| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| AUR-6.0MSS/35MWL | ROTATING | 1 | |
| AUR-6_0MSS/35MWL | ROTATING | 1 | |
| SEU-6.0-35 | ROTATING | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 350A94-2720-00 | ROTATING GRIP ADJUSTING TOOL | 1 | |
| 3-5290-T23 | DIAPHRAGM ASSEMBLY ROTATING TOOL | 1 | |
| (CALIB) ESC-1 /97845 | UNIWEST SCANNER - ESC-1 MINI ROTATING (CALIBRATION) | 1 | |
| 00166-305-000 | ROTATING WHEEL FOR HYDRAULIC JACK | 1 | |
| 076-321-035 | ROTATING PROBE, DIA 3/16 STAINLESS STEEL | 1 | |
| 076-321-039 | ROTATING PROBE, DIA 1/4 STAINLESS STEEL | 1 | |
| 076-321-043 | ROTATING PROBE, DIA 5/16 STAINLESS STEEL | 1 | |
| 076-321-047 | ROTATING PROBE, DIA 3/8 STAINLESS STEEL | 1 | |
| 076-321-049 | ROTATING PROBE, DIA 13/32 STAINLESS STEEL | 1 | |
| 076-321-055 | ROTATING PROBE, DIA 1/2 STAINLESS STEEL | 1 | |
| 08-2021-0000 | STAND, ENG ROTATING (BASE)(CE) | 3 | |
| 08-2021C0000 | Stand, Eng Rotating (Base)(Ce) | 5 | |
| 08-2023-0010 | Stand, Eng Rotating (Base) | 5 | |
| 0U146648 | ROTATING TABLE | 1 | |
| 1 SET | FLAT BOTTOM ROTATING PROBES(FOR OLYMPUS MINI MITE) | 1 | |
| 105-13101W3 | DISASSEMBLY/ASSEMBLY – ROTATING CONTROL ROD | 1 | |
| 109-3101-93-101 | MR ROTATING SCISSORS- UPPER LINK BUSHING REPLACE | 3 | |
| 109-3101-93-123 | M/R ROTATING SCISSOR TOOL SET | 1 | |
| 10C1350G01 | PULLER, SEAL- HPT REAR ROTATING SEAL | 1 | |
| 10C1400 | GAGE - NO 4 BEARING TO FWD ROTATING OIL SEAL | 1 | |
| 10C1400P01 | GAGE, NO. 4 BEARING TO FORWARD, ROTATING OIL SEAL, | 1 | |
| 10C2209G01 | Wrench-Rotating Seal | 1 | |
| 111863 | ROTATING UNIT PLAY MEASURING EQUIPMENT | 1 | |
| 11C3067 | FXTR - RTNR-NO 4 BRG INNER RACE/OIL SCOOP/ROTATING SEAL/FWD SEAL | 1 | |
| 11C3067G01 | Fxtr, rtnr-no 4 brg inner race/oil scoop/rotating seal/fwd seal | 1 | |
| 11C3114 | GRIND - ADAPTER - HP COMPR ROTOR-SEAL ROTATING | 1 | |
| 11C3114G04 | Grind,adapter-hp compr rotor-seal rotating | 1 | |
| 11C3114G05 | Grind,adapter-hp compr rotor-seal rotating | 1 | |
| 11C3139 | PULLER - ASSY - NO 4 BRG AFT ROTATING AIR SEAL | 1 | |
| 11C3139G01 | Puller,assy-No.4 brg aft rotating air seal | 1 | |
| 11C3166 | FIXTURE, I/R - SEAL ROTATING, NO. 1 BRG | 1 | |
| 11C3166G04 | Fixture install remove seal rotating no 1 bearing | 1 | |
| 11C3254 | SEATING - TOOL-SEAL - ROTATING - NO 3 BEARING | 1 | |
| 11C3254G01 | Seating,Tool-Seal,Rotating,NO 3 Bearing | 1 | |
| 11C3316G02 | Puller-No 3 Bearing, Rotating Seal | 1 | |
| 11C3497G01 | Fixture Restraining-No 5 Brg Outer Rotating Air Seal | 1 | |
| 11C4204G01 | Fixture,inspection/machining restraining,No.3 rotating seal | 1 | |
| 11C4215G01 | Fixture,restraining-seal,rotating,air,No 4 bearing | 1 | |
| 11C4229G01 | Fixture,restraining-seal rotating oil rear no 3 bearing | 1 | |
| 123T18 | PROBE ROTATING TOOL | 1 | |
| 146-221 | Mitutoyo 146-221 Non-Rotating Spindle Groove Micrometer 0-25mm | 1 | |
| 146-222 | Mitutoyo 146-222 Non-Rotating Spindle Groove Micrometer 0-25mm | 1 | |
| 146-223 | Mitutoyo 146-223 Non-Rotating Spindle Groove Micrometer 25-50mm | 1 | |
| 146-224 | Mitutoyo 146-224 Non-Rotating Spindle Groove Micrometer 50-75mm | 1 | |
| 146-225 | Mitutoyo 146-225 Non-Rotating Spindle Groove Micrometer 75-100mm | 1 | |
| 146-231 | Mitutoyo 146-231 Non-Rotating Spindle Groove Micrometer 0-1" | 1 | |
| 146-232 | Mitutoyo 146-232 Non-Rotating Spindle Groove Micrometer 0-1" | 1 | |
| 146-233 | Mitutoyo 146-233 Non-Rotating Spindle Groove Micrometer 1-2" | 1 | |
| 146-234 | Mitutoyo 146-234 Non-Rotating Spindle Groove Micrometer 2-3" | 1 | |
| 146-235 | Mitutoyo 146-235 Non-Rotating Spindle Groove Micrometer 3-4" | 1 | |
| 1523M35P01 | HPC CDP ROTATING REAR AIR SEAL | 1 | |
| 153-101 | Mitutoyo 153-101 Non-rotating Spindle Type Micrometer Head 15mm | 1 | |
| 153-201 | Mitutoyo 153-201 Non-rotating Spindle Type Micrometer Head 25mm | 1 | |
| 153-202 | Mitutoyo 153-202 Non-rotating Spindle Type Micrometer Head 25mm | 2 | |
| 153-205 | Mitutoyo 153-205 Non-rotating Spindle Type Micrometer Head 1" | 1 | |
| 153-206 | Mitutoyo 153-206 Non-rotating Spindle Type Micrometer Head 1" | 1 | |
| 169-201 | Mitutoyo 169-201 Non-Rotating Spindle Micrometer 0-25mm | 1 | |
| 169-201-10 | MITUTOYO 169-201 NON-ROTATING SPINDLE MICROMETER 0 | 1 | |
| 169-202 | Mitutoyo 169-202 Non-Rotating Spindle Micrometer 25-50mm | 1 | |
| 169-203 | Mitutoyo 169-203 Non-Rotating Spindle Micrometer 0-1" | 1 | |
| 169-204 | Mitutoyo 169-204 Non-Rotating Spindle Micrometer 1-2 | 1 | |
| 169-205 | Mitutoyo 169-205 Non-Rotating Spindle Micrometer 50-75mm | 1 | |
| 169-206 | Mitutoyo 169-206 Non-Rotating Spindle Micrometer 2-3" | 1 | |
| 169-207 | Mitutoyo 169-207 Non-Rotating Spindle Micrometer 75-100mm | 1 | |
| 169-208 | Mitutoyo 169-208 Non-Rotating Spindle Micrometer 3-4" | 1 | |
| 169A901-00 | ZES-SCN-ZM-5 HIGH SPEED ROTATING SCANNER KIT | 1 | |
| 17A8531G01 | ROTATING ADAPTOR | 1 | |
| 18C1019G01 | Fixture, Remove-Seal Rotating Aft N0 4Roller Brg & Aft Seal, Hpt | 1 | |
| 18C1506 | PUSHER - NO. 1 & 2 BEARINGS & NO. 1 ROTATING SEAL | 1 | |
| 18C1514 | PULLER - NO. 1 BRG. INNER RACE & ROTATING SEAL | 1 | |
| 1900183 | ROTATING GROUP AND ANGLE BLOCK ASSY. | 1 | |
| 197-101 | Mitutoyo 197-101 Non-rotating Spindle Micrometer Head 50mm | 1 | |
| 197-201 | Mitutoyo 197-201 Non-rotating Spindle Micrometer Head 2" | 1 | |
| 1AE1N20406 | ROTATING FIXTURE, INLET COWL | 1 | |
| 1AE1N20406 REV NC | ROTATING FIXTURE, INLET COWL | 1 | |
| 1C5691 | PULLER NO 6 BEARING INR RING & ROTATING OIL SEAL | 1 | |
| 1C5691 REV P | PULLER NO. 6 BEARING INNER RING & ROTATING OIL SEAL | 1 | |
| 1C5691G04 | Puller, No. 6R Bearing Inner Race and Rotating Oil Seal | 1 | |
| 1C5691REVP | PULLER NO. 6 BEARING INNER RING & ROTATING OIL SEA | 1 | |
| 1C6800 | PUSHER, ROTATING SEALS-O/S TRANSDUCER GEAR & BRG R | 1 | |
| 1C6800 REV T | PUSHER, ROTATING SEALS-O/S TRANSDUCER GEAR & BRG RACES- | 1 | |
| 1C6800G03 | Pusher,rotating seals-o/s transducer gear&brgraces lp turb rtr | 1 | |
| 1C6800G04 | Pusher,rotating seals-o/s transducer gear&brgraces lp turb rtr | 1 | |
| 1C6801 | PULLER, ROTATING SEALS & BEARING RACES-AFT SHAFT | 1 | |
| 2044M65P03 | ENGINE-AIR AND OIL ROTATING SEAL | 1 | |
| 2116M25P01 | SEAL ROTATING | 1 | |
| 213-01-651 | ROTATING TABLE | 1 | |
| 21C7082P07 | BRACKET,EYE,NONROTATING SHAFT | 1 | |
| 21C7237G01 | GRINDING FIXTURE, COMPRESSOR DISCHARGE ROTATING SEAL | 1 | |
| 2464M88P01 | SEAL, ROTATING, AIR AND OIL, NO. 4 BEARING, FORWAR | 1 | |
| 256377-2 | BEARING HALF SUPPORT, ROTATING ASSEMBLY | 1 | |
| 256377-9 | Rotating Assembly Balancing Support Insert | 1 | |
| 260019 | Anti-Rotating Clamp (for EZ-10,12,20 & 25) | 1 | |
| 260022 | Anti-Rotating Clamp (for EZ-30, 40 & 100) | 1 | |
| 260027 | Rotating Clamp (for EZ-10R & 12R Arms) | 1 | |
| 260030 | Rotating Clamp (for EZ-20R, 25R, 30R & 40R Arms) | 1 | |
| 2561618 | Cam Rotating | 1 | |
| 20662293 | ROTATING BRACKET | 1 | |
| 285167-19 | ROTATING GROUP SPACER ARBOR | 1 | |
| 285868-1-1 | HOLDER ALIGNMENT CHECKING ROTATING GROUP | 1 | |
| 285868-2-1 | ROTATING GROUP ASSEMBLY | 1 | |
| 287703-1 | HOLDER ROTATING ASSEMBLY | 1 | |
| 287704-1 | HOLDER ROTATING ASSEMBLY | 1 | |
| 289106-1 | HOLDER ROTATING GROUP HP | 1 | |
| 289905-1 | ROTATING ASSEMBLY BALANCING KIT | 1 | |
| 289905-1/-2 | ROTATING ASSEMBLY BALANCING KIT | 1 | |
| 289905-2 | ROTATING ASSEMBLY BALANCING KIT | 1 | |
| 289905-3 | ROTATING ASSEMBLY BALANCE KIT | 1 | |
| 289909-1 | ROTATING GROUP HOLDER | 1 | |
| 289909-2 | ROTATING GROUP HOLDER | 1 | |
| 291724-1 | ROTATING ASSEMBLY BALANCING SLEEVE BEARING | 1 | |
| 294886-1 | ROTATING GROUP HOLDER ASSEMBLY | 1 | |
| 294889-1 | ROTATING ASSY HOLDER | 1 | |
| 294891-1 | DRIVEN COMPRESSOR HOLDER ADAPTER (TO FIT SHAFT OF 294886-1 ROTATING ASSEMBLY HOLDER THAT WILL LOCATE THE INSIDE DIAMETER OF 3822075-2 MAIN SHAFT) | 1 | |
| 298026-1 | ROTATING GROUP BACK-UP FIXTURE | 1 | |
| 298128-1 | HP IMPELLER MEASURE- MENT ROTATING BASE | 1 | |
| 29901D | ROTATING BEACON | 1 | |
| 2C14062G01 | PULLER, NO.4B FORWARD INNER RACE AND ROTATING AIR/OIL SEAL | 1 | |
| 2C14667G02 | Pusher,No 4R&4B brg inner races/rotating air/oil seal | 1 | |
| 2C14669G01 | PULLER, NO. 4R BEARING INNER RACE, ROTATING AIR, OIL SEAL, AND NO. 4B BEARING | 3 | |
| 2C14669G02 | PULLER, NO. 4R BEARING INNER RACE, ROTATING AIR, OIL SEAL, AND NO. 4B BEARING FWD RACE ( PULLER ) | 1 | |
| 2C14824G02 | FIXTURE, INSTALL/REMOVE - ROTATING INTERSTAGE SEAL (REMOVAL FIXTURE) | 1 | |
| 2C14824G03 | FIXTURE, INSTALL/REMOVE - ROTATING INTERSTAGE SEAL (REMOVAL FIXTURE) | 1 | |
| 2C14824G04 | FIXTURE, INSTALL/REMOVE - ROTATING INTERSTAGE SEAL (REMOVAL FIXTURE) | 1 | |
| 2C14825 | FIXTURE, HPT FWD ROTATING AIR | 1 | |
| 2C14981 | FIXTURE, LIFT - ROTATING INTER | 1 | |
| 2C14981G01 | FIXTURE, LIFT - ROTATING INTERSTAGE SEAL | 1 | |
| 2C18096G01 | FIXTURE, INSTL - ROTATING INNER SEAL RETAINER | 1 | |
| 2C18129G01 | FIXTURE, LIFT - HPT ROTOR, FRONT ROTATING AIR SEAL (FIXTURE | 1 | |
| 2C6009 | PULLER, ADAPTER- NO 4 BRG ROTATING AIR & OIL SEAL | 2 | |
| 2C6049 | PULLER ADAPTER-ROTATING AIR | 1 | |
| 2C6049G01 | PULLER ADAPTER-ROTATING AIR | 1 | |
| 2C81413G02 | PULLER, HPT ROTOR NO. 4 OIL ROTATING SEAL | 1 | |
| 2C81422G01 | PROTECTIVE COVER, HPT ROTOR ROTATING | 1 | |
| 2C81539G01 | PULLER, WINDBACK ROTATING (WIN | 1 | |
| 2C81539G02 | PULLER, WINDBACK ROTATING | 1 | |
| 2C82025 | AGB CRANKING PAD ROTATING TOOL | 1 | |
| 3-5290-T23PM | TOOL-ROTATING,DIAPHRAGM ASSY | 1 | |
| 3-5290T23 | TOOL-ROTATING,DIAPHRAGM ASSY | 1 | |
| 3096AT2 | DRIVE SHAFT ROTATING FIXTURE | 1 | |
| 33A150 | TEST BLOCK, ROTATING PROBE | 1 | |
| 3403219-1 | PROP ROTATING TOOL | 1 | |
| 350A93-3311-00 | CLAMP BUSH ROTATING PITCH CHANGE SLIDER | 1 | |
| 350A93-3311-00/PHP | CLAMP BUSH ROTATING PITCH CHANGE SLIDER | 1 | |
| 350A93-3316-20 | ROTATING PLATE REPLACEMENT | 2 | |
| 350A93-3316-20/PHP | ROTATING PLATE REPLACEMENT | 1 | |
| 350A93-3320-00 | BEARING SEAL/NON-ROTATING SWASHPLATE INSERTIONTOOL | 1 | |
| 350A93-3323-00 | FIT. NON-ROTATING / ROTAT. SLEEVEL | 1 | |
| 350A93-3323-00/20 | FIT TOOL NON-ROTATING PITCH CHANGE PLAT | 1 | |
| 350A93-3323-00/PHP | FIT. NON-ROTATING / ROTAT. SLEEVEL | 1 | |
| 350A93-3324-00 | EXT. NON-ROTATING / ROTAT. SLEEVE | 1 | |
| 350A93-3324-00/PHP | EXT. NON-ROTATING / ROTAT. SLEEVE | 1 | |
| 350A93-3325-00 | BEARING SEAL/ NON-ROTATING SWASHPLATE EXTRACTIONTOOL | 1 | |
| 350A93-3710-00 | EXTRACTOR, ROTATING STAR | 3 | |
| 350A93-3710-00/PHP | TOOLS ROTATING STAR EXTRACTION | 1 | |
| 350A93-3710-01 | EXTRACTOR, ROTATING STAR | 1 | |
| 350A93-3710-22 | ROTATING STAR EXTRACTION TOOL | 1 | |
| 350A93-3712-00 | ASSEMBLY BLOCK, ROTATING STAR | 2 | |
| 350A93-3712-00/PHP | ASSEMBLY BLOCK, ROTATING STAR | 1 | |
| 350A93-3713-00 | ASSEMBLY BLOCK, NON-ROTATING STAR/ROTATING STAR | 2 | |
| 350A93-3713-00/PHP | ASSEMBLY BLOCK, NON-ROTATING STAR/ROTATING STAR | 1 | |
| 350A93-3804-00 | ROTATING STAR REPLACEMENT WRENCH | 2 | |
| 350A93-3806-00 | ROTATING STAR REPLACEMENT WRENCH | 2 | |
| 350A93331620 | WRENCH ROTATING STAR REPLACEMENT | 2 | |
| 350A93332400 | EXTRACTOR TOOL STAT/ROTATING PLATE | 1 | |
| 350A93371000 | TOOLS ROTATING STAR EXTRACTION | 3 | |
| 350A94-2720-00 | ROTATING GRIP ADJUSTING TOOL | 1 | |
| 350A94-2720-00/PHP | ROTATING GRIP ADJUSTING TOOL | 1 | |
| 35290.00 | ROTATING COUPLING 1/8'' BSP | 1 | |
| 365A93-31 11-01 | EXTRACTOR, ROTATING STAR BG | 1 | |
| 365A93-3111-00 | EXTRACTOR, ROTATING STAR BEARING | 1 | |
