| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| C57004-2 | REMOVAL ASSEMBLY | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 109-3101-87-113 | TOOL ASSEMBLY, MAIN ROTOR GRIP BRUSHING REMOVAL/IN | 1 | |
| 109-3130-53-111 | TAIL ROTOR RING NUT TOOL REMOVAL ASSEMBLY | 1 | |
| 109-3130-54-111 | TAIL ROTOR RING NUT REMOVAL TOOL ASSEMBLY | 1 | |
| 109-3130-55-117 | TAIL ROTOR PITCH CHANGE SLIDER REMOVAL TOOL ASSEMBLY | 1 | |
| 109-3130-55-117 | TAIL ROTOR PITCH CHANGE SLIDER REMOVAL TOOL ASSEMBLY | 1 | |
| 109-3400-95-1 | TOOL ASSEMBLY, 90° GEARBOX OUTPUT SHAFT SEAL REMOVAL | 1 | |
| 114-1065 | Tool for removal/installation of torque plate bushing assembly | 2 | |
| 114-232 | SUPPORT TOOL FOR INSTALLATION OR REMOVAL OF THE BUSHING ASSEMBLY | 1 | |
| 114-233 | PUSHER TOOL FOR INSTALLATION AND REMOVAL OF THE BUSHING ASSEMBLY | 1 | |
| 114-299 | Pusher Tool for Removal and Installation of the Bushing Assembly | 1 | |
| 1159SEM20269-1 | RUDDER REMOVAL AND INSTALLATION HOIST ASSEMBLY | 1 | |
| 11C3321 | FIXTURE - REMOVAL-STAGE 2 HPT SHROUD/HANGER SUB-ASSEMBLY | 1 | |
| 139W00-500-01 | REMOVAL TOOL - BACKREST TABLE ASSEMBLY | 6 | |
| 139W00-500−01 | REMOVAL TOOL - BACKREST TABLE ASSEMBLY | 6 | |
| 139W00−500−01 | REMOVAL TOOL − BACKREST TABLE ASSEMBLY | 6 | |
| 190-S050-401 | SLEEVE PRESS/REMOVAL ASSEMBLY DEVICE | 1 | |
| 192T02951-401 | SLING ASSEMBLY, REMOVAL/INSTALLATION-PYLON | 1 | |
| 1C9423G04 | GUIDE, INSTALLATION/REMOVAL - COMBUSTION CHAMBER ASSEMBLY | 1 | |
| 2025261-1 | BEARING REMOVAL FIXTURE (REMOVES 3617585-001 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND 3822055-1 COUPLING SHAFT) | 1 | |
| 294737 | DRIVER-ASSEMBLY SEAL REMOVAL | 1 | |
| 876764 | DISC ASSEMBLY REMOVAL TOOL | 1 | |
| 2558816 | DRIVER ASSEMBLY KIT, OB BEARING CUP REMOVAL | 1 | |
| 2558817 | DRIVER ASSEMBLY KIT, IB BEARING CUP REMOVAL | 1 | |
| 2558818 | OB bearing cup assembly removal dr. | 3 | |
| 2558819 | IB BEARING CUP ASSEMBLY REMOVAL DRIVER | 4 | |
| 2558820 | OB BEARING CUP ASSEMBLY REMOVAL SNAP RING | 3 | |
| 2558821 | IB BEARING CUP ASSEMBLY REMOVAL SNAP RING | 3 | |
| 23034304 | MASK--BALANCE CUT, COMPRESSOR ROTOR IMPELLER LIMITS STOCK REMOVAL TO THE ACCEPTABLE AREAS WHEN BALANCING THE COMPRESSOR ROTOR ASSEMBLY. | 1 | |
| 257314-02 | SENSOR ASSEMBLY REMOVAL TOOL | 1 | |
| 258580-01 | SENSOR ASSEMBLY REMOVAL TOOL | 6 | |
| 266600LAT3 | ASSEMBLY TOOL/SEAT REMOVAL TOOL | 1 | |
| 269A9296 | Bar Assembly, 269A5050-11 Bearing Clip Removal | 1 | |
