| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 732A/10 5/8 | RING TIP | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1100 | TOOL - REM / INST OF SEAL RETAINING RINGS ( WITH TIPS) “1100 PLIERS INCLUDED | 6 | |
| 1121-0628-P5 | PACE ENDURA THERMO-DRIVE DESOLDERING TIP (1121-0628-P5:GMFDM) | 1 | |
| 145-37480-405 | TIP FAIRING | 1 | |
| 145-37480-406 | TIP FAIRING | 1 | |
| 1R18664 | containment ring - Machine the Stator Vane Tips and the Rotor Path Ring Liners | 1 | |
| 1R18668 | containment ring - Machine the Stator Vane Tips and the Rotor Path Ring Liners | 1 | |
| 1R18670 | containment ring - Machine the Stator Vane Tips and the Rotor Path Ring Liners | 1 | |
| 2000-6 - DREMEL | GAS SOLDERING IRON VERSATIP 2000-6 - DREMEL | 1 | |
| 2189R | RETAINING RING PLIERS, .023" TIP 90 DEGREES | 1 | |
| 23 | Tesa 00530451 Depth Gauge, TWIN-CAL IP67 – Small sized model with steel measuring tip – 0-25mm / 0-1" | 1 | |
| 218275 | Henkel 97248 LOCTITE Orange Syringe Tip Cap - Pack of 50 | 1 | |
| 232683 | PPG Semco 232683 Gray Rubber Syringe Tip Cap | 1 | |
| 232991 | PPG Semco 232991 Red Plastic Syringe Tip Cap | 1 | |
| 30-804-2140 | Sylvac 30-804-2140 M-Bus Multiplexer Unit PS Measuring Bench | 1 | |
| 315077 | R-MENT TIP SET FOR UNIVERSAL RING PLIERS | 1 | |
| 32479-001 | SYRINGE TIP ADAPTER (GREEN) | 5 | |
| 32479-002 | SYRINGE TIP ADAPTER (WHITE) | 1 | |
| 32479-003 | NOZZLE ASSEMBLY (SYRINGE TIP ADAPTER ) | 1 | |
| 32479-004 | SYRINGE TIP ADAPTER (BLACK) | 1 | |
| 3ASH45A | MINI BENT TIP BLACK HAND Q400 RET RING | 1 | |
| 412 | CURVED-TIP SYRINGE | 1 | |
| 5391A33 | LOCKING CHANGE-TIP RETAINING RING PLIERS SET | 1 | |
| 62213 | MULTIPLE SNAP RING PLIER 10 - 50 MM EXT-INT | 1 | |
| 6037500 | DRIBBLE FLOW TEST FIXTURE USED ON THE LARGE NOZZLE METERING TIPS FOR DRIBBLE FLOW TEST. | 1 | |
| 6037501 | DRIBBLE FLOW TEST FIXTURE USED ON THE SMALL NOZZLE METERING TIPS FOR DRIBBLE FLOW. | 1 | |
| 655A100-A | TOOLVERTICAL TAIL TIP FAIRING SPREADER | 1 | |
| 6795590-3 | FINGER TIP, BEARING PULLER; GAS PRODUCER TURBINE, POWER TURBINE | 1 | |
| 6877004 | STEM STRAIGHTENING FIXTURE HOLDS FUEL NOZZLE WHILE ADJUSTING METERING TIP POSITION. | 1 | |
| 6877010 | HOLDING FIXTURE, TIP END HOLDS FUEL NOZZLE DURING CUTTING, MACHINING, AND WELDING OF TIP END COMPONENTS. | 1 | |
| 6877021 | SEAL FIXTURE, SECONDARY ORIFICE (WITH INLET SIMULTANEOUSLY CONNECTS METERING AND EXIT HOSE) TIP AND INLET OF FUEL NOZZLE ASSEMBLY TO PRESSURE SOURCE FOR PROOF TESTING. | 1 | |
| 6897103 | HOLDING FIXTURE, TIP SEAL HOLDS METERING SET SEAL FIXTURES ON FUEL NOZZLE FOR PRESSURE TESTING. | 1 | |
| 732A/10 11/16 | 9X12MM RING TIP 58621038 | 1 | |
| 732A/10 3/8 | 9X12MM RING TIP 58621024 | 1 | |
| 732A/10 9/16 | 9X12MM RING TIP 58621034 | 1 | |
| 75416-T003 | Adapter Torque Wrench (Tip) Feed Back Spring | 1 | |
| 834731 | Centering Fixture, 1st and 2nd Stage Impeller Axial Tip Clearance | 1 | |