| 365A93-3111-01 | EXTRACTOR, ROTATING STAR BEARING | 1 | |
| 365A93-3111-01/PHP | EXTRACTOR ROTATING STAR BEARING | 1 | |
| 365A93-3111-25 | ROTATING STAR BEARING EXTRACTOR | 1 | |
| 365A93-3111-25/PHP | ROTATING STAR BEARING EXTRACTOR | 1 | |
| 365A93311000 | ROTATING STAR EXTRACTOR | 1 | |
| 365A93311101 | EXTRACTOR ROTATING STAR BEARING | 1 | |
| 365A93311200 | BEARING ASSEMBLY BLOCK ON ROTATING S | 1 | |
| 365A93311300 | ROTATING STAR ON NON ROT STAR ASSY B | 1 | |
| 369-350 | Mitutoyo 369-350 Digimatic Non-Rotating Spindle Disc Micrometer 0-25mm / 0-1" | 1 | |
| 369-351 | Mitutoyo 369-351 Digimatic Non-Rotating Spindle Disc Micrometer 25-50mm / 1-2" | 1 | |
| 369-352 | Mitutoyo 369-352 Digimatic Non-Rotating Spindle Disc Micrometer 50-75mm / 2-3" | 1 | |
| 369-353 | Mitutoyo 369-353 Digimatic Non-Rotating Spindle Disc Micrometer 75-100mm / 3-4" | 1 | |
| 3G6230A00332 | ROTATING SWASHPLATE | 1 | |
| 3G6230A00932 | BOTTOM ROTATING SCISSORS ASSY | 1 | |
| 3G6352A03212 | TOP ROTATING SCISSORS ASSY. | 1 | |
| 3G6705G00231 | TOOL KIT, M/R ROTATING CONTROL ADJUSTING | 1 | |
| 3G6705G00332 | TAIL ROTOR ROTATING CONTROLS ADJUSTING | 1 | |
| 3S6705G00332 | TOOL KIT, T/R ROTATING CONTROL ADJUSTIN | 1 | |
| 40-0210-5 | ROTATING RED BEACON NAVIGATION LIGHT ASSEMBLY | 1 | |
| 4013334-839G01 | PULLER - RING ADAPTER, ROTATING AIR SEAL, SPACER SEAL, AND BEARING NO. 5 INNER RACE (PULLER) | 1 | |
| 40A100-M | ROTATING E.C. PROBE DRIVE | 1 | |
| 40A100M | ROTATING E.C. PROBE DRIVE | 1 | |
| 445 SERIES | MICROMETER DEPTH GAGES WITH NON-ROTATING BLADES | 1 | |
| 50-047C6-32 | BOLT ROTATING RING | 1 | |
| 50-047C6-49 | BOLT ROTATING RING | 1 | |
| 8.6 | MINI ROTATING PROBES | 1 | |
| 834722 | Stand. Buil. Rotating Groups | 1 | |
| 834744 | Adapter, Lifting, Rotating Group | 1 | |
| 5008744 | ROTATING DISK | 1 | |
| 5013430 | DICK ROTATING | 4 | |
| 4133801011 | ROTATING MECH-TPIS,MLG | 1 | |
| 4611189524 | ROTATING GROUP SUPPORT | 1 | |
| 571114-01-11 | ROTATING PROBE | 1 | |
| 5837091-2 | ROTATING GROUP SUPPORT KIT | 1 | |
| 615P010F035 | ROTATING PROBE | 2 | |
| 615P010F051 | PROBE, ROTATING 5/32" DIA,DIFF 51.0MM | 1 | |
| 615P012 | ROTATING PROBE | 1 | |
| 615P012F035 | FASTENER HOLE PROBE - DIFFERENTIAL ROTATING METAL 4.8 MM (200 KHZ - 2 MHZ)(GE HOCKING P/N 615P012F035) | 2 | |
| 615P016 | ROTATING PROBE | 1 | |
| 615P016F035 | DYNAMIC ROTATING METAL PROBE EDDY CURRENT TOOLS | 2 | |
| 615P020 | ROTATING PROBE | 1 | |
| 615P020F035 | DYNAMIC ROTATING METAL 200KHZ-2MHZ 5/16 | 1 | |
| 615P024F035 | DYNAMIC ROTATING METAL 200KHZ-2MHZ 3/8 | 1 | |
| 615P032F035 | ROTATING PROBE HOCKING (SIZE 0.499INCHES&0.437 INCHES) | 1 | |
| 615P04F035 | DYNAMIC ROTATING METAL PROBE EDDY CURRENT TOOLS | 1 | |
| 620-546-008 | PROBE ROTATING 1/8 DIFFERENTIAL AJUSTAVEL - ESCAREADO. | 1 | |
| 620-546-156 | PROBE, ROTATING HOLE, REFLECTION TYPE, 200 KHZ TO 2 MHZ, 3/16”, 1/4”, AND 5/16” DIAMETER | 1 | |
| 62903-FH385-0000 | ACTUATOR ROTATING TOOL | 1 | |
| 640-030-040 | MINI DRIVE - ROTATING EC PROBE DRIVE UNIT | 4 | |
| 6891196 | PRESS - POWER TURBINE ROTATING | 1 | |
| 6893735 | DRIFT--COMPRESSOR REAR LABYRINTH ROTATING SEAL | 1 | |
| 6A5869 | REAR ROTATING SEAL | 1 | |
| 6F6230A00731 | ROTATING SCISSOR ASSY | 1 | |
| 6F6700G00133 | M/R ROTATING CONTROLS ADJUSTING (KIT) | 1 | |
| 6F6700G02531 | T/R ROTATING CONTROL ADJUST | 1 | |
| 6F6700G16131 | TOOL KIT, EP ROTATING CONTROLS ADJUST | 1 | |
| 70104-08021-041 | LINK,ROTARY WING ROTATING SCISSORS | 1 | |
| 81267100 | PLATE ROTATING | 1 | |
| 8243011020 | PROTECTOR ROTATING PARTS LINE | 1 | |
| 8243011330 | PROTECTOR ROTATING PARTS LINE | 1 | |
| 8243011550 | PROTECTOR ROTATING PARTS LINE | 1 | |
| 824744-1 | TURBINE ROTATING GROUP LIFT FIXTURE | 1 | |
| 83-292-02 | MLG ROTATING INTERFACE | 1 | |
| 833909-1 | STAND BRIDGE ROTATING GROUP | 1 | |
| 833944-1 | CART TRANSPORTATION, ROTATING GROUP | 1 | |
| 834050-1 | ADAPTER CENTERING ROTATING GROUP | 1 | |
| 834716-1 | TURBINE ROTATING GROUP STAND | 1 | |
| 834722-1 | STAND, BUILD, ROTATING | 1 | |
| 834744-1 | ROTATING GROUP | 1 | |
| 834857-1 | ROTATING GROUP SUPPORT | 1 | |
| 835279-1 | ROTATING ASSEMBLY RUN-OUT FIXTURE | 1 | |
| 835498-1 | Installer, Rotating Seal | 1 | |
| 8563392 | WRENCH, TORQUE – AFT ROTATING AIR/OIL SEPARATOR NUT (WRENCH) | 1 | |
| 85643011P01 | PLUG， PULLER - AFT ROTATING AIR/OIL SEAL | 1 | |
| 856A1046 | WRENCH #3 BRG ROTATING SEAL | 1 | |
| 856A1046 G01 | Wrench No. 3 Bearing ‐ Rotating Seal | 1 | |
| 856A1046G02 | WRENCH #3 BRG ROTATING SEAL | 1 | |
| 856A1046G03 | WRENCH #3 BRG ROTATING SEAL | 3 | |
| 856A1207G03 | ROTATING AIR SEAL HE | 1 | |
| 856A1207G04 | JACKET, HEATING-ROTATING AIR SEAL | 1 | |
| 856A1406G01 | HPT AFT Rotating seal puller | 1 | |
| 856A1479 | PULLER SEAL HPT AFT ROTATING | 1 | |
| 856A1479G01 | Puller, Seal - HP Turbine Rear Rotating Seal (seal puller) | 8 | |
| 856A2336 | PULLER FWD ROTATING AIR/OIL SEP | 1 | |
| 856A2336G01 | Puller Fwd Rotating | 1 | |
| 856A2336G02 | PULLER FWD ROTATING | 6 | |
| 856A2372G01 | SLEEVE, PROTECTION - REAR INNER ROTATING OIL SEAL | 2 | |
| 856A2375 | PULLER, HYDRAULIC-REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A2375G01 | PULLER, HYDRAULIC - REAR ROTATING AIR/OIL SEAL (PULLER) | 1 | |
| 856A2375G02 | PULLER REAR ROTATING | 1 | |
| 856A2377G01 | RING CENTER AFT ROTATING AIR S | 1 | |
| 856A2381 | PULLER- LPT STAGE 4 ROTATING AIR SEAL | 1 | |
| 856A2381G01 | PULLER-LPT.STAGE 4 ROTATING AIR SEAL | 2 | |
| 856A2385G01 | TOOL SET ASSEM./DISASSEM-LPT.CONICALROTOR SUPPORT ROTATING AIR SEAL | 1 | |
| 856A2386G01 | PULLER, HYDRAULIC - LPT FORWARD ROTATING AIR SEAL (PULLER) | 1 | |
| 856A2604 | PULLER, AFT ROTATING AIR-OIL SEPARATOR | 1 | |
| 856A2604 G01 | Puller ‐ Aft Rotating Air/Oil Separator | 1 | |
| 856A2604 REV A | PULLER, AFT ROTATING AIR-OIL SEPARATOR | 1 | |
| 856A2604G01 | PULLER AFT ROTATING | 1 | |
| 856A2661 | PULLER AFT ROTATING AIR/OIL | 3 | |
| 856A2661 G01 | Puller ‐ Aft Rotating Air/Oil Separator | 14 | |
| 856A2661G01 | PULLER - AFT ROTATING AIR/OIL | 14 | |
| 856A2661G02 | PULLER - AFT ROTATING AIR/OIL SEPARATOR (PULLER) | 1 | |
| 856A2661G03 | PULLER - AFT ROTATING AIR/OIL SEPARATOR (PULLER) | 1 | |
| 856A2693G02 | PULLER - AFT ROTATING AIR/OIL SEPARA | 4 | |
| 856A2721 | PULLER - ROTATING AIR SEAL AND STAGE 3 DISK (PULLER) | 1 | |
| 856A2721G01 | Puller - Rotating Air Seal and Stage 3 Disk (puller) | 5 | |
| 856A2764G01 | HEATER - LPT FWD ROTATING OIL SEAL | 2 | |
| 856A2764G02 | HEATER - LPT FWD ROTATING OIL SEAL | 1 | |
| 856A2764G03 | HEATER - LPT FWD ROTATING OIL SEAL | 1 | |
| 856A2764G04 | HEATER - LPT FWD ROTATING OIL SEAL | 2 | |
| 856A2764G05 | HEATER - LPT FWD ROTATING OIL SEAL | 4 | |
| 856A2764G06 | HEATER - LPT FWD ROTATING OIL SEAL | 2 | |
| 856A2789 | RING CENTER AFT ROTATING AIR SEAL | 1 | |
| 856A2789502 | RING CENTER AFT ROTATING AIR SEAL | 1 | |
| 856A2789G01 | RING, CENTERING ROTATING REAR AIR SEAL ON LPT SHAFT | 1 | |
| 856A2789G02 | Ring, Centering - Rear Rotating Air and Oil Seals on LPT Shaft (centering ring) | 6 | |
| 856A2943 | SLEEVE, PROTECTION - REAR INNER ROTATING AIR/OIL SEAL (PROTECTION SLEEVE) | 1 | |
| 856A2943 G01 | Sleeve Protection ‐ Rear Inner Rotating Air/Oil | 11 | |
| 856A2943G01 | SLEEVE, PROTECTION-REAR INNER ROTATING AIR/OIL SEAL | 11 | |
| 856A2985 | ROTATING WHEEL | 1 | |
| 856A2985G01 | FIXTURE, ROTATING WHEEL | 6 | |
| 856A3011 | PLUG, PULLER - AFT ROTATING AIR/OIL SEAL (PULLER PLUG) | 1 | |
| 856A3011 P01 | Plug Puller ‐ Aft Rotating Air/Oil Seal | 10 | |
| 856A3011P01 | Plug, Puller - Aft Rotating Air/Oil Seal (puller plug) | 10 | |
| 856A3014 | WRENCH FWD ROTATING AIR/OIL | 1 | |
| 856A3014G02 | WRENCH - FORWARD ROTATING AIR/OIL SEPARATOR NUT | 1 | |
| 856A3034 | PULLER ROTATING AIR/OIL SEPARATOR | 1 | |
| 856A3034 G04 | Puller Forward Rotating Air/Oil Separator | 2 | |
| 856A3034G01 | FWD ROTATING AIR/OIL SEP | 1 | |
| 856A3034G04 | FORWARD ROTATING AIR/OIL SEPARATOR PULLER | 2 | |
| 856A3034G05 | PULLER ROTATING AIR/OIL SEPARATOR | 3 | |
| 856A3062 | PULLER REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A3062 G02 | Puller Hydraulic ‐ Rear Rotating Air/Oil Sleeve | 7 | |
| 856A3062G01 | PULLER, HYDRAULIC - REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A3062G02 | Puller, Hydraulic - Rear Rotating Air/Oil Sleeve (puller) | 7 | |
| 856A3062G03 | PULLER REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A3063 | PULLER REAR ROTATING AIR SEAL | 1 | |
| 856A3063 G02 | Puller ‐ Rear Rotating Air Seal | 5 | |
| 856A3063G02 | PULLER - REAR ROTATING AIR SEAL | 5 | |
| 856A3114G01 | PLUG, PULLER - AFT ROTATING | 14 | |
| 856A3254G01 | wrench lp compressor aft blade retainer and fwd rotating air seal | 1 | |
| 856A3257 | PULL FWD ROTATING AIR SEAL LPT | 1 | |
| 856A3257 G01 | Puller ‐ Forward Rotating Air Seal LPT | 3 | |
| 856A3257G01 | PULLER-FORWARD ROTATING AIR SEAL LPT | 3 | |
| 856A3272 | PULL #4 BRG ROTATING OIL SEAL | 1 | |
| 856A3272 G01 | Puller ‐ No. 4 Bearing Forward Rotating Oil Seal | 5 | |
| 856A3272G01 | PULLER - 4 BEARING ROTATING OIL SEAL | 5 | |
| 856A3287 | FIXTURE, HOLDING - ROTATING AIR SEAL, BOLT HEADS (HOLDING FIXTURE) | 1 | |
| 856A3287G02 | HOLDING FIXTURE ROTATING AIR SEAL BOLT HEADS | 3 | |
| 856A3392 | WRENCH - TORQUE AFT ROTATING | 2 | |
| 856A3392 G01 | Wrench Torque ‐ Aft Rotating Air/Oil Separator | 19 | |
| 856A3392G01 | WRENCH TORQUE AFT ROTATING | 19 | |
| 856A3392G02 | TORQUE WRENCH - AFT ROTATING AIR/OIL SEPARATOR NUT | 1 | |
| 856A3416 | PULLER, ROTATING AIR SEAL - STAGE 3 | 1 | |
| 856A3416 G01 | Fixture Disassembly ‐ Rotating Air Seal | 3 | |
| 856A3416G01 | FIXTURE DISASSEMBLY ‐ ROTATING AIR SEAL | 3 | |
| 856A3570G03 | FORWARD ROTATING AIR/OIL SEPARATOR NUT WRENCH | 1 | |
| 856A3571 | WRENCH - FORWARD ROTATING AIR/OIL SEPARATOR NUT (WRENCH) | 1 | |
| 856A3571 G01 | Wrench ‐ Forward Rotating Air/Oil Separator Nut | 1 | |
| 856A3571G02 | Wrench - Forward Rotating Air / Oil Separator Nut | 13 | |
| 856A3582G01 | WRENCH, LPC AFT BLADE RETAINER AND FORWARD ROTATING AIR SEAL | 3 | |
| 856A3755P01 | TOOL, PROOF INSTALLATION - LPT STAGE 1 AND 2 ROTATING AIR SEAL | 6 | |
| 856A3870 | ADP ROTATING TGB | 1 | |
| 856A3870G01 | Adapter,rotating-tgb | 1 | |
| 856A4109G01 | RACK, ROTATING - CLEAN HPT BLADE | 1 | |
| 856A5638G01 | EDM FIXTURE - LPT FWD ROTATING AIR | 1 | |
| 856A5638G02 | EDM FIXTURE - LPT FWD ROTATING AIR SEAL | 1 | |
| 856A5641G04 | Fixture Weld And Machine Rear Rotating Air Seal Serrtions | 1 | |
| 856AI046 | WRENCH NO 3 BRG ROTATING SEAL | 1 | |
| 85S1047-001 | AGB ROTATING ADAPTER | 1 | |
| 9020207 | EDDY CURRENTROTATING SCANNER - RA-2000 | 1 | |
| 9020260 | MINI MITE EDDY CURRENT ROTATING SCANNER (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| 9020266 | ROTATING BOLTHOLE SCANNER MINIMITE 9020266 REV A | 1 | |
| 9209335 | TLCNTNR HSS ROTATING CUTTER | 1 | |
| 9216656 | ROTATING SCANNER STANDARD R/A KIT | 1 | |
| 9217153 | ROTATING SCANNER PROBE SPO-3564 | 1 | |
| 9217154 | ROTATING SCANNER PROBE SPO-3564 | 1 | |
| 9217155 | ROTATING SCANNER PROBE SPO-3564 | 1 | |
| 9217156 | ROTATING SCANNER PROBE SPO-3564 | 1 | |
| 9217157 | ROTATING PLASTIC PROBE 7.9 MM - 9.5 MM (0.312 IN. - 0.375 IN.)(OLYMPUS) | 1 | |
| 9218787 | ROTATING PROBE - RANGE 17,4 TO 19,0MM (38MM LENGHT) FOR LEMO CONNECTOR | 1 | |
| 9219979 | ROTATING SCANNER PRO | 1 | |
| 9219980 | ROTATING SCANNER PRO | 1 | |
| 9219981 | ROTATING SCANNER PRO | 1 | |
