| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| TMHCR15-21-08 | RING 2 | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 21931A1-801 | FX2 - BELLYFAIRING | 1 | |
| (CALIB) 97F57508704001 | RPRTOOL REPAIR-TOOL,FAIRING 2 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A10003900000 | MOORING FITTING FR 12 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A10003900001 | MOORING FITTING FR 12 RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203000048 | MOORING MOORING FITTING, FRAME 62 63 (L (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203000049 | MOORING MOORING FITTING, FRAME 62 63 (R (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203003042 | SHORING SHORING ASSY BETWEEN FR.24 AND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004053000 | AIRBUS RETRACT ACT. BORING A320 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203029000 | R/I ENGINE MOUNT BEARING A320 NEO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021066 | SHORING FITTING FR20 / 29 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S57003028102 | SWAGING/CUTTING TOOL BEARING NSA 8132-04 | 1 | |
| (CALIB) AJA55343103000 | SLING R/I VTP FAIRING/LE/PANELS / 20825MI3 | 1 | |
| (CALIB) MA25902A | PROFESSIONAL MEASURING INS; ALMEMO 2590-2A (CALIBRATION) | 1 | |
| (CALIB) MIT65B90361 | TOOL - ROLLER SWAGING, 60B00180-302 BEARING (CALIBRATION) | 1 | |
| 0-56LBS | SPRING BALANCE UP TO 25 KG | 1 | |
| 01-1001-10 | ANALYZER - DATABUS, ARINC 429 (SPECIFY 110V OR 220V WHEN ORDERING) | 1 | |
| 01-1001-12 | TESTER ARINC 429 (SPECIFY 110V220V WHEN ORDERING) | 5 | |
| 01472 | SEAL KIT FOR J-AXLE12HPA (CONTAINING: SPRING, VALVE AND BALL) | 1 | |
| 02-0544C0110 | TRONAIRÃÂî 02-0544C0110 TRIPOD HYDRAULIC JACK WITH SPRING LOADED CASTERS, 5 TON/4.5 METRIC TON | 4 | |
| 02-125 | BURRAWAY DEBURRING TOOLS FRACTIONAL SIZES ( DESCRIPTION: COMPLETE TOOL )( HOLE SIZE: 1/8" )( DECIMAL EQUIVALENT: .1250" ) | 1 | |
| 02-125-1 | BURRAWAY DEBURRING TOOLS FRACTIONAL SIZES ( DESCRIPTION: EXTRA BLADE )( HOLE SIZE: 1/8" )( DECIMAL EQUIVALENT: .1250" ) | 1 | |
| 02-156 | BURRAWAY DEBURRING TOOLS FRACTIONAL SIZES ( DESCRIPTION: COMPLETE TOOL )( HOLE SIZE: 5/32" )( DECIMAL EQUIVALENT: .1562" ) | 1 | |
| 02-156-1 | BURRAWAY DEBURRING TOOLS FRACTIONAL SIZES ( DESCRIPTION: EXTRA BLADE )( HOLE SIZE: 5/32" )( DECIMAL EQUIVALENT: .1562" ) | 1 | |
| 02-218 | BURRAWAY DEBURRING TOOLS FRACTIONAL SIZES ( DESCRIPTION: COMPLETE TOOL )( HOLE SIZE: 7/32" )( DECIMAL EQUIVALENT: .2188" ) | 1 | |
| 02-218-1 | BURRAWAY DEBURRING TOOLS FRACTIONAL SIZES ( DESCRIPTION: EXTRA BLADE )( HOLE SIZE: 7/32" )( DECIMAL EQUIVALENT: .2188" ) | 1 | |
| 02-250 | DEBURRING TOOL BURRAWAY 1/4 D .250 | 1 | |
| 02-MA-2.0 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) | 1 | |
| 02-MA-2.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) | 1 | |
| 02-MA-2.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-2.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-3.0 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-3.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-3.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-3.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-4.0 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-4.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-4.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-4.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-5.0 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-5.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-5.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-5.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-6.0 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-6.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-6.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-6.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-7.0 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-7.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-7.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-7.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02020N7 | OÕRing BUNA NITRYL 020 | 1 | |
| 02024N7 | OÕRING BUNA NITRYL 024 | 1 | |
| 02026N7 | OÕRing BUNA NITRYL 026 | 1 | |
| 020915-004 | PLASTIC SYRINGE WITH 20MM NOZZLE | 3 | |
| 020916-001 | SYRINGE ASSEMBLY (EITH OZZLE 20MM (0.79IN/) | 1 | |
| 0210141F | WASHER SPRING 1/2 ZINC CLEAR 8SSP/M2 | 1 | |
| 02128N7 | OÕRing BUNA NITRYL 128 | 1 | |
| 02132N7 | OÕRing BUNA NITRYL 132 | 1 | |
| 02142N7 | OÕRing BNA NITRYL 142 | 1 | |
| 025860-000 | SYRINGE WITH M8 NOZZLE 20 MM ASSEMBLY (SPECIALIZED FOR CVH170KA CELLS ) | 1 | |
| 026T005 | AS5282 TEST RING | 1 | |
| 02ACA571 | Mitutoyo 02ACA571 Auxiliary Spindle Spring (25.4mm/1") | 1 | |
| 02ACA773 | Mitutoyo 02ACA773 Auxiliary Spindle Spring (50.8mm/2") | 1 | |
| 035A-39302 | BEARING /USED ON 10 A-39117-21,-22 | 1 | |
| 04-22060 | DOUBLE EDGE DEBURRING TOOL MADE OF M-F2 STEEL | 1 | |
| 04-22181 | UNIVERSAL DEBURRING 21 PCS KIT | 1 | |
| 04-3090-0 | Spring Tension Clamps (Throat depth: 2") (Jaw capacity: 0" to 7/16") (Add to cart: Add To Cart) | 1 | |
| 04-3090-1/2 | Spring Tension Clamps (Throat depth: 2") (Jaw capacity: 0" to 7/16") (Add to cart: Add To Cart) (Throat depth: 3-1/2") (Jaw capacity: 9/16" to 1") (Add to cart: Add To Cart) | 1 | |
| 04-3090-1/4 | Spring Tension Clamps (Throat depth: 2") (Jaw capacity: 0" to 7/16") (Add to cart: Add To Cart) (Throat depth: 3-1/2") (Jaw capacity: 9/16" to 1") (Add to cart: Add To Cart) (Throat depth: 3") (Jaw capacity: 1/4" to 15/32") (Add to cart: Add To Cart) | 1 | |
| 04-507-FB | Rol-Air 37° Flaring Tool (Motor: Soft Copper, Aluminum & Brass) (Materials: 3/16", 1/4", 5/16", 3/8", 1/2") (Sizes: 2.5 lbs (1.1 kgs)) (Add to cart: Add To Cart) | 1 | |
| 04-58100 | IRWIN® Spring Clamps (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-58200 | IRWIN® Spring Clamps (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Jaw capacity: 2" (51 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-58300 | IRWIN® Spring Clamps (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Jaw capacity: 2" (51 mm)) (Add to cart: Add To Cart) (Jaw capacity: 3" (76 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-634 | Nickel Plated Spring Clamps (Jaw opening: 1" (25 mm)) (Overall length: 4" (102 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-636 | Nickel Plated Spring Clamps (Jaw opening: 1" (25 mm)) (Overall length: 4" (102 mm)) (Add to cart: Add To Cart) (Jaw opening: 2" (51 mm)) (Overall length: 6" (152 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-639 | Nickel Plated Spring Clamps (Jaw opening: 1" (25 mm)) (Overall length: 4" (102 mm)) (Add to cart: Add To Cart) (Jaw opening: 2" (51 mm)) (Overall length: 6" (152 mm)) (Add to cart: Add To Cart) (Jaw opening: 3" (76 mm)) (Overall length: 9" (229 mm)) (Add | 1 | |
| 04-640 | Nickel Plated Spring Clamps (Jaw opening: 1" (25 mm)) (Overall length: 4" (102 mm)) (Add to cart: Add To Cart) (Jaw opening: 2" (51 mm)) (Overall length: 6" (152 mm)) (Add to cart: Add To Cart) (Jaw opening: 3" (76 mm)) (Overall length: 9" (229 mm)) (Add | 1 | |
| 04-CSX-1/4 | CSX SPRING LOAD TEMP. FASTENER DIA.=1/4" GRIP=0-1/2" | 1 | |
| 04-CSX-1/8 | CSX SPRING LOAD TEMP. FASTENER DIA.=1/8" GRIP=0-1/2" | 1 | |
| 04-CSX-5/32 | CSX SPRING LOAD TEMP. FASTENER 5/32" D 0-1/2" GRIP | 1 | |
| 04-CSXK-1/4 | CSX SPRING LOAD TEMP. FASTENER DIA.=7/32" GRIP=1.5-2.5" | 1 | |
| 04-CSXK-3/16 | CSX SPRING LOAD TEMP. FASTENER DIA.=3/16" GRIP=2-2.5" | 1 | |
| 04-CSXL-1/4 | CSX SPRING LOAD TEMP. FASTENER DIA.=1/4" GRIP=1/2-1" | 1 | |
| 04-CSXL-3/16 | CSX SPRING LOAD TEMP. FASTENER DIA.=3/16" GRIP=1/2-1" | 1 | |
| 04-E-111P | SHAVIV® AEROBURR DEBURRING SETS ( DESCRIPTION: REPLACEMENT BLADES-THIN POINTED, HEAVY-DUTY 3.2 MM ) | 1 | |
| 04-M-7/32 | CLECO FASTENER (SPRING PLUG) 7/32 | 1 | |
| 04AZB139 | MEASURING HEAD HOLTEST/BOREMATIC 0.275-0.35" | 1 | |
| 04AZB140 | MEASURING HEAD HOLTEST/BOREMATIC 0.35-0.425" | 1 | |
| 04AZB141 | MEASURING HEAD HOLTEST/BOREMATIC 0.425-0.5" | 1 | |
| 07047-10 | VACUUM PUMP, CAPABLE OF 62-65 MB SUCTION, TO PULL SUCTION ON INFLATABLE DURING FOLDING | 1 | |
| 07100 | BEARING: CONE,ROLLER,TAPERED, MADE TO CLASS 2 W/CODE 629 | 6 | |
| 08-13774 | TCM 6 CYLINDER 470 / 520 / 550 SPRING COMPRESSOR TOOL | 1 | |
| 086-034 | SPRING STEEL ROD CLIP FOR SHAFT 1.062-1.312 DIA | 1 | |
| 09-896 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) | 1 | |
| 09-896-1 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) | 1 | |
| 09-897 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 09-RB-1 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 09-RB-2 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 09-RB-3 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 09-RB-4 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 09-RB-5 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 09-RH-2 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 2 | |
| 09-RH-3 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 09-RH-4 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 0EX48B | SPANNER OPEN END/RING - 1-1/2" | 3 | |
| 0R01 | Ionic Systems O Ring 103.2 mm x 5 mm, Black Nitrile 70 Shore | 2 | |
| 0U141257 | CONE-O-RING,THREADED SLEEVE,MICROSWITCH 2 | 1 | |
| 0U145506 | MULTIMETER - DIGITAL/ANALOG (OR EQUIVALENT METER MEETS TASK REQUIREMENTS) 1 1863 MEGOHMMETER 1 14053 WIRE RETRIEVER 1 36122 ADAPTOR-CHARGING,PITOT PROBE 1 173784 ADAPTER OXYGENT SEVICING 2 897000 WING JACK 1 2231058 RING GAUGE 1 2239106 LOADCHECKING | 24 | |
| 1-473-10-2-2 | ERGO™ ENGINEERING FILE SET SECOND CUT 250 MM - 3 PCS | 1 | |
| 1.325.010 | UAS - WHEEL ADAPTER RING FOR A320 NLG | 1 | |
| 1.325.053 | UAS - WHEEL ADAPTER RING FOR A320 MLG | 1 | |
| 1.325.117 | UAS - WHEEL ADAPTER RING FOR A320 NLG EX-VIVA | 1 | |
| 10023B | BEARING NEEDLE 1/2 X 11/16X5/8 | 1 | |
| 1026 | DELTA RING #1026 | 1 | |
| 10059 | BEARING NEEDLE THRUST .752X1.2 | 1 | |
| 101-00304 | Fuel Quantity Adapter Module for Swearingen SA 226 | 1 | |
| 101-00877 | Fuel Quantity Adapter Module for Swearingen SJ30Â2 | 1 | |
| 1027 | 2Ó D-RING | 1 | |
| 10044 | BEARING NEEDLE 3/16 X11/32X3/8 | 1 | |
| 101-00900 | O-RING/ MS28775-111 | 2 | |
| 101-01200 | O-RING/ MS28775-114 | 13 | |
| 1040 | O-RING 14x1,78 20B7 | 8 | |
| 105-31702W-KIT | BK117/EC145/UH-72 TAIL ROTOR CENTERING TOOL AND BEARING / BUSHING TOOLS | 1 | |
| 109-3130-85-101 | TOOL KIT,T/R PITCH CHANGE SHAFT DOUBLE BEARING REMOVAL/INSTL (NSCM A0126) | 1 | |
| 10931 | BEARING BALL 8 X 22 X 7 | 2 | |
| 10C1120G01 | FIXTURE, INSTALL/REMOVE - NO. 5 BEARING RETAINING NUT (INSTALL/REMOVE FIXTURE) (SUPERSEDED BY 10C1120G02) | 1 | |
| 10C1120G02 | FIXTURE, INSTALL/REMOVE - NO. 5 BEARING RETAINING NUT (INSTALL/REMOVE FIXTURE) (SUPERSEDES 10C1120G01) | 1 | |
| 11011 | K-SERIES SPRING CLECOS 3/32" | 2 | |
| 11018 | KK-SERIES SHORT BODY SPRING CLECOS 3/32" | 1 | |
| 11020 | KK-SERIES SHORT BODY SPRING CLECOS 5/32" | 1 | |
| 110701-1 | BEARING NHA:1169002 16112 | 4 | |
| 11075 | SPRING CLECO #27 | 3 | |
| 1116-4000-21 | ANALYZER - DATA BUS, ARING 429 | 1 | |
| 1116-400021 | ANALYZER DATA BUS ARING 429 | 1 | |
| 1121-0628-P5 | PACE ENDURA THERMO-DRIVE DESOLDERING TIP (1121-0628-P5:GMFDM) | 1 | |
| 11297-1 | POSITIONER, SPRING LOADED (ST2220-1-4 | 1 | |
| 11297-17 | POSITIONER, SPRING LOADED(ST2220-1-52 | 1 | |
| 11297-18 | POSITIONER, SPRING LOADED(ST2220-1-53 | 1 | |
| 11297-19 | POSITIONER, SPRING LOADED(ST2220-1-54 | 1 | |
| 11297-2 | POSITIONER, SPRING LOADED (ST2220-1-5 | 1 | |
| 11297-20 | POSITIONER, SPRING LOADED(ST2220-1-55 | 1 | |
| 11297-23 | POSITIONER, SPRING LOADED(ST2220-1-60) | 1 | |
| 11297-24 | POSITIONER, SPRING LOADED(ST2220-1-65 | 1 | |
| 11297-3 | POSITIONER, SPRING LOADED (ST2220-1-6 | 1 | |
| 11297-4 | POSITIONER,SPRING LOADED(ST2220-1-14A | 1 | |
| 11297-5 | POSITIONER, SPRING LOADED(ST2220-1-21 | 1 | |
| 11297-6 | POSITIONER, SPRING LOADED(ST2220-1-30) | 1 | |
| 11298-1 | POSITIONER, SPRING LOADED(ST2220-1-8 | 1 | |
| 11298-10 | POSITIONER, SPRING LOADED (ST2220-1-25 | 1 | |
| 11298-13 | POSITIONER,SPRING LOADED(ST2220-1-28A | 1 | |
| 11298-15 | POSITIONER, SPRING LOADED (ST2220-1-31 | 1 | |
| 11298-18 | POSITIONER,SPRING LOADED(ST2220-1-40) | 1 | |
| 11298-19 | POSITIONER, SPRING LOADED(ST2220-1-41 | 1 | |
| 11298-2 | POSITIONER,SPRING LOADED(ST2220-1-9A | 1 | |
| 11298-4 | POSITIONER,SPRING LOAD(ST2220-1-11A | 1 | |
| 11298-5 | POSITIONER, SPRING LOADED(ST2220-1-16) | 1 | |
| 11298-7 | POSITIONER, SPRING LOAD(ST2220-1-22 | 1 | |
| 11298-9 | POSITIONER, SPRING LOADED (ST2220-1-24) | 1 | |
| 113-302 | NLG LAGO 052 053 WHEEL FAIRING COLYAER KIT | 1 | |
| 114-1321 | ASSEMBLY TOOL, O-RING & BACKUP RING (2-1599) | 1 | |
| 114-323 | PISTON SLEEVE TOOL RINGS (2 IT) | 1 | |
| 116-10002 | 10 V, 32 CHANNEL VOLTAGE IP MODULE, SPRING TERMINAL | 1 | |
| 1177-512 | 1177-512 SIZING RING | 1 | |
| 11C3094 | FIXTURE - SEATING - CHECK-NO 2 BEARING | 1 | |
| 11C3094G02 | FIXTURE, SEATING, CHECK - NO. 2 BEARING | 1 | |
| 11C3118 | FIXTURE - LIFT & TURN NO. 2 BEARING HOUSING | 1 | |
| 11C3128 | PULLER - NO 2 BEARING & HSG - FAN SHAFT EXT | 1 | |
| 11C3128G01 | PULLER - NO. 2 BEARING AND HOUSING, FAN SHAFT EXTENSION | 1 | |
| 11C3220 | TOOL - INSTALLATION-RETAINING RING - HPT STG 2 NOZZLE AIR TUBE | 1 | |
| 11C3990G01 | SPL-12371 - DRIVE PAD CARBON SEAL & MATING RING KIT | 1 | |
| 11C3990G02 | SPL-12371 - DRIVE PAD CARBON SEAL & MATING RING KIT | 1 | |
| 11C3991G01 | SPL-12372 - EDP & FUEL PUMP CARBON SEAL & MATING RING KIT | 1 | |
| 11C3991G02 | SPL-12372 - EDP & FUEL PUMP CARBON SEAL & MATING RING KIT | 1 | |
| 11C3992G01 | SPL-12373 - IDG CARBON SEAL & MATING RING KIT | 1 | |
| 11C3992G02 | SPL-12373 - IDG CARBON SEAL & MATING RING KIT | 1 | |
| 11C3994G01 | IDG MATING RING KIT (SPL-12374) | 1 | |
| 11C3994G02 | SPL-12374 - IDG MATING RING KIT | 1 | |
| 11C4254G01 | FIXTURE, CAL-ROD HEATER - NO. 1 BEARING HOUSING (208-240 VAC, 50-60 HZ) | 1 | |
| 11C4257 | FIXTURE - SEATING-NO 2 BEARING INNER RACE | 1 | |
| 11C4257G01 | FIXTURE, SEATING - NO. 2 BEARING INNER RACE | 1 | |
| 11C4260 | FIXTURE - LIFT & TURN-FWD FAN SHAFT & NO 2 BEARING | 1 | |
| 11C4260G02 | FIXTURE, LIFT/TURN - FORWARD FAN SHAFT AND NO. 2 BEARING | 1 | |
| 11C4262 | FIXTURE, LIFT & TURN FWD FAN SHAFT & NO 2 BEARING | 1 | |
| 11C4533G01 | SUPPORT RING, HEATER - NO. 2 BEARING | 1 | |
| 11C4583 | ADAPTER WRENCH NO 2 BEARING MID NUT | 1 | |
| 11C4583G04 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | 1 | |
| 11C4598 | STAND-ASSEMBLY/DISASSEMBLE NO. 2 BEARING (WITH HYD PUMP) | 1 | |
| 11C4598G02 | STAND, ASSEMBLY/DISASSEMBLY NO. 2 BEARING HOUSING | 1 | |
| 11C4599G01 | FIXTURE, HEAT GUN - NO. 2 BEARING HOUSING | 1 | |
| 11C4669 | CONTAINER - NO. 2 BEARING HOUSING | 1 | |
| 11C4847G01 | FIXTURE, LIFT AND TURN NO. 2 BEARING HOUSING | 1 | |
| 121-038 | KEY RING ¯1/2 | 1 | |
| 1230B.25 | ELECTRONIC SOLDERING IRON + STAND RANGE FROM 25W-40W | 1 | |
| 13-03304 | Bowers 13-03304 Comparator Stand Plain Column Height 284mm Measuring Table Area 98 x 115mm | 1 | |
| 13-03305 | Bowers 13-03305 Comparator Stand Plain Column Height 320mm Measuring Table Area 98 x 180mm | 1 | |
| 13-03306 | Bowers 13-03306 Comparator Stand Thread Column Height 320mm Measuring Table Area 98 x 180mm | 1 | |
| 13-03308 | Bowers 13-03308 Comparator Stand Handwheel Column Height 320mm Measuring Table Area 98 x 180mm | 1 | |
| 13-03309 | Bowers 13-03309 Comparator Stand Handwheel Column Height 320mm Measuring Table Area 150 x 200mm | 1 | |
| 13-1423102 | Bowers 13-1423102 Comparator Stand Granite Grade 00 Height 250mm Measuring Table Area 230 x 200 x 50mm | 1 | |
| 13-3022 | Bowers 13-3022 Standard Tracer SH Smallest Bore Dia 8mm Max. Measuring Depth 27mm Included in the Delivery | 1 | |
| 13-3056 | Bowers 13-3056 Bore tracer BH Smallest bore Dia 2.5mm Max. Measuring Depth 20mm | 1 | |
| 130-5569 | KUNZ GUIDE BEARING 23X110 MM | 1 | |
| 130.5571 | KUNZ GUIDE BEARING 28X110 MM | 1 | |
| 132.5010 | WHEEL ADAPTER RING FOR A320 NLG | 1 | |
| 132.5053 | WHEEL ADAPTER RING FOR A320 MLG | 1 | |
| 132.5066 | UAS - WHEEL ADAPTER RING FOR P/N 2606735-1/-2 | 1 | |
| 132.5079 | KUNZ ADAPTER RINGS FOR A320 | 1 | |
| 132.5084 | KUNZ ADAPTER RINGS FOR A321 | 1 | |
| 132.5112 | UAS - WHEEL ADAPTER RING FOR P/N C20509000 | 1 | |
| 132.5117 | WHEEL ADAPTER RING FOR A320 NLG EX-VIVA | 1 | |
| 132.5312 | WHEEL ADAPTER RING FOR 3-1720 | 1 | |
| 1230.4 | ELECTRONIC SOLDERING IRON + STAND RANGE FROM 25W-40W | 1 | |
| 1320RZ-1/2-9/16 | RATCHET RING WRENCH 1/2-9/16 | 2 | |
| 1652 | JET BRAND FOOT SHEARS 16 GAUGE 52 SHEARING CAPAC | 4 | |
| 1691 | BETA 016910210 1691BM/10-MEASURING TAPES BM 10M | 1 | |
| 1692 | BETA 016920053 1692 /3-MEASURING TAPES 3MT 1692 /3 | 1 | |
| 1700 | BEARING 16112 | 6 | |
| 1704 | BEARING 16112 | 7 | |
| 13287 | CUP BEARING # 13287 | 1 | |
| 13SF22 | SPHERICAL BEARING GEZ34ES2RS (2699K15) | 1 | |
| 14-6801-0120 | TIRE BEAD BRAKER MODEL 14-6801-0120 (TRONAIR) MUST INCLUDE MLW ADAPTER RING Z-1063-17 AND NLW ADAPTER RING Z-1064-10 | 12 | |
| 140-600 | TIRE COVERS (no wheelpant faring) (set of 2) | 1 | |
| 1401-220 | TACAN BEARING AND SIMULATION 220V | 1 | |
| 14291 | O-RING .250X.063IN | 1 | |
| 14ME65B00161 | GUIDE - ALIGNMENT, WING LANDING GEAR TRUNNION BEARING SPL-5129 | 3 | |
| 15-0066 | Ring Terminal Grip for MPT-250B & PT-150HA | 2 | |
| 15-0066C | Ring Terminal Grip for MPT-250C | 2 | |
| 15-2026 | Spring, Rack & Pinion for MPT-250B | 2 | |
| 160200-9Z000 | RH SEATPAN SPRING INSTALL TOOL (RECARO V02953) | 12 | |
| 170-600 | TIRE COVERS (no wheelpant faring) (set of 2) | 1 | |
| 177-125 | Mitutoyo 177-125 Setting Ring 8.0mm | 1 | |
| 177-126 | Mitutoyo 177-126 Setting Ring 10mm | 1 | |
| 177-132 | Mitutoyo 177-132 Setting Ring 14.0mm | 1 | |
| 177-139 | Mitutoyo 177-139 Setting Ring 25mm | 1 | |
| 177-182 | Mitutoyo 177-182 Setting Ring .65" | 2 | |
| 177-187 | Mitutoyo 177-187 Setting Ring 2.0" | 1 | |
| 177-188 | Mitutoyo 177-188 Setting Ring 2.8" | 1 | |
| 177-204 | Mitutoyo 177-204 Setting Ring 4mm | 1 | |
| 177-205 | Mitutoyo 177-205 Setting Ring 5mm | 1 | |
| 177-206 | Mitutoyo 177-206 Setting Ring .16" | 1 | |
| 177-207 | Mitutoyo 177-207 Setting Ring .24" | 2 | |
| 177-208 | Mitutoyo 177-208 Setting Ring 2.5mm | 1 | |
| 177-209 | Mitutoyo 177-209 Setting Ring .1" | 1 | |
| 177-220 | Mitutoyo 177-220 Setting Ring 1mm | 1 | |
| 177-222 | Mitutoyo 177-222 Setting Ring 1.1mm | 1 | |
| 177-225 | Mitutoyo 177-225 Setting Ring 1.2mm | 1 | |
| 177-227 | Mitutoyo 177-227 Setting Ring 1.3mm | 1 | |
| 177-230 | Mitutoyo 177-230 Setting Ring 1.4mm | 1 | |
| 177-236 | Mitutoyo 177-236 Setting Ring 1.75mm | 1 | |
| 177-239 | Mitutoyo 177-239 Setting Ring 2mm | 1 | |
| 177-242 | Mitutoyo 177-242 Setting Ring 2.25mm | 1 | |
| 177-248 | Mitutoyo 177-248 Setting Ring 3mm | 1 | |
| 177-250 | Mitutoyo 177-250 Setting Ring 3.25mm | 1 | |
| 177-252 | Mitutoyo 177-252 Setting Ring 3.5mm | 1 | |
| 177-255 | Mitutoyo 177-255 Setting Ring 3.75mm | 1 | |
| 177-257 | Mitutoyo 177-257 Setting Ring 4.5mm | 1 | |
| 177-263 | Mitutoyo 177-263 Setting Ring 5.5mm | 1 | |
| 177-267 | Mitutoyo 177-267 Setting Ring 6mm | 1 | |
| 177-271 | Mitutoyo 177-271 Setting Ring 6.5mm | 1 | |
| 177-275 | Mitutoyo 177-275 Setting Ring 7.0mm | 1 | |
| 177-279 | Mitutoyo 177-279 Setting Ring 9.0mm | 1 | |
| 177-281 | Mitutoyo 177-281 Setting Ring .275" | 1 | |
| 177-283 | Mitutoyo 177-283 Setting Ring .425" | 1 | |
| 177-284 | Mitutoyo 177-284 Setting Ring 12mm | 1 | |
| 177-285 | Mitutoyo 177-285 Setting Ring 18.0mm | 1 | |
| 177-286 | Mitutoyo 177-286 Setting Ring 20mm | 1 | |
| 177-287 | Mitutoyo 177-287 Setting Ring .8" | 1 | |
| 177-288 | Mitutoyo 177-288 Setting Ring 30mm | 1 | |
| 177-289 | Mitutoyo 177-289 Setting Ring 1.2" | 1 | |
| 177-290 | Mitutoyo 177-290 Setting Ring 40mm | 1 | |
| 177-291 | Mitutoyo 177-291 Setting Ring 1.6" | 1 | |
| 177-292 | Mitutoyo 177-292 Setting Ring 60mm | 1 | |
| 177-293 | Mitutoyo 177-293 Setting Ring 2.4" | 1 | |
| 177-294 | Mitutoyo 177-294 Setting Ring 80mm | 1 | |
| 177-295 | Mitutoyo 177-295 Setting Ring 3.2" | 1 | |
| 177-296 | Mitutoyo 177-296 Setting Ring 100mm | 1 | |
| 177-297 | Mitutoyo 177-297 Setting Ring 4.0" | 1 | |
| 177-298 | Mitutoyo 177-298 Setting Ring 125mm | 1 | |
| 177-299 | Mitutoyo 177-299 Setting Ring 5.0" | 2 | |
| 177-302 | Mitutoyo 177-302 Setting Ring 175mm | 1 | |
| 177-304 | Mitutoyo 177-304 Setting Ring 200.0mm | 1 | |
| 177-306 | Mitutoyo 177-306 Setting Ring 225mm | 1 | |
| 177-308 | Mitutoyo 177-308 Setting Ring 250mm | 1 | |
| 177-310 | Mitutoyo 177-310 Setting Ring 275mm | 1 | |
| 177-312 | Mitutoyo 177-312 Setting Ring 300.0mm | 1 | |
| 177-313 | Mitutoyo 177-313 Setting Ring 12.0" | 1 | |
| 177-314 | Mitutoyo 177-314 Setting Ring 62.0mm | 1 | |
| 177-315 | Mitutoyo 177-315 Setting Ring 2.5" | 1 | |
| 177-366 | Mitutoyo 177-366 Setting Ring .2" | 1 | |
| 17P9M2007 | Douglas Reference Standard Assembly For the Ultrasonic Calibration of Upper Wing Skin to common Stringer, Figure24-4 sheets 253. Material: 7075 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 17TES0900 | FUSELAGE FAIRING SET, RECORDER DATA INTERFACE - SRVIVR25 | 1 | |
| 180-600 | TIRE COVERS (no wheelpant faring) (set of 2) | 1 | |
| 185742-1T | BALL BEARING ASSEMBLY TOOL (2 IT) | 1 | |
| 18C1505 | STAND, ASSY - NO. 1 & 2 BEARING MODULE | 1 | |
| 18C1506 | PUSHER - NO. 1 & 2 BEARINGS & NO. 1 ROTATING SEAL | 1 | |
| 18C1513 | PULLER-NO 2 BEARING INNER | 1 | |
| 18D11995-1 | TOOL SET, V-22 FLEX RING WING TOWER BRNG | 1 | |
| 191-C2030 | Mitutoyo 191-C2030 - Crysta-Apex C Coordinate Measuring Machine | 1 | |
| 195-007 | CANOPY COVER, Wrap-Around, 24" fwd extension to cover cowl ring gap | 1 | |
| 195-009 | CANOPY COVER, over-top, 24" fwd ext to cover cowl ring gap, gas cap ext. | 1 | |
| 195-010 | CANOPY COVER, over-top, 24" fwd ext to cover cowl ring gap, gas cap ext. & under belly cowl ring gap mesh covering | 1 | |
| 195-830 | TRAVEL COVER, Light Weight Canopy Cover, Wrap-Around, 24" fwd extension to cover cowl ring gap | 1 | |
| 195-840 | TRAVEL COVER, Light Weight Canopy Cover, over-top, 24" fwd ext to cover cowl ring gap, gas cap ext. | 1 | |
| 195-850 | TRAVEL COVER, Light Weight Canopy Cover, over-top, 24" fwd ext to cover cowl ring gap, gas cap ext. & under belly cowl ring gap mesh covering | 1 | |
| 1986K16 | COMPRESION SPRING 1/2ÕÕ OD X .047 WIRE SST | 1 | |
| 19BY32 | BRISKHEAT® MINI COMPOSITE CURING HOT BONDER KIT W/COMPOSITE CURING HEATING BLANKETS, SINGLE ZONE, 240V, 19BZ32 – MODEL ACR-MINI-240KIT | 1 | |
| 19BY47 | BRISKHEAT® 6" X 12" SILICONE RUBBER COMPOSITE CURING HEATING BLANKET, 240V, 360W - 19BY47 | 1 | |
| 19BY49 | BRISKHEAT® 8" X 8" SILICONE RUBBER COMPOSITE CURING HEATING BLANKET, 240V, 320W - 19BY49 | 1 | |
| 19BY52 | BRISKHEAT® 12" X 24" SILICONE RUBBER COMPOSITE CURING HEATING BLANKET, 240V, 1440W - 19BY52 | 1 | |
| 1C6272 | RING SET, HEAT-TREAT - PTS SEAL, STAGES 2-6 | 1 | |
| 1C8312 | TOOL SET, REMOVE-RETAINING RING, STG 1 & STG 2 HP | 1 | |
| 1C8312G01 | TOOL SET, REMOVE HIGH PRESSURE COMPRESSOR ROTOR STAGE 1 AND 2 RETAINING RING | 1 | |
| 1R18885 | containment ring, wax, case assy stage 7-12 | 1 | |
| 1R18886 | containment ring, wax, case assy stage 7-12 | 1 | |
| 1R18887 | containment ring, wax, case assy stage 7-12 | 1 | |
| 1R18888 | containment ring, wax, case assy stage 7-12 | 1 | |
| 2-435N70 | O RING TORE 6.99MM ID145.42MM | 1 | |
| 2-8080-31 | OUTBOARD BEARING CUP ( 2IT) | 3 | |
| 2-8080-6 | INBOARD BEARING CUP (2 IT) | 2 | |
| 2-832-01-3220 | RING PROBE, INSIDE DIA 12.5 MM | 1 | |
| 2-832-01-3240 | PROBE-RING INSIDE DIA.20MM | 1 | |
| 2.009 | O'RING 5.28mm1D X 1.78mmTORE en EPDM | 1 | |
| 2.012 | O'RING 9.24mmID X 1.78mmTORE en EPDM | 1 | |
| 2.832.01-3220 | Ring probe DA=12.5 DB=30 | 1 | |
| 2.832.01-3235 | Ring probe DA=18 DB=29 | 1 | |
| 20-041 | SPRING PIN 3/32x3/4 ST. ST | 1 | |
| 20-14700 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) | 1 | |
| 20-6138 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 20-6200 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 20-6208 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 20-6255 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 20-6283 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 20-K0 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 20-K1 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 2 | |
| 20-K30 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 20-K32 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 20-K7 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 2000-6 - DREMEL | GAS SOLDERING IRON VERSATIP 2000-6 - DREMEL | 1 | |
| 2000A1751K01 | RUBBER RING ( PN DESATIVADO PELA B-TEC 32-02/12) | 2 | |
| 2024272-1 | BEARING REMOVAL FIXTURE (PN 2024272-1) | 1 | |
| 2025261-1 | BEARING REMOVAL FIXTURE (REMOVES 3617585-001 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND 3822055-1 COUPLING SHAFT) | 1 | |
| 23 | Tesa 00530421 TWIN-CAL IP67 – Models with rounded measuring faces for internal dimensions Digital Calipers 0-200mm / 0-8" | 1 | |
| 200 | SPRING 16112 | 4 | |
| 203 | Reducer PN#ASD1203 for TB3/TB125. Includes balllock pin for securing red | 7 | |
| 204 | Moore & Wright Radius Gauge Ring 16 piece 1/32"-17/64" | 2 | |
| 20400TAAI1993000-05 | SPRING PLIERS P/N:20400TAAI1993000-05 | 1 | |
| 204A | Moore & Wright Radius Gauge Ring 16 piece 9/32"-33/64" | 1 | |
| 204R | Moore & Wright Retail Pk Radius Gauge Ring, 1/32-17/64" | 1 | |
| 206R2200-10 | 206TR BEARING REMOVAL TOOL KIT | 1 | |
| 209-572 | DIGITAL MEASURING GAUGE, CGDO 20MM/.78" | 1 | |
| 20DAN | SPRING BALANCE 20DAN (48LBF) TOOL | 1 | |
| 20X3 | O'RING EPDM 20X3 | 1 | |
| 2118.84 | KELVIN PROBES PISTOL GRIP 10 FT (25 A, SPRING LOADED) | 1 | |
| 21406 | SPRING .042IN | 2 | |
| 21C1362G002 | #2 BEARING LOCKNUT SPANNER | 1 | |
| 21C8117G02 | PULLER NO 2 BEARING | 1 | |
| 21C8136G01 | PUSHER NO 2 BEARING INNER RING | 1 | |
| 23-JAN | NEEDLE BEARING INSTALLERS .562 PILOT | 1 | |
| 2309-T002-001 | MOORING FITTING - REMOVABLE P/N 2309-T002-001 | 2 | |
| 2311M84-906 | O-Ring Installation Tool (2 IT) | 1 | |
| 2315T381 | WATER RESISTANT PHENOLIC WHEEL WITH ROLLER BERING, 6" DIAMETER X2" WIDE, FOR 1/2" AXLE | 1 | |
| 23301 | ADB 1/2"-13 X 1.07" SAFETY ENGINEERED SWIVEL HOIST RING - 2500 LBS | 1 | |
| 235508-15 | SPRING MATCHED PART, USED WITH ITEM NUMBER 240 | 1 | |
| 2370-T070-401 | GSE 123 SPRING MOUNTING TOOL | 6 | |
| 2488-20 | MILWAUKEE M12 SOLDERING IRON KIT 2488-20 | 1 | |
| 24AC62 | SOLDERING STATION, 50W,220V | 1 | |
| 250-ML-JUG | MEASURING 250 ML BEAKER TOOL | 1 | |
| 2558817TE | BEARING CUP REMOVAL (IN) 2558819 AND | 1 | |
| 25AN 5/16 X 11/32 | STAHLWILLE 25AN RATCHET RING SPANNER 5/16″ X 11/32″ | 2 | |
| 25X2 | O'RING EPDM 25X2 | 1 | |
| 26.A.1/4.X.5/16 | 25ASP RATCHET RING 1/4” X 5/16” | 1 | |
| 26.A.3/8.X.7/16 | 25ASP RATCHET RING 3/8” X 7/16” | 1 | |
| 269A9212 | Spud - 269A1231 Bearing Set Install | 1 | |
| 269A9233 | Plug 269A5050-12 Bearing Removal | 1 | |
| 269A9234 | Punch - 269A5050-14 Bearing Install | 1 | |
| 269A9236 | Plug 269A5050-14 Bearing Removal | 1 | |
| 269A9238 | Plug 269A5050-15 Bearing Removal | 1 | |
| 269A9241 | Punch & Block 269A5050-44 Bearing Installation | 1 | |
| 269A9282 | Punch 269A5050-19 Bearing Installation | 1 | |
| 269A9294 | Overhaul Tool 269A5174 Bearing Oil Pump | 1 | |
| 269A9296 | Bar Assembly, 269A5050-11 Bearing Clip Removal | 1 | |
| 269A9338 | Plug 269A5050-15 Bearing Removal | 1 | |
| 27-01-3679 | LOCK TOOL AIL SPRING TAB (MV7627-5-02) | 1 | |
| 274164-1-1 | Bearing Press fixtu (2 IT) | 1 | |
| 2805542-1-TK | BEARING TOOL KIT (2 ITEMS) | 1 | |
| 29-07 | SPLIT RINGS 21mmODX18mmIDX3mmTH. STEEL ZINC | 1 | |
| 29218.RI.I19 | Norbar 29218.RI.I19 - 1 3/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I20 | Norbar 29218.RI.I20 - 1 1/4" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I21 | Norbar 29218.RI.I21 - 1 5/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I22 | Norbar 29218.RI.I22 - 1 3/8" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I23 | Norbar 29218.RI.I23 - 1 7/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I24 | Norbar 29218.RI.I24 - 1 1/2" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I25 | Norbar 29218.RI.I25 - 1 9/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I26 | Norbar 29218.RI.I26 - 1 5/8" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I27 | Norbar 29218.RI.I27 - 1 11/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I28 | Norbar 29218.RI.I28 - 1 3/4" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I29 | Norbar 29218.RI.I29 - 1 13/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I30 | Norbar 29218.RI.I30 - 1 7/8" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I31 | Norbar 29218.RI.I31 - 1 15/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I32 | Norbar 29218.RI.I32 - 2" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I33 | Norbar 29218.RI.I33 - 2 1/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I34 | Norbar 29218.RI.I34 - 2 1/8" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I35 | Norbar 29218.RI.I35 - 2 3/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I36 | Norbar 29218.RI.I36 - 2 1/4" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I37 | Norbar 29218.RI.I37 - 2 5/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I38 | Norbar 29218.RI.I38 - 2 3/8" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I39 | Norbar 29218.RI.I39 - 2 7/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I40 | Norbar 29218.RI.I40 - 2 1/2" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I41 | Norbar 29218.RI.I41 - 2 9/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I42 | Norbar 29218.RI.I42 - 2 5/8" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I43 | Norbar 29218.RI.I43 - 2 11/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I44 | Norbar 29218.RI.I44 - 2 3/4" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I45 | Norbar 29218.RI.I45 - 2 13/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I46 | Norbar 29218.RI.I46 - 2 7/8" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I47 | Norbar 29218.RI.I47 - 2 15/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I48 | Norbar 29218.RI.I48 - 3" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I49 | Norbar 29218.RI.I49 - 3 1/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I50 | Norbar 29218.RI.I50 - 3 1/8" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I51 | Norbar 29218.RI.I51 - 3 3/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I52 | Norbar 29218.RI.I52 - 3 1/4" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M30 | Norbar 29218.RI.M30 - 30mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M31 | Norbar 29218.RI.M31 - 31mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M32 | Norbar 29218.RI.M32 - 32mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M33 | Norbar 29218.RI.M33 - 33mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M34 | Norbar 29218.RI.M34 - 34mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M35 | Norbar 29218.RI.M35 - 35mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M36 | Norbar 29218.RI.M36 - 36mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M37 | Norbar 29218.RI.M37 - 37mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M38 | Norbar 29218.RI.M38 - 38mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M39 | Norbar 29218.RI.M39 - 39mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M40 | Norbar 29218.RI.M40 - 40mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M41 | Norbar 29218.RI.M41 - 41mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M42 | Norbar 29218.RI.M42 - 42mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M43 | Norbar 29218.RI.M43 - 43mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M44 | Norbar 29218.RI.M44 - 44mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M45 | Norbar 29218.RI.M45 - 45mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M46 | Norbar 29218.RI.M46 - 46mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M47 | Norbar 29218.RI.M47 - 47mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M48 | Norbar 29218.RI.M48 - 48mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M49 | Norbar 29218.RI.M49 - 49mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M50 | Norbar 29218.RI.M50 - 50mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M51 | Norbar 29218.RI.M51 - 51mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M52 | Norbar 29218.RI.M52 - 52mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M53 | Norbar 29218.RI.M53 - 53mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M54 | Norbar 29218.RI.M54 - 54mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M55 | Norbar 29218.RI.M55 - 55mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M56 | Norbar 29218.RI.M56 - 56mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M57 | Norbar 29218.RI.M57 - 57mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M58 | Norbar 29218.RI.M58 - 58mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M59 | Norbar 29218.RI.M59 - 59mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M60 | Norbar 29218.RI.M60 - 60mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M61 | Norbar 29218.RI.M61 - 61mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M62 | Norbar 29218.RI.M62 - 62mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M63 | Norbar 29218.RI.M63 - 63mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M64 | Norbar 29218.RI.M64 - 64mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M65 | Norbar 29218.RI.M65 - 65mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M66 | Norbar 29218.RI.M66 - 66mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M67 | Norbar 29218.RI.M67 - 67mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M68 | Norbar 29218.RI.M68 - 68mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M69 | Norbar 29218.RI.M69 - 69mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M70 | Norbar 29218.RI.M70 - 70mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M71 | Norbar 29218.RI.M71 - 71mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M72 | Norbar 29218.RI.M72 - 72mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M73 | Norbar 29218.RI.M73 - 73mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M74 | Norbar 29218.RI.M74 - 74mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M75 | Norbar 29218.RI.M75 - 75mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M76 | Norbar 29218.RI.M76 - 76mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M77 | Norbar 29218.RI.M77 - 77mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M78 | Norbar 29218.RI.M78 - 78mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M79 | Norbar 29218.RI.M79 - 79mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M80 | Norbar 29218.RI.M80 - 80mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RO.I19 | Norbar 29218.RO.I19 - 1 3/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I20 | Norbar 29218.RO.I20 - 1 1/4" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I21 | Norbar 29218.RO.I21 - 1 5/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I22 | Norbar 29218.RO.I22 - 1 3/8" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I23 | Norbar 29218.RO.I23 - 1 7/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I24 | Norbar 29218.RO.I24 - 1 1/2" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I25 | Norbar 29218.RO.I25 - 1 9/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I26 | Norbar 29218.RO.I26 - 1 5/8" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I27 | Norbar 29218.RO.I27 - 1 11/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I28 | Norbar 29218.RO.I28 - 1 3/4" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I29 | Norbar 29218.RO.I29 - 1 13/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I30 | Norbar 29218.RO.I30 - 1 7/8" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I31 | Norbar 29218.RO.I31 - 1 15/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I32 | Norbar 29218.RO.I32 - 2" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I33 | Norbar 29218.RO.I33 - 2 1/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I34 | Norbar 29218.RO.I34 - 2 1/8" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I35 | Norbar 29218.RO.I35 - 2 3/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I36 | Norbar 29218.RO.I36 - 2 1/4" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I37 | Norbar 29218.RO.I37 - 2 5/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I38 | Norbar 29218.RO.I38 - 2 3/8" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I39 | Norbar 29218.RO.I39 - 2 7/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I40 | Norbar 29218.RO.I40 - 2 1/2" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I41 | Norbar 29218.RO.I41 - 2 9/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I42 | Norbar 29218.RO.I42 - 2 5/8" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I43 | Norbar 29218.RO.I43 - 2 11/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I44 | Norbar 29218.RO.I44 - 2 3/4" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I45 | Norbar 29218.RO.I45 - 2 13/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I46 | Norbar 29218.RO.I46 - 2 7/8" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I47 | Norbar 29218.RO.I47 - 2 15/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I48 | Norbar 29218.RO.I48 - 3" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I49 | Norbar 29218.RO.I49 - 3 1/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I50 | Norbar 29218.RO.I50 - 3 1/8" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I51 | Norbar 29218.RO.I51 - 3 3/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I52 | Norbar 29218.RO.I52 - 3 1/4" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M30 | Norbar 29218.RO.M30 - 30mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M31 | Norbar 29218.RO.M31 - 31mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M32 | Norbar 29218.RO.M32 - 32mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M33 | Norbar 29218.RO.M33 - 33mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M34 | Norbar 29218.RO.M34 - 34mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M35 | Norbar 29218.RO.M35 - 35mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M36 | Norbar 29218.RO.M36 - 36mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M37 | Norbar 29218.RO.M37 - 37mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M38 | Norbar 29218.RO.M38 - 38mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M39 | Norbar 29218.RO.M39 - 39mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M40 | Norbar 29218.RO.M40 - 40mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M41 | Norbar 29218.RO.M41 - 41mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M42 | Norbar 29218.RO.M42 - 42mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M43 | Norbar 29218.RO.M43 - 43mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M44 | Norbar 29218.RO.M44 - 44mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M45 | Norbar 29218.RO.M45 - 45mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M46 | Norbar 29218.RO.M46 - 46mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M47 | Norbar 29218.RO.M47 - 47mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M48 | Norbar 29218.RO.M48 - 48mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M49 | Norbar 29218.RO.M49 - 49mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M50 | Norbar 29218.RO.M50 - 50mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M51 | Norbar 29218.RO.M51 - 51mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M52 | Norbar 29218.RO.M52 - 52mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M53 | Norbar 29218.RO.M53 - 53mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M54 | Norbar 29218.RO.M54 - 54mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M55 | Norbar 29218.RO.M55 - 55mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M56 | Norbar 29218.RO.M56 - 56mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M57 | Norbar 29218.RO.M57 - 57mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M58 | Norbar 29218.RO.M58 - 58mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M59 | Norbar 29218.RO.M59 - 59mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M60 | Norbar 29218.RO.M60 - 60mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M61 | Norbar 29218.RO.M61 - 61mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M62 | Norbar 29218.RO.M62 - 62mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M63 | Norbar 29218.RO.M63 - 63mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M64 | Norbar 29218.RO.M64 - 64mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M65 | Norbar 29218.RO.M65 - 65mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M66 | Norbar 29218.RO.M66 - 66mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M67 | Norbar 29218.RO.M67 - 67mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M68 | Norbar 29218.RO.M68 - 68mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M69 | Norbar 29218.RO.M69 - 69mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M70 | Norbar 29218.RO.M70 - 70mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M71 | Norbar 29218.RO.M71 - 71mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M72 | Norbar 29218.RO.M72 - 72mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M73 | Norbar 29218.RO.M73 - 73mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M74 | Norbar 29218.RO.M74 - 74mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M75 | Norbar 29218.RO.M75 - 75mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M76 | Norbar 29218.RO.M76 - 76mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M77 | Norbar 29218.RO.M77 - 77mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M78 | Norbar 29218.RO.M78 - 78mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M79 | Norbar 29218.RO.M79 - 79mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M80 | Norbar 29218.RO.M80 - 80mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 294861-1 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN LARGER ID OF 3860168I STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294861-2 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN SMALLER ID OF 38601681 STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294866-10 | BEARING REMOVAL TOOL (LOCATES SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEARSHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | 1 | |
| 294866-2 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR | 1 | |
| 294866-5 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 294866-6 | BEARING REMOVAL ADAPTER (LOCATES LARGER INSIDE DIAMETER OF 3860180-2 SPUR GEARSHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEARSHAFT FROM 3605094-1 BEARING | 1 | |
| 294866-7 | BEARING REMOVAL TOOL (USED TO LOCATE IN LARGER ID OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892576-1 BEARING) | 1 | |
| 294866-8 | BEARING REMOVAL TOOL (USED TO LOCATE IN SMALLER ID OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 294868-1 | BEARING REMOVAL PLATE (SUPPORTS 358024 BEARING WHEN REMOVING | 1 | |
| 294870-3 | BEARING REMOVAL PLATE (SUPPORTS 358027 BEARING WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM BEARING) | 1 | |
| 294870-5 | BEARING REMOVAL PLATE (SUPPORTS 3605094-1 BEARING WHEN REMOVING 3860180-2 SPUR GEARSHAFT FROM BEARING) | 1 | |
| 294870-7 | BEARING REMOVAL PLATE (USED TO SUPPORT 892575-1 BEARING WHEN REMOVING 3860167-1 SPLINED SHAFT FROM BEARING) | 1 | |
| 294879-1 | BEARING MECHANICAL PULLER (REMOVES 3822071-1 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND | 1 | |
| 294881-3 | ROTOR AND BEARING MECHANICAL PULLER (REMOVES OIL SLINGER ROTOR AND BEARING FROM COUPLING (ALTERNATE TO 294881-1)) | 1 | |
| 294886-1 | ROTATING ASSEMBLY HOLDER (TO LOCATE INSIDE DIAMETER OF 3822065-1 SHAFT COUPLING AND SUPPORT THE ROTATING GROUP DURING SHAFT STRETCH) | 1 | |
| 294892-1 | DRIVEN COMPRESSOR BEARING PULLER (REMOVES 3822099-1 BEARING AND 3826125-1 SEAL CARRIER FROM 3822075-2 MAIN SHAFT) | 1 | |
| 2967-20 | M18 FUEL 18V LITHIUM-ION BRUSHLESS CORDLESS 1/2 IN. IMPACT WRENCH WITH FRICTION RING (TOOL-ONLY) | 1 | |
| 297292-1 | (NSN: 5220-01-687-5924), GAGE, RING, MASTER SETTING | 1 | |
