| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| J32036-9 | REMOVAL SHAFT | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 109-3130-82-139 | OUTPUT SHAFT BUSHING REMOVAL | 1 | |
| 109-3130-84-101 | TAIL ROTOR DRIVE SHAFT RING NUTS REMOVAL/INSTALLATION TOOL | 1 | |
| 109-3130-84-121 | TOOL ASSY, TAIL ROTOR DRIVE SHAFT RING NUTS REMOVAL/INSTALLATION | 1 | |
| 109-3130-85-101 | TOOL KIT,T/R PITCH CHANGE SHAFT DOUBLE BEARING REMOVAL/INSTL (NSCM A0126) | 1 | |
| 109-3400-95-1 | TOOL ASSEMBLY, 90° GEARBOX OUTPUT SHAFT SEAL REMOVAL | 1 | |
| 109-3401-59-101 | TOOL, ENGINE SHAFT REMOVAL/ INSTAL | 1 | |
| 109-3401-64-101 | ENGINE TRANSMISSION DRIVE SHAFT REMOVAL/INSTALLATION TOOL | 1 | |
| 109-3401-64-107 X1 | DRIVE SHAFT REMOVAL | 1 | |
| 109-3900-81-107 | ENGINE DIVE SHAFT REMOVAL TOOL | 1 | |
| 114-1610 | DRIVE SHAFT TOOL FOR REMOVAL OF A BEARING CUP | 1 | |
| 114-428 | CUP REMOVAL DRIVE SHAFT | 3 | |
| 114-903 | BEARING CUP REMOVAL DRIVE SHAFT | 1 | |
| 114-941 | BEARING CUP REMOVAL DRIVESHAFT | 1 | |
| 114-981 | CUP REMOVAL DRIVE SHAFT | 1 | |
| 11C3322 | FIXTURE - REMOVAL-HP COMPR ROTOR CONE SHAFT | 1 | |
| 11C3322G01 | FIXTURE, REMOVAL - HPC ROTOR FORWARD SHAFT | 1 | |
| 11C3421G02 | FIXTURE - REMOVAL AND INSTALLATION, FAN SHAFT COVER | 1 | |
| 11C3421G03 | FIXTURE - REMOVAL AND INSTALLATION, FAN SHAFT COVER | 1 | |
| 11C4248G01 | TOOL - REMOVAL AND INSTALLATION, HORIZONTAL DRIVE SHAFT | 1 | |
| 11C4248G02 | SPL-9992 - TOOL - REMOVAL AND INSTALLATION, HORIZONTAL DRIVE SHAFT | 1 | |
| 11C4690G01 | SPL-14482 - TOOL - REMOVAL AND INSTALLATION, HORIZONTAL DRIVE SHAFT COVER | 1 | |
| 11C4690G02 | SPL-14482 - TOOL - REMOVAL AND INSTALLATION, HORIZONTAL DRIVE SHAFT COVER | 1 | |
| 1901116 | SHAFT SEAL LOCATING SPACE REMOVAL TOOL | 1 | |
| 1R18093 | SHAFT REMOVAL A1 | 1 | |
| 1X46182024 | TOOLS FOR HUB SHAFT REMOVAL INSTALLATION RETORQUE OF HUB SHAFT NUT GROOVE NUT | 1 | |
| 2025254-2 | Shaft removal fixture | 1 | |
| 20252542 | SHAFT REMOVAL FIXTURE TOOL | 1 | |
| 2025261-1 | BEARING REMOVAL FIXTURE (REMOVES 3617585-001 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND 3822055-1 COUPLING SHAFT) | 1 | |
| 206-240-003-101 | DRIVE SHAFT REMOVAL TOOL ( K-FLEX) | 1 | |
| 212-240-002-101 | TOOL SET, DRIVESHAFT INSTALLATION AND REMOVAL | 1 | |
| 23054778 | Pusher – Radial Drive Gearshaft Bearing Removal | 1 | |
| 23063503 | PROP SHAFT SEAL REMOVAL TOOL | 2 | |
| 23076498 | STARTER SHAFT MECHANICAL CARBON SEAL – REMOVAL | 3 | |
| 269A9268 | Sleeve, 269A5609 Shaft Removal - Arbor Press | 1 | |
| 289093-1 | SUPPORT IMPELLER SHAFT REMOVAL | 1 | |