| 9219983 | FISHER CONNECTOR ROTATING EDDY CURRENT PROBE | 1 | |
| 9230061 | ROTATING SCANNER PRO | 1 | |
| 9230078 | ROTATING SCANNER PROBE SPO-3564 | 1 | |
| 9230784 | ROTATING PLASTIC PROBE 3.2 MM - 3.9 MM (0.125 IN. - 0.156 IN.)(OLYMPUS) | 1 | |
| 9543031 | DISK ROTATING | 1 | |
| 9744738 | MINIMITE FISCHER ROTATING SCANNER | 5 | |
| 87245015 | Rotating concr/plast hooks 150x85 150pcs | 1 | |
| 87245016 | Rotating concr/plast hooks 150x115 100pc | 1 | |
| 87245020 | Rotating concr/plast hooks 210x85 100pcs | 1 | |
| 87245022 | Rotating concr/plast hooks 340x160 50pcs | 1 | |
| 8812229000 | ROTATING JIG | 1 | |
| 8814118000 | ROTATING ASSY BLANK | 1 | |
| 895-3101-39-101 | TOOL SET, ROTATING HALF SCISSOR SPHERICAL BEARING REPLACEMENT | 1 | |
| 8C2022G01 | Fixture, rtnr - no 4 brg inner race/oil scoop/ rotating seal/fwd seal | 1 | |
| 8C2047G01 | fixture removal fwd rotating seal oil hptr | 1 | |
| 8C2060 | FIXTURE, CHILL - HPT AFT ROTATING SEAL | 1 | |
| 8C2509G02 | Fixture, Remove - Seal Rotating, No 1 Brg | 1 | |
| 8C2971G01 | Fixture Restraint-N1B Rotating Oil Seal | 1 | |
| 8C2975G01 | Fixture,restraint - N3B rotating seal | 1 | |
| 8C3159 | COOLER - SEAL - ROTATING LABY AIR NO5 BRG OUTER | 1 | |
| 8C3159G01 | Cooler-seal,rotating laby air No.5 BRG outer | 1 | |
| 8C3159P01 | Cooler-seal,rotating laby air No.5 BRG outer | 1 | |
| 8C3197 | FIXTURE - RESTRAINING - NO 5 BRG OUTERROTATING AIR SEAL | 1 | |
| 8G6700G00132 | TOOL KIT, M/R ROTATING CONTROLS ADJUSTING | 1 | |
| 8G6700G02732 | TOOL KIT, T/R ROTATING CONTROLS ADJUSTING | 1 | |
| 905628-1-1 | HOLDER ROTATING ASSEMBLY | 1 | |
| 91C02102 | SEAL, ROTATING ASSY | 1 | |
| 91C10301 | LEAP-1A SEAL ROTATING,ASSY | 1 | |
| 93024-05D P09A | Rotating Arm (P09A) | 1 | |
| 93024-05D P09B | Rotating Arm (P09B) | 1 | |
| 9560138390 | TEE, ROTATING | 1 | |
| 956A1031 | FIXTURE - RTNR-NO 4 BRG INNER RACE/OIL SCOOP/ROTATING SEAL/FWD SEAL | 1 | |
| 956A1037 | FIXTURE - RESTRAINING - FWD ROTATING OIL SEAL NO. 4 BEARING | 1 | |
| 956A1037G01 | Fixture,restraining-fwd rotating oil seal no 4 bearing | 1 | |
| 956A1037G02 | Fixture,restraining-fwd rotating oil seal no 4 bearing | 1 | |
| 956A1039 | PULLER - ASSY - NO. 4 BRG FWD ROTATING OIL SEAL | 1 | |
| 956A1805 | FIXTURE - RESTRAIN - SEAL ROTATING - OIL | 1 | |
| 956A1805G02 | ROTATING OIL SEAL RESTRAIN FIXTURE | 1 | |
| 956A1810 | FIXTURE - RESTRAINING - FWD OUTER SEAL - ROTATING | 1 | |
| 956A1810G01 | Fixture, restraining, fwd outer seal - rotating | 1 | |
| 956A1811 | FIXTURE - RESTRAIN - AFT ROTATING AIR SEAL - HPTR | 1 | |
| 956A1811G02 | Fixture,restrain-aft rotating air seal,hptr | 1 | |
| 956A3031 | FIXTURE - RTNR-NO 4 BRG INNER RACE/OIL SCOOP/ROTATING SEAL/FWD SEAL | 1 | |
| 956A3039 | PULLER - ASSEMBLY-NO. 4 BEARING FWD ROTATING OIL SEAL | 1 | |
| 956A3039G01 | Puller assembly no 4 bearing fwd rotating air seal | 1 | |
| 956A3504G01 | ffixture install remove seal rotating oil number 3 bearing | 1 | |
| 956A3805 | FIXTURE - RESTRAIN - AFT ROTATING OIL SEAL - NO 4 BRG | 1 | |
| 956A3805G01 | Fixture, Restrai-Aft Rotating Oil Seal,No 4 Brg | 1 | |
| 956A3811G01 | Fixture, Restrain - Aft Rotating Air Seal, Hptr | 1 | |
| 956A6201 | PUSHER/PULLER - ROTATING SEALS | 1 | |
| 956A6201G01 | PUSHER/PULLER - ROTATING SEALS | 6 | |
| 956A6303 | PROTECTOR-ROTATING SEAL BEARING NO. 4 | 1 | |
| 956A6304 | FIXTURE, RESTRAIN-ROTATING SEAL BEARING 4 | 1 | |
| 956A6304G01 | Fixture restrain rotating seal bearing 4 | 1 | |
| 956A6311 | FIXTURE - REMOVE - ROTATING SEAL BEARING 4 | 1 | |
| 956A6311G01 | Fixture remove rotating seal bearing 4 | 1 | |
| 956A6329 | KIT - HANDLING - LPT SPECIAL PROCEDURE ROTATING RING STG1 | 1 | |
| 956A6329G02 | Kit handling-rotating ring stg1 and disk1 | 1 | |
| 956A6339 | REMOVE - ROTATING SEAL BEARING 4 | 1 | |
| 956A6339G01 | Removal,seal rotating ring-bearing 4 | 1 | |
| 956A6515 | PULLER - LPT DISK STG 5 ROTATING SEAL RING | 1 | |
| 956A6515G02 | Fixture，puller-lpt，disk 5/rotating seal ring | 1 | |
| 956A6809 | WRENCH FOR THE SEAL ROTATING BEARING 1 | 1 | |
| 956A6812 | FIXTURE, CENTERING - FRONT ROTATING SEAL | 1 | |
| 956A6834 | FIXTURE ASSY/DIASSY - JOINT ROTATING SEAL | 1 | |
| 956A6834G01 | Fixture assy/diassy-joint rotating seal | 1 | |
| 956A6990G01 | PUSHER/PULLER - ROTATING SEALS | 2 | |
| 956A7306G01 | Dummy,installand check-ring rotating lpt | 1 | |
| 956A7658P85 | Braked rotating wheel | 1 | |
| 956A8302G02 | Fixture remove lpt assy rotating seals | 1 | |
| 956A8491P201 | Seal rotating front extraction collar | 1 | |
| 956A8518 | COVER - PROTECTOR - SEAL ROTATING | 1 | |
| 956A8900G01 | KIT - TOOL, AGB ROTATING SEAL | 7 | |
| 956A8901 | KIT - TOOL, ROTATING SEAL, AGB | 1 | |
| 9665936228 | ROTATING SEAL | 1 | |
| 97A28002117204 | SLEEVE-ROTATING | 1 | |
| 98F32203000000 | FITTING-ROTATING ROD R/I | 11 | |
| 98L28004002206 | SLEEVE ROTATING | 1 | |
| 98L28004003206 | SLEEVE ROTATING | 1 | |
| 98S27105005002 | ANTI ROTATING KEY | 8 | |
| 99A53003001100 | ROTATING PROBE CALIBRATION BLOCK (TITANIUM) | 4 | |
| 99A53003001102 | ROTATING PROBE CALIBRATION BLOCK (STEEL) | 5 | |
| 99F54503000000 | CALIBRATION BLOCK SHAFT-ADJUSTABLE MINI ROTATING PROBE | 2 | |
| 9C1441 | FIXTURE, RESTRAINING-NO 5 BRG OUTER ROTATING AIR SEAL | 1 | |
| 9C1605 | EXTRACTOR REAR ROTATING | 1 | |
| 9C1758 | REAR ROTATING ADAPTER | 1 | |
| 9C1758G01 | REAR ROTATING ADAPTOR | 1 | |
| 9C2122G03 | TORQUING/LOOSENING WRENCH ADAPTER - NUT SEAL ROTATING AIR | 1 | |
| 9C2154 | TOOL INSTALLATION - REAR ROTATING | 1 | |
| 9C2321 | TOOL - ROTATING SEAL, NO. 3 BR | 1 | |
| 9C2321G03 | Tool setting seal rotating no 3 bearing | 1 | |
| 9C2332 | PUSHER SEAL ROTATING NO 3 BRG | 1 | |
| 9C3009G01 | Puller-No 4 brg aft rotating oil seal | 1 | |
| 9C3067 | SUPERSEDED BY G02FIXTURE, RESTRAINING-NO 3 BEARING, ROTATING SEAL | 1 | |
| 9C3167 | PULLER-#4 BRG AFT ROTATING OIL SEAL | 1 | |
| 9C3167G01 | PULLER, NO.4 BEARING AFT ROTATING OIL SEAL (PULLER)(ALTERNATIVE TO 9C3009G01) | 1 | |
| A-77.02.1 | ROTATING PROBE ADAPTER (CONNECTOR OF 4 PIN FISHER - 1 END MALE, 1 END FEMALE) | 1 | |
| ACSU100-.120 | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. .120"Ø Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-.125 | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. .125"Ø Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-.156 | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. .156"Ø Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-.187 | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. .187"Ø Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-.187SS | STAINLESS STEEL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. .187"(4.74MM) Ø Includes Test Report and Certificate of Conformance | 1 | |
| ACSU100-.218 | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. .218"Ø Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-.250 | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. .250"Ø Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-.250/4WL | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. .250"Ø Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-11.0M | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. 11.0M(0.433")Ø Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-13.0M | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. 13.0M(0.512")Ø Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-15.0M | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. 15.0M(0.591")Ø Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-4.0M | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. 4.0M(.157")Ø Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-4.0MSS | STAINLESS STEEL UNIVERSAL ROTATING SCANNER PROBE 100 DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. 4.0M(.157")Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-4.1M | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. 4.1M(.161")Ø Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-4.35M-SS | STAINLESS STEEL UNIVERSAL ROTATING SCANNER PROBE 100 DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. 4.35M(.171")Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-5.0M | UNIVERSAL ROTATING SCANNER PROBE 100 DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. 5.0M(.197")Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-6.0M | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. 6.2M(.236")Ø Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-6.2M | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. 6.2M(.244")Ø Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-6.4M-SS | STAINLESS STEEL UNIVERSAL ROTATING SCANNER PROBE 100 DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. 6.4M(.252")Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-7.0M | UNIVERSAL ROTATING SCANNER PROBE 100 DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. 7.0M(.276")Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-9.0M | UNIVERSAL ROTATING SCANNER PROBE 100 DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. 9.0M(.354")Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5139 | CUSTOM ROTATING SCANNER PROBE 118-135 DEGREE DRILLED COUNTERSINK (.256"Ø)100KHZ-2MHZ. 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of conformance. | 1 | |
| AF-5336/2MHZ-1 | Fixed Diameter Solid Rotating Scanner Probe, Differential Reflection coil Configuration,1/8"Ø, 1-3MHz with a 2MHz Center Frequency, Unshielded, 1.75" Working Length Supplied with a 4 Pin Fischer Connector. Includes Test Report and Certificate of Conforman | 1 | |
| AF-5440-1 | Adjustable Rotating Scanner Probe, Adjustable from .125"-.156", 100KHz-2MHz 1.5" Working Length Supplied with a 4 Pin Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5440-2 | Adjustable Rotating Scanner Probe, Adjustable from .156"-.187", 100KHz-2MHz 1.5" Working Length Supplied with a 4 Pin Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5442 | SOLID ROTATING SCANNER PROBE 3.0"Ø DIAMETER,100KHz-2MHz , 2.0" WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFK-ARRY21 | Y Style Rotating scanner probe with 4 Pin Step Lemo(Rechii) Connector. Probe Kit for use with Mini scanners. Reflection D Coils. Contains 1 each of the following in a shipping / storage container, 21 Probes Total: ARRY-.125-.156/1.75WL, ARRY-.156-.187/1 | 1 | |
| AFK-AURY14 | Y-Type Rotating scanner probe with 4 Pin Fischer Connector. Probe Kit Contains 1 each of the following in a shipping / storage container, 14 Probes Total: AURY-.125-.156/1.75WL, AURY-.156-.187/1.75WL, AURY-.187-.218/1.75WL, AURY-.218-.250/2.0WL, AURY-.25 | 1 | |
| AFK-EC-BH16 | Boeing Part 6 51-00-00 Proceedure 16 Eddy Current Bolt Hole Inspection Kit. Includes 15 Universal Rotating Split End scanner probes Supplied with a with a Universal 4 Pin Fischer Connector and 1 Calibration Standard with hole sizes ranging from .187"Ø to | 1 | |
| AFNDT-3407AL | Aluminum Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), 1/2" (12.7), 9 | 1 | |
| AFNDT-3407SS | 17-4PH Stainless Steel Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), | 1 | |
| AFNDT-3407ST | 4340 Steel Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), 1/2" (12.7), | 1 | |
| AFNDT-3407TI | Titanium Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), 1/2" (12.7), 9 | 1 | |
| ARM0100007001901 | ROHMANN EXPANDABLE ROTATING PROBES | 2 | |
| ARM0100008001901 | ROHMANN EXPANDABLE ROTATING PROBES | 1 | |
| ARM0150011001901 | ROHMANN EXPANDABLE ROTATING PROBES | 1 | |