| 2C14071G01 | PULLER-CAGE, FAN SPEED SENSOR AND NO.2 BEARING INNER RACE | 1 | |
| 2C14108G01TK | RING SET ASSEMBLY – STAGE 2 HPT NOZZLE | 1 | |
| 2C14138G01 | FIXTURE REMOVAL MATING SEAL RINGS ACC GEARBOX CF6-80C2 | 11 | |
| 2C14138G02 | FIXTURE REMOVAL MATING SEAL RINGS ACC GEARBOX CF6-80C2 | 12 | |
| 2C14637G01 | WRENCH, SPANNER NUT ‐ NO. 2 BEARING INNER RACE | 1 | |
| 2C14637G01TK | WRENCH, SPANNER NO.2 BEARING NUT, SEAL, GEAR | 1 | |
| 2C14698 | PULLER # 2 BEARING | 1 | |
| 2C14698G01 | PULLER, NO.2 ROLLER BEARING | 2 | |
| 2C14783 | RING SET, ASSEMBLY-STG 2 HP TURB NOZZLE | 1 | |
| 2C14783G01 | RING SET, ASSEMBLY-STAGE 2 HPT NOZZLE | 1 | |
| 2C14783G02 | RING SET, ASSY - STG 2 HTP NOZ | 1 | |
| 2C14922 | BEARING FOR 2C14922 | 1 | |
| 2C5192G01 | WRENCH, Nº 2 BEARING LOCKNUT SPANNER | 1 | |
| 2C5223 | GUIDE #1 & #2 BEARING HOUSING | 1 | |
| 2C5223P01 | GUIDE, NO.1 AND 2 BEARING HOUSING GUIDE | 1 | |
| 2C5263G01 | FIXTURE - #1 & #2 BEARING HOUSING | 1 | |
| 2C6128G01TK | WRENCH, SPANNER NUT, NO.2 BEARING | 1 | |
| 2C6139 | PULLER - NO 2 & NO 3 ROLLER - BEARING | 1 | |
| 2C6139G02 | PULLER 2 ROLLER/3 ROLLER BEARING OUTER RACE | 1 | |
| 2C6139G02TK | PULLER,-NO.2&NO.3 ROLLER BEARING | 1 | |
| 2C6836G01 | PUSHER.INNER RACE- #2 BEARING | 1 | |
| 2C6895G01 | FIXTURE, RUNOUT NO.1 AND NO.2 BEARING HOUSING. | 1 | |
| 2C81055 | PULLER #1 & #2 BEARING HOUSING | 1 | |
| 2C81055G01 | PULLER #1 & #2 BEARING HOUSING | 1 | |
| 2C81111G01 | PULLER, NO. 2 BEARING INNER RACE | 1 | |
| 2C81440 | RING, SUPPORT STAGE 2 HPTR | 1 | |
| 2C81440P01 | RING, SUPPORT - STAGE 2 DISK, HPT | 1 | |
| 2C81453P01 | RING, ASSEMBLE STAGE 1 TO STAGE 2 | 1 | |
| 2C81591G01 | FIXTURE, SHROUD RING N0 3 POST SB 72-0138 | 1 | |
| 2C81673P01 | 2C81673P01 BEARING (GUIDE PIN) | 1 | |
| 2C90531G01 | PIN RIG, ACT RING, STAGE 1 & 2 | 1 | |
| 2C91021G01 | PULLER Nº2 BEARING | 1 | |
| 2C91024G01 | PUSHER, NO. 2 BEARING OUTER RACE | 1 | |
| 2C91025G01 | PUSHER - #2 BEARING I/R | 1 | |
| 2C91025P01 | PUSHER , Nº2 BEARING INNER RACE | 1 | |
| 2C91146P01 | BEARING-BALANCE SLAVE #2 | 1 | |
| 2C91284G01 | RING - STG 2 SHROUD | 1 | |
| 2MIT65B03670 | KIT - TOOL, HORIZONTAL STABILIZER HINGE BOLT BEARING REPLACEMENT, SPL-5052 | 6 | |
| 2MIT65B90361 | TOOL - REMOVAL, 60B00180-302 BEARING | 1 | |
| 2TSJ65B01503 | TEST FITTING ASSY - HYDRAULIC ACTUATOR ASSY, NOSE GEAR STEERING, BODY CRES 2 7/8 DIA. X 2 3/4 | 2 | |
| 2Z/7T | BAHCO 2Z/7T 1/4" - 7/8" DEEP OFFSET DOUBLE RING-END WRENCH SET – 7 PIECES | 1 | |
| 3-1531-3 | WHEEL AND BEARING PROTECTOR SET (A320 NOSE) YELLOW | 1 | |
| 3-1560 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS 21 X 7.25 - 10 | 1 | |
| 3-1609-1 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS 13.461 - 13.466 (341,91 - 342,04) | 1 | |
| 3-1610-1 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS 7.968/7.990 (202,39 - 202,95) | 1 | |
| 3-6C-52 | 3/4 SHX SKT 1/2 DR W/RET RING | 1 | |
| 3-902V0894 | OÕRING VITON POUR 2HP50N-SS | 1 | |
| 3-912V0894 | OÕRING VITON POUR 12-8F50G5-S | 1 | |
| 30-804-2140 | Sylvac 30-804-2140 M-Bus Multiplexer Unit PS Measuring Bench | 1 | |
| 30-900-1002 | Sylvac 30-900-1002 Transducer Probe P5BL Linear Measuring Range +/- 5mm/0.2" | 1 | |
| 30-900-1003 | Sylvac 30-900-1003 Transducer Probe P5V Linear Measuring Range 5mm/0.2" | 1 | |
| 30-900-1006 | Sylvac 30-900-1006 Transducer Probe P5L Linear Measuring Range 5mm/0.2" | 1 | |
| 30-900-1007 | Sylvac 30-900-1007 Transducer Probe P5BVL Linear Measuring Range 5mm/0.2" | 1 | |
| 30-900-1008 | Sylvac 30-900-1008 Transducer Probe P5VL Linear Measuring Range 5mm/0.2" | 1 | |
| 30-900-1025 | Sylvac 30-900-1025 Transducer Probe P25 Linear Measuring Range 25mm/1" | 1 | |
| 30-900-1101 | Sylvac 30-900-1101 Transducer Probe P2I Linear Measuring Range +/- 2mm/0.8" | 1 | |
| 30-900-1102 | Sylvac 30-900-1102 Transducer Probe P2IP Linear Measuring Range +/- 2mm/0.8" | 1 | |
| 30-900-1111 | Sylvac 30-900-1111 Transducer Probe P5I Linear Measuring Range +/- 5mm/0.2" | 1 | |
| 30-900-1112 | Sylvac 30-900-1112 Transducer Probe P5I Linear Measuring Range +/- 5mm/0.2" | 1 | |
| 3179T000 | SPRING COMPRESSOR (2IT) | 1 | |
| 3201-0410 | BALL LOCK PIN 1/4 X 1.00 RING HANDLE DOUBLE ACTING STAINLESS 3201-0410 | 1 | |
| 32415-001 | MARATHON SYRINGE 20CC | 4 | |
| 332A94-3404-20 | TARGET FOR BEARINGS NO. 2 TO NO. 6 | 1 | |
| 332A94340420 | PATTERN FOR BEARING N°2 TO N°6 | 1 | |
| 34-200 | rep . by S4-200 SPRING | 1 | |
| 354A | CUP: BEARING,ROLLER,TAPERED, MADE TO CLASS 2 W/CODE 629 | 4 | |
| 5.32 | 32MM HEAVY DUTY RING SPANNERS | 1 | |
| 8.32 | 32MM STRIKING RING SPANNERS | 1 | |
| 36 | Tennsmith® Squaring Shears (Capacity (mild/stainless): 16 / 20 ga.) (Maximum cutting length: 37") (Gauge ranges (back/front): 30" / 37") (Shipping weight: 700 lbs (318 kgs)) (Add to cart: Add To Cart) | 1 | |
| 360-1234 | Mitutoyo 360-1234 - CARB-Apex Car Body Measuring System | 1 | |
| 360-4321 | Mitutoyo 360-4321 - CARB-Strato Car Body Measuring System | 1 | |
| 36307.210.005 | SPRING DISC 20X10.2X0.5 | 1 | |
| 3638AS200-1 | AN/AWM-102 NAVAIR FIRING CIRCUIT TEST | 2 | |
| 52 | Tennsmith® Squaring Shears (Capacity (mild/stainless): 16 / 20 ga.) (Maximum cutting length: 37") (Gauge ranges (back/front): 30" / 37") (Shipping weight: 700 lbs (318 kgs)) (Add to cart: Add To Cart) (Capacity (mild/stainless): 16 / 20 ga.) (Maximum cutt | 5 | |
| 440.22 | 3/8DR X 22MM CROW RING SPANNER | 1 | |
| 440.4 | 1/2DR X 40MM CROW-RING SPANNER | 1 | |
| 508 | Moore & Wright Spring Divider 8"/200mm | 1 | |
| 518 | Moore & Wright Spring Inside Caliper 8"/200mm | 1 | |
| 528 | Moore & Wright Spring Outside Caliper 8"/200mm | 1 | |
| 542 | ECON SPRING TENS CLAMP STL 2" | 4 | |
| 882 | 882-BIT HOLDER RETAINING RING FOR DRIVER (BETA) | 1 | |
| 4010 | O-RING CARRE .239IDX.375ODX0.70THICK | 1 | |
| 5010 | Moore & Wright Spring Divider 10"/250mm | 1 | |
| 5012 | Moore & Wright Spring Divider 12"/300mm | 1 | |
| 5110 | Moore & Wright Spring Inside Caliper 10"/250mm | 1 | |
| 5112 | Moore & Wright Spring Inside Caliper 12"/300mm | 1 | |
| 5210 | Moore & Wright Spring Outside Caliper 10"/250mm | 1 | |
| 5212 | Moore & Wright Spring Outside Caliper 12"/300mm | 1 | |
| 6720 | RING: SNAP,ASSEMBLY, SR-125 | 2 | |
| 8754 | 12 Ton Shoring Jack | 1 | |
| 8851 | 25 Ton Shoring Jack | 1 | |
| 8853 | 25 Ton Shoring Jack | 1 | |
| 32206 | BEARING ROLLER 32206 | 1 | |
| 34301 | BEARING: CONE,ROLLER,TAPERED, MADE TO CLASS 2 W/CODE 629 | 7 | |
| 36330 | RING SPANNER FOR EXTENSION 22 MM NON SPARKING Cu-Be | 1 | |
| 36331 | RING SPANNER FOR EXTENSION 22 MM NON SPARKING Al-Bron | 1 | |
| 36397 | OFFSET SLOGGING RING WRENCH 42 MM NON SPARKING Cu-Be | 1 | |
| 36413 | OFFSET SLOGGING RING WRENCH 42 MM NON SPARKING Al-Bron | 1 | |
| 36480 | SLOGGING RING WRENCH 2.7/8" NON SPARKING Cu-Be | 1 | |
| 36481 | SLOGGING RING WRENCH 2.7/8" NON SPARKING Al-Bron | 1 | |
| 36490 | DOUBLE OFFSET RING WRENCH 26 - 28 MM NON SPARKING Cu-Be | 1 | |
| 36491 | DOUBLE OFFSET RING WRENCH 26 - 28 MM NON SPARKING Al-Bron | 1 | |
| 36496 | OFFSET SLOGGING RING WRENCH 125 MM NON SPARKING Cu-Be | 1 | |
| 36497 | OFFSET SLOGGING RING WRENCH 125 MM NON SPARKING Al-Bron | 1 | |
| 36554 | DOUBLE ENDED FLAT RING SPANNER 21 - 22 MM NON SPARKING Cu-Be | 1 | |
| 36555 | DOUBLE ENDED FLAT RING SPANNER 21 - 22 MM NON SPARKING Al-Bron | 1 | |
| 365G | Transducer Guide, 737 PT4 72-20-01, with string attached | 1 | |
| 369D23601-80910 | ANGLE MEASURING TOOL (P/N 369D23601-80910) | 1 | |
| 36A | Tennsmith® Squaring Shears (Capacity: 16 / 20 ga.) (Maximum cutting length: 37") (Gauge ranges (back/front): 30" / 37") (Strokes per minute: 40) (Shipping weight: 800 lbs (363 kgs)) (Add to cart: Add To Cart) | 1 | |
| 37051 | SLOGGING RING WRENCH 2" NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 37052 | SLOGGING RING WRENCH 2.15/16" NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 37053 | SLOGGING RING WRENCH 2" NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 37054 | SLOGGING RING WRENCH 2.15/16" NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 37104 | SLOGGING RING WRENCH 22 MM NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 37105 | SLOGGING RING WRENCH 22 MM NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 37106 | SLOGGING RING WRENCH 24 MM NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 37107 | SLOGGING RING WRENCH 24 MM NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 37108 | SLOGGING RING WRENCH 27 MM NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 37109 | SLOGGING RING WRENCH 27 MM NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 37112 | SLOGGING RING WRENCH 32 MM NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 37113 | SLOGGING RING WRENCH 32 MM NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 37142 | SLOGGING RING WRENCH 120 MM NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 37143 | SLOGGING RING WRENCH 120 MM NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 37166 | SLOGGING RING WRENCH 1.1/2" NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 37167 | SLOGGING RING WRENCH 1.1/2" NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 37170 | SLOGGING RING WRENCH 2.7/8" NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 37171 | SLOGGING RING WRENCH 2.7/8" NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 37172 | SLOGGING RING WRENCH 3.1/2" NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 38469 | DOUBLE OFFSET RING WRENCH 16 - 17 MM INOX SS420 | 1 | |
| 38823 | DOUBLE OFFSET RING WRENCH 6 - 7 MM SS420 INOX | 1 | |
| 38842 | DOUBLE OFFSET RING WRENCH 8 - 9 MM INOX SS420 | 1 | |
| 38843 | DOUBLE OFFSET RING WRENCH 10 - 11 MM INOX SS420 | 1 | |
| 38844 | DOUBLE OFFSET RING WRENCH 12 - 13 MM INOX SS420 | 1 | |
| 38845 | DOUBLE OFFSET RING WRENCH 14 - 15 MM INOX SS420 | 1 | |
| 38846 | DOUBLE OFFSET RING WRENCH 18 - 19 MM INOX SS420 | 1 | |
| 38847 | DOUBLE OFFSET RING WRENCH 20 - 22 MM INOX SS420 | 1 | |
| 38876 | DOUBLE OFFSET RING WRENCH 21 - 23 MM INOX SS420 | 1 | |
| 38881 | DOUBLE OFFSET RING WRENCH 24 - 26 MM INOX SS420 | 1 | |
| 38882 | DOUBLE OFFSET RING WRENCH 25 - 28 MM INOX SS420 | 1 | |
| 38883 | DOUBLE OFFSET RING WRENCH 30 - 32 MM INOX SS420 | 1 | |
| 38888 | DOUBLE OFFSET RING WRENCH 32 - 36 MM INOX SS420 | 1 | |
| 38889 | DOUBLE OFFSET RING WRENCH 38 - 42 MM INOX SS420 | 1 | |
| 38999 | DOUBLE OFFSET RING WRENCH 10 - 13 MM INOX SS420 | 1 | |
| 39098 | SLOGGING RING WRENCH 137 MM NON SPARKING Cu-Be (12 EDGES) | 1 | |
| 39099 | SLOGGING RING WRENCH 137 MM NON SPARKING Al-Bron (12 EDGES) | 1 | |
| 39100 2 X 20 | HEAVY TYPE SPRING PIN 2 X 20 MM STEEL | 1 | |
| 39610-7 | SPRING COTTER ¿7 YELLOW PASSIVATED DIN11024 | 1 | |
| 39630-6.5 | SPRING COTTER ¿6.5 YELLOW PASSIVATED DIN11024 | 1 | |
| 3G6220A02151 | 3G6220A02151 WASHER CONICAL RING | 1 | |
| 3G6405G04032 | TOOL KIT, T/R DUPLEX BEARING REM/INST (3G6405G00631, 3G6405G04132) | 1 | |
| 3MIT65B00162 | LOCK ASSEMBLY - NOSE GEAR MOORING/ JACKING FOR 2.24 INCH DIA STEERING PISTON ROD | 5 | |
| 3ZH93 | SCALE - SPRING, 0 TO 50 LBS (0 TO 222 N) | 1 | |
| 4-010/QN70 | QUATTRO RING 0.250 X 0.375 X 0.070 NITRILE | 1 | |
| 4-40-M30RW-2.5-304SS | FLOW MEASURING SECTION (FIXED ORIFICE, 55 TO 65 LB/MIN (24.9 TO 29.5 KG/MIN), RECOMMEND 6.0 INCHES (152.4 MM) LINE WITH 2.0 INCHES (50.8MM) ORIFICE PLATE) | 1 | |
| 40-42A82 | Bowers 40-42A82 Measuring Insert with offset Point M2.5mm Thread | 1 | |
| 4001254-1 | TIRE REMOVAL RING [ P/N CMM : AM20749 ] | 1 | |
| 4001256-1 | BEARING ALIGNMENT & GAP GAGE [ P/N CMM : AM29363 ] | 1 | |
| 4001257-1 | TIRE REMOVAL RING [ P/N CMM : AM20747 ] | 1 | |
| 402FA | 402FA AVIATION TUBE FLARING TOOL KIT | 3 | |
| 41005-01 | BCW Engineering 41005-01 Brown Phenolic 316 x 1-12 x 8 Hand Held Sealant Scraper | 2 | |
| 41006-01 | BCW Engineering 41006-01 Brown Phenolic 316 x 2 x 8 Hand Held Sealant Scraper | 2 | |
| 41141026-501 | TOOL, A220 FA SPRING INSTALL | 1 | |
| 412-240-009-101 | BEARING REMOVAL (412-240-009-101) | 1 | |
| 412-240-013-101 | RING (412-240-013-101) | 1 | |
| 4164003-8 | ROTOR BEARING DISASSEMBLY FIXTURE (2 IT) | 1 | |
| 4263PDSB | Spring Back Dimple Die Sets (Rivet size: 3/32") (Add to cart: Add To Cart) | 1 | |
| 4264PDSB | Spring Back Dimple Die Sets (Rivet size: 3/32") (Add to cart: Add To Cart) (Rivet size: 1/8") (Add to cart: Add To Cart) | 1 | |
| 4265PDSB | Spring Back Dimple Die Sets (Rivet size: 3/32") (Add to cart: Add To Cart) (Rivet size: 1/8") (Add to cart: Add To Cart) (Rivet size: 5/32") (Add to cart: Add To Cart) | 1 | |
| 429ESP | ARING 429ESP TX/RX | 1 | |
| 4460102-2 | TOOL, O-RING REPLACEMENT (O2 SHUTOFF VALVE) | 4 | |
| 45-163 | BLUE ADJUSTABLE BLADE RINGER™ STRIPPER2 | 6 | |
| 460003180-23 | KEEP RING - MLG A320NEO | 7 | |
| 460003180-24 | KEEP RING - MLG A320NEO | 18 | |
| 460003180-56 | KEEP RING - MLG A320NEO | 6 | |
| 460003180-80 | KEEP RING - MLG LOCKSTAY ACTR A320NEO | 6 | |
| 460003180/51 | KEEP RING (2 ITEMS) | 9 | |
| 460007422-1 | A320 STEERING ADAPTOR L/H TOOL | 1 | |
| 460007422-2 | A320 STEERING ADAPTOR R/H TOOL | 1 | |
| 460007423-1 | A320 STEERING ADAPTOR L/H TOOL | 1 | |
| 460007423-2 | A320 STEERING ADAPTOR R/H TOOL | 1 | |
| 4651812300-48 | HAMMER RIVET GUN 3X MODEL : CP4444 RUSAB / 17-3 XSP / EQVT BPM : 2160 WITH RETAINER SPRINGS ( HANDI , BEEHIVE , MECH-AID ) | 1 | |
| 468-179 | MICROMETER, INTERNAL, DIGITAL, 3 POINT, 250MM MEASURING RANGE, 0.005MM ACCURACY | 1 | |
| 47 9420_20 | TENSION SPRING BALANCE 20KG | 1 | |
| 479420 20 | TENSION SPRING BALANCE 20KG | 1 | |
| 48LBF | SPRING BALANCE 20DAN (48LBF) TOOL | 1 | |
| 4920-20-A0U-6565 | REMOVAL TOOL BEARING 2-300-059 | 1 | |
| 492A | CUP: BEARING,ROLLER,TAPERED, MADE TO CLASS 2 W/CODE 629 | 3 | |
| 4FL EM | Universal End Mills 240 ( Stering Carbide ) | 1 | |
| 4GP | PLUG, MS GAGE PORT, WITHO-RING(D18302 VALVE/REGULATORS) | 1 | |
| 4MIT65B01501 | DIE - BEARING STAKE, ROD END ASSEMBLY, 65B01521 AND 65B01537 | 1 | |
| 50-00802 | Apollo 50-00802 Measuring Frame range 100-150mm Gradution 0.01mm | 1 | |
| 50-00803 | Apollo 50-00803 Measuring Frame range 150-200mm Gradution 0.01mm | 1 | |
| 50-00804 | Apollo 50-00804 Measuring Frame range 200-250mm Gradution 0.01mm | 1 | |
| 50-00805 | Apollo 50-00805 Measuring Frame range 250-300mm Gradution 0.01mm | 1 | |
| 50-00812 | Apollo 50-00812 Measuring Frame range 400-450mm Gradution 0.01mm | 1 | |
| 5050C | IMPACT 1/2IN FRICTION RING | 1 | |
| 5050CL | IMPCT 1/2IN FRICTION RING LONG | 1 | |
| 5094PDSB | Spring Back Dimple Die Sets (Rivet size: 3/32") (Add to cart: Add To Cart) (Rivet size: 1/8") (Add to cart: Add To Cart) (Rivet size: 5/32") (Add to cart: Add To Cart) (Rivet size: #6) (Add to cart: Add To Cart) | 1 | |
| 5095PDSB | Spring Back Dimple Die Sets (Rivet size: 3/32") (Add to cart: Add To Cart) (Rivet size: 1/8") (Add to cart: Add To Cart) (Rivet size: 5/32") (Add to cart: Add To Cart) (Rivet size: #6) (Add to cart: Add To Cart) (Rivet size: #8) (Add to cart: Add To Cart) | 1 | |
| 5096PDSB | Spring Back Dimple Die Sets (Rivet size: 3/32") (Add to cart: Add To Cart) (Rivet size: 1/8") (Add to cart: Add To Cart) (Rivet size: 5/32") (Add to cart: Add To Cart) (Rivet size: #6) (Add to cart: Add To Cart) (Rivet size: #8) (Add to cart: Add To Cart) | 1 | |
| 50997 | 21 POCKETS TOOL BELT WITH 35 RINGS ACO | 1 | |
| 51107 | THRUST BALL BEARING 35ID X 52OD X 12 THICK | 1 | |
| 5120-00-109-4568 | PUSHER #2 BEARING TO COMP SHAFT - PACKAGING: LEVEL B QAC:C | 1 | |
| 5120-01-137-3558 | REMOVAL TOOL BEARING 2-300-059 | 1 | |
| 5120-01-482-9558 | PULLER DIFFUSER & #2 BEARING ASSY | 1 | |
| 5120-01-486-3207 | SET #2 BEARING SEAL | 1 | |
| 516-944-11 | GAGE BLOCK SET;|GAUGE BLOCKS STEEL,MEASURING,GRADE 2; | 1 | |
| 5203J | BALL BEARINGNSK 2 ROW 17 ID X 40 OD X 17.5 TH | 1 | |
| 5250C | IMPACT 1/2IN FRICTION RING | 1 | |
| 52A | Tennsmith® Squaring Shears (Capacity: 16 / 20 ga.) (Maximum cutting length: 37") (Gauge ranges (back/front): 30" / 37") (Strokes per minute: 40) (Shipping weight: 800 lbs (363 kgs)) (Add to cart: Add To Cart) (Capacity: 16 / 20 ga.) (Maximum cutting lengt | 1 | |
| 52H-1 PH | Tennsmith® Squaring Shears (Power: 1 Phase, 220V, 60Hz) (Maximum cut length: 52-1/4") (Gauge ranges: 30" Back37" Front) (Shipping weight: 1300 lbs (590 kgs)) (Add to cart: Add To Cart) | 1 | |
| 52H-3 PH | Tennsmith® Squaring Shears (Power: 1 Phase, 220V, 60Hz) (Maximum cut length: 52-1/4") (Gauge ranges: 30" Back37" Front) (Shipping weight: 1300 lbs (590 kgs)) (Add to cart: Add To Cart) (Power: 3 Phase, 220V*, 60Hz) (Maximum cut length: 52-1/4") (Gauge ran | 1 | |
| 53-RBH-2 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 53714A1300-01 | TOOL, A220 NLG BEARING REMVOAL | 1 | |
| 540A 2 1/8 | WRENCH CROW RING 2 1/8 | 1 | |
| 543-396B | Mitutoyo 543-396B ABSOLUTE Digimatic Indicator, Low Measuring Force Type ID-C, 12.7mm / .5" | 1 | |
| 54929 | OFFSET RING SPANNER FOR EXTENSION 2" | 1 | |
| 54930 | OFFSET RING SPANNER FOR EXTENSION 2.1/4" | 1 | |
| 54931 | OFFSET RING SPANNER FOR EXTENSION 2.1/2" | 1 | |
| 54932 | OFFSET RING SPANNER FOR EXTENSION 2.3/4" | 1 | |
| 54936 | OFFSET RING WRENCH FOR EXTENSION 2.9/16" | 1 | |
| 54942 | OFFSET SLOGGING RING WRENCH 140 MM PHOSPHATED (12 EDGES) | 1 | |
| 54943 | OFFSET SLOGGING RING WRENCH 145 MM PHOSPHATED (12 EDGES) | 1 | |
| 54944 | OFFSET SLOGGING RING WRENCH 150 MM PHOSPHATED (12 EDGES) | 1 | |
| 54945 | OFFSET SLOGGING RING WRENCH 155 MM PHOSPHATED (12 EDGES) | 1 | |
| 54950 | CURVED SLOGGING RING WRENCH 22 MM | 1 | |
| 54951 | CURVED SLOGGING RING WRENCH 24 MM | 1 | |
| 54952 | CURVED SLOGGING RING WRENCH 27 MM | 1 | |
| 54954 | CURVED SLOGGING RING WRENCH 32 MM | 1 | |
| 54998 | OFFSET SLOGGING RING WRENCH 34 MM PHOSPHATED (12 EDGES) | 1 | |
| 55000 | OFFSET SLOGGING RING WRENCH 22 MM PHOSPHATED (12 EDGES) | 1 | |
| 55001 | OFFSET SLOGGING RING WRENCH 24 MM PHOSPHATED (12 EDGES) | 1 | |
| 55002 | OFFSET SLOGGING RING WRENCH 27 MM PHOSPHATED (12 EDGES) | 1 | |
| 55003 | OFFSET SLOGGING RING WRENCH 30 MM PHOSPHATED (12 EDGES) | 1 | |
| 55004 | OFFSET SLOGGING RING WRENCH 32 MM PHOSPHATED (12 EDGES) | 1 | |
| 55005 | OFFSET SLOGGING RING WRENCH 36 MM PHOSPHATED (12 EDGES) | 1 | |
| 55006 | OFFSET SLOGGING RING WRENCH 38 MM PHOSPHATED (12 EDGES) | 1 | |
| 55007 | OFFSET SLOGGING RING WRENCH 41 MM PHOSPHATED (12 EDGES) | 1 | |
| 55008 | OFFSET SLOGGING RING WRENCH 46 MM PHOSPHATED (12 EDGES) | 1 | |
| 55009 | OFFSET SLOGGING RING WRENCH 50 MM PHOSPHATED (12 EDGES) | 1 | |
| 55010 | OFFSET SLOGGING RING WRENCH 55 MM PHOSPHATED (12 EDGES) | 1 | |
| 55011 | OFFSET SLOGGING RING WRENCH 60 MM PHOSPHATED (12 EDGES) | 1 | |
| 55012 | OFFSET SLOGGING RING WRENCH 65 MM PHOSPHATED (12 EDGES) | 1 | |
| 55013 | OFFSET SLOGGING RING WRENCH 70 MM PHOSPHATED (12 EDGES) | 1 | |
| 55014 | OFFSET SLOGGING RING WRENCH 75 MM PHOSPHATED (12 EDGES) | 1 | |
| 55015 | OFFSET SLOGGING RING WRENCH 80 MM PHOSPHATED (12 EDGES) | 1 | |
| 55016 | OFFSET SLOGGING RING WRENCH 85 MM PHOSPHATED (12 EDGES) | 1 | |
| 55017 | OFFSET SLOGGING RING WRENCH 90 MM PHOSPHATED (12 EDGES) | 1 | |
| 55018 | OFFSET SLOGGING RING WRENCH 95 MM PHOSPHATED (12 EDGES) | 1 | |
| 55019 | OFFSET SLOGGING RING WRENCH 100 MM PHOSPHATED (12 EDGES) | 1 | |
| 55020 | OFFSET SLOGGING RING WRENCH 105 MM PHOSPHATED (12 EDGES) | 1 | |
| 55021 | OFFSET SLOGGING RING WRENCH 110 MM PHOSPHATED (12 EDGES) | 1 | |
| 55022 | OFFSET SLOGGING RING WRENCH 115 MM PHOSPHATED (12 EDGES) | 1 | |
| 55023 | OFFSET SLOGGING RING WRENCH 120 MM PHOSPHATED (12 EDGES) | 1 | |
| 55024 | OFFSET SLOGGING RING WRENCH 125 MM PHOSPHATED (12 EDGES) | 1 | |
| 55025 | OFFSET SLOGGING RING WRENCH 130 MM PHOSPHATED (12 EDGES) | 1 | |
| 55026 | OFFSET SLOGGING RING WRENCH 135 MM PHOSPHATED (12 EDGES) | 1 | |
| 55027 | OFFSET SLOGGING RING WRENCH 7/8" PHOSPHATED (12 EDGES) | 1 | |
| 55028 | OFFSET SLOGGING RING WRENCH 15/16" PHOSPHATED (12 EDGES) | 1 | |
| 55029 | OFFSET SLOGGING RING WRENCH 1" PHOSPHATED (12 EDGES) | 1 | |
| 55030 | OFFSET SLOGGING RING WRENCH 1.1/16" PHOSPHATED (12 EDGES) | 1 | |
| 55031 | OFFSET SLOGGING RING WRENCH 1.1/8" PHOSPHATED (12 EDGES) | 1 | |
| 55032 | OFFSET SLOGGING RING WRENCH 1.3/16" PHOSPHATED (12 EDGES) | 1 | |
| 55033 | OFFSET SLOGGING RING WRENCH 1.1/4" PHOSPHATED (12 EDGES) | 1 | |
| 55034 | OFFSET SLOGGING RING WRENCH 1.5/16" PHOSPHATED (12 EDGES) | 1 | |
| 55035 | OFFSET SLOGGING RING WRENCH 1.3/8" PHOSPHATED (12 EDGES) | 1 | |
| 55036 | OFFSET SLOGGING RING WRENCH 1.7/16" PHOSPHATED (12 EDGES) | 1 | |
| 55037 | OFFSET SLOGGING RING WRENCH 1.1/2" PHOSPHATED (12 EDGES) | 1 | |
| 55038 | OFFSET SLOGGING RING WRENCH 1.9/16" PHOSPHATED (12 EDGES) | 1 | |
| 55039 | OFFSET SLOGGING RING WRENCH 1.5/8" PHOSPHATED (12 EDGES) | 1 | |
| 55040 | OFFSET SLOGGING RING WRENCH 1.11/16" PHOSPHATED (12 EDGES) | 1 | |
| 55041 | OFFSET SLOGGING RING WRENCH 1.3/4" PHOSPHATED (12 EDGES) | 1 | |
| 55042 | OFFSET SLOGGING RING WRENCH 1.13/16" PHOSPHATED (12 EDGES) | 1 | |
| 55043 | OFFSET SLOGGING RING WRENCH 1.7/8" PHOSPHATED (12 EDGES) | 1 | |
| 55044 | OFFSET SLOGGING RING WRENCH 1.15/16" PHOSPHATED (12 EDGES) | 1 | |
| 55045 | OFFSET SLOGGING RING WRENCH 2" PHOSPHATED (12 EDGES) | 1 | |
| 55046 | OFFSET SLOGGING RING WRENCH 2.1/16" PHOSPHATED (12 EDGES) | 1 | |
| 55047 | OFFSET SLOGGING RING WRENCH 2.1/8" PHOSPHATED (12 EDGES) | 1 | |
| 55048 | OFFSET SLOGGING RING WRENCH 2.3/16" PHOSPHATED (12 EDGES) | 1 | |
| 55049 | OFFSET SLOGGING RING WRENCH 2.1/4" PHOSPHATED (12 EDGES) | 1 | |
| 55050 | OFFSET SLOGGING RING WRENCH 2.5/16" PHOSPHATED (12 EDGES) | 1 | |
| 55051 | OFFSET SLOGGING RING WRENCH 2.3/8" PHOSPHATED (12 EDGES) | 1 | |
| 55052 | OFFSET SLOGGING RING WRENCH 2.7/16" PHOSPHATED (12 EDGES) | 1 | |
| 55053 | OFFSET SLOGGING RING WRENCH 2.1/2" PHOSPHATED (12 EDGES) | 1 | |
| 55054 | OFFSET SLOGGING RING WRENCH 2.9/16" PHOSPHATED (12 EDGES) | 1 | |
| 55055 | OFFSET SLOGGING RING WRENCH 2.5/8" PHOSPHATED (12 EDGES) | 1 | |
| 55056 | OFFSET SLOGGING RING WRENCH 2.11/16" PHOSPHATED (12 EDGES) | 1 | |
| 55057 | OFFSET SLOGGING RING WRENCH 2.3/4" PHOSPHATED (12 EDGES) | 1 | |
| 55058 | OFFSET SLOGGING RING WRENCH 2.13/16" PHOSPHATED (12 EDGES) | 1 | |
| 55059 | OFFSET SLOGGING RING WRENCH 2.7/8" PHOSPHATED (12 EDGES) | 1 | |
| 55060 | OFFSET SLOGGING RING WRENCH 2.15/16" PHOSPHATED (12 EDGES) | 1 | |
| 55061 | OFFSET SLOGGING RING WRENCH 3" PHOSPHATED (12 EDGES) | 1 | |
| 55062 | OFFSET SLOGGING RING WRENCH 3.1/16" PHOSPHATED (12 EDGES) | 1 | |
| 55063 | OFFSET SLOGGING RING WRENCH 3.1/8" PHOSPHATED (12 EDGES) | 1 | |
| 55064 | OFFSET SLOGGING RING WRENCH 3.1/4" PHOSPHATED (12 EDGES) | 1 | |
| 55065 | OFFSET SLOGGING RING WRENCH 3.5/16" PHOSPHATED (12 EDGES) | 1 | |
| 55066 | OFFSET SLOGGING RING WRENCH 3.3/8" PHOSPHATED (12 EDGES) | 1 | |
| 55067 | OFFSET SLOGGING RING WRENCH 3.1/2" PHOSPHATED (12 EDGES) | 1 | |
| 55068 | OFFSET SLOGGING RING WRENCH 3.9/16" PHOSPHATED (12 EDGES) | 1 | |
| 55069 | OFFSET SLOGGING RING WRENCH 3.5/8" PHOSPHATED (12 EDGES) | 1 | |
| 55070 | OFFSET SLOGGING RING WRENCH 3.11/16" PHOSPHATED (12 EDGES) | 1 | |
| 55071 | OFFSET SLOGGING RING WRENCH 3.3/4" PHOSPHATED (12 EDGES) | 1 | |
| 55072 | OFFSET SLOGGING RING WRENCH 3.13/16" PHOSPHATED (12 EDGES) | 1 | |
| 55073 | OFFSET SLOGGING RING WRENCH 3.7/8" PHOSPHATED (12 EDGES) | 1 | |
| 55074 | OFFSET SLOGGING RING WRENCH 3.15/16" PHOSPHATED (12 EDGES) | 1 | |
| 55075 | OFFSET SLOGGING RING WRENCH 4" PHOSPHATED (12 EDGES) | 1 | |
| 55076 | OFFSET SLOGGING RING WRENCH 4.1/16" PHOSPHATED (12 EDGES) | 1 | |
| 55077 | OFFSET SLOGGING RING WRENCH 4.1/8" PHOSPHATED (12 EDGES) | 1 | |
| 55078 | OFFSET SLOGGING RING WRENCH 4.3/16" PHOSPHATED (12 EDGES) | 1 | |
| 55079 | OFFSET SLOGGING RING WRENCH 4.1/4" PHOSPHATED (12 EDGES) | 1 | |
| 55080 | OFFSET SLOGGING RING WRENCH 4.5/16" PHOSPHATED (12 EDGES) | 1 | |
| 55081 | OFFSET SLOGGING RING WRENCH 4.3/8" PHOSPHATED (12 EDGES) | 1 | |
| 55082 | OFFSET SLOGGING RING WRENCH 4.1/2" PHOSPHATED (12 EDGES) | 1 | |
| 55083 | OFFSET SLOGGING RING WRENCH 4.9/16" PHOSPHATED (12 EDGES) | 1 | |
| 55084 | OFFSET SLOGGING RING WRENCH 4.5/8" PHOSPHATED (12 EDGES) | 1 | |
| 55085 | OFFSET SLOGGING RING WRENCH 4.11/16" PHOSPHATED (12 EDGES) | 1 | |
| 55086 | OFFSET SLOGGING RING WRENCH 4.3/4" PHOSPHATED (12 EDGES) | 1 | |
| 55087 | OFFSET SLOGGING RING WRENCH 4.13/16" PHOSPHATED (12 EDGES) | 1 | |
| 55088 | OFFSET SLOGGING RING WRENCH 4.7/8" PHOSPHATED (12 EDGES) | 1 | |
| 55089 | OFFSET SLOGGING RING WRENCH 4.15/16" PHOSPHATED (12 EDGES) | 1 | |
| 55090 | OFFSET SLOGGING RING WRENCH 5" PHOSPHATED (12 EDGES) | 1 | |
| 55091 | OFFSET SLOGGING RING WRENCH 5.1/4" PHOSPHATED (12 EDGES) | 1 | |
| 55092 | OFFSET SLOGGING RING WRENCH 5.1/16" PHOSPHATED (12 EDGES) | 1 | |
| 5547-083 | TENSION SPRING BALANCE 20KG | 1 | |
| 55658 | DISPLAY OF DE 165 DOUBLE OFFSET RING WRENCHES 6 - 7 /20 - 22 MM AEROSPATIAL CHROME PLATING | 1 | |
| 56230 | SLIM DOUBLE RING WRENCH 7/32" - 1/4" 15º BENT AEROSPATIAL CHROME PLATING | 1 | |
| 56234 | SLIM DOUBLE RING WRENCH 1/2" - 9/16" 15º BENT AEROSPATIAL CHROME PLATING | 1 | |
| 56235 | SLIM FLAT DOUBLE RING WRENCH 7/32" - 1/4" AEROSPATIAL CHROME PLATING | 1 | |
| 56239 | SLIM FLAT DOUBLE RING WRENCH 1/2" - 9/16" AEROSPATIAL CHROME PLATING | 1 | |
| 56240 | SET OF 5 SLIM DOUBLE RING WRENCHES 7/32" -1/4" - 1/2" - 9/16" 15º BENT AEROSPATIAL CHROME PLATING | 1 | |
| 56241 | SET OF 5 SLIM FLAT DOUBLE RING WRENCHES 7/32" -1/4" A 1/2" - 9/16" AEROSPATIAL CHROME PLATING | 1 | |
| 56300 | SLOGGING RING WRENCH THIN WALL 27 MM | 1 | |
| 56302 | SLOGGING RING WRENCH THIN WALL 32 MM | 1 | |
| 56320 | SLOGGING RING WRENCH THIN WALL 120 MM | 1 | |
| 56326 | SLOGGING RING WRENCH THIN WALL 2" | 1 | |
| 56327 | SLOGGING RING WRENCH THIN WALL 2.3/16" | 1 | |
| 56328 | SLOGGING RING WRENCH THIN WALL 2.3/8" | 1 | |
| 56329 | SLOGGING RING WRENCH THIN WALL 2.9/16" | 1 | |
| 56330 | SLOGGING RING WRENCH THIN WALL 2.3/4" | 1 | |
| 56331 | SLOGGING RING WRENCH THIN WALL 2.15/16" | 1 | |
| 56333 | SLOGGING RING WRENCH THIN WALL 3.1/2" | 1 | |
| 57128 | SLOGGING RING WRENCH 118 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 57136 | SLOGGING RING WRENCH 6.1/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 57139 | SLOGGING RING WRENCH 6.1/4" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 57604 | FLARING BAR 5 SIZES (1/4 - 3/8 - 1/2 - 5/8 - 3/4") FOR RATCHET FLARING TOOL | 1 | |
| 57605 | FLARING BAR 6 SIZES (1/4 - 5/16- 3/8 - 1/2 - 5/8 - 3/4") FOR RATCHET FLARING TOOL | 1 | |
| 57606 | FLARING BAR 8 SIZES (1/8 - 3/16 -1/4 - 3/8 - 1/2 - 5/8 - 3/4") FOR RATCHET FLARING TOOL | 1 | |
| 57607 | FLARING BAR 5 SIZES (6, 8, 10, 12, 15 MM) FOR RATCHET FLARING TOOL | 1 | |
| 57608 | FLARING BAR 6 SIZES(6, 8, 10, 12, 16, 18 MM) FOR RATCHET FLARING TOOL | 1 | |
| 57609 | FLARING BAR 8 SIZES (6, 8, 10, 12, 11, 15, 16, 18 MM) FOR RATCHET FLARING TOOL | 1 | |
| 57610 | RATCHET FLARING TOOL 5 SIZES (1/4, 3/8, 1/2, 5/8, 3/4 ") | 1 | |
| 57611 | RATCHET FLARING TOOL 6 SIZES (1/4, 5/16, 3/8, 1/2, 5/8, 3/4") | 1 | |
| 57612 | RATCHET FLARING TOOL 8 SIZES (1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4") | 1 | |
| 57613 | RATCHET FLARING TOOL 5 SIZES (6, 8, 10, 12, 15 MM) | 1 | |
| 57614 | RATCHET FLARING TOOL 6 SIZES (6, 8, 10, 12, 16, 18 MM) | 1 | |
| 57615 | RATCHET FLARING TOOL 8 SIZES (6, 8, 10, 12, 14, 15, 16, 18 MM) | 1 | |
| 57616 | RATCHET FLARING TOOL 10 SIZES (6, 8, 10, 12, 15 MM 1/4 - 3/8 - 1/2 - 5/8 - 3/4") | 1 | |
| 57617 | RATCHET FLARING TOOL 12 SIZES (6, 8, 10, 12, 16, 18 MM 1/4 - 5/16 -3/8 - 1/2 - 5/8 - 3/4") | 1 | |
| 57618 | RATCHET FLARING TOOL 16 SIZES (6, 8, 10, 12, 14, 15, 16, 18 MM 1/8- 3/16- 1/4 - 5/16 -3/8 - 1/2 - 5/8 - 3/4") | 1 | |
| 57720 | TORX RING WRENCH E10 X E12 | 1 | |
| 57722 | TORX RING WRENCH E16 X E22 | 1 | |
| 57723 | TORX RING WRENCH E20 X E24 | 1 | |
| 57776 | DOUBLE ENDED FLAT RING WRENCH 1/2" - 9/16" | 1 | |
| 57826-5000 | 1.00/1.27mm I/O Cable Wiring Jig | 1 | |
| 57827-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57832-5000 | 1.00/1.27mm I/O Cable Wiring Jig | 1 | |
| 57833-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57837-5000 | 1.00/1.27mm I/O Cable Wiring Jig | 1 | |
| 57838-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57843-5000 | 1.00/1.27mm I/O Cable Wiring Jig | 1 | |
| 57844-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57848-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57849-5000 | 1.00/1.27mm I/O Cable Wiring Jig | 1 | |
| 57850-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57856-5000 | 1.00/1.27mm I/O Cable Wiring Jig | 1 | |
| 57860-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57862-5000 | 1.00/1.27mm I/O Cable Wiring Jig | 1 | |
| 57863-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57883-5000 | 1.00/1.27mm I/O Cable Wiring Jig | 1 | |
| 57884-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57888-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57889-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 58-366 | IN-OUT DEBURRING TOOL 3/32 | 1 | |
| 58-368 | IN-OUT DEBURRING TOOL 5/32 | 1 | |
| 58055 | SLOGGING RING WRENCH 6.3/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 58056 | SLOGGING RING WRENCH 6.1/2" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 58057 | SLOGGING RING WRENCH 6.9/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 58058 | SLOGGING RING WRENCH 6.5/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 58059 | SLOGGING RING WRENCH 6.3/4" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 58060 | SLOGGING RING WRENCH 6.7/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 58061 | SLOGGING RING WRENCH 7" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 58062 | SLOGGING RING WRENCH 7.1/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 58063 | SLOGGING RING WRENCH 7.1/4" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 58064 | SLOGGING RING WRENCH 7.3/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 58065 | SLOGGING RING WRENCH 7.1/2" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 58066 | SLOGGING RING WRENCH 7.9/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 58067 | SLOGGING RING WRENCH 7.5/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 58068 | SLOGGING RING WRENCH 7.3/4" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 58069 | SLOGGING RING WRENCH 7.7/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 58070 | SLOGGING RING WRENCH 8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 58071 | SLOGGING RING WRENCH 3.3/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 58233A0000-01 | BEARING INSTALLATION TOOL (58233A0000-01) | 1 | |
| 58233A0000-01PM | BEARING INSTALLATION TOOL (58233A0000-01) | 1 | |
| 58361 | CURVED SLOGGING RING WRENCH 20 MM | 1 | |
| 58362 | CURVED SLOGGING RING WRENCH 21 MM | 1 | |
| 58363 | CURVED SLOGGING RING WRENCH 23 MM | 1 | |
| 58364 | CURVED SLOGGING RING WRENCH 25 MM | 1 | |
| 58365 | CURVED SLOGGING RING WRENCH 26 MM | 1 | |
| 58366 | CURVED SLOGGING RING WRENCH 28 MM | 1 | |
| 58367 | CURVED SLOGGING RING WRENCH 29 MM | 1 | |
| 58371 | CURVED SLOGGING RING WRENCH 42 MM | 1 | |
| 58383 | CURVED SLOGGING RING WRENCH 1.1/2" | 1 | |
| 58387 | CURVED SLOGGING RING WRENCH 2" | 1 | |
| 58388 | CURVED SLOGGING RING WRENCH 2.1/4" | 1 | |
| 58389 | CURVED SLOGGING RING WRENCH 2.1/2" | 1 | |
| 58390 | CURVED SLOGGING RING WRENCH 2.3/4" | 1 | |
| 58907 | SLIM DOUBLE RING WRENCH 12 - 13 MM 15º BENT AEROSPATIAL CHROME PLATING | 1 | |
| 5937-04020 | SPLIT RING -04X.020’’ LONG | 1 | |
| 5937-04028 | SPLIT RING -04X.028’’ LONG RQST | 1 | |
| 5937-06028 | SPLIT RING -06X.028’’ LONG | 1 | |
| 59628 | RING FOR WELDING FOR 59610, 59611 AND 59612 | 1 | |
| 60383 | DOUBLE OFFSET RING WRENCH 1/2" - 9/16" MIRROR POLISHED CHROME PLATING | 1 | |
| 60385 | DOUBLE OFFSET RING WRENCH 19/32" - 11/16" MIRROR POLISHED CHROME PLATING | 1 | |
| 60388 | DOUBLE OFFSET RING WRENCH 3/4" - 25/32" MIRROR POLISHED CHROME PLATING | 1 | |
| 60773 | DOUBLE ENDED FLAT RING SPANNER 12 - 13 MM | 1 | |
| 60778 | DOUBLE ENDED FLAT RING SPANNER 20 - 22 MM | 1 | |
| 60779 | DOUBLE ENDED FLAT RING SPANNER 21 - 23 MM | 1 | |
| 60780 | DOUBLE ENDED FLAT RING SPANNER 24 - 27 MM | 1 | |
| 60781 | DOUBLE ENDED FLAT RING SPANNER 25 - 28 MM | 1 | |
| 60782 | DOUBLE ENDED FLAT RING SPANNER 30 - 32 MM | 1 | |
| 60783 | SAFETY O-RING FOR IMPACT SOCKETS 1.1/2" (34 -109 MM) | 1 | |
| 60784 | SAFETY O-RING FOR IMPACT SOCKETS 2.1/2" (41 - 70 MM) | 1 | |
| 60881 | SLOGGING RING WRENCH 24 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60882 | SLOGGING RING WRENCH 27 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60883 | SLOGGING RING WRENCH 30 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60884 | SLOGGING RING WRENCH 32 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60885 | SLOGGING RING WRENCH 36 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60886 | SLOGGING RING WRENCH 41 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60887 | SLOGGING RING WRENCH 42 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60888 | SLOGGING RING WRENCH 46 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60889 | SLOGGING RING WRENCH 50 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60890 | SLOGGING RING WRENCH 55 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60891 | SLOGGING RING WRENCH 60 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60904 | SLOGGING RING WRENCH 26 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60939 | SLOGGING RING WRENCH 65 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60940 | SLOGGING RING WRENCH 70 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60941 | SLOGGING RING WRENCH 75 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60942 | SLOGGING RING WRENCH 80 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60943 | SLOGGING RING WRENCH 85 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60944 | SLOGGING RING WRENCH 90 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60945 | SLOGGING RING WRENCH 95 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60946 | SLOGGING RING WRENCH 100 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60947 | SLOGGING RING WRENCH 105 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60948 | SLOGGING RING WRENCH 110 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60949 | SLOGGING RING WRENCH 115 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60950 | SLOGGING RING WRENCH 120 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60983 | SLOGGING RING WRENCH 1" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60984 | SLOGGING RING WRENCH 1.1/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60985 | SLOGGING RING WRENCH 1.3/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60986 | SLOGGING RING WRENCH 1.1/4" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60987 | SLOGGING RING WRENCH 1.5/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60988 | SLOGGING RING WRENCH 1.13/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60989 | SLOGGING RING WRENCH 2" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60990 | SLOGGING RING WRENCH 2.3/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60991 | SLOGGING RING WRENCH 2.9/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60992 | SLOGGING RING WRENCH 2.3/4" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60993 | SLOGGING RING WRENCH 2.15/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60994 | SLOGGING RING WRENCH 3" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60995 | SLOGGING RING WRENCH 3.1/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60996 | SLOGGING RING WRENCH 3.3/4" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60997 | SLOGGING RING WRENCH 4" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60998 | SLOGGING RING WRENCH 4.1/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 60999 | SLOGGING RING WRENCH 4.1/2" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 610A270-C | BELT FORWARD MOORING EQUIPMENT DKS.21XL.C.00 | 1 | |
| 61282 | SAFETY O-RING FOR IMPACT SOCKETS 1.1/2" (110 - 150 MM) | 1 | |
| 61294 | SLOGGING RING WRENCH 1.3/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 61295 | SLOGGING RING WRENCH 1.1/2" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 61296 | SLOGGING RING WRENCH 1.9/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 61678 | DOUBLE OFFSET RING WRENCH 12 - 13 MM MIRROR POLISHED CHROME PLATING | 1 | |
| 61682 | DOUBLE OFFSET RING WRENCH 20 - 22 MM MIRROR POLISHED CHROME PLATING | 1 | |
| 61683 | DOUBLE OFFSET RING WRENCH 21 - 23 MM MIRROR POLISHED CHROME PLATING | 1 | |
| 61684 | DOUBLE OFFSET RING WRENCH 24 - 26 MM MIRROR POLISHED CHROME PLATING | 1 | |
| 61685 | DOUBLE OFFSET RING WRENCH 25 - 28 MM MIRROR POLISHED CHROME PLATING | 1 | |
| 61686 | DOUBLE OFFSET RING WRENCH 27 - 29 MM MIRROR POLISHED CHROME PLATING | 1 | |
| 61687 | DOUBLE OFFSET RING WRENCH 30 - 32 MM MIRROR POLISHED CHROME PLATING | 1 | |
| 61778 | DOUBLE OFFSET RING WRENCH 12 - 13 MM AEROSPATIAL CHROME PLATING | 1 | |
| 61782 | DOUBLE OFFSET RING WRENCH 20 - 22 MM AEROSPATIAL CHROME PLATING | 1 | |
| 61783 | DOUBLE OFFSET RING WRENCH 21 - 23 MM AEROSPATIAL CHROME PLATING | 1 | |
| 61784 | DOUBLE OFFSET RING WRENCH 24 - 26 MM AEROSPATIAL CHROME PLATING | 1 | |
| 61785 | DOUBLE OFFSET RING WRENCH 25 - 28 MM AEROSPATIAL CHROME PLATING | 1 | |
| 61786 | DOUBLE OFFSET RING WRENCH 27 - 29 MM AEROSPATIAL CHROME PLATING | 1 | |
| 61787 | DOUBLE OFFSET RING WRENCH 30 - 32 MM AEROSPATIAL CHROME PLATING | 1 | |
| 61788 | DOUBLE OFFSET RING WRENCH 24 - 27 MM AEROSPATIAL CHROME PLATING | 1 | |
| 6199MT000-162 | TOOLING FOR WIRING KA32 | 1 | |
| 62708 | AUTO GRIP BOX JOINT PLIER SPRING EFFECT 12" | 1 | |
| 627A170-A | 1#&2# MULTI-FUNCTION SPOILER LOCKING RING | 1 | |
| 62836 | BEARING SEPARATOR 2" | 1 | |
| 62840 | PULLER WITH EXTENSION FOR BEARING SEPARATOR 2" | 1 | |
| 62844 | EXTENSIONS FOR BEARING SEPARATOR PULLER 2" | 1 | |
| 62883 | PULLER SET FOR BEARING SEPARATOR 2" -3" | 1 | |
| 63274 | SAFETY O-RING FOR IMPACT SOCKETS 1" (24 - 38 MM) | 1 | |
| 63275 | SAFETY O-RING FOR IMPACT SOCKETS 2.1/2" (70 - 200 MM) | 1 | |
| 63276 | SAFETY O-RING FOR IMPACT SOCKETS 2.1/2" (200 - 225 MM) | 1 | |
| 63917 | TIP FOR SOLDERING 30 W COD. 63252 | 1 | |
| 63920 | TIP FOR SOLDERING 40 W COD. 63270 | 1 | |
| 64001-7970 | Hand Crimp Tool for 2 AWG Insulated Ring Terminals | 1 | |
| 64248 | SPRING 5/8" x 20 M F/ELECT.PIPE CLEANER | 1 | |
| 64950 | OFFSET RING STRUCTURAL WRENCH 22 MM | 1 | |
| 64951 | OFFSET RING STRUCTURAL WRENCH 24 MM | 1 | |
| 64952 | OFFSET RING STRUCTURAL WRENCH 27 MM | 1 | |
| 64954 | OFFSET RING STRUCTURAL WRENCH 32 MM | 1 | |
| 64981 | OFFSET RING STRUCTURAL WRENCH 1.1/2" | 1 | |
| 64989 | OFFSET RING STRUCTURAL WRENCH 2" | 1 | |
| 64990 | OFFSET RING STRUCTURAL WRENCH 2.1/16" | 1 | |
| 64991 | OFFSET RING STRUCTURAL WRENCH 2.1/8" | 1 | |
| 64992 | OFFSET RING STRUCTURAL WRENCH 2.3/16" | 1 | |
| 64993 | OFFSET RING STRUCTURAL WRENCH 2.1/4" | 1 | |
| 64994 | OFFSET RING STRUCTURAL WRENCH 2.5/16" | 1 | |
| 64995 | OFFSET RING STRUCTURAL WRENCH 2.3/8" | 1 | |
| 64996 | OFFSET RING STRUCTURAL WRENCH 2.7/16" | 1 | |
| 64997 | OFFSET RING STRUCTURAL WRENCH 2.1/2" | 1 | |
| 64998 | OFFSET RING STRUCTURAL WRENCH 2.9/16" | 1 | |
| 64999 | OFFSET RING STRUCTURAL WRENCH 2.5/8" | 1 | |
| 65091 | RATCHETING RING WRENCH 12 MM | 1 | |
| 65098 | RATCHETING RING WRENCH 22 MM | 1 | |
| 65099 | RATCHETING RING WRENCH 24 MM | 1 | |
| 65100 | RATCHETING RING WRENCH 27 MM | 1 | |
| 65102 | RATCHETING RING WRENCH 32 MM | 1 | |
| 65165 | MEASURING TAPE ROBUST BIMAT NYLON MATT 5 M X 25 MM | 1 | |
| 65167 | MEASURING TAPE ROBUST MAGNET BIMAT NYLON MATT 5 M X 25 MM | 1 | |
| 65171 | MEASURING TAPE RALLYE BIMAT 2 STOPS URAR MATT 2 M X 16 MM | 1 | |
| 65172 | MEASURING TAPE RALLYE BIMAT 2 STOPS URAR MATT 3 M X 16 MM | 1 | |
| 65173 | MEASURING TAPE RALLYE BIMAT 2 STOPS URAR MATT 5 M X19 MM | 1 | |
| 65174 | MEASURING TAPE RALLYE BIMAT 2 STOPS URAR MATT 8 M X 25 MM | 1 | |
| 65181 | SURFACE RESISTANCE MEASURING PROBE SR2 PROBE DIN 65181 | 1 | |
| 65358 | MEASURING TAPE ROBUST BIMAT NYLON MATT 5 M/16' X 25 MM (mm/inch) | 1 | |
| 65359 | MEASURING TAPE ROBUST BIMAT NYLON MATT 8 M/26' X 30 MM (mm/inch) | 1 | |
| 65360 | MEASURING TAPE ROBUST MAGNET BIMAT NYLON MATT 5 M/16' X 25 MM (mm/inch) | 1 | |
| 65361 | MEASURING TAPE RALLYE BIMAT URAR 2 STOPS 2 M/6' X 16 MM (mm/inch) | 1 | |
| 65362 | MEASURING TAPE RALLYE BIMAT URAR 2 STOPS 3 M/10' X 16 MM (mm/inch | 1 | |
| 65363 | MEASURING TAPE RALLYE BIMAT URAR 2 STOPS 5 M/16' X 19 MM (mm/inch) | 1 | |
| 65364 | MEASURING TAPE RALLYE BIMAT URAR 2 STOPS 8 M/26' X 25 MM (mm/inch) | 1 | |
| 654478-1 | CRANKSHAFT MAIN BEARING 2.2375-2.2485 INCHES (5.6833-5.7112 CM) | 1 | |
| 654483-1 | CRANKSHAFT MAIN BEARING 2.3630-2.3750 (6.0020-6.0325 CM) | 1 | |
| 654485-1 | CRANKSHAFT MAIN BEARING 2.6140-2.6250 INCHES (6.6396-6.6675 CM) | 1 | |
| 65601A4351M000 | CENTERING CONE, RIB12 | 1 | |
| 65637 | SRING DIVIDER 125 MM | 1 | |
| 65639 | SPRING DIVIDER 200 MM | 1 | |
| 65647 | INSIDE SPRING DIVIDER 200 MM | 1 | |
| 65654 | OUTSIDE SPRING DIVIDER 200 MM | 1 | |
| 65662 | SPRING DIVIDER WITH REPLACEABLE NEEDLES 200 MM | 1 | |
| 65708 | MEASURING TAPE PLATINUM Q BIMAT MATT NYLON 8 M X 25 MM | 1 | |
| 65710 | MEASURING TAPE PLATINUM Q MAGNET BIMAT MATT NYLON 8 M X 25 MM | 1 | |
| 65723 | MEASURING TAPE PLATINUM Q BIMAT MATT NYLON 8 M/26" X 25 MM | 1 | |
| 65725 | MEASURING TAPE PLATINUM Q MAGNET BIMAT MATT NYLON 8 M/26" X 25 MM | 1 | |
| 657900 1-17 | 12 POINT BOX (RING) 9X12 INSERT TOOL 17MM | 1 | |
| 657900_1-17 | 12 POINT BOX (RING) 9X12 INSERT TOOL 17MM | 1 | |
| 65888 | OFFSET RING SPANNER FOR EXTENSION 24 MM | 1 | |
| 65889 | OFFSET RING SPANNER FOR EXTENSION 27 MM | 1 | |
| 65891 | OFFSET RING SPANNER FOR EXTENSION 32 MM | 1 | |
| 65909 | EXTENSION FOR RING WRENCH 21 - 30 MM (3/4 - 1.1/8") | 1 | |
| 65910 | EXTENSION FOR RING WRENCH 32 - 41 MM (1.1/4" - 1.5/8") | 1 | |
| 65911 | EXTENSION FOR RING WRENCH 46 - 55 MM (1.3/4" - 2") | 1 | |
| 65912 | EXTENSION FOR RING WRENCH 60 - 105 MM (2.1/4" - 3") | 1 | |
| 65954 | OFFSET RING SPANNER FOR EXTENSION 1.1/2" | 1 | |
| 65982 | OFFSET RING WRENCH FOR EXTENSION 42 MM | 1 | |
| 65984 | OFFSET RING WRENCH FOR EXTENSION 52 MM | 1 | |
| 661-712 | METRIC SEALING RING ¿6.2X17.5X2 | 1 | |
| 66429 | SAFETY O-RING 25 X 5 MM FOR NON SPARKING IMPACT SOCKET WRENCH 1/2" | 1 | |
| 66430 | SAFETY O-RING 37 X 5 MM FOR NON SPARKING IMPACT SOCKET WRENCHES 1/2" | 1 | |
| 66436 | SAFETY O-RING 79 X 10 MM FOR NON SPARKING IMPACT SOCKET WRENCHES 1.1/2" | 1 | |
| 66450 | SAFETY O-RING 120 X 10 MM FOR NON SPARKING IMPACT SOCKET WRENCHES 1.1/2" | 1 | |
| 66562 | OFFSET RING SPANNER FOR EXTENSION 21MM | 1 | |
| 66563 | OFFSET RING SPANNER FOR EXTENSION 22 MM | 1 | |
| 670BA27070K90-7 | STOPPER RING 670BA27070K90-7 | 1 | |
| 670BA27070K90-9 | STOPPER RING 670BA27070K90-9 | 1 | |
