| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PWC70574 | RING ASSEMBLY, RING | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 109-0110-01-109E023A | TOOL ASSEMBLY, SWASHPLATE DUPLEX BEARING POSITIONING | 1 | |
| 109-3101-86-101 | TOOL ASSEMBLY, FLOATING RING CENTERING | 1 | |
| 10C1103G01 | Fixture,clamping-No 3 bearing assembly,inlet bearbox | 1 | |
| 114E5803-1 | PUSHER ASSEMBLY, BEARING AND SEAL | 1 | |
| 1525-502 | TOOL, ASSEMBLY, WORN WHEEL/BEARING | 1 | |
| 16A11738L1-1 | PULLER ASSEMBLY, BEARING - MOUNT, POWER DRIVE UNIT | 1 | |
| 1C9371G02 | Ring assembly,support-igv stator case | 1 | |
| 23054787 | Ring - Cryogenic,2nd & 3rd Stator Wheel Assembly, LP Turbine Rotor | 1 | |
| 269A9296 | Bar Assembly, 269A5050-11 Bearing Clip Removal | 1 | |
| 284045-1-1 | PULLER ASSEMBLY, BEARING AND BUSHING | 1 | |
| 294792-1 | ALIGLLINENT TOOL ASSEMBLY, BEARING HOUSING AND HOUSING AND | 1 | |
| 296977-1 | PILOT ASSEMBLY, SEAL AND BEARING, NUCLEUS | 1 | |
| 2MIT65B01503 | HEAD SPANNER WRENCH - ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
| 2MIT65B82591 | HEAD SPANNER WRENCH - ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 1 | |
| 2TSJ65B01503 | TEST FITTING ASSEMBLY - HYDRAULIC ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 2 | |
| 3545 | SPRING: FILTER ASSEMBLY, | 2 | |
| 3TSJ65B01503-1 | TEST FIXTURE - ACTUATOR ASSEMBLY, NOSE LANDING GEAR STEERING | 2 | |
| 403155-1 | LOCK ASSEMBLY, NOSE LANDING GEAR STRUT TO PREVENT MAX OLEO STRUT EXTENSION DURING JACKING | 1 | |
| 416231 | SAFT 416231 SYRINGE ASSEMBLY, 20 MM L | 1 | |
| 4772-0258-000 | RING ASSEMBLY, SCRAPER (WORKSHOP) | 6 | |
| 48238075 | SPRING ASSEMBLY, UPPER | 1 | |
| 450266266 | BEARING SUBASSEMBLY, MACHINED LOWER | 1 | |
| 4MIT65B01501 | DIE - BEARING STAKE, ROD END ASSEMBLY, 65B01521 AND 65B01537 | 1 | |
| 4MIT65B01503 | SOCKET - TORQUE WRENCH, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
| 6720 | RING: SNAP,ASSEMBLY, SR-125 | 2 | |
| 733063 | TOOL ASSEMBLY, DISASSEMBLY SPRINGS | 1 | |
| 5013266 | HOLDER SUBASSEMBLY,SPRING | 1 | |
| 7MIT65B01503 | TOOL INSTALLATION - CAP RING, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
| 833921-1 | PULLER, SUPPORT ASSEMBLY, BEARING | 1 | |
| 834772-2 | BEARING ASSEMBLY, REMOVAL | 1 | |
| 856A1211G01 | Fixture, Clamping - No. 3 Bearing Assembly, Inlet Gearbox (clamping fixture) | 9 | |
| 856A1602G01 | FIXTURE, CHILL - HPT ROTOR BLADE AFT BLADE RETAINER (CHILL FIXTURE) THE CHILL FIXTURE IS USED TO HOLD DRY ICE AGAINST THE AFT HPT ROTOR DISK BLADE RETAINER, DURING DISASSEMBLY, TO RELEASE THE INTERFERENCE FIT BETWEEN THE RETAINER AND THE HPT DISK | 6 | |