| 289746-1 | TOWER SHAFT REMOVAL TOOL | 1 | |
| 291040-1 | HOLDER AND DRIVER SHAFT REMOVAL | 1 | |
| 291986-1 | PLANET SHAFT REMOVAL FIXTURE | 1 | |
| 294866-10 | BEARING REMOVAL TOOL (LOCATES SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEARSHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | 1 | |
| 294866-6 | BEARING REMOVAL ADAPTER (LOCATES LARGER INSIDE DIAMETER OF 3860180-2 SPUR GEARSHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEARSHAFT FROM 3605094-1 BEARING | 1 | |
| 294866-7 | BEARING REMOVAL TOOL (USED TO LOCATE IN LARGER ID OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892576-1 BEARING) | 1 | |
| 294866-8 | BEARING REMOVAL TOOL (USED TO LOCATE IN SMALLER ID OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 294870-5 | BEARING REMOVAL PLATE (SUPPORTS 3605094-1 BEARING WHEN REMOVING 3860180-2 SPUR GEARSHAFT FROM BEARING) | 1 | |
| 294870-7 | BEARING REMOVAL PLATE (USED TO SUPPORT 892575-1 BEARING WHEN REMOVING 3860167-1 SPLINED SHAFT FROM BEARING) | 1 | |
| 294870-8 | BEARING REMOVAL PLATE (SUPPORTS 3605094-1 BEARING WHEN REMOVING 3860180-5, -6 SPUR GEARSHAFT FROM BEARING) | 1 | |
| 298079-1 | DRIVER, FAN SHAFT REMOVAL | 1 | |
| 2C141007G01 | TOOL, REMOVAL/INSTALL DRIVE SHAFT | 1 | |
| 2C14107G01 | FIXTURE, REMOVAL/INSTALL-AGB DRIVE SHAFT | 11 | |
| 2C14717G01 | DRIVE SHAFT REMOVAL TOOL | 4 | |
| 2C6010 | GUIDE, FAN SHAFT ASSY - INSTALL. & REMOVAL | 1 | |
| 2C6010 REV M | GUIDE, FAN SHAFT ASSY - INSTALL. & REMOVAL | 1 | |
| 2C6010G04TK | GUIDE, FAN SHAFT ASSEMBLY, INSTALLATION AND REMOVAL | 1 | |
| 2C6010G05 | GUIDE, FAN SHAFT ASSEMBLY, INSTALLATION AND REMOVAL | 3 | |
| 2C6122 | FIXTURE, INSTALL & REMOVAL - BOLTS, FWD FAN SHAFT | 1 | |
| 2C6122 REV G | FIXTURE, INSTALL & REMOVAL - BOLTS, FWD FAN SHAFT | 1 | |
| 2C6122G03 | FIXTURE, REMOVAL, BOLTS - FORWARD FAN SHAFT | 1 | |
| 2C6928G01TK | TOOL, REMOVAL-HORIZONTAL DRIVE SHAFT HOUSING | 1 | |
| 2C6936 | PLIERS, INSTALL & REMOVAL, RETAING RING-FAN SHAFT | 1 | |
| 2C6936 REV D | PLIERS, INSTALL. & REMOVAL, RETAINING RING-FAN SHAFT | 1 | |
| 5837203-1 | FAN AND STUB SHAFT ASSEMBLY HANDLING AND REMOVAL TOOL | 1 | |
| 64814 | DRIFT, ROCKER SHAFT BUSHING REMOVAL AND INSTALLATION | 1 | |
| 6796138 | DRIFT - SAFETY COUPLING OUTER MEMBER SHAFT BUSHING REMOVAL | 2 | |
| 6796183 | DRIFT - PROPELLER SHAFT PLUG REMOVAL | 1 | |
| 6872288 | FIXTURE - INSTALLATION AND REMOVAL, STARTER SHAFT SEAL | 1 | |
| 8077A | CRANKSHAFT HANGER BLADE BUSHING REMOVAL/INSTALLATION TOOL | 1 | |
| 8077B | CRANKSHAFT HANGER BLADE BUSHING REMOVAL/INSTALLATION TOOL | 1 | |