| 67274 | SLOGGING RING WRENCH 39 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67308 | SLOGGING RING WRENCH 102 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67309 | SLOGGING RING WRENCH 107 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67310 | SLOGGING RING WRENCH 17 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67311 | SLOGGING RING WRENCH 18 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67312 | SLOGGING RING WRENCH 19 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67313 | SLOGGING RING WRENCH 20 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67314 | SLOGGING RING WRENCH 21 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67315 | SLOGGING RING WRENCH 22 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67316 | SLOGGING RING WRENCH 23 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67317 | SLOGGING RING WRENCH 25 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67318 | SLOGGING RING WRENCH 28 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67319 | SLOGGING RING WRENCH 29 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67320 | SLOGGING RING WRENCH 31 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67321 | SLOGGING RING WRENCH 33 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67322 | SLOGGING RING WRENCH 34 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67323 | SLOGGING RING WRENCH 35 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67324 | SLOGGING RING WRENCH 37 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67325 | SLOGGING RING WRENCH 38 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67326 | SLOGGING RING WRENCH 45 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67327 | SLOGGING RING WRENCH 47 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67328 | SLOGGING RING WRENCH 52 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67329 | SLOGGING RING WRENCH 54 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67330 | SLOGGING RING WRENCH 56 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67331 | SLOGGING RING WRENCH 58 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67332 | SLOGGING RING WRENCH 59 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67333 | SLOGGING RING WRENCH 61 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67334 | SLOGGING RING WRENCH 62 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67335 | SLOGGING RING WRENCH 63 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67336 | SLOGGING RING WRENCH 64 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67337 | SLOGGING RING WRENCH 66 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67338 | SLOGGING RING WRENCH 67 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67339 | SLOGGING RING WRENCH 68 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67340 | SLOGGING RING WRENCH 69 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67341 | SLOGGING RING WRENCH 71 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67342 | SLOGGING RING WRENCH 72 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67343 | SLOGGING RING WRENCH 73 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67344 | SLOGGING RING WRENCH 76 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67345 | SLOGGING RING WRENCH 77 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67346 | SLOGGING RING WRENCH 78 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67347 | SLOGGING RING WRENCH 79 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67348 | SLOGGING RING WRENCH 82 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67349 | SLOGGING RING WRENCH 88 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67350 | SLOGGING RING WRENCH 94 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67351 | SLOGGING RING WRENCH 98 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67352 | SLOGGING RING WRENCH 125 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67353 | SLOGGING RING WRENCH 130 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67354 | SLOGGING RING WRENCH 135 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67355 | SLOGGING RING WRENCH 140 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67356 | SLOGGING RING WRENCH 145 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67357 | SLOGGING RING WRENCH 150 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67358 | SLOGGING RING WRENCH 155 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67359 | SLOGGING RING WRENCH 160 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67360 | SLOGGING RING WRENCH 165 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67361 | SLOGGING RING WRENCH 170 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67362 | SLOGGING RING WRENCH 175 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67363 | SLOGGING RING WRENCH 180 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67364 | SLOGGING RING WRENCH 185 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67365 | SLOGGING RING WRENCH 190 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67366 | SLOGGING RING WRENCH 195 MM DIN-7444 PHOSPHATED (12 EDGES) | 2 | |
| 67367 | SLOGGING RING WRENCH 200 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67368 | SLOGGING RING WRENCH 108 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67369 | SLOGGING RING WRENCH 1/2" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67370 | SLOGGING RING WRENCH 3/4" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67371 | SLOGGING RING WRENCH 7/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67372 | SLOGGING RING WRENCH 15/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67373 | SLOGGING RING WRENCH 1.1/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67374 | SLOGGING RING WRENCH 1.5/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67375 | SLOGGING RING WRENCH 1.7/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67376 | SLOGGING RING WRENCH 1.11/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67377 | SLOGGING RING WRENCH 1.3/4" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67378 | SLOGGING RING WRENCH 1.7/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67379 | SLOGGING RING WRENCH 1.15/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67380 | SLOGGING RING WRENCH 2.1/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67381 | SLOGGING RING WRENCH 2.1/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67382 | SLOGGING RING WRENCH 2.3/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67383 | SLOGGING RING WRENCH 2.1/4" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67384 | SLOGGING RING WRENCH 2.5/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67385 | SLOGGING RING WRENCH 2.7/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67386 | SLOGGING RING WRENCH 2.1/2" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67387 | SLOGGING RING WRENCH 2.5/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67388 | SLOGGING RING WRENCH 2.11/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67389 | SLOGGING RING WRENCH 2.13/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67390 | SLOGGING RING WRENCH 2.7/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67391 | SLOGGING RING WRENCH 3.1/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67392 | SLOGGING RING WRENCH 3.1/4" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67393 | SLOGGING RING WRENCH 3.5/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67394 | SLOGGING RING WRENCH 3.3/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67395 | SLOGGING RING WRENCH 3.1/2" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67396 | SLOGGING RING WRENCH 3.9/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67397 | SLOGGING RING WRENCH 3.5/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67398 | SLOGGING RING WRENCH 3.11/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67399 | SLOGGING RING WRENCH 3.13/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67400 | SLOGGING RING WRENCH 3.7/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67401 | SLOGGING RING WRENCH 3.15/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67402 | SLOGGING RING WRENCH 4.1/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67403 | SLOGGING RING WRENCH 4.3/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67404 | SLOGGING RING WRENCH 4.1/4" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67405 | SLOGGING RING WRENCH 4.5/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67406 | SLOGGING RING WRENCH 4.3/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67407 | SLOGGING RING WRENCH 4.9/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67408 | SLOGGING RING WRENCH 4.5/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67409 | SLOGGING RING WRENCH 4.11/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67410 | SLOGGING RING WRENCH 4.3/4" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67411 | SLOGGING RING WRENCH 4.13/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67412 | SLOGGING RING WRENCH 4.7/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67413 | SLOGGING RING WRENCH 4.15/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67414 | SLOGGING RING WRENCH 5" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67415 | SLOGGING RING WRENCH 5.1/4" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67416 | SLOGGING RING WRENCH 5.5/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67417 | SLOGGING RING WRENCH 5.3/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67418 | SLOGGING RING WRENCH 5.1/2" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67419 | SLOGGING RING WRENCH 5.3/4" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67420 | SLOGGING RING WRENCH 6" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67422 | SLOGGING RING WRENCH 48 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67492 | SLOGGING RING WRENCH 84 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67499 | SLOGGING RING WRENCH 74 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67537 | SLOGGING RING WRENCH 5.5/8" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67845 | DOUBLE OFFSET RING WRENCH 10 - 12 MM AEROSPATIAL CHROME PLATING | 1 | |
| 67849 | DOUBLE OFFSET RING WRENCH 12 - 14 MM AEROSPATIAL CHROME PLATING | 1 | |
| 67856 | DOUBLE OFFSET RING WRENCH 18 - 21 MM AEROSPATIAL CHROME PLATING | 1 | |
| 67857 | DOUBLE OFFSET RING WRENCH 19 - 22 MM AEROSPATIAL CHROME PLATING | 1 | |
| 67858 | DOUBLE OFFSET RING WRENCH 21 - 24 MM AEROSPATIAL CHROME PLATING | 1 | |
| 67859 | DOUBLE OFFSET RING WRENCH 22 - 24 MM AEROSPATIAL CHROME PLATING | 1 | |
| 67860 | DOUBLE OFFSET RING WRENCH 27 - 30 MM AEROSPATIAL CHROME PLATING | 1 | |
| 67861 | DOUBLE OFFSET RING WRENCH 32 - 36 MM AEROSPATIAL CHROME PLATING | 1 | |
| 67886 | DOUBLE OFFSET RING WRENCH 5/16" - 11/32" MIRROR POLISHED CHROME PLATING | 1 | |
| 67887 | DOUBLE OFFSET RING WRENCH 7/16" - 1/2" MIRROR POLISHED CHROME PLATING | 1 | |
| 6796950-8 | RR M250 BEARING PULLER | 1 | |
| 68017 | COMPACT FLARING TOOL 3/16" -1/4" - 5/16" - 3/8" - 1/2" -5/8" | 1 | |
| 68018 | FLARING TOOL 6-8-10-12-14-15 MM | 1 | |
| 68044 | SPRING TUBE BENDER 12 MM | 1 | |
| 68051 | SPRING TUBE BENDER 1/2" | 1 | |
| 68055 | SPRING TUBE BENDER 22 MM | 1 | |
| 68077 | SLOGGING RING WRENCH 11/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 68101NSA5101000 | 5101 RING(32 EACH) | 4 | |
| 68464 | SET OF 8 DOUBLE OFFSET RING WRENCHES 6-7 / 20-22 MM AEROSPATIAL CHROME PLATING | 1 | |
| 68465 | SET OF 10 DOUBLE OFFSET RING WRENCHES 6 - 7 / 24 - 26 MM AEROSPATIAL CHROME PLATING | 1 | |
| 68570 | SLOGGING RING WRENCH 3.7/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 68582 | SET OF 10 OF RATCHETING RING WRENCHES 10-27 MM | 1 | |
| 68589 | SET OF 8 DOUBLE ENDED FLAT RING SPANNERS 8-9 /21-23 MM | 1 | |
| 68607 | SET OF 12 DOUBLE ENDED FLAT RING SPANNERS 6-7 / 30-32 MM | 1 | |
| 68625 | SLOGGING RING WRENCH 1.1/2" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68633 | SLOGGING RING WRENCH 2" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68634 | SLOGGING RING WRENCH 2.1/16" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68635 | SLOGGING RING WRENCH 2.1/8" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68636 | SLOGGING RING WRENCH 2.3/16" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68637 | SLOGGING RING WRENCH 2.1/4" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68638 | SLOGGING RING WRENCH 2.5/16" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68639 | SLOGGING RING WRENCH 2.3/8" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68640 | SLOGGING RING WRENCH 2.7/16" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68641 | SLOGGING RING WRENCH 2.1/2" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68642 | SLOGGING RING WRENCH 2.9/16" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68643 | SLOGGING RING WRENCH 2.5/8" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68644 | SLOGGING RING WRENCH 2.11/16" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68645 | SLOGGING RING WRENCH 2.3/4" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68646 | SLOGGING RING WRENCH 2.13/16" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68647 | SLOGGING RING WRENCH 2.7/8" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68648 | SLOGGING RING WRENCH 2.15/16" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68655 | SLOGGING RING WRENCH 3.1/2" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68670 | SLOGGING RING WRENCH 4.1/2" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68682 | SLOGGING RING WRENCH 5.1/2" DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 6872544-2 | CLAMPING RING 1 SET (INCLUDED WITH 6872544) | 1 | |
| 68929 | SLOGGING RING WRENCH 22 MM DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68930 | SLOGGING RING WRENCH 24 MM DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68931 | SLOGGING RING WRENCH 27 MM DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68933 | SLOGGING RING WRENCH 32 MM DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68948 | SLOGGING RING WRENCH 120 MM DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 69003 | SLOGGING RING WRENCH 13/16" DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 69008-0233 | Main Spring for 0690080225 Changehead | 1 | |
| 69239 | SET OF 8 DOUBLE OFFSET RING WRENCHES 6 - 7 / 20 - 22 MM AEROSPATIAL CHROME PLATING | 1 | |
| 69256 | SET 10 DOUBLE OFFSET RING WRENCHES 6 - 7 / 24 - 26 MM AEROSPATIAL CHROME PLATING | 1 | |
| 69257 | SET 12 DOUBLE OFFSET RING WRENCHES 6 - 7 /30 - 32 MM AEROSPATIAL CHROME PLATING | 1 | |
| 69323 | SET OF 12 DOUBLE OFFSET RING WRENCHES 1/4" - 5/16"- 1.1/16"- 1.1/4" MIRROR POLISHED CHROME PLATING | 1 | |
| 6F | Spring Flex Magnetic Retriever (Overall length: 17-1/2" (44.5 cm)) (Add to cart: Add To Cart) | 1 | |
| 6GP | PLUG, FUSIBLE PLUG PORT, WITHO-RING(D18302 VALVE/REGULATORS | 1 | |
| 700-2-5 | Ladder, Rolling Platform, 2.5 Ft, Spring Loaded Casters | 1 | |
| 701-2978000 | A320 USED FOR THE FWD/AFT PASSENGER CREW DOORS LH & RH TO SECURE THE PASSENGER DOOR DAMPER AND EMERGENCY OPERATION CYLINDER DURING ANY MAINTENANCE OPERATION | 32 | |
| 70222 | DOUBLE OFFSET RING WRENCH 12 - 13 MM NON SPARKING Cu-Be | 1 | |
| 70223 | DOUBLE OFFSET RING WRENCH 12 - 14 MM NON SPARKING Cu-Be | 1 | |
| 70230 | DOUBLE OFFSET RING WRENCH 17 - 22 MM NON SPARKING Cu-Be | 1 | |
| 70232 | DOUBLE OFFSET RING WRENCH 19 - 22 MM NON SPARKING Cu-Be | 1 | |
| 70233 | DOUBLE OFFSET RING WRENCH 19 - 24 MM NON SPARKING Cu-Be | 1 | |
| 70234 | DOUBLE OFFSET RING WRENCH 20 - 22 MM NON SPARKING Cu-Be | 1 | |
| 70235 | DOUBLE OFFSET RING WRENCH 21 - 23 MM NON SPARKING Cu-Be | 1 | |
| 70236 | DOUBLE OFFSET RING WRENCH 22 - 24 MM NON SPARKING Cu-Be | 1 | |
| 70237 | DOUBLE OFFSET RING WRENCH 22 - 27 MM NON SPARKING Cu-Be | 1 | |
| 70238 | DOUBLE OFFSET RING WRENCH 24 - 30 MM NON SPARKING Cu-Be | 1 | |
| 70239 | DOUBLE OFFSET RING WRENCH 25 - 28 MM NON SPARKING Cu-Be | 1 | |
| 70240 | DOUBLE OFFSET RING WRENCH 27 - 29 MM NON SPARKING Cu-Be | 1 | |
| 70241 | DOUBLE OFFSET RING WRENCH 27 - 30 MM NON SPARKING Cu-Be | 1 | |
| 70242 | DOUBLE OFFSET RING WRENCH 27 - 32 MM NON SPARKING Cu-Be | 1 | |
| 70243 | DOUBLE OFFSET RING WRENCH 30 - 32 MM NON SPARKING Cu-Be | 1 | |
| 70248 | OFFSET RING STRUCTURAL WRENCH 22 MM NON SPARKING Cu-Be | 1 | |
| 70249 | OFFSET RING STRUCTURAL WRENCH 24 MM NON SPARKING Cu-Be | 1 | |
| 70250 | OFFSET RING STRUCTURAL WRENCH 27 MM NON SPARKING Cu-Be | 1 | |
| 70252 | OFFSET RING STRUCTURAL WRENCH 32 MM NON SPARKING Cu-Be | 1 | |
| 70299 | SLOGGING RING WRENCH 22 MM NON SPARKING Cu-Be | 1 | |
| 702P08A | RING PROBE, ID 8 MM (0.315 IN), SHIELDED FREQ. 250 HZ ‐ 40KHZ | 1 | |
| 702P10B/TF | RING (DONUT) PROBE, ABSOLUTE - REFLECTION, 250 HZ TO 40 KHZ FREQUENCY, ID .394 IN. (10.0 MM), OD .866 IN. (22.0 MM), HEIGHT .984 IN. (25.0 MM) (HOCKING NDT LIMITED OR EQUIVALENT) | 1 | |
| 702P1DA | RING PROBE 250 HZ-40KHZ | 1 | |
| 70300 | SLOGGING RING WRENCH 24 MM NON SPARKING Cu-Be | 1 | |
| 70301 | SLOGGING RING WRENCH 27 MM NON SPARKING Cu-Be | 1 | |
| 70303 | SLOGGING RING WRENCH 32 MM NON SPARKING Cu-Be | 1 | |
| 70308 | SLOGGING RING WRENCH 52 MM NON SPARKING Cu-Be | 1 | |
| 703A91-0000-00 | COD, SECURING L200MM | 1 | |
| 703A91-0211-00 | NO. 16 STRAP 2 (RING) | 1 | |
| 703A93020520 | M12 SHELL CENTERING | 1 | |
| 70786 | DOUBLE OFFSET RING WRENCH 12 - 13 MM NON SPARKING Al-Bron | 1 | |
| 70787 | DOUBLE OFFSET RING WRENCH 12 - 14 MM NON SPARKING Al-Bron | 1 | |
| 70794 | DOUBLE OFFSET RING WRENCH 17 - 22 MM NON SPARKING Al-Bron | 1 | |
| 70796 | DOUBLE OFFSET RING WRENCH 19 - 22 MM NON SPARKING Al-Bron | 1 | |
| 70797 | DOUBLE OFFSET RING WRENCH 19 - 24 MM NON SPARKING Al-Bron | 1 | |
| 70798 | DOUBLE OFFSET RING WRENCH 20 - 22 MM NON SPARKING Al-Bron | 1 | |
| 70799 | DOUBLE OFFSET RING WRENCH 21 - 23 MM NON SPARKING Al-Bron | 1 | |
| 70800 | DOUBLE OFFSET RING WRENCH 22 - 24 MM NON SPARKING Al-Bron | 1 | |
| 70801 | DOUBLE OFFSET RING WRENCH 22 - 27 MM NON SPARKING Al-Bron | 1 | |
| 70802 | DOUBLE OFFSET RING WRENCH 24 - 30 MM NON SPARKING Al-Bron | 1 | |
| 70803 | DOUBLE OFFSET RING WRENCH 25 - 28 MM NON SPARKING Al-Bron | 1 | |
| 70804 | DOUBLE OFFSET RING WRENCH 27 - 29 MM NON SPARKING Al-Bron | 1 | |
| 70805 | DOUBLE OFFSET RING WRENCH 27 - 30 MM NON SPARKING Al-Bron | 1 | |
| 70806 | DOUBLE OFFSET RING WRENCH 27 - 32 MM NON SPARKING Al-Bron | 1 | |
| 70807 | DOUBLE OFFSET RING WRENCH 30 - 32 MM NON SPARKING Al-Bron | 1 | |
| 70812 | DOUBLE OFFSET RING WRENCH 7/32" - 1/4" NON SPARKING Cu-Be | 1 | |
| 70815 | DOUBLE OFFSET RING WRENCH 7/16" -1/2" NON SPARKING Cu-Be | 1 | |
| 70816 | DOUBLE OFFSET RING WRENCH 1/2" - 9/16" NON SPARKING Cu-Be | 1 | |
| 70819 | DOUBLE OFFSET RING WRENCH 11/16" - 25/32" NON SPARKING Cu-Be | 1 | |
| 70823 | DOUBLE OFFSET RING WRENCH 7/8" - 31/32" NON SPARKING Cu-Be | 1 | |
| 70837 | DOUBLE OFFSET RING WRENCH 1.13/16" - 2" NON SPARKING Cu-Be | 1 | |
| 70838 | DOUBLE OFFSET RING WRENCH 2.1/16" - 2.3/16" NON SPARKING Cu-Be | 1 | |
| 70839 | DOUBLE OFFSET RING WRENCH 2" - 2.3/8" NON SPARKING Cu-Be | 1 | |
| 70840 | DOUBLE OFFSET RING WRENCH 2.1/4" - 2.3/8" NON SPARKING Cu-Be | 1 | |
| 70841 | DOUBLE OFFSET RING WRENCH 7/32" - 1/4" NON SPARKING Al-Bron | 1 | |
| 70844 | DOUBLE OFFSET RING WRENCH 7/16" - 1/2" NON SPARKING Al-Bron | 1 | |
| 70845 | DOUBLE OFFSET RING WRENCH 1/2" - 9/16" NON SPARKING Al-Bron | 1 | |
| 70848 | DOUBLE OFFSET RING WRENCH 11/16" - 25/32" NON SPARKING Al-Bron | 1 | |
| 70852 | DOUBLE OFFSET RING WRENCH 7/8" - 31/32" NON SPARKING Al-Bron | 1 | |
| 70866 | DOUBLE OFFSET RING WRENCH 1.13/16" - 2" NON SPARKING Al-Bron | 1 | |
| 70867 | DOUBLE OFFSET RING WRENCH 2.1/16" - 2.3/16" NON SPARKING Al-Bron | 1 | |
| 70868 | DOUBLE OFFSET RING WRENCH 2" - 2.3/8" NON SPARKING Al-Bron | 1 | |
| 70869 | DOUBLE OFFSET RING WRENCH 2.1/4" - 2.3/8" NON SPARKING Al-Bron | 1 | |
| 70958 | RING SPANNER FOR EXTENSION 32 MM NON SPARKING Cu-Be | 1 | |
| 70965 | RING SPANNER FOR EXTENSION 42 MM NON SPARKING Cu-Be | 1 | |
| 70969 | RING SPANNER FOR EXTENSION 52 MM NON SPARKING Cu-Be | 1 | |
| 70983 | RING SPANNER FOR EXTENSION 32 MM NON SPARKING Al-Bron | 1 | |
| 70990 | RING SPANNER FOR EXTENSION 42 MM NON SPARKING Al-Bron | 1 | |
| 70994 | RING SPANNER FOR EXTENSION 52 MM NON SPARKING Al-Bron | 1 | |
| 71077 | SLOGGING RING WRENCH 120 MM NON SPARKING Cu-Be | 1 | |
| 71078 | SLOGGING RING WRENCH 125 MM NON SPARKING Cu-Be | 1 | |
| 71082 | SLOGGING RING WRENCH 22 MM NON SPARKING Al-Bron | 1 | |
| 71083 | SLOGGING RING WRENCH 24 MM NON SPARKING Al-Bron | 1 | |
| 71084 | SLOGGING RING WRENCH 27 MM NON SPARKING Al-Bron | 1 | |
| 71086 | SLOGGING RING WRENCH 32 MM NON SPARKING Al-Bron | 1 | |
| 71091 | SLOGGING RING WRENCH 52 MM NON SPARKING Al-Bron | 1 | |
| 71105 | SLOGGING RING WRENCH 120 MM NON SPARKING Al-Bron | 1 | |
| 71106 | SLOGGING RING WRENCH 125 MM NON SPARKING Al-Bron | 1 | |
| 71115 | SLOGGING RING WRENCH 1.13/32" NON SPARKING Cu-Be | 1 | |
| 71118 | SLOGGING RING WRENCH 2" NON SPARKING Cu-Be | 1 | |
| 71119 | SLOGGING RING WRENCH 2.1/4" NON SPARKING Cu-Be | 1 | |
| 71120 | SLOGGING RING WRENCH 2.5/16" NON SPARKING Cu-Be | 1 | |
| 71121 | SLOGGING RING WRENCH 2.3/8" NON SPARKING Cu-Be | 1 | |
| 71122 | SLOGGING RING WRENCH 2.1/2" NON SPARKING Cu-Be | 1 | |
| 71123 | SLOGGING RING WRENCH 2.9/16" NON SPARKING Cu-Be | 1 | |
| 71124 | SLOGGING RING WRENCH 2.5/8" NON SPARKING Cu-Be | 1 | |
| 71125 | SLOGGING RING WRENCH 2.3/4" NON SPARKING Cu-Be | 1 | |
| 71126 | SLOGGING RING WRENCH 2.15/16" NON SPARKING Cu-Be | 1 | |
| 7113K98 | RING TERMINALS INSULATED 22-18 AWG STUD SIZE #10 | 1 | |
| 71140 | SLOGGING RING WRENCH 1.13/32" NON SPARKING Al-Bron | 1 | |
| 71142 | SLOGGING RING WRENCH 1.13/16" NON SPARKING Al-Bron (12 EDGES) | 1 | |
| 71143 | SLOGGING RING WRENCH 2" NON SPARKING Al-Bron | 1 | |
| 71144 | SLOGGING RING WRENCH 2.1/4" NON SPARKING Al-Bron | 1 | |
| 71145 | SLOGGING RING WRENCH 2.5/16" NON SPARKING Al-Bron | 1 | |
| 71146 | SLOGGING RING WRENCH 2.3/8" NON SPARKING Al-Bron | 1 | |
| 71147 | SLOGGING RING WRENCH 2.1/2" NON SPARKING Al-Bron | 1 | |
| 71148 | SLOGGING RING WRENCH 2.9/16" NON SPARKING Al-Bron | 1 | |
| 71149 | SLOGGING RING WRENCH 2 .5/8" NON SPARKING Al-Bron | 1 | |
| 71150 | SLOGGING RING WRENCH 2.3/4" NON SPARKING Al-Bron | 1 | |
| 71151 | SLOGGING RING WRENCH 2.15/16" NON SPARKING Al-Bron | 1 | |
| 714-042 | REDUCER, 1" X 1/2 SAE W/O-RING | 3 | |
| 71684 | DOUBLE OFFSET RING WRENCH 10 - 12 MM TITANIUM | 1 | |
| 71685 | DOUBLE OFFSET RING WRENCH 12 - 14 MM TITANIUM | 1 | |
| 71688 | DOUBLE OFFSET RING WRENCH 19 - 22 MM TITANIUM | 1 | |
| 71689 | DOUBLE OFFSET RING WRENCH 22 - 24 MM TITANIUM | 1 | |
| 71732 | OFFSET RING STRUCTURAL WRENCH 22 MM NON SPARKING Al-Bron | 1 | |
| 71733 | OFFSET RING STRUCTURAL WRENCH 24 MM NON SPARKING Al-Bron | 1 | |
| 71734 | OFFSET RING STRUCTURAL WRENCH 27 MM NON SPARKING Al-Bron | 1 | |
| 71736 | OFFSET RING STRUCTURAL WRENCH 32 MM NON SPARKING Al-Bron | 1 | |
| 71798 | SLOGGING RING WRENCH 2.1/16" NON SPARKING Al-Bron | 1 | |
| 71799 | SLOGGING RING WRENCH 2.1/8" NON SPARKING Al-Bron | 1 | |
| 717RS10-C | 717-200 REFERENCE STANDARD FOR THE LOWER CENTER WING SKIN PANELS AT STRINGER 16 &18. PAGES 1-11. MATERIAL: 2024-T3, 7075-T6 &7075-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 71800 | SLOGGING RING WRENCH 2.3/16" NON SPARKING Al-Bron | 1 | |
| 71801 | SLOGGING RING WRENCH 2.7/16" NON SPARKING Al-Bron | 1 | |
| 71906 | SLOGGING RING WRENCH 26 MM NON SPARKING Cu-Be | 1 | |
| 71995 | DOUBLE OFFSET RING WRENCH 12 - 13 MM TITANIUM | 1 | |
| 72-0254 | WRENCH - NIPPLE LINE, NO. 5 BEARING 0 (72-0254 AND PRE CFMI SB 72-0676)) | 1 | |
| 72000 | DOUBLE OFFSET RING WRENCH 18 - 20 MM TITANIUM | 1 | |
| 72001 | DOUBLE OFFSET RING WRENCH 20 - 22 MM TITANIUM | 1 | |
| 72002 | DOUBLE OFFSET RING WRENCH 21 - 23 MM TITANIUM | 1 | |
| 72003 | DOUBLE OFFSET RING WRENCH 24 - 27 MM TITANIUM | 1 | |
| 72004 | DOUBLE OFFSET RING WRENCH 25 - 28 MM TITANIUM | 1 | |
| 72005 | DOUBLE OFFSET RING WRENCH 26 - 29 MM TITANIUM | 1 | |
| 72006 | DOUBLE OFFSET RING WRENCH 27 - 30 MM TITANIUM | 1 | |
| 72007 | DOUBLE OFFSET RING WRENCH 30 - 32 MM TITANIUM | 1 | |
| 72008 | DOUBLE OFFSET RING WRENCH 28 - 36 MM TITANIUM | 1 | |
| 72009 | DOUBLE OFFSET RING WRENCH 32 - 36 MM TITANIUM | 1 | |
| 72124 | SLOGGING RING WRENCH 1.1/2" NON SPARKING Cu-Be | 1 | |
| 72130 | SLOGGING RING WRENCH 1.1/2" NON SPARKING Al-Bron | 4 | |
| 72135 | DOUBLE OFFSET RING WRENCH 32 - 36 MM NON SPARKING Cu-Be | 1 | |
| 72139 | DOUBLE OFFSET RING WRENCH 32 - 36 MM NON SPARKING Al-Bron | 1 | |
| 72230 | SLOGGING RING WRENCH 20 MM NON SPARKING Al-Bron | 1 | |
| 72231 | SLOGGING RING WRENCH 20 MM NON SPARKING Cu-Be | 1 | |
| 72631 | SLOGGING RING WRENCH 25 MM NON SPARKING Cu-Be | 1 | |
| 72633 | SLOGGING RING WRENCH 28 MM NON SPARKING Cu-Be | 1 | |
| 72634 | SLOGGING RING WRENCH 29 MM NON SPARKING Cu-Be | 1 | |
| 72651 | SLOGGING RING WRENCH 62 MM NON SPARKING Cu-Be | 1 | |
| 72658 | SLOGGING RING WRENCH 72 MM NON SPARKING Cu-Be | 1 | |
| 72666 | SLOGGING RING WRENCH 82 MM NON SPARKING Cu-Be | 1 | |
| 72675 | SLOGGING RING WRENCH 92 MM NON SPARKING Cu-Be | 1 | |
| 72677 | SLOGGING RING WRENCH 25 MM NON SPARKING Al-Bron | 1 | |
| 72679 | SLOGGING RING WRENCH 28 MM NON SPARKING Al-Bron | 1 | |
| 72680 | SLOGGING RING WRENCH 29 MM NON SPARKING Al-Bron | 1 | |
| 72697 | SLOGGING RING WRENCH 62 MM NON SPARKING Al-Bron | 1 | |
| 72704 | SLOGGING RING WRENCH 72 MM NON SPARKING Al-Bron | 1 | |
| 72712 | SLOGGING RING WRENCH 82 MM NON SPARKING Al-Bron | 1 | |
| 72718 | SLOGGING RING WRENCH 3.1/2" NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 72721 | SLOGGING RING WRENCH 92 MM NON SPARKING Al-Bron | 1 | |
| 72822 | DOUBLE OFFSET RING WRENCH 24 - 26 MM NON SPARKING Cu-Be | 1 | |
| 72823 | DOUBLE OFFSET RING WRENCH 24 - 26 MM NON SPARKING Al-Bron | 1 | |
| 72894 | SLOGGING RING WRENCH 32 MM ACETILEX | 1 | |
| 72913 | DOUBLE OFFSET RING WRENCH 32 - 35 MM NON SPARKING Al-Bron | 1 | |
| 72951 | SLOGGING RING WRENCH 26 MM NON SPARKING Al-Bron | 1 | |
| 72954 | SLOGGING RING WRENCH 2.3/16" NON SPARKING Cu-Be | 1 | |
| 72957 | DOUBLE OFFSET RING WRENCH 32 - 35 MM NON SPARKING Cu-Be | 1 | |
| 73096 | OFFSET RING WRENCH 12 MM 1000 V | 1 | |
| 73105 | OFFSET RING WRENCH 21 MM 1000 V | 1 | |
| 73106 | OFFSET RING WRENCH 22 MM 1000 V | 1 | |
| 73107 | OFFSET RING WRENCH 23 MM 1000 V | 1 | |
| 73108 | OFFSET RING WRENCH 24 MM 1000 V | 1 | |
| 73109 | OFFSET RING WRENCH 26 MM 1000 V | 1 | |
| 73110 | OFFSET RING WRENCH 27 MM 1000 V | 1 | |
| 73111 | OFFSET RING WRENCH 28 MM 1000 V | 1 | |
| 73112 | OFFSET RING WRENCH 29 MM 1000 V | 1 | |
| 73114 | OFFSET RING WRENCH 32 MM 1000 V | 1 | |
| 73118 | OFFSET RING WRENCH 42 MM 1000 V | 1 | |
| 73124 | ANGLE RING WRENCH 12 MM 1000 V | 1 | |
| 73133 | ANGLE RING WRENCH 21 MM 1000 V | 1 | |
| 73134 | ANGLE RING WRENCH 22 MM 1000 V | 1 | |
| 73135 | ANGLE RING WRENCH 23 MM 1000 V | 1 | |
| 73136 | ANGLE RING WRENCH 24 MM 1000 V | 1 | |
| 73191 | ANGLE RING WRENCH 1/2" 1000 V | 1 | |
| 73328 | SLOGGING RING WRENCH 42 MM NON SPARKING Cu-Be | 1 | |
| 73333 | SLOGGING RING WRENCH 42 MM NON SPARKING Al-Bron | 1 | |
| 73338 | DOUBLE OFFSET RING WRENCH 24 - 27 MM NON SPARKING Al-Bron | 1 | |
| 73339 | DOUBLE OFFSET RING WRENCH 24 - 27 MM NON SPARKING Cu-Be | 1 | |
| 73351 | OFFSET RING WRENCH 1/2" 1000 V | 1 | |
| 73391 | DOUBLE OFFSET RING WRENCH 50 - 52 MM NON SPARKING Al-Bron | 1 | |
| 73392 | DOUBLE OFFSET RING WRENCH 50 - 52 MM NON SPARKING Cu-Be | 1 | |
| 73396 | RING SPANNER FOR EXTENSION 27 MM NON SPARKING Al-Bron | 1 | |
| 73472 | RING SPANNER FOR EXTENSION 27 MM NON SPARKING Cu-Be | 1 | |
| 73615 | OFFSET SLOGGING RING WRENCH 120 MM NON SPARKING Cu-Be | 1 | |
| 73616 | OFFSET SLOGGING RING WRENCH 120 MM NON SPARKING Al-Bron | 1 | |
| 73659 | OFFSET SLOGGING RING WRENCH 1.1/2" NON SPARKING Cu-Be | 1 | |
| 73660 | OFFSET SLOGGING RING WRENCH 1.1/2" NON SPARKING Al-Bron | 1 | |
| 73667 | OFFSET SLOGGING RING WRENCH 2" NON SPARKING Cu-Be | 1 | |
| 73668 | OFFSET SLOGGING RING WRENCH 2" NON SPARKING Al-Bron | 1 | |
| 73669 | OFFSET SLOGGING RING WRENCH 2.1/4" NON SPARKING Cu-Be | 1 | |
| 73670 | OFFSET SLOGGING RING WRENCH 2.1/4" NON SPARKING Al-Bron | 1 | |
| 73671 | OFFSET SLOGGING RING WRENCH 2.3/8" NON SPARKING Cu-Be | 1 | |
| 73672 | OFFSET SLOGGING RING WRENCH 2.3/8" NON SPARKING Al-Bron | 1 | |
| 73673 | OFFSET SLOGGING RING WRENCH 2.1/2" NON SPARKING Cu-Be | 1 | |
| 73674 | OFFSET SLOGGING RING WRENCH 2.1/2" NON SPARKING Al-Bron | 1 | |
| 73675 | OFFSET SLOGGING RING WRENCH 2.5/8" NON SPARKING Cu-Be | 1 | |
| 73676 | OFFSET SLOGGING RING WRENCH 2.5/8" NON SPARKING Al-Bron | 1 | |
| 73677 | OFFSET SLOGGING RING WRENCH 2.3/4" NON SPARKING Cu-Be | 1 | |
| 73678 | OFFSET SLOGGING RING WRENCH 2.3/4" NON SPARKING Al-Bron | 1 | |
| 73679 | OFFSET SLOGGING RING WRENCH 2.7/8" NON SPARKING Cu-Be | 1 | |
| 73680 | OFFSET SLOGGING RING WRENCH 2.7/8" NON SPARKING Al-Bron | 1 | |
| 73688 | RING SPANNER FOR EXTENSION 24 MM NON SPARKING Cu-Be | 1 | |
| 73689 | RING SPANNER FOR EXTENSION 24 MM NON SPARKING Al-Bron | 1 | |
| 73964 | DOUBLE ENDED FLAT RING SPANNER 12 - 14 MM NON SPARKING Cu-Be | 1 | |
| 73965 | DOUBLE ENDED FLAT RING SPANNER 12 - 14 MM NON SPARKING Al-Bron | 1 | |
| 73972 | DOUBLE ENDED FLAT RING SPANNER 17 - 22 MM NON SPARKING Cu-Be | 1 | |
| 73973 | DOUBLE ENDED FLAT RING SPANNER 17 - 22 MM NON SPARKING Al-Bron | 1 | |
| 73974 | DOUBLE ENDED FLAT RING SPANNER 19 - 21 MM NON SPARKING Cu-Be | 1 | |
| 73975 | DOUBLE ENDED FLAT RING SPANNER 19 - 21 MM NON SPARKING Al-Bron | 1 | |
| 73976 | DOUBLE ENDED FLAT RING SPANNER 20 - 22 MM NON SPARKING Cu-Be | 1 | |
| 73977 | DOUBLE ENDED FLAT RING SPANNER 20 - 22 MM NON SPARKING Al-Bron | 1 | |
| 73978 | DOUBLE ENDED FLAT RING SPANNER 21 - 23 MM NON SPARKING Cu-Be | 1 | |
| 73979 | DOUBLE ENDED FLAT RING SPANNER 21 - 23 MM NON SPARKING Al-Bron | 1 | |
| 73980 | DOUBLE ENDED FLAT RING SPANNER 22 - 24 MM NON SPARKING Cu-Be | 1 | |
| 73981 | DOUBLE ENDED FLAT RING SPANNER 22 - 24 MM NON SPARKING Al-Bron | 1 | |
| 73982 | DOUBLE ENDED FLAT RING SPANNER 24 - 27 MM NON SPARKING Cu-Be | 1 | |
| 73983 | DOUBLE ENDED FLAT RING SPANNER 24 - 27 MM NON SPARKING Al-Bron | 1 | |
| 73984 | DOUBLE ENDED FLAT RING SPANNER 25 - 28 MM NON SPARKING Cu-Be | 1 | |
| 73985 | DOUBLE ENDED FLAT RING SPANNER 25 - 28 MM NON SPARKING Al-Bron | 1 | |
| 73986 | DOUBLE ENDED FLAT RING SPANNER 27 - 30 MM NON SPARKING Cu-Be | 1 | |
| 73987 | DOUBLE ENDED FLAT RING SPANNER 27 - 30 MM NON SPARKING Al-Bron | 1 | |
| 73988 | DOUBLE ENDED FLAT RING SPANNER 27 - 32 MM NON SPARKING Cu-Be | 1 | |
| 73989 | DOUBLE ENDED FLAT RING SPANNER 27 - 32 MM NON SPARKING Al-Bron | 1 | |
| 73990 | DOUBLE ENDED FLAT RING SPANNER 30 - 32 MM NON SPARKING Cu-Be | 1 | |
| 73991 | DOUBLE ENDED FLAT RING SPANNER 30 - 32 MM NON SPARKING Al-Bron | 1 | |
| 73997 | SINGLE END RING WRENCH 12 MM NON SPARKING Cu-Be | 1 | |
| 73998 | SINGLE END RING WRENCH 12 MM NON SPARKING Al-Bron | 1 | |
| 74009 | SINGLE END RING WRENCH 20 MM NON SPARKING Cu-Be | 1 | |
| 74010 | SINGLE END RING WRENCH 20 MM NON SPARKING Al-Bron | 1 | |
| 74011 | SINGLE END RING WRENCH 21 MM NON SPARKING Cu-Be | 1 | |
| 74012 | SINGLE END RING WRENCH 21 MM NON SPARKING Al-Bron | 1 | |
| 74013 | SINGLE END RING WRENCH 22 MM NON SPARKING Cu-Be | 1 | |
| 74014 | SINGLE END RING WRENCH 22 MM NON SPARKING Al-Bron | 1 | |
| 74015 | SINGLE END RING WRENCH 24 MM NON SPARKING Cu-Be | 1 | |
| 74016 | SINGLE END RING WRENCH 24 MM NON SPARKING Al-Bron | 1 | |
| 74017 | SINGLE END RING WRENCH 27 MM NON SPARKING Cu-Be | 1 | |
| 74018 | SINGLE END RING WRENCH 27 MM NON SPARKING Al-Bron | 1 | |
| 74021 | SINGLE END RING WRENCH 32 MM NON SPARKING Cu-Be | 1 | |
| 74022 | SINGLE END RING WRENCH 32 MM NON SPARKING Al-Bron | 1 | |
| 74058 | CURVED SINGLE END RING WRENCH 12 MM NON SPARKING Cu-Be | 1 | |
| 74059 | CURVED SINGLE END RING WRENCH 12 MM NON SPARKING Al-Bron | 1 | |
| 74068 | CURVED SINGLE END RING WRENCH 22 MM NON SPARKING Cu-Be | 1 | |
| 74069 | CURVED SINGLE END RING WRENCH 22 MM NON SPARKING Al-Bron | 1 | |
| 74070 | CURVED SINGLE END RING WRENCH 24 MM NON SPARKING Cu-Be | 1 | |
| 74071 | CURVED SINGLE END RING WRENCH 24 MM NON SPARKING Al-Bron | 1 | |
| 74072 | CURVED SINGLE END RING WRENCH 27 MM NON SPARKING Cu-Be | 1 | |
| 74073 | CURVED SINGLE END RING WRENCH 27 MM NON SPARKING Al-Bron | 1 | |
| 74076 | CURVED SINGLE END RING WRENCH 32 MM NON SPARKING Cu-Be | 1 | |
| 74077 | CURVED SINGLE END RING WRENCH 32 MM NON SPARKING Al-Bron | 1 | |
| 74105 | O RING 1.25X.875IN | 1 | |
| 74107 | OFFSET SINGLE END RING WRENCH 21 MM NON SPARKING Cu-Be | 1 | |
| 74108 | OFFSET SINGLE END RING WRENCH 21 MM NON SPARKING Al-Bron | 1 | |
| 74109 | OFFSET SINGLE END RING WRENCH 22 MM NON SPARKING Cu-Be | 1 | |
| 74110 | OFFSET SINGLE END RING WRENCH 22 MM NON SPARKING Al-Bron | 1 | |
| 74111 | OFFSET SINGLE END RING WRENCH 24 MM NON SPARKING Cu-Be | 1 | |
| 74112 | OFFSET SINGLE END RING WRENCH 24 MM NON SPARKING Al-Bron | 1 | |
| 74113 | OFFSET SINGLE END RING WRENCH 27 MM NON SPARKING Cu-Be | 1 | |
| 74114 | OFFSET SINGLE END RING WRENCH 27 MM NON SPARKING Al-Bron | 1 | |
| 74117 | OFFSET SINGLE END RING WRENCH 32 MM NON SPARKING Cu-Be | 1 | |
| 74118 | OFFSET SINGLE END RING WRENCH 32 MM NON SPARKING Al-Bron | 1 | |
| 74122 | OFFSET SLOGGING RING WRENCH 27 MM NON SPARKING Cu-Be | 1 | |
| 74123 | OFFSET SLOGGING RING WRENCH 27 MM NON SPARKING Al-Bron | 1 | |
| 74126 | OFFSET SLOGGING RING WRENCH 32 MM NON SPARKING Cu-Be | 1 | |
| 74127 | OFFSET SLOGGING RING WRENCH 32 MM NON SPARKING Al-Bron | 1 | |
| 74137 | CURVED SLOGGING RING WRENCH 24 MM NON SPARKING Cu-Be | 1 | |
| 74138 | CURVED SLOGGING RING WRENCH 24 MM NON SPARKING Al-Bron | 1 | |
| 74139 | CURVED SLOGGING RING WRENCH 27 MM NON SPARKING Cu-Be | 1 | |
| 74140 | CURVED SLOGGING RING WRENCH 27 MM NON SPARKING Al-Bron | 1 | |
| 74143 | CURVED SLOGGING RING WRENCH 32 MM NON SPARKING Cu-Be | 1 | |
| 74144 | CURVED SLOGGING RING WRENCH 32 MM NON SPARKING Al-Bron | 1 | |
| 74610 | OFFSET RING STRUCTURAL WRENCH 1.1/2" NON SPARKING Cu-Be | 1 | |
| 74611 | OFFSET RING STRUCTURAL WRENCH 1.1/2" NON SPARKING Al-Bron | 1 | |
| 74618 | OFFSET RING STRUCTURAL WRENCH 2" NON SPARKING Cu-Be | 1 | |
| 74619 | OFFSET RING STRUCTURAL WRENCH 2" NON SPARKING Al-Bron | 1 | |
| 74642 | SINGLE END RING WRENCH 1.1/2" NON SPARKING Cu-Be | 1 | |
| 74646 | SINGLE END RING WRENCH 2" NON SPARKING Cu-Be | 1 | |
| 74647 | SINGLE END RING WRENCH 2.1/16" NON SPARKING Cu-Be | 1 | |
| 74648 | SINGLE END RING WRENCH 2.1/16" NON SPARKING Al-Bron | 1 | |
| 74763 | SLOGGING RING WRENCH 1/2" NON SPARKING Cu-Be | 1 | |
| 74764 | SLOGGING RING WRENCH 1/2" NON SPARKING Al-Bron | 1 | |
| 74771 | DOUBLE ENDED FLAT RING SPANNER 32 - 36 MM NON SPARKING Cu-Be | 1 | |
| 74772 | DOUBLE ENDED FLAT RING SPANNER 32 - 36 MM NON SPARKING Al-Bron | 1 | |
| 74833 | DOUBLE OFFSET RING WRENCH 26 - 29 MM NON SPARKING Cu-Be | 1 | |
| 74834 | DOUBLE OFFSET RING WRENCH 26 - 29 MM NON SPARKING Al-Bron | 1 | |
| 75318 | DOUBLE OFFSET RING WRENCH 11 - 12 MM NON SPARKING Cu-Be | 1 | |
| 75319 | DOUBLE OFFSET RING WRENCH 11 - 12 MM NON SPARKING Al-Bron | 1 | |
| 75324 | DOUBLE OFFSET RING WRENCH 10 - 12 MM NON SPARKING Cu-Be | 1 | |
| 75325 | DOUBLE OFFSET RING WRENCH 10 - 12 MM NON SPARKING Al-Bron | 1 | |
| 75330 | DOUBLE OFFSET RING WRENCH 17 - 21 MM NON SPARKING Cu-Be | 1 | |
| 75331 | DOUBLE OFFSET RING WRENCH 17 - 21 MM NON SPARKING Al-Bron | 1 | |
| 75332 | DOUBLE OFFSET RING WRENCH 19 - 21 MM NON SPARKING Cu-Be | 1 | |
| 75333 | DOUBLE OFFSET RING WRENCH 19 - 21MM NON SPARKING Al-Bron | 1 | |
| 75334 | DOUBLE OFFSET RING WRENCH 21 - 26 MM NON SPARKING Cu-Be | 1 | |
| 75335 | DOUBLE OFFSET RING WRENCH 21 - 26 MM NON SPARKING Al-Bron | 1 | |
| 75336 | DOUBLE OFFSET RING WRENCH 22 - 23 MM NON SPARKING Cu-Be | 1 | |
| 75337 | DOUBLE OFFSET RING WRENCH 22 - 23 MM NON SPARKING Al-Bron | 1 | |
| 75338 | DOUBLE OFFSET RING WRENCH 23 - 26 MM NON SPARKING Cu-Be | 1 | |
| 75339 | DOUBLE OFFSET RING WRENCH 23 - 26 MM NON SPARKING Al-Bron | 1 | |
| 75340 | DOUBLE OFFSET RING WRENCH 24 - 25 MM NON SPARKING Cu-Be | 1 | |
| 75341 | DOUBLE OFFSET RING WRENCH 24 - 25 MM NON SPARKING Al-Bron | 1 | |
| 75342 | DOUBLE OFFSET RING WRENCH 29 - 32 MM NON SPARKING Cu-Be | 1 | |
| 75343 | DOUBLE OFFSET RING WRENCH 29 - 32 MM NON SPARKING Al-Bron | 1 | |
| 75344 | DOUBLE OFFSET RING WRENCH 32 - 34 MM NON SPARKING Cu-Be | 1 | |
| 75345 | DOUBLE OFFSET RING WRENCH 32 - 34 MM NON SPARKING Al-Bron | 1 | |
| 75350 | DOUBLE OFFSET RING WRENCH 38 - 42 MM NON SPARKING Cu-Be | 1 | |
| 75351 | DOUBLE OFFSET RING WRENCH 38 - 42 MM NON SPARKING Al-Bron | 1 | |
| 75373 | DOUBLE OFFSET RING WRENCH 1.1/2" - 1.9/16" NON SPARKING Cu-Be | 1 | |
| 75374 | DOUBLE OFFSET RING WRENCH 1.1/2" - 1.9/16" NON SPARKING Al-Bron | 1 | |
| 75375 | DOUBLE OFFSET RING WRENCH 2" - 2.3/16" NON SPARKING Cu-Be | 1 | |
| 75376 | DOUBLE OFFSET RING WRENCH 2" - 2.3/16" NON SPARKING Al-Bron | 1 | |
| 75377 | DOUBLE OFFSET RING WRENCH 2.3/16" - 2.3/8" NON SPARKING Cu-Be | 1 | |
| 75378 | DOUBLE OFFSET RING WRENCH 2.3/16" - 2.3/8" NON SPARKING Al-Bron | 1 | |
| 75379 | DOUBLE OFFSET RING WRENCH 2.3/8" - 2.3/4" NON SPARKING Cu-Be | 1 | |
| 75380 | DOUBLE OFFSET RING WRENCH 2.3/8" - 2.3/4" NON SPARKING Al-Bron | 1 | |
| 75381 | DOUBLE OFFSET RING WRENCH 2.9/16" - 2.3./4" NON SPARKING Cu-Be | 1 | |
| 75382 | DOUBLE OFFSET RING WRENCH 2.9/16" - 2.3./4" NON SPARKING Al-Bron | 1 | |
| 75383 | DOUBLE OFFSET RING WRENCH 2.3/4" - 2.15./16" NON SPARKING Cu-Be | 1 | |
| 75384 | DOUBLE OFFSET RING WRENCH 2.3/4" - 2.15./16" NON SPARKING Al-Bron | 1 | |
| 75401 | SLOGGING RING WRENCH 2.1/16" NON SPARKING Cu-Be | 1 | |
| 75402 | SLOGGING RING WRENCH 2.1/8" NON SPARKING Cu-Be | 1 | |
| 75403 | SLOGGING RING WRENCH 2.13/64" NON SPARKING Cu-Be | 1 | |
| 75404 | SLOGGING RING WRENCH 2.13/64" NON SPARKING Al-Bron | 1 | |
| 75405 | SLOGGING RING WRENCH 2.7/16" NON SPARKING Cu-Be | 1 | |
| 75412 | SLOGGING RING WRENCH 4.1/2" NON SPARKING Cu-Be | 1 | |
| 75413 | SLOGGING RING WRENCH 4.1/2" NON SPARKING Al-Bron | 1 | |
| 75418 | DOUBLE ENDED FLAT RING SPANNER 10 - 12 MM NON SPARKING Cu-Be | 1 | |
| 75419 | DOUBLE ENDED FLAT RING SPANNER 10 - 12 MM NON SPARKING Al-Bron | 1 | |
| 75420 | DOUBLE ENDED FLAT RING SPANNER 19 - 22 MM NON SPARKING Cu-Be | 1 | |
| 75421 | DOUBLE ENDED FLAT RING SPANNER 19 - 22 MM NON SPARKING Al-Bron | 1 | |
| 75428 | OFFSET RING STRUCTURAL WRENCH 12 MM NON SPARKING Cu-Be | 1 | |
| 75429 | OFFSET RING STRUCTURAL WRENCH 12 MM NON SPARKING Al-Bron | 1 | |
| 75442 | OFFSET RING STRUCTURAL WRENCH 21 MM NON SPARKING Cu-Be | 1 | |
| 75443 | OFFSET RING STRUCTURAL WRENCH 21 MM NON SPARKING Al-Bron | 1 | |
| 75465 | OFFSET SLOGGING RING WRENCH 22 MM NON SPARKING Cu-Be | 1 | |
| 75466 | OFFSET SLOGGING RING WRENCH 22 MM NON SPARKING Al-Bron | 1 | |
| 75467 | OFFSET SLOGGING RING WRENCH 24 MM NON SPARKING Cu-Be | 1 | |
| 75468 | OFFSET SLOGGING RING WRENCH 24 MM NON SPARKING Al-Bron | 1 | |
| 75469 | DOUBLE OFFSET RING WRENCH 26 - 32 MM NON SPARKING Cu-Be | 1 | |
| 75470 | DOUBLE OFFSET RING WRENCH 26 - 32 MM NON SPARKING Al-Bron | 1 | |
| 75473 | SINGLE END RING WRENCH 1.1/2" NON SPARKING Al-Bron | 1 | |
| 75476 | SINGLE END RING WRENCH 2" NON SPARKING Al-Bron | 1 | |
| 76020 | RING RATCHET WRENCH 1/2" 1000 V | 1 | |
| 76026 | SLOGGING RING WRENCH 2.3/16" NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 76027 | SLOGGING RING WRENCH 2.3/16" NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 76028 | SLOGGING RING WRENCH 2.1/4" NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 76029 | SLOGGING RING WRENCH 2.1/4" NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 76030 | SLOGGING RING WRENCH 2.3/8" NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 76031 | SLOGGING RING WRENCH 2.3/8" NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 76033 | SLOGGING RING WRENCH 2.1/2" NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 76034 | SLOGGING RING WRENCH 2.1/2" NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 76035 | SLOGGING RING WRENCH 2.9/16" NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 76036 | SLOGGING RING WRENCH 2.9/16" NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 76037 | SLOGGING RING WRENCH 2.3/4" NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 76038 | SLOGGING RING WRENCH 2.3/4" NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 76446 | SET OF 8 DOUBLE OFFSET RING WRENCHES 6-7 MM / 20-22 MM NON SPARKING Cu-Be | 1 | |
| 76447 | SET OF 8 DOUBLE OFFSET RING WRENCHES 6-7 MM /20-22 MM NON SPARKING Al-Bron | 1 | |
| 76448 | SET OF 10 DOUBLE OFFSET RING WRENCHES 6-7 MM /24 - 26 MM NON SPARKING Cu-Be | 1 | |
| 76449 | SET OF 10 DOUBLE OFFSET RING WRENCHES 6-7 MM /24-26 MM NON SPARKING Al-Bron | 1 | |
| 76450 | SET OF 12 DOUBLE OFFSET RING WRENCHES 6-7 MM /30-32 MM NON SPARKING Cu-Be | 1 | |
| 76451 | SET OF 12 DOUBLE OFFSET RING WRENCHES 6-7 MM /30-32 MM NON SPARKING Al-Bron | 1 | |
| 76458 | SET OF 12 DOUBLE OFFSET RING WRENCHES 1/4" - 5/16" /1.1/16" - 1.1/4" NON SPARKING Cu-Be | 1 | |
| 76459 | SET OF 12 DOUBLE OFFSET RING WRENCHES 1/4" -5/16" /1.1/16" - 1.1/4" NON SPARKING Al-Bron | 1 | |
| 76523 | OFFSET RING STRUCTURAL WRENCH 23 MM NON SPARKING Cu-Be | 1 | |
| 76524 | OFFSET RING STRUCTURAL WRENCH 23 MM NON SPARKING Al-Bron | 1 | |
| 76718 | SINGLE END RING WRENCH 23 MM NON SPARKING Cu-Be | 1 | |
| 76719 | SINGLE END RING WRENCH 23 MM NON SPARKING Al-Bron | 1 | |
| 76720 | SINGLE END RING WRENCH 25 MM NON SPARKING Cu-Be | 1 | |
| 76721 | SINGLE END RING WRENCH 25 MM NON SPARKING Al-Bron | 1 | |
| 76722 | SINGLE END RING WRENCH 26 MM NON SPARKING Cu-Be | 1 | |
| 76723 | SINGLE END RING WRENCH 26 MM NON SPARKING Al-Bron | 1 | |
| 76724 | SINGLE END RING WRENCH 28 MM NON SPARKING Cu-Be | 1 | |
| 76725 | SINGLE END RING WRENCH 28 MM NON SPARKING Al-Bron | 1 | |
| 76726 | SINGLE END RING WRENCH 29 MM NON SPARKING Cu-Be | 1 | |
| 76727 | SINGLE END RING WRENCH 29 MM NON SPARKING Al-Bron | 1 | |
| 76755 | DOUBLE OFFSET RING WRENCH 2.3/8" - 2.7/16" NON SPARKING Cu-Be | 1 | |
| 76756 | DOUBLE OFFSET RING WRENCH 2.3/8" - 2.7/16" NON SPARKING Al-Bron | 1 | |
| 76781 | DOUBLE ENDED FLAT RING SPANNER 7/32" - 1/4" NON SPARKING Cu-Be | 1 | |
| 76782 | DOUBLE ENDED FLAT RING SPANNER 7/32" - 1/4" NON SPARKING Al-Bron | 1 | |
| 76791 | DOUBLE ENDED FLAT RING SPANNER 1/2" - 5/8" NON SPARKING Cu-Be | 1 | |
| 76792 | DOUBLE ENDED FLAT RING SPANNER 1/2" - 5/8" NON SPARKING Al-Bron | 1 | |
| 76795 | DOUBLE ENDED FLAT RING SPANNER 5/8" - 25/32" NON SPARKING Cu-Be | 1 | |
| 76796 | DOUBLE ENDED FLAT RING SPANNER 5/8" - 25/32" NON SPARKING Al-Bron | 1 | |
| 76827 | OFFSET SLOGGING RING WRENCH 2.3/16" NON SPARKING Cu-Be | 1 | |
| 76828 | OFFSET SLOGGING RING WRENCH 2.3/16" NON SPARKING Al-Bron | 1 | |
| 76829 | OFFSET SLOGGING RING WRENCH 2.9/16" NON SPARKING Cu-Be | 1 | |
| 76830 | OFFSET SLOGGING RING WRENCH 2.9/16" NON SPARKING Al-Bron | 1 | |
| 76850 | SLOGGING RING WRENCH 3.1/2" NON SPARKING Cu-Be | 1 | |
| 76851 | SLOGGING RING WRENCH 3.1/2" NON SPARKING Al-Bron | 1 | |
| 76895 | DOUBLE OFFSET RING WRENCH 1.1/8" - 1.1/2" NON SPARKING Cu-Be | 1 | |
| 76896 | DOUBLE OFFSET RING WRENCH 1.1/8" - 1.1/2" NON SPARKING Al-Bron | 1 | |
| 77134 | DOUBLE ENDED FLAT RING SPANNER 26 - 28 MM NON SPARKING Cu-Be | 1 | |
| 77135 | DOUBLE ENDED FLAT RING SPANNER 26 - 28 MM NON SPARKING Al-Bron | 1 | |
| 77138 | DOUBLE ENDED FLAT RING SPANNER 1/2" - 19/32" NON SPARKING Cu-Be | 1 | |
| 77139 | DOUBLE ENDED FLAT RING SPANNER 1/2" - 19/32" NON SPARKING Al-Bron | 1 | |
| 77148 | DOUBLE ENDED FLAT RING SPANNER 1.1/2" - 1.5/8" NON SPARKING Cu-Be | 1 | |
| 77149 | DOUBLE ENDED FLAT RING SPANNER 1.1/2" - 1.5/8" NON SPARKING Al-Bron | 1 | |
| 77150 | SLOGGING RING WRENCH 21 MM NON SPARKING Cu-Be | 1 | |
| 77151 | SLOGGING RING WRENCH 21 MM NON SPARKING Al-Bron | 1 | |
| 77158 | SINGLE END RING WRENCH 42 MM NON SPARKING Cu-Be | 1 | |
| 77159 | SINGLE END RING WRENCH 42 MM NON SPARKING Al-Bron | 1 | |
| 77162 | SINGLE END RING WRENCH 52 MM NON SPARKING Cu-Be | 1 | |
| 77163 | SINGLE END RING WRENCH 52 MM NON SPARKING Al-Bron | 1 | |
| 77176 | SINGLE END RING WRENCH 82 MM NON SPARKING Cu-Be | 1 | |
| 77177 | SINGLE END RING WRENCH 82 MM NON SPARKING Al-Bron | 1 | |
| 77186 | SINGLE END RING WRENCH 1/2" NON SPARKING Cu-Be | 1 | |
| 77187 | SINGLE END RING WRENCH 1/2" NON SPARKING Al-Bron | 1 | |
| 77190 | SINGLE END RING WRENCH 19/32" NON SPARKING Cu-Be | 1 | |
| 77191 | SINGLE END RING WRENCH 19/32" NON SPARKING Al-Bron | 1 | |
| 77198 | SINGLE END RING WRENCH 25/32" NON SPARKING Cu-Be | 1 | |
| 77199 | SINGLE END RING WRENCH 25/32" NON SPARKING Al-Bron | 1 | |
| 77206 | SINGLE END RING WRENCH 31/32" NON SPARKING Cu-Be | 1 | |
| 77207 | SINGLE END RING WRENCH 31/32" NON SPARKING Al-Bron | 1 | |
| 77228 | SINGLE END RING WRENCH 2.1/8" NON SPARKING Cu-Be | 1 | |
| 77229 | SINGLE END RING WRENCH 2.1/8" NON SPARKING Al-Bron | 1 | |
| 77230 | SINGLE END RING WRENCH 2.3/16" NON SPARKING Cu-Be | 1 | |
| 77231 | SINGLE END RING WRENCH 2.3/16" NON SPARKING Al-Bron | 1 | |
| 77232 | SINGLE END RING WRENCH 2.1/4" NON SPARKING Cu-Be | 1 | |
| 77233 | SINGLE END RING WRENCH 2.1/4" NON SPARKING Al-Bron | 1 | |
| 77234 | SINGLE END RING WRENCH 2.5/16" NON SPARKING Cu-Be | 1 | |
| 77235 | SINGLE END RING WRENCH 2.5/16" NON SPARKING Al-Bron | 1 | |
| 77236 | SINGLE END RING WRENCH 2.3/8" NON SPARKING Cu-Be | 1 | |
| 77237 | SINGLE END RING WRENCH 2.3/8" NON SPARKING Al-Bron. | 1 | |
| 77238 | SINGLE END RING WRENCH 2.7/16" NON SPARKING Cu-Be | 1 | |
| 77239 | SINGLE END RING WRENCH 2.7/16" NON SPARKING Al-Bron | 1 | |
