| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| B20003-27 | RIG PIN A 1 | 4 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0U190360 | PIN-RIGGING,THS ACTUATOR,MECHANICAL INPUT LEVER (0U190360) | 31 | |
| 11779 | BURR-OFF ORIGINAL CLOTHESPIN HOLE SZE=.203-.21 | 1 | |
| 1013196 | T.R.C.P. RIG PIN DIA. 0.1850" & 2.00" LENGTH RB211 | 1 | |
| 10600-910A | Spin Rig Adaptation & Tooling for 1701422 and 769437 Series Rotors | 1 | |
| 2370-T050-401 | GSE 118 FREE-FALL SYSTEM AND NLG DOOR RIGGING PINS SET | 7 | |
| 28-0-3960 | F100 RIG PIN SET BRAKE SY | 1 | |
| 28-0-4102 | F100 RIGGING PIN ELEVATOR | 2 | |
| 28-0-4571 | F100 RIGGING PIN SET PAX | 1 | |
| 2C90531G01 | PIN RIG, ACT RING, STAGE 1 & 2 | 1 | |
| 330A97-2100-00 | 4 MM (.16IN) DIA. RIGGING PIN | 1 | |
| 3402780-69 | RIG PIN (1/4-INCH DIAMETER); INCLUDED IN RIG PIN SET | 1 | |
| 3A2140 | LARGE RIGHT ANGLE REVERSIBLE DRILL 0.80 HP 300 RPM 1/2-20 SPINDLE THREAD - SIOUX | 1 | |
| 3G6705G00132 | AW139 MAIN ROTOR & TAIL ROTOR RIGGING PIN KIT | 1 | |
| 701-2978000 | KIT PIN - RIGGING (A321) | 32 | |
| 95-92015-0001 | PIN GROUND SAFETY ENGINE CONTROL RIGGING SET TO CA-A-GE-71-02-00A-066A-A | 1 | |
| 98A27003001000 | RIGGING PIN (98A27003001000) | 29 | |
| 98A27307547000 | RIGGING PIN A310 | 6 | |
| 98A27504032000 | RIGGING PINS A-J [10] | 9 | |
| 98A275080031000 | RIGGING PIN-FLAP TRACK 1 | 1 | |
| 98A52307587000 | PIN RIGGING-CARGO DOOR,LATCHING MECHANISM AMM: 52-31-00-720-801 | 16 | |
| 98D27207546000 | Pin riggingbel crk assy actuator 1 | 27 | |
| 98D27207547000 | RUDDER CABLE RIGGING PIN #NAME? 19>20 | 32 | |
| 98D27207549000 | YAW DAMPER RIGGING PIN - POSITION 21>22 | 31 | |
| 98D2750400500 | PIN RIGGING-FLAPS (TRACK 1) | 1 | |
| 98D27504005000 | PIN RIGGING-FLAPS (TRACK 1) | 24 | |
| 98D27504031000 | FLAP RIGGING PIN - POSITION 12+13 | 25 | |
| 98D27508625040 | RIG PIN TRACK 1 TOOL | 2 | |
| 98D27508625042 | RIG PIN TRACK 1 + 4 TOOL | 6 | |
| 98DNSA20208040 | 01 EA RIGGING PIN PN 98DNSA20208040 | 31 | |
| 98F27207514000 | Pin rigging-bell crank assy-actuator no1 | 13 | |
| 98F27208312 | PIN RIGGING BELL CRANK ASSY-ACTUATOR NO.1 | 1 | |
| 98F27208312000 | Pin rigging-bell crank assy-actuator NO1 | 17 | |
| 98F52308355000 | PIN-RIGGING,CARGO DOOR SEQUENCE LEVER TEM:52-31-11 | 11 | |
| 98F52308356000 | PIN-RIGGING,CARGO DOOR,INTERLOCK MECHANISM TEM:52-31-11 | 11 | |
| 98F52308357000 | PIN RIGGING-CARGO DOOR,LATCHING MECHANISM TEM:52-31-11 | 11 | |
| 98F52308358000 | PIN-RIGGING,CARGO DOOR LATCHING MECHANISM AMM:52-32-11-501 | 10 | |
| 99A76101003000 | 99A76101003000 PIN - RIGGING - THROTTLE CONTROL MICROSWITCH UNIT | 5 | |
| A20004-12 | RIG PIN LGE1, LGE2, CDF1, CDF2, R8, CDA1, CDA2 | 4 | |
| A20004-14 | RIG PIN LGA4, NS1, NS7, R3, R6, R7 | 5 | |
