| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| LTCT531 | Ring Assembly | 1 | |
| MG300-403 | RING ASSEMBLY | 1 | |
| MG300-404 | RING ASSEMBLY | 1 | |
| MG300-405 | RING ASSEMBLY | 1 | |
| PWA 27685 | RING ASSEMBLY | 2 | |
| PWC67381 | Ring assembly | 1 | |
| PWC67437 | Ring assembly | 1 | |
| PWC70330 | ring assembly | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0-45245-6 | FRONT BEARING SUPPORT ASSEMBLY PULLER | 1 | |
| 016544 | SYRINGE ASSEMBLY | 1 | |
| 020915-004 | SYRINGE ASSEMBLY (WITH NOZZLE 20 MM (0.79 IN)) | 3 | |
| 020916-001 | SYRINGE ASSEMBLY (EITH OZZLE 20MM (0.79IN/) | 1 | |
| 0465410830 | ASSEMBLY SHIM C-RING | 1 | |
| 05K22680 | LYCOMING KIT - CYLINDER PISTON & RING ASSEMBLY (TIO-540-AJ1A) | 4 | |
| 0U 145048 | BALL BEARING ASSEMBLY | 1 | |
| 0U 145761 | BALL BEARING ASSEMBLY TOOL | 1 | |
| 0U141330 | ASSEMBLY TOOL NEEDLE BEARING | 1 | |
| 0U142038 | ASSEMBLY TOOL FOR BALL BEARING | 1 | |
| 0U142039 | ASSEMBLY TOOL FOR BALL BEARING | 1 | |
| 0U142040 | ASSEMBLY TOOL FOR BALL BEARING | 1 | |
| 0U142041 | ASSEMBLY TOOL FOR BALL BEARING | 1 | |
| 0U142064 | ASSEMBLY TOOL FOR BALL BEARING | 1 | |
| 0U142073 | ASSEMBLY TOOL FOR BALL BEARING | 1 | |
| 0U142075 | ASSEMBLY TOOL FOR BALL BEARING | 1 | |
| 0U142076 | ASSEMBLY TOOL FOR BALL BEARING | 1 | |
| 0U142077 | ASSEMBLY TOOL FOR BALL BEARING | 1 | |
| 0U142079 | ASSEMBLY TOOL FOR BALL BEARING | 1 | |
| 0U142092 | ASSEMBLY FOR BALL BEARING | 1 | |
| 0U145048 | BALL BEARING ASSEMBLY TOOL | 1 | |
| 0U145761 | BALL BEARING ASSEMBLY TOOL | 1 | |
| 105-14181W1 | NEEDLE BEARINGS ASSEMBLY FIXTURE | 1 | |
| 109-0110-01-109E023A | TOOL ASSEMBLY, SWASHPLATE DUPLEX BEARING POSITIONING | 1 | |
| 109-3101-86-101 | TOOL ASSEMBLY, FLOATING RING CENTERING | 1 | |
| 109-3130-53-111 | TAIL ROTOR RING NUT TOOL REMOVAL ASSEMBLY | 1 | |
| 109-3130-54-111 | TAIL ROTOR RING NUT REMOVAL TOOL ASSEMBLY | 1 | |
| 10C1103G01 | FIXTURE, CLAMPING - NO. 3 BEARING ASSEMBLY, INLET GEARBOX (CLAMPING FIXTURE) | 1 | |
| 114-1321 | O-Ring and Backup Ring Assembly Tool | 1 | |
| 114-1404 | PISTON SLEEVE BACKUP RETAINER AND O-RING ASSEMBLY TOOL | 1 | |
| 114E5803-1 | PUSHER ASSEMBLY, BEARING AND SEAL | 1 | |
| 11C4523 | DISASSEMBLY FIXTURE-STAGE 5 RING | 1 | |
| 11C4523G01 | FIXTURE, DISASSEMBLY - STAGE 5 RING RETAINER | 1 | |
| 11C4598 | STAND-ASSEMBLY/DISASSEMBLE NO. 2 BEARING (WITH HYD PUMP) | 1 | |
| 11C4598G02 | STAND, ASSEMBLY/DISASSEMBLY NO. 2 BEARING HOUSING | 1 | |
| 14J02-12A | COUPLING ASSEMBLY (WITHOUT O-RING | 2 | |
| 14J02-16A | COUPLING ASSEMBLY (WITHOUT O-RING | 4 | |
| 1544320AT3-101 | RETAINER RING PLIERS ASSEMBLY | 1 | |
| 15813 | SEAL RING ASSEMBLY INSTALLING TOOL | 1 | |
| 140125 | SPRING COMPRESSION TOOL FORK ASSEMBLY | 1 | |
| 151142 | Ball Bearing Disassembly Press | 1 | |
| 1525-502 | TOOL, ASSEMBLY, WORN WHEEL/BEARING | 1 | |
| 1544320AT3-103 | RETAINER RING PLIERS ASSEMBLY | 1 | |
| 1544320AT7-101 | LVDT GUIDE RING ASSEMBLY TOOL | 1 | |
| 1581343 | SEAL RING ASSEMBLY INSTALLING TOOL | 1 | |
| 16A11738L1-1 | PULLER ASSEMBLY, BEARING - MOUNT, POWER DRIVE UNIT | 1 | |
| 17P9M2007 | Douglas Reference Standard Assembly For the Ultrasonic Calibration of Upper Wing Skin to common Stringer, Figure24-4 sheets 253. Material: 7075 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 185742-1T | BALL BEARING ASSEMBLY TOOL (2 IT) | 1 | |
| 1C8065G01 | FIXTURE ASSEMBLY - ALIGNMENT NO. 5 AND NO. 6 BEARING | 1 | |
| 1C8183 | FIXTURE - TORQUE MEASURING - VSV ASSEMBLY | 1 | |
| 1C8412G01 | FIXTURE, TORQUE MEASURING - VSV ASSEMBLY | 1 | |
| 1C9371 | RING ASSEMBLY SUPPORT IGV STATOR CASE | 1 | |
| 1C9408 | FIXTURE, TORQUE MEASURING- VSV ASSEMBLY | 1 | |
| 1C9408G02 | Fixture, Torque Measuring - VSV Assembly | 1 | |
| 2-11057 | SPRING RETURN ASSEMBLY FIXTURE | 1 | |
| 2025261-1 | BEARING REMOVAL FIXTURE (REMOVES 3617585-001 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND 3822055-1 COUPLING SHAFT) | 1 | |
| 21-1EY475AB | ASSEMBLY TOOL CARGO DOOR SPRING | 1 | |
| 2189041F1 | Bearing Assembly Tool | 1 | |
| 23B19245 | O RING ASSEMBLY | 1 | |
| 23B19245-1 | TOOL.O.RING.ASSEMBLY | 1 | |
| 247C5307 | FIXTURE, INSTALL SPRING ASSEMBLY | 1 | |
| 284310 | DRIVER ASSEMBLY BEARING AND BUSHING | 1 | |
| 2558694 | ASSEMBLY FIXTURE USED DURING ASSEMBLY AND DISASSEMBLY OF THE BRAKE TIE BOLTS. | 2 | |
| 2558816 | DRIVER ASSEMBLY KIT, OB BEARING CUP REMOVAL | 1 | |
| 2558817 | DRIVER ASSEMBLY KIT, IB BEARING CUP REMOVAL | 1 | |
| 2558818 | OB bearing cup assembly removal dr. | 3 | |
| 2558819 | IB BEARING CUP ASSEMBLY REMOVAL DRIVER | 4 | |
| 2558820 | OB BEARING CUP ASSEMBLY REMOVAL SNAP RING | 3 | |
| 2558821 | IB BEARING CUP ASSEMBLY REMOVAL SNAP RING | 3 | |
| 2558842 | ASSEMBLY SHIM USED TO PREVENT TOO MUCH ADJUSTER PULL THROUGH DURING LEAKAGE TEST. | 1 | |
| 2560877 | BEARING CUP ASSEMBLY INSTALLATION DRIVER | 1 | |
| 2561514 | Tool, bearing assembly | 2 | |
| 2566535 | Metering Valve Assembly Fixture | 1 | |
| 23054787 | Ring - Cryogenic,2nd & 3rd Stator Wheel Assembly, LP Turbine Rotor | 1 | |
| 256377-2 | BEARING HALF SUPPORT, ROTATING ASSEMBLY | 1 | |
| 2585565 | BEARING ASSEMBLY HOLDER | 1 | |
| 25B19270-1 | TOOL.O.RING.ASSEMBLY | 1 | |
| 25B19280 | SHAFT O RING ASSEMBLY | 1 | |
| 269A9296 | Bar Assembly, 269A5050-11 Bearing Clip Removal | 1 | |
| 282752AT1 | Bearing Assembly Tool | 1 | |
| 282952AT1 | Bearing Assembly Tool | 1 | |
| 284045-1-1 | PULLER ASSEMBLY, BEARING AND BUSHING | 1 | |
| 285160-2-1 | DUMMY BEARING CARRIER ASSEMBLY | 1 | |
| 287458-1-1 | Housing and Bearing Holder Assembly | 1 | |
| 287859-1 | Ring Assembly Drill Fixture | 1 | |