| 77240 | SINGLE END RING WRENCH 2.1/2" NON SPARKING Cu-Be | 1 | |
| 77241 | SINGLE END RING WRENCH 2.1/2" NON SPARKING Al-Bron | 1 | |
| 77242 | SINGLE END RING WRENCH 2.9/16" NON SPARKING Cu-Be | 1 | |
| 77243 | SINGLE END RING WRENCH 2.9/16" NON SPARKING Al-Bron | 1 | |
| 77244 | SINGLE END RING WRENCH 2.3/4" NON SPARKING Cu-Be | 1 | |
| 77245 | SINGLE END RING WRENCH 2.3/4" NON SPARKING Al-Bron. | 1 | |
| 77246 | SINGLE END RING WRENCH 2.15/16" NON SPARKING Cu-Be | 1 | |
| 77247 | SINGLE END RING WRENCH 2.15/16" NON SPARKING Al-Bron | 1 | |
| 77254 | SINGLE END RING WRENCH 3.1/2" NON SPARKING Cu-Be | 1 | |
| 77255 | SINGLE END RING WRENCH 3.1/2" NON SPARKING Al-Bron | 1 | |
| 77258 | SLOGGING RING WRENCH 2.13/16" NON SPARKING Cu-Be | 1 | |
| 77259 | SLOGGING RING WRENCH 2.13/16" NON SPARKING Al-Bron | 1 | |
| 77372 | RING SPANNER FOR EXTENSION 82 MM NON SPARKING Cu-Be | 1 | |
| 77373 | RING SPANNER FOR EXTENSION 82 MM NON SPARKING Al-Bron | 1 | |
| 77386 | RING SPANNER FOR EXTENSION 1.1/2" NON SPARKING Cu-Be | 1 | |
| 77387 | RING SPANNER FOR EXTENSION 1.1/2" NON SPARKING Al-Bron | 1 | |
| 77400 | RING SPANNER FOR EXTENSION 2" NON SPARKING Cu-Be | 1 | |
| 77401 | RING SPANNER FOR EXTENSION 2" NON SPARKING Al-Bron | 1 | |
| 77402 | RING SPANNER FOR EXTENSION 2.1/16" NON SPARKING Cu-Be | 1 | |
| 77403 | RING SPANNER FOR EXTENSION 2.1/16" NON SPARKING Al-Bron | 1 | |
| 77404 | RING SPANNER FOR EXTENSION 2.1/8" NON SPARKING Cu-Be | 1 | |
| 77405 | RING SPANNER FOR EXTENSION 2.1/8" NON SPARKING Al-Bron | 1 | |
| 77406 | RING SPANNER FOR EXTENSION 2.3/16" NON SPARKING Cu-Be | 1 | |
| 77407 | RING SPANNER FOR EXTENSION 2.3/16" NON SPARKING Al-Bron | 1 | |
| 77408 | RING SPANNER FOR EXTENSION 2.1/4" NON SPARKING Cu-Be | 1 | |
| 77409 | RING SPANNER FOR EXTENSION 2.1/4" NON SPARKING Al-Bron | 1 | |
| 77410 | RING SPANNER FOR EXTENSION 2.5/16" NON SPARKING Cu-Be | 1 | |
| 77411 | RING SPANNER FOR EXTENSION 2.5/16" NON SPARKING Al-Bron | 1 | |
| 77412 | RING SPANNER FOR EXTENSION 2.3/8" NON SPARKING Cu-Be | 1 | |
| 77413 | RING SPANNER FOR EXTENSION 2.3/8" NON SPARKING Al-Bron | 1 | |
| 77414 | RING SPANNER FOR EXTENSION 2.7/16" NON SPARKING Cu-Be | 1 | |
| 77415 | RING SPANNER FOR EXTENSION 2.7/16" NON SPARKING Al-Bron | 1 | |
| 77416 | RING SPANNER FOR EXTENSION 2.1/2" NON SPARKING Cu-Be | 1 | |
| 77417 | RING SPANNER FOR EXTENSION 2.1/2" NON SPARKING Al-Bron | 1 | |
| 77418 | RING SPANNER FOR EXTENSION 2.9/16" NON SPARKING Cu-Be | 1 | |
| 77419 | RING SPANNER FOR EXTENSION 2.9/16" NON SPARKING Al-Bron | 1 | |
| 77420 | RING SPANNER FOR EXTENSION 2.5/8" NON SPARKING Cu-Be | 1 | |
| 77421 | RING SPANNER FOR EXTENSION 2.5/8" NON SPARKING Al-Bron | 1 | |
| 77422 | RING SPANNER FOR EXTENSION 2.3/4" NON SPARKING Cu-Be | 1 | |
| 77423 | RING SPANNER FOR EXTENSION 2.3/4" NON SPARKING Al-Bron | 1 | |
| 77424 | RING SPANNER FOR EXTENSION 2.13/16" NON SPARKING Cu-Be | 1 | |
| 77425 | RING SPANNER FOR EXTENSION 2.13/16" NON SPARKING Al-Bron | 1 | |
| 77426 | RING SPANNER FOR EXTENSION 2.15/16" NON SPARKING Cu-Be | 1 | |
| 77427 | RING SPANNER FOR EXTENSION 2.15/16" NON SPARKING Al-Bron | 1 | |
| 77438 | OFFSET RING STRUCTURAL WRENCH 20 MM NON SPARKING Cu-Be | 1 | |
| 77439 | OFFSET RING STRUCTURAL WRENCH 20 MM NON SPARKING Al-Bron | 1 | |
| 77440 | OFFSET RING STRUCTURAL WRENCH 25 MM NON SPARKING Cu-Be | 1 | |
| 77441 | OFFSET RING STRUCTURAL WRENCH 25 MM NON SPARKING Al-Bron | 1 | |
| 77442 | OFFSET RING STRUCTURAL WRENCH 26 MM NON SPARKING Cu-Be | 1 | |
| 77443 | OFFSET RING STRUCTURAL WRENCH 26 MM NON SPARKING Al-Bron | 1 | |
| 77444 | OFFSET RING STRUCTURAL WRENCH 28 MM NON SPARKING Cu-Be | 1 | |
| 77445 | OFFSET RING STRUCTURAL WRENCH 28 MM NON SPARKING Al-Bron | 1 | |
| 77446 | OFFSET RING STRUCTURAL WRENCH 29 MM NON SPARKING Cu-Be | 1 | |
| 77447 | OFFSET RING STRUCTURAL WRENCH 29 MM NON SPARKING Al-Bron | 1 | |
| 77456 | OFFSET RING STRUCTURAL WRENCH 42 MM NON SPARKING Cu-Be | 1 | |
| 77457 | OFFSET RING STRUCTURAL WRENCH 42 MM NON SPARKING Al-Bron | 1 | |
| 77464 | OFFSET RING STRUCTURAL WRENCH 25/32" NON SPARKING Cu-Be | 1 | |
| 77465 | OFFSET RING STRUCTURAL WRENCH 25/32" NON SPARKING Al-Bron | 1 | |
| 77468 | OFFSET RING STRUCTURAL WRENCH 31/32" NON SPARKING Cu-Be | 1 | |
| 77469 | OFFSET RING STRUCTURAL WRENCH 31/32" NON SPARKING Al-Bron | 1 | |
| 77564 | SLOGGING RING WRENCH 23 MM NON SPARKING Cu-Be | 1 | |
| 77565 | SLOGGING RING WRENCH 23 MM NON SPARKING Al-Bron | 1 | |
| 79161 | STRAIGHT SINKER FOR DEBURRING 1/2" | 1 | |
| 79209 | RETAINING RING ES-12 | 1 | |
| 79310 | OFFSET RING WRENCH 12 MM NON SPARKING Cu-Be (1000 V) | 1 | |
| 79318 | OFFSET RING WRENCH 20 MM NON SPARKING Cu-Be (1000 V) | 1 | |
| 79319 | OFFSET RING WRENCH 21 MM NON SPARKING Cu-Be (1000 V) | 1 | |
| 79320 | OFFSET RING WRENCH 22 MM NON SPARKING Cu-Be (1000 V) | 1 | |
| 79321 | OFFSET RING WRENCH 23 MM NON SPARKING Cu-Be (1000 V) | 1 | |
| 79322 | OFFSET RING WRENCH 24 MM NON SPARKING Cu-Be (1000 V) | 1 | |
| 79323 | OFFSET RING WRENCH 25 MM NON SPARKING Cu-Be (1000 V) | 1 | |
| 79324 | OFFSET RING WRENCH 26 MM NON SPARKING Cu-Be (1000 V) | 1 | |
| 79325 | OFFSET RING WRENCH 27 MM NON SPARKING Cu-Be (1000 V) | 1 | |
| 79326 | OFFSET RING WRENCH 28 MM NON SPARKING Cu-Be (1000 V) | 1 | |
| 79327 | OFFSET RING WRENCH 29 MM NON SPARKING Cu-Be (1000 V) | 1 | |
| 79329 | OFFSET RING WRENCH 32 MM NON SPARKING Cu-Be (1000 V) | 1 | |
| 79337 | OFFSET RING WRENCH 12 MM NON SPARKING Al-Bron (1000 V) | 1 | |
| 79345 | OFFSET RING WRENCH 20 MM NON SPARKING Al-Bron (1000 V) | 1 | |
| 79346 | OFFSET RING WRENCH 21 MM NON SPARKING Al-Bron (1000 V) | 1 | |
| 79347 | OFFSET RING WRENCH 22 MM NON SPARKING Al-Bron (1000 V) | 1 | |
| 79348 | OFFSET RING WRENCH 23 MM NON SPARKING Al-Bron (1000 V) | 1 | |
| 79349 | OFFSET RING WRENCH 24 MM NON SPARKING Al-Bron (1000 V) | 1 | |
| 79350 | OFFSET RING WRENCH 25 MM NON SPARKING Al-Bron (1000 V) | 1 | |
| 79351 | OFFSET RING WRENCH 26 MM NON SPARKING Al-Bron (1000 V) | 1 | |
| 79352 | OFFSET RING WRENCH 27 MM NON SPARKING Al-Bron (1000 V) | 1 | |
| 79353 | OFFSET RING WRENCH 28 MM NON SPARKING Al-Bron (1000 V) | 1 | |
| 79354 | OFFSET RING WRENCH 29 MM NON SPARKING Al-Bron (1000 V) | 1 | |
| 79356 | OFFSET RING WRENCH 32 MM NON SPARKING Al-Bron (1000 V) | 1 | |
| 79424 | RING RATCHET WRENCH 12 MM 1000 V | 1 | |
| 80049 | SPRING SET FOR STILLSON PIPE WRENCH 12" | 1 | |
| 80052 | SPRING SET FOR STILLSON PIPE WRENCH 24" | 1 | |
| 81024 | SET OF SPRINGS FOR HD PIPE WRENCH 12" | 1 | |
| 81027 | SET OF SPRINGS FOR HD PIPE WRENCH 24" | 1 | |
| 83000 | O RING Ø 10,78 X 2,62 FOR ELECTRIC TESTING PUMP | 1 | |
| 83352 | 83352;390XOPT051 Site Monitoring Application | 1 | |
| 85101 | SPRING Ø 22 MM AND 5 M | 3 | |
| 85103 | SPRING Ø 16 MM AND 2,5 M | 1 | |
| 88656 | Henkel 97207 LOCTITE 10 mL Natural Syringe Barrel Kit | 1 | |
| 88657 | Henkel 97208 LOCTITE 10 ml Syringe Airline Adapter - Pack of 2 | 1 | |
| 88677 | Henkel 97244 LOCTITE 30 mL Natural Syringe Barrel Kit | 1 | |
| 88678 | Henkel 97245 LOCTITE 30 55 mL Syringe Airline Adapter - Pack of 2 | 3 | |
| 90440 | HEARING PROTECTION.WEIGHT 8 OZ (227 G). | 1 | |
| 105112 | SYRINGE 20 CC | 5 | |
| 135560 | Henkel 97215 LOCTITE Cartridge to Syringe Adapter | 1 | |
| 144316 | KEEP RING - MLG A320NEO | 1 | |
| 218275 | Henkel 97248 LOCTITE Orange Syringe Tip Cap - Pack of 50 | 1 | |
| 218286 | Henkel 97264 LOCTITE 30 mL Black Syringe Kit | 1 | |
| 229682 | PPG Semco 229682 Model 550 20 oz O-Ring | 1 | |
| 232683 | PPG Semco 232683 Gray Rubber Syringe Tip Cap | 1 | |
| 232991 | PPG Semco 232991 Red Plastic Syringe Tip Cap | 1 | |
| 240056 | PPG Semco 240056 Model 250-B Retainer GuardRing | 1 | |
| 286096 | PPG Semco 286096 Model 195 Teflon O-Ring (2 Required) | 1 | |
| 286182 | PPG Semco 286182 Model 195 O-Ring | 1 | |
| 286184 | PPG Semco 286184 Model 195 Viton O-Ring (2 Required) | 1 | |
| 286281 | PPG Semco 286281 Model 272, 276, 507A, 550 O-Ring | 1 | |
| 289485 | ELECTRONIC BOARD FOR COUNTING TURNS OF LOW SENSOR OF TORQUE TOOL OCEANEERING 289485 | 1 | |
| 310025 | PPG Semco 310025 14 NPT Threaded Syringe Filler Adapter | 1 | |
| 312000 | PPG Semco 312000 20cc Syringe Adapter Head with Hose Assembly | 1 | |
| 312007 | PPG Semco 312007 20cc Luer Plastic Slip Syring Barrel | 1 | |
| 312016 | PPG Semco 312016 20cc Luer Plastic Lock Syring Barrel | 1 | |
| 416228 | SYRINGE WITH M8 NOZZLE 12 MM ASSEMBLY | 2 | |
| 416231 | SYRINGE WITH NOZZLE 20MM | 1 | |
| 416232 | SYRINGE ASSEMBLY (WITH NOZZLE 20 MM (0.79 IN) | 1 | |
| 416233 | SYRINGE WITH M8 NOZZLE 24 MM ASSEMBLY | 1 | |
| 446895 | O RING SEAL DIA 12 SIMRIT) | 1 | |
| 472995 | HYDRAULIC/CONNECTING ROD REPAIR KIT TOOL NO. 472995 USED DURING DISMANTLING AND FITTING INLET AND EXHAUST VALVES | 1 | |
| 473015 | REPLACEMENT HOSES TOOL NO. 473015 THIS KIT CONTAINS ALL HYDRAULIC SEALS CAPABLE OF REBUILDING ONE HYDRAULIC JACK OF THE AA293268 CYLINDER HEAD/MAIN BEARING HYDRAULIC FIXTURE. | 1 | |
| 506644 | ANVIL 1/2IN EXT. FRICTION RING | 1 | |
| 526558 | 526558 - RETAINING RING. | 1 | |
| 574119 | FORK (TO REMOVE RETAI- NING RING (1-280)) | 1 | |
| 586134 | STAND (TO REMOVE HAIR SPRING (2-100)) | 1 | |
| 586135 | ANVIL (TO REMOVE THE ROCKING SHAFT HAIRSPRING, ST 0012) | 1 | |
| 677280 | Henkel 98192 LOCTITE Manual Plunger for 10 ml Syringes - Pack of 2 | 1 | |
| 701735 | RETAINING RING - ISW-12 | 1 | |
| 756202 | JET BRAND FOOT SHEARS 16 GAUGE 52 SHEARING CAPAC | 2 | |
| 831630 | Fixture, Flush, No. 2 Bearing Seal Retainer | 1 | |
| 834731 | Centering Fixture, 1st and 2nd Stage Impeller Axial Tip Clearance | 1 | |
| 876489 | PULLER ASSY., FOR BALL BEARING 15*32*8., OIL INLET FLANGE OIL INLET COVER | 1 | |
| 877110 | GUIDE SLEEVE FOR O-RING 3.2*1.8 IDLE MIXTURE SCREW AND IDLE JET 35 | 1 | |
| 877320 | PRESS-IN RING FOR BALL BEARING 35-72-17 , PROPELLER SHAFT HANDLE WITH PART NO : 876518 | 1 | |
| 877594 | PRESS-IN JIG FOR ROLLER BEARING 25*52*15 AND OIL SEAL 30*52*7 , FOR F2 | 1 | |
| 877840 | SPRING CLAMP PLIERS FOR SPRING TYPE HOSE CLIP 28 | 1 | |
| 944022 | O-RING TOOL SET, BRASS 2 PCS | 1 | |
| 955011 | RETAINING RING L2320 | 1 | |
| 1100698 | BEARING PUSHER (2 IT) | 1 | |
| 1100699 | BEARING PUSHER NEST(2 IT) | 1 | |
| 01190012 | 440.12-1/4DR x 12mm CROW RING SPANNER | 1 | |
| 01490032 | 440.A.1/2-1/4DR x 1/2"AF CROW RING | 1 | |
| 01860202 | MEASURING INSERT FOR IRB 2MM | 1 | |
| 2000108 | Reducer for TB3/TB125. Includes ball lock pin for securing reducer in towbar. Converts 3-1/4" ID multi-head bar to 3" ID to allow smaller corporate heads to fit larger bar. | 1 | |
| 2000160 | TB125-15 Split (15-foot) aluminum towbar with linear shear protection and limited tow-eye rotation. NOTE: Designed for towing applications requiring more tug-aircraft clearance (such as for Falcon aircraft), this towbar is a two-piece bar consisting of | 1 | |
| 2000443 | BEC2 towbar head for Beech King Air; 1900, C-12 Huron and Merlin 11, Emivest (Sino-Swearingen) SJ30-2. Compatible towbar(s): TB1, TB2.5, TB3 (w/Reducer), TB125 (w/Reducer). | 1 | |
| 2000488 | SMW1 towbar head for Metro and Merlin aircraft. Fairchild (Swearingen) Merlin and Fairchild Aerospace Metro II, III & 23 aircraft. Compatible towbar(s): TB1, TB2.5, TB3 (w/Reducer), TB125 (w/Reducer) | 1 | |
| 2001381 | Helicopter towbar is designed to fit the 2" rings on the skid tubes on Bell 212, 412, 429, UH-1, AH-1 | 1 | |
| 2001382 | Military/civilian helicopter towbar for BELL UH-1, 205, 212, 412 Types.Designed for one man operation. This tow bar is designed for the Bell Helicopters with the 4" skid tubes and 2" tow rings. This towbar eliminates the need for a man on the stinger. Th | 1 | |
| 2001823 | Gulfstream G2-G650 aircraft towbar. Fits G2, G300-350, G400-450, G5-500/550/650. Includes TB125 multi-head aircraft towbar and G2-650 towbar head (000194 TB125 + 000582 G2-650 towbar head). NOTE: Crating is required for protection of towbars during tra | 1 | |
| 2001995 | TB125-15 (15-foot) aluminum towbar with linear shear protection and limited tow-eye rotation. NOTE: Designed for towing applications requiring more tug-aircraft clearance (such as for Falcon aircraft), this towbar is a one piece bar. It has the same 125 | 1 | |
| 2004013 | 2795 Single LD1/LD2/LD3 Container Dolly/Trailer, 3500 lb. capacity, handles (1) ea LD1/LD2 or LD3 container, handles, 4 WHEEL STEERING (Double Ackerman). | 1 | |
| 2004049 | 2890 Double LD2/LD3 Dolly. 7000 lb. capacity, handles (2) ea LD2/LD3 or (1) LD8/LD11 container, unit comes standard with 2 WHEEL Ackerman steering. | 1 | |
| 2004055 | Model 3680 roller deck pallet trailer with side loading: 96"x125" & 88" x 125" spring loaded stops, grip strut walkway, 15,000 Lb cargo capacity, heavy-duty applications. | 1 | |
| 2004084 | Model 3083 20' Roller Deck Side Load Pallet Trailer. Pallet capacity: (2) 96"x125" OR (1) 96"X240" pallet. Spring loaded stops, grip strut walkways, 30,000 lbs. cargo capacity, heavy-duty applications. | 1 | |
| 2004790 | Brackett Lightweight Universal Towbar featuring Class II, 2" Ball Hitch, good for hand or tug towing of aircraft. 4,000 Lbs. Max Capacity. | 1 | |
| 2007273 | Pilatus PC12 towbar with integrated tow head. 2-piece,slide together steel bar with shock ring hitch. | 1 | |
| 2007670 | Universal Towbar with RING HITCH, PN: 53R, handles aircraft up to 7000 Lb. Max Capacity. Length: 80" (203 cm) closed, 94" (234 cm) extended. | 1 | |
| 2007763 | TR-6B Ball Hitch (Class II, 2 Inch) Towbar for towing tail wheeled aircraft; P-51, T6, Stearman, Beechcraft Model 18, staggering, etc. | 1 | |
| 2007831 | Flat Tire Dolly with 6,000 lbs. capacity (can be also used as a Towbar if needed), equipped with ring type hitch. Specifications: Length - 12 feet (3.65m); Pan - 20" x26" (50.8cm x 66cm) L; Weight - 300 lbs (136kg); Pan Capacity - 6,000 lb (2721.5kg); Wi | 1 | |
| 2016678 | PV45-1 (208-480V input) 90kVA, 400 Hz Solid-State GPU, USA Model. Specify one of the following input voltages when ordering: 208, 240, 400, 480 - x2 Cable horns (no cable tray) - Exclusions: input lead / output lead / shipping crate | 1 | |
| 2020323 | TRU-28 (208-480V input). 28VDC tranformer/rectifier Specify one of the following input voltages when ordering: 208, 240, 400, 480 - Exclusions: input lead / output lead / shipping crate | 1 | |
| 02190020 | 440.20-3/8DR x 20mm CROW RING SPANNER | 1 | |
| 02190021 | 440.21-3/8DR x 21mm CROW RING SPANNER | 1 | |
| 02190022 | 440.22-3/8DR x 22mm CROW RING SPANNER | 1 | |
| 02190023 | 440.23-3/8DR x 23mm CROW RING SPANNER | 1 | |
| 02190024 | 440.24-3/8DR x 24mm CROW RING SPANNER | 1 | |
| 02190025 | 440.25-3/8DR x 25mm CROW RING SPANNER | 1 | |
| 02190026 | 440.26-3/8DR x 26mm CROW RING SPANNER | 1 | |
| 02190027 | 440.27-3/8DR x 27mm CROW RING SPANNER | 1 | |
| 02191027 | 440.27MB-CROW-RING-SPANNER 27MB 3/8 D | 1 | |
| 02211020 | 440SMJ.20-CROW-RING SPANNER SPEC MOD. | 1 | |
| 02211022 | 440SMJ.22-CROW-RING SPANNER SPEC MOD. | 1 | |
| 02211024 | 440SMJ.24-CROW-RING SPANNER SPEC MOD. | 1 | |
| 02211027 | 440SMJ.27-CROW-RING SPANNER SPEC MOD. | 1 | |
| 2558782 | DRIVER, BEARING CUP REMOVAL, IB AND OB WHEEL HALF,USED WITH KIT P/N 2558782 | 1 | |
| 2558783 | FIXTURE, BEARING CUP/SLEEVE REMOVAL, IB AND OB WHEEL HALF,USED WITH KIT P/N 2558782 | 1 | |
| 2558785 | SNAP RING, BEARING CUP/SLEEVE REMOVAL, IB WHEEL HALF,USED WITH KIT P/N 2558782 | 1 | |
| 2558816 | BEARING CUP REMOVAL (OB) 2558818 AND 2 | 1 | |
| 2558817 | BEARING CUP REMOVAL (IN) 2558819 AND | 1 | |
| 03190028 | 440.28 - 1/2DR x 28mm CROW-RING SPANNER | 1 | |
| 03190030 | 440.30 - 1/2DR x30mm CROW-RING SPANNER | 1 | |
| 03190032 | 440.32 - 1/2DR x 32mm CROW-RING SPANNER | 1 | |
| 03190034 | 440.34 - 1/2DR x 34mm CROW-RING SPANNER | 1 | |
| 03190036 | 440.36 - 1/2DR x 36mm CROW-RING SPANNER | 1 | |
| 03190038 | 440.38 - 1/2DR x 38mm CROW-RING SPANNER | 1 | |
| 03190040 | 440.40 - 1/2DR x 40mm CROW-RING SPANNER | 1 | |
| 03190041 | 440.41 - 1/2DR x 41mm CROW-RING SPANNER | 1 | |
| 03190042 | 440.42 - 1/2DR x 42mm CROW-RING SPANNER | 1 | |
| 03190046 | 440.46 - 1/2DR x 46mm CROW-RING SPANNER | 1 | |
| 03190050 | 440.50 - 1/2DR x 50mm CROW-RING SPANNER | 1 | |
| 03490052 | 440.A.1.1/8-1/2DR x 1.1/8"AF CROW-RING | 1 | |
| 03490056 | 440.A.1.1/4-1/2DR x 1.1/4"AF CROW-RING | 1 | |
| 03490058 | 440.A.1.5/16-1/2DR x 1.5/16"AF CROW-RING | 1 | |
| 03490060 | 440.A.1.3/8-1/2DR x 1.3/8"AF CROW-RING | 1 | |
| 03490062 | 440.A.1.7/16-1/2DR x 1.7/16"AF CROW-RING | 1 | |
| 03490064 | 440.A.1.1/2-1/2DR x 1.1/2"AF CROW-RING | 1 | |
| 03490065 | 440.A.1.9/16-1/2DR x 1.9/16"AF CROW-RING | 1 | |
| 03490066 | 440.A.1.5/8-1/2DR x 1.5/8"AF CROW-RING | 1 | |
| 03490068 | 440.A.1.3/4-1/2DR x 1.3/4"AF CROW-RING | 1 | |
| 03490069 | 440.A.1.13/16-1/2DR x 1.13/16"AF CROW-RING | 1 | |
| 03490072 | 440.A.2-1/2DR x 2"AF CROW-RING | 1 | |
| 03490076 | 440.A.2.1/4-1/2DR x 2.1/4"AF CROW-RING | 1 | |
| 03490077 | 440.A.2.5/16-1/2DR x 2.5/16"AF CROW-RING | 1 | |
| 03490078 | 440.A.2.3/8-1/2DR x 2.3/8"AF CROW -RING | 1 | |
| 5012373 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS H27 X 8.5 -14 | 1 | |
| 6198830 | O-RING 36.17X2.62-EPDM-80SH | 1 | |
| 6797939 | COMPRESSOR - 3.921 INCH OD SPLIT SEAL RING | 2 | |
| 6797940 | COMPRESSOR - 6.250 OD SPLIT SEAL RING | 2 | |
| 6798927 | CRIMPER-NO. 2 BEARING NUT LOCKING | 2 | |
| 6893515 | PLATE, PULLER 12MM X 37MM X 12MM BEARING ACCESSORIES GEAR BOX | 2 | |
| 6893517 | PLATE- 12 Plate â 12mm x 28mm x 8mm Bearing Puller, Accessory Gear Box | 2 | |
| 6893521 | PLATE, 15MM X 42MM X 13MM BEARING PULLER, ACCESS GEAR BOX | 2 | |
| 6893538 | PULLER - NO. 2 1/2 BEARING | 3 | |
| 008820001 | 882-BIT HOLDER RETAINING RING FOR DRIVER (BETA) | 1 | |
| 9048049 | SPRING-CAGED ..POST SB 74-0002 | 1 | |
| 9222237 | REFLECTION RING/DONUT (ENCIRCLING) PROBE SPO-2031 RRL/100Hz-10Khz/.30-.80 (NDT) | 1 | |
| 9317808 | RIGHT ANGLE MIA PROBE, SMALL 6.35 MM (0.25") TIP DIAMETER, REQUIRES BMM-H (U8770417) FOR SPRING LOAD | 1 | |
| 9322075 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 | |
| 9322184 | SPO-5629PHV 1/2 X 1/2 BI-MORPH HIGH VOLTAGE PITCH CATCH, BROADBAND FREQUENCY, HIGH VOLTAGE, SPRING L | 1 | |
| 016910210 | BETA 016910210 1691BM/10-MEASURING TAPES BM 10M | 1 | |
| 21200200 | BEARING RADIUS INSP PROBE: PROBE 0.020 | 1 | |
| 23005425 | PULLER NO 2 BEARING INNER RACE | 2 | |
| 23005426 | 2 1/2 ENGINE BEARING TOOL | 4 | |
| 23006778 | C20- 2&1/2 Bearing Guide | 5 | |
| 23007615 | OIL SUMP AND BEARING PASSAGE CLEANING KIT: RR250 SERIES | 3 | |
| 23008668 | GUIDE----NO. 2 BEARING BALLS | 1 | |
| 23008674 | RING – CONCENTRICITY, 2ND STAGE TURBINE SPLINED ADAPTER | 2 | |
| 23033038 | MASK--SPRAY, COMPRESSOR ROTOR DIFFUSER MASKS THE REAR DIFFUSER AND NO. 2 BEARING BORE DURING APPLICATION OF SPRAY COATING FOR LABYRINTH S | 1 | |
| 23053682 | Ring – Heat Transfer 2nd & 3rd Stage Wheel, LPT Rotor | 1 | |
| 23053683 | Ring – Heat Transfer 1st & 2nd Stage Wheel, LPT Rotor | 1 | |
| 23053688 | Ring - Cryogenic, 2nd Stage Wheel Forward Shaft, LPT Rotor | 1 | |
| 23053694 | Ring – Heat Transfer 2nd Stage Wheel, LPT Rotor | 1 | |
| 23054787 | Ring - Cryogenic,2nd & 3rd Stator Wheel Assembly, LP Turbine Rotor | 1 | |
| 23054793 | Pusher – No 2 Ball Bearing | 1 | |
| 23054806 | WRENCH AND HOLDER, FAN SHAFT BEARING RETAINING NUT (USE WITH HOLDER 23054808). | 3 | |
| 23055694 | Puller – No.2B Ball Bearing Bevel Gear | 1 | |
| 23058457 | Dimple Tool – Cup Washer, No.2 Bearing And Internal Bevel Gear | 1 | |
| 23058483 | Fixture – Alignment, 2nd Stage Vane Ring To Case | 1 | |
| 39011940 | 5091/1.IMP-1/2" IMPACT RUBBER RING | 1 | |
| 39012440 | 5091/2.IMP-1/2" IMPACT RUBBER RING | 1 | |
| 41030608 | 220.6.X.8-6 X 8 mm DBL END RING SPANNER | 1 | |
| 41030911 | 220.9.X.11-9 X 11 mm DBL END RING SPANNER | 1 | |
| 41031011 | 220.10.X.11-10x11 mm DBL END RING SPANNER | 1 | |
| 41031214 | 220.12.X.14-12x14 mm DBL END RING SPANNER | 1 | |
| 41031314 | 220.13.X.14-13x14 mm DBL END RING SPANNER | 1 | |
| 41031719 | 220.17.X.19-17x19 mm DBL END RING SPANNER | 1 | |
| 41031819 | 220.18.X.19-18x19 mm DBL END RING SPANNER | 1 | |
| 41031922 | 220.19.X.22-19x22 mm DBL END RING SPANNER | 1 | |
| 41032022 | 220.20.X.22-20x22 mm DBL END RING SPANNER | 1 | |
| 41035507 | 220.5,5.X.7-5,5x7 mm DBL END RING SPANNER | 1 | |
| 41040607 | 20.6.X.7-6 X 7 DE OFFSET RING SPANNER | 1 | |
| 41040809 | 20.8.X.9-8 X 9 DE OFFSET RING SPANNER | 1 | |
| 41040810 | 20.8.X.10-8 X 10 DE OFFSET RING SPANNER | 1 | |
| 41041011 | 20.10.X.11-10 X 11 DE OFFSET RING SPANNER | 1 | |
| 41041013 | 20.10.X.13-10 X 13 DE OFFSET RING SPANNER | 1 | |
| 41041213 | 20.12.X.13-12 X 13 DE OFFSET RING SPANNER | 1 | |
| 41041317 | 20.13.X.17-13 X 17 DE OFFSET RING SPANNER | 1 | |
| 41041415 | 20.14.X.15-14 X 15 DE OFFSET RING SPANNER | 1 | |
| 41041617 | 20.16.X.17-16 X 17 DE OFFSET RING SPANNER | 1 | |
| 41041719 | 20.17.X.19-17 X 19 DE OFFSET RING SPANNER | 1 | |
| 41041819 | 20.18.X.19-18 X 19 DE OFFSET RING SPANNER | 1 | |
| 41041821 | 20.18.X.21-18 X 21 DE OFFSET RING SPANNER | 1 | |
| 41041922 | 20.19.X.22-19 X 22 DE OFFSET RING SPANNER | 1 | |
| 41042022 | 20.20.X.22-20 X 22 DE OFFSET RING SPANNER | 1 | |
| 41042123 | 20.21.X.23-21 X 23 DE OFFSET RING SPANNER | 1 | |
| 41042124 | 20.21.X.24-21 X 24 DE OFFSET RING SPANNER | 1 | |
| 41042224 | 20.22.X.24-22 X 24 DE OFFSET RING SPANNER | 1 | |
| 41042426 | 20.24.X.26-24 X 26 DE OFFSET RING SPANNER | 1 | |
| 41042427 | 20.24.X.27-24 X 27 DE OFFSET RING SPANNER | 1 | |
| 41042528 | 20.25.X.28-25 X 28 DE OFFSET RING SPANNER | 1 | |
| 41042730 | 20.27.X.30-27 X 30 DE OFFSET RING SPANNER | 1 | |
| 41042732 | 20.27.X.32-27 X 32 DE OFFSET RING SPANNER | 1 | |
| 41043032 | 20.30.X.32-30 X 32 DE OFFSET RING SPANNER | 1 | |
| 41043034 | 20.30.X.34-30 X 34 DE OFFSET RING SPANNER | 1 | |
| 41043641 | 20.36.X.41-36 X 41 DE OFFSET RING SPANNER | 1 | |
| 41044650 | 20.46.X.50-46 X 50 DE OFFSET RING SPANNER | 1 | |
| 41050607 | 21.6.X.7-6 X 7 mm DBL END RING SPANNER | 1 | |
| 41050809 | 21.8.X.9-8 X 9 mm DBL END RING SPANNER | 1 | |
| 41050810 | 21.8.X.10-8 X 10 mm DBL END RING SPANNER | 1 | |
| 41051011 | 21.10.X.11-10x11 mm DBL END RING SPANNER | 1 | |
| 41051213 | 21.12.X.13-12x13 mm DBL END RING SPANNER | 1 | |
| 41051317 | 21.13.X.17-13x17 mm DBL END RING SPANNER | 1 | |
| 41051415 | 21.14.X.15-14x15 mm DBL END RING SPANNER | 1 | |
| 41051617 | 21.16.X.17-16x17 mm DBL END RING SPANNER | 1 | |
| 41051719 | 21.17.X.19-17x19 mm DBL END RING SPANNER | 1 | |
| 41051819 | 21.18.X.19-18x19 mm DBL END RING SPANNER | 1 | |
| 41051821 | 21.18.X.21-18x21 mm DBL END RING SPANNER | 1 | |
| 41051922 | 21.19.X.22-19x22 mm DBL END RING SPANNER | 1 | |
| 41052022 | 21.20.X.22-20x22 mm DBL END RING SPANNER | 1 | |
| 41052124 | 21.21.X.24-21x24 mm DBL END RING SPANNER | 1 | |
| 41052427 | 21.24.X.27-24x27 mm DBL END RING SPANNER | 1 | |
| 41052732 | 21.27.X.32-27x32 mm DBL END RING SPANNER | 1 | |
| 41053032 | 21.30.X.32-30x32 mm DBL END RING SPANNER | 1 | |
| 41053034 | 21.30.X.34-30x34 mm DBL END RING SPANNER | 1 | |
| 41070607 | 23.6.X.7-6 X 7mm DE RING 10degOFFSET | 1 | |
| 41070809 | 23.8.X.9-8 X 9mm DE RING 10degOFFSET | 1 | |
| 41071011 | 23.10.X.11-10x11mm DE RING 10degOFFSET | 1 | |
| 41071213 | 23.12.X.13-12x13mm DE RING 10degOFFSET | 1 | |
| 41071415 | 23.14.X.15-14x15mm DE RING 10degOFFSET | 1 | |
| 41071617 | 23.16.X.17-16x17mm DE RING 10degOFFSET | 1 | |
| 41071719 | 23.17.X.19-17x19mm DE RING 10degOFFSET | 1 | |
| 41071819 | 23.18.X.19-18x19mm DE RING 10degOFFSET | 1 | |
| 41072022 | 23.20.X.22-20x22mm DE RING 10degOFFSET | 1 | |
| 41072123 | 23.21.X.23-21x23mm DE RING 10degOFFSETR | 1 | |
| 41072427 | 23.24.X.27-24x27mm DE RING 10degOFFSET | 1 | |
| 41073032 | 23.30.X.32-30x32mm DE RING 10degOFFSET | 1 | |
| 41080810 | 24.8.X.10-8X10 DBL END OPEN RING SPANNER | 1 | |
| 41080911 | 24.9.X.11-9X11 DBL END OPEN RING SPANNER | 1 | |
| 41081011 | 24.10.X.11-10X11 DBL END OPENRING SPANNER | 1 | |
| 41081012 | 24.10.X.12-10X12 DBL END OPENRING SPANNER | 1 | |
| 41081113 | 24.11.X.13-11X13 DBL END OPENRING SPANNER | 1 | |
| 41081214 | 24.12.X.14-12X14 DBL END OPENRING SPANNER | 1 | |
| 41081417 | 24.14.X.17-14X17 DBL END OPENRING SPANNER | 1 | |
| 41081619 | 24.16.X.19-16X19 DBL END OPENRING SPANNER | 1 | |
| 41081719 | 24.17.X.19-17X19 DBL END OPENRING SPANNER | 1 | |
| 41081922 | 24.19.X.22-19X22 DBL END OPENRING SPANNER | 1 | |
| 41082224 | 24.22.X.24-22X24 DBL END OPENRING SPANNER | 1 | |
| 41082427 | 24.24.X.27-24X27 DBL END OPENRING SPANNER | 1 | |
| 41082736 | 24.27.X.36-27X36 DBL END OPENRING SPANNER | 1 | |
| 41083032 | 24.30.X.32-30X32 DBL END OPENRING SPANNER | 1 | |
| 41091012 | 27.10.X.12-10x12mm DBL END RING STARTER | 1 | |
| 41091113 | 27.11.X.13-11x13mm DBL END RING STARTER | 1 | |
| 41091416 | 27.14.X.16-14x16mm DBL END RING STARTER | 1 | |
| 41091417 | 27.14.X.17-14x17mm DBL END RING STARTER | 1 | |
| 41091517 | 27.15.X.17-15x17mm DBL END RING STARTER | 1 | |
| 41091618 | 27.16.X.18-16x18mm DBL END RING STARTER | 1 | |
| 41091922 | 27.19.X.22-19x22mm DBL END RING STARTER | 1 | |
| 41110013 | 1023-SPECIAL RING SPANNER, 13MM | 1 | |
| 41130708 | 25.7.X.8-7 x 8mm RATCHET RING SPANNER | 1 | |
| 41130910 | 25.9.X.10-9 X 10mm RATCHET RING SPANNER | 1 | |
| 41131011 | 25.10.X.11-10x11mm RATCHET RING SPANNER | 1 | |
| 41131213 | 25.12.X.13-12x13mm RATCHET RING SPANNER | 1 | |
| 41131415 | 25.14.X.15-14x15mm RATCHET RING SPANNER | 1 | |
| 41131618 | 25.16.X.18-16x18mm RATCHET RING SPANNER | 1 | |
| 41131719 | 25.17.X.19-17x19mm RATCHET RING SPANNER | 1 | |
| 41160709 | 220ASP.7/32.X.9/32-7x9 spline EXLONG DE RING SPNR | 1 | |
| 41160810 | 220ASP.1/4.X.5/16-8x10spline EXLONG DE RING SPNR | 1 | |
| 41161214 | 220ASP.3/8.X.7/16-12x14spline EXLONG DE RINGSPNR | 1 | |
| 41161618 | 220ASP.1/2.X.9/16-16x18spline EXLONG DE RINGSPNR | 1 | |
| 41161820 | 220ASP.9/16.X.5/8-18x20spline EXLONG DE RINGSPNR | 1 | |
| 41162224 | 220ASP.11/16.X.3/4-22x24spline EXLONG DE RINGSPNR | 1 | |
| 41162630 | 220ASP.13/16X15/16-26x30spline EXLONG DE RINGSPNR | 1 | |
| 41162832 | 220ASP.7/8.X.1-28x32spline EXLONG DE RINGSPNR | 1 | |
| 41180812 | 25GK-8x12 EX LONG RATCHET RING SPNR | 1 | |
| 41250608 | 21.TX.E.6.X.E.8-E6xE8 EXT TORX DE RING SPNR | 1 | |
| 41251012 | 21.TX.E.10.X.E.12-E10xE12 EXT TORX DE RING SPNR | 1 | |
| 41251418 | 21.TX.E.14.X.E.18-E14xE18 EXT TORX DE RING SPNR | 1 | |
| 41252024 | 21.TX.E.20.X.E.24-E20xE24 EXT TORX DE RING SPNR | 1 | |
| 41431416 | 220A.7/32.X.1/4-7/32x1/4 LONG D/E RING SPNR | 1 | |
| 41431620 | 220A.1/4.X.5/16-1/4x5/16 EX LNG DE RING SPNR | 1 | |
| 41432428 | 220A.3/8.X.7/16-3/8x7/16 EX LNG DE RING SPNR | 1 | |
| 41433234 | 220A.1/2.X.9/16-1/2x9/16 EX LNG DE RING SPNR | 1 | |
| 41433640 | 220A.5/8.X.3/4-5/8x3/4 EX LNG DE RING SPNR | 1 | |
| 41433840 | 220A.11/16.X.3/4-11/16x3/4 EX LNG DE RING SPNR | 1 | |
| 41441620 | 20.A.1/4.X.5/16-1/4x5/16" DBL END RING SPANNER | 1 | |
| 41442428 | 20.A.3/8.X.7/16-3/8x7/16" DBL END RING SPANNER | 1 | |
| 41443234 | 20.A.1/2.X.9/16-1/2x9/16" DBL END RING SPANNER | 1 | |
| 41443436 | 20.A.9/16.X.5/8-9/16x5/8" DBL END RING SPANNER | 1 | |
| 41443538 | 20.A.19/32.X.11/16-19/32x11/16" DE RING SPANNER | 1 | |
| 41443640 | 20.A.5/8.X.3/4-5/8x3/4" DBL END RING SPANNER | 1 | |
| 41443842 | 20.A.11/16.X.13/16-11/16x13/16" DE RING SPANNER | 1 | |
| 41444044 | 20.A.3/4.X.7/8-3/4x7/8" DBL END RING SPANNER | 1 | |
| 41444142 | 20.A.25/32.X.13/16-25/32x13/16" DE RING SPANNER | 1 | |
| 41444446 | 20.A.7/8.X.15/16-7/8x15/16" DBL EN RING SPANNER | 1 | |
| 41444648 | 20.A.15/16.X.1-15/16x1" DBL END RING SPANNER | 1 | |
| 41445258 | 20.A.1.1/8X1.5/16-1.1/8x1.5/16" DE RING SPANNER | 1 | |
| 41481620 | 24.A.1/4.X.5/16-1/4x5/16 DEND OPENRING SPANNER | 1 | |
| 41482024 | 24.A.5/16.X.3/8-5/16x3/8 DEND OPENRING SPANNER | 1 | |
| 41482428 | 24.A.3/8.X.7/16-3/8x7/16 DEND OPENRING SPANNER | 1 | |
| 41483234 | 24.A.1/2.X.9/16-1/2x9/16 DEND OPENRING SPANNER | 1 | |
| 41483640 | 24.A.5/8.X.3/4-5/8x3/4 DEND OPENRING SPANNER | 1 | |
| 41484048 | 24.A.3/4.X.1-3/4x1" DEND OPENRING SPANNER | 1 | |
| 41551620 | 25ASP RATCHET RING 1/4” X 5/16” | 2 | |
| 41552428 | 25ASP RATCHET RING 3/8” X 7/16” | 2 | |
| 41553234 | RATCHET RING SPANNERS 1/2 x 9/16 | 2 | |
| 41561620 | 25.AN.1/4.X.5/16-1/4x5/16 RATCHET RING SPANNER | 4 | |
| 41562022 | Ratchet ring spanners 5/16 x 11/32 | 4 | |
| 41562428 | 25.AN.3/8.X.7/16-3/8x7/16 RATCHET RING SPNR | 3 | |
| 41563234 | Ratchet ring spanners 1/2 x 9/16 | 3 | |
| 41563638 | 25.AN.5/8.X.11/16-5/8x11/16 RATCHET RING SPNR | 1 | |
| 41564044 | 25.AN.3/4.X.7/8-3/4x7/8 RATCHET RING SPNR | 1 | |
| 41564246 | 25.AN.13/16.X.15/16-13/16x15/16 RATCHET RING SPNR | 1 | |
| 41570810 | 25ASP.8.X.10-SPLINE DR RATCHET RING SPANNER | 1 | |
| 41571214 | 25ASP.12.X.14-SPLINE DR RATCHET RING SPANNER | 1 | |
| 41571618 | 25ASP 16 X 18-16X18 RATCHET RING SPANNER | 1 | |
| 41572022 | 25ASP 20 X 22-20X22 RATCHET RING SPANNER | 1 | |
| 41572428 | 25ASP.24.X.28-SPLINE DR RATCHET RING SPANNER | 1 | |
| 41603234 | 180.A.1/2.X.9/16-1/2x9/16 SHORT DE RING SPANNER | 1 | |
| 41611620 | 230.A.1/4.X.5/16-1/4x5/16OFFSET DE RING SPANNER | 1 | |
| 41612022 | 230.A.5/16.X.11/32-5/16x11/32 OFFSET DE RING SPNR | 1 | |
| 41612024 | 230.A.5/16.X.3/8-5/16x3/8 OFFSET DE RING SPNR | 1 | |
| 41612428 | 230.A.3/8.X.7/16-3/8x7/16 OFFSET DE RING SPNR | 1 | |
| 41612832 | 230.A.7/16.X.1/2-7/16x1/2 OFFSET DE RING SPNR | 1 | |
| 41613234 | 230.A.1/2.X.9/16-1/2x9/16 OFFSET DE RING SPNR | 1 | |
| 41613436 | 230.A.9/16.X.5/8-9/16x5/8 OFFSET DE RING SPNR | 1 | |
| 41613640 | 230.A.5/8.X.3/4-5/8x3/4 OFFSET DE RING SPNR | 1 | |
| 41613840 | 230.A.11/16.X.3/4-11/16x3/4 OFFSET DE RING SPNR | 1 | |
| 41614244 | 230.A.13/16.X.7/8-13/16x7/8 OFFSET DE RING SPNR | 1 | |
| 41614648 | 230.A.15/16.X.1-15/16x1" OFFSET DE RING SPNR | 1 | |
| 41614850 | 230.A.1.X.1.1/16-1"x1.1/16" OFFSET DE RING SPNR | 1 | |
| 41615256 | 230.A.1.1/8X1.1/4-1.1/8x1.1/4" OFF DE RING SPNR | 1 | |
| 42010032 | 8.32-32MM STRIKING RING SPANNERS | 1 | |
| 42010120 | 8.120-120MM STRIKING RING SPANNERS | 1 | |
| 42020024 | 5.24-24mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020027 | 5.27-27mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020032 | 5.32-32mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020042 | 5.42-42mm HEAVY DUTY RING SPANNERS | 1 | |
| 42050024 | 4205.24-24mm STRIKING FACE RING WRENCH | 1 | |
| 42050026 | 4205.26-26mm STRIKING FACE RING WRENCH | 1 | |
| 42050027 | 4205.27-27MM STRIKING FACE RING WRENCH | 1 | |
| 42050030 | 4205.30-30MM STRIKING FACE RING WRENCH | 1 | |
| 42050032 | 4205.32-32MM STRIKING FACE RING WRENCH | 1 | |
| 42050036 | 4205.36-36MM STRIKING FACE RING WRENCH | 1 | |
| 42050038 | 4205.38-38MM STRIKING FACE RING WRENCH | 1 | |
| 42050041 | 4205.41-41MM STRIKING FACE RING WRENCH | 1 | |
| 42050042 | 4205.42-42MM STRIKING FACE RING WRENCH | 1 | |
| 42050046 | 4205.46-46MM STRIKING FACE RING WRENCH | 1 | |
| 42050048 | 4205.48-48MM STRIKING FACE RING WRENCH | 1 | |
| 42050050 | 4205.50-50MM STRIKING FACE RING WRENCH | 1 | |
| 42050055 | 4205.55-55MM STRIKING FACE RING WRENCH | 1 | |
| 42050057 | 4205.57-57MM STRIKING FACE RING WRENCH | 1 | |
| 42050060 | 4205.60-60MM STRIKING FACE RING WRENCH | 1 | |
| 42050065 | 4205.65-65MM STRIKING FACE RING WRENCH | 1 | |
| 42050070 | 4205.70-70MM STRIKING FACE RING WRENCH | 1 | |
| 42050075 | 4205.75-75MM STRIKING FACE RING WRENCH | 1 | |
| 42050080 | 4205.80-80MM STRIKING FACE RING WRENCH | 1 | |
| 42050085 | 4205.85-85MM STRIKING FACE RING WRENCH | 1 | |
| 42050090 | 4205.90-90MM STRIKING FACE RING WRENCH | 1 | |
| 42050095 | 4205.95-95MM STRIKING FACE RING WRENCH | 1 | |
| 42050100 | 4205.100-100MM STRIKING FACE RINGWRENCH | 1 | |
| 44190010 | 12161 VDE-10-VDE RING END SPANNER 10MM | 1 | |
| 44190013 | 12161 VDE-13-VDE RING END SPANNER 13MM | 1 | |
| 44190014 | 12161 VDE-14-VDE RING END SPANNER 14MM | 1 | |
| 44190017 | 12161 VDE-17-VDE RING END SPANNER 17MM | 1 | |
| 44190019 | 12161 VDE-19-VDE RING END SPANNER 19MM | 1 | |
| 44190022 | 12161 VDE-22-VDE RING END SPANNER 22MM | 1 | |
| 47941725 | SPRING BALANCE 25 NEWTON | 1 | |
| 58221007 | 732/10.7-7mm RING INSERT TOOL 9 X 12 | 1 | |
| 58221008 | 732/10.8-8mm RING INSERT TOOL 9 X 12 | 1 | |
| 58221010 | 732/10.10-10mm RING INSERT TOOL 9 X 12 | 1 | |
| 58221011 | 732/10.11-11mm RING INSERT TOOL 9 X 12 | 1 | |
| 58221012 | 732/10.12-12mm RING INSERT TOOL 9 X 12 | 1 | |
| 58221013 | 732/10.13-13mm RING INSERT TOOL 9 X 12 | 1 | |
| 58221014 | 732/10.14-14mm RING INSERT TOOL 9 X 12 | 1 | |
| 58221015 | 732/10.15-15mm RING INSERT TOOL 9 X 12 | 1 | |
| 58221016 | 732/10.16-16mm RING INSERT TOOL 9 X 12 | 1 | |
| 58221017 | 732/10.17-17mm RING INSERT TOOL 9X12mm | 1 | |
| 58221018 | 732/10.18-18mm RING INSERT TOOL 9 X 12 | 1 | |
| 58221019 | 732/10.19-19mm RING INSERT TOOL 9 X 12 | 1 | |
| 58221021 | 732/10.21-21mm RING INSERT TOOL 9 X 12 | 1 | |
| 58221022 | 732/10.22-22mm RING INSERT TOOL 9 X 12 | 1 | |
| 58221024 | 732/100.24-24mm RING INSERT TOOL 22X28 | 1 | |
| 58221027 | 732/100.27-27mm RING INSERT TOOL 22X28 | 1 | |
| 58221030 | 732/100.30-30mm RING INSERT TOOL 22X28 | 1 | |
| 58221032 | 732/100.32-32mm RING INSERT TOOL 22X28 | 1 | |
| 58221034 | 732/100.34-34mm RING INSERT TOOL 22X28 | 1 | |
| 58221036 | 732/100.36-36mm RING INSERT TOOL 22 X 28 | 1 | |
| 58221041 | 732/100.41-41mm RING INSERT TOOL 22 X 28 | 1 | |
| 58221046 | 732/100.46-46mm RING INSERT TOOL 22 X 28 | 1 | |
| 58221050 | 732/100.50-50mm RING INSERT TOOL 22 X 28 | 1 | |
| 58221055 | 732/100.55-55mm RING INSERT TOOL 22 X 28 | 1 | |
| 58221060 | 732/100.60-60mm RING INSERT TOOL 22 X 28 | 1 | |
| 58224013 | 732/40.13-13mm RING INSERT TOOL 14 X 18 | 1 | |
| 58224014 | 732/40.14-14mm RING INSERT TOOL 14 X 18 | 1 | |
| 58224015 | 732/40.15-15mm RING INSERT TOOL 14 X 18 | 1 | |
| 58224016 | 732/40.16-16mm RING INSERT TOOL 14 X 18 | 1 | |
| 58224017 | 732/40.17-17mm RING INSERT TOOL 14 X 18 | 1 | |
| 58224018 | 732/40.18-18mm RING INSERT TOOL 14 X 18 | 1 | |
| 58224019 | 732/40.19-19mm RING INSERT TOOL 14 X 18 | 1 | |
| 58224021 | 732/40.21-21mm RING INSERT TOOL 14 X 18 | 1 | |
| 58224022 | 732/40.22-22mm RING INSERT TOOL 14 X 18 | 1 | |
| 58224024 | 732/40.24-24mm RING INSERT TOOL 14 X 18 | 1 | |
| 58224027 | 732/40.27-27mm RING INSERT TOOL 14 X 18 | 1 | |
| 58224028 | 732/40 28-28mm RING INSERT TOOL 14 X 18 | 1 | |
| 58224030 | 732/40.30-30mm RING INSERT TOOL 14 X 18 | 1 | |
| 58224032 | 732/40.32-32mm RING INSERT TOOL 14 X 18 | 1 | |
| 58224034 | 732/40.34-34mm RING INSERT TOOL 14 X 18 | 1 | |
| 58224036 | 732/40.36-36mm RING INSERT TOOL 14 X 18 | 1 | |
| 58224041 | 732/40.41-41mm RING INSERT TOOL 14 X 18 | 1 | |
| 58228024 | 732/80.24-24mm RING SHELL TOOL | 1 | |
| 58228027 | 732/80.27-27mm RING SHELL TOOL | 1 | |
| 58228030 | 732/80.30-30mm RING SHELL TOOL | 1 | |
| 58228032 | 732/80.32-32mm RING SHELL TOOL | 1 | |
| 58228034 | 732/80.34-34mm RING SHELL TOOL | 1 | |
| 58228036 | 732/80.36-36mm RING SHELL TOOL | 1 | |
| 58228041 | 732/80.41-41mm RING SHELL TOOL | 1 | |
| 58228046 | 732/80.46-46mm RING SHELL TOOL | 1 | |
| 58228050 | 732/80.50-50mm RING SHELL TOOL | 1 | |
| 58228055 | 732/80.55-55mm RING SHELL TOOL | 1 | |
| 58228060 | 732/80.60-60mm RING SHELL TOOL | 1 | |
| 58231010 | 733/10.10-10mm OPENRING INSERT TOOL 9x12 | 1 | |
| 58231011 | 733/10.11-11mm OPENRING INSERT TOOL 9x12 | 1 | |
| 58231012 | 733/10.12-12mm OPENRING INSERT TOOL 9x12 | 1 | |
| 58231013 | 733/10.13-13mm OPENRING INSERT TOOL 9x12 | 1 | |
| 58231014 | 733/10.14-14mm OPENRING INSERT TOOL 9x12 | 1 | |
| 58231016 | 733/10.16-16mm OPENRING INSERT TOOL 9x12 | 1 | |
| 58231017 | 733/10.17-17mm OPENRING INSERT TOOL 9x12 | 1 | |
| 58231018 | 733/10.18-18mm OPENRING INSERT TOOL 9x12 | 1 | |
| 58231019 | 733/10.19-19mm OPENRING INSERT TOOL 9x12 | 1 | |
| 58231021 | 733/10.21-21mm OPENRING INSERT TOOL 9x12 | 1 | |
| 58231022 | 733/10.22-22mm OPENRING INSERT TOOL 9x12 | 1 | |
| 58231024 | 733/10.24-24mm OPENRING INSERT TOOL 9x12 | 1 | |
| 58291006 | 732TX/10 E 6-TORX RING INSERT TOOLS E6 | 1 | |
| 58291008 | 732TX/10 E 8-TORX RING INSERT TOOLS E8 | 1 | |
| 58291010 | 732TX/10 E 10-TORX RING INSERT TOOLS E10 | 1 | |
| 58291012 | 732TX/10 E 12-TORX RING INSERT TOOLS E12 | 1 | |
| 58291014 | 732TX/10 E 14-TORX RING INSERT TOOLS E14 | 1 | |
| 58294014 | 732TX/40 E 14-TORX RING INSERT TOOLS E14 | 1 | |
| 58294018 | 732TX/40 E 18-TORX RING INSERT TOOLS E18 | 1 | |
| 58294020 | 732TX/40 E 20-TORX RING INSERT TOOLS E20 | 1 | |
| 58294024 | 732TX/40 E 24-TORX RING INSERT TOOLS E24 | 1 | |
| 58620007 | 732G/10.7-RING INSERT TOOLS 9X12 MM 7MM | 1 | |
| 58620008 | 732G/10 8-RING INSERT TOOLS 9X12 MM 8MM | 1 | |
| 58620009 | 732G/10 9-RING INSERT TOOLS 9X12 MM 9MM | 1 | |
| 58620010 | 732G/10.10-RING INSERT TOOLS 9X12 MM 10M | 1 | |
| 58620013 | 732G/10.13-RING INSERT TOOLS 9X12 MM 13M | 1 | |
| 58621016 | 732A/10.1/4-RING INSERT TOOL | 1 | |
| 58621020 | 732A/10.5/16-RING INSERT TOOL | 1 | |
| 58621024 | 732A/10.3/8-RING INSERT TOOL | 1 | |
| 58621028 | 732A/10.7/16-RING INSERT TOOL | 1 | |
| 58621032 | 732A/10.1/2-RING INSERT TOOL | 1 | |
| 58621034 | 732A/10.9/16-RING INSERT TOOL | 1 | |
| 58621036 | 732A/10.5/8-RING INSERT TOOL | 1 | |
| 58621038 | 732A/10.11/16-RING INSERT TOOL | 1 | |
| 58621040 | 732A/10.3/4-RING INSERT TOOL | 1 | |
| 58621042 | 732A/10.13/16-RING INSERT TOOL | 1 | |
| 58621044 | 732A/10.7/8-RING INSERT TOOL | 1 | |
| 58621216 | 732A.G/10.1/4-RING INSERT TOOLS | 1 | |
| 58621220 | 732A.G/10.5/16-RING INSERT TOOL | 1 | |
| 58621224 | 732A.G/10.3/8-RING INSERT TOOL | 1 | |
| 58621228 | 732A.G/10.7/16-RING INSERT TOOL | 1 | |
| 58621232 | 732A.G/10.1/2-RING INSERT TOOL | 1 | |
| 58621234 | 732A.G/10.9/16-RING INSERT TOOL | 1 | |
| 58621236 | 732A.G/10.5/8-RING INSERT TOOLS | 1 | |
| 58624032 | 732A/40.1/2-RING INSERT TOOL | 1 | |
| 58624034 | 732A/40.9/16-RING INSERT TOOL | 1 | |
| 58624036 | 732A/40.5/8-RING INSERT TOOL | 1 | |
| 58624038 | 732A/40.11/16-RING INSERT TOOL | 1 | |
| 58624040 | 732A/40.3/4-RING INSERT TOOL | 1 | |
| 58624042 | 732A/40.13/16-RING INSERT TOOL | 1 | |
| 58624044 | 732A/40.7/8-RING INSERT TOOL | 1 | |
| 58624046 | 732A/40.15/16-RING INSERT TOOL | 1 | |
| 58624048 | 732A/40.1-RING INSERT TOOL | 1 | |
| 58628046 | 732A/80.15/16-INSERT RING DRIVE FOR TORQUE W | 1 | |
| 58628050 | 732A/80.1.1/16-INSERT RING DRIVE FOR TORQUE W | 1 | |
| 58631024 | 733A/10.3/8-OPEN RING INSERT TOOL 9 X 12 M | 1 | |
| 58631028 | 733A/10.7/16-OPEN RING INSERT TOOL 9 X 12MM | 1 | |
| 58631032 | 733A/10.1/2-OPEN RING INSERT TOOL 9 X 12 M | 1 | |
| 69540002 | 69540002-SPARE SPRING FOR WATERPUMP PLI | 1 | |
| 72080103 | 10676-2K-*OBS* TRI-SQ BEARING SCRAPER | 1 | |
| 72083103 | 10676-2K - NEW-TRI-SQ BEARING SCRAPER | 1 | |
| 74140003 | 11068.2-PISTON RING COMPRESSOR SIZE 2 | 1 | |
| 74152002 | 11069.2-PISTON RING PLIERS | 1 | |
| 0319720150 | PIPE, REAR BEARING RECUP, 2ND | 1 | |
| 0322767630 | PIPE,P2.5,RIGHT REAR BEARING | 1 | |
| 369029985 | BUNGEE SPRING COMPRESSION TOOL ROD AND CHANNEL (PIN 369029985) | 1 | |
| 460005832 | 460005832(SPRING EXPANDER (SLEEVE GROUND LOCK)) -A320 | 31 | |
| 460005930 | EXTRACTOR - BEARING PLATE NLG (MV7632-5-32) | 1 | |
| 460005970 | TOOL - DOWNLOCK SPRINGBOX INST. (MV7632-5-15) | 1 | |
| 460006209 | SPHERICAL BEARING LOCATOR - MLG A320NEO | 4 | |
| 460006588 | Torque adaptor trunnion bearing A320 | 6 | |
| 460007256 | SPRING COMPRESSOR - MLG A320NEO | 5 | |
| 537230353 | HPC Rotor Build Stand - Distance RingsLHT Dwg No.(537230353) | 1 | |
| 0620710210 | PIPE, P25 LEFT REAR BEARING | 1 | |
| 38808012371 | O-RING RUBBER 70¡ SHORE 2.62MM X 12.37 ID | 1 | |
| 732/40.21 | 732/40.21-21MM RING INSERT TOOL 14 X 18 | 1 | |
| 732A/10 1/2 | RING END 9X12MM 58621032 | 1 | |
| 732A/10 11/16 | RING END 9X12MM 58621038 | 1 | |
| 732A/10 3/4 | RING END 9X12MM 58621040 | 1 | |
| 732A/10 3/8 | RING END 9X12MM 58621024 | 1 | |
| 732A/10 5/16 | RING END 9X12MM 58621020 | 1 | |
| 732A/10 5/8 | RING END 9X12MM 58621036 | 1 | |
| 732A/10 7/16 | RING INSERT TOOLS 9 X 12 MM 732A/10 7/16 STAHLWILLE 58621028 | 1 | |
| 732A/10 9/16 | RING END 9X12MM 58621034 | 1 | |
| 735-10414 | Measuring Tool B (2 IT) | 1 | |
| 750470706 | O-Ring Seal Qty 2) | 5 | |
| 751587-007 | STRAP - UTILITY (INCLUDED IN J32014, LOWER BEARING SEAL REPLACEMENT EQUIPMENT) | 1 | |
| 762-147 | NOSE WHEEL CENTERING (NEUTRAL)TOOL(HF622722) | 1 | |
| 762-148 | NOSE GEAR STEERING BELLCRANK CENTERING (NEUTRAL)TOOL(HF622723) | 1 | |
| 762-155 | NOSE GEAR DOWNSPRING DISASSEMBLY REASSEMBLT TOOL (SK VB 1152) | 1 | |
| 76413001 | 10613.21-BRAKE SPRING PLIERS | 1 | |
| 77470002 | *OBSOLETE see 77470003* 13120 - FOLDING MEASURING ROD | 1 | |
| 79001401-1 | PISTON OD PACKING SIZING TOOL (USED TO PROTECT PISTON ID PACKINGS DURING INSTALLATION OF ADJUSTER PIN (WILL PERFORM SAME FUNCTION AS PN 2558900-2)) | 1 | |
| 7947479-10 | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 3 | |
| 7947479-10 I | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10 S | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10 Ti | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10/17-4PH | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10/304SS | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 80-3-10 | DE SOLDERING BRAID, SOLDER-WICK, ROSIN, #3 GREEN, STATIC DISSIPATIVE BOBBIN, 2MM X 10FT | 1 | |
| 80360012 | 8036.1-SPRING CLIP 12MM | 1 | |
| 80360018 | 8036.2-SPRING CLIP 18MM | 1 | |
| 80360024 | 8036.3-SPRING CLIP 24MM | 1 | |
| 8087B | POLISHING TOOLS FOR CRANKSHAFTS BEARINGS 2-1/4 TO 2-5/8 | 1 | |
| 80RS24 | BOEING REFERENCE STANDARD. MATERIALS: -3 DETAIL ALUMINUM SKIN 2024-T351, -5 DETAIL ALUMINUM STRINGER 2024-t351, -7 DETAIL ALUMINUM 7075-T6511, -9 DETAIL ALUMINUM 7075-T73 and -11 DETAIL ALUMINUM 7075-T73. Includes Test Report and Certificate of Conformanc | 1 | |
| 80RS25 | BOEING REFERENCE STANDARD. MATERIALS: -3 DETAIL ALUMINUM SKIN 2024-T351, -5 DETAIL ALUMINUM STRINGER 7075-T6511, -7 DETAIL ALUMINUM 7075-T73. FASTENERS: S4932869-6-6 (8 EA. ), S4932869-8-6 (12 EA. ), S4932869-8-7 (16 EA. ). COLLARS: NAS 1080-06 (8 EA... | 1 | |
| 82-0-7595-11 | SOUTHCO RING TOOL 82-0-7595-11 | 2 | |
| 83-262 | SPRING CLAMP 2"OPENING 6"LONG | 2 | |
| 830006-806-00671 | BEARING REMOVER (369D25419)(369D25420) | 1 | |
| 830006-806-00674 | BEARING SEPARATOR 369D25418 T BEARING | 1 | |
| 830006-806-00675 | BEARING REMOVER (369D25419)(369D25420) | 1 | |
| 83220001-001-138 | PROTRACTOR-NLG STEERING ANGLE Q series 100,200,300 | 1 | |
| 833978-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 833978-5 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEAR SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | 1 | |
| 833978-6 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-7 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-9 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 834438-6 | Bearing Holder (2 IT) | 1 | |
| 834443-1 | FAN PULLER (SUPPORTS 3826127-1 SEAL CARRIER DURING REMOVAL OF 3611175-1 SEAL ASSEMBLY SUPERSEDES 294880-1) | 1 | |
| 834447-1 | SEAL REMOVAL FIXTURE (SUPPORTS 3810187-2 BEARING INLET HOUSING ASSEMBLY DURING REMOVAL OF 3611175-1 | 1 | |
| 834731-1 | CENTERING FIXTURE , 1ST & 2ND STAGE IMP | 1 | |
| 836-667 | Soldering Iron Mini 2000 WM20L | 1 | |
| 839C1-5 | HOLLOW END EZ BUCK FLARING SET 5/32" D | 2 | |
| 839C1-7 | HOLLOW END EZ BUCK FLARING SET 7/32" D | 2 | |
| 84995A54 | SPRING PLUNGER M12X32 TOTAL LENGHT STEEL NOSE | 1 | |
| 856A 2395G01 | SECTOR CENTERING LPT STAGE 2/INNER STATIONARY AIR SEAL | 1 | |
| 856A1130G07 | TOOL SET - JACKSCREWS (JACKSCREWS) 12 856A1136 ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTI | 8 | |
| 856A1480G01 | SPL-2178-UNIT-ENGINE, PRESERVATION/ FALSE METERING VALVE SIGNAL | 13 | |
| 856A2304G02 | ADAPTER TOOL SET, LIFT AND TURN - NO. 1 AND 2 BEARING SUPPORT (LIFT AND TURN ADAPTER) | 2 | |
| 856A2308G02 | S7-856A2308G02-ALT SLEEVE, CENTERING AND REM/INST - MOD | 9 | |
| 856A2332G04 | HEATING RING - FAN FRAME/N°1 & N°2 BRG | 1 | |
| 856A2332G05 | HEATING RING - FAN FRAME/N°1 & N°2 BRG | 1 | |
| 856A2332G06 | HEATING RING - FAN FRAME/N°1 & N°2 BRG | 1 | |
| 856A2333G01 | Pins Guide No 1&2 Bearing | 1 | |
| 856A2335 | STOOL, ASSY/DISASSY - NO. 1 AND 2 BEARING SUPPORT (STOOL) | 1 | |
| 856A2335G010 | STOOL, ASSY/DISASSY - NO. 1 AND 2 BEARING SUPPORT (STOOL) | 1 | |
| 856A2335G02 | Stool Assembly/Dissassembly #1&2 Bearing | 6 | |