| A20004-15 | RIG PIN LGE3, LGA1, A1, A8, A11, A14, A17, A18, ST1, ST2, ST3, A19,A20, E5, E6, CDF-4, CDA-3, CDA-4 | 1 | |
| A20004-16 | RIG PIN D1, D2, A16, NS3 | 2 | |
| A20004-17 | RIG PIN ST5, LE1, A2, A10, E3, E4, E11, ST4, LGB3, LGB4 | 4 | |
| A20004-20 | RIG PIN LGA3, A7, A13, R4 | 7 | |
| A20004-21 | RIG PIN A12, E7, E8, E9, E10 | 7 | |
| A20004-22 | RIG PIN NS2, A3, A5, A6, A9, A15, E1 | 6 | |
| A20004-25 | RIG PIN R1, R2 (DIAMETER: 0.311 IN. LENGTH: 12.00 IN.) | 6 | |
| A20004-78 | SET - RIG PIN RIGGING TOOL (A20004-10 IS INCLUDED IN A20004-78) | 23 | |
| A4-1131-1 | RIG PIN MLG QUADRANT - NLG TORQUE (SAME AS SK5971) | 1 | |
| A52031-2 | 0.1875 Rigging Pin Assy | 1 | |
| A52031-3 | 0.3125 Rigging Pin Assy | 1 | |
| AB27001-T3V | PIN RIGGING-FLAPS (TRACK 1) | 1 | |
| ACN16-TFR6-B | CABLE -, NORTEC 16 PIN LEMO TO TRIAX FISCHER/LEMO CONNECTOR RIGHT ANGLE, BRIDGE COIL CONFIGURATION. 6FT, NORTEC 500-2000 SERIES INSTRUMENTS. Includes Certificate of Conformance. | 1 | |
| ACN16-TFR6-R | CABLE - 16 PIN TO 90°. RIGHT ANGLE TRIAX FISHER CONNECTOR REFLECTION | 1 | |
| ACP2D-2SMD6R-R | CABLE -12 PIN LEMO TO 2 SINGLE RIGHT ANGLE MICRODOT CONNECTORS, 6.0' FT LONG REFLECTION. Includes Certificate of Conformance. (SPO-4139) | 1 | |
| AF-4192/4F | LOW FREQUENCY REFLECTION PROBE .31"Ø OD .700" TALL , 800Hz-20KHz, RIGHT ANGLE STEM WITH 4 PIN FISHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4193/4F | LOW FREQUENCY REFLECTION SPOT PROBE. TIP DIAMETER OF.500"Ø(12.7mm), BODY DIAMETER OF (14.80mmØ, ), 1.600 "(41.0mm) HIGH, 1-30KHz, 90° DEGREES (RIGHT ANGLE) 4 PIN FISHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4228/4F | Rigid Surface probe, Absolute Reflection, 90° Degrees, Shielded, .125"Ø tubing with a 4mm(.156") diameter tip, .300" Drop with a 70mm(2.75") Shaft Length and 3.0" Long Handle for a total Length of 5.75" Long Supplied with a 4 Pin Fischer Connector. Freque | 1 | |
| AGE-01411-401 | KIT RIGGING PINS, FLIGHT CONTROLS FOR EMBRAER 190 | 1 | |
| AGE-01625-401 | PIN-RIGGING, RUDDER PEDAL ASSY (PART OF 170 GSE-233) | 1 | |
| AGE-01746-401 | GSE 215 PIN - RIGGING, PRKG / EMERGENCY BRAKE SYSTEM | 4 | |
| AGE-04265-403 | KIT RIGGING PINS, FLIGHT CONTROLS FOR EMBRAER 190 | 10 | |
| AP-4-100K-600K/4L | RIGID SURFACE PROBE, STRAIGHT, .250"Ø TIP, 5.0" LONG, 100-600KHz , SUPPLIED WITH A 4 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AP-45-5-100K-600K/4L | RIGID SURFACE PROBE .187'Ø TIP, 5.0" LONG, 45° CRANK, .500" DROP 100-600KHz , SUPPLIED WITH A 4 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AP-45-5-600K-2M/4L | RIGID SURFACE PROBE .187'Ø TIP, 5.0" LONG, 45° CRANK, .500" DROP 600KHz-2MHz , SUPPLIED WITH A 4 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AP-7/4F | STRAIGHT SHAFT RIGID SURFACE PROBE, ABSOLUTE SHIELDED, .187"Ø 50-500KHz SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 4.5" WORKING LENGTH WITH A 7.0" OVERALL LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AP-94-6/4L/1-30KHZ | RIGID SURFACE PROBE, DIFFERENTIAL 90° 1-30KHZ , .187"Ø OD TIP, .400" DROP, 6.0" LONG, 4 PIN LEMO CONNECTOR. Includes Certification Report and Certificate of Conformance. | 1 | |
| APN-4.5/2MHZ/4F | RIGID SURFACE PROBE STRAIGHT, ABSOLUTE SHIELDED, 1-3MHz, CENTER FREQUENCY = 2MHz, 4.5" LONG SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-475-4.5/2MHZ/4F | RIGID SURFACE PROBE .125"Ø TIP, 4.5" LONG, 45° CRANK, .750" DROP 1-3MHZ, CENTER FREQUENCY = 2MHz SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-475-4.5/L500/4F | RIGID SURFACE PROBE .125"Ø TIP, 4.5" LONG, 45° CRANK, .750" DROP 500KHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-7/4F | STRAIGHT SHAFT RIGID SURFACE PROBE, ABSOLUTE SHIELDED, .125"Ø 50-500KHz SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 4.5" WORKING LENGTH WITH A 7.0" OVERALL LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-9/7L/500KHZ-1MHZ | RIGID STRAIGHT SURFACE PROBE BRIDGE / ABSOLUTE SHIELDED, 500KHz-1MHz, .125"OD TIP. SUPPLIED WITH A 7 PIN LEMO POWERLINK CONNECTOR, 6.0" LONG. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-903-3/4L | RIGID SURFACE PROBE ABSOLUTE SHIELED, 20-200KHz, .125"Ø TUBING 90° DEGREES , .030" DROP 3.0" LONG WITH 4 PIN LEMO CONNECTOR 20-200KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-903-6/500K/7L | Absolute Shielded / Bridge Pencil Probe. , 200 kHz - 1 MHz with a center frequency of 500 kHz, Right Angle Shaft, 0.03 in. (0.76 mm) drop with a 0.125 in. diameter tip. 6 in. overall length supplied with a 7 Pin Fischer/LEMO "PowerLink" connector. Includ | 1 | |
| APN-903-6/7L | RIGID SURFACE PROBE 50-500KHz, .030 DROP, .125 Ø TIP, 6.0" LONG, 7 PIN LEMO OB SIZE. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-91-6/7L-200K | Rigid surface probe, ABS. 6 inch (15.2cm) overall length with 0.1 inch (2.54mm) drop at the tip. Frequency 200kHz -1MHz, Supplied with a 7 pin LEMO connector. Includes Test Report and Certifiacte of Conformance. | 1 | |
| APN-92-6/7L/200KHZ-1MHZ | Rigid surface probe, ABS. 6 inch (15.2cm) overall length with 0.2 inch (5.08mm) drop at the tip. Frequency 200kHz -1MHz, Supplied with a 7 pin LEMO connector. Includes Test Report and Certifiacte of Conformance. 9403408 | 1 | |