| 291270-1 | HOLDER ASSEMBLY SHAFT SPRING LOADING | 1 | |
| 291724-1 | ROTATING ASSEMBLY BALANCING SLEEVE BEARING | 1 | |
| 293176-1 | SPRING HOLDER ASSEMBLY | 1 | |
| 293406-1 | BEARING ALIGNMENT FIXTURE ASSEMBLY | 1 | |
| 294792-1 | ALIGLLINENT TOOL ASSEMBLY, BEARING HOUSING AND HOUSING AND | 1 | |
| 294879-1 | BEARING MECHANICAL PULLER (REMOVES 3822071-1 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND | 1 | |
| 294886-1 | ROTATING ASSEMBLY HOLDER (TO LOCATE INSIDE DIAMETER OF 3822065-1 SHAFT COUPLING AND SUPPORT THE ROTATING GROUP DURING SHAFT STRETCH) | 1 | |
| 294927-1 | DRIVEN COMPRESSOR HOISTING ADAPTER AND HOUSING REMOVAL (TO LIFT DRIVEN COMPRESSOR ASSEMBLY DURING MAINTENANCE OPERATIONS) | 1 | |
| 296903-1 | SPLINED HOLDER (TO ENGAGE SHAFT SPLINES DURING COMPRESSOR ASSEMBLY) | 1 | |
| 296977-1 | PILOT ASSEMBLY, SEAL AND BEARING, NUCLEUS | 1 | |
| 2C14068G02 | PUSHER, INSTALL-NO.4B&NO.4R BEARING HOUSING ASSEMBLY | 1 | |
| 2C14108G01TK | RING SET ASSEMBLY – STAGE 2 HPT NOZZLE | 1 | |
| 2C14783 | RING SET, ASSEMBLY-STG 2 HP TURB NOZZLE | 1 | |
| 2C14783G01 | RING SET, ASSEMBLY-STAGE 2 HPT NOZZLE | 1 | |
| 2C14783G02 | RING SET, ASSEMBLY - STAGE 2 HPT NOZZLE | 1 | |
| 2C6935P01 | RETAINING RING FAN FORWARD/MID SHAFT ASSEMBLY | 2 | |
| 2C8102G02 | FIXTURE, TORQUE MEASURING - VSV ASSEMBLY | 1 | |
| 2C81152P01 | RING, ASSEMBLY | 1 | |
| 2C81308P01 | RING, SUPPORT - COMBUSTOR ASSEMBLY | 1 | |
| 2C81436 | RING, ASSEMBLY STAGE 1 FWD COO | 1 | |
| 2C81436P01 | RING, ASSEMBLY STAGE 1 FORWARD | 1 | |
| 2MIT65B01503 | HEAD SPANNER WRENCH - ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 2 | |
| 2MIT65B04011-41 | SPL-644 PIN ASSEMBLY - NLG STEERING BYPASS | 15 | |
| 2MIT65B82591 | HEAD SPANNER WRENCH - ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 1 | |
| 2OHME65B40551-3 | SLING ASSEMBLY - FAIRING, SATELLITE COMMUNICATION (SATCOM) ANTENNA | 1 | |
| 2TSJ65B01503 | TEST FITTING ASSEMBLY - HYDRAULIC ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 2 | |
| 3042000AT2 | Bearing Check Assembly Tool | 1 | |
| 3545 | SPRING: FILTER ASSEMBLY, | 2 | |
| 3602 | VALVE SPRING COMPRESSOR TOOL, ENGINE CYLINDER ASSEMBLY | 1 | |
| 310100 | PPG Semco 310100 1cc Syringe Adapter Head with Hose Assembly | 1 | |
| 310300 | PPG Semco 310300 3cc Syringe Adapter Head with Hose Assembly | 1 | |
| 310600 | PPG Semco 310600 6cc Syringe Adapter Head with Hose Assembly | 1 | |
| 311000 | PPG Semco 311000 10cc Syringe Adapter Head with Hose Assembly | 1 | |
| 312000 | PPG Semco 312000 20cc Syringe Adapter Head with Hose Assembly | 1 | |
| 313500 | PPG Semco 313500 35cc Syringe Adapter Head with Hose Assembly | 1 | |
| 316000 | PPG Semco 316000 60cc Syringe Adapter Head with Hose Assembly | 1 | |
| 318200AT1-101 | RING TOOL ASSEMBLY | 1 | |
| 330A93-3412-00 | HANGER BEARING ASSEMBLY TOOL | 1 | |
| 332A93-3405-00 | SHAFT BEARING TAIL DRIVE ASSEMBLY. TOOL | 1 | |
| 332A93-3410-01 | HANGER BEARING ASSEMBLY TOO | 1 | |
| 332A93340500 | HAFT BEARING ASSEMBLY TOOL | 1 | |
| 350A93-3711-00 | BEARING ASSEMBLY | 3 | |
| 355A91-3740-01 | MAST RING ASSEMBLY | 2 | |
| 365A93-3212-20 | MGB RING ASSEMBLY DRIFT | 1 | |
| 365A93311200 | BEARING ASSEMBLY BLOCK ON ROTATING S | 1 | |
| 365A93321220 | MGB RING ASSEMBLY DRIFT | 1 | |
| 390500AT16 | ASSEMBLY TOOL, SPRING COMPRESSOR | 1 | |
| 3MIT65B00162 | LOCK ASSEMBLY - NOSE GEAR STEERING | 5 | |
| 3TSJ65B01503-1 | TEST FIXTURE - ACTUATOR ASSEMBLY, NOSE LANDING GEAR STEERING | 1 | |
| 416231 | SYRING ASSEMBLY WITH NO33CE | 1 | |
| 416232 | SYRINGE ASSEMBLY (WITH NOZZLE 20 MM (0.79 IN) | 1 | |
| 4164003-8 | ROTOR BEARING DISASSEMBLY FIXTURE (2 IT) | 1 | |
| 43100-20-2000-X | BEARING PRESS ASSEMBLY | 1 | |
| 43100-20-2002-X | BEARING ASSEMBLY FIXTURE | 1 | |
| 440-40994 | SPRING ASSEMBLY PUMP BLOCK RELIEF VALVE | 1 | |
| 460003180-24 | Keep Ring Assembly | 18 | |
| 460005224-1 | SWAGING TOOL SPHERICAL BEARING ASSEMBLY | 1 | |
| 4772-0258-000 | RING ASSEMBLY, SCRAPER (WORKSHOP) | 5 | |
| 4MIT65B01501 | DIE - BEARING STAKE, ROD END ASSEMBLY, 65B01521 AND 65B01537 | 1 | |
| 4MIT65B01503 | SOCKET - TORQUE WRENCH, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
| 5013266 | HOLDER SUBASSEMBLY,SPRING | 1 | |
| 510-010 | PIPEFITTER'S CHAIN VISE, OR OTHER HOLDING STAND- TO HOLD RESERVOIR DURING DISSASSEMBLY/ASSEMBLY (AND SAFETY) | 1 | |
| 51154AT1 | BEARING ASSEMBLY TOOL (PARKER HANNIFIN CORPORATION) | 1 | |
| 56193T4 | SPRING SEAT ASSEMBLY FIXTURE | 1 | |
| 56951A0000-01 | ASSEMBLY MEASURING FIXTURE | 1 | |
| 574121-11 | STAND (TO HOLD ECCENTRIC SETTING DURING ASSEMBLY | 1 | |
| 574125 | STAND (TO HOLD MECHANISM DURING DISASSEMBLY) | 1 | |
| 5916729-1 | NOSE GEAR TORQUE TUBE END BEARING PULLER ASSEMBLY | 4 | |
| 612115 | POSITIONER, RING ASSEMBLY | 1 | |
| 615000AF2 | Assembly Fixture, Spring | 1 | |
| 6201-FE159-5-304 | SNAP RING ASSEMBLY INSPECTION TOOL | 1 | |
| 63041006-1 | SPRING ASSEMBLY INSTALLATION TOOL | 4 | |
| 63607-FE15100001 | BEARING ASSEMBLY TOOL | 1 | |
| 63607FE15100001 | BEARING ASSEMBLY TOOL | 1 | |
| 65-44761-F12 | Bearing Assembly Fixture | 1 | |
| 6720 | RING: SNAP,ASSEMBLY, SR-125 | 2 | |
| 7821 | TOOL-HOLDING VALVE DURING ASSEMBLY | 2 | |
| 713372 | ASSEMBLY DRIFT FOR SHOULDER RING | 1 | |
| 713444 | ASSEMBLY AND CRIMPING TOOL FOR BEARING | 1 | |
| 714154 | WRENCH FOR ASSEMBLY BEARING | 1 | |
| 714164 | ASSEMBLY TOOL FOR SPRING | 1 | |
| 714390 | ASSEMBLY TOOL FOR BEARING | 1 | |
| 715649 | TOOL FOR THE ASSEMBLY OF THE FRONT BEARING | 1 | |
| 715650 | TOOL FOR THE ASSEMBLY OF THE REAR BEARING | 1 | |
| 715705 | ASSEMBLY TOOL FOR RETAINING RINGS | 1 | |
| 716180 | Assembly of Sealing Ring on Bearing | 1 | |
