REMOVAL FIXTURE | 1 | |
| 833472-1 | FIXTURE BEARING REMOVAL | 1 | |
| 833473-1 | Pin Removal Fixture | 1 | |
| 833544-1 | FIXTURE REMOVAL SEAL | 1 | |
| 833545-1 | FIXTURE BEARING REMOVAL | 1 | |
| 833667-1 | FIXTURE INSTALLATION AND REMOVAL SEAL | 1 | |
| 833667-2 | Seal Installation&Removal fixture | 1 | |
| 833916-1 | FIXTURE REMOVAL BEARING AND SPACER | 1 | |
| 833916-2 | BEARING & SPACER REMOVAL FIXTURE | 1 | |
| 833935-1 | FIXTURE INLET HOUSING REMOVAL | 1 | |
| 834044-1 | FIXTURE SEAL REMOVAL | 1 | |
| 834202-1 | BUSHING REMOVAL FIXTURE | 1 | |
| 834234-1 | Pin Removal Fixture | 1 | |
| 834247-2 | Pin Removal Fixture | 1 | |
| 834331-1 | Bearing Removal Fixture | 1 | |
| 834332-1 | Seal Removal Fixture | 1 | |
| 834435-1 | Pin Installation and Removal Fixture | 1 | |
| 834443- | SEAL REMOVAL FIXTURE | 1 | |
| 834447-1 | SEAL REMOVAL FIXTURE | 1 | |
| 834639-1 | SHAFT REMOVAL FIXTURE | 1 | |
| 834769-1 | FIXTURE REMOVAL DIFFUSER | 1 | |
| 835088-1 | Gear Removal Fixture | 1 | |
| 835220-1 | DEFLECTOR REMOVAL FIXTURE | 1 | |
| 835224 -1 | SEAL REMOVAL FIXTURE | 1 | |
| 835224-1 | SEAL REMOVAL FIXTURE | 1 | |
| 835331-1 | SHAFT REMOVAL FIXTURE | 1 | |
| 835558-1 | SEAL REMOVAL FIXTURE | 1 | |
| 851-30486-506 | FIXTURE-BODY REMOVAL / INSTALLATION | 11 | |
| 856A 2384G01 | FIXTURE REMOVAL/INSTALLATION LPT. BLADES 1-5 | 1 | |
| 856A-2677-G01 | FIXTURE -REMOVAL AND INSTALLATION | 21 | |
| 856A1040 | FIXTURE, REMOVAL - IGB BEARING AND SPACER | 1 | |
| 856A1040 G01 | Fixture Removal ‐ IGB Bearing and Spacer | 8 | |
| 856A1040G01 | Fixture, Removal - IGB Bearing and Spacer (removal fixture) | 8 | |
| 856A1070 | FIXTURE, SPLINE BOLT REMOVAL | 1 | |
| 856A1070 G01 | Fixture Removal ‐ Spline Bolt | 2 | |
| 856A1070G01 | FIXTURE, SPLINE BOLT REMOVAL | 2 | |
| 856A1070G02 | FIXTURE, SPLINE BOLT REMOVAL | 7 | |
| 856A1070G03 | FIXTURE, SPLINE BOLT REMOVAL | 1 | |
| 856A1070P03 | FIXTURE, REMOVAL - SPLINE BOLT (REMOVAL FIXTURE) | 2 | |
| 856A1099 | FIXTURE, INSTALLATION AND REMOVAL - HPT AFT OUTER AIR SEAL | 1 | |
| 856A1099 G01 | Fixture Install/Removal ‐ HPT Aft Outer Air Seal | 6 | |
| 856A1099G01 | FIXTURE INSTALL/REMOVAL HPT AFT OUTER AIR SEAL | 6 | |
| 856A1099P01 | FIXTURE, INSTALL/REMOVAL - HPT AFT OUTER AIR SEAL (INSTALL/REMOVAL FIXTURE) | 1 | |
| 856A1180 | FIXTURE, REMOVAL - HPT STATOR/LPT NOZZLE MODULE | 1 | |
| 856A1180G02 | FIXTURE, REMOVAL - HPT STATOR/LPT NOZZLE MODULE | 1 | |
| 856A1204 | FIXTURE, REMOVAL HIGH PRESSURE COMPRESSOR ROTOR | 1 | |
| 856A1204 G01 | Fixture Removal ‐ HPCR (removal fixture) | 10 | |
| 856A1204G01 | FIXTURE, REMOVAL-HPC | 10 | |