| ARM0200011001901 | ROHMANN EXPANDABLE ROTATING PROBES | 1 | |
| ARR | ROTATING PLASTIC PROBE 4.7 MM - 5.5 MM (0.187 IN. - 0.218 IN.)(OLYMPUS) | 1 | |
| ARR-.099SS | STAINLESS STEEL ROTATING SCANNER PROBE, 0.099Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL UNSHIELDED, 4 PIN STEP LEMO CONNECTOR. 1.1" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.125SS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE, .125"Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL UNSHIELDED, 4 PIN STEP LEMO CONNECTOR. 50MM(1.97") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.140SS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE, .125"Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL UNSHIELDED, 4 PIN STEP LEMO CONNECTOR. 50MM(1.97") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.156SE/1.1WL | ROTATING PLASTIC PROBE SERIES SPO-3564 RANGE OF HOLE SIZE 7.9 MM - 9.5 MM (0.312 IN. - 0.375 IN.) WORKING LENGTH 1.5 IN | 1 | |
| ARR-.156SS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE, .156"Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL UNSHIELDED, 4 PIN STEP LEMO CONNECTOR. 50MM(1.97") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.156SS/80MWL | STAINLESS STEEL ROTATING SCANNER PROBE, .156"Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL UNSHIELDED, 4 PIN STEP LEMO CONNECTOR. 80MM(3.15") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.171SS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE, .171"Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL UNSHIELDED, 4 PIN STEP LEMO CONNECTOR. 50MM(1.97") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.187SS/2.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN STEP LEMO CONNECTOR..HEAD DIAMETER: .187"(4.75mm), 2.0"(51mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.187SS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE, .187"Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL UNSHIELDED, 4 PIN STEP LEMO CONNECTOR. 50MM(1.97") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.187SS/80MWL | STAINLESS STEEL ROTATING SCANNER PROBE, .187"Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL UNSHIELDED, 4 PIN STEP LEMO CONNECTOR. 80MM(3.15") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.203SS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE, .203"Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL UNSHIELDED, 4 PIN STEP LEMO CONNECTOR. 50MM(1.97") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.203SS/80MWL | STAINLESS STEEL ROTATING SCANNER PROBE, .203"Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL UNSHIELDED, 4 PIN STEP LEMO CONNECTOR. 80MM(3.15") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.218SS/2WL | STAINLESS STEEL ROTATING SCANNER PROBE, .218"Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL SHIELDED, 4 PIN STEP LEMO CONNECTOR. 51MM(2.0") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.234SS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE, .234"Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL UNSHIELDED, 4 PIN STEP LEMO CONNECTOR. 50MM(1.97") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.250SE/1.1WL | ROTATING PLASTIC SCANNER 4-PIN LEMO PROBE (SPO-3564) | 1 | |
| ARR-.250SS/2.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN STEP LEMO CONNECTOR. HEAD DIAMETER: .250"(7.14mm), 2.0"(51mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.250SS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE, .250"Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL UNSHIELDED, 4 PIN STEP LEMO CONNECTOR. 50MM(1.97") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.265SS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE, .265"Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL UNSHIELDED, 4 PIN STEP LEMO CONNECTOR. 50MM(1.97") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.281SE/1.5WL | ROTATING SCANNER PROBE SPO-3564 | 1 | |
| ARR-.281SS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE, .281"Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL UNSHIELDED, 4 PIN STEP LEMO CONNECTOR. 50MM(1.97") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.296SS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE, .265"Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL UNSHIELDED, 4 PIN STEP LEMO CONNECTOR. 50MM(1.97") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.312 | ROTATING SCANNER PROBE SHIELDED 4 PIN STEP LEMO CONNECTOR 100K-2MHZ 2.0" WORKING LENGTH, SPLIT END EXPANDABLE. 5/16"Ø Includes Test Report and Certificate of Conformance | 1 | |
| ARR-.312SS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE, .312"Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL UNSHIELDED, 4 PIN STEP LEMO CONNECTOR. 50MM(1.97") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.375SE/1.5WL | ROTATING PLASTIC SCANNER 4-PIN LEMO PROBE (SPO-3564) | 1 | |
| ARR-.406SS/1.5WL | STAINLESS STEEL ROTATING SCANNER PROBE,.406"Ø, 100KHZ-2MHZ SHIELDED, 1.5" WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. USED WITH THE OLYMPUS RECHII RA SCANNER. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.500 | ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, 2.0" WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| ARR-.500SE/1.5WL | ROTATING PLASTIC SCANNER 4-PIN LEMO PROBE (SPO-3564) | 1 | |
| ARR-.625SE/1.5WL | ROTATING PLASTIC SCANNER 4-PIN LEMO PROBE (SPO-3564) | 1 | |
| ARR-1.98MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ, 4 PIN STEP LEMO CONNECTOR, 35MM(1.50") WORKING LENGTH, 1.98MM(0.078")Ø HEAD. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-2.38MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ, 4 PIN STEP LEMO CONNECTOR, 35MM(1.50") WORKING LENGTH, 2.38MM(0.0937")Ø HEAD. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-2.78MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ, 4 PIN STEP LEMO CONNECTOR, 35MM(1.50") WORKING LENGTH, 2.78MM(0.109")Ø HEAD. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-25.40MSE/2WL | ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, SPLIT END, 2.0" WORKING LENGTH, 4 PIN STEP LEMO, BOLT HOLE SIZE RANGE 25.40mm(1.000")Ø - 27.22mm(1.075")Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-5.0MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 5.0mm"Ø, 100KHz-2MHz , SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. 50mm(1.97") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-5.5MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 5.5mm"Ø, 100KHz-2MHz , SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. 50mm(1.97") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-6.0MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 6.0mm"Ø, 100KHz-2MHz , SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. 50mm(1.97") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-7.5MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 7.5mm"Ø, 100KHz-2MHz , SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. 50mm(1.97") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.125SS | RECHII STAINLESS STEEL ROTATING SCANNER PROBE, .125"Ø USED WITH RA 2000 SCANNER. 1.1" WOIRKING LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.140SS | ROTATING PROBE 0.14 INCH | 1 | |
| ARR.156SS | RECHII STAINLESS STEEL ROTATING SCANNER PROBE, .156"Ø USED WITH RA 2000 SCANNER. 1.1" WOIRKING LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.203SS/80MWL | STAINLESS STEEL ROTATING SCANNER PROBE, .203"Ø 100KHz-2MHz REFLECTION / DIFFERENTIAL UNSHIELDED, 4 PIN STEP LEMO CONNECTOR. 50MM(1.97") WORKING LENGTH. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.218SS | RECHII STAINLESS STEEL ROTATING SCANNER PROBE, .218"Ø USED WITH RA 2000 SCANNER. 1.1" WOIRKING LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. of Conformance | 1 | |
| ARR.250SE/1.1WL | ROTATING PLASTIC SCANNER 4-PIN LEMO PROBE (SPO-3564) | 1 | |
| ARR.250SS | RECHII STAINLESS STEEL ROTATING SCANNER PROBE, .250"Ø USED WITH RA 2000 SCANNER. 1.1" WOIRKING LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.281SS | ROTATING SCANNER STAINLESS STEEL PROBE 0.281 IN | 1 | |
| ARR.312 | RECHII STAINLESS STEEL ROTATING SCANNER PROBE, .312"Ø USED WITH RA 2000 SCANNER. 3.0" OVERALL LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.375SS | RECHII STAINLESS STEEL ROTATING SCANNER PROBE, .312"Ø USED WITH RA 2000 SCANNER. 3.0" OVERALL LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.437SS | ROTATING SCANNER STAINLESS STEEL PROBE 0.437 IN | 1 | |
| ARR.437SS/3WL | RECHII STAINLESS STEEL ROTATING SCANNER PROBE, .437"Ø USED WITH RA 2000 SCANNER. 3.0" OVERALL LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.500SS | RECHII STAINLESS STEEL ROTATING SCANNER PROBE, .500"Ø USED WITH RA 2000 SCANNER. 3.0" OVERALL LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.625SS | ROTATING SCANNER STAINLESS STEEL PROBE 0.625 IN | 1 | |
| ARRCS100-.156SS/1.5WL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK (5/32")100KHz-2MHz, 4 PIN STEP LEMO CONNECTOR,1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance .. | 1 | |
| ARRCS100-.187SS/1.5WL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK (3/16")100KHz-2MHz, 4 PIN STEP LEMO CONNECTOR,1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance | 1 | |
| ARRY-5.5-7M/50MWL | ADJUSTABLE "Y" ROTATING SCANNER PROBE 100KHz-2MHz SUPPLIED 4 PIN STEP LEMO CONNECTOR 50mm WORKING LENGTH. EXPANDABLE FROM 5.5-7.0mmØ. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRY-7-8.5M/50MWL | ADJUSTABLE "Y" ROTATING SCANNER PROBE 100KHz-2MHz SUPPLIED 4 PIN STEP LEMO CONNECTOR 50mm WORKING LENGTH. EXPANDABLE FROM 7.0-8.5mmØ. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRY-8.5-10M/50MWL | ADJUSTABLE "Y" ROTATING SCANNER PROBE 100KHz-2MHz SUPPLIED 4 PIN STEP LEMO CONNECTOR 50mm WORKING LENGTH. EXPANDABLE FROM 8.5-10.0mmØ. Includes Test Report and Certificate of Conformance. | 1 | |
| ARTPX-008 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.375in (10mm); Tube ID: 0.375-0.437in (9.53-11.1mm); Coil: 1000= 100-2000 kHz; Poly ... | 1 | |
| ARTPX-029 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.750in (19mm); Tube ID: 0.750-0.875in (19.05-22.23mm); Coil: 1000= 100-2000 kHz; Pol... | 1 | |
| ARTPX-030 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.875in (22mm); Tube ID: 0.875-1.000in (22.23-25.4mm); Coil: 1000= 100-2000 kHz; Poly... | 1 | |
| AT192B | ROTATING HEAD AIR SAW HD | 1 | |
| ATB005 | TEST BLOCK, ROTATING PROBE | 1 | |
| AUR | ROTATING PROBE | 1 | |
| AUR-.083SS/3.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .083"(2.11mm)Ø, 76.2mm(3.0") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.093SS/55MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, HEAD DIAMETER = .093"Ø(2.36mm), (2.16")55mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AUR-.099SS/3.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .099"(2.51mm)Ø, 76.2mm(3.0") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.115SS/3.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .115"(2.92mm)Ø, 76.2mm(3.0") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.125SS/1.1WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .125"(3.175mm)Ø, 27.94mm(1.1") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.156SE/1.75WL | ROTATING SCANNER PRO | 1 | |
| AUR-.156SS/1.75WL | ROTATING SCANNER PROBE 100KHZ-2MHZ | 1 | |
| AUR-.156SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .156"(3.96mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.156SS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE | 1 | |