| 8077C | CRANKSHAFT COUNTERWEIGHT BUSHING REMOVAL / INSTALLER FIXTURE | 1 | |
| 833022-1 | SHAFT REMOVAL FIXURE | 1 | |
| 833978-5 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEAR SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | 1 | |
| 833978-9 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 834639-1 | SHAFT REMOVAL FIXTURE | 1 | |
| 835185-1A | Output Shaft Removal Tool | 1 | |
| 835331-1 | SHAFT REMOVAL FIXTURE | 1 | |
| 835842-1 | Shaft Removal Tool | 1 | |
| 856A 2362G01 | SECTOR TOOL SET-LPT SHAFT REMOVAL/INSTALATION | 4 | |
| 856A1492 | FIXTURE, REMOVAL - HP TURB FWD SHAFT BOLTS (HI TORQ) | 1 | |
| 856A1492G01 | FIXTURE, REMOVAL - HP TURB FWD SHAFT BOLTS | 1 | |
| 856A1492G02 | FIXTURE, REMOVAL - HP TURBINE FORWARD SHAFT BOLTS | 8 | |
| 856A2010 | FIXTURE,REMOVAL HP TURB FWD SHAFT BOLT | 1 | |
| 856A2010 G01 | FIXTURE, REMOVAL - HPT FORWARD SHAFT | 1 | |
| 856A2010G01 | HPT FORWARD SHAFT REMOVAL FIXTURE | 1 | |
| 856A2362G01 | SECTOR TOOL SET - LPT SHAFT REMOVAL/INSTALL | 4 | |
| 856A2573 | TOOL LPT SHAFT PLUG REMOVAL | 2 | |
| 856A2616G01 | SECTOR # CENTERING-LPT SHAFT FWD SEAL(TO CENTER LPT SHAFT RELATIVE TO FAN FRAME DURING NO. 1 AND NO. 2 BEARING SUPPORT MODULE REMOVAL/INSTALLATION) | 5 | |
| 856A2632G01 | LPT SHAFT REMOVAL PULLER - CFM56 | 23 | |
| 856A2655G03 | FIXTURE, INSTALL/REMOVAL OF RADIAL DRIVE SHAFT HOUSINGS | 5 | |
| 856A2718G01 | TOOL HORIZONTAL DRIVE SHAFT REMOVAL | 7 | |
| 856A2718G03 | TOOL HORIZONTAL DRIVE SHAFT REMOVAL | 9 | |
| 856A2746 | TOOL, REMOVAL DRIVE SHAFT | 1 | |
| 856A2746G01 | TOOL, REMOVAL - DRIVE SHAFT, LUBRICATION UNIT (REMOVAL TOOL) | 4 | |
| 856A3708G01 | INSTALLATION/REMOVAL RADIAL DRIVE SHAFT | 10 | |
| 8C2589 | FIXTURE, REMOVAL – HORIZONTAL SHAFT PROTECTOR | 1 | |
| 8C2590 | FIXTURE, REMOVAL – HORIZONTAL SHAFT | 1 | |
| 8G6510G00131 | TR DRIVE SHAFT N.1 REMOVAL TOOL | 1 | |
| 8G651OGOO131 | TR DRIVE SHAFT N.1 REMOVAL TOOL | 1 | |
| 8G7100G07831 | ENGINE DRIVE SHAFT REMOVAL TOOL | 1 | |
| 92700-10333-041 | TOOL, ENGINE DRIVE SHAFT REMOVAL | 1 | |
| 9C1913 | BEARING REMOVAL/PTO GEARSHAFT | 1 | |
| 9C2065 | BRG REMOVAL IDLER GEARSHAFT | 1 | |
| 9C3133 | CLAMP ASSY, REMOVAL-AGB SHAFT | 1 | |
| 9C3133G01 | REMOVAL TOOL – CALMP ASSY, HORIZONTAL DRIVE SHAFT 777-200F, -300ER | 1 | |
| 9C3133G02 | Removal Tool - Clamp Assembly, Horizontal Drive Shaft | 1 | |
| 9C3134 | CLAMP ASSY, REMOVAL-AGB SHAFT | 1 | |
| 9C3134G02 | TOOL REMOVAL FOR REMOVAL HORIZONTAL DRIVE SHAFT | 1 | |
| A27074-2 | SHAFT REMOVAL ASSY AND SPANNER | 1 | |
| A27128-2 | Shaft Removal Assy | 1 | |