| 856A2341G00 | NO 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A2341G03 | FIXTURE, PULLER/PRESS - NO. 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A2395G01 | SECTOR CENTERING LPT STAGE 2/INNER STATIONARY AIR SEAL | 1 | |
| 856A2412G01 | SET HALF RING HOLDER S7-856A2412G01-ALT | 6 | |
| 856A2571 | PINS, GUIDE - NO.1 AND NO.2 BEARING SUPPORT MODULE | 1 | |
| 856A2571G02 | PINS, GUIDE - NO. 1 AND NO. 2 BEARING SUPPORT | 8 | |
| 856A2616G01 | SECTOR # CENTERING-LPT SHAFT FWD SEAL(TO CENTER LPT SHAFT RELATIVE TO FAN FRAME DURING NO. 1 AND NO. 2 BEARING SUPPORT MODULE REMOVAL/INSTALLATION) | 5 | |
| 856A2663G01 | PULLER - ADAPTER, SPLITTER FAIRING (SPL-2252) | 23 | |
| 856A2690 | FIXTURE ALIGNMENT NO1 AND NO2 BEARING MODULE | 1 | |
| 856A2690G01 | FIXTURE ALIGNMENT NO1 AND NO2 BEARING MODULE | 4 | |
| 856A2720P49 | 856A2720P49 FAH22 - PROTECTION COVER THE FAN FRAME DURING THE ABRADABLE REPAIR, (POLISHING OPERATION) | 1 | |
| 856A2754G01 | PINS, GUIDE - NO. 1 AND NO. 2 BEARING TUBES (GUIDE PINS) | 11 | |
| 856A2909G01 | PINS, GUIDE - NO. 1 AND NO. 2 BEARING TUBES (GUIDE PINS) | 3 | |
| 856A2911G01 | WRENCH, NO. 2 BEARING INNER | 8 | |
| 856A2921G01 | Template, Locating - No. 1 and No. 2 Bearings Oil Supply Tubes (locating template) | 7 | |
| 856A2922G01 | HEATER HOUSING BEARING NO.2 | 6 | |
| 856A2924G01 | FIXTURE, CHECKING DIM. V - NO. 1 AND NO. 2 BEARING SUPPORT | 6 | |
| 856A2956G01 | TOOL, ASSISTANCE, FAN BLADE, RETAIN RING MFC 58828 | 16 | |
| 856A3012 | PULLER - NO. 2 BEARING INNER RACE (PULLER) | 1 | |
| 856A3012 G01 | Puller ‐ No. 2 Bearing Inner Race | 1 | |
| 856A3012G01 | PULLER-NO.2 BEARING INNER | 1 | |
| 856A3012G02 | NO. 2 BEARING INNER RACE PULLER | 4 | |
| 856A3012G03 | Puller - No. 2 Bearing Inner Race (puller) | 6 | |
| 856A3267 | ADAPTER, TEST RIG - NO. 1 AND 2 BEARING SUPPORT AIR FLOW CHECK (TEST RIG ADAPTER) | 1 | |
| 856A3267G02 | Adapter, Test Rig - No. 1 and 2 Bearing Support Air Flow Check (test rig adapter) | 10 | |
| 856A3317P02 | SPL-9872 CHECK LEAD - WIRING HARNESS | 5 | |
| 856A3328G01 | TOOL SET, ADAPTER - NO. 1 AND NO. 2 BEARING OIL NOZZLES AIR IMPINGEMENT (ADAPTER TOOL SET) | 6 | |
| 856A3329 G02 | No. 1 And No. 2 Bearing Air Impingement Checks Set | 3 | |
| 856A3329G02 | NO.1 AND NO.2 BEARING AIR IMP | 3 | |
| 856A3492G04 | WRENCH - NIPPLE LINE, NO. 5 BEARING SUPPORT (POST CFMI SB 72-0169/SB 72-0254 AND PRE CFMI SB 72-0676) | 7 | |
| 856A3492G06 | WRENCH - NIPPLE LINE, NO. 5 BEARING SUPPORT (POST CFMI SB 72-0676) | 8 | |
| 856A3510G03 | 1 AND 2 BEARING SUPPORT ADAPTER, LIFT AND TURN - | 1 | |
| 856A3510G04 | 1 AND 2 BEARING SUPPORT ADAPTER, LIFT AND TURN - | 10 | |
| 856A3570 | WRENCH, NO. 2 BEARING INNER | 1 | |
| 856A3570 G01 | Wrench No. 2 Bearing Inner Race Seal Retainer | 9 | |
| 856A3570G01 | WRENCH, NO. 2 BEARING INNER RACE SEAL RETAINER (WRENCH) | 9 | |
| 856A3573 | STOOL ASSY / DISASSY - 1 & 2 BEARING SUPPORT | 1 | |
| 856A3573 G03 | Stool Assy/Disassy ‐ 1 & 2 Bearing Support | 13 | |
| 856A3573G01 | STOOL ASSY / DISASSY - 1 & 2 BEARING SUPPORT | 1 | |
| 856A3573G02 | STOOL ASSY / DISASSY - 1 & 2 BEARING SUPPORT | 1 | |
| 856A3573G03 | STOOL ASSY / DISASSY - 1 & 2 BEARING SUPPORT | 13 | |
| 856A3573G03 | TOOL, ASSY/DISASSY - NO. 1 AND NO. 2 BEARING SUPPORT | 13 | |
| 856A3603G02 | CONTAINER, SHIPPING - NO. 1 AND NO. 2 BEARING SUPPORT MODULE | 1 | |
| 856A3721 | ADAPTER TOOL SET LIFT AND TURN 1 & 2 BEARING SUPPORT | 1 | |
| 856A3721G01 | Adaptor Lift/Turn #1&2 Bearing Support | 1 | |
| 856A3721G02 | ADAPTER TOOL SET LIFT AND TURN 1 & 2 BEARING SUPPORT | 1 | |
| 856A3721G03 | ADAPTER TOOL SET LIFT AND TURN 1 & 2 BEARING SUPPORT | 11 | |
| 856A3721G03 | #1 & #2 BEARING MODULE BRACKETS | 11 | |
| 856A3722G01 | Fixture Install #1-2 Bearing Support | 1 | |
| 856A3739G01 | Fixture Install Oil Nozzle Bearing 2 | 1 | |
| 856A3739G02 | Fixture, Installation - No. 2 Bearing Oil Nozzle (installation fixture) | 3 | |
| 856A3740G01 | Tool, Check NB 2 Bearing | 2 | |
| 856A3755P01 | PROOF INSTALLATION RING - LPT ROTATING AIR SEAL STG 1 & 2 | 6 | |
| 856A3761G01 | HOLDING RING - LPT OUTER STATIONARY AIR SEAL STG2 | 6 | |
| 856A3782G02 | SPL-2325 Wrench - Fan Blade, Retainer Ring, Removal 737-600, -700, -800 | 27 | |
| 856A3783 | FIXTURE CHECKING, NO 1 & NO 2 BEARING SUPPORT | 1 | |
| 856A3783G01 | Fixture, Check Dim 'V' N1&2 Bearing Support | 1 | |
| 856A3783G02 | FIXTURE CHECKING, NO 1 & NO 2 BEARING SUPPORT | 6 | |
| 856A3794G01 | RING, HOLDING 2EACH(TO HOLD THE STAGE 1 OUTER STATIONARY AIR SEAL AND SHROUD SUPPORT ASSEMBLY DURING TRANSPORTATION OF THE LPT) | 9 | |
| 856A3907P01 | RING, PROTECTIVE- FAN DISK P01 AND P02 | 2 | |
| 856A3907P02 | RING, PROTECTIVE- FAN DISK P01 AND P02 | 3 | |
| 856A3913G03 | FIXTURE, CHECKING - ASSEMBLY/TRF WITH NO. 5 BEARING SUPPORT (CHECKING FIXTURE) 24 AND 8 HOLES | 6 | |
| 856A3918 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A3918G01 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A3918G02 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 2 | |
| 856A3918G03 | Fixture, Puller/Press - No. 2 Roller Bearing Outer Race (puller/press fixture) | 4 | |
| 856A3919G00 | HEATER, BEARING - NO. 2 (BEARING HEATER) USING ALTERNATE DEWALT HEATER | 1 | |
| 856A3919G01 | HEATER - HOUSING BEARING 2 | 1 | |
| 856A3919G04 | HEATER, BEARING - NO. 2 (BEARING HEATER) | 3 | |
| 856A3919G05 | HEATER, BEARING - NO. 2 (BEARING HEATER) | 4 | |
| 856A3919G06 | Heater, Bearing - No. 2 (No. 2 bearing heater) | 3 | |
| 860000109 | SPRING-SET 16112 | 1 | |
| 8792-10 | GEDORE 027280 10 MM RING END 8792-10, TORQUE WRENC | 1 | |
| 8792-11 | GEDORE 027300 11 MM RING END 8792-11, TORQUE WRENC | 1 | |
| 8792-12 | GEDORE 027320 12 MM RING END 8792-12, TORQUE WRENC | 1 | |
| 8792-13 | GEDORE 027340 13 MM RING END 8792-13, TORQUE WRENC | 1 | |
| 8792-14 | GEDORE 027360 14 MM RING END 8792-14, TORQUE WRENC | 1 | |
| 8792-15 | GEDORE 027380 15 MM RING END 8792-15, TORQUE WRENC | 1 | |
| 8792-16 | GEDORE 027400 16 MM RING END 8792-16, TORQUE WRENC | 1 | |
| 8792-17 | GEDORE 027420 17 MM RING END 8792-17, TORQUE WRENC | 1 | |
| 8792-18 | GEDORE 027440 18 MM RING END 8792-18, TORQUE WRENC | 1 | |
| 8792-19 | GEDORE 027460 19 MM RING END 8792-19, TORQUE WRENC | 1 | |
| 8792-20 | GEDORE 027480 20 MM RING END 8792-20, TORQUE WRENC | 1 | |
| 8792-21 | GEDORE 027500 21 MM RING END 8792-21, TORQUE WRENC | 1 | |
| 8792-22 | GEDORE 027520 22 MM RING END 8792-22, TORQUE WRENC | 1 | |
| 8792-23 | GEDORE 027540 23 MM RING END 8792-23, TORQUE WRENC | 1 | |
| 8792-24 | GEDORE 027560 24 MM RING END 8792-24, TORQUE WRENC | 1 | |
| 880200-5 | RECOMMENDED, MID/WING SHORING & GEAR SWING ONLY TRIPOD JACK (25 TON/22.7 METRIC TON) 2 REQUIRED | 1 | |
| 8818719000 | PERMEABILITY MEASURING - 72-00-43-200-806 | 3 | |
| 88385GT | SPRING, SS, 1/2-EO500-49-4500 | 1 | |
| 895-3130-09-101 | TOOL,KIT,T/R PITCH CHANGE LINK BEARING REPLACEMENT (NSCM A0126) | 1 | |
| 895-3130-13-107 | TOOL KIT,T/R PITCH CHANGE LINK BEARING REPLACEMENT (NSCM A0126) | 1 | |
| 8C2530 | FIXTURE, LIFT AND TURN NO. 2 BEARING HOUSING | 1 | |
| 8C2531 | STAND, ASSEMBLY/DISASSEMBLY NO. 2 BEARING HOUSING | 1 | |
| 8C2532 | FIXTURE, HEAT GUN - NO. 2 BEARING HOUSING | 1 | |
| 8C2540 | FIXTURE, SEATING - NO. 2 BEARING INNER RACE | 1 | |
| 8C2547 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | 1 | |
| 8C2549 | RETAINING TOOL - NO. 2 BEARING BALL | 1 | |
| 8C2551 | INSTALLATION TOOL - NO. 2 BEARING OUTER RACE AND BALL | 1 | |
| 8C3471 | PULLER - MECHANICAL - AGBX - RING MATING - HP1 - HP2 - FP | 1 | |
| 8C3486 | PULLER - MECHANICAL - AGBX - RING MATING - HP2 - CRANK SIDE | 1 | |
| 90-TFBX | Bowers 23° BXR Ring Groove Dia/Width Sett Block | 1 | |
| 91520-1 | POST - SEAT RETURN SPRING 16112 | 7 | |
| 91540-1 | CERTICRIMP 2;SAHT T/SPRING | 1 | |
| 92326-08 | HOISTING RING FOR ENGINE 2 AFTERBODY | 1 | |
| 92384A036 | BALL LOCK PIN 1/4 X 1"1/2 RING HANDLE STAINLESS | 1 | |
| 94125K141 | COMPRES.SPRING 49MMX15MMX 2.2MM | 1 | |
| 94125K711 | Compression Spring Music Wire 18mm Overall 12mm OD 200mm Wire | 1 | |
| 94125K815 | METRIC COMPRESSION SPRING 44.5 LG X 11.25 OD X 1.25 WIRE | 1 | |
| 9429M68 | TOOL SET - INSTL/RMV-HPT ROTOR RETAINING RING - STG 2 | 1 | |
| 9429M68G02 | Tool Set, Instl/Rmv - HPT Rotor Retaining Ring, Stage 2 | 3 | |
| 9446M60P02 | TOOL, INSTALLATION-RETAINING RING STG 2 HPTN | 1 | |
| 94505A564 | Locking Push-Pull Quick-Release Pin Ring Handle 38 Diameter 2 Usable Length | 1 | |
| 9480M17G03 | PULLER, BEARING 2, 4, 7 | 1 | |
| 9486M87G02 | EXTRACTOR - MATING RING (9486M87G02 PART OF KIT 9C1928G02) | 1 | |
| 9486M88G02 | EXTRACTOR - MATING RING (9486M88G02, PART OF KIT 9C1929G02) | 1 | |
| 956A1613G01 | ADAPTER, FUEL METERING UNIT /1/2 | 6 | |
| 956A6006 | FIXTURE, GUIDE - NO.1-2 BEARING SUPPORT | 1 | |
| 956A6010 | FIXTURE - GUIDE - NO. 1-2 BEARING SUPPORT | 1 | |
| 956A6027 | FIXTURE - LIFT & TURN - BEARING SUPPORT 1/2 | 1 | |
| 956A6028 | FIXTURE - LIFT VARIABLE CG - BEARING SPT 1 & 2 | 1 | |
| 956A6030 | FIXTURE - GUIDE - BEARING SPT 1-2 | 1 | |
| 956A6034 | FIXTURE - CHECK - NIPPLE LOCATION - BEARING # 2 | 1 | |
| 956A6158 | TOOL KIT - INSTALL & REMOVAL - BEARING SPT 1 AND 2 (SP) | 1 | |
| 956A6466 | FIXTURE - DISASSY-LPT SEAL RING STAGE 2-3 | 1 | |
| 956A6800 | STAND - SHIPPING - BEARING SUPPORT 1/2 | 1 | |
| 956A6801 | STAND - STORAGE - BEARING SUPPORT 1/2 | 1 | |
| 956A6802 | TABLE FOR SUPPORT BEARING 2 ASSEMBLY | 1 | |
| 956A6803 | FIXTURE, INSTALL/REMOVE-SUPPORT BEARING 2 | 1 | |
| 956A6806 | WRENCH FOR NUT BEARING 2 INNER RACE | 1 | |
| 956A6810 | FIXTURE - LIFT AND TURN - 1 & 2 BEARING SUPPORT | 1 | |
| 956A6811 | FIXTURE, LIFTING - BEARING SUPPORT 1/2 | 1 | |
| 956A6814 | FIXTURE, REMOVE - BEARING 2 INNER RACE | 1 | |
| 956A6818 | FIXTURE - REMOVE - SUPPORT BEARING 2 ASSY | 1 | |
| 956A6821 | FIXTURE, LIFTING - SUPPORT BEARING 2 ASSY | 1 | |
| 956A6825 | GUIDE, INSTALLATION - BEARING 2 | 1 | |
| 956A6826 | DOLLY - STORAGE - BEARING SUPPORT 1/2 | 1 | |
| 956A6827 | FIXTURE - LIFTING - AND TURN - SHAFT - SUPPORT BEARING 2 | 1 | |
| 956A6828 | FIXTURE LEAKAGE TEST - BEARING SUPPORT 1/2 | 1 | |
| 956A6829 | FIXTURE - RETAINING - BEARING 2 INNER RACE | 1 | |
| 956A6832 | FIXTURE - RETAINING - SUPPORT BEARING 2 | 1 | |
| 956A6837 | HEATER - ASSEMBLY - BEARING 2 | 1 | |
| 956A6843 | FIXTURE - POSITIONING BEARING SUPPORT 1/2 | 1 | |
| 956A6844 | PROTECTOR - SHAFT - 1 & 2 BEARING SUPPORT | 1 | |
| 956A6845 | FIXTURE - POSTIONNING - TUBES BEARING SUPPORT 1/2 | 1 | |
| 956A6846 | PROTECTOR - BEARING SUPPORT 1/2 | 1 | |
| 956A6847 | FIXTURE - INSTALL/REMOVE BEARING SUPPORT 1/2 | 1 | |
| 956A6848 | INSTRUMENT - MEASURING BEARING SUPPORT 1/2 | 1 | |
| 956A6849 | FIXTURE - MEASURING BEARING SUPPORT 1/2 | 1 | |
| 956A6985 | FIXTURE - SUPPORT LINE 1-LINE 2 - BEARING TGB | 1 | |
| 956A8002 | FIXTURE - GUIDE - 1-2 BEARING SUPPORT | 1 | |
| 956A8004 | FIXTURE - LIFT AND TURN - BEARING 1/2 | 1 | |
| 956A8006 | FIXTURE - GUIDE - BEARING 1/2 SUPPORT | 1 | |
| 956A8008 | DOLLY - SHROUD STORAGE - BEARING 1/2 | 1 | |
| 956A8025 | FIXTURE - CHECK - NOZZLE - OIL BEARING 2 | 1 | |
| 956A8108 | SET - PIPING TEST FLOW - BEARING SUPPORT 1&2 | 1 | |
| 956A8432 | FIXTURE - DOG-CLUTCHING - RING - SEAL STG 2 | 1 | |
| 956A8460 | CHECK - RING RETAINER - LPT STG 2 & 3 | 1 | |
| 956A8600P101 | RETAINING EXTERNAL RING, 12MM D | 1 | |
| 956A8802 | FIXTURE - ASSY/DISASSY - SUPPORT BEARING 2 | 1 | |
| 956A8803 | FIXTURE - INSTALL/REMOVE- SUPPORT BEARING 2 | 1 | |
| 956A8806 | FIXTURE - TORQUE - BEARING 2 INNER RACE | 1 | |
| 956A8807 | FIXTURE - TORQUE - BEARING 2 OUTER RACE | 1 | |
| 956A8810 | FIXTURE - LIFT AND TURN - 1 & 2 BEARING SUPPORT | 1 | |
| 956A8811 | FIXTURE - LIFTING - 1 & 2 BEARING SUPPORT/FAN & BOOSTER ASSY | 1 | |
| 956A8814 | FIXTURE - REMOVE - BEARING 2 INNER RACE | 1 | |
| 956A8817 | FIXTURE - REMOVE - SUPPORT BEARING 2 ASSY | 1 | |
| 956A8818 | GUIDE - INSTALLATION BEARING 2 OUTER RACE | 1 | |
| 956A8820 | FIXTURE - LIFTING - SUPPORT BEARING 2 ASSY | 1 | |
| 956A8823 | GUIDE - INSTALLATION - BEARING 2 | 1 | |
| 956A8824 | DOLLY - STORAGE - BEARING SUPPORT 1/2 | 1 | |
| 956A8825 | FIXTURE - LIFTING AND TURN - SHAFT / SUPPORT BEARING 2 | 1 | |
| 956A8826 | FIXTURE - LEAKAGE TEST - BEARING SUPPORT 1/2 | 1 | |
| 956A8827 | FIXTURE - RETAINING - BEARING 2 INNER RACE | 1 | |
| 956A8828 | FIXTURE - RETAINING - BEARING 2 OUTER RACE | 1 | |
| 956A8830 | FIXTURE - RETAINING - SUPPORT BEARING 2 | 1 | |
| 956A8833 | GUIDE - INSTALLATION - SUPPORT BEARING 1/ SUPPORT BEARING 2 | 1 | |
| 956A8835 | HEATER - ASSEMBLY - BEARING 2 | 1 | |
| 956A8839 | FIXTURE - POSITIONING - TUBES - 1 & 2 BEARING SUPPORT | 1 | |
| 956A8842 | FIXTURE - REMOVE - SUPPORT BEARING 2 | 1 | |
| 956A8844 | PROTECTOR - SHAFT - 1 & 2 BEARING SUPPORT | 1 | |
| 956A8917 | SET - PUSHER - LINE 1 AND 2 BEARING - TGB | 1 | |
| 956A8919 | SET - PUSHER - LINE 2 BEARING - TGB | 1 | |
| 956A8920 | SET - PUSHER - LINE 2 BEARING - TGB | 1 | |
| 956A8921 | CLAWS - REMOVE - LINE 2 BEARING - TGB | 1 | |
| 956A8924 | SET - PUSHER - LINE 2 BEARING - TGB | 1 | |
| 956A8925 | CLAWS - REMOVE - LINE 2 BEARING - TGB | 1 | |
| 956A8941 | SET - PUSHER - LINE 1 AND 2 BEARING - AGB | 1 | |
| 956A8943 | SET - PULLER - LINE 1 AND 2 BEARING - AGB | 1 | |
| 956A8989 | CLAWS - REMOVE - LINE 2 BEARINGS - AGB | 1 | |
| 956A8991 | CLAWS - REMOVE - LINE 2 BEARING - TGB | 1 | |
| 96404302 | 12161/6 VDE-SET VDE SINGLE-END RING SPANRS | 2 | |
| 96404804 | COMBINATION WRENCH OPEN-RING INCH 20 PES. | 1 | |
| 96410405 | 20/8-DOUBLE ENDED RING SPANNER SETS | 1 | |
| 96410406 | 20/12-DOUBLE ENDED RING SPANNER SETS | 1 | |
| 96410407 | 20/10-RING SPANNER SET METRIC 10PC | 1 | |
| 96410408 | 20/7N.MINI-RING SPANNER SET | 1 | |
| 96410409 | 20/9.MIDI-RING SPANNER SET | 1 | |
| 96410501 | 21/10-DOUBLE ENDED RING SPANNER SETS | 1 | |
| 96410503 | REF: 21/7-DOUBLE ENDED RING SPANNER SETS | 1 | |
| 96410704 | NO:23/8-DOUBLE ENDED RING SPANNER SETS | 1 | |
| 96411301 | 25/7.PC-RATCHET RING SPANNER SET | 1 | |
| 96411302 | 25/4-RATCHET RING SPANNER SET | 1 | |
| 96414402 | 20A/6-RING SPANNER SET | 1 | |
| 96414405 | 20A/10-DE RING SPANNER SETS IMP 10PC | 1 | |
| 96415601 | 25A/7.PC-RATCHET RING SPAN SET IN WALLE | 1 | |
| 9654K257 | EXTENSIONS SPRINGS ¿3/8 X 4"1/2 LG. STEEL ZINC | 1 | |
| 9657K115 | COMPRESSION SPRING 1/2 OD X 0.047 WIRE X 3" LG | 1 | |
| 9657K73 | COMPRESSION SPRING 7/32 OD X .023 WIRE X 1" LONG | 1 | |
| 9666K53 | SPRING STEEL WIRE .125 DIA. | 1 | |
| 96995A120 | LOBE RETAINING RING 0.225 DIA X 0.105 DIA X 0.030 | 1 | |
| 97A27003000002 | SPRING SCALE ASSY (OR 97A27003000005) | 11 | |
| 97A27902016000 | 97A27902016000 SPRING SCALE ASSY | 9 | |
| 97A29102090000 | 97A29102090000 TOOL SET-REMOVAL BOBBINS AND INSTALLATION RINGS | 14 | |
| 97F57508704001 | REPAIR-TOOL,FAIRING 2 | 1 | |
| 9891007004 | JFM ENGINEERING Battery Trickle Charger, 115 to 230/32 VAC, 500 mA, 50/60 Hz, 5 to 35 deg C | 4 | |
| 9899602001 | JFM Engineering 9899602001 SuperMini Aircraft Battery Charger/Analyzer | 5 | |
| 98A10003900000 | MOORING FITTING FR 12 LH | 1 | |
| 98A10003900001 | MOORING FITTING FR 12 RH | 1 | |
| 98A27203250000 | Measuring Equipment Alt: 98A27203250002 MEASURING EQUIP. RUDDER PETAL | 5 | |
| 98A27203250002 | MEASURING EQUIPMENT - RUDDER PEDAL OPERATING LOAD98A27203250002 | 5 | |
| 98A27504003000 | EXTRACTOR-BEARING ASSY-FLAP TRACK2 | 6 | |
| 98A27504030000 | SPANNER - FORWARD BEARING RETAINING RING FLAP TRACK NO.2 | 3 | |
| 98A27504030001 | SPANNER-FWD BEARING RETAINING RING, FLAP TRACK 2 | 3 | |
| 98A27508006000 | REMOVAL/INSTALL.TOOLS SPRING-V.TR.2&4 | 2 | |
| 98A27508006040 | REMOVAL/INSTALL.TOOLS SPRING-V.TR.2 | 1 | |
| 98A27508052000 | FEELER GAGE - FAIL SAFE SPIGOT RING, CARRIAGE 2 | 2 | |
| 98A27508375000 | TOOL - SPRING UNIT, VANE TRACK 2 AND 4 | 1 | |
| 98A27508679000 | REMOVAL/INSTALLATION TOOLS SPRING VANE TRACK 2&4 | 1 | |
| 98A27508679040 | REMOVAL/INSTALLATION TOOLS SPRING VANE TRACK 2 | 1 | |
| 98A29003001000 | Graduated Syringe 0.5 l (0.132 US.gal) | 2 | |
| 98A52007521000 | SPRING 9666K22 | 8 | |
| 98A52007521000REP13 | SPRING 9666K22 | 1 | |
| 98A52108005000 | 98A52108005000 WEAR MEASURING UNIT - PASSENGER/CREW DOOR AND FUSELAGE STOP FITTING | 11 | |
| 98A52208001234 | SPRING ROD (PART OF TOOL SET 98A52208001001) | 1 | |
| 98A54003083000 | REBORING,TOOL-WING AND PYLON FITTING RIB12 | 3 | |
| 98A54003083002 | REBORING TOOL-WING AND PYLON FITTING RIB12 | 2 | |
| 98A54003094000 | CHAMFERING TOOL-WING AND PYLON FITTING RIB12 | 9 | |
| 98A54003500000 | CONE CENTERING RIB12 | 1 | |
| 98A54603005100 | TORQUE,TOOL-RIB23, SPHERICAL BEARINGS | 1 | |
| 98A54603005101 | TORQUE,TOOL-RIB21, SPHERICAL BEARINGS | 1 | |
| 98A54603005102 | TORQUE,TOOL-RIB24, SPHERICAL BEARINGS | 1 | |
| 98A54603005200 | TORQUE,TOOL-RIB20, SPHERICAL BEARINGS | 1 | |
| 98A54603005207 | TORQUE,TOOL-RIB22, SPHERICAL BEARINGS | 1 | |
| 98A55307626200 | MILLING AND CRIMPING DEVICE BEARING 2.3.4 ACTUATOR | 1 | |
| 98A55307626300 | MILLING AND CRIMPING DEVICE BEARING 2.3.4 HINGE | 1 | |
| 98A57304000000 | RING-PROTECTIVE-WING MANHOLES RIBS 2-22 | 1 | |
| 98A57304000001 | RING-PROTECTIVE-WING MANHOLES RIBS 2-22 | 1 | |
| 98A57304000002 | RING-PROTECTIVE-WING MANHOLES RIBS 2-22 | 1 | |
| 98A57304001000 | RING-PROTECTIVE-WING MANHOLES RIBS 2-22 | 1 | |
| 98A57304003000 | RING-PROTECTIVE - WING MANHOLES RIBS 2-29 | 1 | |
| 98A57304005000 | RING-PROTECTIVE - WING MANHOLES RIBS 2-29 | 1 | |
| 98A57304005002 | RING-PROTECTIVE - WING MANHOLES RIBS 2-29 | 1 | |
| 98A57304005004 | RING-PROTECTIVE - WING MANHOLES RIBS 2-29 | 1 | |
| 98D07203000 | MOORING FITTING A320 | 1 | |
| 98D07203000000 | MOORING FITTINGS (A320) | 2 | |
| 98D07203000044 | MOORING FITTING, FRAME 21 (LH) | 7 | |
| 98D07203000045 | MOORING FITTING, FRAME 21 (RH, SYMMETR) | 6 | |
| 98D07203000046 | MOORING FITTING, FRAME 21 (RH, SYMMETR) | 10 | |
| 98D07203000047 | 98D07203000047 MOORING FITTING A320 - FR33 (RH) | 10 | |
| 98D07203000048 | MOORING FITTING, FRAME 62 63 (LH) | 13 | |
| 98D07203000048-ST | MOORING FITTING FRAME 62-63 (LH) | 1 | |
| 98D07203000049 | MOORING FITTING, FRAME 62 63 (RH, SYMMETR) | 14 | |
| 98D07203000049-ST | MOORING FITTING FRAME 62-63 (R) | 1 | |
| 98D07203000050 | MOORING FITTING, FRAME 62 63 (RH, SYMMETR) | 3 | |
| 98D07203000052 | MOORING FITTING A320 - FR15 (LH) | 6 | |
| 98D07203000054 | MOORING FITTING, FRAME 21 LH | 3 | |
| 98D07203000055 | MOORING FITTING, FRAME 21 (LH) | 3 | |
| 98D07203000205 | MOORING FITTING, FRAME 21 (RH, SYMMETR | 1 | |
| 98D07203002000 | SHORING-AT FR42 | 6 | |
| 98D07203002100 | SHORING FR 42 | 9 | |
| 98D07203003000 | SHORING ASSY UNDER FUSELAGE-FR 9-24 TO 56-60 | 1 | |
| 98D07203003042 | SHORING SHORING ASSY BETW EEN FR.24 AND | 3 | |
| 98D07203005001 | V2500 ENGINE CRADLE shoring | 3 | |
| 98D07203011000 | TOOL KIT,SHORING-A321 | 1 | |
| 98D07203016000 | GLOBAL SHORING A320 SERIES A/C | 1 | |
| 98D07203016044 | A320 SHORING KIT | 1 | |
| 98D10203500004 | MOORING KIT-NLG (USED FOR OPT. B727 TOWING BRACKET) | 8 | |
| 98D27504025000 | BEARING HOUSING REMV.2,3,4INBD | 7 | |
| 98D27507541000 | WRENCH - BEARING, FLAP TO CARRIAGE TRACK 2 | 12 | |
| 98D28108293100 | OÕRING 42 X 5 (83 SHORE) | 1 | |
| 98D28108293100REP022 | OÕRING 42 X 5 (83 SHORE) | 1 | |
| 98D32104019000 | 2 SPACER,SPRING ASSY | 6 | |
| 98D57004028000 | HAND PULLER FWD SPIGOT BEARING A320 | 17 | |
| 98D57004033000 | SPANNER R/I BEARING, FLAP TRACK NO.2 AND | 14 | |
| 98D57004038000 | Boring fixture cardan fitting A321/A320/A319/A318 | 9 | |
| 98D57004050000 | SPANNER FLAP TRACK 2 AND 3 BEARING | 5 | |
| 98D57004053 | AIRBUS RETRACT ACT. BORING A320 | 1 | |
| 98D57508627000 | WRENCH - BEARING, TRACK 2-4 | 1 | |
| 98D71203029000 | R/I ENGINE MOUNT BEARING A320 NEO (CALIBRATION) | 2 | |
| 98F07203000002 | SHORING KIT PREMOD 58082 | 1 | |
| 98F07203000003 | SHORING KIT PREMOD 58082 | 1 | |
| 98F07203000004 | SHORING KIT POST MOD 58082 | 1 | |
| 98F07203000005 | SHORING KIT POSTMOD 58082 | 1 | |
| 98F07203000102 | SHORING KIT FITTING FRAME 32/36 | 1 | |
| 98F07203000103 | SHORING KIT FITTING FRAME 32/36 | 1 | |
| 98F07203000134 | SHORING KIT FITTING FRAME 32/36 | 1 | |
| 98F07203000135 | SHORING KIT FITTING FRAME 32/36 | 1 | |
| 98F07203000152 | SHORING FITTING FR20 LH | 1 | |
| 98F07203000153 | SHORING FITTING FR20 RH | 1 | |
| 98F07203001044 | SHORING KIT CRADLE FRAME 26 TO 58 | 2 | |
| 98F07203001046 | SHORING KIT CRADLE FRAME 72 | 2 | |
| 98F07203001048 | SHORING KIT CRADLE FRAME 53.2 | 2 | |
| 98F07203021042 | SHORING FITTING FR12 | 2 | |
| 98F07203021043 | SHORING FITTING FR12 | 3 | |
| 98F07203021044 | SHORING FITTING FR26.1/32/36 | 2 | |
| 98F07203021045 | SHORING FITTING FR26.1/32/36 | 2 | |
| 98F07203021058 | SHORING FITTING FR56.4/5 & 57.1/2 | 1 | |
| 98F07203021059 | SHORING FITTING FR56.4-5 & 57.1-2 | 1 | |
| 98F07203021062 | SHORING FITTING FR20 | 1 | |
| 98F07203021063 | SHORING FITTING FR20 | 1 | |
| 98F27309004000 | Pin - Centering(bm no: 532732104) | 14 | |
| 98F27508002000 | WRENCHES TRUNION BEARING (SET OF 2 WRENCHES) | 5 | |
| 98F54503022000 | CENTERING PIN ENGINE MOUNT GEPN: 98F54503022000 CENTERING PIN ENGINE | 4 | |
| 98F54503024000 | REBORING PYLON RIB12 | 1 | |
| 98F54503024001 | REBORING PYLON RIB12 | 1 | |
| 98F57104002044 | SHORING CRADLE RIB21 LH | 2 | |
| 98L27508613000 | HOIST-REMOVAL INSTALLATION,FIX FAIRING TRACK 2 | 3 | |
| 98L32101006000 | RIGGING TOOL, G2 BEARING BLG | 1 | |
| 98S270050041042 | RING D=24 | 1 | |
| 98S27005004125 | UNSWAGING TOOL FOR BEARING (Ø20,6 NEEDED) | 2 | |
| 98S27005004200 | EXTRACTOR FOR BEARING (Ø20,6 NEEDED) | 1 | |
| 98S27005004303 | SWAGING TOOL FOR BEARING Ø20,6 & Ø22,9 | 1 | |
| 98S32008226000 | SPANNER FOR ATTACH/RGLTN MLG ATR 42 (USED DURING GEAR REPLACEMENT) | 3 | |
| 98S32008226001 | SPANNER FOR ATTACH/RGLTN MLG ATR 42 (USED DURING GEAR REPLACEMENT) | 3 | |
| 98S32008903000 | SPANNER FOR ATTACH/RGLTN MLGATR 72 (USED DURING GEAR REPLACEMENT) | 2 | |
| 98S32008903001 | SPANNER FOR ATTACH/RGLTN MLGATR 72 (USED DURING GEAR REPLACEMENT) | 4 | |
| 98S53003002000 | SHORING FITTINGS LH (FRAME 21-22) | 5 | |
| 98S53003002001 | SHORING FITTINGS LH Ferrures A L� X 9812 -STA | 4 | |
| 98S53003003000 | SHORING FITTINGS LH Ferrures A L� X 9812 -STA | 5 | |
| 98S53003003001 | SHORING FITTINGS LH Ferrures A L� X 9812 -STA | 4 | |
| 98S53003019000 | Shoring Cradle FR42-FR44 | 6 | |
| 98S53003022000 | SHORING FITTING FR28 LH/RH | 4 | |
| 98S5303019000 | SHORING CRADLE FR 42 FR-44 | 1 | |
| 98S53305004-000 | ATR REFERENCE STANDARD PT 5 53-51-01 Figure 501, Page 506 Does not include Stringer Hook. Material: 2024-T3 Aluminum. | 5 | |
| 98S53305004000 | CROWN PAN. FRAME 13 / 23 (BONDED STRINGER) | 5 | |
| 98S53305005-000 | CALIBRATION STANDARD, BONDED WITH FLAT STRINGER ATR72 PT4 53-31-21:PG404 FIG401 | 5 | |
| 98S57003028102 | SWAGING/CUTTING TOOL BEARING NSA 8132-04 | 2 | |
| 98S57003028103 | SWAGING/CUTTING TOOL BEARING NSA-A 2123-07 | 1 | |
| 98S57605001000 | SPRING TAB AILERON RIB27 0° JIG L/H | 7 | |
| 98S57605001001 | SPRING TAB AILERON RIB27 0° JIG R/H | 7 | |
| 99D54403007000 | AIRBUS A318/A319/A320/A321 REFERENCE STANDARD 54-51-80 PART 4 PYLON AFT FIXED FAIRING UPPER SPAR. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F57204103000 | Airbus Guide Ring, A330 PT4 57-20-16:PG413 FIG408 - CAA+PRIMER | 6 | |
| 99L57204066000 | AIRBUS A380 GUIDE RING 53-21-17 FIGURE 011. MATERIAL: BLACK ACETAL. Includes Certificate of Conformance. | 1 | |
| 9C1512 | WRENCH NO.2 BEARING NUT | 1 | |
| 9C1927G01 | EXTRACTOR - MATING RING (9486M86G01 PART OF 9C1927G01) | 1 | |
| 9C1928G01 | EXTRACTOR - MATING RING (9486M87G01 PART OF KIT 9C1928G01 OR 9C1928G02) | 1 | |
| 9C1928G02 | EXTRACTOR - MATING RING (9486M87G01 PART OF KIT 9C1928G019C1928G02) | 1 | |
| 9C1929G01 | EXTRACTOR - MATING RING (9486M88G01 PART OF KIT 9C1929G01) | 1 | |
| 9C1929G02 | EXTRACTOR – MATING RING (9846M88G02) | 1 | |
| 9C2102 | PALLET SUPP, #2 BEARING ASSY | 1 | |
| 9C2104G01 | RETAINING TOOL, NO. 2 BEARING TOOL | 1 | |
| 9C2128G01 | INSTALLATION TOOL, NO. 2 BEARING OUTER RACE AND BALL | 1 | |
| 9C2231 | ADAPTER RING SPOOL 2-5 | 1 | |
| 9C2232G01 | ADAPTER RING STAGE 2-5 SPOOL | 1 | |
| 9C2323G01 | TOOL SET, LOCATION - 1/2 RING ACTG VSV (LOCATION TOOL SET) | 1 | |
| 9C2365 | FIXTURE, HANDLING BEARING ASSEMBLY NO 2 | 1 | |
| 9C2374 | DRIVE HANDLE RING ACTG IGV AND STG 1-2-3 | 1 | |
| 9C2386G01 | PROTECTOR BEARING NO2 | 1 | |
| 9C3067 | SUPERSEDED BY G02FIXTURE, RESTRAINING-NO 3 BEARING, ROTATING SEAL | 1 | |
| 9C3147 | TOOL, INSTALLATION-RETAINING RING, HPT STG 2 NOZZLE AIR TUBE | 1 | |
| A00458 | COMPOUND-SILICONE, COLD CURING SPECIFICATION OMAT 872 | 1 | |
| A0123053 | BEARING EXTRACTOR (LARGE BEAR.) (2IT) | 1 | |
| A0269026 | NORMALISING RING FRENO ATR 72 | 1 | |
| A0269027 | NORMALISING RING FRENO ATR 72 | 1 | |
| A2004-10 | RING(BT)TC/5234-7286 | 1 | |
| A20748 | TYRE REMOVAL RINGS (2 OFF) | 1 | |
| A292514 | HEAD/MAIN BEARING REPLACEMENT RAM TOOL NO. A292514 REPLACEMENT HOSE FOR A292539 HYDRAULIC PUMP KIT | 1 | |
| A310-27-00-00-0284 | SOCKET WRENCH-FWD BEARING, FLAP TRACK 2 | 1 | |
| A320351 | SPL-1825 WRENCH ACTUATOR, NLG STEERING | 17 | |
| A32045-93 | STEERING NUT R/I WRENCH_B777-300_[A32045-93] | 9 | |
| A32099-112 | EQUIPMENT - SPRING EXTENDER (2 EACH) | 9 | |
| A32099-77 | A32099-69 SPRING EXTENDER (SUPERSEDED BY -77) | 1 | |
| A439 | SPLIT RINGS - NICKEL PLATED STEEL SPLIT RING ID 25.00, | 1 | |
| A55007-1 | REMOVAL / INSTALLATION EQUIPMENT - PIVOT BEARING, HORIZONTAL STABILIZER (LINE NUMBER 243 AND ON) | 6 | |
| A685064 | MEASURING-EQUIPMENT, SEMIFUID QTY 2 | 4 | |
| A78021-3 | ROD - SPRING COMPRESSOR (A78021-3 INCLUDED IN A78021-45 AND A78021-46) | 1 | |
| A87-237 | BEARING SHAFT 12 | 1 | |
| AA1969 | SPRING BALANCE OVER 25KG | 1 | |
| AA292579 | SPRING COMPRESSOR TOOL NO. AA292579 FOUR (4) REPLACEMENT HOSES FOR CYLINDER HEAD HYDRAULIC MOUNTING FIXTURE AA293268 | 1 | |
| AB-069 | ELECTRICAL WIRING KIT (A320/A330) | 1 | |
| AB72001-N9H | HAMMER, SLIDING-INLET CONE FAIRINGTBU: AB72001-N9I | 1 | |
| AC116L | AC116L;MAP-Series OPM adaptor 2.5 mm ferrule with LC centering non-locking | 1 | |
| AC21894000-1 | TOOL FOR INSTALLATION OF BEARING CUPS (2IT) | 2 | |
| ACAH1618* | RING SPANNER D/E- 2 - 1/2 X 9/16 | 1 | |
| ACT91339 | 270 PC O RING KIT | 1 | |
| ADS12A | GEDORE 010160 ADS12A - DIAL MEASURING TORQUE WRENC | 1 | |
| ADS12D | GEDORE 010140 ADS12D - DIAL MEASURING TORQUE WRENC | 1 | |
| ADS25F | GEDORE 010200 ADS25F - DIAL MEASURING TORQUE WRENC | 1 | |
| ADS25S | GEDORE 010188 ADS25S - DIAL MEASURING TORQUE WRENC | 1 | |
| ADS40F | GEDORE 010240 ADS40F - DIAL MEASURING TORQUE WRENC | 1 | |
| ADS40S | GEDORE 010228 ADS40S - DIAL MEASURING TORQUE WRENC | 1 | |
| AF- 4120 | LOW FREQUENCY RING PROBE, 10KHZ-100KHZ, REFLECTION, .405"ID, .800"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. USED WITH REFERENCE STANDARD: NDT1102-100 TI | 1 | |
| AF- 4170 | LOW FREQUENCY REFLECTION RING PROBE, .285" ID X .640" 0D TRIAX FISCHER CONNECTOR 500HZ-5KHZ. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AF- 4206 | LOW FREQUENCY REFLECTION RING PROBE, 450HZ-2KHZ, ID 0.415", OD 0.760" (MAX). 1.10" MAX HEIGHT. TRIAX FISCHER CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AF-4006 | LOW FREQUENCY REFLECTION RING PROBE .840"Ø ID 1.205Ø " OD WITH A TRIAX FISCHER CONNECTOR, 900Hz-5KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4015-2.5L/20K | LOW FREQUENCY SPRING LOADED SPOT PROBE, 20KHz, DIFFERENTIAL 2.5" LONG. TRIAX FISCHER C0NNECTOR . Includes test report. | 1 | |
| AF-4015-2.5L/2K | LOW FREQUENCY SPRING LOADED SPOT PROBE, 2KHz, DIFFERENTIAL 2.5" LONG. TRIAX FISCHER C0NNECTOR . Includes test report. | 1 | |
| AF-4015-3L/20K | LOW FREQUENCY SPRING LOADED SPOT PROBE, 20KHz, DIFFERENTIAL 3.0" LONG. TRIAX FISCHER C0NNECTOR . Includes test report. | 1 | |
| AF-4015-3L/25K | LOW FREQUENCY SPRING LOADED SPOT PROBE, DIFFERENTIAL, 25KHz, 3.0" LONG. TRIAX FISCHER C0NNECTOR . Includes test report. | 1 | |
| AF-4032-3 | LOW FREQUENCY REFLECTION RING PROBE, 150HZ-1KHz. (.600" ID) x (1.0" OD) x (1.25" H) TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance | 1 | |
| AF-4036 | LOW FREQUENCY REFLECTION RING PROBE, 200Hz-10KHz SUPPLIED WITH TRIAX FISCHER CONNECTOR. .930"Ø O.D. x .305"Ø I.D. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4037 | LOW FREQUENCY RING PROBE .250"IDX.650" OD REFLECTION TRIAX FISCHER CONNECTOR 500HZ-10KHZ Includes Test Report and Certificate of Conformance | 1 | |
| AF-4038 | LOW FREQUENCY REFLECTION RING PROBE .866"( 22MM ) I.D. 1.250"( 31.7MM ) O.D. SUPPLIED WITH A TRIAX FISCHER CONNECTOR. FREQUENCY RANGE: 100Hz-900Hz. . Includes test report and Certificate of Conformance. | 1 | |
| AF-4040 | LOW FREQUENCY REFLECTION RING PROBE 200Hz- 2KHz, .500"Ø ID x 1.00"Ø DIA OD x 1.160" H, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4049/2K | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-10KHz, .250" Ø ID, .650"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AF-4050 | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-20KHz, .700"Ø O.D. x .350"Ø I.D., 1.050" HIGH x 1.650" LONG SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4062/8M-23M | LF REFLECTION RING PROBE 8..0MM IDX23.0MM OD 30HZ-5KHZ TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AF-4065 | LOW FREQUENCY REFLECTION RING PROBE, TRIAX FISCHER CONNECTOR, 50-500HZ, .600" INSIDE DIAMETER, 1.550" OUTSIDE DIAMETER. B777-200/300 57-20-01 PART 6 PAGE 2. Includes Test Report and Certificate of Conformance... | 1 | |
| AF-4067 | LOW FREQYENCY REFLECTION RING PROBE,500HZ-20KHZ, .365"Ø I.D., .700"Ø O.D. WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4076 | LOW FREQUENCY REFLECTION RING PROBE 1-5KHZ ID.42"Ø, OD.75"Ø x .500"H Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4084 | LOW FREQUENCY REFLECTION RING PROBE, 800HZ-10KHZ, .320"Ø ID,.600"Ø OD x .700"H, WITH TRIAX FISCHER CONNECTOR. REFERENCE: 767 PART 6 53-10-22, NDT6075 REFERENCE STANDARD. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4092 | LOW FREQUENCT RING PROBE, 500Hz-3KHz. REFLECTION, 1.00" OD, .510" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4095 | LOW FREQUENCY RING PROBE, REFLECTION, 100HZ-10KHZ, .500"Ø ID , 1.25"Ø. SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4099 | LOW FREQUENCY RING PROBE, REFLECTION, 100HZ-5KHz .425' I.D., .900" O.D. TRIAX FISCHER CONNECTOR. Includes Test Report and COC. | 1 | |
| AF-4101 | LOW FREQUENCT RING PROBE, 1-10KHz. REFLECTION, .700" OD, .350" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4102 | LOW FREQUENCT RING PROBE, 50Hz-5KHz. REFLECTION, .700" OD, .350" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4103/TF | LOW FREQUENCY REFLECTION RING PROBE ABSOLUTE SHIELDED, 200Hz-100KHz WITH A TRIAX FISCHER CONNECTOR. DIMENSIONS: 37mm X 13mm X 23mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4104 | LOW FREQUENCY REFLECTION RING PROBE .680"Ø I.D. 1.50"Ø O.D. WITH A TRIAX FISCHER CONNECTOR CONNECTOR 100Hz-2KHz., 737 PT 6 57-30-04. Includes test report and Certificate of Conformance. | 1 | |
| AF-4109/TI | LOW FREQUENCY REFLECTION RING PROBE, ID .470, OD.900, 3-10KHZ. For reference standard NDT 3259. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4120 | LOW FREQUENCY RING PROBE, 10KHz-100KHz, REFLECTION, .405"ID, .800"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. USED WITH REFERENCE STANDARD: NDT1102-100 Ti | 1 | |
| AF-4124/300H | REFLECTION RING PROBE TRIAX FISHER CONNECTOR, 1.25"OD .75" ID(19.6mm) 300HZ-1KHZ. 737 PART 6 57-10-53, pg.2, USED WITH REFERENCE STANDARD NDT3168 AND NDT3176-X. Includes test report and Certificate of Conformance. | 1 | |
| AF-4125/100H | CUSTOM REFLECTION RING PROBE1.2"57-10-54 | 1 | |
| AF-4126/500H | LOW FREQUENCY REFLECTION RING PROBE .750"OD, .400"ID 500Hz-2 KHz, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4131/500H | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-1KHz, 1.35"Ø O.D.x.850"Ø I.D. WITH A TRIAX FISCHER CONNECTOR USED ON NDT3178G 737 PART 6 57-10-62, pg.2. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4133 | LOW FREQUENCY RING PROBE, 200Hz-1KHz, REFLECTION, .550"ID, 1.00"OD, .700H SUPPLIED WITH A TRIAX FISCHER. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4138 | LOW FREQUENCY RING PROBE, 1-20KHz, REFLECTION, .700"OD, .300"ID, SUPPLIED WITH A TRIAX CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4145/.248 | LOW FREQUENCY RING PROBE, 30Hz-50KHz, BRIDGE, .248"ID, .875"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4145/.512 | LOW FREQUENCY RING PROBE, 30Hz-50KHz, BRIDGE, .512"ID, 1.125"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4153/TI | LOW FREQUENCY RING PROBE 1-15KHz, REFLECTION, ID.565" OD.910",SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT 3225. | 1 | |
| AF-4155 | LOW FREQUENCY RING PROBE, 50-250Hz, REFLECTION, 1.30"OD, .880"ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4157 | LOW FREQUENCY RING PROBE 200Hz-10KHz, REFLECTION, .880"OD, .505"ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4159 | LOW FREQUENCT RING PROBE, 200Hz-10KHz< REFLECTION, .750"OD, .400"ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4160 | LOW FREQUENCY RELECTION RING PROBE, 200Hz-10KHz, .330" Ø ID .700" ØOD SUPPLIED WITH A TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance | 1 | |
| AF-4165 | LOW FREQUENCY RING PROBE, 100Hz-1KHz, REFLECTION, .820"ID 1.310" OD .975" HEIGHT, SUPPLIED WITH A TRIAX FISCHER..CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4169 | LOW FREQUENCT RING PROBE, 800Hz-3KHz, REFLECTION. .700"OD, .275"ID, SUPPLED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4170 | LOW FREQUENCY REFLECTION RING PROBE, .285" ID x .640" 0D TRIAX FISCHER CONNECTOR 500Hz-5KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4178 | SPRING LOADED LOW FREQUENCY DIFFERENTIAL PROBE, SHIELDED 1-20KHz .375"Ø, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4183 | LOW FREQUENCY RING PROBE 100Hz-8 KHz, .850"Ø(18mm) OD x .400"Ø(7.6mm) ID x., WITH TRIAX FISCHER CONNECTOR. . Includes Test Report and Certificate of Conformance. Reference: USED WITH NDT732A, 777 Part 6 55-17-03 | 1 | |
| AF-4189 | LOW FREQUENCY BRIDGE / DIFFERENTIAL RING PROBE .800"Ø I.D. 1.250"Ø O.D. TRIAX CONNECTOR 100Hz-1KHz. Includes Test Report and Certificate of Conformance. LR0112-B3 | 1 | |
| AF-4190 | LOW FREQUENCY BRIDGE / DIFFERENTIAL RING PROBE .75"Ø I.D. 1.40"Ø O.D. TRIAX CONNECTOR 100Hz-1KHz. Includes test report and Certificate of Conformance. NORTC SPO-1238 (9203394). | 1 | |
| AF-4197 | LOW FREQUENCY RING PROBE, 3-15KHz, REFLECTION, .555"OD, .255"ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4202 | LOW FREQUENCY REFLECTION RING PROBE, 500HZ-5KHZ, ID 0.325", OD 0.790" (MAX). 1.05" HEIGHT. TRIAX FISCHER CONNECTOR. USED WITH NDT6097 REFERENCE STANDARD Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4205 | LOW FREQUENCY REFLECTION RING PROBE, 50HZ-3KHZ, ID 0.500"(12.7mm)Ø, OD 0.690" (17.5mm)Ø. OVERALL HEIGHT = 1.56"(39.5mm) x OVERALL DIAMETER = .787"(20mm) Ø, WITH A TRIAX FISCHER CONNECTOR.Supplie with probe guide Figure 6 27-1-6023. Includes Test Report | 1 | |
| AF-4206 | LOW FREQUENCY REFLECTION RING PROBE, 450HZ-2KHZ, ID 0.415", OD 0.760" (MAX). 1.10" MAX HEIGHT. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4219 | LOW FREQUENCY REFLECTION RING PROBE .420"Ø ID, 1.0"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR 200Hz-10KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4220 | LOW FREQUENCY REFLECTION RING PROBE .312"Ø ID, .790"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR 100Hz-5KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4224 | LOW FREQUENCY REFLECTION RING PROBE .400"Ø ID x .700"Ø OD, TRIAX FISCHER CONNECTOR 200Hz-15KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4235 | LOW FREQUENCY REFLECTION RING PROBE, . 80Hz-50kHz. ID .630", OD 1.42", WITH A HEIGHT 1.30”. SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AF-4246 | LOW FREQUENCY BRIDGE / DIFFERENTIAL RING PROBE .505"Ø I.D. 1.200"Ø O.D. TRIAX CONNECTOR 50Hz-300Hz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4293 | LOW FREQUENCY REFLECTION RING PROBE, 50Hz-3KHz,. .560"Ø ID, 1.25"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| AF-4294 | LOW FREQUENCY RING PROBE. DIFFERENTIAL/BRIDGE, 100Hz-1KHz,. .800"Ø ID, 1.200"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR.. Includes test report and Certificate of Conformance. | 1 | |
| AF-4303 | LOW FREQUENCY REFLECTION RING PROBE, .400"Ø ID with a .650"Ø OD, 500Hz-2KHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4304 | LOW FREQUENCY REFLECTION RING PROBE, .350"Ø ID with a .550"Ø OD, 500Hz-2KHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4312 | LOW FREQUENCY REFLECTION RING PROBE, 2KHz-7KHz .450"Ø ID .800"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| AF-4315 | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-10KHz .425"Ø ID .750"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| AF-4319 | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-10KHz 11.3mmØ ID 20.3mmØ OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| AF-4321 | LOW FREQUENCY REFLECTION RING PROBE, 1KHz -20KHz, .450"Ø ID .800"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AF-4322 | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-5KHz .550" I.D. 1.0" O.D. 1.200"H TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance.....Note: Used with NDT7033 | 1 | |
| AF-4326 | LOW FREQUENCY REFLECTION RING PROBE 200Hz-10KHz, 1.0"Ø OD, .500"Ø ID WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4334 | Low Frequency Reflection Ring Probe, 40Hz-500Hz. 1.3"Ø I.D. 2.0"Ø O.D., supplied with a Triax Fischer Connector. REFERENCE STANDARD: NDT7035. Includes test report and Certificate of Conformance. | 1 | |
| AF-4335 | LOW FREQUENCY REFLECTION RING PROBE, 300Hz-1KHz .425"Ø ID SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance.....USED WITH 717-200 REFERENCE STANDARD P/N: 717RS10-C | 1 | |
| AF-4336 | LOW FREQUENCY REFLECTION RING PROBE, 50KHz-500KHz .250"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| AF-4337 | LOW FREQUENCY REFLECTION RING PROBE .875"ø I.D. 1.250"ø O.D. SUPPLIED WITH A TRIAX FISCHER CONNECTOR. FREQUENCY RANGE: 100Hz-900Hz. . Includes test report and Certificate of Conformance. | 1 | |
| AF-5029/.875 | HIGH FREQUENCY ROTARY PROBE 25-500KHz, REFLECTION, .875"OD, 5.00" WOKRING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5044 | HIGH FREQUENCY RING PROBE 5-30KHz, ABS REFLECTION, 2 COILS, .850" HEIGHT, .700"OD, .260"ID, SUPPLIED WITH A TRIAX FISCHER. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5048G | NDT ENGINEERING CORP. NEC-1062 PROBE GUIDE. Includes Certificate of Conformance. | 1 | |
| AF-5104 | SPECIAL SPRING LOADED SURFACE PROBE, ABSOLUTE COIL 1-3MHz WITH MICRODOT CONNECTOR. PER AIRBUS SPECIFICATION A318/A319/A320/A321 57-20-40-991-002-A. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5254 | Custom Nortec / Pratt & Whittney Eddy Current Probe, 2MHz, Dual "D'" Coil, .2.50mm, 5.6 UH Matching Inductance, Spring Loaded Tip, Differential / Bridge, Match phase angle and frequency as close as possible. Supplied with a Triax Fischer connector. | 1 | |
| AF-5300-.125SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .125"Ø-.156"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.156SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .156"Ø-.187"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.187SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .187"Ø-.250"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.250SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .250"Ø-.312"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.312SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .312"Ø-.375"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.375SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .375"Ø-.437"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.437SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .437"Ø-.500"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-525-7SS | NDT ENGINEERING CORP. / OLYMPUS NDT 5MHz LONGITUDINAL(STRAIGHT BEAM) TRANSDUCER, .25"Ø ELEMENT, .375"Ø CASE, .700" TALL, SIDE MOUNT MICRODOT CONNECTOR. Includes test Report and Certificate of Conformance. | 1 | |
| AFC-525-7T | NDT ENGINEERING CORP. / OLYMPUS NDT 5MHz LONGITUDINAL(STRAIGHT BEAM) TRANSDUCER, .25"Ø ELEMENT, .375"Ø CASE, .700" TALL, TOP MOUNT MICRODOT CONNECTOR. Includes test Report and Certificate of Conformance. | 1 | |
| AFK-5300SE-7 | CUSTOM EDDY CURRENT FLEXIBLE SPRING SHAFT ROTARY PROBE KIT. .125"Ø to .500"Ø. INCLUDES THE FOLLOWING 7 PROBE PART NUMBERS. AF-5300-.125SE/1T-6L, AF-5300-.156SE/1T-6L, AF-5300-.187SE/1T-6L, AF-5300-.250SE/1T-6L, AF-5300-.312SE/1T-6L, AF-5300-.375SE/1T-6L, | 1 | |
| AFK-AUR9 | Scanner Probe kit, ""SUB"" scanner series:9 probes with standard working lengths. Probes "SUB-8-10, SUB-10-12, SUB-12-14, SUB-14-16, SUB-16-18, SUB-18-20, SUB-20-24, SUB-24-28, SUB-28-32. Includes shipping/ transport kit capable of storing scanner cable a | 1 | |
| AFK-RP09 | Custom Eddy Current Low Frequency Ring Probe Kit to include the following part numbers. ARP-1.40-.85-200H, ARP-1.35-.85-500H, ARP-1.25-.77-300H, ARP-1.0-.5-200H, ARP-.80/.40/200H, AF-4022, AF-4035,AF-4068, AF-4081, . Supplied with a waterproof kit box. I | 1 | |
| AFNDT-2146AL | ALUMINUM CHEM MILL MEASURING STEP WEDGE. MATERIAL: 2024-T3 ANODISED ALUMINUM. STEPS: .024, .028, .031, .035, .039, .044, .048, .052, .056, .059 +/-.002". Includes Test eport and Certificate of Conformance. | 1 | |
| AFNDT-2146S | STEEL CHEM MILL MEASURING STEP WEDGE. MATERIAL: 4340 STEEL CHROME COATED. STEPS: .024, .028, .031, .035, .039, .044, .048, .052, .056, .059 +/-.002". Includes Test eport and Certificate of Conformance. | 1 | |
| AFNDT-3280 | Surface reference standard, 4340 Steel, with EDM notch depths of 0.5mm", 1.0" and 2.0mm +/-1.3mm, Notch Width: .18mm Max. Depth: +/- .03mm. Reference standard overall dImensions 25.4mm X 101.6mm X 6.4mm). Includeds .020" thick shim and Key Ring. Supplie | 1 | |
| AFNDT-3290AL | Custom ST Aerospace Engineering Multi-Hole Standard 2 Plate Assembly, Manufactured to the Customer Supplied Drawing Specifications . Material: 7075-T6 Aluminum. 6 Total Hole Sizes to be determined. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3347CS | EDDY CURRENT WELD SURFACE REFERENCE STANDARD. EDM NOTCHES: 0.5mm, 1.0mm, 2.0mm (.1mm (.004") WIDE ± .05mm( .002") MAX WIDTH .152mm (.006"). MATERIAL: 4340 CARBON STEEL. SIZE: 1.0"W x 4.0"L Includeds 4 piece .020" thick shim and Key Ring set. Includes Tes | 1 | |
| AFS-1346 | CUSTOM 2 ELEMENT RING TRANSDUCER FOR BORE HOLE INSPECTION WITH BOEING REFERENCE STANDARD 55-10-13 PAGE 9 FIGURE 2. TWO MICRODOT CONNECTORS "A" and "B" | 1 | |
| AFS-502 | SPECIAL RING TRANSDUCER USED ON 787-9-HS-9, NOTCH "C" & 787-9-HS-2 NOTCH "A" | 1 | |
| AGE-00801-001 | SPRING TAB STOP WRENCH, GSE-202 | 3 | |
| AGE-04261-401 | BREAKOUT BOX - NOSE WHEEL STEERING SYSTEM P/N AGE-04261-401 | 1 | |
| AGE10024 | BEARING DRIVER (2IT) | 3 | |
| AGIT0001 | GAU ARCS REMOVAL/INSTALLATION MATING RING LINES ATS-HP1-FP-HP2 | 1 | |
| AGNRS40115 | REPL JAW & SPRING 1/4-1/2IN | 1 | |
| AGNRS40125 | REPL JAW & SPRING 1/2-3/4IN | 1 | |
| AI-0.125X1.5 | SPRING SLOTTED PIN, 1, P, AI,0.125X1.5 | 1 | |
| AID-01188 | 2ND STAGE PISTON RING | 1 | |
| AK152 | ROLLS ROYCE#AK152, RING SPANNER | 1 | |
| AM-1802 | Shoring cradle engine 1 & 2 | 9 | |
| AM-1803 | Shoring jack engine 1 & 2 | 1 | |
| AM-1804 | Shoring load cell engine 1 & 2 | 1 | |
| AM-1928-156 | ENGINE STAND BASE W/CF6-80C2 ENGINE STAND BEARING | 7 | |
| AM-2811-2011 | STEERING BAR FOR ENGINE STAND PN AM2563200 SN 2097 | 1 | |
| AM20734 | TYRE REMOVAL RINGS (2 OFF) | 1 | |
| AM21478 | TYRE REMOVAL RINGS (2 OFF) | 1 | |
| AM22616 | Tire Removal Rings (2 off) | 1 | |
| APB-NDT5301 | Aviation Partners Boeing 757 Stringer 8 757 Figure 6 57-20-01 PG 15 | 1 | |
| ARD-350T | 3.50MHZ .500"Ø REPLACEABLE DELAY TRANSDUCER WITH .394" LONG DELAY TIP. Includes DRR202 RETAING RING. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP- .80/.40-200HZ | LOW FREQUENCY REFLECTION RING PROBE, 250HZ-650HZ,. 400"Ø ID X .800"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| ARP- 1.0/.50/200H | LOW FREQUENCY REFLECTION RING PROBE .500"Ø ID X 1.0"Ø OD 200HZ-3KHZ WITH A TRIAX FISCHER CONNECTOR. 737 PART 6 57-10-60, PG.2 USED WITH NDT3157. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| ARP- 1.40- .85- 200H | REFLECTION RING PROBE, OUTER DIAMETER 1.40, INNER DIAMETER .85, MAX HEIGHT 1.75, CENTER FREQ 200HZ 100-500HZ | 1 | |