| AUR-.171SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .1719"(4.37mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.185SS/15MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED. HEAD DIAMETER: .185"Ø(4.70mm), 15mm(.591") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.187SE/1.75WL | ROTATING SCANNER PRO | 1 | |
| AUR-.187SS/1.75WL | ROTATING SCANNER PROBE 100KHZ-2MHZ | 1 | |
| AUR-.187SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .187"(4.75mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.203SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .203"(5.16mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.218SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .21875"(5.54mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.234SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .234"(5.94mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.247SS/15MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED. HEAD DIAMETER: .247"Ø(6.27mm), 15mm(.591") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.250SS/1.75WL | ROTATING SCANNER PROBE 100KHZ-2MHZ | 1 | |
| AUR-.250SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .250"(6.35mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.281SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .281"(7.14mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.312SS/1.75WL | ROTATING SCANNER PROBE 100KHZ-2MHZ | 1 | |
| AUR-.312SS/3WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .312"Ø(7.92mm), (3.0")76.2mm WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.312SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .312"(7.92mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.359SS/51MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHZz SHIELDED, .359"(9.12mm)Ø, 2.0"( 51mm) WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.562SS/65MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .562"(14.27mm) 65mm WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.625SS/65MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, 4 PIN FISCHER CONNECTOR. PROBE DIAMETER: .625"Ø (5/8")(15.90mm) WITH A 2.56"(65mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.687SS/75MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .687" (11/16") 2.95"(75mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.750/2.0WL | ROTATING SCANNER PROBE, .750"Ø, 100KHz-2MHz SHIELDED, 2.0" WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-10.0MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz ,.394"(10.0mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38"(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-10.2MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 10.2mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance | 1 | |
| AUR-10.7MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 10.7mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance | 1 | |
| AUR-10.8MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz ,.425"(10.8mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38"(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-10.8MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz ,.425"(10.8mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.97"(50mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-11.0MSS/35MWL | ROTATING SCANNER STAILESS | 1 | |
| AUR-11.7MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .461"Ø(11.7mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-12.0M/SE/51MWL | ROTATING SCANNER PROBE 100KHz-2MHz, 12-15mm Ø, SPLIT END SUPPLIED WITH A 4 PIN FISHER CONNECTOR, 51mm(2.0") WORKING LENGTH. Includes Test Report and Certificate of conformance. | 1 | |
| AUR-12.0MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz ,.472"(12.0mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38"(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-12.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .472"Ø(12.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-12.0MSS/82MWL-1 | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 50KHz-2.5MHz SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .472"Ø(12.00mm), 3.22"(82mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-12.6MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, 12.6mmØ DIAMETER, 35mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-12.9MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, 12.9mmØ DIAMETER, 35mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-13.0MSS/35MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .512"Ø(13.0mm), 1.38"(35mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-13.0MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .512"Ø(13.0mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-13.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .512"Ø(13.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-13.1MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 13.1mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance | 1 | |
| AUR-13.3MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, 13.3mmØ(.524") DIAMETER, 35mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-13.4MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .528"Ø(13.4mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-13.5MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 13.5mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance | 1 | |
| AUR-13.8MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .543"Ø(13.8mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-13.9MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 13.9mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance | 1 | |
| AUR-14.0MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .551"Ø(14.0mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-14.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .551"Ø(14.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-14.2MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, 14.2mmØ DIAMETER, 35mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-14.4MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .567"Ø(14.4mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-14.6MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 14.6mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-15.0MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz ,.591"(15.0mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38"(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-15.0MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .591"Ø(15.0mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-15.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .591"Ø(15.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-15.1MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 15.1mmØ(.594") DIAMETER, 35mm(1.38") WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-15.1MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 15.1mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-15.4MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .606"Ø(15.4mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-15.5MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 15.5mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-15.6MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .614"Ø(15.6mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-15.8MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 15.8mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-15_1MSS/35MWL | ROTATING SCANNER | 1 | |
| AUR-16.0MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz ,.530"(16.0mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38"(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-16.0MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .630"Ø(16.0mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-16.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .630"Ø(16.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-16.1MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .634"Ø(16.1mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-16.2MSS/35MWL | ROTATING SCANNER | 1 | |
| AUR-16.2MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 16.2mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-16.3MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .642"Ø(16.3mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-16.6MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE, 16.6mmØ DIAMETER, 100KHz-2MHz, 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-16.9MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .665"Ø(16.9mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-17.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .669"Ø(17.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-17.1MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ ,.673"(17.1mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38""(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-17_1MSS/35MWL | ROTATING SCANNER STAINESS STEEL | 1 | |
| AUR-18.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .709"Ø(18.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-18.3MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ ,.720"(18.3mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38"(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-19.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .748"Ø(19.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-19.1MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ ,.752"(19.1mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38"(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-19_1MSS/35MWL | ROTATING SCANNER STAINLESS | 1 | |
| AUR-2.3MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ ,.0906"(2.3mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38"(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-20.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .787"Ø(20.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-20.2MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ ,.795"(20.2mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38"(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-21.0MSS/35MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .827"Ø(21.00mm), 1.38"(35mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-21.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .827"Ø(21.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-21_0MSS/35MWL | ROTATING SCANNER | 1 | |
| AUR-22.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .866"Ø(22.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-22.2MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ ,.874"(22.2mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38"(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-22.6MSS/51MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR.57/64"Ø (22.61mm) DIAMETER HEAD.Includes Test Report and Certificate of Conformance... | 1 | |