| 716181 | Assembly of Sealing Ring on Selector Valve | 1 | |
| 716182 | ASSEMBLY TEFLON RING ON TRANSDUCER | 1 | |
| 716297 | ASSEMBLY OF ANTI EXTRUSION RING | 2 | |
| 716451 | ASSEMBLY TOOL FOR BEARINGS | 1 | |
| 716775 | DISASSEMBLY TOOL FOR BEARING | 1 | |
| 716777 | TOOL FOR THE ASSEMBLY OF SHOULDER RING | 1 | |
| 716778 | TOOL FOR THE ASSEMBLY OF SHOULDER RING | 1 | |
| 726693 | CONE AND RING FOR SHRINKING ON ROD ASSEMBLY | 1 | |
| 726765 | CENTERING OF ACTUATOR BODY IN UNIT ASSEMBLY | 1 | |
| 727984 | ASSEMBLY BEARING PISTON | 1 | |
| 733063 | TOOL ASSEMBLY, DISASSEMBLY SPRINGS | 1 | |
| 733624 | TOOL FOR THE DISASSEMBLY OF THE BEARINGS | 1 | |
| 6796524 | PLATE - PULLER, DRIVE SHAFT ASSEMBLY BEARING INNER RACE | 2 | |
| 6796525 | DRIFT - DRIVE SHAFT ASSEMBLY BEARING INNER RACE | 2 | |
| 6797022 | PULLER - COMPRESSOR EXTENSION SHAFT BEARING HOUSING ASSEMBLY | 1 | |
| 6799518 | PULLER—GAS PRODUCER BALL BEARING LABYRINTH SEAL ASSEMBLY | 1 | |
| 6877011 | HOLDING FIXTURE, FINAL TEST HOLDS FUEL NOZZLE/COMPONENTS ON SPRAY CHAMBER DURING ASSEMBLY AND TESTING. | 1 | |
| 6877021 | SEAL FIXTURE, SECONDARY ORIFICE (WITH INLET SIMULTANEOUSLY CONNECTS METERING AND EXIT HOSE) TIP AND INLET OF FUEL NOZZLE ASSEMBLY TO PRESSURE SOURCE FOR PROOF TESTING. | 1 | |
| 6877022 | IN-PROCESS INSPECTION FIXTURE USED TO MEASURE CRITICAL DIMENSIONS DURING DISASSEMBLY AND REPAIR OPERATIONS. | 1 | |
| 6877026 | "COO WASHER ASSEMBLY/ DISASSEMBLY TOOL COMPRESSES SPRING IN CARTRIDGE VALVE FOR INSTALLATION/REMOVAL OF SLOTTED WASHER. | 1 | |
| 6893391 | BEARING PULLER TORQUEMETER PISTON ASSEMBLY. PLUG | 2 | |
| 6895538 | USED DURING ASSEMBLY OF THE TURBINE | 1 | |
| 6897105 | SEAL PLUG, CHECK VALVE SEALS CHECK VALVE BORE DURING FUEL NOZZLE ASSEMBLY TESTS. | 1 | |
| 48238075 | SPRING ASSEMBLY, UPPER | 1 | |
| 67630231 | LOCK ASSEMBLY - NOSE GEAR STEERING | 1 | |
| 450266266 | BEARING SUBASSEMBLY, MACHINED LOWER | 1 | |
| 460004629 | GUIDE - BEARING AND SEAL HOUSING ASSEMBLY | 1 | |
| 460005054 | Assembly post - banjo bolt seal fitting, steering valve | 1 | |
| 4133860070 | INSTALL THE BALL BEARING ON THE ROTOR ASSEMBLY | 1 | |
| 4610308501 | ASSEMBLY TOOL FOR BEARING | 1 | |
| 4610308511 | ASSEMBLY TOOL FOR BEARINGS | 1 | |
| 4611189522 | BEARING ASSEMBLY SUPPORT | 1 | |
| 4617001826 | BALL BEARINGS ASSEMBLY TOOL | 1 | |
| 46103085511 | ASSEMBLY TOOL FOR BEARING | 1 | |
| 6F6510G04431 | TAIL ROTOR SUPPORT BEARING (NEW TDS) ASSEMBLY/DISASSEMBLY TOOL KIT | 1 | |
| 703A95-0507-001 | ASSEMBLY OF EXTRACTING TOOLS (ICO 13-30-40-01) SECURING WASHE | 1 | |
| 762-155 | NOSE GEAR DOWNSPRING DISASSEMBLY/REASSEMBLY TOOL | 1 | |
| 79001390-1 | ASSEMBLY TOOL, O-RING | 1 | |
| 7947479-10 | AIR FORCE GENERAL PURPOSE EDDY CURRENT STANDARD. STANDARD IS A THREE (3) PLATE ASSEMBLY MEASURING 4" X 7" X 1.06". CONTAINS TWENTY (20) FASTENER HOLES WITH DIAMETERS FROM 0.156 TO 0.750", TWO (2) SCREW HOLES, AND TWO (2) DOWEL PINS HOLES. STANDARD ALSO... | 3 | |
| 7947479-10 I | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10 S | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10 Ti | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10/17-4PH | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10/304SS | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7MIT65B01500 | DIE - BEARING STAKE, ROD END ASSEMBLY 65B01513-1 AND -6 | 1 | |
| 7MIT65B01503 | TOOL INSTALLATION - CAP RING, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
| 833126-1 | BEARING ASSEMBLY FIXTURE | 1 | |
| 833565-2 | PORTABLE ENGINE STAND (TO SUPPORT ENGINE IN VARIOUS POSITIONS DURING ASSEMBLY) | 1 | |
| 833921-1 | PULLER, SUPPORT ASSEMBLY, BEARING | 1 | |
| 833943-1 | ENGINE TEST AND TRANSPORT CART ASSEMBLY - SUPPORTS APU DURING ENGINE TEST AND TRANSPORT | 1 | |
| 833980-15 | BEARING REMOVAL PLATE ASSEMBLY | 1 | |
| 833980-16 | BEARING REMOVAL PLATE ASSEMBLY | 1 | |
| 833980-16/-19 | BEARING REMOVAL PLATE ASSEMBLY | 1 | |
| 833980-17 | BEARING REMOVAL PLATE ASSEMBLY | 1 | |
| 833980-17/-18 | BEARING REMOVAL PLATE ASSEMBLY | 1 | |
| 833980-18 | BEARING REMOVAL PLATE ASSEMBLY | 1 | |
| 833980-19 | BEARING REMOVAL PLATE ASSEMBLY | 1 | |
| 833980-2 | Bearing Removal Plate Assembly | 1 | |
| 834312-1 | Bearing Removal Plate Assembly | 1 | |
| 834443-1 | FAN PULLER (SUPPORTS 3826127-1 SEAL CARRIER DURING REMOVAL OF 3611175-1 SEAL ASSEMBLY SUPERSEDES 294880-1) | 1 | |
| 834447-1 | SEAL REMOVAL FIXTURE (SUPPORTS 3810187-2 BEARING INLET HOUSING ASSEMBLY DURING REMOVAL OF 3611175-1 | 1 | |
| 834772-2 | BEARING ASSEMBLY, REMOVAL | 1 | |
| 83700157 | O-RING ASSEMBLY TOOL | 1 | |
| 856A1211G01 | Fixture, Clamping - No. 3 Bearing Assembly, Inlet Gearbox (clamping fixture) | 9 | |
| 856A1431G03 | FIIXTURE, RESTRAINING-HPT NOZZLE ASSEMB(THE RESTRAIN FIXTURE IS USED TO RESTRAIN THE NOZZLE SEGMENTS OF THE HP TURBINE NOZZLE ASSEMBLY CIRCUMFERENTIALLY DURING THE INSTALLATION OR REMOVAL FROM THE COMPRESSOR REAR FRAME (CRF) | 7 | |
| 856A1602G01 | FIXTURE, CHILL - HPT ROTOR BLADE AFT BLADE RETAINER (CHILL FIXTURE) THE CHILL FIXTURE IS USED TO HOLD DRY ICE AGAINST THE AFT HPT ROTOR DISK BLADE RETAINER, DURING DISASSEMBLY, TO RELEASE THE INTERFERENCE FIT BETWEEN THE RETAINER AND THE HPT DISK | 6 | |
| 856A2335G02 | Stool Assembly/Dissassembly #1&2 Bearing | 5 | |
| 856A2367G01 | RING, TORQUE DISTRIBUTION - ASSEMBLY OF LPT ROTOR (TORQUE DISTRIBUTION RING) | 1 | |
| 856A2374G02 | FOR BEARING 5 DISASSEMBLY | 6 | |
| 856A2388G01 | Ring, Assembly/Disassembly | 1 | |
| 856A2640 | TOOL SET ASSEMBLY - RING OIL SEPARATOR (TOOL SET) | 1 | |
| 856A2640 G01 | Tool Set Assembly ‐ Ring Oil Separator | 8 | |