| 856A1252G02 | FIXTURE, REMOVAL HIGH PRESSURE | 5 | |
| 856A1299 | FIXTURE,BLADE REMOVAL | 1 | |
| 856A1299G02 | Fixture Bld Removal HPTR | 2 | |
| 856A1358 | FIXTURE, INSTALL/REMOVE - MODULE 12 (INSTALLATION/REMOVAL FIXTURE) | 2 | |
| 856A1358G02 | FIXTURE, INSTALL/REMOVE - MODULE 12 (INSTALLATION/ REMOVAL FIXTURE) | 7 | |
| 856A1430G02 | IGB HOLDING FIXTURE - BEARING REMOVAL | 7 | |
| 856A1431G03 | FIIXTURE, RESTRAINING-HPT NOZZLE ASSEMB(THE RESTRAIN FIXTURE IS USED TO RESTRAIN THE NOZZLE SEGMENTS OF THE HP TURBINE NOZZLE ASSEMBLY CIRCUMFERENTIALLY DURING THE INSTALLATION OR REMOVAL FROM THE COMPRESSOR REAR FRAME (CRF) | 7 | |
| 856A1437G01 | Fixture, Blade Removal | 1 | |
| 856A1437G02 | FIXTURE, BLADE REMOVAL | 1 | |
| 856A1478 | FIXTURE, REMOVAL NO. 3 BRG. AFT STATIONARY SEAL | 1 | |
| 856A1478 REV A | FIXTURE, REMOVAL NO. 3 BRG. AFT STATIONARY SEAL | 1 | |
| 856A1490G05 | MOD 12 REMOVAL/ISTALLATION FIXTURE | 6 | |
| 856A1492 | FIXTURE, REMOVAL | 1 | |
| 856A1492G01 | FIXTURE, REMOVAL - HP TURB FWD SHAFT BOLTS | 1 | |
| 856A1492G02 | FIXTURE, REMOVAL - HP TURBINE FORWARD SHAFT BOLTS | 7 | |
| 856A1603G03 | FIXTURE, INSTALL/REMOVAL-HPT. ROTOR FWD. OUTER SEAL | 3 | |
| 856A1603G05 | FIXTURE. INSTALLFREMOVE - HPTR FORWARD OUTER SEAL (INSTALL/REMOVAL FIXTURE) (SB 72-0643) | 2 | |
| 856A1604 | FIXTURE, SPLINE BOLT REMOVAL | 1 | |
| 856A1604G01 | FIXTURE. REMOVAL - BOLT INNER NOZZLE SUPPORT | 1 | |
| 856A1604G02 | FIXTURE, REMOVAL - BOLT INNER NOZZLE SUPPORT | 9 | |
| 856A1621G01 | FIXTURE INSTAL/REMOVAL ROTOR FWD. OUT SEAL | 3 | |
| 856A1826 | FIXTURE, REMOVAL - NO. 3 BEARING AFT STATIONARY SEAL (REMOVAL FIXTURE) | 1 | |
| 856A1826G01 | FIXTURE, REMOVAL - NO. 3 BEARING AFT STATIONARY SEAL (REMOVAL FIXTURE) | 3 | |
| 856A1868 | FIXTURE, INSTALL/REMOVE - HPTR FORWARD OUTER SEAL (INSTALL/REMOVAL FIXTURE) | 1 | |
| 856A1868G01 | FIXTURE, INSTALIFREMOVE - HPTR FORWARD OUTER SEAL (INSTALL/REMOVAL FIXTURE) | 4 | |
| 856A1868G03 | FIXTURE, INSTALL/REMOVE - HPTR FORWARD OUTER SEAL (INSTALL/REMOVAL FIXTURE) | 3 | |
| 856A2010 | FIXTURE,REMOVAL HP TURB FWD SHAFT BOLT | 1 | |
| 856A2010 G01 | FIXTURE, REMOVAL - HPT FORWARD SHAFT | 1 | |
| 856A2010G01 | HPT FORWARD SHAFT REMOVAL FIXTURE | 1 | |
| 856A2316G01 | FIXTURE, INSTALL/REMOVAL | 13 | |
| 856A2384G01 | FIXTURE REMOVAL/ INSTAL LPT BLADES 1-5 | 1 | |
| 856A2409G02 | REMOVAL FIXTURE - LPT STG 1 OUTER STA AIR SEAL | 2 | |
| 856A2655 | FIXTURE - INSTAL/REMOVAL RADIAL | 1 | |
| 856A2655G03 | FIXTURE, INSTALL/REMOVAL OF RADIAL DRIVE SHAFT HOUSINGS | 5 | |
| 856A2677 | FIXTURE INSTALLATION AND REMOVAL | 2 | |