| AUR-22.6MSS/65MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ ,.890"(22.6mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 2.56"(65mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-23.0MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ ,.906"(23.0mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38"(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-23.0MSS/65MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ ,.906"(23.0mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 2.56"(65mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-24.0MSS/65MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ ,.945"(24.0mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 2.56"(65mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-24.2MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ ,.953"(24.2mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38"(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-24_2MSS/35MWL | ROTATING SCANNER | 1 | |
| AUR-25.0MSS/35MWL | ROTATING SCANNER | 1 | |
| AUR-25.0MSS/65MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ ,.984"(25.0mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 2.56"(65mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-3.0MSS/35MWL | ROTATING SCANNER | 1 | |
| AUR-3.8MSS/35MWL-1 | STAINLESS STEEL ROTATING SCANNER PROBE 50KHz-2.5MHz, 3.8mmØ(.1496") SHIELDED, 35mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-3.96MSS/55MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE, 3.96MM(5/32")100KHz-2MHz, 55MM(2.17") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-3.9MSS/125MWL | ROTATING PROBE | 1 | |
| AUR-3.9MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ ,.156"(3.9mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38"(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-3.9MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE | 1 | |
| AUR-3_0MSS/35MWL | ROTATING SCANNER | 1 | |
| AUR-3_9MSS/35MWL | PROBE ROTATING SCANNER NDT | 1 | |
| AUR-4.0MSS/35MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .157"Ø(4.00mm), 1.38"(35mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-4.2MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .165"Ø(4.20mm), 50mm WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-4.4MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED WITH A 4 PIN FISCHER CONNECTOR, 4.4mmØ HEAD, 50mm WORKING LENGTH. Includes Test Report and Certificate of Conformance.. | 1 | |
| AUR-4.6MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ, .181"(4.6mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38"(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-4.75MSS/55MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE, 4.75MM (3/16"),100KHz-2MHz, 55MM(2.17") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-4.9MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .192"Ø(4.90mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-5.0MSS/35MWL | ROTATING SCANNER | 1 | |
| AUR-5.0MSS/82MWL-1 | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 50KHz-2.5MHz SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: 5.00mm (.197"Ø), 82mm (3.22") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-5.53MSS/55MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE, 5.53MM (7/32"),100KHz-2MHz, 55MM(2.17") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-5.6MSS/51MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .220"Ø(5.60mm), 2.0"(51mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 or Ether ARD002 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-6.1MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ, .240"(6.1mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38"(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-6.2MSS/35MWL-1 | STAINLESS STEEL ROTATING SCANNER PROBE 50KHz-2.5MHz, 6.2mmØ(.244") SHIELDED, 35mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-6.35MSS/55MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE, 6.35MM (1/4"),100KHz-2MHz, 55MM(2.17") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-6.8MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ ,.268"(6.8mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.97"(50mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-7.0MSS/35MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .276"Ø(7.00mm), 1.38"(35mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificat... | 1 | |
| AUR-7.2MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz ,.283"(7.3mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38"(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-7.2MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz ,.283"(7.3mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.97"(50mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-7.6MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz, SHIELDED WITH A 4 PIN FISCHER CONNECTOR, 35mm WORKING LENGTH 7.6mmØ(.299") HEAD SIZE. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-7.6MSS/35MWL-1 | STAINLESS STEEL ROTATING SCANNER PROBE, 50KHz-2.5MHz,7.6mmØ(.299") SHIELDED, 35mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-7.6MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz, SHIELDED WITH A 4 PIN FISCHER CONNECTOR, 50mm WORKING LENGTH 7.6mmØ(.299") HEAD SIZE. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-7.9MSS/35MWL | ROTATING SCANN ER | 1 | |
| AUR-7.9MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE | 1 | |
| AUR-8.4MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz, SHIELDED WITH A 4 PIN FISCHER CONNECTOR, 50mm WORKING LENGTH 8.4mmØ(.331") HEAD SIZE. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-8.8MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz ,.346"(8.8mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.38"(35mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-8.8MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz ,.346"(8.8mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.97"(50mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-9.2MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz ,.362"(9.2mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.97"(50mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-9.6MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz ,.378"(9.6mm)Ø, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 1.97"(50mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-9.9MSS/35MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .390"Ø(9.9mm), 35mm(1.38") WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-9.9MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .390"Ø(9.9mm), 50mm WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR.156 | ROTATING SCANNER PROBE 100KHZ 2MHZ 4 PIN FISHER | 1 | |
| AUR125SS35MWL | ROTATING SCANNER PROBE | 1 | |
| AUR187SS35MWL | ROTATING SCANNER PROBE | 1 | |
| AURCB-.156SS/1.5WL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER COUNTERBORE PROBE FOR SURFACE INSPECTION, (5/32" - 3/16")100KHz-2MHz, 4 PIN FISCHER CONNECTOR,1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCB-.187SS/1.5WL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER COUNTERBORE PROBE FOR SURFACE INSPECTION, (3/16" - 7/32")100KHz-2MHz, 4 PIN FISCHER CONNECTOR,1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-.343SS | STAINLESS STEEL ROTATING SCANNER PROBE 100 DEGREES COUNTERSINK .343"Ø(11/32")100KHz-2MHz SUPPLIED WITH A 4 PIN FISCHER CONNECTOR Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-10.3MSS/50MWL | STAINLESS STEEL100° COUNTER SINK ROTATING SCANNER PROBE, 100KHz-2MHz, 10.3mmØ WITH A 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-11.5MSS/50MWL | STAINLESS STEEL100° COUNTER SINK ROTATING SCANNER PROBE, 100KHz-2MHz, 11.5mmØ WITH A 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-12.7MSS/50MWL | STAINLESS STEEL100° COUNTER SINK ROTATING SCANNER PROBE, 100KHz-2MHz, 12.7mmØ WITH A 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-13.5MSS/50MWL | STAINLESS STEEL100° COUNTER SINK ROTATING SCANNER PROBE, 100KHz-2MHz, 13.5mmØ WITH A 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-3.96MSS/30MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 3.96MM(5/32")100KHz-2MHz, 30MM(1.18") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-3.96MSS/60MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 3.96MM(5/32")100KHz-2MHz, 60MM(2.36") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-4.4MSS/50MWL | STAINLESS STEEL100° COUNTER SINK ROTATING SCANNER PROBE, 100KHz-2MHz, 4.4mmØ WITH A 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-4.75MSS/30MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK, 4.75MM (3/16"),100KHz-2MHz, 30MM(1.18") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-4.75MSS/60MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK, 4.75MM (3/16"),100KHz-2MHz, 60MM(2.36") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-5.53MSS/30MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK, 5.53MM (7/32"),100KHz-2MHz, 30MM(1.18") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-5.53MSS/60MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK, 5.53MM (7/32"),100KHz-2MHz, 60MM(2.36") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-6.35MSS/30MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK, 6.35MM (1/4"),100KHz-2MHz, 30MM(1.18") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-6.35MSS/50MWL | STAINLESS STEEL100° COUNTER SINK ROTATING SCANNER PROBE, 100KHz-2MHz, 6.35mmØ WITH A 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-6.35MSS/60MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK, 6.35MM (1/4"),100KHz-2MHz, 60MM(2.36") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-9.9MSS/50MWL | STAINLESS STEEL100° COUNTER SINK ROTATING SCANNER PROBE, 100KHz-2MHz, 9.9mmØ WITH A 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCSF100-.312 | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK, .312"Ø(8.0MM), 100KHZ-2MHZ SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. | 1 | |
| AURCSF100-.375 | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK, .375"Ø(9.5MM), 100KHZ-2MHZ SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. | 1 | |
| AURF-.375SS/2.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 200KHz-2MHz FERRITE SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .375"(9.5mm)Ø, 2.0"(51mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB-.324SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING SCANNER PROBE, .324"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.343SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .343"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.406SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .406"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.437SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .437"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.468SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .468"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.500SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .500"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.531SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .531"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.562SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .562"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-13MSS/12.7MWL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, 13MMØ(.512"), 100KHz-2MHz, 12.7MM(.500") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-15MSS/12.7MWL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, 15MMØ(.591"), 100KHz-2MHz, 12.7MM(.500") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-187SE/2WL | ET FLAT BOTTOM ROTATING PROBE SIZE 3/16 | 1 | |
| AURFB-250SE/2WL | ET FLAT BOTTOM ROTATING PROBE SIZE 1/4 | 1 | |
| AURFB-375SE/2WL | ET FLAT BOTTOM ROTATING PROBE SIZE 3/8 | 1 | |