| 274030AT4 | BYPASS LAP ASSEMBLY REMOVAL | 1 | |
| 293246-1 | ADAPTER ASSEMBLY, HOIST, INSTALLATION AND REMOVAL | 1 | |
| 294927-1 | DRIVEN COMPRESSOR HOISTING ADAPTER AND HOUSING REMOVAL (TO LIFT DRIVEN COMPRESSOR ASSEMBLY DURING MAINTENANCE OPERATIONS) | 1 | |
| 2C14661G01 | FIXTURE, INSTALLATION/REMOVAL COMPRESSOR REAR FRAME ASSEMBLY | 2 | |
| 2C14661G02 | FIXTURE, REMOVAL COMPRESSOR EAR FRAME ASSEMBLY | 1 | |
| 2C18039G01 | TOOL ASSEMBLY, REMOVAL - FAN ROTOR SPINNER (TOOL ASSEMBLY) | 9 | |
| 2C6010G04TK | GUIDE, FAN SHAFT ASSEMBLY, INSTALLATION AND REMOVAL | 1 | |
| 2C6010G05 | GUIDE, FAN SHAFT ASSEMBLY, INSTALLATION AND REMOVAL | 3 | |
| 2C6968 | TOOL - ASSEMBLY REMOVAL | 1 | |
| 2OHME65B00117 | ASSEMBLY - SLING, AILERON REMOVAL/INSTALLATIION | 2 | |
| 2OHME65B00117 has replaced by G27060-1 | ASSEMBLY - SLING, AILERON REMOVAL/INSTALLATIION | 1 | |
| 350A93-3204-00 | REMOVAL - ROTOR BRAKE ASSEMBLY - ROTOR BRAKE | 1 | |
| 350A93-3205-00 | REMOVAL - ROTOR BRAKE ASSEMBLY - ROTOR BRAKE | 2 | |
| 3909AS1420-1 | APU OIL REMOVAL PUMP ASSEMBLY | 1 | |
| 5837203-1 | FAN AND STUB SHAFT ASSEMBLY HANDLING AND REMOVAL TOOL | 1 | |
| 62202-3600 | Right Angle Plug Assembly Stiffener Removal Tool | 1 | |
| 62202-4800 | I-PASS™ zHD Vertical Housing Assembly Removal Tool | 1 | |
| 62202-4900 | I-PASS™ zHD Wafer Assembly Removal Tool | 1 | |
| 62203-0080 | XFP Cage Assembly Removal Tool | 1 | |
| 63040005−1 | MLG Lock−Link Assembly − Removal/Installation (Sumitomo SE605) | 2 | |
| 6877026 | "COO WASHER ASSEMBLY/ DISASSEMBLY TOOL COMPRESSES SPRING IN CARTRIDGE VALVE FOR INSTALLATION/REMOVAL OF SLOTTED WASHER. | 1 | |
| 6877108 | ASSEMBLY FIXTURE ASSISTS REMOVAL OF CARTRIDGE VALVE FROM FUEL NOZZLE CARTRIDGE VALVE CAVITY USING AIR PRESSURE THROUGHTIP END. | 1 | |
| 6PME65B00162-1 | VERTICAL SUPPORT ASSEMBLY - NOSE LANDING GEAR REMOVAL AND INSTALLATION | 7 | |
| 8011487-508 | VALVE,ASSEMBLY-REMOVAL INSTALLATION | 1 | |
| 8011495-508 | VALVE ASSEMBLY REMOVAL INSTALLATION TOOL | 1 | |
| 831380-1 | BEARING REMOVAL MECHANICAL PULLER ASSEMBLY | 1 | |
| 833980-15 | BERAING REMOVAL PLATE ASSEMBLY | 1 | |
| 833980-16 | BEARING REMOVAL PLATE ASSEMBLY | 1 | |
| 833980-16/-19 | BEARING REMOVAL PLATE ASSEMBLY | 1 | |
| 833980-17 | BEARING REMOVAL PLATE ASSEMBLY | 1 | |
| 833980-17/-18 | BEARING REMOVAL PLATE ASSEMBLY | 1 | |
| 833980-18 | BEARING REMOVAL PLATE ASSEMBLY | 1 | |
| 833980-19 | BEARING REMOVAL PLATE ASSEMBLY | 1 | |
| 833980-2 | Bearing Removal Plate Assembly | 1 | |