| CS-710-213 | VALVE SHAFT REMOVAL TOOL | 1 | |
| CS-710-246 | SHAFT SEAL REMOVAL TOOL | 1 | |
| CS710-246 | SHAFT SEAL REMOVAL TOOL | 1 | |
| FY5-07170W09-01 | TOOL-REMOVAL-SLAT DRIVE SHAFT | 1 | |
| IAE1F10007 | PULLER, REMOVAL - ENGINE ASSY, ROTATING RING, STARTER / fuel & hydraulic pump SHAFT, GEARBOX | 12 | |
| IAE1F10008 | PULLER, REMOVAL - ENGINE ASSY, SEAL HOUSING, STARTER SHAFT, GEARBOX | 11 | |
| LM9000 | HORIZONTAL DRIVE SHAFT COVER REMOVAL TOOL LM9000 GAS TURBINE SUPPORT EQUIPMENT ACCESSORY GEARBOX REPLACEMENT EFFECTIVITY: LM9000 GAS TURBINE MODELS MANUFACTURER: BAKER HUGHES MANUFACTURER DOCUMENT NUMBER: GEK133968 | 1 | |
| LTCT14491-01 | Fixture, Carrier Assembly, Shaft Removal/Installation | 1 | |
| LTCT7604-01 | Tool, Removal, Gearshaft and Gear | 1 | |
| PWA108351 | ADAPTOR REMOVAL LPT SHAFT | 1 | |
| PWC37587 | Drift Sleeves Removal Stub Shaft Bolts | 2 | |
| R38 | HORIZONTAL SHAFT INST/REMOVAL TOOL | 2 | |
| RB T101306 | MAIN DRIVE SHAFT NUT REMOVAL TOOL | 2 | |
| RB T101732 | Lower Planetary Supprt Carrier Shaft Removal Or Install | 1 | |
| RB T101733 | Upper Planetary Spprt Carrier Shaft Removal Or Install | 1 | |
| RB T101953 | Bearing Removal Tail Rotor Shaft Plate Assembly | 1 | |
| RB T103042 | Engine Drive Shaft Removal Tool | 1 | |
| RB T103123 | Tail Rotor Drive Shaft Bearing Removal Split Plate Set | 1 | |
| RB T103310-101 | Freewheeling Assembly Removal Output Shaft | 3 | |
| RB92700-10333-041 | TOOL, ENGINE DRIVE SHAFT REMOVAL | 2 | |
| RBD25148-80901 | Output Shaft Bearing Removal Tool (Plate Only) | 1 | |
| RBT18803 | Lower Coupling Drive Shaft Boot Installation & Removal Tool | 1 | |
| RBT400205 | Drive Shaft Removal Tool ( K-Flex) | 3 | |
| RBT400262 | Tool Set, Driveshaft Installation and Removal | 1 | |
| RBW109-3130-84-101 | T/R Shaft Ring Nut Removal/Install | 2 | |
| RBW109-3400-95-1 | Tool Assembly, 90° Gearbox Output Shaft Seal Removal | 1 | |
| RBW109-3401-64-107 | Engine To Transmission Drive Shaft Install/Removal Tool | 1 | |
| RBW6500X01611W142B-3T | Shaft Support Bearing Removal | 1 | |
| SKSP1425 | INSTALL/ REMOVAL TOOL, MAIN DRIVESHAFT | 1 | |
| SKSP1425-501 | MAIN DRIVE SHAFT REMOVAL TOOL | 1 | |
| SKSP1489-101 | DRIVE SHAFT TOOL REMOVAL & INSTALLATION | 1 | |
| SWE 19404 | LPC SHAFT RETAINER REMOVAL | 1 | |
| T101303 | SOCKET, INPUT GEAR SHAFT AND MAST NUT REMOVAL AND INSTALLATION | 1 | |
| T101306 | MAIN DRIVE SHAFT NUT REMOVAL TOOL | 4 | |
| T103310-101 | FREEWHEELING ASSEMBLY REMOVAL OUTPUT SHAFT | 1 | |
| T88539 | Shaft removal Tool Set | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