| 856A2677G01 | REMOVAL/INSTALL FIXTURE | 21 | |
| 856A2677G01 | FIXTURE - REMOVAL AND INSTALLATION, REMOVABLE RETAINING RING | 21 | |
| 856A2705G01 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 1 | |
| 856A2705G02 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 3 | |
| 856A2705G03 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 4 | |
| 856A3358 | #4 BEARING INSTALLATION/REMOVAL FIXTURE | 1 | |
| 856A3503 G01 | Fixture Removal/Installation and Handling | 3 | |
| 856A3503 G02 | Fixture Removal/Installation and Handling | 5 | |
| 856A3503G01 | FIXTURE REMOVAL/ INSTALLATION AND HANDLING | 3 | |
| 856A3503G02 | BOOSTER REMOVAL/INSTALLATION FIXTURE. | 5 | |
| 856A3752 | FIXTURE, REMOVAL - STAGE 1-2-3 OUTER STATIONARY AIR SEAL (FIXTURE) | 1 | |
| 856A3752 G04 | Removal Fixture - Stage 1, 2 and 3 Outer Sta Air Seal | 8 | |
| 856A3752G04 | Fixture, Removal - Stage 1-2-3 Outer Stationary Air Seal (fixture) | 8 | |
| 856A4624 | FAN ABRADABLE REMOVAL FIXTURE | 1 | |
| 856AI070 | FIXTURE, SPLINE BOLT REMOVAL | 1 | |
| 8574815 | Fixture – Removal, Actuator Sleeve | 1 | |
| 8945-0-2001-R | Bearing Removal Fixture | 1 | |
| 8951-0-2001-R | Bearing Removal Fixture | 1 | |
| 8951/895100 | BEARING REMOVAL FIXTURE | 1 | |
| 8C2071 | FIXTURE, REMOVAL - CARBON SEAL, NO. 4 BEARING | 1 | |
| 8C2123 | FIXTURE, REMOVAL-CDP SEAL | 1 | |
| 8C2125 | FIXTURE, REMOVAL - ROTOR BLADE LOCKING LUGS NON FETT | 1 | |
| 8C2589 | FIXTURE, REMOVAL – HORIZONTAL SHAFT PROTECTOR | 1 | |
| 8C2590 | FIXTURE, REMOVAL – HORIZONTAL SHAFT | 1 | |
| 8C2592 | FIXTURE, REMOVAL – LINK PIN | 1 | |
| 8C2666 | FIXTURE INSTALL/ REMOVAL LINE REPLACEMENT UNITS | 1 | |
| 8C2666G01 | FIXTURE INSTALLATIO N/REMOVAL | 1 | |
| 8C2666G02 | FIXTURE - INSTALLATION/REMOVAL, LINE REPLACEABLE UNITS | 1 | |
| 8C3174 | FIXTURE - C-CLIP REMOVAL | 1 | |
| 9429M22 | FIXTURE, SUPPORT-REMOVAL FIXTURES, HP COMPR ROTOR | 1 | |
| 9429M22G01 | FIXTURE, SUPPORT - REMOVAL FIXTURES, HPC ROTOR | 1 | |
| 956A1040 | FIXTURE - REMOVAL-AFT SEAL - HPT ROTOR | 1 | |
| 956A1104 | FIXTURE - REMOVAL - HPCR SUPPORT TUBE | 1 | |
| 956A1115 | FIXTURE - REMOVAL/INSTALLATION RETAINING NUT | 1 | |
| 956A1230 | FIXTURE - REMOVAL - STAGE 2 SHROUD/HANGER | 1 | |
| 956A1231 | FIXTURE - TORQUE - CDP NUT REMOVAL INNER NOZZLE | 1 | |
| 956A1232 | FIXTURE - REMOVAL - AFT RETAINER - STG 2 HPT | 1 | |
| 956A1233 | FIXTURE - REMOVAL - AIR TUBE | 1 | |
| 956A1261 | FIXTURE - REMOVAL - STAGE 1 HPT SHROUD HANGERS | 1 | |
| 956A1508 | FIXTURE - REMOVAL - PINION OUTER RACE | 1 | |
| 956A1513 | FIXTURE - REMOVAL - PINION BEARING | 1 | |
| 956A1514 | FIXTURE - REMOVAL - OUTER RACER - 3R BEARING | 1 | |