| 834312-1 | Bearing Removal Plate Assembly | 1 | |
| 834443-1 | FAN PULLER (SUPPORTS 3826127-1 SEAL CARRIER DURING REMOVAL OF 3611175-1 SEAL ASSEMBLY SUPERSEDES 294880-1) | 1 | |
| 834447-1 | SEAL REMOVAL FIXTURE (SUPPORTS 3810187-2 BEARING INLET HOUSING ASSEMBLY DURING REMOVAL OF 3611175-1 | 1 | |
| 834772-2 | BEARING ASSEMBLY, REMOVAL | 1 | |
| 856A1431G03 | FIIXTURE, RESTRAINING-HPT NOZZLE ASSEMB(THE RESTRAIN FIXTURE IS USED TO RESTRAIN THE NOZZLE SEGMENTS OF THE HP TURBINE NOZZLE ASSEMBLY CIRCUMFERENTIALLY DURING THE INSTALLATION OR REMOVAL FROM THE COMPRESSOR REAR FRAME (CRF) | 7 | |
| 856A1816G01 | COMPRESSOR FRONT STATOR ASSEMBLY UPPER FRONT COMPRESSOR CASE REMOVAL | 9 | |
| 856A2705G01 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 1 | |
| 856A2705G02 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 3 | |
| 856A2705G03 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 4 | |
| 856A3430 | TOOL SET, REMOVAL - OIL TUBE AND PLUG, NO. 1 GEARSHAFT ASSEMBLY, AGB (REMOVAL TOOL SET) | 1 | |
| 856A3503G01 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 3 | |
| 856A3503G02 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 5 | |
| 8819349000 | ASSEMBLY AND REMOVAL TOOL | 1 | |
| 895-3101-32-101 | TOOL ASSEMBLY, REMOVAL | 1 | |
| 934826-1 | Bearing Removal Adapter Assembly | 1 | |
| 95SDSCC-D-0010 | INSTALL AND REMOVAL VALVE ASSEMBLY,UPPER PISTON | 1 | |
| 9C3133G01 | REMOVAL TOOL - CLAMP ASSEMBLY, HORIZONTAL DRIVE SHAFT | 1 | |
| 9C3133G02 | Removal Tool - Clamp Assembly, Horizontal Drive Shaft | 1 | |
| A78020-66 | HOIST EQUIPMENT - REMOVAL/INSTALLATION, INTEGRATED NOZZLE ASSEMBLY | 3 | |
| A813690T5 | DISC ASSEMBLY REMOVAL FIXTURE | 1 | |
| ABB999-30SE1 | Tool -Removal, Fuel Filter Assembly, GE90-70/80/90 Series And GE90-100 Series | 2 | |
| AC21866000 | TOOL FOR REMOVAL/INSTALLATION OF TORQUE PLATE BUSHING ASSEMBLY | 3 | |
| AJD070605-R | REMOVAL AND ASSEMBLY TOOL (AJD070605-R) | 1 | |
| AT-56005 | SPRING ASSEMBLY REMOVAL TOOL - NLG | 1 | |
| AT56005-1 | SPRING ASSEMBLY REMOVAL TOOL - NLG | 1 | |
| B28001-18 | ADAPTER ASSEMBLY - SUMP DRAIN VALVE REMOVAL | 17 | |
| B71046-1 | SLING ASSEMBLY - OVERHEAD REMOVAL/INSTALLATION, PW ENGINE | 7 | |
| C24003-1 | Tray Assembly - Battery, Removal and Installation | 18 | |
| C24003-9 | TRAY ASSEMBLY - BATTERY, REMOVAL AND INSTALLATION | 7 | |
| C27035-20 | SLING ASSEMBLY, RUDDER INSTALLATION AND REMOVAL | 18 | |
| C27056-19 | SLING ASSEMBLY, LEADING EDGE SLAT REMOVAL AND INSTALLATION | 10 | |