| 856A2640G01 | Tool Set Assembly - Ring Oil Separator (tool set) | 8 | |
| 856A2792 | PULLER - CONTROL ALTERNATOR BEARING HOUSING AND GEARSHAFT ASSEMBLY (PULLER) | 1 | |
| 856A2792G01 | PULLER - CONTROL ALTERNATOR BEARING HOUSING AND GEARSHAFT ASSEMBLY (PULLER) | 5 | |
| 856A2956 | ASSISTANCE TOOL THE RING FAN ASSEMBLY | 2 | |
| 856A2956G01 | ASSISTANCE TOOL THE RING FAN ASSEMBLY | 16 | |
| 856A3260G02 | FOR BEARING 5 DISASSEMBLY | 10 | |
| 856A3573G03 | STOOL, ASSY/DISASSY - NO. 1 AND NO. 2 BEARING SUPPORT (ASSEMBLY/DISASSEMBLY STOOL) | 13 | |
| 856A3754 | RINGS, ASSEMBLY/DISASSEMBLY - LPT COOLING MANIFOLDS (ASSY/DISASSEMBLY RINGS) | 1 | |
| 856A3754G01 | Rings, Assembly/Disassembly - LPT Cooling Manifolds (assy/disassembly rings) | 4 | |
| 856A3794G01 | RING, HOLDING 2EACH(TO HOLD THE STAGE 1 OUTER STATIONARY AIR SEAL AND SHROUD SUPPORT ASSEMBLY DURING TRANSPORTATION OF THE LPT) | 9 | |
| 856A3913 | FIXT, CHECK ASSEMBLY TRF / 5 BEARING SUPPORT | 1 | |
| 856A3913G01 | Fixture, Checking - Assembly/TRF with No. 5 Bearing Support | 2 | |
| 856A3913G02 | FIXT, CHECK ASSEMBLY TRF / 5 BEARING SUPPORT | 1 | |
| 856A3913G03 | FIXT, CHECK ASSEMBLY TRF / 5 BEARING SUPPORT | 6 | |
| 8574813 | Fixture – Assembly, Housing Bearing | 1 | |
| 881600AT4 | O-RING ASSEMBLY BULLET | 1 | |
| 8C2501 | STAND ASSEMBLY/DISASSEMBLY NO. 1 BEARING | 1 | |
| 8C2508 | NO. 1 BEARING ASSEMBLY GUIDE | 1 | |
| 8C2531 | STAND, ASSEMBLY/DISASSEMBLY NO. 2 BEARING HOUSING | 1 | |
| 8MIT65B01503 | TOOL, COMPRESSION - CAP RING, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
| 9316874 | SPRING HOUSING ASSEMBLY FOR S-MP-3(U8010011), S-MP-3L (U8770345), S-MP-4 (U8010015) AND S-MP-4L (U87 | 1 | |
| 8813959000 | LOCKING TOOL AND CENTERING WRENCH ASSEMBLY | 1 | |
| 8816968000 | PERMEABILITY MEASURING TOOL,ASSEMBLY | 6 | |
| 8817489000 | MEASURING ASSEMBLY | 1 | |
| 933A304-1 | ASSEMBLY TOOL, O'RING | 1 | |
| 934826-1 | Bearing Removal Adapter Assembly | 1 | |
| 946F786-3 | PRINTED WIRING ASSEMBLY | 1 | |
| 946F787-2 | PRINTED WIRING ASSEMBLY | 1 | |
| 947F456-1 | PRINTED WIRING ASSEMBLY | 1 | |
| 95-92020-0001 | LANDING GEAR RINGGING ASSEMBLY | 1 | |
| 956A3039 | PULLER - ASSEMBLY-NO. 4 BEARING FWD ROTATING OIL SEAL | 1 | |
| 956A3552 | OUTER BEARING ASSEMBLY TOOL | 1 | |
| 956A6337G01 | FIXTURE, ASSEMBLY - LOCKING RING | 1 | |
| 956A6637 | FIXTURE - ASSEMBLY - LOCKING RING | 1 | |
| 956A6637G01 | FIXTURE, ASSEMBLY - LOCKING RING | 2 | |
| 956A6637G02 | FIXTURE, ASSEMBLY - LOCKING RING | 3 | |
| 956A6802 | TABLE FOR SUPPORT BEARING 2 ASSEMBLY | 1 | |
| 956A6804 | FIXTURE FOR SUPPORT BEARING 1 ASSEMBLY WITH BEARING 1 | 1 | |
| 956A6837 | HEATER - ASSEMBLY - BEARING 2 | 1 | |
| 956A8492 | FIXTURE - ASSEMBLY STAND - NO.5 BEARING SUPPORT | 1 | |
| 956A8609 | KIT FIXTURE - ASSEMBLY LOCKING RING | 1 | |
| 956A8835 | HEATER - ASSEMBLY - BEARING 2 | 1 | |
| 97A27902016000 | SPRING SCALE ASSEMBLY | 9 | |
| 98A27504003000 | EXTRACTOR - BEARING ASSEMBLY, FLAP TRACK NO.2, FORWARD MOUNTING | 6 | |
| 98A27504004000 | EXTRACTOR - BEARING ASSEMBLY, FLAP TRACKS 3, 4 AND 5, FORWARD MOUNTING | 4 | |
| 98A27504005000 | EXTRACTOR - BEARING ASSEMBLY, FLAP NO.6, FORWARD MOUNTING | 6 | |
| 98D07203003040 | SHORING ASSEMBLY | 3 | |
| 98D07203003042 | SHORING ASSEMBLY | 3 | |
| 98D07203003044 | SHORING ASSEMBLY | 1 | |
| 98F05003000002 | Measuring target centror assembly | 6 | |
| 98V27309007000 | Elevator optical centering assembly | 4 | |
| 9988100-3 | *DATA MONITOR TO B/H WIRING ASSEMBLY | 1 | |
| 9C2063 | ASSEMBLY/DISASSEMBLY DAMPER RING - HORIZ. AXIS. | 1 | |
| 9C2365 | FIXTURE, HANDLING BEARING ASSEMBLY NO 2 | 1 | |
| 9MIT65B01231-1 | ASSEMBLY GUIDE - METERING ROD, INNER CYLINDER, BODY LANDING GEAR | 1 | |
| A27027-42 | Hoist Ring Assembly | 1 | |
| A27027-43 | Hoist Ring Assembly | 1 | |
| A27070-66 | BEARING PULLER ASSEMBLY | 1 | |
| A27071-4 | RING BRACKET ASSEMBLY | 1 | |
| A32042-1 | FIXTURE - FUNCTIONAL TEST, SIDE STRUT SPRING ASSEMBLY | 1 | |
| A330-92396-0001 | POD REAR FAIRING SUPPORT WEDGE ASSEMBLY | 1 | |
| A685201 | RING ASSEMBLY TOOL | 1 | |
| A685201 PM | RINGASSEMBLYTOOL | 1 | |
| A71036-1 | MONITORING ASSEMBLY - BREATHER PRESSURE, JT9D-7R4 ENGINE | 1 | |
| AC21917020 | SWAGING TOOL FOR SPHERICAL BEARING ASSEMBLY | 1 | |
| AFNDT-3290AL | Custom ST Aerospace Engineering Multi-Hole Standard 2 Plate Assembly, Manufactured to the Customer Supplied Drawing Specifications . Material: 7075-T6 Aluminum. 6 Total Hole Sizes to be determined. Includes Test Report and Certificate of Conformance. | 1 | |
| AGE-02072-401 | SPRING ASSEMBLY | 1 | |
| AGE-10049 | DRIVER, BEARING ASSEMBLY | 2 | |
| AGE10049 | Bearing Assembly Fixture | 2 | |
| AGE10049 (FBS-30129) | Bearing Assembly Fixture | 1 | |
| AGE10165 | BEARING PULLER FIXTURE ASSEMBLY | 1 | |
| AGE10378 | BEARING PULLER ASSEMBLY | 2 | |
| AGE11640 | PULLER ASSEMBLY, BEARING | 2 | |
| AGE13296 | FACE SEAL & MATING RING PULLER ASSEMBLY | 1 | |
| AGE13300 | FACE SEAL & MATING RING PULLER ASSEMBLY | 1 | |
| AGE13984 | PULLER ASSEMBLY , BEARING | 2 | |
| AGE14035 | ASSEMBLY, BEARING DRIVER | 2 | |
| AGE14898 | ASSEMBLY, BEARING PULLER | 1 | |
| AGE15828 | ASSEMBLY TOOL, RETAINING RING | 1 | |
| AGE16152 | PRINTED WIRING ASSEMBLY, MEZZANINE-GCU | 1 | |
| AGE16276 | FIXTURE, SPRING ASSEMBLY | 1 | |
| AGE16568 | FIXTURE DISASSEMBLY, FEATHERING ASSEMBLY | 1 | |
| AGE70459-27 | RING PIN ASSEMBLY | 1 | |
| AGE70499 | ASSEMBLY BULLET BEARING RACE | 1 | |
| AGEI0049 | DRIVER, BEARING ASSEMBLY | 1 | |
| AID-00874 | Rotor disassembly aid (bearing puller) | 1 | |
| AID-00874 | ROTOR DISASSEMBLY AID (BEARING PULLER) | 1 | |