| ARP-.25-.60/100Hz-5khz | LOW FREQUENCY RING PROBE, REFLECTION, 100Hz-5KHZ, 0.250"ID, 0.600"OD, 1.030"H. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.250/1.1-500HZ-5K | Handheld Detachable Probe w/o Cable; Model: RNG = Detachable Ring Probe with Reflection (Driver Pick-up Coils) ; Item Diameter: 0.250in (6.4mm); Tube ID: ; Coil: #= Special; Poly Type: None; Length: No cable; Connector: 1 Pin Female Triaxial Connecto... | 1 | |
| ARP-.255/.650 | DIFFERENTIAL/BRIDGE LOW FREQUENCY RING PROBE, 500HZ-10KHZ, .255"Ø ID, .650"Ø OD WITH TRIAX CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.30/.85 | BRIDGE RING PROBE .300"(0.76 cm) ID .850" (2.16cm) OD 300Hz-5KHz TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.315/.866/4L | LOW FREQUENCY RING PROBE, REFLECTION, 250HZ-40KHZ, 0.315"Ø(8mm) ID, 0.866"Ø(22mm) OD, 1.250"H. 4 WAY LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.315/.866/TF | LOW FREQUENCY RING PROBE, REFLECTION, 250HZ-40KHZ, 0.315"Ø(8mm) ID, 0.866"Ø(22mm) OD, 1.25"H. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.32/.75-100KHZ | LOW FREQUENCY REFLECTION RING PROBE, 10-200KHz.320"Ø ID .750"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.32/.75-1KHZ | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-5KHz.320"Ø ID .750"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.330-.750 | LOW FREQUENCY RING PROBE, REFLECTION, 1-10KHZ TRIAX FISCHER CONNECTOR, .330" INSIDE DIAMETER, .750" OUTSIDE DIAMETER. B777-200/300 PART 6 57-20-03 PAGE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.35/.850-300HZ | LOW FREQUENCY REFLECTION RING PROBE, .35' ID MAX OD .84' 300HZ-2KHZ TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.385/.720 | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-5KHz.385"Ø ID .720"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. FOR REFERENCE STANDARD APB-3302. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.394/.866/4L | LOW FREQUENCY REFLECTION RING PROBE, 250Hz-40KHz.394"Ø ID .866"Ø OD, SUPPLIED WITH A 4 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.4/1.0 | LOW FREQUENCY REFLECTION RING PROBE, 200Hz-10KHz, .400"Ø ID x 1.0"Ø OD x 1.2" HEIGHT. SUPPLIED WITH A TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance | 1 | |
| ARP-.42/.80 | LOW FREQUENCY REFLECTION RING PROBE .42" I.D. .80" O.D. TRIAX FISCHER CONNECTOR 200Hz-1KHz. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.425/.95-200HZ | LOW FREQUENCY RING PROBE, REFLECTION, 200Hz-1KHz. OD: .950". ID:.425".SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| ARP-.5/.8/100HZ-2K | BRIDGE ABSOLUTE SHIELDED RING PROBE .500" ID .800" OD LEMO TRIAX CONNECTOR 100Hz-2KHz. Includes test report and Certificate of Conformance. | 1 | |
| ARP-.5/1.0-200HZ | REFLECTION RING PROBE .500" ID 1.0" OD TRIAX FISCHER CONNECTOR 200Hz-3KHz. 737 PT 6 57-10-60. Includes test report and Certificate of Conformance. | 1 | |
| ARP-.512/1.0 | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-5KHz.512"Ø ID 1.0"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.512/1.142/4L | LOW FREQUENCY RING PROBE, REFLECTION, 80Hz-50KHz, 0.512"Ø(13mm) ID x 1.142"Ø(29mm) OD x 1.250"(25mm) H. SUPPLIED WITH A 4 WAY LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.53-.90 | CUSTOM RING PROBE REFLECTION TRIAX FISHER CONNECTOR,...900"Ø OD x .530"Ø ID .900" TALL, 50Hz-5KHz. Includes Test Report and Certificate of Conformance. 737 PART 6 57-10-62, pg.2.. | 1 | |
| ARP-.54/.88 | LOW FREQUENCY REFLECTION RING PROBE .54" I.D., .88" O.D. TRIAX FISCHER CONNECTOR 100Hz-10KHz. 9216710. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.55/1.0/200HZ | LOW FREQUENCY REFLECTION RING PROBE, 200Hz-5KHz .550" I.D. 1.0" O.D. 1.200"H TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| ARP-.552/1.0 | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-5KHz.552"Ø ID 1.0"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.6-1.25/50Hz-3kHz | LOW FREQUENCY REFLECTION RING PROBE .6" ID 1.25" OD 50Hz-3kHz TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.6-200H-1 | LOW FREQUENCY REFLECTION RING PROBE .255"Ø ID x .600"Ø OD 100Hz-5KHz TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.65/1.1-200HZ | LOW FREQUENCY REFLECTION RING PROBE, 1-200KHz, .650"Ø ID x 1.1"Ø OD x 1.0" HEIGHT. SUPPLIED WITH A TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance | 1 | |
| ARP-.7-2K-1 | LOW FREQUENCY REFLECTION RING PROBE .355"Ø ID x .600"Ø OD 500Hz-20KHz TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.7-2K-5 | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-2KHz .360"Ø ID .700"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.75-1.25/300HZ | REFLECTION RING PROBE, 1.25"57-10-62 | 1 | |
| ARP-.75-1.25/300Hz | REFLECTION RING PROBE, 1.25"OD .75" ID(19.6mm) TRIAX FISHER CONNECTOR 300HZ-1KHZ. REFERENCE STANDARD NDT3176-X 737 PT 6 57-10-59, 737 PART 6 57-10-53 NDT3168. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.75-500H-5 | LOW FREQUENCY REFLECTION RING PROBE, 550Hz-2KHz, .750"Ø OD .405"Ø ID, TRIAX FISCHER CONNECTOR, 100Hz-10KHz.. Includes test report and Certificate of Conformance. | 1 | |
| ARP-.79-.312 | LOW FREQUENCY REFLECTION RING PROBE .312" ID .790" OD 100HZ-5KHZ TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.8-.34-2K | LOW FREQUENCY REFLECTION RING PROBE .312" ID .790" OD 900HZ-5KHZ TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.8-1K | LOW FREQUENCY REFLECTION RING PROBE, 1-20KHz,. 400"Ø ID x .800"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.8-500H-1 | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-5KHz,. 305"Ø ID x .820"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.80/.40-200Hz | LOW FREQUENCY REFLECTION RING PROBE, 250Hz-650Hz,. 400"Ø ID x .800"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.80/.40/200H | LOW FREQUENCY RING PROBE REFLECTION .400" ID .800"OD TRIAX FISCHER CONNECTOR 100HZ-10KHZ . REFERENCE: 737 PART 6 57-10-60, pg.2. USED WITH (NDT3156, 57, 59, 61, 62, 63, 64). Includes test report and Certificate of Conformance. | 1 | |
| ARP-.87/1.40 | LOW FREQUENCY REFLECTION RING PROBE .85" I.D. 1.40" O.D. TRIAX FISCHER CONNECTOR 100Hz-10KHz. 9216710. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.9-100H-5 | LOW FREQUENCY RING PROBE, REFLECTION, 80 Hz-4KHz WITH TRIAX FISCHER CONNECTOR. 737 PART 6 57-10-59, pg.2. 737 PART 6 57-10-58, pg.2. 737 PART 6 57-10-54, pg.2. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.90-.25/500HZ | LOW FREQUENCY REFLECTION RING PROBE 500Hz- 5KHz, .250"Ø ID x .900"Ø DIA OD, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-0510-6/TF | LOW FREQUENCY REFLECTION RING PROBE .525"Ø ID 1.025"Ø OD, TRIAX FISCHER CONNECTOR 200Hz-10KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0-.4/2K | REFLECTION RING PROBE, 2KHz, .400" ID 1.0" OD TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0-.40/100H | REFLECTION RING PROBE 1.00"Ø OD .400"Ø OD, 1.20" HIGH, TRIAX FISCHER CONNECTOR, 100Hz-10KHz.. Includes test report and Certificate of Conformance. RR0410-100H-10K-TF | 1 | |
| ARP-1.0-.42/100H | LOW FREQUENCY REFLECTION RING PROBE 100Hz- 2KHz, .42"Ø ID x 1.0"Ø DIA OD, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0-.55/100H | REFLECTION RING PROBE 1.00"Ø OD .550"Ø OD, 1.20" HIGH, TRIAX FISCHER CONNECTOR, 100Hz-10KHz.. Includes test report and Certificate of Conformance. RR0510-100H-10K-TF | 1 | |
| ARP-1.0-.60-100H | LOW FREQUENCY REFLECTION RING PROBE .60" ID 1.0" OD 100HZ-3KHZ TRIAX FISCHER CONNECTOR 737 PT 6 57-10-55 and 777-200/300 57-20-03 PART 6 PAGE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0/.312/500HZ | LOW FREQUENCY REFLECTION RING PROBE 500Hz- 5KHz, .312"Ø ID x 1.0"Ø DIA OD, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0/.50/200H | LOW FREQUENCY REFLECTION RING PROBE .500"Ø ID x 1.0"Ø OD 200Hz-3KHz WITH A TRIAX FISCHER CONNECTOR. 737 PART 6 57-10-60, pg.2 USED WITH NDT3157. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0/100H-6 | CUSTOM LOW FREQUENCY RING PROBE 100Hz-5KHz REFLECTION WITH TRIAX FISHER CONNECTOR737 PART 6 57-10-55, pg.2 USED WITH NDT3152-X SERIES. Includes test report and Certificate of Conformance... | 1 | |
| ARP-1.00-.55-200H | LOW FREQUENCY REFLECTION RING PROBE, 200Hz-2KHz, .550"Ø ID x 1.00"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.1-.625/100HZ | LOW FREQUENCY RING PROBE, BRIDGE / DIFFERENTIAL, .625"Ø ID 1.1"Ø OD, 100Hz-1KHz WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.2-.6/100H | LOW FREQ. REFLECTION RING PROBE 1.20 | 1 | |
| ARP-1.2/100H-7 | LOW FREQUENCY REFLECTION RING PROBE 1.2" OD, .605" ID, 50Hz-3KHz TRIAX FISHER CONNECTOR. 737 PART 6 57-10-58, pg.2. and 737 PART 6 57-10-54, pg.2 USED WITH NDT3153-X AND 3167-X SERIES REFERENCE STANDARDS. Includes Test Report and Certificate of ... | 1 | |
| ARP-1.25-.62/50Hz | LOW FREQUENCY REFLECTION RING PROBE, 50Hz- 500Hz .620"ID 1.25" OD TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.25-.75-300H | REFLECTION RING PROBE TRIAX FISHER CONNECTOR, 1.25"OD .75" ID(19.6mm) 300HZ-1KHZ. 737 PART 6 57-10-53, pg.2, USED WITH REFERENCE STANDARD NDT3168 AND NDT3176-X. Includes test report and Certificate of Conformance... | 1 | |
| ARP-1.25-.77/300H | LOW FREQUENCY RING PROBE REFLECTION TRIAX FISHER CONNECTOR,1.25"OD(31.8mm) .77" ID(19.6mm) 300HZ-1KHZ. 737 PART 6 57-10-62, pg.2. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.25/.5 | LOW FREQUENCY RING PROBE, BRIDGE / DIFFERENTIAL, .500"Ø ID 1.25"Ø OD, 100Hz-1KHz WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.25/.74/50HZ | LOW FREQUENCY REFLECTION RING PROBE, 50HZ- 1KHZ .74"ID 1.25" OD TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.25/.86/50HZ-3kHZ | LOW FREQUENCY REFLECTION RING PROBE 1.25"Ø OD, .860"Ø ID, 50HZ-3kHZ, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.3-.78-500H | LOW FREQUENCY REFLECTION RING PROBE .780"Ø ID, 1.300"Ø OD WITH A TRIAX FISCHER CONNECTOR, 500Hz-20KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.35-.85-500H | LOW FREQUENCY RING PROBE, REFLECTION 100Hz-1KHz, 1.35" O.D.x.850"I.D. TRIAX FISCHER CONNECTOR USED ON NDT3178G 737 PART 6 57-10-62, pg.2. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.40-.60/80HZ | LOW FREQUENCY REFLECTION RING PROBE .60"Ø I.D. 1.40"Ø O.D. TRIAX CONNECTOR 80Hz-3KHz., 757 PT 6 57-20-03. Includes test report and Certificate of Conformance. | 1 | |
| ARP-1.40-.62 | LOW FREQUENCY RING PROBE, REFLECTION 100Hz-1KHz, 1.40" O.D.x.620"I.D. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.40-.85-200H | REFLECTION RING PROBE, OUTER DIAMETER 1.40, INNER DIAMETER .85, MAX HEIGHT 1.75, CENTER FREQ 200HZ 100-500HZ | 1 | |
| ARP-1.40-.85-200HZ | REFLECTION RING PROBE, OD 1.40, ID .85, MAX HEIGHT 1.75, CENTER FREQ 200HZ 100-500HZ, ALUM. | 1 | |
| ARP-1.50/2.0-100HZ | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-1KHz, 1.50"Ø ID x 2.00"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-31.8M/19.6M-100H | CUSTOM RING PROBE REFLECTION TRIAX FISHER CONNECTOR,1.25"OD(31.8mm) .77" ID(19.6mm) 100HZ-1.5KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-34.3M/21.6M-100H | CUSTOM RING PROBE REFLECTION TRIAX FISHER CONNECTOR,1.35"OD(34.3mm) .77" ID(22.4mm) 100HZ-1.5KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.125 | OLYMPUS NDT / NDT ENGINEERING CORP. ROTARY PROBE FOR RA2000 SCANNER 100KHz-2MHz 4 PIN STEP LEMO, 1/8"(.125") OD, 1.1" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.375/5K | DIFFERENTIAL PROBE, SPRING LOADED..5 -20 KHZ TRIAX FISCHER CONNECTOR | 1 | |
| ASGP1BG | GRN NON-MARRING TRIM TOOL .312 | 1 | |
| ASGP1BO | ORG NON-MARRING TRIM TOOL .312 | 1 | |
| ASGP1BR | RED NON-MARRING TRIM TOOL .312 | 1 | |
| ASGP2BG | GRN NON-MARRING TRIM TOOL .250 | 1 | |
| ASGP2BO | ORG NON-MARRING TRIM TOOL .250 | 1 | |
| ASGP2BR | RED NON-MARRING TRIM TOOL .250 | 1 | |
| ASK4102-10 | TOOLKIT - BEARING SWAGING (bearing MS14102-10) | 2 | |
| ASP-05-112-08-05-C | Stringer Probe5MHz 112 Element | 1 | |
| ASP-05-112-08-05-O | Stringer Probe5MHz 112 Element | 1 | |
| ASP-05-112-08-05-V | Stringer Probe5MHz 112 Element | 1 | |
| ASPL-P2A2360P20/30 | PORTABLE ELECTRONIC PROOF LOADER FOR BEARINGS P2A2360 /P2A2360P20/P2A2360P30 | 1 | |
| AT-607 | Portable Cutter Tool for Bearing BACB10FA07G Functionally equivelant to RKC7125 | 2 | |
| AT120D/NF-IV94N | IPLEX NX TIP ADAPTER INCLUDE O-RING. DIRECTION OF VIEW: DIRECT SCOPE DIAMETER: 4 MM FIELD OF VIEW: 120° DEPTH OF FIELD: 2MM TO 200MM | 1 | |
| AT2016,ET-9 | ET-9, AT2016 TIP,SPRING SHREDDER | 1 | |
| AT2020,ET-8 | ET-8, AT2020 TIP,SPRING SHREDDER | 1 | |
| AT351-20 | NUT RING, SHELL SIZE 20 .112-40UNC SPACED 1.156 SE | 1 | |
| ATB1067 | INSERTION TOOL 20 GAGE FEMALE ROUND CANNON PLUG (WITHOUT SPRING LOCKS). | 3 | |
| ATI-52 | FOOT SQUARING SHEARS, MODEL 52 | 1 | |
| ATI115A | SPRING-BEEHIVE-1/2IN | 1 | |
| ATI313-12 | WASHER BEARING(AST#112725) | 1 | |
| ATI444D8 | MSTOP BEARING 3CF 3/8-24 BELL | 1 | |
| ATI521C | DEBURRING TIP 3/8D- 7/32 SHK | 1 | |
| ATI542 | SPRING TENSION CLAMP-2IN | 2 | |
| ATI542S | SPRING TENSION CLAMP-2IN STEEL | 1 | |
| AW-D23156000 | Steering Lock Pin-A320 | 1 | |
| AZL02339-R00 | TOOLS SET FOR REM/INST SLEEVES/BEARINGS OF THE SPOILERS - A320 | 1 | |
| AZL04543-R00 | TOOLS SET FOR REM/INST SLEEVES/BEARINGS OF THE ELEVATORS - A320 | 1 | |
| AZL1083-R00 | IRON WHEEL RIM 8'' WITH TIRE 4.80/4.00 X 8 AIR CHAMBER BEARING 6205 - DIAMETER 25MM | 1 | |
| B2226-12 | BRONZE BEARING 1"3/8 ID X 1"5/8 OD X 1"1/2 LG | 1 | |
| B737-255 | BYPASS & EXHAUST PLUGS, folding donut ring type, 600-900 models (NG / NexGen), Short Exhaust Nozzle mod, NSN: 1420-01-646-6551, includes storage bag (per engine) (set of 6) | 1 | |
| B748-1692(star) | 2"OD DISC SPRING ZINC PLATED | 1 | |
| BAB890522 | BALL LOCK PIN 5/16 X 2.20 RING HANDLE DOUBLE ACTING | 1 | |
| BACB10X4TM | LOOKING TO FIND A ROLLER STAKING TOOL FOR THE FOLLOWING BEARINGS. THE SPEC FOR THIS IS BAC5435. IF YOU NEED A COPY OF THE SPEC, FEEL FREE TO EMAIL ME. BEARINGS; PN: BACB10X4TMPN: BACB10A203GM2 PLEASE NOTE THIS IS FOR THE MILITARY AND NEEDS TO BE CON | 1 | |
| BAQ‑9746 B— 4 | BEARING 4‑POINT CONTACT BALL, TARGET SIZE 324×500×78 MM | 1 | |
| BAT-15002 | Garland Non-Marring Plastic Mallet - 1-1/2" Face - MADE IN THE USA! | 1 | |
| BAT-15005 | Garland Non-Marring Plastic Mallet - 2-1/2" Face - MADE IN THE USA! | 1 | |
| BAT-4505ST | 5/32" RIVET SQUEEZE FLARING SET | 1 | |
| BAT-DLRB2 | Speed Driver "Dog Leg" Deburrer with 3 Flute Rosebud Deburring Bit - 2 Piece Set | 1 | |
| BC1‑4045 B | BEARING SIZE 324×390×48 MM | 1 | |
| BCIT-150 | TIRE COVERS (no wheelpant faring) (set of 2) | 1 | |
| BCI‑4045 | BEARING SIZE 324&TIMES;390&TIMES;48 MM | 1 | |
| BDS200 | GEDORE 010360 BDS200 - DIAL MEASURING TORQUE WRENC | 1 | |
| BDS80E | GEDORE 010320 BDS80E - DIAL MEASURING TORQUE WRENC | 1 | |
| BOERMLS2122 | 21 X 22 DOUBLE ENDED RING SPAS | 1 | |
| BOERMLS2427 | 24 X 27 DOUBLE ENDED RING SPAS | 1 | |
| BRAKE METERING VALVE TEST UNIT | BRAKE METERING VALVE TEST UNIT, EMB-120 | 1 | |
| BTA-62028PG | PROTECTOR MLG WHEEL HUB & BEARING SEAL 2 PC | 1 | |
| BTA-72023MOD1 | WHEEL & BEARING PROTECTOR SET - (E190-E2 NOSE WHEEL) - COLOUR: YELLOW | 8 | |
| BTA-72023MOD1A | A320 NOSE WHEEL BEARING PROTECTIVE SET | 1 | |
| BTA-72035 | A310 NW WHEEL AND BEARING PROTECTOR SET P.N BTA-72035 / PER SET | 1 | |
| BTA-72331 | WHEEL AND BEARING PROTECTOR SET (A320 NOSE) YELLOW | 3 | |
| BTA-72331-A | ATR 42/72 MAIN WHEEL BEARING PROTECTIVE DET | 3 | |
| BTA-72331A | WHEEL & BEARING PROTECTOR SET ( Q400 & ATR72-500 MLG) | 3 | |
| BTBTA-72023MOD1 | WHEEL AND BEARING PROTECTOR SET (A320 MAIN) YELLOW | 1 | |
| C-25-1 1/2 | C25-1 1/2 MB NEW BALL BEARING PILLOW BLOCK | 1 | |
| C-FOOT-S-RING-1-1/2 | 1-1/2" SPLIT RING CROWS FOOT | 1 | |
| C-FOOT-S-RING-1/2 | 1/2" SPLIT RING CROWS FOOT | 1 | |
| C-FOOT-S-RING-2" | 2" SPLIT RING CROWS FOOT | 1 | |
| C-FOOT-S-RING-2-1/2 | 2-1/2" SPLIT RING CROWS FOOT | 1 | |
| C-FOOT-S-RING-2-1/4 | 2-1/4" SPLIT RING CROWS FOOT | 1 | |
| C-FOOT-S-RING-2-1/8 | 2-1/8" SPLIT RING CROWS FOOT | 1 | |
| C-FOOT-S-RING-2-3/16 | 2-3/16" SPLIT RING CROWS FOOT | 1 | |
| C-FOOT-S-RING-2-3/4 | C-FOOT-S-RING-2-3/4 TOOL | 1 | |
| C-FOOT-S-RING-2-3/8 | C-FOOT-S-RING-2-3/8 TOOL | 1 | |
| C-FOOT-S-RING-2-5/8 | C-FOOT-S-RING-2-5/8 TOOL | 1 | |
| C0048 | C0048 PLATE-AILERON SPRING TAB CHECK(R.H.) (MV7627-5-35) | 1 | |
| C17-200 | BYPASS VENT & EXHAUST PLUGS, donut ring folding type (set of 12) | 1 | |
| C20195162 | WHEEL AND BEARING PROTECTOR SET (A320 MAIN) YELLOW | 3 | |
| C27-PS-1000 | C27-PS-1000 DESOUTTER STRAIGHT DEBURRING WITH COLLET 4.8MM | 1 | |
| C27045-9-CM | 0020THK SPRING BRASS | 1 | |
| C27086-1 | SPRING REM/INSTL EQUIPMENT (C27086-1) | 13 | |
| C27086-27 | SPRING REM/INSTL EQUIPMENT (SPL-13742) | 8 | |
| C2753 | HYBRID POLYMER SPRING REWIND 15MX1/2" | 1 | |
| C32014-1 | C32014-1 - SPRING EXTENDER - DOWNLOCK, NOSE AND MAIN LANDING GEAR | 21 | |
| C32016-7 | RING SEAL STUFFERS 2ea | 4 | |
| C32017-47 | O-RING, LOWER SEAL EQUIPMENT, MLG (C32017-47 PART OF KIT C32017-53) | 2 | |
| C32020-1 | EXTENSION BAR - NLG STEERING 1 ALT PN :C32020-15 | 15 | |
| C32020-15 | ADAPTER, EXTENSION BAR - FUNCTIONAL TEST, NLG STEERING (ADAPTS J32052 FOR USE ON 737-NG IN LIEU OF C32020-1) | 9 | |
| C35003-20 | C35003-20 - RETRACTION EQUIPMENT - FIRING PIN, OXYGEN SYSTEM | 10 | |
| C54008-53 | TOOL - REMOVAL/INSTALLATION, ENGINE STRUT AFT FAIRING (SPL-2019) | 8 | |
| C77004-10 | BOX - TEST, AIRBORNE VIBRATION MONITORING (REQUIRED WITH GENERIC - S360N021-101/-102 - AVM MONITOR ONLY) (737-300/400/50 (THE BOEING COMPANY) | 20 | |
| CA172@1 | MOORING-RING 1250 LB | 1 | |
| CA2910 | SPRING DIA MOYEN 12.2 X DIA FIL 2.2 X LGT 48.9 STEEL | 1 | |
| CAT4599−6B | Assembly Bushing − NLG Bearing/Piston Ring 32−21−09 | 1 | |
| CAT5616-12 | 1/2 ROUND RING | 1 | |
| CB-21144332-001 | CB-21144332-001;V.36 DTE/DCE Emulation Ring Indicate Cable 72 Inches Long Y Split 12 Inches | 1 | |
| CB-21144332-002 | CB-21144332-002;V.36 DTE/DCE Emulation Ring Indicate Cable 72 Inches Long Y Split 24 Inches | 1 | |
| CBTS123N1 | MRO EQUIVALENT COLD WOKRING TOOLS FOR 12-3-N | 1 | |
| CJ950 | BEARING SEPARATOR 2-3/8IN | 1 | |
| CJ951 | BEARING SEPARATOR 4-1/2IN | 1 | |
| CL-12-BLPR-2.40 | BALL LOCK PIN ¿3/4 X 2.4ÕÕLG RING HANDLE | 1 | |
| CL-12-KR | CABLE RING 3/4 (19&20MM) | 1 | |
| CL-13-KR | CABLE RING 13/16 (21MM) | 1 | |
| CL-14-KR | CABLE RING 7/8 (22&23 MM) | 1 | |
| CL-17-KR | CABLE RING 1"1/6 (27MM) | 1 | |
| CL-4-BPDR-2.10 | BALL LOCK PIN 1/4 X 2.10 STEEL RING HANDLE | 1 | |
| CL-8-KR | CABLE RING 1/2 (12&13MM) | 1 | |
| CLM-10-BLHR-25-S-C | BALL LOCK PIN 100MM X 25MM RING HANDLE STAINLESS WITH CABLE ASSY | 1 | |
| CLM-12-BLHR-40-S-C | BALL LOCK PIN 12MM X 40MM RING HANDLE STAINLESS WITH CABLE ASSY | 1 | |
| CLM-12-SPS-1 | SPRING PLUNGER M12 X 32mm | 1 | |
| CMST22036RB | 20-IN WIDE 3 DRAWER METAL TOOL BOX WITH BALL-BEARING DRAWERS | 1 | |
| CP-13 | BURR-OFF,DEBURRING TOOL,RANGE .203-.219",SHANK D | 2 | |
| CP-15 | BURR-OFF,DEBURRING TOOL,RANGE .234-.250",SHANK D | 2 | |
| CP30379/8 | HANDLING ADAPTOR - FAN CASE - STRONG RING - RB211-535C & E4 | 2 | |
| CP30501/9 | CRADLE RB211-535 (C/W ALL ENG.TRUNNIONS & STRONG RING HANDL.ADAPTORS) | 2 | |
| CP30508-1 | MOUNTING RING- NOSE COWL PARKING FRAME - RB211-534 | 1 | |
| CP30508/1 | MOUNTING RING- NOSE COWL PARKING FRAME - RB211-534 | 1 | |
| CP30509 | MOUNTING RING- NOSE COWL PARKING FRAME - RB211-534 E4 | 1 | |
| CP30550-1 | HANDLING ADAPTOR REAR SUSPENSION RING FLIGH STAND RB211-535 | 1 | |
| CP30550/1 | HANDLING ADAPTOR REAR SUSPENSION RING FLIGH STAND RB211-535 | 1 | |
| CP30736 | CORE ENGINE WASHING- SPRAY RING - RB211-535 E4 | 1 | |
| CPWA-30489 | Puller - # 2 Bearing Inner Race | 1 | |
| CSPM2.5X14-S | COILED SPRING PIN M2.5 X 14 STEEL | 1 | |
| CT492 | TOOL - MEASURING, SERVICE WEAR TAP - THREAD CHASING, SPARK IGNITER BOSS CHAMBER TAP - THREAD CHASING, DIFFUSER CASE/IGNITER BOSS THREAD CHASING DIE - 1.00-20UNS-3A THREAD CHASING DIE - 0.9375-16NS | 5 | |
| CV-2000 | PROFILOMETER (CONTOUR MEASURING INSTRUMENTS) MITUTOYO MOD. CV-2000 | 1 | |
| D-4000 | FEDERAL DIMENSION AIR GAGE ( WITH SETTING RING ADN AIR PLUG) OR EQUIVALENT 1.1268 SETTING RING 1.1268 AIR PLUG | 1 | |
| D-74953-118000 | IAI-STD-TD RING-5IN-2 NOTCH -STL | 1 | |
| D12240 | METRIC COMP SPRING 11.25 OD X 1.25 WIRE X 93.5 LG | 1 | |
| D12800 | SPRING 58MM FREE LENGTH 2MM WIRE DIA X 27MM OD | 1 | |
| D21582 | EXTRACTOR FOR THE BEARING CUP (2-080) | 1 | |
| D21852 | EXTRACTOR FOR BEARING CUP (2-80) | 5 | |
| D21852-1000 | EXTRACTOR FOR THE BEARING CUP (2-080) | 5 | |
| D231156000 | Steering pin A320 | 1 | |
| D23156000 | A320 STEERING PIN | 34 | |
| D32AXJ00011G01 | 32AXJ00011G01 AXLE JACK 8T, NOSE WHEEL STEERING TESTS | 1 | |
| D42000 | GENERAL CERTIFICATE OF CONFORMITY (WITHOUT SERIAL NUMBERS) NOT REQUIRED WHEN ORDERING D42001 | 1 | |
| D51852-1000 | EXTRACTOR FOR THE BEARING CUP (2-080) | 1 | |
| D9849-15 | DEBURRING TOOL 16-24 | 5 | |
| D9850-14 | DEBURRING TOOL 8-12 | 3 | |
| D9851 | DEBURRING TOOL KIT, SWAGED FITTING (0.250 IN, - 0.375 IN.) | 3 | |
| DG-200 | SPRING SCALE 0-200 LBS | 11 | |
| DLR25 | RETAINING RING FOR .25" DIA | 1 | |
| DMC102 | DMC102 - MIL-T-83507/16-01 Maintenance Kit for Electrical Connectors and Wiring Systems | 2 | |
| DMC1020-1 | DMC1020-1 CASA CN-235 Wiring System Maintenance Kit | 2 | |
| DMC1126 | DMC1126 Wiring System Maintenance Kit for the BAE Jetstream 31/32/41 Aircraft | 2 | |
| DMC1165 | Lear 25, 31A, 35, 55 and 60 Wiring System Maintenance Kit | 2 | |
| DMC1186 | DMC1186 - AF8 (M22520/1-01) Tool Kit for Electrical Connectors and Wiring Systems | 4 | |
| DMC1220 | DMC1220- C-130H Wiring System Maintenance Kit | 4 | |
| DMC123 | DMC123 - MIL-T-83507/8-01 Maintenance Kit for Electrical Connectors and Wiring Systems | 5 | |
| DMC1253 | DMC1253 Gulfstream V G500/G550 Wiring System Maintenance Kit | 5 | |
| DMC1264 | DMC1264 Boeing 737 Next Generation 737-600/-700/-800/-900/BBJ Wiring System Maintenance Kit | 6 | |
| DMC1278 | DMC1278 Embraer ERJ-145 Wiring System Maintenance Kit | 4 | |
| DMC1280 | DMC1280 Airbus H135 (Eurocopter EC135) Maintenance Kit for Electrical Connectors and Wiring Systems | 2 | |
| DMC1293 | DMC1293 Learjet 40/45 Wiring System Maintenance Kit | 4 | |
| DMC1299 | Boeing 737-200 to 800/BBJ/NG Wiring System Maintenance Kit | 2 | |
| DMC1352 | DMC1352 Beechcraft King Air 350 Wiring System Service Kit | 3 | |
| DMC1354 | DMC1354 Bell 412 SP Wiring System Maintenance Kit | 2 | |
| DMC1362MOD1 | DMC1362MOD1 C-130J Wiring System Maintenance Kit | 2 | |
| DMC1362MOD1R | DMC1362MOD1R C-130J Wiring System Maintenance Kit | 2 | |
| DMC1390 | Wiring System Maintenance Kit for the Airbus A320, A333, A340, Bombardier Challenger CL-604, Gulfstream GV, Learjet 60 | 2 | |
| DMC1417 | DMC1417 - Kaman SH-2G Wiring System Maintenance Kit | 2 | |
| DMC1430 | DMC1430 Wiring System Maintenance Kit for the Pilatus PC-12 | 2 | |
| DMC1521 | DMC1521 Embraer E170/E175/E190/E195 Wiring System Maintenance Kit | 8 | |
| DMC1535 | DMC1535 Light Armored Vehicle LAV-25 & LAV-AT Wiring System Maintenance Kit | 2 | |
| DMC1576 | Wiring System Maintenance Kit for the Sikorsky S-92 | 2 | |
| DMC1582B | DMC1582B Stryker IAV (ICV, MGS, RV, MCV-B, CV, FSV, ESV, MEV, ATGM, NBC RV) Wiring System Maintenance Kit | 2 | |
| DMC1589 | DMC1589 Sikorsky S-92 Wiring System Maintenance Kit | 2 | |
| DMC169A | DMC169A - HX4 Tool & Die Sets for Electrical Connectors and Wiring Systems - M83521/7-01 | 2 | |
| DMC189 | DMC189 Wiring System Service Kit for the F-28 Fokker Aircraft | 3 | |
| DMC1924 | DMC1924 - Circular Ring Plier Kit | 2 | |
| DMC1999 | DMC1999 Bombardier C Series/Airbus ACJ220 Wiring System Maintenance Kit | 2 | |
| DMC1999R | DMC1999R Bombardier C Series/Airbus ACJ220 Wiring System Service Kit | 2 | |
| DMC201MOD1 | DMC201MOD1 Boeing 747 & 747SP Wiring System Maintenance Kit | 3 | |
| DMC2022 | DMC2022 Wiring System Service Kit for the Sikorsky CH-60/HH-60M/MH-60R/UH-60M | 1 | |
| DMC2038R | DMC2038R USAF Advanced Wiring Training Kit | 2 | |
| DMC204 | DMC204 Learjet 35 Wiring System Maintenance Kit | 3 | |
| DMC205 | DMC205 Wiring System Maintenance Kit for the Cessna Citation I and II Aircraft | 4 | |
| DMC205-1 | DMC205-1 Cessna Citation I, II, and III Wiring System Maintenance Kit | 4 | |
| DMC2119 | DMC2119 KC-46A Boeing Pegasus Wiring System Service Kit | 2 | |
| DMC2155 | DMC2155 KC-46A Boeing Pegasus Wiring System Maintenance Kit | 2 | |
| DMC2159 | The DMC2159 - Piper Aircraft Wiring System Maintenance Kit | 2 | |
| DMC216 | DMC216 Lockheed F-16 Wiring System Maintenance Kit | 3 | |
| DMC216WP | DMC216WP Wiring System Maintenance Kit for the F-16 Wright-Patterson Version | 2 | |
| DMC2200 | DMC2200 Dassault Falcon Jet 7X/8X Wiring System Maintenance Kit | 2 | |
| DMC2204 | DMC2204 Autosport (TE/Deutsch) Wiring System Maintenance Kit | 2 | |
| DMC2206 | DMC2206 - Bombardier Global 7500 Wiring System Maintenance Kit | 2 | |
| DMC221MOD1 | DMC221MOD1 Wiring System Service Kit for the Boeing 707, 727, 737-200, 747 & 747SP Aircraft | 4 | |
| DMC2267 | Airbus AS350 (B2/B3) Wiring System Maintenance Kit | 2 | |
| DMC2268 | DMC2268 Wiring System Service Kit for Airbus H130 | 2 | |
| DMC2269 | DMC2269 Bell 407GX Wiring System Service Kit | 2 | |
| DMC2271 | DMC2271 Wiring System Service Kit for F-16 Block 70 & All Prior Variants | 2 | |
| DMC2275 | DMC2275 MH-65E Wiring System Maintenance Kit | 2 | |
| DMC2275R | DMC2275R MH-65E Wiring System Service Kit | 2 | |
| DMC2276 | DMC2276 Bell 429 Wiring System Maintenance Kit | 2 | |
| DMC2280 | DMC2280 High Speed Data Wiring System Maintenance Tool Kit | 1 | |
| DMC2323 | DMC2323 Cessna Citation XLS Wiring System Maintenance Kit | 2 | |
| DMC2327 | DMC2327 Wiring System Service Kit for the Cessna 172 Skyhawk | 2 | |
| DMC2329 | DMC2329 Wiring System Service Kit for the Cessna Grand Caravan 208/Grand/Grand EX | 2 | |
| DMC2331 | DMC2331 Cessna 182 Skylane Wiring System Maintenance Kit | 2 | |
| DMC2333 | DMC2333 Cessna Turbo Stationair Wiring System Maintenance Kit | 2 | |
| DMC2335 | Wiring System Maintenance Kit for the Pilatus PC-24 | 2 | |
| DMC239F | DMC239F A-10A/A-10C Wiring System Maintenance Kit | 2 | |
| DMC260 | DMC260 Cessna Citation V Model 560 Wiring System Maintenance Kit | 2 | |
| DMC262 | DMC262 McDonnell Douglas DC8, DC9, DC10 Wiring System Maintenance Kit | 5 | |
| DMC274 | DMC274 AFM8 (M22520/2-01) Tool Kit for Electrical Connectors and Wiring Systems | 4 | |
| DMC283 | DMC283 - AF8 (M22520/1-01) Tool Kit For Electrical Connectors and Wiring Systems | 2 | |
| DMC286-01 | DMC286-01 - General Aviation Maintenance Kit for Electrical Connectors and Wiring Systems | 2 | |
| DMC286-02 | DMC286-02 General Aviation Maintenance Kit for Electrical Connectors and Wiring Systems | 5 | |
| DMC30 | DMC30 Airbus A300, A310, A320, A330, & A340 Wiring System Service Kit | 4 | |
| DMC40 | DMC40 Dassault Falcon 10,100,20,200,50 & 900 Wiring System Maintenance Kit | 2 | |
| DMC441 | DMC441 BELL 206/206L Wiring System Maintenance Kit | 3 | |
| DMC491 | DMC491 Bell 212/412 Wiring System Maintenance Kit | 4 | |
| DMC502 | Wiring System Maintenance Kit for Boeing 757-200/300 | 6 | |
| DMC519 | DMC519 Airbus A318, A319, A320, A321, A330, A340 Wiring System Maintenance Kit | 11 | |
| DMC576 | BAE 125-1000 Wiring System Maintenance Kit | 2 | |
| DMC584 | DMC584- Bombardier CRJ100/200/200 GLS Wiring System Maintenance Kit | 6 | |
| DMC723 | DMC723 Boeing CH-47D Chinook Wiring System Maintenance Kit | 3 | |
| DMC728 | DMC728 BAE Hawk Wiring System Maintenance Kit | 3 | |
| DMC769 | DMC769 - Boeing 737-200, -300, -400, -500 Wiring System Maintenance Kit | 7 | |
| DMC775 | EMB312 TUCANO Wiring System Maintenance Kit | 2 | |
| DMC776 | EMBRAER EMB-120 BRASILIA Wiring System Maintenance Kit | 3 | |
| DMC852 | DMC852- LEARJET 25, 35, & 55 Wiring System Maintanance Kit | 3 | |
| DMC876MOD1 | Wiring System Maintenance Kit for the Hawker 125-800 | 2 | |
| DMC899 | ATR42/ATR72 Wiring System Maintenance Kit | 5 | |
| DMC904 | BOEING 707, 727, 737-100-300, 747, 757, & 767 Wiring System Maintenance Kit | 2 | |
| DMC940 | DMC940 Eurocopter AS332 Super Puma/Airbus H215/SA 330 Puma Wiring System Maintenance Kit | 2 | |
| DPP50 | TESTER SPRING 6635-0-802-8846 | 6 | |
| DPPH | SPRING SCALE, 50 - 250 POUNDS (22.68 - 113.4 KG) | 1 | |
| DPPH-150 | SPRING SCALE NIIN 011210570 | 3 | |
| DPPH20 | SPRING SCALE 0-200 LBS | 1 | |
| DRT69718 | BEARING INSTALLATION TOOL - MLG A320NEO | 1 | |
| DS21 | #21 Spring Drill Stop | 1 | |
| DS27 | #27 Spring Drill Stop | 1 | |
| DS7/32 | 7/32" Spring Drill Stop | 1 | |
| DSNM-21 | #21 "NO-MAR" Spring Drill Stop with Plastic Nose Piece | 1 | |
| DSS2923 | SURFACE SEAL CURING KIT 220V | 2 | |
| DW302SRL | 2 WIRE STRINGLIGHT 100' | 1 | |
| DW310123 | STRINGLIGHT12-3 CORD U PLUG | 1 | |
| DW5000 | 2 WIRE STRINGLIGHT 100' | 1 | |
| DZZ7179-503 | 1.ASSEMBLY - BEARING (DZZ7179-201 INCLUDED INDZZ7179-503) | 1 | |
| E2J65333 | GUIDE TOOL - PISTON RINGS, SEAL CARRIER, RB211-524G/H | 3 | |
| E53-002A | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .031"..Doubler = .040"..Filler = .031"..Stringer = .063" | 1 | |
| E53-002B | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .047"..Doubler = .050"..Filler = .047"..Stringer = .063" | 1 | |
| E53-002C | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .055"..Doubler = .063"..Filler = .055"..Stringer = .063" | 1 | |
| E53-002D | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .071"..Doubler = .080"..Filler = .071"..Stringer = .063" | 1 | |
| E53-002E | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .080"..Doubler = .098"..Filler = .080"..Stringer = .063" | 1 | |
| E53-002F | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .098"..Doubler = .110"..Filler = .098"..Stringer = .063" | 1 | |
| E6072 | COMMUTATOR BEARING EXTRACT (FIGURE 9012) | 1 | |
| E98LGX1BP162LU-VZW | E98LGX1BP162LU-VZW;1x Bypass for Rings - VZW | 1 | |
| EMB-00061-010 | NOSE WHEEL STEERING PROTRACTOR (STEERING CHECK KIT) -EMB-120 (GSE 072) | 2 | |
| EPOCH 650 KNOB LEMO01 | 2) ULTRASONIC FLAW DETECTOR ;MEASURING RANGE: 0.2 TO 26.5 MHZ ;100-240 VAC ;PROTECTION IP 66 - NBR IEC 60529 TP: OLYMPUS EPOCH 650 KNOB LEMO01 | 1 | |
| ERM4X7 | 362003,2 CM4E ELASTIC RING | 1 | |
| F1274472 | STAND TO REMOVE HAIRSPRING (2-100) | 1 | |
| F24-010 | CANOPY COVER, over-top, 24" fwd ext to cover cowl ring gap, gas cap ext. | 1 | |
| F2511353820000 | SPRING FOODTRAY A320 | 1 | |
| F26691000-1 | PISTON CONTER RING ASSEMBLY TOOL F26691000 AMDT A | 6 | |
| F26823000 | TOOL USED TO INSTALL THE BEARING CUPS (1-210) AND (1-490) IN THE INNER AND OUTER HALF-WHEELS (1-500) AND (1-220) | 2 | |
| F26824000 | TOOL USED TO REMOVE THE BEARING CUPS (1-210) AND (1-490) FROM THE INNER AND OUTER HALF-WHEELS | 1 | |
| F26824010 | TOOL USED TO REMOVE THE BEARING CUPS (1-210) AND (1-490) FROM THE INNER AND OUTER HALF-WHEELS | 1 | |
| F27108000 | TOOL USED TO INSTALL/REMOVE THE SPRING IN/FROM THE PISTON. SUPERSEDES R46452. | 2 | |
| F27170000 | TOOL FOR THE INSTALLATION OF THE BACK-UP RINGS (1-270) ON THE PISTONS (1-280) | 2 | |
| F27179000 | TOOL TO INSTALL THE BACK-UP RING (1-420) OF THE PISTON SLEEVE | 1 | |
| F27268000 | BACK-UP RINGS(1-420) INSTALLATION TOOL | 2 | |
| F27272000 | TOOL USED TO REMOVE THE BEARING CUPS(1-260) AND(1-430) FROM THE HALF-WHEELS | 2 | |
| F27531000 | TOOL TO INSTALL BACK-UP RING F27531000 | 3 | |
| F28232000 | BEARING CUP INSTALLATION TOOL MW A320 | 1 | |
| F65-0-3098-29 | Detail 29, Nose Gear Steering Test Fixture | 1 | |
| F65-0-3098-42 | Nose Gear Steering Test Fixture Detail 42 (Compensator Cap) | 1 | |
| F65-0-3311 | ADAPTER - TEST, NOSE WHEEL STEERING METERING VALVE (SPL-5281) | 2 | |
| F71290-1 | Wrench Bearing Retainer Nut 2,5 inch | 12 | |
| F71290-2 | Wrench Bearing Retainer Nut 3,62 inch | 2 | |
| F71313-35 | ROD END BEARING SOCKET WRENCH F71313-52 | 2 | |
| F71313-52 | ROD END BEARING SOCKET WRENCH F71313-52 | 2 | |
| F72735-13 | "GROUND LOCK ASSY - NOSE WHEEL STEERING - 737-200, | 24 | |
| F72942-1 | LUBRICATION SET - ENTRY, CARGO, SERVICE, AND GALLEY DOOR CAMSHAFT BEARINGS 707/727/737 | 24 | |
| F72965 | TETHERING FITTINGS-727 AFT BODY A/P RECOVERY. | 1 | |
| F7XC205706201 | GREASING TOOL FOR 15MM-DIA BEARING (AILERON HINGES 1 2) | 1 | |
| F7XC531211215A1 | BEARING-BORE 062 MASK ME75701Z00- | 1 | |
| F7XC552900072A1 | ELEVATOR CENTERING PIN DIAMETER 12 | 1 | |
| F80096-4 | HOLDING FIXTURE - FWD TRUNNION BEARING HOUSING, M.G. - 737-100/200/300/500 | 10 | |
| F80117-1 | Roller swage assy （bearing 10-60545-205S） | 6 | |
| F80117-10 | Roller swage assy （bearing 10-60545-205S） | 5 | |
| F80158-1 | TRUNNION PIN & BEARING PULLER SET - NOSE GEAR- 737-100/200/300/400/500 | 5 | |
| F80158-17 | TRUNNION PIN & BEARING PULLER SET - NOSE GEAR- 737-100/200/300/400/500 | 20 | |
| F80162-1 | CLAMP SET-NOSE STEERING ACTUATOR ROD (2ea) | 16 | |
| F80169-1 | SPRING EXPANDER SET - 737 MAIN LANDING GEAR - 737-100/200/300/400/500 | 15 | |
| F80169-1 | MLG SPRING EXPANDER SET, SPL-982MLG SPRING EXPANDER SET, SPL-9827 | 15 | |
| F80176-8 | MLG TRUNNION AFT BEARING NUT TORQUE ADAPTER, SPL-9828 | 16 | |
| F80241-1 | Restraint - Tethering, Sta 322.5 Forward Entry And Forward Galley Doors | 1 | |
| F80241-9 | Restraint - Tethering, Sta 322.5 Forward Entry And Forward Galley Doors | 1 | |
| F80251-1 | BEARING EQUIPMENT - GROUND SPOILER ACTUATOR SUPPORT (BOEING 737-100-200) | 1 | |
| FBPT-U25PL | FBPT-U25PL;Tip Univ. 2.5mm Patch Cord for FBP Plastic Inner Ring | 1 | |
| FDI 50 | COM-2529 GAUGE - FORCE, PUSH/PULL/SPRING SCALE, 50 POUND CAPACITY | 1 | |
| FDI50 | COM-2529 GAUGE - FORCE, PUSH/PULL/SPRING SCALE, 50 POUND CAPACITY | 1 | |
| FDIX 50 | COM-2529 GAUGE - FORCE, PUSH/PULL/SPRING SCALE, 50 POUND CAPACITY | 4 | |
| FDIX100 | COM-2529 GAUGE - FORCE, PUSH/PULL/SPRING SCALE, 50 POUND CAPACITY | 6 | |
| FDOO01-35-42000-000 | To align barrel assy and end fitting (9-250) during assembly | 1 | |
| FDS-41331 | FIXTURE (BEARING INSTALLATION) (2IT) | 1 | |
| FDV 50 | COM-2529 GAUGE - FORCE, PUSH/PULL/SPRING SCALE, 50 POUND CAPACITY | 1 | |
| FFL72483777 | DEBURRING SET X2 | 1 | |
| FL 500 | SPRING BALANCE 30 DAN (72 LBF) | 2 | |
| FL500 | SPRING BALANCE 30 DAN (72 LBF) | 2 | |
| FMG4400D | FLASH MEASURING GUN (150 TO 2,300)CD | 9 | |
| FS-1652J | JET BRAND FOOT SHEARS 16 GAUGE 52 SHEARING CAPAC | 1 | |
| F−4333 AT55119 or 63040009−1 | MLG Metering−Pin Retaining Nut− Installation Tool (Goodrich Aerospace 02121) | 1 | |
| F−6430 | MLG Metering−Pin Retaining Nut− Installation Tool (Goodrich Aerospace 02121) | 1 | |
| G20001-1 | BEARING SWAGING - FOREFLAP LEVER (FOR 65B02023-3, -4 OR -6 LEVERS) | 1 | |
| G20001-18 | BEARING SWAGING - FOREFLAP LEVER (FOR 65B02023-9, -10, -12 OR -14 LEVERS) | 2 | |
| G20002-1 | RETAINER - KEYING POST, SPRING LATCH REMOVAL, AMP213408 PLUG MODULE | 1 | |
| G27017-1 | SPL-7132 BAR - RIGGING, FLAP TRACK FAIRING (NO. 1 & 8 DOOR) | 6 | |
| G27036-186 | TOOL - CHECK H-STAB HINGE BEARING FREEPLAY - ALTERNATE PART NUMBER G27036-74 (RENTAL) | 6 | |
| G27099-46 | SPRING PIN, COILED 3/32" X 5/1 | 1 | |
| G32078-1 | SPL-5142 - LOCK ASSEMBLY - NOSE GEAR MOORING/ JACKING FOR 2.24 INCH DIA STEERING PISTON ROD | 6 | |
| G340 | ROMAN RING - 12 TONS | 2 | |
| G600-520003-1 | RESTRAIN - GAS SPRING LOAD CELL (L/H)2 | 1 | |
| G601R200009-1 | BEARING TOOL - , KSC322209B-1, KSC322209B-2 & | 2 | |
| G601R521106−1 | HANDRAIL MEASURING TOOL G601R521106−1 | 1 | |
| G604−324305−1 | TOOL − ROTOR CENTERING GSE 32−43−05 | 3 | |
| GEDORE-010140 | GEDORE 010140 ADS12D - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-010160 | GEDORE 010160 ADS12A - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-010188 | GEDORE 010188 ADS25S - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-010200 | GEDORE 010200 ADS25F - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-010228 | GEDORE 010228 ADS40S - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-010240 | GEDORE 010240 ADS40F - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-010320 | GEDORE 010320 BDS80E - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-010360 | GEDORE 010360 BDS200 - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-027280 | GEDORE 027280 10 MM RING END 8792-10, TORQUE WRENC | 1 | |
| GEDORE-027300 | GEDORE 027300 11 MM RING END 8792-11, TORQUE WRENC | 1 | |
| GEDORE-027320 | GEDORE 027320 12 MM RING END 8792-12, TORQUE WRENC | 1 | |
| GEDORE-027340 | GEDORE 027340 13 MM RING END 8792-13, TORQUE WRENC | 1 | |
| GEDORE-027360 | GEDORE 027360 14 MM RING END 8792-14, TORQUE WRENC | 1 | |
| GEDORE-027380 | GEDORE 027380 15 MM RING END 8792-15, TORQUE WRENC | 1 | |
| GEDORE-027400 | GEDORE 027400 16 MM RING END 8792-16, TORQUE WRENC | 1 | |
| GEDORE-027420 | GEDORE 027420 17 MM RING END 8792-17, TORQUE WRENC | 1 | |
| GEDORE-027440 | GEDORE 027440 18 MM RING END 8792-18, TORQUE WRENC | 1 | |
| GEDORE-027460 | GEDORE 027460 19 MM RING END 8792-19, TORQUE WRENC | 1 | |
| GEDORE-027480 | GEDORE 027480 20 MM RING END 8792-20, TORQUE WRENC | 1 | |
| GEDORE-027500 | GEDORE 027500 21 MM RING END 8792-21, TORQUE WRENC | 1 | |
| GEDORE-027520 | GEDORE 027520 22 MM RING END 8792-22, TORQUE WRENC | 1 | |
| GEDORE-027540 | GEDORE 027540 23 MM RING END 8792-23, TORQUE WRENC | 1 | |
| GEDORE-027560 | GEDORE 027560 24 MM RING END 8792-24, TORQUE WRENC | 1 | |
| GEDORE-027600 | GEDORE 027600 26 MM RING END 8792-26, TORQUE WRENC | 1 | |
| GS18299-1 | USED WITH GS18298 INDICATOR KIT DURING PROPELLER BALANCING | 2 | |
| GS19817-1 | WITH GS20876-1, TO SECURE YOKE DURING DISASSEMBLY AND ASSEMBLY | 3 | |
| GS20879-1 | WITH GS20406-1 DURING BLADE PIN REPLACEMENT | 2 | |
| GS23185-1 | CLOSURE KIT (HAMILTON SUNDSTRAND'S FUEL METERING UNIT MODEL NO. JFC131-4, CMM 73-21-76), | 1 | |
| GS23445-1 | RING KIT (2) | 10 | |
| GSB2753001 | FE278 TRIM SPRING PIN EXTRACTOR | 1 | |
| GSB3251004-IAS | PROTRACTOR-NLG STEERING ANGLE Q series 100,200,300 | 1 | |
| GSB3251005 | ADAPTOR KIT NLG STEERING PROTRACTOR Q100,200,300 | 3 | |
| GSB3251005-IAS | ADAPTOR KIT NLG STEERING PROTRACTOR Q100,200,300 | 1 | |
| GSB3251006-IAS-R1 | PROTRACTOR-NLG STEERING ANGLE Q1,2,3,400 WITH KIT GSB3251005 | 1 | |
| GSB5231001 | TEST FIXTURE P/N: GSB5231001 TO BE USED IN TESTING JXH AFT BAGGAGE DOOR GAS SPRINGS INTEGRITY. | 1 | |
| GSE117-BRJ | STEERING PLATE / 1 M2 STEEL PLATE | 1 | |
| GSE170-LTC52015 | GSE 129 SPRING COMPRESSOR, PASSENGER AND SERVICE DOORS | 3 | |
| GSE2700379 | ELEVATOR ACTUATOR OUTPUT CRANK SECURING TOOL-GSE2700379 | 1 | |
| GSE5100759 | SPRING SCALE, 50 - 250 POUNDS (22.68 - 113.4 KG) | 1 | |
| GT9910014-GT0001-0055 | COMPRESSION TOOL, A220 CARGO DOOR SPRING | 1 | |
| Gedore-010120 | Gedore 010120 ADS8 - Dial Measuring Torque Wrench, Range : 1.6-8.0 N.m / 14-75 lbf.in | 1 | |
| Gedore-010128 | Gedore 010128 ADS8S - Dial Measuring Torque Wrench, Range : 1.6-8.0 N.m / 14-75 lbf.in | 1 | |
| Gedore-010140 | Gedore 010140 ADS12D - Dial Measuring Torque Wrench, Range : 2.4-12 N.m / 24-120 lbf.in | 1 | |
| Gedore-010148 | Gedore 010148 ADS12DS - Dial Measuring Torque Wrench, Range : 2.4-12 N.m / 24-120 lbf.in | 1 | |
| Gedore-010160 | Gedore 010160 ADS12A - Dial Measuring Torque Wrench, Range : 2.4-12 N.m / 24-120 lbf.in | 1 | |
| Gedore-010168 | Gedore 010168 ADS12AS - Dial Measuring Torque Wrench, Range : 2.4-12 N.m / 24-120 lbf.in | 1 | |
| Gedore-010180 | Gedore 010180 ADS25 - Dial Measuring Torque Wrench, Range : 5-25 N.m / 48-240 lbf.in | 1 | |
| Gedore-010188 | Gedore 010188 ADS25S - Dial Measuring Torque Wrench, Range : 5-25 N.m / 48-240 lbf.in | 1 | |
| Gedore-010200 | Gedore 010200 ADS25F - Dial Measuring Torque Wrench, Range : 5-25 N.m / 4-20 lbf.ft | 1 | |
| Gedore-010208 | Gedore 010208 ADS25FS - Dial Measuring Torque Wrench, Range : 5-25 N.m / 4-20 lbf.ft | 1 | |
| Gedore-010220 | Gedore 010220 ADS40 - Dial Measuring Torque Wrench, Range : 8-40 N.m / 72-360 lbf.in | 1 | |
| Gedore-010228 | Gedore 010228 ADS40S - Dial Measuring Torque Wrench, Range : 8-40 N.m / 72-360 lbf.in | 1 | |
| Gedore-010240 | Gedore 010240 ADS40F - Dial Measuring Torque Wrench, Range : 8-40 N.m / 6-30 lbf.ft | 1 | |
| Gedore-010248 | Gedore 010248 ADS40FS - Dial Measuring Torque Wrench, Range : 8-40 N.m / 6-30 lbf.ft | 1 | |
| Gedore-010300 | Gedore 010300 BDS80A - Dial Measuring Torque Wrench, Range : 16-80 N.m / 12-60 lbf.ft | 1 | |
| Gedore-010320 | Gedore 010320 BDS80E - Dial Measuring Torque Wrench, Range : 16-80 N.m / 12-60 lbf.ft | 1 | |
| Gedore-010340 | Gedore 010340 BDS160 - Dial Measuring Torque Wrench, Range : 32-160 N.m / 24-120 lbf.ft | 1 | |
| Gedore-010360 | Gedore 010360 BDS200 - Dial Measuring Torque Wrench, Range : 40-200 N.m / 30-160 lbf.ft | 1 | |
| Gedore-010380 | Gedore 010380 BDS80AS - Dial Measuring Torque Wrench, Range : 16-80 N.m / 12-60 lbf.ft | 1 | |
| Gedore-010400 | Gedore 010400 BDS80ES - Dial Measuring Torque Wrench, Range : 16-80 N.m / 12-60 lbf.ft | 1 | |
| Gedore-010410 | Gedore 010410 BDS100EF - Dial Measuring Torque Wrench, Range : 20-100 N.m / 14-70 lbf.ft | 1 | |
| Gedore-010415 | Gedore 010415 BDS100E - Dial Measuring Torque Wrench, Range : 20-100 N.m / 168-840 lbf.in | 1 | |
| Gedore-010420 | Gedore 010420 BDS160S - Dial Measuring Torque Wrench, Range : 32-160 N.m / 24-120 lbf.ft | 1 | |
| Gedore-010440 | Gedore 010440 BDS200S - Dial Measuring Torque Wrench, Range : 40-200 N.m / 30-160 lbf.ft | 1 | |
| Gedore-010520 | Gedore 010520 CDS400S - Dial Measuring Torque Wrench, Range : 80-400 N.m / 60-300 lbf.ft | 1 | |
| Gedore-010620 | Gedore 010620 DDS800S - Dial Measuring Torque Wrench, Range : 160-800 N.m / 120-600 lbf.ft | 1 | |
| Gedore-010700 | Gedore 010700 EDS1400 - Dial Measuring Torque Wrench, Range : 280-1400 N.m / 200-1000 lbf.ft | 1 | |
| Gedore-010720 | Gedore 010720 EDS2000 - Dial Measuring Torque Wrench, Range : 400-2000 N.m / 300-1500 lbf.ft | 1 | |
| Gedore-012250 | Gedore 012250 3.2mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012255 | Gedore 012255 4mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012260 | Gedore 012260 5mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012265 | Gedore 012265 5.5mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012270 | Gedore 012270 6mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012275 | Gedore 012275 7mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012280 | Gedore 012280 8mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012285 | Gedore 012285 9mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012290 | Gedore 012290 10mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012295 | Gedore 012295 11mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012300 | Gedore 012300 12mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012305 | Gedore 012305 13mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012310 | Gedore 012310 14mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012315 | Gedore 012315 15mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012320 | Gedore 012320 16mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012325 | Gedore 012325 17mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012330 | Gedore 012330 18mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012335 | Gedore 012335 19mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012340 | Gedore 012340 20mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012345 | Gedore 012345 21mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012350 | Gedore 012350 22mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012355 | Gedore 012355 23mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012360 | Gedore 012360 24mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012365 | Gedore 012365 25mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012400 | Gedore 012400 5/32 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012405 | Gedore 012405 3/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012410 | Gedore 012410 7/32 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012415 | Gedore 012415 1/4 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012420 | Gedore 012420 5/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012425 | Gedore 012425 3/8 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012430 | Gedore 012430 7/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012435 | Gedore 012435 1/2 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012440 | Gedore 012440 9/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012445 | Gedore 012445 5/8 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012450 | Gedore 012450 11/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012455 | Gedore 012455 3/4 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012460 | Gedore 012460 13/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012465 | Gedore 012465 7/8 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012470 | Gedore 012470 15/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012475 | Gedore 012475 1in. TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-017500 | Gedore 017500 TT100 FH BLUE - Dial Measuring Torque Screwdriver, Range : 20-100 cN.m / 28-140 ozf.in | 1 | |