| APN-925-5/2MHZ/4F | RIGID SURFACE PROBE 90° DEGREES, 1-3MHz, .250" DROP, 1-3MHz, CENTER FREQUENCY = 2MHz, 5.0" LONG SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-925-5/L500K/4F | RIGID SURFACE PROBE 90° DEGREES, 1-3MHz, .250" DROP, 500kHz, 5.0" LONG SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-925-6B/7L | RIGID SURFACE PROBE 50-500KHZ, 90 DEGREE, .125" OD, .250" DROP, 6.0" LONG, BENT, 7PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-93-6/7L/500KHZ | RIGID SURFACE PROBE 200KHz-1MHz, 90 DEGREE, .125" OD, .300" DROP, 6.0" LONG, POWER LINK 7 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-95-10/7L | ABSOLUTE BRIDGE RIGHT ANGLE. 10.0” LONG. 100KHZ-500KHZ. 0.125IN. (3.17MM) SHAFT SIZE. 7-Pin-LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance..... | 1 | |
| APN-95-3.5/7L | RIGID SURFACE PROBE 50-500KHZ, 90 DEGREE, .125" OD, .500" DROP, 3.5" LONG, 7 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-95-6/7L | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 50 kHz - 500 kHz and has a center frequency of 200 kHz, Right Angle Shaft, 0.50 in. (12.7 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. I | 1 | |
| APN-95-6C/7L | RIGID SURFACE PROBE 50-500KHz, 90 DEGREE, .125" OD, .500" DROP, 6.0" LONG, CURVE, 7 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-95-8/7L | RIGID SURFACE PROBE ABS 90° DEGREES, .500" DROP, .125"Ø O.D. TIP, 8.0" LONG. 50-500KHz.. 7 PIN LEMO CONNECTOR . Includes Test Report and Certificate of Conformance. | 1 | |
| ASPN-95-5B/7L | RIGID SURFACE PROBE 50-500KHz, 90 DEGREE, .250" DROP, .125"OD WITH A 0.092"OD TIP, 5.0" LONG, SUPPLIED WITH A 7 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATPN-45-5/7L | RIGID SURFACE PROBE 50-500KHz, 45 DEGREE. .500" DROP, .125"OD, 5.0" LONG, 7 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATPN-92-6/7L | RIGID SURFACE PROBE 50-500KHz, .125"OD, 90 DEGREE, .200" DROP, 6.0" LONG, 7 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATPN-92-6/7L/2MHZ | RIGID SURFACE PROBE 1-3MHz, .125"OD, 90 DEGREE, .200" DROP, 6.0" LONG, 7 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATPN-95-5/7L | RIGID SURFACE PROBE 50-500KHz, .125"OD, 90 DEGREE, .500" DROP, 5.0" LONG, 7 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATPN-95-5/7L/6MHZ | RIGID SURFACE PROBE 6MHz, .125"OD, 90 DEGREE, .500" DROP, 5.0" LONG, 7 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATPN-95-5/800KHZ | RIGID SURFACE PROBE 800KHz, .125"OD, 90 DEGREE, .500" DROP, 5.0" LONG, 7 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATPN-95-6C/7L | RIGID SURFACE PROBE 50-500KHz, .125"OD, 90 DEGREE, .500" CURVE, 6.0" LONG, 7 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATPN-95-6C/7L-200K-1M | RIGID SURFACE PROBE 200KHz-1MHz, .125"OD, 90 DEGREE, .500" CURVE, 6.0" LONG, 7 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATPNR-95-6/7L | RIGID SURFACE PROBE, POWERLINK ABS/REFLECTION 90° DEGREES, .500" DROP, .125"Ø O.D. TIP, 6.0" LONG 7 PIN LEMO CONNECTOR 50-500KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AZL03724-R00 | RIGGING PIN 98A32301000000 AT THE PIN 4 POSITION IN THE NLG DOOR UPLOCK | 1 | |