| AID-01183 | CONTAINMENT RING ASSEMBLY | 1 | |
| ARP-1000 | BOEING SPECIAL RING PROBE ASSEMBLY | 1 | |
| AS350.000.045 | DISASSEMBLY / ASSEMBLY - SPRING ANTI-VIBRATOR - MAIN ROTOR HUB | 1 | |
| ASS-01390 | ASSEMBLY BULLET BEARING RACE | 1 | |
| AT 55122 | NLG Shock Strut Bearing Assembly Tool | 3 | |
| AT 55131 | MLG Shock Strut Bearing Assembly Tool | 1 | |
| AT 56658 | ASSEMBLY TOOL, SPACER RING | 4 | |
| AT-56005 | SPRING ASSEMBLY REMOVAL TOOL - NLG | 1 | |
| AT-74276 | Bullet, Torsion Spring Retainer Assembly | 1 | |
| AT55122 | NLG SHOCK-STRUT BEARING ASSEMBLY TOOL | 3 | |
| AT55131 | MLG SHOCK STRUT BEARING ASSEMBLY TOOL | 1 | |
| AT55131ADLMRO | MLG SHOCK-STRUT BEARING ASSEMBLY TOOL | 1 | |
| AT55769-102 | TOOL-ASSEMBLY,RETAINER RING | 1 | |
| AT56005-1 | SPRING ASSEMBLY REMOVAL TOOL - NLG | 1 | |
| AT56356 | PINTLE-AFT,SPHERICAL BEARING ASSEMBLY TOOL | 1 | |
| AT56658 | ASSEMBLY TOOL, SPACER RING | 4 | |
| AT65-44835 | Bearing Assembly Fixture | 1 | |
| AT65-44835PM | BEARING ASSEMBLY FIXTURE - INSTALLING BEARINGS FOR INPUT SHAFT ASSEMBLY AT65-44835 | 1 | |
| B1316-01410 | FILTERING ASSEMBLY | 1 | |
| B27021-9 | Hoist Ring Assembly | 1 | |
| B32019-1 | THIS STRAP ASSEMBLY IS USED TO LOCK THE NLG SHOCK STRUT INTO A DEPRESSURIZED POSITION DURING GROUNDMAINTENANCE OPERATIONS. | 11 | |
| B78013-4 | SPRING COMPRESSOR ASSEMBLY | 2 | |
| B78017-1 | Installation Equipment - Bearing - Lead Screw, Thrust Reverser Non-Locking Actuator Assembly | 9 | |
| BOF65B07950 | BORING FIXTURE - TRUNNION FITTING ASSEMBLY, NOSE LANDING GEAR | 1 | |
| BOF767LS311T4185 | BORING FIXTURE LOWER SPAR FITTING ASSEMBLY | 1 | |
| BOFAOGTOOL747LG0013 | BORING FIXTURE FITTING ASSEMBLY - TRUNNION, NOSE LANDING GEAR | 1 | |
| C20001-1 | Roller Swage - Bearing Installation, Elevator Tab Control Crank Assembly | 2 | |
| C24008-1 | Breakout Box -P5-13 Processor Printed Wiring Assembly | 1 | |
| C27005-1 | Assembly Fixture - Elevator Feel and Centering Unit | 1 | |
| C27005-19 | Assembly Fixture - Elevator Feel and Centering Unit | 3 | |
| C27086-1 | Spring Removal/Installation Equipment - Elevator Tab Mechanism Assembly | 13 | |
| C27086-27 | SPRING REMOVAL/INSTALLATION - ELEVATOR TAB MECHANISM ASSEMBLY | 7 | |
| C32015-1 | MAIN LANDING GEAR FORWARD TRUNNION BEARING ASSEMBLY REMOVAL | 14 | |
| C32016-35 | Centering Assembly | 7 | |
| C32016-40 | CENTERING ASSEMBLY | 1 | |
| C32017-47 | O-Ring Assembly | 2 | |
| C32017-6 | Scraper Ring Guide Assembly | 1 | |
| C32035-4 | Ring Guide Assembly | 1 | |
| C32042-5 | Metering Pin Puller Assembly | 2 | |
| C32042-5PM | METERING PIN PULLER ASSEMBLY | 1 | |
| C32055-1 | Clamp Assembly - Steering Cables, Nose Landing Gear | 7 | |
| C32055-18 | CLAMP ASSEMBLY - STEERING CABLES, NOSE LANDING GEAR | 8 | |
| CAT4599−6B | Assembly Bushing − NLG Bearing/Piston Ring 32−21−09 | 1 | |
| CAT5612-3E | SPRING PULLER ASSEMBLY TOOL | 1 | |
| CAT5616-15 | TOOL-LOWER BEARING ASSEMBLY | 1 | |
| CAT5616-15D | LOWER BEARING ASSEMBLY TOOL | 1 | |
| CF65B82106 | SPRING CHECKING FIXTURE - LOAD LIMITER ASSEMBLY, AILERON CONTROL | 1 | |
| CH1057-062 | BEARING ASSEMBLY TOOL | 1 | |
| CH139085 | BEARING ASSEMBLY TOOL | 1 | |
| CH705-1015 | BEARING ASSEMBLY PUNCH | 1 | |
| CH712-173 | BEARING ASSEMBLY TOOL | 1 | |
| CHA1057-062 | BEARING ASSEMBLY TOOL | 1 | |
| CHA1057-066 | BEARING ASSEMBLY | 1 | |
| CHA1057-182 | BEARING ASSEMBLY | 1 | |
| CHA141026 | CLIP-SPRING ASSEMBLY | 3 | |
| CHA1716-0292 | SPRING ASSEMBLY TOOL | 1 | |
| CHA712-173 | BEARING ASSEMBLY TOOL | 1 | |
| CHA713-172 | BEARING ASSEMBLY TOOL | 1 | |
| CHA713-211 | BEARING ASSEMBLY TOOL | 1 | |
| CHA723-860 | BEARING ASSEMBLY | 1 | |
| CHA723-864 | BEARING ASSEMBLY TOOL | 1 | |
| CHA723-867 | BEARING ASSEMBLY TOOL | 1 | |
| CHA723-873 | BEARING ASSEMBLY TOOL | 1 | |
| CP26229 | REAR SUPPORT RING ASSEMBLY | 1 | |
| CP6862AR-2 | ASSEMBLY BEARING | 1 | |
| CT9050-110 | RING GEAR ASSEMBLY | 1 | |
| DAPT60-0182-00 | BEARING RACE ASSEMBLY TOOL | 1 | |
| DAPT60-0197-00 | BEARING DICE ASSEMBLY TOOL | 3 | |
| DAPT60-0197-00-IAS | BEARING RACE ASSEMBLY TOOL | 1 | |
| DAPT60-0392-00 | BEARING OUTER RACE PISTON KIT (DISASSEMBLY) | 1 | |
| DAPT60-0394-00 | BEARING OUTER RACE PISTON KIT(ASSEMBLY) | 2 | |
| DRP13 | DANIELS MANUF CORP DRP13 BACKSHELL ASSEMBLY PLIERS, CIRCULAR RING, 0.85" TO 0.88" GRIP, RED | 2 | |
| DRT69816 | PISTON RING ASSEMBLY SLEEVE | 1 | |
| DZZ7179-503 | 1.ASSEMBLY - BEARING (DZZ7179-201 INCLUDED INDZZ7179-503) | 1 | |
| E 51417 | SPRING ASSEMBLY & DISASSEMBLY FIXTURE | 1 | |
| ES753-1TA | BEARING NEEDLE TOOL ASSEMBLY | 1 | |
| ES753-1TD | BEARING NEEDLE TOOL DISASSEMBLY | 1 | |
| F2661000 | PISTON CONTER RING ASSEMBLY TOOL | 1 | |
| F2669100 | LINER BACK-UP RING ASSEMBLY TOOL | 1 | |
| F26691000 | PISTON BACK-UP RING ASSEMBLY TOOL | 3 | |
| F26691000 AMDT A | PISTON CONTER RING ASSEMBLY TOOL | 1 | |
| F26691000-1 | PISTON CONTER RING ASSEMBLY TOOL | 6 | |
| F26692000 | PISTON CONTER RING ASSEMBLY TOOL | 6 | |
| F27271000 | BEARING CUP REMOVAL / ASSEMBLY TOOL | 2 | |
| F27272000 | TOOL, BEARING CUP ASSEMBLY/REMOVAL | 2 | |
| F27536000 | TOOL ASSEMBLY MLG BEARING | 2 | |
| F28092000 | TOOL FOR HANDING THE MAIN LANDING GEAR WHEEL ASSEMBLY DURING THE DISASSEMBLY AND ASSEMBLY | 2 | |
| F70150 | PULLER ASSEMBLY - CONTROL ACTUATOR BEARING | 1 | |
| F72735-13 | Lockout Pin Assembly - Nose Wheel Steering | 24 | |
| F72780 | FITTING ASSEMBLY -0 NOSE MOORING USED TO MOOR | 1 | |
| F72813 | TOOL ASSEMBLY -0 BEARING STAKING TO STAKE BAC- | 1 | |
| F72813-1 | BEARING STAKING TOOL ASSEMBLY | 1 | |
| F72819 | BEARING PULLER ASSEMBLY USED TO REMOVE BEARINGS | 1 | |