| C27056-35 | SLING ASSEMBLY, LEADING EDGE SLAT REMOVAL AND INSTALLATION | 9 | |
| C27085-1 | Removal/Installation Equipment - Tab Mechanism Assembly, Elevator Control | 18 | |
| C27086-1 | Spring Removal/Installation Equipment - Elevator Tab Mechanism Assembly | 13 | |
| C27086-27 | SPRING REMOVAL/INSTALLATION - ELEVATOR TAB MECHANISM ASSEMBLY | 8 | |
| C32015-1 | MAIN LANDING GEAR FORWARD TRUNNION BEARING ASSEMBLY REMOVAL | 14 | |
| C32028-1 | Removal/Installation Equipment - Walking Beam Assembly, Main Landing Gear | 4 | |
| C32028-109 | REMOVAL/INSTALLATION EQUIPMENT - WALKING BEAM ASSEMBLY, MAIN LANDING GEAR (CE) | 10 | |
| C32028-110 | REMOVAL/INSTALLATION EQUIPMENT - WALKING BEAM ASSEMBLY, MAIN LANDING GEAR (CE) | 7 | |
| C32028-111 | REMOVAL/INSTALLATION EQUIPMENT - WALKING BEAM ASSEMBLY, MAIN LANDING GEAR (CE) | 10 | |
| C32028-121 | REMOVAL/INSTALLATION EQUIPMENT - WALKING BEAM ASSEMBLY, MAIN LANDING GEAR | 1 | |
| C32028-3 | Removal/Installation Equipment - Walking Beam Assembly, Main Landing Gear | 4 | |
| C32028-56 | Removal/Installation Equipment - Walking Beam Assembly, Main Landing Gear | 8 | |
| C32028-58 | Removal/Installation Equipment - Walking Beam Assembly, Main Landing Gear | 6 | |
| C32028-59 | Removal/Installation Equipment - Walking Beam Assembly, Main Landing Gear | 11 | |
| C32029-8 | SLUG DRIVER ASSEMBLY PIN INSTALLATION/REMOVAL KIT MLG | 3 | |
| C32029-87 | MAIN LANDING GEAR PIN REMOVAL/ASSEMBLY TOOL KIT | 6 | |
| C32049-1 | Outrigger Assembly - Removal and Installation/Ground Handling, Nose Landing Gear | 16 | |
| C32060-1 | RESTRAIN AND PIN REMOVAL KIT - LEVER ASSEMBLY, PIVOT PIN, AND LEVER LINK PIN, MAIN LANDING GEAR | 2 | |
| C32077-1 | REMOVAL TOOL ASSEMBLY - GLAND NUT, MAIN LANDING GEAR | 5 | |
| C44001-55 | REMOVAL/INSTALLATION EQUIPMENT - BROADBAND ANTENNA (ASSEMBLY IS INCLUDED IN KIT 44001) | 6 | |
| C53002-1 | REMOVAL/INSTALLATION ASSEMBLY - TAIL CONE (CE) | 8 | |
| C57004-1 | REMOVAL EQUIPMENT - SECONDARY TORQUE TUBE, INBOARD MAIN FLAP ASSEMBLY | 1 | |
| C71033 | INSTALLATION/REMOVAL FRAME ASSEMBLY - INLET COWL | 1 | |
| C71033 | Installation/Removal Frame Assembly - Inlet Cowl | 1 | |
| C71033-1 | INSTALLATION/REMOVAL FRAME ASSEMBLY - INLET COWL | 8 | |
| DRK520B | Removal Tool Handle Assembly - M81969/30-20 REV B | 2 | |
| F27174000 | Installation/Removal of bush assembly on/from torque tube | 1 | |
| F27219000 | Removal of bush assembly on/from torque pin | 2 | |
| F27271000 | BEARING CUP REMOVAL / ASSEMBLY TOOL | 2 | |