| AURY-12-15MM/50MWL | SHAFT-ADJUSTABLE MINI ROTATING PROBE | 1 | |
| AURY-4.0-4.8M/45MWL | Adjustable "y" rotating scanner probe | 1 | |
| AURY-4.8-5.5M/45MWL | Adjustable Y Rotating Scanner Probe | 1 | |
| AURY-5.0-6.0MM/60MWL | ADJUSTABLE ROTATING SCANNER PROBE 100KHz-2MHz, EXPANDABLE FROM 5.0-6.0mmØ, 60mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-5.5-7M/50MWL | ADJUSTABLE "Y" ROTATING SCANNER PROBE 100KHz-2MHz SUPPLIED 4 PIN FISCHER CONNECTOR 50mm WORKING LENGTH. EXPANDABLE FROM 5.5-7.0mmØ. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-5.5M/45MWL | ADJUSTABLE ROTATING SCANNER YPROBE | 1 | |
| AURY-6.0-7.0MM/50MWL | ROTATING PROBE ADJUSTABLE ROTATING SCANNER PROBE 100KHZ-2MHZ 4 PI | 1 | |
| AURY-6.0-7.0MM/60MWL | ADJUSTABLE ROTATING SCANNER PROBE 100KHz-2MHz, EXPANDABLE FROM 6.0-7.0mmØ, 60mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-7-8.5M/50MWL | ADJUSTABLE "Y" ROTATING SCANNER PROBE 100KHz-2MHz SUPPLIED 4 PIN FISCHER CONNECTOR 50mm WORKING LENGTH. EXPANDABLE FROM 7.0-8.5mmØ. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-7.0-8.5MM/55MWL | ADJUSTABLE ROTATING SCANNER PROBE 100KHz-2MHz, EXPANDABLE FROM 7.0-8.5mmØ, 55mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-8.5-10.5MM/60MWL | ADJUSTABLE ROTATING SCANNER PROBE 100KHz-2MHz, EXPANDABLE FROM 8.5-10.5mmØ, 60mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-8.5-10M/50MWL | ADJUSTABLE "Y" ROTATING SCANNER PROBE 100KHz-2MHz SUPPLIED 4 PIN FISCHER CONNECTOR 50mm WORKING LENGTH. EXPANDABLE FROM 8.5-10.0mmØ. Includes Test Report and Certificate of Conformance. | 1 | |
| B588 | UNIT, ROTATING PROBE | 1 | |
| B809-2122 | ROTATING RECTIFIER ASSEMBLY | 1 | |
| BAT-XBH12 | 12" ROTATING GRIP BIT HOLDER / EXTENSION - Holds 1/4" Hex Bits | 1 | |
| BAT-XBH18 | 18" ROTATING GRIP BIT HOLDER / EXTENSION - Holds 1/4" Hex Bits | 1 | |
| BAT-XBH2 | 2-1/2" ROTATING GRIP BIT HOLDER / EXTENSION - Holds 1/4" Hex Bits | 1 | |
| BAT-XBH6 | 6" ROTATING GRIP BIT HOLDER / EXTENSION - Holds 1/4" Hex Bits | 1 | |
| BPRA-10-SS | ROTATING SCANNER STAINLESS STEEL PROBE 0.156 IN | 1 | |
| BPRA-11-SS | ROTATING PROBE 0.171 INCH | 1 | |
| BPRA-12-SS | ROTATING SCANNER STAINLESS STEEL PROBE 0.187 IN | 1 | |
| BPRA-14-SS | ROTATING SCANNER STAINLESS STEEL PROBE 0.218 IN. | 1 | |
| BPRA-16-SS | ROTATING SCANNER STAINLESS STEEL PROBE 0.250 IN. | 1 | |
| BPRA-18-SS | ROTATING SCANNER STAINLESS STEEL PROBE 0.281 IN | 1 | |
| BPRA-20-SS | ROTATING SCANNER STAINLESS STEEL PROBE 0.312 IN | 1 | |
| BPRA-22-SS | ROTATING SCANNER STAINLESS STEEL PROBE 0.343 IN. | 1 | |
| BPRA-24-SS | ROTATING SCANNER STAINLESS STEEL PROBE 0.375 IN. | 1 | |
| BPRA-28-SS | ROTATING SCANNER STAINLESS STEEL PROBE 0.437 IN | 1 | |
| BPRA-29-SS | ROTATING SCANNER STAINLESS STEEL PROBE 0.437 IN | 1 | |
| BPRA-30-SS | ROTATING SCANNER STAINLESS STEEL PROBE 0.468 IN. | 1 | |
| BPRA-40-SS | ROTATING SCANNER STAINLESS STEEL PROBE 0.625 IN | 1 | |
| BPRA-8-SS | ROTATING SCANNER STAINLESS STEEL PROBE 0.125 IN. | 1 | |
| BPRA-9-SS | ROTATING PROBE 0.14 INCH | 1 | |
| C623G3001101 | EXTRACTOR ROTATING STAR | 1 | |
| C623G3002101 | EXTRACTOR BEARING ROTATING STAR | 1 | |
| C78026-59 | ROTATING ARM RIGHT | 1 | |
| C78026-81 | ROTATING ARM LEFT | 1 | |
| CAT5944-14 | A DEVICE FOR ROTATING THE ECCENTRIC SLEEVE OF THE REAR STRUT | 1 | |
| CECV1283 | TEC ROTATING STAND | 1 | |
| CENGIRAMK3 | MK3 ROTATING CENTER | 1 | |
| CENGIRAMK4 | MK4 ROTATING CENTER | 1 | |
| CENGIRAMK5 | MK5 ROTATING CENTER | 1 | |
| CHA1542-0289 | Rotating Tool | 1 | |
| D623P3001101 | ADJUSTING DEVICE ROTATING CONTROL ROADS | 1 | |
| E20287CA | ROTATING BRACKET AND | 1 | |
| ECARN052 | SLIM ROTATING HANDLAMP | 1 | |
| ECARN052B | SLIM ROTATING HANDLAMP BLACK | 1 | |
| ECARN052G | SLIM ROTATING HANDLAMP GREEN | 1 | |
| ECARN052O | SLIM ROTATING HANDLAMP ORANGE | 1 | |
| ECPR10072 | ECPR10072 750 LUMEN ROTATING MAGNETIC PROJECT LIGHT (BLUE-POINT®) | 2 | |
| ECPRL092 | COMPACT ROTATING LIGHT | 1 | |
| EMR 12.0M/SS/50WL | ROTATING PROBE | 1 | |
| EMR 3.9M/SS/125WL | ROTATING PROBE | 1 | |
| EMR 4.7M/SS/80WL | ROTATING PROBE | 1 | |
| EMR 4_7M/SS/80WL | ROTATING PROBE | 1 | |
| EMR 6.25M/SS/80WL | ROTATING PROBE | 1 | |
| EMR 6.2M/SS/50WL | ROTATING PROBE | 1 | |
| EMR 6.2M/SS/51WL | ROTATING PROBE | 1 | |
| EMR 6_25M/SS/80WL | ROTATING PROBE | 1 | |
| EMR 6_2M/SS/50WL | ROTATING PROBE | 1 | |
| EMR4.7M/SS/50WL | ROTATING PROBE FOR INSPECTION OF HOLES TYPE (A) | 1 | |
| EMR4_7M/SS/50WL | MINI ROTATING PROBES | 1 | |
| EMR6.2M/SS/50WL | ROTATING PROBE FOR INSPECTION OF HOLES TYPE (B) | 1 | |
| ESR 4_7SS | ROTATING PROBE | 1 | |
| ESR 6.0SE | ROTATING PROBE | 1 | |
| ESR 6_0SE | ROTATING PROBE | 1 | |
| ESR 6_2SS | ROTATING PROBE | 1 | |
| F80-0-56237 | Test, Holding Fixture Rotating (6IT) | 1 | |
| FACN16-4L6-R | MK4 ROTATING CENTER | 1 | |
| FR80 | RATCHET WITH ROTATING HANDLE | 1 | |
| G601R324304-1 | CENTERING TOOLS, ROTATING TOOLS | 5 | |
| HA-350A93-3316-20 | ROTATING STAR REPLACEMENT WRENCH | 1 | |
| HA-350A93-3710-00 | TOOLS ROTATING STAR EXTRACTION | 1 | |
| HA-350A93-3712-00 | ASSEMBLY BLOCK, ROTATING STAR | 1 | |
| HA-350A93-3713-00 | ASSEMBLY BLOCK, NON-ROTATING STAR/ROTATING STAR | 1 | |
| HA-350A93-3804-00 | ROTATING STAR REPLACEMENT WRENCH | 1 | |
| HA-350A93-3806-00 | ROTATING STAR REPLACEMENT WRENCH | 1 | |
| HLA6517 | Screw-On Inflation Fitting with Rotating Nut AN4 Female | 1 | |
| HLA6518 | High Flow Screw-On Inflation Fitting with Rotating Nut AN4 Female | 1 | |
| HOCKING P/N205P4 | FASTENER HOLE PROBE - DIFFERENTIAL ROTATINGMETAL 7.8 MM (200 KHZ - 2 MHZ) OR SIMILAR | 1 | |
| HR.187SS | ROTATING PROBE | 1 | |
| HR.250SS | ROTATING PROBE | 1 | |
| HR.312SS/35WL | DYNAMIC ROTATING METAL 200KHZ-2MHZ 5/16 | 1 | |
| HR.375SS/35WL | DYNAMIC ROTATING METAL 200KHZ-2MHZ 3/8 | 1 | |
| HRY.312-.375 | PROBE, ROTARY BOLT-HOLE, ADJUSTABLE FROM 0.312 IN. (7.92 MM) TO 0.375 IN. (9.52 MM) DIAMETER, 100 KHZ TO 2.0 MHZ FREQUENCY RANGE, DIFFERENTIAL, SHIELDED, PLASTIC ROTATING BOLTHOLE PROBE (TECHNA NDT OR EQUIVALENT) | 1 | |
| HR_187SS | ROTATING PROBE (B1-B511) | 1 | |
| HR_250SS | ROTATING PROBE (B1-B511) | 1 | |
| HS8270 | PLATE - ROTATING SLEEVE REMOVING | 1 | |
| HTLP-1 | Ullman® All-Angle Magnetic Retrievers (Type: Rotating Head*) (Extension: 6-3/4" to 27-3/4") (Add to cart: Add To Cart) | 1 | |
| HTLP-2 | Ullman® All-Angle Magnetic Retrievers (Type: Rotating Head*) (Extension: 6-3/4" to 27-3/4") (Add to cart: Add To Cart) (Type: Standard) (Extension: 8" to 32-3/4") (Add to cart: Add To Cart) | 1 | |
| HU80954 | BLANK, OUTER COMBUSTION CASE- ROTATING CORE WASH | 9 | |
| IAE1F10007 | PULLER, REMOVAL - ENGINE ASSY, ROTATING RING, STARTER / fuel & hydraulic pump SHAFT, GEARBOX | 12 | |
| IAE1F10009 | PULLER, REMOVAL - ENGINE ASSY, ROTATING RING, I.D.G.S. GEARBOX-REMOVAL | 14 | |
| IAE1F10031 | PUSHER INSTALLATION ROTATING | 14 | |
| IAE1F10032 | PUSHER INSTALLATION ROTATING | 10 | |
| IAE1F10067 | PULLER REMOVAL ROTATING | 16 | |
| IAE1F10069 | PULLER REMOVAL ROTATING | 15 | |
| IAE1F10070 | PUSHER INSTALLATION ROTATING | 15 | |
| IAE1N20406 | ROTATING FIXTURE, INLET COWL | 5 | |
| IAE2F10057 | ROTATING KIT | 2 | |
| IAE2F10145 | FIXTURE, ROTATING | 1 | |
| IAE2F10147 | FIXTURE, ROTATING | 1 | |
| IAE2F10217 | HANDWELL, ROTATING | 1 | |
| IAE2F10229 | HANDWHEEL, ROTATING | 1 | |
| J27028-18 | ANTI-ROTATING FTG | 1 | |
| J27028-19 | ANTI-ROTATING FTG | 1 | |
| K27001-6 | ROTATING TUBE ASSY | 1 | |
| KAFAN | ROTATING LED 2 SPEED FAN | 1 | |
| KAFANPBO | ROTATING LED 2 SPEED FAN RED | 1 | |
| KAFANPJJ | ROTATING LED 2SPEED FAN EXTGRN | 1 | |
| KAFANPJK | ROTATING LED 2SPEED FAN ELORG | 1 | |
| LTCT14791-01 | Gear Separator Rotating Spline Assembly | 1 | |
| MARP-RUK-2-6-7-45 | ADJUSTABLE ROTATING PROBE FLAT BOTTOM DIA 6-7MM | 1 | |
| MHS-29-1A-0 | ROTATING PROBE TEST BLOCK, MULTIPLE HOLE STANDARD - 29 HOLES | 1 | |
| MINIMITE | ROTATING SCANNER MINIMITE | 1 | |
| MINIMITE 9744738 | ROTATING BOLTHOLE SCANNER (OLYMPUS NDT OR EQUIVALENT) SLIDING PROBE, REFLECTION, SHIELDED, 400 HZ TO 50 KHZ FREQUENCY, 0.800 IN. (20.32 MM) WIDE BY 2.000 IN. (50.80 MM) LONG, 4 PINS LEMO CONNECTOR (GEIT OR EQUIVALENT) | 1 | |
| MPBF3-05 | ROTATING HEAD | 1 | |
| MPBF3-06 | ROTATING HEAD | 2 | |
| MPBF3-07 | ROTATING HEAD | 1 | |
| MPBF3-08 | ROTATING HEAD | 1 | |
| MRRP-RUK-1 | Probe rotating for countersink ins 4.8mm | 1 | |
| MRS50-6-35 | ROTATING PROBE | 1 | |
| MRS9-8-55 | ROTATING PROBE | 1 | |
| MS-15X-S1 (DINO-LITE) | MULTI-PUROSE ADAPTER; XY STAGE WITH 360 DEGREE ROTATING TURNTABLE | 1 | |
| MS15X | MULTI-PUROSE ADAPTER; XY STAGE WITH 360 DEGREE ROTATING TURNTABLE | 1 | |
| MT-150 | ROTATING BASE STAND | 1 | |
| NBWS-1 | ROTATING WHEEL & TYRE STORAGE STAND | 1 | |
| OHME65B01925 | SLING ASSEMBLY - ROTATING MIDFLAP INBOARD AND OUTBOARD TRAILING EDGE FLAP | 2 | |
| PRF 050-060051 | ROTATING FEXIBLE PROBE DIA= 5MM-6MM | 1 | |
| PRF040-050051 | PROBE, ROTATING | 1 | |
| PRF060-070051 | PROBE, ROTATING | 1 | |
| PRF120-130051 | ROTATING PROBE | 1 | |
| PRR0357-035 | PROBE, ROTATING | 1 | |
| PRR0700-35 | ROTATING RIGID | 1 | |
| PWA107956 | DRIFT, HANDLE-GEARBOX, FACE SEAL ROTATING RING, INSTALL | 1 | |
| PWA29602 | ADAPTER-ROTATING #2 BRG_[PWA29602] | 1 | |
| PWA56018-79 | BRACKET,EYE,ROTATING SHAFT | 1 | |
| PWA76271 | KIT - HIGH SPEED TURBINE AND COMPRESSOR ROTATING | 1 | |
| PWA80156 | ADAPTER PULLER GEARBOX SEAL ROTATING RING REMOVAL HYD PUMPS FP/FB | 1 | |
| PWA80157 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING REMOVAL IDGS | 1 | |
| PWA80158 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING REMOVAL STARTER | 1 | |
| PWA80222 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING DEOILER | 1 | |
| PWA80237 | PULLER MECHANICAL GEARBOX PMA FACE SEAL ROTATING RING REMOVAL | 2 | |
| PWA81098 | PULLER MECHANICAL GEARBOX FACE SEAL ROTATING RING REMOVAL | 1 | |
| PWA85572-1 | COMPRESSOR ROTATING KIT (FOOT OPERATED) OPTIONAL TO PWA 85572 | 1 | |
| PWA85572-2 | COMPRESSOR ROTATING KIT (HAND OPERATED) OPTIONAL TO PWA 85572-1 | 1 | |
| PWC31534 | WRENCH, HP COMPRESSOR ROTATING | 1 | |
| PWC31540 | WRENCH, HP COMPRESSOR ROTATING | 2 | |
| PWC46679 | MTF LIFTING/ROTATING FIXTURE | 1 | |
| PWC46693 | ROTATING RING | 1 | |
| PWC50397 | anti-rotating | 1 | |
| PWC51413 | anti-rotating | 1 | |
| PWC69138 | anti-rotating adap. | 1 | |
| PWC89880 | ROTATING BASE PLATE | 1 | |
| RA-5-8 | ROTATING PROBE | 1 | |
| RB 92700-10311-041 | ROTATING AND STATIONARY SPHERICAL SEARING INSTALLER/REMOVER | 2 | |
| RB6798803 | Compressor Rear Labyrinth Rotating Seal Drift | 2 | |
| RB6891196 | Power Turbine Rotating Seal & Bearing Press | 2 | |
| RB6893735 | DRIFT--COMPRESSOR REAR LABYRINTH ROTATING SEAL | 1 | |
| RBE105- 13101W3 | DISASSEMBLY/ASSEMBLY – ROTATING CONTROL ROD | 2 | |
| RBE105-13101W3 | DISASSEMBLY/ASSEMBLY – ROTATING CONTROL ROD | 2 | |
| RBE350A93-3316-20 | Rotating Star Replacement Wrench | 2 | |
| RBE350A93-3710-00 | TOOLS ROTATING STAR EXTRACTION | 2 | |
| RBE350A93-3712-00 | ASSEMBLY BLOCK, ROTATING STAR | 2 | |
| RBE350A93-3713-00 | ASSEMBLY BLOCK, NON-ROTATING STAR/ROTATING STAR | 2 | |
| RBE350A93-3804-00 | Rotating Star Replacement Wrench | 2 | |
| RBE350A93-3806-00 | Rotating Star Replacement Wrench | 2 | |
| RBE350A94-2720-00 | ROTATING GRIP ADJUSTING TOOL | 2 | |
| RBT18512 | Main Rotor Rotating Swashplate Bearing Removal | 2 | |
| RBW6700G00133-6F | MAIN ROTOR ROTATING CONTROL ADJUSTING TOOL KIT | 2 | |