| 956A1515 | FIXTURE - REMOVAL - NO 3B BRB FWD IR/OIL DISTRIBUTER | 1 | |
| 956A1561 | FIXTURE - REMOVAL - PINION OUTER RACE | 1 | |
| 956A3079 | FIXTURE - REMOVAL - AFT SEAL - HPT ROTOR | 1 | |
| 956A3090 | FIXTURE - REMOVAL - STATIONARY SEAL - B SUMP | 1 | |
| 956A3104 | FIXTURE - REMOVAL - HPC TUBE SUPPORT | 1 | |
| 956A3115 | FIXTURE - TORQUE - IMPELLER TUBE NUT REMOVAL | 1 | |
| 956A3179 | FIXTURE - REMOVAL - CDP / STG 6-10 SPOOL | 1 | |
| 956A3230 | FIXTURE - REMOVAL - STG 2 HPT SHROUD / HANGER SUB ASSY | 1 | |
| 956A3232 | FIXTURE - REMOVAL - AFT RETAINER - STG 2 HPT | 1 | |
| 956A3532 | FIXTURE - REMOVAL - BEARING RACE | 1 | |
| 956A3535 | FIXTURE - REMOVAL - OIL SCOOP - NO 3 BRG | 1 | |
| 956A6019 | FIXTURE - REMOVAL - IGB DAMPER - HUB FAN FRAME | 1 | |
| 956A6065G01 | FIXTURE - REMOVAL, FAN DISK SPACER | 2 | |
| 956A6452 | FIXTURE - REMOVAL - LPT BLADE STAGE 7 | 1 | |
| 956A6524 | FIXTURE - REMOVAL - NO.5 BEARING OUTER CASE | 1 | |
| 956A6526 | FIXTURE - INSTALLATION AND REMOVAL - RETAINING RING | 1 | |
| 956A6637G02 | FIXTURE, REMOVAL/INSTALLATION FAN SPINNER | 3 | |
| 956A6678 | FIXTURE - REMOVAL/INSTALATION - VFG | 1 | |
| 956A6678G02 | FIXTURE, REMOVAL/INSTALLATION | 1 | |
| 956A7014 | FIXTURE - REMOVAL/INSTALL-PANEL FLOW PATH | 1 | |
| 956A7014G01 | FIXTURE - REMOVAL/INSTALL-PANEL FLOW PATH | 4 | |
| 956A7015 | FIXTURE - REMOVAL/INSTALL-SPLITTER FAIRING | 1 | |
| 956A7617 | FIXTURE - REMOVAL/INSTALL - FRONT SPINNER | 1 | |
| 956A7617G02 | FIXTURE, REMOVAL/INSTALL - FRONT SPINNER | 5 | |
| 956A7617G03 | FIXTURE, REMOVAL/INSTALL - FRONT SPINNER | 1 | |
| 956A7618G02 | FIXTURE, REMOVAL/INSTALLATION NEO | 4 | |
| 956A7639 | FIXTURE - REMOVAL - INLET DRIVE GENERATOR | 1 | |
| 956A7639G01 | INLET DRIVE GENERATOR REMOVAL FIXTURE 1 | 1 | |
| 956A8076G02 | FIXTURE - TGB REMOVAL/INSTALLATION | 3 | |
| 956A8650G01 | FIXTURE - TGB REMOVAL/INSTALL | 1 | |
| 956A8670 | FIXTURE - REMOVAL/INSTALL - FRONT SPINNER | 1 | |
| 956A8670G01 | FIXTURE, REMOVAL/INSTALL - FRONT SPINNER | 3 | |
| 956A8670G02 | FIXTURE, REMOVAL/INSTALL FRONT SPINNER | 4 | |
| 956A8685G01 | FIXTURE TGB REMOVAL | 1 | |
| 956A8685G02 | FIXTURE - TGB SLIDE REMOVAL AND INSTALLATION | 4 | |
| 98S71003000002 | FIXTURE ENGINE - PROPELLER REMOVAL AND INSTALLATION | 10 | |
| 98S71003000230 | AXLE PIN FOR ENG /PROP REMOVAL INSTALLATION FIXTURE | 1 | |
| 9C1025 | FIXTURE REMOVAL | 1 | |
| 9C1025G01 | FIXTURE REMOVAL | 1 | |
| 9C1132G03 | SPL-331 FIXTURE - INSTALLATION/REMOVAL, LINE REPLACEABLE UNITS 777-300ER | 3 | |
| 9C1132G04 | FIXTURE - INSTALLATION/REMOVAL, LINE REPLACEABLE UNITS WITH MAX LOAD CAPACITY OF 100LB | 1 | |