| F72819-1 | Bearing puller assembly | 4 | |
| F72820 | BEARING PULLER ASSEMBLY USED TO REMOVE BEARINGS | 1 | |
| F72820-1 | BEARING PULLER ASSEMBLY | 1 | |
| F72822 | MANDREL ASSEMBLY -0 BEARING SWAGING TO SWAGE THE | 1 | |
| F72916-1 | ROLLER SWAGING ASSEMBLY - BEARING HOUSING CONTROL CRANK | 2 | |
| F80065-1 | Spring Compressor Assembly - Flap Asymmetry Mechanism | 2 | |
| F80096-4 | Holding Fixture Assembly - Forward Trunnion Bearing Housing | 10 | |
| F80096-7 | Holding Fixture Assembly - Forward Trunnion Bearing Housing | 6 | |
| F80118-5 | BEARING RETENTION/REMOVAL BODY ASSEMBLY (ACCESSORY TO F80118-1 KIT) | 1 | |
| F80163-1 | Expander Assembly -Tension Spring. Nose Gear Gravel Deflector | 5 | |
| F80226-1 | FITTING ASSEMBLY - NOSE MOORING | 2 | |
| F80226-1 -3 | Fitting Assembly -Nose Mooring | 1 | |
| F80226-3 | FITTING ASSEMBLY - NOSE MOORING | 4 | |
| FBS-30129 | Bearing Assembly Fixture | 1 | |
| FDOO01-35-42000-000 | To align barrel assy and end fitting (9-250) during assembly | 1 | |
| G32019-1 | ROLLER SWAGING EQUIPMENT - OUTBOARD TRUNNION BEARING ASSEMBLY, MAIN LANDING GEAR | 1 | |
| G32021-11 | Spring clip Assembly | 1 | |
| G32072-1 | SPL-644 PIN ASSEMBLY - NLG STEERING BYPASS | 6 | |
| G32078-1 | CLAMP ASSEMBLY - NOSE GEAR STEERING | 6 | |
| GS14550-1 | Spring Assembly Compressor | 2 | |
| GS15848-1 | HOLD THE PROPELLER DURING DISASSEMBLY, ASSEMBLY AND TEST | 8 | |
| GS19817-1 | WITH GS20876-1, TO SECURE YOKE DURING DISASSEMBLY AND ASSEMBLY | 3 | |
| GS19821-1 | EXPAND THE ACTUATOR SEAL DURING ASSEMBLY | 2 | |
| GSE56082 | Aft pintle spherical bearing assembly nut wrench | 1 | |
| GSE56509 | Aft pintle spherical bearing assembly removal tool | 1 | |
| GT996521 | Roll Swage Tool − Bearing Assembly | 1 | |
| GTN358000-4 | FLARING NOSE ASSEMBLY | 1 | |
| H150-3300-1 | STEERING ARM ASSEMBLY | 1 | |
| H150-3300-2 | STEERING ARM ASSEMBLY | 1 | |
| H150-3300-4 | STEERING ARM ASSEMBLY | 1 | |
| H150-3300-5 | STEERING ARM ASSEMBLY | 1 | |
| H150E-3500-1 | STEERING ASSEMBLY | 1 | |
| H150E-3500-2 | STEERING ASSEMBLY | 1 | |
| H150E-3500-3 | STEERING ASSEMBLY | 1 | |
| H250-3300-1 | STEERING ASSEMBLY | 1 | |
| H250-3300-2 | STEERING ARM ASSEMBLY | 1 | |
| H250E-2010-1 | STEERING MOUNT ASSEMBLY | 1 | |
| HC523H0587-000 | SPRING ASSEMBLY | 1 | |
| HS8962 | SLIP RING ASSEMBLY ADAPTOR | 2 | |
| HU19248 | BEARING ASSEMBLY | 1 | |
| J23004-1 | CABLE ASSEMBLY - CABIN VIDEO MONITORING SYSTEM (CVMS), P56 PANEL | 2 | |
| J23004-58 | CABLE ASSEMBLY - CABIN VIDEO MONITORING SYSTEM (CVMS), P56 PANEL | 1 | |
| J32009-30 | THREAD PROTECTOR RETAINING RING ASSEMBLY | 1 | |
| J32009-47 | CENTERING CAM LOCK ASSEMBLY | 1 | |
| J32009-6 | CENTERING CAM LOCK ASSEMBLY | 1 | |
| J32014-33 | Grand nut Scraper Ring Retainer Assembly | 1 | |
| J32014-90 | Centering Block Assembly | 1 | |
| J32037-111 | SPRING ASSEMBLY-SPRING R/I EQPT MLG & NLG | 2 | |
| J32067-2 | LANDING GEAR SPRINGS ASSEMBLY FUNCTIONAL TEST, | 1 | |
| J32067-47 | LANDING GEAR SPRINGS ASSEMBLY FUNCTIONAL TEST | 1 | |
| J32075-8 | SPRING COMPRESSOR ASSEMBLY | 1 | |
| J32082-2 | GLAND NUT SCRAPER RING RETAINER ASSEMBLY | 1 | |
| J32082-9 | O-RING INSERTER ASSEMBLY | 1 | |
| J32083-64 | Orifice Support Assembly Retainer Ring Sizer | 2 | |
| J47097 | ASSEMBLY CONE FOR GUIDE RINGS | 2 | |
| K-2306 | KIT, REPL. BEARING ASSEMBLY | 2 | |
| K-5456 | BEARING CAP ASSEMBLY | 1 | |
| K0654 | BEARING SUBASSEMBLY, MACHINED LOWER | 1 | |
| K3485 | BEARING CAP ASSEMBLY KIT - PLEASE SEE OH KIT PRICE | 6 | |
| K3630 | Bearing Cap Assembly Kit | 2 | |
| LLA799A001 | SETTING RING ASSEMBLY | 2 | |
| LLA800A070 | SETTING RING ASSEMBLY | 1 | |
| LLA954A074 | WIRE RING ASSEMBLY TOOL | 1 | |
| LTCT13803 | Damping Ring, Compressor Rotor Assembly | 1 | |
| LTCT14684-01 | Pusher Assembly, No. 1 Bearing Retainer | 1 | |
| LTCT14759-01 | Tool Assembly, No. 1 Bearing and Housing, and No. 1 Seal Installation | 1 | |
| LTCT14763-01 | Puller Assembly, Mechanical, No. 1 Bearing and Housing | 1 | |
| LTCT14796-01 | Fan Bearing Dowel Support Assembly Pins | 1 | |
| LTCT25548-01 | Fairing Assembly, Referee Nozzle and Core Cowl | 1 | |
| LTCT25555-01 | Fitting Assembly, No. 4/5 Bearing Scavenge Temperature/Pressure | 1 | |
| LTCT4968-01 | Tool Assembly, No. 2 Bearing Package Installation | 2 | |
| LTCT5236-01 | Puller Assembly, Mechanical No. 1 Bearing Aft Inner Race | 1 | |
| LTCT5970-01 | Staking Tool Assembly, Ring Gear Lock Cup | 1 | |
| LTCT6056-01 | Puller Assembly, Mechanical, Bearing No. 1 | 1 | |
| LTCT7534-01 | Unlocking Tool Assembly, Ring Gear Lock Cup | 1 | |
| M.DX7061N2-0 | HOLDING FIXTURE TO HOLD THE MANIFOLD ASSEMBLY DURING ASSEMBLY/ DISASSEMBLY | 1 | |
| M0NT24059 | MANDREL FOR ASSEMBLY OF BEARINGS | 1 | |
| M0NT24060 | MANDREL FOR ASSEMBLY OF BEARINGS | 1 | |
| M0NT716182 | ASSEMBLY TEFLON RING TRANSDUCER | 1 | |
| M0NT733063 | TOOL ASSEMBLY, DISASSEMBLY SPRINGS | 1 | |
| M11029-2 | CORD (HEAVING RING AND LINE ASSEMBLY) | 1 | |
| M46347 | TOOL TO HOLD THE LOCK ASSEMBLY DURING INSTALLATION OF THE TARGETS | 2 | |
| M65725909 | BEARING ASSEMBLY TOOL | 1 | |
| M65725915 | BEARING ASSEMBLY TOOL | 1 | |
| MA280043-1 | AFT LOWER LOBE FLOORING ASSEMBLY | 1 | |
| MIT65B01503 | ADAPTER - TORQUE WRENCH, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 1 | |
| MIT65B01562 | LOCK ASSEMBLY - NOSE GEAR STEERING | 2 | |
| MIT65B04252-1 | KEEPER - COMPRESSION SPRING ASSEMBLY, BULK CARGO DOOR LATCH | 1 | |
| MIT65B09877-1 | ASSEMBLY TOOL - SPRING CARTRIDGE, BULK CARGO DOOR | 2 | |
| MRO608C3103 | SPL-15028 - ASSEMBLY TOOL - SPRING CLAMP, AUTO RESTOW | 1 | |
| MS16633-2018 | RETAINING RING ([3] REQUIRED FOR REMOVAL OR INSTALLATION OF COLLECTIVE SPRING ASSEMBLY. | 1 | |