| Gedore-017600 | Gedore 017600 TT250 FH BLUE - Dial Measuring Torque Screwdriver, Range : 50-250 cN.m / 4-20 lbf.in | 1 | |
| Gedore-027220 | Gedore 027220 7 mm RING END 8792-07, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027240 | Gedore 027240 8 mm RING END 8792-08, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027260 | Gedore 027260 9 mm RING END 8792-09, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027280 | Gedore 027280 10 mm RING END 8792-10, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027300 | Gedore 027300 11 mm RING END 8792-11, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027320 | Gedore 027320 12 mm RING END 8792-12, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027340 | Gedore 027340 13 mm RING END 8792-13, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027360 | Gedore 027360 14 mm RING END 8792-14, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027380 | Gedore 027380 15 mm RING END 8792-15, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027400 | Gedore 027400 16 mm RING END 8792-16, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027420 | Gedore 027420 17 mm RING END 8792-17, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027440 | Gedore 027440 18 mm RING END 8792-18, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027460 | Gedore 027460 19 mm RING END 8792-19, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027480 | Gedore 027480 20 mm RING END 8792-20, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027500 | Gedore 027500 21 mm RING END 8792-21, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027520 | Gedore 027520 22 mm RING END 8792-22, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027540 | Gedore 027540 23 mm RING END 8792-23, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027560 | Gedore 027560 24 mm RING END 8792-24, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027600 | Gedore 027600 26 mm RING END 8792-26, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027620 | Gedore 027620 27 mm RING 8792-27, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027720 | Gedore 027720 5/16" RING END 8792-5/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027740 | Gedore 027740 3/8" RING END 8792-3/8AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027750 | Gedore 027750 7/16" RING END 8792-7/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027760 | Gedore 027760 1/2" RING END 8792-1/2AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027780 | Gedore 027780 9/16" RING END 8792-9/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027790 | Gedore 027790 5/8" RING END 8792-5/8AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027800 | Gedore 027800 11/16" RING END 8792-11/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027810 | Gedore 027810 3/4" RING END 8792-3/4AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027820 | Gedore 027820 13/16" RING END 8792-13/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027840 | Gedore 027840 7/8" RING END 8792-7/8AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027850 | Gedore 027850 15/16" RING END 8792-15/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027860 | Gedore 027860 1" RING END 8792-1AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027880 | Gedore 027880 1 1/16" RING END 8792-1.1/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027920 | Gedore 027920 1 3/16" RING END, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-7677940 | Gedore 7677940 9x12 RECTANGULAR RING END FITTING A/F 12, Torque Wrench End Fittings | 1 | |
| Gedore-7678080 | Gedore 7678080 9x12 RECTANGULAR RING END FITTING A/F 16, Torque Wrench End Fittings | 1 | |
| Gedore-7678160 | Gedore 7678160 9x12 RECTANGULAR RING END FITTING A/F 18, Torque Wrench End Fittings | 1 | |
| Gedore-7678240 | Gedore 7678240 9x12 RECTANGULAR RING END FITTING A/F 21, Torque Wrench End Fittings | 1 | |
| Gedore-7691340 | Gedore 7691340 9x12 RECTANGULAR RING END FITTING A/F 7, Torque Wrench End Fittings | 1 | |
| Gedore-7691420 | Gedore 7691420 9x12 RECTANGULAR RING END FITTING A/F 8, Torque Wrench End Fittings | 1 | |
| Gedore-7691690 | Gedore 7691690 9x12 RECTANGULAR RING END FITTING A/F 10, Torque Wrench End Fittings | 1 | |
| Gedore-7691770 | Gedore 7691770 9x12 RECTANGULAR RING END FITTING A/F 11, Torque Wrench End Fittings | 1 | |
| Gedore-7691930 | Gedore 7691930 9x12 RECTANGULAR RING END FITTING A/F 13, Torque Wrench End Fittings | 1 | |
| Gedore-7692230 | Gedore 7692230 9x12 RECTANGULAR RING END FITTING A/F 14, Torque Wrench End Fittings | 1 | |
| Gedore-7692580 | Gedore 7692580 9x12 RECTANGULAR RING END FITTING A/F 15, Torque Wrench End Fittings | 1 | |
| Gedore-7692740 | Gedore 7692740 9x12 RECTANGULAR RING END FITTING A/F 17, Torque Wrench End Fittings | 1 | |
| Gedore-7692820 | Gedore 7692820 9x12 RECTANGULAR RING END FITTING A/F 19, Torque Wrench End Fittings | 1 | |
| Gedore-7693040 | Gedore 7693040 9x12RECTANGULAR RING END FITTING A/F 22, Torque Wrench End Fittings | 1 | |
| Gedore-A29010 | Gedore A29010 ADAPTOR RING - 11mm, | 1 | |
| H-1000-A | DUROMETER (SPRING FORCE 0-822G) | 1 | |
| H1670 | JET Equipment & Tools H1670 Piston Ring Compressor Set - 2-78 to 4-38 | 1 | |
| HA-23006778 | C20 2 ½ BEARING GUIDE | 1 | |
| HBL5266C | HUBBELL WIRING DEVICE-KELLEMS HBL5266C Straight Blade Male Plug, 15A, IP20 Rated, 3 Contacts | 1 | |
| HC-2000-012 | ORING: NITRILE,SERIES 2, | 1 | |
| HC-2000-111 | O-RING, SERIES 2 | 1 | |
| HC-2000-138 | O-RING, SERIES 2 | 2 | |
| HC-2000-204 | O-RING, SERIES 2 | 2 | |
| HC-2000-208 | O-RING, SERIES 2 | 2 | |
| HC-2000-210 | O-RING, SERIES 2 | 1 | |
| HC-2000-228 | ORING: NITRILE,SERIES 2, | 1 | |
| HC-2000-232 | ORING: NITRILE,SERIES 2, | 1 | |
| HC-2000-336 | O-RING, SERIES 2 | 3 | |
| HC-2000-350 | ORING: NITRILE,SERIES 2, | 1 | |
| HC-2006-350 | O-RING, SERIES 2 | 3 | |
| HC-2008-109 | ORING: URETHANE,SERIES 2, | 1 | |
| HC-2008-236 | ORING: URETHANE,SERIES 2, | 1 | |
| HC2000-138 | ORING: NITRILE,SERIES 2, | 2 | |
| HC2000-208 | ORING: NITRILE,SERIES 2, | 2 | |
| HC2000-218 | ORING: NITRILE,SERIES 2, | 2 | |
| HC2000-236 | ORING: NITRILE,SERIES 2, | 2 | |
| HC2000-331 | ORING: NITRILE,SERIES 2, | 1 | |
| HC2000-336 | ORING: NITRILE,SERIES 2, | 3 | |
| HC2000-346 | ORING: NITRILE,SERIES 2, | 2 | |
| HC2007-138 | ORING: RUBBER,FLUOROCARBON, SERIES 2 | 1 | |
| HC2007-142 | ORING: RUBBER,FLUOROCARBON, SERIES 2 | 1 | |
| HC2008-109 | ORING: URETHANE,SERIES 2, | 1 | |
| HC535J0235-392 | NO 2 STRINGER | 1 | |
| HCS2044-30-01-120 | HEAT LAMPS, QUARTZ TUBE, 1600W, 120V, 13.33 AMP, METAL STAND WITH CASTERS AND GAS SPRING ARM | 1 | |
| HCU200-FULL-BNC | HCU200-FULL-BNC;HCU200BNC with Full Mactrak Capabilities Including Mactrak Performance Monitoring. Includes AC Adapter | 1 | |
| HCU200-FULL-F | HCU200-FULL-F;HCU200F with Full Mactrak Capabilities Including Mactrak Performance Monitoring. Includes AC Adapter | 1 | |
| HCU200MCMON | HCU200MCMON;MACTRAK PERFORMANCE MONITORING OPTION NEW | 1 | |
| HCU200MCMON-UPG | HCU200MCMON-UPG;HCU200 MACTRAK PERFORMANCE MONITORING OPTION FIELD UPGRADE | 1 | |
| HE64000-1 | GAS SPRING - 250LB | 1 | |
| HH99A-T1 | HANDLE AND PROBE SET, DIGITAL THERMOMETER OMEGA ENGINEERING INC. CAGE CODE: 29907. (MODEL HDX-SET-FSP-T-OST, MODE HH99A-T1) | 1 | |
| HK1212 | NEEDLE BEARING 12ID X 18OD | 1 | |
| HP-6000-40 | H150/200/250 LIFT ADAPTER - B407 - LOW GEAR W/ FAIRING | 1 | |
| HP1460200-7-A | NOSE WHEEL STEERING ACTUATOR OVERHAUL (FOR PRESENT FUGA AL APPLY 3,000 P.S.I. PRESENTING DRIP GREATER THAN 1 DROP FOR EVERY 25 CYCLES) | 1 | |
| HPM-02 | HYCOM HPM-02 RAT TESTER PORTABLE MEASURING INSTRUMENT | 3 | |
| HPM02 | Hycom HPM-02 RAT Tester Portable Measuring Instrument | 3 | |
| HRR683-22 | 1/2 BLUE FORD SPRING LK | 1 | |
| HSA7582 | RING TAB 2IN DOUBLE 5PK | 1 | |
| HSA7585 | RING TAB 5IN QUINT 2PK | 1 | |
| HT-429CA | BELL 429 CARRY ALONG TOWBAR RING HITCH | 3 | |
| HT-8 | BELL 212, 412, UH-1, AH-1 HELICOPTER SKID TOW BAR WITH 2" RING | 1 | |
| HT88 | BAC HT-88 Tow-Bar, 144 in L, Ring, Powder-Coated, Orange, For Bell UH-1, 205, 212, 412 Aircrafts | 4 | |
| HT8R | BAC HT-8R Tow-Bar, 12 ft L, Ring, Powder-Coated, Orange, For Bell 212, 412, UH-1, AH-1 Aircrafts | 2 | |
| HU26664 | BLADE ASSY FIXTURE (RING 6082 ALLY) | 1 | |
| HU28621 | IP/LP Module Transport Stand Ring, bolts to HU28618 | 1 | |
| HU28849 | Installer - Turbine Shaft Ring Nut - RB211-535E4 Engine | 1 | |
| HU35451 | PULLER - NOSE CONE FAIRING REMOVAL, RB211 | 9 | |
| HU40371 | THIMBLE FIT O RING TO UNION MS21916- | 3 | |
| HU40372 | THIMBLE FIT O RING TO UNION MS21902- | 3 | |
| HU40373 | THIMBLE FIT O RING TO UNION MS21902- | 3 | |
| IAE 3P16434 | FLARING FIXTURE (SELF-LOCKING CLINCH NUT IS 0.250-28 THREAD AND IS FLARED TO 30 DEGREES CONICAL ANGLE) | 1 | |
| IAE1F10007 | PULLER REMOVAL MATING RING GEARBOX A321 | 12 | |
| IAE1F10008 | PULLER REMOVAL MATING RING GEARBOX A321 | 11 | |
| IAE1F10031 | PUSHER/INST MATING RING GEARBOX A321 | 14 | |
| IAE1F10089 | RING, REMOVAL LHT Dwg No.(537260034) | 1 | |
| IAE1F10115 | RING, REMOVAL LHT Dwg No.(537260057) | 1 | |
| IAE1F10243 | RING, REMOVE LHT Dwg No.(537260144) | 5 | |
| IAE1F10244 | RING, REMOVE LHT Dwg No.(537260145) | 1 | |
| IAE1F10245 | RING, REMOVE LHT Dwg No.(537260146) | 1 | |
| IAE1F10246 | RING, REMOVE LHT Dwg No.(537260147) | 1 | |
| IAE1F10247 | RING, REMOVE LHT Dwg No.(537260148) | 1 | |
| IAE1F10248 | RING, REMOVE LHT Dwg No.(537260149) | 1 | |
| IAE1F10249 | RING, REMOVE LHT Dwg No.(537260150) | 1 | |
| IAE1F10254 | RING, REMOVE LHT Dwg No.(537260154) | 5 | |
| IAE1J12004 | V2500 HP/IP ROTOR BEARING EXTRACTOR | 13 | |
| IAE1J12125 | HAMMER, SLIDING-INLET CONE FAIRINGTBU: AB72001-N9I | 12 | |
| IAE1J12358 | IAE 1J12358 INSPECTION RING | 1 | |
| IAE1J13001 | FRONT BRACKET FLANSCH A RINGLHT Dwg No.(537220026) | 2 | |
| IAE1M14080 | RING, CLAMPING LHT Dwg No.(537250121) | 1 | |
| IAE1M14081 | RING, CLAMPING LHT Dwg No.(537250122) | 1 | |
| IAE1M14089 | RING, CLAMPING LHT Dwg No.(537250124) | 1 | |
| IAE1M14142 | RING, CLAMPING LHT Dwg No.(537250143) | 1 | |
| IAE1P16061 | RING, SUPPORT LHT Dwg No.(537250162) | 1 | |
| IAE1P16368 | RING, SUPPORT LHT Dwg No.(537250184) | 1 | |
| IAE1P16567 | FLARING FIXTURE (SELF-LOCKING CLINCH NUT IS 0.250-28 THREAD AND IS FLARED TO 30 DEGREES CONICAL ANGLE) | 3 | |
| IAE1R18021 | RING, SUPPORT LHT Dwg No.(537230046) | 1 | |
| IAE1R18027 | IAE 1R18027 INDEXING RING | 1 | |
| IAE1R18222 | RING, SUPPORT LHT Dwg No.(537230090) | 1 | |
| IAE1R18250 | RING, SPLIT ASSY. LHT Dwg No.(537230096) | 1 | |
| IAE1R18520 | IAE 1R18520 MEASURING SLEEVE | 1 | |
| IAE1R18523 | IAE 1R18523 MEASURING SLEEVE | 1 | |
| IAE1R18525 | IAE 1R18525 MEASURING SLEEVE | 1 | |
| IAE1R18529 | IAE 1R18529 MEASURING SLEEVE | 1 | |
| IAE1R18692 | RING, INDEXING LHT Dwg No.(537230149) | 1 | |
| IAE1R18693 | RING, SUPPORT LHT Dwg No.(537230150) | 1 | |
| IAE1R18831 | RING, SUPPORT LHT Dwg No.(537230188) | 1 | |
| IAE2J13314 | EROSION MEASURING GAGE (0-240MM) | 1 | |
| IAPL4101-12 | ANVIL STYLE PROOF LOAD TOOL FOR BEARING MS14101-12 | 1 | |
| IDCT4101-12 | DRILL PRESS CUTTING TOOL FOR BEARING MS14101-12 | 1 | |
| IDCT4103-12 | Drill Press Cutting Tool for Bearing MS14103-12 | 1 | |
| IDLL-7486 | BLADES, RINGER TOOL (2/PKG) | 1 | |
| IDST-M81936/1-22R | DRILL-PRESS TRI ROLLER SWAGING TOOL FOR BEARING M81936/1-22R | 1 | |
| IDST2128 | Drill Press Tri-Roller Swaging Tool for Bearing 412--010-427-101 | 2 | |
| IDST2345 | Drill Press Tri-Roller Swaging Tool for Bearing 412-310-400-107 ** Technical Equivalent For RST2345 ** | 2 | |
| IDST4101-12 | DRILL PRESS TRI-ROLLER SWAGING TOOL FOR BEARING MS14101-12 | 2 | |
| IDST4103-12 | DRILL PRESS TRI-ROLLER SWAGING TOOL FOR BEARING MS14103-12 OR EN4265AN12 | 1 | |
| IEA1R18893 | PULLER REMOVAL MATING RING GEARBOX A321 | 1 | |
| IN-25 | SPRING SCALE_0 ~ 25 LB_[IN-25] | 1 | |
| INT-500 | TIRE COVERS (no wheelpant faring) (set of 2) | 1 | |
| IOAST-4D0121-24 | ANVIL STAKING TOOL TO SUIT BEARING 4D0121-24 | 1 | |
| IPBT4104-10 | BREAKAWAY TORQUE TEST TOOL (ALL KIT PARTS EXCLUDING TORQUE WRENCH) FOR BEARING MS14102-10) | 1 | |
| IPBT4104-14 | BREAKAWAY TORQUE TEST TOOL (ALL KIT PARTS EXCLUDING TORQUE WRENCH) FOR BEARING MS14102-14) | 1 | |
| IPBT4104-6 | BREAKAWAY TORQUE TEST TOOL (ALL KIT PARTS EXCLUDING TORQUE WRENCH) FOR BEARING MS14102-6) | 1 | |
| IPCT-P21160P20 | Portable Cutting Tool for Bearing P21160P20 and P21160P30 | 1 | |
| IPCT4101-12 | PORTABLE CUTTING TOOL FOR BEARING MS14101-12 | 2 | |
| IPCT4101-7 | Portable Cutting Tool for Bearing MS14101-7 REF: 14658282 | 2 | |
| IPCT4103-12 | PORTABLE CUTTER TOOL FOR MS14103-12 BEARING | 1 | |
| IPCT4104-10 | PORTABLE CUTTING TOOL FOR BEARING MS 14102-10 | 1 | |
| IPCT4104-14 | PORTABLE CUTTING TOOL FOR BEARING MS 14102-14 | 1 | |
| IPCT4104-6 | PORTABLE CUTTING TOOL FOR BEARING MS 14102-6 | 1 | |
| IPCTI-P21160 | SPECIAL PORTABLE CUTTING TOOL FOR BEARING P21160 WITH UPGRADED STEEL, STRONGER SPRING AND PVD COATING | 1 | |
| IPCTI-P21160P20 | SPECIAL PORTABLE CUTTING TOOL FOR BERAING P21160P20 AND P21160P30 WITH UPGRADE STEEL,STRONGER SPRING AND PVD COATING | 1 | |
| IPCTI-P21760 | SPECIAL PORTABLE CUTTING TOOL FOR BEARING P21760 WITH UPGRADED STEEL, STRONGER SPRING AND PVD COATING | 1 | |
| IPCTI-P22970 | SPECIAL PORTABLE CUTTING TOOL FOR BEARING P22970 | 1 | |
| IPCTI-P24490 | SPECIAL PORTABLE CUTTING TOOL FOR BEARING P24490 WITH UPGRADED STEEL, STRONGER SPRING AND PVD COATING | 1 | |
| IPCTI-P2A2360 | PORTABLE CUTTING TOOL SUITABLE FOR BEARING P2A2360 AND P2A2360/P10 WITH UPGRADED STEEL, STRONGER SPRING AND PVD COATING | 1 | |
| IPIR-P21160 | PORTABLE INSTALL/REMOVE TOOL SUITABLE FOR BEARING P21160, P21160P05, AND P21160P10 | 1 | |
| IPIR-P21760 | PORTABLE INSTALL/REMOVE TOOL SUITABLE FOR BEARING P21760 | 1 | |
| IPIR-P22970 | PORTABLE INSTALL/REMOVE TOOL FOR BEARING P22970 | 1 | |
| IPIR-P24490 | PORTABLE INSTALL/REMOVE TOOL TO SUIT P24490 BEARING | 1 | |
| IPIR-P2A2360 | PORTABLE INSTALL/REMOVE TOOL SUITABLE FOR BEARING P2A2360 AND P2A2360P10 | 1 | |
| IPIR4103-12 | PORTABLE INSTALL & REMOVE BEARING MS14103-12 | 1 | |
| IPIRT4104-10 | PORTABLE INSTALLATION/REMOVAL TOOL FOR BEARING MS 14102-10 | 1 | |
| IPIRT4104-14 | PORTABLE INSTALLATION/REMOVAL TOOL FOR BEARING MS 14102-14 | 1 | |
| IPIRT4104-6 | PORTABLE INSTALLATION/REMOVAL TOOL FOR BEARING MS 14102-6 | 1 | |
| IPPLP-P21160 | ADAPTER KIT TO CONVERT PORTABLE PROOF LOAD KIT TO SUIT P21160 BEARINGS. | 1 | |
| IPPLP-P21760 | ADAPTER KIT TO CONVERT PORTABLE PROOF LOAD KIT TO SUIT P21760 BEARINGS. | 1 | |
| IPPLP-P22970 | PORTABLE PROOF LOAD TOOL FOR BEARING P22970 | 1 | |
| IPPLP-P24490 | ADAPTER KIT TO CONVERT PORTABLE PROOF LOAD KIT TO SUIT P24490 BEARINGS | 1 | |
| IPPLP4104-10 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH? DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-10) | 1 | |
| IPPLP4104-14 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH? DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-14) | 1 | |
| IPPLP4104-6 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-6) | 1 | |
| IPST-P21160 | PORTABLE TRI-ROLLER SWAGING TOOL SUITABLE FOR BEARING P21160, P21160P05, AND P21160P10 | 1 | |
| IPST-P21760 | PORTABLE TRI-ROLLER SWAGING TOOL FOR BEARING P21760 | 1 | |
| IPST-P21760DELETE | PORTABLE TRI-ROLLER SWAGING TOOL FOR BEARING P21760 | 1 | |
| IPST-P22970 | PORTABLE TRI-ROLLER SWAGING TOOL FOR BEARING P22970 | 1 | |
| IPST-P24490 | PORTABLE TRI-ROLLER SWAGING TOOL TO SUIT P24490 BEARING | 1 | |
| IPST-P2A2360 | PORTABLE TRI-ROLLER SWAGING TOOL SUITABLE FOR BEARING P2A2360 AND P2A2360P10 | 1 | |
| IPST-S302T001-419 | PORTABLE TRI-ROLLER SWAGING TOOL FOR BEARING S302T001-419 | 1 | |
| IPUT4104-10 | PORTABLE U-ROLLER SWAGING TOOL FOR BEARING MS 14102-10 | 1 | |
| IPUT4104-14 | PORTABLE U-ROLLER SWAGING TOOL FOR BEARING MS 14102-14 | 1 | |
| IPUT4104-6 | PORTABLE U-ROLLER SWAGING TOOL FOR BEARING MS 14102-6 | 1 | |
| IV96-AT120D/FF | IPLEX NX TIP ADAPTOR: OPTICAL TIP ADAPTOR FOR IV96 IPLEX NX INDUSTRIAL VIDEOSCOPES · OUTER DIAMETER: 6.0MM · FIELD OF VIEW: 120° DIRECTION OF VIEW: 0° DIRECT VIEW · FAR FOCUS · DEPTH OF FIELD: 19MM TO INFINITY · DISTAL END LENGTH: 21.4MM · O-RING QTY 6 IN | 1 | |
| IW500MP-4R | 1/2I IMPACT PREMIUM RING ANVIL | 1 | |
| IW500MP-4R3 | 1/2IN IMPACT RING ANVIL LONG | 1 | |
| IZ10IR9X12 | 10MM INSERT RING 9 x 12 | 1 | |
| IZ11IR9X12 | 11MM INSERT RING 9 x 12 | 1 | |
| IZ12IR9X12 | 12MM INSERT RING 9 x 12 | 1 | |
| IZ13IR9X12 | 13MM INSERT RING 9 x 12 | 1 | |
| IZ14IR9X12 | 14MM INSERT RING 9 x 12 | 1 | |
| IZ15IR9X12 | 15MM INSERT RING 9 x 12 | 1 | |
| IZ17IR9X12 | 17MM INSERT RING 9 x 12 | 1 | |
| IZ19IR9X12 | 19MM INSERT RING 9 x 12 | 1 | |
| IZ22IR14X18 | 22MM INSERT RING 14 x 18 | 1 | |
| IZ24IR14X18 | 24MM INSERT RING 14 x 18 | 1 | |
| IZ27IR14X18 | 27MM INSERT RING 14 x 18 | 1 | |
| IZ32IR14X18 | 32MM INSERT RING 14 x 18 | 1 | |
| J3-151 | TIRE COVERS (no wheelpant faring) (set of 2) | 1 | |
| J32001-64 | MEASURING EQUIPT BRAKE PEDAL (SPL-2555 ) | 5 | |
| J32001-68 | MEASURING EQUIPT BRAKE PEDAL (SPL-2555 ) | 8 | |
| J32037-106 | SPL-12460, - REMOVAL/INSTALLATION, MLG AND NLG SPRINGS | 19 | |
| J32037-120 | EQUIPMENT - REMOVAL/INSTALLATION, MLG AND NLG SPRINGS (PRE SB 777-32-0081) | 2 | |
| J32037-122 | EQUIPMENT - REMOVAL/INSTALLATION, MLG AND NLG SPRINGS (PRE SB 777-32-0081) | 7 | |
| J32037-123 | Equipment - Removal/Installation, MLG & NLG Springs (Used On 777F, 777-200LR, 777-300ER) | 4 | |
| J32037-138 | SPRING R/I EQUIPMENT MLG (-121 S/S BY -138) | 6 | |
| J32037-139 | EQUIPMENT - REMOVAL/INSTALLATION, MLG AND NLG SPRINGS (PRE SB 777-32-0081) | 5 | |
| J32042-14 | WRENCH - SPANNER, MLG AFT TRUNION BEARING (INCLUDED IN J32042-89 KIT) | 3 | |
| J32043-162 | SWIVEL HOIST RING (J32043-125) | 1 | |
| J32052-1 | BAR-TORSION NLG STEERING_[J32052-1] | 13 | |
| J32084-33 | 2nd Stage Upper Sizing Ring | 1 | |
| J32084-34 | 2nd Stage Lower Sizing Ring | 1 | |
| J32090-17 | REMOVAL/INSTALLATION EQUIPMENT, MLG DOWNLOCK SPRING (POST SB 777-32-0081) | 6 | |
| J32090-53 | REMOVAL/INSTALLATION EQUIPMENT, MLG DOWNLOCK SPRING (POST SB 777-32-0081) | 6 | |
| J32090-70 | REMOVAL/INSTALLATION EQUIPMENT, MLG DOWNLOCK SPRING (POST SB 777-32-0081) | 8 | |
| J5100 | 9PC 3/8'' SQUARE DRIVE INCH 12PT RING SPANNER SET | 2 | |
| JBC20772000 | GLIDE BEARINGS X 8 ( 2-0772) | 1 | |
| JHW23092 | 2PC RET RING PLIERS SET | 1 | |
| JHW6-4XS | 3/4 DR RET RING HV CRH GGE 2 | 1 | |
| JHW7-1C | 1 DR. O-RING 2-7/8 | 1 | |
| JHW7-2XS | 1DR RET RING HV VRH GGE 2 | 1 | |
| JHW7-3XS | 1DR RET RING CRH GGE 2-1/8 | 1 | |
| JHW7-4XS | 1DR RET RING CRH GGE 2-1/4 | 1 | |
| JHW7-5XS | 1DR RET RING CRH GGE 2-1/2 | 1 | |
| JHW7-6XS | 1DR RET RING CRH GGE 2-5/8 | 1 | |
| JHW9-1D | 1-1/2 DR O-RING 4-5/8 | 1 | |
| JHW9-2G | 1-1/2 DR RETAINING RING 4-1/2 | 1 | |
| JHWPL-1612 | 12 INT/EXT SNAP RING PLIER | 1 | |
| JMP/LUT/D/4972/C500 | 2 X 50 GALLON COMPRESSOR WASHING RING | 1 | |
| JSCV08 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/4) | 2 | |
| JSCV09 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 9/32) | 2 | |
| JSCV10 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/16) | 2 | |
| JSCV16 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/2) | 1 | |
| JSCV20 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/8) | 1 | |
| JSCV22 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 11/16) | 1 | |
| JSCV24 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 3/4 ) | 1 | |
| JSCV26 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 13/16) | 1 | |
| JSCV32 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1) | 1 | |
| JSCV34 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/16) | 1 | |
| JSCV36 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/8) | 1 | |
| JSCV40 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/4) | 1 | |
| JST-050 | CANOPY/ENGINE/TURTLEDECK COVER, for trailering with folded wings (set of 2) | 1 | |
| K-1 | SPRING BALANCE ( 2KG ) | 4 | |
| K-144 | #27 (.144) Standard Spring Cleco | 1 | |
| K-3/32 | 3/32" (#40) Standard Spring Cleco - MADE IN USA! | 2 | |
| K-4557 | MEDIUM DUTY SPRINGS (FOR JACKS BUILT BEFORE 2012) | 2 | |
| K-5/32 | 5/32" (#20 / #21) Standard Spring Cleco - MADE IN USA! | 3 | |
| K-7/32 | 7/32" Standard Spring Cleco | 1 | |
| K27068-2 | Measuring Tool - Support 2 Clamp Set | 6 | |
| K32007-1 | SPL-8462 EQUIPMENT - REMOVAL/INSTALLATION, MLG DRAG BRACE SPRINGS | 7 | |
| K3630 | BEARING CAP ASSEMBLY - NSN 3110015299761 | 2 | |
| K5/32" | 5/32" (#20 / #21) STANDARD SPRING CLECO - MADE IN USA! | 3 | |
| K652-6229-GT | ANVIL STAKING TOOL TO SUIT BEARING 4D0121-24 | 1 | |
| KC135-250 | FWD CHEEK FAIRING BCS PLUG (RC135-250) | 1 | |
| KC135-251 | FWD CHEEK FAIRING LCS SCOOP PLUG (RC135-251), Left & Right Side (set of 2) | 1 | |
| KD2775 | KD Tools 2775 Wheel Bearing Hand Packer | 1 | |
| KDS315077 | RETAINING RING PLIER TIP ITEM# 00996582000P | 1 | |
| KEL-3/32 | 3/32" "KEL" Series Extra Long Grip Spring Cleco | 1 | |
| KEL-5/32 | 5/32" "KEL" Series Extra Long Grip Spring Cleco | 1 | |
| KEN5180120K | 12" SPRING DIVIDERS | 1 | |
| KEN5180520K | 12" SPRING TYPE INSIDE CALIPER GRIP | 1 | |
| KEN5829734 | 1/2"X9/16" STRAIGHT RING WRENCH | 1 | |
| KFX-050 | CANOPY/ENGINE/TURTLEDECK COVER, for trailering with folded wings (set of 2) | 1 | |
| KHD-3/32 | 3/32" "KHD" Series Long Grip Spring Cleco | 3 | |
| KHD-5/32 | 5/32" "KHD" Series Long Grip Spring Cleco | 3 | |
| KIT E | KIT E (W/CASE) MODELS 47/206/204/205/212 SPLINE MEASURING KIT (BELL 206B) | 1 | |
| KK-3/32 | 3/32" Stubby Spring Cleco | 1 | |
| KK-5/32 | 5/32" Stubby Spring Cleco | 1 | |
| KRBC10T22 | GAS SPRINGS SET OF 2 | 1 | |
| KTOART251NB | NUTNBEARING ASMBLY FOR ART251 | 1 | |
| L11-500 | TIRE COVERS (no wheelpant faring) (set of 2) | 1 | |
| LB-825 | Ringer™ Wire Stop - Up to 2.5 Inch | 2 | |
| LC-045E-16 | COMP. SPRING .360 OD X .045 W X 2" LG. STAIN. STL. | 1 | |
| LC320-720 | Ernst Manufacturing LC 320-720 Top Cap Engine Protector - Pack of 2 | 1 | |
| LCB-250 | TIRE COVERS (no wheelpant faring) (set of 2) | 1 | |
| LCTC4809 | #2 BEARING PULLER | 1 | |
| LCTC791 | #2 BEARING INSTALL TOOL | 1 | |
| LDTBL12 | SPRING LOCK DISC 1/2 BLUE | 1 | |
| LDTG12 | SPRING LOCK DISC 1/2 GREEN | 1 | |
| LEMO01 | OLYMPUS EPOCH 650 KNOB LEMO01 ULTRASONIC FLAW DETECTOR; MEASURING RANGE: 0.2 TO 26.5 MHZ; 100-240 V AC | 1 | |
| LG-050 | SCALE - SPRING, 0-50 LBS (AMETEK) ALT DG-200 | 8 | |
| LLA797A001 | SPRING LOADING FIXTURE (2IT) | 1 | |
| LMT 00430 | RING MASTER OUTER PRE-SB 72-1130 | 1 | |
| LMT 00430A | RING MASTER OUTER POST-SB 72-1130 | 1 | |
| LMT962 | FLARING TOOL (NSN: 5120-01-528-6973) | 1 | |
| LTCT 5916 | PULLER BEARING - POSITION 21 | 1 | |
| LTCT14686-01 | REMOVAL TOOL BEARING 2-300-059 | 1 | |
| LTCT30801-01 | Housing, Flush, No. 2 Bearing | 1 | |
| LTCT32111-1001 | REMOVAL TOOL BEARING 2-300-059 | 1 | |
| LTCT3636 | Sleeve Bushing (1-300-002 Bearing) | 1 | |
| LTCT4968-01 | Tool Assembly, No. 2 Bearing Package Installation | 2 | |
| LTCT5916-01 | Puller, Bearing, No. 12 | 1 | |
| LTCT7508-01 | Fixture, No. 2 Bearing Package Pressure Check | 1 | |
| LTCT7518-01 | TOOL SET#2 BEARING | 1 | |
| LTCT7613-01 | PULLER DIFFUSER & #2 BEARING ASSY | 1 | |
| LTCT7845-01 | Fixture, Flow, No. 2 Bearing Housing | 1 | |
| LTXM1020040/1 | TOOL FOR O RING 2/RNT 174 4415 | 1 | |
| M12 SI | M12 SOLDERING IRON | 1 | |
| M20-101 | ENGINE INLET PLUGS, Lasar mod (Cowl Enclosure Fairing) (set of 2) | 1 | |
| M20-505 | MAIN WHEEL TIRE COVERS (no wheelpant faring) (set of 2) | 1 | |
| M201-505 | MAIN WHEEL TIRE COVERS (no wheelpant faring) (set of 2) | 1 | |
| M21836 | COMPRESSION TOOL FOR THE SPRING (2-010) | 2 | |
| M46212 | FALSE JAWS - LOCKING SPRING NLG A320NEO | 7 | |
| M46213 | PIN WRENCH - LOCKING SPRING NLG A320NEO | 7 | |
| M46215 | SPECIAL WRENCH - LOCKING SPRING NLG A320NEO | 6 | |
| M46228 | ADAPTER - LOCKING SPRING NLG A320NEO | 5 | |
| M65725103A | FIXTURE FOR ASSY OF SPRING IN. T17 (2IT) | 1 | |
| M83248-1-011 | RING . AS3209-011 | 1 | |
| MANOMETER | CAPABLE OF MEASURING 0 TO 100 INCHES OF WATER, FOR A320 | 1 | |
| MF08LPDE | LOCKRING REMOVAL TOOL FOR ITEM (2-70) | 1 | |
| MG011W | Bowers MG011W MicroGauge 2-Point Bore Gauge Measuring Head 0.95-1.15mm | 1 | |
| MG012W | Bowers MG012W MicroGauge 2-Point Bore Gauge Measuring Head 1.07-1.25mm | 1 | |
| MG013W | Bowers MG013W MicroGauge 2-Point Bore Gauge Measuring Head 1.17-1.35mm | 1 | |
| MG014W | Bowers MG014W MicroGauge 2-Point Bore Gauge Measuring Head 1.27-1.45mm | 1 | |
| MG015W | Bowers MG015W MicroGauge 2-Point Bore Gauge Measuring Head 1.37-1.55mm | 1 | |
| MG016W | Bowers MG016W MicroGauge 2-Point Bore Gauge Measuring Head 1.50-1.90mm | 1 | |
| MG017W | Bowers MG017W MicroGauge 2-Point Bore Gauge Measuring Head 1.80-2.20mm | 1 | |
| MG018W | Bowers MG018W MicroGauge 2-Point Bore Gauge Measuring Head 2.05-2.45mm | 1 | |
| MG019W | Bowers MG019W MicroGauge 2-Point Bore Gauge Measuring Head 2.25-2.75mm | 1 | |
| MG020W | Bowers MG020W MicroGauge 2-Point Bore Gauge Measuring Head 2.50-3.00mm | 1 | |
| MG021W | Bowers MG021W MicroGauge 2-Point Bore Gauge Measuring Head 2.75-3.25mm | 1 | |
| MG022W | Bowers MG022W MicroGauge 2-Point Bore Gauge Measuring Head 3.00-3.50mm | 1 | |
| MG023W | Bowers MG023W MicroGauge 2-Point Bore Gauge Measuring Head 3.25-3.75mm | 1 | |
| MG024W | Bowers MG024W MicroGauge 2-Point Bore Gauge Measuring Head 3.50-4.00mm | 1 | |
| MG025W | Bowers MG025W MicroGauge 2-Point Bore Gauge Measuring Head 3.75-4.25mm | 1 | |
| MG026W | Bowers MG026W MicroGauge 2-Point Bore Gauge Measuring Head 3.65-4.35mm | 1 | |
| MG027W | Bowers MG027W MicroGauge 2-Point Bore Gauge Measuring Head 4.15-4.85mm | 1 | |
| MG028W | Bowers MG028W MicroGauge 2-Point Bore Gauge Measuring Head 4.65-5.35mm | 1 | |
| MG029W | Bowers MG029W MicroGauge 2-Point Bore Gauge Measuring Head 5.15-5.85mm | 1 | |
| MG030W | Bowers MG030W MicroGauge 2-Point Bore Gauge Measuring Head 5.65-6.35mm | 1 | |
| MG031W | Bowers MG031W MicroGauge 2-Point Bore Gauge Measuring Head 6.15-6.85mm | 1 | |
| MG032W | Bowers MG032W MicroGauge 2-Point Bore Gauge Measuring Head 6.65-7.35mm | 1 | |
| MG033W | Bowers MG033W MicroGauge 2-Point Bore Gauge Measuring Head 7.15-7.85mm | 1 | |
| MG034W | Bowers MG034W MicroGauge 2-Point Bore Gauge Measuring Head 7.65-8.35mm | 1 | |
| MG035W | Bowers MG035W MicroGauge 2-Point Bore Gauge Measuring Head 8.15-8.85mm | 1 | |
| MG036W | Bowers MG036W MicroGauge 2-Point Bore Gauge Measuring Head 8.65-9.35mm | 1 | |
| MG037W | Bowers MG037W MicroGauge 2-Point Bore Gauge Measuring Head 9.15-9.85mm | 1 | |
| MG038W | Bowers MG038W MicroGauge 2-Point Bore Gauge Measuring Head 9.65-10.35mm | 1 | |
| MGR120 | Bowers MGR120 MicroGauge Setting Ring 1.20mm | 1 | |
| MGR200 | Bowers MGR200 MicroGauge Setting Ring 2.00mm | 1 | |
| MGR225 | Bowers MGR225 MicroGauge Setting Ring 2.25mm | 1 | |
| MGR250 | Bowers MGR250 MicroGauge Setting Ring 2.50mm | 1 | |
| MGR275 | Bowers MGR275 MicroGauge Setting Ring 2.75mm | 1 | |
| MGR325 | Bowers MGR325 MicroGauge Setting Ring 3.25mm | 1 | |
| MIT65B02505 | SWAGING TOOL - STATION 2598 BULKHEAD TRUSS BEARING | 1 | |
| MIT65B90361 | TOOL - ROLLER SWAGING, 60B00180-302 BEARING | 3 | |
| MNOR4.0X2 | OÕRING 4.0 I.D. X 2 TORE NITRILE | 1 | |
| MODEL 844/II | RING-TYPE LOAD CELL, 250 KN | 1 | |
| MODEL 844/II - 250 KN | RING - TYPE LOAD CELL 844 - 250 KN | 1 | |
| MODEL235 | SPRING BALANCE UPTO 25 KG | 1 | |
| MORV11.5X2.5 | O'RING VITON 11.5ID X 2.5TH. | 1 | |
| MP004093 | D=3.53 L=2000MM, - RING | 1 | |
| MRO608C3103 | SPL-15028 - ASSEMBLY TOOL - SPRING CLAMP, AUTO RESTOW | 1 | |
| MS16562-229 | SPRING PIN 0.156 X 0.625 STAINLESS STEEL | 1 | |
| MS16562-45 | SPRING PIN 5/32 X 1"1/4 STEEL CADMIUM | 1 | |
| MS16562-60 | SPRING PIN DIA 7/32Ó X 2Ó LG | 1 | |
| MS28775-425 | O-RING 4.475ID X .275 THICK | 1 | |
| MS30 | SHORING STANCHION - 13. 2 TON | 1 | |
| MST25 | TESTER SPRING 20LBS | 1 | |
| MST50 | NSN 6635004903142/ TESTER SPRING WITH DIAL IND | 1 | |
| MSTC-1000/2000 | OCTAGON MEASURING SCALE & TAPE CALIBRATION SYSTEM MODEL MSTC-1000/2000 | 1 | |
| MT-MXI-3502 | KETOS/ AS5282 STEEL RING 4 | 1 | |
| MV414 | BEARING EXTRACTOR TYPE 6201 | 1 | |
| MW498-05 | Bowers MW498-05 Comparator Stand Thread Column Height 280mm Measuring Table Area 98 x 98mm | 1 | |
| MW5012P | Moore & Wright Spring Divider 300mm/ 12" Powder Coated | 1 | |
| MW5112P | Moore & Wright Spring Inside Caliper 300mm/12" P/Coated | 1 | |
| MW5212P | Moore & Wright Spring Outside Caliper 300mm/12" P/Coat | 1 | |
| N414700 | AT120S/FF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING FIELD DEP 20-MM | 1 | |
| N4148800 | AT120D/NF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. 2,275.00 2,275.00 - DIRECTION OF VIEW: DIRECT - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 120° - DEPTH OF FIELD: 2 - 200MM - 1 YEAR WARRANTY | 2 | |
| N4148900 | AT120D/FF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. - DIRECTION OF VIEW: DIRECT - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 120° - DEPTH OF FIELD: 17 - MM - 1 YEAR WARRANTY | 2 | |
| N4149000 | AT100S/NF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. - DIRECTION OF VIEW: SIDE - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 100° - DEPTH OF FIELD: 2 - 15MM - 1 YEAR WARRANTY | 1 | |
| N4149600 | AT120S/NF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING FIELD DEPTH 4-150MM | 2 | |
| NAS1611-145 | O'RING ¿64.77 X 2.616 | 1 | |
| NDT3052 | NEC 4028-2; 0,50 INCH INNER DIAMETER, 1.0 INCH OUTER DIAMETER, 0.84 INCH (21MM) HEIGHT; NDT ENGINEERING CORP | 2 | |
| NDT6076 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6077 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6078 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6079 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NEC 4028-2 | RING PROBE. NEC 4028-2; 0.50 INCH INNER DIAMETER, 1.0 INCH OUTER DIAMETER, 0.84 INCH (21 MM) HEIGHT; NDT ENGINEERING CORP | 1 | |
| NEC-1062 | NDT ENGINEERING CORP. HIGH FREQUENCY PROBE UNSHIELDED 25-500KHZ DIFFERENTIAL,TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| NEC-1062G | NDT ENGINEERING CORP. NEC-1062 PROBE GUIDE. Includes Certificate of Conformance. | 1 | |
| NEC-1087 | 0.25 INCH (6.4 MM) DIAMETER; NDT ENGINEERING | 1 | |
| NEC-4050-1 | Low frequency reflection ring probe; 500Hz-2KHz Fisher/Triax connector. Not to exceed .65" | 1 | |
| NFE27489 | SPRING PIN DIA. 2,5X20 | 1 | |
| NLM0449200-48 | SPRING 20.5 X 8 X 48 STEEL BLACKENED | 1 | |
| NRK-3S/400SS | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 400 Stainless Steel. 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for | 1 | |
| NRK-3S/HX | CUSTOM NAVY EDDY CURRENT BLOCK. Material: Hastelloy X, 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all notc | 1 | |
| NRK-3ST | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 4340 Cres Steel. 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all | 1 | |
| NRK-3T | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 6AL-4V Titanium 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all n | 1 | |
| OEX16B | COMBINATION RING 1/2' | 4 | |
| ORT2-170-173-XNGL | Bojo Tools ORT2-170-173-XNGL O-Ring Pick Tool Large Radius | 1 | |
| ORT2-171-172-XNGL | Bojo Tools ORT2-171-172-XNGL O-Ring Pick Tool Angled | 1 | |
| ORT2-174-175-XNGL | Bojo Tools ORT2-174-175-XNGL O-Ring Pick Tool Small Radius | 1 | |
| ORT2-3KIT-XNGL | Bojo Tools ORT2-3KIT-XNGL 3 Piece O-Ring Tool Kit | 1 | |
| OTC | OTC 1922 - WHEEL BEARING LOCKNUT SOCKET | 1 | |
| OTC 1921 | 2 1/2 INCH 6PT TRUCK WHEEL BEARING LOCKNUT SOCKET | 1 | |
| OTC 1922 2-5/8 | OTC 1922 Wheel Bearing Locknut Socket - 6 Point, 2-5/8" Opening Size | 1 | |
| OTC1922 2-5/8 | Wheel Bearing Locknut Socket - 6 Point, 2-5/8" Opening Size | 1 | |
| OTC518899 | GREEN SPRING LK COUPLER 1/2IN | 1 | |
| OU-50482 | EMB 120 SPRING BOX RESTRAINING DEVICE | 1 | |
| OU-50654 | EMB 120 SPRING BOX RESTRAINING DEVICE | 1 | |
| OXI11B | COMBINATION RING 11/32' | 2 | |
| OXI7B | COMBINATION RING 7/32' | 4 | |
| OXI9B | COMBINATION RING 9/32' | 2 | |
| Olympus Phased Array Weld Inspection Kit | Olympus Phased Array Weld Inspection Kit - he kit contains the following items:, qty 2 A12 5L64 PA probes with 5m cable., qty 2 SA12 N55S Standard Wedge with Removable IHC Ring, qty 1 ‘Y’ Splitter 64/64, for Omniscan MX2, 5m split conduit, Irrigation Tubi | 1 | |
| OÕRING42IDX1.9N | OÕRING 42mm I.D. X 1.9mm ƒP BUNA N | 1 | |
| P-1155 | SPRING (1 1/2" LONG) | 3 | |
| P21160P05 | BEARING (1/2 OVERSIZE) | 1 | |
| P2A1100 | R/I TOOL FOR THE BEARING P2A1100 | 3 | |
| P2D-L006 | Cable, Phasec 2D/3D to Foerster single coil probe (Lemo 00), Straight through wiring | 1 | |
| PA11-141 | TIRE COVERS (no wheelpant faring) (set of 2) | 1 | |
| PA12-171 | TIRE COVERS (no wheelpant faring) (set of 2) | 1 | |
| PA18-500 | TIRE COVERS (no wheelpant faring) (set of 2) | 1 | |
| PA20-121 | TIRE COVERS (no wheelpant faring) (set of 2) | 1 | |
| PD08419 | PROBE, RING, (DONUT) 250HZ - 40KHZ FREQUENCY RANGE, 0.33 IN (8.4 MM) INTERNAL DIAMETER, 0.75 IN (19.0 MM) EXTERNAL DIAMETER | 1 | |
| PG-UL 60 | NORTEC TESTING AND MEASURING INSTRUMENT PG-UL 60 (WITH ACCESSORIES) (2 PACK) | 1 | |
| PLASMA2003 | SWIRL RING 2PC PACK | 1 | |
| PRH502A | 2PC CONVER SNP RING PLIERS | 2 | |
| PSI BEARING TORQUE SOCKETS | 2 SOCKETS FOR TORQUING BEARINGS PS02557606-P21990 | 1 | |
| PWA 103115 | HEATER, ELECTRICAL - HPC, NO. 2 BEARING AND SUPPORT ASSEMBLY | 1 | |
| PWA 17422 | SPACER NO.2 BALANCE BEARING | 1 | |
| PWA 8096 | WRENCH NO.2 BEARING INNER RACE | 1 | |
| PWA101960 | BASE SUPPORTING INTERMEDIATE CASE #2 BEARING HOUSE ASSY | 1 | |
| PWA102275 | DRIFT, PIN- LPC, FAIRING,1ST STG BLADE_[PWA102275] | 1 | |
| PWA115858 | Cover, Preservation - FDGS, #2 Bearing Area | 1 | |
| PWA12270 | BEARING 4 1/2 WRENCH | 1 | |
| PWA12365 | PULLER NO. 4 1/2 OUTER RACE BEARING | 4 | |
| PWA12768 | BEARING 4 1/2 DLIFT FOR SEAL SPACER | 1 | |
| PWA17026 | FLARING TOOL_[PWA17026] | 1 | |
| PWA22756 | SPREADER-RING PLIER_[PWA22756] | 1 | |
| PWA24524 | TOOL - MEASURING, SERVICE WEAR TAP - THREAD CHASING, SPARK IGNITER BOSS CHAMBER TAP - THREAD CHASING, DIFFUSER CASE/IGNITER BOSS THREAD CHASING DIE - 1.00-20UNS-3A THREAD CHASING DIE - 0.9375-16NS | 10 | |
| PWA25132 | RIVETER - NO.3 BEARING OUTER RACE NUT_[PWA25132] | 1 | |
| PWA25187 | DRIFT - AGB SPURGEAR BEARING_[PWA25187] | 2 | |
| PWA25213 | PLATE - AGB SPURGEAR BEARING_[PWA25213] | 2 | |
| PWA25221 | BASE - AGB IDLER GEAR BEARING_[PWA25221] | 2 | |
| PWA25328 | DRIFT - MGB CSD G/SFT ROLLER BEARING_[PWA25328] | 2 | |
| PWA25365 | DRIFT - IMC G/B DR G/SHAFT BEARING_[PWA25365] | 2 | |
| PWA25382 | RING - ENG ASSY,TRUNNION IMC DOWN_[PWA25382] | 2 | |
| PWA25413 | PULLER - LPC ARBOR BEARING REMOVE_[PWA25413] | 1 | |
| PWA25614 | RING, GRADUATED - BRG, #1 CONTACT ANGLE_[PWA25614] | 1 | |
| PWA25624 | RING_[PWA25624] | 1 | |
| PWA25658 | FIXTURE - NO.1,2,3 BEARING FLUSHING_[PWA25658] | 1 | |
| PWA25789 | RING - HPC ROTOR ASSY BLADE RET_[PWA25789] | 1 | |
| PWA25790 | RING - HPC R/BLADE RETNG EVEN NO.STAGES_[PWA25790] | 1 | |
| PWA26008 | GAGE - AGB BALL BEARING,AXIAL PLAY_[PWA26008] | 2 | |
| PWA27048 | SUPPORT RING - 11TH STG STATOR_[PWA27048] | 2 | |
| PWA27392 | DRIFT - FAN ROTOR BAL ARBOR BEARING_[PWA27392] | 1 | |
| PWA27393 | DRIFT - FAN ROTOR BAL ARBOR BEARING_[PWA27393] | 1 | |
| PWA27397 | DRIFT - LPC & HPT BAL ARBOR BEARING_[PWA27397] | 1 | |
| PWA27562 | RING, ADAPTER - #3 BRG HOUSING FIXTURE_[PWA27562] | 2 | |
| PWA27600 | PULLER - 1ST STAGE SCREW JACK_TO REM SPLITTER FAIRING ASSY FR ENG ASSY_229 X 152 MM / 0.75 KG_[PWA27600] | 4 | |
| PWA27641 | TOOL - MEASURING, SERVICE WEAR TAP - THREAD CHASING, SPARK IGNITER BOSS CHAMBER TAP - THREAD CHASING, DIFFUSER CASE/IGNITER BOSS THREAD CHASING DIE - 1.00-20UNS-3A THREAD CHASING DIE - 0.9375-16NS | 5 | |
| PWA27649 | RING_[PWA27649] | 1 | |
| PWA27687 | RING,LOCATING - 7TH STATOR BUILD STD_[PWA27687] | 2 | |
| PWA27688 | RING,LOCATING - 5TH STG COMP DUCT_[PWA27688] | 1 | |
| PWA27734 | RING - REAR COMP DR TURB CASE, FRONT_[PWA27734] | 1 | |
| PWA27735 | RING, ADAPTER - REAR COMP DR TEC REAR_[PWA27735] | 1 | |
| PWA27738 | SPACER - RING, HPC DR TURB R & STATOR_[PWA27738] | 2 | |
| PWA27750 | CLAMP, SPRING - 1ST STG TURB BLADE RET_[PWA27750] | 1 | |
| PWA27756 | PIN, ALIGNING - SEALING RING TO TURB HUB_[PWA27756] | 1 | |
| PWA27790 | PULLER - #3 BRG AREA SEALING RING_[PWA27790] | 2 | |
| PWA27868 | HOLDER, BAL BEARING - TURBINE FRONT_[PWA27868] | 2 | |
| PWA27908 | COVER - NO.3 BEARING FRONT AIRSEAL_[PWA27908] | 1 | |
| PWA28080 | GUIDE - MGB N2 TACH DR BALL BRG RET RING_[PWA28080] | 1 | |
| PWA28157 | RING - 1ST TURB DISK & BLADE SUPPORT_[PWA28157] | 1 | |
| PWA28158 | CLAMP, SECURING - 1ST STG TURB BLADE_[PWA28158] | 2 | |
| PWA28169 | PULLER - LPT AIRSEALING RING SEGMENTS_[PWA28169] | 1 | |
| PWA29366 | SPACER RING_[PWA29366] | 2 | |
| PWA29647 | FIXTURE - SEAL ASSEMBLY, N1 & 2 BEARING_[PWA29647] | 2 | |
| PWA29959 | RING-SUPPORT_[PWA29959] | 1 | |
| PWA45021 | PULLER NO.2 BEARING | 1 | |
| PWA45030 | WRENCH NO.2 BEARING-NUT | 1 | |
| PWA45849 | ANTI-ROTATION ADAPTER NO.2 BEARING | 3 | |
| PWA75901 | RING, GRADUATED - NO.2 BRG CONTACT ANGLE_[PWA75901] | 1 | |
| PWA75913 | FIXTURE - HOLDG NO4 BEARING SEAL SPACER_REPLACESPWA27491BYT.B87-067_[PWA75913] | 1 | |
| PWA76104 | BASE SUPPORTING INTERMEDIATE CASE #2 BEARING FRONT INNER RACE | 1 | |
| PWA76154 | BASE SUPPORTING INTERMEDIATE CASE #2 BEARING FRONT INNER RACE | 5 | |
| PWA76254 | BASE SUPPORTING INTERMEDIATE CASE #2 BEARING HOUSE ASSY | 1 | |
| PWA76283 | RING_[PWA76283] | 2 | |
| PWA76382 | RING_[PWA76382] | 1 | |
| PWA81821 | BRACKET SUPPORT NUMBER 1 & 2 BEARING MANIFOLD | 1 | |
| PWA85018-6 | LEAK TEST SEAL ASSY # 2 BEARING | 1 | |
| PWA85018-7 | SEAL ASSY #2 BEARING | 1 | |
| PWA85375 | FIXTURE HANDLING ENG. ASSY HPC 2 BEARING FRONT CASE | 1 | |
| PWA85378 | FIXTURE HANDLING ENG. ASSY HPC 2 BEARING FRONT CASE | 1 | |
| PWA85379 | FIXTURE HANDLING ENG. ASSY HPC 2 BEARING FRONT CASE | 1 | |
| PWA85384 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85390 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85391 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85403 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85406 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85600 | MACHINING STATOR LPC 1.6,2 AND 3RD STAGE INNER AIRSEAL RING | 1 | |
| PWA88522 | KNOCKER PULLER-LPC, PIN, FAIRING, BLADE,_[PWA88522] | 1 | |
| PWA89501 | DIFFUSER CASE; NO. 2 BEARING OUTER RACE NUT RIVET INTERMEDIATE CASE, NO. 3 BEARING OUTER RACE NUT RIVET | 1 | |
| PWC30423 | No. 2 Bearing Air Seal Installation Drift | 4 | |
| PWC30831 | No. 2 Bearing Oil Flow Check Fitting | 2 | |
| PWC30863 | NO. 2 BEARING COVER PULLER | 2 | |
| PWC34522 | PULLER Nº 2 BEARING HOUSING COVER | 8 | |
| PWC37081 | PULLER - NO 2 BEARING / OIL COOLER | 4 | |
| PWC37251-872 | Slave bearing race N°2 | 1 | |
| PWC37251-932 | Slave bearing race N°12 | 1 | |
| PWC37261-2 | Slave bearing race N°2 | 1 | |
| PWC37909 | Puller, No. 6 Bearing (Pre-SB21018) | 2 | |
| PWC40576 | SOCKET NO. 2 BEARING | 1 | |
| PWC40862 | SPACER SLAVE NO2 BEARING | 1 | |
| PWC42125 | Pusher No. 2 bearing inner race | 1 | |
| PWC46752 | BUILD RING - I/C AND COMP. SUR GHE46292 | 1 | |
| PWC51594 | DRIFT NO12 BEARING | 1 | |
| PWC51919 | RING 2ND STAGE STATOR COMPRESSOR | 1 | |
| PWC54282-5 | Scriber Bearing Radius .02 | 1 | |
| PWC54784 | PULLER, NO 29/30 BEARING (PWC37382 OLDER TOOL NUMBER) | 1 | |
| PWC55364-067 | Slave Bearing Race N° 2 | 1 | |
| PWC55364-127 | Slave Bearing Race N° 12 | 1 | |
| PWC56063-321 | Slave bearing race N°2 | 1 | |
| PWC62290 | SLAVE NO.2 BEARING | 1 | |
| PWC64241-1 | GUIDE PINS NO.2 BEARING COVER ALIGNMENT | 5 | |
| PWC64241-5 | GUIDE PINS NO.2 BEARING COVER ALIGNMENT | 5 | |
| PWC68331-196 | BEARING SLAVE RACE N°2 | 1 | |
| PWC68331-256 | BEARING SLAVE RACE N°12 | 1 | |
| PWC69522 | HOLDER BEARING H-2.1 | 1 | |
| PWC71559 | NO. 2 BEARING COVER PULLER | 7 | |
| PWC71823 | PULLER (BEARING COVER NO 2) | 5 | |
| PWC86612 | DRIFT- NO 2 BEARING HOUSING | 1 | |
| PYT1500005 | D RING .5X2.25IN NONCOND 10PK | 1 | |
| PYT1500126 | TOOL POUCH W D RING AND 2 TRIG | 1 | |
| Q46498 | TOOLFORSPRINGCOMPRESSION_A321BRKASSY,A330BRKASSY | 7 | |
| R-5 -11 | 0.309-0.311 6.7 ±0.25 RUDDER FEEL AND CENTERING UNIT | 1 | |
| R/C-AOAC-2 | COVER-VANE_PREVENT DAMAGE DURING GRD' SVC OR PARK_ANGLE OF ATTACK VANE COVER_[R/C-AOAC-2] | 13 | |
| R1011C | 5/16 X 11/32 RING RATCHET | 3 | |
| R1618C | 1/2"X9/16" RING RATCHET | 5 | |
| R2103 | VACUUM PUMP, CAPABLE OF 62-65 MB SUCTION, TO PULL SUCTION ON INFLATABLE DURING FOLDING | 2 | |
| R21820 | DRAG BRACE SPRING EXTENDER ATR/72 | 2 | |
| R21820000 | SPRING TENSION TOOL(MLG-72) | 6 | |
| R25A | 25 WATT SOLDERING KIT | 1 | |
| R300A220 | SOLDERING IRON 220V | 1 | |
| R40B | SOLDERING IRON 240 VOLTS | 3 | |
| R47163 | "TOOL FOR THE REMOVAL AND INSTALLATION OF THE SPRINGS (1-200)" | 1 | |
| RATCHET RING SPANNERS 5/16" 11/32" | RATCHET RING SPANNERS 5/16" 11/32" | 1 | |
| RB KIT B | Model 206 Spline Measuring Kit | 2 | |
| RB KIT C | Model 204/205/212 Spline Measuring Kit | 1 | |
| RB KIT D | Model 47/206 Spline Measuring Kit | 1 | |
| RB KIT E | Models 47/206/204/205/212 Spline Measuring Kit | 3 | |
| RB T103067 | Sta.220.774 Bearing Hanger Locator | 1 | |
| RB.6-500H | Bridge Ring Probe, 500Hz-2KHz, .60" OD, .250" ID | 1 | |
| RB0006-806-00674 | Bearing Separator 369D25418 T Bearing | 1 | |
| RB0006-806-00675 | Bearing Remover (369D25419) Or (369D25420) | 1 | |
| RB1.2-100H-3 | Ring Probe, Differential, 1.25"OD x .80" ID, 100Hz-1KHz, Triax | 1 | |
| RB1.2-200H | Bridge Ring Probe, 50-300HZ, 1.2" OD, | 1 | |
| RB1.4-100H-3 | Bridge Ring Probe, 1.4" OD, .62" ID , 100Hz-1KHz | 1 | |
| RB23005425 | No. 2 Vz Bearing Inner Race Puller | 2 | |
| RB23005426 | GUIDE, BEARING 2.5 | 2 | |
| RB23006778 | Guide Bearing Spur Adapter Gearshaft C-20 | 2 | |
| RB23008741 | No. 2 Bearing Ball Guide | 2 | |
| RB40/MC/AIRBUS/001 | Airbus A320 Gear Rib Boring and Facing Machine | 1 | |
| RB40MCAIRBUS001 | A320FAM Gear RibBoring & Facing Mach(24) | 1 | |
| RB40MCAIRBUS003 | MLG BORING FIXTURE SB 57-3124 | 1 | |
| RB429WA-MM-67-152-2-2 | Bearing Replacement Work Aid #2 | 1 | |
| RB6796950-8 | RR M250 BEARING PULLER | 2 | |
| RB6893515 | Plate, Puller 12Mm X 37Mm X 12Mm Bearing Accessories Gear Box | 2 | |
| RB6893517 | Plate, Puller 12Mm X 28Mm X 8Mm Bearing Accessories Gear Box | 2 | |
| RB6893518 | Drift, 12Mm X 37Mm X 12Mm & 12Mm X 28Mm X 8Mm Bearings | 2 | |
| RB6893521 | Plate, 15Mm X 42Mm X 13Mm Bearing Puller, Access Gear Box | 1 | |
| RB6893538 | Puller-No. 2 1/2 Bearing Inner Race | 1 | |
| RBA1710-30101-2B | Tail Rotor Feathering Bearing Install Tool (2 Bld) -7/-9/-17/-19 | 3 | |
| RBA9232 | Plug 269A5050-18 Bearing Remover Same As: 269A9232 | 1 | |
| RBI8401T | Wiring System Service Kit for the BAe Jetstream 31, 32 and 41 Aircraft | 1 | |
| RBI8415T | Wiring System Service Kit for the F-28 Fokker Aircraft | 1 | |
| RBI8422T | Wiring System Service Kit for the Boeing 707, 727, 737-200, 747 & 747SP Aircraft | 1 | |
| RBI8425T | Airbus A300, A310, A320, A330, & A340 Wiring System Service Kit | 1 | |
| RBI8429T | Dassault Falcon 10,100,20,200,50 & 900 Wiring System Maintenance Kit | 1 | |
| RBI8430T | Airbus A318, A319, A320, A321, A330, A340 Wiring System Maintenance Kit | 1 | |
| RBI8431T | Canadair Regional Jet CRJ100/200 Wiring System Maintenance Kit | 1 | |