| 8574813 | Fixture – Assembly, Housing Bearing | 1 | |
| 8MIT65B01503 | TOOL, COMPRESSION - CAP RING, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
| 98A27504003000 | EXTRACTOR - BEARING ASSEMBLY, FLAP TRACK NO.2, FORWARD MOUNTING | 6 | |
| 98A27504004000 | EXTRACTOR - BEARING ASSEMBLY, FLAP TRACKS 3, 4 AND 5, FORWARD MOUNTING | 4 | |
| 98A27504005000 | EXTRACTOR - BEARING ASSEMBLY, FLAP NO.6, FORWARD MOUNTING | 6 | |
| AFNDT-3290AL | Custom ST Aerospace Engineering Multi-Hole Standard 2 Plate Assembly, Manufactured to the Customer Supplied Drawing Specifications . Material: 7075-T6 Aluminum. 6 Total Hole Sizes to be determined. Includes Test Report and Certificate of Conformance. | 1 | |
| AGE10378 | PULLER ASSEMBLY, BEARING | 2 | |
| AGE11017 | MEASURING TOOL ASSEMBLY, BACKLASH | 6 | |
| AGE11640 | PULLER ASSEMBLY, BEARING | 2 | |
| AGE14035 | ASSEMBLY, BEARING DRIVER | 2 | |
| AGE14898 | ASSEMBLY, BEARING PULLER | 1 | |
| AGE16152 | PRINTED WIRING ASSEMBLY, MEZZANINE-GCU | 1 | |
| AGE16568 | FIXTURE DISASSEMBLY, FEATHERING ASSEMBLY | 1 | |
| AT55769-102 | TOOL-ASSEMBLY,RETAINER RING | 1 | |
| BOF65B07950 | BORING FIXTURE - TRUNNION FITTING ASSEMBLY, NOSE LANDING GEAR | 1 | |
| C27086-1 | REMOVAL/INSTALLATION EQUIPMENT - SPRING, TAB MECHANISM ASSEMBLY, ELEVATOR CONTROL | 13 | |
| CF65B82106 | SPRING CHECKING FIXTURE - LOAD LIMITER ASSEMBLY, AILERON CONTROL | 1 | |
| F70150 | Puller assembly，control actuator bearing | 1 | |
| F70312-16 | ADAPTER - TORQUE WRENCH, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 4 | |
| G32019-1 | ROLLER SWAGING EQUIPMENT - OUTBOARD TRUNNION BEARING ASSEMBLY, MAIN LANDING GEAR | 1 | |
| GS15848-1 | HOLD THE PROPELLER DURING DISASSEMBLY, ASSEMBLY AND TEST | 8 | |
| K0654 | BEARING SUBASSEMBLY, MACHINED LOWER | 1 | |
| LTCT14684-01 | Pusher Assembly, No. 1 Bearing Retainer | 1 | |
| LTCT14759-01 | Tool Assembly, No. 1 Bearing and Housing, and No. 1 Seal Installation | 1 | |
| LTCT14763-01 | Puller Assembly, Mechanical, No. 1 Bearing and Housing | 1 | |
| LTCT25548-01 | Fairing Assembly, Referee Nozzle and Core Cowl | 1 | |
| LTCT25555-01 | Fitting Assembly, No. 4/5 Bearing Scavenge Temperature/Pressure | 1 | |
| LTCT4968-01 | Tool Assembly, No. 2 Bearing Package Installation | 2 | |
| LTCT5236-01 | Puller Assembly, Mechanical No. 1 Bearing Aft Inner Race | 1 | |
| LTCT5970-01 | Staking Tool Assembly, Ring Gear Lock Cup | 1 | |
| LTCT6056-01 | Puller Assembly, Mechanical, Bearing No. 1 | 1 | |
| LTCT7534-01 | Unlocking Tool Assembly, Ring Gear Lock Cup | 1 | |
| M0NT733063 | TOOL ASSEMBLY, DISASSEMBLY SPRINGS | 1 | |