| 9317797 | 9317797 : BROAD BAND FREQUENCY S-PC-P11 PITCH-CATCH PROBE, BROADBAND FREQUENCY, SPRING LOADED TIPS, | 1 | |
| 9317808 | RIGHT ANGLE MIA PROBE, SMALL 6.35 MM (0.25") TIP DIAMETER, REQUIRES BMM-H (U8770417) FOR SPRING LOAD | 1 | |
| 9322075 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 | |
| 9323945 | S-PC-P14 BONDMASTER PITCH-CATCH PROBE, BROADBAND FREQUENCY, HIGH VOLTAGE, SPRING LOADED TIPS, 15 MM | 1 | |
| 9323952 | S-PC-P16 BONDMASTER PITCH-CATCH PROBE, BROADBAND FREQUENCY, HIGH VOLTAGE, SPRING LOADED TIPS, 15 MM | 1 | |
| A365-500 | PADDED SLEEVES FOR TAIL TIP CAP & VERTICAL FINS DURING TRANSPORT (set of 3) | 1 | |
| AF-5254 | Custom Nortec / Pratt & Whittney Eddy Current Probe, 2MHz, Dual "D'" Coil, .2.50mm, 5.6 UH Matching Inductance, Spring Loaded Tip, Differential / Bridge, Match phase angle and frequency as close as possible. Supplied with a Triax Fischer connector. | 1 | |
| AF-5300-.125SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .125"Ø-.156"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.156SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .156"Ø-.187"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.187SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .187"Ø-.250"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.250SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .250"Ø-.312"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.312SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .312"Ø-.375"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.375SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .375"Ø-.437"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.437SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .437"Ø-.500"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AGE10083 | Snap Ring Plier Tips | 1 | |
| AH365-500 | PADDED SLEEVES FOR TAIL TIP CAP & VERTICAL FINS DURING TRANSPORT (set of 3) | 1 | |
| ARD-350T | 3.50MHZ .500"Ø REPLACEABLE DELAY TRANSDUCER WITH .394" LONG DELAY TIP. Includes DRR202 RETAING RING. Includes Test Report and Certificate of Conformance. | 1 | |
| AT100S/FF-IV94N | AT100S/FF-IV94N IPLEX NX TIP ADAPTER - INCLUDES O-RING. - DIRECTION OF VIEW: SIDE - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 100° - DEPTH OF FIELD: 8 - MM - 1 YEAR WARRANTY | 1 | |
| AT120D/FF-IV96N | TIP ADAPTER-INCL.O-RING | 1 | |
| AT120D/NF-IV94N | IPLEX NX TIP ADAPTER INCLUDE O-RING. DIRECTION OF VIEW: DIRECT SCOPE DIAMETER: 4 MM FIELD OF VIEW: 120° DEPTH OF FIELD: 2MM TO 200MM | 1 | |
| AT120D/NF-IV96N | TIP ADAPTER-INCL.O-RING | 1 | |
| AT120S/FF-IV96N | TIP ADAPTER-INCL.O-RING | 1 | |
| AT120S/NF-IV96N | TIP ADAPTER-INCL.O-RING | 1 | |
| AT2016,ET-9 | ET-9, AT2016 TIP,SPRING SHREDDER | 1 | |
| AT2020,ET-8 | ET-8, AT2020 TIP,SPRING SHREDDER | 1 | |
| AT60S60S-IV86 | plex Tip Adapter (90 degree measuring). | 2 | |
| ATH 2052-TSS | TIP, SHEDDER, SPRING | 1 | |
| ATI521C | DEBURRING TIP 3/8D- 7/32 SHK | 1 | |