| RBI8434T | Boeing 737-200, -300, -400, -500 Wiring System Maintenance Kit | 1 | |
| RBI8438T | LEARJET 25, 35, & 55 Wiring System Maintanance Kit | 1 | |
| RBI8439T | 228 Dornier Wiring System Maintenance Kit | 1 | |
| RBT18529 | Tail Rotor Trunnion Centering Tool (212) | 3 | |
| RBT18531 | 206 Tail Rotor Trunnion Bearing Removal Work Aid | 2 | |
| RBT18655 | Input Pinion Bearing Pressing Cylinder Work Aid (206 A/B) | 1 | |
| RBT400238 | Bearing Removal (412-240-009-101) | 1 | |
| RBT400265 | Ring (412-240-013-101) | 2 | |
| RBYA605 | RING RATCHET SET, 25 DEGREE OFFSET | 2 | |
| RCEWSCPA320 | A320 WINDSHIELD RAPID CURING SYSTEM | 1 | |
| RDP 1.0/.5-200H | REFLECTION RING PROBE OD 1.0 ID.500 200HZ-10KHZ | 2 | |
| RDP.3-5K-4F | Reflection Ring Probe, .7" OD, .3"ID, 2-20KHz, 4-pin Fischer | 1 | |
| RDP.4-5K-4F | Reflection Ring Probe, .87" OD, .4"ID,1-20KHz, 4-pin Fischer | 1 | |
| RDP.45/2K | Reflection Ring Probe, .83"OD, 0.45"ID, 2KHz | 1 | |
| RDP.45/2K/CFRP | Reflection Ring Probe, .83"OD, 0.45"ID, 2KHz | 1 | |
| RDP.5-100H | Reflection Ring Probe, .5" OD, .325" ID, 100Hz-1Khz, Triax | 1 | |
| RDP.5-100H-4L | Reflection Ring Probe, .5" OD, .325" ID, 100Hz-1Khz, 4 Pin Lemo | 1 | |
| RDP.5/.25-300H | Reflection Ring Probe, .5"OD x .25" ID w/ Triax, 300Hz Center Frequency | 1 | |
| RDP.54-500H | Reflection Ring Probe, .54 OD x .33 ID, 200Hz-10KHz | 1 | |
| RDP.54-800H | Reflection Ring Probe, .54 OD x .33 ID, 500Hz-2Khz | 1 | |
| RDP.55/2K | Reflection Ring Probe, .925"OD, 0.55"ID, 2KHz | 1 | |
| RDP.55/2K/CFRP | Reflection Ring Probe, .925"OD, 0.55"ID, 2KHz | 1 | |
| RDP.6-.33/500H | RING DONUT PROBE, 500 HZ TO 20 KHZ FREQUENCY, REFLECTION ABSOLUTE, SHIELDED, 0.335 IN (8.51 MM) INTERNAL DIAMETER AND 0.600 IN (15.24 MM) EXTERNAL DIAMETER (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| RDP.6-10K-5 | Reflection Ring Probe, 3-20KHz, Triax Connector | 1 | |
| RDP.6-1K-4L | Reflection Ring Probe, Ø.600"OD, .250" ID, 1-10KHz, 4pin Lemo | 1 | |
| RDP.6-200H-1 | Reflection Ring Probe, 100Hz-5KHz, .25 " ID .6" OD, Triax Connector | 1 | |
| RDP.6-2K-5 | Reflection Ring Probe, .6" OD, .255"ID min, 500Hz-20KHz, Triax Connector | 1 | |
| RDP.6-500H | Reflection Ring Probe, Ø.600"OD, .250"ID, 500Hz to 2KHz, Triax Connector | 1 | |
| RDP.6-500H-2M | Reflection Ring Probe, Ø.600"OD, .250"ID, 500Hz to 2KHz, 2-pin Microdot | 1 | |
| RDP.6-500H-5-TF | Reflection Ring Probe, .255"ID min, 500HZ-10KHZ, Triax Connector | 1 | |
| RDP.600-.320/500H | Reflection Ring Probe, .6" OD .32" ID 500Hz-2KHz, going through AL.100-.200, Triax Connector | 1 | |
| RDP.65-.45-500H | Reflection Ring Probe .65" OD .45" ID, 500Hz-2KHz, Triax Connector | 1 | |
| RDP.65-500H | Reflection Ring Probe, Ø.65"OD, .300" ID, 500Hz-2KHz, Triax Connector | 1 | |
| RDP.65-500H-2M | Reflection Ring Probe, Ø.65"OD, .300" ID, 500Hz-2KHz, 2-pin Microdot | 1 | |
| RDP.7-200H-2-2M | Reflection Ring Probe, 100Hz-5KHz, .700" OD, 2-PIN Microdot | 1 | |
| RDP.7-2K-1 | Reflection Ring Probe, Ø.675" OD x .335 ID, 500Hz-20KHz, Triax Connector, NDT3118 | 1 | |
| RDP.7-2K-2 | Reflection Ring Probe, .7" OD, .375" ID, 500Hz-20KHz, Triax Connector | 1 | |
| RDP.7-2K-5 | Reflection Ring Probe, .7" OD, .360"ID, 500Hz-20KHz, Triax Connector | 1 | |
| RDP.7-2K-5-4F | Reflection Ring Probe, .355"ID min, 500Hz-20KHz, 4-pin fischer | 1 | |
| RDP.7-2K-5/4F | RR207-5/4F REFLECTION RING PROBE | 1 | |
| RDP.7-500H | Reflection Ring Probe, Ø.7"OD, .35" ID, 500Hz to 2KHz, Triax Connector | 1 | |
| RDP.7-500H-1-4L | Reflection Ring Probe, Ø.7"OD, .325" ID, 500Hz to 2KHz, 4-pin Lemo Connector | 1 | |
| RDP.75-.33/250H-40K | PROBE, RING, (DONUT) 250HZ - 40KHZ FREQUENCY RANGE, 0.33 IN (8.4 MM) INTERNAL DIAMETER, 0.75 IN (19.0 MM) EXTERNAL DIAMETER | 1 | |
| RDP.75-1K-2M | Reflection Ring Probe, .75"OD, .400" ID, 1-10KHz, 2 pin Microdot | 1 | |
| RDP.75-200H | Reflection Ring Probe,.750"OD, .400" ID, 200Hz-5KHz, Triax Connector | 1 | |
| RDP.75-500H | Reflection Ring Probe, Ø.75"OD, .400" ID, 500Hz to 2KHz, Triax Connector | 1 | |
| RDP.75-500H-1-4L | Reflection Ring Probe, Ø.75"OD, .385" ID, 500Hz to 2KHz, 4-pin Lemo Connector | 1 | |
| RDP.75-500H-5 | Reflection Ring Probe, .750" OD, .400" ID, 500Hz-2KHz | 2 | |
| RDP.75-5K | Reflection Ring Probe, Ø.75"OD, .400"ID, 5-20KHz, Triax Connector | 1 | |
| RDP.75/.40-200K CFRP | Reflection Ring Probe, .75" OD, .40" ID, 1" Height10-200KHz going through CFRP, Triax Connector | 1 | |
| RDP.8-.32/2K | Reflection Ring Probe, .8" OD, .32" ID, height 1" run at 2 K going thru AL | 1 | |
| RDP.8-.34/2K | Reflection Ring Probe, .8" OD, .34" ID, height 1" run at 2 K going thru AL | 1 | |
| RDP.8-.35/2K | Reflection Ring Probe, .8" OD, .35" ID, Height 1" useable at 2K going thru AL | 1 | |
| RDP.8-500H | Reflection Ring Probe, Ø.8"OD, .450" ID, 500Hz to 2KHz, Triax Connector | 1 | |
| RDP.8-500H-1 | Reflection Ring Probe w/ Triax connector, 200Hz-10KHz | 1 | |
| RDP.8-500H-1/2M | Reflection Ring Probe w/ 2-Pin Microdot, 100Hz-10KHz | 1 | |
| RDP.8-500H-1/4L | Reflection Ring Probe w/4 pin lemo 200Hz-10KHz | 1 | |
| RDP.8/.4-200H | Reflection Ring Probe, Ø.8"OD x Ø.4"ID, 200 -600Hz, Triax Connector | 2 | |
| RDP.8/.4-500H | Reflection Ring Probe, Ø.8"OD x Ø.4"ID, 500Hz to 2KHz, Triax Connector | 1 | |
| RDP.85-500H-2M | Reflection Ring Probe, Ø.850"OD x Ø.500"ID, 500Hz-2KHz, 2-Pin Microdot | 1 | |
| RDP.85-5K-2M | Reflection Ring Probe, .85" OD, .500" ID, 5-20KHz, Triax Connector | 1 | |
| RDP.87-.4/10K | Reflection Ring Probe, .87" OD, .4" ID, Height 1", 250Hz-40KHz | 1 | |
| RDP.870-.310/250Hz | Reflection Ring Probe, .87" OD, .31" ID, 250Hz-2KHz | 1 | |
| RDP.9-100H-1 | Reflection Ring Probe, 100Hz-10KHz, 747 P6 53-10-23 | 1 | |
| RDP.9-100H-2 | Reflection Ring Probe, .50" ID x .1.0" OD, 50Hz-5KHz 2 pin microdot | 1 | |
| RDP.9-500H | Reflection Ring Probe, .900"OD .550"ID, 500Hz-2KHz Triax connector | 1 | |
| RDP.9-500H-Ti | Reflection Ring Probe, .41"ID x .90"OD, 500Hz-20KHz, Triax connector | 1 | |
| RDP.9/.4-500H CFRP | Reflection Ring Probe, .9"OD, .4"ID, 500Hz-20KHz, TESTING THRU CFRP TO AL | 1 | |
| RDP.95/.655-12KHz Ti | Reflection Ring Probe, .950" OD, .680" ID, Height 1.25 Frequency 500-20KHz, center freq 12KHz, inspect Ti, | 1 | |
| RDP1-2-6/50HZ-3KHZ TECHNA NDT | LOW FREQUENCY REFLECTION RING PROBE MICRO DOT PROBE CONNECTION AND LEMO 12PIN OR BNC MENTOR EM INSTRUMENT CONNECTION | 1 | |
| RDP1.0-.4/2K | Reflection Ring Probe, 1.0 OD, .400 ID, 2KHz Max Height .710 Thru AL | 1 | |
| RDP1.0-.5/200H | Reflection Ring Probe OD 1.0 ID.500 200Hz-10KHz | 2 | |
| RDP1.0-.7/3KHz-CFRP | Reflection Ring Probe OD 1.0 ID.7 500Hz-20KHz CFRP | 1 | |
| RDP1.0-100H-1/2M | Reflection Ring Probe w/ 2pin Microdot..50Hz-3KHz .5 ID 1.09 OD | 1 | |
| RDP1.0-250H-4L | Reflection Ring Probe, Ø1.0"OD, .300"ID, 250Hz to 40KHz, 4pin Lemo Connector | 1 | |
| RDP1.0-500H-3 | Ring Probe, Reflection, 200Hz-1KHz, Triax connector | 1 | |
| RDP1.0-500H-Ti | Reflection Ring Probe, Ø.55ID x Ø1.0OD, 500Hz to 20KHz, Triax Connector | 1 | |
| RDP1.0/.5-200H | Reflection Ring Probe OD 1.0 ID.500 200-600Hz | 2 | |
| RDP1.0/.65-200K | Reflection Ring Probe, 10-200KHz, .65" ID x 1.0" OD, Triax | 1 | |
| RDP1.1-.65/200H | Reflection Ring Probe 1.0 ID .65 OD 200Hz-720Hz 0.80 -1.0" Height penetrate .290 AL | 1 | |
| RDP1.1-500H-1Ti | Reflection Ring Probe, .64ID x 1.1OD, 500Hz-20KHz, Triax connector, Modified with SS case only | 1 | |
| RDP1.1-500H-Ti | Reflection Ring Probe, .64ID x 1.1OD, 500Hz-20KHz, Triax connector | 1 | |
| RDP1.1/.6-500H CFRP | Reflection Ring Probe, OD 1.1 ID .6, 500Hz-20KHz, GOING THRU CFRP TO AL | 1 | |
| RDP1.1/.78-500H-TI | Reflection Ring Probe, 500HZ-25KHZ | 1 | |
| RDP1.2-.3/100H | Reflection Ring Probe 1.2 OD, .3 ID, 100Hz | 1 | |
| RDP1.2-.4/100H | Reflection Ring Probe 1.2 OD, .410 ID, 100Hz | 1 | |
| RDP1.2-.4/300H | Reflection Ring Probe, 1.2 OD, .410 ID, 300Hz | 1 | |
| RDP1.2-.53/100H | Reflection Ring Probe w/ Triax connector 1.2" OD .530" ID 100Hz to 400Hz | 1 | |
| RDP1.2-.6/500H | Reflection Ring Probe, 50Hz-3KHz, .6 ID similar to RDP1.2-100H-2 | 1 | |
| RDP1.2-.6/50H | REFLECTION RING PROBE, 50HZ-3KHZ, .600 ID, 1.25" OD | 1 | |
| RDP1.2-.75/100H | Reflection Ring Probe, 1.2 OD, .75 ID, 100Hz | 1 | |
| RDP1.2-.77/300H | Reflection Ring Probe, 1.2 OD, .770 ID, 300Hz | 1 | |
| RDP1.2-100H-9 | Reflection Ring Probe, 1.2OD x .7ID x 1.25H, 100Hz-1KHz | 1 | |
| RDP1.2/.65-200K CFRP | Reflection Ring Probe, OD 1.2, ID.65, 1" Height 10-200KHz going through CFRP | 1 | |
| RDP1.25 - .74/50H | LOW FREQUENCY REFLECTION RING PROBE, 50HZ- 1KHZ .74"ID 1.25" OD TRIAX FISCHER CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| RDP1.25-.74/50H | Reflection Ring Probe, 1.25 OD, .74 ID, 50Hz | 1 | |
| RDP1.25-.75/300H | Reflection Ring Probe, outer diameter 1.25", Inner Diameter 0.75", Max Height 1.5" 300Hz-800Hz Center freq. 500Hz | 2 | |
| RDP1.25-.77/300H | Reflection Ring Probe OD 1.25 ID .77 300Hz-800Hz | 2 | |
| RDP1.25-.850/500H | Reflection Ring Probe OD 1.25 ID.850 Height 1.0" 100Hz-1KHz . | 1 | |
| RDP1.25-74/50H | LOW FREQUENCY REFLECTION RING PROBE .MICRO DOT PROBE CONNECTION AND LEMO12 PIN OR BNC MENTOR EM INSTRUMENT CONNECTION | 1 | |
| RDP1.3-.78-500H | LOW FREQUENCY REFLECTION RING PROBE .780"Ø ID, 1.300"Ø OD WITH A TRIAX FISCHER CONNECTOR, 500HZ-20KHZ. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| RDP1.3-.870/250H | Reflection Ring Probe, OD 1.30 ID .870, Height 1", go thru .300 thick, running at 250Hz | 1 | |
| RDP1.3-100H | Reflection Ring Probe, 1.3"OD x .325"ID x 1.0" High, 100Hz-1KHz, Triax | 1 | |
| RDP1.3-200H-TI | Reflection Ring Probe, .75 ID x 1.3 OD, 200Hz-10KHz, for CFRP/Titanium | 1 | |
| RDP1.4-.85-200H | REFLECTION RING PROBE, OUTER DIAMETER 1.40, INNER DIAMETER .85, MAX HEIGHT 1.75, CENTER FREQ 200HZ 100-500HZ | 1 | |
| RDP1.40-.85-200H | Reflection Ring Probe, outer diameter 1.40, inner diameter .85, Max Height 1.75, center freq 200Hz 100-500Hz | 1 | |
| RDP1.5-500H-TI | Reflection Ring Probe w/ Triax connector, .80ID x 1.0H, 500H-20KHz, for titanium | 1 | |
| RDP1.56-100H | Reflection Ring Probe w/ Triax connector, Equivalent to SPO-2433 | 1 | |
| RDP1.57-1.07/500H | Reflection Ring Probe, 1.57 OD, 1.07 ID, Height 1.0", 100Hz-1 KHz, .450 Thick AL Radius .250 | 1 | |
| RDP2.0-1.50/100H | Reflection Ring Probe, OD 2.0", ID 1.5", Height 1.7"-2.0", 50Hz-500Hz go thru .660 AL | 1 | |
| RDTA0-01-02 | DEBURRING TOOL (SIZES FROM 8 TO 12) | 1 | |
| RDTA0-01-03 | DEBURRING TOOL (SIZES FROM 16 TO 24) | 1 | |
| RF08LPDE | LOCKRING REMOVAL TOOL FOR ITEM (2-70) | 2 | |
| RGS-25 | 25 PIECE RADIUS GAGE MEASURING SET WITH STORAGE POUCH | 1 | |
| RH60B | SOLDERING STATION 220V | 1 | |
| RKC4101-7 | PORTABLE CUTTING TOOL FOR BEARING MS14101-7, ABG7V-102 | 2 | |
| RKC4103-12 | BEARING CUTTER, A320, RUDDER, | 2 | |
| ROPER WHITNEY 152 | FOOT SQUARING SHEAR 52 INCH CUT 16 GAUGE | 1 | |
| RPD1.0/.5-200H | LOW FREQUENCY REFLECTION RING PROBE .500"Ø ID X 1.0"Ø OD 200HZ-3KHZ WITH A TRIAX FISCHER CONNECTOR. 737 PART 6 57-10-60, PG.2 USED WITH NDT3157. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| RR019-5TF | RING (ENCIRCLING) PROBE (REFLECTION TYPE) - CAPABLE OF OPERATING AT 100 HZ, WITH THE FOLLOWING DIMENSIONS: OD = 0.9 INCH (2.28 CM) ID = 0.45 INCH (1.14 CM). | 1 | |
| RR0510-6 | LOW FREQUENCY REFLECTION RING PROBE .525"Ø ID 1.025"Ø OD, TRIAX FISCHER CONNECTOR 200HZ-10KHZ. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| RR058-1 | REFLECTION RING PROBE .81 OD, .30 ID W/ 2-PIN MICRODOT CONNECTOR, 200HZ-10KHZ | 1 | |
| RR206-5 | RING DONUT PROBES REFLECTION ABSOLUTE 500 HZ - 20 KHZ 6.35 MM (0.25 IN.) 15.24 MM (0.6 IN.) TRIAX FI | 1 | |
| RR206-5/TF | RING DONUT PROBES REFLECTION ABSOLUTE 500 HZ - 20 KHZ 6.35 MM (0.25 IN.) 15.24 MM (0.6 IN.) TRIAX FISCHER RR206-5-TF | 1 | |
| RR206-5TF | RING DONUT PROBES REFLECTION ABSOLUTE 500 HZ - 20 | 1 | |
| RR207-1 | RING DONUT PROBE, 500 HZ TO 20 KHZ FREQUENCY, REFLECTION ABSOLUTE, SHIELDED, 0.335 IN (8.51 MM) INTERNAL DIAMETER AND 0.600 IN (15.24 MM) EXTERNAL DIAMETER (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| RR207-5-4F | RR207-5/4F REFLECTION RING PROBE | 1 | |
| RR207-5TF | REFLECTION RING PROBE, .7" OD, .350"ID, 500HZ-20KHZ, TRIAX CONNECTOR | 1 | |
| RRO112-5/TF.50HZ-3KHZ OLYMPUS NDT | LOW FREQUENCY REFLECTION RING PROBE MICRO DOT PROBE CONNECTION AND LEMO 12PIN OR BNC MENTOR EM INSTRUMENT CONNECTION | 1 | |
| RRT027921 | BEARING EXTRACTOR (OP12) | 1 | |
| RRT050428 | BEARING HOUSING ROLLER CARRIAGE BULLETIN CHANGE 03/2017 | 1 | |
| RRT069137 | SUPPORT RING - STAGE 2 STATOR | 1 | |
| RRT106092 | Balance Bearing Housing Tool- RR has to supply bearings 2 off required | 1 | |
| RRT109684 | SET THE CENTRALISING SCREWS ON THE STAGE 2 UNISON RINGS | 1 | |
| RRT7008 | BEARING R/I, A320, RUDDER | 2 | |
| RST1015 | DRILL PRESS TRI-ROLLER SWAGING TOOL FOR BEARING MS14103-12 OR EN4265AN12 | 2 | |
| RST2448 | BEARING SWAGING TOOL P/N RST2448 REXNORD CORP PORTABLE SUPPLIER ITEM NO: RST2448 | 2 | |
| RST2497 | PORTABLE TRI-ROLLER SWAGING TOOL EQUIVALENT TO RST2497 SUITED FOR BEARING BACB10FA09G | 2 | |
| RST2961 | DRILL-PRESS TRI ROLLER SWAGING TOOL FOR BEARING M81936/1-22R | 1 | |
| RST4187 | BEARING SWAGER, A320, RUDDER, | 2 | |
| RST4329 | BEARING SWAGER USED ON SPOILERS SHAFER/REXNORD 77896-RST4329 | 1 | |
| RSW#12-SZ | REGULAR SPRING WASHER #12 STEEL ZINC | 1 | |
| RSW#2-SZ | REGULAR SPRING WASHER #2 STEEL ZINC | 1 | |
| RSWM16-SSA2 | REGULAR SPRING WASHER M16 STAINLEES STEEL A2 | 1 | |
| RSWM20-SZ | REGULAR SPRING WASHER M20 STEEL ZINC | 1 | |
| S-17-1 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 1, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-2 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 2, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-3 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 3, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-4 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 4, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-5 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 5, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-6 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 6, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-7 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 7, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-8 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 8, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-4933959-521 | LOCK - CIRCUIT BREAKER, WITH TAG "REMOVE BEFORE FLIGHT" (MINIMUM ORDER OF $150 REQUIRED). REPLACES B27065-12 LOCK. (PACO PLASTICS & ENGINEERING INC) | 13 | |
| S-4933959-531 | LOCK - CIRCUIT BREAKER, WITH TAG "INOPERATIVE - DO NOT OPERATE" (MINIMUM ORDER OF $150 REQUIRED). REPLACES B27065-12 C (PACO PLASTICS & ENGINEERING INC) | 11 | |
| S108-505 | TIRE COVERS (no wheelpant faring) (set of 2) | 1 | |
| S2601 | PRESSURE MEASURING INSTRUMENT S2600 | 1 | |
| S47032 | SPRING (1-260) INSTALLATION TOOL | 2 | |
| S4933959-521 | LOCK - CIRCUIT BREAKER, WITH TAG "REMOVE BEFORE FLIGHT" (MINIMUM ORDER OF $150 REQUIRED). REPLACES B27065-12 LOCK. (PACO PLASTICS & ENGINEERING INC) | 13 | |
| S4933959-529 | PACO PLASTICS S4933959-529 FAA-PMA NATURAL/CLEAR CIRCUIT BREAKER LOCKOUT RING WITH "INOPERATIVE" TAG | 1 | |
| S4933959-531 | LOCK - CIRCUIT BREAKER, WITH TAG "INOPERATIVE - DO NOT OPERATE" (MINIMUM ORDER OF $150 REQUIRED). REPLACES B27065-12 C (PACO PLASTICS & ENGINEERING INC) | 11 | |
| SA010503 | BEARING EXTRACTOR (SMALL BEAR.) (2IT) | 1 | |
| SA30032 | BEARING ALIGNMENT MANDREL AND GAP GAGE 32-42-92 | 2 | |
| SA30056 | BEARING ALIGNMENT MANDREL AND GAP GAGE 32-42-91 | 2 | |
| SA30161 | Tire removal rings (2 off) | 1 | |
| SB4-2 | SPRING 16112 | 3 | |
| SB5077-101 | BEARING,PLAIN,SELF-ALIGNING, 3120010842543 | 1 | |
| SC-2240 | 2000ML PLASTIC MEASURING CUP | 1 | |
| SCA-440A-1 | CROW RING SPANNER KIT 3/8" - 2" | 1 | |
| SCV08 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/4) | 1 | |
| SCV09 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 9/32) | 1 | |
| SCV10 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/16) | 1 | |
| SCV16 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/2) | 1 | |
| SCV20 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/8) | 1 | |
| SCV22 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 11/16) | 1 | |
| SCV24 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 3/4 ) | 1 | |
| SCV26 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 13/16) | 1 | |
| SCV28 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 7/8) | 1 | |
| SCV32 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1) | 1 | |
| SCV34 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/16) | 1 | |
| SCV36 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/8) | 1 | |
| SCV40 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/4) | 1 | |
| SECURING PLATE (GU28995) | SECURING PLATE (GU28995) | 1 | |
| SI012 | 12W CORDLESS SOLDERING IRON | 1 | |
| SJ-210 | SURFACE ROUGHNESS MEASURING TESTER SURFTEST SJ-210 | 8 | |
| SK5783 | PROTRACTOR-NLG STEERING ANGLE Q1,2,3,400 WITH KIT GSB3251005 | 4 | |
| SLH-V260-SM | SPRING LOADED TRASDUCER HOLDER. FITS V260-SM SONOPEN | 1 | |
| SNG 375-3L | .375" X 3" LONG, SPRING LOADED TIP SURFACE PROBE, 20KHZ, BRIDGED, TRIAX CONNECTOR | 1 | |
| SNI SRES 24 | RING ADAPTOR 3/4 (ADOPTER TORQUE WRENCH 3/4 WR S2) | 1 | |
| SP1/16X1/2-SS | SPRING PIN 1/16X1/2-STAINLESS | 1 | |
| SP1/16X1/2-SZ | SPRING PIN 1/16 X 1/2 STEEL ZINC | 1 | |
| SP1/2X3"1/2-SS | SPRING PIN 1/2 X 3"1/2 STAINLESS 420 | 1 | |
| SP1/2X3-SBO | SPRING PIN 1/2 X 3 STEEL BLACK OXIDE | 1 | |
| SP1/2X3-SS | SPRING PIN 1/2 X 3 STAINLESS STEEL | 1 | |
| SP1/4X1"1/2-SS420 | SPRING PIN 1/4 X 1"1/2 STAINLESS STEEL 420 | 1 | |
| SP1/4X1"1/2-SZ | SPRING PIN ¿1/4X 1"1/2 STEEL ZINC PER ANSI B18.8.2 | 1 | |
| SP1/4X1"1/4-SS420 | SPRING PIN 1/4 X 1"1/4 STAINLESS STEEL 420 HRC 43 TO 52 | 1 | |
| SP1/4X1/2 | SPRING PIN 1/4X1/2 | 1 | |
| SP1/4X1/2-SZ | SPRING PIN 1/4 X 1/2 STEEL ZINC | 1 | |
| SP1/4X2"1/2-S | SPRING PIN 1/4 X 2"1/2 STEEL | 1 | |
| SP1/4X2"1/2-SS | SPRING PIN 1/4 X 2"1/2 STAINLESS STEEL | 1 | |
| SP1/4X2"1/2-SZ | SPRING PIN 1/4 X 2"1/2 STEEL ZINC | 1 | |
| SP1/4X2"1/4-SZ | SPRING PIN 1/4 X 2"1/4 STEEL ZINC | 1 | |
| SP1/4X2"3/4-SZ | SPRING PIN 1/4 X 2"3/4 STEEL ZINC | 1 | |
| SP1/4X2-S | SPRING PIN 1/4 X 2 | 1 | |
| SP1/4X2-SS | SPRING PIN 1/4"X2" STAINLESS STEEL | 1 | |
| SP1/4X2-SZ | SPRING PIN 1/4 X 2 STEEL ZINC | 1 | |
| SP1/4X23/4 | SPRING PIN 1/4X23/4 | 1 | |
| SP1/8X1"1/2-S | SPRING PIN 1/8 X 1"1/2 STEEL | 1 | |
| SP1/8X1"1/2-SS | SPRING PIN 1/8 X 1"1/2 STAINLESS | 1 | |
| SP1/8X1/2-SS420B18.8.2 | SPRING PIN 1/8 X 1/2 SS420 B18.8.2 | 1 | |
| SP1/8X2 | SPRING PIN 1/8 X 2 | 1 | |
| SP1/8X2-SS | SPRING PIN 1/8 X 2 STAINLESS STEEL | 1 | |
| SP3/16X1"1/2-SZ | SPRING PIN 3/16X1"1/2 STEEL ZINC | 1 | |
| SP3/16X2-S | SPRING PIN 3/16 X 2 STEEL | 1 | |
| SP3/32X1"1/2-SS | SPRING PIN 3/32 X 1"1/2 STAINLESS | 1 | |
| SP3/32X1"1/4-S | SPRING PIN 3/32 X 1"1/4 ,STEEL | 1 | |
| SP3/32X1-SS18-8 | SPRING PIN 3/32X1" STAINLESS STEEL 18-8 | 1 | |
| SP3/32X3/4-SS | SPRING PIN 3/32 X 3/4 STAINLESS STEEL | 1 | |
| SP3/32X3/4-SZ | SPRING PIN 3/32 X 3/4 STEEL ZINC | 1 | |
| SP3/32X3/8-SS18-8 | SPRING PIN 3/32X3/8 STAINLESS STEEL 18-8 | 1 | |
| SP3/32X3/8SS | SPRING PIN 3/32DIA. X 3/8LG ST. STEEL | 1 | |
| SP3/32X7/8-SZ | SPRING PIN 3/32 X 7/8 STEEL ZINC | 1 | |
| SP3/8X1"1/2-SZ | SPRING PIN 3/8 X 1"1/2 STEEL ZINC | 1 | |
| SP3/8X1-SS | SPRING PIN 3/8 X 1 STAINLESS STEEL 420 | 1 | |
| SP3/8X2-SS | SPRING PIN 3/8 X 2 STAINLESS STEEL 420 | 1 | |
| SP5/32X1"3/8-SS | SPRING PIN 5/32 X 1"3/8 STAINLESS STEEL | 1 | |
| SP5/32X1/2-SS | SPRING PIN 5/32X1/2 SS 18-8 | 1 | |
| SP5/32X1/2-SZ | SPRING PIN 5/32 X 1/2 STEEL ZINC | 1 | |
| SP5/32X11/4 | SPRING PIN 5/32X11/4 | 1 | |
| SP5/32X13/8 | SPRING PIN 5/32X13/8 | 1 | |
| SP5/32X3/4 | SPRING PIN 5/32 X 3/4 | 1 | |
| SP5/32X5/8-SZ | SPRING PIN 5/32 X 5/8 STEEL ZINC PLATED | 1 | |
| SP5/64X1"1/2-SZ | SPRING PIN 5/64 X 1"1/2 STEEL ZINC | 1 | |
| SP7/32X1-SS420 | SPRING PIN 7/32 X 1 STAINLESS STEEL 420 | 1 | |
| SP7/32X2-SS420 | SPRING PIN 7/32X2 STAINLESS STEEL 420 | 1 | |
| SPD.125-200K | Spring Loaded Probe, .125" Diameter, 50-500KHz, Triax | 1 | |
| SPD.125-500K | Spring Loaded Probe, .125" Diameter, 200KHz-1MHz, Triax Connector | 1 | |
| SPD.25-200K | Spring Loaded Probe, .250" Diameter, 50-500KHz, Triax | 1 | |
| SPD.25-20K | .250" Spring Loaded Tip Surface Probe, 20-100KHz, Triax Connector | 1 | |
| SPD.375-20K | .375" x 3" Long, Spring Loaded Tip Surface Probe, 20KHz, Triax Connector | 1 | |
| SPD.375-25K-2M | .375" x 3" Long, Spring Loaded Tip Surface Probe, 10-50KHz, 2 Pin Microdot | 1 | |
| SPD.375-2K-2M | .375" Spring Loaded Tip Surface Probe, 1-5KHz, 2 Pin Microdot | 1 | |
| SPD.375-5K-2M | .375" Spring Loaded Tip Surface Probe, 5-10KHz, 2 Pin Microdot | 1 | |
| SPLIT-RING1-1/2" | SPLIT RING 1-1/2" | 1 | |
| SPLIT-RING1/2" | SPLIT RING 1/2" | 1 | |
| SPLIT-RING2" | SPLIT RING 2" | 1 | |
| SPLIT-RING2-1/16" | SPLIT RING 2-1/16" | 1 | |
| SPLIT-RING2-1/2" | SPLIT RING 2-1/2" | 1 | |
| SPLIT-RING2-1/4" | SPLIT RING 2-1/4" | 1 | |
| SPLIT-RING2-1/8" | SPLIT RING 2-1/8" | 1 | |
| SPLIT-RING2-11/16" | SPLIT RING 2-11/16" | 1 | |
| SPLIT-RING2-13/16" | SPLIT RING 2-13/16" | 1 | |
| SPLIT-RING2-15/16" | SPLIT RING 2-15/16" | 1 | |
| SPLIT-RING2-3/16" | SPLIT RING 2-3/16" | 1 | |
| SPLIT-RING2-3/4" | SPLIT RING 2-3/4" | 1 | |
| SPLIT-RING2-3/8" | SPLIT RING 2-3/8" | 1 | |
| SPLIT-RING2-5/16" | SPLIT RING 2-5/16" | 1 | |
| SPLIT-RING2-5/8" | SPLIT RING 2-5/8" | 1 | |
| SPLIT-RING2-7/16" | SPLIT RING 2-7/16" | 1 | |
| SPLIT-RING2-9/16" | SPLIT RING 2-9/16" | 1 | |
| SPM12X26-S | SPRING PIN M12 X 26 STEEL | 1 | |
| SPM12X60-SZ | SPRING PIN M12X60 ZINC | 1 | |
| SPM16X26-S | SPRING PIN M16X26 STEEL | 1 | |
| SPM2.5X12-S | SPRING PIN M2.5X12-ST (DIN 1418) | 1 | |
| SPM2.5X14 | SPRING PIN M2.5 X 14 | 1 | |
| SPM2.5X18 | SPRING PIN M2.5X18 | 1 | |
| SPM2.5X18-S | SPRING PIN M2.5 X 18 STEEL | 1 | |
| SPM2.5X20 | SPRING PIN DIA.2.5 X 20LG | 1 | |
| SPM2.5X20-S | SPRING PIN M2.5 X 20 STEEL | 1 | |
| SPM2.5X24-S | SPRING PIN M2.5X24 ST (DIN1481) | 1 | |
| SPM2.5X30-S | SPRING PIN M2.5 X 30 STEEL | 1 | |
| SPM2.5X30-SS | SPRING PIN M2.5 X 30 STAINLESS STEEL | 1 | |
| SPM2X10-S | SPRING PIN M2 X 10 STEEL | 1 | |
| SPM2X12-S | SPRING PIN M2 X 12 STEEL | 1 | |
| SPM2X14-S | SPRING PIN M2 X 14 STEEL | 1 | |
| SPM2X16-SBO | SPRING PIN M2 X 16 BLACK OXIDE | 1 | |
| SPM2X20-S | SPRING PIN M2 X 20 STEEL | 1 | |
| SPM2X24-S | SPRING PIN M2 X 24 STEEL | 1 | |
| SPM2X24-SS | SPRING PIN M2 X 24 STAINLESS STEEL | 1 | |
| SPM2X26-S | SPRING PIN M2X26 STEEL | 1 | |
| SPM2X6 | SPRING PIN M2X6 | 1 | |
| SPM3X20 | SPRING PIN M3 X 20 | 1 | |
| SPM3X20-SS | SPRING PIN M3 X 20 STAINLESS STEEL | 1 | |
| SPM3X20-SZ | SPRING PIN M3 X 20 STEEL ZINC | 1 | |
| SPM3X22-S | SPRING PIN M3 X 22 STEEL | 1 | |
| SPM3X24-SZ | SPRING PIN M3 X 24 STEEL ZINC | 1 | |
| SPM3X25 | SPRING PIN M3 X 25 | 1 | |
| SPM3X26 | SPRING PIN M3 X 26 | 1 | |
| SPM4X12-S | SPRING PIN M4 X 12 STEEL | 1 | |
| SPM4X20 | SPRING PIN M4 X 20 | 1 | |
| SPM4X20-SZ | SPRING PIN M4 X 20 STEEL ZINC | 1 | |
| SPM4X24-S | SPRING PIN M4X24 STEEL | 1 | |
| SPM4X26-S | SPRING PIN M4 X 26 STEEL | 1 | |
| SPM4X32-S | SPRING PIN M4 X 32 | 1 | |
| SPM5X20-SZDIN1481 | SPRING PIN M5X20 ST ZN PL | 1 | |
| SPM6X20-S | SPRING PIN M6 X 20 STEEL | 1 | |
| SPR.25-100K | .250" Spring Loaded Tip Surface Probe, 25-200KHz, Triax Connector, Reflection | 1 | |
| SPR100X | RING GAGE MASTER 3.93723" | 1 | |
| SPR101N | Bowers SPR101N SmartPlug Ring Gauge (Grade Nominal) 101.85 - 120.90mm | 1 | |
| SPR101X | Bowers SPR101X SmartPlug Ring Gauge (Grade X) 101.85 - 120.90mm | 1 | |
| SPR101XX | Bowers SPR101XX SmartPlug Ring Gauge (Grade XX) 101.85 - 120.90mm | 1 | |
| SPR120N | Bowers SPR120N SmartPlug Ring Gauge (Grade Nominal) 120.90 - 139.95mm | 1 | |
| SPR120X | Bowers SPR120X SmartPlug Ring Gauge (Grade X) 120.90 - 139.95mm | 1 | |
| SPR120XX | Bowers SPR120XX SmartPlug Ring Gauge (Grade XX) 120.90 - 139.95mm | 1 | |
| SPR12N | Bowers SPR12N SmartPlug Ring Gauge (Grade Nominal) 12.95 - 20.96mm | 1 | |
| SPR12X | Bowers SPR12X SmartPlug Ring Gauge (Grade X) 12.95 - 20.96mm | 1 | |
| SPR12XX | Bowers SPR12XX SmartPlug Ring Gauge (Grade XX) 12.95 - 20.96mm | 1 | |
| SPR197N | Bowers SPR197N SmartPlug Ring Gauge (Grade Nominal) 197.10 - 200mm | 1 | |
| SPR197X | Bowers SPR197X SmartPlug Ring Gauge (Grade X) 197.10 - 200mm | 1 | |
| SPR197XX | Bowers SPR197XX SmartPlug Ring Gauge (Grade XX) 197.10 - 200mm | 1 | |
| SPR20N | Bowers SPR20N SmartPlug Ring Gauge (Grade Nominal) 20.96 - 28.83mm | 1 | |
| SPR20X | Bowers SPR20X SmartPlug Ring Gauge (Grade X) 20.96 - 28.83mm | 1 | |
| SPR20XX | Bowers SPR20XX SmartPlug Ring Gauge (Grade XX) 20.96 - 28.83mm | 1 | |
| SPR28N | Bowers SPR28N SmartPlug Ring Gauge (Grade Nominal) 28.83 - 38.35mm | 1 | |
| SPR28X | Bowers SPR28X SmartPlug Ring Gauge (Grade X) 28.83 - 38.35mm | 1 | |
| SPR28XX | Bowers SPR28XX SmartPlug Ring Gauge (Grade XX) 28.83 - 38.35mm | 1 | |
| SPR6N | Bowers SPR6N SmartPlug Ring Gauge (Grade Nominal) 6.1 - 9.27mm | 1 | |
| SPR6X | Bowers SPR6X SmartPlug Ring Gauge (Grade X) 6.1 - 9.27mm | 1 | |
| SPR6XX | Bowers SPR6XX SmartPlug Ring Gauge (Grade XX) 6.1 - 9.27mm | 1 | |
| SPR9N | Bowers SPR9N SmartPlug Ring Gauge (Grade Nominal) 9.27 - 12.95mm | 1 | |
| SPR9X | Bowers SPR9X SmartPlug Ring Gauge (Grade X) 9.27 - 12.95mm | 1 | |
| SPR9XX | Bowers SPR9XX SmartPlug Ring Gauge (Grade XX) 9.27 - 12.95mm | 1 | |
| SPRING BALANCE | Spring balance 0-250 gram | 1 | |
| SPRING COMPRESSOR | A321 EMERGENCY EXIT SPRING COMP TOOL | 1 | |
| SPRING-BALANCE0-120LBS | SPRING BALANCE 0-120LBS | 1 | |
| SPRING-BALANCE0-56LBS | SPRING BALANCE 0-56LBS / 0-25KG | 1 | |
| SPTech RR206-5 | Ring Reflection Probe, .255"ID min, 1-5KHz, Triax | 1 | |
| SRES 24 | RING ADAPTOR 3/4 (ADOPTER TORQUE WRENCH 3/4 WR S2) | 2 | |
| SRPC112 | RETAINING RING PLIER SET INT/EXT 12PC | 2 | |
| SRPC1120 | 2 PCS RETAINING RING PLIERS SET (ORANGE) | 1 | |
| SRPC4790 | CONVERTIBLE RETAINING RING PLIERS, 6-1/2" LENGTH, 90° TIP ANGLE (RED) | 1 | |
| SRPCR112 | 12PC SNAP RING PLIERS SET RED | 1 | |
| SRPCR112BK | 12PC SNAP RING PLIERS SET RED | 1 | |
| SRPCR112G | 12PC SNAP RING PLIERS SET GRN | 1 | |
| SRPCR112O | 12PC SNAP RING PLIERS SET ORN | 1 | |
| SRPCR1200FR | 12PC SNAP RING PLIER FSET | 1 | |
| SRT-2 | TERRY HUGUENIN CO SRT-2 SNAP RING INSERTION TOOL | 1 | |
| ST-1624-2 | THRUST BEARING I.D. 1/2 X O.D. 3/4 X 1/16 THK | 1 | |
| ST-1632-2 | BRONZE THRUST BEARING ¿1/2I.D. X ¿1"O.D. | 1 | |
| ST-25 | LYCOMING Engines ST-25 Valve Spring and Bar Compressor | 2 | |
| ST150-100 | G200 SHORING EQUIPMENT | 1 | |
| ST200-119 | G200 SHORING EQUIPMENT | 1 | |
| ST2220-1-11A | POSITIONER,SPRING LOAD(ST2220-1-11A) | 1 | |
| ST22220-1-14A | POSITIONER,SPRING LOADED(ST2220-1-14A | 1 | |
| ST2580-267 | SPANNER WRENCH ADAPTER FOR BACN10RF BEARING RETAINER NUTS (ST2580-267 DRAWING) | 15 | |
| ST2580-267-XX-X-X | WRENCH - SPANNER ADAPTER FOR BACN10RF BEARING RETAINER NUTS (ST2580-267 DRAWING) | 1 | |
| ST2580-381 | WRENCH BEARING CAP 11-H-02 | 4 | |
| ST3821-01 | RING, RETAINING, 0.238 SFT DIA X 0.029 | 1 | |
| ST848 | Kit - O-Ring Tool, Installation (ST848-187, ST848-250, ST848-312, ST848-375, ST848-500, ST848-625, ST848-750, ST848-1000, ST848-1250, ST848-1500, ST848-1750) | 15 | |
| ST848-1500 | INSTALLATION TOOL ORING 1-1/2 IN | 1 | |
| ST848-500 | PARTINSTALLATION TOOL ORING 1/2 IN | 4 | |
| ST8783F2-0969-054 | SET: ANVIL & LOAD RING,2PC, FOR BEARING PROOF LOAD TEST | 1 | |
| ST926G | STANDARD TOOL - BEARING REMOVE/INSTALL/SWAGE, BEARING WITH GROOVE 0.500 TO 1.250-INCH RACE SWAGE (TYPE III) | 1 | |
| ST927-8 | BEARING REMOVAL TOOL 0.5625" DIA BEARI | 1 | |
| ST928C | ROLLER SWAGING TOOL - BEARING SLEEVE (#ST928C) | 3 | |
| ST928H | STANDARD TOOL - BEARING REMOVE/INSTALL/SWAGE, SLEEVE OUTSIDE DIAMETER 1.33 THRU 2.25-INCH SLEEVE TYPE | 1 | |
| STD-1307 | TOOL – OVER-CENTERING, MLG UPLOCK HOOK (0.500” DIA X 24” METAL ROD, WITH PROTECTIVE RUBBER TUBING) | 1 | |
| STD-1312 | PULLER - BLIND HOLE BEARING, 0.2500 TO 1.0625 INCH | 1 | |
| STD-6111 | LOAD MEAUSRING DIVICE 0-1000 LB +-2 | 1 | |
| STP SCV08 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/4) | 1 | |
| STP SCV09 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 9/32) | 1 | |
| STP SCV10 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/16) | 1 | |
| STP SCV16 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/2) | 1 | |
| STP SCV20 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/8) | 1 | |
| STP SCV22 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 11/16) | 1 | |
| STP SCV24 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 3/4 ) | 1 | |
| STP SCV26 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 13/16) | 1 | |
| STP SCV28 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 7/8) | 1 | |
| STP SCV32 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1) | 1 | |
| STP SCV34 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/16) | 1 | |
| STP SCV36 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/8) | 1 | |
| STP SCV40 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/4) | 1 | |
| STW41562022 | STAHLWILLE 25AN RATCHET RING SPANNER 5/16″ X 11/32″ | 1 | |
| SUC 706 | NDT ENGINEERING. COPR./OLYMPUS NDT 5MHZ LONGITUDINAL (STRAIGHT BEAM) TRANSDUCER, 2.5” Ø ELEMENT .375” Ø CASE,.700” TALL, SUPPLIED WITH A SIDE MOUNTED MICRODOT CONNECTOR, INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE | 1 | |
| SW381 | REPL.BY W213-SPRING WASHER 5/16 | 3 | |
| SWE22630 | WRENCH NO.2 BEARING-NUT | 1 | |
| SWM12 | SPRING WASHER M12 | 1 | |
| T-16M200 | 16MM-2.00 SPLIT RING DIES1991M | 1 | |
| T-23676 | RETAINING RING PLIERS (NSN: 5120-00-876-7974) EATON | 1 | |
| T-24349 | BEARING PRESSING TOOL (255) | 1 | |
| T-24M300 | 24MM-3.00 SPLIT RING DIES1991M | 1 | |
| T-2880270 | BZ8250 SOLDERING TORCH KIT | 1 | |
| T-4331P | BEARINGSSEPARATOR23/8CAPPROTO | 1 | |
| T-61614-STC1 | .250 IN. NOMINAL EXT SPRING | 1 | |
| T-63417 | TAPE, MEASURING, 25 FT | 1 | |
| T-7088405 | 16-14 INSUL RING 6 STUD 25PK | 1 | |
| T-70885371 | 22-18AWG NO6 RING STUD 25PK | 1 | |
| T-70885405 | 16-14AWG NO6 RING STUD 25PK | 1 | |
| T-70885439 | 16-14AWG NO10 RING STUD 25PK | 1 | |
| T-70885454 | 16-14AWG 1/4 RING STUD 25PK | 1 | |
| T-70885504 | 12-10AWG NO10 RING STUD 25PK | 1 | |
| T-70885546 | 12-10 INSUL RING 3/8 STUD 25PK | 1 | |
| T-76938331 | 22-18 AWG NO6 RING STUD-100PK | 1 | |
| T-76938364 | 12-10 AWG 3/8 RING STUD-100PK | 1 | |
| T-76938380 | 12-10 AWG NO10 RING STUD-100PK | 1 | |
| T-ST3 | SOLDERING TIP .125W X .75L | 1 | |
| T-WP30 | SOLDERING IRON 30WATT 120V | 1 | |
| T0052920199 | WELLER WXP120 SOLDER PENCIL, 120W, 24V, FOR WX1 AND WX2 SOLDERING STATIONS | 1 | |
| T0052920199N | WELLER WXP120 SOLDER PENCIL, 120W, 24V, FOR WX1 AND WX2 SOLDERING STATIONS | 1 | |
| T0053402399N | WD1000 SOLDERING STATION, 230V - 80W | 1 | |
| T0053441399N | WD1000 SOLDERING STATION, 230V - 80W | 1 | |
| T101941 | MAST BEARING CLAMPING AND INSTALL TOOL (2) O | 1 | |
| T103164 | MAST BEARING REMOVAL TIE BOLT (2) O | 1 | |
| T3-10-14-125 | LIGHT SPRING T3-10-14-125 | 1 | |
| T3-2.2X3.2X8 | COMPRESSION SPRING ¿2.2 ID X ¿3.2 OD X 8 LENGHT | 1 | |
| T3-3.6X5X32 | SPRING TYPE 3 3.6X5X32 | 1 | |
| T33264 | LOCK RING REMOVER - ANTISKID TRANSDUCER - 737-200/300/400/500 | 10 | |
| T42315-72SC1-101 | SPRING COMPRESSOR, SHEAVE CROWDER, 1 EA • T42315-60SC1, SPRING COMPRESSION FIXTURE, 1 EA | 1 | |
| T46206 | TOOL FOR THE INSTALLATION AND REMOVAL OF THE BEARING CUPS. FOR ATA 32-49-35 | 1 | |
| T60 1001-C9-1A | TENSIOMETER - CABLE RANGE - 150-450 LBS FOR 1/8, 5/32, 3/16, 7/32 & 1/4 CABLES (OPTI MANUFACTURING CORPORATION) | 11 | |
| T60-1001-C8-1A | TENSIOMETER - CABLE RANGE - 10-200LBS FOR 1/16 3/32 1/8 CABLES, 30-200LBS FOR 5/32 & 3/16 CABLES, AND 80-200LBS FOR 7/32 (OPTI MANUFACTURING CORPORATION) | 27 | |
| T900123-1 | Bearing Staking Tool (2IT) | 1 | |
| T91-1 | PLIER RETAINING RING T91-1 TYPE ( 5120-00-612-9876 ) | 1 | |
| TAAI3-082700-01 | POWER SUPPLY WIRING TOOL P.NO: TAAI3-082700-01 | 1 | |
| TAY-151 | TIRE COVERS (no wheelpant faring) (set of 2) | 1 | |
| TB-270600S | BEARING HEATER 22 ELDI | 1 | |
| TB24 | TOW BAR: 24IN,W/PTEL RING, | 2 | |
| TB2456 | BOST-BRONZ BEARING THRUST TYPE 1"1/2IDX3"1/2OD | 1 | |
| TB3039G002 | Bearing Fitting Tool - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TB9056G001 | Driver - Clutch Bearings - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TB9057G001 | Support, G/B Clutch Bearings - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TB9058G001 | Pilot - G/B Clutch Bearings - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TB9064G001 | Driver - G/B Bearing, Pump - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TB9082G001 | DRIVER FAN BEARING TOOL (2IT) | 1 | |
| TC7-255S | NDT ENGINEERING. COPR./OLYMPUS NDT 5MHZ LONGITUDINAL (STRAIGHT BEAM) TRANSDUCER, 2.5” Ø ELEMENT .375” Ø CASE,.700” TALL, SUPPLIED WITH A SIDE MOUNTED MICRODOT CONNECTOR, INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE | 1 | |
| TDG-25 | Spare Ring, .250" diameter element | 1 | |
| TEK-1005 | Ring Reflection, 100Hz-5Khz, Special Radius, 1.0 OD x .425ID | 1 | |
| TEK-4000A | LOW FREQUENCY REFLECTION RING PROBE .840"Ø ID 1.205Ø " OD WITH A TRIAX FISCHER CONNECTOR, 900HZ-5KHZ. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| TEK-4056 | Special Ring Probe, .30" ID, .80" OD, 100Hz-8KHz, Reflection, NDT732A | 1 | |
| TEK-4057 | Ring Probe, 0.90" (22.86 mm} outside diameter, 0.53" (13.46 mm) inside diameter. 0.90" (22.86 mm) height, reflection. frequency range 50Hz-5KHz, Triax Connector | 1 | |
| TEK-4059-08A-4L | Reflection Ring Probe .31 IDx .87 OD, 250Hz-40KHz, 4 pin Lemo | 1 | |
| TEK-4059-10B-TF | RING (DONUT) PROBE, ABSOLUTE - REFLECTION, 250 HZ TO 40 KHZ FREQUENCY, ID .394 IN. (10.0 MM), OD .866 IN. (22.0 MM), HEIGHT .984 IN. (25.0 MM) (HOCKING NDT LIMITED OR EQUIVALENT) | 1 | |
| TEK-4064 | REFL Ring Probe, .880 ID 1.3 OD .9 high Triax 50-250Hz | 1 | |
| TEK-4065 | Special Ring Probe, .30 ID, 1-20KHz | 1 | |
| TEK-4069 | Special Low Frequency Ring Probe, .390ID, .750-.850OD, 1.0-1.2" H | 1 | |
| TEK-4076 | LF Ring probe, .5"OD, 1.125" OD, 500HZ-2K, 1" Height, w/battery operated LED, Triax Connector | 1 | |
| TEK-5129-T2 | 5 or 10MHz, 2.010 R, .5 MAX high (CUSTOMER PLEASE SPECIFY FREQUENCY WHEN ORDERING) | 1 | |
| TEK-5154 | Transducer, Boeing 35° in Alum and 42° in Alum, 1 ring (to fit collar/nut) plus 2 transducers | 1 | |
| TEKIT-5006/5007 | Transducer Assembly & Manipulating Fixture Set, Includes all items per 767 PT4 57-50-05 PG9 FIG4, TEK-5006,TEK-5006-C1,TEK-5006-C2, TEK-5007, TEK-5007-C1, Manipulating Rod, Syringe, Cable, Couplant & 1450 Pelican Case *Does not include NDT694 & NDT695 | 1 | |
| TF-243624 | TEMPERINGFURNACE(ELECTRIC42KW 5HP)1 | 1 | |
| TGUA013 | Bowers TGUA013 Universal 20mm Disc Anvils for Measuring Grooves (Pair) | 1 | |
| TGUA014 | Bowers TGUA014 Universal 12mm Disc Anvils Int/Ext for Measuring Grooves (Pair) | 1 | |
| TGUA020 | Bowers TGUA020 Universal Cone Anvils for Measuring Hole Centre Distance Dimn 25mm (Pair) | 1 | |
| TGUA021 | Bowers TGUA021 Universal Cone Anvils for Measuring Hole Centre Distance Dimn 50mm (Pair) | 1 | |
| TGUA025 | Bowers TGUA025 Universal Small Dia 6mm Measuring Anvils (Pair) | 1 | |
| TH53R | BAC TH-53R Tow-Bar, 80 to 94 in L, Ring 2 in Telescoping, Powder-Coated, Orange | 3 | |
| TH6R | BAC TH-6R Tow-Bar, 74 in L, Ring 2 in Fixed, Powder-Coated, Orange, For Aircrafts | 2 | |
| THTPMA25EM | 25 FT MEASURING TAPE | 1 | |
| TM3037G001 | PERMEABILITY MEASURING TOOL - 72-43-10-200-803 | 2 | |
| TM5244G001 | H125 OILING MEASURING TOOL | 2 | |
| TMH CR15-21-08 | RING #2 | 2 | |
| TMH TBC45-53-04 | Spring 21 inches | 1 | |
| TMH TBC50-60-00 | TOWBAR A319/320/321 REVOLVING TOWRING | 1 | |
| TMHTB081000 | STEERING BAR ATR42/72 | 1 | |
| TO-20-030 | SPRING SCALE CAPACITY 5.4 DAN (12 LBF) | 1 | |
| TO-20-040 | SPRING SCALE - CAPACITY 25 DAN (60 LBF) CH 20 STANDART PRACTICA AIRFRAME | 1 | |
| TO-20-059 | SPRING SCALE CAPACITY 1 DAN (2.2 LBF) | 1 | |
| TO-20-070 | SPRING SCALE 60DAN/120LBS | 1 | |
| TO-20-30 | SPRING SCALE - CAPACITY 5.4 DAN (12 LBF) | 1 | |
| TO-20-960 | SPRING SCALE 10DAN/22,5LBS | 1 | |
| TORKEL 860 | INDUSTRIAL BATTERY LOAD UNIT SUITABLE FOR MEASURING BATTERY VOLTAGE UPTO 420V. | 1 | |
| TOWBAR - AIRPLANE, TOWING AND STEERING01-1246-0010 | TOWBAR - AIRPLANE, TOWING AND STEERING01-1246-001 | 1 | |
| TPMA25 | MEASURING TAPE 25FT | 1 | |
| TR34R | BAC TR-34R Tow-Bar, 84 to 104 in L, Ring 2-1/4 in Telescoping, Powder-Coated, Orange, For Aircrafts | 4 | |
| TR34SR | BAC TR-34SR Tow-Bar, 90 to 112 in L, Shock Ring, Powder-Coated, Orange, For Aircrafts | 4 | |
| TR34SRW | TOWBAR: W/SHOCK RING & WHEELS, 112IN,WT 48LB,1 | 1 | |
| TR6R | TOWBAR: TAIL WHEEL,12FT, W/RING HITCH | 2 | |
| TRDG-12 | Replacement Spare Ring, .125" Diameter | 1 | |
| TRDG-25 | Replacement Spare Ring, .250" Diameter | 1 | |
| TSJ65B82591 | TEST FITTING ASSY - HYDRAULIC ACTUATOR ASSY, NOSE GEAR STEERING, BODY CRES 2 5/8 DIA. X 2 3/4 | 2 | |
| TT-TB2000-LS/PM-SP | TT-TB2000-LS/PM-SP;Self-Paced - TB2000 Configuring Light Source - Power Meter - 10 minutes | 1 | |
| TT-TB2000-SOFTWARE-SP | TT-TB2000-SOFTWARE-SP;Self-Paced - TB2000 Transferring Files - Updating Software - 25 minutes | 1 | |
| TW02 | Ionic Systems Trolley Wheels, Blue Centre With Bearings BZWPPR260204D/BLUE | 2 | |
| TYPE0117 | RATCHET RING 1-1/2" | 1 | |
| U15A270000A | TOOLS KIT FOR AILERON AND FLAP LINKAGE BEARING CONVERSION (PART NO U15A270000A), (COMP) | 1 | |
| U8010015 | RIGHT ANGLE MIA PROBE, SMALL 6.35 MM (0.25") TIP DIAMETER, REQUIRES BMM-H (U8770417) FOR SPRING LOAD | 1 | |
| U8010039 | SPO-5629PHV 1/2 X 1/2 BI-MORPH HIGH VOLTAGE PITCH CATCH, BROADBAND FREQUENCY, HIGH VOLTAGE, SPRING L | 1 | |
| U8202510 | THICKNESS GAUGE ;DIGITAL ;MEASURING PRINCIPLE: ULTRASOUND ;MEASURING RANGE: 0.5 TO 635 MM. TYPE: OLYMPUS 27MG | 1 | |
| U8770335 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 | |
| U8770416 | SPRING LOADED TRASDUCER HOLDER. FITS V260-SM SONOPEN | 1 | |
| U8800581 | SPECIAL TOOLS (1) USE A NONCONDUCTIVE STRAIGHTEDGE DURING CALIBRATION AND THE INSPECTION (FOR SCAN ROWS 1 AND 4). (2) USE A CIRCLE TEMPLATE DURING THE INSPECTION TO DO SEMICIRCULAR SCANS AROUND THE RIVETS (FOR SCAN ROWS 2 AND 3). (S.NO: MGAT/NDT/001) | 1 | |
| ULR12 | Bowers ULR12 Ultima Setting Ring 12mm 0.472" | 1 | |
| ULR120 | Bowers ULR120 Ultima Setting Ring 120mm / 4.725" | 1 | |
| ULR2 | Bowers ULR2 Ultima Setting Ring 2.5mm / 0.098" | 1 | |
| ULR200 | Bowers ULR200 Ultima Setting Ring 200mm / 7.875" | 1 | |
| ULR220 | Bowers ULR220 Ultima Setting Ring 220mm / 8.661" | 1 | |
| ULR24 | Bowers ULR24 Ultima Setting Ring 24mm / 0.945" | 1 | |
| ULR240 | Bowers ULR240 Ultima Setting Ring 240mm / 9.449" | 1 | |
| ULR260 | Bowers ULR260 Ultima Setting Ring 260mm / 10.236" | 1 | |
| ULR280 | Bowers ULR280 Ultima Setting Ring 280mm / 11.024" | 1 | |
| ULR32 | Bowers ULR32 Ultima Setting Ring 32mm / 1.260" | 1 | |
| ULR60 | Bowers ULR60 Ultima Setting Ring 60mm / 2.360" | 1 | |
| UPTC16MLT | SPRING CLAW, FLEXIBLE, LIGHTED, 25-11/16" LONG (BLUE-POINT®) | 1 | |
| UR 5.4SS-SL | Universal O-ring Scanner Probe, 5.4mm Dia. x 35mm WL, 100KHz-2MHz, Stainless Steel, .059" to coil center | 1 | |
| URL-260 | LONG "Soaring" WING TIP COVERS (connects with velcro), ALL YEAR USE (set of 2) | 1 | |
| URXKIT-109 | Unirotor X-probe Kit, 9 probes covering.187" thru 1.0", Pelican 1200 | 1 | |
| UV-SP-DM365XA | SPECTRO-UV DM-365XA UV RADIOMETER, INCLUDES 4 NON-RECHARGEABLE 1.5 VOLT ALKALINE BATTERIES, BATTERY LEVEL INDICATOR LIGHT AND CALIBRATION CERTIFICATE. MEASURING RANGE: 0-19,990 MICROWATTS PER CM2 | 1 | |
| V21H | Ionic Systems Vertigo 21 Handle Section With Clamp And Butt Ring | 2 | |
| V24H | Ionic Systems Vertigo 24 Handle Section With Clamp And Butt Ring | 2 | |
| V25H | Ionic Systems Vertigo 25 Handle Section With Clamp And Butt Ring | 2 | |
| V28H | Ionic Systems Vertigo 28 Handle Section With Clamp And Butt Ring | 2 | |
| V32H | Ionic Systems Vertigo 32 Handle Section With Clamp And Butt Ring | 2 | |
| V33463 | Bearing Removal tool (2 IT) | 1 | |
| V701258B | THREADMEASURING WIRE(0.07217) | 1 | |
| V701258W | THREADMEASURING WIRE(0.07217) | 1 | |
| VMS1200 | Vertex VMS1200 Vertical Measuring System 1200 Height Gauge | 1 | |
| VO894-912 | ORING POUR 12-8F50G5-S | 1 | |
| VTB08050P05 | BEARING (1/2 OVERSIZE) | 1 | |
| WE1010 | SOLDERING STATION 70W/230V | 1 | |
| WE1010NA | SOLDERING STATION, 50W, 120V | 1 | |
| WELSP40L | SOLDERING IRON 240 VOLTS | 1 | |
| WPSI12V | BATTERY SOLDERING IRON WELLA (12V) | 1 | |
| WST 0841 | HELICOIL THREAD REPAIR KIT THREAD REPAIRING WORKSHOP KITS (M5 M6 M8 M10 M12) - 140 PCS | RAPI-COIL® | 1 | |
| WXD 2 CONTROL UNIT | 230V UK F/G WELLER DESOLDERING STATION | 1 | |
| WXD2020 | 2 CHANNEL SOLDER AND DESOLDERING STATION, 200 W (255 W) | 1 | |
| XB1618A | 1/2" X 9/16" OFF SET RING SPANNER WRENCH | 1 | |
| XCL2 | Needle Nose Spring Clamps (Jaw reach: 2" (51 mm)) (Jaw gap: 2" (51 mm)) (Add to cart: Add To Cart) | 1 | |
| XCL5 | Needle Nose Spring Clamps (Jaw reach: 2" (51 mm)) (Jaw gap: 2" (51 mm)) (Add to cart: Add To Cart) (Jaw reach: 4" (102 mm)) (Jaw gap: 3" (76 mm)) (Add to cart: Add To Cart) | 1 | |
| XCR-4PC | 4 PC Round Jaw Ratchet Spring (Jaw reach: 2-1/2" (64 mm)) (Jaw gap: 2" (51 mm)) (Add to cart: Item is no longer available.) | 1 | |
| XCRU3 | Square Jaw Ratchet Spring Clamps (Jaw reach: 2" (51 mm)) (Jaw gap: 2" (51 mm)) (Add to cart: Add To Cart) | 1 | |
| XCRU5 | Square Jaw Ratchet Spring Clamps (Jaw reach: 2" (51 mm)) (Jaw gap: 2" (51 mm)) (Add to cart: Add To Cart) (Jaw reach: 4" (102 mm)) (Jaw gap: 4" (102 mm)) (Add to cart: Add To Cart) | 1 | |
| XDH1618A | 1/2" X9/16" RING SPANNER | 1 | |
| XID1618A | RING KEY (XID1618A ¼ ⁕ 9/32) | 1 | |
| XO810 | DOUBLE RING WRENCH, STANDARD LENGTH DEEP 60O OFFSET, 12 POINT, SIZE 1/4"X5/16&RDQUO; | 1 | |
| XS1618A | RING WRENCH I/2 X 9/16 | 2 | |
| XTR125M | Bowers XTR125M XT Setting Ring 125mm | 1 | |
| XTR125i | Bowers XTR125i XT Setting Ring 5" | 1 | |
| XTR12M | Bowers XTR12M XT Setting Ring 12.5mm | 1 | |
| XTR12i | Bowers XTR12i XT Setting Ring 1/2" | 1 | |
| XTR20M | Bowers XTR20M XT Setting Ring 20mm | 1 | |
| XTR20i | Bowers XTR20i XT Setting Ring 3/4" | 1 | |
| XTR225M | Bowers XTR225M XT Setting Ring 225mm | 1 | |
| XTR225i | Bowers XTR225i XT Setting Ring 9" | 1 | |
| XTR275M | Bowers XTR275M XT Setting Ring 275mm | 1 | |
| XTR275i | Bowers XTR275i XT Setting Ring 11" | 1 | |
| XTR3M | Bowers XTR3M XT Setting Ring 2.5mm | 1 | |
| XTR65i | Bowers XTR65i XT Setting Ring 2.5/8" | 1 | |
| XTR7i | Bowers XTR7i XT Setting Ring 0.2000" | 1 | |
| XV3-50 | Bessey® VarioClippix® Sliding Arm Spring Clamps (Jaw gap: 2-1/8" (54 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Single Sliding Arm) (Add to cart: Add To Cart) | 1 | |
| XV5-100 | Bessey® VarioClippix® Sliding Arm Spring Clamps (Jaw gap: 2-1/8" (54 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Single Sliding Arm) (Add to cart: Add To Cart) (Jaw gap: 4" (102 mm)) (Jaw reach: 2" (51 mm)) (Type: Single Sliding Arm) (Add to cart: Add To Cart | 1 | |
| XV5-170 | Bessey® VarioClippix® Sliding Arm Spring Clamps (Jaw gap: 2-1/8" (54 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Single Sliding Arm) (Add to cart: Add To Cart) (Jaw gap: 4" (102 mm)) (Jaw reach: 2" (51 mm)) (Type: Single Sliding Arm) (Add to cart: Add To Cart | 1 | |
| YA145-2 | COM-7293 PICK - O-RING, 90-DEGREE TIP | 6 | |
| YA751 | 12IN 1/8IN NPT HOSE W SPRING | 3 | |
| Z-1063-12 | RING, BEADBREAKER, 12 | 1 | |
| Z-1064-12 | RING, BEADBREAKER, 12 | 3 | |
| Z-1064-20 | RING, BEADBREAKER, 20 | 2 | |
| Z-3072-20 | RING, BEADBREAKER, 20 | 3 | |
| Z-3072-22 | RING, BEADBREAKER, 22 | 2 | |
| ZAXN2052 | THRUST ROLLER BEARING ¿52mmOD X ¿20mmID | 1 | |
| В-676-101 | SHEARING PIN FOR MODIFICATION TO TOW DRIVER (TOWA320-C-6) | 1 | |
| 98A57304000000 | PROTECTIVE RING,WING MANHOLES RIBS 2-22, | 1 | |
| 98A57304000001 | PROTECTIVE RING,WING MANHOLES RIBS 2-22, | 1 | |
| 98A57304000002 | PROTECTIVE RING,WING MANHOLES RIBS 2-22, | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