| F27272000 | TOOL, BEARING CUP ASSEMBLY/REMOVAL | 2 | |
| F27701000 | INSULATION ASSEMBLY REMOVAL | 4 | |
| F72849-1 | ADAPTER ASSEMBLY-BRAKE INST & REMOVAL | 2 | |
| F80047-1 | Tool Assembly -Removal. Horizontal Stabilizer Hinge Pin | 10 | |
| F80118-5 | BEARING RETENTION/REMOVAL BODY ASSEMBLY (ACCESSORY TO F80118-1 KIT) | 1 | |
| FBR-175-81010-A | BUSHING REMOVAL ASSEMBLY | 1 | |
| FBR-472-81010-A | BUSHING REMOVAL ASSEMBLY | 1 | |
| G27010-1 | SLING ASSEMBLY, LOWER RUDDER INSTALLATION AND REMOVAL (CE) | 1 | |
| G27010-25 | SLING ASSEMBLY, LOWER RUDDER INSTALLATION AND REMOVAL (CE) | 6 | |
| G27012-44 | UPPER RUDDER SLING ASSEMBLY INSTALLATION AND REMOVAL | 7 | |
| G27047-1 | INSTALLATION AND REMOVAL SLING EQUIPMENT - MAIN CARRIAGE ASSEMBLY, TRAILING EDGE FLAPS (CE) | 1 | |
| G27047-54 | INSTALLATION AND REMOVAL SLING EQUIPMENT - MAIN CARRIAGE ASSEMBLY, TRAILING EDGE FLAPS (CE) | 4 | |
| G27047-59 | INSTALLATION AND REMOVAL SLING EQUIPMENT - MAIN CARRIAGE ASSEMBLY, TRAILING EDGE FLAPS (CE) | 2 | |
| G27047-63 | INSTALLATION AND REMOVAL SLING EQUIPMENT - MAIN CARRIAGE ASSEMBLY, TRAILING EDGE FLAPS | 1 | |
| G27060-1 | ASSEMBLY - SLING, AILERON REMOVAL/INSTALLATIION | 5 | |
| G27075-1 | HOIST FRAME EQUIPMENT - UPPER AND LOWER RUDDER POWER CONTROL ASSEMBLY (PCA) REMOVAL/INSTALLATION (CE) | 2 | |
| G32054-1 | SLING ASSEMBLY - WING LANDING GEAR AND BODY LANDING GEAR DOORS, REMOVAL AND INSTALLATION | 2 | |
| G57010-1 | Sling Assembly -Wing Maintenance Interface Control (Mic) Tip. Removal/Installation (Ce) | 1 | |
| G57010-25 | SLING ASSEMBLY - WING MAINTENANCE INTERFACE CONTROL (MIC) TIP, REMOVAL/INSTALLATION (CE) | 3 | |
| GS47482 | ASSEMBLY INNER REMOVAL JAWS | 1 | |
| GS47483 | ASSEMBLY OUTER REMOVAL JAWS | 1 | |
| GSE56509 | Aft pintle spherical bearing assembly removal tool | 1 | |
| HU37594 | EXTRACTOR ADAPTER-SLIDER ASSEMBLY FROM F&ADAPTER - CHOCKING PAD AND SLIDER, REMOVAL | 14 | |
| HU44819 | EXTRACTOR ADAPTER-SLIDER ASSEMBLY FROM F&ADAPTER - CHOCKING PAD AND SLIDER, REMOVAL | 10 | |
| HU55108-4 | SLING,ASSEMBLY,FOR REMOVAL/INSTALLATION | 2 | |
| IAE 1P16058 | REMOVAL/INSTALLATION JAWS ASSEMBLY | 2 | |
| IAE 1P17022 | IAE 1P17022 REMOVAL/INSTALLATION JAWS ASSEMBLY | 1 | |
| IAE1P16058 | IAE 1P16058 REMOVAL/INSTALLATION JAWS ASSEMBLY | 2 | |
| IAE1P17022 | REMOVAL/INSTALL JAWS ASSEMBLY | 1 | |
| J27008-1 | Sling Assembly - Outboard Aileron Removal & Installation | 6 | |
| J27008-13 | ASSEMBLY - SLING, AILERON REMOVAL/INSTALLATION | 6 | |