| C25 | MULTITIP SOLDERING GUN | 2 | |
| COM-7293 | PICK O-RING, 90 DEGREE TIP | 1 | |
| CTSG861TIPKIT | SOLDERING TIPS AND HOLDER KIT | 1 | |
| EW-404 | Conical Soldering Tip, .08mm, for Weller WES and WD stations and EC, PES and WCC irons, Mfr Plato | 1 | |
| FBPT-U25PL | FBPT-U25PL;Tip Univ. 2.5mm Patch Cord for FBP Plastic Inner Ring | 1 | |
| FLUKE TL71 | MEASURING TIPS BLACK/RED 10A CAT II 1000V 1,5M | 1 | |
| IV96-AT120D/FF | IPLEX NX TIP ADAPTOR: OPTICAL TIP ADAPTOR FOR IV96 IPLEX NX INDUSTRIAL VIDEOSCOPES · OUTER DIAMETER: 6.0MM · FIELD OF VIEW: 120° DIRECTION OF VIEW: 0° DIRECT VIEW · FAR FOCUS · DEPTH OF FIELD: 19MM TO INFINITY · DISTAL END LENGTH: 21.4MM · O-RING QTY 6 IN | 1 | |
| JCSJCTU | UNIV SNAP RING PLIER TIPS | 1 | |
| JHWPL-1600C | SNAP RING PLIERS & TIPS SET | 1 | |
| JHWPL-1600C3 | SNAP RING TIP SET | 1 | |
| JHWPL-531 | FIXED TIP RET. RING PLIER-INT. | 1 | |
| JHWPL-532 | FIXED TIP RET. RING PLIER-INT. | 1 | |
| JHWPL-533 | FIXED TIP RET. RING PLIER-EXT. | 1 | |
| JHWPL-534 | FIXED TIP RET. RING PLIER-EXT. | 1 | |
| KDS315077 | RETAINING RING PLIER TIP ITEM# 00996582000P | 1 | |
| MAJ-1735D | STEREO MEASURING TIP -FORWARD | 1 | |
| MAJ-1735S | STEREO MEASURING TIP -SIDE | 1 | |
| MAJ-1736D | STEREO MEASURING TIP -FORWARD | 1 | |
| N414700 | AT120S/FF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING FIELD DEP 20-MM | 1 | |
| N4148800 | AT120D/NF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. 2,275.00 2,275.00 - DIRECTION OF VIEW: DIRECT - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 120° - DEPTH OF FIELD: 2 - 200MM - 1 YEAR WARRANTY | 2 | |
| N4148900 | AT120D/FF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. - DIRECTION OF VIEW: DIRECT - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 120° - DEPTH OF FIELD: 17 - MM - 1 YEAR WARRANTY | 2 | |
| N4149000 | AT100S/NF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. - DIRECTION OF VIEW: SIDE - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 100° - DEPTH OF FIELD: 2 - 15MM - 1 YEAR WARRANTY | 1 | |
| N4149300 | AT80D/FF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING | 1 | |
| N4149600 | AT120S/NF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING FIELD DEPTH 4-150MM | 2 | |
| PRC87 | T-HANDLE CHANGEABLE-TIP RETAINING RING TOOLS KIT WITH INTERNAL AND EXTERNAL BITS TOOL , MANUFACTURER A&E HAND | 1 | |
| R60B7 | TIP, SOLDERING, SCRE | 1 | |
| RB6795590-3A | Finger Tip, Bearing Puller; Gas Producer Turbine, Power Turbine & Compressor | 2 | |
| RB6795590-3B | FINGER TIP, BEARING PULLER; GAS PRODUCER TURBINE, POWER TURBINE | 2 | |
| S-PC-P14 | S-PC-P14 BONDMASTER PITCH-CATCH PROBE, BROADBAND FREQUENCY, HIGH VOLTAGE, SPRING LOADED TIPS, 15 MM | 1 | |
| S-PC-P16 | S-PC-P16 BONDMASTER PITCH-CATCH PROBE, BROADBAND FREQUENCY, HIGH VOLTAGE, SPRING LOADED TIPS, 15 MM | 1 | |
| SNG 0.375/31/25K | .375" X 3" LONG, SPRING LOADED TIP SURFACE PROBE, 10-50KHZ, BRIDGED, TRIAX CONNECTOR | 1 | |