| RBW6700G02531-6F | TAIL ROTOR ROTATING CONTROL ADJUSTING TOOL KIT | 2 | |
| RBW6705G00332-3G | Tail Rotor Rotating Controls Adjusting | 1 | |
| RBW6705G03331-3G | Positioning Tool Main Rotor Rotating Scissor | 2 | |
| RLP-UR101GT-.187-0.218 | ROTATING PROBE FOR HFEC TESTING ON RIVET HOLE DIAMETER 0.187"-0.218" | 1 | |
| RLP-UR101GT-.312-0.375 | ROTATING PROBE FOR HFEC TESTING ON RIVET HOLE DIAMETER 0.312"-0.375" | 1 | |
| RR.140SS/1.1WL | ROTATING PROBE 0.14 INCH | 1 | |
| RR.156SE/1.1WL | ROTATING SCANNER PROBE, SPO-3564, PROBE DIAMETER 0.156 IN. -0.187 | 1 | |
| RR.171SS/1.1WL | ROTATING PROBE 0.171 INCH | 1 | |
| RR.187SE/1.1WL | ROTATING SCANNER PROBE SPO-3564 | 1 | |
| RR.218SE/1.1WL | ROTATING SCANNER PROBE SPO-3564 | 1 | |
| RR.218SS/1.1WL | ROTATING SCANNER STAINLESS STEEL PROBE 0.218 IN. | 1 | |
| RR.250SE/1.1WL | ROTATING SCANNER PROBE SPO-3564 | 1 | |
| RR.281SE/1.5WL | ROTATING SCANNER PROBE SPO-3564 | 1 | |
| RR.281SS/1.5WL | ROTATING SCANNER STAINLESS STEEL PROBE 0.281 IN | 1 | |
| RR.437SS/1.5WL | ROTATING SCANNER STAINLESS STEEL PROBE 0.437 IN | 1 | |
| RR.625SS/1.5WL | ROTATING SCANNER STAINLESS STEEL PROBE 0.625 IN | 1 | |
| RR30MSE | ADJUSTABLE ROTARY PROBE 30MM - 34.8MM ROTATING PROBE ( PN: SPO3564) | 1 | |
| RRT028624 | ROTATING SUPPORT BASE | 1 | |
| RRT08066 | ROTATING XWB PALLETT 4 (SA4 MAIN ASSY) | 1 | |
| RR_156SS/1_1WL | ROTATING SCANNER STAINLESS STEEL PROBE 0.156 IN | 1 | |
| RS100 | ROTATING PROBE | 1 | |
| RS30 | ROTATING PROBE | 1 | |
| RS3550 | ROTATING PROBE | 1 | |
| RS4-7-35 | ROTATING PROBES | 1 | |
| RS45 | ROTATING PROBE | 1 | |
| RS5011 | ROTATING PROBE | 1 | |
| RS5049 | ROTATING PROBE | 1 | |
| RS5064 | ROTATING PROBE | 2 | |
| RS5078 | ROTATING PROBE | 1 | |
| RS54 | ROTATING PROBE | 1 | |
| RS6-2-35 | ROTATING PROBE | 1 | |
| RS60 | ROTATING PROBE | 1 | |
| RSE1177 | ROTATING FIXTURE, THRUST REVERSER | 1 | |
| RSE1177 REV A | ROTATING FIXTURE, THRUST REVERSER | 1 | |
| RSM11-0-50 | ROTATING PROBE | 1 | |
| RSM12-0-50 | ROTATING PROBE | 1 | |
| RSM12-6-50 | ROTATING PROBE | 1 | |
| RSM3-6-50 | ROTATING PROBE | 1 | |
| RSM3-9 | ROTATING PROBE | 1 | |
| RSM3-9-125 | ROTATING PROBE | 1 | |
| RSM4-7-35 | OLYMPUS ROTATING PROBE (RSM4-7-35), DIAMETER OF 4.7 MM (0.185 IN) X 35 MM (1.378 IN) IN LENGTH. | 1 | |
| RSM4-7-50 | ROTATING PROBE | 1 | |
| RSM4-7-80 | ROTATING PROBE | 1 | |
| RSM50-4-7 | ROTATING PROBE FOR INSPECTION OF HOLES TYPE (A) | 1 | |
| RSM50-6-2 | ROTATING PROBE FOR INSPECTION OF HOLES TYPE (B) | 1 | |
| RSM50/10.2 | MINI ROTATING PROBES | 1 | |
| RSM50/11.0 | MINI ROTATING PROBES | 1 | |
| RSM50/11.4 | MINI ROTATING PROBES | 1 | |
| RSM50/11.8 | MINI ROTATING PROBES | 1 | |
| RSM50/12.6 | MINI ROTATING PROBES | 1 | |
| RSM50/13.4 | MINI ROTATING PROBES | 1 | |
| RSM50/13.9 | MINI ROTATING PROBES | 1 | |
| RSM50/3.5 | MINI ROTATING PROBES | 1 | |
| RSM50/3.6 | MINI ROTATING PROBES | 1 | |
| RSM50/3.9 | MINI ROTATING PROBES | 1 | |
| RSM50/4.3 | MINI ROTATING PROBES | 1 | |
| RSM50/4.7 | MINI ROTATING PROBES | 1 | |
| RSM50/5.1 | MINI ROTATING PROBES | 1 | |
| RSM50/5.6 | MINI ROTATING PROBES | 1 | |
| RSM50/6.25 | MINI ROTATING PROBES | 1 | |
| RSM50/6.6 | MINI ROTATING PROBES | 1 | |
| RSM50/7.0 | MINI ROTATING PROBES | 1 | |
| RSM50/7.8 | MINI ROTATING PROBES | 1 | |
| RSM50/8.2 | MINI ROTATING PROBES | 1 | |
| RSM50/9.4 | MINI ROTATING PROBES | 1 | |
| RSM50/9.8 | MINI ROTATING PROBES | 1 | |
| RSM55-9-2 | ROTATING PROBE 9.2 MM | 1 | |
| RSM6-2-50 | ROTATING PROBE | 1 | |
| RSM6-2-51 | ROTATING PROBE | 1 | |
| RSM6-25-80 | ROTATING PROBE | 1 | |
| RSM6-3-35 | OLYMPUS ROTATING PROBE (RSM6-3-35), DIAMETER OF 6.3 MM (0.248 IN) X 35 MM (1.378 IN) IN LENGTH. | 1 | |
| RSM7-8-50 | ROTATING PROBE | 1 | |
| RSM9-5-50 | ROTATING PROBE | 1 | |
| RSM9-8-50 | ROTATING PROBE | 1 | |
| RSMFATR61 | ROTATING PROBE | 1 | |
| RSMFATR63 | ROTATING PROBE | 1 | |
| RSMFATR65 | ROTATING PROBE | 1 | |
| RSMV6-7-45 | ROTATING PROBE | 1 | |
| RSMVS10-12-70 | ROTATING PROBE | 1 | |
| RSMVS12-15 | ROTATING PROBE | 1 | |
| RSMVS15-20-110 | ROTATING PROBE | 1 | |
| RSMVS15-20-111 | ROTATING PROBE | 1 | |
| RSMVS20-25-110 | ROTATING PROBE | 1 | |
| RSMVS5-6-30 | ROTATING PROBE | 1 | |
| RSMVS6-7-45 | ROTATING PROBE | 1 | |
| RSMVS6-7-50 | ROTATING PROBE | 1 | |
| RSS6-0-6-5-50 | ROTATING PROBE | 1 | |
| RST2345RF | TOOL, STAKING ROTATING FIXTURE | 1 | |
| RST3004RF | TOOL, STAKING, ROTATING FIXTURE | 1 | |
| RSVS15-20 | RSVS15-20(ROTATINGPROBE) | 1 | |
| RVSM10-1 | ROHMANN EXPANDABLE ROTATING PROBES | 1 | |
| RVSM12-15 | ROHMANN EXPANDABLE ROTATING PROBES | 1 | |
| RVSM15-20 | ROHMANN EXPANDABLE ROTATING PROBES | 1 | |
| RVSM20-25 | ROHMANN EXPANDABLE ROTATING PROBES | 1 | |
| SBA300-57-6009 | ROTATING BOLT INSPECTION VANMAR TOOL | 1 | |
| SEU-11-35 | ROTATING SCANNER STAINLESS STEEL PROBE 11 | 1 | |
| SEU-11.0-35 | ROTATING SCANNER STAILESS | 1 | |
| SEU-11.9-35 | ROTATING SCANNER STAINLESS STEEL PROBE | 1 | |
| SEU-13.0-35 | ROTATING SCANNER STAINLESS STEEL PROBE | 1 | |
| SEU-13.9-35 | ROTATING SCANNER STAINESS STEEL | 1 | |
| SEU-15.1-35 | ROTATING SCANNER | 1 | |
| SEU-16.2-35 | ROTATING SCANNER | 1 | |
| SEU-17.1-35 | ROTATING SCANNER STAINESS STEEL | 1 | |
| SEU-18.3-35 | ROTATING SCANNER STAINLESS STEEL PROBE | 1 | |
| SEU-19.1-35 | ROTATING SCANNER STAINLESS | 1 | |
| SEU-2.3-35 | ROTATING SCANNER STAINLESS STEEL PROBE 2.3 | 1 | |
| SEU-20.2-35 | ROTATING SCANNER STAINLESS STEEL PROBE | 1 | |
| SEU-21.0-35 | ROTATING SCANNER | 1 | |
| SEU-22.2-35 | ROTATING SCANNER | 1 | |
| SEU-23.0-35 | ROTATING SCANNER STAINLESS STEEL PROBE | 1 | |
| SEU-24.2-35 | ROTATING SCANNER | 1 | |
| SEU-25.0-35 | ROTATING SCANNER | 1 | |
| SEU-3.0-35 | ROTATING SCANNER | 1 | |
| SEU-3.1-35 | PROBE ROTATING SCANNER (NDT) | 1 | |
| SEU-3.6-35 | ROTATING SCANNER STAINLESS STEEL PROBE 3.6 | 1 | |
| SEU-3.9-35 | PROBE ROTATING SCANNER (NDT) | 1 | |
| SEU-4.7-35 | PROBE ROTATING SCANNER (NDT) | 1 | |
| SEU-5.0-35 | ROTATING SCANNER STAINLESS STEEL PROBE | 1 | |
| SEU-5.5-35 | PROBE ROTATING SCANNER (NDT) | 1 | |
| SEU-6.0-35 | ROTATING SCANNER STAINLESS STEEL PROBE | 1 | |
| SEU-7.0-35 | ROTATING SCANNER STAINLESS STEEL PROBE | 1 | |
| SEU-7.8-35 | ROTATING SCANNER STAINLESS STEEL PROBE 7.8 | 1 | |
| SEU-7.9-35 | ROTATING SCANN ER | 1 | |
| SEU-9.0-35 | ROTATING SCANNER STAINLESS STEEL PROBE | 1 | |
| SEU-9.9-35 | ROTATING SCANNE R | 1 | |
| SG 350A93-3316-20 | ROTATING STAR REPLACEMENT WRENCH | 1 | |
| SG 350A93-3713-00 | ASSEMBLY BLOCK, NON-ROTATING STAR / ROTATING STAR | 1 | |
| SG350A93-3710-00 | TOOLS. ROTATING STAR EXTRACTION | 1 | |
| SP0-3564 | ROTATING PLASTIC PROBE SERIES SPO-3564 RANGE OF HOLE SIZE 7.9 MM - 9.5 MM (0.312 IN. - 0.375 IN.) WORKING LENGTH 1.5 IN | 1 | |
| SP03564 | ADJUSTABLE ROTARY PROBE 30MM - 34.8MM ROTATING PROBE ( PN: SPO3564) | 1 | |
| SPO-5965 | ROTATING PLASTIC SCANNER PROBES | 1 | |
| SPO-5965 .125-.156 | ROTATING PLASTIC SCANNER PROBES | 1 | |
| SPO-5965 .156-.187 | ROTATING PLASTIC SCANNER PROBES | 1 | |
| SPO3564 | ROTATING PROBE DIAMETER 3.96 MM (0.156 IN) - 4.75 MM (0.187 IN) | 1 | |
| SR49010 | ROTATING PROBE | 1 | |
| SR4903 | ROTATING PROBE | 1 | |
| SR49045 | ROTATING PROBE | 1 | |
| SR49054 | ROTATING PROBE | 1 | |
| SR4906 | ROTATING PROBE | 1 | |
| STD-1288 | NOZZLE - ROTATING, FOR 3/8 INCH I.D. HOSE (SELF-FE | 1 | |
| SUB-10-12 | PROBE,ROTATING,.156-.187 | 1 | |
| SUB-14-16 | ET probe, rotating, differential, (NDT) | 1 | |
| T-439377 | Tool Rotating | 1 | |
| T13999-003 | ROTATING SCANNER STAINLESS STEEL PROBE 3.6 | 1 | |
| T430085 | KEY - SPLINED, FFRHP FUEL PUMP ROTATING | 1 | |
| TB3008G001 | ROTATING ASSEMBLY STAND | 1 | |
| TB3008G002 | ROTATING ASSEMBLY STAND | 1 | |
| TEK-3007 | Special Rotating Probe, Differential w/ Special Marks | 1 | |
| TM0589G001 | ROTATING TABLE | 1 | |
| TM4109G001 | ROTATING ENGINE STAND | 1 | |
| TT-12-7/8 | ROTATING TABLE | 1 | |
| U8602077 | ROTATING SCANNER STAINLESS STEEL PROBE 3.6 | 2 | |
| U8609313 | ROTATING SCANNER STAINLESS STEEL PROBE 2.3 | 1 | |
| U8609333 | ROTATING SCANNER STAINLESS STEEL PROBE 7.8 | 1 | |
| U8609347 | ROTATING SCANNER STAINLESS STEEL PROBE 11 | 1 | |
| U8610231 | ROTATING SCANNER PRO | 1 | |
| U8610234 | ROTATING SCANNER PRO | 1 | |
| U8614059 | ROTATING SCANNER PROBE, SPO-3564, PROBE DIAMETER 0.156 IN. -0.187 | 1 | |
| U8614091 | ROTATING PLASTIC SCANNER 4-PIN LEMO PROBE (SPO-3564) | 1 | |
| U8614092 | ROTATING SCANNER PROBE, SPO-3564, PROBE DIAMETER 0.218-0.250 | 1 | |
| U8614093 | ROTATING SCANNER PROBE. SPO-3564. PROBE DIAMETER 0.250-0.281 | 1 | |
| U8614094 | ROTATING SCANNER PROBE. SPO-3564. PROBE DIAMETER 0.281-0.312 | 1 | |
| U8614096 | ROTATING PLASTIC SCANNER 4-PIN LEMO PROBE (SPO-3564) | 1 | |
| U8614098 | ROTATING PLASTIC SCANNER 4-PIN LEMO PROBE (SPO-3564) | 1 | |
| U8614100 | ROTATING PLASTIC SCANNER 4-PIN LEMO PROBE (SPO-3564) | 1 | |
| U8614101 | ROTATING SCANER | 1 | |
| U8670040 | DELUXE RA SCANNER KIT ROTATING | 1 | |
| U8750012 | MINIMITE FISCHER ROTATING SCANNER | 1 | |
| U8750013 | ROTATING SCANNER MINIMITE | 2 | |
| UR.156SE | PROBE,ROTATING,.156-.187 | 1 | |
| UR.156SE/1.75WL | ROTATING SCANNER PRO | 1 | |
| UR.218SE/2WL | ROTATING SCANNER PRO | 1 | |
| UR11.0M/SS/35WL | ROTATING SCANNER STAINLESS STEEL PROBE 11 | 1 | |
| UR2.3M/SS/35WL | ROTATING SCANNER STAINLESS STEEL PROBE 2.3 | 1 | |
| UR3.6M/SS/35WL | ROTATING SCANNER STAINLESS STEEL PROBE 3.6 | 1 | |
| UR3.6M/SS/50WL | ROTATING PROBE | 1 | |
| UR3.9M/SS/35WL | STAINLESS STEEL ROTATING SCANNER PROBE | 1 | |
| UR3.9M/SS/50WL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE | 1 | |
| UR4.7M/SS/50WL | ROTATING PROBE | 1 | |
| UR4_7M/SS/50WL | ROTATING PROBE | 1 | |
| UR5.0M/SS/35WL | ROTATING SCANNER STAINLESS STEEL PROBE | 1 | |
| UR6.0M/SS/35WL | ROTATING SCANNER STAINLESS STEEL PROBE | 1 | |
| UR6.2M/SS/50WL | ROTATING PROBE | 1 | |
| UR7.8M/SS | ROTATING SCANNER STAINLESS STEEL PROBE 7.8 | 1 | |
| UR7.9M/SS/35WL | ROTATING SCANNER STAINLESS STEEL PROBE | 1 | |
| UR9.0M/SS/35WL | ROTATING SCANNER STAINLESS STEEL PROBE | 1 | |
| UR9.8M/SS/50WL | ROTATING PROBE | 1 | |
| UR9.9M/SS/35WL | ROTATING SCANNER STAINLESS STEEL PROBE | 1 | |
| URX 10-12M/70WL | ROTATING PROBE | 1 | |
| URX 20-25M/110WL | ROTATING PROBE | 1 | |
| URX 5-6.5M | ROTATING PROBE | 1 | |
| URX 6-7M/45WL | ROTATING PROBE | 1 | |
| URX20-25M/110WL | ROTATING PROBE | 1 | |
| URY 15-20M/111WL | ROTATING PROBE | 1 | |
| URY.125.156SS/2.750AL | ROTATING PROBE-SPO3564 | 1 | |
| URY.156-.187 | ROTARY BOLT-HOLE PROBE, ADJUSTABLE FROM 0.156 IN (3.96 MM) TO 0.187 IN (4.75 MM) DIAMETER, 100 KHZ-2 MHZ FREQUENCY RANGE, DIFFERENTIAL, SHIELDED, PLASTIC ROTATING BOLT-HOLE PROBE (TECHNANDT OR EQUIVALENT) | 1 | |
| URY.312-.375 | PROBE, ROTARY BOLT-HOLE, ADJUSTABLE FROM 0.312 IN. (7.92 MM) TO 0.375 IN. (9.52 MM) DIAMETER, 100 KHZ TO 2.0 MHZ FREQUENCY RANGE, DIFFERENTIAL, SHIELDED, PLASTIC ROTATING BOLTHOLE PROBE (TECHNA NDT OR EQUIVALENT) | 1 | |
| UR_187SE/1_75WL | ROTATING SCANNER PRO | 1 | |
| WC31540 | WRENCH ROTATING, HP COMPRESSOR | 1 | |
| WL9-28844 | MULTI-PURPOSE BENCH VISE, 4-1/2" JAW WIDTH", 360° ROTATING HEAD & BASE | 1 | |
| YA9565A | ROTATING TL | 1 | |
| lAElN20406 | ROTATING FIXTURE, INLET COWL | 1 | |
| lC569l | PULLER NO. 6 BEARING INNER RING & ROTATING OIL SEAL | 1 | |
| lC6800 | PUSHER, ROTATING SEALS-O/S TRANSDUCER GEAR & BRG RACES- | 1 | |
| lC680l | PULLER, ROTATING SEALS & BEARING RACES-AFT SHAFT | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