| B20003-10 | 3/16DIA X 6.0 RIG PIN TOOL | 5 | |
| B20003-11 | 1/4DIA X 2.5 RIG PIN TOOL | 5 | |
| B20003-12 | 5/16DIA X 1.5 RIG PIN TOOL | 4 | |
| B20003-13 | 5/16DIA X 1.75 RIG PIN TOOL | 4 | |
| B20003-14 | RB211-535 Engine Rigging Pin Assy | 5 | |
| B20003-15 | 5/16DIA X 2.0 RIG PIN TOOL | 5 | |
| B20003-16 | 5/16DIA X 2.5 RIG PIN TOOL | 4 | |
| B20003-17 | 5/16DIA X 2.75 RIG PIN TOOL | 4 | |
| B20003-18 | 5/16DIA X 3.0 RIGPIN TOOL | 4 | |
| B20003-19 | 5/16DIA X 3.25 RIG PIN TOOL | 3 | |
| B20003-20 | 5/16DIA X 4.0 RIG PIN TOOL | 3 | |
| B20003-21 | RIG PIN 5/16"DIA X 6" LONG | 8 | |
| B20003-22 | 5/16DIA X 6.75 RIG PIN TOOL | 4 | |
| B20003-23 | 5/16DIA X 7.0 RIG PIN TOOL | 5 | |
| B20003-24 | 5/16DIA X 8.0 RIG PIN TOOL | 4 | |
| B20003-25 | 5/16DIA X 10.0 RIG PIN TOOL | 3 | |
| B20003-26 | 5/16DIA X 10.25 RIG PIN TOOL | 3 | |
| B20003-27 | 5/16DIA X 11.0 RIG PIN TOOL | 4 | |
| B20003-28 | 5/16DIA X 12.0 RIG PIN TOOL | 3 | |
| B20003-29 | RB211-535 Engine Rigging Pin Assy | 8 | |
| B20003-3 | 5/16DIA X 1.5 RIG PIN TOOL | 5 | |
| B20003-4 | 5/16DIA X 1.5 RIG PIN TOOL | 4 | |
| B20003-5 | 5/16DIA X 3.0 RIG PIN TOOL | 3 | |
| B20003-53 | 5/16DIA X 3.0 RIG PIN TOOL | 4 | |
| B20003-54 | .061"DIA X 2.8 RIG PIN TOOL | 4 | |
| B20003-6 | 3/16DIA X 2.0 RIG PIN TOOL | 4 | |
| B20003-61 | 1/4DIA X 3.5 RIG PIN TOOL | 4 | |
| B20003-67 | RIG PIN AT 1 | 3 | |
| B20003-7 | 3/16DIA X 2.5 RIG PIN TOOL | 4 | |
| B20003-8 | 3/16DIA X 4.0 RIG PIN TOOL | 4 | |
| B20003-80 | 5/16DIA X 1.5 RIG PIN TOOL | 3 | |
| B20003-9 | 3/16DIA X 5.0 RIG PIN TOOL | 4 | |
| C76001-10 | RIGGING PIN - 737-300/400/500 - AIRPLANES L/N 1360 AND ON, WITH HOLE IN COWL (-300 WITH PRR34105 INCORPORATED) | 19 | |
| C76001-11 | RIGGING PIN - 737-300 AIRPLANES THRU L/N 1359 ONLY, WITHOUT HOLE IN | 7 | |
| C76001-12 | RIGGING PIN - 737-300/400/500 - AIRPLANES L/N 1360 AND ON, WITH HOLE IN COWL (-300 WITH PRR34105 INCORPORATED) | 10 | |
| C76001-9 | RIGGING PIN - 737-300 AIRPLANES THRU L/N 1359 ONLY, WITHOUT HOLE IN | 8 | |
| CP-11 | BURR-OFF "ORIGINAL CLOTHESPIN" HOLE SZE=.172-.188 SHK=.171 LG | 2 | |
| CP-13 | BURR-OFF "ORIGINAL CLOTHESPIN" HOLE SZE=.203-.219 SHK=.202 LG | 2 | |
| CP-14 | BURR-OFF "ORIGINAL CLOTHESPIN" HOLE SZE=.219-.234 SHK=.218 LG | 1 | |
| CP12 | BURR-OFF "ORIGINAL CLOTHESPIN" HOLE SZE=.187-.203 SHK=.186 LG | 2 | |
| F70207-109 | SPL-1585 Kit - Rigging Pins, All Systems 737-600, -700, -800 | 26 | |
| F70207-128 | Kit-Rigging Pins,AllSystems- For line no > 1376 | 20 | |
| F70207-26 | RIG PIN 3/16" DIA X 4.8" | 1 | |
| F70207-39 | RIG PIN 5/8"DIA X 1.8" | 1 | |
| F70207-58 | RIG PIN 3/16"DIA X 10.8" | 1 | |