| SNG 375-3L | .375" X 3" LONG, SPRING LOADED TIP SURFACE PROBE, 20KHZ, BRIDGED, TRIAX CONNECTOR | 1 | |
| SPD.25-20K | .250" Spring Loaded Tip Surface Probe, 20-100KHz, Triax Connector | 1 | |
| SPD.375-10K | .375" Spring Loaded Tip Surface Probe, 10KHz, Triax Connector | 1 | |
| SPD.375-20K | .375" x 3" Long, Spring Loaded Tip Surface Probe, 20KHz, Triax Connector | 1 | |
| SPD.375-25K | .375" x 3" Long, Spring Loaded Tip Surface Probe, 10-50KHz, Triax Connector | 1 | |
| SPD.375-25K-2M | .375" x 3" Long, Spring Loaded Tip Surface Probe, 10-50KHz, 2 Pin Microdot | 1 | |
| SPD.375-25K-4F | .375" x 3" Long, Spring Loaded Tip Surface Probe, 10-50KHz, 4pin Fischer | 1 | |
| SPD.375-2K | .375" Spring Loaded Tip Surface Probe, 1-5KHz, Triax Connector | 1 | |
| SPD.375-2K-2M | .375" Spring Loaded Tip Surface Probe, 1-5KHz, 2 Pin Microdot | 1 | |
| SPD.375-5K | .375" Spring Loaded Tip Surface Probe, 5-10KHz, Triax Connector | 1 | |
| SPD.375-5K-2M | .375" Spring Loaded Tip Surface Probe, 5-10KHz, 2 Pin Microdot | 1 | |
| SPR.25-100K | .250" Spring Loaded Tip Surface Probe, 25-200KHz, Triax Connector, Reflection | 1 | |
| SPR.34-20K | .340" Diameter, Spring Loaded Tip Surface Probe, 10-50KHz, Reflection, Triax Connector | 1 | |
| SPR.4-20K | .400" Diameter, Spring Loaded Tip Surface Probe, 10-50KHz, Reflection, Triax Connector | 1 | |
| SRPC4790 | CONVERTIBLE RETAINING RING PLIERS, 6-1/2" LENGTH, 90° TIP ANGLE (RED) | 1 | |
| ST931 | BALL POINT MULTIPLE - BEARING STAKING TOOL | 1 | |
| ST931-190-500 | Standard tool,ball point multiple-bearing starking tool | 1 | |
| ST931-190-562 | BALL POINT MULTIPLE – BEARING STAKING TOOL | 1 | |
| ST931-250-750 | Standard tool,ball point multiple-bearing starking tool | 2 | |
| T-ST2 | SOLDERING TIP .093W X .75L | 1 | |
| T-ST3 | SOLDERING TIP .125W X .75L | 1 | |
| T-ST4 | SOLDERING TIP .187W X .75L | 1 | |
| T0054440699 | SOLDERING TIP | 1 | |
| T0054442399 | SOLDERING TIP | 2 | |
| T0054442499 | SOLDERING TIP | 1 | |
| T0054448299 | SOLDERING TIP | 1 | |
| T0054449899 | SOLDERING TIP | 1 | |
| U8010012 | 9317797 : BROAD BAND FREQUENCY S-PC-P11 PITCH-CATCH PROBE, BROADBAND FREQUENCY, SPRING LOADED TIPS, | 1 | |
| U8010015 | RIGHT ANGLE MIA PROBE, SMALL 6.35 MM (0.25") TIP DIAMETER, REQUIRES BMM-H (U8770417) FOR SPRING LOAD | 1 | |
| U8010062 | S-PC-P16 BONDMASTER PITCH-CATCH PROBE, BROADBAND FREQUENCY, HIGH VOLTAGE, SPRING LOADED TIPS, 15 MM | 1 | |
| U8770335 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 | |
| U8800601 | S-PC-P14 BONDMASTER PITCH-CATCH PROBE, BROADBAND FREQUENCY, HIGH VOLTAGE, SPRING LOADED TIPS, 15 MM | 2 | |
| URL-260 | LONG "Soaring" WING TIP COVERS (connects with velcro), ALL YEAR USE (set of 2) | 1 | |
| YA145-2 | PICK, O RING 90 TIP | 6 | |
| YA145-4 | O/RING ANG TIP PCK | 1 | |
| YH-192 | CALIBRATION DEVICE FOR TEMPERATURE MEASUREMENT, SOLDERING IRON TIP | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