| 9C1132G05 | FIXTURE - INSTALLATION/REMOVAL, LINE REPLACEABLE U | 1 | |
| 9C1132G06 | FIXTURE - INSTALLATION/REMOVAL, LINE REPLACEABLE U | 3 | |
| 9C1172G03 | FIXTURE - REMOVAL/INSTALLATION, AGB | 1 | |
| 9C1253 | FIXTURE, REMOVAL - SHROUD RETA | 1 | |
| 9C1361G01 | FIXTURE, REMOVAL/INSTALLATION SPINNER, FAN ROTOR (FIXTURE) | 1 | |
| 9C3036G01 | FIXTURE - REMOVAL/INSTALLATION, FAN ROTOR SPINNER | 2 | |
| 9C3036G02 | Fixture - Removal/Installation, Fan Rotor Spinner | 1 | |
| 9C3190 | UNISON RING BUSHING REMOVAL/INSTALLATION FIXTURE | 1 | |
| 9C33036G01 | FIXTURE, REMOVAL-FAN ROTOR SPINNER | 1 | |
| A27029-28 | REMOVAL/INSTALLATION FIXTURE - LOAD LIMITER AILERON CONTROL SPRING | 1 | |
| A813689T | FILL VALVE REMOVAL FIXTURE | 1 | |
| A813690T-4 | CLOUSER REMOVAL FIXTURE | 1 | |
| A813690T4 | CLOSURE REMOVAL FIXTURE | 1 | |
| A813690T5 | DISC ASSEMBLY REMOVAL FIXTURE | 1 | |
| A820196T | SUPPORT FIXTURE CLOSURE REMOVAL | 1 | |
| A820496T | CLOSURE REMOVAL SUPPORT FIXTURE | 1 | |
| AD13689T | FILL VALVE REMOVAL FIXTURE | 1 | |
| AGE17630 | FIXTURE, HOLDING, BEARING LINER REMOVAL | 1 | |
| AGE17638 | Fixture, Holding, Bearing Liner Removal | 1 | |
| B27024 | FIXTURE -0 SPRING, INSTL & REMOVAL, NEUT SHIFT | 1 | |
| B27024-1 | REMOVAL/INSTALLATION FIXTURE - NEUTRAL SHIFT ROD SPRING | 1 | |
| B27053 | FIXTURE -0 SPRING, INSTL & REMOVAL, NEUTRAL | 1 | |
| B27053-1 | FIXTURE - SPRING INSTALLATION AND REMOVAL, RUDDER NEUTRAL SHIFT ROD | 2 | |
| C107-08-0068 | PS VALVE REMOVAL FIXTURE | 1 | |
| C32034 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 2 | |
| C32034 -339 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 11 | |
| C32034-211 | REMOVAL / INSTALLATION FIXTURE-MLG | 4 | |
| C32034-227 | SPL-1869 Fixture - Transportation, Main Landing Gear, Removal/Installation | 11 | |
| C32034-273 | FIXTURE - TRANSPORT, MLG, REMOVAL/INSTALLATION | 6 | |
| C32034-33 | FIXTURE – TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 1 | |
| C32034-339 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 11 | |
| C32034-343 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 7 | |
| C32034-9 | FIXTURE, MAIN LANDING GEAR, INSTALLATION AND REMOVAL | 10 | |
| C956A7639G01 | FIXTURE, REMOVAL, OBTURATING FOR VFG | 1 | |
| CG9545401-0001 | SPECIAL FIXTUREAFT FAIRING REMOVAL INST | 1 | |
| D-16040 | Developed Bore Liner Removal Fixture | 1 | |
| D15657 | BEARING REMOVAL FIXTURE - LOWER BEARING HOUSING | 1 | |
| E13643 | AMPLIFIER REMOVAL FIXTURE | 1 | |
| EMB-00422-009 | Tire Removal Fixture | 1 | |
| F-16181 | BEARING REMOVAL FIXTURE | 1 | |