| J32036-21 | Drift Removal Assembly | 2 | |
| J32036-46 | Drift Removal Assembly | 1 | |
| J32036-60 | PULLER ASSEMBLY - REMOVAL/ INSTALLATION, AFT TRUNNION PIN | 1 | |
| J32036-61 | Drift Removal Assembly | 1 | |
| J52046-2 | STRONGBACK / FITTING ASSEMBLY - MAIN LANDING GEAR DOOR, REMOVAL AND INSTALLATION | 1 | |
| LTCT14130-01 | Puller Assembly, Seal Removal | 1 | |
| LTCT14491-01 | Fixture, Carrier Assembly, Shaft Removal/Installation | 1 | |
| LTCT14769-01 | Tool Assembly, Fan Exit Vane Assembly, Removal/Installation | 1 | |
| LTCT7331-01 | Sealing Plate and Blades Removal Assembly | 1 | |
| M65726786-010 | DUAL HEAT EXCHANGER ASSEMBLY REMOVAL TOOL | 1 | |
| M65726787-010 | AIR CYCLE MACHINE ASSEMBLY REMOVAL TOOL | 1 | |
| M81969-1401 | REMOVAL/ASSEMBLY TOOL FOR ELECTRICAL PINS | 40 | |
| M81969-1403 | REMOVAL/ASSEMBLY TOOL FOR ELECTRICAL PINS | 34 | |
| MIT140Z4372-3 | INSERT/REMOVAL ASSEMBLY | 1 | |
| MIT65B01202-1 | U/C WHEEL REMOVAL ADAPTOR ASSEMBLY | 10 | |
| MIT65B25952 | CRADLE ASSEMBLY - INSTALLATION/REMOVAL, AUXILIARY FUEL TANK | 1 | |
| MS16633-2018 | RETAINING RING ([3] REQUIRED FOR REMOVAL OR INSTALLATION OF COLLECTIVE SPRING ASSEMBLY. | 1 | |
| OHME65B10910 | SLING ASSEMBLY - WING LANDING GEAR AND BODY LANDING GEAR DOORS, REMOVAL AND INSTALLATION | 4 | |
| OHME65B81843-1 | SLING ASSEMBLY - HOIST INBOARD AILERON POWER CONTROL UNIT INSTALLATION/REMOVAL | 9 | |
| OS22835 | ASSEMBLY/REMOVAL TOOL | 2 | |
| PWA111933 | DRIFT, REMOVAL DISSASSEMBLY BLADES STG 1,2,3 | 1 | |
| PWA88231 | PULLER - JACKSCREW, ENGINE ASSEMBLY, OIL TANK REMOVAL | 1 | |
| PWC38088 | FIXTURE, LP DIFFUSER ASSEMBLY REMOVAL | 1 | |
| PWC56335 | FIXTURE, LP DIFFUSER ASSEMBLY REMOVAL | 1 | |
| Q21976 | SUPPORT FOR THE REMOVAL AND INSTALLATION OF THE ACTUATOR ASSEMBLY | 3 | |
| RB T101366 | Bearing Removal Generator Quill Transmission Plate Assembly | 1 | |
| RB T101446 | Quill Transmission Plate Assembly Bearing & Nut Removal | 1 | |
| RB T101591 | Bearing Removal Plate Assembly | 1 | |
| RB T101730 | Upper Planetary Assembly Install Or Removal Tool Set | 1 | |
| RB T101731 | Bearing Install Or Removal Lower Plntry Assembly Tool Set | 1 | |
| RB T101953 | Bearing Removal Tail Rotor Shaft Plate Assembly | 1 | |
| RB T102062 | Bearing Quill Assembly Removal Bar | 1 | |
| RB T102075 | Mast Bearing Install & Removal Plate Assembly | 1 | |
| RB T102085 | Bearing Removal & Anti Torque Device Plate Assembly | 1 | |
| RB T103266-101 | Transmission Assembly Bearing Removal/Install Tool | 1 | |