| F70207-86 | RIG PIN 5/16DIA X 3.4"LEN | 1 | |
| G12001-4 | RIG PIN ASSY, PART ITEM OF G12001-60 | 5 | |
| G12001-60 | RIG PIN KIT (G12001-60 CONTAINS ALL RIG PINS IISTED IN G12001-47) | 8 | |
| GSB2700008 | KIT, PIN RIGGING DASH8-100 | 6 | |
| GSE 233-190 | KIT RIGGING PINS, FLIGHT CONTROLS FOR EMBRAER 190 | 1 | |
| GSE233 | KIT RIGGING PINS, FLIGHT CONTROLS FOR EMBRAER 190 | 1 | |
| HC131H0028-000 | RIGGING PIN 1, AUTOTHROTTLE CLUTCH. | 1 | |
| IAE 1R18254 | IAE 1R18254 RIGGING PIN | 24 | |
| IAE 1R18282 | IAE 1R18282 RIGGING PIN | 23 | |
| IAE1P16614 | 1EA/RIGGING PIN | 6 | |
| IAE1R18247 | rigging pin (alt to 1R18423( | 1 | |
| IAE1R18254 | 1 EA/RIGGING PIN | 24 | |
| IAE1R18282 | IAE1R18282 PIN, RIGGING | 23 | |
| J20003-15 | RIG PIN ASSEMBLY - R1,R2 (PART OF J20003-34) | 5 | |
| K20009-14 | PIN - RIG (K20009-3 ASSEMBLY INCLUDED IN KIT K20009-1) | 9 | |
| MS20392-2P176 | RIG PIN, 0.1840 - 0.1860 IN. DIA, 5.50 IN. MINIMUM LENGTH | 1 | |
| MW310-15R | Moore & Wright MW310-15R Micrometer Head Spherical Spindle Range 0-15mm Resolution 0.01mm | 1 | |
| MW725-01 | Moore & Wright Pin Gauge Set 51pce 0.50-1.00x.01mm | 1 | |
| MW725-02 | Moore & Wright Pin Gauge Set 100pce 1.01-2.00x.01mm | 1 | |
| MW725-03 | Moore & Wright Pin Gauge Set 100pce 2.01-3.00x.01mm | 1 | |
| MW725-04 | Moore & Wright Pin Gauge Set 100pce 3.01-4.00x.01mm | 1 | |
| MW725-05 | Moore & Wright Pin Gauge Set 100pce 4.01-5.00x.01mm | 1 | |
| MW725-06 | Moore & Wright Pin Gauge Set 100pce 5.01-6.00x.01mm | 1 | |
| MW725-07 | Moore & Wright Pin Gauge Set 100pce 6.01-7.00x.01mm | 1 | |
| MW725-08 | Moore & Wright Pin Gauge Set 100pce 7.01-8.00x.01mm | 1 | |
| MW725-09 | Moore & Wright Pin Gauge Set 100pce 8.01-9.00x.01mm | 1 | |
| MW725-10 | Moore & Wright Pin Gauge Set 100pce 9.01-10.00x.01mm | 1 | |
| MZ23080000 | RIGGING PIN (11 EACH) | 13 | |
| OU190360 | OU190360 PIN-RIGGING, THS ACTUATOR MECHANICAL INPUT LEVER | 31 | |
| PWA 83043−9 | RIGGING PIN ("CRANK") (SUPERSEDES PWA 83043−1) | 1 | |
| PWA 85394 | RIG PIN (OPTIONAL TO PWA 86197) | 1 | |
| PWA25637 | RIGGING PIN - REAR COMP V.S.V_TO RIG VARIABLE STATOR VANE_150 X 100 X 80 MM / 0.46 KG_[PWA25637] | 5 | |
| PWA26176 | RIGGING PIN - HPC VARIABLE STATORS_150X100X80MM/0.46KG_[PWA26176] | 1 | |
| RBW6705G00132-3G | AW139 Main Rotor & Tail Rotor Rigging Pin Kit | 2 | |
| RBW6705G02031-3G | Rigging Pin Assembly N1 | 2 | |
| SPL-1585 | KIT OF RIGGING PINS ALL SYSTEMS SPL-1585 | 1 | |
| STC31555-5-3 | CHARGE RIG PIN V07132 ENGINE CHANGE KIT | 1 | |
| TSJ-1544300-13 | RIG PIN (PART OF TSJ-1544300) | 1 | |
| TSJ-1544300-14 | RIG PIN (PART OF TSJ-1544300) | 1 | |
| UT1315-1 | RIGGING PIN TELEFLEX CONTROL BRACKET RB211-535E4 | 3 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