| MSE-66A | PLIERS, INSTALL AND REMOVE, RETAINING RING - FAN FORWARD AND MID SHAFT ASSEMBLY | 3 | |
| MSE80-200203 | AGT RING SEAL ASSEMBLY | 1 | |
| MT091-1 | ENGINE RING GEAR HOLDER ASSEMBLY | 3 | |
| NRK-3S/400SS | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 400 Stainless Steel. 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for | 1 | |
| NRK-3S/HX | CUSTOM NAVY EDDY CURRENT BLOCK. Material: Hastelloy X, 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all notc | 1 | |
| NRK-3ST | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 4340 Cres Steel. 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all | 1 | |
| NRK-3T | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 6AL-4V Titanium 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all n | 1 | |
| NTS9162 | EXTRACTING AND ASSEMBLY BEARING | 1 | |
| NTS9163 | EXTRACTING AND ASSEMBLY BEARING | 1 | |
| OHME65B00002 | SLING ASSEMBLY - TETHERING/LIFTING, AIRPLANE RECOVERY | 1 | |
| OHME65B01519-1 | OVERHEAD EQUIPMENT SLING - ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
| ORT1125 | O−RING ASSEMBLY TOOL | 3 | |
| OU145048 | Ball Bearing Assembly tool | 1 | |
| OU145761 | Ball Bearing Assembly tool | 1 | |
| P2A1100 | BEARING ASSEMBLY | 3 | |
| PPFC-1H | ASSEMBLY - HEAD/CYLINDER, CRIMPING TOOL. (DANIELS MANUFACTURING CORPORATION) | 4 | |
| PWA 103115 | HEATER, ELECTRICAL - HPC, NO. 2 BEARING AND SUPPORT ASSEMBLY | 1 | |
| PWA 105310 | CRADLE, HANDLING − ENGINE ASSEMBLY, FUEL PUMP AND FUEL METERING UNIT (REPLACES | 1 | |
| PWA 85196 | RING, RETAINING - HPC ROTOR ASSEMBLY; SIXTH STAGE BLADE | 1 | |
| PWA 85197 | RING, RETAINING - HPC ROTOR ASSEMBLY; SEVENTH STAGE BLADE | 1 | |
| PWA 85198 | RING, RETAINING - HPC ROTOR ASSEMBLY; EIGHT STAGE BLADE | 1 | |
| PWA102419 | DRIFT - DISASSEMBLY, GEARBOX, ROLLER BEARING INNER RACE, STARTER (FRONT) | 1 | |
| PWA103718 | PROBE ASSEMBLY & VIDEO MONITORING | 2 | |
| PWA105707 | RING,LIFT AND TURN-ENGINE ASSEMBLY FAN CASE UNIT,FRONT | 1 | |
| PWA105905 | PLIERS, ASSEMBLY (ACC SPRING) | 1 | |
| PWA12126 | BASE-DISASSEMBLY ACCESS DRIVE GEAR,ROLLER BEARING | 2 | |
| PWA29647 | FIXTURE - SEAL ASSEMBLY, N1 & 2 BEARING_[PWA29647] | 2 | |
| PWA80811-8 | FIXTURE, ASSEMBLY-NO.1 BEARING SHOULDER STUDS | 1 | |
| PWA85036 | AIRFLOW CHECK NO. 1 BEARING (CARBON) SEAL ASSEMBLY | 1 | |
| PWA85267 | BASE ASSEMBLY GEARBOX ROLLER BEARING INNER RACE | 1 | |
| PWA85274 | PLATE - DISASSEMBLY, GEARBOX ROLLER BEARING INNER RACE, PMA | 1 | |
| PWA85279 | DRIFT - DISASSEMBLY, GEARBOX, ROLLER BEARING INNER RACE, DEOILER (FRONT) | 1 | |
| PWA86345 | PLATE - DISASSEMBLY, GEARBOX, ROLLER BEARING INNER RACE (VARIOUS) | 1 | |
| PWA88021 | CASCADE RING FITTING ASSEMBLY TOOL | 1 | |
| PWA88683 | BASE-ASSEMBLY GEARBOX ROLLER BEARING INNER RACE | 1 | |
| PWC30766 | TOOL, ASSEMBLY, FUEL NOZZLE STRAINER RETAINING RING | 3 | |
| PWC50085 | BASE VANE RING ASSEMBLY | 4 | |
| PWC70574 | RING ASSEMBLY, RING | 1 | |
| Q46679 | TORQUE ADAPTER FOR SPHERICAL BEARING ASSEMBLY | 1 | |
| Q46682 | TORQUE ADAPTER FOR SPHERICAL BEARING ASSEMBLY | 1 | |
| Q46998 | SPANNER FOR SPHERICAL BEARING ASSEMBLY | 1 | |
| RB 92700-10302-041 | LIFT RING ASSEMBLY | 2 | |
| RB T101366 | Bearing Removal Generator Quill Transmission Plate Assembly | 1 | |
| RB T101446 | Quill Transmission Plate Assembly Bearing & Nut Removal | 1 | |
| RB T101519 | PLATE ASSEMBLY, ROTOR BRAKE BEARING | 3 | |
| RB T101530-3 | BEARING ROLL STAKE TOOL ASSEMBLY | 2 | |
| RB T101530-5 | BEARING ROLL STAKE TOOL ASSEMBLY | 2 | |
| RB T101591 | Bearing Removal Plate Assembly | 1 | |
| RB T101731 | Bearing Install Or Removal Lower Plntry Assembly Tool Set | 1 | |
| RB T101953 | Bearing Removal Tail Rotor Shaft Plate Assembly | 1 | |
| RB T102061 | Bearing Installation Quill Assembly Push Bar | 1 | |
| RB T102062 | Bearing Quill Assembly Removal Bar | 1 | |
| RB T102063 | Bearing Gear Installation Support Assembly | 1 | |
| RB T102074 | PULLER ASSEMBLY - BEARING | 2 | |
| RB T102075 | Mast Bearing Install & Removal Plate Assembly | 1 | |
| RB T102085 | Bearing Removal & Anti Torque Device Plate Assembly | 1 | |
| RB T102092 | Bearing Puller Assembly | 1 | |
| RB T103002 | Wrench Assembly, Input Bearing Nut | 1 | |
| RB T103177-101 | 3 Jaw Puller Assembly, Planetary Bearing | 1 | |
| RB T103187 | Combining Gear Box Bearing Puller Assembly | 1 | |
| RB T103212-101 | Bearing & Jet Assembly Puller Assembly | 1 | |
| RB T103266-101 | Transmission Assembly Bearing Removal/Install Tool | 1 | |
| RB T103324-101 | DRIVER BEARING REMOVAL FREEWHEELING ASSEMBLY | 2 | |
| RB T103331-101 | DRIVER BEARING REMOVAL FREEWHEELING ASSEMBLY | 2 | |
| RB T103332-101 | SLEEVE, BEARING INSTALLATION FREEWHEELING ASSEMBLY | 3 | |
| RB T103333-101 | SLEEVE BEARING INSTALLATION FREEWHEELING ASSEMBLY | 2 | |
| RB T103361-101 | Bearing Staking Tool Assembly | 1 | |
| RB0006-809-00698 | Outer Race Bearing Retrac. & Assembly Tools | 1 | |
| RB6798982 | Planetary Gear & Bearing Assembly Wrench & Holder | 1 | |
| RB6893391 | Bearing Puller Torquemeter Piston Assembly. Plug | 2 | |
| RB6895538 | USED DURING ASSEMBLY OF THE TURBINE | 2 | |
| RB877206-12-2 | Bearing Cutting Tool Assembly | 1 | |
| RB877206-18-2 | Bearing Cutting Tool Assembly | 1 | |
| RB877206-5-2 | Bearing Cutter Tool Assembly | 1 | |
| RBE105-14181W1 | NEEDLE BEARINGS ASSEMBLY FIXTURE | 3 | |
| RBE332A93-3405-00 | Shaft Bearing Tail Drive Assembly. Tool | 2 | |
| RBH9926 | Main Transmission Bearing Inner Race Assembly Tool, "C" Model | 1 | |
| RBT101655-101P | RING STAKE TOOL ASSEMBLY | 1 | |