| RB T103310-101 | Freewheeling Assembly Removal Output Shaft | 3 | |
| RB T103324-101 | DRIVER BEARING REMOVAL FREEWHEELING ASSEMBLY | 2 | |
| RB T103331-101 | DRIVER BEARING REMOVAL FREEWHEELING ASSEMBLY | 2 | |
| RB T103393 | Clutch Assembly Removal Tool Set | 1 | |
| RB429WA-MM-62-25-1-2 | Idler Link Assembly Bushing Removal Work Aid #1 | 1 | |
| RB429WA-MM-62-25-2-2 | Idler Link Assembly Bushing Removal Work Aid #2 | 1 | |
| RB6796941-201 | Puller Assembly/Starter Seal Removal Tool | 2 | |
| RBT18016 | Idler Link Assembly Bushing Removal Work Aid Kit | 2 | |
| RBW109-3101-87-113 | Tool Assembly, Main Rotor Grip Brushing Removal/Install | 2 | |
| RBW109-3130-53-111 | Tail Rotor Ring Nut Tool Removal Assembly | 2 | |
| RBW109-3130-54-111 | Tail Rotor Ring Nut Removal Tool Assembly | 2 | |
| RBW109-3130-55-117 | Tail Rotor Pitch Change Slider Removal Tool Assembly | 2 | |
| RBW109-3130-87-103 | Tool Assembly, Tail Rotor Hub Bushings Removal | 2 | |
| RBW109-3400-95-1 | Tool Assembly, 90° Gearbox Output Shaft Seal Removal | 1 | |
| RBW895-3101-32- 101 | TOOL ASSEMBLY, REMOVAL | 2 | |
| RBW895-3101-32-101 | Tool Assembly, Removal | 2 | |
| RRT097025 | AID ASSEMBLY & REMOVAL OF WEIGHT VALVES INTO FUEL SPRAY NOZZLES | 1 | |
| RRT104638 | ASSEMBLY TOOL - INSTALLATION / REMOVAL OF LOWER SPLITTER FAIRING. | 1 | |
| SE-28-1103 | ADAPTER ASSEMBLY - SUMP DRAIN VALVE REMOVAL | 2 | |
| SE28-1103 | Adapter Assembly - Sump Drain Valve Removal | 2 | |
| SMO415431 | STARTING SKID STANDARD ASSEMBLY/REMOVAL TOOL (BAKER HUGHES) | 1 | |
| SPL-2033 | SLING ASSEMBLY, RUDDER INSTALLATION AND REMOVAL | 1 | |
| SPL-2041 | SLING ASSEMBLY, LEADING EDGE SLAT REMOVAL AND INSTALLATION | 1 | |
| ST2220-3-34A-1 | HANDLE ASSEMBLY REMOVAL TOOL | 1 | |
| ST2220-3-34A-2 | HANDLE ASSEMBLY, REMOVAL | 1 | |
| ST93487 | Removal Tool Guide and Valve Assembly | 1 | |
| T101504 | PLATE ASSEMBLY, BEARING REMOVAL, ACCESSORY DRIVE | 1 | |
| T101591 | BEARING REMOVAL PLATE ASSEMBLY | 1 | |
| T101592 | PLATE ASSEMBLY, QUILL BEARING REMOVAL | 1 | |
| T101953 | BEARING REMOVAL TAIL ROTOR SHAFT PLATE ASSEMBLY | 1 | |
| T102075 | MAST BEARING INSTALL & REMOVAL PLATE ASSEMBLY | 1 | |
| T103307-101 | SEAL INSTALLATION AND REMOVAL TOOL FREEWHEEL ASSEMBLY | 1 | |
| T103310-101 | FREEWHEELING ASSEMBLY REMOVAL OUTPUT SHAFT | 1 | |
| T103324-101 | DRIVER BEARING REMOVAL FREEWHEELING ASSEMBLY | 1 | |
| T103331-101 | DRIVER BEARING REMOVAL FREEWHEELING ASSEMBLY | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