| MIT65B01503 | ADAPTER - TORQUE WRENCH, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 1 | |
| MIT65B04252-1 | KEEPER - COMPRESSION SPRING ASSEMBLY, BULK CARGO DOOR LATCH | 1 | |
| MIT65B09877-1 | TOOL - SPRING CARTRIDGE ASSEMBLY, BULK CARGO | 2 | |
| OHME65B01519-1 | OVERHEAD EQUIPMENT SLING - ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
| PWA 105310 | CRADLE, HANDLING − ENGINE ASSEMBLY, FUEL PUMP AND FUEL METERING UNIT (REPLACES | 1 | |
| PWA102419 | DRIFT - DISASSEMBLY, GEARBOX, ROLLER BEARING INNER RACE, STARTER (FRONT) | 1 | |
| PWA105310 | CRADLE, HANDLING - ENGINE ASSEMBLY, FUEL PUMP AND FUEL METERING UNIT (REPLACES PWA 85989) | 1 | |
| PWA12126 | BASE - DISASSEMBLY, ACCESSORY DRIVE GEAR AND ROLLER BEARING | 2 | |
| PWA29647 | FIXTURE - SEAL ASSEMBLY, N1 & 2 BEARING_[PWA29647] | 2 | |
| PWA85267 | BASE - ASSEMBLY, GEARBOX; ROLLER BEARING INNER RACE; OIL AND SCAVENGE PUMP | 1 | |
| PWA85274 | PLATE - DISASSEMBLY, GEARBOX ROLLER BEARING INNER RACE, PMA | 1 | |
| PWA85279 | DRIFT - DISASSEMBLY, GEARBOX, ROLLER BEARING INNER RACE, DEOILER (FRONT) | 1 | |
| PWA86345 | PLATE - DISASSEMBLY, GEARBOX, ROLLER BEARING INNER RACE (VARIOUS) | 1 | |
| PWA88683 | BASE - ASSEMBLY, GEARBOX; ROLLER BEARING INNER RACE; OIL AND SCAVENGE PUMP | 1 | |
| PWC30766 | TOOL, ASSEMBLY, FUEL NOZZLE STRAINER RETAINING RING | 3 | |
| RB T101519 | PLATE ASSEMBLY, ROTOR BRAKE BEARING | 3 | |
| RB T103002 | Wrench Assembly, Input Bearing Nut | 1 | |
| RB T103177-101 | 3 Jaw Puller Assembly, Planetary Bearing | 1 | |
| RBT102074 | PULLER ASSEMBLY, BEARING | 2 | |
| RBW109-3101-86-101 | Tool Assembly, Floating Ring Centering | 2 | |
| RBW895-3101-25-101 | Tool Assembly, Bearing Staking | 1 | |
| RBW895-3101-26-101 | Tool Assembly, Bearing Installation | 1 | |
| RBW895-3101-27-101 | Tool Assembly, Bearing Test | 1 | |
| ST8783-6 | STANDARD TOOL - ASSEMBLY, PROOF LOAD TEST EQUIPMENT, BACB10FB08GC BEARING INSTALLATION | 1 | |
| T101504 | PLATE ASSEMBLY, BEARING REMOVAL, ACCESSORY DRIVE | 1 | |
| T101519 | PLATE ASSEMBLY, ROTOR BRAKE BEARING | 1 | |
| T101592 | PLATE ASSEMBLY, QUILL BEARING REMOVAL | 1 | |
| T102074 | PULLER ASSEMBLY, BEARING | 1 | |
| T103347-101 | TOOL ASSEMBLY, PILOTS CYCLIC STICK CENTERING | 1 | |
| T5138-20 | CARRING CASE ASSEMBLY, | 2 | |
| T5138-60 | CARRING CASE ASSEMBLY, | 2 | |
| T5138-80 | CARRING CASE ASSEMBLY, | 2 | |
| TEK-5006/5007 SYRINGE | TEK-5006/5007 SYRINGE Assembly, w/ Leur Lock Fitting | 1 | |
| TSJ65B82591 | TEST FITTING ASSEMBLY - HYDRAULIC ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 2 | |
| Z1217-1 | WHEEL: TIRE & BEARING,ASSEMBLY, | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