| FD0IAE-1P1604-3 | REMOVAL-INSTALATION FIXTURE | 1 | |
| FIG908 | BEARING CUP REMOVAL FROM SLEEVE FIXTURE | 1 | |
| G0100348 | MD-11 APU REMOVAL / INSTALL FIXTURE | 1 | |
| G601R324001-1 | DOLLY AND FIXTURE - WHEELS AND BRAKES REMOVAL / IN | 2 | |
| GS21370-1 | FIXTURE-REMOVAL | 1 | |
| IAE 1P16046 | REMOVAL/INSTALLATION FIXTURE | 3 | |
| IAE 1P16543 | IAE 1P16543 REMOVAL/INSTALLATION FIXTURE | 1 | |
| IAE1F10111 | FIXTURE, INSTALL./REMOVAL | 1 | |
| IAE1F10152 | IAE 1F10152 REMOVAL/INSTALLATION FIXTURE | 1 | |
| IAE1P16046 | REMOVAL/INSTALLATION FIXTURE | 3 | |
| IAE1P16543 | REMOVAL/INSTALLATION FIXTURE | 1 | |
| IAE1P17006 | FIXTURE, REMOVAL, INTERMEDIATE CASE, #3BRG HOUSING | 1 | |
| IAE1P17040 | FIXTURE, REMOVAL | 1 | |
| K55006-73 | TORQUE FIXTURE - VERTICAL FIN TENSION BOLT REMOVAL/INSTALLATION | 9 | |
| L-38156 | FIXTURE REMOVAL INTERMEDIATE CASE | 1 | |
| L-38870 | FIXTURE REMOVAL INTERMEDIATE CASE | 1 | |
| LAG-5877 | BEARING CUP REMOVAL FROM SLEEVE FIXTURE | 1 | |
| LTCT115 | HOLDING FIXTURE - NUT REMOVAL | 1 | |
| LTCT14491-01 | Fixture, Carrier Assembly, Shaft Removal/Installation | 1 | |
| LTCT7676-01 | Fixture, Pin, Removal | 1 | |
| MIT65B82106 | SPRING INSTALLATION AND REMOVAL FIXTURE - LOAD LIMITER, AILERON CONTROL | 1 | |
| OUT75 | FIXTURE-BODY REMOVAL / INSTALLATION | 7 | |
| PLFP-R | Pylon Load Fixture Pins removal tool | 1 | |
| PWA 87055 | FIXTURE, SUPPORT - FAN BLADE REMOVAL | 5 | |
| PWA-115396 | VFG REMOVAL/INSTALLATION LIFT FIXTURES (VFG) | 1 | |
| PWA102119 | INTERMEDIATE SCAVENGE TUBE REMOVAL FIXTURE | 1 | |
| PWA102120 | INTERMEDIATE PRESSURE TUBE REMOVAL FIXTURE | 1 | |
| PWA111017 | FIXTURE SUPPORT CONE SEGMENT REMOVAL | 3 | |
| PWA115396 | VFG REMOVAL/INSTALL SUPPORT FIXTURE | 1 | |
| PWA87055 | FIXTURE, SUPPORT - FAN BLADE REMOVAL | 5 | |
| PWA87055-1 | FIXTURE, SUPPORT - FAN BLADE REMOVAL | 1 | |
| PWC38088 | FIXTURE, LP DIFFUSER ASSEMBLY REMOVAL | 1 | |
| PWC56335 | FIXTURE, LP DIFFUSER ASSEMBLY REMOVAL | 1 | |
| PWC61790 | Fixture Removal inner Shroud | 1 | |
| PWC86227 | FIXTURE IBR FAN INSTALL AND REMOVAL | 1 | |
| RSE1030 | FIXTURE,EXHAUST PLUG REMOVAL | 1 | |
| RSE1078 | REMOVAL FIXTURE 5100 | 4 | |
| SPL-1869 | FIXTURE, MAIN LANDING GEAR, INSTALLATION AND REMOVAL | 1 | |
| SPL-5656 | FIXTURE-REMOVAL, ACCESSORY GEAR BOX MATING RINGS | 1 | |
| T-438959 | Fixture Bearing Removal | 1 | |
| T743806 | BEARING REMOVAL FIXTURE | 1 | |
| lC6978 | FIXTURE, INSTALL. & REMOVAL, HORIZ. - PWR TURB. | 1 | |
| page 9004 | Bearing Cup Removal from Sleeve Fixture | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