| RBT102074 | PULLER ASSEMBLY, BEARING | 2 | |
| RBT18503 | Bullet for Restraint Spring Assembly | 2 | |
| RBW109-3101-86-101 | Tool Assembly, Floating Ring Centering | 2 | |
| RBW109-3130-53-111 | Tail Rotor Ring Nut Tool Removal Assembly | 2 | |
| RBW109-3130-54-111 | Tail Rotor Ring Nut Removal Tool Assembly | 2 | |
| RBW6510A00436W142B-3T | Bearing Assembly Press/Support Tool | 1 | |
| RBW6510G04431-6F | TAIL ROTOR SUPPORT BEARING (NEW TDS) ASSEMBLY/DISASSEMBLY TOOL KIT | 2 | |
| RBW895-3101-25-101 | Tool Assembly, Bearing Staking | 1 | |
| RBW895-3101-26-101 | Tool Assembly, Bearing Installation | 1 | |
| RBW895-3101-27-101 | Tool Assembly, Bearing Test | 1 | |
| RRT028625 | ASSEMBLY - SUPPORT RING | 1 | |
| RRT052797 | BRACKET - SUPPORT FUEL MANIFOLD ASSEMBLY DURING BUILD/MAITENANCE | 1 | |
| RRT104638 | ASSEMBLY TOOL - INSTALLATION / REMOVAL OF LOWER SPLITTER FAIRING. | 1 | |
| RSE1220 | ASSEMBLY FIXTURE R/R RING ON NOZZLE | 1 | |
| RSE1220 REV C | ASSEMBLY FIXTURE RlR RING ON NOZZLE | 1 | |
| S-17-1 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 1, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-2 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 2, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-3 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 3, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-4 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 4, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-5 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 5, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-6 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 6, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-7 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 7, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-8 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 8, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S2100100101A | LED RING - PCBA ASSEMBLY | 1 | |
| S47058 | ASSEMBLY CENTERING TOOL | 1 | |
| S47059 | ASSEMBLY CENTERING TOOL | 1 | |
| SK VB1152 | NOSE GEAR DOWNSPRING DISASSEMBLY/REASSEMBLY TOOL | 1 | |
| SK238-42 | TOOL O-RING ASSEMBLY | 1 | |
| SK238-43 | TOOL, O-RING ASSEMBLY | 1 | |
| SK238-44 | TOOL, O-RING ASSEMBLY | 1 | |
| SK238-45 | TOOL, O-RING ASSEMBLY | 1 | |
| SK238-46 | TOOL, O-RING ASSEMBLY | 1 | |
| SK238-47 | TOOL, O-RING ASSEMBLY | 1 | |
| SP-0786 | PORT SEAL ASSEMBLY KIT, O-RING SP-0786 | 1 | |
| SPL-8592 | Ring Bracket Assembly | 1 | |
| ST2220-1-1MOD | POSITIONER AND RING ASSEMBLY | 1 | |
| ST8783-6 | STANDARD TOOL - ASSEMBLY, PROOF LOAD TEST EQUIPMENT, BACB10FB08GC BEARING INSTALLATION | 1 | |
| T-232794 | BEARING ASSEMBLY FIXTURE | 1 | |
| T-60328 | Installation Tool,Rotor-Bearing Holder Assembly | 1 | |
| T05005 | TOOL, MOORING LINE ASSEMBLY | 1 | |
| T060040 | ASSEMBLY TOOL - O-RING | 5 | |
| T101 | BEARING ASSEMBLY TOOL | 7 | |
| T101504 | PLATE ASSEMBLY, BEARING REMOVAL, ACCESSORY DRIVE | 1 | |
| T101519 | PLATE ASSEMBLY, ROTOR BRAKE BEARING | 1 | |
| T101530-5 | BEARING ROLL STAKE TOOL ASSEMBLY | 1 | |
| T101591 | BEARING REMOVAL PLATE ASSEMBLY | 1 | |
| T101592 | PLATE ASSEMBLY, QUILL BEARING REMOVAL | 1 | |
| T101655-101 | RING STAKE TOOL ASSEMBLY | 1 | |
| T102074 | PULLER ASSEMBLY, BEARING | 1 | |
| T102075 | MAST BEARING INSTALL & REMOVAL PLATE ASSEMBLY | 1 | |
| T103187-101 | BEARING PULLER ASSEMBLY | 1 | |
| T103188-101 | BEARING PULLER ASSEMBLY | 1 | |
| T103324-101 | DRIVER BEARING REMOVAL FREEWHEELING ASSEMBLY | 1 | |
| T103331-101 | DRIVER BEARING REMOVAL FREEWHEELING ASSEMBLY | 1 | |
| T103332-101 | SLEEVE, BEARING INSTALLATION FREEWHEELING ASSEMBLY | 1 | |
| T103333-101 | SLEEVE BEARING INSTALLATION FREEWHEELING ASSEMBLY | 1 | |
| T103347-101 | TOOL ASSEMBLY, PILOTS CYCLIC STICK CENTERING | 1 | |
| T115 | SPRING ASSEMBLY TOOL | 2 | |
| T2680002-17 | PULLER ASSEMBLY MLG SPRING | 1 | |
| T27289 | FIXTURE, HOLDING METERING VALVE ASSEMBLY PRESET | 1 | |
| T304376 | GUIDE TEFLON RING ASSEMBLY | 1 | |
| T46206 | SUPPORT (SUB PART OF F28015000 BEARING CUP ASSEMBLY/ DISASSEMBLY TOOL OF B787-9 MLG.) | 1 | |
| T5138-20 | CARRING CASE ASSEMBLY, | 2 | |
| T5138-60 | CARRING CASE ASSEMBLY, | 2 | |
| T5138-80 | CARRING CASE ASSEMBLY, | 2 | |
| T92404 | METERING PIN ASSEMBLY TOOL | 1 | |
| TAF00463 | BALL BEARING ASSEMBLY FIXTURE | 1 | |
| TAF00550 | BALL BEARING ASSEMBLY FIXTURE | 1 | |
| TB3030G001 | MEASURING ASSEMBLY | 1 | |
| TEK-5006/5007 ASY | Transducer Assembly and Manipulating Fixture set, w/ Plunger and Syringe | 1 | |
| TEK-5006/5007 SYRINGE | TEK-5006/5007 SYRINGE Assembly, w/ Leur Lock Fitting | 1 | |
| TEKIT-5006/5007 | Transducer Assembly & Manipulating Fixture Set, Includes all items per 767 PT4 57-50-05 PG9 FIG4, TEK-5006,TEK-5006-C1,TEK-5006-C2, TEK-5007, TEK-5007-C1, Manipulating Rod, Syringe, Cable, Couplant & 1450 Pelican Case *Does not include NDT694 & NDT695 | 1 | |
| TES-3775 | Fixture,Bearing Assembly | 1 | |
| TES-3775PM | FIXTURE,BEARING ASSEMBLY | 1 | |
| TO5005 | TOOL, MOORING LINE ASSEMBLY | 1 | |
| TSJ65B82591 | TEST FITTING ASSEMBLY - HYDRAULIC ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 2 | |
| U8770417 | SPRING HOUSING ASSEMBLY FOR S-MP-3(U8010011), S-MP-3L (U8770345), S-MP-4 (U8010015) AND S-MP-4L (U87 | 1 | |
| VDA1-19 | ASSEMBLY TOOL FOR SEALS AND O-RINGS | 1 | |
| VFT300A1T501 | TOOL FOR SPRING ASSEMBLY | 1 | |
| VM0-70 | ASSEMBLY RING | 1 | |
| WT-115197 | ASSEMBLY TOOL, O''''RING | 1 | |
| WT-68855 | ASSEMBLY TOOL, O'RING | 1 | |
| WT-TAY-INJECTIONS SET | SYRINGE ASSEMBLY | 1 | |
| Z1217-1 | WHEEL: TIRE & BEARING,ASSEMBLY, | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
